* [GIT PATCH] USB patches for 2.6.31-git
@ 2009-09-23 13:55 Greg KH
2009-09-23 17:24 ` [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM Ingo Molnar
2009-09-23 17:37 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow more than one early console" Ingo Molnar
0 siblings, 2 replies; 20+ messages in thread
From: Greg KH @ 2009-09-23 13:55 UTC (permalink / raw)
To: Linus Torvalds, Andrew Morton; +Cc: linux-kernel, linux-usb
Here is the big USB merge for your 2.6.31-git tree.
Lots of usb stuff all over the map here. For details see the
shortlog below.
Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/
All of these patches have been in the -next and -mm trees for quite
a while.
The full patches will be sent to the linux-usb mailing list, if anyone
wants to see them.
thanks,
greg k-h
------------
Documentation/kernel-parameters.txt | 2 +-
Documentation/usb/authorization.txt | 10 +-
Documentation/usb/usbmon.txt | 8 +-
Documentation/x86/earlyprintk.txt | 39 +-
MAINTAINERS | 4 +-
arch/x86/kernel/early_printk.c | 780 +---------
drivers/net/usb/cdc_eem.c | 17 +-
drivers/usb/Kconfig | 3 +
drivers/usb/Makefile | 2 +
drivers/usb/class/cdc-acm.c | 2 +
drivers/usb/class/cdc-wdm.c | 30 +-
drivers/usb/class/usbtmc.c | 84 +-
drivers/usb/core/config.c | 2 +-
drivers/usb/core/devio.c | 247 +++-
drivers/usb/core/driver.c | 75 +-
drivers/usb/core/generic.c | 4 +-
drivers/usb/core/hcd.c | 113 +-
drivers/usb/core/hcd.h | 5 +
drivers/usb/core/hub.c | 126 ++-
drivers/usb/core/message.c | 32 +-
drivers/usb/core/usb.c | 13 +-
drivers/usb/core/usb.h | 7 +
drivers/usb/early/Makefile | 5 +
drivers/usb/early/ehci-dbgp.c | 996 ++++++++++++
drivers/usb/gadget/Kconfig | 31 +-
drivers/usb/gadget/amd5536udc.c | 56 +-
drivers/usb/gadget/at91_udc.c | 1 -
drivers/usb/gadget/audio.c | 24 +-
drivers/usb/gadget/composite.c | 2 +-
drivers/usb/gadget/dummy_hcd.c | 5 -
drivers/usb/gadget/ether.c | 31 +-
drivers/usb/gadget/f_audio.c | 97 +-
drivers/usb/gadget/f_eem.c | 562 +++++++
drivers/usb/gadget/f_rndis.c | 15 +-
drivers/usb/gadget/fsl_qe_udc.c | 4 +
drivers/usb/gadget/gmidi.c | 8 +-
drivers/usb/gadget/pxa25x_udc.c | 49 +-
drivers/usb/gadget/pxa25x_udc.h | 1 +
drivers/usb/gadget/rndis.c | 13 +-
drivers/usb/gadget/rndis.h | 3 +-
drivers/usb/gadget/s3c-hsotg.c | 6 +-
drivers/usb/gadget/s3c2410_udc.c | 3 +-
drivers/usb/gadget/u_audio.c | 10 +-
drivers/usb/gadget/u_ether.c | 85 +-
drivers/usb/gadget/u_ether.h | 12 +-
drivers/usb/gadget/u_serial.c | 1 -
drivers/usb/host/Kconfig | 18 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-atmel.c | 230 +++
drivers/usb/host/ehci-au1xxx.c | 29 +-
drivers/usb/host/ehci-dbg.c | 46 +-
drivers/usb/host/ehci-hcd.c | 89 +-
drivers/usb/host/ehci-hub.c | 84 +-
drivers/usb/host/ehci-mem.c | 26 +-
drivers/usb/host/ehci-pci.c | 42 +-
drivers/usb/host/ehci-q.c | 95 +-
drivers/usb/host/ehci-sched.c | 100 +-
drivers/usb/host/ehci-w90x900.c | 181 +++
drivers/usb/host/ehci.h | 14 +-
drivers/usb/host/isp1362-hcd.c | 2909 +++++++++++++++++++++++++++++++++++
drivers/usb/host/isp1362.h | 1079 +++++++++++++
drivers/usb/host/isp1760-hcd.c | 4 +
drivers/usb/host/isp1760-hcd.h | 2 +
drivers/usb/host/isp1760-if.c | 21 +-
drivers/usb/host/ohci-at91.c | 2 +-
drivers/usb/host/ohci-au1xxx.c | 27 +-
drivers/usb/host/ohci-ep93xx.c | 1 -
drivers/usb/host/ohci-hcd.c | 1 -
drivers/usb/host/ohci-pxa27x.c | 4 +
drivers/usb/host/oxu210hp-hcd.c | 1 -
drivers/usb/host/pci-quirks.c | 2 +-
drivers/usb/host/sl811-hcd.c | 8 +-
drivers/usb/host/uhci-q.c | 1 -
drivers/usb/host/whci/asl.c | 12 +-
drivers/usb/host/whci/hcd.c | 8 +-
drivers/usb/host/whci/pzl.c | 12 +-
drivers/usb/host/whci/qset.c | 4 +-
drivers/usb/host/whci/whci-hc.h | 1 +
drivers/usb/host/xhci-dbg.c | 5 +-
drivers/usb/host/xhci-hcd.c | 530 ++++++--
drivers/usb/host/xhci-mem.c | 140 ++-
drivers/usb/host/xhci-pci.c | 16 +
drivers/usb/host/xhci-ring.c | 377 ++++-
drivers/usb/host/xhci.h | 111 ++-
drivers/usb/image/microtek.c | 37 -
drivers/usb/misc/idmouse.c | 21 +
drivers/usb/misc/ldusb.c | 6 +
drivers/usb/misc/legousbtower.c | 6 +
drivers/usb/misc/sisusbvga/sisusb.c | 53 +-
drivers/usb/misc/sisusbvga/sisusb.h | 2 -
drivers/usb/misc/usbsevseg.c | 69 +-
drivers/usb/mon/Kconfig | 4 +-
drivers/usb/mon/Makefile | 2 +-
drivers/usb/mon/mon_bin.c | 12 +-
drivers/usb/mon/mon_dma.c | 95 --
drivers/usb/mon/mon_main.c | 1 -
drivers/usb/mon/mon_text.c | 14 -
drivers/usb/mon/usb_mon.h | 14 -
drivers/usb/musb/musb_core.c | 8 +-
drivers/usb/otg/isp1301_omap.c | 23 +-
drivers/usb/serial/ark3116.c | 24 +-
drivers/usb/serial/ch341.c | 52 +
drivers/usb/serial/ftdi_sio.c | 7 +
drivers/usb/serial/ftdi_sio.h | 10 +
drivers/usb/serial/generic.c | 206 ++-
drivers/usb/serial/iuu_phoenix.c | 115 ++-
drivers/usb/serial/moto_modem.c | 2 +-
drivers/usb/serial/option.c | 138 ++-
drivers/usb/serial/pl2303.c | 71 +-
drivers/usb/serial/pl2303.h | 4 +
drivers/usb/serial/sierra.c | 157 ++-
drivers/usb/serial/usb-serial.c | 23 +-
drivers/usb/storage/datafab.c | 4 +-
drivers/usb/storage/initializers.c | 2 +-
drivers/usb/storage/jumpshot.c | 2 +-
drivers/usb/storage/onetouch.c | 2 +-
drivers/usb/storage/unusual_devs.h | 22 +-
drivers/usb/usb-skeleton.c | 252 +++-
include/linux/usb.h | 25 +-
include/linux/usb/audio.h | 287 ++--
include/linux/usb/ch9.h | 8 +
include/linux/usb/ehci_def.h | 35 +
include/linux/usb/isp1362.h | 46 +
include/linux/usb/isp1760.h | 18 +
include/linux/usb/serial.h | 2 +
include/linux/usbdevice_fs.h | 3 +
126 files changed, 9604 insertions(+), 2138 deletions(-)
create mode 100644 drivers/usb/early/Makefile
create mode 100644 drivers/usb/early/ehci-dbgp.c
create mode 100644 drivers/usb/gadget/f_eem.c
create mode 100644 drivers/usb/host/ehci-atmel.c
create mode 100644 drivers/usb/host/ehci-w90x900.c
create mode 100644 drivers/usb/host/isp1362-hcd.c
create mode 100644 drivers/usb/host/isp1362.h
delete mode 100644 drivers/usb/mon/mon_dma.c
create mode 100644 include/linux/usb/isp1362.h
create mode 100644 include/linux/usb/isp1760.h
---------------
Ajay Kumar Gupta (1):
USB: musb: fix put_device() call sequence
Alan Stern (10):
USB: add API for userspace drivers to "claim" ports
USB: make intf.pm_usage an atomic_t
USB: make the "usbfs_snoop" log more pertinent
USB: check for hub driver not bound to root hub device
USB: don't lose mode switch events on suspended devices
USB: dummy-hcd: accept mismatch between wLength and transfer length
USB: s3c2410: unregister should call unbind, not disconnect
USB: EHCI: rescan the queue after an unlink
USB: EHCI: change deschedule logic for interrupt QHs
USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag
Alek Du (3):
USB: EHCI: add need_io_watchdog flag to ehci_hcd
USB: EHCI: split ehci_qh into hw and sw parts
USB: EHCI: Add Intel Moorestown EHCI controller HOSTPCx extensions and support phy low power mode
Anand Gadiyar (2):
USB: EHCI: OHCI: Remove unnecessary includes of reboot.h
USB: OMAP: ISP1301: Compile fix
Anton Vorontsov (1):
USB: fsl_qe_udc: Add fsl,mpc8323-qe-usb compatible entry
Aric Blumer (1):
USB: ohci-pxa27x: Allow NOCP and OCPM to be cleared
Bob Liu (1):
USB: uhci: rm repeatedly evaluation for urbp->qh
Brian Niebuhr (2):
USB: Fix CDC EEM host driver 'sentinel' CRC validation
USB: gadget: Add EEM gadget driver
David VomLehn (1):
USB: use kfifo to buffer usb-generic serial writes
David Vrabel (1):
USB: whci-hcd: make endpoint_reset method async
David Woodhouse (1):
USB: Work around BIOS bugs by quiescing USB controllers earlier
Figo.zhang (1):
USB: ehci-dbg.c: no need for checking it before call vfree
Frank Schaefer (3):
USB-serial: pl2303: fix baud rate handling in case of unsupported values
USB-serial: pl2303: add space/mark parity
USB-serial: pl2303: use 1.5 instead of 2 stop bits with 5 data bits
George Spelvin (1):
USB: Clean up root hub string descriptors
Gergely Imreh (1):
USB: fix USBTMC get_capabilities success handling
Greg Kroah-Hartman (1):
USB: skeleton: fix coding style issues.
Guus Sliepen (1):
USB: usbtmc: sanity checks for DEV_DEP_MSG_IN urbs
H Hartley Sweeten (1):
USB: ohci-ep93xx.c: remove unused variable
Hennerich, Michael (1):
USB: sl811-hcd: Fix device disconnect:
Huzaifa Sidhpurwala (1):
USB: option.c Add support for ZTE AC2726 EVDO modem
Jason Wessel (11):
USB: ehci,dbgp,early_printk: split ehci debug driver from early_printk.c
USB: dbgp: insert cr prior to nl as needed
USB: ehci-dbgp: Execute early BIOS hand off
USB: dbgp: EHCI debug controller initialization delays
early_printk: Allow more than one early console
USB: ehci-dbgp: stability improvements and external re-init
USB: ehci-dbgp,ehci: Allow early or late use of the dbgp device
USB: ehci-dbgp: errata for EHCI debug controller initialization
USB: ehci-dbgp: errata for EHCI debug/host controller synchronization
USB: ehci-dbgp,documentation: Documentation updates for ehci-dbgp
USB: ehci-dbgp,ehci: Allow dbpg to work with suspend/resume
Jean Delvare (1):
USB: Fix sysfs paths in documentation
Jiri Slaby (2):
USB: usb-serial, remove unused variables
USB: make usb_buffer_map_sg consistent with doc
Jon Hunter (1):
USB: EHCI: ensure all watchdog timer events are deleted when suspending usb
Julia Lawall (3):
USB: gadget: Drop NULL test on list_entry result
USB: storage: Drop an unneeded a NULL test
USB: isp1362: Correct use of ! and &
Ken MacLeod (1):
USB: isp1362: fix pulldown register defines and conf logic
Laurent Pinchart (4):
USB: Move endpoint sync type definitions from usb/audio.h to usb/ch9.h
USB: Move vendor subclass definition from usb/audio.h to usb/ch9.h
USB audio gadget: Prefix all macro definitions with UAC_ in linux/usb/audio.h
USB audio gadget: Un-inline generic_[gs]et_cmd
Li Yang (1):
USB: gadget: Update Freescale UDC entry in MAINTAINERS
Lothar Wassmann (1):
USB: NXP ISP1362 USB host driver
Manuel Lauss (2):
USB: option: TELIT UC864G support
USB: au1xxx: add dev_pm_ops
Markus Rechberger (1):
USB: increase usbdevfs max isoc buffer size
Maxin John (1):
USB: serial: Spelling correction in Motorola USB Phone driver
Michael Hennerich (2):
USB: serial: ftdi: handle gnICE+ JTAG adaptors
USB: isp1760: allow platform devices to customize devflags
Michael S. Tsirkin (1):
USB: audio: guard kernel-only code with __KERNEL__
Ming Lei (1):
USB: otg: twl4030-usb.c: mark .init as subsys_initcall_sync
Nicolas Ferre (3):
USB: at91: Add USB EHCI driver for at91sam9g45 series
USB: at91: Add USB gadget driver selection for at91sam9g45 series
USB: at91: modify OHCI driver to allow shared interrupts
Oliver Neukum (17):
USB: storage: fix a resume path GFP_NOIO must be used
USB: CDC WDM driver doesn't support non-blocking reads
USB: fix cdc-acm regression in open
USB: serial: full autosuspend support for the option driver
USB: usbtmc can do IO to device after disconnect
USB: suspend/resume support for usbtmc
USB: legousbtower: make poll notice disconnect
USB: ldusb should signal an error in poll if the device is disconnected
USB: full power management support for the idmouse driver
USB: full autosuspend and power management support for usbsevseg
USB: fix wrong order of events in usb serial suspension
USB: remove unneeded printks from microtek driver
USB: support for autosuspend in sierra while online
USB: fix missing error check in probing
USB: skel_read really sucks royally
USB: make usb-skeleton honor O_NONBLOCK in write path
USB: O_NONBLOCK in read path of skeleton
Olivier Bornet (5):
USB: iuu_phoenix: Don't reset the device at close
USB: iuu_phoenix: clean-up parameter's descriptions
USB: iuu_phoenix: add support for changing VCC
USB: iuu_phoenix: increment version number
USB: iuu_phoenix: add a way to select the default VCC
Ondrej Zary (1):
USB: ark3116: add IrDA support for Gembird UIR-22
Pawel Ludwikow (2):
USB: serial: ftdi_sio: new hardware support - hameg power supply
USB: serial: pl2303: new hardware support - sanwa multimeter
Pete Zaitcev (6):
USB: sisusbvga: drop usb_buffer_alloc
USB: usbmon: drop Kconfig defaults
USB: usbmon: touch up the documentation
USB: usbmon: end ugly tricks with DMA peeking
USB: Let usb_sg_init to set transfer_buffer more often
USB: unusual_devs.h: drop some unneeded floppy entries
Philipp Zabel (1):
USB: gadget: pxa25x: basic transceiver support
Randy Dunlap (3):
USB: usbtmc: fix printk format warnings
USB: otg: fix twl4030-usb build
USB: gadget: ether needs to select CRC32
Robin Callender (1):
USB: gadget: audio driver seg-fault fix
Roel Kluin (4):
USB: gadget: s3c-hsotg: missing parentheses
USB: gadget: Read buffer overflow
USB: double put_tty_driver(gs_tty_driver) in gserial_setup()
USB: gadget: double free_irq() in at91udc_probe()
Rogério Brito (1):
USB: fix paths in usbmon documentation
Sarah Sharp (23):
USB: xhci: Work around for chain bit in link TRBs.
USB: xhci: Fix slot and endpoint context debugging.
USB: xhci: Configure endpoint code refactoring.
USB: xhci: Set correct max packet size for HS/FS control endpoints.
USB: xhci: Support full speed devices.
USB: xhci: Handle stalled control endpoints.
USB: xhci: Add quirk for Fresco Logic xHCI hardware.
USB: xhci: Make TRB completion code comparison readable.
USB: xhci: Handle babbling endpoints correctly.
USB: xhci: Don't touch xhci_td after it's freed.
USB: xhci: Check URB's actual transfer buffer size.
USB: xhci: Check URB_SHORT_NOT_OK before setting short packet status.
USB: xhci: Set -EREMOTEIO when xHC gives bad transfer length.
USB: xhci: Support interrupt transfers.
USB: Fix SS endpoint companion descriptor parsing.
USB: xhci: Endpoint representation refactoring.
USB: xhci: Refactor input device context setup.
USB: xhci: Change how xHCI commands are handled.
USB: xhci: Fix command wait list handling.
USB: xhci: Set route string for all devices.
USB: xhci: Set multi-TT field for LS/FS devices under hubs.
USB: xhci: Support USB hubs.
USB: Add hub descriptor update hook for xHCI
Steve Holland (3):
USB: usbtmc: Fix short reads in usbtmc_read()
USB: usbtmc: inhibit corruption
USB: usbtmc: correct termination condition for reads.
Tim Small (1):
USb: Break support for WinChipHead CH341 340 USB->Serial "chip"
Wan ZongShun (1):
USB: Add nuvoton Ehci driver for w90p910 platform
fangxiaozhi (1):
USB: usb-storage fails to attach to Huawei Datacard cdrom device
mail@rainerkeller.de (1):
USB: add PIDs for FTDI based OpenDCC hardware
^ permalink raw reply [flat|nested] 20+ messages in thread
* [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM
2009-09-23 13:55 [GIT PATCH] USB patches for 2.6.31-git Greg KH
@ 2009-09-23 17:24 ` Ingo Molnar
2009-09-23 17:32 ` Randy Dunlap
2009-09-23 17:34 ` Greg KH
2009-09-23 17:37 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow more than one early console" Ingo Molnar
1 sibling, 2 replies; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 17:24 UTC (permalink / raw)
To: Greg KH, Oliver Neukum, Elina Pasheva
Cc: Linus Torvalds, Andrew Morton, linux-kernel, linux-usb
> USB: support for autosuspend in sierra while online
FYI, -tip testing found a build failure with the sierra driver on
!CONFIG_PM - fixed via the patch below.
Thanks,
Ingo
-------------------->
>From 26f8ed899041199caa9315e057a28d10f81b5b88 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 23 Sep 2009 19:19:47 +0200
Subject: [PATCH] USB sierra: Fix build if !CONFIG_PM
This build failure:
drivers/usb/serial/sierra.c: In function 'sierra_suspend':
drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm'
Triggers because the ->auto_pm functionality depends on CONFIG_PM.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
drivers/usb/serial/sierra.c | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 68fa0e4..b089a70 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -912,6 +912,8 @@ static void sierra_release(struct usb_serial *serial)
}
}
+#ifdef CONFIG_PM
+
static void stop_read_write_urbs(struct usb_serial *serial)
{
int i, j;
@@ -989,6 +991,8 @@ static int sierra_resume(struct usb_serial *serial)
return ec ? -EIO : 0;
}
+#endif /* CONFIG_PM */
+
static struct usb_serial_driver sierra_device = {
.driver = {
.owner = THIS_MODULE,
@@ -1009,8 +1013,10 @@ static struct usb_serial_driver sierra_device = {
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
.release = sierra_release,
+#ifdef CONFIG_PM
.suspend = sierra_suspend,
.resume = sierra_resume,
+#endif
.read_int_callback = sierra_instat_callback,
};
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM
2009-09-23 17:24 ` [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM Ingo Molnar
@ 2009-09-23 17:32 ` Randy Dunlap
2009-09-23 17:39 ` Ingo Molnar
2009-09-23 17:34 ` Greg KH
1 sibling, 1 reply; 20+ messages in thread
From: Randy Dunlap @ 2009-09-23 17:32 UTC (permalink / raw)
To: Ingo Molnar
Cc: Greg KH, Oliver Neukum, Elina Pasheva, Linus Torvalds,
Andrew Morton, linux-kernel, linux-usb
Ingo Molnar wrote:
>> USB: support for autosuspend in sierra while online
>
> FYI, -tip testing found a build failure with the sierra driver on
> !CONFIG_PM - fixed via the patch below.
>
> Thanks,
>
> Ingo
>
> -------------------->
> From 26f8ed899041199caa9315e057a28d10f81b5b88 Mon Sep 17 00:00:00 2001
> From: Ingo Molnar <mingo@elte.hu>
> Date: Wed, 23 Sep 2009 19:19:47 +0200
> Subject: [PATCH] USB sierra: Fix build if !CONFIG_PM
>
> This build failure:
>
> drivers/usb/serial/sierra.c: In function 'sierra_suspend':
> drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm'
>
> Triggers because the ->auto_pm functionality depends on CONFIG_PM.
>
> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ack.
http://marc.info/?l=linux-usb&m=125305135600816&w=2
lossy. :(
> ---
> drivers/usb/serial/sierra.c | 6 ++++++
> 1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
> index 68fa0e4..b089a70 100644
> --- a/drivers/usb/serial/sierra.c
> +++ b/drivers/usb/serial/sierra.c
> @@ -912,6 +912,8 @@ static void sierra_release(struct usb_serial *serial)
> }
> }
>
> +#ifdef CONFIG_PM
> +
> static void stop_read_write_urbs(struct usb_serial *serial)
> {
> int i, j;
> @@ -989,6 +991,8 @@ static int sierra_resume(struct usb_serial *serial)
> return ec ? -EIO : 0;
> }
>
> +#endif /* CONFIG_PM */
> +
> static struct usb_serial_driver sierra_device = {
> .driver = {
> .owner = THIS_MODULE,
> @@ -1009,8 +1013,10 @@ static struct usb_serial_driver sierra_device = {
> .tiocmset = sierra_tiocmset,
> .attach = sierra_startup,
> .release = sierra_release,
> +#ifdef CONFIG_PM
> .suspend = sierra_suspend,
> .resume = sierra_resume,
> +#endif
> .read_int_callback = sierra_instat_callback,
> };
>
> --
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM
2009-09-23 17:24 ` [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM Ingo Molnar
2009-09-23 17:32 ` Randy Dunlap
@ 2009-09-23 17:34 ` Greg KH
1 sibling, 0 replies; 20+ messages in thread
From: Greg KH @ 2009-09-23 17:34 UTC (permalink / raw)
To: Ingo Molnar
Cc: Oliver Neukum, Elina Pasheva, Linus Torvalds, Andrew Morton,
linux-kernel, linux-usb
On Wed, Sep 23, 2009 at 07:24:56PM +0200, Ingo Molnar wrote:
>
> > USB: support for autosuspend in sierra while online
>
> FYI, -tip testing found a build failure with the sierra driver on
> !CONFIG_PM - fixed via the patch below.
>
Thanks, I'll queue this up when I get back from the Plumbers conference
this week.
greg k-h
^ permalink raw reply [flat|nested] 20+ messages in thread
* [origin tree boot hang] [PATCH] Revert "early_printk: Allow more than one early console"
2009-09-23 13:55 [GIT PATCH] USB patches for 2.6.31-git Greg KH
2009-09-23 17:24 ` [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM Ingo Molnar
@ 2009-09-23 17:37 ` Ingo Molnar
2009-09-23 17:57 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan " Jason Wessel
1 sibling, 1 reply; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 17:37 UTC (permalink / raw)
To: Greg KH, Jason Wessel
Cc: Linus Torvalds, Andrew Morton, linux-kernel, linux-usb
> early_printk: Allow more than one early console
this patch broke things pretty badly on x86, with pretty much any
config, as long as the early console is used - which most of my
test-systems do :-(
I'm getting an early boot hard lockup, which is due to an infinite
stream of:
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] console [earlyser0] enabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpuset
[ ... ]
i've reverted it via the patch below, as it clearly has unintended side
effects.
Ingo
>From 1070163596c13d3c34809c747c7800b3b06b158e Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Wed, 23 Sep 2009 19:31:04 +0200
Subject: [PATCH] Revert "early_printk: Allow more than one early console"
This reverts commit c9530948bc626c8b638015c0b32abb9615659ec6.
---
arch/x86/kernel/early_printk.c | 65 +++++++++++++++++++--------------------
1 files changed, 32 insertions(+), 33 deletions(-)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..519a5e1 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -176,19 +176,10 @@ asmlinkage void early_printk(const char *fmt, ...)
va_end(ap);
}
-static inline void early_console_register(struct console *con, int keep_early)
-{
- early_console = con;
- if (keep_early)
- early_console->flags &= ~CON_BOOT;
- else
- early_console->flags |= CON_BOOT;
- register_console(early_console);
-}
static int __init setup_early_printk(char *buf)
{
- int keep;
+ int keep_early;
if (!buf)
return 0;
@@ -197,34 +188,42 @@ static int __init setup_early_printk(char *buf)
return 0;
early_console_initialized = 1;
- keep = (strstr(buf, "keep") != NULL);
-
- while (*buf != '\0') {
- if (!strncmp(buf, "serial", 6)) {
- early_serial_init(buf + 6);
- early_console_register(&early_serial_console, keep);
- }
- if (!strncmp(buf, "ttyS", 4)) {
- early_serial_init(buf + 4);
- early_console_register(&early_serial_console, keep);
- }
- if (!strncmp(buf, "vga", 3) &&
- boot_params.screen_info.orig_video_isVGA == 1) {
- max_xpos = boot_params.screen_info.orig_video_cols;
- max_ypos = boot_params.screen_info.orig_video_lines;
- current_ypos = boot_params.screen_info.orig_y;
- early_console_register(&early_vga_console, keep);
- }
+ keep_early = (strstr(buf, "keep") != NULL);
+
+ if (!strncmp(buf, "serial", 6)) {
+ early_serial_init(buf + 6);
+ early_console = &early_serial_console;
+ } else if (!strncmp(buf, "ttyS", 4)) {
+ early_serial_init(buf);
+ early_console = &early_serial_console;
+ } else if (!strncmp(buf, "vga", 3)
+ && boot_params.screen_info.orig_video_isVGA == 1) {
+ max_xpos = boot_params.screen_info.orig_video_cols;
+ max_ypos = boot_params.screen_info.orig_video_lines;
+ current_ypos = boot_params.screen_info.orig_y;
+ early_console = &early_vga_console;
#ifdef CONFIG_EARLY_PRINTK_DBGP
- if (!strncmp(buf, "dbgp", 4) && !early_dbgp_init(buf + 4))
- early_console_register(&early_dbgp_console, keep);
+ } else if (!strncmp(buf, "dbgp", 4)) {
+ if (early_dbgp_init(buf+4) < 0)
+ return 0;
+ early_console = &early_dbgp_console;
+ /*
+ * usb subsys will reset ehci controller, so don't keep
+ * that early console
+ */
+ keep_early = 0;
#endif
#ifdef CONFIG_HVC_XEN
- if (!strncmp(buf, "xen", 3))
- early_console_register(&xenboot_console, keep);
+ } else if (!strncmp(buf, "xen", 3)) {
+ early_console = &xenboot_console;
#endif
- buf++;
}
+
+ if (keep_early)
+ early_console->flags &= ~CON_BOOT;
+ else
+ early_console->flags |= CON_BOOT;
+ register_console(early_console);
return 0;
}
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM
2009-09-23 17:32 ` Randy Dunlap
@ 2009-09-23 17:39 ` Ingo Molnar
0 siblings, 0 replies; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 17:39 UTC (permalink / raw)
To: Randy Dunlap
Cc: Greg KH, Oliver Neukum, Elina Pasheva, Linus Torvalds,
Andrew Morton, linux-kernel, linux-usb
* Randy Dunlap <randy.dunlap@oracle.com> wrote:
> Ingo Molnar wrote:
> >> USB: support for autosuspend in sierra while online
> >
> > FYI, -tip testing found a build failure with the sierra driver on
> > !CONFIG_PM - fixed via the patch below.
> >
> > Thanks,
> >
> > Ingo
> >
> > -------------------->
> > From 26f8ed899041199caa9315e057a28d10f81b5b88 Mon Sep 17 00:00:00 2001
> > From: Ingo Molnar <mingo@elte.hu>
> > Date: Wed, 23 Sep 2009 19:19:47 +0200
> > Subject: [PATCH] USB sierra: Fix build if !CONFIG_PM
> >
> > This build failure:
> >
> > drivers/usb/serial/sierra.c: In function 'sierra_suspend':
> > drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm'
> >
> > Triggers because the ->auto_pm functionality depends on CONFIG_PM.
> >
> > Signed-off-by: Ingo Molnar <mingo@elte.hu>
>
> Ack.
> http://marc.info/?l=linux-usb&m=125305135600816&w=2
>
> lossy. :(
yeah, indeed.
Btw., i think my patch is a bit better as it also includes
stop_read_write_urbs() in the #ifdef block - your patch would probably
trigger a 'defined but not used' compiler warning. (have not checked
though.)
Ingo
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan one early console"
2009-09-23 17:37 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow more than one early console" Ingo Molnar
@ 2009-09-23 17:57 ` Jason Wessel
2009-09-23 19:02 ` Ingo Molnar
0 siblings, 1 reply; 20+ messages in thread
From: Jason Wessel @ 2009-09-23 17:57 UTC (permalink / raw)
To: Ingo Molnar
Cc: Greg KH, Linus Torvalds, Andrew Morton, linux-kernel, linux-usb
Ingo Molnar wrote:
>> early_printk: Allow more than one early console
>>
>
> this patch broke things pretty badly on x86, with pretty much any
> config, as long as the early console is used - which most of my
> test-systems do :-(
>
Ingo,
Can you send me the boot args and kernel config you are using? I'd like
to figure out which part was at fault and fix it up.
Thanks,
Jason.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan one early console"
2009-09-23 17:57 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan " Jason Wessel
@ 2009-09-23 19:02 ` Ingo Molnar
2009-09-23 19:17 ` Ingo Molnar
0 siblings, 1 reply; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 19:02 UTC (permalink / raw)
To: Jason Wessel, Len Brown
Cc: Greg KH, Linus Torvalds, Andrew Morton, linux-kernel, linux-usb
* Jason Wessel <jason.wessel@windriver.com> wrote:
> Ingo Molnar wrote:
> >> early_printk: Allow more than one early console
> >>
> >
> > this patch broke things pretty badly on x86, with pretty much any
> > config, as long as the early console is used - which most of my
> > test-systems do :-(
> >
>
> Ingo,
>
> Can you send me the boot args and kernel config you are using? I'd
> like to figure out which part was at fault and fix it up.
will do. Will take some time though - trying to track down a new boot
crash as well:
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x83 returned -19 after 16410 usecs
calling ibm_acpiphp_init+0x0/0x190 @ 1
BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
IP: [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
PGD 0
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
last sysfs file:
CPU 0
Pid: 1, comm: swapper Not tainted 2.6.31-tip #16786 System Product Name
RIP: 0010:[<ffffffff82b07130>] [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
RSP: 0018:ffff88003f2d1d60 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88003f2d1d68 RSI: 00000000000001e4 RDI: 0000000000000000
RBP: ffff88003f2d1d90 R08: 0000000000000001 R09: ffffffff824b645b
R10: 000000002d0ef63b R11: ffff88003f2d1a80 R12: ffff88003fa780d0
R13: ffffffff83940dc8 R14: 0000000000000001 R15: ffffffff83942e10
FS: 0000000000000000(0000) GS:ffff880005800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000003 CR3: 0000000001001000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88003f2d0000, task ffff88003f2c8000)
Stack:
ffff88003f2c8000 ffff88003cfbb690 000000002d0ef63b 0000000000000000
<0> 0000000000000000 ffff88003fa780d0 ffff88003f2d1e10 ffffffff8156b6b6
<0> 0000000000000001 0000000100000000 0000000000000000 ffffffff83940dc8
Call Trace:
[<ffffffff8156b6b6>] acpi_ns_walk_namespace+0x11d/0x234
[<ffffffff82b070d4>] ? ibm_find_acpi_device+0x0/0xf5
[<ffffffff8157b159>] ? acpi_ut_acquire_mutex+0xd9/0x12e
[<ffffffff82b070d4>] ? ibm_find_acpi_device+0x0/0xf5
[<ffffffff81566dfa>] acpi_walk_namespace+0x105/0x162
[<ffffffff81d067bf>] ? acpi_pm_read+0xd/0x3e
[<ffffffff82b06f44>] ? ibm_acpiphp_init+0x0/0x190
[<ffffffff82b06fa8>] ibm_acpiphp_init+0x64/0x190
[<ffffffff810090b4>] do_one_initcall+0x82/0x1a6
[<ffffffff810edecc>] ? init_irq_proc+0x77/0x9a
[<ffffffff82ad8975>] do_basic_setup+0x5e/0x87
[<ffffffff82ad8a26>] kernel_init+0x88/0xe2
[<ffffffff8103ddfa>] child_rip+0xa/0x20
[<ffffffff8103d7bc>] ? restore_args+0x0/0x30
[<ffffffff82ad899e>] ? kernel_init+0x0/0xe2
[<ffffffff8103ddf0>] ? child_rip+0x0/0x20
Code: 48 c7 c2 c0 7b 0b 82 48 c7 c6 95 39 4a 82 48 c7 c7 1a 3c 4a 82 31 c0 e8 02 84 4b ff 31 c0 e9 82 00 00 00 48 8b 45 d8 48 8b 40 30 <c6> 40 03 00 48 8b 45 d8 83 78 18 00 74 5f f6 40 0d 04 74 59 48
RIP [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
RSP <ffff88003f2d1d60>
CR2: 0000000000000003
---[ end trace 5a5d197966b56a2e ]---
Kernel panic - not syncing: Fatal exception
Pid: 1, comm: swapper Tainted: G D 2.6.31-tip #16786
/me looks in the general direction of Len ;-)
Ingo
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan one early console"
2009-09-23 19:02 ` Ingo Molnar
@ 2009-09-23 19:17 ` Ingo Molnar
2009-09-23 21:05 ` Ingo Molnar
0 siblings, 1 reply; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 19:17 UTC (permalink / raw)
To: Jason Wessel, Len Brown
Cc: Greg KH, Linus Torvalds, Andrew Morton, linux-kernel, linux-usb
[-- Attachment #1: Type: text/plain, Size: 910 bytes --]
* Ingo Molnar <mingo@elte.hu> wrote:
> > Can you send me the boot args and kernel config you are using? I'd
> > like to figure out which part was at fault and fix it up.
>
> will do. Will take some time though - trying to track down a new boot
> crash as well:
>
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> initcall acpiphp_init+0x0/0x83 returned -19 after 16410 usecs
> calling ibm_acpiphp_init+0x0/0x190 @ 1
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
> IP: [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
You are lucky - while trying to bisect this crash i again ran into the
early boot hard hang.
[ I am less lucky, trying to bisect all this stuff ;-) ]
The commit point to which the attached config and bootlog belongs is:
2.6.31-07863-gb64ada6
Reverting:
c953094: early_printk: Allow more than one early console
solves it.
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 73527 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31
# Wed Sep 23 21:08:03 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
# CONFIG_CGROUP_NS is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_EVENT_PROFILE is not set
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_X86_X2APIC is not set
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_MAXSMP=y
CONFIG_NR_CPUS=4096
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
# CONFIG_X86_CPUID is not set
CONFIG_X86_CPU_DEBUG=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=9
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MTRR is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_SYSFS_POWER is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_DEBUG_FUNC_TRACE=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
# CONFIG_DMAR_DEFAULT_ON is not set
CONFIG_DMAR_BROKEN_GFX_WA=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
# CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_STP=y
CONFIG_GARP=y
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=y
# CONFIG_IPX is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
# CONFIG_IPDDP_ENCAP is not set
CONFIG_IPDDP_DECAP=y
CONFIG_X25=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
# CONFIG_NET_EMATCH_META is not set
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=y
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEV=y
# CONFIG_CAN_CALC_BITTIMING is not set
# CONFIG_CAN_SJA1000 is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_TKIP_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_VERBOSE_PS_DEBUG=y
CONFIG_MAC80211_VERBOSE_MPL_DEBUG=y
# CONFIG_MAC80211_DRIVER_API_TRACER is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
CONFIG_DEBUG_DRIVER=y
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_PARPORT=y
# CONFIG_PARPORT_PC is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_OSD is not set
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
CONFIG_ICS932S401=y
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_HP_ILO is not set
CONFIG_DELL_LAPTOP=y
CONFIG_ISL29003=y
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
CONFIG_CB710_DEBUG=y
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
# CONFIG_SCSI_ENCLOSURE is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
CONFIG_SCSI_SRP_ATTRS=y
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
CONFIG_SCSI_CXGB3_ISCSI=y
# CONFIG_SCSI_BNX2_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=y
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
# CONFIG_FCOE_FNIC is not set
CONFIG_SCSI_DMX3191D=y
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
CONFIG_SCSI_INIA100=y
CONFIG_SCSI_STEX=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_MMIO is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=y
CONFIG_SCSI_DC390T=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_ACPI is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INIC162X=y
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATP867X=y
CONFIG_PATA_ATIIXP=y
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT821X=y
CONFIG_PATA_IT8213=y
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_TRIFLEX=y
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87410=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_OPTIDMA=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=y
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_AUTODETECT is not set
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
CONFIG_MD_RAID6_PQ=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_LOG_USERSPACE=y
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
CONFIG_DM_DELAY=y
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
# CONFIG_FIREWIRE_SBP2 is not set
# CONFIG_FIREWIRE_NET is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=y
# CONFIG_DUMMY is not set
CONFIG_BONDING=y
CONFIG_MACVLAN=y
CONFIG_EQUALIZER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
# CONFIG_ARCNET_1051 is not set
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=y
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
CONFIG_CASSINI=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
CONFIG_ETHOC=y
CONFIG_DNET=y
# CONFIG_NET_TULIP is not set
CONFIG_HP100=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
CONFIG_ADAPTEC_STARFIRE=y
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=y
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=y
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
CONFIG_8139CP=y
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
CONFIG_EPIC100=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
CONFIG_TLAN=y
CONFIG_KS8842=y
CONFIG_KS8851=y
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_SC92031=y
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
CONFIG_DE600=y
# CONFIG_DE620 is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
CONFIG_NS83820=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
CONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_QLA3XXX=y
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_ATL1C=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_ENIC=y
CONFIG_IXGBE=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBE_DCB=y
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLGE=y
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
CONFIG_WLAN=y
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=y
# CONFIG_WLAN_80211 is not set
#
# WiMAX Wireless Broadband devices
#
# CONFIG_WIMAX_I2400M_USB is not set
# CONFIG_WIMAX_I2400M_SDIO is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_HSO=y
CONFIG_USB_CDC_PHONET=y
# CONFIG_WAN is not set
# CONFIG_ATM_DRIVERS is not set
# CONFIG_IEEE802154_DRIVERS is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=y
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_MISDN is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_PHONE=y
# CONFIG_PHONE_IXJ is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_LM8323=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TWL4030=y
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
CONFIG_JOYSTICK_GF2K=y
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
CONFIG_JOYSTICK_IFORCE=y
# CONFIG_JOYSTICK_IFORCE_USB is not set
CONFIG_JOYSTICK_IFORCE_232=y
# CONFIG_JOYSTICK_WARRIOR is not set
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
# CONFIG_JOYSTICK_SPACEBALL is not set
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_JOYSTICK_WALKERA0701 is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_EETI=y
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
CONFIG_TOUCHSCREEN_WACOM_W8001=y
CONFIG_TOUCHSCREEN_MTOUCH=y
CONFIG_TOUCHSCREEN_INEXIO=y
CONFIG_TOUCHSCREEN_MK712=y
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_ATLAS_BTNS=y
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_TWL4030_PWRBUTTON=y
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
CONFIG_INPUT_WM831X_ON=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
# CONFIG_SERIAL_8250_PNP is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_MWAVE=y
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_NFORCE2_S4985 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_OCORES=y
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=y
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_LM70_LLP is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
# CONFIG_W1_MASTER_DS2490 is not set
CONFIG_W1_MASTER_DS2482=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
CONFIG_BATTERY_DS2760=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_MAX17040=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=y
CONFIG_SENSORS_ADM1026=y
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_ADT7475=y
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=y
CONFIG_SENSORS_FSCPOS=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=y
CONFIG_SENSORS_LM87=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX6650=y
CONFIG_SENSORS_PC87360=y
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_ADS7828=y
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
CONFIG_SENSORS_VT8231=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_HDAPS=y
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_HTC_PASIC3=y
CONFIG_TWL4030_CORE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
CONFIG_MFD_MC13783=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
# CONFIG_EZX_PCAP is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_TWL4030 is not set
CONFIG_REGULATOR_WM831X=y
CONFIG_REGULATOR_WM8400=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_MC13783=y
# CONFIG_REGULATOR_AB3100 is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
CONFIG_MEDIA_TUNER_MT2131=y
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MXL5005S=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DVB=y
CONFIG_VIDEO_BTCX=y
CONFIG_VIDEO_IR=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_TUNER=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_M52790=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
CONFIG_VIDEO_SAA6588=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_VPX3220=y
CONFIG_VIDEO_CX25840=y
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_SAA7127=y
CONFIG_VIDEO_ADV7175=y
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
CONFIG_VIDEO_VIVI=y
CONFIG_VIDEO_BT848=y
CONFIG_VIDEO_BT848_DVB=y
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
CONFIG_VIDEO_CPIA=y
CONFIG_VIDEO_CPIA_PP=y
CONFIG_VIDEO_CPIA_USB=y
CONFIG_VIDEO_CPIA2=y
CONFIG_VIDEO_SAA5246A=y
CONFIG_VIDEO_SAA5249=y
CONFIG_VIDEO_STRADIS=y
CONFIG_VIDEO_ZORAN=y
CONFIG_VIDEO_ZORAN_DC30=y
# CONFIG_VIDEO_ZORAN_ZR36060 is not set
CONFIG_VIDEO_MEYE=y
CONFIG_VIDEO_SAA7134=y
CONFIG_VIDEO_SAA7134_ALSA=y
# CONFIG_VIDEO_SAA7134_DVB is not set
# CONFIG_VIDEO_MXB is not set
CONFIG_VIDEO_HEXIUM_ORION=y
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
CONFIG_VIDEO_CX23885=y
# CONFIG_VIDEO_AU0828 is not set
CONFIG_VIDEO_IVTV=y
CONFIG_VIDEO_FB_IVTV=y
CONFIG_VIDEO_CX18=y
# CONFIG_VIDEO_SAA7164 is not set
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9M111=y
CONFIG_SOC_CAMERA_MT9T031=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
CONFIG_SOC_CAMERA_TW9910=y
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
CONFIG_VIDEO_PVRUSB2=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
CONFIG_VIDEO_PVRUSB2_DEBUGIFC=y
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=y
# CONFIG_VIDEO_EM28XX_ALSA is not set
CONFIG_VIDEO_EM28XX_DVB=y
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=y
CONFIG_USB_VICAM=y
CONFIG_USB_IBMCAM=y
# CONFIG_USB_KONICAWC is not set
CONFIG_USB_QUICKCAM_MESSENGER=y
CONFIG_USB_ET61X251=y
CONFIG_VIDEO_OVCAMCHIP=y
CONFIG_USB_W9968CF=y
CONFIG_USB_OV511=y
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
CONFIG_USB_ZC0301=y
CONFIG_USB_PWC=y
CONFIG_USB_PWC_DEBUG=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_USB_ZR364XX=y
CONFIG_USB_STKWEBCAM=y
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=y
CONFIG_RADIO_MAXIRADIO=y
CONFIG_RADIO_MAESTRO=y
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
CONFIG_RADIO_SI470X=y
# CONFIG_USB_SI470X is not set
# CONFIG_I2C_SI470X is not set
# CONFIG_USB_MR800 is not set
CONFIG_RADIO_TEA5764=y
CONFIG_RADIO_TEA5764_XTAL=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=y
CONFIG_DVB_AV7110=y
# CONFIG_DVB_AV7110_OSD is not set
CONFIG_DVB_BUDGET_CORE=y
CONFIG_DVB_BUDGET=y
CONFIG_DVB_BUDGET_CI=y
# CONFIG_DVB_BUDGET_AV is not set
# CONFIG_DVB_BUDGET_PATCH is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=y
CONFIG_DVB_USB_DEBUG=y
CONFIG_DVB_USB_A800=y
CONFIG_DVB_USB_DIBUSB_MB=y
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=y
# CONFIG_DVB_USB_DIB0700 is not set
CONFIG_DVB_USB_UMT_010=y
CONFIG_DVB_USB_CXUSB=y
CONFIG_DVB_USB_M920X=y
CONFIG_DVB_USB_GL861=y
CONFIG_DVB_USB_AU6610=y
CONFIG_DVB_USB_DIGITV=y
CONFIG_DVB_USB_VP7045=y
CONFIG_DVB_USB_VP702X=y
CONFIG_DVB_USB_GP8PSK=y
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
# CONFIG_DVB_USB_TTUSB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
CONFIG_DVB_USB_OPERA1=y
# CONFIG_DVB_USB_AF9005 is not set
CONFIG_DVB_USB_DW2102=y
# CONFIG_DVB_USB_CINERGY_T2 is not set
CONFIG_DVB_USB_ANYSEE=y
# CONFIG_DVB_USB_DTV5100 is not set
CONFIG_DVB_USB_AF9015=y
# CONFIG_DVB_USB_CE6230 is not set
# CONFIG_DVB_USB_FRIIO is not set
CONFIG_DVB_TTUSB_BUDGET=y
CONFIG_DVB_TTUSB_DEC=y
# CONFIG_SMS_SIANO_MDTV is not set
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
# CONFIG_DVB_B2C2_FLEXCOP_USB is not set
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=y
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=y
#
# Supported SDMC DM1105 Adapters
#
CONFIG_DVB_DM1105=y
#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set
#
# Supported DVB Frontends
#
CONFIG_DVB_FE_CUSTOMISE=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
CONFIG_DVB_STB6100=y
CONFIG_DVB_STV090x=y
CONFIG_DVB_STV6110x=y
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
CONFIG_DVB_ZL10036=y
# CONFIG_DVB_ZL10039 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
CONFIG_DVB_STB6000=y
# CONFIG_DVB_STV0299 is not set
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
CONFIG_DVB_TDA8083=y
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8261=y
CONFIG_DVB_VES1X93=y
# CONFIG_DVB_TUNER_ITD1000 is not set
CONFIG_DVB_TUNER_CX24113=y
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
CONFIG_DVB_SI21XX=y
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=y
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
CONFIG_DVB_DRX397XD=y
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=y
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=y
CONFIG_DVB_ZL10353=y
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
# CONFIG_DVB_DIB7000M is not set
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_AF9013=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
CONFIG_DVB_STV0297=y
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=y
# CONFIG_DVB_OR51211 is not set
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_LGDT3305 is not set
CONFIG_DVB_S5H1409=y
# CONFIG_DVB_AU8522 is not set
CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
# CONFIG_DVB_DIB8000 is not set
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
# CONFIG_DVB_TUNER_DIB0070 is not set
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
# CONFIG_DVB_LGS8GL5 is not set
CONFIG_DVB_LGS8GXX=y
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
CONFIG_VGASTATE=y
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
# CONFIG_FB_BIG_ENDIAN is not set
CONFIG_FB_LITTLE_ENDIAN=y
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
# CONFIG_FB_VGA16 is not set
CONFIG_FB_UVESA=y
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
# CONFIG_FB_CARILLO_RANCH is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=y
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=y
# CONFIG_FB_SAVAGE is not set
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
# CONFIG_FB_3DFX_I2C is not set
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
# CONFIG_FB_GEODE_LX is not set
# CONFIG_FB_GEODE_GX is not set
CONFIG_FB_GEODE_GX1=y
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_LTV350QV is not set
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
CONFIG_BACKLIGHT_SAHARA=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
# CONFIG_SND_DEBUG_VERBOSE is not set
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=y
CONFIG_SND_PORTMAN2X4=y
# CONFIG_SND_PCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_USX2Y=y
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_USB_US122L=y
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
# CONFIG_SOUND_SSCAPE is not set
CONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=y
CONFIG_SOUND_MPU401=y
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
CONFIG_SOUND_PSS=y
CONFIG_PSS_MIXER=y
# CONFIG_SOUND_SB is not set
CONFIG_SOUND_YM3812=y
CONFIG_SOUND_UART6850=y
# CONFIG_SOUND_AEDSP16 is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_CYPRESS is not set
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_HID_MICROSOFT is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_GREENASIA=y
CONFIG_GREENASIA_FF=y
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
CONFIG_USB_HWA_HCD=y
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
CONFIG_USB_MICROTEK=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=y
# CONFIG_USB_SERIAL_ARK3116 is not set
CONFIG_USB_SERIAL_BELKIN=y
CONFIG_USB_SERIAL_CH341=y
CONFIG_USB_SERIAL_WHITEHEAT=y
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=y
CONFIG_USB_SERIAL_CP210X=y
CONFIG_USB_SERIAL_CYPRESS_M8=y
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_FUNSOFT=y
# CONFIG_USB_SERIAL_VISOR is not set
CONFIG_USB_SERIAL_IPAQ=y
CONFIG_USB_SERIAL_IR=y
# CONFIG_USB_SERIAL_EDGEPORT is not set
CONFIG_USB_SERIAL_EDGEPORT_TI=y
CONFIG_USB_SERIAL_GARMIN=y
# CONFIG_USB_SERIAL_IPW is not set
CONFIG_USB_SERIAL_IUU=y
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=y
CONFIG_USB_SERIAL_KLSI=y
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=y
# CONFIG_USB_SERIAL_MOS7720 is not set
CONFIG_USB_SERIAL_MOS7840=y
CONFIG_USB_SERIAL_MOTOROLA=y
CONFIG_USB_SERIAL_NAVMAN=y
CONFIG_USB_SERIAL_PL2303=y
CONFIG_USB_SERIAL_OTI6858=y
CONFIG_USB_SERIAL_QUALCOMM=y
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=y
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=y
CONFIG_USB_SERIAL_SYMBOL=y
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=y
CONFIG_USB_SERIAL_XIRCOM=y
CONFIG_USB_SERIAL_OPTION=y
CONFIG_USB_SERIAL_OMNINET=y
CONFIG_USB_SERIAL_OPTICON=y
CONFIG_USB_SERIAL_DEBUG=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_BERRY_CHARGE=y
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=y
CONFIG_USB_TRANCEVIBRATOR=y
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
CONFIG_USB_VST=y
CONFIG_USB_ATM=y
CONFIG_USB_SPEEDTOUCH=y
# CONFIG_USB_CXACRU is not set
CONFIG_USB_UEAGLEATM=y
CONFIG_USB_XUSBATM=y
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=y
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=y
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_ALIX2=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_CLEVO_MAIL=y
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_IPOIB is not set
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_DEBUG_VERBOSE=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD64=y
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
CONFIG_EDAC_E752X=y
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
CONFIG_EDAC_X38=y
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
CONFIG_EDAC_I5100=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_DS1374=y
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_FM3130=y
# CONFIG_RTC_DRV_RX8581 is not set
CONFIG_RTC_DRV_RX8025=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS3234=y
CONFIG_RTC_DRV_PCF2123=y
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
CONFIG_RTC_DRV_BQ4802=y
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_WM831X=y
CONFIG_RTC_DRV_AB3100=y
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_WMI=y
CONFIG_FUJITSU_LAPTOP=y
CONFIG_FUJITSU_LAPTOP_DEBUG=y
CONFIG_HP_WMI=y
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_COMPAL_LAPTOP=y
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=y
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
CONFIG_THINKPAD_ACPI_DEBUG=y
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_EEEPC_LAPTOP=y
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
# CONFIG_EXT4_FS_XATTR is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
# CONFIG_PROC_VMCORE is not set
# CONFIG_PROC_SYSCTL is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ADFS_FS=y
CONFIG_ADFS_FS_RW=y
CONFIG_AFFS_FS=y
CONFIG_ECRYPT_FS=y
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_CODA_FS=y
CONFIG_AFS_FS=y
# CONFIG_AFS_DEBUG is not set
CONFIG_AFS_FSCACHE=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
CONFIG_ACORN_PARTITION_ADFS=y
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_FAULT_INJECTION=y
# CONFIG_FAILSLAB is not set
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
# CONFIG_FUNCTION_GRAPH_TRACER is not set
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BOOT_TRACER=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_SELFTEST=y
CONFIG_FTRACE_STARTUP_TEST=y
CONFIG_EVENT_TRACE_TEST_SYSCALLS=y
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_FIREWIRE_OHCI_REMOTE_DMA=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
CONFIG_KGDB_TESTS=y
# CONFIG_KGDB_TESTS_ON_BOOT is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_INTEL_TXT=y
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_FPU=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_NLATTR=y
[-- Attachment #3: hang.log --]
[-- Type: text/plain, Size: 5894 bytes --]
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel selinux=0 nmi_watchdog=0 panic=1 3
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan one early console"
2009-09-23 19:17 ` Ingo Molnar
@ 2009-09-23 21:05 ` Ingo Molnar
2009-09-23 21:19 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan " Jason Wessel
0 siblings, 1 reply; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 21:05 UTC (permalink / raw)
To: Jason Wessel, Len Brown
Cc: Greg KH, Linus Torvalds, Andrew Morton, linux-kernel, linux-usb
* Ingo Molnar <mingo@elte.hu> wrote:
> The commit point to which the attached config and bootlog belongs is:
>
> 2.6.31-07863-gb64ada6
>
> Reverting:
>
> c953094: early_printk: Allow more than one early console
>
> solves it.
btw., the boot options are:
Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug
initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel
selinux=0 nmi_watchdog=0 panic=1 3
So it's nothing out of the ordinary - typical early-printk use: handover
from earlyprintk serial console to the real serial console.
Ingo
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console"
2009-09-23 21:05 ` Ingo Molnar
@ 2009-09-23 21:19 ` Jason Wessel
2009-09-23 21:39 ` Ingo Molnar
2009-09-24 12:22 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console" Johannes Weiner
0 siblings, 2 replies; 20+ messages in thread
From: Jason Wessel @ 2009-09-23 21:19 UTC (permalink / raw)
To: Ingo Molnar
Cc: Len Brown, Greg KH, Linus Torvalds, Andrew Morton, linux-kernel,
linux-usb
Ingo Molnar wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
>
>
>> The commit point to which the attached config and bootlog belongs is:
>>
>> 2.6.31-07863-gb64ada6
>>
>> Reverting:
>>
>> c953094: early_printk: Allow more than one early console
>>
>> solves it.
>>
>
> btw., the boot options are:
>
> Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug
> initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel
> selinux=0 nmi_watchdog=0 panic=1 3
>
>
AH HA!
earlyprintk=serial,ttyS0,115200
You are invoking the same device twice which is why you are having infinite recursion. It was not obvious to me why the earlyprintk code would allow "serial" or "ttyS", but perhaps we need to protect for that?
Your boot line should be:
earlyprintk=serial,115200
OR
earlyprintk=ttyS0,115200
The line you had there before would have been the equivalent of doing:
earlyprintk=ttyS0,ttyS0,115200
Given this, do we still need to execute the revert your revert? Or perhaps do we need to add some protection?
Thanks,
Jason.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console"
2009-09-23 21:19 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan " Jason Wessel
@ 2009-09-23 21:39 ` Ingo Molnar
2009-09-23 22:39 ` [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan " Jason Wessel
2009-09-24 12:22 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console" Johannes Weiner
1 sibling, 1 reply; 20+ messages in thread
From: Ingo Molnar @ 2009-09-23 21:39 UTC (permalink / raw)
To: Jason Wessel
Cc: Len Brown, Greg KH, Linus Torvalds, Andrew Morton, linux-kernel,
linux-usb
* Jason Wessel <jason.wessel@windriver.com> wrote:
> Ingo Molnar wrote:
> > * Ingo Molnar <mingo@elte.hu> wrote:
> >
> >
> >
> >> The commit point to which the attached config and bootlog belongs is:
> >>
> >> 2.6.31-07863-gb64ada6
> >>
> >> Reverting:
> >>
> >> c953094: early_printk: Allow more than one early console
> >>
> >> solves it.
> >>
> >
> > btw., the boot options are:
> >
> > Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug
> > initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel
> > selinux=0 nmi_watchdog=0 panic=1 3
> >
> >
>
> AH HA!
>
> earlyprintk=serial,ttyS0,115200
>
> You are invoking the same device twice which is why you are having
> infinite recursion. It was not obvious to me why the earlyprintk code
> would allow "serial" or "ttyS", but perhaps we need to protect for
> that?
>
> Your boot line should be:
>
> earlyprintk=serial,115200
>
> OR
>
> earlyprintk=ttyS0,115200
ah, indeed!
> The line you had there before would have been the equivalent of doing:
>
> earlyprintk=ttyS0,ttyS0,115200
>
> Given this, do we still need to execute the revert your revert? Or
> perhaps do we need to add some protection?
I have such lines on other boxes too. I'd suggest to add protection if
it's not too ugly - the typoed line worked and was pretty natural to do,
and the failure mode is nasty enough.
Ingo
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan one early console"
2009-09-23 21:39 ` Ingo Molnar
@ 2009-09-23 22:39 ` Jason Wessel
2009-09-23 22:56 ` Linus Torvalds
0 siblings, 1 reply; 20+ messages in thread
From: Jason Wessel @ 2009-09-23 22:39 UTC (permalink / raw)
To: Ingo Molnar
Cc: Len Brown, Greg KH, Linus Torvalds, Andrew Morton, linux-kernel,
linux-usb
[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]
Ingo Molnar wrote:
> * Jason Wessel <jason.wessel@windriver.com> wrote:
>
>
>> Ingo Molnar wrote:
>>
>>> * Ingo Molnar <mingo@elte.hu> wrote:
>>>
>>>
>>>
>>>
>>>> The commit point to which the attached config and bootlog belongs is:
>>>>
>>>> 2.6.31-07863-gb64ada6
>>>>
>>>> Reverting:
>>>>
>>>> c953094: early_printk: Allow more than one early console
>>>>
>>>> solves it.
>>>>
>>>>
>>> btw., the boot options are:
>>>
>>> Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug
>>> initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel
>>> selinux=0 nmi_watchdog=0 panic=1 3
>>>
>>>
>>>
>> AH HA!
>>
>> earlyprintk=serial,ttyS0,115200
>>
>> You are invoking the same device twice which is why you are having
>> infinite recursion. It was not obvious to me why the earlyprintk code
>> would allow "serial" or "ttyS", but perhaps we need to protect for
>> that?
>>
>> Your boot line should be:
>>
>> earlyprintk=serial,115200
>>
>> OR
>>
>> earlyprintk=ttyS0,115200
>>
>
> ah, indeed!
>
>
>> The line you had there before would have been the equivalent of doing:
>>
>> earlyprintk=ttyS0,ttyS0,115200
>>
>> Given this, do we still need to execute the revert your revert? Or
>> perhaps do we need to add some protection?
>>
>
> I have such lines on other boxes too. I'd suggest to add protection if
> it's not too ugly - the typoed line worked and was pretty natural to do,
> and the failure mode is nasty enough.
>
> Ingo
>
Perhaps you will consider adding this patch to your tree? It fixes the
specific case you mentioned. It will still allow the board to boot and
instead of crashing, print a warning on the second instance.
Thanks,
Jason.
[-- Attachment #2: 0001-early_printk-Protect-against-using-the-same-device-t.patch --]
[-- Type: text/x-diff, Size: 1348 bytes --]
>From 2b34fcd7c99f442507fee3b79d8d5f18e873ecaf Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Sep 2009 17:34:42 -0500
Subject: [PATCH 1/1] early_printk: Protect against using the same device twice
If you use the kernel argument:
earlyprintk=serial,ttyS0,115200
This will cause a recursive crash. Instead warn the end user that they
specified the device a second time.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/x86/kernel/early_printk.c | 8 ++++++++
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..712661a 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -178,11 +178,19 @@ asmlinkage void early_printk(const char *fmt, ...)
static inline void early_console_register(struct console *con, int keep_early)
{
+ struct console *bcon;
+
early_console = con;
if (keep_early)
early_console->flags &= ~CON_BOOT;
else
early_console->flags |= CON_BOOT;
+ for (bcon = console_drivers; bcon != NULL; con = bcon->next)
+ if (strcmp(bcon->name, con->name) == 0) {
+ printk(KERN_CRIT "ERROR: earlyprintk= %s console"
+ " already defined\n", con->name);
+ return;
+ }
register_console(early_console);
}
--
1.6.3.1.9.g95405b
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan one early console"
2009-09-23 22:39 ` [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan " Jason Wessel
@ 2009-09-23 22:56 ` Linus Torvalds
2009-09-23 23:13 ` Jason Wessel
0 siblings, 1 reply; 20+ messages in thread
From: Linus Torvalds @ 2009-09-23 22:56 UTC (permalink / raw)
To: Jason Wessel
Cc: Ingo Molnar, Len Brown, Greg KH, Andrew Morton, linux-kernel, linux-usb
On Wed, 23 Sep 2009, Jason Wessel wrote:
>
> Perhaps you will consider adding this patch to your tree? It fixes the
> specific case you mentioned. It will still allow the board to boot and
> instead of crashing, print a warning on the second instance.
Ugh. This looks totally bogus.
Why don't you just add CON_REGISTERED to the console flags, and do
/* Already registered? */
if (early_console->flags & CON_REGISTERED)
return;
early_console->flags |= CON_REGISTERED;
there instead? That whole "loop over existing consoles to check their
names" looks silly and broken, and you're already playing with the flags
in there (CON_BOOT).
Linus
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan one early console"
2009-09-23 22:56 ` Linus Torvalds
@ 2009-09-23 23:13 ` Jason Wessel
2009-09-24 11:48 ` [tip:x86/urgent] x86: early_printk: Protect against using the same device twice tip-bot for Jason Wessel
0 siblings, 1 reply; 20+ messages in thread
From: Jason Wessel @ 2009-09-23 23:13 UTC (permalink / raw)
To: Linus Torvalds
Cc: Ingo Molnar, Len Brown, Greg KH, Andrew Morton, linux-kernel, linux-usb
[-- Attachment #1: Type: text/plain, Size: 899 bytes --]
Linus Torvalds wrote:
> On Wed, 23 Sep 2009, Jason Wessel wrote:
>
>> Perhaps you will consider adding this patch to your tree? It fixes the
>> specific case you mentioned. It will still allow the board to boot and
>> instead of crashing, print a warning on the second instance.
>>
>
> Ugh. This looks totally bogus.
>
> Why don't you just add CON_REGISTERED to the console flags, and do
>
> /* Already registered? */
> if (early_console->flags & CON_REGISTERED)
> return;
> early_console->flags |= CON_REGISTERED;
>
> there instead? That whole "loop over existing consoles to check their
> names" looks silly and broken, and you're already playing with the flags
> in there (CON_BOOT).
>
Seems reasonable to me. We don't even have to add a new flag, because
we already have the index set to != -1 when the console registration
succeeds.
Here is the revised patch.
Jason.
[-- Attachment #2: 0001-early_printk-Protect-against-using-the-same-device-t.patch --]
[-- Type: text/x-diff, Size: 1144 bytes --]
>From 66081d4a28cb17f58b09fe05a5a9c8441fc701ac Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Wed, 23 Sep 2009 18:11:31 -0500
Subject: [PATCH 1/1] early_printk: Protect against using the same device twice
If you use the kernel argument:
earlyprintk=serial,ttyS0,115200
This will cause a recursive crash. Instead warn the end user that they
specified the device a second time.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
arch/x86/kernel/early_printk.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..41fd965 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -178,6 +178,11 @@ asmlinkage void early_printk(const char *fmt, ...)
static inline void early_console_register(struct console *con, int keep_early)
{
+ if (early_console->index != -1) {
+ printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+ con->name);
+ return;
+ }
early_console = con;
if (keep_early)
early_console->flags &= ~CON_BOOT;
--
1.6.3.1.9.g95405b
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [tip:x86/urgent] x86: early_printk: Protect against using the same device twice
2009-09-23 23:13 ` Jason Wessel
@ 2009-09-24 11:48 ` tip-bot for Jason Wessel
0 siblings, 0 replies; 20+ messages in thread
From: tip-bot for Jason Wessel @ 2009-09-24 11:48 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, torvalds, jason.wessel, lenb, akpm,
gregkh, tglx, mingo
Commit-ID: 429a6e5e2c1fbe5d805aad123efbdb5f0c14769f
Gitweb: http://git.kernel.org/tip/429a6e5e2c1fbe5d805aad123efbdb5f0c14769f
Author: Jason Wessel <jason.wessel@windriver.com>
AuthorDate: Wed, 23 Sep 2009 18:13:13 -0500
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Thu, 24 Sep 2009 13:01:13 +0200
x86: early_printk: Protect against using the same device twice
If you use the kernel argument:
earlyprintk=serial,ttyS0,115200
This will cause a recursive hang printing the same line
again and again:
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Linux version 2.6.31-07863-gb64ada6 (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009
Instead warn the end user that they specified the device
a second time, and ignore that second console.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4ABAAB89.1080407@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/early_printk.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..41fd965 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -178,6 +178,11 @@ asmlinkage void early_printk(const char *fmt, ...)
static inline void early_console_register(struct console *con, int keep_early)
{
+ if (early_console->index != -1) {
+ printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+ con->name);
+ return;
+ }
early_console = con;
if (keep_early)
early_console->flags &= ~CON_BOOT;
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console"
2009-09-23 21:19 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan " Jason Wessel
2009-09-23 21:39 ` Ingo Molnar
@ 2009-09-24 12:22 ` Johannes Weiner
2009-09-24 14:08 ` Jason Wessel
1 sibling, 1 reply; 20+ messages in thread
From: Johannes Weiner @ 2009-09-24 12:22 UTC (permalink / raw)
To: Jason Wessel
Cc: Ingo Molnar, Len Brown, Greg KH, Linus Torvalds, Andrew Morton,
linux-kernel, linux-usb
On Wed, Sep 23, 2009 at 04:19:02PM -0500, Jason Wessel wrote:
> Ingo Molnar wrote:
> > * Ingo Molnar <mingo@elte.hu> wrote:
> >
> >
> >
> >> The commit point to which the attached config and bootlog belongs is:
> >>
> >> 2.6.31-07863-gb64ada6
> >>
> >> Reverting:
> >>
> >> c953094: early_printk: Allow more than one early console
> >>
> >> solves it.
> >>
> >
> > btw., the boot options are:
> >
> > Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug
> > initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel
> > selinux=0 nmi_watchdog=0 panic=1 3
> >
> >
>
> AH HA!
>
> earlyprintk=serial,ttyS0,115200
>
> You are invoking the same device twice which is why you are having
> infinite recursion. It was not obvious to me why the earlyprintk
> code would allow "serial" or "ttyS", but perhaps we need to protect
> for that?
That is how it's documented, quoting kernel-parameters.txt:
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
earlyprintk=dbgp
so ttySn is actually an option to the 'serial' mode. This has been
working before because we parsed only one mode but now we parse
serial,ttyS0,115200
correctly and then advance character-wise, looking for another
console:
erial,ttyS0,...
rial,ttyS0...
...
until we hit 'ttyS0,115200' which again we parse as a stand-alone
console definition, yielding twice the same one.
> Your boot line should be:
>
> earlyprintk=serial,115200
Sure this works? I haven't tried it, but the code looks like it would
misinterpret the baudrate as the port number, fail and advance to the
end of the string, and not set the baudrate at all. You can specify
ttyS0 standalone, but not serial alone.
It would probably make sense to skip what is successfully parsed
completely, perhaps like the (untested) diff below? The other init
functions would need to be converted too, so that we know how much
they peeked into the buffer.
---
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..62e1853 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -105,12 +105,12 @@ static void early_serial_write(struct console *con, const char *s, unsigned n)
#define DEFAULT_BAUD 9600
-static __init void early_serial_init(char *s)
+static __init void early_serial_init(char **sp)
{
unsigned char c;
unsigned divisor;
unsigned baud = DEFAULT_BAUD;
- char *e;
+ char *e, *s = *sp;
if (*s == ',')
++s;
@@ -143,6 +143,9 @@ static __init void early_serial_init(char *s)
baud = simple_strtoul(s, &e, 0);
if (baud == 0 || s == e)
baud = DEFAULT_BAUD;
+ s += strcspn(s, ",");
+ if (*s == ',')
+ s++;
}
divisor = 115200 / baud;
@@ -151,6 +154,8 @@ static __init void early_serial_init(char *s)
outb(divisor & 0xff, early_serial_base + DLL);
outb((divisor >> 8) & 0xff, early_serial_base + DLH);
outb(c & ~DLAB, early_serial_base + LCR);
+
+ *sp = s;
}
static struct console early_serial_console = {
@@ -201,12 +206,16 @@ static int __init setup_early_printk(char *buf)
while (*buf != '\0') {
if (!strncmp(buf, "serial", 6)) {
- early_serial_init(buf + 6);
+ buf += 6;
+ early_serial_init(&buf);
early_console_register(&early_serial_console, keep);
+ continue;
}
if (!strncmp(buf, "ttyS", 4)) {
- early_serial_init(buf + 4);
+ buf += 4;
+ early_serial_init(&buf);
early_console_register(&early_serial_console, keep);
+ continue;
}
if (!strncmp(buf, "vga", 3) &&
boot_params.screen_info.orig_video_isVGA == 1) {
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console"
2009-09-24 12:22 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console" Johannes Weiner
@ 2009-09-24 14:08 ` Jason Wessel
2009-10-01 8:34 ` Ingo Molnar
2009-10-01 9:58 ` [tip:x86/urgent] x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg tip-bot for Jason Wessel
0 siblings, 2 replies; 20+ messages in thread
From: Jason Wessel @ 2009-09-24 14:08 UTC (permalink / raw)
To: Johannes Weiner
Cc: Ingo Molnar, Len Brown, Greg KH, Linus Torvalds, Andrew Morton,
linux-kernel, linux-usb
[-- Attachment #1: Type: text/plain, Size: 2561 bytes --]
Johannes Weiner wrote:
> On Wed, Sep 23, 2009 at 04:19:02PM -0500, Jason Wessel wrote:
>
>> Ingo Molnar wrote:
>>
>>> * Ingo Molnar <mingo@elte.hu> wrote:
>>>
>>>
>>>
>>>
>>>> The commit point to which the attached config and bootlog belongs is:
>>>>
>>>> 2.6.31-07863-gb64ada6
>>>>
>>>> Reverting:
>>>>
>>>> c953094: early_printk: Allow more than one early console
>>>>
>>>> solves it.
>>>>
>>>>
>>> btw., the boot options are:
>>>
>>> Command line: root=/dev/sda6 earlyprintk=serial,ttyS0,115200 console=ttyS0,115200 debug
>>> initcall_debug apic=verbose sysrq_always_enabled ignore_loglevel
>>> selinux=0 nmi_watchdog=0 panic=1 3
>>>
>>>
>>>
>> AH HA!
>>
>> earlyprintk=serial,ttyS0,115200
>>
>> You are invoking the same device twice which is why you are having
>> infinite recursion. It was not obvious to me why the earlyprintk
>> code would allow "serial" or "ttyS", but perhaps we need to protect
>> for that?
>>
>
> That is how it's documented, quoting kernel-parameters.txt:
>
> earlyprintk=vga
> earlyprintk=serial[,ttySn[,baudrate]]
> earlyprintk=dbgp
>
> so ttySn is actually an option to the 'serial' mode. This has been
> working before because we parsed only one mode but now we parse
>
> serial,ttyS0,115200
>
> correctly and then advance character-wise, looking for another
> console:
>
> erial,ttyS0,...
> rial,ttyS0...
> ...
>
> until we hit 'ttyS0,115200' which again we parse as a stand-alone
> console definition, yielding twice the same one.
>
>
>> Your boot line should be:
>>
>> earlyprintk=serial,115200
>>
>
> Sure this works? I haven't tried it, but the code looks like it would
> misinterpret the baudrate as the port number, fail and advance to the
> end of the string, and not set the baudrate at all. You can specify
> ttyS0 standalone, but not serial alone.
>
>
Perhaps not. I see the documentation needs an update though because it
did not match the code, for the case of just using ttyS0 or ttyS1 directly.
> It would probably make sense to skip what is successfully parsed
> completely, perhaps like the (untested) diff below? The other init
> functions would need to be converted too, so that we know how much
> they peeked into the buffer.
>
>
We can simply check the extra arg case after the parsing and advance,
instead of modifying all the functions. Then it is all backward compatible.
The fully tested patch follows.
Ingo if you agree, can you pull in this patch? Or comment and I'll make
some further adjustments.
Thanks,
Jason.
[-- Attachment #2: 0001-x86-earlyprintk-Fix-regression-to-handle-serial-ttyS.patch --]
[-- Type: text/x-diff, Size: 1958 bytes --]
>From 047b893e33041dbaf17b2a7eb03ea20486344d6f Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Thu, 24 Sep 2009 09:00:01 -0500
Subject: [PATCH 1/1] x86,earlyprintk: Fix regression to handle serial,ttySn as 1 arg
Commit c9530948bc626c8b638015c0b32abb9615659ec6 introduced a
regression in the parsing of the earlyprintk= kernel arguments.
If you specify "earlyprintk=serial,ttyS0,115200" as a kernel argument,
the "serial,ttyS" should be parsed as a single argument and not as
"serial" and then "ttyS".
Also update the documentation to reflect you can specify the ttyS
directly without the "serial" argument.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
---
Documentation/kernel-parameters.txt | 1 +
arch/x86/kernel/early_printk.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6fa7292..9107b38 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
+ earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
Append ",keep" to not disable it when the real console
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..b7bfdd5 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -201,8 +201,11 @@ static int __init setup_early_printk(char *buf)
while (*buf != '\0') {
if (!strncmp(buf, "serial", 6)) {
- early_serial_init(buf + 6);
+ buf += 6;
+ early_serial_init(buf);
early_console_register(&early_serial_console, keep);
+ if (!strncmp(buf, ",ttyS", 5))
+ buf += 5;
}
if (!strncmp(buf, "ttyS", 4)) {
early_serial_init(buf + 4);
--
1.6.3.1.9.g95405b
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console"
2009-09-24 14:08 ` Jason Wessel
@ 2009-10-01 8:34 ` Ingo Molnar
2009-10-01 9:58 ` [tip:x86/urgent] x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg tip-bot for Jason Wessel
1 sibling, 0 replies; 20+ messages in thread
From: Ingo Molnar @ 2009-10-01 8:34 UTC (permalink / raw)
To: Jason Wessel
Cc: Johannes Weiner, Len Brown, Greg KH, Linus Torvalds,
Andrew Morton, linux-kernel, linux-usb
* Jason Wessel <jason.wessel@windriver.com> wrote:
> >From 047b893e33041dbaf17b2a7eb03ea20486344d6f Mon Sep 17 00:00:00 2001
> From: Jason Wessel <jason.wessel@windriver.com>
> Date: Thu, 24 Sep 2009 09:00:01 -0500
> Subject: [PATCH 1/1] x86,earlyprintk: Fix regression to handle serial,ttySn as 1 arg
>
> Commit c9530948bc626c8b638015c0b32abb9615659ec6 introduced a
> regression in the parsing of the earlyprintk= kernel arguments.
>
> If you specify "earlyprintk=serial,ttyS0,115200" as a kernel argument,
> the "serial,ttyS" should be parsed as a single argument and not as
> "serial" and then "ttyS".
>
> Also update the documentation to reflect you can specify the ttyS
> directly without the "serial" argument.
>
> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
> ---
> Documentation/kernel-parameters.txt | 1 +
> arch/x86/kernel/early_printk.c | 5 ++++-
> 2 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index 6fa7292..9107b38 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
> earlyprintk= [X86,SH,BLACKFIN]
> earlyprintk=vga
> earlyprintk=serial[,ttySn[,baudrate]]
> + earlyprintk=ttySn[,baudrate]
> earlyprintk=dbgp[debugController#]
>
> Append ",keep" to not disable it when the real console
> diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
> index 2acfd3f..b7bfdd5 100644
> --- a/arch/x86/kernel/early_printk.c
> +++ b/arch/x86/kernel/early_printk.c
> @@ -201,8 +201,11 @@ static int __init setup_early_printk(char *buf)
>
> while (*buf != '\0') {
> if (!strncmp(buf, "serial", 6)) {
> - early_serial_init(buf + 6);
> + buf += 6;
> + early_serial_init(buf);
> early_console_register(&early_serial_console, keep);
> + if (!strncmp(buf, ",ttyS", 5))
> + buf += 5;
> }
Looks good, beyond the tab-as-four-spaces ugliness which i fixed.
( and the 5/6 literals look a bit ugly too but are obvious and i dont
see a cleaner way to write them. )
Thanks,
Ingo
^ permalink raw reply [flat|nested] 20+ messages in thread
* [tip:x86/urgent] x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg
2009-09-24 14:08 ` Jason Wessel
2009-10-01 8:34 ` Ingo Molnar
@ 2009-10-01 9:58 ` tip-bot for Jason Wessel
1 sibling, 0 replies; 20+ messages in thread
From: tip-bot for Jason Wessel @ 2009-10-01 9:58 UTC (permalink / raw)
To: linux-tip-commits
Cc: linux-kernel, hpa, mingo, torvalds, jason.wessel, hannes, lenb,
akpm, gregkh, tglx, mingo
Commit-ID: ea3acb199a5d7e4da1de0a4288eba993b29f33b9
Gitweb: http://git.kernel.org/tip/ea3acb199a5d7e4da1de0a4288eba993b29f33b9
Author: Jason Wessel <jason.wessel@windriver.com>
AuthorDate: Thu, 24 Sep 2009 09:08:30 -0500
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Thu, 1 Oct 2009 10:34:16 +0200
x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg
Commit c953094 ("early_printk: Allow more than one early console")
introduced a regression in the parsing of the earlyprintk= kernel
arguments.
If you specify "earlyprintk=serial,ttyS0,115200" as a kernel
argument, the "serial,ttyS" should be parsed as a single argument
and not as "serial" and then "ttyS".
Also update the documentation to reflect you can specify the ttyS
directly without the "serial" argument.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
LKML-Reference: <4ABB7D5E.6000301@windriver.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
Documentation/kernel-parameters.txt | 1 +
arch/x86/kernel/early_printk.c | 5 ++++-
2 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6fa7292..9107b38 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
+ earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
Append ",keep" to not disable it when the real console
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 41fd965..b9c830c 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -206,8 +206,11 @@ static int __init setup_early_printk(char *buf)
while (*buf != '\0') {
if (!strncmp(buf, "serial", 6)) {
- early_serial_init(buf + 6);
+ buf += 6;
+ early_serial_init(buf);
early_console_register(&early_serial_console, keep);
+ if (!strncmp(buf, ",ttyS", 5))
+ buf += 5;
}
if (!strncmp(buf, "ttyS", 4)) {
early_serial_init(buf + 4);
^ permalink raw reply related [flat|nested] 20+ messages in thread
end of thread, other threads:[~2009-10-01 9:59 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-09-23 13:55 [GIT PATCH] USB patches for 2.6.31-git Greg KH
2009-09-23 17:24 ` [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM Ingo Molnar
2009-09-23 17:32 ` Randy Dunlap
2009-09-23 17:39 ` Ingo Molnar
2009-09-23 17:34 ` Greg KH
2009-09-23 17:37 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow more than one early console" Ingo Molnar
2009-09-23 17:57 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan " Jason Wessel
2009-09-23 19:02 ` Ingo Molnar
2009-09-23 19:17 ` Ingo Molnar
2009-09-23 21:05 ` Ingo Molnar
2009-09-23 21:19 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan " Jason Wessel
2009-09-23 21:39 ` Ingo Molnar
2009-09-23 22:39 ` [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan " Jason Wessel
2009-09-23 22:56 ` Linus Torvalds
2009-09-23 23:13 ` Jason Wessel
2009-09-24 11:48 ` [tip:x86/urgent] x86: early_printk: Protect against using the same device twice tip-bot for Jason Wessel
2009-09-24 12:22 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console" Johannes Weiner
2009-09-24 14:08 ` Jason Wessel
2009-10-01 8:34 ` Ingo Molnar
2009-10-01 9:58 ` [tip:x86/urgent] x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg tip-bot for Jason Wessel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.