[GIT PATCH] TTY fixes for 2.6.34-git

[GIT PATCH] TTY fixes for 2.6.34-git

[Greg KH]

Here are some tty bugfixes for your 2.6.34-git tree.

The biggest here is a revert of a patch that went into 2.6.34-rc1 that
shouldn't have gone in (no proper testing and no userspace need just
yet.)  Other than that, just a number of bugfixes.

Please pull from:
	master.kernel.org:/pub/scm/linux/kernel/git/gregkh/tty-2.6.git/

These patches have been in the linux-next tree for a while now.

Patches will be sent to the linux-kernel mailing list, if anyone wants
to see them.

thanks,

greg k-h

------------

 drivers/char/hvc_console.c              |   31 ++++++++++++++++--------
 drivers/char/tty_buffer.c               |    4 +-
 drivers/char/tty_port.c                 |    2 +-
 drivers/char/vt_ioctl.c                 |   39 +++++++++++++++----------------
 drivers/serial/cpm_uart/cpm_uart_cpm2.c |    4 +-
 drivers/serial/uartlite.c               |   10 ++++----
 drivers/usb/serial/console.c            |    1 +
 include/linux/tty.h                     |   10 ++++---
 include/linux/vt.h                      |    3 +-
 9 files changed, 58 insertions(+), 46 deletions(-)

---------------

Amit Shah (1):
      hvc_console: Fix race between hvc_close and hvc_remove

David Miller (1):
      uartlite: Fix build on sparc.

Fang Wenqi (1):
      tty_buffer: Fix distinct type warning

Greg Kroah-Hartman (1):
      Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"

Jason Wessel (1):
      tty_port,usb-console: Fix usb serial console open/close regression

Mel Gorman (1):
      tty: Take a 256 byte padding into account when buffering below sub-page units

Tobias Klauser (1):
      tty: cpm_uart: use resource_size()

[PATCH 1/7] Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"

[Greg Kroah-Hartman]

This reverts commit eec9fe7d1ab4a0dfac4cb43047a7657fffd0002f.

Ari writes as the reason this should be reverted:
	The problems with this patch include:
	1. There's at least one subtlety I overlooked - switching
	between X servers (i.e. from one X VT to another) still requires
	the cooperation of both X servers. I was assuming that KMS
	eliminated this.
	2. It hasn't been tested at all (no X server patch exists which
	uses the new mode).

As he was the original author of the patch, I'll revert it.

Cc: Ari Entlich <atrigent@ccs.neu.edu>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/vt_ioctl.c |   39 +++++++++++++++++++--------------------
 include/linux/vt.h      |    3 +--
 2 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 87778dc..6aa1028 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -888,7 +888,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 			ret = -EFAULT;
 			goto out;
 		}
-		if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS && tmp.mode != VT_PROCESS_AUTO) {
+		if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS) {
 			ret = -EINVAL;
 			goto out;
 		}
@@ -1622,7 +1622,7 @@ static void complete_change_console(struct vc_data *vc)
 	 * telling it that it has acquired. Also check if it has died and
 	 * clean up (similar to logic employed in change_console())
 	 */
-	if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
+	if (vc->vt_mode.mode == VT_PROCESS) {
 		/*
 		 * Send the signal as privileged - kill_pid() will
 		 * tell us if the process has gone or something else
@@ -1682,7 +1682,7 @@ void change_console(struct vc_data *new_vc)
 	 * vt to auto control.
 	 */
 	vc = vc_cons[fg_console].d;
-	if (vc->vt_mode.mode == VT_PROCESS || vc->vt_mode.mode == VT_PROCESS_AUTO) {
+	if (vc->vt_mode.mode == VT_PROCESS) {
 		/*
 		 * Send the signal as privileged - kill_pid() will
 		 * tell us if the process has gone or something else
@@ -1693,28 +1693,27 @@ void change_console(struct vc_data *new_vc)
 		 */
 		vc->vt_newvt = new_vc->vc_num;
 		if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
-			if(vc->vt_mode.mode == VT_PROCESS)
-				/*
-				 * It worked. Mark the vt to switch to and
-				 * return. The process needs to send us a
-				 * VT_RELDISP ioctl to complete the switch.
-				 */
-				return;
-		} else {
 			/*
-			 * The controlling process has died, so we revert back to
-			 * normal operation. In this case, we'll also change back
-			 * to KD_TEXT mode. I'm not sure if this is strictly correct
-			 * but it saves the agony when the X server dies and the screen
-			 * remains blanked due to KD_GRAPHICS! It would be nice to do
-			 * this outside of VT_PROCESS but there is no single process
-			 * to account for and tracking tty count may be undesirable.
+			 * It worked. Mark the vt to switch to and
+			 * return. The process needs to send us a
+			 * VT_RELDISP ioctl to complete the switch.
 			 */
-			reset_vc(vc);
+			return;
 		}
 
 		/*
-		 * Fall through to normal (VT_AUTO and VT_PROCESS_AUTO) handling of the switch...
+		 * The controlling process has died, so we revert back to
+		 * normal operation. In this case, we'll also change back
+		 * to KD_TEXT mode. I'm not sure if this is strictly correct
+		 * but it saves the agony when the X server dies and the screen
+		 * remains blanked due to KD_GRAPHICS! It would be nice to do
+		 * this outside of VT_PROCESS but there is no single process
+		 * to account for and tracking tty count may be undesirable.
+		 */
+		reset_vc(vc);
+
+		/*
+		 * Fall through to normal (VT_AUTO) handling of the switch...
 		 */
 	}
 
diff --git a/include/linux/vt.h b/include/linux/vt.h
index 778b7b2..d5dd0bc 100644
--- a/include/linux/vt.h
+++ b/include/linux/vt.h
@@ -27,7 +27,7 @@ struct vt_mode {
 #define VT_SETMODE	0x5602	/* set mode of active vt */
 #define		VT_AUTO		0x00	/* auto vt switching */
 #define		VT_PROCESS	0x01	/* process controls switching */
-#define		VT_PROCESS_AUTO 0x02	/* process is notified of switching */
+#define		VT_ACKACQ	0x02	/* acknowledge switch */
 
 struct vt_stat {
 	unsigned short v_active;	/* active vt */
@@ -38,7 +38,6 @@ struct vt_stat {
 #define VT_SENDSIG	0x5604	/* signal to send to bitmask of vts */
 
 #define VT_RELDISP	0x5605	/* release display */
-#define		VT_ACKACQ	0x02	/* acknowledge switch */
 
 #define VT_ACTIVATE	0x5606	/* make vt active */
 #define VT_WAITACTIVE	0x5607	/* wait for vt active */
-- 
1.7.0.2

[PATCH 2/7] tty: Take a 256 byte padding into account when buffering below sub-page units

[Greg Kroah-Hartman]

From: Mel Gorman <mel@csn.ul.ie>

The TTY layer takes some care to ensure that only sub-page allocations
are made with interrupts disabled. It does this by setting a goal of
"TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the
size of tty_buffer into account, it fails to account that tty_buffer_find()
rounds the buffer size out to the next 256 byte boundary before adding on
the size of the tty_buffer.

This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the
size of the tty_buffer and the padding. Once applied, tty_buffer_alloc()
should not require high-order allocations.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 include/linux/tty.h |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/include/linux/tty.h b/include/linux/tty.h
index 568369a..593228a 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -70,12 +70,13 @@ struct tty_buffer {
 
 /*
  * We default to dicing tty buffer allocations to this many characters
- * in order to avoid multiple page allocations. We assume tty_buffer itself
- * is under 256 bytes. See tty_buffer_find for the allocation logic this
- * must match
+ * in order to avoid multiple page allocations. We know the size of
+ * tty_buffer itself but it must also be taken into account that the
+ * the buffer is 256 byte aligned. See tty_buffer_find for the allocation
+ * logic this must match
  */
 
-#define TTY_BUFFER_PAGE		((PAGE_SIZE  - 256) / 2)
+#define TTY_BUFFER_PAGE	(((PAGE_SIZE - sizeof(struct tty_buffer)) / 2) & ~0xFF)
 
 
 struct tty_bufhead {
-- 
1.7.0.2

[PATCH 3/7] uartlite: Fix build on sparc.

[Greg Kroah-Hartman]

From: David Miller <davem@davemloft.net>

We can get this driver enabled via MFD_TIMBERDALE which only
requires GPIO to be on.

But the of_address_to_resource() function is only present on
powerpc and microblaze, so we have to conditionalize the
CONFIG_OF probing bits on that.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/uartlite.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index ab2ab3c..f0a6c61 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <asm/io.h>
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
@@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = {
 /* ---------------------------------------------------------------------
  * OF bus bindings
  */
-#if defined(CONFIG_OF)
+#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
 static int __devinit
 ulite_of_probe(struct of_device *op, const struct of_device_id *match)
 {
@@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void)
 {
 	of_unregister_platform_driver(&ulite_of_driver);
 }
-#else /* CONFIG_OF */
-/* CONFIG_OF not enabled; do nothing helpers */
+#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
+/* Appropriate config not enabled; do nothing helpers */
 static inline int __init ulite_of_register(void) { return 0; }
 static inline void __exit ulite_of_unregister(void) { }
-#endif /* CONFIG_OF */
+#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
 
 /* ---------------------------------------------------------------------
  * Module setup/teardown
-- 
1.7.0.2

Re: [PATCH 3/7] uartlite: Fix build on sparc.

[Grant Likely]

On Fri, Mar 19, 2010 at 9:18 AM, Greg Kroah-Hartman <gregkh@suse.de> wrote:
> From: David Miller <davem@davemloft.net>
>
> We can get this driver enabled via MFD_TIMBERDALE which only
> requires GPIO to be on.
>
> But the of_address_to_resource() function is only present on
> powerpc and microblaze, so we have to conditionalize the
> CONFIG_OF probing bits on that.
>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Hi Greg,

In the end I ended up merging this one through my tree.  I picked it
up when I needed it for my own testing and so it was in my last merge
request for Linus.

g.

Re: [PATCH 3/7] uartlite: Fix build on sparc.

[Grant Likely]

On Fri, Mar 19, 2010 at 10:15 AM, Grant Likely
<grant.likely@secretlab.ca> wrote:
> On Fri, Mar 19, 2010 at 9:18 AM, Greg Kroah-Hartman <gregkh@suse.de> wrote:
>> From: David Miller <davem@davemloft.net>
>>
>> We can get this driver enabled via MFD_TIMBERDALE which only
>> requires GPIO to be on.
>>
>> But the of_address_to_resource() function is only present on
>> powerpc and microblaze, so we have to conditionalize the
>> CONFIG_OF probing bits on that.
>>
>> Signed-off-by: David S. Miller <davem@davemloft.net>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
>
> Hi Greg,
>
> In the end I ended up merging this one through my tree.  I picked it
> up when I needed it for my own testing and so it was in my last merge
> request for Linus.

nm.  I see your merge req, and there are no merge issues.  Sorry for the noise.

g.

Re: [PATCH 3/7] uartlite: Fix build on sparc.

[Michal Simek]

Greg Kroah-Hartman wrote:
> From: David Miller <davem@davemloft.net>
> 
> We can get this driver enabled via MFD_TIMBERDALE which only
> requires GPIO to be on.
> 
> But the of_address_to_resource() function is only present on
> powerpc and microblaze, so we have to conditionalize the
> CONFIG_OF probing bits on that.
> 
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Acked-by: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> ---
>  drivers/serial/uartlite.c |   10 +++++-----
>  1 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
> index ab2ab3c..f0a6c61 100644
> --- a/drivers/serial/uartlite.c
> +++ b/drivers/serial/uartlite.c
> @@ -19,7 +19,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/init.h>
>  #include <asm/io.h>
> -#if defined(CONFIG_OF)
> +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))

What about do this in Kconfig?

Michal

>  #include <linux/of.h>
>  #include <linux/of_device.h>
>  #include <linux/of_platform.h>
> @@ -581,7 +581,7 @@ static struct platform_driver ulite_platform_driver = {
>  /* ---------------------------------------------------------------------
>   * OF bus bindings
>   */
> -#if defined(CONFIG_OF)
> +#if defined(CONFIG_OF) && (defined(CONFIG_PPC32) || defined(CONFIG_MICROBLAZE))
>  static int __devinit
>  ulite_of_probe(struct of_device *op, const struct of_device_id *match)
>  {
> @@ -631,11 +631,11 @@ static inline void __exit ulite_of_unregister(void)
>  {
>  	of_unregister_platform_driver(&ulite_of_driver);
>  }
> -#else /* CONFIG_OF */
> -/* CONFIG_OF not enabled; do nothing helpers */
> +#else /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
> +/* Appropriate config not enabled; do nothing helpers */
>  static inline int __init ulite_of_register(void) { return 0; }
>  static inline void __exit ulite_of_unregister(void) { }
> -#endif /* CONFIG_OF */
> +#endif /* CONFIG_OF && (CONFIG_PPC32 || CONFIG_MICROBLAZE) */
>  
>  /* ---------------------------------------------------------------------
>   * Module setup/teardown


-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian

[PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Greg Kroah-Hartman]

From: Amit Shah <amit.shah@redhat.com>

Alan pointed out a race in the code where hvc_remove is invoked. The
recent virtio_console work is the first user of hvc_remove().

Alan describes it thus:

The hvc_console assumes that a close and remove call can't occur at the
same time.

In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
itself....

So this can happen

        hvc_close                               hvc_remove
        hung up ? - no
                                                lock
                                                tty = hp->tty
                                                unlock
        lock
        hp->tty = NULL
        unlock
        notify del
        kref_put the hvc struct
        close completes
        tty is destroyed
                                                tty_hangup dead tty
                                                tty->ops will be NULL
                                                NULL->...

This patch adds some tty krefs and also converts to using tty_vhangup().

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linuxppc-dev@ozlabs.org
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/hvc_console.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 465185f..ba55bba 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	spin_lock_irqsave(&hp->lock, flags);
 	/* Check and then increment for fast path open. */
 	if (hp->count++ > 0) {
+		tty_kref_get(tty);
 		spin_unlock_irqrestore(&hp->lock, flags);
 		hvc_kick();
 		return 0;
@@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 
 	tty->driver_data = hp;
 
-	hp->tty = tty;
+	hp->tty = tty_kref_get(tty);
 
 	spin_unlock_irqrestore(&hp->lock, flags);
 
@@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 		spin_lock_irqsave(&hp->lock, flags);
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
+		tty_kref_put(tty);
 		tty->driver_data = NULL;
 		kref_put(&hp->kref, destroy_hvc_struct);
 		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
@@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		return;
 
 	hp = tty->driver_data;
+
 	spin_lock_irqsave(&hp->lock, flags);
+	tty_kref_get(tty);
 
 	if (--hp->count == 0) {
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
 
+		/* Put the ref obtained in hvc_open() */
+		tty_kref_put(tty);
+
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
 
@@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		spin_unlock_irqrestore(&hp->lock, flags);
 	}
 
+	tty_kref_put(tty);
 	kref_put(&hp->kref, destroy_hvc_struct);
 }
 
@@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
 	spin_unlock_irqrestore(&hp->lock, flags);
 
 	if (hp->ops->notifier_hangup)
-			hp->ops->notifier_hangup(hp, hp->data);
+		hp->ops->notifier_hangup(hp, hp->data);
 
 	while(temp_open_count) {
 		--temp_open_count;
+		tty_kref_put(tty);
 		kref_put(&hp->kref, destroy_hvc_struct);
 	}
 }
@@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
 	}
 
 	/* No tty attached, just skip */
-	tty = hp->tty;
+	tty = tty_kref_get(hp->tty);
 	if (tty == NULL)
 		goto bail;
 
@@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
 
 		tty_flip_buffer_push(tty);
 	}
+	if (tty)
+		tty_kref_put(tty);
 
 	return poll_mask;
 }
@@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
 	struct tty_struct *tty;
 
 	spin_lock_irqsave(&hp->lock, flags);
-	tty = hp->tty;
+	tty = tty_kref_get(hp->tty);
 
 	if (hp->index < MAX_NR_HVC_CONSOLES)
 		vtermnos[hp->index] = -1;
@@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
 	/*
 	 * We 'put' the instance that was grabbed when the kref instance
 	 * was initialized using kref_init().  Let the last holder of this
-	 * kref cause it to be removed, which will probably be the tty_hangup
+	 * kref cause it to be removed, which will probably be the tty_vhangup
 	 * below.
 	 */
 	kref_put(&hp->kref, destroy_hvc_struct);
 
 	/*
-	 * This function call will auto chain call hvc_hangup.  The tty should
-	 * always be valid at this time unless a simultaneous tty close already
-	 * cleaned up the hvc_struct.
+	 * This function call will auto chain call hvc_hangup.
 	 */
-	if (tty)
-		tty_hangup(tty);
+	if (tty) {
+		tty_vhangup(tty);
+		tty_kref_put(tty);
+	}
 	return 0;
 }
 EXPORT_SYMBOL_GPL(hvc_remove);
-- 
1.7.0.2

[PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Greg Kroah-Hartman]

From: Amit Shah <amit.shah@redhat.com>

Alan pointed out a race in the code where hvc_remove is invoked. The
recent virtio_console work is the first user of hvc_remove().

Alan describes it thus:

The hvc_console assumes that a close and remove call can't occur at the
same time.

In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
itself....

So this can happen

        hvc_close                               hvc_remove
        hung up ? - no
                                                lock
                                                tty = hp->tty
                                                unlock
        lock
        hp->tty = NULL
        unlock
        notify del
        kref_put the hvc struct
        close completes
        tty is destroyed
                                                tty_hangup dead tty
                                                tty->ops will be NULL
                                                NULL->...

This patch adds some tty krefs and also converts to using tty_vhangup().

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linuxppc-dev@ozlabs.org
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/hvc_console.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 465185f..ba55bba 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	spin_lock_irqsave(&hp->lock, flags);
 	/* Check and then increment for fast path open. */
 	if (hp->count++ > 0) {
+		tty_kref_get(tty);
 		spin_unlock_irqrestore(&hp->lock, flags);
 		hvc_kick();
 		return 0;
@@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 
 	tty->driver_data = hp;
 
-	hp->tty = tty;
+	hp->tty = tty_kref_get(tty);
 
 	spin_unlock_irqrestore(&hp->lock, flags);
 
@@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 		spin_lock_irqsave(&hp->lock, flags);
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
+		tty_kref_put(tty);
 		tty->driver_data = NULL;
 		kref_put(&hp->kref, destroy_hvc_struct);
 		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
@@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		return;
 
 	hp = tty->driver_data;
+
 	spin_lock_irqsave(&hp->lock, flags);
+	tty_kref_get(tty);
 
 	if (--hp->count == 0) {
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
 
+		/* Put the ref obtained in hvc_open() */
+		tty_kref_put(tty);
+
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
 
@@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 		spin_unlock_irqrestore(&hp->lock, flags);
 	}
 
+	tty_kref_put(tty);
 	kref_put(&hp->kref, destroy_hvc_struct);
 }
 
@@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
 	spin_unlock_irqrestore(&hp->lock, flags);
 
 	if (hp->ops->notifier_hangup)
-			hp->ops->notifier_hangup(hp, hp->data);
+		hp->ops->notifier_hangup(hp, hp->data);
 
 	while(temp_open_count) {
 		--temp_open_count;
+		tty_kref_put(tty);
 		kref_put(&hp->kref, destroy_hvc_struct);
 	}
 }
@@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
 	}
 
 	/* No tty attached, just skip */
-	tty = hp->tty;
+	tty = tty_kref_get(hp->tty);
 	if (tty == NULL)
 		goto bail;
 
@@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
 
 		tty_flip_buffer_push(tty);
 	}
+	if (tty)
+		tty_kref_put(tty);
 
 	return poll_mask;
 }
@@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
 	struct tty_struct *tty;
 
 	spin_lock_irqsave(&hp->lock, flags);
-	tty = hp->tty;
+	tty = tty_kref_get(hp->tty);
 
 	if (hp->index < MAX_NR_HVC_CONSOLES)
 		vtermnos[hp->index] = -1;
@@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
 	/*
 	 * We 'put' the instance that was grabbed when the kref instance
 	 * was initialized using kref_init().  Let the last holder of this
-	 * kref cause it to be removed, which will probably be the tty_hangup
+	 * kref cause it to be removed, which will probably be the tty_vhangup
 	 * below.
 	 */
 	kref_put(&hp->kref, destroy_hvc_struct);
 
 	/*
-	 * This function call will auto chain call hvc_hangup.  The tty should
-	 * always be valid at this time unless a simultaneous tty close already
-	 * cleaned up the hvc_struct.
+	 * This function call will auto chain call hvc_hangup.
 	 */
-	if (tty)
-		tty_hangup(tty);
+	if (tty) {
+		tty_vhangup(tty);
+		tty_kref_put(tty);
+	}
 	return 0;
 }
 EXPORT_SYMBOL_GPL(hvc_remove);
-- 
1.7.0.2

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Benjamin Herrenschmidt]

On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> From: Amit Shah <amit.shah@redhat.com>
> 
> Alan pointed out a race in the code where hvc_remove is invoked. The
> recent virtio_console work is the first user of hvc_remove().

This causes hangs during boot on pseries machines. Haven't had a chance
to track that down yet, but please revert
e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

Cheers,
Ben.


> Alan describes it thus:
> 
> The hvc_console assumes that a close and remove call can't occur at the
> same time.
> 
> In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
> itself....
> 
> So this can happen
> 
>         hvc_close                               hvc_remove
>         hung up ? - no
>                                                 lock
>                                                 tty = hp->tty
>                                                 unlock
>         lock
>         hp->tty = NULL
>         unlock
>         notify del
>         kref_put the hvc struct
>         close completes
>         tty is destroyed
>                                                 tty_hangup dead tty
>                                                 tty->ops will be NULL
>                                                 NULL->...
> 
> This patch adds some tty krefs and also converts to using tty_vhangup().
> 
> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
> Signed-off-by: Amit Shah <amit.shah@redhat.com>
> CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
> CC: linuxppc-dev@ozlabs.org
> CC: Rusty Russell <rusty@rustcorp.com.au>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> ---
>  drivers/char/hvc_console.c |   31 +++++++++++++++++++++----------
>  1 files changed, 21 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index 465185f..ba55bba 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
>  	spin_lock_irqsave(&hp->lock, flags);
>  	/* Check and then increment for fast path open. */
>  	if (hp->count++ > 0) {
> +		tty_kref_get(tty);
>  		spin_unlock_irqrestore(&hp->lock, flags);
>  		hvc_kick();
>  		return 0;
> @@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
>  
>  	tty->driver_data = hp;
>  
> -	hp->tty = tty;
> +	hp->tty = tty_kref_get(tty);
>  
>  	spin_unlock_irqrestore(&hp->lock, flags);
>  
> @@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
>  		spin_lock_irqsave(&hp->lock, flags);
>  		hp->tty = NULL;
>  		spin_unlock_irqrestore(&hp->lock, flags);
> +		tty_kref_put(tty);
>  		tty->driver_data = NULL;
>  		kref_put(&hp->kref, destroy_hvc_struct);
>  		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
> @@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
>  		return;
>  
>  	hp = tty->driver_data;
> +
>  	spin_lock_irqsave(&hp->lock, flags);
> +	tty_kref_get(tty);
>  
>  	if (--hp->count == 0) {
>  		/* We are done with the tty pointer now. */
>  		hp->tty = NULL;
>  		spin_unlock_irqrestore(&hp->lock, flags);
>  
> +		/* Put the ref obtained in hvc_open() */
> +		tty_kref_put(tty);
> +
>  		if (hp->ops->notifier_del)
>  			hp->ops->notifier_del(hp, hp->data);
>  
> @@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
>  		spin_unlock_irqrestore(&hp->lock, flags);
>  	}
>  
> +	tty_kref_put(tty);
>  	kref_put(&hp->kref, destroy_hvc_struct);
>  }
>  
> @@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
>  	spin_unlock_irqrestore(&hp->lock, flags);
>  
>  	if (hp->ops->notifier_hangup)
> -			hp->ops->notifier_hangup(hp, hp->data);
> +		hp->ops->notifier_hangup(hp, hp->data);
>  
>  	while(temp_open_count) {
>  		--temp_open_count;
> +		tty_kref_put(tty);
>  		kref_put(&hp->kref, destroy_hvc_struct);
>  	}
>  }
> @@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
>  	}
>  
>  	/* No tty attached, just skip */
> -	tty = hp->tty;
> +	tty = tty_kref_get(hp->tty);
>  	if (tty == NULL)
>  		goto bail;
>  
> @@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
>  
>  		tty_flip_buffer_push(tty);
>  	}
> +	if (tty)
> +		tty_kref_put(tty);
>  
>  	return poll_mask;
>  }
> @@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
>  	struct tty_struct *tty;
>  
>  	spin_lock_irqsave(&hp->lock, flags);
> -	tty = hp->tty;
> +	tty = tty_kref_get(hp->tty);
>  
>  	if (hp->index < MAX_NR_HVC_CONSOLES)
>  		vtermnos[hp->index] = -1;
> @@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
>  	/*
>  	 * We 'put' the instance that was grabbed when the kref instance
>  	 * was initialized using kref_init().  Let the last holder of this
> -	 * kref cause it to be removed, which will probably be the tty_hangup
> +	 * kref cause it to be removed, which will probably be the tty_vhangup
>  	 * below.
>  	 */
>  	kref_put(&hp->kref, destroy_hvc_struct);
>  
>  	/*
> -	 * This function call will auto chain call hvc_hangup.  The tty should
> -	 * always be valid at this time unless a simultaneous tty close already
> -	 * cleaned up the hvc_struct.
> +	 * This function call will auto chain call hvc_hangup.
>  	 */
> -	if (tty)
> -		tty_hangup(tty);
> +	if (tty) {
> +		tty_vhangup(tty);
> +		tty_kref_put(tty);
> +	}
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(hvc_remove);

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Benjamin Herrenschmidt]

On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> From: Amit Shah <amit.shah@redhat.com>
> 
> Alan pointed out a race in the code where hvc_remove is invoked. The
> recent virtio_console work is the first user of hvc_remove().

This causes hangs during boot on pseries machines. Haven't had a chance
to track that down yet, but please revert
e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

Cheers,
Ben.


> Alan describes it thus:
> 
> The hvc_console assumes that a close and remove call can't occur at the
> same time.
> 
> In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
> itself....
> 
> So this can happen
> 
>         hvc_close                               hvc_remove
>         hung up ? - no
>                                                 lock
>                                                 tty = hp->tty
>                                                 unlock
>         lock
>         hp->tty = NULL
>         unlock
>         notify del
>         kref_put the hvc struct
>         close completes
>         tty is destroyed
>                                                 tty_hangup dead tty
>                                                 tty->ops will be NULL
>                                                 NULL->...
> 
> This patch adds some tty krefs and also converts to using tty_vhangup().
> 
> Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
> Signed-off-by: Amit Shah <amit.shah@redhat.com>
> CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
> CC: linuxppc-dev@ozlabs.org
> CC: Rusty Russell <rusty@rustcorp.com.au>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> ---
>  drivers/char/hvc_console.c |   31 +++++++++++++++++++++----------
>  1 files changed, 21 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index 465185f..ba55bba 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
>  	spin_lock_irqsave(&hp->lock, flags);
>  	/* Check and then increment for fast path open. */
>  	if (hp->count++ > 0) {
> +		tty_kref_get(tty);
>  		spin_unlock_irqrestore(&hp->lock, flags);
>  		hvc_kick();
>  		return 0;
> @@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
>  
>  	tty->driver_data = hp;
>  
> -	hp->tty = tty;
> +	hp->tty = tty_kref_get(tty);
>  
>  	spin_unlock_irqrestore(&hp->lock, flags);
>  
> @@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
>  		spin_lock_irqsave(&hp->lock, flags);
>  		hp->tty = NULL;
>  		spin_unlock_irqrestore(&hp->lock, flags);
> +		tty_kref_put(tty);
>  		tty->driver_data = NULL;
>  		kref_put(&hp->kref, destroy_hvc_struct);
>  		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
> @@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
>  		return;
>  
>  	hp = tty->driver_data;
> +
>  	spin_lock_irqsave(&hp->lock, flags);
> +	tty_kref_get(tty);
>  
>  	if (--hp->count == 0) {
>  		/* We are done with the tty pointer now. */
>  		hp->tty = NULL;
>  		spin_unlock_irqrestore(&hp->lock, flags);
>  
> +		/* Put the ref obtained in hvc_open() */
> +		tty_kref_put(tty);
> +
>  		if (hp->ops->notifier_del)
>  			hp->ops->notifier_del(hp, hp->data);
>  
> @@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
>  		spin_unlock_irqrestore(&hp->lock, flags);
>  	}
>  
> +	tty_kref_put(tty);
>  	kref_put(&hp->kref, destroy_hvc_struct);
>  }
>  
> @@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
>  	spin_unlock_irqrestore(&hp->lock, flags);
>  
>  	if (hp->ops->notifier_hangup)
> -			hp->ops->notifier_hangup(hp, hp->data);
> +		hp->ops->notifier_hangup(hp, hp->data);
>  
>  	while(temp_open_count) {
>  		--temp_open_count;
> +		tty_kref_put(tty);
>  		kref_put(&hp->kref, destroy_hvc_struct);
>  	}
>  }
> @@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
>  	}
>  
>  	/* No tty attached, just skip */
> -	tty = hp->tty;
> +	tty = tty_kref_get(hp->tty);
>  	if (tty == NULL)
>  		goto bail;
>  
> @@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
>  
>  		tty_flip_buffer_push(tty);
>  	}
> +	if (tty)
> +		tty_kref_put(tty);
>  
>  	return poll_mask;
>  }
> @@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
>  	struct tty_struct *tty;
>  
>  	spin_lock_irqsave(&hp->lock, flags);
> -	tty = hp->tty;
> +	tty = tty_kref_get(hp->tty);
>  
>  	if (hp->index < MAX_NR_HVC_CONSOLES)
>  		vtermnos[hp->index] = -1;
> @@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
>  	/*
>  	 * We 'put' the instance that was grabbed when the kref instance
>  	 * was initialized using kref_init().  Let the last holder of this
> -	 * kref cause it to be removed, which will probably be the tty_hangup
> +	 * kref cause it to be removed, which will probably be the tty_vhangup
>  	 * below.
>  	 */
>  	kref_put(&hp->kref, destroy_hvc_struct);
>  
>  	/*
> -	 * This function call will auto chain call hvc_hangup.  The tty should
> -	 * always be valid at this time unless a simultaneous tty close already
> -	 * cleaned up the hvc_struct.
> +	 * This function call will auto chain call hvc_hangup.
>  	 */
> -	if (tty)
> -		tty_hangup(tty);
> +	if (tty) {
> +		tty_vhangup(tty);
> +		tty_kref_put(tty);
> +	}
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(hvc_remove);

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Sun) Mar 21 2010 [08:04:39], Benjamin Herrenschmidt wrote:
> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > From: Amit Shah <amit.shah@redhat.com>
> > 
> > Alan pointed out a race in the code where hvc_remove is invoked. The
> > recent virtio_console work is the first user of hvc_remove().
> 
> This causes hangs during boot on pseries machines. Haven't had a chance
> to track that down yet, but please revert
> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

I tested this with the virtio-console driver with multiple consoles on
Linux-2.6.34-rc2 inside a KVM VM. I didn't face any lockups / badness,
but the following popped up once on -smp 4.

Could this be the same bug that's causing a lockup for you?

Since the virtio-console isn't the primary console on my VM, I didn't
see a lockup but maybe powerpc uses this as the primary console and the
lockup is a result of this?

I've not investigated this; I might get around to it next week, but
CC'ing the sched people on this one.

(My .config is after the oops.)

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
PGD 3d261067 PUD 3d013067 PMD 0 
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/virtual/block/ram13/removable
CPU 0 
Modules linked in:

Pid: 573, comm: console_check Not tainted 2.6.34-rc2 #102 /Bochs
RIP: 0010:[<ffffffff8101f4dc>]  [<ffffffff8101f4dc>]
task_is_waking+0x1/0x1f
RSP: 0018:ffff88003bdf5b48  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff81646e30
RDX: ffff88003bdf5b78 RSI: ffff88003bdf5ba0 RDI: 0000000000000000
RBP: ffff88003bdf5b78 R08: 0000000000000000 R09: ffffffff81646e08
R10: 0000000000000046 R11: 0000000000001130 R12: 00000000001d1d00
R13: 0000000000000000 R14: ffff88003bdf5ba0 R15: 000000000000000f
FS:  00007f330731b6f0(0000) GS:ffff880003800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000003be78000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process console_check (pid: 573, threadinfo ffff88003bdf4000, task
ffff88003bc3a2d0)
Stack:
 ffff88003bdf5b78 ffffffff8102058e 0000000000000000 0000000000000000
<0> 0000000000000000 0000000000000000 ffff88003bdf5bd8 ffffffff81026f03
<0> ffff88003ead8cd8 ffff88003eb10490 ffff88003bdf5bd8 ffffffff8118cea9
Call Trace:
 [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
 [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
 [<ffffffff8118cea9>] ? resize_console+0x25/0x95
 [<ffffffff8102721f>] wake_up_process+0x10/0x12
 [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
 [<ffffffff8118cbb4>] hvc_open+0xf6/0x102
 [<ffffffff81179f7d>] tty_open+0x369/0x4f0
 [<ffffffff810a47e8>] chrdev_open+0x127/0x148
 [<ffffffff810a46c1>] ? chrdev_open+0x0/0x148
 [<ffffffff810a066b>] __dentry_open+0x154/0x28a
 [<ffffffff810a0866>] nameidata_to_filp+0x3a/0x4b
 [<ffffffff810ab9cb>] do_last+0x473/0x5ba
 [<ffffffff810abd12>] do_filp_open+0x200/0x602
 [<ffffffff8104e43b>] ? get_lock_stats+0x20/0x4c
 [<ffffffff8124fa30>] ? _raw_spin_unlock+0x45/0x52
 [<ffffffff810b4d68>] ? spin_unlock+0x9/0xb
 [<ffffffff810b5455>] ? alloc_fd+0x111/0x123
 [<ffffffff810a045a>] do_sys_open+0x57/0xd7
 [<ffffffff810a0503>] sys_open+0x1b/0x1d
 [<ffffffff81001ec2>] system_call_fastpath+0x16/0x1b
Code: c5 e8 ef 9b 09 00 48 83 c3 08 48 83 3b 00 75 c4 4c 89 e7 48 c7 c6
87 a7 4c 81 e8 69 95 09 00 41 58 31 c0 5b 41 5c 41 5d c9 c3 55 <48> 8b
17 31 c0 48 89 e5 48 81 fa 00 01 00 00 75 0b 8b 47 14 d1 
RIP  [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
 RSP <ffff88003bdf5b48>
CR2: 0000000000000000
---[ end trace a8d89f6ae287538e ]---
note: console_check[573] exited with preempt_count 2
BUG: scheduling while atomic: console_check/573/0x10000002
INFO: lockdep is turned off.
Modules linked in:
Pid: 573, comm: console_check Tainted: G      D    2.6.34-rc2 #102
Call Trace:
 [<ffffffff8104f44e>] ? __debug_show_held_locks+0x1b/0x24
 [<ffffffff81024f1b>] __schedule_bug+0x72/0x77
 [<ffffffff8124d073>] schedule+0xcc/0x69f
 [<ffffffff81027f95>] __cond_resched+0x13/0x1f
 [<ffffffff8124d6e8>] _cond_resched+0x16/0x1d
 [<ffffffff81085874>] unmap_vmas+0x733/0x7b1
 [<ffffffff8108a474>] exit_mmap+0x88/0xdc
 [<ffffffff8102b1ce>] mmput+0x43/0xb4
 [<ffffffff8102ed92>] exit_mm+0x103/0x110
 [<ffffffff8118b138>] ? spin_unlock_irq+0x9/0xb
 [<ffffffff8103067d>] do_exit+0x1e7/0x68c
 [<ffffffff8102d4ca>] ? spin_unlock_irqrestore+0x9/0xb
 [<ffffffff8102e14c>] ? kmsg_dump+0x150/0x16a
 [<ffffffff810059be>] ? oops_end+0x44/0x94
 [<ffffffff81005a09>] oops_end+0x8f/0x94
 [<ffffffff81019f80>] no_context+0x1f7/0x206
 [<ffffffff81017450>] ? kvm_clock_read+0x3e/0x5c
 [<ffffffff8101a11c>] __bad_area_nosemaphore+0x18d/0x1b0
 [<ffffffff8101a31d>] ? do_page_fault+0xaa/0x295
 [<ffffffff8101a14d>] bad_area_nosemaphore+0xe/0x10
 [<ffffffff8101a3bc>] do_page_fault+0x149/0x295
 [<ffffffff81250435>] page_fault+0x25/0x30
 [<ffffffff8101f4dc>] ? task_is_waking+0x1/0x1f
 [<ffffffff8124fa7f>] ? _raw_spin_unlock_irqrestore+0x42/0x79
 [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
 [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
 [<ffffffff8118cea9>] ? resize_console+0x25/0x95
 [<ffffffff8102721f>] wake_up_process+0x10/0x12
 [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
 [<ffffffff8118cbb4>] hvc_open+0xf6/0x102
 [<ffffffff81179f7d>] tty_open+0x369/0x4f0
 [<ffffffff810a47e8>] chrdev_open+0x127/0x148
 [<ffffffff810a46c1>] ? chrdev_open+0x0/0x148
 [<ffffffff810a066b>] __dentry_open+0x154/0x28a
 [<ffffffff810a0866>] nameidata_to_filp+0x3a/0x4b
 [<ffffffff810ab9cb>] do_last+0x473/0x5ba
 [<ffffffff810abd12>] do_filp_open+0x200/0x602
 [<ffffffff8104e43b>] ? get_lock_stats+0x20/0x4c
 [<ffffffff8124fa30>] ? _raw_spin_unlock+0x45/0x52
 [<ffffffff810b4d68>] ? spin_unlock+0x9/0xb
 [<ffffffff810b5455>] ? alloc_fd+0x111/0x123
 [<ffffffff810a045a>] do_sys_open+0x57/0xd7
 [<ffffffff810a0503>] sys_open+0x1b/0x1d
 [<ffffffff81001ec2>] system_call_fastpath+0x16/0x1b
EXT4-fs (sda1): mounted filesystem with ordered data mode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
PGD 3e7ab067 PUD 3ce84067 PMD 0 
Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file:
/sys/devices/pci0000:00/0000:00:01.1/host0/target0:0:0/0:0:0:0/block/sda/sda2/dev
CPU 1 
Modules linked in:

Pid: 951, comm: agetty Tainted: G      D    2.6.34-rc2 #102 /Bochs
RIP: 0010:[<ffffffff8101f4dc>]  [<ffffffff8101f4dc>]
task_is_waking+0x1/0x1f
RSP: 0018:ffff88003cdd9b48  EFLAGS: 00010246
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88003cdd9bb8 RSI: ffff88003cdd9ba0 RDI: 0000000000000000
RBP: ffff88003cdd9b78 R08: ffff88003f80d168 R09: ffff88003ef60018
R10: 0000000000000046 R11: 0000000000000292 R12: 00000000001d1d00
R13: 0000000000000000 R14: ffff88003cdd9ba0 R15: 000000000000000f
FS:  00007fd200b486f0(0000) GS:ffff880003a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000003f189000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process agetty (pid: 951, threadinfo ffff88003cdd8000, task
ffff88003d2f8000)
Stack:
 ffff88003cdd9b78 ffffffff8102058e 0000000000000000 0000000000000000
<0> 0000000000000000 0000000000000001 ffff88003cdd9bd8 ffffffff81026f03
<0> 0000000000000000 0000000000000046 ffff88003ef60018 0000000000000046
Call Trace:
 [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
 [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
 [<ffffffff8102721f>] wake_up_process+0x10/0x12
 [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
 [<ffffffff8118cb1b>] hvc_open+0x5d/0x102
 [<ffffffff81179f7d>] tty_open+0x369/0x4f0
 [<ffffffff810a47e8>] chrdev_open+0x127/0x148
 [<ffffffff810a2899>] ? spin_unlock+0x9/0xb
 [<ffffffff810a46c1>] ? chrdev_open+0x0/0x148
 [<ffffffff810a066b>] __dentry_open+0x154/0x28a
 [<ffffffff810a0866>] nameidata_to_filp+0x3a/0x4b
 [<ffffffff810ab9cb>] do_last+0x473/0x5ba
 [<ffffffff810abd12>] do_filp_open+0x200/0x602
 [<ffffffff8124fa30>] ? _raw_spin_unlock+0x45/0x52
 [<ffffffff810b4d68>] ? spin_unlock+0x9/0xb
 [<ffffffff810b5455>] ? alloc_fd+0x111/0x123
 [<ffffffff810a045a>] do_sys_open+0x57/0xd7
 [<ffffffff810a0503>] sys_open+0x1b/0x1d
 [<ffffffff81001ec2>] system_call_fastpath+0x16/0x1b
Code: c5 e8 ef 9b 09 00 48 83 c3 08 48 83 3b 00 75 c4 4c 89 e7 48 c7 c6
87 a7 4c 81 e8 69 95 09 00 41 58 31 c0 5b 41 5c 41 5d c9 c3 55 <48> 8b
17 31 c0 48 89 e5 48 81 fa 00 01 00 00 75 0b 8b 47 14 d1 
RIP  [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
 RSP <ffff88003cdd9b48>
CR2: 0000000000000000
---[ end trace a8d89f6ae287538f ]---
note: agetty[951] exited with preempt_count 2


#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc1
# Fri Mar 19 12:49:57 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_SYSFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Sun) Mar 21 2010 [08:04:39], Benjamin Herrenschmidt wrote:
> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > From: Amit Shah <amit.shah@redhat.com>
> > 
> > Alan pointed out a race in the code where hvc_remove is invoked. The
> > recent virtio_console work is the first user of hvc_remove().
> 
> This causes hangs during boot on pseries machines. Haven't had a chance
> to track that down yet, but please revert
> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

I tested this with the virtio-console driver with multiple consoles on
Linux-2.6.34-rc2 inside a KVM VM. I didn't face any lockups / badness,
but the following popped up once on -smp 4.

Could this be the same bug that's causing a lockup for you?

Since the virtio-console isn't the primary console on my VM, I didn't
see a lockup but maybe powerpc uses this as the primary console and the
lockup is a result of this?

I've not investigated this; I might get around to it next week, but
CC'ing the sched people on this one.

(My .config is after the oops.)

BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
PGD 3d261067 PUD 3d013067 PMD 0 
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/virtual/block/ram13/removable
CPU 0 
Modules linked in:

Pid: 573, comm: console_check Not tainted 2.6.34-rc2 #102 /Bochs
RIP: 0010:[<ffffffff8101f4dc>]  [<ffffffff8101f4dc>]
task_is_waking+0x1/0x1f
RSP: 0018:ffff88003bdf5b48  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff81646e30
RDX: ffff88003bdf5b78 RSI: ffff88003bdf5ba0 RDI: 0000000000000000
RBP: ffff88003bdf5b78 R08: 0000000000000000 R09: ffffffff81646e08
R10: 0000000000000046 R11: 0000000000001130 R12: 00000000001d1d00
R13: 0000000000000000 R14: ffff88003bdf5ba0 R15: 000000000000000f
FS:  00007f330731b6f0(0000) GS:ffff880003800000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000003be78000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process console_check (pid: 573, threadinfo ffff88003bdf4000, task
ffff88003bc3a2d0)
Stack:
 ffff88003bdf5b78 ffffffff8102058e 0000000000000000 0000000000000000
<0> 0000000000000000 0000000000000000 ffff88003bdf5bd8 ffffffff81026f03
<0> ffff88003ead8cd8 ffff88003eb10490 ffff88003bdf5bd8 ffffffff8118cea9
Call Trace:
 [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
 [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
 [<ffffffff8118cea9>] ? resize_console+0x25/0x95
 [<ffffffff8102721f>] wake_up_process+0x10/0x12
 [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
 [<ffffffff8118cbb4>] hvc_open+0xf6/0x102
 [<ffffffff81179f7d>] tty_open+0x369/0x4f0
 [<ffffffff810a47e8>] chrdev_open+0x127/0x148
 [<ffffffff810a46c1>] ? chrdev_open+0x0/0x148
 [<ffffffff810a066b>] __dentry_open+0x154/0x28a
 [<ffffffff810a0866>] nameidata_to_filp+0x3a/0x4b
 [<ffffffff810ab9cb>] do_last+0x473/0x5ba
 [<ffffffff810abd12>] do_filp_open+0x200/0x602
 [<ffffffff8104e43b>] ? get_lock_stats+0x20/0x4c
 [<ffffffff8124fa30>] ? _raw_spin_unlock+0x45/0x52
 [<ffffffff810b4d68>] ? spin_unlock+0x9/0xb
 [<ffffffff810b5455>] ? alloc_fd+0x111/0x123
 [<ffffffff810a045a>] do_sys_open+0x57/0xd7
 [<ffffffff810a0503>] sys_open+0x1b/0x1d
 [<ffffffff81001ec2>] system_call_fastpath+0x16/0x1b
Code: c5 e8 ef 9b 09 00 48 83 c3 08 48 83 3b 00 75 c4 4c 89 e7 48 c7 c6
87 a7 4c 81 e8 69 95 09 00 41 58 31 c0 5b 41 5c 41 5d c9 c3 55 <48> 8b
17 31 c0 48 89 e5 48 81 fa 00 01 00 00 75 0b 8b 47 14 d1 
RIP  [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
 RSP <ffff88003bdf5b48>
CR2: 0000000000000000
---[ end trace a8d89f6ae287538e ]---
note: console_check[573] exited with preempt_count 2
BUG: scheduling while atomic: console_check/573/0x10000002
INFO: lockdep is turned off.
Modules linked in:
Pid: 573, comm: console_check Tainted: G      D    2.6.34-rc2 #102
Call Trace:
 [<ffffffff8104f44e>] ? __debug_show_held_locks+0x1b/0x24
 [<ffffffff81024f1b>] __schedule_bug+0x72/0x77
 [<ffffffff8124d073>] schedule+0xcc/0x69f
 [<ffffffff81027f95>] __cond_resched+0x13/0x1f
 [<ffffffff8124d6e8>] _cond_resched+0x16/0x1d
 [<ffffffff81085874>] unmap_vmas+0x733/0x7b1
 [<ffffffff8108a474>] exit_mmap+0x88/0xdc
 [<ffffffff8102b1ce>] mmput+0x43/0xb4
 [<ffffffff8102ed92>] exit_mm+0x103/0x110
 [<ffffffff8118b138>] ? spin_unlock_irq+0x9/0xb
 [<ffffffff8103067d>] do_exit+0x1e7/0x68c
 [<ffffffff8102d4ca>] ? spin_unlock_irqrestore+0x9/0xb
 [<ffffffff8102e14c>] ? kmsg_dump+0x150/0x16a
 [<ffffffff810059be>] ? oops_end+0x44/0x94
 [<ffffffff81005a09>] oops_end+0x8f/0x94
 [<ffffffff81019f80>] no_context+0x1f7/0x206
 [<ffffffff81017450>] ? kvm_clock_read+0x3e/0x5c
 [<ffffffff8101a11c>] __bad_area_nosemaphore+0x18d/0x1b0
 [<ffffffff8101a31d>] ? do_page_fault+0xaa/0x295
 [<ffffffff8101a14d>] bad_area_nosemaphore+0xe/0x10
 [<ffffffff8101a3bc>] do_page_fault+0x149/0x295
 [<ffffffff81250435>] page_fault+0x25/0x30
 [<ffffffff8101f4dc>] ? task_is_waking+0x1/0x1f
 [<ffffffff8124fa7f>] ? _raw_spin_unlock_irqrestore+0x42/0x79
 [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
 [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
 [<ffffffff8118cea9>] ? resize_console+0x25/0x95
 [<ffffffff8102721f>] wake_up_process+0x10/0x12
 [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
 [<ffffffff8118cbb4>] hvc_open+0xf6/0x102
 [<ffffffff81179f7d>] tty_open+0x369/0x4f0
 [<ffffffff810a47e8>] chrdev_open+0x127/0x148
 [<ffffffff810a46c1>] ? chrdev_open+0x0/0x148
 [<ffffffff810a066b>] __dentry_open+0x154/0x28a
 [<ffffffff810a0866>] nameidata_to_filp+0x3a/0x4b
 [<ffffffff810ab9cb>] do_last+0x473/0x5ba
 [<ffffffff810abd12>] do_filp_open+0x200/0x602
 [<ffffffff8104e43b>] ? get_lock_stats+0x20/0x4c
 [<ffffffff8124fa30>] ? _raw_spin_unlock+0x45/0x52
 [<ffffffff810b4d68>] ? spin_unlock+0x9/0xb
 [<ffffffff810b5455>] ? alloc_fd+0x111/0x123
 [<ffffffff810a045a>] do_sys_open+0x57/0xd7
 [<ffffffff810a0503>] sys_open+0x1b/0x1d
 [<ffffffff81001ec2>] system_call_fastpath+0x16/0x1b
EXT4-fs (sda1): mounted filesystem with ordered data mode
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
PGD 3e7ab067 PUD 3ce84067 PMD 0 
Oops: 0000 [#2] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file:
/sys/devices/pci0000:00/0000:00:01.1/host0/target0:0:0/0:0:0:0/block/sda/sda2/dev
CPU 1 
Modules linked in:

Pid: 951, comm: agetty Tainted: G      D    2.6.34-rc2 #102 /Bochs
RIP: 0010:[<ffffffff8101f4dc>]  [<ffffffff8101f4dc>]
task_is_waking+0x1/0x1f
RSP: 0018:ffff88003cdd9b48  EFLAGS: 00010246
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88003cdd9bb8 RSI: ffff88003cdd9ba0 RDI: 0000000000000000
RBP: ffff88003cdd9b78 R08: ffff88003f80d168 R09: ffff88003ef60018
R10: 0000000000000046 R11: 0000000000000292 R12: 00000000001d1d00
R13: 0000000000000000 R14: ffff88003cdd9ba0 R15: 000000000000000f
FS:  00007fd200b486f0(0000) GS:ffff880003a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000003f189000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process agetty (pid: 951, threadinfo ffff88003cdd8000, task
ffff88003d2f8000)
Stack:
 ffff88003cdd9b78 ffffffff8102058e 0000000000000000 0000000000000000
<0> 0000000000000000 0000000000000001 ffff88003cdd9bd8 ffffffff81026f03
<0> 0000000000000000 0000000000000046 ffff88003ef60018 0000000000000046
Call Trace:
 [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
 [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
 [<ffffffff8102721f>] wake_up_process+0x10/0x12
 [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
 [<ffffffff8118cb1b>] hvc_open+0x5d/0x102
 [<ffffffff81179f7d>] tty_open+0x369/0x4f0
 [<ffffffff810a47e8>] chrdev_open+0x127/0x148
 [<ffffffff810a2899>] ? spin_unlock+0x9/0xb
 [<ffffffff810a46c1>] ? chrdev_open+0x0/0x148
 [<ffffffff810a066b>] __dentry_open+0x154/0x28a
 [<ffffffff810a0866>] nameidata_to_filp+0x3a/0x4b
 [<ffffffff810ab9cb>] do_last+0x473/0x5ba
 [<ffffffff810abd12>] do_filp_open+0x200/0x602
 [<ffffffff8124fa30>] ? _raw_spin_unlock+0x45/0x52
 [<ffffffff810b4d68>] ? spin_unlock+0x9/0xb
 [<ffffffff810b5455>] ? alloc_fd+0x111/0x123
 [<ffffffff810a045a>] do_sys_open+0x57/0xd7
 [<ffffffff810a0503>] sys_open+0x1b/0x1d
 [<ffffffff81001ec2>] system_call_fastpath+0x16/0x1b
Code: c5 e8 ef 9b 09 00 48 83 c3 08 48 83 3b 00 75 c4 4c 89 e7 48 c7 c6
87 a7 4c 81 e8 69 95 09 00 41 58 31 c0 5b 41 5c 41 5d c9 c3 55 <48> 8b
17 31 c0 48 89 e5 48 81 fa 00 01 00 00 75 0b 8b 47 14 d1 
RIP  [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
 RSP <ffff88003cdd9b48>
CR2: 0000000000000000
---[ end trace a8d89f6ae287538f ]---
note: agetty[951] exited with preempt_count 2


#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc1
# Fri Mar 19 12:49:57 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_SYSFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
# CONFIG_ACPI_THERMAL is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IA32_EMULATION is not set
# CONFIG_COMPAT_FOR_U64_ALIGNMENT is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set

#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Sun) Mar 21 2010 [10:07:25], Amit Shah wrote:
> On (Sun) Mar 21 2010 [08:04:39], Benjamin Herrenschmidt wrote:
> > On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > > From: Amit Shah <amit.shah@redhat.com>
> > > 
> > > Alan pointed out a race in the code where hvc_remove is invoked. The
> > > recent virtio_console work is the first user of hvc_remove().
> > 
> > This causes hangs during boot on pseries machines. Haven't had a chance
> > to track that down yet, but please revert
> > e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
> 
> I tested this with the virtio-console driver with multiple consoles on
> Linux-2.6.34-rc2 inside a KVM VM. I didn't face any lockups / badness,
> but the following popped up once on -smp 4.
> 
> Could this be the same bug that's causing a lockup for you?
> 
> Since the virtio-console isn't the primary console on my VM, I didn't
> see a lockup but maybe powerpc uses this as the primary console and the
> lockup is a result of this?
> 
> I've not investigated this; I might get around to it next week, but
> CC'ing the sched people on this one.

I just looked at this:

> (My .config is after the oops.)
> 
> BUG: unable to handle kernel NULL pointer dereference at (null)
> IP: [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
> PGD 3d261067 PUD 3d013067 PMD 0 
> Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
> last sysfs file: /sys/devices/virtual/block/ram13/removable
> CPU 0 
> Modules linked in:
> 
> Pid: 573, comm: console_check Not tainted 2.6.34-rc2 #102 /Bochs
> RIP: 0010:[<ffffffff8101f4dc>]  [<ffffffff8101f4dc>]
> task_is_waking+0x1/0x1f
> RSP: 0018:ffff88003bdf5b48  EFLAGS: 00010246
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff81646e30
> RDX: ffff88003bdf5b78 RSI: ffff88003bdf5ba0 RDI: 0000000000000000
> RBP: ffff88003bdf5b78 R08: 0000000000000000 R09: ffffffff81646e08
> R10: 0000000000000046 R11: 0000000000001130 R12: 00000000001d1d00
> R13: 0000000000000000 R14: ffff88003bdf5ba0 R15: 000000000000000f
> FS:  00007f330731b6f0(0000) GS:ffff880003800000(0000)
> knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 000000003be78000 CR4: 00000000000006b0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process console_check (pid: 573, threadinfo ffff88003bdf4000, task
> ffff88003bc3a2d0)
> Stack:
>  ffff88003bdf5b78 ffffffff8102058e 0000000000000000 0000000000000000
> <0> 0000000000000000 0000000000000000 ffff88003bdf5bd8 ffffffff81026f03
> <0> ffff88003ead8cd8 ffff88003eb10490 ffff88003bdf5bd8 ffffffff8118cea9
> Call Trace:
>  [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
>  [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
>  [<ffffffff8118cea9>] ? resize_console+0x25/0x95
>  [<ffffffff8102721f>] wake_up_process+0x10/0x12
>  [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
>  [<ffffffff8118cbb4>] hvc_open+0xf6/0x102

And this suggests that hvc_kick() is called before hvc_task is
initialised, ie, before hvc_init() is called.

Does this help?

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index ba55bba..50ac983 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
 /* Wake the sleeping khvcd */
 void hvc_kick(void)
 {
+       if (!hvc_task)
+               return;
+
        hvc_kicked = 1;
        wake_up_process(hvc_task);
 }

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Sun) Mar 21 2010 [10:07:25], Amit Shah wrote:
> On (Sun) Mar 21 2010 [08:04:39], Benjamin Herrenschmidt wrote:
> > On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > > From: Amit Shah <amit.shah@redhat.com>
> > > 
> > > Alan pointed out a race in the code where hvc_remove is invoked. The
> > > recent virtio_console work is the first user of hvc_remove().
> > 
> > This causes hangs during boot on pseries machines. Haven't had a chance
> > to track that down yet, but please revert
> > e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
> 
> I tested this with the virtio-console driver with multiple consoles on
> Linux-2.6.34-rc2 inside a KVM VM. I didn't face any lockups / badness,
> but the following popped up once on -smp 4.
> 
> Could this be the same bug that's causing a lockup for you?
> 
> Since the virtio-console isn't the primary console on my VM, I didn't
> see a lockup but maybe powerpc uses this as the primary console and the
> lockup is a result of this?
> 
> I've not investigated this; I might get around to it next week, but
> CC'ing the sched people on this one.

I just looked at this:

> (My .config is after the oops.)
> 
> BUG: unable to handle kernel NULL pointer dereference at (null)
> IP: [<ffffffff8101f4dc>] task_is_waking+0x1/0x1f
> PGD 3d261067 PUD 3d013067 PMD 0 
> Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
> last sysfs file: /sys/devices/virtual/block/ram13/removable
> CPU 0 
> Modules linked in:
> 
> Pid: 573, comm: console_check Not tainted 2.6.34-rc2 #102 /Bochs
> RIP: 0010:[<ffffffff8101f4dc>]  [<ffffffff8101f4dc>]
> task_is_waking+0x1/0x1f
> RSP: 0018:ffff88003bdf5b48  EFLAGS: 00010246
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff81646e30
> RDX: ffff88003bdf5b78 RSI: ffff88003bdf5ba0 RDI: 0000000000000000
> RBP: ffff88003bdf5b78 R08: 0000000000000000 R09: ffffffff81646e08
> R10: 0000000000000046 R11: 0000000000001130 R12: 00000000001d1d00
> R13: 0000000000000000 R14: ffff88003bdf5ba0 R15: 000000000000000f
> FS:  00007f330731b6f0(0000) GS:ffff880003800000(0000)
> knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 000000003be78000 CR4: 00000000000006b0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process console_check (pid: 573, threadinfo ffff88003bdf4000, task
> ffff88003bc3a2d0)
> Stack:
>  ffff88003bdf5b78 ffffffff8102058e 0000000000000000 0000000000000000
> <0> 0000000000000000 0000000000000000 ffff88003bdf5bd8 ffffffff81026f03
> <0> ffff88003ead8cd8 ffff88003eb10490 ffff88003bdf5bd8 ffffffff8118cea9
> Call Trace:
>  [<ffffffff8102058e>] ? task_rq_lock+0x24/0x98
>  [<ffffffff81026f03>] try_to_wake_up+0x4b/0x33b
>  [<ffffffff8118cea9>] ? resize_console+0x25/0x95
>  [<ffffffff8102721f>] wake_up_process+0x10/0x12
>  [<ffffffff8118c18e>] hvc_kick+0x1a/0x1c
>  [<ffffffff8118cbb4>] hvc_open+0xf6/0x102

And this suggests that hvc_kick() is called before hvc_task is
initialised, ie, before hvc_init() is called.

Does this help?

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index ba55bba..50ac983 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
 /* Wake the sleeping khvcd */
 void hvc_kick(void)
 {
+       if (!hvc_task)
+               return;
+
        hvc_kicked = 1;
        wake_up_process(hvc_task);
 }

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Anton Blanchard]

 
Hi,

> And this suggests that hvc_kick() is called before hvc_task is
> initialised, ie, before hvc_init() is called.
>
> Does this help?

Looks good, tests OK on my POWER5 box. Thanks!

Tested-by: Anton Blanchard <anton@samba.org>

> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index ba55bba..50ac983 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
>  /* Wake the sleeping khvcd */
>  void hvc_kick(void)
>  {
> +       if (!hvc_task)
> +               return;
> +
>         hvc_kicked = 1;
>         wake_up_process(hvc_task);
>  }
> 
> 		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Anton Blanchard]

 
Hi,

> And this suggests that hvc_kick() is called before hvc_task is
> initialised, ie, before hvc_init() is called.
>
> Does this help?

Looks good, tests OK on my POWER5 box. Thanks!

Tested-by: Anton Blanchard <anton@samba.org>

> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index ba55bba..50ac983 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
>  /* Wake the sleeping khvcd */
>  void hvc_kick(void)
>  {
> +       if (!hvc_task)
> +               return;
> +
>         hvc_kicked = 1;
>         wake_up_process(hvc_task);
>  }
> 
> 		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [10:30:31], Anton Blanchard wrote:
>  
> Hi,
> 
> > And this suggests that hvc_kick() is called before hvc_task is
> > initialised, ie, before hvc_init() is called.
> >
> > Does this help?
> 
> Looks good, tests OK on my POWER5 box. Thanks!
> 
> Tested-by: Anton Blanchard <anton@samba.org>

Thanks. Before I submit this patch, though, I'd like to see why
hvc_kick() gets called before hvc_init. If I can get to it real quick,
I'll do it, else I'll just queue this one up.

> > diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> > index ba55bba..50ac983 100644
> > --- a/drivers/char/hvc_console.c
> > +++ b/drivers/char/hvc_console.c
> > @@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
> >  /* Wake the sleeping khvcd */
> >  void hvc_kick(void)
> >  {
> > +       if (!hvc_task)
> > +               return;
> > +
> >         hvc_kicked = 1;
> >         wake_up_process(hvc_task);
> >  }

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [10:30:31], Anton Blanchard wrote:
>  
> Hi,
> 
> > And this suggests that hvc_kick() is called before hvc_task is
> > initialised, ie, before hvc_init() is called.
> >
> > Does this help?
> 
> Looks good, tests OK on my POWER5 box. Thanks!
> 
> Tested-by: Anton Blanchard <anton@samba.org>

Thanks. Before I submit this patch, though, I'd like to see why
hvc_kick() gets called before hvc_init. If I can get to it real quick,
I'll do it, else I'll just queue this one up.

> > diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> > index ba55bba..50ac983 100644
> > --- a/drivers/char/hvc_console.c
> > +++ b/drivers/char/hvc_console.c
> > @@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
> >  /* Wake the sleeping khvcd */
> >  void hvc_kick(void)
> >  {
> > +       if (!hvc_task)
> > +               return;
> > +
> >         hvc_kicked = 1;
> >         wake_up_process(hvc_task);
> >  }

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Sachin Sant]

Amit Shah wrote:
> On (Sun) Mar 21 2010 [10:07:25], Amit Shah wrote:
>   
>> On (Sun) Mar 21 2010 [08:04:39], Benjamin Herrenschmidt wrote:
>>     
>>> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
>>>       
>>>> From: Amit Shah <amit.shah@redhat.com>
>>>>
>>>> Alan pointed out a race in the code where hvc_remove is invoked. The
>>>> recent virtio_console work is the first user of hvc_remove().
>>>>         
>>> This causes hangs during boot on pseries machines. Haven't had a chance
>>> to track that down yet, but please revert
>>> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
>>>       
<SNIP>

>
>
> And this suggests that hvc_kick() is called before hvc_task is
> initialised, ie, before hvc_init() is called.
>
> Does this help?
>   
Hi Amit,

I too ran into this issue as reported by Anton. Unfortunately in my
case the following suggested patch does not help boot the powerpc
box successfully. The boot still hangs with following messages

/dev/sda5: clean, 229739/2097152 files, 2485598/8377888 blocks (check in 4 mounts)
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda5
mount -o rw,acl,user_xattr -t ext3 /dev/sda5 /root
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): mounted filesystem with writeback data mode
mount: can't find /root/proc in /etc/fstab or /etc/mtab
/sbin/smart_agetty: can not determine 'console' speed


Just to confirm i too am facing same issue as reported by Anton,
reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
by box to boot successfully.

Thanks
-Sachin

> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index ba55bba..50ac983 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
>  /* Wake the sleeping khvcd */
>  void hvc_kick(void)
>  {
> +       if (!hvc_task)
> +               return;
> +
>         hvc_kicked = 1;
>         wake_up_process(hvc_task);
>  }
>
> 		Amit
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>   


-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Sachin Sant]

Amit Shah wrote:
> On (Sun) Mar 21 2010 [10:07:25], Amit Shah wrote:
>   
>> On (Sun) Mar 21 2010 [08:04:39], Benjamin Herrenschmidt wrote:
>>     
>>> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
>>>       
>>>> From: Amit Shah <amit.shah@redhat.com>
>>>>
>>>> Alan pointed out a race in the code where hvc_remove is invoked. The
>>>> recent virtio_console work is the first user of hvc_remove().
>>>>         
>>> This causes hangs during boot on pseries machines. Haven't had a chance
>>> to track that down yet, but please revert
>>> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
>>>       
<SNIP>

>
>
> And this suggests that hvc_kick() is called before hvc_task is
> initialised, ie, before hvc_init() is called.
>
> Does this help?
>   
Hi Amit,

I too ran into this issue as reported by Anton. Unfortunately in my
case the following suggested patch does not help boot the powerpc
box successfully. The boot still hangs with following messages

/dev/sda5: clean, 229739/2097152 files, 2485598/8377888 blocks (check in 4 mounts)
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda5
mount -o rw,acl,user_xattr -t ext3 /dev/sda5 /root
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda5): using internal journal
EXT3-fs (sda5): mounted filesystem with writeback data mode
mount: can't find /root/proc in /etc/fstab or /etc/mtab
/sbin/smart_agetty: can not determine 'console' speed


Just to confirm i too am facing same issue as reported by Anton,
reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
by box to boot successfully.

Thanks
-Sachin

> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index ba55bba..50ac983 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -285,6 +285,9 @@ EXPORT_SYMBOL_GPL(hvc_instantiate);
>  /* Wake the sleeping khvcd */
>  void hvc_kick(void)
>  {
> +       if (!hvc_task)
> +               return;
> +
>         hvc_kicked = 1;
>         wake_up_process(hvc_task);
>  }
>
> 		Amit
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
>
>   


-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
>> And this suggests that hvc_kick() is called before hvc_task is
>> initialised, ie, before hvc_init() is called.
>>
>> Does this help?
>>   
> Hi Amit,
>
> I too ran into this issue as reported by Anton. Unfortunately in my
> case the following suggested patch does not help boot the powerpc
> box successfully. The boot still hangs with following messages

Was the hang you saw before applying this patch at the same place / for
the same reason?

> /dev/sda5: clean, 229739/2097152 files, 2485598/8377888 blocks (check in 4 mounts)
> fsck succeeded. Mounting root device read-write.
> Mounting root /dev/sda5
> mount -o rw,acl,user_xattr -t ext3 /dev/sda5 /root
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (sda5): using internal journal
> EXT3-fs (sda5): mounted filesystem with writeback data mode
> mount: can't find /root/proc in /etc/fstab or /etc/mtab
> /sbin/smart_agetty: can not determine 'console' speed

OK, this gets even murkier. I don't know why taking a few krefs modifies
hvc_console behaviour to such an extent.

> Just to confirm i too am facing same issue as reported by Anton,
> reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
> by box to boot successfully.

Which module uses hvc_console in your case?

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
>> And this suggests that hvc_kick() is called before hvc_task is
>> initialised, ie, before hvc_init() is called.
>>
>> Does this help?
>>   
> Hi Amit,
>
> I too ran into this issue as reported by Anton. Unfortunately in my
> case the following suggested patch does not help boot the powerpc
> box successfully. The boot still hangs with following messages

Was the hang you saw before applying this patch at the same place / for
the same reason?

> /dev/sda5: clean, 229739/2097152 files, 2485598/8377888 blocks (check in 4 mounts)
> fsck succeeded. Mounting root device read-write.
> Mounting root /dev/sda5
> mount -o rw,acl,user_xattr -t ext3 /dev/sda5 /root
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs (sda5): using internal journal
> EXT3-fs (sda5): mounted filesystem with writeback data mode
> mount: can't find /root/proc in /etc/fstab or /etc/mtab
> /sbin/smart_agetty: can not determine 'console' speed

OK, this gets even murkier. I don't know why taking a few krefs modifies
hvc_console behaviour to such an extent.

> Just to confirm i too am facing same issue as reported by Anton,
> reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
> by box to boot successfully.

Which module uses hvc_console in your case?

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]

Hi Amit,

On Fri, 26 Mar 2010 15:28:21 +0530 Amit Shah <amit.shah@redhat.com> wrote:
>
> On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
> >
> > I too ran into this issue as reported by Anton. Unfortunately in my
> > case the following suggested patch does not help boot the powerpc
> > box successfully. The boot still hangs with following messages

I have been getting this on my linux-next boot tests for a while as well.

> Was the hang you saw before applying this patch at the same place / for
> the same reason?

I get the same hangs with and without the patch.  Paulus bisected it
(again) to the commit below and reverting that commit fixes the problem.

> OK, this gets even murkier. I don't know why taking a few krefs modifies
> hvc_console behaviour to such an extent.
> 
> > Just to confirm i too am facing same issue as reported by Anton,
> > reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
> > by box to boot successfully.
> 
> Which module uses hvc_console in your case?

I assume hcv_vio.

I also tested using "init=/bin/bash" as a kernel command line option and
the console worked while I was running bash, but everything was very
sluggish.  Then when I did "exec /sbin/init" the console hung completely
- sysrq (^O) didn't even work any more (it did while I was running bash).

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1468 bytes --]

Hi Amit,

On Fri, 26 Mar 2010 15:28:21 +0530 Amit Shah <amit.shah@redhat.com> wrote:
>
> On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
> >
> > I too ran into this issue as reported by Anton. Unfortunately in my
> > case the following suggested patch does not help boot the powerpc
> > box successfully. The boot still hangs with following messages

I have been getting this on my linux-next boot tests for a while as well.

> Was the hang you saw before applying this patch at the same place / for
> the same reason?

I get the same hangs with and without the patch.  Paulus bisected it
(again) to the commit below and reverting that commit fixes the problem.

> OK, this gets even murkier. I don't know why taking a few krefs modifies
> hvc_console behaviour to such an extent.
> 
> > Just to confirm i too am facing same issue as reported by Anton,
> > reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
> > by box to boot successfully.
> 
> Which module uses hvc_console in your case?

I assume hcv_vio.

I also tested using "init=/bin/bash" as a kernel command line option and
the console worked while I was running bash, but everything was very
sluggish.  Then when I did "exec /sbin/init" the console hung completely
- sysrq (^O) didn't even work any more (it did while I was running bash).

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Sachin Sant]

Amit Shah wrote:
> On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
>   
>>> And this suggests that hvc_kick() is called before hvc_task is
>>> initialised, ie, before hvc_init() is called.
>>>
>>> Does this help?
>>>   
>>>       
>> Hi Amit,
>>
>> I too ran into this issue as reported by Anton. Unfortunately in my
>> case the following suggested patch does not help boot the powerpc
>> box successfully. The boot still hangs with following messages
>>     
>
> Was the hang you saw before applying this patch at the same place / for
> the same reason?
>   
Yes the machine hangs at the same place with or without the patch.

>> mount: can't find /root/proc in /etc/fstab or /etc/mtab
>> /sbin/smart_agetty: can not determine 'console' speed
>>     
>
> OK, this gets even murkier. I don't know why taking a few krefs modifies
> hvc_console behaviour to such an extent.
>   
Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
i see that for every tty_kref_get() there is a corresponding
tty_kref_put() except maybe for the one in the following patch snippet

        spin_lock_irqsave(&hp->lock, flags);
        /* Check and then increment for fast path open. */
        if (hp->count++ > 0) {
+               tty_kref_get(tty);
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;

I don't know this code very well but we might be missing a
corresponding tty_kref_put() some place ?

If i comment out the above tty_kref_get() call, the machine
boots fine with or without the suggested patch.

Thanks
-Sachin


>   
>> Just to confirm i too am facing same issue as reported by Anton,
>> reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
>> by box to boot successfully.
>>     
>
> Which module uses hvc_console in your case?
>
> 		Amit
>
>   


-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Sachin Sant]

Amit Shah wrote:
> On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
>   
>>> And this suggests that hvc_kick() is called before hvc_task is
>>> initialised, ie, before hvc_init() is called.
>>>
>>> Does this help?
>>>   
>>>       
>> Hi Amit,
>>
>> I too ran into this issue as reported by Anton. Unfortunately in my
>> case the following suggested patch does not help boot the powerpc
>> box successfully. The boot still hangs with following messages
>>     
>
> Was the hang you saw before applying this patch at the same place / for
> the same reason?
>   
Yes the machine hangs at the same place with or without the patch.

>> mount: can't find /root/proc in /etc/fstab or /etc/mtab
>> /sbin/smart_agetty: can not determine 'console' speed
>>     
>
> OK, this gets even murkier. I don't know why taking a few krefs modifies
> hvc_console behaviour to such an extent.
>   
Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
i see that for every tty_kref_get() there is a corresponding
tty_kref_put() except maybe for the one in the following patch snippet

        spin_lock_irqsave(&hp->lock, flags);
        /* Check and then increment for fast path open. */
        if (hp->count++ > 0) {
+               tty_kref_get(tty);
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;

I don't know this code very well but we might be missing a
corresponding tty_kref_put() some place ?

If i comment out the above tty_kref_get() call, the machine
boots fine with or without the suggested patch.

Thanks
-Sachin


>   
>> Just to confirm i too am facing same issue as reported by Anton,
>> reverted commit e74d098c66543d0731de62eb747ccd5b636a6f4c and that allowed
>> by box to boot successfully.
>>     
>
> Which module uses hvc_console in your case?
>
> 		Amit
>
>   


-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Alan Cox]

> >> mount: can't find /root/proc in /etc/fstab or /etc/mtab
> >> /sbin/smart_agetty: can not determine 'console' speed
> >>     
> >
> > OK, this gets even murkier. I don't know why taking a few krefs modifies
> > hvc_console behaviour to such an extent.

Can you see if the agetty is getting a hangup or open failing. I wonder
if its just a timing change ?

Alan

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Alan Cox]

> >> mount: can't find /root/proc in /etc/fstab or /etc/mtab
> >> /sbin/smart_agetty: can not determine 'console' speed
> >>     
> >
> > OK, this gets even murkier. I don't know why taking a few krefs modifies
> > hvc_console behaviour to such an extent.

Can you see if the agetty is getting a hangup or open failing. I wonder
if its just a timing change ?

Alan

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [11:52:33], Alan Cox wrote:
> > >> mount: can't find /root/proc in /etc/fstab or /etc/mtab
> > >> /sbin/smart_agetty: can not determine 'console' speed
> > >>     
> > >
> > > OK, this gets even murkier. I don't know why taking a few krefs modifies
> > > hvc_console behaviour to such an extent.
> 
> Can you see if the agetty is getting a hangup or open failing. I wonder
> if its just a timing change ?

Can someone please try this? Looks like it only reproduces on ppc, I
can't get it to reproduce in my kvm vm. I'm trying to get hold of a ppc
box, though. (btw ppc, ppc64, both should trigger this, right?)

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [11:52:33], Alan Cox wrote:
> > >> mount: can't find /root/proc in /etc/fstab or /etc/mtab
> > >> /sbin/smart_agetty: can not determine 'console' speed
> > >>     
> > >
> > > OK, this gets even murkier. I don't know why taking a few krefs modifies
> > > hvc_console behaviour to such an extent.
> 
> Can you see if the agetty is getting a hangup or open failing. I wonder
> if its just a timing change ?

Can someone please try this? Looks like it only reproduces on ppc, I
can't get it to reproduce in my kvm vm. I'm trying to get hold of a ppc
box, though. (btw ppc, ppc64, both should trigger this, right?)

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [17:12:22], Sachin Sant wrote:
> Amit Shah wrote:
>> On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
>>   
>>>> And this suggests that hvc_kick() is called before hvc_task is
>>>> initialised, ie, before hvc_init() is called.
>>>>
>>>> Does this help?
>>>>         
>>> Hi Amit,
>>>
>>> I too ran into this issue as reported by Anton. Unfortunately in my
>>> case the following suggested patch does not help boot the powerpc
>>> box successfully. The boot still hangs with following messages
>>>     
>>
>> Was the hang you saw before applying this patch at the same place / for
>> the same reason?
>>   
> Yes the machine hangs at the same place with or without the patch.

OK.

>>> mount: can't find /root/proc in /etc/fstab or /etc/mtab
>>> /sbin/smart_agetty: can not determine 'console' speed
>>>     
>>
>> OK, this gets even murkier. I don't know why taking a few krefs modifies
>> hvc_console behaviour to such an extent.
>>   
> Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
> i see that for every tty_kref_get() there is a corresponding
> tty_kref_put() except maybe for the one in the following patch snippet
>
>        spin_lock_irqsave(&hp->lock, flags);
>        /* Check and then increment for fast path open. */
>        if (hp->count++ > 0) {
> +               tty_kref_get(tty);
>                spin_unlock_irqrestore(&hp->lock, flags);
>                hvc_kick();
>                return 0;
>
> I don't know this code very well but we might be missing a
> corresponding tty_kref_put() some place ?

See hvc_hangup:

	temp_open_count = hp->count;
	...
	while(temp_open_count) {
		--temp_open_count;
		tty_kref_put(tty);
		kref_put(&hp->kref, destroy_hvc_struct);
	}

> If i comment out the above tty_kref_get() call, the machine
> boots fine with or without the suggested patch.

Hm, so as Alan suggests, it could be a timing issue in getting the ref
and returning back from hvc_open(). I don't know how the tty layer
works, but delays in getting the open() succeed results in badness?
Guess we'll have to poke at the other drivers to see how they handle
open() calls.

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Fri) Mar 26 2010 [17:12:22], Sachin Sant wrote:
> Amit Shah wrote:
>> On (Fri) Mar 26 2010 [14:43:56], Sachin Sant wrote:
>>   
>>>> And this suggests that hvc_kick() is called before hvc_task is
>>>> initialised, ie, before hvc_init() is called.
>>>>
>>>> Does this help?
>>>>         
>>> Hi Amit,
>>>
>>> I too ran into this issue as reported by Anton. Unfortunately in my
>>> case the following suggested patch does not help boot the powerpc
>>> box successfully. The boot still hangs with following messages
>>>     
>>
>> Was the hang you saw before applying this patch at the same place / for
>> the same reason?
>>   
> Yes the machine hangs at the same place with or without the patch.

OK.

>>> mount: can't find /root/proc in /etc/fstab or /etc/mtab
>>> /sbin/smart_agetty: can not determine 'console' speed
>>>     
>>
>> OK, this gets even murkier. I don't know why taking a few krefs modifies
>> hvc_console behaviour to such an extent.
>>   
> Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
> i see that for every tty_kref_get() there is a corresponding
> tty_kref_put() except maybe for the one in the following patch snippet
>
>        spin_lock_irqsave(&hp->lock, flags);
>        /* Check and then increment for fast path open. */
>        if (hp->count++ > 0) {
> +               tty_kref_get(tty);
>                spin_unlock_irqrestore(&hp->lock, flags);
>                hvc_kick();
>                return 0;
>
> I don't know this code very well but we might be missing a
> corresponding tty_kref_put() some place ?

See hvc_hangup:

	temp_open_count = hp->count;
	...
	while(temp_open_count) {
		--temp_open_count;
		tty_kref_put(tty);
		kref_put(&hp->kref, destroy_hvc_struct);
	}

> If i comment out the above tty_kref_get() call, the machine
> boots fine with or without the suggested patch.

Hm, so as Alan suggests, it could be a timing issue in getting the ref
and returning back from hvc_open(). I don't know how the tty layer
works, but delays in getting the open() succeed results in badness?
Guess we'll have to poke at the other drivers to see how they handle
open() calls.

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Anton Blanchard]

Hi,

> > Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
> > i see that for every tty_kref_get() there is a corresponding
> > tty_kref_put() except maybe for the one in the following patch snippet
> >
> >        spin_lock_irqsave(&hp->lock, flags);
> >        /* Check and then increment for fast path open. */
> >        if (hp->count++ > 0) {
> > +               tty_kref_get(tty);
> >                spin_unlock_irqrestore(&hp->lock, flags);
> >                hvc_kick();
> >                return 0;
> >
> > I don't know this code very well but we might be missing a
> > corresponding tty_kref_put() some place ?
> 
> See hvc_hangup:
> 
> 	temp_open_count = hp->count;
> 	...
> 	while(temp_open_count) {
> 		--temp_open_count;
> 		tty_kref_put(tty);
> 		kref_put(&hp->kref, destroy_hvc_struct);
> 	}

I don't claim to understand the tty layer, but it seems like hvc_open and
hvc_close should be balanced in their kref reference counting.

Right now we get a kref every call to hvc_open:

        if (hp->count++ > 0) {
                tty_kref_get(tty); <----- here
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;
        } /* else count == 0 */

        tty->driver_data = hp;

        hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0

But hvc_close has:

        tty_kref_get(tty);

        if (--hp->count == 0) {
...
                /* Put the ref obtained in hvc_open() */
                tty_kref_put(tty);
...
        }

        tty_kref_put(tty);

Since the outside kref get/put balance we only do a single kref_put when
count reaches 0.

The patch below changes things to call tty_kref_put once for every
hvc_close call, and with that my machine boots fine.

Signed-off-by: Anton Blanchard <anton@samba.org>
---

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index d3890e8..35cca4c 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -368,16 +368,12 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 	hp = tty->driver_data;
 
 	spin_lock_irqsave(&hp->lock, flags);
-	tty_kref_get(tty);
 
 	if (--hp->count == 0) {
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
 
-		/* Put the ref obtained in hvc_open() */
-		tty_kref_put(tty);
-
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
 

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Anton Blanchard]

Hi,

> > Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
> > i see that for every tty_kref_get() there is a corresponding
> > tty_kref_put() except maybe for the one in the following patch snippet
> >
> >        spin_lock_irqsave(&hp->lock, flags);
> >        /* Check and then increment for fast path open. */
> >        if (hp->count++ > 0) {
> > +               tty_kref_get(tty);
> >                spin_unlock_irqrestore(&hp->lock, flags);
> >                hvc_kick();
> >                return 0;
> >
> > I don't know this code very well but we might be missing a
> > corresponding tty_kref_put() some place ?
> 
> See hvc_hangup:
> 
> 	temp_open_count = hp->count;
> 	...
> 	while(temp_open_count) {
> 		--temp_open_count;
> 		tty_kref_put(tty);
> 		kref_put(&hp->kref, destroy_hvc_struct);
> 	}

I don't claim to understand the tty layer, but it seems like hvc_open and
hvc_close should be balanced in their kref reference counting.

Right now we get a kref every call to hvc_open:

        if (hp->count++ > 0) {
                tty_kref_get(tty); <----- here
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;
        } /* else count == 0 */

        tty->driver_data = hp;

        hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0

But hvc_close has:

        tty_kref_get(tty);

        if (--hp->count == 0) {
...
                /* Put the ref obtained in hvc_open() */
                tty_kref_put(tty);
...
        }

        tty_kref_put(tty);

Since the outside kref get/put balance we only do a single kref_put when
count reaches 0.

The patch below changes things to call tty_kref_put once for every
hvc_close call, and with that my machine boots fine.

Signed-off-by: Anton Blanchard <anton@samba.org>
---

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index d3890e8..35cca4c 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -368,16 +368,12 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
 	hp = tty->driver_data;
 
 	spin_lock_irqsave(&hp->lock, flags);
-	tty_kref_get(tty);
 
 	if (--hp->count == 0) {
 		/* We are done with the tty pointer now. */
 		hp->tty = NULL;
 		spin_unlock_irqrestore(&hp->lock, flags);
 
-		/* Put the ref obtained in hvc_open() */
-		tty_kref_put(tty);
-
 		if (hp->ops->notifier_del)
 			hp->ops->notifier_del(hp, hp->data);
 

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Tue) Apr 06 2010 [21:42:38], Anton Blanchard wrote:
> 
> Hi,
> 
> > > Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
> > > i see that for every tty_kref_get() there is a corresponding
> > > tty_kref_put() except maybe for the one in the following patch snippet
> > >
> > >        spin_lock_irqsave(&hp->lock, flags);
> > >        /* Check and then increment for fast path open. */
> > >        if (hp->count++ > 0) {
> > > +               tty_kref_get(tty);
> > >                spin_unlock_irqrestore(&hp->lock, flags);
> > >                hvc_kick();
> > >                return 0;
> > >
> > > I don't know this code very well but we might be missing a
> > > corresponding tty_kref_put() some place ?
> > 
> > See hvc_hangup:
> > 
> > 	temp_open_count = hp->count;
> > 	...
> > 	while(temp_open_count) {
> > 		--temp_open_count;
> > 		tty_kref_put(tty);
> > 		kref_put(&hp->kref, destroy_hvc_struct);
> > 	}
> 
> I don't claim to understand the tty layer, but it seems like hvc_open and
> hvc_close should be balanced in their kref reference counting.
> 
> Right now we get a kref every call to hvc_open:
> 
>         if (hp->count++ > 0) {
>                 tty_kref_get(tty); <----- here
>                 spin_unlock_irqrestore(&hp->lock, flags);
>                 hvc_kick();
>                 return 0;
>         } /* else count == 0 */
> 
>         tty->driver_data = hp;
> 
>         hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0
> 
> But hvc_close has:
> 
>         tty_kref_get(tty);
> 
>         if (--hp->count == 0) {
> ...
>                 /* Put the ref obtained in hvc_open() */
>                 tty_kref_put(tty);
> ...
>         }
> 
>         tty_kref_put(tty);
> 
> Since the outside kref get/put balance we only do a single kref_put when
> count reaches 0.

OK, makes sense and since it works for you,

Acked-by: Amit Shah <amit.shah@redhat.com>

> The patch below changes things to call tty_kref_put once for every
> hvc_close call, and with that my machine boots fine.
> 
> Signed-off-by: Anton Blanchard <anton@samba.org>

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Tue) Apr 06 2010 [21:42:38], Anton Blanchard wrote:
> 
> Hi,
> 
> > > Looking at the commit e74d098c66543d0731de62eb747ccd5b636a6f4c,
> > > i see that for every tty_kref_get() there is a corresponding
> > > tty_kref_put() except maybe for the one in the following patch snippet
> > >
> > >        spin_lock_irqsave(&hp->lock, flags);
> > >        /* Check and then increment for fast path open. */
> > >        if (hp->count++ > 0) {
> > > +               tty_kref_get(tty);
> > >                spin_unlock_irqrestore(&hp->lock, flags);
> > >                hvc_kick();
> > >                return 0;
> > >
> > > I don't know this code very well but we might be missing a
> > > corresponding tty_kref_put() some place ?
> > 
> > See hvc_hangup:
> > 
> > 	temp_open_count = hp->count;
> > 	...
> > 	while(temp_open_count) {
> > 		--temp_open_count;
> > 		tty_kref_put(tty);
> > 		kref_put(&hp->kref, destroy_hvc_struct);
> > 	}
> 
> I don't claim to understand the tty layer, but it seems like hvc_open and
> hvc_close should be balanced in their kref reference counting.
> 
> Right now we get a kref every call to hvc_open:
> 
>         if (hp->count++ > 0) {
>                 tty_kref_get(tty); <----- here
>                 spin_unlock_irqrestore(&hp->lock, flags);
>                 hvc_kick();
>                 return 0;
>         } /* else count == 0 */
> 
>         tty->driver_data = hp;
> 
>         hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0
> 
> But hvc_close has:
> 
>         tty_kref_get(tty);
> 
>         if (--hp->count == 0) {
> ...
>                 /* Put the ref obtained in hvc_open() */
>                 tty_kref_put(tty);
> ...
>         }
> 
>         tty_kref_put(tty);
> 
> Since the outside kref get/put balance we only do a single kref_put when
> count reaches 0.

OK, makes sense and since it works for you,

Acked-by: Amit Shah <amit.shah@redhat.com>

> The patch below changes things to call tty_kref_put once for every
> hvc_close call, and with that my machine boots fine.
> 
> Signed-off-by: Anton Blanchard <anton@samba.org>

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Sachin Sant]

Anton Blanchard wrote:
> The patch below changes things to call tty_kref_put once for every
> hvc_close call, and with that my machine boots fine.
>
> Signed-off-by: Anton Blanchard <anton@samba.org>
> ---
>   
Works for me. Thanks Anton.

Regards
-Sachin

> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index d3890e8..35cca4c 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -368,16 +368,12 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
>  	hp = tty->driver_data;
>
>  	spin_lock_irqsave(&hp->lock, flags);
> -	tty_kref_get(tty);
>
>  	if (--hp->count == 0) {
>  		/* We are done with the tty pointer now. */
>  		hp->tty = NULL;
>  		spin_unlock_irqrestore(&hp->lock, flags);
>
> -		/* Put the ref obtained in hvc_open() */
> -		tty_kref_put(tty);
> -
>  		if (hp->ops->notifier_del)
>  			hp->ops->notifier_del(hp, hp->data);
>
>
>   


-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Sachin Sant]

Anton Blanchard wrote:
> The patch below changes things to call tty_kref_put once for every
> hvc_close call, and with that my machine boots fine.
>
> Signed-off-by: Anton Blanchard <anton@samba.org>
> ---
>   
Works for me. Thanks Anton.

Regards
-Sachin

> diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> index d3890e8..35cca4c 100644
> --- a/drivers/char/hvc_console.c
> +++ b/drivers/char/hvc_console.c
> @@ -368,16 +368,12 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
>  	hp = tty->driver_data;
>
>  	spin_lock_irqsave(&hp->lock, flags);
> -	tty_kref_get(tty);
>
>  	if (--hp->count == 0) {
>  		/* We are done with the tty pointer now. */
>  		hp->tty = NULL;
>  		spin_unlock_irqrestore(&hp->lock, flags);
>
> -		/* Put the ref obtained in hvc_open() */
> -		tty_kref_put(tty);
> -
>  		if (hp->ops->notifier_del)
>  			hp->ops->notifier_del(hp, hp->data);
>
>
>   


-- 

---------------------------------
Sachin Sant
IBM Linux Technology Center
India Systems and Technology Labs
Bangalore, India
---------------------------------

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Alan Cox]

> I don't claim to understand the tty layer, but it seems like hvc_open and
> hvc_close should be balanced in their kref reference counting.

They should yes.

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Alan Cox]

> I don't claim to understand the tty layer, but it seems like hvc_open and
> hvc_close should be balanced in their kref reference counting.

They should yes.

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Rusty Russell]

On Tue, 6 Apr 2010 09:12:38 pm Anton Blanchard wrote:
> The patch below changes things to call tty_kref_put once for every
> hvc_close call, and with that my machine boots fine.

Thanks, applied.

Cheers,
Rusty.

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Rusty Russell]

On Tue, 6 Apr 2010 09:12:38 pm Anton Blanchard wrote:
> The patch below changes things to call tty_kref_put once for every
> hvc_close call, and with that my machine boots fine.

Thanks, applied.

Cheers,
Rusty.

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Benjamin Herrenschmidt]

On Sun, 2010-03-21 at 08:04 +1100, Benjamin Herrenschmidt wrote:
> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > From: Amit Shah <amit.shah@redhat.com>
> > 
> > Alan pointed out a race in the code where hvc_remove is invoked. The
> > recent virtio_console work is the first user of hvc_remove().
> 
> This causes hangs during boot on pseries machines. Haven't had a chance
> to track that down yet, but please revert
> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

Linus, any chance you can revert that one for now until we figure out
what's wrong ?

Thanks !

Cheers,
Ben.

> Cheers,
> Ben.
> 
> 
> > Alan describes it thus:
> > 
> > The hvc_console assumes that a close and remove call can't occur at the
> > same time.
> > 
> > In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
> > itself....
> > 
> > So this can happen
> > 
> >         hvc_close                               hvc_remove
> >         hung up ? - no
> >                                                 lock
> >                                                 tty = hp->tty
> >                                                 unlock
> >         lock
> >         hp->tty = NULL
> >         unlock
> >         notify del
> >         kref_put the hvc struct
> >         close completes
> >         tty is destroyed
> >                                                 tty_hangup dead tty
> >                                                 tty->ops will be NULL
> >                                                 NULL->...
> > 
> > This patch adds some tty krefs and also converts to using tty_vhangup().
> > 
> > Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
> > Signed-off-by: Amit Shah <amit.shah@redhat.com>
> > CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
> > CC: linuxppc-dev@ozlabs.org
> > CC: Rusty Russell <rusty@rustcorp.com.au>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> > ---
> >  drivers/char/hvc_console.c |   31 +++++++++++++++++++++----------
> >  1 files changed, 21 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> > index 465185f..ba55bba 100644
> > --- a/drivers/char/hvc_console.c
> > +++ b/drivers/char/hvc_console.c
> > @@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
> >  	spin_lock_irqsave(&hp->lock, flags);
> >  	/* Check and then increment for fast path open. */
> >  	if (hp->count++ > 0) {
> > +		tty_kref_get(tty);
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> >  		hvc_kick();
> >  		return 0;
> > @@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
> >  
> >  	tty->driver_data = hp;
> >  
> > -	hp->tty = tty;
> > +	hp->tty = tty_kref_get(tty);
> >  
> >  	spin_unlock_irqrestore(&hp->lock, flags);
> >  
> > @@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
> >  		spin_lock_irqsave(&hp->lock, flags);
> >  		hp->tty = NULL;
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> > +		tty_kref_put(tty);
> >  		tty->driver_data = NULL;
> >  		kref_put(&hp->kref, destroy_hvc_struct);
> >  		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
> > @@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
> >  		return;
> >  
> >  	hp = tty->driver_data;
> > +
> >  	spin_lock_irqsave(&hp->lock, flags);
> > +	tty_kref_get(tty);
> >  
> >  	if (--hp->count == 0) {
> >  		/* We are done with the tty pointer now. */
> >  		hp->tty = NULL;
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> >  
> > +		/* Put the ref obtained in hvc_open() */
> > +		tty_kref_put(tty);
> > +
> >  		if (hp->ops->notifier_del)
> >  			hp->ops->notifier_del(hp, hp->data);
> >  
> > @@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> >  	}
> >  
> > +	tty_kref_put(tty);
> >  	kref_put(&hp->kref, destroy_hvc_struct);
> >  }
> >  
> > @@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
> >  	spin_unlock_irqrestore(&hp->lock, flags);
> >  
> >  	if (hp->ops->notifier_hangup)
> > -			hp->ops->notifier_hangup(hp, hp->data);
> > +		hp->ops->notifier_hangup(hp, hp->data);
> >  
> >  	while(temp_open_count) {
> >  		--temp_open_count;
> > +		tty_kref_put(tty);
> >  		kref_put(&hp->kref, destroy_hvc_struct);
> >  	}
> >  }
> > @@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
> >  	}
> >  
> >  	/* No tty attached, just skip */
> > -	tty = hp->tty;
> > +	tty = tty_kref_get(hp->tty);
> >  	if (tty == NULL)
> >  		goto bail;
> >  
> > @@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
> >  
> >  		tty_flip_buffer_push(tty);
> >  	}
> > +	if (tty)
> > +		tty_kref_put(tty);
> >  
> >  	return poll_mask;
> >  }
> > @@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
> >  	struct tty_struct *tty;
> >  
> >  	spin_lock_irqsave(&hp->lock, flags);
> > -	tty = hp->tty;
> > +	tty = tty_kref_get(hp->tty);
> >  
> >  	if (hp->index < MAX_NR_HVC_CONSOLES)
> >  		vtermnos[hp->index] = -1;
> > @@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
> >  	/*
> >  	 * We 'put' the instance that was grabbed when the kref instance
> >  	 * was initialized using kref_init().  Let the last holder of this
> > -	 * kref cause it to be removed, which will probably be the tty_hangup
> > +	 * kref cause it to be removed, which will probably be the tty_vhangup
> >  	 * below.
> >  	 */
> >  	kref_put(&hp->kref, destroy_hvc_struct);
> >  
> >  	/*
> > -	 * This function call will auto chain call hvc_hangup.  The tty should
> > -	 * always be valid at this time unless a simultaneous tty close already
> > -	 * cleaned up the hvc_struct.
> > +	 * This function call will auto chain call hvc_hangup.
> >  	 */
> > -	if (tty)
> > -		tty_hangup(tty);
> > +	if (tty) {
> > +		tty_vhangup(tty);
> > +		tty_kref_put(tty);
> > +	}
> >  	return 0;
> >  }
> >  EXPORT_SYMBOL_GPL(hvc_remove);
> 

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Benjamin Herrenschmidt]

On Sun, 2010-03-21 at 08:04 +1100, Benjamin Herrenschmidt wrote:
> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > From: Amit Shah <amit.shah@redhat.com>
> > 
> > Alan pointed out a race in the code where hvc_remove is invoked. The
> > recent virtio_console work is the first user of hvc_remove().
> 
> This causes hangs during boot on pseries machines. Haven't had a chance
> to track that down yet, but please revert
> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

Linus, any chance you can revert that one for now until we figure out
what's wrong ?

Thanks !

Cheers,
Ben.

> Cheers,
> Ben.
> 
> 
> > Alan describes it thus:
> > 
> > The hvc_console assumes that a close and remove call can't occur at the
> > same time.
> > 
> > In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
> > itself....
> > 
> > So this can happen
> > 
> >         hvc_close                               hvc_remove
> >         hung up ? - no
> >                                                 lock
> >                                                 tty = hp->tty
> >                                                 unlock
> >         lock
> >         hp->tty = NULL
> >         unlock
> >         notify del
> >         kref_put the hvc struct
> >         close completes
> >         tty is destroyed
> >                                                 tty_hangup dead tty
> >                                                 tty->ops will be NULL
> >                                                 NULL->...
> > 
> > This patch adds some tty krefs and also converts to using tty_vhangup().
> > 
> > Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
> > Signed-off-by: Amit Shah <amit.shah@redhat.com>
> > CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
> > CC: linuxppc-dev@ozlabs.org
> > CC: Rusty Russell <rusty@rustcorp.com.au>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
> > ---
> >  drivers/char/hvc_console.c |   31 +++++++++++++++++++++----------
> >  1 files changed, 21 insertions(+), 10 deletions(-)
> > 
> > diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
> > index 465185f..ba55bba 100644
> > --- a/drivers/char/hvc_console.c
> > +++ b/drivers/char/hvc_console.c
> > @@ -312,6 +312,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
> >  	spin_lock_irqsave(&hp->lock, flags);
> >  	/* Check and then increment for fast path open. */
> >  	if (hp->count++ > 0) {
> > +		tty_kref_get(tty);
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> >  		hvc_kick();
> >  		return 0;
> > @@ -319,7 +320,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
> >  
> >  	tty->driver_data = hp;
> >  
> > -	hp->tty = tty;
> > +	hp->tty = tty_kref_get(tty);
> >  
> >  	spin_unlock_irqrestore(&hp->lock, flags);
> >  
> > @@ -336,6 +337,7 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
> >  		spin_lock_irqsave(&hp->lock, flags);
> >  		hp->tty = NULL;
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> > +		tty_kref_put(tty);
> >  		tty->driver_data = NULL;
> >  		kref_put(&hp->kref, destroy_hvc_struct);
> >  		printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
> > @@ -363,13 +365,18 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
> >  		return;
> >  
> >  	hp = tty->driver_data;
> > +
> >  	spin_lock_irqsave(&hp->lock, flags);
> > +	tty_kref_get(tty);
> >  
> >  	if (--hp->count == 0) {
> >  		/* We are done with the tty pointer now. */
> >  		hp->tty = NULL;
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> >  
> > +		/* Put the ref obtained in hvc_open() */
> > +		tty_kref_put(tty);
> > +
> >  		if (hp->ops->notifier_del)
> >  			hp->ops->notifier_del(hp, hp->data);
> >  
> > @@ -389,6 +396,7 @@ static void hvc_close(struct tty_struct *tty, struct file * filp)
> >  		spin_unlock_irqrestore(&hp->lock, flags);
> >  	}
> >  
> > +	tty_kref_put(tty);
> >  	kref_put(&hp->kref, destroy_hvc_struct);
> >  }
> >  
> > @@ -424,10 +432,11 @@ static void hvc_hangup(struct tty_struct *tty)
> >  	spin_unlock_irqrestore(&hp->lock, flags);
> >  
> >  	if (hp->ops->notifier_hangup)
> > -			hp->ops->notifier_hangup(hp, hp->data);
> > +		hp->ops->notifier_hangup(hp, hp->data);
> >  
> >  	while(temp_open_count) {
> >  		--temp_open_count;
> > +		tty_kref_put(tty);
> >  		kref_put(&hp->kref, destroy_hvc_struct);
> >  	}
> >  }
> > @@ -592,7 +601,7 @@ int hvc_poll(struct hvc_struct *hp)
> >  	}
> >  
> >  	/* No tty attached, just skip */
> > -	tty = hp->tty;
> > +	tty = tty_kref_get(hp->tty);
> >  	if (tty == NULL)
> >  		goto bail;
> >  
> > @@ -672,6 +681,8 @@ int hvc_poll(struct hvc_struct *hp)
> >  
> >  		tty_flip_buffer_push(tty);
> >  	}
> > +	if (tty)
> > +		tty_kref_put(tty);
> >  
> >  	return poll_mask;
> >  }
> > @@ -807,7 +818,7 @@ int hvc_remove(struct hvc_struct *hp)
> >  	struct tty_struct *tty;
> >  
> >  	spin_lock_irqsave(&hp->lock, flags);
> > -	tty = hp->tty;
> > +	tty = tty_kref_get(hp->tty);
> >  
> >  	if (hp->index < MAX_NR_HVC_CONSOLES)
> >  		vtermnos[hp->index] = -1;
> > @@ -819,18 +830,18 @@ int hvc_remove(struct hvc_struct *hp)
> >  	/*
> >  	 * We 'put' the instance that was grabbed when the kref instance
> >  	 * was initialized using kref_init().  Let the last holder of this
> > -	 * kref cause it to be removed, which will probably be the tty_hangup
> > +	 * kref cause it to be removed, which will probably be the tty_vhangup
> >  	 * below.
> >  	 */
> >  	kref_put(&hp->kref, destroy_hvc_struct);
> >  
> >  	/*
> > -	 * This function call will auto chain call hvc_hangup.  The tty should
> > -	 * always be valid at this time unless a simultaneous tty close already
> > -	 * cleaned up the hvc_struct.
> > +	 * This function call will auto chain call hvc_hangup.
> >  	 */
> > -	if (tty)
> > -		tty_hangup(tty);
> > +	if (tty) {
> > +		tty_vhangup(tty);
> > +		tty_kref_put(tty);
> > +	}
> >  	return 0;
> >  }
> >  EXPORT_SYMBOL_GPL(hvc_remove);
> 

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Wed) Mar 24 2010 [21:45:44], Benjamin Herrenschmidt wrote:
> On Sun, 2010-03-21 at 08:04 +1100, Benjamin Herrenschmidt wrote:
> > On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > > From: Amit Shah <amit.shah@redhat.com>
> > > 
> > > Alan pointed out a race in the code where hvc_remove is invoked. The
> > > recent virtio_console work is the first user of hvc_remove().
> > 
> > This causes hangs during boot on pseries machines. Haven't had a chance
> > to track that down yet, but please revert
> > e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
> 
> Linus, any chance you can revert that one for now until we figure out
> what's wrong ?

Ben, can you confirm if the lockup you see is also due to the
task_is_waking() issue I found in a kvm guest?

That'll help me debug the issue.

Thanks.

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Wed) Mar 24 2010 [21:45:44], Benjamin Herrenschmidt wrote:
> On Sun, 2010-03-21 at 08:04 +1100, Benjamin Herrenschmidt wrote:
> > On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > > From: Amit Shah <amit.shah@redhat.com>
> > > 
> > > Alan pointed out a race in the code where hvc_remove is invoked. The
> > > recent virtio_console work is the first user of hvc_remove().
> > 
> > This causes hangs during boot on pseries machines. Haven't had a chance
> > to track that down yet, but please revert
> > e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
> 
> Linus, any chance you can revert that one for now until we figure out
> what's wrong ?

Ben, can you confirm if the lockup you see is also due to the
task_is_waking() issue I found in a kvm guest?

That'll help me debug the issue.

Thanks.

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Alan Cox]

On Sun, 21 Mar 2010 08:04:39 +1100
Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:

> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > From: Amit Shah <amit.shah@redhat.com>
> > 
> > Alan pointed out a race in the code where hvc_remove is invoked. The
> > recent virtio_console work is the first user of hvc_remove().
> 
> This causes hangs during boot on pseries machines. Haven't had a chance
> to track that down yet, but please revert
> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

Its an exploitable hole so we should revert both the bug fix *and* the
submission of the virtio console that makes the flaw triggerable, not jus
tthe security fix.

Alan

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Alan Cox]

On Sun, 21 Mar 2010 08:04:39 +1100
Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:

> On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > From: Amit Shah <amit.shah@redhat.com>
> > 
> > Alan pointed out a race in the code where hvc_remove is invoked. The
> > recent virtio_console work is the first user of hvc_remove().
> 
> This causes hangs during boot on pseries machines. Haven't had a chance
> to track that down yet, but please revert
> e74d098c66543d0731de62eb747ccd5b636a6f4c for now.

Its an exploitable hole so we should revert both the bug fix *and* the
submission of the virtio console that makes the flaw triggerable, not jus
tthe security fix.

Alan

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Wed) Mar 24 2010 [11:37:21], Alan Cox wrote:
> On Sun, 21 Mar 2010 08:04:39 +1100
> Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
> 
> > On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > > From: Amit Shah <amit.shah@redhat.com>
> > > 
> > > Alan pointed out a race in the code where hvc_remove is invoked. The
> > > recent virtio_console work is the first user of hvc_remove().
> > 
> > This causes hangs during boot on pseries machines. Haven't had a chance
> > to track that down yet, but please revert
> > e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
> 
> Its an exploitable hole so we should revert both the bug fix *and* the
> submission of the virtio console that makes the flaw triggerable, not jus
> tthe security fix.

If a fix isn't found in reasonable time, I will send a patch that
disables hot-unplug of virtio-console ports.

		Amit

Re: [PATCH 4/7] hvc_console: Fix race between hvc_close and hvc_remove

[Amit Shah]

On (Wed) Mar 24 2010 [11:37:21], Alan Cox wrote:
> On Sun, 21 Mar 2010 08:04:39 +1100
> Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
> 
> > On Fri, 2010-03-19 at 08:18 -0700, Greg Kroah-Hartman wrote:
> > > From: Amit Shah <amit.shah@redhat.com>
> > > 
> > > Alan pointed out a race in the code where hvc_remove is invoked. The
> > > recent virtio_console work is the first user of hvc_remove().
> > 
> > This causes hangs during boot on pseries machines. Haven't had a chance
> > to track that down yet, but please revert
> > e74d098c66543d0731de62eb747ccd5b636a6f4c for now.
> 
> Its an exploitable hole so we should revert both the bug fix *and* the
> submission of the virtio console that makes the flaw triggerable, not jus
> tthe security fix.

If a fix isn't found in reasonable time, I will send a patch that
disables hot-unplug of virtio-console ports.

		Amit

[PATCH 5/7] tty_buffer: Fix distinct type warning

[Greg Kroah-Hartman]

From: Fang Wenqi <anton.fang@gmail.com>

CC      drivers/char/tty_buffer.o
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’:
drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’:
drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast

Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and
					  tty_insert_flip_string_fixed_flag().

Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/tty_buffer.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index af8d977..7ee5216 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -248,7 +248,7 @@ int tty_insert_flip_string_fixed_flag(struct tty_struct *tty,
 {
 	int copied = 0;
 	do {
-		int goal = min(size - copied, TTY_BUFFER_PAGE);
+		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
 		int space = tty_buffer_request_room(tty, goal);
 		struct tty_buffer *tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
@@ -285,7 +285,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 {
 	int copied = 0;
 	do {
-		int goal = min(size - copied, TTY_BUFFER_PAGE);
+		int goal = min_t(size_t, size - copied, TTY_BUFFER_PAGE);
 		int space = tty_buffer_request_room(tty, goal);
 		struct tty_buffer *tb = tty->buf.tail;
 		/* If there is no space then tb may be NULL */
-- 
1.7.0.2

[PATCH 6/7] tty: cpm_uart: use resource_size()

[Greg Kroah-Hartman]

From: Tobias Klauser <tklauser@distanz.ch>

Use the resource_size function instead of manually calculating the
resource size.  This reduces the chance of introducing off-by-one errors.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kumar Gala <galak@gate.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/cpm_uart/cpm_uart_cpm2.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index a9802e7..722eac1 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -61,7 +61,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	void __iomem *pram;
 	unsigned long offset;
 	struct resource res;
-	unsigned long len;
+	resource_size_t len;
 
 	/* Don't remap parameter RAM if it has already been initialized
 	 * during console setup.
@@ -74,7 +74,7 @@ void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port,
 	if (of_address_to_resource(np, 1, &res))
 		return NULL;
 
-	len = 1 + res.end - res.start;
+	len = resource_size(&res);
 	pram = ioremap(res.start, len);
 	if (!pram)
 		return NULL;
-- 
1.7.0.2

[PATCH 7/7] tty_port,usb-console: Fix usb serial console open/close regression

[Greg Kroah-Hartman]

From: Jason Wessel <jason.wessel@windriver.com>

Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the
shutdown() operation") breaks the ability to use a usb console
starting in 2.6.33.  This was observed when using
console=ttyUSB0,115200 as a boot argument with an FTDI device.  The
error is:

ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22

The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in
tty_port_shutdown() it always clears the flag if it is set.  The fix
is to add a variable to the tty_port struct to indicate when the tty
port is a console.

CC: Alan Cox <alan@linux.intel.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/char/tty_port.c      |    2 +-
 drivers/usb/serial/console.c |    1 +
 include/linux/tty.h          |    1 +
 3 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c
index be492dd..a3bd1d0 100644
--- a/drivers/char/tty_port.c
+++ b/drivers/char/tty_port.c
@@ -119,7 +119,7 @@ EXPORT_SYMBOL(tty_port_tty_set);
 static void tty_port_shutdown(struct tty_port *port)
 {
 	mutex_lock(&port->mutex);
-	if (port->ops->shutdown &&
+	if (port->ops->shutdown && !port->console &&
 		test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags))
 			port->ops->shutdown(port);
 	mutex_unlock(&port->mutex);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index b22ac32..f347da2 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -181,6 +181,7 @@ static int usb_console_setup(struct console *co, char *options)
 	/* The console is special in terms of closing the device so
 	 * indicate this port is now acting as a system console. */
 	port->console = 1;
+	port->port.console = 1;
 
 	mutex_unlock(&serial->disc_mutex);
 	return retval;
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 593228a..4409967 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -224,6 +224,7 @@ struct tty_port {
 	wait_queue_head_t	close_wait;	/* Close waiters */
 	wait_queue_head_t	delta_msr_wait;	/* Modem status change */
 	unsigned long		flags;		/* TTY flags ASY_*/
+	unsigned char		console:1;	/* port is a console */
 	struct mutex		mutex;		/* Locking */
 	struct mutex		buf_mutex;	/* Buffer alloc lock */
 	unsigned char		*xmit_buf;	/* Optional buffer */
-- 
1.7.0.2