Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Andrew Morton]

On Sat, 13 Oct 2007 02:37:35 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=9155
> 
>            Summary: No fan control with ATI Radeon display support on HP
>                     nx6125.
>            Product: Drivers
>            Version: 2.5
>      KernelVersion: 2.6.22, 2.6.23
>           Platform: All
>         OS/Version: Linux
>               Tree: Mainline
>             Status: NEW
>           Severity: low
>           Priority: P1
>          Component: Video(Other)
>         AssignedTo: drivers_video-other@kernel-bugs.osdl.org
>         ReportedBy: daniel.wuerfel@gmx.net
> 
> 
> Most recent kernel where this bug did not occur:2.6.21
> Distribution:gentoo
> Hardware Environment:HP nx6125 BIOS version F.11
> Software Environment:Gnome 2.18, ati-driver 8.40.4
> Problem Description:If you enable "support for frame buffer devices", "Vesa vga
> graphics support" and "ati radeon display support" under "graphics support" so
> you lost fan cantrol on your hp nx6125, that means the fan doens't stop
> working.
> 
> Steps to reproduce:Enable "support for frame buffer devices", "Vesa vga
> graphics support" and "ati radeon display support" under "graphics support" on
> your hp nx6125 and after the next boot the fan will not switched off.
> 

Does anyone know whether this is likely to be a radeon driver bug or an
acpi bug or something else??

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Rafael J. Wysocki]

On Saturday, 13 October 2007 19:53, Andrew Morton wrote:
> On Sat, 13 Oct 2007 02:37:35 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:
> 
> > Most recent kernel where this bug did not occur:2.6.21
> > Distribution:gentoo
> > Hardware Environment:HP nx6125 BIOS version F.11
> > Software Environment:Gnome 2.18, ati-driver 8.40.4

Looks like the binary ATI driver is used.

> > Problem Description:If you enable "support for frame buffer devices", "Vesa vga
> > graphics support" and "ati radeon display support" under "graphics support" so
> > you lost fan cantrol on your hp nx6125, that means the fan doens't stop
> > working.
> > 
> > Steps to reproduce:Enable "support for frame buffer devices", "Vesa vga
> > graphics support" and "ati radeon display support" under "graphics support" on
> > your hp nx6125 and after the next boot the fan will not switched off.
> > 
> 
> Does anyone know whether this is likely to be a radeon driver bug or an
> acpi bug or something else??

It looks like a thermal issue to me, so I'd say ACPI or the ATI driver (or the
combination of the two).

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Daniel Würfel]

Hi there,

at first great respect for your fast answers. 
I don't think, that the binary ati driver is the problem, because:
1. with switched of "ati radeon display support" in the kernel, the fan
control works correctly (and i still using the ati-driver)
2. the fan starts spinning at the boot screen even if the radeon display
driver was loaded (and the ati driver is not just loaded yet). Here you
see the difference between 2.6.21, when it all works correctly, and
2.6.22 and 2.6.23: the screen resolution of the boot screen changed to
the native resolution 1024x768 (in 2.6.21 it still the default terminal
resolution) 

Am Samstag, den 13.10.2007, 20:30 +0200 schrieb Rafael J. Wysocki:
> On Saturday, 13 October 2007 19:53, Andrew Morton wrote:
> > On Sat, 13 Oct 2007 02:37:35 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:
> > 
> > > Most recent kernel where this bug did not occur:2.6.21
> > > Distribution:gentoo
> > > Hardware Environment:HP nx6125 BIOS version F.11
> > > Software Environment:Gnome 2.18, ati-driver 8.40.4
> 
> Looks like the binary ATI driver is used.
> 
> > > Problem Description:If you enable "support for frame buffer devices", "Vesa vga
> > > graphics support" and "ati radeon display support" under "graphics support" so
> > > you lost fan cantrol on your hp nx6125, that means the fan doens't stop
> > > working.
> > > 
> > > Steps to reproduce:Enable "support for frame buffer devices", "Vesa vga
> > > graphics support" and "ati radeon display support" under "graphics support" on
> > > your hp nx6125 and after the next boot the fan will not switched off.
> > > 
> > 
> > Does anyone know whether this is likely to be a radeon driver bug or an
> > acpi bug or something else??
> 
> It looks like a thermal issue to me, so I'd say ACPI or the ATI driver (or the
> combination of the two).

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Rafael J. Wysocki]

On Sunday, 14 October 2007 09:26, Daniel Würfel wrote:
> Hi there,
> 
> at first great respect for your fast answers. 
> I don't think, that the binary ati driver is the problem, because:
> 1. with switched of "ati radeon display support" in the kernel, the fan
> control works correctly (and i still using the ati-driver)

How do you know, however, that the "ati radeon display support" in the kernel
does not interfere with the ATI driver in a destructive way?

> 2. the fan starts spinning at the boot screen even if the radeon display
> driver was loaded (and the ati driver is not just loaded yet).

I'm not sure what you mean exactly.  Can you clarify, please?

> Here you see the difference between 2.6.21, when it all works correctly, and
> 2.6.22 and 2.6.23: the screen resolution of the boot screen changed to
> the native resolution 1024x768 (in 2.6.21 it still the default terminal
> resolution) 

This only means that the kernel's radeon driver has changed.

It's difficult to say what's going wrong.

What's the CPU load when the fan is spinning?

Greetings,
Rafael

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Daniel Würfel]

Am Sonntag, den 14.10.2007, 16:02 +0200 schrieb Rafael J. Wysocki:
> On Sunday, 14 October 2007 09:26, Daniel Würfel wrote:
> > Hi there,
> > 
> > at first great respect for your fast answers. 
> > I don't think, that the binary ati driver is the problem, because:
> > 1. with switched of "ati radeon display support" in the kernel, the fan
> > control works correctly (and i still using the ati-driver)
> 
> How do you know, however, that the "ati radeon display support" in the kernel
> does not interfere with the ATI driver in a destructive way?

I think, but im not sure, that the ati driver is loaded, if X was
started. But at this moment X was not started.
> 
> > 2. the fan starts spinning at the boot screen even if the radeon display
> > driver was loaded (and the ati driver is not just loaded yet).
> 
> I'm not sure what you mean exactly.  Can you clarify, please?dann

Well, i see it looks a little bit confused what i wrote. What i mean is,
that the fan at this time starts to rotate, when the "radeon display
support" is loaded at boot time. Normally the fan should start to work
if a special temperature threshold is reached. 
> 
> > Here you see the difference between 2.6.21, when it all works correctly, and
> > 2.6.22 and 2.6.23: the screen resolution of the boot screen changed to
> > the native resolution 1024x768 (in 2.6.21 it still the default terminal
> > resolution) 
> 
> This only means that the kernel's radeon driver has changed.
> 
> It's difficult to say what's going wrong.
> 
> What's the CPU load when the fan is spinning?
> 
> Greetings,
> Rafael

The rest of the systems works fine. I notice no anomaly.

Greetings,
Daniel

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Daniel Würfel]

Am Sonntag, den 14.10.2007, 16:02 +0200 schrieb Rafael J. Wysocki:
> On Sunday, 14 October 2007 09:26, Daniel Würfel wrote:
> > Hi there,
> > 
> > at first great respect for your fast answers. 
> > I don't think, that the binary ati driver is the problem, because:
> > 1. with switched of "ati radeon display support" in the kernel, the fan
> > control works correctly (and i still using the ati-driver)
> 
> How do you know, however, that the "ati radeon display support" in the kernel
> does not interfere with the ATI driver in a destructive way?

I think, but im not sure, that the ati driver is loaded, if X was
started. But at this moment X was not started.
> 
> > 2. the fan starts spinning at the boot screen even if the radeon display
> > driver was loaded (and the ati driver is not just loaded yet).
> 
> I'm not sure what you mean exactly.  Can you clarify, please?dann

Well, i see it looks a little bit confused what i wrote. What i mean is,
that the fan at this time starts to rotate, when the "radeon display
support" is loaded at boot time. Normally the fan should start to work
if a special temperature threshold is reached. 
> 
> > Here you see the difference between 2.6.21, when it all works correctly, and
> > 2.6.22 and 2.6.23: the screen resolution of the boot screen changed to
> > the native resolution 1024x768 (in 2.6.21 it still the default terminal
> > resolution) 
> 
> This only means that the kernel's radeon driver has changed.
> 
> It's difficult to say what's going wrong.
> 
> What's the CPU load when the fan is spinning?
> 
> Greetings,
> Rafael

The rest of the systems works fine. I notice no anomaly.

Greetings,
Daniel

-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Rafael J. Wysocki]

On Sunday, 14 October 2007 16:18, Daniel Würfel wrote:
> Am Sonntag, den 14.10.2007, 16:02 +0200 schrieb Rafael J. Wysocki:
> > On Sunday, 14 October 2007 09:26, Daniel Würfel wrote:
> > > Hi there,
> > > 
> > > at first great respect for your fast answers. 
> > > I don't think, that the binary ati driver is the problem, because:
> > > 1. with switched of "ati radeon display support" in the kernel, the fan
> > > control works correctly (and i still using the ati-driver)
> > 
> > How do you know, however, that the "ati radeon display support" in the kernel
> > does not interfere with the ATI driver in a destructive way?
> 
> I think, but im not sure, that the ati driver is loaded, if X was
> started. But at this moment X was not started.

Well, the kernel module part is probably loaded earlier.
 
> > > 2. the fan starts spinning at the boot screen even if the radeon display
> > > driver was loaded (and the ati driver is not just loaded yet).
> > 
> > I'm not sure what you mean exactly.  Can you clarify, please?dann
> 
> Well, i see it looks a little bit confused what i wrote. What i mean is,
> that the fan at this time starts to rotate, when the "radeon display
> support" is loaded at boot time.

I see.

Can you please check:
- What happens if you don't use the ATI driver at all (please unload its kernel
  module before loading the kernel's radeon one)?
- Does the loading of the radeon module trigger the fan automatically?
- What happens if the fan module is not loaded at that time?
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Daniel Würfel]

Am Sonntag, den 14.10.2007, 21:55 +0200 schrieb Rafael J. Wysocki:
> On Sunday, 14 October 2007 16:18, Daniel Würfel wrote:
> > Am Sonntag, den 14.10.2007, 16:02 +0200 schrieb Rafael J. Wysocki:
> > > On Sunday, 14 October 2007 09:26, Daniel Würfel wrote:
> > > > Hi there,
> > > > 
> > > > at first great respect for your fast answers. 
> > > > I don't think, that the binary ati driver is the problem, because:
> > > > 1. with switched of "ati radeon display support" in the kernel, the fan
> > > > control works correctly (and i still using the ati-driver)
> > > 
> > > How do you know, however, that the "ati radeon display support" in the kernel
> > > does not interfere with the ATI driver in a destructive way?
> > 
> > I think, but im not sure, that the ati driver is loaded, if X was
> > started. But at this moment X was not started.
> 
> Well, the kernel module part is probably loaded earlier.
>  
> > > > 2. the fan starts spinning at the boot screen even if the radeon display
> > > > driver was loaded (and the ati driver is not just loaded yet).
> > > 
> > > I'm not sure what you mean exactly.  Can you clarify, please?dann
> > 
> > Well, i see it looks a little bit confused what i wrote. What i mean is,
> > that the fan at this time starts to rotate, when the "radeon display
> > support" is loaded at boot time.
> 
> I see.
> 
> Can you please check:
> - What happens if you don't use the ATI driver at all (please unload its kernel
>   module before loading the kernel's radeon one)?
> - Does the loading of the radeon module trigger the fan automatically?
> - What happens if the fan module is not loaded at that time?

I think i got the problem:
I made some test. The problem is the module radeonfb. If i compile
radeonfb as a module there is no problem with the fan control. But if i
compile it into the kernel, than fan control will be destroyed and the
fan doesn't stop working from the beginning of the system start. 
The other modules (fglrx, agp_gart) have no influence to the fan
behaviour.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Linux-fbdev-devel mailing list
Linux-fbdev-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Rafael J. Wysocki]

On Monday, 15 October 2007 19:12, Daniel Würfel wrote:
> Am Sonntag, den 14.10.2007, 21:55 +0200 schrieb Rafael J. Wysocki:
> > On Sunday, 14 October 2007 16:18, Daniel Würfel wrote:
> > > Am Sonntag, den 14.10.2007, 16:02 +0200 schrieb Rafael J. Wysocki:
> > > > On Sunday, 14 October 2007 09:26, Daniel Würfel wrote:
> > > > > Hi there,
> > > > > 
> > > > > at first great respect for your fast answers. 
> > > > > I don't think, that the binary ati driver is the problem, because:
> > > > > 1. with switched of "ati radeon display support" in the kernel, the fan
> > > > > control works correctly (and i still using the ati-driver)
> > > > 
> > > > How do you know, however, that the "ati radeon display support" in the kernel
> > > > does not interfere with the ATI driver in a destructive way?
> > > 
> > > I think, but im not sure, that the ati driver is loaded, if X was
> > > started. But at this moment X was not started.
> > 
> > Well, the kernel module part is probably loaded earlier.
> >  
> > > > > 2. the fan starts spinning at the boot screen even if the radeon display
> > > > > driver was loaded (and the ati driver is not just loaded yet).
> > > > 
> > > > I'm not sure what you mean exactly.  Can you clarify, please?dann
> > > 
> > > Well, i see it looks a little bit confused what i wrote. What i mean is,
> > > that the fan at this time starts to rotate, when the "radeon display
> > > support" is loaded at boot time.
> > 
> > I see.
> > 
> > Can you please check:
> > - What happens if you don't use the ATI driver at all (please unload its kernel
> >   module before loading the kernel's radeon one)?
> > - Does the loading of the radeon module trigger the fan automatically?
> > - What happens if the fan module is not loaded at that time?
> 
> I think i got the problem:
> I made some test. The problem is the module radeonfb. If i compile
> radeonfb as a module there is no problem with the fan control. But if i
> compile it into the kernel, than fan control will be destroyed and the
> fan doesn't stop working from the beginning of the system start. 
> The other modules (fglrx, agp_gart) have no influence to the fan
> behaviour.

Thanks for having narrowed this, good job.

Now, the question is why the radeonfb compiled in statically has this effect.

Can you please attach your current .config to the bugzilla entry?
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Benjamin Herrenschmidt]

On Mon, 2007-10-15 at 22:32 +0200, Rafael J. Wysocki wrote:
> 
> Thanks for having narrowed this, good job.
> 
> Now, the question is why the radeonfb compiled in statically has this effect.
> 
> Can you please attach your current .config to the bugzilla entry?

I don't have the beginning of an idea of why radeonfb would cause that
indeed. (And especially not cause it when compiled as a module).

Ben.



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Rafael J. Wysocki]

On Monday, 15 October 2007 22:57, Benjamin Herrenschmidt wrote:
> 
> On Mon, 2007-10-15 at 22:32 +0200, Rafael J. Wysocki wrote:
> > 
> > Thanks for having narrowed this, good job.
> > 
> > Now, the question is why the radeonfb compiled in statically has this effect.
> > 
> > Can you please attach your current .config to the bugzilla entry?
> 
> I don't have the beginning of an idea of why radeonfb would cause that
> indeed. (And especially not cause it when compiled as a module).

Me too, but I suspect an initialization ordering issue (or something along
these lines).

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

Re: [Bugme-new] [Bug 9155] New: No fan control with ATI Radeon display support on HP nx6125.

[Andrew Morton]

On Sat, 13 Oct 2007 02:37:35 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:

> http://bugzilla.kernel.org/show_bug.cgi?id=9155
> 
>            Summary: No fan control with ATI Radeon display support on HP
>                     nx6125.
>            Product: Drivers
>            Version: 2.5
>      KernelVersion: 2.6.22, 2.6.23
>           Platform: All
>         OS/Version: Linux
>               Tree: Mainline
>             Status: NEW
>           Severity: low
>           Priority: P1
>          Component: Video(Other)
>         AssignedTo: drivers_video-other@kernel-bugs.osdl.org
>         ReportedBy: daniel.wuerfel@gmx.net
> 
> 
> Most recent kernel where this bug did not occur:2.6.21
> Distribution:gentoo
> Hardware Environment:HP nx6125 BIOS version F.11
> Software Environment:Gnome 2.18, ati-driver 8.40.4
> Problem Description:If you enable "support for frame buffer devices", "Vesa vga
> graphics support" and "ati radeon display support" under "graphics support" so
> you lost fan cantrol on your hp nx6125, that means the fan doens't stop
> working.
> 
> Steps to reproduce:Enable "support for frame buffer devices", "Vesa vga
> graphics support" and "ati radeon display support" under "graphics support" on
> your hp nx6125 and after the next boot the fan will not switched off.
> 

Does anyone know whether this is likely to be a radeon driver bug or an
acpi bug or something else??

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/