* Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I
2009-03-04 13:38 [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I help Zbigniew Luszpinski
@ 2009-03-04 14:21 ` Jean Delvare
2009-03-04 21:13 ` Zbigniew Luszpinski
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jean Delvare @ 2009-03-04 14:21 UTC (permalink / raw)
To: lm-sensors
Hi Zbiggy,
On Wed, 4 Mar 2009 14:38:45 +0100, Zbigniew Luszpinski wrote:
> Hello,
>
> I have ASRock K10N78FullHD-hSLI 3.0 mainboard.
> lm_sensors 3.1.0->sensors-detect returns this:
> Found unknown SMBus adapter 10de:0752 at 0000:00:01.1.
> Sorry, no supported PCI bus adapters found.
>
> lspci finds:
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus
> [10de:0752] (rev a1)
>
> How can I help supporting it?
Please send the output of "lspci -vv -s 00:01.1".
> I think this might be gpu temperature sensor.
Unlikely. The GPU temperature sensor, if you have any, would rather be
on one of the graphics adapter's I2C buses.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I
2009-03-04 13:38 [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I help Zbigniew Luszpinski
2009-03-04 14:21 ` [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I Jean Delvare
@ 2009-03-04 21:13 ` Zbigniew Luszpinski
2009-03-04 21:58 ` Jean Delvare
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Zbigniew Luszpinski @ 2009-03-04 21:13 UTC (permalink / raw)
To: lm-sensors
Wednesday 04 of March 2009 15:21:47 you wrote:
> Please send the output of "lspci -vv -s 00:01.1".
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
Subsystem: ASRock Incorporation K10N78FullHD-hSLI R3.0 SMBus
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSELúst >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 2900 [sized]
Region 4: I/O ports at 2d00 [sized]
Region 5: I/O ports at 2e00 [sized]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
have a nice day,
Zbigniew 'zbiggy' Luszpinski
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I
2009-03-04 13:38 [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I help Zbigniew Luszpinski
2009-03-04 14:21 ` [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I Jean Delvare
2009-03-04 21:13 ` Zbigniew Luszpinski
@ 2009-03-04 21:58 ` Jean Delvare
2009-03-04 23:13 ` Zbigniew Luszpinski
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Jean Delvare @ 2009-03-04 21:58 UTC (permalink / raw)
To: lm-sensors
On Wed, 4 Mar 2009 22:13:35 +0100, Zbigniew Luszpinski wrote:
> Wednesday 04 of March 2009 15:21:47 you wrote:
> > Please send the output of "lspci -vv -s 00:01.1".
>
> 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
> Subsystem: ASRock Incorporation K10N78FullHD-hSLI R3.0 SMBus
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSELúst >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 7
> Region 0: I/O ports at 2900 [sized]
> Region 4: I/O ports at 2d00 [sized]
> Region 5: I/O ports at 2e00 [sized]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
This looks reasonably similar to the other SMBus controllers from
nVidia. Are you willing to take your chance?
If you are, here's what you need to do (as root):
# modprobe i2c-nforce2
# echo "10de 0752" > /sys/bus/pci/drivers/nForce2_smbus/new_id
# modprobe i2c-dev
# i2cdetect -l
# i2cdetect <n>
# i2cdetect <n+1>
where <n> and <n+1> are the i2c bus numbers of the two nForce SMBus
channels.
If this gives resonable results I will add the new device ID to the
sensors-detect script and the i2c-nforce2 driver.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I
2009-03-04 13:38 [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I help Zbigniew Luszpinski
` (2 preceding siblings ...)
2009-03-04 21:58 ` Jean Delvare
@ 2009-03-04 23:13 ` Zbigniew Luszpinski
2009-03-05 9:09 ` Jean Delvare
2009-03-05 14:28 ` Zbigniew Luszpinski
5 siblings, 0 replies; 7+ messages in thread
From: Zbigniew Luszpinski @ 2009-03-04 23:13 UTC (permalink / raw)
To: lm-sensors
Wednesday 04 of March 2009 22:58:46 Jean Delvare napisa³(a):
> If this gives resonable results I will add the new device ID to the
> sensors-detect script and the i2c-nforce2 driver.
I will probe file /dev/i2c-3.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
I will probe file /dev/i2c-4.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
60: -- 61 -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: 70 -- -- -- -- -- -- --
have a nice day,
Zbigniew 'zbiggy' Luszpinski
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I
2009-03-04 13:38 [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I help Zbigniew Luszpinski
` (3 preceding siblings ...)
2009-03-04 23:13 ` Zbigniew Luszpinski
@ 2009-03-05 9:09 ` Jean Delvare
2009-03-05 14:28 ` Zbigniew Luszpinski
5 siblings, 0 replies; 7+ messages in thread
From: Jean Delvare @ 2009-03-05 9:09 UTC (permalink / raw)
To: lm-sensors
On Thu, 5 Mar 2009 00:13:36 +0100, Zbigniew Luszpinski wrote:
> Wednesday 04 of March 2009 22:58:46 Jean Delvare napisał(a):
> > If this gives resonable results I will add the new device ID to the
> > sensors-detect script and the i2c-nforce2 driver.
>
> I will probe file /dev/i2c-3.
> I will probe address range 0x03-0x77.
> Continue? [Y/n]
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: -- -- -- -- -- 08 -- -- -- -- -- -- --
> 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 50: 50 51 -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 70: -- -- -- -- -- -- -- --
>
> I will probe file /dev/i2c-4.
> I will probe address range 0x03-0x77.
> Continue? [Y/n]
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: -- -- -- -- -- 08 -- -- -- -- -- -- --
> 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 50: 50 51 52 53 54 55 56 57 -- -- -- -- -- -- -- --
> 60: -- 61 -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 70: 70 -- -- -- -- -- -- --
This looks good. Can you please verify that:
# i2cdump -y 3 0x50 b
# i2cdump -y 3 0x50 c
# i2cdump -y 3 0x50 W
all return the exact same data?
You can now run sensors-detect again, but I doubt it will find any
hardware monitoring chip on the SMBus.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I
2009-03-04 13:38 [lm-sensors] Found unknown SMBus adapter 10de:0752 - how can I help Zbigniew Luszpinski
` (4 preceding siblings ...)
2009-03-05 9:09 ` Jean Delvare
@ 2009-03-05 14:28 ` Zbigniew Luszpinski
5 siblings, 0 replies; 7+ messages in thread
From: Zbigniew Luszpinski @ 2009-03-05 14:28 UTC (permalink / raw)
To: lm-sensors
Thursday 05 of March 2009 10:09:23 Jean Delvare wrote:
> This looks good. Can you please verify that:
> # i2cdump -y 3 0x50 b
> # i2cdump -y 3 0x50 c
> # i2cdump -y 3 0x50 W
> all return the exact same data?
Yes. All the same.
> You can now run sensors-detect again, but I doubt it will find any
> hardware monitoring chip on the SMBus.
eeprom driver matched. I looked at i2cdump and found names of my RAM modules.
thanks for help,
Zbigniew 'zbiggy' Luszpinski
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 7+ messages in thread