[PATCH 0/11] ahci: Add support for non-PCI devices

[PATCH 0/11] ahci: Add support for non-PCI devices

[Anton Vorontsov]

On Wed, Mar 03, 2010 at 08:40:30AM -0500, Jeff Garzik wrote:
[...]
> Well, the general idea is to have a kernel module libahci.ko, upon
> which ahci.ko, mv-ahci.ko, acard-ahci.ko and platform-ahci.ko
> depends.

Yep, that's exactly the purpose of my patches.

> That would imply a bunch of exports, when the library code
> is moved from ahci.c to libahci.c, because libahci should be a
> separate kernel module.

Yep. Though, I don't bother with exporting symbols that neither
ahci (PCI driver) nor platform driver need. Later we might export
some more for mv/acard-ahci...

> I'm not overly picky about file naming.  However, in existing
> installations, people, scripts, knowledgebase articles and
> configuration files expect "ahci" to be the driver for PCI AHCI
> devices.  We don't want to break that if we can avoid it.  Simply
> using a different name avoids any breakage related to name changes.

OK. So in these series:

- I kept PCI driver in ahci.c (built as ahci.ko);
- Moved generic code into libahci.{c,h} (built as libahci.ko)

Also in these series:

- Rebased on top of linux-next (the patches also apply onto the
  current Linus' git tree, fwiw).
- Dropped sparse fixes patch, as the issue appears to be already
  fixed in linux-next.
- Addressed Sergei's comments on ahci_platform driver.

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2

[PATCH 01/11] ahci: Get rid of host->iomap usage

[Anton Vorontsov]

Currently the driver uses host->iomap to store all the iomapped BARs
of a PCI device (while AHCI devices actually use just a single memory
window).

We're going to teach AHCI to work with non-PCI buses, so there are two
options to make this work:

1. "fake" host->iomap array for non-PCI devices, and place the needed
   address at iomap[AHCI_PCI_BAR];
2. Get rid of host->iomap usage, instead introduce a private mmio
   field.

This patch implements the second option.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   34 ++++++++++++++++++++--------------
 1 files changed, 20 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6bd930b..fcf00ca 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -294,6 +294,7 @@ struct ahci_em_priv {
 };
 
 struct ahci_host_priv {
+	void __iomem *		mmio;		/* bus-independant mem map */
 	unsigned int		flags;		/* AHCI_HFLAG_* */
 	u32			cap;		/* cap to use */
 	u32			cap2;		/* cap2 to use */
@@ -744,7 +745,8 @@ static inline int ahci_nr_ports(u32 cap)
 static inline void __iomem *__ahci_port_base(struct ata_host *host,
 					     unsigned int port_no)
 {
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
 
 	return mmio + 0x100 + (port_no * 0x80);
 }
@@ -804,7 +806,8 @@ static ssize_t ahci_show_host_version(struct device *dev,
 {
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct ata_port *ap = ata_shost_to_port(shost);
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *mmio = hpriv->mmio;
 
 	return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
 }
@@ -837,7 +840,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
 static void ahci_save_initial_config(struct pci_dev *pdev,
 				     struct ahci_host_priv *hpriv)
 {
-	void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 	u32 cap, cap2, vers, port_map;
 	int i;
 	int mv;
@@ -966,7 +969,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 static void ahci_restore_initial_config(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 
 	writel(hpriv->saved_cap, mmio + HOST_CAP);
 	if (hpriv->saved_cap2)
@@ -1325,7 +1328,7 @@ static int ahci_reset_controller(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 	u32 tmp;
 
 	/* we must be in AHCI mode, before using anything
@@ -1456,7 +1459,8 @@ static void ahci_init_sw_activity(struct ata_link *link)
 
 static int ahci_reset_em(struct ata_host *host)
 {
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
 	u32 em_ctl;
 
 	em_ctl = readl(mmio + HOST_EM_CTL);
@@ -1472,7 +1476,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 {
 	struct ahci_host_priv *hpriv = ap->host->private_data;
 	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 	u32 em_ctl;
 	u32 message[] = {0, 0};
 	unsigned long flags;
@@ -1640,7 +1644,7 @@ static void ahci_init_controller(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct pci_dev *pdev = to_pci_dev(host->dev);
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 	int i;
 	void __iomem *port_mmio;
 	u32 tmp;
@@ -2348,7 +2352,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
 	VPRINTK("ENTER\n");
 
 	hpriv = host->private_data;
-	mmio = host->iomap[AHCI_PCI_BAR];
+	mmio = hpriv->mmio;
 
 	/* sigh.  0xffffffff is a valid return from h/w */
 	irq_stat = readl(mmio + HOST_IRQ_STAT);
@@ -2449,7 +2453,8 @@ static void ahci_freeze(struct ata_port *ap)
 
 static void ahci_thaw(struct ata_port *ap)
 {
-	void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *mmio = hpriv->mmio;
 	void __iomem *port_mmio = ahci_port_base(ap);
 	u32 tmp;
 	struct ahci_port_priv *pp = ap->private_data;
@@ -2614,7 +2619,7 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 	u32 ctl;
 
 	if (mesg.event & PM_EVENT_SUSPEND &&
@@ -2783,7 +2788,7 @@ static void ahci_print_info(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
 	struct pci_dev *pdev = to_pci_dev(host->dev);
-	void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+	void __iomem *mmio = hpriv->mmio;
 	u32 vers, cap, cap2, impl, speed;
 	const char *speed_s;
 	u16 cc;
@@ -3269,6 +3274,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
+	hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+
 	/* save initial config */
 	ahci_save_initial_config(pdev, hpriv);
 
@@ -3289,7 +3296,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
 		u8 messages;
-		void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+		void __iomem *mmio = hpriv->mmio;
 		u32 em_loc = readl(mmio + HOST_EM_LOC);
 		u32 em_ctl = readl(mmio + HOST_EM_CTL);
 
@@ -3333,7 +3340,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	if (!host)
 		return -ENOMEM;
-	host->iomap = pcim_iomap_table(pdev);
 	host->private_data = hpriv;
 
 	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
-- 
1.7.0

[PATCH 02/11] ahci: Factor out PCI specifics from ahci_save_initial_config()

[Anton Vorontsov]

Make ahci_save_initial_config() a bit more generic by introducing
force_port_map and mask_port_map arguments.

Move PCI stuff into ahci_pci_save_initial_config().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   66 +++++++++++++++++++++++++++++++++-------------------
 1 files changed, 42 insertions(+), 24 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index fcf00ca..98c9c6a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -826,6 +826,8 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *	ahci_save_initial_config - Save and fixup initial config values
  *	@pdev: target PCI device
  *	@hpriv: host private area to store config values
+ *	@force_port_map: force port map to a specified value
+ *	@mask_port_map: mask out particular bits from port map
  *
  *	Some registers containing configuration info might be setup by
  *	BIOS and might be cleared on reset.  This function saves the
@@ -838,12 +840,13 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *	None.
  */
 static void ahci_save_initial_config(struct pci_dev *pdev,
-				     struct ahci_host_priv *hpriv)
+				     struct ahci_host_priv *hpriv,
+				     unsigned int force_port_map,
+				     unsigned int mask_port_map)
 {
 	void __iomem *mmio = hpriv->mmio;
 	u32 cap, cap2, vers, port_map;
 	int i;
-	int mv;
 
 	/* make sure AHCI mode is enabled before accessing CAP */
 	ahci_enable_ahci(mmio);
@@ -893,32 +896,19 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 		cap &= ~HOST_CAP_SNTF;
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
-	    port_map != 1) {
+	if (force_port_map && port_map != force_port_map) {
 		dev_printk(KERN_INFO, &pdev->dev,
-			   "JMB361 has only one port, port_map 0x%x -> 0x%x\n",
-			   port_map, 1);
-		port_map = 1;
+			   "forcing port_map 0x%x -> 0x%x\n",
+			   port_map, force_port_map);
+		port_map = force_port_map;
 	}
 
-	/*
-	 * Temporary Marvell 6145 hack: PATA port presence
-	 * is asserted through the standard AHCI port
-	 * presence register, as bit 4 (counting from 0)
-	 */
-	if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
-		if (pdev->device == 0x6121)
-			mv = 0x3;
-		else
-			mv = 0xf;
+	if (mask_port_map) {
 		dev_printk(KERN_ERR, &pdev->dev,
-			   "MV_AHCI HACK: port_map %x -> %x\n",
+			   "masking port_map 0x%x -> 0x%x\n",
 			   port_map,
-			   port_map & mv);
-		dev_printk(KERN_ERR, &pdev->dev,
-			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
-
-		port_map &= mv;
+			   port_map & mask_port_map);
+		port_map &= mask_port_map;
 	}
 
 	/* cross check port_map and cap.n_ports */
@@ -957,6 +947,34 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	hpriv->port_map = port_map;
 }
 
+static void ahci_pci_save_initial_config(struct pci_dev *pdev,
+					 struct ahci_host_priv *hpriv)
+{
+	unsigned int force_port_map = 0;
+	unsigned int mask_port_map = 0;
+
+	if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
+		dev_info(&pdev->dev, "JMB361 has only one port\n");
+		force_port_map = 1;
+	}
+
+	/*
+	 * Temporary Marvell 6145 hack: PATA port presence
+	 * is asserted through the standard AHCI port
+	 * presence register, as bit 4 (counting from 0)
+	 */
+	if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
+		if (pdev->device == 0x6121)
+			mask_port_map = 0x3;
+		else
+			mask_port_map = 0xf;
+		dev_info(&pdev->dev,
+			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
+	}
+
+	ahci_save_initial_config(pdev, hpriv, force_port_map, mask_port_map);
+}
+
 /**
  *	ahci_restore_initial_config - Restore initial config
  *	@host: target ATA host
@@ -3277,7 +3295,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
 
 	/* save initial config */
-	ahci_save_initial_config(pdev, hpriv);
+	ahci_pci_save_initial_config(pdev, hpriv);
 
 	/* prepare host */
 	if (hpriv->cap & HOST_CAP_NCQ) {
-- 
1.7.0

[PATCH 03/11] ahci: Get rid of pci_dev argument in ahci_save_initial_config()

[Anton Vorontsov]

To make the function generic we have to get rid of "struct pci_dev *",
so let's pass just a "struct devce *".

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   27 +++++++++++++--------------
 1 files changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 98c9c6a..9d9af3c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -824,7 +824,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
 
 /**
  *	ahci_save_initial_config - Save and fixup initial config values
- *	@pdev: target PCI device
+ *	@dev: target AHCI device
  *	@hpriv: host private area to store config values
  *	@force_port_map: force port map to a specified value
  *	@mask_port_map: mask out particular bits from port map
@@ -839,7 +839,7 @@ static ssize_t ahci_show_port_cmd(struct device *dev,
  *	LOCKING:
  *	None.
  */
-static void ahci_save_initial_config(struct pci_dev *pdev,
+static void ahci_save_initial_config(struct device *dev,
 				     struct ahci_host_priv *hpriv,
 				     unsigned int force_port_map,
 				     unsigned int mask_port_map)
@@ -867,45 +867,43 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 
 	/* some chips have errata preventing 64bit use */
 	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do 64bit DMA, forcing 32bit\n");
 		cap &= ~HOST_CAP_64;
 	}
 
 	if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do NCQ, turning off CAP_NCQ\n");
 		cap &= ~HOST_CAP_NCQ;
 	}
 
 	if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can do NCQ, turning on CAP_NCQ\n");
 		cap |= HOST_CAP_NCQ;
 	}
 
 	if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do PMP, turning off CAP_PMP\n");
 		cap &= ~HOST_CAP_PMP;
 	}
 
 	if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
-		dev_printk(KERN_INFO, &pdev->dev,
+		dev_printk(KERN_INFO, dev,
 			   "controller can't do SNTF, turning off CAP_SNTF\n");
 		cap &= ~HOST_CAP_SNTF;
 	}
 
 	if (force_port_map && port_map != force_port_map) {
-		dev_printk(KERN_INFO, &pdev->dev,
-			   "forcing port_map 0x%x -> 0x%x\n",
+		dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
 			   port_map, force_port_map);
 		port_map = force_port_map;
 	}
 
 	if (mask_port_map) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "masking port_map 0x%x -> 0x%x\n",
+		dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
 			   port_map,
 			   port_map & mask_port_map);
 		port_map &= mask_port_map;
@@ -923,7 +921,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 		 * port_map and let it be generated from n_ports.
 		 */
 		if (map_ports > ahci_nr_ports(cap)) {
-			dev_printk(KERN_WARNING, &pdev->dev,
+			dev_printk(KERN_WARNING, dev,
 				   "implemented port map (0x%x) contains more "
 				   "ports than nr_ports (%u), using nr_ports\n",
 				   port_map, ahci_nr_ports(cap));
@@ -934,7 +932,7 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 	/* fabricate port_map from cap.nr_ports */
 	if (!port_map) {
 		port_map = (1 << ahci_nr_ports(cap)) - 1;
-		dev_printk(KERN_WARNING, &pdev->dev,
+		dev_printk(KERN_WARNING, dev,
 			   "forcing PORTS_IMPL to 0x%x\n", port_map);
 
 		/* write the fixed up value to the PI register */
@@ -972,7 +970,8 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 	}
 
-	ahci_save_initial_config(pdev, hpriv, force_port_map, mask_port_map);
+	ahci_save_initial_config(&pdev->dev, hpriv, force_port_map,
+				 mask_port_map);
 }
 
 /**
-- 
1.7.0

[PATCH 04/11] ahci: Factor out PCI specifics from ahci_reset_controller()

[Anton Vorontsov]

Move PCI stuff into ahci_pci_reset_controller().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   15 ++++++++++++---
 1 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9d9af3c..830a6fe 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1343,7 +1343,6 @@ static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
 
 static int ahci_reset_controller(struct ata_host *host)
 {
-	struct pci_dev *pdev = to_pci_dev(host->dev);
 	struct ahci_host_priv *hpriv = host->private_data;
 	void __iomem *mmio = hpriv->mmio;
 	u32 tmp;
@@ -1387,7 +1386,17 @@ static int ahci_reset_controller(struct ata_host *host)
 		dev_printk(KERN_INFO, host->dev,
 			   "skipping global host reset\n");
 
+	return 0;
+}
+
+static int ahci_pci_reset_controller(struct ata_host *host)
+{
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+
+	ahci_reset_controller(host);
+
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		struct ahci_host_priv *hpriv = host->private_data;
 		u16 tmp16;
 
 		/* configure PCS */
@@ -2670,7 +2679,7 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 		return rc;
 
 	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
-		rc = ahci_reset_controller(host);
+		rc = ahci_pci_reset_controller(host);
 		if (rc)
 			return rc;
 
@@ -3398,7 +3407,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	rc = ahci_reset_controller(host);
+	rc = ahci_pci_reset_controller(host);
 	if (rc)
 		return rc;
 
-- 
1.7.0

[PATCH 05/11] ahci: Get rid of pci_dev argument in ahci_port_init()

[Anton Vorontsov]

To make the function bus-independand we have to get rid of
"struct pci_dev *", so let's pass just "struct devce *".

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 830a6fe..b646364 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1638,7 +1638,7 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
 	return sprintf(buf, "%d\n", emp->blink_policy);
 }
 
-static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
+static void ahci_port_init(struct device *dev, struct ata_port *ap,
 			   int port_no, void __iomem *mmio,
 			   void __iomem *port_mmio)
 {
@@ -1649,8 +1649,7 @@ static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
 	/* make sure port is not active */
 	rc = ahci_deinit_port(ap, &emsg);
 	if (rc)
-		dev_printk(KERN_WARNING, &pdev->dev,
-			   "%s (%d)\n", emsg, rc);
+		dev_warn(dev, "%s (%d)\n", emsg, rc);
 
 	/* clear SError */
 	tmp = readl(port_mmio + PORT_SCR_ERR);
@@ -1699,7 +1698,7 @@ static void ahci_init_controller(struct ata_host *host)
 		if (ata_port_is_dummy(ap))
 			continue;
 
-		ahci_port_init(pdev, ap, i, mmio, port_mmio);
+		ahci_port_init(host->dev, ap, i, mmio, port_mmio);
 	}
 
 	tmp = readl(mmio + HOST_CTL);
-- 
1.7.0

[PATCH 06/11] ahci: Factor out PCI specifics from ahci_init_controller()

[Anton Vorontsov]

Move PCI stuff into ahci_pci_init_controller().

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   45 +++++++++++++++++++++++++++------------------
 1 files changed, 27 insertions(+), 18 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index b646364..439ff90 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1668,11 +1668,34 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap,
 static void ahci_init_controller(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
-	struct pci_dev *pdev = to_pci_dev(host->dev);
 	void __iomem *mmio = hpriv->mmio;
 	int i;
 	void __iomem *port_mmio;
 	u32 tmp;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		port_mmio = ahci_port_base(ap);
+		if (ata_port_is_dummy(ap))
+			continue;
+
+		ahci_port_init(host->dev, ap, i, mmio, port_mmio);
+	}
+
+	tmp = readl(mmio + HOST_CTL);
+	VPRINTK("HOST_CTL 0x%x\n", tmp);
+	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+	tmp = readl(mmio + HOST_CTL);
+	VPRINTK("HOST_CTL 0x%x\n", tmp);
+}
+
+static void ahci_pci_init_controller(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	void __iomem *port_mmio;
+	u32 tmp;
 	int mv;
 
 	if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
@@ -1691,21 +1714,7 @@ static void ahci_init_controller(struct ata_host *host)
 			writel(tmp, port_mmio + PORT_IRQ_STAT);
 	}
 
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		port_mmio = ahci_port_base(ap);
-		if (ata_port_is_dummy(ap))
-			continue;
-
-		ahci_port_init(host->dev, ap, i, mmio, port_mmio);
-	}
-
-	tmp = readl(mmio + HOST_CTL);
-	VPRINTK("HOST_CTL 0x%x\n", tmp);
-	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
-	tmp = readl(mmio + HOST_CTL);
-	VPRINTK("HOST_CTL 0x%x\n", tmp);
+	ahci_init_controller(host);
 }
 
 static void ahci_dev_config(struct ata_device *dev)
@@ -2682,7 +2691,7 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 		if (rc)
 			return rc;
 
-		ahci_init_controller(host);
+		ahci_pci_init_controller(host);
 	}
 
 	ata_host_resume(host);
@@ -3410,7 +3419,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	ahci_init_controller(host);
+	ahci_pci_init_controller(host);
 	ahci_print_info(host);
 
 	pci_set_master(pdev);
-- 
1.7.0

[PATCH 07/11] ahci: Factor out PCI specifics from ahci_print_info()

[Anton Vorontsov]

Introduce ahci_pci_print_info() that now handles PCI stuff.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   40 +++++++++++++++++++++++-----------------
 1 files changed, 23 insertions(+), 17 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 439ff90..f904683 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2818,15 +2818,12 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 	return 0;
 }
 
-static void ahci_print_info(struct ata_host *host)
+static void ahci_print_info(struct ata_host *host, const char *scc_s)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
-	struct pci_dev *pdev = to_pci_dev(host->dev);
 	void __iomem *mmio = hpriv->mmio;
 	u32 vers, cap, cap2, impl, speed;
 	const char *speed_s;
-	u16 cc;
-	const char *scc_s;
 
 	vers = readl(mmio + HOST_VERSION);
 	cap = hpriv->cap;
@@ -2843,17 +2840,7 @@ static void ahci_print_info(struct ata_host *host)
 	else
 		speed_s = "?";
 
-	pci_read_config_word(pdev, 0x0a, &cc);
-	if (cc == PCI_CLASS_STORAGE_IDE)
-		scc_s = "IDE";
-	else if (cc == PCI_CLASS_STORAGE_SATA)
-		scc_s = "SATA";
-	else if (cc == PCI_CLASS_STORAGE_RAID)
-		scc_s = "RAID";
-	else
-		scc_s = "unknown";
-
-	dev_printk(KERN_INFO, &pdev->dev,
+	dev_info(host->dev,
 		"AHCI %02x%02x.%02x%02x "
 		"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
 		,
@@ -2869,7 +2856,7 @@ static void ahci_print_info(struct ata_host *host)
 		impl,
 		scc_s);
 
-	dev_printk(KERN_INFO, &pdev->dev,
+	dev_info(host->dev,
 		"flags: "
 		"%s%s%s%s%s%s%s"
 		"%s%s%s%s%s%s%s"
@@ -2899,6 +2886,25 @@ static void ahci_print_info(struct ata_host *host)
 		);
 }
 
+static void ahci_pci_print_info(struct ata_host *host)
+{
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	u16 cc;
+	const char *scc_s;
+
+	pci_read_config_word(pdev, 0x0a, &cc);
+	if (cc == PCI_CLASS_STORAGE_IDE)
+		scc_s = "IDE";
+	else if (cc == PCI_CLASS_STORAGE_SATA)
+		scc_s = "SATA";
+	else if (cc == PCI_CLASS_STORAGE_RAID)
+		scc_s = "RAID";
+	else
+		scc_s = "unknown";
+
+	ahci_print_info(host, scc_s);
+}
+
 /* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
  * hardwired to on-board SIMG 4726.  The chipset is ICH8 and doesn't
  * support PMP and the 4726 either directly exports the device
@@ -3420,7 +3426,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 
 	ahci_pci_init_controller(host);
-	ahci_print_info(host);
+	ahci_pci_print_info(host);
 
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
-- 
1.7.0

[PATCH 08/11] ahci: Introduce ahci_set_em_messages()

[Anton Vorontsov]

Factor out some ahci_em_messages handling code from ahci_init_one().
We would like to reuse it for non-PCI devices.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/ahci.c |   41 ++++++++++++++++++++++++-----------------
 1 files changed, 24 insertions(+), 17 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f904683..4f05cf0 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -3231,6 +3231,29 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 {}
 #endif
 
+static void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+				 struct ata_port_info *pi)
+{
+	u8 messages;
+	void __iomem *mmio = hpriv->mmio;
+	u32 em_loc = readl(mmio + HOST_EM_LOC);
+	u32 em_ctl = readl(mmio + HOST_EM_CTL);
+
+	if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS))
+		return;
+
+	messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
+
+	/* we only support LED message type right now */
+	if ((messages & 0x01) && (ahci_em_messages == 1)) {
+		/* store em_loc */
+		hpriv->em_loc = ((em_loc >> 16) * 4);
+		pi->flags |= ATA_FLAG_EM;
+		if (!(em_ctl & EM_CTL_ALHD))
+			pi->flags |= ATA_FLAG_SW_ACTIVITY;
+	}
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
@@ -3334,23 +3357,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (hpriv->cap & HOST_CAP_PMP)
 		pi.flags |= ATA_FLAG_PMP;
 
-	if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
-		u8 messages;
-		void __iomem *mmio = hpriv->mmio;
-		u32 em_loc = readl(mmio + HOST_EM_LOC);
-		u32 em_ctl = readl(mmio + HOST_EM_CTL);
-
-		messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
-
-		/* we only support LED message type right now */
-		if ((messages & 0x01) && (ahci_em_messages == 1)) {
-			/* store em_loc */
-			hpriv->em_loc = ((em_loc >> 16) * 4);
-			pi.flags |= ATA_FLAG_EM;
-			if (!(em_ctl & EM_CTL_ALHD))
-				pi.flags |= ATA_FLAG_SW_ACTIVITY;
-		}
-	}
+	ahci_set_em_messages(hpriv, &pi);
 
 	if (ahci_broken_system_poweroff(pdev)) {
 		pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
-- 
1.7.0

[PATCH 09/11] ahci: Move generic code into libahci

[Anton Vorontsov]

This patch should contain no functional changes, just moves code
around.

Currently libahci.c and ahci.c are built into a single module,
so there is no need for EXPORT_SYMBOL_GPL()s, yet. Exports will be
added in a subsequent patch.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/Makefile  |    2 +-
 drivers/ata/ahci.c    | 2271 +------------------------------------------------
 drivers/ata/libahci.c | 2059 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/ata/libahci.h |  330 +++++++
 4 files changed, 2391 insertions(+), 2271 deletions(-)
 create mode 100644 drivers/ata/libahci.c
 create mode 100644 drivers/ata/libahci.h

diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index b7d4923..75e3abd 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,7 +1,7 @@
 
 obj-$(CONFIG_ATA)		+= libata.o
 
-obj-$(CONFIG_SATA_AHCI)		+= ahci.o
+obj-$(CONFIG_SATA_AHCI)		+= libahci.o ahci.o
 obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
 obj-$(CONFIG_ATA_PIIX)		+= ata_piix.o
 obj-$(CONFIG_SATA_PROMISE)	+= sata_promise.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 4f05cf0..93ad408 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -45,67 +45,13 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/libata.h>
+#include "libahci.h"
 
 #define DRV_NAME	"ahci"
 #define DRV_VERSION	"3.0"
 
-/* Enclosure Management Control */
-#define EM_CTRL_MSG_TYPE              0x000f0000
-
-/* Enclosure Management LED Message Type */
-#define EM_MSG_LED_HBA_PORT           0x0000000f
-#define EM_MSG_LED_PMP_SLOT           0x0000ff00
-#define EM_MSG_LED_VALUE              0xffff0000
-#define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
-#define EM_MSG_LED_VALUE_OFF          0xfff80000
-#define EM_MSG_LED_VALUE_ON           0x00010000
-
-static int ahci_skip_host_reset;
-static int ahci_ignore_sss;
-
-module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
-MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
-
-module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
-MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
-
-static int ahci_enable_alpm(struct ata_port *ap,
-		enum link_pm policy);
-static void ahci_disable_alpm(struct ata_port *ap);
-static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
-static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
-			      size_t size);
-static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
-					ssize_t size);
-
 enum {
 	AHCI_PCI_BAR		= 5,
-	AHCI_MAX_PORTS		= 32,
-	AHCI_MAX_SG		= 168, /* hardware max is 64K */
-	AHCI_DMA_BOUNDARY	= 0xffffffff,
-	AHCI_MAX_CMDS		= 32,
-	AHCI_CMD_SZ		= 32,
-	AHCI_CMD_SLOT_SZ	= AHCI_MAX_CMDS * AHCI_CMD_SZ,
-	AHCI_RX_FIS_SZ		= 256,
-	AHCI_CMD_TBL_CDB	= 0x40,
-	AHCI_CMD_TBL_HDR_SZ	= 0x80,
-	AHCI_CMD_TBL_SZ		= AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
-	AHCI_CMD_TBL_AR_SZ	= AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
-	AHCI_PORT_PRIV_DMA_SZ	= AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
-				  AHCI_RX_FIS_SZ,
-	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
-					  AHCI_CMD_TBL_AR_SZ +
-					  (AHCI_RX_FIS_SZ * 16),
-	AHCI_IRQ_ON_SG		= (1 << 31),
-	AHCI_CMD_ATAPI		= (1 << 5),
-	AHCI_CMD_WRITE		= (1 << 6),
-	AHCI_CMD_PREFETCH	= (1 << 7),
-	AHCI_CMD_RESET		= (1 << 8),
-	AHCI_CMD_CLR_BUSY	= (1 << 10),
-
-	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
-	RX_FIS_SDB		= 0x58, /* offset of SDB FIS data */
-	RX_FIS_UNK		= 0x60, /* offset of Unknown FIS data */
 
 	board_ahci		= 0,
 	board_ahci_vt8251	= 1,
@@ -117,332 +63,19 @@ enum {
 	board_ahci_nopmp	= 7,
 	board_ahci_yesncq	= 8,
 	board_ahci_nosntf	= 9,
-
-	/* global controller registers */
-	HOST_CAP		= 0x00, /* host capabilities */
-	HOST_CTL		= 0x04, /* global host control */
-	HOST_IRQ_STAT		= 0x08, /* interrupt status */
-	HOST_PORTS_IMPL		= 0x0c, /* bitmap of implemented ports */
-	HOST_VERSION		= 0x10, /* AHCI spec. version compliancy */
-	HOST_EM_LOC		= 0x1c, /* Enclosure Management location */
-	HOST_EM_CTL		= 0x20, /* Enclosure Management Control */
-	HOST_CAP2		= 0x24, /* host capabilities, extended */
-
-	/* HOST_CTL bits */
-	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
-	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
-	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
-
-	/* HOST_CAP bits */
-	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
-	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
-	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
-	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
-	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
-	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
-	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
-	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
-	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
-	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
-	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
-	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
-	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
-	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
-	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
-	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
-	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
-
-	/* HOST_CAP2 bits */
-	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
-	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
-	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
-
-	/* registers for each SATA port */
-	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
-	PORT_LST_ADDR_HI	= 0x04, /* command list DMA addr hi */
-	PORT_FIS_ADDR		= 0x08, /* FIS rx buf addr */
-	PORT_FIS_ADDR_HI	= 0x0c, /* FIS rx buf addr hi */
-	PORT_IRQ_STAT		= 0x10, /* interrupt status */
-	PORT_IRQ_MASK		= 0x14, /* interrupt enable/disable mask */
-	PORT_CMD		= 0x18, /* port command */
-	PORT_TFDATA		= 0x20,	/* taskfile data */
-	PORT_SIG		= 0x24,	/* device TF signature */
-	PORT_CMD_ISSUE		= 0x38, /* command issue */
-	PORT_SCR_STAT		= 0x28, /* SATA phy register: SStatus */
-	PORT_SCR_CTL		= 0x2c, /* SATA phy register: SControl */
-	PORT_SCR_ERR		= 0x30, /* SATA phy register: SError */
-	PORT_SCR_ACT		= 0x34, /* SATA phy register: SActive */
-	PORT_SCR_NTF		= 0x3c, /* SATA phy register: SNotification */
-	PORT_FBS		= 0x40, /* FIS-based Switching */
-
-	/* PORT_IRQ_{STAT,MASK} bits */
-	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
-	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
-	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
-	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
-	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
-	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
-	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
-	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
-
-	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
-	PORT_IRQ_DEV_ILCK	= (1 << 7), /* device interlock */
-	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
-	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
-	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
-	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
-	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
-	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
-	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
-
-	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
-				  PORT_IRQ_IF_ERR |
-				  PORT_IRQ_CONNECT |
-				  PORT_IRQ_PHYRDY |
-				  PORT_IRQ_UNK_FIS |
-				  PORT_IRQ_BAD_PMP,
-	PORT_IRQ_ERROR		= PORT_IRQ_FREEZE |
-				  PORT_IRQ_TF_ERR |
-				  PORT_IRQ_HBUS_DATA_ERR,
-	DEF_PORT_IRQ		= PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
-				  PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
-				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-
-	/* PORT_CMD bits */
-	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
-	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
-	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
-	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
-	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
-	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
-	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
-	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
-	PORT_CMD_CLO		= (1 << 3), /* Command list override */
-	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
-	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
-	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
-
-	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
-	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
-	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
-	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
-
-	PORT_FBS_DWE_OFFSET	= 16, /* FBS device with error offset */
-	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
-	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
-	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
-	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
-	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
-	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
-
-	/* hpriv->flags bits */
-	AHCI_HFLAG_NO_NCQ		= (1 << 0),
-	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
-	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
-	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
-	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
-	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
-	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
-	AHCI_HFLAG_NO_HOTPLUG		= (1 << 7), /* ignore PxSERR.DIAG.N */
-	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
-	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
-	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
-	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
-							link offline */
-	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
-
-	/* ap->flags bits */
-
-	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
-					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
-					  ATA_FLAG_IPM,
-
-	ICH_MAP				= 0x90, /* ICH MAP register */
-
-	/* em constants */
-	EM_MAX_SLOTS			= 8,
-	EM_MAX_RETRY			= 5,
-
-	/* em_ctl bits */
-	EM_CTL_RST			= (1 << 9), /* Reset */
-	EM_CTL_TM			= (1 << 8), /* Transmit Message */
-	EM_CTL_ALHD			= (1 << 26), /* Activity LED */
-};
-
-struct ahci_cmd_hdr {
-	__le32			opts;
-	__le32			status;
-	__le32			tbl_addr;
-	__le32			tbl_addr_hi;
-	__le32			reserved[4];
-};
-
-struct ahci_sg {
-	__le32			addr;
-	__le32			addr_hi;
-	__le32			reserved;
-	__le32			flags_size;
-};
-
-struct ahci_em_priv {
-	enum sw_activity blink_policy;
-	struct timer_list timer;
-	unsigned long saved_activity;
-	unsigned long activity;
-	unsigned long led_state;
 };
 
-struct ahci_host_priv {
-	void __iomem *		mmio;		/* bus-independant mem map */
-	unsigned int		flags;		/* AHCI_HFLAG_* */
-	u32			cap;		/* cap to use */
-	u32			cap2;		/* cap2 to use */
-	u32			port_map;	/* port map to use */
-	u32			saved_cap;	/* saved initial cap */
-	u32			saved_cap2;	/* saved initial cap2 */
-	u32			saved_port_map;	/* saved initial port_map */
-	u32 			em_loc; /* enclosure management location */
-};
-
-struct ahci_port_priv {
-	struct ata_link		*active_link;
-	struct ahci_cmd_hdr	*cmd_slot;
-	dma_addr_t		cmd_slot_dma;
-	void			*cmd_tbl;
-	dma_addr_t		cmd_tbl_dma;
-	void			*rx_fis;
-	dma_addr_t		rx_fis_dma;
-	/* for NCQ spurious interrupt analysis */
-	unsigned int		ncq_saw_d2h:1;
-	unsigned int		ncq_saw_dmas:1;
-	unsigned int		ncq_saw_sdb:1;
-	u32 			intr_mask;	/* interrupts to enable */
-	bool			fbs_supported;	/* set iff FBS is supported */
-	bool			fbs_enabled;	/* set iff FBS is enabled */
-	int			fbs_last_dev;	/* save FBS.DEV of last FIS */
-	/* enclosure management info per PM slot */
-	struct ahci_em_priv	em_priv[EM_MAX_SLOTS];
-};
-
-static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
-static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
-static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
-static int ahci_port_start(struct ata_port *ap);
-static void ahci_port_stop(struct ata_port *ap);
-static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
-static void ahci_qc_prep(struct ata_queued_cmd *qc);
-static void ahci_freeze(struct ata_port *ap);
-static void ahci_thaw(struct ata_port *ap);
-static void ahci_enable_fbs(struct ata_port *ap);
-static void ahci_disable_fbs(struct ata_port *ap);
-static void ahci_pmp_attach(struct ata_port *ap);
-static void ahci_pmp_detach(struct ata_port *ap);
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
-			  unsigned long deadline);
 static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
 			  unsigned long deadline);
-static int ahci_hardreset(struct ata_link *link, unsigned int *class,
-			  unsigned long deadline);
 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 				 unsigned long deadline);
 static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 				unsigned long deadline);
-static void ahci_postreset(struct ata_link *link, unsigned int *class);
-static void ahci_error_handler(struct ata_port *ap);
-static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
-static int ahci_port_resume(struct ata_port *ap);
-static void ahci_dev_config(struct ata_device *dev);
-static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
-			       u32 opts);
 #ifdef CONFIG_PM
-static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
 static int ahci_pci_device_resume(struct pci_dev *pdev);
 #endif
-static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
-static ssize_t ahci_activity_store(struct ata_device *dev,
-				   enum sw_activity val);
-static void ahci_init_sw_activity(struct ata_link *link);
-
-static ssize_t ahci_show_host_caps(struct device *dev,
-				   struct device_attribute *attr, char *buf);
-static ssize_t ahci_show_host_cap2(struct device *dev,
-				   struct device_attribute *attr, char *buf);
-static ssize_t ahci_show_host_version(struct device *dev,
-				      struct device_attribute *attr, char *buf);
-static ssize_t ahci_show_port_cmd(struct device *dev,
-				  struct device_attribute *attr, char *buf);
-
-static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
-static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
-static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
-static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
-
-static struct device_attribute *ahci_shost_attrs[] = {
-	&dev_attr_link_power_management_policy,
-	&dev_attr_em_message_type,
-	&dev_attr_em_message,
-	&dev_attr_ahci_host_caps,
-	&dev_attr_ahci_host_cap2,
-	&dev_attr_ahci_host_version,
-	&dev_attr_ahci_port_cmd,
-	NULL
-};
-
-static struct device_attribute *ahci_sdev_attrs[] = {
-	&dev_attr_sw_activity,
-	&dev_attr_unload_heads,
-	NULL
-};
-
-static struct scsi_host_template ahci_sht = {
-	ATA_NCQ_SHT(DRV_NAME),
-	.can_queue		= AHCI_MAX_CMDS - 1,
-	.sg_tablesize		= AHCI_MAX_SG,
-	.dma_boundary		= AHCI_DMA_BOUNDARY,
-	.shost_attrs		= ahci_shost_attrs,
-	.sdev_attrs		= ahci_sdev_attrs,
-};
-
-static struct ata_port_operations ahci_ops = {
-	.inherits		= &sata_pmp_port_ops,
-
-	.qc_defer		= ahci_pmp_qc_defer,
-	.qc_prep		= ahci_qc_prep,
-	.qc_issue		= ahci_qc_issue,
-	.qc_fill_rtf		= ahci_qc_fill_rtf,
-
-	.freeze			= ahci_freeze,
-	.thaw			= ahci_thaw,
-	.softreset		= ahci_softreset,
-	.hardreset		= ahci_hardreset,
-	.postreset		= ahci_postreset,
-	.pmp_softreset		= ahci_softreset,
-	.error_handler		= ahci_error_handler,
-	.post_internal_cmd	= ahci_post_internal_cmd,
-	.dev_config		= ahci_dev_config,
-
-	.scr_read		= ahci_scr_read,
-	.scr_write		= ahci_scr_write,
-	.pmp_attach		= ahci_pmp_attach,
-	.pmp_detach		= ahci_pmp_detach,
-
-	.enable_pm		= ahci_enable_alpm,
-	.disable_pm		= ahci_disable_alpm,
-	.em_show		= ahci_led_show,
-	.em_store		= ahci_led_store,
-	.sw_activity_show	= ahci_activity_show,
-	.sw_activity_store	= ahci_activity_store,
-#ifdef CONFIG_PM
-	.port_suspend		= ahci_port_suspend,
-	.port_resume		= ahci_port_resume,
-#endif
-	.port_start		= ahci_port_start,
-	.port_stop		= ahci_port_stop,
-};
 
 static struct ata_port_operations ahci_vt8251_ops = {
 	.inherits		= &ahci_ops,
@@ -710,7 +343,6 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ }	/* terminate list */
 };
 
-
 static struct pci_driver ahci_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= ahci_pci_tbl,
@@ -722,12 +354,6 @@ static struct pci_driver ahci_pci_driver = {
 #endif
 };
 
-static int ahci_em_messages = 1;
-module_param(ahci_em_messages, int, 0444);
-/* add other LED protocol types when they become supported */
-MODULE_PARM_DESC(ahci_em_messages,
-	"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
-
 #if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
 static int marvell_enable;
 #else
@@ -736,215 +362,6 @@ static int marvell_enable = 1;
 module_param(marvell_enable, int, 0644);
 MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
 
-
-static inline int ahci_nr_ports(u32 cap)
-{
-	return (cap & 0x1f) + 1;
-}
-
-static inline void __iomem *__ahci_port_base(struct ata_host *host,
-					     unsigned int port_no)
-{
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-
-	return mmio + 0x100 + (port_no * 0x80);
-}
-
-static inline void __iomem *ahci_port_base(struct ata_port *ap)
-{
-	return __ahci_port_base(ap->host, ap->port_no);
-}
-
-static void ahci_enable_ahci(void __iomem *mmio)
-{
-	int i;
-	u32 tmp;
-
-	/* turn on AHCI_EN */
-	tmp = readl(mmio + HOST_CTL);
-	if (tmp & HOST_AHCI_EN)
-		return;
-
-	/* Some controllers need AHCI_EN to be written multiple times.
-	 * Try a few times before giving up.
-	 */
-	for (i = 0; i < 5; i++) {
-		tmp |= HOST_AHCI_EN;
-		writel(tmp, mmio + HOST_CTL);
-		tmp = readl(mmio + HOST_CTL);	/* flush && sanity check */
-		if (tmp & HOST_AHCI_EN)
-			return;
-		msleep(10);
-	}
-
-	WARN_ON(1);
-}
-
-static ssize_t ahci_show_host_caps(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-
-	return sprintf(buf, "%x\n", hpriv->cap);
-}
-
-static ssize_t ahci_show_host_cap2(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-
-	return sprintf(buf, "%x\n", hpriv->cap2);
-}
-
-static ssize_t ahci_show_host_version(struct device *dev,
-				   struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-
-	return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
-}
-
-static ssize_t ahci_show_port_cmd(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = class_to_shost(dev);
-	struct ata_port *ap = ata_shost_to_port(shost);
-	void __iomem *port_mmio = ahci_port_base(ap);
-
-	return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
-}
-
-/**
- *	ahci_save_initial_config - Save and fixup initial config values
- *	@dev: target AHCI device
- *	@hpriv: host private area to store config values
- *	@force_port_map: force port map to a specified value
- *	@mask_port_map: mask out particular bits from port map
- *
- *	Some registers containing configuration info might be setup by
- *	BIOS and might be cleared on reset.  This function saves the
- *	initial values of those registers into @hpriv such that they
- *	can be restored after controller reset.
- *
- *	If inconsistent, config values are fixed up by this function.
- *
- *	LOCKING:
- *	None.
- */
-static void ahci_save_initial_config(struct device *dev,
-				     struct ahci_host_priv *hpriv,
-				     unsigned int force_port_map,
-				     unsigned int mask_port_map)
-{
-	void __iomem *mmio = hpriv->mmio;
-	u32 cap, cap2, vers, port_map;
-	int i;
-
-	/* make sure AHCI mode is enabled before accessing CAP */
-	ahci_enable_ahci(mmio);
-
-	/* Values prefixed with saved_ are written back to host after
-	 * reset.  Values without are used for driver operation.
-	 */
-	hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
-	hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
-
-	/* CAP2 register is only defined for AHCI 1.2 and later */
-	vers = readl(mmio + HOST_VERSION);
-	if ((vers >> 16) > 1 ||
-	   ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
-		hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
-	else
-		hpriv->saved_cap2 = cap2 = 0;
-
-	/* some chips have errata preventing 64bit use */
-	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
-		dev_printk(KERN_INFO, dev,
-			   "controller can't do 64bit DMA, forcing 32bit\n");
-		cap &= ~HOST_CAP_64;
-	}
-
-	if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
-		dev_printk(KERN_INFO, dev,
-			   "controller can't do NCQ, turning off CAP_NCQ\n");
-		cap &= ~HOST_CAP_NCQ;
-	}
-
-	if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
-		dev_printk(KERN_INFO, dev,
-			   "controller can do NCQ, turning on CAP_NCQ\n");
-		cap |= HOST_CAP_NCQ;
-	}
-
-	if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
-		dev_printk(KERN_INFO, dev,
-			   "controller can't do PMP, turning off CAP_PMP\n");
-		cap &= ~HOST_CAP_PMP;
-	}
-
-	if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
-		dev_printk(KERN_INFO, dev,
-			   "controller can't do SNTF, turning off CAP_SNTF\n");
-		cap &= ~HOST_CAP_SNTF;
-	}
-
-	if (force_port_map && port_map != force_port_map) {
-		dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
-			   port_map, force_port_map);
-		port_map = force_port_map;
-	}
-
-	if (mask_port_map) {
-		dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
-			   port_map,
-			   port_map & mask_port_map);
-		port_map &= mask_port_map;
-	}
-
-	/* cross check port_map and cap.n_ports */
-	if (port_map) {
-		int map_ports = 0;
-
-		for (i = 0; i < AHCI_MAX_PORTS; i++)
-			if (port_map & (1 << i))
-				map_ports++;
-
-		/* If PI has more ports than n_ports, whine, clear
-		 * port_map and let it be generated from n_ports.
-		 */
-		if (map_ports > ahci_nr_ports(cap)) {
-			dev_printk(KERN_WARNING, dev,
-				   "implemented port map (0x%x) contains more "
-				   "ports than nr_ports (%u), using nr_ports\n",
-				   port_map, ahci_nr_ports(cap));
-			port_map = 0;
-		}
-	}
-
-	/* fabricate port_map from cap.nr_ports */
-	if (!port_map) {
-		port_map = (1 << ahci_nr_ports(cap)) - 1;
-		dev_printk(KERN_WARNING, dev,
-			   "forcing PORTS_IMPL to 0x%x\n", port_map);
-
-		/* write the fixed up value to the PI register */
-		hpriv->saved_port_map = port_map;
-	}
-
-	/* record values to use during operation */
-	hpriv->cap = cap;
-	hpriv->cap2 = cap2;
-	hpriv->port_map = port_map;
-}
-
 static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 					 struct ahci_host_priv *hpriv)
 {
@@ -974,421 +391,6 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev,
 				 mask_port_map);
 }
 
-/**
- *	ahci_restore_initial_config - Restore initial config
- *	@host: target ATA host
- *
- *	Restore initial config stored by ahci_save_initial_config().
- *
- *	LOCKING:
- *	None.
- */
-static void ahci_restore_initial_config(struct ata_host *host)
-{
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-
-	writel(hpriv->saved_cap, mmio + HOST_CAP);
-	if (hpriv->saved_cap2)
-		writel(hpriv->saved_cap2, mmio + HOST_CAP2);
-	writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
-	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
-}
-
-static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
-{
-	static const int offset[] = {
-		[SCR_STATUS]		= PORT_SCR_STAT,
-		[SCR_CONTROL]		= PORT_SCR_CTL,
-		[SCR_ERROR]		= PORT_SCR_ERR,
-		[SCR_ACTIVE]		= PORT_SCR_ACT,
-		[SCR_NOTIFICATION]	= PORT_SCR_NTF,
-	};
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-
-	if (sc_reg < ARRAY_SIZE(offset) &&
-	    (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
-		return offset[sc_reg];
-	return 0;
-}
-
-static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
-{
-	void __iomem *port_mmio = ahci_port_base(link->ap);
-	int offset = ahci_scr_offset(link->ap, sc_reg);
-
-	if (offset) {
-		*val = readl(port_mmio + offset);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
-{
-	void __iomem *port_mmio = ahci_port_base(link->ap);
-	int offset = ahci_scr_offset(link->ap, sc_reg);
-
-	if (offset) {
-		writel(val, port_mmio + offset);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static void ahci_start_engine(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 tmp;
-
-	/* start DMA */
-	tmp = readl(port_mmio + PORT_CMD);
-	tmp |= PORT_CMD_START;
-	writel(tmp, port_mmio + PORT_CMD);
-	readl(port_mmio + PORT_CMD); /* flush */
-}
-
-static int ahci_stop_engine(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 tmp;
-
-	tmp = readl(port_mmio + PORT_CMD);
-
-	/* check if the HBA is idle */
-	if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
-		return 0;
-
-	/* setting HBA to idle */
-	tmp &= ~PORT_CMD_START;
-	writel(tmp, port_mmio + PORT_CMD);
-
-	/* wait for engine to stop. This could be as long as 500 msec */
-	tmp = ata_wait_register(port_mmio + PORT_CMD,
-				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
-	if (tmp & PORT_CMD_LIST_ON)
-		return -EIO;
-
-	return 0;
-}
-
-static void ahci_start_fis_rx(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 tmp;
-
-	/* set FIS registers */
-	if (hpriv->cap & HOST_CAP_64)
-		writel((pp->cmd_slot_dma >> 16) >> 16,
-		       port_mmio + PORT_LST_ADDR_HI);
-	writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
-
-	if (hpriv->cap & HOST_CAP_64)
-		writel((pp->rx_fis_dma >> 16) >> 16,
-		       port_mmio + PORT_FIS_ADDR_HI);
-	writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
-
-	/* enable FIS reception */
-	tmp = readl(port_mmio + PORT_CMD);
-	tmp |= PORT_CMD_FIS_RX;
-	writel(tmp, port_mmio + PORT_CMD);
-
-	/* flush */
-	readl(port_mmio + PORT_CMD);
-}
-
-static int ahci_stop_fis_rx(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 tmp;
-
-	/* disable FIS reception */
-	tmp = readl(port_mmio + PORT_CMD);
-	tmp &= ~PORT_CMD_FIS_RX;
-	writel(tmp, port_mmio + PORT_CMD);
-
-	/* wait for completion, spec says 500ms, give it 1000 */
-	tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
-				PORT_CMD_FIS_ON, 10, 1000);
-	if (tmp & PORT_CMD_FIS_ON)
-		return -EBUSY;
-
-	return 0;
-}
-
-static void ahci_power_up(struct ata_port *ap)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
-
-	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-
-	/* spin up device */
-	if (hpriv->cap & HOST_CAP_SSS) {
-		cmd |= PORT_CMD_SPIN_UP;
-		writel(cmd, port_mmio + PORT_CMD);
-	}
-
-	/* wake up link */
-	writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
-}
-
-static void ahci_disable_alpm(struct ata_port *ap)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
-	struct ahci_port_priv *pp = ap->private_data;
-
-	/* IPM bits should be disabled by libata-core */
-	/* get the existing command bits */
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* disable ALPM and ASP */
-	cmd &= ~PORT_CMD_ASP;
-	cmd &= ~PORT_CMD_ALPE;
-
-	/* force the interface back to active */
-	cmd |= PORT_CMD_ICC_ACTIVE;
-
-	/* write out new cmd value */
-	writel(cmd, port_mmio + PORT_CMD);
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* wait 10ms to be sure we've come out of any low power state */
-	msleep(10);
-
-	/* clear out any PhyRdy stuff from interrupt status */
-	writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-
-	/* go ahead and clean out PhyRdy Change from Serror too */
-	ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-
-	/*
- 	 * Clear flag to indicate that we should ignore all PhyRdy
- 	 * state changes
- 	 */
-	hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-
-	/*
- 	 * Enable interrupts on Phy Ready.
- 	 */
-	pp->intr_mask |= PORT_IRQ_PHYRDY;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
-	/*
- 	 * don't change the link pm policy - we can be called
- 	 * just to turn of link pm temporarily
- 	 */
-}
-
-static int ahci_enable_alpm(struct ata_port *ap,
-	enum link_pm policy)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 asp;
-
-	/* Make sure the host is capable of link power management */
-	if (!(hpriv->cap & HOST_CAP_ALPM))
-		return -EINVAL;
-
-	switch (policy) {
-	case MAX_PERFORMANCE:
-	case NOT_AVAILABLE:
-		/*
- 		 * if we came here with NOT_AVAILABLE,
- 		 * it just means this is the first time we
- 		 * have tried to enable - default to max performance,
- 		 * and let the user go to lower power modes on request.
- 		 */
-		ahci_disable_alpm(ap);
-		return 0;
-	case MIN_POWER:
-		/* configure HBA to enter SLUMBER */
-		asp = PORT_CMD_ASP;
-		break;
-	case MEDIUM_POWER:
-		/* configure HBA to enter PARTIAL */
-		asp = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/*
- 	 * Disable interrupts on Phy Ready. This keeps us from
- 	 * getting woken up due to spurious phy ready interrupts
-	 * TBD - Hot plug should be done via polling now, is
-	 * that even supported?
- 	 */
-	pp->intr_mask &= ~PORT_IRQ_PHYRDY;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
-	/*
- 	 * Set a flag to indicate that we should ignore all PhyRdy
- 	 * state changes since these can happen now whenever we
- 	 * change link state
- 	 */
-	hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
-
-	/* get the existing command bits */
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/*
- 	 * Set ASP based on Policy
- 	 */
-	cmd |= asp;
-
-	/*
- 	 * Setting this bit will instruct the HBA to aggressively
- 	 * enter a lower power link state when it's appropriate and
- 	 * based on the value set above for ASP
- 	 */
-	cmd |= PORT_CMD_ALPE;
-
-	/* write out new cmd value */
-	writel(cmd, port_mmio + PORT_CMD);
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* IPM bits should be set by libata-core */
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static void ahci_power_down(struct ata_port *ap)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd, scontrol;
-
-	if (!(hpriv->cap & HOST_CAP_SSS))
-		return;
-
-	/* put device into listen mode, first set PxSCTL.DET to 0 */
-	scontrol = readl(port_mmio + PORT_SCR_CTL);
-	scontrol &= ~0xf;
-	writel(scontrol, port_mmio + PORT_SCR_CTL);
-
-	/* then set PxCMD.SUD to 0 */
-	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
-	cmd &= ~PORT_CMD_SPIN_UP;
-	writel(cmd, port_mmio + PORT_CMD);
-}
-#endif
-
-static void ahci_start_port(struct ata_port *ap)
-{
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ata_link *link;
-	struct ahci_em_priv *emp;
-	ssize_t rc;
-	int i;
-
-	/* enable FIS reception */
-	ahci_start_fis_rx(ap);
-
-	/* enable DMA */
-	ahci_start_engine(ap);
-
-	/* turn on LEDs */
-	if (ap->flags & ATA_FLAG_EM) {
-		ata_for_each_link(link, ap, EDGE) {
-			emp = &pp->em_priv[link->pmp];
-
-			/* EM Transmit bit maybe busy during init */
-			for (i = 0; i < EM_MAX_RETRY; i++) {
-				rc = ahci_transmit_led_message(ap,
-							       emp->led_state,
-							       4);
-				if (rc == -EBUSY)
-					msleep(1);
-				else
-					break;
-			}
-		}
-	}
-
-	if (ap->flags & ATA_FLAG_SW_ACTIVITY)
-		ata_for_each_link(link, ap, EDGE)
-			ahci_init_sw_activity(link);
-
-}
-
-static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
-{
-	int rc;
-
-	/* disable DMA */
-	rc = ahci_stop_engine(ap);
-	if (rc) {
-		*emsg = "failed to stop engine";
-		return rc;
-	}
-
-	/* disable FIS reception */
-	rc = ahci_stop_fis_rx(ap);
-	if (rc) {
-		*emsg = "failed stop FIS RX";
-		return rc;
-	}
-
-	return 0;
-}
-
-static int ahci_reset_controller(struct ata_host *host)
-{
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 tmp;
-
-	/* we must be in AHCI mode, before using anything
-	 * AHCI-specific, such as HOST_RESET.
-	 */
-	ahci_enable_ahci(mmio);
-
-	/* global controller reset */
-	if (!ahci_skip_host_reset) {
-		tmp = readl(mmio + HOST_CTL);
-		if ((tmp & HOST_RESET) == 0) {
-			writel(tmp | HOST_RESET, mmio + HOST_CTL);
-			readl(mmio + HOST_CTL); /* flush */
-		}
-
-		/*
-		 * to perform host reset, OS should set HOST_RESET
-		 * and poll until this bit is read to be "0".
-		 * reset must complete within 1 second, or
-		 * the hardware should be considered fried.
-		 */
-		tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
-					HOST_RESET, 10, 1000);
-
-		if (tmp & HOST_RESET) {
-			dev_printk(KERN_ERR, host->dev,
-				   "controller reset failed (0x%x)\n", tmp);
-			return -EIO;
-		}
-
-		/* turn on AHCI mode */
-		ahci_enable_ahci(mmio);
-
-		/* Some registers might be cleared on reset.  Restore
-		 * initial values.
-		 */
-		ahci_restore_initial_config(host);
-	} else
-		dev_printk(KERN_INFO, host->dev,
-			   "skipping global host reset\n");
-
-	return 0;
-}
-
 static int ahci_pci_reset_controller(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -1410,286 +412,6 @@ static int ahci_pci_reset_controller(struct ata_host *host)
 	return 0;
 }
 
-static void ahci_sw_activity(struct ata_link *link)
-{
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-
-	if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
-		return;
-
-	emp->activity++;
-	if (!timer_pending(&emp->timer))
-		mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
-}
-
-static void ahci_sw_activity_blink(unsigned long arg)
-{
-	struct ata_link *link = (struct ata_link *)arg;
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-	unsigned long led_message = emp->led_state;
-	u32 activity_led_state;
-	unsigned long flags;
-
-	led_message &= EM_MSG_LED_VALUE;
-	led_message |= ap->port_no | (link->pmp << 8);
-
-	/* check to see if we've had activity.  If so,
-	 * toggle state of LED and reset timer.  If not,
-	 * turn LED to desired idle state.
-	 */
-	spin_lock_irqsave(ap->lock, flags);
-	if (emp->saved_activity != emp->activity) {
-		emp->saved_activity = emp->activity;
-		/* get the current LED state */
-		activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
-
-		if (activity_led_state)
-			activity_led_state = 0;
-		else
-			activity_led_state = 1;
-
-		/* clear old state */
-		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
-
-		/* toggle state */
-		led_message |= (activity_led_state << 16);
-		mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
-	} else {
-		/* switch to idle */
-		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
-		if (emp->blink_policy == BLINK_OFF)
-			led_message |= (1 << 16);
-	}
-	spin_unlock_irqrestore(ap->lock, flags);
-	ahci_transmit_led_message(ap, led_message, 4);
-}
-
-static void ahci_init_sw_activity(struct ata_link *link)
-{
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-
-	/* init activity stats, setup timer */
-	emp->saved_activity = emp->activity = 0;
-	setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
-
-	/* check our blink policy and set flag for link if it's enabled */
-	if (emp->blink_policy)
-		link->flags |= ATA_LFLAG_SW_ACTIVITY;
-}
-
-static int ahci_reset_em(struct ata_host *host)
-{
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 em_ctl;
-
-	em_ctl = readl(mmio + HOST_EM_CTL);
-	if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
-		return -EINVAL;
-
-	writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
-	return 0;
-}
-
-static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
-					ssize_t size)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 em_ctl;
-	u32 message[] = {0, 0};
-	unsigned long flags;
-	int pmp;
-	struct ahci_em_priv *emp;
-
-	/* get the slot number from the message */
-	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-	if (pmp < EM_MAX_SLOTS)
-		emp = &pp->em_priv[pmp];
-	else
-		return -EINVAL;
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	/*
-	 * if we are still busy transmitting a previous message,
-	 * do not allow
-	 */
-	em_ctl = readl(mmio + HOST_EM_CTL);
-	if (em_ctl & EM_CTL_TM) {
-		spin_unlock_irqrestore(ap->lock, flags);
-		return -EBUSY;
-	}
-
-	/*
-	 * create message header - this is all zero except for
-	 * the message size, which is 4 bytes.
-	 */
-	message[0] |= (4 << 8);
-
-	/* ignore 0:4 of byte zero, fill in port info yourself */
-	message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
-
-	/* write message to EM_LOC */
-	writel(message[0], mmio + hpriv->em_loc);
-	writel(message[1], mmio + hpriv->em_loc+4);
-
-	/* save off new led state for port/slot */
-	emp->led_state = state;
-
-	/*
-	 * tell hardware to transmit the message
-	 */
-	writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
-
-	spin_unlock_irqrestore(ap->lock, flags);
-	return size;
-}
-
-static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
-{
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ata_link *link;
-	struct ahci_em_priv *emp;
-	int rc = 0;
-
-	ata_for_each_link(link, ap, EDGE) {
-		emp = &pp->em_priv[link->pmp];
-		rc += sprintf(buf, "%lx\n", emp->led_state);
-	}
-	return rc;
-}
-
-static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
-				size_t size)
-{
-	int state;
-	int pmp;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_em_priv *emp;
-
-	state = simple_strtoul(buf, NULL, 0);
-
-	/* get the slot number from the message */
-	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
-	if (pmp < EM_MAX_SLOTS)
-		emp = &pp->em_priv[pmp];
-	else
-		return -EINVAL;
-
-	/* mask off the activity bits if we are in sw_activity
-	 * mode, user should turn off sw_activity before setting
-	 * activity led through em_message
-	 */
-	if (emp->blink_policy)
-		state &= ~EM_MSG_LED_VALUE_ACTIVITY;
-
-	return ahci_transmit_led_message(ap, state, size);
-}
-
-static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
-{
-	struct ata_link *link = dev->link;
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-	u32 port_led_state = emp->led_state;
-
-	/* save the desired Activity LED behavior */
-	if (val == OFF) {
-		/* clear LFLAG */
-		link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
-
-		/* set the LED to OFF */
-		port_led_state &= EM_MSG_LED_VALUE_OFF;
-		port_led_state |= (ap->port_no | (link->pmp << 8));
-		ahci_transmit_led_message(ap, port_led_state, 4);
-	} else {
-		link->flags |= ATA_LFLAG_SW_ACTIVITY;
-		if (val == BLINK_OFF) {
-			/* set LED to ON for idle */
-			port_led_state &= EM_MSG_LED_VALUE_OFF;
-			port_led_state |= (ap->port_no | (link->pmp << 8));
-			port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
-			ahci_transmit_led_message(ap, port_led_state, 4);
-		}
-	}
-	emp->blink_policy = val;
-	return 0;
-}
-
-static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
-{
-	struct ata_link *link = dev->link;
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
-
-	/* display the saved value of activity behavior for this
-	 * disk.
-	 */
-	return sprintf(buf, "%d\n", emp->blink_policy);
-}
-
-static void ahci_port_init(struct device *dev, struct ata_port *ap,
-			   int port_no, void __iomem *mmio,
-			   void __iomem *port_mmio)
-{
-	const char *emsg = NULL;
-	int rc;
-	u32 tmp;
-
-	/* make sure port is not active */
-	rc = ahci_deinit_port(ap, &emsg);
-	if (rc)
-		dev_warn(dev, "%s (%d)\n", emsg, rc);
-
-	/* clear SError */
-	tmp = readl(port_mmio + PORT_SCR_ERR);
-	VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
-	writel(tmp, port_mmio + PORT_SCR_ERR);
-
-	/* clear port IRQ */
-	tmp = readl(port_mmio + PORT_IRQ_STAT);
-	VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
-	if (tmp)
-		writel(tmp, port_mmio + PORT_IRQ_STAT);
-
-	writel(1 << port_no, mmio + HOST_IRQ_STAT);
-}
-
-static void ahci_init_controller(struct ata_host *host)
-{
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	int i;
-	void __iomem *port_mmio;
-	u32 tmp;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		port_mmio = ahci_port_base(ap);
-		if (ata_port_is_dummy(ap))
-			continue;
-
-		ahci_port_init(host->dev, ap, i, mmio, port_mmio);
-	}
-
-	tmp = readl(mmio + HOST_CTL);
-	VPRINTK("HOST_CTL 0x%x\n", tmp);
-	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
-	tmp = readl(mmio + HOST_CTL);
-	VPRINTK("HOST_CTL 0x%x\n", tmp);
-}
-
 static void ahci_pci_init_controller(struct ata_host *host)
 {
 	struct ahci_host_priv *hpriv = host->private_data;
@@ -1717,205 +439,6 @@ static void ahci_pci_init_controller(struct ata_host *host)
 	ahci_init_controller(host);
 }
 
-static void ahci_dev_config(struct ata_device *dev)
-{
-	struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
-
-	if (hpriv->flags & AHCI_HFLAG_SECT255) {
-		dev->max_sectors = 255;
-		ata_dev_printk(dev, KERN_INFO,
-			       "SB600 AHCI: limiting to 255 sectors per cmd\n");
-	}
-}
-
-static unsigned int ahci_dev_classify(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ata_taskfile tf;
-	u32 tmp;
-
-	tmp = readl(port_mmio + PORT_SIG);
-	tf.lbah		= (tmp >> 24)	& 0xff;
-	tf.lbam		= (tmp >> 16)	& 0xff;
-	tf.lbal		= (tmp >> 8)	& 0xff;
-	tf.nsect	= (tmp)		& 0xff;
-
-	return ata_dev_classify(&tf);
-}
-
-static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
-			       u32 opts)
-{
-	dma_addr_t cmd_tbl_dma;
-
-	cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
-
-	pp->cmd_slot[tag].opts = cpu_to_le32(opts);
-	pp->cmd_slot[tag].status = 0;
-	pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
-	pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
-}
-
-static int ahci_kick_engine(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-	u32 tmp;
-	int busy, rc;
-
-	/* stop engine */
-	rc = ahci_stop_engine(ap);
-	if (rc)
-		goto out_restart;
-
-	/* need to do CLO?
-	 * always do CLO if PMP is attached (AHCI-1.3 9.2)
-	 */
-	busy = status & (ATA_BUSY | ATA_DRQ);
-	if (!busy && !sata_pmp_attached(ap)) {
-		rc = 0;
-		goto out_restart;
-	}
-
-	if (!(hpriv->cap & HOST_CAP_CLO)) {
-		rc = -EOPNOTSUPP;
-		goto out_restart;
-	}
-
-	/* perform CLO */
-	tmp = readl(port_mmio + PORT_CMD);
-	tmp |= PORT_CMD_CLO;
-	writel(tmp, port_mmio + PORT_CMD);
-
-	rc = 0;
-	tmp = ata_wait_register(port_mmio + PORT_CMD,
-				PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
-	if (tmp & PORT_CMD_CLO)
-		rc = -EIO;
-
-	/* restart engine */
- out_restart:
-	ahci_start_engine(ap);
-	return rc;
-}
-
-static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
-				struct ata_taskfile *tf, int is_cmd, u16 flags,
-				unsigned long timeout_msec)
-{
-	const u32 cmd_fis_len = 5; /* five dwords */
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u8 *fis = pp->cmd_tbl;
-	u32 tmp;
-
-	/* prep the command */
-	ata_tf_to_fis(tf, pmp, is_cmd, fis);
-	ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
-
-	/* issue & wait */
-	writel(1, port_mmio + PORT_CMD_ISSUE);
-
-	if (timeout_msec) {
-		tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
-					1, timeout_msec);
-		if (tmp & 0x1) {
-			ahci_kick_engine(ap);
-			return -EBUSY;
-		}
-	} else
-		readl(port_mmio + PORT_CMD_ISSUE);	/* flush */
-
-	return 0;
-}
-
-static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
-			     int pmp, unsigned long deadline,
-			     int (*check_ready)(struct ata_link *link))
-{
-	struct ata_port *ap = link->ap;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	const char *reason = NULL;
-	unsigned long now, msecs;
-	struct ata_taskfile tf;
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	/* prepare for SRST (AHCI-1.1 10.4.1) */
-	rc = ahci_kick_engine(ap);
-	if (rc && rc != -EOPNOTSUPP)
-		ata_link_printk(link, KERN_WARNING,
-				"failed to reset engine (errno=%d)\n", rc);
-
-	ata_tf_init(link->device, &tf);
-
-	/* issue the first D2H Register FIS */
-	msecs = 0;
-	now = jiffies;
-	if (time_after(now, deadline))
-		msecs = jiffies_to_msecs(deadline - now);
-
-	tf.ctl |= ATA_SRST;
-	if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
-				 AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
-		rc = -EIO;
-		reason = "1st FIS failed";
-		goto fail;
-	}
-
-	/* spec says at least 5us, but be generous and sleep for 1ms */
-	msleep(1);
-
-	/* issue the second D2H Register FIS */
-	tf.ctl &= ~ATA_SRST;
-	ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
-
-	/* wait for link to become ready */
-	rc = ata_wait_after_reset(link, deadline, check_ready);
-	if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
-		/*
-		 * Workaround for cases where link online status can't
-		 * be trusted.  Treat device readiness timeout as link
-		 * offline.
-		 */
-		ata_link_printk(link, KERN_INFO,
-				"device not ready, treating as offline\n");
-		*class = ATA_DEV_NONE;
-	} else if (rc) {
-		/* link occupied, -ENODEV too is an error */
-		reason = "device not ready";
-		goto fail;
-	} else
-		*class = ahci_dev_classify(ap);
-
-	DPRINTK("EXIT, class=%u\n", *class);
-	return 0;
-
- fail:
-	ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
-	return rc;
-}
-
-static int ahci_check_ready(struct ata_link *link)
-{
-	void __iomem *port_mmio = ahci_port_base(link->ap);
-	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
-	return ata_check_ready(status);
-}
-
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
-			  unsigned long deadline)
-{
-	int pmp = sata_srst_pmp(link);
-
-	DPRINTK("ENTER\n");
-
-	return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
-}
-
 static int ahci_sb600_check_ready(struct ata_link *link)
 {
 	void __iomem *port_mmio = ahci_port_base(link->ap);
@@ -1965,38 +488,6 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
 	return rc;
 }
 
-static int ahci_hardreset(struct ata_link *link, unsigned int *class,
-			  unsigned long deadline)
-{
-	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
-	struct ata_port *ap = link->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-	struct ata_taskfile tf;
-	bool online;
-	int rc;
-
-	DPRINTK("ENTER\n");
-
-	ahci_stop_engine(ap);
-
-	/* clear D2H reception area to properly wait for D2H FIS */
-	ata_tf_init(link->device, &tf);
-	tf.command = 0x80;
-	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
-
-	rc = sata_link_hardreset(link, timing, deadline, &online,
-				 ahci_check_ready);
-
-	ahci_start_engine(ap);
-
-	if (online)
-		*class = ahci_dev_classify(ap);
-
-	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-	return rc;
-}
-
 static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
 				 unsigned long deadline)
 {
@@ -2065,590 +556,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
 	return rc;
 }
 
-static void ahci_postreset(struct ata_link *link, unsigned int *class)
-{
-	struct ata_port *ap = link->ap;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 new_tmp, tmp;
-
-	ata_std_postreset(link, class);
-
-	/* Make sure port's ATAPI bit is set appropriately */
-	new_tmp = tmp = readl(port_mmio + PORT_CMD);
-	if (*class == ATA_DEV_ATAPI)
-		new_tmp |= PORT_CMD_ATAPI;
-	else
-		new_tmp &= ~PORT_CMD_ATAPI;
-	if (new_tmp != tmp) {
-		writel(new_tmp, port_mmio + PORT_CMD);
-		readl(port_mmio + PORT_CMD); /* flush */
-	}
-}
-
-static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
-{
-	struct scatterlist *sg;
-	struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
-	unsigned int si;
-
-	VPRINTK("ENTER\n");
-
-	/*
-	 * Next, the S/G list.
-	 */
-	for_each_sg(qc->sg, sg, qc->n_elem, si) {
-		dma_addr_t addr = sg_dma_address(sg);
-		u32 sg_len = sg_dma_len(sg);
-
-		ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
-		ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
-		ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
-	}
-
-	return si;
-}
-
-static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-
-	if (!sata_pmp_attached(ap) || pp->fbs_enabled)
-		return ata_std_qc_defer(qc);
-	else
-		return sata_pmp_qc_defer_cmd_switch(qc);
-}
-
-static void ahci_qc_prep(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	struct ahci_port_priv *pp = ap->private_data;
-	int is_atapi = ata_is_atapi(qc->tf.protocol);
-	void *cmd_tbl;
-	u32 opts;
-	const u32 cmd_fis_len = 5; /* five dwords */
-	unsigned int n_elem;
-
-	/*
-	 * Fill in command table information.  First, the header,
-	 * a SATA Register - Host to Device command FIS.
-	 */
-	cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
-
-	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
-	if (is_atapi) {
-		memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
-		memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
-	}
-
-	n_elem = 0;
-	if (qc->flags & ATA_QCFLAG_DMAMAP)
-		n_elem = ahci_fill_sg(qc, cmd_tbl);
-
-	/*
-	 * Fill in command slot information.
-	 */
-	opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
-	if (qc->tf.flags & ATA_TFLAG_WRITE)
-		opts |= AHCI_CMD_WRITE;
-	if (is_atapi)
-		opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
-
-	ahci_fill_cmd_slot(pp, qc->tag, opts);
-}
-
-static void ahci_fbs_dec_intr(struct ata_port *ap)
-{
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 fbs = readl(port_mmio + PORT_FBS);
-	int retries = 3;
-
-	DPRINTK("ENTER\n");
-	BUG_ON(!pp->fbs_enabled);
-
-	/* time to wait for DEC is not specified by AHCI spec,
-	 * add a retry loop for safety.
-	 */
-	writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
-	fbs = readl(port_mmio + PORT_FBS);
-	while ((fbs & PORT_FBS_DEC) && retries--) {
-		udelay(1);
-		fbs = readl(port_mmio + PORT_FBS);
-	}
-
-	if (fbs & PORT_FBS_DEC)
-		dev_printk(KERN_ERR, ap->host->dev,
-			   "failed to clear device error\n");
-}
-
-static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ata_eh_info *host_ehi = &ap->link.eh_info;
-	struct ata_link *link = NULL;
-	struct ata_queued_cmd *active_qc;
-	struct ata_eh_info *active_ehi;
-	bool fbs_need_dec = false;
-	u32 serror;
-
-	/* determine active link with error */
-	if (pp->fbs_enabled) {
-		void __iomem *port_mmio = ahci_port_base(ap);
-		u32 fbs = readl(port_mmio + PORT_FBS);
-		int pmp = fbs >> PORT_FBS_DWE_OFFSET;
-
-		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
-		    ata_link_online(&ap->pmp_link[pmp])) {
-			link = &ap->pmp_link[pmp];
-			fbs_need_dec = true;
-		}
-
-	} else
-		ata_for_each_link(link, ap, EDGE)
-			if (ata_link_active(link))
-				break;
-
-	if (!link)
-		link = &ap->link;
-
-	active_qc = ata_qc_from_tag(ap, link->active_tag);
-	active_ehi = &link->eh_info;
-
-	/* record irq stat */
-	ata_ehi_clear_desc(host_ehi);
-	ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
-
-	/* AHCI needs SError cleared; otherwise, it might lock up */
-	ahci_scr_read(&ap->link, SCR_ERROR, &serror);
-	ahci_scr_write(&ap->link, SCR_ERROR, serror);
-	host_ehi->serror |= serror;
-
-	/* some controllers set IRQ_IF_ERR on device errors, ignore it */
-	if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
-		irq_stat &= ~PORT_IRQ_IF_ERR;
-
-	if (irq_stat & PORT_IRQ_TF_ERR) {
-		/* If qc is active, charge it; otherwise, the active
-		 * link.  There's no active qc on NCQ errors.  It will
-		 * be determined by EH by reading log page 10h.
-		 */
-		if (active_qc)
-			active_qc->err_mask |= AC_ERR_DEV;
-		else
-			active_ehi->err_mask |= AC_ERR_DEV;
-
-		if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
-			host_ehi->serror &= ~SERR_INTERNAL;
-	}
-
-	if (irq_stat & PORT_IRQ_UNK_FIS) {
-		u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
-
-		active_ehi->err_mask |= AC_ERR_HSM;
-		active_ehi->action |= ATA_EH_RESET;
-		ata_ehi_push_desc(active_ehi,
-				  "unknown FIS %08x %08x %08x %08x" ,
-				  unk[0], unk[1], unk[2], unk[3]);
-	}
-
-	if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
-		active_ehi->err_mask |= AC_ERR_HSM;
-		active_ehi->action |= ATA_EH_RESET;
-		ata_ehi_push_desc(active_ehi, "incorrect PMP");
-	}
-
-	if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
-		host_ehi->err_mask |= AC_ERR_HOST_BUS;
-		host_ehi->action |= ATA_EH_RESET;
-		ata_ehi_push_desc(host_ehi, "host bus error");
-	}
-
-	if (irq_stat & PORT_IRQ_IF_ERR) {
-		if (fbs_need_dec)
-			active_ehi->err_mask |= AC_ERR_DEV;
-		else {
-			host_ehi->err_mask |= AC_ERR_ATA_BUS;
-			host_ehi->action |= ATA_EH_RESET;
-		}
-
-		ata_ehi_push_desc(host_ehi, "interface fatal error");
-	}
-
-	if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
-		ata_ehi_hotplugged(host_ehi);
-		ata_ehi_push_desc(host_ehi, "%s",
-			irq_stat & PORT_IRQ_CONNECT ?
-			"connection status changed" : "PHY RDY changed");
-	}
-
-	/* okay, let's hand over to EH */
-
-	if (irq_stat & PORT_IRQ_FREEZE)
-		ata_port_freeze(ap);
-	else if (fbs_need_dec) {
-		ata_link_abort(link);
-		ahci_fbs_dec_intr(ap);
-	} else
-		ata_port_abort(ap);
-}
-
-static void ahci_port_intr(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ata_eh_info *ehi = &ap->link.eh_info;
-	struct ahci_port_priv *pp = ap->private_data;
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
-	u32 status, qc_active;
-	int rc;
-
-	status = readl(port_mmio + PORT_IRQ_STAT);
-	writel(status, port_mmio + PORT_IRQ_STAT);
-
-	/* ignore BAD_PMP while resetting */
-	if (unlikely(resetting))
-		status &= ~PORT_IRQ_BAD_PMP;
-
-	/* If we are getting PhyRdy, this is
- 	 * just a power state change, we should
- 	 * clear out this, plus the PhyRdy/Comm
- 	 * Wake bits from Serror
- 	 */
-	if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
-		(status & PORT_IRQ_PHYRDY)) {
-		status &= ~PORT_IRQ_PHYRDY;
-		ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-	}
-
-	if (unlikely(status & PORT_IRQ_ERROR)) {
-		ahci_error_intr(ap, status);
-		return;
-	}
-
-	if (status & PORT_IRQ_SDB_FIS) {
-		/* If SNotification is available, leave notification
-		 * handling to sata_async_notification().  If not,
-		 * emulate it by snooping SDB FIS RX area.
-		 *
-		 * Snooping FIS RX area is probably cheaper than
-		 * poking SNotification but some constrollers which
-		 * implement SNotification, ICH9 for example, don't
-		 * store AN SDB FIS into receive area.
-		 */
-		if (hpriv->cap & HOST_CAP_SNTF)
-			sata_async_notification(ap);
-		else {
-			/* If the 'N' bit in word 0 of the FIS is set,
-			 * we just received asynchronous notification.
-			 * Tell libata about it.
-			 *
-			 * Lack of SNotification should not appear in
-			 * ahci 1.2, so the workaround is unnecessary
-			 * when FBS is enabled.
-			 */
-			if (pp->fbs_enabled)
-				WARN_ON_ONCE(1);
-			else {
-				const __le32 *f = pp->rx_fis + RX_FIS_SDB;
-				u32 f0 = le32_to_cpu(f[0]);
-				if (f0 & (1 << 15))
-					sata_async_notification(ap);
-			}
-		}
-	}
-
-	/* pp->active_link is valid iff any command is in flight */
-	if (ap->qc_active && pp->active_link->sactive)
-		qc_active = readl(port_mmio + PORT_SCR_ACT);
-	else
-		qc_active = readl(port_mmio + PORT_CMD_ISSUE);
-
-	rc = ata_qc_complete_multiple(ap, qc_active);
-
-	/* while resetting, invalid completions are expected */
-	if (unlikely(rc < 0 && !resetting)) {
-		ehi->err_mask |= AC_ERR_HSM;
-		ehi->action |= ATA_EH_RESET;
-		ata_port_freeze(ap);
-	}
-}
-
-static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
-{
-	struct ata_host *host = dev_instance;
-	struct ahci_host_priv *hpriv;
-	unsigned int i, handled = 0;
-	void __iomem *mmio;
-	u32 irq_stat, irq_masked;
-
-	VPRINTK("ENTER\n");
-
-	hpriv = host->private_data;
-	mmio = hpriv->mmio;
-
-	/* sigh.  0xffffffff is a valid return from h/w */
-	irq_stat = readl(mmio + HOST_IRQ_STAT);
-	if (!irq_stat)
-		return IRQ_NONE;
-
-	irq_masked = irq_stat & hpriv->port_map;
-
-	spin_lock(&host->lock);
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap;
-
-		if (!(irq_masked & (1 << i)))
-			continue;
-
-		ap = host->ports[i];
-		if (ap) {
-			ahci_port_intr(ap);
-			VPRINTK("port %u\n", i);
-		} else {
-			VPRINTK("port %u (no irq)\n", i);
-			if (ata_ratelimit())
-				dev_printk(KERN_WARNING, host->dev,
-					"interrupt on disabled port %u\n", i);
-		}
-
-		handled = 1;
-	}
-
-	/* HOST_IRQ_STAT behaves as level triggered latch meaning that
-	 * it should be cleared after all the port events are cleared;
-	 * otherwise, it will raise a spurious interrupt after each
-	 * valid one.  Please read section 10.6.2 of ahci 1.1 for more
-	 * information.
-	 *
-	 * Also, use the unmasked value to clear interrupt as spurious
-	 * pending event on a dummy port might cause screaming IRQ.
-	 */
-	writel(irq_stat, mmio + HOST_IRQ_STAT);
-
-	spin_unlock(&host->lock);
-
-	VPRINTK("EXIT\n");
-
-	return IRQ_RETVAL(handled);
-}
-
-static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_port_priv *pp = ap->private_data;
-
-	/* Keep track of the currently active link.  It will be used
-	 * in completion path to determine whether NCQ phase is in
-	 * progress.
-	 */
-	pp->active_link = qc->dev->link;
-
-	if (qc->tf.protocol == ATA_PROT_NCQ)
-		writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
-
-	if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
-		u32 fbs = readl(port_mmio + PORT_FBS);
-		fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
-		fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
-		writel(fbs, port_mmio + PORT_FBS);
-		pp->fbs_last_dev = qc->dev->link->pmp;
-	}
-
-	writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
-
-	ahci_sw_activity(qc->dev->link);
-
-	return 0;
-}
-
-static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
-{
-	struct ahci_port_priv *pp = qc->ap->private_data;
-	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
-
-	if (pp->fbs_enabled)
-		d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
-
-	ata_tf_from_fis(d2h_fis, &qc->result_tf);
-	return true;
-}
-
-static void ahci_freeze(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-
-	/* turn IRQ off */
-	writel(0, port_mmio + PORT_IRQ_MASK);
-}
-
-static void ahci_thaw(struct ata_port *ap)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 tmp;
-	struct ahci_port_priv *pp = ap->private_data;
-
-	/* clear IRQ */
-	tmp = readl(port_mmio + PORT_IRQ_STAT);
-	writel(tmp, port_mmio + PORT_IRQ_STAT);
-	writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
-
-	/* turn IRQ back on */
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-}
-
-static void ahci_error_handler(struct ata_port *ap)
-{
-	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
-		/* restart engine */
-		ahci_stop_engine(ap);
-		ahci_start_engine(ap);
-	}
-
-	sata_pmp_error_handler(ap);
-}
-
-static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
-{
-	struct ata_port *ap = qc->ap;
-
-	/* make DMA engine forget about the failed command */
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		ahci_kick_engine(ap);
-}
-
-static void ahci_enable_fbs(struct ata_port *ap)
-{
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 fbs;
-	int rc;
-
-	if (!pp->fbs_supported)
-		return;
-
-	fbs = readl(port_mmio + PORT_FBS);
-	if (fbs & PORT_FBS_EN) {
-		pp->fbs_enabled = true;
-		pp->fbs_last_dev = -1; /* initialization */
-		return;
-	}
-
-	rc = ahci_stop_engine(ap);
-	if (rc)
-		return;
-
-	writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
-	fbs = readl(port_mmio + PORT_FBS);
-	if (fbs & PORT_FBS_EN) {
-		dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
-		pp->fbs_enabled = true;
-		pp->fbs_last_dev = -1; /* initialization */
-	} else
-		dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
-
-	ahci_start_engine(ap);
-}
-
-static void ahci_disable_fbs(struct ata_port *ap)
-{
-	struct ahci_port_priv *pp = ap->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 fbs;
-	int rc;
-
-	if (!pp->fbs_supported)
-		return;
-
-	fbs = readl(port_mmio + PORT_FBS);
-	if ((fbs & PORT_FBS_EN) == 0) {
-		pp->fbs_enabled = false;
-		return;
-	}
-
-	rc = ahci_stop_engine(ap);
-	if (rc)
-		return;
-
-	writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
-	fbs = readl(port_mmio + PORT_FBS);
-	if (fbs & PORT_FBS_EN)
-		dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
-	else {
-		dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
-		pp->fbs_enabled = false;
-	}
-
-	ahci_start_engine(ap);
-}
-
-static void ahci_pmp_attach(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 cmd;
-
-	cmd = readl(port_mmio + PORT_CMD);
-	cmd |= PORT_CMD_PMP;
-	writel(cmd, port_mmio + PORT_CMD);
-
-	ahci_enable_fbs(ap);
-
-	pp->intr_mask |= PORT_IRQ_BAD_PMP;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-}
-
-static void ahci_pmp_detach(struct ata_port *ap)
-{
-	void __iomem *port_mmio = ahci_port_base(ap);
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 cmd;
-
-	ahci_disable_fbs(ap);
-
-	cmd = readl(port_mmio + PORT_CMD);
-	cmd &= ~PORT_CMD_PMP;
-	writel(cmd, port_mmio + PORT_CMD);
-
-	pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-}
-
-static int ahci_port_resume(struct ata_port *ap)
-{
-	ahci_power_up(ap);
-	ahci_start_port(ap);
-
-	if (sata_pmp_attached(ap))
-		ahci_pmp_attach(ap);
-	else
-		ahci_pmp_detach(ap);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM
-static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
-{
-	const char *emsg = NULL;
-	int rc;
-
-	rc = ahci_deinit_port(ap, &emsg);
-	if (rc == 0)
-		ahci_power_down(ap);
-	else {
-		ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
-		ahci_start_port(ap);
-	}
-
-	return rc;
-}
-
 static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
 {
 	struct ata_host *host = dev_get_drvdata(&pdev->dev);
@@ -2700,92 +608,6 @@ static int ahci_pci_device_resume(struct pci_dev *pdev)
 }
 #endif
 
-static int ahci_port_start(struct ata_port *ap)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
-	struct device *dev = ap->host->dev;
-	struct ahci_port_priv *pp;
-	void *mem;
-	dma_addr_t mem_dma;
-	size_t dma_sz, rx_fis_sz;
-
-	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
-	if (!pp)
-		return -ENOMEM;
-
-	/* check FBS capability */
-	if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
-		void __iomem *port_mmio = ahci_port_base(ap);
-		u32 cmd = readl(port_mmio + PORT_CMD);
-		if (cmd & PORT_CMD_FBSCP)
-			pp->fbs_supported = true;
-		else
-			dev_printk(KERN_WARNING, dev,
-				   "The port is not capable of FBS\n");
-	}
-
-	if (pp->fbs_supported) {
-		dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
-		rx_fis_sz = AHCI_RX_FIS_SZ * 16;
-	} else {
-		dma_sz = AHCI_PORT_PRIV_DMA_SZ;
-		rx_fis_sz = AHCI_RX_FIS_SZ;
-	}
-
-	mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
-	if (!mem)
-		return -ENOMEM;
-	memset(mem, 0, dma_sz);
-
-	/*
-	 * First item in chunk of DMA memory: 32-slot command table,
-	 * 32 bytes each in size
-	 */
-	pp->cmd_slot = mem;
-	pp->cmd_slot_dma = mem_dma;
-
-	mem += AHCI_CMD_SLOT_SZ;
-	mem_dma += AHCI_CMD_SLOT_SZ;
-
-	/*
-	 * Second item: Received-FIS area
-	 */
-	pp->rx_fis = mem;
-	pp->rx_fis_dma = mem_dma;
-
-	mem += rx_fis_sz;
-	mem_dma += rx_fis_sz;
-
-	/*
-	 * Third item: data area for storing a single command
-	 * and its scatter-gather table
-	 */
-	pp->cmd_tbl = mem;
-	pp->cmd_tbl_dma = mem_dma;
-
-	/*
-	 * Save off initial list of interrupts to be enabled.
-	 * This could be changed later
-	 */
-	pp->intr_mask = DEF_PORT_IRQ;
-
-	ap->private_data = pp;
-
-	/* engage engines, captain */
-	return ahci_port_resume(ap);
-}
-
-static void ahci_port_stop(struct ata_port *ap)
-{
-	const char *emsg = NULL;
-	int rc;
-
-	/* de-initialize port */
-	rc = ahci_deinit_port(ap, &emsg);
-	if (rc)
-		ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
-}
-
 static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 {
 	int rc;
@@ -2818,74 +640,6 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 	return 0;
 }
 
-static void ahci_print_info(struct ata_host *host, const char *scc_s)
-{
-	struct ahci_host_priv *hpriv = host->private_data;
-	void __iomem *mmio = hpriv->mmio;
-	u32 vers, cap, cap2, impl, speed;
-	const char *speed_s;
-
-	vers = readl(mmio + HOST_VERSION);
-	cap = hpriv->cap;
-	cap2 = hpriv->cap2;
-	impl = hpriv->port_map;
-
-	speed = (cap >> 20) & 0xf;
-	if (speed == 1)
-		speed_s = "1.5";
-	else if (speed == 2)
-		speed_s = "3";
-	else if (speed == 3)
-		speed_s = "6";
-	else
-		speed_s = "?";
-
-	dev_info(host->dev,
-		"AHCI %02x%02x.%02x%02x "
-		"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
-		,
-
-		(vers >> 24) & 0xff,
-		(vers >> 16) & 0xff,
-		(vers >> 8) & 0xff,
-		vers & 0xff,
-
-		((cap >> 8) & 0x1f) + 1,
-		(cap & 0x1f) + 1,
-		speed_s,
-		impl,
-		scc_s);
-
-	dev_info(host->dev,
-		"flags: "
-		"%s%s%s%s%s%s%s"
-		"%s%s%s%s%s%s%s"
-		"%s%s%s%s%s%s\n"
-		,
-
-		cap & HOST_CAP_64 ? "64bit " : "",
-		cap & HOST_CAP_NCQ ? "ncq " : "",
-		cap & HOST_CAP_SNTF ? "sntf " : "",
-		cap & HOST_CAP_MPS ? "ilck " : "",
-		cap & HOST_CAP_SSS ? "stag " : "",
-		cap & HOST_CAP_ALPM ? "pm " : "",
-		cap & HOST_CAP_LED ? "led " : "",
-		cap & HOST_CAP_CLO ? "clo " : "",
-		cap & HOST_CAP_ONLY ? "only " : "",
-		cap & HOST_CAP_PMP ? "pmp " : "",
-		cap & HOST_CAP_FBS ? "fbs " : "",
-		cap & HOST_CAP_PIO_MULTI ? "pio " : "",
-		cap & HOST_CAP_SSC ? "slum " : "",
-		cap & HOST_CAP_PART ? "part " : "",
-		cap & HOST_CAP_CCC ? "ccc " : "",
-		cap & HOST_CAP_EMS ? "ems " : "",
-		cap & HOST_CAP_SXS ? "sxs " : "",
-		cap2 & HOST_CAP2_APST ? "apst " : "",
-		cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
-		cap2 & HOST_CAP2_BOH ? "boh " : ""
-		);
-}
-
 static void ahci_pci_print_info(struct ata_host *host)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -3231,29 +985,6 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
 {}
 #endif
 
-static void ahci_set_em_messages(struct ahci_host_priv *hpriv,
-				 struct ata_port_info *pi)
-{
-	u8 messages;
-	void __iomem *mmio = hpriv->mmio;
-	u32 em_loc = readl(mmio + HOST_EM_LOC);
-	u32 em_ctl = readl(mmio + HOST_EM_CTL);
-
-	if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS))
-		return;
-
-	messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
-
-	/* we only support LED message type right now */
-	if ((messages & 0x01) && (ahci_em_messages == 1)) {
-		/* store em_loc */
-		hpriv->em_loc = ((em_loc >> 16) * 4);
-		pi->flags |= ATA_FLAG_EM;
-		if (!(em_ctl & EM_CTL_ALHD))
-			pi->flags |= ATA_FLAG_SW_ACTIVITY;
-	}
-}
-
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	static int printed_version;
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
new file mode 100644
index 0000000..3ec32ee
--- /dev/null
+++ b/drivers/ata/libahci.c
@@ -0,0 +1,2059 @@
+/*
+ *  ahci.c - AHCI SATA low-level routines
+ *
+ *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
+ *    		    Please ALWAYS copy linux-ide@vger.kernel.org
+ *		    on emails.
+ *
+ *  Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <linux/libata.h>
+#include "libahci.h"
+
+static int ahci_skip_host_reset;
+int ahci_ignore_sss;
+
+module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
+MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
+
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
+static int ahci_enable_alpm(struct ata_port *ap,
+		enum link_pm policy);
+static void ahci_disable_alpm(struct ata_port *ap);
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+			      size_t size);
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+					ssize_t size);
+
+
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
+static int ahci_port_start(struct ata_port *ap);
+static void ahci_port_stop(struct ata_port *ap);
+static void ahci_qc_prep(struct ata_queued_cmd *qc);
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc);
+static void ahci_freeze(struct ata_port *ap);
+static void ahci_thaw(struct ata_port *ap);
+static void ahci_enable_fbs(struct ata_port *ap);
+static void ahci_disable_fbs(struct ata_port *ap);
+static void ahci_pmp_attach(struct ata_port *ap);
+static void ahci_pmp_detach(struct ata_port *ap);
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline);
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline);
+static void ahci_postreset(struct ata_link *link, unsigned int *class);
+static void ahci_error_handler(struct ata_port *ap);
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+static int ahci_port_resume(struct ata_port *ap);
+static void ahci_dev_config(struct ata_device *dev);
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+			       u32 opts);
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
+#endif
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
+static ssize_t ahci_activity_store(struct ata_device *dev,
+				   enum sw_activity val);
+static void ahci_init_sw_activity(struct ata_link *link);
+
+static ssize_t ahci_show_host_caps(struct device *dev,
+				   struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+				   struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_version(struct device *dev,
+				      struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_port_cmd(struct device *dev,
+				  struct device_attribute *attr, char *buf);
+
+static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
+static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
+static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
+
+static struct device_attribute *ahci_shost_attrs[] = {
+	&dev_attr_link_power_management_policy,
+	&dev_attr_em_message_type,
+	&dev_attr_em_message,
+	&dev_attr_ahci_host_caps,
+	&dev_attr_ahci_host_cap2,
+	&dev_attr_ahci_host_version,
+	&dev_attr_ahci_port_cmd,
+	NULL
+};
+
+static struct device_attribute *ahci_sdev_attrs[] = {
+	&dev_attr_sw_activity,
+	&dev_attr_unload_heads,
+	NULL
+};
+
+struct scsi_host_template ahci_sht = {
+	ATA_NCQ_SHT("ahci"),
+	.can_queue		= AHCI_MAX_CMDS - 1,
+	.sg_tablesize		= AHCI_MAX_SG,
+	.dma_boundary		= AHCI_DMA_BOUNDARY,
+	.shost_attrs		= ahci_shost_attrs,
+	.sdev_attrs		= ahci_sdev_attrs,
+};
+
+struct ata_port_operations ahci_ops = {
+	.inherits		= &sata_pmp_port_ops,
+
+	.qc_defer		= ahci_pmp_qc_defer,
+	.qc_prep		= ahci_qc_prep,
+	.qc_issue		= ahci_qc_issue,
+	.qc_fill_rtf		= ahci_qc_fill_rtf,
+
+	.freeze			= ahci_freeze,
+	.thaw			= ahci_thaw,
+	.softreset		= ahci_softreset,
+	.hardreset		= ahci_hardreset,
+	.postreset		= ahci_postreset,
+	.pmp_softreset		= ahci_softreset,
+	.error_handler		= ahci_error_handler,
+	.post_internal_cmd	= ahci_post_internal_cmd,
+	.dev_config		= ahci_dev_config,
+
+	.scr_read		= ahci_scr_read,
+	.scr_write		= ahci_scr_write,
+	.pmp_attach		= ahci_pmp_attach,
+	.pmp_detach		= ahci_pmp_detach,
+
+	.enable_pm		= ahci_enable_alpm,
+	.disable_pm		= ahci_disable_alpm,
+	.em_show		= ahci_led_show,
+	.em_store		= ahci_led_store,
+	.sw_activity_show	= ahci_activity_show,
+	.sw_activity_store	= ahci_activity_store,
+#ifdef CONFIG_PM
+	.port_suspend		= ahci_port_suspend,
+	.port_resume		= ahci_port_resume,
+#endif
+	.port_start		= ahci_port_start,
+	.port_stop		= ahci_port_stop,
+};
+
+int ahci_em_messages = 1;
+module_param(ahci_em_messages, int, 0444);
+/* add other LED protocol types when they become supported */
+MODULE_PARM_DESC(ahci_em_messages,
+	"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
+
+static void ahci_enable_ahci(void __iomem *mmio)
+{
+	int i;
+	u32 tmp;
+
+	/* turn on AHCI_EN */
+	tmp = readl(mmio + HOST_CTL);
+	if (tmp & HOST_AHCI_EN)
+		return;
+
+	/* Some controllers need AHCI_EN to be written multiple times.
+	 * Try a few times before giving up.
+	 */
+	for (i = 0; i < 5; i++) {
+		tmp |= HOST_AHCI_EN;
+		writel(tmp, mmio + HOST_CTL);
+		tmp = readl(mmio + HOST_CTL);	/* flush && sanity check */
+		if (tmp & HOST_AHCI_EN)
+			return;
+		msleep(10);
+	}
+
+	WARN_ON(1);
+}
+
+static ssize_t ahci_show_host_caps(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+
+	return sprintf(buf, "%x\n", hpriv->cap);
+}
+
+static ssize_t ahci_show_host_cap2(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+
+	return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
+static ssize_t ahci_show_host_version(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+
+	return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION));
+}
+
+static ssize_t ahci_show_port_cmd(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ata_port *ap = ata_shost_to_port(shost);
+	void __iomem *port_mmio = ahci_port_base(ap);
+
+	return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD));
+}
+
+/**
+ *	ahci_save_initial_config - Save and fixup initial config values
+ *	@dev: target AHCI device
+ *	@hpriv: host private area to store config values
+ *	@force_port_map: force port map to a specified value
+ *	@mask_port_map: mask out particular bits from port map
+ *
+ *	Some registers containing configuration info might be setup by
+ *	BIOS and might be cleared on reset.  This function saves the
+ *	initial values of those registers into @hpriv such that they
+ *	can be restored after controller reset.
+ *
+ *	If inconsistent, config values are fixed up by this function.
+ *
+ *	LOCKING:
+ *	None.
+ */
+void ahci_save_initial_config(struct device *dev,
+			      struct ahci_host_priv *hpriv,
+			      unsigned int force_port_map,
+			      unsigned int mask_port_map)
+{
+	void __iomem *mmio = hpriv->mmio;
+	u32 cap, cap2, vers, port_map;
+	int i;
+
+	/* make sure AHCI mode is enabled before accessing CAP */
+	ahci_enable_ahci(mmio);
+
+	/* Values prefixed with saved_ are written back to host after
+	 * reset.  Values without are used for driver operation.
+	 */
+	hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
+	hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+
+	/* CAP2 register is only defined for AHCI 1.2 and later */
+	vers = readl(mmio + HOST_VERSION);
+	if ((vers >> 16) > 1 ||
+	   ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+		hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+	else
+		hpriv->saved_cap2 = cap2 = 0;
+
+	/* some chips have errata preventing 64bit use */
+	if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
+		dev_printk(KERN_INFO, dev,
+			   "controller can't do 64bit DMA, forcing 32bit\n");
+		cap &= ~HOST_CAP_64;
+	}
+
+	if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
+		dev_printk(KERN_INFO, dev,
+			   "controller can't do NCQ, turning off CAP_NCQ\n");
+		cap &= ~HOST_CAP_NCQ;
+	}
+
+	if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+		dev_printk(KERN_INFO, dev,
+			   "controller can do NCQ, turning on CAP_NCQ\n");
+		cap |= HOST_CAP_NCQ;
+	}
+
+	if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
+		dev_printk(KERN_INFO, dev,
+			   "controller can't do PMP, turning off CAP_PMP\n");
+		cap &= ~HOST_CAP_PMP;
+	}
+
+	if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) {
+		dev_printk(KERN_INFO, dev,
+			   "controller can't do SNTF, turning off CAP_SNTF\n");
+		cap &= ~HOST_CAP_SNTF;
+	}
+
+	if (force_port_map && port_map != force_port_map) {
+		dev_printk(KERN_INFO, dev, "forcing port_map 0x%x -> 0x%x\n",
+			   port_map, force_port_map);
+		port_map = force_port_map;
+	}
+
+	if (mask_port_map) {
+		dev_printk(KERN_ERR, dev, "masking port_map 0x%x -> 0x%x\n",
+			   port_map,
+			   port_map & mask_port_map);
+		port_map &= mask_port_map;
+	}
+
+	/* cross check port_map and cap.n_ports */
+	if (port_map) {
+		int map_ports = 0;
+
+		for (i = 0; i < AHCI_MAX_PORTS; i++)
+			if (port_map & (1 << i))
+				map_ports++;
+
+		/* If PI has more ports than n_ports, whine, clear
+		 * port_map and let it be generated from n_ports.
+		 */
+		if (map_ports > ahci_nr_ports(cap)) {
+			dev_printk(KERN_WARNING, dev,
+				   "implemented port map (0x%x) contains more "
+				   "ports than nr_ports (%u), using nr_ports\n",
+				   port_map, ahci_nr_ports(cap));
+			port_map = 0;
+		}
+	}
+
+	/* fabricate port_map from cap.nr_ports */
+	if (!port_map) {
+		port_map = (1 << ahci_nr_ports(cap)) - 1;
+		dev_printk(KERN_WARNING, dev,
+			   "forcing PORTS_IMPL to 0x%x\n", port_map);
+
+		/* write the fixed up value to the PI register */
+		hpriv->saved_port_map = port_map;
+	}
+
+	/* record values to use during operation */
+	hpriv->cap = cap;
+	hpriv->cap2 = cap2;
+	hpriv->port_map = port_map;
+}
+
+/**
+ *	ahci_restore_initial_config - Restore initial config
+ *	@host: target ATA host
+ *
+ *	Restore initial config stored by ahci_save_initial_config().
+ *
+ *	LOCKING:
+ *	None.
+ */
+static void ahci_restore_initial_config(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+
+	writel(hpriv->saved_cap, mmio + HOST_CAP);
+	if (hpriv->saved_cap2)
+		writel(hpriv->saved_cap2, mmio + HOST_CAP2);
+	writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
+	(void) readl(mmio + HOST_PORTS_IMPL);	/* flush */
+}
+
+static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
+{
+	static const int offset[] = {
+		[SCR_STATUS]		= PORT_SCR_STAT,
+		[SCR_CONTROL]		= PORT_SCR_CTL,
+		[SCR_ERROR]		= PORT_SCR_ERR,
+		[SCR_ACTIVE]		= PORT_SCR_ACT,
+		[SCR_NOTIFICATION]	= PORT_SCR_NTF,
+	};
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+
+	if (sc_reg < ARRAY_SIZE(offset) &&
+	    (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
+		return offset[sc_reg];
+	return 0;
+}
+
+static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
+{
+	void __iomem *port_mmio = ahci_port_base(link->ap);
+	int offset = ahci_scr_offset(link->ap, sc_reg);
+
+	if (offset) {
+		*val = readl(port_mmio + offset);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
+{
+	void __iomem *port_mmio = ahci_port_base(link->ap);
+	int offset = ahci_scr_offset(link->ap, sc_reg);
+
+	if (offset) {
+		writel(val, port_mmio + offset);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+void ahci_start_engine(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp;
+
+	/* start DMA */
+	tmp = readl(port_mmio + PORT_CMD);
+	tmp |= PORT_CMD_START;
+	writel(tmp, port_mmio + PORT_CMD);
+	readl(port_mmio + PORT_CMD); /* flush */
+}
+
+int ahci_stop_engine(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp;
+
+	tmp = readl(port_mmio + PORT_CMD);
+
+	/* check if the HBA is idle */
+	if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+		return 0;
+
+	/* setting HBA to idle */
+	tmp &= ~PORT_CMD_START;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/* wait for engine to stop. This could be as long as 500 msec */
+	tmp = ata_wait_register(port_mmio + PORT_CMD,
+				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+	if (tmp & PORT_CMD_LIST_ON)
+		return -EIO;
+
+	return 0;
+}
+
+static void ahci_start_fis_rx(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
+	u32 tmp;
+
+	/* set FIS registers */
+	if (hpriv->cap & HOST_CAP_64)
+		writel((pp->cmd_slot_dma >> 16) >> 16,
+		       port_mmio + PORT_LST_ADDR_HI);
+	writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
+
+	if (hpriv->cap & HOST_CAP_64)
+		writel((pp->rx_fis_dma >> 16) >> 16,
+		       port_mmio + PORT_FIS_ADDR_HI);
+	writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
+
+	/* enable FIS reception */
+	tmp = readl(port_mmio + PORT_CMD);
+	tmp |= PORT_CMD_FIS_RX;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/* flush */
+	readl(port_mmio + PORT_CMD);
+}
+
+static int ahci_stop_fis_rx(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp;
+
+	/* disable FIS reception */
+	tmp = readl(port_mmio + PORT_CMD);
+	tmp &= ~PORT_CMD_FIS_RX;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/* wait for completion, spec says 500ms, give it 1000 */
+	tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
+				PORT_CMD_FIS_ON, 10, 1000);
+	if (tmp & PORT_CMD_FIS_ON)
+		return -EBUSY;
+
+	return 0;
+}
+
+static void ahci_power_up(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 cmd;
+
+	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+
+	/* spin up device */
+	if (hpriv->cap & HOST_CAP_SSS) {
+		cmd |= PORT_CMD_SPIN_UP;
+		writel(cmd, port_mmio + PORT_CMD);
+	}
+
+	/* wake up link */
+	writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
+}
+
+static void ahci_disable_alpm(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 cmd;
+	struct ahci_port_priv *pp = ap->private_data;
+
+	/* IPM bits should be disabled by libata-core */
+	/* get the existing command bits */
+	cmd = readl(port_mmio + PORT_CMD);
+
+	/* disable ALPM and ASP */
+	cmd &= ~PORT_CMD_ASP;
+	cmd &= ~PORT_CMD_ALPE;
+
+	/* force the interface back to active */
+	cmd |= PORT_CMD_ICC_ACTIVE;
+
+	/* write out new cmd value */
+	writel(cmd, port_mmio + PORT_CMD);
+	cmd = readl(port_mmio + PORT_CMD);
+
+	/* wait 10ms to be sure we've come out of any low power state */
+	msleep(10);
+
+	/* clear out any PhyRdy stuff from interrupt status */
+	writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
+
+	/* go ahead and clean out PhyRdy Change from Serror too */
+	ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+
+	/*
+	 * Clear flag to indicate that we should ignore all PhyRdy
+	 * state changes
+	 */
+	hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
+
+	/*
+	 * Enable interrupts on Phy Ready.
+	 */
+	pp->intr_mask |= PORT_IRQ_PHYRDY;
+	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+	/*
+	 * don't change the link pm policy - we can be called
+	 * just to turn of link pm temporarily
+	 */
+}
+
+static int ahci_enable_alpm(struct ata_port *ap,
+	enum link_pm policy)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 cmd;
+	struct ahci_port_priv *pp = ap->private_data;
+	u32 asp;
+
+	/* Make sure the host is capable of link power management */
+	if (!(hpriv->cap & HOST_CAP_ALPM))
+		return -EINVAL;
+
+	switch (policy) {
+	case MAX_PERFORMANCE:
+	case NOT_AVAILABLE:
+		/*
+		 * if we came here with NOT_AVAILABLE,
+		 * it just means this is the first time we
+		 * have tried to enable - default to max performance,
+		 * and let the user go to lower power modes on request.
+		 */
+		ahci_disable_alpm(ap);
+		return 0;
+	case MIN_POWER:
+		/* configure HBA to enter SLUMBER */
+		asp = PORT_CMD_ASP;
+		break;
+	case MEDIUM_POWER:
+		/* configure HBA to enter PARTIAL */
+		asp = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Disable interrupts on Phy Ready. This keeps us from
+	 * getting woken up due to spurious phy ready interrupts
+	 * TBD - Hot plug should be done via polling now, is
+	 * that even supported?
+	 */
+	pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+	/*
+	 * Set a flag to indicate that we should ignore all PhyRdy
+	 * state changes since these can happen now whenever we
+	 * change link state
+	 */
+	hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+
+	/* get the existing command bits */
+	cmd = readl(port_mmio + PORT_CMD);
+
+	/*
+	 * Set ASP based on Policy
+	 */
+	cmd |= asp;
+
+	/*
+	 * Setting this bit will instruct the HBA to aggressively
+	 * enter a lower power link state when it's appropriate and
+	 * based on the value set above for ASP
+	 */
+	cmd |= PORT_CMD_ALPE;
+
+	/* write out new cmd value */
+	writel(cmd, port_mmio + PORT_CMD);
+	cmd = readl(port_mmio + PORT_CMD);
+
+	/* IPM bits should be set by libata-core */
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static void ahci_power_down(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 cmd, scontrol;
+
+	if (!(hpriv->cap & HOST_CAP_SSS))
+		return;
+
+	/* put device into listen mode, first set PxSCTL.DET to 0 */
+	scontrol = readl(port_mmio + PORT_SCR_CTL);
+	scontrol &= ~0xf;
+	writel(scontrol, port_mmio + PORT_SCR_CTL);
+
+	/* then set PxCMD.SUD to 0 */
+	cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
+	cmd &= ~PORT_CMD_SPIN_UP;
+	writel(cmd, port_mmio + PORT_CMD);
+}
+#endif
+
+static void ahci_start_port(struct ata_port *ap)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ata_link *link;
+	struct ahci_em_priv *emp;
+	ssize_t rc;
+	int i;
+
+	/* enable FIS reception */
+	ahci_start_fis_rx(ap);
+
+	/* enable DMA */
+	ahci_start_engine(ap);
+
+	/* turn on LEDs */
+	if (ap->flags & ATA_FLAG_EM) {
+		ata_for_each_link(link, ap, EDGE) {
+			emp = &pp->em_priv[link->pmp];
+
+			/* EM Transmit bit maybe busy during init */
+			for (i = 0; i < EM_MAX_RETRY; i++) {
+				rc = ahci_transmit_led_message(ap,
+							       emp->led_state,
+							       4);
+				if (rc == -EBUSY)
+					msleep(1);
+				else
+					break;
+			}
+		}
+	}
+
+	if (ap->flags & ATA_FLAG_SW_ACTIVITY)
+		ata_for_each_link(link, ap, EDGE)
+			ahci_init_sw_activity(link);
+
+}
+
+static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
+{
+	int rc;
+
+	/* disable DMA */
+	rc = ahci_stop_engine(ap);
+	if (rc) {
+		*emsg = "failed to stop engine";
+		return rc;
+	}
+
+	/* disable FIS reception */
+	rc = ahci_stop_fis_rx(ap);
+	if (rc) {
+		*emsg = "failed stop FIS RX";
+		return rc;
+	}
+
+	return 0;
+}
+
+int ahci_reset_controller(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 tmp;
+
+	/* we must be in AHCI mode, before using anything
+	 * AHCI-specific, such as HOST_RESET.
+	 */
+	ahci_enable_ahci(mmio);
+
+	/* global controller reset */
+	if (!ahci_skip_host_reset) {
+		tmp = readl(mmio + HOST_CTL);
+		if ((tmp & HOST_RESET) == 0) {
+			writel(tmp | HOST_RESET, mmio + HOST_CTL);
+			readl(mmio + HOST_CTL); /* flush */
+		}
+
+		/*
+		 * to perform host reset, OS should set HOST_RESET
+		 * and poll until this bit is read to be "0".
+		 * reset must complete within 1 second, or
+		 * the hardware should be considered fried.
+		 */
+		tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
+					HOST_RESET, 10, 1000);
+
+		if (tmp & HOST_RESET) {
+			dev_printk(KERN_ERR, host->dev,
+				   "controller reset failed (0x%x)\n", tmp);
+			return -EIO;
+		}
+
+		/* turn on AHCI mode */
+		ahci_enable_ahci(mmio);
+
+		/* Some registers might be cleared on reset.  Restore
+		 * initial values.
+		 */
+		ahci_restore_initial_config(host);
+	} else
+		dev_printk(KERN_INFO, host->dev,
+			   "skipping global host reset\n");
+
+	return 0;
+}
+
+static void ahci_sw_activity(struct ata_link *link)
+{
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+	if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
+		return;
+
+	emp->activity++;
+	if (!timer_pending(&emp->timer))
+		mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
+}
+
+static void ahci_sw_activity_blink(unsigned long arg)
+{
+	struct ata_link *link = (struct ata_link *)arg;
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+	unsigned long led_message = emp->led_state;
+	u32 activity_led_state;
+	unsigned long flags;
+
+	led_message &= EM_MSG_LED_VALUE;
+	led_message |= ap->port_no | (link->pmp << 8);
+
+	/* check to see if we've had activity.  If so,
+	 * toggle state of LED and reset timer.  If not,
+	 * turn LED to desired idle state.
+	 */
+	spin_lock_irqsave(ap->lock, flags);
+	if (emp->saved_activity != emp->activity) {
+		emp->saved_activity = emp->activity;
+		/* get the current LED state */
+		activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
+
+		if (activity_led_state)
+			activity_led_state = 0;
+		else
+			activity_led_state = 1;
+
+		/* clear old state */
+		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+		/* toggle state */
+		led_message |= (activity_led_state << 16);
+		mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
+	} else {
+		/* switch to idle */
+		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
+		if (emp->blink_policy == BLINK_OFF)
+			led_message |= (1 << 16);
+	}
+	spin_unlock_irqrestore(ap->lock, flags);
+	ahci_transmit_led_message(ap, led_message, 4);
+}
+
+static void ahci_init_sw_activity(struct ata_link *link)
+{
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+	/* init activity stats, setup timer */
+	emp->saved_activity = emp->activity = 0;
+	setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
+
+	/* check our blink policy and set flag for link if it's enabled */
+	if (emp->blink_policy)
+		link->flags |= ATA_LFLAG_SW_ACTIVITY;
+}
+
+int ahci_reset_em(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 em_ctl;
+
+	em_ctl = readl(mmio + HOST_EM_CTL);
+	if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
+		return -EINVAL;
+
+	writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
+	return 0;
+}
+
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+					ssize_t size)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 em_ctl;
+	u32 message[] = {0, 0};
+	unsigned long flags;
+	int pmp;
+	struct ahci_em_priv *emp;
+
+	/* get the slot number from the message */
+	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+	if (pmp < EM_MAX_SLOTS)
+		emp = &pp->em_priv[pmp];
+	else
+		return -EINVAL;
+
+	spin_lock_irqsave(ap->lock, flags);
+
+	/*
+	 * if we are still busy transmitting a previous message,
+	 * do not allow
+	 */
+	em_ctl = readl(mmio + HOST_EM_CTL);
+	if (em_ctl & EM_CTL_TM) {
+		spin_unlock_irqrestore(ap->lock, flags);
+		return -EBUSY;
+	}
+
+	/*
+	 * create message header - this is all zero except for
+	 * the message size, which is 4 bytes.
+	 */
+	message[0] |= (4 << 8);
+
+	/* ignore 0:4 of byte zero, fill in port info yourself */
+	message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
+
+	/* write message to EM_LOC */
+	writel(message[0], mmio + hpriv->em_loc);
+	writel(message[1], mmio + hpriv->em_loc+4);
+
+	/* save off new led state for port/slot */
+	emp->led_state = state;
+
+	/*
+	 * tell hardware to transmit the message
+	 */
+	writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+
+	spin_unlock_irqrestore(ap->lock, flags);
+	return size;
+}
+
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ata_link *link;
+	struct ahci_em_priv *emp;
+	int rc = 0;
+
+	ata_for_each_link(link, ap, EDGE) {
+		emp = &pp->em_priv[link->pmp];
+		rc += sprintf(buf, "%lx\n", emp->led_state);
+	}
+	return rc;
+}
+
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+				size_t size)
+{
+	int state;
+	int pmp;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_em_priv *emp;
+
+	state = simple_strtoul(buf, NULL, 0);
+
+	/* get the slot number from the message */
+	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+	if (pmp < EM_MAX_SLOTS)
+		emp = &pp->em_priv[pmp];
+	else
+		return -EINVAL;
+
+	/* mask off the activity bits if we are in sw_activity
+	 * mode, user should turn off sw_activity before setting
+	 * activity led through em_message
+	 */
+	if (emp->blink_policy)
+		state &= ~EM_MSG_LED_VALUE_ACTIVITY;
+
+	return ahci_transmit_led_message(ap, state, size);
+}
+
+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
+{
+	struct ata_link *link = dev->link;
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+	u32 port_led_state = emp->led_state;
+
+	/* save the desired Activity LED behavior */
+	if (val == OFF) {
+		/* clear LFLAG */
+		link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
+
+		/* set the LED to OFF */
+		port_led_state &= EM_MSG_LED_VALUE_OFF;
+		port_led_state |= (ap->port_no | (link->pmp << 8));
+		ahci_transmit_led_message(ap, port_led_state, 4);
+	} else {
+		link->flags |= ATA_LFLAG_SW_ACTIVITY;
+		if (val == BLINK_OFF) {
+			/* set LED to ON for idle */
+			port_led_state &= EM_MSG_LED_VALUE_OFF;
+			port_led_state |= (ap->port_no | (link->pmp << 8));
+			port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
+			ahci_transmit_led_message(ap, port_led_state, 4);
+		}
+	}
+	emp->blink_policy = val;
+	return 0;
+}
+
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
+{
+	struct ata_link *link = dev->link;
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+	/* display the saved value of activity behavior for this
+	 * disk.
+	 */
+	return sprintf(buf, "%d\n", emp->blink_policy);
+}
+
+static void ahci_port_init(struct device *dev, struct ata_port *ap,
+			   int port_no, void __iomem *mmio,
+			   void __iomem *port_mmio)
+{
+	const char *emsg = NULL;
+	int rc;
+	u32 tmp;
+
+	/* make sure port is not active */
+	rc = ahci_deinit_port(ap, &emsg);
+	if (rc)
+		dev_warn(dev, "%s (%d)\n", emsg, rc);
+
+	/* clear SError */
+	tmp = readl(port_mmio + PORT_SCR_ERR);
+	VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
+	writel(tmp, port_mmio + PORT_SCR_ERR);
+
+	/* clear port IRQ */
+	tmp = readl(port_mmio + PORT_IRQ_STAT);
+	VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
+	if (tmp)
+		writel(tmp, port_mmio + PORT_IRQ_STAT);
+
+	writel(1 << port_no, mmio + HOST_IRQ_STAT);
+}
+
+void ahci_init_controller(struct ata_host *host)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	int i;
+	void __iomem *port_mmio;
+	u32 tmp;
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		port_mmio = ahci_port_base(ap);
+		if (ata_port_is_dummy(ap))
+			continue;
+
+		ahci_port_init(host->dev, ap, i, mmio, port_mmio);
+	}
+
+	tmp = readl(mmio + HOST_CTL);
+	VPRINTK("HOST_CTL 0x%x\n", tmp);
+	writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
+	tmp = readl(mmio + HOST_CTL);
+	VPRINTK("HOST_CTL 0x%x\n", tmp);
+}
+
+static void ahci_dev_config(struct ata_device *dev)
+{
+	struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+	if (hpriv->flags & AHCI_HFLAG_SECT255) {
+		dev->max_sectors = 255;
+		ata_dev_printk(dev, KERN_INFO,
+			       "SB600 AHCI: limiting to 255 sectors per cmd\n");
+	}
+}
+
+static unsigned int ahci_dev_classify(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ata_taskfile tf;
+	u32 tmp;
+
+	tmp = readl(port_mmio + PORT_SIG);
+	tf.lbah		= (tmp >> 24)	& 0xff;
+	tf.lbam		= (tmp >> 16)	& 0xff;
+	tf.lbal		= (tmp >> 8)	& 0xff;
+	tf.nsect	= (tmp)		& 0xff;
+
+	return ata_dev_classify(&tf);
+}
+
+static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
+			       u32 opts)
+{
+	dma_addr_t cmd_tbl_dma;
+
+	cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
+
+	pp->cmd_slot[tag].opts = cpu_to_le32(opts);
+	pp->cmd_slot[tag].status = 0;
+	pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
+	pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
+}
+
+int ahci_kick_engine(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+	u32 tmp;
+	int busy, rc;
+
+	/* stop engine */
+	rc = ahci_stop_engine(ap);
+	if (rc)
+		goto out_restart;
+
+	/* need to do CLO?
+	 * always do CLO if PMP is attached (AHCI-1.3 9.2)
+	 */
+	busy = status & (ATA_BUSY | ATA_DRQ);
+	if (!busy && !sata_pmp_attached(ap)) {
+		rc = 0;
+		goto out_restart;
+	}
+
+	if (!(hpriv->cap & HOST_CAP_CLO)) {
+		rc = -EOPNOTSUPP;
+		goto out_restart;
+	}
+
+	/* perform CLO */
+	tmp = readl(port_mmio + PORT_CMD);
+	tmp |= PORT_CMD_CLO;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	rc = 0;
+	tmp = ata_wait_register(port_mmio + PORT_CMD,
+				PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
+	if (tmp & PORT_CMD_CLO)
+		rc = -EIO;
+
+	/* restart engine */
+ out_restart:
+	ahci_start_engine(ap);
+	return rc;
+}
+
+static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
+				struct ata_taskfile *tf, int is_cmd, u16 flags,
+				unsigned long timeout_msec)
+{
+	const u32 cmd_fis_len = 5; /* five dwords */
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u8 *fis = pp->cmd_tbl;
+	u32 tmp;
+
+	/* prep the command */
+	ata_tf_to_fis(tf, pmp, is_cmd, fis);
+	ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
+
+	/* issue & wait */
+	writel(1, port_mmio + PORT_CMD_ISSUE);
+
+	if (timeout_msec) {
+		tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
+					1, timeout_msec);
+		if (tmp & 0x1) {
+			ahci_kick_engine(ap);
+			return -EBUSY;
+		}
+	} else
+		readl(port_mmio + PORT_CMD_ISSUE);	/* flush */
+
+	return 0;
+}
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+		      int pmp, unsigned long deadline,
+		      int (*check_ready)(struct ata_link *link))
+{
+	struct ata_port *ap = link->ap;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	const char *reason = NULL;
+	unsigned long now, msecs;
+	struct ata_taskfile tf;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	/* prepare for SRST (AHCI-1.1 10.4.1) */
+	rc = ahci_kick_engine(ap);
+	if (rc && rc != -EOPNOTSUPP)
+		ata_link_printk(link, KERN_WARNING,
+				"failed to reset engine (errno=%d)\n", rc);
+
+	ata_tf_init(link->device, &tf);
+
+	/* issue the first D2H Register FIS */
+	msecs = 0;
+	now = jiffies;
+	if (time_after(now, deadline))
+		msecs = jiffies_to_msecs(deadline - now);
+
+	tf.ctl |= ATA_SRST;
+	if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
+				 AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
+		rc = -EIO;
+		reason = "1st FIS failed";
+		goto fail;
+	}
+
+	/* spec says at least 5us, but be generous and sleep for 1ms */
+	msleep(1);
+
+	/* issue the second D2H Register FIS */
+	tf.ctl &= ~ATA_SRST;
+	ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
+
+	/* wait for link to become ready */
+	rc = ata_wait_after_reset(link, deadline, check_ready);
+	if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+		/*
+		 * Workaround for cases where link online status can't
+		 * be trusted.  Treat device readiness timeout as link
+		 * offline.
+		 */
+		ata_link_printk(link, KERN_INFO,
+				"device not ready, treating as offline\n");
+		*class = ATA_DEV_NONE;
+	} else if (rc) {
+		/* link occupied, -ENODEV too is an error */
+		reason = "device not ready";
+		goto fail;
+	} else
+		*class = ahci_dev_classify(ap);
+
+	DPRINTK("EXIT, class=%u\n", *class);
+	return 0;
+
+ fail:
+	ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
+	return rc;
+}
+
+int ahci_check_ready(struct ata_link *link)
+{
+	void __iomem *port_mmio = ahci_port_base(link->ap);
+	u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+	return ata_check_ready(status);
+}
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline)
+{
+	int pmp = sata_srst_pmp(link);
+
+	DPRINTK("ENTER\n");
+
+	return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+
+static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+			  unsigned long deadline)
+{
+	const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
+	struct ata_port *ap = link->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+	struct ata_taskfile tf;
+	bool online;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	ahci_stop_engine(ap);
+
+	/* clear D2H reception area to properly wait for D2H FIS */
+	ata_tf_init(link->device, &tf);
+	tf.command = 0x80;
+	ata_tf_to_fis(&tf, 0, 0, d2h_fis);
+
+	rc = sata_link_hardreset(link, timing, deadline, &online,
+				 ahci_check_ready);
+
+	ahci_start_engine(ap);
+
+	if (online)
+		*class = ahci_dev_classify(ap);
+
+	DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
+	return rc;
+}
+
+static void ahci_postreset(struct ata_link *link, unsigned int *class)
+{
+	struct ata_port *ap = link->ap;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 new_tmp, tmp;
+
+	ata_std_postreset(link, class);
+
+	/* Make sure port's ATAPI bit is set appropriately */
+	new_tmp = tmp = readl(port_mmio + PORT_CMD);
+	if (*class == ATA_DEV_ATAPI)
+		new_tmp |= PORT_CMD_ATAPI;
+	else
+		new_tmp &= ~PORT_CMD_ATAPI;
+	if (new_tmp != tmp) {
+		writel(new_tmp, port_mmio + PORT_CMD);
+		readl(port_mmio + PORT_CMD); /* flush */
+	}
+}
+
+static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
+{
+	struct scatterlist *sg;
+	struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
+	unsigned int si;
+
+	VPRINTK("ENTER\n");
+
+	/*
+	 * Next, the S/G list.
+	 */
+	for_each_sg(qc->sg, sg, qc->n_elem, si) {
+		dma_addr_t addr = sg_dma_address(sg);
+		u32 sg_len = sg_dma_len(sg);
+
+		ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
+		ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
+		ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
+	}
+
+	return si;
+}
+
+static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+
+	if (!sata_pmp_attached(ap) || pp->fbs_enabled)
+		return ata_std_qc_defer(qc);
+	else
+		return sata_pmp_qc_defer_cmd_switch(qc);
+}
+
+static void ahci_qc_prep(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ahci_port_priv *pp = ap->private_data;
+	int is_atapi = ata_is_atapi(qc->tf.protocol);
+	void *cmd_tbl;
+	u32 opts;
+	const u32 cmd_fis_len = 5; /* five dwords */
+	unsigned int n_elem;
+
+	/*
+	 * Fill in command table information.  First, the header,
+	 * a SATA Register - Host to Device command FIS.
+	 */
+	cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
+
+	ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
+	if (is_atapi) {
+		memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
+		memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
+	}
+
+	n_elem = 0;
+	if (qc->flags & ATA_QCFLAG_DMAMAP)
+		n_elem = ahci_fill_sg(qc, cmd_tbl);
+
+	/*
+	 * Fill in command slot information.
+	 */
+	opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
+	if (qc->tf.flags & ATA_TFLAG_WRITE)
+		opts |= AHCI_CMD_WRITE;
+	if (is_atapi)
+		opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
+
+	ahci_fill_cmd_slot(pp, qc->tag, opts);
+}
+
+static void ahci_fbs_dec_intr(struct ata_port *ap)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 fbs = readl(port_mmio + PORT_FBS);
+	int retries = 3;
+
+	DPRINTK("ENTER\n");
+	BUG_ON(!pp->fbs_enabled);
+
+	/* time to wait for DEC is not specified by AHCI spec,
+	 * add a retry loop for safety.
+	 */
+	writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS);
+	fbs = readl(port_mmio + PORT_FBS);
+	while ((fbs & PORT_FBS_DEC) && retries--) {
+		udelay(1);
+		fbs = readl(port_mmio + PORT_FBS);
+	}
+
+	if (fbs & PORT_FBS_DEC)
+		dev_printk(KERN_ERR, ap->host->dev,
+			   "failed to clear device error\n");
+}
+
+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ata_eh_info *host_ehi = &ap->link.eh_info;
+	struct ata_link *link = NULL;
+	struct ata_queued_cmd *active_qc;
+	struct ata_eh_info *active_ehi;
+	bool fbs_need_dec = false;
+	u32 serror;
+
+	/* determine active link with error */
+	if (pp->fbs_enabled) {
+		void __iomem *port_mmio = ahci_port_base(ap);
+		u32 fbs = readl(port_mmio + PORT_FBS);
+		int pmp = fbs >> PORT_FBS_DWE_OFFSET;
+
+		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
+		    ata_link_online(&ap->pmp_link[pmp])) {
+			link = &ap->pmp_link[pmp];
+			fbs_need_dec = true;
+		}
+
+	} else
+		ata_for_each_link(link, ap, EDGE)
+			if (ata_link_active(link))
+				break;
+
+	if (!link)
+		link = &ap->link;
+
+	active_qc = ata_qc_from_tag(ap, link->active_tag);
+	active_ehi = &link->eh_info;
+
+	/* record irq stat */
+	ata_ehi_clear_desc(host_ehi);
+	ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
+
+	/* AHCI needs SError cleared; otherwise, it might lock up */
+	ahci_scr_read(&ap->link, SCR_ERROR, &serror);
+	ahci_scr_write(&ap->link, SCR_ERROR, serror);
+	host_ehi->serror |= serror;
+
+	/* some controllers set IRQ_IF_ERR on device errors, ignore it */
+	if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
+		irq_stat &= ~PORT_IRQ_IF_ERR;
+
+	if (irq_stat & PORT_IRQ_TF_ERR) {
+		/* If qc is active, charge it; otherwise, the active
+		 * link.  There's no active qc on NCQ errors.  It will
+		 * be determined by EH by reading log page 10h.
+		 */
+		if (active_qc)
+			active_qc->err_mask |= AC_ERR_DEV;
+		else
+			active_ehi->err_mask |= AC_ERR_DEV;
+
+		if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
+			host_ehi->serror &= ~SERR_INTERNAL;
+	}
+
+	if (irq_stat & PORT_IRQ_UNK_FIS) {
+		u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
+
+		active_ehi->err_mask |= AC_ERR_HSM;
+		active_ehi->action |= ATA_EH_RESET;
+		ata_ehi_push_desc(active_ehi,
+				  "unknown FIS %08x %08x %08x %08x" ,
+				  unk[0], unk[1], unk[2], unk[3]);
+	}
+
+	if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
+		active_ehi->err_mask |= AC_ERR_HSM;
+		active_ehi->action |= ATA_EH_RESET;
+		ata_ehi_push_desc(active_ehi, "incorrect PMP");
+	}
+
+	if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
+		host_ehi->err_mask |= AC_ERR_HOST_BUS;
+		host_ehi->action |= ATA_EH_RESET;
+		ata_ehi_push_desc(host_ehi, "host bus error");
+	}
+
+	if (irq_stat & PORT_IRQ_IF_ERR) {
+		if (fbs_need_dec)
+			active_ehi->err_mask |= AC_ERR_DEV;
+		else {
+			host_ehi->err_mask |= AC_ERR_ATA_BUS;
+			host_ehi->action |= ATA_EH_RESET;
+		}
+
+		ata_ehi_push_desc(host_ehi, "interface fatal error");
+	}
+
+	if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
+		ata_ehi_hotplugged(host_ehi);
+		ata_ehi_push_desc(host_ehi, "%s",
+			irq_stat & PORT_IRQ_CONNECT ?
+			"connection status changed" : "PHY RDY changed");
+	}
+
+	/* okay, let's hand over to EH */
+
+	if (irq_stat & PORT_IRQ_FREEZE)
+		ata_port_freeze(ap);
+	else if (fbs_need_dec) {
+		ata_link_abort(link);
+		ahci_fbs_dec_intr(ap);
+	} else
+		ata_port_abort(ap);
+}
+
+static void ahci_port_intr(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	struct ahci_port_priv *pp = ap->private_data;
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
+	u32 status, qc_active;
+	int rc;
+
+	status = readl(port_mmio + PORT_IRQ_STAT);
+	writel(status, port_mmio + PORT_IRQ_STAT);
+
+	/* ignore BAD_PMP while resetting */
+	if (unlikely(resetting))
+		status &= ~PORT_IRQ_BAD_PMP;
+
+	/* If we are getting PhyRdy, this is
+	 * just a power state change, we should
+	 * clear out this, plus the PhyRdy/Comm
+	 * Wake bits from Serror
+	 */
+	if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
+		(status & PORT_IRQ_PHYRDY)) {
+		status &= ~PORT_IRQ_PHYRDY;
+		ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+	}
+
+	if (unlikely(status & PORT_IRQ_ERROR)) {
+		ahci_error_intr(ap, status);
+		return;
+	}
+
+	if (status & PORT_IRQ_SDB_FIS) {
+		/* If SNotification is available, leave notification
+		 * handling to sata_async_notification().  If not,
+		 * emulate it by snooping SDB FIS RX area.
+		 *
+		 * Snooping FIS RX area is probably cheaper than
+		 * poking SNotification but some constrollers which
+		 * implement SNotification, ICH9 for example, don't
+		 * store AN SDB FIS into receive area.
+		 */
+		if (hpriv->cap & HOST_CAP_SNTF)
+			sata_async_notification(ap);
+		else {
+			/* If the 'N' bit in word 0 of the FIS is set,
+			 * we just received asynchronous notification.
+			 * Tell libata about it.
+			 *
+			 * Lack of SNotification should not appear in
+			 * ahci 1.2, so the workaround is unnecessary
+			 * when FBS is enabled.
+			 */
+			if (pp->fbs_enabled)
+				WARN_ON_ONCE(1);
+			else {
+				const __le32 *f = pp->rx_fis + RX_FIS_SDB;
+				u32 f0 = le32_to_cpu(f[0]);
+				if (f0 & (1 << 15))
+					sata_async_notification(ap);
+			}
+		}
+	}
+
+	/* pp->active_link is valid iff any command is in flight */
+	if (ap->qc_active && pp->active_link->sactive)
+		qc_active = readl(port_mmio + PORT_SCR_ACT);
+	else
+		qc_active = readl(port_mmio + PORT_CMD_ISSUE);
+
+	rc = ata_qc_complete_multiple(ap, qc_active);
+
+	/* while resetting, invalid completions are expected */
+	if (unlikely(rc < 0 && !resetting)) {
+		ehi->err_mask |= AC_ERR_HSM;
+		ehi->action |= ATA_EH_RESET;
+		ata_port_freeze(ap);
+	}
+}
+
+irqreturn_t ahci_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct ahci_host_priv *hpriv;
+	unsigned int i, handled = 0;
+	void __iomem *mmio;
+	u32 irq_stat, irq_masked;
+
+	VPRINTK("ENTER\n");
+
+	hpriv = host->private_data;
+	mmio = hpriv->mmio;
+
+	/* sigh.  0xffffffff is a valid return from h/w */
+	irq_stat = readl(mmio + HOST_IRQ_STAT);
+	if (!irq_stat)
+		return IRQ_NONE;
+
+	irq_masked = irq_stat & hpriv->port_map;
+
+	spin_lock(&host->lock);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap;
+
+		if (!(irq_masked & (1 << i)))
+			continue;
+
+		ap = host->ports[i];
+		if (ap) {
+			ahci_port_intr(ap);
+			VPRINTK("port %u\n", i);
+		} else {
+			VPRINTK("port %u (no irq)\n", i);
+			if (ata_ratelimit())
+				dev_printk(KERN_WARNING, host->dev,
+					"interrupt on disabled port %u\n", i);
+		}
+
+		handled = 1;
+	}
+
+	/* HOST_IRQ_STAT behaves as level triggered latch meaning that
+	 * it should be cleared after all the port events are cleared;
+	 * otherwise, it will raise a spurious interrupt after each
+	 * valid one.  Please read section 10.6.2 of ahci 1.1 for more
+	 * information.
+	 *
+	 * Also, use the unmasked value to clear interrupt as spurious
+	 * pending event on a dummy port might cause screaming IRQ.
+	 */
+	writel(irq_stat, mmio + HOST_IRQ_STAT);
+
+	spin_unlock(&host->lock);
+
+	VPRINTK("EXIT\n");
+
+	return IRQ_RETVAL(handled);
+}
+
+static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_port_priv *pp = ap->private_data;
+
+	/* Keep track of the currently active link.  It will be used
+	 * in completion path to determine whether NCQ phase is in
+	 * progress.
+	 */
+	pp->active_link = qc->dev->link;
+
+	if (qc->tf.protocol == ATA_PROT_NCQ)
+		writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
+
+	if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
+		u32 fbs = readl(port_mmio + PORT_FBS);
+		fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
+		fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+		writel(fbs, port_mmio + PORT_FBS);
+		pp->fbs_last_dev = qc->dev->link->pmp;
+	}
+
+	writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
+
+	ahci_sw_activity(qc->dev->link);
+
+	return 0;
+}
+
+static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
+{
+	struct ahci_port_priv *pp = qc->ap->private_data;
+	u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
+
+	if (pp->fbs_enabled)
+		d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ;
+
+	ata_tf_from_fis(d2h_fis, &qc->result_tf);
+	return true;
+}
+
+static void ahci_freeze(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+
+	/* turn IRQ off */
+	writel(0, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_thaw(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp;
+	struct ahci_port_priv *pp = ap->private_data;
+
+	/* clear IRQ */
+	tmp = readl(port_mmio + PORT_IRQ_STAT);
+	writel(tmp, port_mmio + PORT_IRQ_STAT);
+	writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
+
+	/* turn IRQ back on */
+	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_error_handler(struct ata_port *ap)
+{
+	if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
+		/* restart engine */
+		ahci_stop_engine(ap);
+		ahci_start_engine(ap);
+	}
+
+	sata_pmp_error_handler(ap);
+}
+
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	/* make DMA engine forget about the failed command */
+	if (qc->flags & ATA_QCFLAG_FAILED)
+		ahci_kick_engine(ap);
+}
+
+static void ahci_enable_fbs(struct ata_port *ap)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 fbs;
+	int rc;
+
+	if (!pp->fbs_supported)
+		return;
+
+	fbs = readl(port_mmio + PORT_FBS);
+	if (fbs & PORT_FBS_EN) {
+		pp->fbs_enabled = true;
+		pp->fbs_last_dev = -1; /* initialization */
+		return;
+	}
+
+	rc = ahci_stop_engine(ap);
+	if (rc)
+		return;
+
+	writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
+	fbs = readl(port_mmio + PORT_FBS);
+	if (fbs & PORT_FBS_EN) {
+		dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n");
+		pp->fbs_enabled = true;
+		pp->fbs_last_dev = -1; /* initialization */
+	} else
+		dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n");
+
+	ahci_start_engine(ap);
+}
+
+static void ahci_disable_fbs(struct ata_port *ap)
+{
+	struct ahci_port_priv *pp = ap->private_data;
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 fbs;
+	int rc;
+
+	if (!pp->fbs_supported)
+		return;
+
+	fbs = readl(port_mmio + PORT_FBS);
+	if ((fbs & PORT_FBS_EN) == 0) {
+		pp->fbs_enabled = false;
+		return;
+	}
+
+	rc = ahci_stop_engine(ap);
+	if (rc)
+		return;
+
+	writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS);
+	fbs = readl(port_mmio + PORT_FBS);
+	if (fbs & PORT_FBS_EN)
+		dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n");
+	else {
+		dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n");
+		pp->fbs_enabled = false;
+	}
+
+	ahci_start_engine(ap);
+}
+
+static void ahci_pmp_attach(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_port_priv *pp = ap->private_data;
+	u32 cmd;
+
+	cmd = readl(port_mmio + PORT_CMD);
+	cmd |= PORT_CMD_PMP;
+	writel(cmd, port_mmio + PORT_CMD);
+
+	ahci_enable_fbs(ap);
+
+	pp->intr_mask |= PORT_IRQ_BAD_PMP;
+	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_pmp_detach(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	struct ahci_port_priv *pp = ap->private_data;
+	u32 cmd;
+
+	ahci_disable_fbs(ap);
+
+	cmd = readl(port_mmio + PORT_CMD);
+	cmd &= ~PORT_CMD_PMP;
+	writel(cmd, port_mmio + PORT_CMD);
+
+	pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
+	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+}
+
+static int ahci_port_resume(struct ata_port *ap)
+{
+	ahci_power_up(ap);
+	ahci_start_port(ap);
+
+	if (sata_pmp_attached(ap))
+		ahci_pmp_attach(ap);
+	else
+		ahci_pmp_detach(ap);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
+{
+	const char *emsg = NULL;
+	int rc;
+
+	rc = ahci_deinit_port(ap, &emsg);
+	if (rc == 0)
+		ahci_power_down(ap);
+	else {
+		ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
+		ahci_start_port(ap);
+	}
+
+	return rc;
+}
+#endif
+
+static int ahci_port_start(struct ata_port *ap)
+{
+	struct ahci_host_priv *hpriv = ap->host->private_data;
+	struct device *dev = ap->host->dev;
+	struct ahci_port_priv *pp;
+	void *mem;
+	dma_addr_t mem_dma;
+	size_t dma_sz, rx_fis_sz;
+
+	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		return -ENOMEM;
+
+	/* check FBS capability */
+	if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) {
+		void __iomem *port_mmio = ahci_port_base(ap);
+		u32 cmd = readl(port_mmio + PORT_CMD);
+		if (cmd & PORT_CMD_FBSCP)
+			pp->fbs_supported = true;
+		else
+			dev_printk(KERN_WARNING, dev,
+				   "The port is not capable of FBS\n");
+	}
+
+	if (pp->fbs_supported) {
+		dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ;
+		rx_fis_sz = AHCI_RX_FIS_SZ * 16;
+	} else {
+		dma_sz = AHCI_PORT_PRIV_DMA_SZ;
+		rx_fis_sz = AHCI_RX_FIS_SZ;
+	}
+
+	mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
+	memset(mem, 0, dma_sz);
+
+	/*
+	 * First item in chunk of DMA memory: 32-slot command table,
+	 * 32 bytes each in size
+	 */
+	pp->cmd_slot = mem;
+	pp->cmd_slot_dma = mem_dma;
+
+	mem += AHCI_CMD_SLOT_SZ;
+	mem_dma += AHCI_CMD_SLOT_SZ;
+
+	/*
+	 * Second item: Received-FIS area
+	 */
+	pp->rx_fis = mem;
+	pp->rx_fis_dma = mem_dma;
+
+	mem += rx_fis_sz;
+	mem_dma += rx_fis_sz;
+
+	/*
+	 * Third item: data area for storing a single command
+	 * and its scatter-gather table
+	 */
+	pp->cmd_tbl = mem;
+	pp->cmd_tbl_dma = mem_dma;
+
+	/*
+	 * Save off initial list of interrupts to be enabled.
+	 * This could be changed later
+	 */
+	pp->intr_mask = DEF_PORT_IRQ;
+
+	ap->private_data = pp;
+
+	/* engage engines, captain */
+	return ahci_port_resume(ap);
+}
+
+static void ahci_port_stop(struct ata_port *ap)
+{
+	const char *emsg = NULL;
+	int rc;
+
+	/* de-initialize port */
+	rc = ahci_deinit_port(ap, &emsg);
+	if (rc)
+		ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
+}
+
+void ahci_print_info(struct ata_host *host, const char *scc_s)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+	u32 vers, cap, cap2, impl, speed;
+	const char *speed_s;
+
+	vers = readl(mmio + HOST_VERSION);
+	cap = hpriv->cap;
+	cap2 = hpriv->cap2;
+	impl = hpriv->port_map;
+
+	speed = (cap >> 20) & 0xf;
+	if (speed == 1)
+		speed_s = "1.5";
+	else if (speed == 2)
+		speed_s = "3";
+	else if (speed == 3)
+		speed_s = "6";
+	else
+		speed_s = "?";
+
+	dev_info(host->dev,
+		"AHCI %02x%02x.%02x%02x "
+		"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
+		,
+
+		(vers >> 24) & 0xff,
+		(vers >> 16) & 0xff,
+		(vers >> 8) & 0xff,
+		vers & 0xff,
+
+		((cap >> 8) & 0x1f) + 1,
+		(cap & 0x1f) + 1,
+		speed_s,
+		impl,
+		scc_s);
+
+	dev_info(host->dev,
+		"flags: "
+		"%s%s%s%s%s%s%s"
+		"%s%s%s%s%s%s%s"
+		"%s%s%s%s%s%s\n"
+		,
+
+		cap & HOST_CAP_64 ? "64bit " : "",
+		cap & HOST_CAP_NCQ ? "ncq " : "",
+		cap & HOST_CAP_SNTF ? "sntf " : "",
+		cap & HOST_CAP_MPS ? "ilck " : "",
+		cap & HOST_CAP_SSS ? "stag " : "",
+		cap & HOST_CAP_ALPM ? "pm " : "",
+		cap & HOST_CAP_LED ? "led " : "",
+		cap & HOST_CAP_CLO ? "clo " : "",
+		cap & HOST_CAP_ONLY ? "only " : "",
+		cap & HOST_CAP_PMP ? "pmp " : "",
+		cap & HOST_CAP_FBS ? "fbs " : "",
+		cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+		cap & HOST_CAP_SSC ? "slum " : "",
+		cap & HOST_CAP_PART ? "part " : "",
+		cap & HOST_CAP_CCC ? "ccc " : "",
+		cap & HOST_CAP_EMS ? "ems " : "",
+		cap & HOST_CAP_SXS ? "sxs " : "",
+		cap2 & HOST_CAP2_APST ? "apst " : "",
+		cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+		cap2 & HOST_CAP2_BOH ? "boh " : ""
+		);
+}
+
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+			  struct ata_port_info *pi)
+{
+	u8 messages;
+	void __iomem *mmio = hpriv->mmio;
+	u32 em_loc = readl(mmio + HOST_EM_LOC);
+	u32 em_ctl = readl(mmio + HOST_EM_CTL);
+
+	if (!ahci_em_messages || !(hpriv->cap & HOST_CAP_EMS))
+		return;
+
+	messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
+
+	/* we only support LED message type right now */
+	if ((messages & 0x01) && (ahci_em_messages == 1)) {
+		/* store em_loc */
+		hpriv->em_loc = ((em_loc >> 16) * 4);
+		pi->flags |= ATA_FLAG_EM;
+		if (!(em_ctl & EM_CTL_ALHD))
+			pi->flags |= ATA_FLAG_SW_ACTIVITY;
+	}
+}
diff --git a/drivers/ata/libahci.h b/drivers/ata/libahci.h
new file mode 100644
index 0000000..60bce4e
--- /dev/null
+++ b/drivers/ata/libahci.h
@@ -0,0 +1,330 @@
+/*
+ *  ahci.c - AHCI SATA low-level routines
+ *
+ *  Maintained by:  Jeff Garzik <jgarzik@pobox.com>
+ *    		    Please ALWAYS copy linux-ide@vger.kernel.org
+ *		    on emails.
+ *
+ *  Copyright 2004-2005 Red Hat, Inc.
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * AHCI hardware documentation:
+ * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
+ * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
+ *
+ */
+
+#ifndef _LIBAHCI_H
+#define _LIBAHCI_H
+
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE              0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT           0x0000000f
+#define EM_MSG_LED_PMP_SLOT           0x0000ff00
+#define EM_MSG_LED_VALUE              0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
+#define EM_MSG_LED_VALUE_OFF          0xfff80000
+#define EM_MSG_LED_VALUE_ON           0x00010000
+
+enum {
+	AHCI_MAX_PORTS		= 32,
+	AHCI_MAX_SG		= 168, /* hardware max is 64K */
+	AHCI_DMA_BOUNDARY	= 0xffffffff,
+	AHCI_MAX_CMDS		= 32,
+	AHCI_CMD_SZ		= 32,
+	AHCI_CMD_SLOT_SZ	= AHCI_MAX_CMDS * AHCI_CMD_SZ,
+	AHCI_RX_FIS_SZ		= 256,
+	AHCI_CMD_TBL_CDB	= 0x40,
+	AHCI_CMD_TBL_HDR_SZ	= 0x80,
+	AHCI_CMD_TBL_SZ		= AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
+	AHCI_CMD_TBL_AR_SZ	= AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
+	AHCI_PORT_PRIV_DMA_SZ	= AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
+				  AHCI_RX_FIS_SZ,
+	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
+					  AHCI_CMD_TBL_AR_SZ +
+					  (AHCI_RX_FIS_SZ * 16),
+	AHCI_IRQ_ON_SG		= (1 << 31),
+	AHCI_CMD_ATAPI		= (1 << 5),
+	AHCI_CMD_WRITE		= (1 << 6),
+	AHCI_CMD_PREFETCH	= (1 << 7),
+	AHCI_CMD_RESET		= (1 << 8),
+	AHCI_CMD_CLR_BUSY	= (1 << 10),
+
+	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
+	RX_FIS_SDB		= 0x58, /* offset of SDB FIS data */
+	RX_FIS_UNK		= 0x60, /* offset of Unknown FIS data */
+
+	/* global controller registers */
+	HOST_CAP		= 0x00, /* host capabilities */
+	HOST_CTL		= 0x04, /* global host control */
+	HOST_IRQ_STAT		= 0x08, /* interrupt status */
+	HOST_PORTS_IMPL		= 0x0c, /* bitmap of implemented ports */
+	HOST_VERSION		= 0x10, /* AHCI spec. version compliancy */
+	HOST_EM_LOC		= 0x1c, /* Enclosure Management location */
+	HOST_EM_CTL		= 0x20, /* Enclosure Management Control */
+	HOST_CAP2		= 0x24, /* host capabilities, extended */
+
+	/* HOST_CTL bits */
+	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
+	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
+	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
+
+	/* HOST_CAP bits */
+	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
+	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
+	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
+	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
+	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
+	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
+	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
+	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
+	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
+	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
+	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
+	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
+	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
+	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
+	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
+	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
+	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
+
+	/* HOST_CAP2 bits */
+	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
+	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
+	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
+
+	/* registers for each SATA port */
+	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
+	PORT_LST_ADDR_HI	= 0x04, /* command list DMA addr hi */
+	PORT_FIS_ADDR		= 0x08, /* FIS rx buf addr */
+	PORT_FIS_ADDR_HI	= 0x0c, /* FIS rx buf addr hi */
+	PORT_IRQ_STAT		= 0x10, /* interrupt status */
+	PORT_IRQ_MASK		= 0x14, /* interrupt enable/disable mask */
+	PORT_CMD		= 0x18, /* port command */
+	PORT_TFDATA		= 0x20,	/* taskfile data */
+	PORT_SIG		= 0x24,	/* device TF signature */
+	PORT_CMD_ISSUE		= 0x38, /* command issue */
+	PORT_SCR_STAT		= 0x28, /* SATA phy register: SStatus */
+	PORT_SCR_CTL		= 0x2c, /* SATA phy register: SControl */
+	PORT_SCR_ERR		= 0x30, /* SATA phy register: SError */
+	PORT_SCR_ACT		= 0x34, /* SATA phy register: SActive */
+	PORT_SCR_NTF		= 0x3c, /* SATA phy register: SNotification */
+	PORT_FBS		= 0x40, /* FIS-based Switching */
+
+	/* PORT_IRQ_{STAT,MASK} bits */
+	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
+	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
+	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
+	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
+	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
+	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
+	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
+	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
+
+	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
+	PORT_IRQ_DEV_ILCK	= (1 << 7), /* device interlock */
+	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
+	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
+	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
+	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
+	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
+	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
+	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
+
+	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
+				  PORT_IRQ_IF_ERR |
+				  PORT_IRQ_CONNECT |
+				  PORT_IRQ_PHYRDY |
+				  PORT_IRQ_UNK_FIS |
+				  PORT_IRQ_BAD_PMP,
+	PORT_IRQ_ERROR		= PORT_IRQ_FREEZE |
+				  PORT_IRQ_TF_ERR |
+				  PORT_IRQ_HBUS_DATA_ERR,
+	DEF_PORT_IRQ		= PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
+				  PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
+				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
+
+	/* PORT_CMD bits */
+	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
+	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
+	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
+	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
+	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
+	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
+	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
+	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
+	PORT_CMD_CLO		= (1 << 3), /* Command list override */
+	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
+	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
+	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
+
+	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
+	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
+	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
+	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
+
+	PORT_FBS_DWE_OFFSET	= 16, /* FBS device with error offset */
+	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
+	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
+	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
+	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
+	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
+	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
+
+	/* hpriv->flags bits */
+	AHCI_HFLAG_NO_NCQ		= (1 << 0),
+	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
+	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
+	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
+	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
+	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
+	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
+	AHCI_HFLAG_NO_HOTPLUG		= (1 << 7), /* ignore PxSERR.DIAG.N */
+	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
+	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
+	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
+	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
+							link offline */
+	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
+
+	/* ap->flags bits */
+
+	AHCI_FLAG_COMMON		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+					  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+					  ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
+					  ATA_FLAG_IPM,
+
+	ICH_MAP				= 0x90, /* ICH MAP register */
+
+	/* em constants */
+	EM_MAX_SLOTS			= 8,
+	EM_MAX_RETRY			= 5,
+
+	/* em_ctl bits */
+	EM_CTL_RST			= (1 << 9), /* Reset */
+	EM_CTL_TM			= (1 << 8), /* Transmit Message */
+	EM_CTL_ALHD			= (1 << 26), /* Activity LED */
+};
+
+struct ahci_cmd_hdr {
+	__le32			opts;
+	__le32			status;
+	__le32			tbl_addr;
+	__le32			tbl_addr_hi;
+	__le32			reserved[4];
+};
+
+struct ahci_sg {
+	__le32			addr;
+	__le32			addr_hi;
+	__le32			reserved;
+	__le32			flags_size;
+};
+
+struct ahci_em_priv {
+	enum sw_activity blink_policy;
+	struct timer_list timer;
+	unsigned long saved_activity;
+	unsigned long activity;
+	unsigned long led_state;
+};
+
+struct ahci_port_priv {
+	struct ata_link		*active_link;
+	struct ahci_cmd_hdr	*cmd_slot;
+	dma_addr_t		cmd_slot_dma;
+	void			*cmd_tbl;
+	dma_addr_t		cmd_tbl_dma;
+	void			*rx_fis;
+	dma_addr_t		rx_fis_dma;
+	/* for NCQ spurious interrupt analysis */
+	unsigned int		ncq_saw_d2h:1;
+	unsigned int		ncq_saw_dmas:1;
+	unsigned int		ncq_saw_sdb:1;
+	u32 			intr_mask;	/* interrupts to enable */
+	bool			fbs_supported;	/* set iff FBS is supported */
+	bool			fbs_enabled;	/* set iff FBS is enabled */
+	int			fbs_last_dev;	/* save FBS.DEV of last FIS */
+	/* enclosure management info per PM slot */
+	struct ahci_em_priv	em_priv[EM_MAX_SLOTS];
+};
+
+struct ahci_host_priv {
+	void __iomem *		mmio;		/* bus-independant mem map */
+	unsigned int		flags;		/* AHCI_HFLAG_* */
+	u32			cap;		/* cap to use */
+	u32			cap2;		/* cap2 to use */
+	u32			port_map;	/* port map to use */
+	u32			saved_cap;	/* saved initial cap */
+	u32			saved_cap2;	/* saved initial cap2 */
+	u32			saved_port_map;	/* saved initial port_map */
+	u32 			em_loc; /* enclosure management location */
+};
+
+extern int ahci_em_messages;
+extern int ahci_ignore_sss;
+
+extern struct scsi_host_template ahci_sht;
+extern struct ata_port_operations ahci_ops;
+
+void ahci_save_initial_config(struct device *dev,
+			      struct ahci_host_priv *hpriv,
+			      unsigned int force_port_map,
+			      unsigned int mask_port_map);
+void ahci_init_controller(struct ata_host *host);
+int ahci_reset_controller(struct ata_host *host);
+
+int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+		      int pmp, unsigned long deadline,
+		      int (*check_ready)(struct ata_link *link));
+
+int ahci_stop_engine(struct ata_port *ap);
+void ahci_start_engine(struct ata_port *ap);
+int ahci_check_ready(struct ata_link *link);
+int ahci_kick_engine(struct ata_port *ap);
+void ahci_set_em_messages(struct ahci_host_priv *hpriv,
+			  struct ata_port_info *pi);
+int ahci_reset_em(struct ata_host *host);
+irqreturn_t ahci_interrupt(int irq, void *dev_instance);
+void ahci_print_info(struct ata_host *host, const char *scc_s);
+
+static inline void __iomem *__ahci_port_base(struct ata_host *host,
+					     unsigned int port_no)
+{
+	struct ahci_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->mmio;
+
+	return mmio + 0x100 + (port_no * 0x80);
+}
+
+static inline void __iomem *ahci_port_base(struct ata_port *ap)
+{
+	return __ahci_port_base(ap->host, ap->port_no);
+}
+
+static inline int ahci_nr_ports(u32 cap)
+{
+	return (cap & 0x1f) + 1;
+}
+
+#endif /* _LIBAHCI_H */
-- 
1.7.0

[PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module

[Anton Vorontsov]

This is needed for non-PCI drivers that will be added soon.

Since the symbols are exported now, libahci and ahci can be built as
a separate modules.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/Kconfig   |    8 +++++++-
 drivers/ata/Makefile  |    3 ++-
 drivers/ata/libahci.c |   20 ++++++++++++++++++++
 3 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 01c52c4..365a9da 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -59,12 +59,18 @@ config SATA_PMP
 
 config SATA_AHCI
 	tristate "AHCI SATA support"
-	depends on PCI
 	help
 	  This option enables support for AHCI Serial ATA.
 
 	  If unsure, say N.
 
+config SATA_AHCI_PCI
+	tristate "PCI AHCI SATA support"
+	depends on SATA_AHCI && PCI
+	default y
+	help
+	  This option enables support for PCI AHCI Serial ATA controllers.
+
 config SATA_SIL24
 	tristate "Silicon Image 3124/3132 SATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 75e3abd..a438cef 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,7 +1,8 @@
 
 obj-$(CONFIG_ATA)		+= libata.o
 
-obj-$(CONFIG_SATA_AHCI)		+= libahci.o ahci.o
+obj-$(CONFIG_SATA_AHCI)		+= libahci.o
+obj-$(CONFIG_SATA_AHCI_PCI)	+= ahci.o
 obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
 obj-$(CONFIG_ATA_PIIX)		+= ata_piix.o
 obj-$(CONFIG_SATA_PROMISE)	+= sata_promise.o
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 3ec32ee..d2eacc4 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -47,6 +47,7 @@
 
 static int ahci_skip_host_reset;
 int ahci_ignore_sss;
+EXPORT_SYMBOL_GPL(ahci_ignore_sss);
 
 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
@@ -137,6 +138,7 @@ struct scsi_host_template ahci_sht = {
 	.shost_attrs		= ahci_shost_attrs,
 	.sdev_attrs		= ahci_sdev_attrs,
 };
+EXPORT_SYMBOL_GPL(ahci_sht);
 
 struct ata_port_operations ahci_ops = {
 	.inherits		= &sata_pmp_port_ops,
@@ -174,8 +176,10 @@ struct ata_port_operations ahci_ops = {
 	.port_start		= ahci_port_start,
 	.port_stop		= ahci_port_stop,
 };
+EXPORT_SYMBOL_GPL(ahci_ops);
 
 int ahci_em_messages = 1;
+EXPORT_SYMBOL_GPL(ahci_em_messages);
 module_param(ahci_em_messages, int, 0444);
 /* add other LED protocol types when they become supported */
 MODULE_PARM_DESC(ahci_em_messages,
@@ -369,6 +373,7 @@ void ahci_save_initial_config(struct device *dev,
 	hpriv->cap2 = cap2;
 	hpriv->port_map = port_map;
 }
+EXPORT_SYMBOL_GPL(ahci_save_initial_config);
 
 /**
  *	ahci_restore_initial_config - Restore initial config
@@ -443,6 +448,7 @@ void ahci_start_engine(struct ata_port *ap)
 	writel(tmp, port_mmio + PORT_CMD);
 	readl(port_mmio + PORT_CMD); /* flush */
 }
+EXPORT_SYMBOL_GPL(ahci_start_engine);
 
 int ahci_stop_engine(struct ata_port *ap)
 {
@@ -467,6 +473,7 @@ int ahci_stop_engine(struct ata_port *ap)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ahci_stop_engine);
 
 static void ahci_start_fis_rx(struct ata_port *ap)
 {
@@ -784,6 +791,7 @@ int ahci_reset_controller(struct ata_host *host)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ahci_reset_controller);
 
 static void ahci_sw_activity(struct ata_link *link)
 {
@@ -871,6 +879,7 @@ int ahci_reset_em(struct ata_host *host)
 	writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ahci_reset_em);
 
 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 					ssize_t size)
@@ -1064,6 +1073,7 @@ void ahci_init_controller(struct ata_host *host)
 	tmp = readl(mmio + HOST_CTL);
 	VPRINTK("HOST_CTL 0x%x\n", tmp);
 }
+EXPORT_SYMBOL_GPL(ahci_init_controller);
 
 static void ahci_dev_config(struct ata_device *dev)
 {
@@ -1147,6 +1157,7 @@ int ahci_kick_engine(struct ata_port *ap)
 	ahci_start_engine(ap);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ahci_kick_engine);
 
 static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
 				struct ata_taskfile *tf, int is_cmd, u16 flags,
@@ -1253,6 +1264,7 @@ int ahci_check_ready(struct ata_link *link)
 
 	return ata_check_ready(status);
 }
+EXPORT_SYMBOL_GPL(ahci_check_ready);
 
 static int ahci_softreset(struct ata_link *link, unsigned int *class,
 			  unsigned long deadline)
@@ -1263,6 +1275,7 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class,
 
 	return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
 }
+EXPORT_SYMBOL_GPL(ahci_do_softreset);
 
 static int ahci_hardreset(struct ata_link *link, unsigned int *class,
 			  unsigned long deadline)
@@ -1665,6 +1678,7 @@ irqreturn_t ahci_interrupt(int irq, void *dev_instance)
 
 	return IRQ_RETVAL(handled);
 }
+EXPORT_SYMBOL_GPL(ahci_interrupt);
 
 static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
 {
@@ -2034,6 +2048,7 @@ void ahci_print_info(struct ata_host *host, const char *scc_s)
 		cap2 & HOST_CAP2_BOH ? "boh " : ""
 		);
 }
+EXPORT_SYMBOL_GPL(ahci_print_info);
 
 void ahci_set_em_messages(struct ahci_host_priv *hpriv,
 			  struct ata_port_info *pi)
@@ -2057,3 +2072,8 @@ void ahci_set_em_messages(struct ahci_host_priv *hpriv,
 			pi->flags |= ATA_FLAG_SW_ACTIVITY;
 	}
 }
+EXPORT_SYMBOL_GPL(ahci_set_em_messages);
+
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_DESCRIPTION("AHCI SATA low-level routines");
+MODULE_LICENSE("GPL");
-- 
1.7.0

[PATCH 11/11] ahci: Add platform driver

[Anton Vorontsov]

This can be used for AHCI-compatible interfaces implemented inside
System-On-Chip solutions, or AHCI devices connected via localbus.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/ata/Kconfig           |    9 ++
 drivers/ata/Makefile          |    1 +
 drivers/ata/ahci_platform.c   |  191 +++++++++++++++++++++++++++++++++++++++++
 include/linux/ahci_platform.h |   29 ++++++
 4 files changed, 230 insertions(+), 0 deletions(-)
 create mode 100644 drivers/ata/ahci_platform.c
 create mode 100644 include/linux/ahci_platform.h

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 365a9da..980a40a 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -71,6 +71,15 @@ config SATA_AHCI_PCI
 	help
 	  This option enables support for PCI AHCI Serial ATA controllers.
 
+config SATA_AHCI_PLATFORM
+	tristate "Platform AHCI SATA support"
+	depends on SATA_AHCI
+	help
+	  This option enables support for Platform AHCI Serial ATA
+	  controllers.
+
+	  If unsure, say N.
+
 config SATA_SIL24
 	tristate "Silicon Image 3124/3132 SATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index a438cef..e235321 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_ATA)		+= libata.o
 
 obj-$(CONFIG_SATA_AHCI)		+= libahci.o
 obj-$(CONFIG_SATA_AHCI_PCI)	+= ahci.o
+obj-$(CONFIG_SATA_AHCI_PLATFORM)+= ahci_platform.o
 obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
 obj-$(CONFIG_ATA_PIIX)		+= ata_piix.o
 obj-$(CONFIG_SATA_PROMISE)	+= sata_promise.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
new file mode 100644
index 0000000..34f7b09
--- /dev/null
+++ b/drivers/ata/ahci_platform.c
@@ -0,0 +1,191 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ahci_platform.h>
+#include "libahci.h"
+
+static int __init ahci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ahci_platform_data *pdata = pdev->dev.platform_data;
+	struct ata_port_info pi = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	};
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	struct ahci_host_priv *hpriv;
+	struct ata_host *host;
+	struct resource *mem;
+	int irq;
+	int n_ports;
+	int i;
+	int rc;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(dev, "no mmio space\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(dev, "no irq\n");
+		return -EINVAL;
+	}
+
+	if (pdata && pdata->init) {
+		rc = pdata->init(dev);
+		if (rc)
+			return rc;
+	}
+
+	if (pdata && pdata->ata_port_info)
+		pi = *pdata->ata_port_info;
+
+	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!hpriv) {
+		rc = -ENOMEM;
+		goto err0;
+	}
+
+	hpriv->flags |= (unsigned long)pi.private_data;
+
+	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+	if (!hpriv->mmio) {
+		dev_err(dev, "can't map %pR\n", mem);
+		rc = -ENOMEM;
+		goto err0;
+	}
+
+	ahci_save_initial_config(dev, hpriv,
+		pdata ? pdata->force_port_map : 0,
+		pdata ? pdata->mask_port_map  : 0);
+
+	/* prepare host */
+	if (hpriv->cap & HOST_CAP_NCQ)
+		pi.flags |= ATA_FLAG_NCQ;
+
+	if (hpriv->cap & HOST_CAP_PMP)
+		pi.flags |= ATA_FLAG_PMP;
+
+	ahci_set_em_messages(hpriv, &pi);
+
+	/* CAP.NP sometimes indicate the index of the last enabled
+	 * port, at other times, that of the last possible port, so
+	 * determining the maximum port number requires looking at
+	 * both CAP.NP and port_map.
+	 */
+	n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+
+	host = ata_host_alloc_pinfo(dev, ppi, n_ports);
+	if (!host) {
+		rc = -ENOMEM;
+		goto err0;
+	}
+
+	host->private_data = hpriv;
+
+	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
+		host->flags |= ATA_HOST_PARALLEL_SCAN;
+	else
+		printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+
+	if (pi.flags & ATA_FLAG_EM)
+		ahci_reset_em(host);
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		ata_port_desc(ap, "mmio %pR", mem);
+		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
+
+		/* set initial link pm policy */
+		ap->pm_policy = NOT_AVAILABLE;
+
+		/* set enclosure management message type */
+		if (ap->flags & ATA_FLAG_EM)
+			ap->em_message_type = ahci_em_messages;
+
+		/* disabled/not-implemented port */
+		if (!(hpriv->port_map & (1 << i)))
+			ap->ops = &ata_dummy_port_ops;
+	}
+
+	rc = ahci_reset_controller(host);
+	if (rc)
+		goto err0;
+
+	ahci_init_controller(host);
+	ahci_print_info(host, "platform");
+
+	rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
+			       &ahci_sht);
+	if (rc)
+		goto err0;
+
+	return 0;
+err0:
+	if (pdata && pdata->exit)
+		pdata->exit(dev);
+	return rc;
+}
+
+static int __devexit ahci_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct ahci_platform_data *pdata = pdev->dev.platform_data;
+
+	ata_host_detach(host);
+
+	if (pdata && pdata->exit)
+		pdata->exit(dev);
+
+	return 0;
+}
+
+static struct platform_driver ahci_driver = {
+	.probe = ahci_probe,
+	.remove = __devexit_p(ahci_remove),
+	.driver = {
+		.name = "ahci",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init ahci_init(void)
+{
+	return platform_driver_probe(&ahci_driver, ahci_probe);
+}
+module_init(ahci_init);
+
+static void __exit ahci_exit(void)
+{
+	platform_driver_unregister(&ahci_driver);
+}
+module_exit(ahci_exit);
+
+MODULE_DESCRIPTION("AHCI SATA platform driver");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ahci");
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
new file mode 100644
index 0000000..f7dd576
--- /dev/null
+++ b/include/linux/ahci_platform.h
@@ -0,0 +1,29 @@
+/*
+ * AHCI SATA platform driver
+ *
+ * Copyright 2004-2005  Red Hat, Inc.
+ *   Jeff Garzik <jgarzik@pobox.com>
+ * Copyright 2010  MontaVista Software, LLC.
+ *   Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ */
+
+#ifndef _AHCI_PLATFORM_H
+#define _AHCI_PLATFORM_H
+
+struct device;
+struct ata_port_info;
+
+struct ahci_platform_data {
+	int (*init)(struct device *dev);
+	void (*exit)(struct device *dev);
+	const struct ata_port_info *ata_port_info;
+	unsigned int force_port_map;
+	unsigned int mask_port_map;
+};
+
+#endif /* _AHCI_PLATFORM_H */
-- 
1.7.0

Re: [PATCH 09/11] ahci: Move generic code into libahci

[Sergei Shtylyov]

Hello.

Anton Vorontsov wrote:

> This patch should contain no functional changes, just moves code
> around.
>
> Currently libahci.c and ahci.c are built into a single module,
> so there is no need for EXPORT_SYMBOL_GPL()s, yet. Exports will be
> added in a subsequent patch.
>   

   This is not true anymore, so the exports are probably needed.

> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
>  drivers/ata/Makefile  |    2 +-
>  drivers/ata/ahci.c    | 2271 +------------------------------------------------
>  drivers/ata/libahci.c | 2059 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/ata/libahci.h |  330 +++++++
>  4 files changed, 2391 insertions(+), 2271 deletions(-)
>  create mode 100644 drivers/ata/libahci.c
>  create mode 100644 drivers/ata/libahci.h
>
> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> index b7d4923..75e3abd 100644
> --- a/drivers/ata/Makefile
> +++ b/drivers/ata/Makefile
> @@ -1,7 +1,7 @@
>  
>  obj-$(CONFIG_ATA)		+= libata.o
>  
> -obj-$(CONFIG_SATA_AHCI)		+= ahci.o
> +obj-$(CONFIG_SATA_AHCI)		+= libahci.o ahci.o
>   

   This means 2 different modules: libahci.ko and ahci.ko.

MBR, Sergei

Re: [PATCH 09/11] ahci: Move generic code into libahci

[Anton Vorontsov]

On Wed, Mar 03, 2010 at 08:33:47PM +0300, Sergei Shtylyov wrote:
[...]
> >diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> >index b7d4923..75e3abd 100644
> >--- a/drivers/ata/Makefile
> >+++ b/drivers/ata/Makefile
> >@@ -1,7 +1,7 @@
> > obj-$(CONFIG_ATA)		+= libata.o
> >-obj-$(CONFIG_SATA_AHCI)		+= ahci.o
> >+obj-$(CONFIG_SATA_AHCI)		+= libahci.o ahci.o
> 
>   This means 2 different modules: libahci.ko and ahci.ko.

Right you are. And we can't do ahci-objs += libahci.o ahci.o,
since that would be a circular dependency. Oh well, I'll merge
09 and 10 patches.

Thanks!

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2

Re: [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module

[Sergei Shtylyov]

Hello.

Anton Vorontsov wrote:

> This is needed for non-PCI drivers that will be added soon.
>
> Since the symbols are exported now, libahci and ahci can be built as
> a separate modules.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
>  drivers/ata/Kconfig   |    8 +++++++-
>  drivers/ata/Makefile  |    3 ++-
>  drivers/ata/libahci.c |   20 ++++++++++++++++++++
>  3 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 01c52c4..365a9da 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -59,12 +59,18 @@ config SATA_PMP
>  
>  config SATA_AHCI
>  	tristate "AHCI SATA support"
> -	depends on PCI
>  	help
>  	  This option enables support for AHCI Serial ATA.
>  
>  	  If unsure, say N.
>  
> +config SATA_AHCI_PCI
> +	tristate "PCI AHCI SATA support"
> +	depends on SATA_AHCI && PCI
>   

   Perhaps it's worth to turn that into select SATA_AHCI and make 
SATA_AHCI invisible to users instead, so that each particular AHCI 
implementation could select it.

> +	default y
>   

   Why force the default "y" if the predecessor option SATA_AHCI didn't 
do it?

MBR, Sergei

Re: [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module

[Anton Vorontsov]

On Wed, Mar 03, 2010 at 08:53:30PM +0300, Sergei Shtylyov wrote:
[...]
> >diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> >index 01c52c4..365a9da 100644
> >--- a/drivers/ata/Kconfig
> >+++ b/drivers/ata/Kconfig
> >@@ -59,12 +59,18 @@ config SATA_PMP
> > config SATA_AHCI
> > 	tristate "AHCI SATA support"
> >-	depends on PCI
> > 	help
> > 	  This option enables support for AHCI Serial ATA.
> > 	  If unsure, say N.
> >+config SATA_AHCI_PCI
> >+	tristate "PCI AHCI SATA support"
> >+	depends on SATA_AHCI && PCI
> 
>   Perhaps it's worth to turn that into select SATA_AHCI and make
> SATA_AHCI invisible to users instead, so that each particular AHCI
> implementation could select it.

No, we must maintain old .config's semantics. SATA_AHCI is already
visible to the users, and if we remove it, we'll break
'make oldconfig'.

> >+	default y
> 
>   Why force the default "y" if the predecessor option SATA_AHCI
> didn't do it?

For the same reason, to keep old .configs working.

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2

Re: [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module

[Anton Vorontsov]

On Wed, Mar 03, 2010 at 09:08:34PM +0300, Anton Vorontsov wrote:
> On Wed, Mar 03, 2010 at 08:53:30PM +0300, Sergei Shtylyov wrote:
> [...]
> > >diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> > >index 01c52c4..365a9da 100644
> > >--- a/drivers/ata/Kconfig
> > >+++ b/drivers/ata/Kconfig
> > >@@ -59,12 +59,18 @@ config SATA_PMP
> > > config SATA_AHCI
> > > 	tristate "AHCI SATA support"
> > >-	depends on PCI
> > > 	help
> > > 	  This option enables support for AHCI Serial ATA.
> > > 	  If unsure, say N.
> > >+config SATA_AHCI_PCI
> > >+	tristate "PCI AHCI SATA support"
> > >+	depends on SATA_AHCI && PCI
> > 
> >   Perhaps it's worth to turn that into select SATA_AHCI and make
> > SATA_AHCI invisible to users instead, so that each particular AHCI
> > implementation could select it.
> 
> No, we must maintain old .config's semantics. SATA_AHCI is already
> visible to the users, and if we remove it, we'll break
> 'make oldconfig'.
> 
> > >+	default y
> > 
> >   Why force the default "y" if the predecessor option SATA_AHCI
> > didn't do it?
> 
> For the same reason, to keep old .configs working.

OTOH, we can introduce invisible SATA_LIBAHCI, which is better,
I think.

Re: [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module

[Jeff Garzik]

On 03/03/2010 01:14 PM, Anton Vorontsov wrote:
> On Wed, Mar 03, 2010 at 09:08:34PM +0300, Anton Vorontsov wrote:
>> On Wed, Mar 03, 2010 at 08:53:30PM +0300, Sergei Shtylyov wrote:
>> [...]
>>>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>>>> index 01c52c4..365a9da 100644
>>>> --- a/drivers/ata/Kconfig
>>>> +++ b/drivers/ata/Kconfig
>>>> @@ -59,12 +59,18 @@ config SATA_PMP
>>>> config SATA_AHCI
>>>> 	tristate "AHCI SATA support"
>>>> -	depends on PCI
>>>> 	help
>>>> 	  This option enables support for AHCI Serial ATA.
>>>> 	  If unsure, say N.
>>>> +config SATA_AHCI_PCI
>>>> +	tristate "PCI AHCI SATA support"
>>>> +	depends on SATA_AHCI&&  PCI
>>>
>>>    Perhaps it's worth to turn that into select SATA_AHCI and make
>>> SATA_AHCI invisible to users instead, so that each particular AHCI
>>> implementation could select it.
>>
>> No, we must maintain old .config's semantics. SATA_AHCI is already
>> visible to the users, and if we remove it, we'll break
>> 'make oldconfig'.
>>
>>>> +	default y
>>>
>>>    Why force the default "y" if the predecessor option SATA_AHCI
>>> didn't do it?
>>
>> For the same reason, to keep old .configs working.
>
> OTOH, we can introduce invisible SATA_LIBAHCI, which is better,
> I think.

There is no need for any Kconfig wrangling.  Just do it in the Makefile:

obj-$(SATA_AHCI_EXAMPLE1) += sata_example1.o libahci.o
obj-$(SATA_AHCI_EXAMPLE2) += sata_example2.o libahci.o

Thus,

1) update PCI ahci's Makefile entry
2) add Kconfig and Makefile entry for platform_ahci

No need to touch PCI AHCI's Kconfig bits at all.

Regards,

	Jeff

Re: [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module

[Anton Vorontsov]

On Wed, Mar 03, 2010 at 01:34:01PM -0500, Jeff Garzik wrote:
[...]
> >OTOH, we can introduce invisible SATA_LIBAHCI, which is better,
> >I think.
> 
> There is no need for any Kconfig wrangling.  Just do it in the Makefile:
> 
> obj-$(SATA_AHCI_EXAMPLE1) += sata_example1.o libahci.o
> obj-$(SATA_AHCI_EXAMPLE2) += sata_example2.o libahci.o
> 
> Thus,
> 
> 1) update PCI ahci's Makefile entry
> 2) add Kconfig and Makefile entry for platform_ahci
> 
> No need to touch PCI AHCI's Kconfig bits at all.

Ah, I see. Will do.

Thanks!

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2

Re: [PATCH 09/11] ahci: Move generic code into libahci

[Jeff Garzik]

On 03/03/2010 12:17 PM, Anton Vorontsov wrote:
> This patch should contain no functional changes, just moves code
> around.

Excellent!  I like how this patch series is split up.  You've precisely 
what you needed to do here -- major code movement should avoid any 
changes outside the minimum required to build this patch.

Others should follow your example :)


> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> new file mode 100644
> index 0000000..3ec32ee
> --- /dev/null
> +++ b/drivers/ata/libahci.c
> @@ -0,0 +1,2059 @@
> +/*
> + *  ahci.c - AHCI SATA low-level routines

this should reflect new filename



> diff --git a/drivers/ata/libahci.h b/drivers/ata/libahci.h
> new file mode 100644
> index 0000000..60bce4e
> --- /dev/null
> +++ b/drivers/ata/libahci.h
> @@ -0,0 +1,330 @@
> +/*
> + *  ahci.c - AHCI SATA low-level routines

Ditto.

Note that my preference for header file name would be ahci.h rather than 
libahci.h, to reflect that it includes generic AHCI hardware definitions 
as well as libahci structures and function prototypes.

Re: [PATCH 01/11] ahci: Get rid of host->iomap usage

[Jeff Garzik]

On 03/03/2010 12:17 PM, Anton Vorontsov wrote:
> Currently the driver uses host->iomap to store all the iomapped BARs
> of a PCI device (while AHCI devices actually use just a single memory
> window).
>
> We're going to teach AHCI to work with non-PCI buses, so there are two
> options to make this work:
>
> 1. "fake" host->iomap array for non-PCI devices, and place the needed
>     address at iomap[AHCI_PCI_BAR];
> 2. Get rid of host->iomap usage, instead introduce a private mmio
>     field.
>
> This patch implements the second option.
>
> Signed-off-by: Anton Vorontsov<avorontsov@ru.mvista.com>
> ---
>   drivers/ata/ahci.c |   34 ++++++++++++++++++++--------------
>   1 files changed, 20 insertions(+), 14 deletions(-)

Does platform code not contain any devres support?

At a minimum, you should be using devm_ioremap(), yes?

	Jeff

Re: [PATCH 01/11] ahci: Get rid of host->iomap usage

[Jeff Garzik]

On 03/03/2010 01:45 PM, Jeff Garzik wrote:
> On 03/03/2010 12:17 PM, Anton Vorontsov wrote:
>> Currently the driver uses host->iomap to store all the iomapped BARs
>> of a PCI device (while AHCI devices actually use just a single memory
>> window).
>>
>> We're going to teach AHCI to work with non-PCI buses, so there are two
>> options to make this work:
>>
>> 1. "fake" host->iomap array for non-PCI devices, and place the needed
>> address at iomap[AHCI_PCI_BAR];
>> 2. Get rid of host->iomap usage, instead introduce a private mmio
>> field.
>>
>> This patch implements the second option.
>>
>> Signed-off-by: Anton Vorontsov<avorontsov@ru.mvista.com>
>> ---
>> drivers/ata/ahci.c | 34 ++++++++++++++++++++--------------
>> 1 files changed, 20 insertions(+), 14 deletions(-)
>
> Does platform code not contain any devres support?
>
> At a minimum, you should be using devm_ioremap(), yes?

Nevermind, I see this now in the platform driver.

Re: [PATCH 08/11] ahci: Introduce ahci_set_em_messages()

[Jeff Garzik]

On 03/03/2010 12:17 PM, Anton Vorontsov wrote:
> Factor out some ahci_em_messages handling code from ahci_init_one().
> We would like to reuse it for non-PCI devices.
>
> Signed-off-by: Anton Vorontsov<avorontsov@ru.mvista.com>
> ---
>   drivers/ata/ahci.c |   41 ++++++++++++++++++++++++-----------------
>   1 files changed, 24 insertions(+), 17 deletions(-)

applied patches 1-8 (ie. up to and including this patch) to 
libata-dev.git#upstream.  Will drop all other patches, awaiting revision 
and resend.

Re: [PATCH 09/11] ahci: Move generic code into libahci

[Mark Lord]

On 03/03/10 13:43, Jeff Garzik wrote:
> On 03/03/2010 12:17 PM, Anton Vorontsov wrote:
>> This patch should contain no functional changes, just moves code
>> around.
>
> Excellent! I like how this patch series is split up.
..

Yes.  Excellent work!