* Re: [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure [not found] ` <1257221513.11048.1.camel@munipradeep-laptop> @ 2009-11-03 8:46 ` Subrata Modak 2009-11-03 13:01 ` Garrett Cooper 0 siblings, 1 reply; 10+ messages in thread From: Subrata Modak @ 2009-11-03 8:46 UTC (permalink / raw) To: Munipradeep Beerakam, Garrett Cooper; +Cc: ltp-list Muni, This should be reported to LTP Mailing list. Garret, can you just look into this ? Regards-- Subrata On Tue, 2009-11-03 at 09:41 +0530, Munipradeep Beerakam wrote: > Hi, > > In addition to that I also got the below warning as well. Forgot to add > it before. > > configure: WARNING: linux/netlink.h: present but cannot be compiled > configure: WARNING: linux/netlink.h: check for missing prerequisite > headers? > configure: WARNING: linux/netlink.h: see the Autoconf documentation > configure: WARNING: linux/netlink.h: section "Present But Cannot Be > Compiled" > configure: WARNING: linux/netlink.h: proceeding with the preprocessor's > result > configure: WARNING: linux/netlink.h: in the future, the compiler will > take precedence > configure: WARNING: ## > ------------------------------------------------ ## > configure: WARNING: ## Report this to > ltp-results@lists.sourceforge.net ## > configure: WARNING: ## > ------------------------------------------------ ## > > Thanks > Muni > > On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: > > Hi, > > > > I got the following warning messages while running "./configure" on the > > ltp-full-20091031. However, make and make install worked fine. > > > > configure: WARNING: linux/genetlink.h: present but cannot be compiled > > configure: WARNING: linux/genetlink.h: check for missing > > prerequisite headers? > > configure: WARNING: linux/genetlink.h: see the Autoconf documentation > > configure: WARNING: linux/genetlink.h: section "Present But Cannot > > Be Compiled" > > configure: WARNING: linux/genetlink.h: proceeding with the > > preprocessor's result > > configure: WARNING: linux/genetlink.h: in the future, the compiler will > > take precedence > > configure: WARNING: ## > > ------------------------------------------------ ## > > configure: WARNING: ## Report this to > > ltp-results@lists.sourceforge.net ## > > configure: WARNING: ## > > ------------------------------------------------ ## > > > ------------------------------------------------------------------------------ > Come build with us! The BlackBerry(R) Developer Conference in SF, CA > is the only developer event you need to attend this year. Jumpstart your > developing skills, take BlackBerry mobile applications to market and stay > ahead of the curve. Join us from November 9 - 12, 2009. Register now! > http://p.sf.net/sfu/devconference > _______________________________________________ > Ltp-results mailing list > Ltp-results@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/ltp-results ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure 2009-11-03 8:46 ` [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure Subrata Modak @ 2009-11-03 13:01 ` Garrett Cooper 2009-11-03 15:50 ` Mike Frysinger 0 siblings, 1 reply; 10+ messages in thread From: Garrett Cooper @ 2009-11-03 13:01 UTC (permalink / raw) To: subrata; +Cc: ltp-list On Tue, Nov 3, 2009 at 12:46 AM, Subrata Modak <subrata@linux.vnet.ibm.com> wrote: > Muni, > > This should be reported to LTP Mailing list. Garret, can you just look > into this ? > > Regards-- > Subrata > > On Tue, 2009-11-03 at 09:41 +0530, Munipradeep Beerakam wrote: >> Hi, >> >> In addition to that I also got the below warning as well. Forgot to add >> it before. >> >> configure: WARNING: linux/netlink.h: present but cannot be compiled >> configure: WARNING: linux/netlink.h: check for missing prerequisite >> headers? >> configure: WARNING: linux/netlink.h: see the Autoconf documentation >> configure: WARNING: linux/netlink.h: section "Present But Cannot Be >> Compiled" >> configure: WARNING: linux/netlink.h: proceeding with the preprocessor's >> result >> configure: WARNING: linux/netlink.h: in the future, the compiler will >> take precedence >> configure: WARNING: ## >> ------------------------------------------------ ## >> configure: WARNING: ## Report this to >> ltp-results@lists.sourceforge.net ## >> configure: WARNING: ## >> ------------------------------------------------ ## >> >> Thanks >> Muni >> >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: >> > Hi, >> > >> > I got the following warning messages while running "./configure" on the >> > ltp-full-20091031. However, make and make install worked fine. >> > >> > configure: WARNING: linux/genetlink.h: present but cannot be compiled >> > configure: WARNING: linux/genetlink.h: check for missing >> > prerequisite headers? >> > configure: WARNING: linux/genetlink.h: see the Autoconf documentation >> > configure: WARNING: linux/genetlink.h: section "Present But Cannot >> > Be Compiled" >> > configure: WARNING: linux/genetlink.h: proceeding with the >> > preprocessor's result >> > configure: WARNING: linux/genetlink.h: in the future, the compiler will >> > take precedence >> > configure: WARNING: ## >> > ------------------------------------------------ ## >> > configure: WARNING: ## Report this to >> > ltp-results@lists.sourceforge.net ## >> > configure: WARNING: ## >> > ------------------------------------------------ ## Yeah -- I need to find the header that defines u32 (instead of uint32 or uint32_t). Does anyone know which one was that again? I thought it was a kernel specific datatype (and in that event it shouldn't be exported). Thanks, -Garrett ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure 2009-11-03 13:01 ` Garrett Cooper @ 2009-11-03 15:50 ` Mike Frysinger 2009-11-03 16:05 ` Garrett Cooper 0 siblings, 1 reply; 10+ messages in thread From: Mike Frysinger @ 2009-11-03 15:50 UTC (permalink / raw) To: ltp-list; +Cc: ltp-list [-- Attachment #1.1: Type: Text/Plain, Size: 1524 bytes --] On Tuesday 03 November 2009 08:01:08 Garrett Cooper wrote: > >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: > >> > I got the following warning messages while running "./configure" on > >> > the ltp-full-20091031. However, make and make install worked fine. > >> > > >> > configure: WARNING: linux/genetlink.h: present but cannot be compiled > >> > configure: WARNING: linux/genetlink.h: check for missing > >> > prerequisite headers? > >> > configure: WARNING: linux/genetlink.h: see the Autoconf documentation > >> > configure: WARNING: linux/genetlink.h: section "Present But Cannot > >> > Be Compiled" > >> > configure: WARNING: linux/genetlink.h: proceeding with the > >> > preprocessor's result > >> > configure: WARNING: linux/genetlink.h: in the future, the compiler > >> > will take precedence > >> > configure: WARNING: ## > >> > ------------------------------------------------ ## > >> > configure: WARNING: ## Report this to > >> > ltp-results@lists.sourceforge.net ## > >> > configure: WARNING: ## > >> > ------------------------------------------------ ## > > Yeah -- I need to find the header that defines u32 (instead of > uint32 or uint32_t). Does anyone know which one was that again? I > thought it was a kernel specific datatype (and in that event it > shouldn't be exported). correct -- nothing in userspace should be using u32. if the kernel headers are, they're broken and need fixing, so complain to lkml/your distro. -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 399 bytes --] ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure 2009-11-03 15:50 ` Mike Frysinger @ 2009-11-03 16:05 ` Garrett Cooper 2009-11-03 16:30 ` Mike Frysinger 0 siblings, 1 reply; 10+ messages in thread From: Garrett Cooper @ 2009-11-03 16:05 UTC (permalink / raw) To: Mike Frysinger; +Cc: ltp-list, ltp-list On Tue, Nov 3, 2009 at 7:50 AM, Mike Frysinger <vapier@gentoo.org> wrote: > On Tuesday 03 November 2009 08:01:08 Garrett Cooper wrote: >> >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: >> >> > I got the following warning messages while running "./configure" on >> >> > the ltp-full-20091031. However, make and make install worked fine. >> >> > >> >> > configure: WARNING: linux/genetlink.h: present but cannot be compiled >> >> > configure: WARNING: linux/genetlink.h: check for missing >> >> > prerequisite headers? >> >> > configure: WARNING: linux/genetlink.h: see the Autoconf documentation >> >> > configure: WARNING: linux/genetlink.h: section "Present But Cannot >> >> > Be Compiled" >> >> > configure: WARNING: linux/genetlink.h: proceeding with the >> >> > preprocessor's result >> >> > configure: WARNING: linux/genetlink.h: in the future, the compiler >> >> > will take precedence >> >> > configure: WARNING: ## >> >> > ------------------------------------------------ ## >> >> > configure: WARNING: ## Report this to >> >> > ltp-results@lists.sourceforge.net ## >> >> > configure: WARNING: ## >> >> > ------------------------------------------------ ## >> >> Yeah -- I need to find the header that defines u32 (instead of >> uint32 or uint32_t). Does anyone know which one was that again? I >> thought it was a kernel specific datatype (and in that event it >> shouldn't be exported). > > correct -- nothing in userspace should be using u32. if the kernel headers > are, they're broken and need fixing, so complain to lkml/your distro. That's what I figured -- ok. The test and the app should also be converted to straight linux/genetlink.h, because linux/genetlink.h is a superset of linux/netlink.h. Thanks, -Garrett ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure 2009-11-03 16:05 ` Garrett Cooper @ 2009-11-03 16:30 ` Mike Frysinger 2009-11-09 17:39 ` [LTP] " Subrata Modak 0 siblings, 1 reply; 10+ messages in thread From: Mike Frysinger @ 2009-11-03 16:30 UTC (permalink / raw) To: Garrett Cooper; +Cc: ltp-list, ltp-list [-- Attachment #1.1: Type: Text/Plain, Size: 2191 bytes --] On Tuesday 03 November 2009 11:05:10 Garrett Cooper wrote: > On Tue, Nov 3, 2009 at 7:50 AM, Mike Frysinger <vapier@gentoo.org> wrote: > > On Tuesday 03 November 2009 08:01:08 Garrett Cooper wrote: > >> >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: > >> >> > I got the following warning messages while running "./configure" on > >> >> > the ltp-full-20091031. However, make and make install worked fine. > >> >> > > >> >> > configure: WARNING: linux/genetlink.h: present but cannot be > >> >> > compiled configure: WARNING: linux/genetlink.h: check for > >> >> > missing prerequisite headers? > >> >> > configure: WARNING: linux/genetlink.h: see the Autoconf > >> >> > documentation configure: WARNING: linux/genetlink.h: section > >> >> > "Present But Cannot Be Compiled" > >> >> > configure: WARNING: linux/genetlink.h: proceeding with the > >> >> > preprocessor's result > >> >> > configure: WARNING: linux/genetlink.h: in the future, the compiler > >> >> > will take precedence > >> >> > configure: WARNING: ## > >> >> > ------------------------------------------------ ## > >> >> > configure: WARNING: ## Report this to > >> >> > ltp-results@lists.sourceforge.net ## > >> >> > configure: WARNING: ## > >> >> > ------------------------------------------------ ## > >> > >> Yeah -- I need to find the header that defines u32 (instead of > >> uint32 or uint32_t). Does anyone know which one was that again? I > >> thought it was a kernel specific datatype (and in that event it > >> shouldn't be exported). > > > > correct -- nothing in userspace should be using u32. if the kernel > > headers are, they're broken and need fixing, so complain to lkml/your > > distro. > > That's what I figured -- ok. The test and the app should also be > converted to straight linux/genetlink.h, because linux/genetlink.h is > a superset of linux/netlink.h. we should get Subrata to generate the release with newer versions of autotools (like autoconf-2.64) so that these warnings dont show up. if the header cant be compiled, then we want it marked as not usable and so the related tests get skipped. -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 399 bytes --] ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] Got warning message on ltp-full-20091031 while running ./configure 2009-11-03 16:30 ` Mike Frysinger @ 2009-11-09 17:39 ` Subrata Modak 2009-11-09 19:22 ` Mike Frysinger 0 siblings, 1 reply; 10+ messages in thread From: Subrata Modak @ 2009-11-09 17:39 UTC (permalink / raw) To: Mike Frysinger; +Cc: ltp-list On Tue, 2009-11-03 at 12:30 -0400, Mike Frysinger wrote: > On Tuesday 03 November 2009 11:05:10 Garrett Cooper wrote: > > On Tue, Nov 3, 2009 at 7:50 AM, Mike Frysinger <vapier@gentoo.org> wrote: > > > On Tuesday 03 November 2009 08:01:08 Garrett Cooper wrote: > > >> >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: > > >> >> > I got the following warning messages while running "./configure" on > > >> >> > the ltp-full-20091031. However, make and make install worked fine. > > >> >> > > > >> >> > configure: WARNING: linux/genetlink.h: present but cannot be > > >> >> > compiled configure: WARNING: linux/genetlink.h: check for > > >> >> > missing prerequisite headers? > > >> >> > configure: WARNING: linux/genetlink.h: see the Autoconf > > >> >> > documentation configure: WARNING: linux/genetlink.h: section > > >> >> > "Present But Cannot Be Compiled" > > >> >> > configure: WARNING: linux/genetlink.h: proceeding with the > > >> >> > preprocessor's result > > >> >> > configure: WARNING: linux/genetlink.h: in the future, the compiler > > >> >> > will take precedence > > >> >> > configure: WARNING: ## > > >> >> > ------------------------------------------------ ## > > >> >> > configure: WARNING: ## Report this to > > >> >> > ltp-results@lists.sourceforge.net ## > > >> >> > configure: WARNING: ## > > >> >> > ------------------------------------------------ ## > > >> > > >> Yeah -- I need to find the header that defines u32 (instead of > > >> uint32 or uint32_t). Does anyone know which one was that again? I > > >> thought it was a kernel specific datatype (and in that event it > > >> shouldn't be exported). > > > > > > correct -- nothing in userspace should be using u32. if the kernel > > > headers are, they're broken and need fixing, so complain to lkml/your > > > distro. > > > > That's what I figured -- ok. The test and the app should also be > > converted to straight linux/genetlink.h, because linux/genetlink.h is > > a superset of linux/netlink.h. > > we should get Subrata to generate the release with newer versions of autotools > (like autoconf-2.64) so that these warnings dont show up. if the header cant I upgraded my system to 2.64 just now. $ /usr/bin/autoconf --version autoconf (GNU Autoconf) 2.64 Copyright (C) 2009 Free Software Foundation, Inc. License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/old-licenses/gpl-2.0.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Written by David J. MacKenzie and Akim Demaille. Hope this would solve all such problems. Regards-- Subrata > be compiled, then we want it marked as not usable and so the related tests get > skipped. > -mike ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] Got warning message on ltp-full-20091031 while running ./configure 2009-11-09 17:39 ` [LTP] " Subrata Modak @ 2009-11-09 19:22 ` Mike Frysinger 2009-11-09 19:55 ` Garrett Cooper 0 siblings, 1 reply; 10+ messages in thread From: Mike Frysinger @ 2009-11-09 19:22 UTC (permalink / raw) To: subrata; +Cc: ltp-list [-- Attachment #1.1: Type: Text/Plain, Size: 3032 bytes --] On Monday 09 November 2009 12:39:21 Subrata Modak wrote: > On Tue, 2009-11-03 at 12:30 -0400, Mike Frysinger wrote: > > On Tuesday 03 November 2009 11:05:10 Garrett Cooper wrote: > > > On Tue, Nov 3, 2009 at 7:50 AM, Mike Frysinger wrote: > > > > On Tuesday 03 November 2009 08:01:08 Garrett Cooper wrote: > > > >> >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: > > > >> >> > I got the following warning messages while running > > > >> >> > "./configure" on the ltp-full-20091031. However, make and make > > > >> >> > install worked fine. > > > >> >> > > > > >> >> > configure: WARNING: linux/genetlink.h: present but cannot be > > > >> >> > compiled configure: WARNING: linux/genetlink.h: check for > > > >> >> > missing prerequisite headers? > > > >> >> > configure: WARNING: linux/genetlink.h: see the Autoconf > > > >> >> > documentation configure: WARNING: linux/genetlink.h: > > > >> >> > section "Present But Cannot Be Compiled" > > > >> >> > configure: WARNING: linux/genetlink.h: proceeding with the > > > >> >> > preprocessor's result > > > >> >> > configure: WARNING: linux/genetlink.h: in the future, the > > > >> >> > compiler will take precedence > > > >> >> > configure: WARNING: ## > > > >> >> > ------------------------------------------------ ## > > > >> >> > configure: WARNING: ## Report this to > > > >> >> > ltp-results@lists.sourceforge.net ## > > > >> >> > configure: WARNING: ## > > > >> >> > ------------------------------------------------ ## > > > >> > > > >> Yeah -- I need to find the header that defines u32 (instead of > > > >> uint32 or uint32_t). Does anyone know which one was that again? I > > > >> thought it was a kernel specific datatype (and in that event it > > > >> shouldn't be exported). > > > > > > > > correct -- nothing in userspace should be using u32. if the kernel > > > > headers are, they're broken and need fixing, so complain to lkml/your > > > > distro. > > > > > > That's what I figured -- ok. The test and the app should also be > > > converted to straight linux/genetlink.h, because linux/genetlink.h is > > > a superset of linux/netlink.h. > > > > we should get Subrata to generate the release with newer versions of > > autotools (like autoconf-2.64) so that these warnings dont show up. if > > the header cant > > I upgraded my system to 2.64 just now. > > $ /usr/bin/autoconf --version > autoconf (GNU Autoconf) 2.64 > Copyright (C) 2009 Free Software Foundation, Inc. > License GPLv2+: GNU GPL version 2 or later > <http://gnu.org/licenses/old-licenses/gpl-2.0.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > Written by David J. MacKenzie and Akim Demaille. > > Hope this would solve all such problems. well, the configure script wasnt really broken before. people just cant handle any sort of warning message and reading the related log files can be too much. -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 354 bytes --] ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] Got warning message on ltp-full-20091031 while running ./configure 2009-11-09 19:22 ` Mike Frysinger @ 2009-11-09 19:55 ` Garrett Cooper 2009-11-09 20:19 ` Mike Frysinger 0 siblings, 1 reply; 10+ messages in thread From: Garrett Cooper @ 2009-11-09 19:55 UTC (permalink / raw) To: Mike Frysinger; +Cc: ltp-list On Mon, Nov 9, 2009 at 11:22 AM, Mike Frysinger <vapier@gentoo.org> wrote: > On Monday 09 November 2009 12:39:21 Subrata Modak wrote: >> On Tue, 2009-11-03 at 12:30 -0400, Mike Frysinger wrote: >> > On Tuesday 03 November 2009 11:05:10 Garrett Cooper wrote: >> > > On Tue, Nov 3, 2009 at 7:50 AM, Mike Frysinger wrote: >> > > > On Tuesday 03 November 2009 08:01:08 Garrett Cooper wrote: >> > > >> >> On Tue, 2009-11-03 at 09:26 +0530, Munipradeep Beerakam wrote: >> > > >> >> > I got the following warning messages while running >> > > >> >> > "./configure" on the ltp-full-20091031. However, make and make >> > > >> >> > install worked fine. >> > > >> >> > >> > > >> >> > configure: WARNING: linux/genetlink.h: present but cannot be >> > > >> >> > compiled configure: WARNING: linux/genetlink.h: check for >> > > >> >> > missing prerequisite headers? >> > > >> >> > configure: WARNING: linux/genetlink.h: see the Autoconf >> > > >> >> > documentation configure: WARNING: linux/genetlink.h: >> > > >> >> > section "Present But Cannot Be Compiled" >> > > >> >> > configure: WARNING: linux/genetlink.h: proceeding with the >> > > >> >> > preprocessor's result >> > > >> >> > configure: WARNING: linux/genetlink.h: in the future, the >> > > >> >> > compiler will take precedence >> > > >> >> > configure: WARNING: ## >> > > >> >> > ------------------------------------------------ ## >> > > >> >> > configure: WARNING: ## Report this to >> > > >> >> > ltp-results@lists.sourceforge.net ## >> > > >> >> > configure: WARNING: ## >> > > >> >> > ------------------------------------------------ ## >> > > >> >> > > >> Yeah -- I need to find the header that defines u32 (instead of >> > > >> uint32 or uint32_t). Does anyone know which one was that again? I >> > > >> thought it was a kernel specific datatype (and in that event it >> > > >> shouldn't be exported). >> > > > >> > > > correct -- nothing in userspace should be using u32. if the kernel >> > > > headers are, they're broken and need fixing, so complain to lkml/your >> > > > distro. >> > > >> > > That's what I figured -- ok. The test and the app should also be >> > > converted to straight linux/genetlink.h, because linux/genetlink.h is >> > > a superset of linux/netlink.h. >> > >> > we should get Subrata to generate the release with newer versions of >> > autotools (like autoconf-2.64) so that these warnings dont show up. if >> > the header cant >> >> I upgraded my system to 2.64 just now. >> >> $ /usr/bin/autoconf --version >> autoconf (GNU Autoconf) 2.64 >> Copyright (C) 2009 Free Software Foundation, Inc. >> License GPLv2+: GNU GPL version 2 or later >> <http://gnu.org/licenses/old-licenses/gpl-2.0.html> >> This is free software: you are free to change and redistribute it. >> There is NO WARRANTY, to the extent permitted by law. >> Written by David J. MacKenzie and Akim Demaille. >> >> Hope this would solve all such problems. > > well, the configure script wasnt really broken before. people just cant > handle any sort of warning message and reading the related log files can be > too much. I think we're kind of at fault for not having AC_MSG_INFO instead of AC_MSG_WARN, but oh well... AC_MSG_WARN is designed to be terse :]. -Garrett ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] Got warning message on ltp-full-20091031 while running ./configure 2009-11-09 19:55 ` Garrett Cooper @ 2009-11-09 20:19 ` Mike Frysinger 2009-11-10 7:18 ` Garrett Cooper 0 siblings, 1 reply; 10+ messages in thread From: Mike Frysinger @ 2009-11-09 20:19 UTC (permalink / raw) To: Garrett Cooper; +Cc: ltp-list [-- Attachment #1.1: Type: Text/Plain, Size: 641 bytes --] On Monday 09 November 2009 14:55:54 Garrett Cooper wrote: > On Mon, Nov 9, 2009 at 11:22 AM, Mike Frysinger wrote: > > well, the configure script wasnt really broken before. people just cant > > handle any sort of warning message and reading the related log files can > > be too much. > > I think we're kind of at fault for not having AC_MSG_INFO instead > of AC_MSG_WARN, but oh well... AC_MSG_WARN is designed to be terse :]. not sure what you mean. the warning pointed out originally did not come directly from us, nor do/did we have any way of controlling it other than using a newer version of autoconf ... -mike [-- Attachment #1.2: This is a digitally signed message part. --] [-- Type: application/pgp-signature, Size: 836 bytes --] [-- Attachment #2: Type: text/plain, Size: 354 bytes --] ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july [-- Attachment #3: Type: text/plain, Size: 155 bytes --] _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [LTP] Got warning message on ltp-full-20091031 while running ./configure 2009-11-09 20:19 ` Mike Frysinger @ 2009-11-10 7:18 ` Garrett Cooper 0 siblings, 0 replies; 10+ messages in thread From: Garrett Cooper @ 2009-11-10 7:18 UTC (permalink / raw) To: Mike Frysinger; +Cc: ltp-list On Mon, Nov 9, 2009 at 12:19 PM, Mike Frysinger <vapier@gentoo.org> wrote: > On Monday 09 November 2009 14:55:54 Garrett Cooper wrote: >> On Mon, Nov 9, 2009 at 11:22 AM, Mike Frysinger wrote: >> > well, the configure script wasnt really broken before. people just cant >> > handle any sort of warning message and reading the related log files can >> > be too much. >> >> I think we're kind of at fault for not having AC_MSG_INFO instead >> of AC_MSG_WARN, but oh well... AC_MSG_WARN is designed to be terse :]. > > not sure what you mean. the warning pointed out originally did not come > directly from us, nor do/did we have any way of controlling it other than > using a newer version of autoconf ... Oooooh... ok, Now it all makes sense. -Garrett ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Ltp-list mailing list Ltp-list@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ltp-list ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-11-10 7:19 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <1257220567.10382.3.camel@munipradeep-laptop> [not found] ` <1257221513.11048.1.camel@munipradeep-laptop> 2009-11-03 8:46 ` [LTP] [Ltp-results] Got warning message on ltp-full-20091031 while running ./configure Subrata Modak 2009-11-03 13:01 ` Garrett Cooper 2009-11-03 15:50 ` Mike Frysinger 2009-11-03 16:05 ` Garrett Cooper 2009-11-03 16:30 ` Mike Frysinger 2009-11-09 17:39 ` [LTP] " Subrata Modak 2009-11-09 19:22 ` Mike Frysinger 2009-11-09 19:55 ` Garrett Cooper 2009-11-09 20:19 ` Mike Frysinger 2009-11-10 7:18 ` Garrett Cooper
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.