* [PATCH 1/2] x86: always use irq stacks
@ 2010-06-28 12:15 Christoph Hellwig
2010-06-29 10:21 ` [tip:x86/irq] x86: Always " tip-bot for Christoph Hellwig
0 siblings, 1 reply; 24+ messages in thread
From: Christoph Hellwig @ 2010-06-28 12:15 UTC (permalink / raw)
To: mingo, tglx; +Cc: linux-kernel
IRQ stacks provide much better safety against unexpected stack use from
interrupts, at the minimal downside of slightly higher memory usage.
Enable irq stacks also for the default 8k stack on 32-bit kernels to
minimize the problem of stack overflows through interrupt activity.
This is what the 64-bit kernel and various other architectures already do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Index: linux-2.6/arch/x86/Kconfig.debug
===================================================================
--- linux-2.6.orig/arch/x86/Kconfig.debug 2010-05-25 18:45:43.048276085 +0200
+++ linux-2.6/arch/x86/Kconfig.debug 2010-05-25 18:45:53.603003841 +0200
@@ -128,8 +128,7 @@ config 4KSTACKS
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
+ on the VM subsystem for higher order allocations.
config DOUBLEFAULT
default y
Index: linux-2.6/arch/x86/include/asm/irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/irq.h 2010-05-25 18:45:43.040025143 +0200
+++ linux-2.6/arch/x86/include/asm/irq.h 2010-05-25 18:45:53.604003981 +0200
@@ -19,18 +19,16 @@ static inline int irq_canonicalize(int i
# define ARCH_HAS_NMI_WATCHDOG
#endif
-#ifdef CONFIG_4KSTACKS
- extern void irq_ctx_init(int cpu);
- extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
+#ifdef CONFIG_X86_32
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
#else
# define irq_ctx_init(cpu) do { } while (0)
# define irq_ctx_exit(cpu) do { } while (0)
-# ifdef CONFIG_X86_64
-# define __ARCH_HAS_DO_SOFTIRQ
-# endif
#endif
+#define __ARCH_HAS_DO_SOFTIRQ
+
#ifdef CONFIG_HOTPLUG_CPU
#include <linux/cpumask.h>
extern void fixup_irqs(void);
Index: linux-2.6/arch/x86/kernel/irq_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/irq_32.c 2010-05-25 18:45:42.981006006 +0200
+++ linux-2.6/arch/x86/kernel/irq_32.c 2010-05-25 18:45:53.606003632 +0200
@@ -49,7 +49,6 @@ static inline int check_stack_overflow(v
static inline void print_stack_overflow(void) { }
#endif
-#ifdef CONFIG_4KSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
@@ -187,11 +186,6 @@ asmlinkage void do_softirq(void)
local_irq_restore(flags);
}
-#else
-static inline int
-execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
-#endif
-
bool handle_irq(unsigned irq, struct pt_regs *regs)
{
struct irq_desc *desc;
Index: linux-2.6/Documentation/x86/x86_64/kernel-stacks
===================================================================
--- linux-2.6.orig/Documentation/x86/x86_64/kernel-stacks 2010-05-25 18:45:55.631004120 +0200
+++ linux-2.6/Documentation/x86/x86_64/kernel-stacks 2010-05-25 18:46:21.785256528 +0200
@@ -18,9 +18,9 @@ specialized stacks contain no useful dat
Used for external hardware interrupts. If this is the first external
hardware interrupt (i.e. not a nested hardware interrupt) then the
kernel switches from the current task to the interrupt stack. Like
- the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS),
- this gives more room for kernel interrupt processing without having
- to increase the size of every per thread stack.
+ the split thread and interrupt stacks on i386, this gives more room
+ for kernel interrupt processing without having to increase the size
+ of every per thread stack.
The interrupt stack is also used when processing a softirq.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [tip:x86/irq] x86: Always use irq stacks
2010-06-28 12:15 [PATCH 1/2] x86: always use irq stacks Christoph Hellwig
@ 2010-06-29 10:21 ` tip-bot for Christoph Hellwig
2010-06-30 7:44 ` Ingo Molnar
2010-09-03 15:00 ` Ingo Molnar
0 siblings, 2 replies; 24+ messages in thread
From: tip-bot for Christoph Hellwig @ 2010-06-29 10:21 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, hch, tglx
Commit-ID: 7974891db234467eaf1fec613ec0129cb4ac2332
Gitweb: http://git.kernel.org/tip/7974891db234467eaf1fec613ec0129cb4ac2332
Author: Christoph Hellwig <hch@lst.de>
AuthorDate: Mon, 28 Jun 2010 14:15:54 +0200
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 29 Jun 2010 12:12:59 +0200
x86: Always use irq stacks
IRQ stacks provide much better safety against unexpected stack use from
interrupts, at the minimal downside of slightly higher memory usage.
Enable irq stacks also for the default 8k stack on 32-bit kernels to
minimize the problem of stack overflows through interrupt activity.
This is what the 64-bit kernel and various other architectures already do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
LKML-Reference: <20100628121554.GA6605@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
Documentation/x86/x86_64/kernel-stacks | 6 +++---
arch/x86/Kconfig.debug | 3 +--
arch/x86/include/asm/irq.h | 12 +++++-------
arch/x86/kernel/irq_32.c | 6 ------
4 files changed, 9 insertions(+), 18 deletions(-)
diff --git a/Documentation/x86/x86_64/kernel-stacks b/Documentation/x86/x86_64/kernel-stacks
index 5ad65d5..a01eec5 100644
--- a/Documentation/x86/x86_64/kernel-stacks
+++ b/Documentation/x86/x86_64/kernel-stacks
@@ -18,9 +18,9 @@ specialized stacks contain no useful data. The main CPU stacks are:
Used for external hardware interrupts. If this is the first external
hardware interrupt (i.e. not a nested hardware interrupt) then the
kernel switches from the current task to the interrupt stack. Like
- the split thread and interrupt stacks on i386 (with CONFIG_4KSTACKS),
- this gives more room for kernel interrupt processing without having
- to increase the size of every per thread stack.
+ the split thread and interrupt stacks on i386, this gives more room
+ for kernel interrupt processing without having to increase the size
+ of every per thread stack.
The interrupt stack is also used when processing a softirq.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 7508508..badda8e 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -128,8 +128,7 @@ config 4KSTACKS
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
running more threads on a system and also reduces the pressure
- on the VM subsystem for higher order allocations. This option
- will also use IRQ stacks to compensate for the reduced stackspace.
+ on the VM subsystem for higher order allocations.
config DOUBLEFAULT
default y
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 5458380..0bf5b00 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -19,18 +19,16 @@ static inline int irq_canonicalize(int irq)
# define ARCH_HAS_NMI_WATCHDOG
#endif
-#ifdef CONFIG_4KSTACKS
- extern void irq_ctx_init(int cpu);
- extern void irq_ctx_exit(int cpu);
-# define __ARCH_HAS_DO_SOFTIRQ
+#ifdef CONFIG_X86_32
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
#else
# define irq_ctx_init(cpu) do { } while (0)
# define irq_ctx_exit(cpu) do { } while (0)
-# ifdef CONFIG_X86_64
-# define __ARCH_HAS_DO_SOFTIRQ
-# endif
#endif
+#define __ARCH_HAS_DO_SOFTIRQ
+
#ifdef CONFIG_HOTPLUG_CPU
#include <linux/cpumask.h>
extern void fixup_irqs(void);
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 10709f2..67f5f9f 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -49,7 +49,6 @@ static inline int check_stack_overflow(void) { return 0; }
static inline void print_stack_overflow(void) { }
#endif
-#ifdef CONFIG_4KSTACKS
/*
* per-CPU IRQ handling contexts (thread information and stack)
*/
@@ -187,11 +186,6 @@ asmlinkage void do_softirq(void)
local_irq_restore(flags);
}
-#else
-static inline int
-execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq) { return 0; }
-#endif
-
bool handle_irq(unsigned irq, struct pt_regs *regs)
{
struct irq_desc *desc;
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-06-29 10:21 ` [tip:x86/irq] x86: Always " tip-bot for Christoph Hellwig
@ 2010-06-30 7:44 ` Ingo Molnar
2010-06-30 7:52 ` Christoph Hellwig
2010-09-03 15:00 ` Ingo Molnar
1 sibling, 1 reply; 24+ messages in thread
From: Ingo Molnar @ 2010-06-30 7:44 UTC (permalink / raw)
To: mingo, hpa, linux-kernel, hch, tglx; +Cc: linux-tip-commits
[-- Attachment #1: Type: text/plain, Size: 1785 bytes --]
* tip-bot for Christoph Hellwig <hch@lst.de> wrote:
> Commit-ID: 7974891db234467eaf1fec613ec0129cb4ac2332
> Gitweb: http://git.kernel.org/tip/7974891db234467eaf1fec613ec0129cb4ac2332
> Author: Christoph Hellwig <hch@lst.de>
> AuthorDate: Mon, 28 Jun 2010 14:15:54 +0200
> Committer: Thomas Gleixner <tglx@linutronix.de>
> CommitDate: Tue, 29 Jun 2010 12:12:59 +0200
>
> x86: Always use irq stacks
This commit is causing the following bootup crash in -tip testing:
async_continuing @ 1 after 0 usec
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
EXT3-fs: barriers not enabled
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#1]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d4a6>] EFLAGS: 00010002 CPU: 0
EIP is at print_context_stack+0x86/0x130
EAX: 00000000 EBX: c229cd80 ECX: 00000001 EDX: c229c000
ESI: 00000000 EDI: c1e74d9c EBP: c229cd4c ESP: c229cd28
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c10349df c229dffc c229cd94 ffffe000 c229c000 c229cd94 c229cd68 c1e74d9c
<0> c229c000 c229cd7c c102c0ff c1e74d9c f72aa150 00000000 c229cd6c c229cd6c
<0> c2cd6fa0 00000000 f72aa150 f72aa120 f72aa174 c229cd94 c10349df c229cd7c
Call Trace:
[<c10349df>] ? save_stack_trace+0x2f/0x50
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#2]
Reverting 7974891db2 and dcfa72628 makes the crash go away.
Full crashlog and config attached.
Ingo
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: crash.log --]
[-- Type: text/plain; charset=unknown-8bit, Size: 225147 bytes --]
Linux version 2.6.35-rc3-tip-01298-g53cd4ef-dirty (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #13969 Wed Jun 30 02:08:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
debug: ignoring loglevel setting.
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 02800000
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at [c00f5680] f5680
mpc: f1400-f152c
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003fff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
free_area_init_node: node 0, pgdat c235e320, node_mem_map c25f5200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 272 pages used for memmap
HighMem zone: 34530 pages, LIFO batch:7
Using APIC driver default
SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
mpc: f1400-f152c
MPTABLE: OEM ID: OEM00000
MPTABLE: Product ID: PROD00000000
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #1
ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is PCI
Bus #5 is PCI
Bus #6 is ISA
I/O APIC #2 Version 17 at 0xFEC00000.
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Int: type 0, pol 3, trig 3, bus 00, IRQ 28, APIC ID 2, APIC INT 0b
Int: type 0, pol 3, trig 3, bus 00, IRQ 10, APIC ID 2, APIC INT 03
Int: type 0, pol 3, trig 3, bus 01, IRQ 00, APIC ID 2, APIC INT 05
Int: type 0, pol 3, trig 3, bus 05, IRQ 1c, APIC ID 2, APIC INT 0b
Int: type 3, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 06, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 06, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 06, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 06, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 06, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 06, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 06, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 06, IRQ 0a, APIC ID 2, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 06, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 06, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 06, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 06, IRQ 0f, APIC ID 2, APIC INT 0f
Lint: type 3, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 00, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 1
mapped APIC to ffffa000 (fee00000)
mapped IOAPIC to ffff9000 (fec00000)
nr_irqs_gsi: 40
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
sysrq: sysrq always enabled.
early_res array is doubled to 64 at [11000 - 117ff]
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (32 early reservations)
#1 [0001000000 - 00025e80e0] TEXT DATA BSS
#2 [00025e9000 - 00025f3149] BRK
#3 [00000f5690 - 0000100000] BIOS reserved
#4 [00000f5680 - 00000f5690] MP-table mpf
#5 [000009f800 - 00000f1400] BIOS reserved
#6 [00000f152c - 00000f5680] BIOS reserved
#7 [00000f1400 - 00000f152c] MP-table mpc
#8 [0000010000 - 0000011000] PGTABLE
#9 [00025f4000 - 00025f5000] BOOTMEM
#10 [00025f5000 - 0002df5000] BOOTMEM
#11 [00025e80e0 - 00025e80e4] BOOTMEM
#12 [00025e80f0 - 00025e8170] BOOTMEM
#13 [00025e8170 - 00025e81c4] BOOTMEM
#14 [0002df5000 - 0002df7000] BOOTMEM
#15 [00025e81d0 - 00025e81e0] BOOTMEM
#16 [00025e81e0 - 00025e89e0] BOOTMEM
#17 [00025e89e0 - 00025e8a07] BOOTMEM
#18 [00025e8a10 - 00025e8b0c] BOOTMEM
#19 [00025e8b10 - 00025e8b50] BOOTMEM
#20 [00025e8b50 - 00025e8b90] BOOTMEM
#21 [00025e8b90 - 00025e8bd0] BOOTMEM
#22 [00025e8bd0 - 00025e8c10] BOOTMEM
#23 [00025e8c10 - 00025e8c50] BOOTMEM
#24 [00025e8c50 - 00025e8c90] BOOTMEM
#25 [00025e8c90 - 00025e8cd0] BOOTMEM
#26 [00025e8cd0 - 00025e8d10] BOOTMEM
#27 [00025e8d10 - 00025e8dc5] BOOTMEM
#28 [00025e8dd0 - 00025e8e85] BOOTMEM
#29 [0002df7000 - 0002dfb000] BOOTMEM
#30 [0002dfb000 - 0002e7b000] BOOTMEM
#31 [0002e7b000 - 0002ebb000] BOOTMEM
Initializing HighMem for node 0 (000377fe:0003fff0)
Memory: 1016588k/1048512k available (14779k kernel code, 31472k reserved, 5280k data, 788k init, 139208k highmem)
virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc2397000 - 0xc245c000 ( 788 kB)
.data : 0xc1e6eed7 - 0xc2396f60 (5280 kB)
.text : 0xc1000000 - 0xc1e6eed7 (14779 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
Hierarchical RCU autobalancing is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:288
CPU 0 irqstacks, hard=c2299000 soft=c229b000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
Fast TSC calibration using PIT
Detected 2010.493 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.98 BogoMIPS (lpj=8041972)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 47062 entries in 93 pages
calling spawn_ksoftirqd+0x0/0x30 @ 1
initcall spawn_ksoftirqd+0x0/0x30 returned 0 after 0 usecs
calling relay_init+0x0/0x7 @ 1
initcall relay_init+0x0/0x7 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x163 @ 1
initcall tracer_alloc_buffers+0x0/0x163 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
calling trace_workqueue_early_init+0x0/0xba @ 1
initcall trace_workqueue_early_init+0x0/0xba returned 0 after 0 usecs
calling mce_amd_init+0x0/0x28 @ 1
initcall mce_amd_init+0x0/0x28 returned 0 after 0 usecs
Enabling APIC mode: Flat. Using 1 I/O APICs
enabled ExtINT on CPU#0
ExtINT not setup in hardware but reported by MP table
ENABLING IO-APIC IRQs
init IO_APIC IRQs
2-0 (apicid-pin) not connected
IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-3 -> 0x29 -> IRQ 27 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 29 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 35 Mode:1 Active:1)
IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0)
IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
2-16 2-17 2-18 2-19 2-20 2-21 2-22 2-23 (apicid-pin) not connected
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
Using local APIC timer interrupts.
calibrating APIC timer ...
... lapic delta = 1256509
..... delta 1256509
..... mult: 53963277
..... calibration result: 804165
..... CPU clock speed is 2010.1660 MHz.
..... host bus clock speed is 201.0165 MHz.
... verify APIC timer
... jiffies delta = 25
... jiffies result ok
devtmpfs: initialized
calling init_mmap_min_addr+0x0/0x24 @ 1
initcall init_mmap_min_addr+0x0/0x24 returned 0 after 0 usecs
calling init_cpufreq_transition_notifier_list+0x0/0x18 @ 1
initcall init_cpufreq_transition_notifier_list+0x0/0x18 returned 0 after 0 usecs
calling net_ns_init+0x0/0xf2 @ 1
initcall net_ns_init+0x0/0xf2 returned 0 after 0 usecs
calling cpufreq_tsc+0x0/0x25 @ 1
initcall cpufreq_tsc+0x0/0x25 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x11 @ 1
initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
calling reboot_init+0x0/0x11 @ 1
initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
calling sysctl_init+0x0/0x28 @ 1
initcall sysctl_init+0x0/0x28 returned 0 after 0 usecs
calling ksysfs_init+0x0/0x74 @ 1
initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
calling async_init+0x0/0x5c @ 1
initcall async_init+0x0/0x5c returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xf @ 1
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
calling init_ftrace_syscalls+0x0/0x89 @ 1
initcall init_ftrace_syscalls+0x0/0x89 returned 0 after 0 usecs
calling init_hw_breakpoint+0x0/0x42 @ 1
initcall init_hw_breakpoint+0x0/0x42 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x14 @ 1
initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs
calling filelock_init+0x0/0x2f @ 1
initcall filelock_init+0x0/0x2f returned 0 after 0 usecs
calling init_aout_binfmt+0x0/0x11 @ 1
initcall init_aout_binfmt+0x0/0x11 returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x35 @ 1
initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x11 @ 1
initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x11 @ 1
initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
calling debugfs_init+0x0/0x4a @ 1
initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
calling securityfs_init+0x0/0x41 @ 1
initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
calling random32_init+0x0/0x7f @ 1
initcall random32_init+0x0/0x7f returned 0 after 0 usecs
calling sfi_sysfs_init+0x0/0xbc @ 1
initcall sfi_sysfs_init+0x0/0xbc returned 0 after 0 usecs
calling virtio_init+0x0/0x30 @ 1
initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
calling cpufreq_core_init+0x0/0x41 @ 1
initcall cpufreq_core_init+0x0/0x41 returned 0 after 0 usecs
calling sock_init+0x0/0x59 @ 1
initcall sock_init+0x0/0x59 returned 0 after 0 usecs
calling net_inuse_init+0x0/0x24 @ 1
initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
calling netpoll_init+0x0/0x25 @ 1
initcall netpoll_init+0x0/0x25 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x173 @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x173 returned 0 after 0 usecs
calling bdi_class_init+0x0/0x40 @ 1
initcall bdi_class_init+0x0/0x40 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x1e @ 1
initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
calling gpiolib_sysfs_init+0x0/0x86 @ 1
initcall gpiolib_sysfs_init+0x0/0x86 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x14 @ 1
initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
calling pci_driver_init+0x0/0xf @ 1
initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
calling backlight_class_init+0x0/0x53 @ 1
initcall backlight_class_init+0x0/0x53 returned 0 after 0 usecs
calling video_output_class_init+0x0/0x14 @ 1
initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
calling tty_class_init+0x0/0x2f @ 1
initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc2 @ 1
initcall vtconsole_class_init+0x0/0xc2 returned 0 after 0 usecs
calling spi_init+0x0/0x98 @ 1
initcall spi_init+0x0/0x98 returned 0 after 0 usecs
calling i2c_init+0x0/0x57 @ 1
i2c-core: driver [dummy] registered
initcall i2c_init+0x0/0x57 returned 0 after 3906 usecs
calling eisa_init+0x0/0x29 @ 1
EISA bus registered
initcall eisa_init+0x0/0x29 returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x39 @ 1
node 0 link 0: io port [1000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [feb00000, fec0ffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, fed3ffff]
bus: [00, ff] on node 0 link 0
bus: 00 index 0 [io 0x0000-0xffff]
bus: 00 index 1 [mem 0x40000000-0xffffffff]
bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff]
bus: 00 index 3 [mem 0x000a0000-0x000bffff]
initcall amd_postcore_init+0x0/0x39 returned 0 after 39062 usecs
calling arch_kdebugfs_init+0x0/0x1e @ 1
initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
calling init_pit_clocksource+0x0/0x8b @ 1
initcall init_pit_clocksource+0x0/0x8b returned 0 after 0 usecs
calling mtrr_if_init+0x0/0x4d @ 1
initcall mtrr_if_init+0x0/0x4d returned 0 after 0 usecs
calling dmi_id_init+0x0/0x2bd @ 1
initcall dmi_id_init+0x0/0x2bd returned 0 after 0 usecs
calling dma_bus_init+0x0/0x32 @ 1
initcall dma_bus_init+0x0/0x32 returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xdf @ 1
initcall dma_channel_table_init+0x0/0xdf returned 0 after 0 usecs
calling dca_init+0x0/0x21 @ 1
dca service started, version 1.12.1
initcall dca_init+0x0/0x21 returned 0 after 3906 usecs
calling pci_arch_init+0x0/0x65 @ 1
PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
PCI: Using configuration type 1 for base access
initcall pci_arch_init+0x0/0x65 returned 0 after 11718 usecs
calling topology_init+0x0/0x13 @ 1
initcall topology_init+0x0/0x13 returned 0 after 0 usecs
calling mtrr_init_finialize+0x0/0x35 @ 1
initcall mtrr_init_finialize+0x0/0x35 returned 0 after 0 usecs
calling mca_init+0x0/0x28c @ 1
initcall mca_init+0x0/0x28c returned -19 after 0 usecs
calling param_sysfs_init+0x0/0x347 @ 1
initcall param_sysfs_init+0x0/0x347 returned 0 after 39062 usecs
calling pm_sysrq_init+0x0/0x20 @ 1
initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
calling audit_watch_init+0x0/0x1b @ 1
audit: cannot initialize inotify handle
initcall audit_watch_init+0x0/0x1b returned 0 after 3906 usecs
calling init_slow_work+0x0/0x67 @ 1
initcall init_slow_work+0x0/0x67 returned 0 after 0 usecs
calling default_bdi_init+0x0/0xac @ 1
initcall default_bdi_init+0x0/0xac returned 0 after 0 usecs
calling init_bio+0x0/0xe7 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xe7 returned 0 after 3906 usecs
calling fsnotify_init+0x0/0xf @ 1
initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0xe6 @ 1
initcall fsnotify_notification_init+0x0/0xe6 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0xf @ 1
initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
calling blk_settings_init+0x0/0x1d @ 1
initcall blk_settings_init+0x0/0x1d returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x2f @ 1
initcall blk_ioc_init+0x0/0x2f returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x2a @ 1
initcall blk_softirq_init+0x0/0x2a returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x2a @ 1
initcall blk_iopoll_setup+0x0/0x2a returned 0 after 0 usecs
calling genhd_device_init+0x0/0x50 @ 1
initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x2f @ 1
initcall blk_dev_integrity_init+0x0/0x2f returned 0 after 0 usecs
calling gpiolib_debugfs_init+0x0/0x2a @ 1
initcall gpiolib_debugfs_init+0x0/0x2a returned 0 after 0 usecs
calling max7301_init+0x0/0xf @ 1
initcall max7301_init+0x0/0xf returned 0 after 0 usecs
calling mc33880_init+0x0/0xf @ 1
initcall mc33880_init+0x0/0xf returned 0 after 0 usecs
calling pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling fbmem_init+0x0/0x96 @ 1
initcall fbmem_init+0x0/0x96 returned 0 after 0 usecs
calling misc_init+0x0/0xad @ 1
initcall misc_init+0x0/0xad returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x75 @ 1
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x75 returned 0 after 0 usecs
calling cn_init+0x0/0x9d @ 1
initcall cn_init+0x0/0x9d returned 0 after 0 usecs
calling tifm_init+0x0/0x81 @ 1
initcall tifm_init+0x0/0x81 returned 0 after 0 usecs
calling init_scsi+0x0/0x90 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x90 returned 0 after 3906 usecs
calling ata_init+0x0/0x2b9 @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x2b9 returned 0 after 0 usecs
calling phy_init+0x0/0x2a @ 1
initcall phy_init+0x0/0x2a returned 0 after 0 usecs
calling usb_init+0x0/0x156 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x156 returned 0 after 11718 usecs
calling serio_init+0x0/0x8b @ 1
initcall serio_init+0x0/0x8b returned 0 after 0 usecs
calling gameport_init+0x0/0x8b @ 1
initcall gameport_init+0x0/0x8b returned 0 after 0 usecs
calling input_init+0x0/0x127 @ 1
initcall input_init+0x0/0x127 returned 0 after 0 usecs
calling i2c_gpio_init+0x0/0x2e @ 1
initcall i2c_gpio_init+0x0/0x2e returned 0 after 0 usecs
calling init_dvbdev+0x0/0xc2 @ 1
initcall init_dvbdev+0x0/0xc2 returned 0 after 0 usecs
calling power_supply_class_init+0x0/0x39 @ 1
initcall power_supply_class_init+0x0/0x39 returned 0 after 3906 usecs
calling thermal_init+0x0/0x32 @ 1
initcall thermal_init+0x0/0x32 returned 0 after 0 usecs
calling mmc_init+0x0/0x7a @ 1
initcall mmc_init+0x0/0x7a returned 0 after 0 usecs
calling leds_init+0x0/0x3d @ 1
initcall leds_init+0x0/0x3d returned 0 after 0 usecs
calling init_soundcore+0x0/0x8c @ 1
initcall init_soundcore+0x0/0x8c returned 0 after 0 usecs
calling alsa_sound_init+0x0/0xac @ 1
Advanced Linux Sound Architecture Driver Version 1.0.23.
initcall alsa_sound_init+0x0/0xac returned 0 after 3906 usecs
calling ac97_bus_init+0x0/0xf @ 1
initcall ac97_bus_init+0x0/0xf returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x44 @ 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f]
pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff]
pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
PCI: peer root bus 00 res updated from pci conf
pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff]
pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
Clocksource tsc unstable (delta = 87321875 ns)
pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 01-01]
pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:00.0: default IRQ router [10de:005e]
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff]
Expanded resource reserved due to conflict with PCI Bus #00
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x44 returned 0 after 292968 usecs
calling proto_init+0x0/0xf @ 1
initcall proto_init+0x0/0xf returned 0 after 0 usecs
calling net_dev_init+0x0/0x125 @ 1
initcall net_dev_init+0x0/0x125 returned 0 after 0 usecs
calling neigh_init+0x0/0x7c @ 1
initcall neigh_init+0x0/0x7c returned 0 after 0 usecs
calling fib_rules_init+0x0/0xa4 @ 1
initcall fib_rules_init+0x0/0xa4 returned 0 after 0 usecs
calling genl_init+0x0/0x7f @ 1
initcall genl_init+0x0/0x7f returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x54 @ 1
initcall cipso_v4_init+0x0/0x54 returned 0 after 0 usecs
calling wanrouter_init+0x0/0x5a @ 1
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
initcall wanrouter_init+0x0/0x5a returned 0 after 3906 usecs
calling atm_init+0x0/0xd7 @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0xd7 returned 0 after 3906 usecs
calling cfg80211_init+0x0/0xc2 @ 1
cfg80211: Calling CRDA to update world regulatory domain
initcall cfg80211_init+0x0/0xc2 returned 0 after 7812 usecs
calling wireless_nlevent_init+0x0/0xf @ 1
initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
calling ieee80211_init+0x0/0x25 @ 1
initcall ieee80211_init+0x0/0x25 returned 0 after 0 usecs
calling netlbl_init+0x0/0x7d @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x7d returned 0 after 15625 usecs
calling rfkill_init+0x0/0x66 @ 1
initcall rfkill_init+0x0/0x66 returned 0 after 0 usecs
calling sysctl_init+0x0/0x3b @ 1
initcall sysctl_init+0x0/0x3b returned 0 after 0 usecs
calling print_ICs+0x0/0x4c6 @ 1
printing PIC contents
... PIC IMR: fffa
... PIC IRR: 0001
... PIC ISR: 0001
... PIC ELCR: 0828
printing local APIC contents on CPU#0/0:
... APIC ID: 00000000 (0)
... APIC VERSION: 00040010
... APIC TASKPRI: 00000000 (00)
... APIC ARBPRI: 000000e0 (e0)
... APIC PROCPRI: 00000000
... APIC LDR: 01000000
... APIC DFR: ffffffff
... APIC SPIV: 000001ff
... APIC ISR field:
0000000000000000000000000000000000000000000000000000000000000000
... APIC TMR field:
0000000000000000000000000000000000000000000000000000000000000000
... APIC IRR field:
0000000000000000000000000000000000000000000000000000000000008000
... APIC ESR: 00000000
... APIC ICR: 0000c650
... APIC ICR2: 01000000
... APIC LVTT: 000200ef
... APIC LVTPC: 00000400
... APIC LVT0: 00010700
... APIC LVT1: 00000400
... APIC LVTERR: 000000fe
... APIC TMICT: 0000c454
... APIC TMCCT: 0000aa1b
... APIC TDCR: 00000003
number of MP IRQ sources: 17.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 00000000
....... : physical APIC id: 00
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00170011
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
00 001 0 0 0 0 0 1 1 30
01 001 0 0 0 0 0 1 1 31
02 000 1 0 0 0 0 0 0 00
03 001 1 1 0 1 0 1 1 29
04 001 0 0 0 0 0 1 1 34
05 001 1 1 0 1 0 1 1 41
06 001 0 0 0 0 0 1 1 36
07 001 1 0 0 0 0 1 1 37
08 001 0 0 0 0 0 1 1 38
09 001 0 0 0 0 0 1 1 39
0a 001 0 0 0 0 0 1 1 3A
0b 001 1 1 0 1 0 1 1 49
0c 001 0 0 0 0 0 1 1 3C
0d 001 0 0 0 0 0 1 1 3D
0e 001 0 0 0 0 0 1 1 3E
0f 001 0 0 0 0 0 1 1 3F
10 000 1 0 0 0 0 0 0 00
11 000 1 0 0 0 0 0 0 00
12 000 1 0 0 0 0 0 0 00
13 000 1 0 0 0 0 0 0 00
14 000 1 0 0 0 0 0 0 00
15 000 1 0 0 0 0 0 0 00
16 000 1 0 0 0 0 0 0 00
17 000 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ27 -> 0:3
IRQ29 -> 0:5
IRQ35 -> 0:11
.................................... done.
initcall print_ICs+0x0/0x4c6 returned 0 after 171875 usecs
calling hpet_late_init+0x0/0x5f @ 1
initcall hpet_late_init+0x0/0x5f returned -19 after 0 usecs
calling init_k8_nbs+0x0/0x24 @ 1
initcall init_k8_nbs+0x0/0x24 returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x4f @ 1
initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs
calling ftrace_init_debugfs+0x0/0xdd @ 1
initcall ftrace_init_debugfs+0x0/0xdd returned 0 after 0 usecs
calling rb_init_debugfs+0x0/0x2f @ 1
initcall rb_init_debugfs+0x0/0x2f returned 0 after 0 usecs
calling tracer_init_debugfs+0x0/0x2f9 @ 1
initcall tracer_init_debugfs+0x0/0x2f9 returned 0 after 0 usecs
calling init_trace_printk_function_export+0x0/0x33 @ 1
initcall init_trace_printk_function_export+0x0/0x33 returned 0 after 0 usecs
calling stat_workqueue_init+0x0/0x2b @ 1
initcall stat_workqueue_init+0x0/0x2b returned 0 after 0 usecs
calling event_trace_init+0x0/0x270 @ 1
initcall event_trace_init+0x0/0x270 returned 0 after 23437 usecs
calling init_pipe_fs+0x0/0x3d @ 1
initcall init_pipe_fs+0x0/0x3d returned 0 after 0 usecs
calling eventpoll_init+0x0/0xa1 @ 1
initcall eventpoll_init+0x0/0xa1 returned 0 after 0 usecs
calling anon_inode_init+0x0/0xf9 @ 1
initcall anon_inode_init+0x0/0xf9 returned 0 after 0 usecs
calling fscache_init+0x0/0xa5 @ 1
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
initcall fscache_init+0x0/0xa5 returned 0 after 7812 usecs
calling tomoyo_initerface_init+0x0/0x154 @ 1
initcall tomoyo_initerface_init+0x0/0x154 returned 0 after 0 usecs
calling blk_scsi_ioctl_init+0x0/0x288 @ 1
initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
calling chr_dev_init+0x0/0xcc @ 1
initcall chr_dev_init+0x0/0xcc returned 0 after 0 usecs
calling firmware_class_init+0x0/0x14 @ 1
initcall firmware_class_init+0x0/0x14 returned 0 after 0 usecs
calling ieee1394_init+0x0/0x21e @ 1
initcall ieee1394_init+0x0/0x21e returned 0 after 0 usecs
calling cpufreq_gov_performance_init+0x0/0xf @ 1
initcall cpufreq_gov_performance_init+0x0/0xf returned 0 after 0 usecs
calling cpufreq_gov_userspace_init+0x0/0xf @ 1
initcall cpufreq_gov_userspace_init+0x0/0xf returned 0 after 0 usecs
calling ssb_modinit+0x0/0x5a @ 1
initcall ssb_modinit+0x0/0x5a returned 0 after 0 usecs
calling pcibios_assign_resources+0x0/0x6b @ 1
pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x400000ff]
pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x400000ff] (PCI address [0x40000000-0x400000ff]
pci 0000:00:09.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem disabled]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 01-01]
pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x40000000-0xffffffff]
pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff]
pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
initcall pcibios_assign_resources+0x0/0x6b returned 0 after 160156 usecs
calling sysctl_core_init+0x0/0x2d @ 1
initcall sysctl_core_init+0x0/0x2d returned 0 after 0 usecs
calling inet_init+0x0/0x249 @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
initcall inet_init+0x0/0x249 returned 0 after 27343 usecs
calling af_unix_init+0x0/0x4d @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4d returned 0 after 3906 usecs
calling init_sunrpc+0x0/0x53 @ 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x53 returned 0 after 11718 usecs
calling pci_apply_final_quirks+0x0/0x10a @ 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x10a returned 0 after 19531 usecs
calling default_rootfs+0x0/0x75 @ 1
initcall default_rootfs+0x0/0x75 returned 0 after 0 usecs
calling pci_iommu_init+0x0/0x21 @ 1
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
initcall pci_iommu_init+0x0/0x21 returned 0 after 31250 usecs
calling irqfd_module_init+0x0/0x3d @ 1
initcall irqfd_module_init+0x0/0x3d returned 0 after 0 usecs
calling i8259A_init_sysfs+0x0/0x1d @ 1
initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 0 usecs
calling sbf_init+0x0/0xe3 @ 1
initcall sbf_init+0x0/0xe3 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x1d @ 1
initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 0 usecs
calling add_rtc_cmos+0x0/0x47 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0x47 returned 0 after 3906 usecs
calling cache_sysfs_init+0x0/0x1ff @ 1
initcall cache_sysfs_init+0x0/0x1ff returned 0 after 0 usecs
calling mcheck_init_device+0x0/0x1c7 @ 1
initcall mcheck_init_device+0x0/0x1c7 returned 0 after 0 usecs
calling threshold_init_device+0x0/0x38 @ 1
initcall threshold_init_device+0x0/0x38 returned 0 after 0 usecs
calling inject_init+0x0/0x30 @ 1
Machine check injector initialized
initcall inject_init+0x0/0x30 returned 0 after 3906 usecs
calling thermal_throttle_init_device+0x0/0x37 @ 1
initcall thermal_throttle_init_device+0x0/0x37 returned 0 after 0 usecs
calling powernow_k6_init+0x0/0x8b @ 1
initcall powernow_k6_init+0x0/0x8b returned -19 after 0 usecs
calling eps_init+0x0/0x3d @ 1
initcall eps_init+0x0/0x3d returned -19 after 0 usecs
calling elanfreq_init+0x0/0x36 @ 1
elanfreq: error: no Elan processor found!
initcall elanfreq_init+0x0/0x36 returned -19 after 3906 usecs
calling sc520_freq_init+0x0/0x88 @ 1
initcall sc520_freq_init+0x0/0x88 returned -19 after 0 usecs
calling longrun_init+0x0/0x28 @ 1
initcall longrun_init+0x0/0x28 returned -19 after 0 usecs
calling cpufreq_gx_init+0x0/0x1d7 @ 1
initcall cpufreq_gx_init+0x0/0x1d7 returned -19 after 0 usecs
calling speedstep_init+0x0/0x119 @ 1
initcall speedstep_init+0x0/0x119 returned -19 after 0 usecs
calling nforce2_init+0x0/0x6f @ 1
cpufreq-nforce2: No nForce2 chipset.
initcall nforce2_init+0x0/0x6f returned -19 after 3906 usecs
calling msr_init+0x0/0xe7 @ 1
initcall msr_init+0x0/0xe7 returned 0 after 0 usecs
calling cpuid_init+0x0/0xe7 @ 1
initcall cpuid_init+0x0/0xe7 returned 0 after 0 usecs
calling ioapic_init_sysfs+0x0/0x89 @ 1
initcall ioapic_init_sysfs+0x0/0x89 returned 0 after 0 usecs
calling add_pcspkr+0x0/0x2f @ 1
initcall add_pcspkr+0x0/0x2f returned 0 after 0 usecs
calling start_periodic_check_for_corruption+0x0/0x40 @ 1
initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 0 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 0 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 0 usecs
calling proc_execdomains_init+0x0/0x27 @ 1
initcall proc_execdomains_init+0x0/0x27 returned 0 after 0 usecs
calling ioresources_init+0x0/0x44 @ 1
initcall ioresources_init+0x0/0x44 returned 0 after 0 usecs
calling uid_cache_init+0x0/0x79 @ 1
initcall uid_cache_init+0x0/0x79 returned 0 after 0 usecs
calling init_posix_timers+0x0/0x157 @ 1
initcall init_posix_timers+0x0/0x157 returned 0 after 0 usecs
calling init_posix_cpu_timers+0x0/0xb7 @ 1
initcall init_posix_cpu_timers+0x0/0xb7 returned 0 after 0 usecs
calling nsproxy_cache_init+0x0/0x32 @ 1
initcall nsproxy_cache_init+0x0/0x32 returned 0 after 0 usecs
calling create_proc_profile+0x0/0x60 @ 1
initcall create_proc_profile+0x0/0x60 returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x1d @ 1
initcall timekeeping_init_device+0x0/0x1d returned 0 after 0 usecs
calling init_clocksource_sysfs+0x0/0x43 @ 1
initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 0 usecs
calling init_timer_list_procfs+0x0/0x30 @ 1
initcall init_timer_list_procfs+0x0/0x30 returned 0 after 0 usecs
calling futex_init+0x0/0x76 @ 1
initcall futex_init+0x0/0x76 returned 0 after 0 usecs
calling proc_dma_init+0x0/0x27 @ 1
initcall proc_dma_init+0x0/0x27 returned 0 after 0 usecs
calling kallsyms_init+0x0/0x2a @ 1
initcall kallsyms_init+0x0/0x2a returned 0 after 0 usecs
calling crash_save_vmcoreinfo_init+0x0/0x4b4 @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x4b4 returned 0 after 0 usecs
calling crash_notes_memory_init+0x0/0x35 @ 1
initcall crash_notes_memory_init+0x0/0x35 returned 0 after 0 usecs
calling audit_init+0x0/0x117 @ 1
audit: initializing netlink socket (disabled)
type=2000 audit(1277895987.604:1): initialized
initcall audit_init+0x0/0x117 returned 0 after 7812 usecs
calling utsname_sysctl_init+0x0/0x11 @ 1
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 0 usecs
calling ftrace_mod_cmd_init+0x0/0xf @ 1
initcall ftrace_mod_cmd_init+0x0/0xf returned 0 after 0 usecs
calling init_events+0x0/0x5d @ 1
initcall init_events+0x0/0x5d returned 0 after 0 usecs
calling init_sched_switch_trace+0x0/0xf @ 1
initcall init_sched_switch_trace+0x0/0xf returned 0 after 0 usecs
calling init_function_trace+0x0/0x35 @ 1
initcall init_function_trace+0x0/0x35 returned 0 after 0 usecs
calling init_irqsoff_tracer+0x0/0x11 @ 1
initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 0 usecs
calling init_wakeup_tracer+0x0/0x1d @ 1
initcall init_wakeup_tracer+0x0/0x1d returned 0 after 0 usecs
calling stack_trace_init+0x0/0x68 @ 1
initcall stack_trace_init+0x0/0x68 returned 0 after 0 usecs
calling init_mmio_trace+0x0/0xf @ 1
initcall init_mmio_trace+0x0/0xf returned 0 after 0 usecs
calling init_graph_trace+0x0/0x6a @ 1
initcall init_graph_trace+0x0/0x6a returned 0 after 0 usecs
calling init_blk_tracer+0x0/0x56 @ 1
initcall init_blk_tracer+0x0/0x56 returned 0 after 0 usecs
calling init_ksym_trace+0x0/0x5d @ 1
initcall init_ksym_trace+0x0/0x5d returned 0 after 0 usecs
calling perf_event_sysfs_init+0x0/0x14 @ 1
initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 0 usecs
calling init_per_zone_wmark_min+0x0/0x67 @ 1
initcall init_per_zone_wmark_min+0x0/0x67 returned 0 after 0 usecs
calling kswapd_init+0x0/0x13 @ 1
initcall kswapd_init+0x0/0x13 returned 0 after 0 usecs
calling setup_vmstat+0x0/0x8a @ 1
initcall setup_vmstat+0x0/0x8a returned 0 after 0 usecs
calling mm_sysfs_init+0x0/0x22 @ 1
initcall mm_sysfs_init+0x0/0x22 returned 0 after 0 usecs
calling proc_vmalloc_init+0x0/0x2a @ 1
initcall proc_vmalloc_init+0x0/0x2a returned 0 after 0 usecs
calling init_emergency_pool+0x0/0x62 @ 1
highmem bounce pool size: 64 pages
initcall init_emergency_pool+0x0/0x62 returned 0 after 0 usecs
calling hugetlb_init+0x0/0x2fa @ 1
HugeTLB registered 4 MB page size, pre-allocated 0 pages
initcall hugetlb_init+0x0/0x2fa returned 0 after 3906 usecs
calling ksm_init+0x0/0x1c1 @ 1
initcall ksm_init+0x0/0x1c1 returned 0 after 0 usecs
calling slab_proc_init+0x0/0x2a @ 1
initcall slab_proc_init+0x0/0x2a returned 0 after 0 usecs
calling slab_sysfs_init+0x0/0xc8 @ 1
initcall slab_sysfs_init+0x0/0xc8 returned 0 after 7812 usecs
calling fasync_init+0x0/0x2f @ 1
initcall fasync_init+0x0/0x2f returned 0 after 0 usecs
calling proc_filesystems_init+0x0/0x27 @ 1
initcall proc_filesystems_init+0x0/0x27 returned 0 after 0 usecs
calling dnotify_init+0x0/0x81 @ 1
initcall dnotify_init+0x0/0x81 returned 0 after 0 usecs
calling inotify_user_setup+0x0/0x78 @ 1
initcall inotify_user_setup+0x0/0x78 returned 0 after 0 usecs
calling aio_setup+0x0/0xdd @ 1
initcall aio_setup+0x0/0xdd returned 0 after 0 usecs
calling proc_locks_init+0x0/0x27 @ 1
initcall proc_locks_init+0x0/0x27 returned 0 after 0 usecs
calling init_mbcache+0x0/0x11 @ 1
initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
calling proc_cmdline_init+0x0/0x27 @ 1
initcall proc_cmdline_init+0x0/0x27 returned 0 after 0 usecs
calling proc_cpuinfo_init+0x0/0x27 @ 1
initcall proc_cpuinfo_init+0x0/0x27 returned 0 after 0 usecs
calling proc_devices_init+0x0/0x27 @ 1
initcall proc_devices_init+0x0/0x27 returned 0 after 0 usecs
calling proc_interrupts_init+0x0/0x27 @ 1
initcall proc_interrupts_init+0x0/0x27 returned 0 after 0 usecs
calling proc_loadavg_init+0x0/0x27 @ 1
initcall proc_loadavg_init+0x0/0x27 returned 0 after 0 usecs
calling proc_meminfo_init+0x0/0x27 @ 1
initcall proc_meminfo_init+0x0/0x27 returned 0 after 0 usecs
calling proc_stat_init+0x0/0x27 @ 1
initcall proc_stat_init+0x0/0x27 returned 0 after 0 usecs
calling proc_uptime_init+0x0/0x27 @ 1
initcall proc_uptime_init+0x0/0x27 returned 0 after 0 usecs
calling proc_version_init+0x0/0x27 @ 1
initcall proc_version_init+0x0/0x27 returned 0 after 0 usecs
calling proc_softirqs_init+0x0/0x27 @ 1
initcall proc_softirqs_init+0x0/0x27 returned 0 after 0 usecs
calling proc_kmsg_init+0x0/0x2a @ 1
initcall proc_kmsg_init+0x0/0x2a returned 0 after 0 usecs
calling proc_page_init+0x0/0x4a @ 1
initcall proc_page_init+0x0/0x4a returned 0 after 0 usecs
calling configfs_init+0x0/0xc8 @ 1
initcall configfs_init+0x0/0xc8 returned 0 after 0 usecs
calling init_devpts_fs+0x0/0x3d @ 1
initcall init_devpts_fs+0x0/0x3d returned 0 after 0 usecs
calling init_dlm+0x0/0x98 @ 1
DLM (built Jun 30 2010 02:07:29) installed
initcall init_dlm+0x0/0x98 returned 0 after 3906 usecs
calling init_reiserfs_fs+0x0/0x64 @ 1
initcall init_reiserfs_fs+0x0/0x64 returned 0 after 0 usecs
calling init_ext3_fs+0x0/0x6a @ 1
initcall init_ext3_fs+0x0/0x6a returned 0 after 0 usecs
calling init_ext2_fs+0x0/0x6a @ 1
initcall init_ext2_fs+0x0/0x6a returned 0 after 0 usecs
calling init_ext4_fs+0x0/0xd4 @ 1
initcall init_ext4_fs+0x0/0xd4 returned 0 after 0 usecs
calling journal_init+0x0/0xa3 @ 1
initcall journal_init+0x0/0xa3 returned 0 after 0 usecs
calling journal_init+0x0/0xe8 @ 1
initcall journal_init+0x0/0xe8 returned 0 after 0 usecs
calling init_ramfs_fs+0x0/0xf @ 1
initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
calling init_hugetlbfs_fs+0x0/0x8b @ 1
initcall init_hugetlbfs_fs+0x0/0x8b returned 0 after 0 usecs
calling init_fat_fs+0x0/0x4c @ 1
initcall init_fat_fs+0x0/0x4c returned 0 after 0 usecs
calling init_vfat_fs+0x0/0xf @ 1
initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs
calling init_iso9660_fs+0x0/0x6a @ 1
initcall init_iso9660_fs+0x0/0x6a returned 0 after 0 usecs
calling init_nfs_fs+0x0/0x158 @ 1
FS-Cache: Netfs 'nfs' registered for caching
initcall init_nfs_fs+0x0/0x158 returned 0 after 3906 usecs
calling init_nlm+0x0/0x1c @ 1
initcall init_nlm+0x0/0x1c returned 0 after 0 usecs
calling init_nls_cp437+0x0/0xf @ 1
initcall init_nls_cp437+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp737+0x0/0xf @ 1
initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp775+0x0/0xf @ 1
initcall init_nls_cp775+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp850+0x0/0xf @ 1
initcall init_nls_cp850+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp852+0x0/0xf @ 1
initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp857+0x0/0xf @ 1
initcall init_nls_cp857+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp861+0x0/0xf @ 1
initcall init_nls_cp861+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp862+0x0/0xf @ 1
initcall init_nls_cp862+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp863+0x0/0xf @ 1
initcall init_nls_cp863+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp864+0x0/0xf @ 1
initcall init_nls_cp864+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp866+0x0/0xf @ 1
initcall init_nls_cp866+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp869+0x0/0xf @ 1
initcall init_nls_cp869+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp932+0x0/0xf @ 1
initcall init_nls_cp932+0x0/0xf returned 0 after 0 usecs
calling init_nls_euc_jp+0x0/0x39 @ 1
initcall init_nls_euc_jp+0x0/0x39 returned 0 after 0 usecs
calling init_nls_cp936+0x0/0xf @ 1
initcall init_nls_cp936+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp949+0x0/0xf @ 1
initcall init_nls_cp949+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp1250+0x0/0xf @ 1
initcall init_nls_cp1250+0x0/0xf returned 0 after 0 usecs
calling init_nls_ascii+0x0/0xf @ 1
initcall init_nls_ascii+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_1+0x0/0xf @ 1
initcall init_nls_iso8859_1+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_3+0x0/0xf @ 1
initcall init_nls_iso8859_3+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_6+0x0/0xf @ 1
initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_7+0x0/0xf @ 1
initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp1255+0x0/0xf @ 1
initcall init_nls_cp1255+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_13+0x0/0xf @ 1
initcall init_nls_iso8859_13+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_14+0x0/0xf @ 1
initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 usecs
calling init_nls_koi8_u+0x0/0xf @ 1
initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 usecs
calling init_nls_koi8_ru+0x0/0x39 @ 1
initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 usecs
calling init_nls_utf8+0x0/0x1f @ 1
initcall init_nls_utf8+0x0/0x1f returned 0 after 0 usecs
calling init_cifs+0x0/0x3e5 @ 1
initcall init_cifs+0x0/0x3e5 returned 0 after 3906 usecs
calling init_ncp_fs+0x0/0x5a @ 1
initcall init_ncp_fs+0x0/0x5a returned 0 after 0 usecs
calling init_ntfs_fs+0x0/0x235 @ 1
NTFS driver 2.1.29 [Flags: R/W DEBUG].
initcall init_ntfs_fs+0x0/0x235 returned 0 after 3906 usecs
calling init_autofs_fs+0x0/0xf @ 1
initcall init_autofs_fs+0x0/0xf returned 0 after 0 usecs
calling init_autofs4_fs+0x0/0x1e @ 1
initcall init_autofs4_fs+0x0/0x1e returned -16 after 0 usecs
initcall init_autofs4_fs+0x0/0x1e returned with error code -16
calling fuse_init+0x0/0x123 @ 1
fuse init (API version 7.14)
initcall fuse_init+0x0/0x123 returned 0 after 3906 usecs
calling init_jfs_fs+0x0/0x18e @ 1
JFS: nTxBlock = 7942, nTxLock = 63536
initcall init_jfs_fs+0x0/0x18e returned 0 after 7812 usecs
calling init_nilfs_fs+0x0/0xe1 @ 1
NILFS version 2 loaded
initcall init_nilfs_fs+0x0/0xe1 returned 0 after 3906 usecs
calling init_ceph+0x0/0x176 @ 1
ceph: loaded (mon/mds/osd proto 15/32/24, osdmap 5/5 5/5)
initcall init_ceph+0x0/0x176 returned 0 after 3906 usecs
calling ipc_init+0x0/0x20 @ 1
msgmni has been set to 1713
initcall ipc_init+0x0/0x20 returned 0 after 3906 usecs
calling ipc_sysctl_init+0x0/0x11 @ 1
initcall ipc_sysctl_init+0x0/0x11 returned 0 after 0 usecs
calling init_mqueue_fs+0x0/0x95 @ 1
initcall init_mqueue_fs+0x0/0x95 returned 0 after 0 usecs
calling key_proc_init+0x0/0x64 @ 1
initcall key_proc_init+0x0/0x64 returned 0 after 0 usecs
calling selinux_nf_ip_init+0x0/0x65 @ 1
SELinux: Registering netfilter hooks
initcall selinux_nf_ip_init+0x0/0x65 returned 0 after 3906 usecs
calling init_sel_fs+0x0/0x5c @ 1
initcall init_sel_fs+0x0/0x5c returned 0 after 0 usecs
calling selnl_init+0x0/0x59 @ 1
initcall selnl_init+0x0/0x59 returned 0 after 0 usecs
calling sel_netif_init+0x0/0x6d @ 1
initcall sel_netif_init+0x0/0x6d returned 0 after 0 usecs
calling sel_netnode_init+0x0/0x76 @ 1
initcall sel_netnode_init+0x0/0x76 returned 0 after 0 usecs
calling sel_netport_init+0x0/0x76 @ 1
initcall sel_netport_init+0x0/0x76 returned 0 after 0 usecs
calling aurule_init+0x0/0x46 @ 1
initcall aurule_init+0x0/0x46 returned 0 after 0 usecs
calling crypto_wq_init+0x0/0x3a @ 1
initcall crypto_wq_init+0x0/0x3a returned 0 after 0 usecs
calling crypto_algapi_init+0x0/0xc @ 1
initcall crypto_algapi_init+0x0/0xc returned 0 after 0 usecs
calling skcipher_module_init+0x0/0x11 @ 1
initcall skcipher_module_init+0x0/0x11 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0xf @ 1
initcall chainiv_module_init+0x0/0xf returned 0 after 0 usecs
calling eseqiv_module_init+0x0/0xf @ 1
initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
calling seqiv_module_init+0x0/0xf @ 1
initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs
calling hmac_module_init+0x0/0xf @ 1
initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
calling vmac_module_init+0x0/0xf @ 1
initcall vmac_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_xcbc_module_init+0x0/0xf @ 1
initcall crypto_xcbc_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_null_mod_init+0x0/0x69 @ 1
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
initcall crypto_null_mod_init+0x0/0x69 returned 0 after 15625 usecs
calling md4_mod_init+0x0/0xf @ 1
initcall md4_mod_init+0x0/0xf returned 0 after 0 usecs
calling md5_mod_init+0x0/0xf @ 1
initcall md5_mod_init+0x0/0xf returned 0 after 0 usecs
calling rmd128_mod_init+0x0/0xf @ 1
initcall rmd128_mod_init+0x0/0xf returned 0 after 0 usecs
calling rmd160_mod_init+0x0/0xf @ 1
initcall rmd160_mod_init+0x0/0xf returned 0 after 0 usecs
calling rmd256_mod_init+0x0/0xf @ 1
initcall rmd256_mod_init+0x0/0xf returned 0 after 0 usecs
calling rmd320_mod_init+0x0/0xf @ 1
initcall rmd320_mod_init+0x0/0xf returned 0 after 3906 usecs
calling sha1_generic_mod_init+0x0/0xf @ 1
initcall sha1_generic_mod_init+0x0/0xf returned 0 after 0 usecs
calling sha512_generic_mod_init+0x0/0x33 @ 1
initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
calling wp512_mod_init+0x0/0x59 @ 1
initcall wp512_mod_init+0x0/0x59 returned 0 after 0 usecs
calling tgr192_mod_init+0x0/0x59 @ 1
initcall tgr192_mod_init+0x0/0x59 returned 0 after 0 usecs
calling crypto_ecb_module_init+0x0/0xf @ 1
initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_cbc_module_init+0x0/0xf @ 1
initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_pcbc_module_init+0x0/0xf @ 1
initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_cts_module_init+0x0/0xf @ 1
initcall crypto_cts_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_module_init+0x0/0xf @ 1
initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_ctr_module_init+0x0/0x35 @ 1
initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs
calling crypto_gcm_module_init+0x0/0x89 @ 1
initcall crypto_gcm_module_init+0x0/0x89 returned 0 after 0 usecs
calling crypto_ccm_module_init+0x0/0x4f @ 1
initcall crypto_ccm_module_init+0x0/0x4f returned 0 after 0 usecs
calling des_generic_mod_init+0x0/0x33 @ 1
initcall des_generic_mod_init+0x0/0x33 returned 0 after 0 usecs
calling fcrypt_mod_init+0x0/0xf @ 1
alg: No test for fcrypt (fcrypt-generic)
initcall fcrypt_mod_init+0x0/0xf returned 0 after 3906 usecs
calling blowfish_mod_init+0x0/0xf @ 1
initcall blowfish_mod_init+0x0/0xf returned 0 after 0 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 0 usecs
calling camellia_init+0x0/0xf @ 1
initcall camellia_init+0x0/0xf returned 0 after 0 usecs
calling cast5_mod_init+0x0/0xf @ 1
initcall cast5_mod_init+0x0/0xf returned 0 after 0 usecs
calling cast6_mod_init+0x0/0xf @ 1
initcall cast6_mod_init+0x0/0xf returned 0 after 0 usecs
calling arc4_init+0x0/0xf @ 1
initcall arc4_init+0x0/0xf returned 0 after 0 usecs
calling tea_mod_init+0x0/0x59 @ 1
initcall tea_mod_init+0x0/0x59 returned 0 after 0 usecs
calling khazad_mod_init+0x0/0xf @ 1
initcall khazad_mod_init+0x0/0xf returned 0 after 0 usecs
calling anubis_mod_init+0x0/0xf @ 1
initcall anubis_mod_init+0x0/0xf returned 0 after 0 usecs
calling salsa20_generic_mod_init+0x0/0xf @ 1
initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 0 usecs
calling deflate_mod_init+0x0/0xf @ 1
initcall deflate_mod_init+0x0/0xf returned 0 after 0 usecs
calling zlib_mod_init+0x0/0xf @ 1
initcall zlib_mod_init+0x0/0xf returned 0 after 0 usecs
calling michael_mic_init+0x0/0xf @ 1
initcall michael_mic_init+0x0/0xf returned 0 after 0 usecs
calling crc32c_mod_init+0x0/0xf @ 1
initcall crc32c_mod_init+0x0/0xf returned 0 after 0 usecs
calling crypto_authenc_module_init+0x0/0xf @ 1
initcall crypto_authenc_module_init+0x0/0xf returned 0 after 0 usecs
calling krng_mod_init+0x0/0xf @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0xf returned 0 after 3906 usecs
calling prng_mod_init+0x0/0x1d @ 1
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
initcall prng_mod_init+0x0/0x1d returned 0 after 11718 usecs
calling ghash_mod_init+0x0/0xf @ 1
initcall ghash_mod_init+0x0/0xf returned 0 after 0 usecs
calling proc_genhd_init+0x0/0x44 @ 1
initcall proc_genhd_init+0x0/0x44 returned 0 after 0 usecs
calling bsg_init+0x0/0x117 @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
initcall bsg_init+0x0/0x117 returned 0 after 3906 usecs
calling init_cgroup_blkio+0x0/0xf @ 1
initcall init_cgroup_blkio+0x0/0xf returned 0 after 0 usecs
calling noop_init+0x0/0x11 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x11 returned 0 after 3906 usecs
calling deadline_init+0x0/0x11 @ 1
io scheduler deadline registered (default)
initcall deadline_init+0x0/0x11 returned 0 after 3906 usecs
calling cfq_init+0x0/0xa8 @ 1
io scheduler cfq registered
initcall cfq_init+0x0/0xa8 returned 0 after 0 usecs
calling libcrc32c_mod_init+0x0/0x29 @ 1
initcall libcrc32c_mod_init+0x0/0x29 returned 0 after 0 usecs
calling init_kmp+0x0/0xf @ 1
initcall init_kmp+0x0/0xf returned 0 after 0 usecs
calling init_bm+0x0/0xf @ 1
initcall init_bm+0x0/0xf returned 0 after 0 usecs
calling init_fsm+0x0/0xf @ 1
initcall init_fsm+0x0/0xf returned 0 after 0 usecs
calling audit_classes_init+0x0/0x4f @ 1
initcall audit_classes_init+0x0/0x4f returned 0 after 0 usecs
calling dynamic_debug_init+0x0/0x105 @ 1
initcall dynamic_debug_init+0x0/0x105 returned 0 after 0 usecs
calling adp5588_gpio_init+0x0/0x11 @ 1
i2c-core: driver [adp5588-gpio] registered
initcall adp5588_gpio_init+0x0/0x11 returned 0 after 3906 usecs
calling lnw_gpio_init+0x0/0x16 @ 1
initcall lnw_gpio_init+0x0/0x16 returned 0 after 0 usecs
calling it8761e_gpio_init+0x0/0x15f @ 1
initcall it8761e_gpio_init+0x0/0x15f returned -19 after 0 usecs
calling sch_gpio_init+0x0/0xf @ 1
initcall sch_gpio_init+0x0/0xf returned 0 after 0 usecs
calling rdc321x_gpio_init+0x0/0xf @ 1
initcall rdc321x_gpio_init+0x0/0xf returned 0 after 0 usecs
calling pci_proc_init+0x0/0x64 @ 1
initcall pci_proc_init+0x0/0x64 returned 0 after 0 usecs
calling pcie_portdrv_init+0x0/0x51 @ 1
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0e.0: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x51 returned 0 after 15625 usecs
calling pci_hotplug_init+0x0/0x1e @ 1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
initcall pci_hotplug_init+0x0/0x1e returned 0 after 3906 usecs
calling cpqhpc_init+0x0/0x66 @ 1
cpqphp: Compaq Hot Plug PCI Controller Driver version: 0.9.8
initcall cpqhpc_init+0x0/0x66 returned 0 after 3906 usecs
calling pcied_init+0x0/0x71 @ 1
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
initcall pcied_init+0x0/0x71 returned 0 after 3906 usecs
calling shpcd_init+0x0/0x5f @ 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
initcall shpcd_init+0x0/0x5f returned 0 after 3906 usecs
calling init_legacy+0x0/0x36 @ 1
initcall init_legacy+0x0/0x36 returned 0 after 0 usecs
calling fb_console_init+0x0/0x117 @ 1
initcall fb_console_init+0x0/0x117 returned 0 after 0 usecs
calling genericbl_init+0x0/0xf @ 1
initcall genericbl_init+0x0/0xf returned 0 after 0 usecs
calling progearbl_init+0x0/0x4f @ 1
ALI M7101 PMU not found.
initcall progearbl_init+0x0/0x4f returned 0 after 0 usecs
calling kb3886_init+0x0/0x33 @ 1
initcall kb3886_init+0x0/0x33 returned -19 after 0 usecs
calling adp8860_init+0x0/0x11 @ 1
i2c-core: driver [adp8860_bl] registered
initcall adp8860_init+0x0/0x11 returned 0 after 3906 usecs
calling display_class_init+0x0/0x6d @ 1
initcall display_class_init+0x0/0x6d returned 0 after 0 usecs
calling arcfb_init+0x0/0x60 @ 1
initcall arcfb_init+0x0/0x60 returned -6 after 0 usecs
initcall arcfb_init+0x0/0x60 returned with error code -6
calling cyber2000fb_init+0x0/0xb3 @ 1
initcall cyber2000fb_init+0x0/0xb3 returned 0 after 0 usecs
calling pm2fb_init+0x0/0x12b @ 1
initcall pm2fb_init+0x0/0x12b returned 0 after 0 usecs
calling matroxfb_init+0x0/0x8a2 @ 1
initcall matroxfb_init+0x0/0x8a2 returned 0 after 0 usecs
calling matroxfb_crtc2_init+0x0/0x30 @ 1
initcall matroxfb_crtc2_init+0x0/0x30 returned 0 after 0 usecs
calling i2c_matroxfb_init+0x0/0x2b @ 1
initcall i2c_matroxfb_init+0x0/0x2b returned 0 after 0 usecs
calling rivafb_init+0x0/0x1af @ 1
rivafb_setup START
initcall rivafb_init+0x0/0x1af returned 0 after 0 usecs
calling aty128fb_init+0x0/0x118 @ 1
initcall aty128fb_init+0x0/0x118 returned 0 after 0 usecs
calling via_core_init+0x0/0x29 @ 1
VIA Graphics Intergration Chipset framebuffer 2.4 initializing
initcall via_core_init+0x0/0x29 returned 0 after 3906 usecs
calling kyrofb_init+0x0/0xc9 @ 1
initcall kyrofb_init+0x0/0xc9 returned 0 after 0 usecs
calling savagefb_init+0x0/0x60 @ 1
initcall savagefb_init+0x0/0x60 returned 0 after 0 usecs
calling neofb_init+0x0/0x12e @ 1
initcall neofb_init+0x0/0x12e returned 0 after 0 usecs
calling tdfxfb_init+0x0/0x107 @ 1
initcall tdfxfb_init+0x0/0x107 returned 0 after 0 usecs
calling imsttfb_init+0x0/0xd7 @ 1
initcall imsttfb_init+0x0/0xd7 returned 0 after 0 usecs
calling vt8623fb_init+0x0/0x76 @ 1
initcall vt8623fb_init+0x0/0x76 returned 0 after 0 usecs
calling tridentfb_init+0x0/0x1da @ 1
initcall tridentfb_init+0x0/0x1da returned 0 after 0 usecs
calling vmlfb_init+0x0/0x80 @ 1
vmlfb: initializing
initcall vmlfb_init+0x0/0x80 returned 0 after 3906 usecs
calling cr_pll_init+0x0/0xd1 @ 1
Could not find Carillo Ranch MCH device.
initcall cr_pll_init+0x0/0xd1 returned -19 after 3906 usecs
calling s3fb_init+0x0/0xf2 @ 1
initcall s3fb_init+0x0/0xf2 returned 0 after 0 usecs
calling arkfb_init+0x0/0x75 @ 1
initcall arkfb_init+0x0/0x75 returned 0 after 0 usecs
calling hecubafb_init+0x0/0xf @ 1
initcall hecubafb_init+0x0/0xf returned 0 after 0 usecs
calling n411_init+0x0/0x7f @ 1
no IO addresses supplied
initcall n411_init+0x0/0x7f returned -22 after 0 usecs
initcall n411_init+0x0/0x7f returned with error code -22
calling hgafb_init+0x0/0x63 @ 1
hgafb: HGA card not detected.
hgafb: probe of hgafb.0 failed with error -22
initcall hgafb_init+0x0/0x63 returned 0 after 7812 usecs
calling sstfb_init+0x0/0x18f @ 1
initcall sstfb_init+0x0/0x18f returned 0 after 0 usecs
calling tmiofb_init+0x0/0x57 @ 1
initcall tmiofb_init+0x0/0x57 returned 0 after 0 usecs
calling metronomefb_init+0x0/0xf @ 1
initcall metronomefb_init+0x0/0xf returned 0 after 0 usecs
calling broadsheetfb_init+0x0/0xf @ 1
initcall broadsheetfb_init+0x0/0xf returned 0 after 0 usecs
calling carminefb_init+0x0/0x35 @ 1
initcall carminefb_init+0x0/0x35 returned 0 after 0 usecs
calling mb862xxfb_init+0x0/0x1b @ 1
initcall mb862xxfb_init+0x0/0x1b returned 0 after 0 usecs
calling uvesafb_init+0x0/0x35d @ 1
uvesafb: failed to execute /sbin/v86d
uvesafb: make sure that the v86d helper is installed and executable
uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
uvesafb: vbe_init() failed with -22
uvesafb: probe of uvesafb.0 failed with error -22
initcall uvesafb_init+0x0/0x35d returned 0 after 15625 usecs
calling virtio_pci_init+0x0/0x44 @ 1
initcall virtio_pci_init+0x0/0x44 returned 0 after 0 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 0 usecs
calling rand_initialize+0x0/0x30 @ 1
initcall rand_initialize+0x0/0x30 returned 0 after 0 usecs
calling tty_init+0x0/0x104 @ 1
initcall tty_init+0x0/0x104 returned 0 after 0 usecs
calling pty_init+0x0/0x2bd @ 1
initcall pty_init+0x0/0x2bd returned 0 after 0 usecs
calling sysrq_init+0x0/0x7a @ 1
initcall sysrq_init+0x0/0x7a returned 0 after 0 usecs
calling rp_init+0x0/0xff3 @ 1
RocketPort device driver module, version 2.09, 12-June-2003
No rocketport ports found; unloading driver
initcall rp_init+0x0/0xff3 returned -6 after 7812 usecs
initcall rp_init+0x0/0xff3 returned with error code -6
calling stallion_module_init+0x0/0x3de @ 1
Stallion Multiport Serial Driver: version 5.6.0
initcall stallion_module_init+0x0/0x3de returned 0 after 3906 usecs
calling specialix_init_module+0x0/0x354 @ 1
sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998.
sx: derived from work (c) D.Gorodchanin 1994-1996.
sx: DTR/RTS pin is always RTS.
sx0: specialix IO8+ Board at 0x100 not found.
sx1: specialix IO8+ Board at 0x180 not found.
sx2: specialix IO8+ Board at 0x250 not found.
sx3: specialix IO8+ Board at 0x260 not found.
sx: No specialix IO8+ boards detected.
initcall specialix_init_module+0x0/0x354 returned -5 after 35156 usecs
initcall specialix_init_module+0x0/0x354 returned with error code -5
calling moxa_init+0x0/0x21c @ 1
MOXA Intellio family driver version 6.0k
initcall moxa_init+0x0/0x21c returned 0 after 11718 usecs
calling mxser_module_init+0x0/0x5a7 @ 1
MOXA Smartio/Industio family driver version 2.0.5
initcall mxser_module_init+0x0/0x5a7 returned 0 after 3906 usecs
calling ip2_loadmain+0x0/0x1292 @ 1
Computone IntelliPort Plus multiport driver version 1.2.14
initcall ip2_loadmain+0x0/0x1292 returned 0 after 3906 usecs
calling synclink_init+0x0/0x22d @ 1
SyncLink serial driver $Revision: 4.38 $
SyncLink serial driver $Revision: 4.38 $, tty major#253
initcall synclink_init+0x0/0x22d returned 0 after 15625 usecs
calling n_hdlc_init+0x0/0x8f @ 1
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
initcall n_hdlc_init+0x0/0x8f returned 0 after 7812 usecs
calling gsm_init+0x0/0x117 @ 1
gsm_init: loaded as 252,0.
initcall gsm_init+0x0/0x117 returned 0 after 3906 usecs
calling init+0x0/0x88 @ 1
initcall init+0x0/0x88 returned 0 after 3906 usecs
calling raw_init+0x0/0xdd @ 1
initcall raw_init+0x0/0xdd returned 0 after 0 usecs
calling lp_init_module+0x0/0x218 @ 1
lp: driver loaded but no devices found
initcall lp_init_module+0x0/0x218 returned 0 after 3906 usecs
calling dtlk_init+0x0/0x1e2 @ 1
DoubleTalk PC - not found
initcall dtlk_init+0x0/0x1e2 returned -19 after 3906 usecs
calling r3964_init+0x0/0x3f @ 1
r3964: Philips r3964 Driver $Revision: 1.10 $
initcall r3964_init+0x0/0x3f returned 0 after 3906 usecs
calling applicom_init+0x0/0x46c @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x46c returned -6 after 7812 usecs
initcall applicom_init+0x0/0x46c returned with error code -6
calling sonypi_init+0x0/0x7f @ 1
sonypi: Sony Programmable I/O Controller Driver v1.26.
initcall sonypi_init+0x0/0x7f returned -19 after 3906 usecs
calling rtc_init+0x0/0xff @ 1
Real Time Clock Driver v1.12b
initcall rtc_init+0x0/0xff returned 0 after 3906 usecs
calling nvram_init+0x0/0x7e @ 1
Non-volatile memory driver v1.3
initcall nvram_init+0x0/0x7e returned 0 after 3906 usecs
calling mod_init+0x0/0x207 @ 1
initcall mod_init+0x0/0x207 returned -19 after 0 usecs
calling mod_init+0x0/0x97 @ 1
initcall mod_init+0x0/0x97 returned -19 after 0 usecs
calling mod_init+0x0/0x48 @ 1
initcall mod_init+0x0/0x48 returned -19 after 0 usecs
calling ppdev_init+0x0/0xbc @ 1
ppdev: user-space parallel port driver
initcall ppdev_init+0x0/0xbc returned 0 after 0 usecs
calling nsc_gpio_init+0x0/0x16 @ 1
nsc_gpio initializing
initcall nsc_gpio_init+0x0/0x16 returned 0 after 3906 usecs
calling agp_init+0x0/0x2f @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x2f returned 0 after 3906 usecs
calling agp_ali_init+0x0/0x24 @ 1
initcall agp_ali_init+0x0/0x24 returned 0 after 0 usecs
calling agp_ati_init+0x0/0x24 @ 1
initcall agp_ati_init+0x0/0x24 returned 0 after 0 usecs
calling agp_amd64_mod_init+0x0/0xa @ 1
initcall agp_amd64_mod_init+0x0/0xa returned -19 after 0 usecs
calling agp_efficeon_init+0x0/0x39 @ 1
initcall agp_efficeon_init+0x0/0x39 returned 0 after 0 usecs
calling agp_intel_init+0x0/0x24 @ 1
initcall agp_intel_init+0x0/0x24 returned 0 after 0 usecs
calling agp_nvidia_init+0x0/0x24 @ 1
initcall agp_nvidia_init+0x0/0x24 returned 0 after 0 usecs
calling agp_sis_init+0x0/0x24 @ 1
initcall agp_sis_init+0x0/0x24 returned 0 after 0 usecs
calling agp_serverworks_init+0x0/0x24 @ 1
initcall agp_serverworks_init+0x0/0x24 returned 0 after 0 usecs
calling ipmi_init_msghandler_mod+0x0/0xc @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 3906 usecs
calling init_ipmi_devintf+0x0/0xf3 @ 1
ipmi device interface
initcall init_ipmi_devintf+0x0/0xf3 returned 0 after 0 usecs
calling init_tis+0x0/0x7ec @ 1
tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
tpm_tis tpm_tis: Unable to request irq: 255 for use
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
initcall init_tis+0x0/0x7ec returned 0 after 19531 usecs
calling drm_core_init+0x0/0x12b @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x12b returned 0 after 0 usecs
calling ttm_init+0x0/0x6e @ 1
initcall ttm_init+0x0/0x6e returned 0 after 0 usecs
calling tdfx_init+0x0/0xf @ 1
initcall tdfx_init+0x0/0xf returned 0 after 0 usecs
calling r128_init+0x0/0x19 @ 1
initcall r128_init+0x0/0x19 returned 0 after 0 usecs
calling radeon_init+0x0/0xb4 @ 1
[drm] radeon defaulting to userspace modesetting.
IOAPIC[0]: Set routing entry (2-5 -> 0x41 -> IRQ 29 Mode:1 Active:1)
pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 29
pci 0000:01:00.0: setting latency timer to 64
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
initcall radeon_init+0x0/0xb4 returned 0 after 19531 usecs
calling mga_init+0x0/0x19 @ 1
initcall mga_init+0x0/0x19 returned 0 after 0 usecs
calling i810_init+0x0/0x19 @ 1
initcall i810_init+0x0/0x19 returned 0 after 0 usecs
calling sis_init+0x0/0x19 @ 1
initcall sis_init+0x0/0x19 returned 0 after 0 usecs
calling savage_init+0x0/0x19 @ 1
initcall savage_init+0x0/0x19 returned 0 after 0 usecs
calling i810fb_init+0x0/0x35d @ 1
initcall i810fb_init+0x0/0x35d returned 0 after 0 usecs
calling serial8250_init+0x0/0x14f @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall serial8250_init+0x0/0x14f returned 0 after 265625 usecs
calling serial8250_pci_init+0x0/0x16 @ 1
initcall serial8250_pci_init+0x0/0x16 returned 0 after 0 usecs
calling fourport_init+0x0/0xf @ 1
initcall fourport_init+0x0/0xf returned 0 after 3906 usecs
calling boca_init+0x0/0xf @ 1
initcall boca_init+0x0/0xf returned 0 after 0 usecs
calling hub6_init+0x0/0xf @ 1
initcall hub6_init+0x0/0xf returned 0 after 3906 usecs
calling mca_init+0x0/0x1d @ 1
initcall mca_init+0x0/0x1d returned -19 after 0 usecs
calling max3100_init+0x0/0xf @ 1
initcall max3100_init+0x0/0xf returned 0 after 0 usecs
calling jsm_init_module+0x0/0x3a @ 1
initcall jsm_init_module+0x0/0x3a returned 0 after 0 usecs
calling altera_jtaguart_init+0x0/0x33 @ 1
initcall altera_jtaguart_init+0x0/0x33 returned 0 after 0 usecs
calling parport_default_proc_register+0x0/0x16 @ 1
initcall parport_default_proc_register+0x0/0x16 returned 0 after 0 usecs
calling parport_pc_init+0x0/0x19b @ 1
parport0: PC-style at 0x378 (0x778)async_waiting @ 1
async_continuing @ 1 after 0 usec
[PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
initcall parport_pc_init+0x0/0x19b returned 0 after 140625 usecs
calling parport_serial_init+0x0/0x16 @ 1
initcall parport_serial_init+0x0/0x16 returned 0 after 0 usecs
calling parport_ax88796_init+0x0/0xf @ 1
initcall parport_ax88796_init+0x0/0xf returned 0 after 0 usecs
calling isa_bus_init+0x0/0x33 @ 1
initcall isa_bus_init+0x0/0x33 returned 0 after 0 usecs
calling brd_init+0x0/0x160 @ 1
brd: module loaded
initcall brd_init+0x0/0x160 returned 0 after 3906 usecs
calling cpqarray_init+0x0/0x277 @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x277 returned -19 after 0 usecs
calling cciss_init+0x0/0x8e @ 1
HP CISS Driver (v 3.6.20)
initcall cciss_init+0x0/0x8e returned 0 after 3906 usecs
calling pkt_init+0x0/0x1c2 @ 1
initcall pkt_init+0x0/0x1c2 returned 0 after 0 usecs
calling osdblk_init+0x0/0x9e @ 1
initcall osdblk_init+0x0/0x9e returned 0 after 0 usecs
calling nbd_init+0x0/0x24c @ 1
nbd: registered device at major 43
initcall nbd_init+0x0/0x24c returned 0 after 7812 usecs
calling ub_init+0x0/0x50 @ 1
usbcore: registered new interface driver ub
initcall ub_init+0x0/0x50 returned 0 after 3906 usecs
calling drbd_init+0x0/0x31f @ 1
drbd: initialized. Version: 8.3.8rc2 (api:88/proto:86-94)
drbd: built-in
drbd: registered as block device major 147
drbd: minor_table @ 0xf664c6e0
initcall drbd_init+0x0/0x31f returned 0 after 15625 usecs
calling ibmasm_init+0x0/0x66 @ 1
ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
initcall ibmasm_init+0x0/0x66 returned 0 after 3906 usecs
calling ad_dpot_i2c_init+0x0/0x11 @ 1
i2c-core: driver [ad_dpot] registered
initcall ad_dpot_i2c_init+0x0/0x11 returned 0 after 3906 usecs
calling ad_dpot_spi_init+0x0/0xf @ 1
initcall ad_dpot_spi_init+0x0/0xf returned 0 after 0 usecs
calling ioc4_init+0x0/0x16 @ 1
initcall ioc4_init+0x0/0x16 returned 0 after 0 usecs
calling enclosure_init+0x0/0x14 @ 1
initcall enclosure_init+0x0/0x14 returned 0 after 0 usecs
calling cs5535_mfgpt_init+0x0/0x1d4 @ 1
initcall cs5535_mfgpt_init+0x0/0x1d4 returned -19 after 0 usecs
calling ilo_init+0x0/0x82 @ 1
initcall ilo_init+0x0/0x82 returned 0 after 0 usecs
calling tsl2550_init+0x0/0x11 @ 1
i2c-core: driver [tsl2550] registered
initcall tsl2550_init+0x0/0x11 returned 0 after 3906 usecs
calling dac7512_init+0x0/0xf @ 1
initcall dac7512_init+0x0/0xf returned 0 after 0 usecs
calling c2port_init+0x0/0x4a @ 1
Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
initcall c2port_init+0x0/0x4a returned 0 after 3906 usecs
calling duramar2150_c2port_init+0x0/0x6a @ 1
c2port c2port0: C2 port uc added
c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
initcall duramar2150_c2port_init+0x0/0x6a returned 0 after 3906 usecs
calling iwmct_init+0x0/0x3c @ 1
initcall iwmct_init+0x0/0x3c returned 0 after 0 usecs
calling at24_init+0x0/0x2b @ 1
i2c-core: driver [at24] registered
initcall at24_init+0x0/0x2b returned 0 after 3906 usecs
calling at25_init+0x0/0xf @ 1
initcall at25_init+0x0/0xf returned 0 after 0 usecs
calling eeprom_init+0x0/0x11 @ 1
i2c-core: driver [eeprom] registered
initcall eeprom_init+0x0/0x11 returned 0 after 3906 usecs
calling max6875_init+0x0/0x11 @ 1
i2c-core: driver [max6875] registered
initcall max6875_init+0x0/0x11 returned 0 after 3906 usecs
calling cb710_init_module+0x0/0x16 @ 1
initcall cb710_init_module+0x0/0x16 returned 0 after 0 usecs
calling lpc_sch_init+0x0/0x16 @ 1
initcall lpc_sch_init+0x0/0x16 returned 0 after 0 usecs
calling rdc321x_sb_init+0x0/0x16 @ 1
initcall rdc321x_sb_init+0x0/0x16 returned 0 after 0 usecs
calling mac_hid_init+0x0/0x1c @ 1
initcall mac_hid_init+0x0/0x1c returned 0 after 0 usecs
calling scsi_tgt_init+0x0/0x8d @ 1
initcall scsi_tgt_init+0x0/0x8d returned 0 after 0 usecs
calling raid_init+0x0/0xf @ 1
initcall raid_init+0x0/0xf returned 0 after 0 usecs
calling spi_transport_init+0x0/0x75 @ 1
initcall spi_transport_init+0x0/0x75 returned 0 after 0 usecs
calling fc_transport_init+0x0/0x71 @ 1
initcall fc_transport_init+0x0/0x71 returned 0 after 0 usecs
calling sas_transport_init+0x0/0x9f @ 1
initcall sas_transport_init+0x0/0x9f returned 0 after 0 usecs
calling sas_class_init+0x0/0x35 @ 1
initcall sas_class_init+0x0/0x35 returned 0 after 0 usecs
calling scsi_dh_init+0x0/0x37 @ 1
initcall scsi_dh_init+0x0/0x37 returned 0 after 0 usecs
calling rdac_init+0x0/0x74 @ 1
rdac: device handler registered
initcall rdac_init+0x0/0x74 returned 0 after 3906 usecs
calling hp_sw_init+0x0/0xf @ 1
hp_sw: device handler registered
initcall hp_sw_init+0x0/0xf returned 0 after 3906 usecs
calling clariion_init+0x0/0x32 @ 1
emc: device handler registered
initcall clariion_init+0x0/0x32 returned 0 after 0 usecs
calling alua_init+0x0/0x32 @ 1
alua: device handler registered
initcall alua_init+0x0/0x32 returned 0 after 3906 usecs
calling ahc_linux_init+0x0/0x61 @ 1
initcall ahc_linux_init+0x0/0x61 returned 0 after 0 usecs
calling init_st+0x0/0x175 @ 1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
initcall init_st+0x0/0x175 returned 0 after 3906 usecs
calling init_osst+0x0/0x135 @ 1
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
initcall init_osst+0x0/0x135 returned 0 after 3906 usecs
calling init_sd+0x0/0x12b @ 1
initcall init_sd+0x0/0x12b returned 0 after 0 usecs
calling init_sr+0x0/0x3d @ 1
initcall init_sr+0x0/0x3d returned 0 after 0 usecs
calling init_sg+0x0/0x10f @ 1
initcall init_sg+0x0/0x10f returned 0 after 0 usecs
calling init_ch_module+0x0/0xab @ 1
SCSI Media Changer driver v0.25
initcall init_ch_module+0x0/0xab returned 0 after 0 usecs
calling ses_init+0x0/0x33 @ 1
initcall ses_init+0x0/0x33 returned 0 after 0 usecs
calling osd_uld_init+0x0/0xbf @ 1
osd: LOADED open-osd 0.2.0
initcall osd_uld_init+0x0/0xbf returned 0 after 3906 usecs
calling ahci_init+0x0/0x16 @ 1
initcall ahci_init+0x0/0x16 returned 0 after 0 usecs
calling ahci_init+0x0/0x14 @ 1
initcall ahci_init+0x0/0x14 returned -19 after 0 usecs
calling inic_init+0x0/0x16 @ 1
initcall inic_init+0x0/0x16 returned 0 after 0 usecs
calling sil24_init+0x0/0x16 @ 1
initcall sil24_init+0x0/0x16 returned 0 after 0 usecs
calling qs_ata_init+0x0/0x16 @ 1
initcall qs_ata_init+0x0/0x16 returned 0 after 0 usecs
calling piix_init+0x0/0x24 @ 1
initcall piix_init+0x0/0x24 returned 0 after 0 usecs
calling mv_init+0x0/0x3a @ 1
initcall mv_init+0x0/0x3a returned 0 after 0 usecs
calling nv_init+0x0/0x16 @ 1
initcall nv_init+0x0/0x16 returned 0 after 0 usecs
calling pdc_ata_init+0x0/0x16 @ 1
initcall pdc_ata_init+0x0/0x16 returned 0 after 0 usecs
calling sil_init+0x0/0x16 @ 1
initcall sil_init+0x0/0x16 returned 0 after 0 usecs
calling sis_init+0x0/0x16 @ 1
initcall sis_init+0x0/0x16 returned 0 after 0 usecs
calling k2_sata_init+0x0/0x16 @ 1
initcall k2_sata_init+0x0/0x16 returned 0 after 0 usecs
calling uli_init+0x0/0x16 @ 1
initcall uli_init+0x0/0x16 returned 0 after 0 usecs
calling svia_init+0x0/0x16 @ 1
initcall svia_init+0x0/0x16 returned 0 after 0 usecs
calling vsc_sata_init+0x0/0x16 @ 1
initcall vsc_sata_init+0x0/0x16 returned 0 after 0 usecs
calling amd_init+0x0/0x16 @ 1
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
initcall amd_init+0x0/0x16 returned 0 after 19531 usecs
calling artop_init+0x0/0x16 @ 1
initcall artop_init+0x0/0x16 returned 0 after 0 usecs
calling atp867x_init+0x0/0x16 @ 1
initcall atp867x_init+0x0/0x16 returned 0 after 0 usecs
calling cmd64x_init+0x0/0x16 @ 1
initcall cmd64x_init+0x0/0x16 returned 0 after 0 usecs
calling cs5520_init+0x0/0x16 @ 1
initcall cs5520_init+0x0/0x16 returned 0 after 0 usecs
calling cs5530_init+0x0/0x16 @ 1
initcall cs5530_init+0x0/0x16 returned 0 after 0 usecs
calling cs5535_init+0x0/0x16 @ 1
initcall cs5535_init+0x0/0x16 returned 0 after 0 usecs
calling cs5536_init+0x0/0x16 @ 1
initcall cs5536_init+0x0/0x16 returned 0 after 0 usecs
calling cy82c693_init+0x0/0x16 @ 1
initcall cy82c693_init+0x0/0x16 returned 0 after 0 usecs
calling efar_init+0x0/0x16 @ 1
initcall efar_init+0x0/0x16 returned 0 after 0 usecs
calling hpt36x_init+0x0/0x16 @ 1
initcall hpt36x_init+0x0/0x16 returned 0 after 0 usecs
calling hpt3x2n_init+0x0/0x16 @ 1
initcall hpt3x2n_init+0x0/0x16 returned 0 after 0 usecs
calling hpt3x3_init+0x0/0x16 @ 1
initcall hpt3x3_init+0x0/0x16 returned 0 after 0 usecs
calling it8213_init+0x0/0x16 @ 1
initcall it8213_init+0x0/0x16 returned 0 after 0 usecs
calling it821x_init+0x0/0x16 @ 1
initcall it821x_init+0x0/0x16 returned 0 after 0 usecs
calling netcell_init+0x0/0x16 @ 1
initcall netcell_init+0x0/0x16 returned 0 after 0 usecs
calling ninja32_init+0x0/0x16 @ 1
initcall ninja32_init+0x0/0x16 returned 0 after 0 usecs
calling ns87415_init+0x0/0x16 @ 1
initcall ns87415_init+0x0/0x16 returned 0 after 0 usecs
calling oldpiix_init+0x0/0x16 @ 1
initcall oldpiix_init+0x0/0x16 returned 0 after 0 usecs
calling pdc2027x_init+0x0/0x16 @ 1
initcall pdc2027x_init+0x0/0x16 returned 0 after 0 usecs
calling pdc202xx_init+0x0/0x16 @ 1
initcall pdc202xx_init+0x0/0x16 returned 0 after 0 usecs
calling radisys_init+0x0/0x16 @ 1
initcall radisys_init+0x0/0x16 returned 0 after 0 usecs
calling sch_init+0x0/0x16 @ 1
initcall sch_init+0x0/0x16 returned 0 after 0 usecs
calling sil680_init+0x0/0x16 @ 1
initcall sil680_init+0x0/0x16 returned 0 after 0 usecs
calling sis_init+0x0/0x16 @ 1
initcall sis_init+0x0/0x16 returned 0 after 0 usecs
calling ata_tosh_init+0x0/0x16 @ 1
initcall ata_tosh_init+0x0/0x16 returned 0 after 0 usecs
calling triflex_init+0x0/0x16 @ 1
initcall triflex_init+0x0/0x16 returned 0 after 0 usecs
calling via_init+0x0/0x16 @ 1
initcall via_init+0x0/0x16 returned 0 after 0 usecs
calling cmd640_init+0x0/0x16 @ 1
initcall cmd640_init+0x0/0x16 returned 0 after 0 usecs
calling ns87410_init+0x0/0x16 @ 1
initcall ns87410_init+0x0/0x16 returned 0 after 0 usecs
calling opti_init+0x0/0x16 @ 1
initcall opti_init+0x0/0x16 returned 0 after 0 usecs
calling qdi_init+0x0/0x1ff @ 1
initcall qdi_init+0x0/0x1ff returned -19 after 0 usecs
calling rz1000_init+0x0/0x16 @ 1
initcall rz1000_init+0x0/0x16 returned 0 after 0 usecs
calling winbond_init+0x0/0x2b1 @ 1
initcall winbond_init+0x0/0x2b1 returned -19 after 0 usecs
calling legacy_init+0x0/0x8ac @ 1
initcall legacy_init+0x0/0x8ac returned -19 after 0 usecs
calling butterfly_init+0x0/0xf @ 1
calling 1_async_port_probe+0x0/0xd0 @ 86
calling 2_async_port_probe+0x0/0xd0 @ 87
async_waiting @ 87
parport0: AVR Butterfly
initcall butterfly_init+0x0/0xf returned 0 after 113281 usecs
calling spi_gpio_init+0x0/0x14 @ 1
initcall spi_gpio_init+0x0/0x14 returned -19 after 0 usecs
calling init_spi_lm70llp+0x0/0xf @ 1
parport0: cannot grant exclusive access for device spi-lm70llp
spi-lm70llp: spi_lm70llp probe fail, status -12
initcall init_spi_lm70llp+0x0/0xf returned 0 after 7812 usecs
calling xilinx_spi_pltfm_init+0x0/0xf @ 1
initcall xilinx_spi_pltfm_init+0x0/0xf returned 0 after 0 usecs
calling spidev_init+0x0/0xa5 @ 1
initcall spidev_init+0x0/0xa5 returned 0 after 0 usecs
calling tle62x0_init+0x0/0xf @ 1
initcall tle62x0_init+0x0/0xf returned 0 after 0 usecs
calling marvell_init+0x0/0x49 @ 1
initcall marvell_init+0x0/0x49 returned 0 after 0 usecs
calling lxt_init+0x0/0x4d @ 1
initcall lxt_init+0x0/0x4d returned 0 after 0 usecs
calling qs6612_init+0x0/0xf @ 1
initcall qs6612_init+0x0/0xf returned 0 after 0 usecs
calling smsc_init+0x0/0x81 @ 1
initcall smsc_init+0x0/0x81 returned 0 after 0 usecs
calling broadcom_init+0x0/0x117 @ 1
initcall broadcom_init+0x0/0x117 returned 0 after 0 usecs
calling ip175c_init+0x0/0xf @ 1
initcall ip175c_init+0x0/0xf returned 0 after 0 usecs
calling realtek_init+0x0/0xf @ 1
initcall realtek_init+0x0/0xf returned 0 after 0 usecs
calling et1011c_init+0x0/0xf @ 1
initcall et1011c_init+0x0/0xf returned 0 after 0 usecs
calling ns_init+0x0/0xf @ 1
initcall ns_init+0x0/0xf returned 0 after 0 usecs
calling ksphy_init+0x0/0x4d @ 1
initcall ksphy_init+0x0/0x4d returned 0 after 0 usecs
calling e1000_init_module+0x0/0x80 @ 1
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
initcall e1000_init_module+0x0/0x80 returned 0 after 7812 usecs
calling e1000_init_module+0x0/0x39 @ 1
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
initcall e1000_init_module+0x0/0x39 returned 0 after 11718 usecs
calling igb_init_module+0x0/0x49 @ 1
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
initcall igb_init_module+0x0/0x49 returned 0 after 7812 usecs
calling igbvf_init_module+0x0/0x64 @ 1
Intel(R) Virtual Function Network Driver - version 1.0.0-k0
Copyright (c) 2009 Intel Corporation.
initcall igbvf_init_module+0x0/0x64 returned 0 after 7812 usecs
calling can_dev_init+0x0/0x29 @ 1
CAN device driver interface
initcall can_dev_init+0x0/0x29 returned 0 after 0 usecs
calling ems_usb_init+0x0/0x41 @ 1
CPC-USB kernel driver loaded
usbcore: registered new interface driver ems_usb
initcall ems_usb_init+0x0/0x41 returned 0 after 7812 usecs
calling sja1000_init+0x0/0x1e @ 1
sja1000 CAN netdevice driver
initcall sja1000_init+0x0/0x1e returned 0 after 3906 usecs
calling sp_init+0x0/0xf @ 1
initcall sp_init+0x0/0xf returned 0 after 0 usecs
calling kvaser_pci_init+0x0/0x16 @ 1
initcall kvaser_pci_init+0x0/0x16 returned 0 after 0 usecs
calling plx_pci_init+0x0/0x16 @ 1
initcall plx_pci_init+0x0/0x16 returned 0 after 0 usecs
calling mcp251x_can_init+0x0/0xf @ 1
initcall mcp251x_can_init+0x0/0xf returned 0 after 0 usecs
calling bonding_init+0x0/0x844 @ 1
bonding: Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details.
initcall bonding_init+0x0/0x844 returned 0 after 7812 usecs
calling atl2_init_module+0x0/0x49 @ 1
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
initcall atl2_init_module+0x0/0x49 returned 0 after 7812 usecs
calling atl1e_init_module+0x0/0x16 @ 1
initcall atl1e_init_module+0x0/0x16 returned 0 after 0 usecs
calling atl1c_init_module+0x0/0x16 @ 1
initcall atl1c_init_module+0x0/0x16 returned 0 after 0 usecs
calling jme_init_module+0x0/0x2d @ 1
jme: JMicron JMC2XX ethernet driver version 1.0.6
initcall jme_init_module+0x0/0x2d returned 0 after 3906 usecs
calling gem_init+0x0/0x16 @ 1
initcall gem_init+0x0/0x16 returned 0 after 0 usecs
calling vortex_init+0x0/0xc7 @ 1
initcall vortex_init+0x0/0xc7 returned 0 after 0 usecs
calling ne2k_pci_init+0x0/0x16 @ 1
initcall ne2k_pci_init+0x0/0x16 returned 0 after 0 usecs
calling pcnet32_init_module+0x0/0x112 @ 1
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
initcall pcnet32_init_module+0x0/0x112 returned 0 after 3906 usecs
calling e100_init_module+0x0/0x5a @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x5a returned 0 after 7812 usecs
calling tlan_probe+0x0/0x297 @ 1
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0 EISA: 0
initcall tlan_probe+0x0/0x297 returned -19 after 7812 usecs
calling smsc9420_init_module+0x0/0x36 @ 1
initcall smsc9420_init_module+0x0/0x36 returned 0 after 0 usecs
calling sis190_init_module+0x0/0x16 @ 1
initcall sis190_init_module+0x0/0x16 returned 0 after 0 usecs
calling sis900_init_module+0x0/0x16 @ 1
initcall sis900_init_module+0x0/0x16 returned 0 after 0 usecs
calling fealnx_init+0x0/0x16 @ 1
initcall fealnx_init+0x0/0x16 returned 0 after 0 usecs
calling tg3_init+0x0/0x16 @ 1
initcall tg3_init+0x0/0x16 returned 0 after 0 usecs
calling bnx2_init+0x0/0x16 @ 1
initcall bnx2_init+0x0/0x16 returned 0 after 0 usecs
calling skge_init_module+0x0/0x4d @ 1
initcall skge_init_module+0x0/0x4d returned 0 after 0 usecs
calling sky2_init_module+0x0/0x25 @ 1
sky2: driver version 1.28
initcall sky2_init_module+0x0/0x25 returned 0 after 3906 usecs
calling ks8842_init+0x0/0xf @ 1
initcall ks8842_init+0x0/0xf returned 0 after 0 usecs
calling ks8851_init+0x0/0xf @ 1
initcall ks8851_init+0x0/0xf returned 0 after 0 usecs
calling ksz884x_init_module+0x0/0x16 @ 1
initcall ksz884x_init_module+0x0/0x16 returned 0 after 0 usecs
calling rhine_init+0x0/0x64 @ 1
initcall rhine_init+0x0/0x64 returned 0 after 0 usecs
calling velocity_init_module+0x0/0x16 @ 1
initcall velocity_init_module+0x0/0x16 returned 0 after 0 usecs
calling sundance_init+0x0/0x16 @ 1
initcall sundance_init+0x0/0x16 returned 0 after 0 usecs
calling hamachi_init+0x0/0x16 @ 1
initcall hamachi_init+0x0/0x16 returned 0 after 0 usecs
calling net_olddevs_init+0x0/0x91 @ 1
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth0: incorrect signature at 300[c]: 0xffff!=0x630E
cs89x0: request_region(0x320, 0x10) failed
PP_addr at 340[a]: 0xffff
eth0: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth0: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth0: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth0: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth0: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth0: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth0: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth0: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth0: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth0: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
initcall net_olddevs_init+0x0/0x91 returned 0 after 70312 usecs
calling hp100_module_init+0x0/0x46 @ 1
initcall hp100_module_init+0x0/0x46 returned 0 after 0 usecs
calling NS8390p_init_module+0x0/0x7 @ 1
initcall NS8390p_init_module+0x0/0x7 returned 0 after 0 usecs
calling ne3210_init+0x0/0x20 @ 1
initcall ne3210_init+0x0/0x20 returned 0 after 0 usecs
calling init_nic+0x0/0x16 @ 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
IOAPIC[0]: Set routing entry (2-11 -> 0x49 -> IRQ 35 Mode:1 Active:1)
forcedeth 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 35
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
ata1.00: configured for UDMA/100
async_waiting @ 86
async_continuing @ 86 after 0 usec
scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
initcall 1_async_port_probe+0x0/0xd0 returned 0 after 742187 usecs
calling 3_sd_probe_async+0x0/0x1f0 @ 86
async_continuing @ 87 after 746093 usec
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
initcall 3_sd_probe_async+0x0/0x1f0 returned 0 after 105468 usecs
ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
ata2.01: configured for UDMA/33
async_waiting @ 87
async_continuing @ 87 after 0 usec
scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg1 type 5
initcall 2_async_port_probe+0x0/0xd0 returned 0 after 968750 usecs
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
initcall init_nic+0x0/0x16 returned 0 after 539062 usecs
calling ql3xxx_init_module+0x0/0x16 @ 1
initcall ql3xxx_init_module+0x0/0x16 returned 0 after 0 usecs
calling ppp_init+0x0/0xe3 @ 1
PPP generic driver version 2.4.2
initcall ppp_init+0x0/0xe3 returned 0 after 3906 usecs
calling ppp_async_init+0x0/0x33 @ 1
initcall ppp_async_init+0x0/0x33 returned 0 after 0 usecs
calling ppp_sync_init+0x0/0x33 @ 1
initcall ppp_sync_init+0x0/0x33 returned 0 after 0 usecs
calling bsdcomp_init+0x0/0x29 @ 1
PPP BSD Compression module registered
initcall bsdcomp_init+0x0/0x29 returned 0 after 3906 usecs
calling ppp_mppe_init+0x0/0x127 @ 1
PPP MPPE Compression module registered
initcall ppp_mppe_init+0x0/0x127 returned 0 after 3906 usecs
calling slip_init+0x0/0x9c @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
initcall slip_init+0x0/0x9c returned 0 after 3906 usecs
calling dummy_init_module+0x0/0x9f @ 1
initcall dummy_init_module+0x0/0x9f returned 0 after 0 usecs
calling macvlan_init_module+0x0/0x45 @ 1
initcall macvlan_init_module+0x0/0x45 returned 0 after 0 usecs
calling macvtap_init+0x0/0xc0 @ 1
initcall macvtap_init+0x0/0xc0 returned 0 after 0 usecs
calling dfx_init+0x0/0x29 @ 1
initcall dfx_init+0x0/0x29 returned 0 after 0 usecs
calling ibmlana_init_module+0x0/0xf @ 1
initcall ibmlana_init_module+0x0/0xf returned 0 after 0 usecs
calling rtl8139_init_module+0x0/0x16 @ 1
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:05:07.0: PCI->APIC IRQ transform: INT A -> IRQ 35
8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0xc000, 00:c0:df:03:68:5d, IRQ 35
initcall rtl8139_init_module+0x0/0x16 returned 0 after 15625 usecs
calling depca_module_init+0x0/0xdd @ 1
initcall depca_module_init+0x0/0xdd returned 0 after 0 usecs
calling sc92031_init+0x0/0x16 @ 1
initcall sc92031_init+0x0/0x16 returned 0 after 0 usecs
calling eql_init_module+0x0/0x57 @ 1
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
initcall eql_init_module+0x0/0x57 returned 0 after 3906 usecs
calling tun_init+0x0/0x8b @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0x8b returned 0 after 7812 usecs
calling rio_init+0x0/0x16 @ 1
initcall rio_init+0x0/0x16 returned 0 after 0 usecs
calling rtl8169_init_module+0x0/0x16 @ 1
initcall rtl8169_init_module+0x0/0x16 returned 0 after 0 usecs
calling amd8111e_init+0x0/0x16 @ 1
initcall amd8111e_init+0x0/0x16 returned 0 after 0 usecs
calling enc28j60_init+0x0/0x1e @ 1
initcall enc28j60_init+0x0/0x1e returned 0 after 0 usecs
calling hdlc_module_init+0x0/0x3d @ 1
HDLC support module revision 1.22
initcall hdlc_module_init+0x0/0x3d returned 0 after 0 usecs
calling mod_init+0x0/0x11 @ 1
initcall mod_init+0x0/0x11 returned 0 after 0 usecs
calling mod_init+0x0/0x11 @ 1
initcall mod_init+0x0/0x11 returned 0 after 0 usecs
calling mod_init+0x0/0x11 @ 1
initcall mod_init+0x0/0x11 returned 0 after 0 usecs
calling mod_init+0x0/0x2f @ 1
initcall mod_init+0x0/0x2f returned 0 after 0 usecs
calling fst_init+0x0/0x29 @ 1
initcall fst_init+0x0/0x29 returned 0 after 0 usecs
calling init_lmc+0x0/0x16 @ 1
initcall init_lmc+0x0/0x16 returned 0 after 0 usecs
calling init_dlci+0x0/0x32 @ 1
DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
initcall init_dlci+0x0/0x32 returned 0 after 3906 usecs
calling n2_init+0x0/0x9ed @ 1
initcall n2_init+0x0/0x9ed returned -22 after 0 usecs
initcall n2_init+0x0/0x9ed returned with error code -22
calling c101_init+0x0/0x646 @ 1
initcall c101_init+0x0/0x646 returned -22 after 0 usecs
initcall c101_init+0x0/0x646 returned with error code -22
calling wanxl_init_module+0x0/0x16 @ 1
initcall wanxl_init_module+0x0/0x16 returned 0 after 0 usecs
calling arcnet_init+0x0/0x54 @ 1
arcnet loaded.
initcall arcnet_init+0x0/0x54 returned 0 after 3906 usecs
calling arcnet_rfc1201_init+0x0/0x69 @ 1
arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
initcall arcnet_rfc1201_init+0x0/0x69 returned 0 after 3906 usecs
calling arcnet_rfc1051_init+0x0/0x41 @ 1
arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
initcall arcnet_rfc1051_init+0x0/0x41 returned 0 after 3906 usecs
calling arcnet_raw_init+0x0/0x56 @ 1
arcnet: raw mode (`r') encapsulation support loaded.
initcall arcnet_raw_init+0x0/0x56 returned 0 after 3906 usecs
calling com90io_init+0x0/0x486 @ 1
arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
E-mail me if you actually test this driver, please!
arc%d: No autoprobe for IO mapped cards; you must specify the base address!
initcall com90io_init+0x0/0x486 returned -19 after 11718 usecs
calling arc_rimi_init+0x0/0x472 @ 1
arcnet: RIM I (entirely mem-mapped) support
E-mail me if you actually test the RIM I driver, please!
arc%d: Given: node 00h, shmem 0h, irq 0
arc%d: No autoprobe for RIM I; you must specify the shmem and irq!
initcall arc_rimi_init+0x0/0x472 returned -5 after 15625 usecs
initcall arc_rimi_init+0x0/0x472 returned with error code -5
calling com20020_init+0x0/0x296 @ 1
arcnet: COM20020 ISA support (by David Woodhouse et al.)
arc%d: No autoprobe (yet) for IO mapped cards; you must specify the base address!
initcall com20020_init+0x0/0x296 returned -5 after 7812 usecs
initcall com20020_init+0x0/0x296 returned with error code -5
calling com20020pci_init+0x0/0x2e @ 1
arcnet: COM20020 PCI support
initcall com20020pci_init+0x0/0x2e returned 0 after 0 usecs
calling catc_init+0x0/0x30 @ 1
usbcore: registered new interface driver catc
catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
initcall catc_init+0x0/0x30 returned 0 after 7812 usecs
calling kaweth_init+0x0/0x16 @ 1
usbcore: registered new interface driver kaweth
initcall kaweth_init+0x0/0x16 returned 0 after 3906 usecs
calling pegasus_init+0x0/0x137 @ 1
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x137 returned 0 after 7812 usecs
calling hso_init+0x0/0x14a @ 1
hso: drivers/net/usb/hso.c: 1.2 Option Wireless
usbcore: registered new interface driver hso
initcall hso_init+0x0/0x14a returned 0 after 7812 usecs
calling cdc_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x16 returned 0 after 3906 usecs
calling dm9601_init+0x0/0x16 @ 1
usbcore: registered new interface driver dm9601
initcall dm9601_init+0x0/0x16 returned 0 after 3906 usecs
calling smsc95xx_init+0x0/0x16 @ 1
usbcore: registered new interface driver smsc95xx
initcall smsc95xx_init+0x0/0x16 returned 0 after 3906 usecs
calling rndis_init+0x0/0x16 @ 1
usbcore: registered new interface driver rndis_host
initcall rndis_init+0x0/0x16 returned 0 after 3906 usecs
calling cdc_subset_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_subset
initcall cdc_subset_init+0x0/0x16 returned 0 after 3906 usecs
calling zaurus_init+0x0/0x16 @ 1
usbcore: registered new interface driver zaurus
initcall zaurus_init+0x0/0x16 returned 0 after 3906 usecs
calling mcs7830_init+0x0/0x16 @ 1
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
initcall mcs7830_init+0x0/0x16 returned 0 after 3906 usecs
calling usbnet_init+0x0/0x26 @ 1
initcall usbnet_init+0x0/0x26 returned 0 after 0 usecs
calling int51x1_init+0x0/0x16 @ 1
usbcore: registered new interface driver int51x1
initcall int51x1_init+0x0/0x16 returned 0 after 3906 usecs
calling ipheth_init+0x0/0x35 @ 1
usbcore: registered new interface driver ipheth
initcall ipheth_init+0x0/0x35 returned 0 after 3906 usecs
calling sierra_net_init+0x0/0x16 @ 1
usbcore: registered new interface driver sierra_net
initcall sierra_net_init+0x0/0x16 returned 0 after 3906 usecs
calling ipw2100_init+0x0/0x68 @ 1
ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
ipw2100: Copyright(c) 2003-2006 Intel Corporation
initcall ipw2100_init+0x0/0x68 returned 0 after 7812 usecs
calling libipw_init+0x0/0x9d @ 1
libipw: 802.11 data/management/control stack, git-1.1.13
libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
initcall libipw_init+0x0/0x9d returned 0 after 7812 usecs
calling atmel_init_module+0x0/0x16 @ 1
initcall atmel_init_module+0x0/0x16 returned 0 after 0 usecs
calling at76_mod_init+0x0/0x64 @ 1
Atmel at76x USB Wireless LAN Driver 0.17 loading
usbcore: registered new interface driver at76c50x-usb
initcall at76_mod_init+0x0/0x64 returned 0 after 7812 usecs
calling prism54_module_init+0x0/0x35 @ 1
Loaded prism54 driver, version 1.2
initcall prism54_module_init+0x0/0x35 returned 0 after 3906 usecs
calling hostap_init+0x0/0x3f @ 1
initcall hostap_init+0x0/0x3f returned 0 after 0 usecs
calling init_prism2_pci+0x0/0x16 @ 1
initcall init_prism2_pci+0x0/0x16 returned 0 after 0 usecs
calling b43legacy_init+0x0/0x59 @ 1
Broadcom 43xx-legacy driver loaded [ Features: PLI, Firmware-ID: FW10 ]
initcall b43legacy_init+0x0/0x59 returned 0 after 3906 usecs
calling rtl8180_init+0x0/0x16 @ 1
initcall rtl8180_init+0x0/0x16 returned 0 after 0 usecs
calling rtl8187_init+0x0/0x16 @ 1
usbcore: registered new interface driver rtl8187
initcall rtl8187_init+0x0/0x16 returned 0 after 3906 usecs
calling rndis_wlan_init+0x0/0x16 @ 1
usbcore: registered new interface driver rndis_wlan
initcall rndis_wlan_init+0x0/0x16 returned 0 after 3906 usecs
calling zd1201_init+0x0/0x16 @ 1
usbcore: registered new interface driver zd1201
initcall zd1201_init+0x0/0x16 returned 0 after 3906 usecs
calling lbs_init_module+0x0/0xbf @ 1
initcall lbs_init_module+0x0/0xbf returned 0 after 0 usecs
calling if_usb_init_module+0x0/0xa6 @ 1
usbcore: registered new interface driver usb8xxx
initcall if_usb_init_module+0x0/0xa6 returned 0 after 3906 usecs
calling if_sdio_init_module+0x0/0xc6 @ 1
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
initcall if_sdio_init_module+0x0/0xc6 returned 0 after 3906 usecs
calling adm8211_init+0x0/0x16 @ 1
initcall adm8211_init+0x0/0x16 returned 0 after 0 usecs
calling mwl8k_init+0x0/0x16 @ 1
initcall mwl8k_init+0x0/0x16 returned 0 after 0 usecs
calling p54u_init+0x0/0x16 @ 1
usbcore: registered new interface driver p54usb
initcall p54u_init+0x0/0x16 returned 0 after 3906 usecs
calling p54p_init+0x0/0x16 @ 1
initcall p54p_init+0x0/0x16 returned 0 after 0 usecs
calling init_ath5k_pci+0x0/0x30 @ 1
initcall init_ath5k_pci+0x0/0x30 returned 0 after 0 usecs
calling ath9k_init+0x0/0x6c @ 1
initcall ath9k_init+0x0/0x6c returned 0 after 0 usecs
calling ath9k_init+0x0/0x7 @ 1
initcall ath9k_init+0x0/0x7 returned 0 after 0 usecs
calling ath9k_cmn_init+0x0/0x7 @ 1
initcall ath9k_cmn_init+0x0/0x7 returned 0 after 0 usecs
calling ath9k_htc_init+0x0/0x4c @ 1
usbcore: registered new interface driver ath9k_hif_usb
initcall ath9k_htc_init+0x0/0x4c returned 0 after 3906 usecs
calling init_mac80211_hwsim+0x0/0x642 @ 1
mac80211_hwsim: Initializing radio 0
phy0: Selected rate control algorithm 'minstrel'
phy0: hwaddr 02:00:00:00:00:00 registered
mac80211_hwsim: Initializing radio 1
phy1: Selected rate control algorithm 'minstrel'
phy1: hwaddr 02:00:00:00:01:00 registered
initcall init_mac80211_hwsim+0x0/0x642 returned 0 after 27343 usecs
calling dmfe_init_module+0x0/0xe4 @ 1
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
initcall dmfe_init_module+0x0/0xe4 returned 0 after 3906 usecs
calling tulip_init+0x0/0x2a @ 1
initcall tulip_init+0x0/0x2a returned 0 after 0 usecs
calling de4x5_module_init+0x0/0x26 @ 1
initcall de4x5_module_init+0x0/0x26 returned 0 after 0 usecs
calling init_netconsole+0x0/0x1e8 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x1e8 returned 0 after 3906 usecs
calling i2400m_driver_init+0x0/0x19 @ 1
initcall i2400m_driver_init+0x0/0x19 returned 0 after 0 usecs
calling i2400ms_driver_init+0x0/0x19 @ 1
initcall i2400ms_driver_init+0x0/0x19 returned 0 after 0 usecs
calling zatm_init_module+0x0/0x16 @ 1
initcall zatm_init_module+0x0/0x16 returned 0 after 0 usecs
calling uPD98402_module_init+0x0/0x7 @ 1
initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs
calling nicstar_init+0x0/0x5b @ 1
initcall nicstar_init+0x0/0x5b returned 0 after 0 usecs
calling amb_module_init+0x0/0x12b @ 1
Madge ATM Ambassador driver version 1.2.4
initcall amb_module_init+0x0/0x12b returned 0 after 3906 usecs
calling fore200e_module_init+0x0/0x25 @ 1
fore200e: FORE Systems 200E-series ATM driver - version 0.3e
initcall fore200e_module_init+0x0/0x25 returned 0 after 3906 usecs
calling eni_init+0x0/0x16 @ 1
initcall eni_init+0x0/0x16 returned 0 after 0 usecs
calling atmtcp_init+0x0/0x11 @ 1
initcall atmtcp_init+0x0/0x11 returned 0 after 0 usecs
calling firestream_init_module+0x0/0x16 @ 1
initcall firestream_init_module+0x0/0x16 returned 0 after 0 usecs
calling lanai_module_init+0x0/0x30 @ 1
initcall lanai_module_init+0x0/0x30 returned 0 after 0 usecs
calling he_init+0x0/0x16 @ 1
initcall he_init+0x0/0x16 returned 0 after 0 usecs
calling i2o_iop_init+0x0/0x45 @ 1
I2O subsystem v1.325
i2o: max drivers = 8
initcall i2o_iop_init+0x0/0x45 returned 0 after 3906 usecs
calling i2o_config_init+0x0/0x3f @ 1
I2O Configuration OSM v1.323
initcall i2o_config_init+0x0/0x3f returned 0 after 3906 usecs
calling i2o_bus_init+0x0/0x3e @ 1
I2O Bus Adapter OSM v1.317
initcall i2o_bus_init+0x0/0x3e returned 0 after 3906 usecs
calling i2o_scsi_init+0x0/0x3e @ 1
I2O SCSI Peripheral OSM v1.316
initcall i2o_scsi_init+0x0/0x3e returned 0 after 0 usecs
calling fusion_init+0x0/0x113 @ 1
Fusion MPT base driver 3.04.15
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0x113 returned 0 after 7812 usecs
calling mptspi_init+0x0/0xc2 @ 1
Fusion MPT SPI Host driver 3.04.15
initcall mptspi_init+0x0/0xc2 returned 0 after 3906 usecs
calling mptfc_init+0x0/0xd5 @ 1
Fusion MPT FC Host driver 3.04.15
initcall mptfc_init+0x0/0xd5 returned 0 after 3906 usecs
calling mptctl_init+0x0/0x13d @ 1
Fusion MPT misc device (ioctl) driver 3.04.15
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
initcall mptctl_init+0x0/0x13d returned 0 after 11718 usecs
calling mpt_lan_init+0x0/0x84 @ 1
Fusion MPT LAN driver 3.04.15
initcall mpt_lan_init+0x0/0x84 returned 0 after 3906 usecs
calling fw_core_init+0x0/0x81 @ 1
initcall fw_core_init+0x0/0x81 returned 0 after 0 usecs
calling fw_ohci_init+0x0/0x16 @ 1
initcall fw_ohci_init+0x0/0x16 returned 0 after 0 usecs
calling sbp2_init+0x0/0x4a @ 1
initcall sbp2_init+0x0/0x4a returned 0 after 0 usecs
calling ohci1394_init+0x0/0x16 @ 1
initcall ohci1394_init+0x0/0x16 returned 0 after 0 usecs
calling video1394_init_module+0x0/0xac @ 1
video1394: Installed video1394 module
initcall video1394_init_module+0x0/0xac returned 0 after 3906 usecs
calling init_raw1394+0x0/0xec @ 1
ieee1394: raw1394: /dev/raw1394 device initialized
initcall init_raw1394+0x0/0xec returned 0 after 3906 usecs
calling ether1394_init_module+0x0/0x6c @ 1
initcall ether1394_init_module+0x0/0x6c returned 0 after 0 usecs
calling cdrom_init+0x0/0x5b @ 1
initcall cdrom_init+0x0/0x5b returned 0 after 0 usecs
calling aoe_init+0x0/0xa4 @ 1
aoe: AoE v47 initialised.
initcall aoe_init+0x0/0xa4 returned 0 after 0 usecs
calling uwb_subsys_init+0x0/0x49 @ 1
initcall uwb_subsys_init+0x0/0x49 returned 0 after 0 usecs
calling umc_bus_init+0x0/0xf @ 1
initcall umc_bus_init+0x0/0xf returned 0 after 0 usecs
calling whci_init+0x0/0x16 @ 1
initcall whci_init+0x0/0x16 returned 0 after 3906 usecs
calling whcrc_driver_init+0x0/0x16 @ 1
initcall whcrc_driver_init+0x0/0x16 returned 0 after 0 usecs
calling hwarc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver hwa-rc
initcall hwarc_driver_init+0x0/0x16 returned 0 after 3906 usecs
calling i1480_dfu_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver i1480-dfu-usb
initcall i1480_dfu_driver_init+0x0/0x16 returned 0 after 3906 usecs
calling i1480_est_init+0x0/0x94 @ 1
initcall i1480_est_init+0x0/0x94 returned 0 after 0 usecs
calling mon_init+0x0/0xdf @ 1
initcall mon_init+0x0/0xdf returned 0 after 0 usecs
calling ehci_hcd_init+0x0/0xdc @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; probably buggy MP table
ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
initcall ehci_hcd_init+0x0/0xdc returned 0 after 19531 usecs
calling oxu_module_init+0x0/0xf @ 1
initcall oxu_module_init+0x0/0xf returned 0 after 0 usecs
calling isp116x_init+0x0/0x3e @ 1
116x: driver isp116x-hcd, 03 Nov 2005
initcall isp116x_init+0x0/0x3e returned 0 after 3906 usecs
calling ohci_hcd_mod_init+0x0/0xad @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; probably buggy MP table
ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
initcall ohci_hcd_mod_init+0x0/0xad returned 0 after 15625 usecs
calling uhci_hcd_init+0x0/0x129 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0x129 returned 0 after 7812 usecs
calling xhci_hcd_init+0x0/0x28 @ 1
initcall xhci_hcd_init+0x0/0x28 returned 0 after 0 usecs
calling sl811h_init+0x0/0x3e @ 1
sl811: driver sl811-hcd, 19 May 2005
initcall sl811h_init+0x0/0x3e returned 0 after 3906 usecs
calling r8a66597_init+0x0/0x3e @ 1
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
initcall r8a66597_init+0x0/0x3e returned 0 after 3906 usecs
calling hwahc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver hwa-hc
initcall hwahc_driver_init+0x0/0x16 returned 0 after 3906 usecs
calling wusbcore_init+0x0/0x77 @ 1
initcall wusbcore_init+0x0/0x77 returned 0 after 0 usecs
calling cbaf_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver wusb-cbaf
initcall cbaf_driver_init+0x0/0x16 returned 0 after 3906 usecs
calling usblp_init+0x0/0x16 @ 1
usbcore: registered new interface driver usblp
initcall usblp_init+0x0/0x16 returned 0 after 3906 usecs
calling usbtmc_init+0x0/0x30 @ 1
usbcore: registered new interface driver usbtmc
initcall usbtmc_init+0x0/0x30 returned 0 after 3906 usecs
calling usb_stor_init+0x0/0x46 @ 1
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
initcall usb_stor_init+0x0/0x46 returned 0 after 11718 usecs
calling usb_usual_init+0x0/0x30 @ 1
usbcore: registered new interface driver libusual
initcall usb_usual_init+0x0/0x30 returned 0 after 3906 usecs
calling alauda_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-alauda
initcall alauda_init+0x0/0x16 returned 0 after 3906 usecs
calling datafab_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-datafab
initcall datafab_init+0x0/0x16 returned 0 after 3906 usecs
calling freecom_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-freecom
initcall freecom_init+0x0/0x16 returned 0 after 3906 usecs
calling jumpshot_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-jumpshot
initcall jumpshot_init+0x0/0x16 returned 0 after 3906 usecs
calling karma_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-karma
initcall karma_init+0x0/0x16 returned 0 after 3906 usecs
calling sddr09_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-sddr09
initcall sddr09_init+0x0/0x16 returned 0 after 3906 usecs
calling usbat_init+0x0/0x16 @ 1
usbcore: registered new interface driver ums-usbat
initcall usbat_init+0x0/0x16 returned 0 after 3906 usecs
calling usb_mdc800_init+0x0/0x27f @ 1
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
initcall usb_mdc800_init+0x0/0x27f returned 0 after 7812 usecs
calling microtek_drv_init+0x0/0x16 @ 1
usbcore: registered new interface driver microtekX6
initcall microtek_drv_init+0x0/0x16 returned 0 after 3906 usecs
calling appledisplay_init+0x0/0x5d @ 1
usbcore: registered new interface driver appledisplay
initcall appledisplay_init+0x0/0x5d returned 0 after 3906 usecs
calling usb_cytherm_init+0x0/0x43 @ 1
usbcore: registered new interface driver cytherm
cytherm: v1.0:Cypress USB Thermometer driver
initcall usb_cytherm_init+0x0/0x43 returned 0 after 7812 usecs
calling emi26_init+0x0/0x16 @ 1
usbcore: registered new interface driver emi26 - firmware loader
initcall emi26_init+0x0/0x16 returned 0 after 3906 usecs
calling emi62_init+0x0/0x30 @ 1
usbcore: registered new interface driver emi62 - firmware loader
initcall emi62_init+0x0/0x30 returned 0 after 3906 usecs
calling isight_firmware_init+0x0/0x16 @ 1
usbcore: registered new interface driver isight_firmware
initcall isight_firmware_init+0x0/0x16 returned 0 after 7812 usecs
calling usb_led_init+0x0/0x35 @ 1
usbcore: registered new interface driver usbled
initcall usb_led_init+0x0/0x35 returned 0 after 3906 usecs
calling lego_usb_tower_init+0x0/0x9d @ 1
drivers/usb/misc/legousbtower.c: lego_usb_tower_init: enter
usbcore: registered new interface driver legousbtower
legousbtower: v0.96:LEGO USB Tower Driver
drivers/usb/misc/legousbtower.c: lego_usb_tower_init: leave, return value 0
initcall lego_usb_tower_init+0x0/0x9d returned 0 after 15625 usecs
calling usb_rio_init+0x0/0x30 @ 1
usbcore: registered new interface driver rio500
rio500: v1.1:USB Rio 500 driver
initcall usb_rio_init+0x0/0x30 returned 0 after 3906 usecs
calling usbtest_init+0x0/0x42 @ 1
usbcore: registered new interface driver usbtest
initcall usbtest_init+0x0/0x42 returned 0 after 3906 usecs
calling uss720_init+0x0/0x54 @ 1
usbcore: registered new interface driver uss720
uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
uss720: NOTE: this is a special purpose driver to allow nonstandard
uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
uss720: If you just want to connect to a printer, use usblp instead
initcall uss720_init+0x0/0x54 returned 0 after 19531 usecs
calling usb_sevseg_init+0x0/0x35 @ 1
usbcore: registered new interface driver usbsevseg
initcall usb_sevseg_init+0x0/0x35 returned 0 after 3906 usecs
calling i8042_init+0x0/0xd2 @ 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0xd2 returned 0 after 7812 usecs
calling parkbd_init+0x0/0x1ae @ 1
parport0: cannot grant exclusive access for device parkbd
initcall parkbd_init+0x0/0x1ae returned -19 after 3906 usecs
calling ct82c710_init+0x0/0x167 @ 1
initcall ct82c710_init+0x0/0x167 returned -19 after 0 usecs
calling pcips2_init+0x0/0x16 @ 1
initcall pcips2_init+0x0/0x16 returned 0 after 0 usecs
calling serio_raw_init+0x0/0x16 @ 1
initcall serio_raw_init+0x0/0x16 returned 0 after 0 usecs
calling altera_ps2_init+0x0/0xf @ 1
initcall altera_ps2_init+0x0/0xf returned 0 after 0 usecs
calling emu_init+0x0/0x16 @ 1
initcall emu_init+0x0/0x16 returned 0 after 0 usecs
calling fm801_gp_init+0x0/0x16 @ 1
initcall fm801_gp_init+0x0/0x16 returned 0 after 0 usecs
calling l4_init+0x0/0x2ec @ 1
initcall l4_init+0x0/0x2ec returned -19 after 0 usecs
calling ns558_init+0x0/0x37c @ 1
initcall ns558_init+0x0/0x37c returned -19 after 7812 usecs
calling mousedev_init+0x0/0x7f @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x7f returned 0 after 3906 usecs
calling joydev_init+0x0/0xf @ 1
initcall joydev_init+0x0/0xf returned 0 after 0 usecs
calling evdev_init+0x0/0xf @ 1
initcall evdev_init+0x0/0xf returned 0 after 0 usecs
calling evbug_init+0x0/0xf @ 1
initcall evbug_init+0x0/0xf returned 0 after 0 usecs
calling atkbd_init+0x0/0x20 @ 1
initcall atkbd_init+0x0/0x20 returned 0 after 0 usecs
calling gpio_keys_init+0x0/0xf @ 1
initcall gpio_keys_init+0x0/0xf returned 0 after 0 usecs
calling lkkbd_init+0x0/0x16 @ 1
initcall lkkbd_init+0x0/0x16 returned 0 after 0 usecs
calling lm8323_init+0x0/0x11 @ 1
i2c-core: driver [lm8323] registered
initcall lm8323_init+0x0/0x11 returned 0 after 3906 usecs
calling nkbd_init+0x0/0x16 @ 1
initcall nkbd_init+0x0/0x16 returned 0 after 0 usecs
calling opencores_kbd_init+0x0/0xf @ 1
initcall opencores_kbd_init+0x0/0xf returned 0 after 0 usecs
calling skbd_init+0x0/0x16 @ 1
initcall skbd_init+0x0/0x16 returned 0 after 0 usecs
calling sunkbd_init+0x0/0x16 @ 1
initcall sunkbd_init+0x0/0x16 returned 0 after 0 usecs
calling xtkbd_init+0x0/0x16 @ 1
initcall xtkbd_init+0x0/0x16 returned 0 after 0 usecs
calling atp_init+0x0/0x16 @ 1
usbcore: registered new interface driver appletouch
initcall atp_init+0x0/0x16 returned 0 after 3906 usecs
calling bcm5974_init+0x0/0x16 @ 1
usbcore: registered new interface driver bcm5974
initcall bcm5974_init+0x0/0x16 returned 0 after 3906 usecs
calling inport_init+0x0/0x131 @ 1
inport.c: Didn't find InPort mouse at 0x23c
initcall inport_init+0x0/0x131 returned -19 after 3906 usecs
calling logibm_init+0x0/0x139 @ 1
logibm.c: Didn't find Logitech busmouse at 0x23c
initcall logibm_init+0x0/0x139 returned -19 after 3906 usecs
calling psmouse_init+0x0/0x7e @ 1
initcall psmouse_init+0x0/0x7e returned 0 after 0 usecs
calling sermouse_init+0x0/0x16 @ 1
initcall sermouse_init+0x0/0x16 returned 0 after 0 usecs
calling vsxxxaa_init+0x0/0x16 @ 1
initcall vsxxxaa_init+0x0/0x16 returned 0 after 0 usecs
calling a3d_init+0x0/0x16 @ 1
initcall a3d_init+0x0/0x16 returned 0 after 0 usecs
calling adi_init+0x0/0x16 @ 1
initcall adi_init+0x0/0x16 returned 0 after 0 usecs
calling analog_init+0x0/0xd3 @ 1
initcall analog_init+0x0/0xd3 returned 0 after 0 usecs
calling gc_init+0x0/0x63d @ 1
initcall gc_init+0x0/0x63d returned -19 after 0 usecs
calling grip_init+0x0/0x16 @ 1
initcall grip_init+0x0/0x16 returned 0 after 0 usecs
calling grip_init+0x0/0x16 @ 1
initcall grip_init+0x0/0x16 returned 0 after 0 usecs
calling guillemot_init+0x0/0x16 @ 1
initcall guillemot_init+0x0/0x16 returned 0 after 0 usecs
calling interact_init+0x0/0x16 @ 1
initcall interact_init+0x0/0x16 returned 0 after 0 usecs
calling joydump_init+0x0/0x16 @ 1
initcall joydump_init+0x0/0x16 returned 0 after 0 usecs
calling magellan_init+0x0/0x16 @ 1
initcall magellan_init+0x0/0x16 returned 0 after 0 usecs
calling sw_init+0x0/0x16 @ 1
initcall sw_init+0x0/0x16 returned 0 after 0 usecs
calling spaceball_init+0x0/0x16 @ 1
initcall spaceball_init+0x0/0x16 returned 0 after 0 usecs
calling spaceorb_init+0x0/0x16 @ 1
initcall spaceorb_init+0x0/0x16 returned 0 after 0 usecs
calling stinger_init+0x0/0x16 @ 1
initcall stinger_init+0x0/0x16 returned 0 after 0 usecs
calling tmdc_init+0x0/0x16 @ 1
initcall tmdc_init+0x0/0x16 returned 0 after 0 usecs
calling tgfx_init+0x0/0x3fd @ 1
initcall tgfx_init+0x0/0x3fd returned -19 after 0 usecs
calling warrior_init+0x0/0x16 @ 1
initcall warrior_init+0x0/0x16 returned 0 after 0 usecs
calling usb_xpad_init+0x0/0x30 @ 1
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
initcall usb_xpad_init+0x0/0x30 returned 0 after 3906 usecs
calling zhenhua_init+0x0/0x16 @ 1
initcall zhenhua_init+0x0/0x16 returned 0 after 0 usecs
calling walkera0701_init+0x0/0x1fa @ 1
walkera0701: parport without interrupt
initcall walkera0701_init+0x0/0x1fa returned -19 after 3906 usecs
calling usb_acecad_init+0x0/0x30 @ 1
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
initcall usb_acecad_init+0x0/0x30 returned 0 after 7812 usecs
calling gtco_init+0x0/0x4b @ 1
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x4b returned 0 after 7812 usecs
calling wacom_init+0x0/0x30 @ 1
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
initcall wacom_init+0x0/0x30 returned 0 after 3906 usecs
calling ad7877_init+0x0/0xf @ 1
initcall ad7877_init+0x0/0xf returned 0 after 0 usecs
calling ad7879_init+0x0/0x11 @ 1
i2c-core: driver [ad7879] registered
initcall ad7879_init+0x0/0x11 returned 0 after 3906 usecs
calling ads7846_init+0x0/0xf @ 1
initcall ads7846_init+0x0/0xf returned 0 after 0 usecs
calling dynapro_init+0x0/0x16 @ 1
initcall dynapro_init+0x0/0x16 returned 0 after 0 usecs
calling hampshire_init+0x0/0x16 @ 1
initcall hampshire_init+0x0/0x16 returned 0 after 0 usecs
calling gunze_init+0x0/0x16 @ 1
initcall gunze_init+0x0/0x16 returned 0 after 0 usecs
calling elo_init+0x0/0x16 @ 1
initcall elo_init+0x0/0x16 returned 0 after 0 usecs
calling fujitsu_init+0x0/0x16 @ 1
initcall fujitsu_init+0x0/0x16 returned 0 after 0 usecs
calling mcs5000_ts_init+0x0/0x11 @ 1
i2c-core: driver [mcs5000_ts] registered
initcall mcs5000_ts_init+0x0/0x11 returned 0 after 3906 usecs
calling mk712_init+0x0/0x1cc @ 1
mk712: device not present
initcall mk712_init+0x0/0x1cc returned -19 after 3906 usecs
calling htcpen_isa_init+0x0/0x29 @ 1
initcall htcpen_isa_init+0x0/0x29 returned -19 after 0 usecs
calling usbtouch_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbtouchscreen
initcall usbtouch_init+0x0/0x16 returned 0 after 3906 usecs
calling pm_init+0x0/0x16 @ 1
initcall pm_init+0x0/0x16 returned 0 after 0 usecs
calling touchit213_init+0x0/0x16 @ 1
initcall touchit213_init+0x0/0x16 returned 0 after 0 usecs
calling tr_init+0x0/0x16 @ 1
initcall tr_init+0x0/0x16 returned 0 after 0 usecs
calling tw_init+0x0/0x16 @ 1
initcall tw_init+0x0/0x16 returned 0 after 0 usecs
calling tsc2007_init+0x0/0x11 @ 1
i2c-core: driver [tsc2007] registered
initcall tsc2007_init+0x0/0x11 returned 0 after 3906 usecs
calling wm97xx_init+0x0/0xf @ 1
initcall wm97xx_init+0x0/0xf returned 0 after 0 usecs
calling tps6507x_ts_init+0x0/0xf @ 1
initcall tps6507x_ts_init+0x0/0xf returned 0 after 0 usecs
calling ad714x_i2c_init+0x0/0x11 @ 1
i2c-core: driver [ad714x_captouch] registered
initcall ad714x_i2c_init+0x0/0x11 returned 0 after 3906 usecs
calling ad714x_spi_init+0x0/0xf @ 1
initcall ad714x_spi_init+0x0/0xf returned 0 after 0 usecs
calling apanel_init+0x0/0x17b @ 1
apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
initcall apanel_init+0x0/0x17b returned -19 after 3906 usecs
calling ati_remote_init+0x0/0x43 @ 1
usbcore: registered new interface driver ati_remote
ati_remote: 2.2.1:ATI/X10 RF USB Remote Control
initcall ati_remote_init+0x0/0x43 returned 0 after 7812 usecs
calling ati_remote2_init+0x0/0x43 @ 1
usbcore: registered new interface driver ati_remote2
ati_remote2: ATI/Philips USB RF remote driver 0.3
initcall ati_remote2_init+0x0/0x43 returned 0 after 7812 usecs
calling cm109_init+0x0/0xfc @ 1
cm109: Keymap for Komunikate KIP1000 phone loaded
usbcore: registered new interface driver cm109
cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
initcall cm109_init+0x0/0xfc returned 0 after 11718 usecs
calling usb_keyspan_init+0x0/0x35 @ 1
usbcore: registered new interface driver keyspan_remote
initcall usb_keyspan_init+0x0/0x35 returned 0 after 3906 usecs
calling pcf8574_kp_init+0x0/0x11 @ 1
i2c-core: driver [pcf8574_keypad] registered
initcall pcf8574_kp_init+0x0/0x11 returned 0 after 3906 usecs
calling powermate_init+0x0/0x16 @ 1
usbcore: registered new interface driver powermate
initcall powermate_init+0x0/0x16 returned 0 after 3906 usecs
calling rotary_encoder_init+0x0/0xf @ 1
initcall rotary_encoder_init+0x0/0xf returned 0 after 0 usecs
calling uinput_init+0x0/0xf @ 1
initcall uinput_init+0x0/0xf returned 0 after 0 usecs
calling yealink_dev_init+0x0/0x30 @ 1
usbcore: registered new interface driver yealink
yealink: yld-20051230:Yealink phone driver
initcall yealink_dev_init+0x0/0x30 returned 0 after 7812 usecs
calling i2c_smbus_init+0x0/0x11 @ 1
i2c-core: driver [smbus_alert] registered
initcall i2c_smbus_init+0x0/0x11 returned 0 after 3906 usecs
calling i2c_dev_init+0x0/0xa7 @ 1
i2c /dev entries driver
i2c-core: driver [dev_driver] registered
initcall i2c_dev_init+0x0/0xa7 returned 0 after 3906 usecs
calling i2c_ali1535_init+0x0/0x16 @ 1
initcall i2c_ali1535_init+0x0/0x16 returned 0 after 0 usecs
calling ali1563_init+0x0/0x16 @ 1
initcall ali1563_init+0x0/0x16 returned 0 after 0 usecs
calling amd756_init+0x0/0x16 @ 1
initcall amd756_init+0x0/0x16 returned 0 after 0 usecs
calling i2c_amd8111_init+0x0/0x16 @ 1
initcall i2c_amd8111_init+0x0/0x16 returned 0 after 0 usecs
calling i2c_i801_init+0x0/0x82 @ 1
initcall i2c_i801_init+0x0/0x82 returned 0 after 0 usecs
calling i2c_sch_init+0x0/0xf @ 1
initcall i2c_sch_init+0x0/0xf returned 0 after 0 usecs
calling nforce2_init+0x0/0x16 @ 1
i2c i2c-0: adapter [SMBus nForce2 adapter at 4c00] registered
i2c i2c-0: found normal entry for adapter 0, addr 0x50
i2c i2c-0: Creating eeprom at 0x50
i2c 0-0050: uevent
eeprom 0-0050: probe
i2c i2c-0: client [eeprom] registered with bus id 0-0050
i2c i2c-0: found normal entry for adapter 0, addr 0x51
i2c i2c-0: Creating eeprom at 0x51
i2c 0-0051: uevent
eeprom 0-0051: probe
i2c i2c-0: client [eeprom] registered with bus id 0-0051
i2c i2c-0: found normal entry for adapter 0, addr 0x52
input: AT Translated Set 2 keyboard as /class/input/input0
evbug.c: Connected device: input0 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
i2c i2c-0: found normal entry for adapter 0, addr 0x53
i2c i2c-0: found normal entry for adapter 0, addr 0x54
i2c i2c-0: found normal entry for adapter 0, addr 0x55
i2c i2c-0: found normal entry for adapter 0, addr 0x56
i2c i2c-0: found normal entry for adapter 0, addr 0x57
i2c-dev: adapter [SMBus nForce2 adapter at 4c00] registered as minor 0
i2c i2c-0: nForce2 SMBus adapter at 0x4c00
i2c i2c-1: adapter [SMBus nForce2 adapter at 4c40] registered
i2c i2c-1: found normal entry for adapter 1, addr 0x50
i2c i2c-1: found normal entry for adapter 1, addr 0x51
i2c i2c-1: found normal entry for adapter 1, addr 0x52
i2c i2c-1: found normal entry for adapter 1, addr 0x53
i2c i2c-1: found normal entry for adapter 1, addr 0x54
i2c i2c-1: found normal entry for adapter 1, addr 0x55
i2c i2c-1: found normal entry for adapter 1, addr 0x56
i2c i2c-1: found normal entry for adapter 1, addr 0x57
i2c-dev: adapter [SMBus nForce2 adapter at 4c40] registered as minor 1
i2c i2c-1: nForce2 SMBus adapter at 0x4c40
initcall nforce2_init+0x0/0x16 returned 0 after 226562 usecs
calling i2c_sis5595_init+0x0/0x16 @ 1
initcall i2c_sis5595_init+0x0/0x16 returned 0 after 0 usecs
calling i2c_sis96x_init+0x0/0x16 @ 1
initcall i2c_sis96x_init+0x0/0x16 returned 0 after 0 usecs
calling ocores_i2c_init+0x0/0xf @ 1
initcall ocores_i2c_init+0x0/0xf returned 0 after 0 usecs
calling i2c_parport_init+0x0/0x4a @ 1
i2c-parport: adapter type unspecified
initcall i2c_parport_init+0x0/0x4a returned -19 after 3906 usecs
calling i2c_parport_init+0x0/0x159 @ 1
i2c-parport-light: adapter type unspecified
initcall i2c_parport_init+0x0/0x159 returned -19 after 3906 usecs
calling usb_i2c_tiny_usb_init+0x0/0x16 @ 1
usbcore: registered new interface driver i2c-tiny-usb
initcall usb_i2c_tiny_usb_init+0x0/0x16 returned 0 after 3906 usecs
calling i2c_pcfisa_init+0x0/0x14 @ 1
initcall i2c_pcfisa_init+0x0/0x14 returned 0 after 0 usecs
calling scx200_acb_init+0x0/0x22c @ 1
initcall scx200_acb_init+0x0/0x22c returned -19 after 0 usecs
calling init_rc_map_adstech_dvb_t_pci+0x0/0xf @ 1
initcall init_rc_map_adstech_dvb_t_pci+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_apac_viewcomp+0x0/0xf @ 1
initcall init_rc_map_apac_viewcomp+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_asus_pc39+0x0/0xf @ 1
initcall init_rc_map_asus_pc39+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_ati_tv_wonder_hd_600+0x0/0xf @ 1
initcall init_rc_map_ati_tv_wonder_hd_600+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avermedia_a16d+0x0/0xf @ 1
initcall init_rc_map_avermedia_a16d+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avermedia+0x0/0xf @ 1
initcall init_rc_map_avermedia+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avermedia_cardbus+0x0/0xf @ 1
initcall init_rc_map_avermedia_cardbus+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avermedia_dvbt+0x0/0xf @ 1
initcall init_rc_map_avermedia_dvbt+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avermedia_m135a+0x0/0xf @ 1
initcall init_rc_map_avermedia_m135a+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avermedia_m733a_rm_k6+0x0/0xf @ 1
initcall init_rc_map_avermedia_m733a_rm_k6+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_avertv_303+0x0/0xf @ 1
initcall init_rc_map_avertv_303+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_behold+0x0/0xf @ 1
initcall init_rc_map_behold+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_behold_columbus+0x0/0xf @ 1
initcall init_rc_map_behold_columbus+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_budget_ci_old+0x0/0xf @ 1
initcall init_rc_map_budget_ci_old+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_cinergy_1400+0x0/0xf @ 1
initcall init_rc_map_cinergy_1400+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_cinergy+0x0/0xf @ 1
initcall init_rc_map_cinergy+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_dm1105_nec+0x0/0xf @ 1
initcall init_rc_map_dm1105_nec+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_dntv_live_dvb_t+0x0/0xf @ 1
initcall init_rc_map_dntv_live_dvb_t+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_dntv_live_dvbt_pro+0x0/0xf @ 1
initcall init_rc_map_dntv_live_dvbt_pro+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_empty+0x0/0xf @ 1
initcall init_rc_map_empty+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_em_terratec+0x0/0xf @ 1
initcall init_rc_map_em_terratec+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_encore_enltv2+0x0/0xf @ 1
initcall init_rc_map_encore_enltv2+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_encore_enltv+0x0/0xf @ 1
initcall init_rc_map_encore_enltv+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_encore_enltv_fm53+0x0/0xf @ 1
initcall init_rc_map_encore_enltv_fm53+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_evga_indtube+0x0/0xf @ 1
initcall init_rc_map_evga_indtube+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_eztv+0x0/0xf @ 1
initcall init_rc_map_eztv+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_flydvb+0x0/0xf @ 1
initcall init_rc_map_flydvb+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_flyvideo+0x0/0xf @ 1
initcall init_rc_map_flyvideo+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_fusionhdtv_mce+0x0/0xf @ 1
initcall init_rc_map_fusionhdtv_mce+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_gadmei_rm008z+0x0/0xf @ 1
initcall init_rc_map_gadmei_rm008z+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_genius_tvgo_a11mce+0x0/0xf @ 1
initcall init_rc_map_genius_tvgo_a11mce+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_gotview7135+0x0/0xf @ 1
initcall init_rc_map_gotview7135+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_hauppauge_new+0x0/0xf @ 1
initcall init_rc_map_hauppauge_new+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_imon_mce+0x0/0xf @ 1
initcall init_rc_map_imon_mce+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_imon_pad+0x0/0xf @ 1
initcall init_rc_map_imon_pad+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_iodata_bctv7e+0x0/0xf @ 1
initcall init_rc_map_iodata_bctv7e+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_kaiomy+0x0/0xf @ 1
initcall init_rc_map_kaiomy+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_kworld_315u+0x0/0xf @ 1
initcall init_rc_map_kworld_315u+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_kworld_plus_tv_analog+0x0/0xf @ 1
initcall init_rc_map_kworld_plus_tv_analog+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_manli+0x0/0xf @ 1
initcall init_rc_map_manli+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_msi_tvanywhere+0x0/0xf @ 1
initcall init_rc_map_msi_tvanywhere+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_msi_tvanywhere_plus+0x0/0xf @ 1
initcall init_rc_map_msi_tvanywhere_plus+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_nebula+0x0/0xf @ 1
initcall init_rc_map_nebula+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_nec_terratec_cinergy_xs+0x0/0xf @ 1
initcall init_rc_map_nec_terratec_cinergy_xs+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_norwood+0x0/0xf @ 1
initcall init_rc_map_norwood+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_npgtech+0x0/0xf @ 1
initcall init_rc_map_npgtech+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pctv_sedna+0x0/0xf @ 1
initcall init_rc_map_pctv_sedna+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pinnacle_color+0x0/0xf @ 1
initcall init_rc_map_pinnacle_color+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pinnacle_grey+0x0/0xf @ 1
initcall init_rc_map_pinnacle_grey+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pinnacle_pctv_hd+0x0/0xf @ 1
initcall init_rc_map_pinnacle_pctv_hd+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pixelview+0x0/0xf @ 1
initcall init_rc_map_pixelview+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pixelview+0x0/0xf @ 1
initcall init_rc_map_pixelview+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pixelview_new+0x0/0xf @ 1
initcall init_rc_map_pixelview_new+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_powercolor_real_angel+0x0/0xf @ 1
initcall init_rc_map_powercolor_real_angel+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_proteus_2309+0x0/0xf @ 1
initcall init_rc_map_proteus_2309+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_purpletv+0x0/0xf @ 1
initcall init_rc_map_purpletv+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_pv951+0x0/0xf @ 1
initcall init_rc_map_pv951+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_rc5_hauppauge_new+0x0/0xf @ 1
initcall init_rc_map_rc5_hauppauge_new+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_rc5_tv+0x0/0xf @ 1
initcall init_rc_map_rc5_tv+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_real_audio_220_32_keys+0x0/0xf @ 1
initcall init_rc_map_real_audio_220_32_keys+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_tbs_nec+0x0/0xf @ 1
initcall init_rc_map_tbs_nec+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_terratec_cinergy_xs+0x0/0xf @ 1
initcall init_rc_map_terratec_cinergy_xs+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_tevii_nec+0x0/0xf @ 1
initcall init_rc_map_tevii_nec+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_tt_1500+0x0/0xf @ 1
initcall init_rc_map_tt_1500+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_videomate_s350+0x0/0xf @ 1
initcall init_rc_map_videomate_s350+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_videomate_tv_pvr+0x0/0xf @ 1
initcall init_rc_map_videomate_tv_pvr+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_winfast+0x0/0xf @ 1
initcall init_rc_map_winfast+0x0/0xf returned 0 after 0 usecs
calling init_rc_map_winfast_usbii_deluxe+0x0/0xf @ 1
initcall init_rc_map_winfast_usbii_deluxe+0x0/0xf returned 0 after 0 usecs
calling ir_core_init+0x0/0x35 @ 1
initcall ir_core_init+0x0/0x35 returned 0 after 0 usecs
calling ir_nec_decode_init+0x0/0x20 @ 1
IR NEC protocol handler initialized
initcall ir_nec_decode_init+0x0/0x20 returned 0 after 0 usecs
calling ir_rc6_decode_init+0x0/0x20 @ 1
IR RC6 protocol handler initialized
initcall ir_rc6_decode_init+0x0/0x20 returned 0 after 0 usecs
calling ir_sony_decode_init+0x0/0x20 @ 1
IR Sony protocol handler initialized
initcall ir_sony_decode_init+0x0/0x20 returned 0 after 3906 usecs
calling dabusb_init+0x0/0x9d @ 1
usbcore: registered new interface driver dabusb
dabusb: v1.54:DAB-USB Interface Driver for Linux (c)1999
initcall dabusb_init+0x0/0x9d returned 0 after 7812 usecs
calling w1_init+0x0/0x97 @ 1
Driver for 1-wire Dallas network protocol.
initcall w1_init+0x0/0x97 returned 0 after 3906 usecs
calling matrox_w1_init+0x0/0x16 @ 1
initcall matrox_w1_init+0x0/0x16 returned 0 after 0 usecs
calling ds_init+0x0/0x40 @ 1
usbcore: registered new interface driver DS9490R
initcall ds_init+0x0/0x40 returned 0 after 3906 usecs
calling sensors_ds2482_init+0x0/0x11 @ 1
i2c-core: driver [ds2482] registered
initcall sensors_ds2482_init+0x0/0x11 returned 0 after 3906 usecs
calling w1_therm_init+0x0/0x29 @ 1
initcall w1_therm_init+0x0/0x29 returned 0 after 0 usecs
calling w1_smem_init+0x0/0x33 @ 1
initcall w1_smem_init+0x0/0x33 returned 0 after 0 usecs
calling w1_f2d_init+0x0/0xf @ 1
initcall w1_f2d_init+0x0/0xf returned 0 after 0 usecs
calling w1_f23_init+0x0/0xf @ 1
initcall w1_f23_init+0x0/0xf returned 0 after 0 usecs
calling w1_ds2760_init+0x0/0x28 @ 1
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
initcall w1_ds2760_init+0x0/0x28 returned 0 after 3906 usecs
calling w1_bq27000_init+0x0/0x1d @ 1
initcall w1_bq27000_init+0x0/0x1d returned -17 after 0 usecs
initcall w1_bq27000_init+0x0/0x1d returned with error code -17
calling test_power_init+0x0/0x64 @ 1
power_supply test_ac: uevent
power_supply test_ac: POWER_SUPPLY_NAME=test_ac
power_supply test_ac: prop ONLINE=1
power_supply test_ac: power_supply_changed
power_supply test_battery: uevent
power_supply test_battery: POWER_SUPPLY_NAME=test_battery
power_supply test_battery: prop STATUS=Charging
power_supply test_battery: prop CHARGE_TYPE=Fast
power_supply test_battery: prop HEALTH=Good
power_supply test_battery: prop TECHNOLOGY=Li-ion
test_power_get_battery_property: some properties deliberately report errors.
power_supply test_battery: driver failed to report `charge_full' property
power_supply test_battery: power_supply_changed
initcall test_power_init+0x0/0x64 returned 0 after 46875 usecs
calling ds278x_init+0x0/0x11 @ 1
i2c-core: driver [ds2782-battery] registered
initcall ds278x_init+0x0/0x11 returned 0 after 3906 usecs
calling wm97xx_bat_init+0x0/0xf @ 1
initcall wm97xx_bat_init+0x0/0xf returned 0 after 0 usecs
calling max17040_init+0x0/0x11 @ 1
i2c-core: driver [max17040] registered
initcall max17040_init+0x0/0x11 returned 0 after 3906 usecs
calling gigaset_init_module+0x0/0x2e @ 1
gigaset: Driver for Gigaset 307x
gigaset: no ISDN subsystem interface
initcall gigaset_init_module+0x0/0x2e returned 0 after 3906 usecs
calling usb_gigaset_init+0x0/0x90 @ 1
usbcore: registered new interface driver usb_gigaset
usb_gigaset: USB Driver for Gigaset 307x using M105
initcall usb_gigaset_init+0x0/0x90 returned 0 after 7812 usecs
calling virtual_eisa_root_init+0x0/0x4d @ 1
EISA: Probing bus 0 at eisa.0
EISA: Cannot allocate resource for mainboard
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
Cannot allocate resource for EISA slot 6
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
initcall virtual_eisa_root_init+0x0/0x4d returned 0 after 39062 usecs
calling init+0x0/0x1de @ 1
lguest: mapped switcher at ffc00000
initcall init+0x0/0x1de returned 0 after 3906 usecs
calling cpufreq_stats_init+0x0/0x48 @ 1
initcall cpufreq_stats_init+0x0/0x48 returned 0 after 0 usecs
calling cpufreq_gov_powersave_init+0x0/0xf @ 1
initcall cpufreq_gov_powersave_init+0x0/0xf returned 0 after 0 usecs
calling cpufreq_gov_dbs_init+0x0/0x7b @ 1
power_supply test_ac: power_supply_changed_work
power_supply test_ac: power_supply_update_gen_leds 1
power_supply test_ac: uevent
power_supply test_ac: POWER_SUPPLY_NAME=test_ac
power_supply test_ac: prop ONLINE=1
power_supply test_battery: power_supply_changed_work
power_supply test_battery: power_supply_update_bat_leds 1
power_supply test_battery: uevent
power_supply test_battery: POWER_SUPPLY_NAME=test_battery
power_supply test_battery: prop STATUS=Charging
power_supply test_battery: prop CHARGE_TYPE=Fast
power_supply test_battery: prop HEALTH=Good
power_supply test_battery: prop TECHNOLOGY=Li-ion
test_power_get_battery_property: some properties deliberately report errors.
power_supply test_battery: driver failed to report `charge_full' property
initcall cpufreq_gov_dbs_init+0x0/0x7b returned 0 after 58593 usecs
calling mmc_blk_init+0x0/0x3d @ 1
initcall mmc_blk_init+0x0/0x3d returned 0 after 0 usecs
calling sdio_uart_init+0x0/0xc3 @ 1
initcall sdio_uart_init+0x0/0xc3 returned 0 after 0 usecs
calling sdhci_drv_init+0x0/0x22 @ 1
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
initcall sdhci_drv_init+0x0/0x22 returned 0 after 3906 usecs
calling sdhci_drv_init+0x0/0xf @ 1
initcall sdhci_drv_init+0x0/0xf returned 0 after 0 usecs
calling wbsd_drv_init+0x0/0x7b @ 1
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
initcall wbsd_drv_init+0x0/0x7b returned 0 after 7812 usecs
calling tifm_sd_init+0x0/0xf @ 1
initcall tifm_sd_init+0x0/0xf returned 0 after 0 usecs
calling memstick_init+0x0/0x81 @ 1
initcall memstick_init+0x0/0x81 returned 0 after 0 usecs
calling mspro_block_init+0x0/0x6c @ 1
initcall mspro_block_init+0x0/0x6c returned 0 after 0 usecs
calling tifm_ms_init+0x0/0xf @ 1
initcall tifm_ms_init+0x0/0xf returned 0 after 0 usecs
calling bd2802_init+0x0/0x11 @ 1
i2c-core: driver [BD2802] registered
initcall bd2802_init+0x0/0x11 returned 0 after 3906 usecs
calling lp3944_module_init+0x0/0x11 @ 1
i2c-core: driver [lp3944] registered
initcall lp3944_module_init+0x0/0x11 returned 0 after 3906 usecs
calling pca955x_leds_init+0x0/0x11 @ 1
i2c-core: driver [leds-pca955x] registered
initcall pca955x_leds_init+0x0/0x11 returned 0 after 3906 usecs
calling lt3593_led_init+0x0/0xf @ 1
initcall lt3593_led_init+0x0/0xf returned 0 after 0 usecs
calling dac124s085_leds_init+0x0/0xf @ 1
initcall dac124s085_leds_init+0x0/0xf returned 0 after 0 usecs
calling timer_trig_init+0x0/0xf @ 1
initcall timer_trig_init+0x0/0xf returned 0 after 0 usecs
calling heartbeat_trig_init+0x0/0xf @ 1
initcall heartbeat_trig_init+0x0/0xf returned 0 after 0 usecs
calling gpio_trig_init+0x0/0xf @ 1
initcall gpio_trig_init+0x0/0xf returned 0 after 0 usecs
calling defon_trig_init+0x0/0xf @ 1
initcall defon_trig_init+0x0/0xf returned 0 after 0 usecs
calling ibft_init+0x0/0x561 @ 1
No iBFT detected.
initcall ibft_init+0x0/0x561 returned 0 after 3906 usecs
calling geode_aes_init+0x0/0x16 @ 1
initcall geode_aes_init+0x0/0x16 returned 0 after 0 usecs
calling hifn_init+0x0/0xaa @ 1
Driver for HIFN 795x crypto accelerator chip has been successfully registered.
initcall hifn_init+0x0/0xaa returned 0 after 3906 usecs
calling cs5535_mfgpt_init+0x0/0x180 @ 1
cs5535-clockevt: Could not allocate MFPGT timer
initcall cs5535_mfgpt_init+0x0/0x180 returned -19 after 3906 usecs
calling ioat_init_module+0x0/0x7a @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0x7a returned 0 after 3906 usecs
calling td_init+0x0/0xf @ 1
initcall td_init+0x0/0xf returned 0 after 0 usecs
calling vhost_net_init+0x0/0x40 @ 1
initcall vhost_net_init+0x0/0x40 returned 0 after 3906 usecs
calling alsa_hwdep_init+0x0/0x46 @ 1
initcall alsa_hwdep_init+0x0/0x46 returned 0 after 0 usecs
calling alsa_timer_init+0x0/0x196 @ 1
initcall alsa_timer_init+0x0/0x196 returned 0 after 0 usecs
calling rtctimer_init+0x0/0xff @ 1
initcall rtctimer_init+0x0/0xff returned 0 after 0 usecs
calling alsa_pcm_init+0x0/0x4d @ 1
initcall alsa_pcm_init+0x0/0x4d returned 0 after 0 usecs
calling snd_mem_init+0x0/0x2f @ 1
initcall snd_mem_init+0x0/0x2f returned 0 after 0 usecs
calling alsa_rawmidi_init+0x0/0xab @ 1
initcall alsa_rawmidi_init+0x0/0xab returned 0 after 0 usecs
calling alsa_mixer_oss_init+0x0/0x2d @ 1
initcall alsa_mixer_oss_init+0x0/0x2d returned 0 after 0 usecs
calling alsa_seq_init+0x0/0x37 @ 1
initcall alsa_seq_init+0x0/0x37 returned 0 after 0 usecs
calling alsa_seq_device_init+0x0/0x4e @ 1
initcall alsa_seq_device_init+0x0/0x4e returned 0 after 0 usecs
calling alsa_seq_midi_event_init+0x0/0x7 @ 1
initcall alsa_seq_midi_event_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_seq_oss_init+0x0/0x1b6 @ 1
initcall alsa_seq_oss_init+0x0/0x1b6 returned 0 after 0 usecs
calling alsa_seq_dummy_init+0x0/0xc0 @ 1
initcall alsa_seq_dummy_init+0x0/0xc0 returned 0 after 0 usecs
calling alsa_seq_midi_init+0x0/0x28 @ 1
initcall alsa_seq_midi_init+0x0/0x28 returned 0 after 0 usecs
calling alsa_seq_midi_emul_init+0x0/0x7 @ 1
initcall alsa_seq_midi_emul_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_virmidi_init+0x0/0x7 @ 1
initcall alsa_virmidi_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_akm4xxx_module_init+0x0/0x7 @ 1
initcall alsa_akm4xxx_module_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_cs8427_module_init+0x0/0x7 @ 1
initcall alsa_cs8427_module_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_i2c_init+0x0/0x7 @ 1
initcall alsa_i2c_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_opl3_init+0x0/0x7 @ 1
initcall alsa_opl3_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_opl3_seq_init+0x0/0x19 @ 1
initcall alsa_opl3_seq_init+0x0/0x19 returned 0 after 0 usecs
calling alsa_opl4_init+0x0/0x7 @ 1
initcall alsa_opl4_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_opl4_synth_init+0x0/0x19 @ 1
initcall alsa_opl4_synth_init+0x0/0x19 returned 0 after 0 usecs
calling alsa_mpu401_uart_init+0x0/0x7 @ 1
initcall alsa_mpu401_uart_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_vx_core_init+0x0/0x7 @ 1
initcall alsa_vx_core_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_card_adlib_init+0x0/0x14 @ 1
isa adlib.0: please specify port
initcall alsa_card_adlib_init+0x0/0x14 returned -19 after 3906 usecs
calling alsa_card_cmi8330_init+0x0/0x14 @ 1
ALSA sound/isa/cmi8330.c:622: cmi8330: specify wssport
initcall alsa_card_cmi8330_init+0x0/0x14 returned -19 after 7812 usecs
calling alsa_card_es18xx_init+0x0/0x14 @ 1
ALSA sound/isa/es18xx.c:1558: reset at 0x220 failed!!!
ALSA sound/isa/es18xx.c:1626: es18xx: [0x220] ESS chip not found
ALSA sound/isa/es18xx.c:1558: reset at 0x240 failed!!!
ALSA sound/isa/es18xx.c:1626: es18xx: [0x240] ESS chip not found
ALSA sound/isa/es18xx.c:1558: reset at 0x260 failed!!!
ALSA sound/isa/es18xx.c:1626: es18xx: [0x260] ESS chip not found
ALSA sound/isa/es18xx.c:1558: reset at 0x280 failed!!!
ALSA sound/isa/es18xx.c:1626: es18xx: [0x280] ESS chip not found
initcall alsa_card_es18xx_init+0x0/0x14 returned 0 after 46875 usecs
calling sscape_init+0x0/0x14 @ 1
initcall sscape_init+0x0/0x14 returned -19 after 3906 usecs
calling alsa_card_ad1848_init+0x0/0x14 @ 1
isa ad1848.0: please specify port
initcall alsa_card_ad1848_init+0x0/0x14 returned -19 after 3906 usecs
calling alsa_card_es1688_init+0x0/0x14 @ 1
ALSA sound/isa/es1688/es1688_lib.c:112: ess_reset at 0x220: failed!!!
ALSA sound/isa/es1688/es1688_lib.c:144: ESS: [0x220] reset failed... 0xff
ALSA sound/isa/es1688/es1688_lib.c:665: es1688: can't grab IRQ 5
ALSA sound/isa/es1688/es1688_lib.c:665: es1688: can't grab IRQ 5
es1688: probe of es1688.0 failed with error -16
initcall alsa_card_es1688_init+0x0/0x14 returned 0 after 23437 usecs
calling alsa_es1688_init+0x0/0x7 @ 1
initcall alsa_es1688_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_card_gusextreme_init+0x0/0x14 @ 1
ALSA sound/isa/es1688/es1688_lib.c:661: es1688: can't grab port 0x224
ALSA sound/isa/es1688/es1688_lib.c:661: es1688: can't grab port 0x244
ALSA sound/isa/es1688/es1688_lib.c:661: es1688: can't grab port 0x264
gusextreme: probe of gusextreme.0 failed with error -16
initcall alsa_card_gusextreme_init+0x0/0x14 returned 0 after 19531 usecs
calling alsa_gus_init+0x0/0x7 @ 1
initcall alsa_gus_init+0x0/0x7 returned 0 after 0 usecs
calling snd_msnd_init+0x0/0x14 @ 1
initcall snd_msnd_init+0x0/0x14 returned -19 after 0 usecs
calling snd_msnd_init+0x0/0x14 @ 1
initcall snd_msnd_init+0x0/0x14 returned -19 after 3906 usecs
calling alsa_card_opti9xx_init+0x0/0x14 @ 1
initcall alsa_card_opti9xx_init+0x0/0x14 returned 0 after 0 usecs
calling alsa_card_opti9xx_init+0x0/0x14 @ 1
Error: Driver 'opti92x' is already registered, aborting...
initcall alsa_card_opti9xx_init+0x0/0x14 returned -16 after 3906 usecs
initcall alsa_card_opti9xx_init+0x0/0x14 returned with error code -16
calling alsa_card_opti9xx_init+0x0/0x14 @ 1
initcall alsa_card_opti9xx_init+0x0/0x14 returned 0 after 0 usecs
calling alsa_card_miro_init+0x0/0x14 @ 1
ALSA sound/isa/opti9xx/miro.c:1440: unable to detect OPTi9xx chip
initcall alsa_card_miro_init+0x0/0x14 returned 0 after 3906 usecs
calling alsa_sb_common_init+0x0/0x7 @ 1
initcall alsa_sb_common_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_sb16_init+0x0/0x7 @ 1
initcall alsa_sb16_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_card_sb16_init+0x0/0x14 @ 1
ALSA sound/isa/sb/sb_common.c:255: sb: can't grab port 0x220
ALSA sound/isa/sb/sb_common.c:255: sb: can't grab port 0x240
ALSA sound/isa/sb/sb_common.c:255: sb: can't grab port 0x260
ALSA sound/isa/sb/sb_common.c:90: snd_sbdsp_reset [0x280] failed...
initcall alsa_card_sb16_init+0x0/0x14 returned 0 after 23437 usecs
calling alsa_sb_csp_init+0x0/0x7 @ 1
initcall alsa_sb_csp_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_card_wavefront_init+0x0/0x14 @ 1
ALSA sound/isa/wavefront/wavefront.c:555: specify CS4232 port
initcall alsa_card_wavefront_init+0x0/0x14 returned -19 after 7812 usecs
calling alsa_wss_init+0x0/0x7 @ 1
initcall alsa_wss_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_card_atiixp_init+0x0/0x16 @ 1
initcall alsa_card_atiixp_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_azf3328_init+0x0/0x16 @ 1
initcall alsa_card_azf3328_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_bt87x_init+0x0/0x29 @ 1
initcall alsa_card_bt87x_init+0x0/0x29 returned 0 after 0 usecs
calling alsa_card_cs4281_init+0x0/0x16 @ 1
initcall alsa_card_cs4281_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_cs5530_init+0x0/0x16 @ 1
initcall alsa_card_cs5530_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_ens137x_init+0x0/0x16 @ 1
initcall alsa_card_ens137x_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_es1968_init+0x0/0x16 @ 1
initcall alsa_card_es1968_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_intel8x0_init+0x0/0x16 @ 1
IOAPIC[0]: Set routing entry (2-3 -> 0x29 -> IRQ 27 Mode:1 Active:1)
Intel ICH 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 27
Intel ICH 0000:00:04.0: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 56000 usecs (2680 samples)
intel8x0: clocking to 48000
wm97xx-ts 0-0:ALC850: Device with vendor 414c is not a wm97xx
initcall alsa_card_intel8x0_init+0x0/0x16 returned 0 after 335937 usecs
calling alsa_card_intel8x0m_init+0x0/0x16 @ 1
initcall alsa_card_intel8x0m_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_m3_init+0x0/0x16 @ 1
initcall alsa_card_m3_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_rme32_init+0x0/0x16 @ 1
initcall alsa_card_rme32_init+0x0/0x16 returned 0 after 0 usecs
calling sis7019_init+0x0/0x16 @ 1
initcall sis7019_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_sonicvibes_init+0x0/0x16 @ 1
initcall alsa_card_sonicvibes_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_via82xx_init+0x0/0x16 @ 1
initcall alsa_card_via82xx_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_via82xx_init+0x0/0x16 @ 1
initcall alsa_card_via82xx_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_ac97_init+0x0/0x7 @ 1
initcall alsa_ac97_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_card_ali_init+0x0/0x16 @ 1
initcall alsa_card_ali_init+0x0/0x16 returned 0 after 0 usecs
calling snd_asihpi_init+0x0/0x1b @ 1
ASIHPI driver 4.03.25
initcall snd_asihpi_init+0x0/0x1b returned 0 after 0 usecs
calling alsa_card_vortex_init+0x0/0x16 @ 1
initcall alsa_card_vortex_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_vortex_init+0x0/0x16 @ 1
initcall alsa_card_vortex_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_vortex_init+0x0/0x16 @ 1
initcall alsa_card_vortex_init+0x0/0x16 returned 0 after 0 usecs
calling ct_card_init+0x0/0x16 @ 1
initcall ct_card_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_ca0106_init+0x0/0x16 @ 1
initcall alsa_card_ca0106_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_cs46xx_init+0x0/0x16 @ 1
initcall alsa_card_cs46xx_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_cs5535audio_init+0x0/0x16 @ 1
initcall alsa_card_cs5535audio_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 3906 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_echo_init+0x0/0x16 @ 1
initcall alsa_card_echo_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_emu10k1_init+0x0/0x16 @ 1
initcall alsa_card_emu10k1_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_emu10k1_synth_init+0x0/0x19 @ 1
initcall alsa_emu10k1_synth_init+0x0/0x19 returned 0 after 0 usecs
calling alsa_card_emu10k1x_init+0x0/0x16 @ 1
initcall alsa_card_emu10k1x_init+0x0/0x16 returned 0 after 0 usecs
calling patch_cmedia_init+0x0/0xf @ 1
initcall patch_cmedia_init+0x0/0xf returned 0 after 0 usecs
calling patch_sigmatel_init+0x0/0xf @ 1
initcall patch_sigmatel_init+0x0/0xf returned 0 after 0 usecs
calling patch_si3054_init+0x0/0xf @ 1
initcall patch_si3054_init+0x0/0xf returned 0 after 0 usecs
calling patch_atihdmi_init+0x0/0xf @ 1
initcall patch_atihdmi_init+0x0/0xf returned 0 after 0 usecs
calling patch_cirrus_init+0x0/0xf @ 1
initcall patch_cirrus_init+0x0/0xf returned 0 after 0 usecs
calling patch_conexant_init+0x0/0xf @ 1
initcall patch_conexant_init+0x0/0xf returned 0 after 0 usecs
calling patch_via_init+0x0/0xf @ 1
initcall patch_via_init+0x0/0xf returned 0 after 0 usecs
calling patch_nvhdmi_init+0x0/0xf @ 1
initcall patch_nvhdmi_init+0x0/0xf returned 0 after 0 usecs
calling alsa_card_azx_init+0x0/0x16 @ 1
initcall alsa_card_azx_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_ice1712_init+0x0/0x16 @ 1
initcall alsa_card_ice1712_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_ice1712_akm4xxx_module_init+0x0/0x7 @ 1
initcall alsa_ice1712_akm4xxx_module_init+0x0/0x7 returned 0 after 0 usecs
calling pcxhr_module_init+0x0/0x16 @ 1
initcall pcxhr_module_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_riptide_init+0x0/0x41 @ 1
initcall alsa_card_riptide_init+0x0/0x41 returned 0 after 0 usecs
calling alsa_card_hammerfall_init+0x0/0x16 @ 1
initcall alsa_card_hammerfall_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_hdsp_init+0x0/0x16 @ 1
initcall alsa_card_hdsp_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_hdspm_init+0x0/0x16 @ 1
initcall alsa_card_hdspm_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_trident_init+0x0/0x16 @ 1
initcall alsa_card_trident_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_card_vx222_init+0x0/0x16 @ 1
initcall alsa_card_vx222_init+0x0/0x16 returned 0 after 0 usecs
calling alsa_util_mem_init+0x0/0x7 @ 1
initcall alsa_util_mem_init+0x0/0x7 returned 0 after 0 usecs
calling alsa_emux_init+0x0/0x7 @ 1
initcall alsa_emux_init+0x0/0x7 returned 0 after 0 usecs
calling snd_us122l_module_init+0x0/0x16 @ 1
usbcore: registered new interface driver snd-usb-us122l
initcall snd_us122l_module_init+0x0/0x16 returned 0 after 3906 usecs
calling snd_module_init+0x0/0x16 @ 1
usbcore: registered new interface driver snd-usb-caiaq
initcall snd_module_init+0x0/0x16 returned 0 after 3906 usecs
calling alsa_sound_last_init+0x0/0x5a @ 1
ALSA device list:
#0: NVidia CK804 with ALC850 at irq 27
initcall alsa_sound_last_init+0x0/0x5a returned 0 after 3906 usecs
calling flow_cache_init_global+0x0/0x112 @ 1
initcall flow_cache_init_global+0x0/0x112 returned 0 after 3906 usecs
calling pg_init+0x0/0x28c @ 1
pktgen 2.73: Packet Generator for packet performance testing.
initcall pg_init+0x0/0x28c returned 0 after 3906 usecs
calling llc_init+0x0/0x1b @ 1
initcall llc_init+0x0/0x1b returned 0 after 0 usecs
calling snap_init+0x0/0x35 @ 1
initcall snap_init+0x0/0x35 returned 0 after 0 usecs
calling nfnetlink_init+0x0/0x26 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x26 returned 0 after 3906 usecs
calling nfnetlink_log_init+0x0/0xbe @ 1
initcall nfnetlink_log_init+0x0/0xbe returned 0 after 0 usecs
calling nf_conntrack_standalone_init+0x0/0xf @ 1
nf_conntrack version 0.5.0 (15884 buckets, 63536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
initcall nf_conntrack_standalone_init+0x0/0xf returned 0 after 15625 usecs
calling nf_ct_proto_gre_init+0x0/0x33 @ 1
initcall nf_ct_proto_gre_init+0x0/0x33 returned 0 after 0 usecs
calling nf_conntrack_proto_sctp_init+0x0/0x51 @ 1
initcall nf_conntrack_proto_sctp_init+0x0/0x51 returned 0 after 0 usecs
calling nf_conntrack_proto_udplite_init+0x0/0x37 @ 1
initcall nf_conntrack_proto_udplite_init+0x0/0x37 returned 0 after 0 usecs
calling ctnetlink_init+0x0/0xba @ 1
ctnetlink v0.93: registering with nfnetlink.
initcall ctnetlink_init+0x0/0xba returned 0 after 3906 usecs
calling nf_conntrack_amanda_init+0x0/0x9a @ 1
initcall nf_conntrack_amanda_init+0x0/0x9a returned 0 after 0 usecs
calling nf_conntrack_irc_init+0x0/0x189 @ 1
initcall nf_conntrack_irc_init+0x0/0x189 returned 0 after 0 usecs
calling nf_conntrack_netbios_ns_init+0x0/0x19 @ 1
initcall nf_conntrack_netbios_ns_init+0x0/0x19 returned 0 after 0 usecs
calling nf_conntrack_pptp_init+0x0/0x33 @ 1
initcall nf_conntrack_pptp_init+0x0/0x33 returned 0 after 0 usecs
calling nf_conntrack_sane_init+0x0/0x204 @ 1
initcall nf_conntrack_sane_init+0x0/0x204 returned 0 after 0 usecs
calling nf_conntrack_sip_init+0x0/0x212 @ 1
initcall nf_conntrack_sip_init+0x0/0x212 returned 0 after 0 usecs
calling nf_conntrack_tftp_init+0x0/0x179 @ 1
initcall nf_conntrack_tftp_init+0x0/0x179 returned 0 after 0 usecs
calling xt_init+0x0/0xb0 @ 1
initcall xt_init+0x0/0xb0 returned 0 after 0 usecs
calling tcpudp_mt_init+0x0/0x14 @ 1
initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 usecs
calling mark_mt_init+0x0/0x37 @ 1
initcall mark_mt_init+0x0/0x37 returned 0 after 0 usecs
calling connmark_mt_init+0x0/0x37 @ 1
initcall connmark_mt_init+0x0/0x37 returned 0 after 0 usecs
calling classify_tg_init+0x0/0xf @ 1
initcall classify_tg_init+0x0/0xf returned 0 after 0 usecs
calling connsecmark_tg_init+0x0/0xf @ 1
initcall connsecmark_tg_init+0x0/0xf returned 0 after 0 usecs
calling led_tg_init+0x0/0xf @ 1
initcall led_tg_init+0x0/0xf returned 0 after 0 usecs
calling nflog_tg_init+0x0/0xf @ 1
initcall nflog_tg_init+0x0/0xf returned 0 after 0 usecs
calling nfqueue_tg_init+0x0/0x14 @ 1
initcall nfqueue_tg_init+0x0/0x14 returned 0 after 0 usecs
calling secmark_tg_init+0x0/0xf @ 1
initcall secmark_tg_init+0x0/0xf returned 0 after 0 usecs
calling tee_tg_init+0x0/0x14 @ 1
initcall tee_tg_init+0x0/0x14 returned 0 after 0 usecs
calling xt_cluster_mt_init+0x0/0xf @ 1
initcall xt_cluster_mt_init+0x0/0xf returned 0 after 0 usecs
calling comment_mt_init+0x0/0xf @ 1
initcall comment_mt_init+0x0/0xf returned 0 after 0 usecs
calling connbytes_mt_init+0x0/0xf @ 1
initcall connbytes_mt_init+0x0/0xf returned 0 after 0 usecs
calling conntrack_mt_init+0x0/0x14 @ 1
initcall conntrack_mt_init+0x0/0x14 returned 0 after 0 usecs
calling dccp_mt_init+0x0/0x92 @ 1
initcall dccp_mt_init+0x0/0x92 returned 0 after 0 usecs
calling dscp_mt_init+0x0/0x14 @ 1
initcall dscp_mt_init+0x0/0x14 returned 0 after 0 usecs
calling esp_mt_init+0x0/0x14 @ 1
initcall esp_mt_init+0x0/0x14 returned 0 after 0 usecs
calling hashlimit_mt_init+0x0/0x88 @ 1
initcall hashlimit_mt_init+0x0/0x88 returned 0 after 0 usecs
calling hl_mt_init+0x0/0x14 @ 1
initcall hl_mt_init+0x0/0x14 returned 0 after 0 usecs
calling limit_mt_init+0x0/0xf @ 1
initcall limit_mt_init+0x0/0xf returned 0 after 0 usecs
calling mac_mt_init+0x0/0xf @ 1
initcall mac_mt_init+0x0/0xf returned 0 after 0 usecs
calling owner_mt_init+0x0/0xf @ 1
initcall owner_mt_init+0x0/0xf returned 0 after 0 usecs
calling pkttype_mt_init+0x0/0xf @ 1
initcall pkttype_mt_init+0x0/0xf returned 0 after 0 usecs
calling policy_mt_init+0x0/0x14 @ 1
initcall policy_mt_init+0x0/0x14 returned 0 after 0 usecs
calling state_mt_init+0x0/0xf @ 1
initcall state_mt_init+0x0/0xf returned 0 after 0 usecs
calling statistic_mt_init+0x0/0xf @ 1
initcall statistic_mt_init+0x0/0xf returned 0 after 0 usecs
calling string_mt_init+0x0/0xf @ 1
initcall string_mt_init+0x0/0xf returned 0 after 0 usecs
calling tcpmss_mt_init+0x0/0x14 @ 1
initcall tcpmss_mt_init+0x0/0x14 returned 0 after 0 usecs
calling time_mt_init+0x0/0x5c @ 1
xt_time: kernel timezone is -0000
initcall time_mt_init+0x0/0x5c returned 0 after 3906 usecs
calling ip_vs_init+0x0/0xac @ 1
IPVS: Registered protocols (TCP, SCTP, AH)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
initcall ip_vs_init+0x0/0xac returned 0 after 11718 usecs
calling ip_vs_wrr_init+0x0/0xf @ 1
IPVS: [wrr] scheduler registered.
initcall ip_vs_wrr_init+0x0/0xf returned 0 after 3906 usecs
calling ip_vs_lc_init+0x0/0xf @ 1
IPVS: [lc] scheduler registered.
initcall ip_vs_lc_init+0x0/0xf returned 0 after 0 usecs
calling ip_vs_wlc_init+0x0/0xf @ 1
IPVS: [wlc] scheduler registered.
initcall ip_vs_wlc_init+0x0/0xf returned 0 after 0 usecs
calling ip_vs_lblc_init+0x0/0x37 @ 1
IPVS: [lblc] scheduler registered.
initcall ip_vs_lblc_init+0x0/0x37 returned 0 after 3906 usecs
calling ip_vs_lblcr_init+0x0/0x37 @ 1
IPVS: [lblcr] scheduler registered.
initcall ip_vs_lblcr_init+0x0/0x37 returned 0 after 3906 usecs
calling ip_vs_dh_init+0x0/0xf @ 1
IPVS: [dh] scheduler registered.
initcall ip_vs_dh_init+0x0/0xf returned 0 after 3906 usecs
calling ip_vs_sh_init+0x0/0xf @ 1
IPVS: [sh] scheduler registered.
initcall ip_vs_sh_init+0x0/0xf returned 0 after 3906 usecs
calling ip_vs_nq_init+0x0/0xf @ 1
IPVS: [nq] scheduler registered.
initcall ip_vs_nq_init+0x0/0xf returned 0 after 3906 usecs
calling sysctl_ipv4_init+0x0/0x71 @ 1
initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 0 usecs
calling ipip_init+0x0/0x54 @ 1
IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x54 returned 0 after 3906 usecs
calling init_syncookies+0x0/0x16 @ 1
initcall init_syncookies+0x0/0x16 returned 0 after 0 usecs
calling esp4_init+0x0/0x65 @ 1
initcall esp4_init+0x0/0x65 returned 0 after 0 usecs
calling ipcomp4_init+0x0/0x65 @ 1
initcall ipcomp4_init+0x0/0x65 returned 0 after 0 usecs
calling ipip_init+0x0/0xa9 @ 1
initcall ipip_init+0x0/0xa9 returned 0 after 0 usecs
calling xfrm4_beet_init+0x0/0x14 @ 1
initcall xfrm4_beet_init+0x0/0x14 returned 0 after 0 usecs
calling tunnel4_init+0x0/0x65 @ 1
initcall tunnel4_init+0x0/0x65 returned 0 after 0 usecs
calling ipv4_netfilter_init+0x0/0x20 @ 1
initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
calling nf_conntrack_l3proto_ipv4_init+0x0/0x106 @ 1
initcall nf_conntrack_l3proto_ipv4_init+0x0/0x106 returned 0 after 0 usecs
calling nf_defrag_init+0x0/0x14 @ 1
initcall nf_defrag_init+0x0/0x14 returned 0 after 0 usecs
calling arp_tables_init+0x0/0x6b @ 1
arp_tables: (C) 2002 David S. Miller
initcall arp_tables_init+0x0/0x6b returned 0 after 0 usecs
calling arpt_mangle_init+0x0/0xf @ 1
initcall arpt_mangle_init+0x0/0xf returned 0 after 0 usecs
calling arptable_filter_init+0x0/0x40 @ 1
initcall arptable_filter_init+0x0/0x40 returned 0 after 0 usecs
calling inet_diag_init+0x0/0xb5 @ 1
initcall inet_diag_init+0x0/0xb5 returned 0 after 0 usecs
calling tcp_diag_init+0x0/0xf @ 1
initcall tcp_diag_init+0x0/0xf returned 0 after 0 usecs
calling cubictcp_register+0x0/0x72 @ 1
TCP cubic registered
initcall cubictcp_register+0x0/0x72 returned 0 after 3906 usecs
calling hstcp_register+0x0/0xf @ 1
TCP highspeed registered
initcall hstcp_register+0x0/0xf returned 0 after 3906 usecs
calling hybla_register+0x0/0xf @ 1
TCP hybla registered
initcall hybla_register+0x0/0xf returned 0 after 0 usecs
calling htcp_register+0x0/0xf @ 1
TCP htcp registered
initcall htcp_register+0x0/0xf returned 0 after 3906 usecs
calling tcp_vegas_register+0x0/0x11 @ 1
TCP vegas registered
initcall tcp_vegas_register+0x0/0x11 returned 0 after 0 usecs
calling tcp_veno_register+0x0/0x11 @ 1
TCP veno registered
initcall tcp_veno_register+0x0/0x11 returned 0 after 0 usecs
calling tcp_lp_register+0x0/0xf @ 1
TCP lp registered
initcall tcp_lp_register+0x0/0xf returned 0 after 3906 usecs
calling tcp_yeah_register+0x0/0x11 @ 1
TCP yeah registered
initcall tcp_yeah_register+0x0/0x11 returned 0 after 0 usecs
calling tcp_illinois_register+0x0/0xf @ 1
TCP illinois registered
initcall tcp_illinois_register+0x0/0xf returned 0 after 0 usecs
calling inet6_init+0x0/0x282 @ 1
NET: Registered protocol family 10
initcall inet6_init+0x0/0x282 returned 0 after 7812 usecs
calling ah6_init+0x0/0x65 @ 1
initcall ah6_init+0x0/0x65 returned 0 after 0 usecs
calling ipcomp6_init+0x0/0x65 @ 1
initcall ipcomp6_init+0x0/0x65 returned 0 after 0 usecs
calling xfrm6_tunnel_init+0x0/0xc5 @ 1
initcall xfrm6_tunnel_init+0x0/0xc5 returned 0 after 0 usecs
calling tunnel6_init+0x0/0x65 @ 1
initcall tunnel6_init+0x0/0x65 returned 0 after 0 usecs
calling xfrm6_transport_init+0x0/0x14 @ 1
initcall xfrm6_transport_init+0x0/0x14 returned 0 after 0 usecs
calling xfrm6_mode_tunnel_init+0x0/0x14 @ 1
initcall xfrm6_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs
calling xfrm6_ro_init+0x0/0x14 @ 1
initcall xfrm6_ro_init+0x0/0x14 returned 0 after 0 usecs
calling xfrm6_beet_init+0x0/0x14 @ 1
initcall xfrm6_beet_init+0x0/0x14 returned 0 after 0 usecs
calling sit_init+0x0/0x54 @ 1
IPv6 over IPv4 tunneling driver
initcall sit_init+0x0/0x54 returned 0 after 3906 usecs
calling ip6_tunnel_init+0x0/0x7e @ 1
initcall ip6_tunnel_init+0x0/0x7e returned 0 after 0 usecs
calling packet_init+0x0/0x39 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x39 returned 0 after 3906 usecs
calling br_init+0x0/0xb7 @ 1
Bridge firewalling registered
initcall br_init+0x0/0xb7 returned 0 after 0 usecs
calling dsa_init_module+0x0/0x11 @ 1
initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs
calling edsa_init_module+0x0/0x11 @ 1
initcall edsa_init_module+0x0/0x11 returned 0 after 0 usecs
calling trailer_init_module+0x0/0x11 @ 1
initcall trailer_init_module+0x0/0x11 returned 0 after 0 usecs
calling mv88e6060_init+0x0/0x11 @ 1
initcall mv88e6060_init+0x0/0x11 returned 0 after 0 usecs
calling mv88e6123_61_65_init+0x0/0x11 @ 1
initcall mv88e6123_61_65_init+0x0/0x11 returned 0 after 0 usecs
calling mv88e6131_init+0x0/0x11 @ 1
initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs
calling dsa_init_module+0x0/0xf @ 1
initcall dsa_init_module+0x0/0xf returned 0 after 0 usecs
calling ipx_init+0x0/0xd8 @ 1
NET: Registered protocol family 4
initcall ipx_init+0x0/0xd8 returned 0 after 0 usecs
calling atalk_init+0x0/0x7a @ 1
NET: Registered protocol family 5
initcall atalk_init+0x0/0x7a returned 0 after 3906 usecs
calling x25_init+0x0/0x85 @ 1
NET: Registered protocol family 9
X.25 for Linux Version 0.2
initcall x25_init+0x0/0x85 returned 0 after 3906 usecs
calling can_init+0x0/0xcd @ 1
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
initcall can_init+0x0/0xcd returned 0 after 3906 usecs
calling raw_module_init+0x0/0x35 @ 1
can: raw protocol (rev 20090105)
initcall raw_module_init+0x0/0x35 returned 0 after 3906 usecs
calling init_rpcsec_gss+0x0/0x3f @ 1
initcall init_rpcsec_gss+0x0/0x3f returned 0 after 0 usecs
calling init_kerberos_module+0x0/0x29 @ 1
initcall init_kerberos_module+0x0/0x29 returned 0 after 0 usecs
calling init_spkm3_module+0x0/0x29 @ 1
initcall init_spkm3_module+0x0/0x29 returned 0 after 0 usecs
calling af_rxrpc_init+0x0/0x187 @ 1
NET: Registered protocol family 33
initcall af_rxrpc_init+0x0/0x187 returned 0 after 3906 usecs
calling rxkad_init+0x0/0x5d @ 1
RxRPC: Registered security type 2 'rxkad'
initcall rxkad_init+0x0/0x5d returned 0 after 3906 usecs
calling atm_clip_init+0x0/0xa6 @ 1
initcall atm_clip_init+0x0/0xa6 returned 0 after 0 usecs
calling br2684_init+0x0/0x40 @ 1
initcall br2684_init+0x0/0x40 returned 0 after 0 usecs
calling lane_module_init+0x0/0x6b @ 1
lec:lane_module_init: lec.c: Jun 30 2010 02:07:39 initialized
initcall lane_module_init+0x0/0x6b returned 0 after 3906 usecs
calling atm_mpoa_init+0x0/0x45 @ 1
mpoa:atm_mpoa_init: mpc.c: Jun 30 2010 02:07:35 initialized
initcall atm_mpoa_init+0x0/0x45 returned 0 after 3906 usecs
calling pppoatm_init+0x0/0x11 @ 1
initcall pppoatm_init+0x0/0x11 returned 0 after 0 usecs
calling decnet_init+0x0/0x80 @ 1
NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
DECnet: Routing cache hash table of 1024 buckets, 4Kbytes
NET: Registered protocol family 12
initcall decnet_init+0x0/0x80 returned 0 after 11718 usecs
calling dn_rtmsg_init+0x0/0x70 @ 1
initcall dn_rtmsg_init+0x0/0x70 returned 0 after 0 usecs
calling phonet_init+0x0/0x73 @ 1
NET: Registered protocol family 35
initcall phonet_init+0x0/0x73 returned 0 after 3906 usecs
calling pep_register+0x0/0x14 @ 1
initcall pep_register+0x0/0x14 returned 0 after 0 usecs
calling sctp_init+0x0/0x6ff @ 1
SCTP: Hash tables configured (established 65536 bind 65536)
sctp_init_sock(sk: f6178000)
initcall sctp_init+0x0/0x6ff returned 0 after 11718 usecs
calling lib80211_init+0x0/0x1e @ 1
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
initcall lib80211_init+0x0/0x1e returned 0 after 7812 usecs
calling lib80211_crypto_wep_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'WEP'
initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 3906 usecs
calling lib80211_crypto_ccmp_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'CCMP'
initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 3906 usecs
calling lib80211_crypto_tkip_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'TKIP'
initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 3906 usecs
calling tipc_init+0x0/0xc5 @ 1
TIPC: Activated (version 2.0.0 compiled Jun 30 2010 02:08:06)
NET: Registered protocol family 30
TIPC: Started in single node mode
initcall tipc_init+0x0/0xc5 returned 0 after 11718 usecs
calling caif_device_init+0x0/0x71 @ 1
initcall caif_device_init+0x0/0x71 returned 0 after 0 usecs
calling chnl_init_module+0x0/0xf @ 1
initcall chnl_init_module+0x0/0xf returned 0 after 0 usecs
calling caif_sktinit_module+0x0/0x144 @ 1
NET: Registered protocol family 37
initcall caif_sktinit_module+0x0/0x144 returned 0 after 3906 usecs
calling dcbnl_init+0x0/0x3a @ 1
initcall dcbnl_init+0x0/0x3a returned 0 after 0 usecs
calling wimax_subsys_init+0x0/0x277 @ 1
initcall wimax_subsys_init+0x0/0x277 returned 0 after 0 usecs
calling mcheck_debugfs_init+0x0/0x3e @ 1
initcall mcheck_debugfs_init+0x0/0x3e returned 0 after 0 usecs
calling severities_debugfs_init+0x0/0x3e @ 1
initcall severities_debugfs_init+0x0/0x3e returned 0 after 0 usecs
calling powernow_init+0x0/0xdb @ 1
initcall powernow_init+0x0/0xdb returned -19 after 0 usecs
calling centrino_init+0x0/0x1d @ 1
initcall centrino_init+0x0/0x1d returned -19 after 0 usecs
calling update_mp_table+0x0/0x5c2 @ 1
initcall update_mp_table+0x0/0x5c2 returned 0 after 0 usecs
calling lapic_insert_resource+0x0/0x35 @ 1
initcall lapic_insert_resource+0x0/0x35 returned 0 after 0 usecs
calling print_ipi_mode+0x0/0x2d @ 1
Using IPI Shortcut mode
initcall print_ipi_mode+0x0/0x2d returned 0 after 3906 usecs
calling io_apic_bug_finalize+0x0/0x1a @ 1
initcall io_apic_bug_finalize+0x0/0x1a returned 0 after 0 usecs
calling check_early_ioremap_leak+0x0/0x69 @ 1
initcall check_early_ioremap_leak+0x0/0x69 returned 0 after 0 usecs
calling pat_memtype_list_init+0x0/0x37 @ 1
initcall pat_memtype_list_init+0x0/0x37 returned 0 after 0 usecs
calling init_oops_id+0x0/0x50 @ 1
initcall init_oops_id+0x0/0x50 returned 0 after 0 usecs
calling disable_boot_consoles+0x0/0x43 @ 1
initcall disable_boot_consoles+0x0/0x43 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0xbf @ 1
initcall pm_qos_power_init+0x0/0xbf returned 0 after 0 usecs
calling clear_boot_tracer+0x0/0x2d @ 1
initcall clear_boot_tracer+0x0/0x2d returned 0 after 0 usecs
calling afs_init+0x0/0x1d8 @ 1
kAFS: Red Hat AFS client v0.1 registering.
FS-Cache: Netfs 'afs' registered for caching
initcall afs_init+0x0/0x1d8 returned 0 after 7812 usecs
calling init_ima+0x0/0x14 @ 1
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
IMA: No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x14 returned 0 after 7812 usecs
calling random32_reseed+0x0/0x4f @ 1
initcall random32_reseed+0x0/0x4f returned 0 after 0 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 0 usecs
calling pci_sysfs_init+0x0/0x44 @ 1
initcall pci_sysfs_init+0x0/0x44 returned 0 after 0 usecs
calling seqgen_init+0x0/0xe @ 1
initcall seqgen_init+0x0/0xe returned 0 after 0 usecs
calling hd_init+0x0/0x2c9 @ 1
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
initcall hd_init+0x0/0x2c9 returned -1 after 3906 usecs
initcall hd_init+0x0/0x2c9 returned with error code -1
calling scsi_complete_async_scans+0x0/0x130 @ 1
initcall scsi_complete_async_scans+0x0/0x130 returned 0 after 0 usecs
calling edd_init+0x0/0x314 @ 1
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
initcall edd_init+0x0/0x314 returned -19 after 7812 usecs
calling memmap_init+0x0/0x30 @ 1
initcall memmap_init+0x0/0x30 returned 0 after 0 usecs
calling dmatest_init+0x0/0x187 @ 1
initcall dmatest_init+0x0/0x187 returned 0 after 0 usecs
calling pci_mmcfg_late_insert_resources+0x0/0x59 @ 1
initcall pci_mmcfg_late_insert_resources+0x0/0x59 returned 1 after 0 usecs
initcall pci_mmcfg_late_insert_resources+0x0/0x59 returned with error code 1
calling init_net_drop_monitor+0x0/0xfc @ 1
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0xfc returned 0 after 3906 usecs
calling tcp_congestion_default+0x0/0xf @ 1
initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
calling ip_auto_config+0x0/0xe18 @ 1
initcall ip_auto_config+0x0/0xe18 returned 0 after 0 usecs
calling initialize_hashrnd+0x0/0x16 @ 1
initcall initialize_hashrnd+0x0/0x16 returned 0 after 0 usecs
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
evbug.c: Connected device: input1 (ImPS/2 Generic Wheel Mouse at isa0060/serio1/input0)
async_waiting @ 1
async_continuing @ 1 after 0 usec
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
EXT3-fs: barriers not enabled
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#1]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d4a6>] EFLAGS: 00010002 CPU: 0
EIP is at print_context_stack+0x86/0x130
EAX: 00000000 EBX: c229cd80 ECX: 00000001 EDX: c229c000
ESI: 00000000 EDI: c1e74d9c EBP: c229cd4c ESP: c229cd28
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c10349df c229dffc c229cd94 ffffe000 c229c000 c229cd94 c229cd68 c1e74d9c
<0> c229c000 c229cd7c c102c0ff c1e74d9c f72aa150 00000000 c229cd6c c229cd6c
<0> c2cd6fa0 00000000 f72aa150 f72aa120 f72aa174 c229cd94 c10349df c229cd7c
Call Trace:
[<c10349df>] ? save_stack_trace+0x2f/0x50
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#2]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d4a6>] EFLAGS: 00010082 CPU: 0
EIP is at print_context_stack+0x86/0x130
EAX: 00000000 EBX: c229cd28 ECX: fffd24f0 EDX: c229c000
ESI: 00000000 EDI: c1e749b4 EBP: c229cb1c ESP: c229caf8
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c10349df c229dffc c229cb4c ffffe000 c229c000 c229cb4c c229cd28 c1e749b4
<0> c229c000 c229cb4c c102c0ff c1e749b4 c20b6d58 00000000 c229cb3c c229cb3c
<0> 00000018 00000000 00000000 c20b6d58 00000018 c229cb70 c102d2c7 c229cb4c
Call Trace:
[<c10349df>] ? save_stack_trace+0x2f/0x50
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#3]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d4a6>] EFLAGS: 00010086 CPU: 0
EIP is at print_context_stack+0x86/0x130
EAX: 00000000 EBX: c229caf8 ECX: fffd214f EDX: c229c000
ESI: 00000000 EDI: c1e749b4 EBP: c229c8ec ESP: c229c8c8
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c10349df c229dffc c229c91c ffffe000 c229c000 c229c91c c229caf8 c1e749b4
<0> c229c000 c229c91c c102c0ff c1e749b4 c20b6d58 00000000 c229c90c c229c90c
<0> 00000018 00000000 00000000 c20b6d58 00000018 c229c940 c102d2c7 c229c91c
Call Trace:
[<c10349df>] ? save_stack_trace+0x2f/0x50
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#4]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d4a6>] EFLAGS: 00010086 CPU: 0
EIP is at print_context_stack+0x86/0x130
EAX: 00000000 EBX: c229c8c8 ECX: fffd1dae EDX: c229c000
ESI: 00000000 EDI: c1e749b4 EBP: c229c6bc ESP: c229c698
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c10349df c229dffc c229c6ec ffffe000 c229c000 c229c6ec c229c8c8 c1e749b4
<0> c229c000 c229c6ec c102c0ff c1e749b4 c20b6d58 00000000 c229c6dc c229c6dc
<0> 00000018 00000000 00000000 c20b6d58 00000018 c229c710 c102d2c7 c229c6ec
Call Trace:
[<c10349df>] ? save_stack_trace+0x2f/0x50
BUG: unable to handle kernel NULL pointer dereference at 0000039c
IP: [<c102d4a6>] print_context_stack+0x86/0x130
*pde = 00000000
Oops: 0000 [#5]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d4a6>] EFLAGS: 00010086 CPU: 0
EIP is at print_context_stack+0x86/0x130
EAX: 00000000 EBX: c229c698 ECX: fffd1a0d EDX: c229c000
ESI: 00000000 EDI: c1e749b4 EBP: c229c48c ESP: c229c468
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c10349df c229dffc c229c4bc ffffe000 c229c000 c229c4bc c229c698 c1e749b4
<0> c229c000 c229c4bc c102c0ff c1e749b4 c20b6d58 00000000 c229c4ac c229c4ac
<0> 00000018 00000000 00000000 c20b6d58 00000018 c229c4e0 c102d2c7 c229c4bc
Call Trace:
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
BUG: unable to handle kernel paging request at 0000fff8
IP: [<c102d475>] print_context_stack+0x55/0x130
*pde = 00000000
Oops: 0000 [#6]
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3-tip-01298-g53cd4ef-dirty #13969 A8N-E/System Product Name
EIP: 0060:[<c102d475>] EFLAGS: 00010097 CPU: 0
EIP is at print_context_stack+0x55/0x130
EAX: ffffe000 EBX: 0000fff8 ECX: c229c28c EDX: 0000fff8
ESI: 00000000 EDI: 0000e000 EBP: c229c25c ESP: c229c238
DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c229c000 task=c22a1180 task.ti=c2296000)
Stack:
c229c248 0000fffc c229c28c ffffe000 0000e000 c229c28c 0000fff8 c1e749b4
<0> 0000e000 c229c28c c102c0ff c1e749b4 c20b6d58 00000000 c229c27c c229c27c
<0> 00000018 00000000 00000000 c20b6d58 00000018 c229c2b0 c102d2c7 c229c28c
Call Trace:
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] show_trace_log_lvl+0x47/0x50
[<c102c1b7>] show_stack_log_lvl+0x57/0xf0
[<c102c308>] show_registers+0xb8/0x1d0
[<c102cf41>] __die+0x91/0x100
[<c104c712>] no_context+0x92/0x150
[<c104c867>] __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] bad_area_nosemaphore+0x17/0x20
[<c104cf24>] do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d475>] ? print_context_stack+0x55/0x130
[<c102c0ff>] dump_trace+0xaf/0x110
[<c102d2c7>] show_trace_log_lvl+0x47/0x50
[<c102c1b7>] show_stack_log_lvl+0x57/0xf0
[<c102c308>] show_registers+0xb8/0x1d0
[<c102cf41>] __die+0x91/0x100
[<c104c712>] no_context+0x92/0x150
[<c104c867>] __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] bad_area_nosemaphore+0x17/0x20
[<c104cf24>] do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] dump_trace+0xaf/0x110
[<c102d2c7>] show_trace_log_lvl+0x47/0x50
[<c102c1b7>] show_stack_log_lvl+0x57/0xf0
[<c102c308>] show_registers+0xb8/0x1d0
[<c102cf41>] __die+0x91/0x100
[<c104c712>] no_context+0x92/0x150
[<c104c867>] __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] bad_area_nosemaphore+0x17/0x20
[<c104cf24>] do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] dump_trace+0xaf/0x110
[<c102d2c7>] show_trace_log_lvl+0x47/0x50
[<c102c1b7>] show_stack_log_lvl+0x57/0xf0
[<c102c308>] show_registers+0xb8/0x1d0
[<c102cf41>] __die+0x91/0x100
[<c104c712>] no_context+0x92/0x150
[<c104c867>] __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] bad_area_nosemaphore+0x17/0x20
[<c104cf24>] do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] dump_trace+0xaf/0x110
[<c102d2c7>] show_trace_log_lvl+0x47/0x50
[<c102c1b7>] show_stack_log_lvl+0x57/0xf0
[<c102c308>] show_registers+0xb8/0x1d0
[<c102cf41>] __die+0x91/0x100
[<c104c712>] no_context+0x92/0x150
[<c104c867>] __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] bad_area_nosemaphore+0x17/0x20
[<c104cf24>] do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] dump_trace+0xaf/0x110
[<c102d2c7>] show_trace_log_lvl+0x47/0x50
[<c102c1b7>] show_stack_log_lvl+0x57/0xf0
[<c102c308>] show_registers+0xb8/0x1d0
[<c102cf41>] __die+0x91/0x100
[<c104c712>] no_context+0x92/0x150
[<c104c867>] __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] bad_area_nosemaphore+0x17/0x20
[<c104cf24>] do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] dump_trace+0xaf/0x110
[<c10349df>] save_stack_trace+0x2f/0x50
[<c13d4119>] dma_entry_alloc+0x69/0xc0
[<c13d5354>] debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ata_qc_issue+0x14d/0x300
[<c165bb1b>] ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] __blk_run_queue+0x3a/0x70
[<c13a989f>] blk_run_queue+0x1f/0x40
[<c15fa798>] scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] scsi_next_command+0x2d/0x40
[<c15faf08>] scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] scsi_finish_command+0xaa/0xc0
[<c15fb317>] scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] blk_done_softirq+0x6a/0x80
[<c106471c>] __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d475>] ? print_context_stack+0x55/0x130
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d475>] ? print_context_stack+0x55/0x130
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d475>] ? print_context_stack+0x55/0x130
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d475>] ? print_context_stack+0x55/0x130
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d475>] ? print_context_stack+0x55/0x130
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c105fe0b>] ? release_console_sem+0x20b/0x220
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c18e1690>] ? write_msg+0x0/0x120
[<c105f193>] ? __call_console_drivers+0x43/0x50
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c102d4a6>] ? print_context_stack+0x86/0x130
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c102c0ff>] ? dump_trace+0xaf/0x110
[<c10349df>] ? save_stack_trace+0x2f/0x50
[<c13d4119>] ? dma_entry_alloc+0x69/0xc0
[<c13d5354>] ? debug_dma_map_sg+0x94/0x150
[<c165d528>] ? ata_scsi_rw_xlat+0x1d8/0x290
[<c1655e4d>] ? ata_qc_issue+0x14d/0x300
[<c165bb1b>] ? ata_scsi_translate+0x7b/0x150
[<c10ecaa7>] ? slab_pad_check+0x37/0x1a0
[<c15f3480>] ? scsi_done+0x0/0x40
[<c15f3480>] ? scsi_done+0x0/0x40
[<c165f004>] ? ata_scsi_queuecmd+0x84/0x260
[<c165d350>] ? ata_scsi_rw_xlat+0x0/0x290
[<c15f45c7>] ? scsi_dispatch_cmd+0xc7/0x250
[<c15f991e>] ? scsi_request_fn+0x39e/0x480
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c13a7e7a>] ? __blk_run_queue+0x3a/0x70
[<c13a989f>] ? blk_run_queue+0x1f/0x40
[<c15fa798>] ? scsi_run_queue+0xb8/0x2d0
[<c1597d14>] ? put_device+0x14/0x20
[<c15f411d>] ? __scsi_put_command+0x4d/0x80
[<c15faafd>] ? scsi_next_command+0x2d/0x40
[<c15faf08>] ? scsi_io_completion+0x2b8/0x5b0
[<c10ee9c3>] ? __slab_free+0x1c3/0x240
[<c15f346a>] ? scsi_finish_command+0xaa/0xc0
[<c15fb317>] ? scsi_softirq_done+0xf7/0x120
[<c109c377>] ? __rcu_process_callbacks+0x47/0x470
[<c13adb5a>] ? blk_done_softirq+0x6a/0x80
[<c106471c>] ? __do_softirq+0x8c/0x1b0
[<c1064690>] ? __do_softirq+0x0/0x1b0
[<c102bfb4>] ? do_softirq+0x84/0xc0
<IRQ>
[<c102d2c7>] ? show_trace_log_lvl+0x47/0x50
[<c102c1b7>] ? show_stack_log_lvl+0x57/0xf0
[<c102c308>] ? show_registers+0xb8/0x1d0
[<c102cf41>] ? __die+0x91/0x100
[<c104c712>] ? no_context+0x92/0x150
[<c104c867>] ? __bad_area_nosemaphore+0x97/0x140
[<c13c4604>] ? __const_udelay+0x24/0x30
[<c158a2a5>] ? wait_for_xmitr+0x55/0xb0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104c927>] ? bad_area_nosemaphore+0x17/0x20
[<c104cf24>] ? do_page_fault+0x334/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c104cbf0>] ? do_page_fault+0x0/0x3f0
[<c1e6df53>] ? error_code+0x63/0x70
[-- Attachment #3: config-Wed_Jun_30_11_10_16_CEST_2010.bad --]
[-- Type: text/plain, Size: 70340 bytes --]
# 53cd4efe
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc3
# Wed Jun 30 11:10:16 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_BOOTPARAM_SUPPORT_NOT_WANTED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_BOOT_ALLOWED4=y
CONFIG_BROKEN_BOOT_ALLOWED3=y
CONFIG_BROKEN_BOOT_ALLOWED2=y
CONFIG_BROKEN_BOOT_DISALLOWED=y
CONFIG_BROKEN_BOOT_EUROPE=y
CONFIG_BROKEN_BOOT_TITAN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_LZO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_EXACT=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_CGROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_SLOW_WORK_DEBUG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP_SUPPORT is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_ELAN=y
CONFIG_X86_MRST=y
CONFIG_X86_RDC321X=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=4
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=4
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_APB_TIMER=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_ANCIENT_MCE=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_VM86=y
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_UP_WANTED_1=y
CONFIG_UP_WANTED_2=y
CONFIG_UP_WANTED=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_PM is not set
CONFIG_SFI=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_ELAN_CPUFREQ=y
CONFIG_SC520_CPUFREQ=y
CONFIG_X86_POWERNOW_K6=y
CONFIG_X86_POWERNOW_K7=y
CONFIG_X86_GX_SUSPMOD=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
CONFIG_X86_CPUFREQ_NFORCE2=y
CONFIG_X86_LONGRUN=y
CONFIG_X86_E_POWERSAVER=y
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
CONFIG_PCI_IOV=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_EISA=y
CONFIG_EISA_VLB_PRIMING=y
# CONFIG_EISA_PCI_EISA is not set
CONFIG_EISA_VIRTUAL_ROOT=y
# CONFIG_EISA_NAMES is not set
CONFIG_MCA=y
CONFIG_MCA_LEGACY=y
CONFIG_MCA_PROC_FS=y
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_OLPC_OPENFIRMWARE=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_COMPAQ=y
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
CONFIG_DEFAULT_HYBLA=y
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="hybla"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
CONFIG_NETFILTER_XT_TARGET_TEE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
# CONFIG_IP_VS_PROTO_UDP is not set
CONFIG_IP_VS_PROTO_AH_ESP=y
# CONFIG_IP_VS_PROTO_ESP is not set
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_SED is not set
CONFIG_IP_VS_NQ=y
#
# IPVS application helper
#
# CONFIG_IP_VS_FTP is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=y
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_NET_DSA_TAG_TRAILER=y
CONFIG_NET_DSA_MV88E6XXX=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
# CONFIG_LTPC is not set
# CONFIG_IPDDP is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
# CONFIG_AX25 is not set
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_SJA1000=y
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=y
# CONFIG_CAN_EMS_PCI is not set
CONFIG_CAN_KVASER_PCI=y
CONFIG_CAN_PLX_PCI=y
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_TKIP_DEBUG is not set
CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
# CONFIG_MAC80211_DRIVER_API_TRACER is not set
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_OSD=y
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=y
# CONFIG_VIRTIO_BLK is not set
CONFIG_BLK_DEV_HD=y
CONFIG_MISC_DEVICES=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_IBM_ASM=y
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
CONFIG_TIFM_CORE=y
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_CS5535_MFGPT=y
CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
CONFIG_CS5535_CLOCK_EVENT_SRC=y
CONFIG_HP_ILO=y
# CONFIG_ISL29003 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_DS1682 is not set
CONFIG_TI_DAC7512=y
# CONFIG_VMWARE_BALLOON is not set
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
CONFIG_IWMC3200TOP=y
CONFIG_IWMC3200TOP_DEBUG=y
CONFIG_IWMC3200TOP_DEBUGFS=y
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_SATA_INIC162X=y
CONFIG_SATA_SIL24=y
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
CONFIG_SATA_QSTOR=y
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIS=y
CONFIG_SATA_SVW=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
CONFIG_PATA_ARTOP=y
# CONFIG_PATA_ATIIXP is not set
CONFIG_PATA_ATP867X=y
CONFIG_PATA_CMD64X=y
CONFIG_PATA_CS5520=y
CONFIG_PATA_CS5530=y
CONFIG_PATA_CS5535=y
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
CONFIG_PATA_EFAR=y
CONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
CONFIG_PATA_HPT3X2N=y
CONFIG_PATA_HPT3X3=y
CONFIG_PATA_HPT3X3_DMA=y
CONFIG_PATA_IT8213=y
CONFIG_PATA_IT821X=y
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_NETCELL=y
CONFIG_PATA_NINJA32=y
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_PDC_OLD=y
CONFIG_PATA_RADISYS=y
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_TOSHIBA=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
CONFIG_PATA_CMD640_PCI=y
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=y
CONFIG_PATA_OPTI=y
CONFIG_PATA_QDI=y
CONFIG_PATA_RZ1000=y
CONFIG_PATA_WINBOND_VLB=y
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
CONFIG_PATA_LEGACY=y
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=y
# CONFIG_FIREWIRE_NET is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not set
# CONFIG_IEEE1394_SBP2 is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=y
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
CONFIG_MACVTAP=y
CONFIG_EQUALIZER=y
CONFIG_TUN=y
# CONFIG_VETH is not set
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
CONFIG_ARCNET_RAW=y
CONFIG_ARCNET_CAP=y
# CONFIG_ARCNET_COM90xx is not set
CONFIG_ARCNET_COM90xxIO=y
CONFIG_ARCNET_RIM_I=y
CONFIG_ARCNET_COM20020=y
CONFIG_ARCNET_COM20020_ISA=y
CONFIG_ARCNET_COM20020_PCI=y
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
CONFIG_MICREL_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
CONFIG_ELPLUS=y
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
CONFIG_3C515=y
CONFIG_ELMC=y
CONFIG_ELMC_II=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
CONFIG_LANCE=y
CONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRAMCA is not set
# CONFIG_ULTRA is not set
# CONFIG_ULTRA32 is not set
# CONFIG_SMC9194 is not set
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=y
# CONFIG_WINBOND_840 is not set
CONFIG_DM9102=y
# CONFIG_ULI526X is not set
CONFIG_AT1700=y
CONFIG_DEPCA=y
CONFIG_HP100=y
# CONFIG_NET_ISA is not set
CONFIG_NE2_MCA=y
CONFIG_IBMLANA=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
CONFIG_AMD8111_ETH=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_AC3200=y
CONFIG_KSZ884X_PCI=y
CONFIG_APRICOT=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_CS89x0=y
CONFIG_E100=y
# CONFIG_LNE390 is not set
CONFIG_FEALNX=y
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=y
CONFIG_NE3210=y
CONFIG_ES3210=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
CONFIG_8139_OLD_RX_RESET=y
# CONFIG_R6040 is not set
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
CONFIG_KS8842=y
# CONFIG_KS8851 is not set
CONFIG_KS8851_MLL=y
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=y
# CONFIG_NET_POCKET is not set
CONFIG_ATL2=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_IGB_DCA is not set
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=y
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
CONFIG_SIS190=y
CONFIG_SKGE=y
CONFIG_SKGE_DEBUG=y
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
# CONFIG_CNIC is not set
CONFIG_QLA3XXX=y
# CONFIG_ATL1 is not set
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
CONFIG_ATMEL=y
CONFIG_PCI_ATMEL=y
CONFIG_AT76C50X_USB=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_USB_NET_RNDIS_WLAN=y
CONFIG_RTL8180=y
CONFIG_RTL8187=y
CONFIG_RTL8187_LEDS=y
CONFIG_ADM8211=y
CONFIG_MAC80211_HWSIM=y
CONFIG_MWL8K=y
CONFIG_ATH_COMMON=y
CONFIG_ATH_DEBUG=y
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
CONFIG_ATH9K=y
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_HTC=y
CONFIG_ATH9K_HTC_DEBUGFS=y
# CONFIG_AR9170_USB is not set
# CONFIG_B43 is not set
CONFIG_B43LEGACY=y
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_PIO=y
# CONFIG_B43LEGACY_DMA_AND_PIO_MODE is not set
# CONFIG_B43LEGACY_DMA_MODE is not set
CONFIG_B43LEGACY_PIO_MODE=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=y
CONFIG_IPW2100=y
# CONFIG_IPW2100_MONITOR is not set
# CONFIG_IPW2100_DEBUG is not set
CONFIG_LIBIPW=y
CONFIG_LIBIPW_DEBUG=y
# CONFIG_IWLWIFI is not set
# CONFIG_IWM is not set
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_USB=y
CONFIG_LIBERTAS_SDIO=y
# CONFIG_LIBERTAS_SPI is not set
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
CONFIG_P54_COMMON=y
CONFIG_P54_USB=y
CONFIG_P54_PCI=y
# CONFIG_P54_SPI is not set
CONFIG_P54_LEDS=y
# CONFIG_ZD1211RW is not set
#
# WiMAX Wireless Broadband devices
#
CONFIG_WIMAX_I2400M=y
CONFIG_WIMAX_I2400M_SDIO=y
CONFIG_WIMAX_IWMC3200_SDIO=y
CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=y
# CONFIG_USB_NET_SMSC75XX is not set
CONFIG_USB_NET_SMSC95XX=y
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
# CONFIG_USB_AN2720 is not set
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_HSO=y
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
CONFIG_USB_IPHETH=y
CONFIG_USB_SIERRA_NET=y
CONFIG_WAN=y
CONFIG_LANMEDIA=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
CONFIG_WANXL=y
# CONFIG_PC300TOO is not set
CONFIG_N2=y
CONFIG_C101=y
CONFIG_FARSYNC=y
CONFIG_DLCI=y
CONFIG_DLCI_MAX=8
# CONFIG_SDLA is not set
# CONFIG_WAN_ROUTER_DRIVERS is not set
CONFIG_SBNI=y
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=y
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=y
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=y
CONFIG_ATM_ZATM=y
CONFIG_ATM_ZATM_DEBUG=y
CONFIG_ATM_NICSTAR=y
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
# CONFIG_ATM_IDT77252 is not set
CONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=y
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
CONFIG_FDDI=y
CONFIG_DEFXX=y
CONFIG_DEFXX_MMIO=y
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=y
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
CONFIG_PPPOATM=y
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=y
# CONFIG_SLIP_SMART is not set
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_VMXNET3 is not set
CONFIG_ISDN=y
# CONFIG_ISDN_I4L is not set
# CONFIG_ISDN_CAPI is not set
CONFIG_ISDN_DRV_GIGASET=y
CONFIG_GIGASET_DUMMYLL=y
# CONFIG_GIGASET_BASE is not set
CONFIG_GIGASET_M105=y
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
CONFIG_QT2160=y
CONFIG_KEYBOARD_LKKBD=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_SENTELIC=y
CONFIG_MOUSE_PS2_TOUCHKIT=y
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_APPLETOUCH=y
CONFIG_MOUSE_BCM5974=y
CONFIG_MOUSE_INPORT=y
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=y
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=y
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=y
CONFIG_JOYSTICK_INTERACT=y
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
# CONFIG_JOYSTICK_TWIDJOY is not set
CONFIG_JOYSTICK_ZHENHUA=y
# CONFIG_JOYSTICK_DB9 is not set
CONFIG_JOYSTICK_GAMECON=y
CONFIG_JOYSTICK_TURBOGRAFX=y
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_JOYSTICK_WALKERA0701=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
# CONFIG_TABLET_USB_AIPTEK is not set
CONFIG_TABLET_USB_GTCO=y
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
CONFIG_TOUCHSCREEN_AD7877=y
CONFIG_TOUCHSCREEN_AD7879_I2C=y
CONFIG_TOUCHSCREEN_AD7879=y
CONFIG_TOUCHSCREEN_DYNAPRO=y
CONFIG_TOUCHSCREEN_HAMPSHIRE=y
# CONFIG_TOUCHSCREEN_EETI is not set
CONFIG_TOUCHSCREEN_FUJITSU=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MCS5000=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=y
CONFIG_TOUCHSCREEN_HTCPEN=y
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_WM97XX=y
# CONFIG_TOUCHSCREEN_WM9705 is not set
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=y
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_USB_JASTEC=y
CONFIG_TOUCHSCREEN_USB_E2I=y
CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
CONFIG_TOUCHSCREEN_USB_ETT_TC5UH=y
CONFIG_TOUCHSCREEN_USB_NEXIO=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC2007=y
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_APANEL=y
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=y
CONFIG_INPUT_ATI_REMOTE2=y
CONFIG_INPUT_KEYSPAN_REMOTE=y
CONFIG_INPUT_POWERMATE=y
CONFIG_INPUT_YEALINK=y
CONFIG_INPUT_CM109=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF8574=y
CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_ISI is not set
CONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=y
CONFIG_STALDRV=y
CONFIG_STALLION=y
# CONFIG_ISTALLION is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=y
# CONFIG_SERIAL_8250_ACCENT is not set
CONFIG_SERIAL_8250_BOCA=y
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
CONFIG_SERIAL_8250_HUB6=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_MCA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_MAX3100=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_ALTERA_JTAGUART=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS=y
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
# CONFIG_IPMI_SI is not set
# CONFIG_IPMI_WATCHDOG is not set
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_SIS5595=y
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=y
CONFIG_I2C_OCORES=y
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
# CONFIG_I2C_TAOS_EVM is not set
CONFIG_I2C_TINY_USB=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_ELEKTOR=y
CONFIG_SCx200_ACB=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_XILINX=y
CONFIG_SPI_XILINX_PLTFM=y
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_TLE62X0=y
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO expanders:
#
CONFIG_GPIO_IT8761E=y
CONFIG_GPIO_SCH=y
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_ADP5588=y
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_LANGWELL=y
CONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
# CONFIG_GPIO_MCP23S08 is not set
CONFIG_GPIO_MC33880=y
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
# CONFIG_PDA_POWER is not set
CONFIG_TEST_POWER=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_WM97XX=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_MAX17040=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_MFD_SUPPORT is not set
CONFIG_MFD_CORE=y
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
CONFIG_IR_CORE=y
CONFIG_VIDEO_IR=y
CONFIG_RC_MAP=y
CONFIG_IR_NEC_DECODER=y
# CONFIG_IR_RC5_DECODER is not set
CONFIG_IR_RC6_DECODER=y
# CONFIG_IR_JVC_DECODER is not set
CONFIG_IR_SONY_DECODER=y
# CONFIG_IR_IMON is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_CAPTURE_DRIVERS is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=y
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_VIA is not set
CONFIG_AGP_EFFICEON=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
CONFIG_DRM_I810=y
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
# CONFIG_DRM_VIA is not set
CONFIG_DRM_SAVAGE=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_ARC=y
CONFIG_FB_IMSTT=y
CONFIG_FB_UVESA=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_HGA_ACCEL=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=y
CONFIG_FB_I810_GTF=y
CONFIG_FB_I810_I2C=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
# CONFIG_FB_MATROX_MAVEN is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
# CONFIG_FB_SIS is not set
CONFIG_FB_VIA=y
CONFIG_FB_VIA_DIRECT_PROCFS=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
CONFIG_FB_TRIDENT=y
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
# CONFIG_FB_CARMINE_DRAM_EVAL is not set
CONFIG_CARMINE_DRAM_CUSTOM=y
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=y
# CONFIG_FB_TMIO_ACCELL is not set
CONFIG_FB_METRONOME=y
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_BROADSHEET=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_ADP8860=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_PCM_OSS is not set
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_HRTIMER is not set
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
# CONFIG_SND_PCM_XRUN_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
CONFIG_SND_OPL3_LIB_SEQ=y
CONFIG_SND_OPL4_LIB_SEQ=y
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=y
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_OPL4_LIB=y
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_WSS_LIB=y
CONFIG_SND_SB_COMMON=y
CONFIG_SND_SB16_DSP=y
CONFIG_SND_ISA=y
CONFIG_SND_ADLIB=y
CONFIG_SND_AD1848=y
CONFIG_SND_CMI8330=y
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4236 is not set
CONFIG_SND_ES1688=y
CONFIG_SND_ES18XX=y
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
CONFIG_SND_GUSEXTREME=y
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_JAZZ16 is not set
# CONFIG_SND_OPL3SA2 is not set
CONFIG_SND_OPTI92X_AD1848=y
CONFIG_SND_OPTI92X_CS4231=y
CONFIG_SND_OPTI93X=y
CONFIG_SND_MIRO=y
# CONFIG_SND_SB8 is not set
CONFIG_SND_SB16=y
# CONFIG_SND_SBAWE is not set
CONFIG_SND_SB16_CSP=y
# CONFIG_SND_SGALAXY is not set
CONFIG_SND_SSCAPE=y
CONFIG_SND_WAVEFRONT=y
CONFIG_SND_MSND_PINNACLE=y
CONFIG_SND_MSND_CLASSIC=y
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=y
CONFIG_SND_ASIHPI=y
CONFIG_SND_ATIIXP=y
# CONFIG_SND_ATIIXP_MODEM is not set
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=y
CONFIG_SND_BT87X=y
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=y
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=y
CONFIG_SND_CS5535AUDIO=y
CONFIG_SND_CTXFI=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
# CONFIG_SND_LAYLA24 is not set
CONFIG_SND_MONA=y
CONFIG_SND_MIA=y
CONFIG_SND_ECHO3G=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=y
CONFIG_SND_INDIGODJX=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
# CONFIG_SND_ENS1370 is not set
CONFIG_SND_ENS1371=y
# CONFIG_SND_ES1938 is not set
CONFIG_SND_ES1968=y
CONFIG_SND_ES1968_INPUT=y
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
# CONFIG_SND_HDA_CODEC_INTELHDMI is not set
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=y
#
# Don't forget to add built-in firmwares for HDSP driver
#
CONFIG_SND_HDSPM=y
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=y
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=y
CONFIG_SND_MAESTRO3_INPUT=y
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
CONFIG_SND_RME32=y
# CONFIG_SND_RME96 is not set
CONFIG_SND_RME9652=y
CONFIG_SND_SIS7019=y
CONFIG_SND_SONICVIBES=y
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=y
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=y
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_MOUSE=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HWA_HCD=y
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
# CONFIG_USB_STORAGE_SDDR55 is not set
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
CONFIG_USB_MICROTEK=y
#
# USB port drivers
#
CONFIG_USB_USS720=y
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_SEVSEG=y
CONFIG_USB_RIO500=y
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=y
# CONFIG_USB_CYPRESS_CY7C63 is not set
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=y
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=y
CONFIG_USB_ISIGHTFW=y
# CONFIG_USB_ATM is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
# CONFIG_UWB_WLP is not set
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=y
CONFIG_MMC_TIFM_SD=y
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=y
CONFIG_TIMB_DMA=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
# CONFIG_UIO is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
CONFIG_FSCACHE=y
# CONFIG_FSCACHE_STATS is not set
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_FSCACHE_OBJECT_LIST=y
# CONFIG_CACHEFILES is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
# CONFIG_SMB_FS is not set
CONFIG_CEPH_FS=y
CONFIG_CEPH_FS_PRETTYDEBUG=y
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
CONFIG_ACORN_PARTITION_EESOX=y
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
CONFIG_NLS_ISO8859_3=y
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_KSYM_TRACER=y
CONFIG_PROFILE_KSYM_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
# CONFIG_IO_DELAY_0XED is not set
CONFIG_IO_DELAY_UDELAY=y
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=2
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_PATH=y
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_TOMOYO=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
CONFIG_IMA_LSM_RULES=y
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=y
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
CONFIG_CRYPTO_DEV_GEODE=y
CONFIG_CRYPTO_DEV_HIFN_795X=y
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
CONFIG_VHOST_NET=y
CONFIG_LGUEST=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_FORCE_SUCCESSFUL_BUILD=y
CONFIG_FORCE_MINIMAL_CONFIG=y
CONFIG_FORCE_MINIMAL_CONFIG_PHYS=y
CONFIG_X86_32_ALWAYS_ON=y
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-06-30 7:44 ` Ingo Molnar
@ 2010-06-30 7:52 ` Christoph Hellwig
2010-06-30 7:58 ` Ingo Molnar
0 siblings, 1 reply; 24+ messages in thread
From: Christoph Hellwig @ 2010-06-30 7:52 UTC (permalink / raw)
To: Ingo Molnar; +Cc: mingo, hpa, linux-kernel, hch, tglx, linux-tip-commits
> Reverting 7974891db2 and dcfa72628 makes the crash go away.
>
> Full crashlog and config attached.
What kernel is the .config for? Trying to compile your x86/irq branch
with it asks lots of questions during make oldconfig for it.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-06-30 7:52 ` Christoph Hellwig
@ 2010-06-30 7:58 ` Ingo Molnar
2010-06-30 8:04 ` Ingo Molnar
0 siblings, 1 reply; 24+ messages in thread
From: Ingo Molnar @ 2010-06-30 7:58 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: mingo, hpa, linux-kernel, tglx, linux-tip-commits
* Christoph Hellwig <hch@lst.de> wrote:
> > Reverting 7974891db2 and dcfa72628 makes the crash go away.
> >
> > Full crashlog and config attached.
>
> What kernel is the .config for? Trying to compile your x86/irq branch
> with it asks lots of questions during make oldconfig for it.
Just accept the defaults for it.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-06-30 7:58 ` Ingo Molnar
@ 2010-06-30 8:04 ` Ingo Molnar
2010-07-08 20:42 ` Ingo Molnar
0 siblings, 1 reply; 24+ messages in thread
From: Ingo Molnar @ 2010-06-30 8:04 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: mingo, hpa, linux-kernel, tglx, linux-tip-commits
* Ingo Molnar <mingo@elte.hu> wrote:
>
> * Christoph Hellwig <hch@lst.de> wrote:
>
> > > Reverting 7974891db2 and dcfa72628 makes the crash go away.
> > >
> > > Full crashlog and config attached.
> >
> > What kernel is the .config for? Trying to compile your x86/irq branch
> > with it asks lots of questions during make oldconfig for it.
>
> Just accept the defaults for it.
I can see the crash with vanilla x86/irq as well, with the config i sent.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-06-30 8:04 ` Ingo Molnar
@ 2010-07-08 20:42 ` Ingo Molnar
2010-07-08 20:53 ` Christoph Hellwig
0 siblings, 1 reply; 24+ messages in thread
From: Ingo Molnar @ 2010-07-08 20:42 UTC (permalink / raw)
To: Christoph Hellwig; +Cc: mingo, hpa, linux-kernel, tglx, linux-tip-commits
* Ingo Molnar <mingo@elte.hu> wrote:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> >
> > * Christoph Hellwig <hch@lst.de> wrote:
> >
> > > > Reverting 7974891db2 and dcfa72628 makes the crash go away.
> > > >
> > > > Full crashlog and config attached.
> > >
> > > What kernel is the .config for? Trying to compile your x86/irq branch
> > > with it asks lots of questions during make oldconfig for it.
> >
> > Just accept the defaults for it.
>
> I can see the crash with vanilla x86/irq as well, with the config i sent.
Ping?
Ingo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-08 20:42 ` Ingo Molnar
@ 2010-07-08 20:53 ` Christoph Hellwig
2010-07-14 15:12 ` Christoph Hellwig
0 siblings, 1 reply; 24+ messages in thread
From: Christoph Hellwig @ 2010-07-08 20:53 UTC (permalink / raw)
To: Ingo Molnar
Cc: Christoph Hellwig, mingo, hpa, linux-kernel, tglx, linux-tip-commits
> > I can see the crash with vanilla x86/irq as well, with the config i sent.
>
> Ping?
Sorry, got preempted by a few important things when bisecting when it
broke over my tested config. Give me another day or two.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-08 20:53 ` Christoph Hellwig
@ 2010-07-14 15:12 ` Christoph Hellwig
2010-07-14 15:27 ` Thomas Gleixner
0 siblings, 1 reply; 24+ messages in thread
From: Christoph Hellwig @ 2010-07-14 15:12 UTC (permalink / raw)
To: Ingo Molnar
Cc: Christoph Hellwig, mingo, hpa, linux-kernel, tglx,
linux-tip-commits, rostedt
Turns out this wasn't a regression introduced by a commit, but it
happens when CONFIG_FUNCTION_GRAPH_TRACER is enabled. From a quick
look I have no idea why these would interact badly, especially as
CONFIG_FUNCTION_GRAPH_TRACER works fine with irq stacks if the
CONFIG_4KSTACKS options is set.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-14 15:12 ` Christoph Hellwig
@ 2010-07-14 15:27 ` Thomas Gleixner
2010-07-14 15:47 ` Christoph Hellwig
2010-07-14 19:02 ` David Miller
0 siblings, 2 replies; 24+ messages in thread
From: Thomas Gleixner @ 2010-07-14 15:27 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Ingo Molnar, mingo, hpa, linux-kernel, linux-tip-commits, rostedt
On Wed, 14 Jul 2010, Christoph Hellwig wrote:
> Turns out this wasn't a regression introduced by a commit, but it
> happens when CONFIG_FUNCTION_GRAPH_TRACER is enabled. From a quick
> look I have no idea why these would interact badly, especially as
> CONFIG_FUNCTION_GRAPH_TRACER works fine with irq stacks if the
> CONFIG_4KSTACKS options is set.
So you're saying, that the problem appears when
CONFIG_FUNCTION_GRAPH_TRACER is enabled w/o being used and that it
exists prior to your patches with irq stacks and 8k stack size, but
works with 4k stacks. That's definitely more than odd.
Thanks,
tglx
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-14 15:27 ` Thomas Gleixner
@ 2010-07-14 15:47 ` Christoph Hellwig
2010-07-14 18:21 ` Steven Rostedt
2010-07-23 14:15 ` [tip:x86/irq] x86: Always use irq stacks Steven Rostedt
2010-07-14 19:02 ` David Miller
1 sibling, 2 replies; 24+ messages in thread
From: Christoph Hellwig @ 2010-07-14 15:47 UTC (permalink / raw)
To: Thomas Gleixner
Cc: Christoph Hellwig, Ingo Molnar, mingo, hpa, linux-kernel,
linux-tip-commits, rostedt
On Wed, Jul 14, 2010 at 05:27:01PM +0200, Thomas Gleixner wrote:
> On Wed, 14 Jul 2010, Christoph Hellwig wrote:
>
> > Turns out this wasn't a regression introduced by a commit, but it
> > happens when CONFIG_FUNCTION_GRAPH_TRACER is enabled. From a quick
> > look I have no idea why these would interact badly, especially as
> > CONFIG_FUNCTION_GRAPH_TRACER works fine with irq stacks if the
> > CONFIG_4KSTACKS options is set.
>
> So you're saying, that the problem appears when
> CONFIG_FUNCTION_GRAPH_TRACER is enabled w/o being used and that it
> exists prior to your patches with irq stacks and 8k stack size, but
> works with 4k stacks. That's definitely more than odd.
No, the problem does not show up with 8k stack size without irqstacks,
and does not show up with 4k stacks with irq stacks, but does show up
with 8k stacks with irqstacks as long as CONFIG_FUNCTION_GRAPH_TRACER is
enabled. Just disabling it in Ingo's example config makes it work,
and enabling it in my usual test configs makes the boot fail with
similar messages to the one Ingo sees.
>
> Thanks,
>
> tglx
---end quoted text---
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-14 15:47 ` Christoph Hellwig
@ 2010-07-14 18:21 ` Steven Rostedt
2010-07-27 12:13 ` Christoph Hellwig
2010-07-23 14:15 ` [tip:x86/irq] x86: Always use irq stacks Steven Rostedt
1 sibling, 1 reply; 24+ messages in thread
From: Steven Rostedt @ 2010-07-14 18:21 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Thomas Gleixner, Ingo Molnar, mingo, hpa, linux-kernel,
linux-tip-commits
On Wed, 2010-07-14 at 17:47 +0200, Christoph Hellwig wrote:
> On Wed, Jul 14, 2010 at 05:27:01PM +0200, Thomas Gleixner wrote:
> > On Wed, 14 Jul 2010, Christoph Hellwig wrote:
> >
> > > Turns out this wasn't a regression introduced by a commit, but it
> > > happens when CONFIG_FUNCTION_GRAPH_TRACER is enabled. From a quick
> > > look I have no idea why these would interact badly, especially as
> > > CONFIG_FUNCTION_GRAPH_TRACER works fine with irq stacks if the
> > > CONFIG_4KSTACKS options is set.
> >
> > So you're saying, that the problem appears when
> > CONFIG_FUNCTION_GRAPH_TRACER is enabled w/o being used and that it
> > exists prior to your patches with irq stacks and 8k stack size, but
> > works with 4k stacks. That's definitely more than odd.
>
> No, the problem does not show up with 8k stack size without irqstacks,
> and does not show up with 4k stacks with irq stacks, but does show up
> with 8k stacks with irqstacks as long as CONFIG_FUNCTION_GRAPH_TRACER is
> enabled. Just disabling it in Ingo's example config makes it work,
> and enabling it in my usual test configs makes the boot fail with
> similar messages to the one Ingo sees.
I'm currently at OLS, but I can take a look at this in more detail when
I get back on Monday.
-- Steve
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-14 15:27 ` Thomas Gleixner
2010-07-14 15:47 ` Christoph Hellwig
@ 2010-07-14 19:02 ` David Miller
1 sibling, 0 replies; 24+ messages in thread
From: David Miller @ 2010-07-14 19:02 UTC (permalink / raw)
To: tglx; +Cc: hch, mingo, mingo, hpa, linux-kernel, linux-tip-commits, rostedt
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 14 Jul 2010 17:27:01 +0200 (CEST)
> On Wed, 14 Jul 2010, Christoph Hellwig wrote:
>
>> Turns out this wasn't a regression introduced by a commit, but it
>> happens when CONFIG_FUNCTION_GRAPH_TRACER is enabled. From a quick
>> look I have no idea why these would interact badly, especially as
>> CONFIG_FUNCTION_GRAPH_TRACER works fine with irq stacks if the
>> CONFIG_4KSTACKS options is set.
>
> So you're saying, that the problem appears when
> CONFIG_FUNCTION_GRAPH_TRACER is enabled w/o being used and that it
> exists prior to your patches with irq stacks and 8k stack size, but
> works with 4k stacks. That's definitely more than odd.
Some hard-coded check somewhere assuming kernel stack pages
won't straddle a page boundary?
Just a guess...
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-14 15:47 ` Christoph Hellwig
2010-07-14 18:21 ` Steven Rostedt
@ 2010-07-23 14:15 ` Steven Rostedt
2010-07-23 14:24 ` Steven Rostedt
1 sibling, 1 reply; 24+ messages in thread
From: Steven Rostedt @ 2010-07-23 14:15 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Thomas Gleixner, Ingo Molnar, mingo, hpa, linux-kernel,
linux-tip-commits
On Wed, 2010-07-14 at 17:47 +0200, Christoph Hellwig wrote:
> > So you're saying, that the problem appears when
> > CONFIG_FUNCTION_GRAPH_TRACER is enabled w/o being used and that it
> > exists prior to your patches with irq stacks and 8k stack size, but
> > works with 4k stacks. That's definitely more than odd.
>
> No, the problem does not show up with 8k stack size without irqstacks,
> and does not show up with 4k stacks with irq stacks, but does show up
> with 8k stacks with irqstacks as long as CONFIG_FUNCTION_GRAPH_TRACER is
> enabled. Just disabling it in Ingo's example config makes it work,
> and enabling it in my usual test configs makes the boot fail with
> similar messages to the one Ingo sees.
Examining the difference between 32bit and 64bit (where it only triggers
for 32bit) I found this:
In arch/x86/kernel/dumpstack_64.c:
tinfo = task_thread_info(task);
[...]
bp = ops->walk_stack(tinfo, stack, bp, ops,
data, estack_end, &graph);
Note: tinfo here that is passed to walk_stack() is the actual thread
info structure for the task.
In arch/x86/kernel/dumpstack_32.c:
context = (struct thread_info *)
((unsigned long)stack & (~(THREAD_SIZE - 1)));
bp = ops->walk_stack(context, stack, bp, ops, data, NULL, &graph);
Note: here, context (which ends up being tinfo) is just a bitmasking of
the current stack. If the stack is the irqstack, then what is passed to
walk_stack() is not the actual thread info structure.
Note, if THREAD_SIZE is 8k and irqstacks are 4K then context is totally
wrong here.
Now for the reason that function graph noticed this:
static const struct stacktrace_ops print_trace_ops = {
.warning = print_trace_warning,
.warning_symbol = print_trace_warning_symbol,
.stack = print_trace_stack,
.address = print_trace_address,
.walk_stack = print_context_stack,
};
Where walk_stack is print_context_stack:
tinfo is pretty much ignored in print_context_stack, but when function
graph is enabled we have:
print_ftrace_graph_addr(addr, data, ops, tinfo, graph);
Which actually plays with the tinfo structure. If tinfo is corrupted
here, then we get the bug.
-- Steve
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-23 14:15 ` [tip:x86/irq] x86: Always use irq stacks Steven Rostedt
@ 2010-07-23 14:24 ` Steven Rostedt
2010-07-23 16:39 ` Christoph Hellwig
0 siblings, 1 reply; 24+ messages in thread
From: Steven Rostedt @ 2010-07-23 14:24 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Thomas Gleixner, Ingo Molnar, mingo, hpa, linux-kernel,
linux-tip-commits
On Fri, 2010-07-23 at 10:15 -0400, Steven Rostedt wrote:
> On Wed, 2010-07-14 at 17:47 +0200, Christoph Hellwig wrote:
> In arch/x86/kernel/dumpstack_32.c:
>
> context = (struct thread_info *)
> ((unsigned long)stack & (~(THREAD_SIZE - 1)));
> bp = ops->walk_stack(context, stack, bp, ops, data, NULL, &graph);
>
> Note: here, context (which ends up being tinfo) is just a bitmasking of
> the current stack. If the stack is the irqstack, then what is passed to
> walk_stack() is not the actual thread info structure.
>
> Note, if THREAD_SIZE is 8k and irqstacks are 4K then context is totally
> wrong here.
irqstacks are indeed 8k as well, but:
union irq_ctx {
struct thread_info tinfo;
u32 stack[THREAD_SIZE/sizeof(u32)];
} __attribute__((aligned(PAGE_SIZE)));
The stack is 8k, but it is aligned 4k. Which will have
context = (struct thread_info *)
((unsigned long)stack & (~(THREAD_SIZE - 1)));
not give the expected result.
So we should do:
} __attribute__((aligned(THREAD_SIZE)));
-- Steve
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-23 14:24 ` Steven Rostedt
@ 2010-07-23 16:39 ` Christoph Hellwig
0 siblings, 0 replies; 24+ messages in thread
From: Christoph Hellwig @ 2010-07-23 16:39 UTC (permalink / raw)
To: Steven Rostedt
Cc: Christoph Hellwig, Thomas Gleixner, Ingo Molnar, mingo, hpa,
linux-kernel, linux-tip-commits
On Fri, Jul 23, 2010 at 10:24:02AM -0400, Steven Rostedt wrote:
> So we should do:
>
> } __attribute__((aligned(THREAD_SIZE)));
Yes, that looks like a likely culprit. I tried to verify it, but right
now I can't reproduce the issue anymore. I've done another completely
clean rebuild to see if I can reproduce it again.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-14 18:21 ` Steven Rostedt
@ 2010-07-27 12:13 ` Christoph Hellwig
2010-07-27 16:29 ` H. Peter Anvin
2010-07-27 18:36 ` [tip:x86/irq] x86-32: Align IRQ stacks properly tip-bot for Christoph Hellwig
0 siblings, 2 replies; 24+ messages in thread
From: Christoph Hellwig @ 2010-07-27 12:13 UTC (permalink / raw)
To: Steven Rostedt
Cc: Christoph Hellwig, Thomas Gleixner, Ingo Molnar, mingo, hpa,
linux-kernel, linux-tip-commits
Ingo, can you test this patch implementing Steve's suggestion?
Unfortunately I'm not able to reproduce the bug on my setup anymore.
---
From: Christoph Hellwig <hch@lst.de>
Subject: [PATCH] x86-32: align irq stacks properly
As suggested by Steven Rostedt we need to align the irq stacks on the
stack size, not just the page size to make them work for stack traces
with 8k stacks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Index: linux-2.6-tip/arch/x86/kernel/irq_32.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/irq_32.c 2010-07-27 14:06:50.634494682 +0200
+++ linux-2.6-tip/arch/x86/kernel/irq_32.c 2010-07-27 14:06:58.031494680 +0200
@@ -55,7 +55,7 @@ static inline void print_stack_overflow(
union irq_ctx {
struct thread_info tinfo;
u32 stack[THREAD_SIZE/sizeof(u32)];
-} __attribute__((aligned(PAGE_SIZE)));
+} __attribute__((aligned(THREAD_SIZE)));
static DEFINE_PER_CPU(union irq_ctx *, hardirq_ctx);
static DEFINE_PER_CPU(union irq_ctx *, softirq_ctx);
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-07-27 12:13 ` Christoph Hellwig
@ 2010-07-27 16:29 ` H. Peter Anvin
2010-07-27 18:36 ` [tip:x86/irq] x86-32: Align IRQ stacks properly tip-bot for Christoph Hellwig
1 sibling, 0 replies; 24+ messages in thread
From: H. Peter Anvin @ 2010-07-27 16:29 UTC (permalink / raw)
To: Christoph Hellwig
Cc: Steven Rostedt, Thomas Gleixner, Ingo Molnar, mingo,
linux-kernel, linux-tip-commits
On 07/27/2010 05:13 AM, Christoph Hellwig wrote:
> Ingo, can you test this patch implementing Steve's suggestion?
> Unfortunately I'm not able to reproduce the bug on my setup anymore.
Ingo is on vacation this week, but regardless of it it fixes the problem
it is absolutely necessary. As far as reproducing -- without it you get
a 50% build time chance to get a working kernel...
-hpa
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [tip:x86/irq] x86-32: Align IRQ stacks properly
2010-07-27 12:13 ` Christoph Hellwig
2010-07-27 16:29 ` H. Peter Anvin
@ 2010-07-27 18:36 ` tip-bot for Christoph Hellwig
1 sibling, 0 replies; 24+ messages in thread
From: tip-bot for Christoph Hellwig @ 2010-07-27 18:36 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, hch, tglx
Commit-ID: 25897374297906eeebef8864299406bdcb5859c3
Gitweb: http://git.kernel.org/tip/25897374297906eeebef8864299406bdcb5859c3
Author: Christoph Hellwig <hch@lst.de>
AuthorDate: Tue, 27 Jul 2010 14:13:13 +0200
Committer: H. Peter Anvin <hpa@zytor.com>
CommitDate: Tue, 27 Jul 2010 10:06:54 -0700
x86-32: Align IRQ stacks properly
As suggested by Steven Rostedt we need to align the IRQ stacks to the
stack size, not just the page size to make them work for stack traces
and other things that depend on finding the stack slot itself with 8k
stacks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
LKML-Reference: <20100727121313.GA19976@lst.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
arch/x86/kernel/irq_32.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 67f5f9f..3b5609f 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -55,7 +55,7 @@ static inline void print_stack_overflow(void) { }
union irq_ctx {
struct thread_info tinfo;
u32 stack[THREAD_SIZE/sizeof(u32)];
-} __attribute__((aligned(PAGE_SIZE)));
+} __attribute__((aligned(THREAD_SIZE)));
static DEFINE_PER_CPU(union irq_ctx *, hardirq_ctx);
static DEFINE_PER_CPU(union irq_ctx *, softirq_ctx);
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-06-29 10:21 ` [tip:x86/irq] x86: Always " tip-bot for Christoph Hellwig
2010-06-30 7:44 ` Ingo Molnar
@ 2010-09-03 15:00 ` Ingo Molnar
2010-09-06 18:53 ` Alexander van Heukelum
1 sibling, 1 reply; 24+ messages in thread
From: Ingo Molnar @ 2010-09-03 15:00 UTC (permalink / raw)
To: mingo, hpa, linux-kernel, hch, tglx; +Cc: linux-tip-commits
[-- Attachment #1: Type: text/plain, Size: 2584 bytes --]
* tip-bot for Christoph Hellwig <hch@lst.de> wrote:
> Commit-ID: 7974891db234467eaf1fec613ec0129cb4ac2332
> Gitweb: http://git.kernel.org/tip/7974891db234467eaf1fec613ec0129cb4ac2332
> Author: Christoph Hellwig <hch@lst.de>
> AuthorDate: Mon, 28 Jun 2010 14:15:54 +0200
> Committer: Thomas Gleixner <tglx@linutronix.de>
> CommitDate: Tue, 29 Jun 2010 12:12:59 +0200
>
> x86: Always use irq stacks
There is another (and different) kind of boot failure on 32-bit x86:
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
EXT3-fs: barriers not enabled
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#1] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000000 EBX: 41f62d70 ECX: 00000000 EDX: 41f62000
ESI: 00000000 EDI: 41c5bc3c EBP: 41f62d54 ESP: 41f62d30
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f62d84 ffffe000 41f62000 41f62d84 41f62d70 41c5bc3c
<0> 41f62000 41f62d84 4102ca48 41c5bc3c 7f9731b0 00000000 41f62d74 41f62d84
<0> 41047a83 00000000 7f9731b0 00000046 7f9731d4 41f62d9c 41033e50 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#2] PREEMPT
last sysfs file:
Which crash i managed to bisect back to this commit:
| 7974891db234467eaf1fec613ec0129cb4ac2332 is the first bad commit
| commit 7974891db234467eaf1fec613ec0129cb4ac2332
| Author: Christoph Hellwig <hch@lst.de>
| Date: Mon Jun 28 14:15:54 2010 +0200
|
| x86: Always use irq stacks
I've attached the config and the full crashlog.
Checking out 7974891db2 and building+booting a kernel with this config
causes shows the crash.
Checking out 7974891db2~1 and building+booting a kernel with this config
gives a working system.
Note that tip:x86/irq has these commits currently:
1813a68: x86: Move alloc_desk_mask variables inside ifdef
2589737: x86-32: Align IRQ stacks properly
dcfa726: x86: Remove CONFIG_4KSTACKS
7974891: x86: Always use irq stacks
Although i didnt expect it to be relevant to the regression, i double
checked that 1813a68 (i.e. all fixes applied) regresses too - it does.
Thanks,
Ingo
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 65161 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.35-rc3
# Fri Sep 3 18:35:49 2010
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_VMI is not set
# CONFIG_KVM_CLOCK is not set
CONFIG_KVM_GUEST=y
# CONFIG_LGUEST_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_MATOM=y
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_CPU_SUP_TRANSMETA_32 is not set
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=1
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_INJECT=y
# CONFIG_VM86 is not set
# CONFIG_TOSHIBA is not set
CONFIG_I8K=y
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
# CONFIG_VMSPLIT_3G is not set
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
CONFIG_VMSPLIT_1G=y
CONFIG_PAGE_OFFSET=0x40000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MATH_EMULATION=y
# CONFIG_MTRR is not set
# CONFIG_SECCOMP is not set
CONFIG_CC_STACKPROTECTOR=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_COMPAT_VDSO=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_PM_RUNTIME is not set
# CONFIG_ACPI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
CONFIG_PCI_GOMMCONFIG=y
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=y
# CONFIG_SCx200HR_TIMER is not set
CONFIG_OLPC=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
# CONFIG_NET_IPGRE_BROADCAST is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
CONFIG_TCP_CONG_LP=y
# CONFIG_TCP_CONG_VENO is not set
CONFIG_TCP_CONG_YEAH=y
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_HL=y
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HL=y
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_MATCH_AH=y
# CONFIG_IP_NF_MATCH_ECN is not set
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
CONFIG_IP_NF_TARGET_ULOG=y
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_TARGET_TTL=y
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_MSG=y
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_RDS is not set
CONFIG_TIPC=y
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
CONFIG_TIPC_DEBUG=y
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
# CONFIG_NET_DSA_TAG_EDSA is not set
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_IPX=y
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=y
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_INGRESS is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_NAT=y
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
# CONFIG_NETROM is not set
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_YAM=y
CONFIG_CAN=y
CONFIG_CAN_RAW=y
# CONFIG_CAN_BCM is not set
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=y
CONFIG_CAN_DEV=y
CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_MCP251X=y
CONFIG_CAN_SJA1000=y
# CONFIG_CAN_SJA1000_PLATFORM is not set
CONFIG_CAN_EMS_PCI=y
CONFIG_CAN_KVASER_PCI=y
# CONFIG_CAN_PLX_PCI is not set
#
# CAN USB interfaces
#
CONFIG_CAN_EMS_USB=y
CONFIG_CAN_DEBUG_DEVICES=y
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_L2CAP_EXT_FEATURES is not set
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=y
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIBTSDIO=y
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
# CONFIG_BT_HCIBCM203X is not set
CONFIG_BT_HCIBPA10X=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
CONFIG_BT_HCIBTUART=y
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
CONFIG_AF_RXRPC=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=y
CONFIG_LIB80211_CRYPT_WEP=y
CONFIG_LIB80211_CRYPT_CCMP=y
CONFIG_LIB80211_CRYPT_TKIP=y
# CONFIG_LIB80211_DEBUG is not set
#
# CFG80211 needs to be enabled for MAC80211
#
#
# Some wireless drivers require a rate control algorithm
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
# CONFIG_CAIF_NETDEV is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_XIP=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
CONFIG_BLK_DEV_3W_XXXX_RAID=y
CONFIG_SCSI_HPSA=y
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=y
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=y
CONFIG_AIC94XX_DEBUG=y
CONFIG_SCSI_MVSAS=y
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=y
CONFIG_SCSI_ADVANSYS=y
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=y
# CONFIG_SCSI_BUSLOGIC is not set
CONFIG_VMWARE_PVSCSI=y
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
# CONFIG_FCOE is not set
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_IPS=y
CONFIG_SCSI_INITIO=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_NSP32=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_PMCRAID=y
CONFIG_SCSI_PM8001=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
CONFIG_SATA_INIC162X=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=y
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
CONFIG_SATA_ULI=y
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=y
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_CS5520=y
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
CONFIG_PATA_CS5536=y
CONFIG_PATA_CYPRESS=y
# CONFIG_PATA_EFAR is not set
CONFIG_PATA_HPT366=y
CONFIG_PATA_HPT37X=y
CONFIG_PATA_HPT3X2N=y
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
CONFIG_PATA_NS87415=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
CONFIG_PATA_RADISYS=y
CONFIG_PATA_RDC=y
CONFIG_PATA_SC1200=y
# CONFIG_PATA_SCH is not set
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_PATA_NS87410=y
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_RZ1000=y
#
# Generic fallback / legacy drivers
#
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_FUSION=y
# CONFIG_FUSION_SPI is not set
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LAN is not set
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_PCILYNX=y
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
CONFIG_IEEE1394_VIDEO1394=y
CONFIG_IEEE1394_DV1394=y
CONFIG_IEEE1394_VERBOSEDEBUG=y
CONFIG_I2O=y
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
# CONFIG_I2O_CONFIG is not set
# CONFIG_I2O_BUS is not set
# CONFIG_I2O_BLOCK is not set
CONFIG_I2O_SCSI=y
# CONFIG_I2O_PROC is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
# CONFIG_IFB is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_VETH=y
CONFIG_ARCNET=y
CONFIG_ARCNET_1201=y
CONFIG_ARCNET_1051=y
# CONFIG_ARCNET_RAW is not set
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=y
CONFIG_ARCNET_COM90xxIO=y
# CONFIG_ARCNET_RIM_I is not set
CONFIG_ARCNET_COM20020=y
# CONFIG_ARCNET_COM20020_PCI is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
CONFIG_LSI_ET1011C_PHY=y
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_ENC28J60=y
CONFIG_ENC28J60_WRITEVERIFY=y
CONFIG_ETHOC=y
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_KSZ884X_PCI=y
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_E100=y
CONFIG_FEALNX=y
CONFIG_NATSEMI=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R6040=y
CONFIG_SIS900=y
# CONFIG_EPIC100 is not set
CONFIG_SMSC9420=y
CONFIG_SUNDANCE=y
CONFIG_SUNDANCE_MMIO=y
CONFIG_TLAN=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IP1000=y
CONFIG_IGB=y
# CONFIG_IGB_DCA is not set
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
CONFIG_HAMACHI=y
CONFIG_YELLOWFIN=y
CONFIG_R8169=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
# CONFIG_SKY2 is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_QLA3XXX=y
# CONFIG_ATL1 is not set
CONFIG_ATL1E=y
CONFIG_ATL1C=y
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_CHELSIO_T4_DEPENDS=y
CONFIG_CHELSIO_T4=y
CONFIG_ENIC=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
CONFIG_S2IO=y
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=y
# CONFIG_MYRI10GE_DCA is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
CONFIG_3C359=y
CONFIG_TMS380TR=y
# CONFIG_TMSPCI is not set
CONFIG_ABYSS=y
CONFIG_WLAN=y
CONFIG_PCMCIA_RAYCS=y
CONFIG_AIRO=y
CONFIG_ATMEL=y
# CONFIG_PCI_ATMEL is not set
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_AIRO_CS is not set
CONFIG_PCMCIA_WL3501=y
CONFIG_PRISM54=y
CONFIG_USB_ZD1201=y
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=y
# CONFIG_HOSTAP_PCI is not set
CONFIG_HOSTAP_CS=y
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_SMSC75XX=y
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=y
CONFIG_USB_NET_INT51X1=y
# CONFIG_USB_CDC_PHONET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_USB_SIERRA_NET=y
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
CONFIG_PCMCIA_FMVJ18X=y
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=y
CONFIG_PCMCIA_XIRC2PS=y
# CONFIG_PCMCIA_AXNET is not set
CONFIG_ARCNET_COM20020_CS=y
CONFIG_PCMCIA_IBMTR=y
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=y
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
CONFIG_ATM_ZATM=y
# CONFIG_ATM_ZATM_DEBUG is not set
# CONFIG_ATM_NICSTAR is not set
CONFIG_ATM_IDT77252=y
CONFIG_ATM_IDT77252_DEBUG=y
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=y
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=y
CONFIG_ATM_HORIZON_DEBUG=y
CONFIG_ATM_IA=y
CONFIG_ATM_IA_DEBUG=y
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
CONFIG_IEEE802154_DRIVERS=y
CONFIG_IEEE802154_FAKEHARD=y
#
# CAIF transport drivers
#
CONFIG_CAIF_TTY=y
CONFIG_FDDI=y
CONFIG_DEFXX=y
# CONFIG_DEFXX_MMIO is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=y
# CONFIG_PPPOE is not set
CONFIG_PPPOATM=y
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=y
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VMXNET3=y
CONFIG_ISDN=y
CONFIG_ISDN_I4L=y
# CONFIG_ISDN_PPP is not set
# CONFIG_ISDN_AUDIO is not set
#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
CONFIG_ISDN_DIVERSION=y
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
# CONFIG_ISDN_DRV_HISAX is not set
#
# Active cards
#
# CONFIG_ISDN_CAPI is not set
# CONFIG_ISDN_DRV_GIGASET is not set
# CONFIG_MISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
CONFIG_KEYBOARD_LKKBD=y
# CONFIG_KEYBOARD_GPIO is not set
CONFIG_KEYBOARD_TCA6416=y
CONFIG_KEYBOARD_MATRIX=y
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_STOWAWAY=y
CONFIG_KEYBOARD_SUNKBD=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
CONFIG_JOYSTICK_GRIP=y
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
CONFIG_JOYSTICK_TMDC=y
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
CONFIG_JOYSTICK_SPACEORB=y
CONFIG_JOYSTICK_SPACEBALL=y
CONFIG_JOYSTICK_STINGER=y
CONFIG_JOYSTICK_TWIDJOY=y
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_JOYDUMP=y
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=y
CONFIG_TABLET_USB_AIPTEK=y
CONFIG_TABLET_USB_GTCO=y
CONFIG_TABLET_USB_KBTAB=y
# CONFIG_TABLET_USB_WACOM is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_DIGIEPCA=y
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
CONFIG_RISCOM8=y
# CONFIG_SPECIALIX is not set
# CONFIG_STALDRV is not set
CONFIG_NOZOMI=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
CONFIG_APPLICOM=y
CONFIG_SONYPI=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
CONFIG_CARDMAN_4040=y
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=y
# CONFIG_CS5535_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
CONFIG_I2C_ALI1563=y
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
CONFIG_I2C_ISCH=y
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y
CONFIG_I2C_TINY_USB=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_SCx200_ACB=y
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
CONFIG_SPI_GPIO=y
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
CONFIG_SPI_TLE62X0=y
#
# PPS support
#
CONFIG_PPS=y
CONFIG_PPS_DEBUG=y
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_WM831X=y
# CONFIG_GPIO_WM8350 is not set
CONFIG_GPIO_WM8994=y
CONFIG_GPIO_ADP5520=y
CONFIG_GPIO_ADP5588=y
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=y
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
CONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
# CONFIG_GPIO_MC33880 is not set
#
# AC97 GPIO expanders:
#
#
# MODULbus GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2490=y
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
# CONFIG_MAX8925_POWER is not set
CONFIG_WM831X_BACKUP=y
# CONFIG_WM831X_POWER is not set
CONFIG_WM8350_POWER=y
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_DS2760=y
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_OLPC is not set
CONFIG_BATTERY_BQ27x00=y
CONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_CHARGER_PCF50633=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ABITUGURU3=y
CONFIG_SENSORS_AD7414=y
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_ADM1021=y
CONFIG_SENSORS_ADM1025=y
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7411=y
CONFIG_SENSORS_ADT7462=y
CONFIG_SENSORS_ADT7470=y
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX6650=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SIS5595=y
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=y
CONFIG_SENSORS_AMC6821=y
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=y
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
CONFIG_SENSORS_WM8350=y
# CONFIG_SENSORS_HDAPS is not set
CONFIG_SENSORS_LIS3_SPI=y
CONFIG_SENSORS_LIS3_I2C=y
CONFIG_SENSORS_APPLESMC=y
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_MFD_SUPPORT=y
CONFIG_MFD_CORE=y
CONFIG_MFD_88PM860X=y
CONFIG_MFD_SM501=y
CONFIG_MFD_SM501_GPIO=y
# CONFIG_HTC_PASIC3 is not set
CONFIG_HTC_I2CPLD=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TC35892 is not set
# CONFIG_MFD_TMIO is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=y
CONFIG_MFD_PCF50633=y
CONFIG_MFD_MC13783=y
# CONFIG_PCF50633_ADC is not set
# CONFIG_PCF50633_GPIO is not set
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
# CONFIG_AB3100_OTP is not set
CONFIG_EZX_PCAP=y
CONFIG_AB8500_CORE=y
# CONFIG_AB3550_CORE is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=y
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8925=y
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_WM8994 is not set
# CONFIG_REGULATOR_DA903X is not set
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_LP3971 is not set
CONFIG_REGULATOR_PCAP=y
# CONFIG_REGULATOR_MC13783 is not set
# CONFIG_REGULATOR_AB3100 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_88PM8607=y
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=y
CONFIG_DRM_TDFX=y
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=y
CONFIG_DRM_SIS=y
CONFIG_DRM_VIA=y
CONFIG_DRM_SAVAGE=y
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_LCD_S6E63M0=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_MAX8925 is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_WM831X is not set
# CONFIG_BACKLIGHT_ADP5520 is not set
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_88PM860X is not set
CONFIG_BACKLIGHT_PCF50633=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_SOUND_OSS=y
CONFIG_SOUND_TRACEINIT=y
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_VMIDI=y
# CONFIG_SOUND_TRIX is not set
CONFIG_SOUND_MSS=y
# CONFIG_SOUND_MPU401 is not set
CONFIG_SOUND_PAS=y
CONFIG_PAS_JOYSTICK=y
CONFIG_SOUND_PSS=y
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=y
# CONFIG_SOUND_YM3812 is not set
CONFIG_SOUND_UART6850=y
CONFIG_SOUND_AEDSP16=y
CONFIG_SC6600=y
# CONFIG_SC6600_JOY is not set
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
# CONFIG_SOUND_KAHLUA is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_OTG_WHITELIST=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
CONFIG_USB_MON=y
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
CONFIG_USB_WUSB_CBAF_DEBUG=y
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_U132_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
CONFIG_USB_TMC=y
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=y
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=y
CONFIG_USB_ADUTUX=y
CONFIG_USB_SEVSEG=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
# CONFIG_USB_LED is not set
CONFIG_USB_CYPRESS_CY7C63=y
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=y
CONFIG_USB_FTDI_ELAN=y
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=y
CONFIG_USB_TEST=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_ATM is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
CONFIG_USB_GADGET_R8A66597=y
CONFIG_USB_R8A66597=y
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=y
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FUNCTIONFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
# CONFIG_USB_G_HID is not set
# CONFIG_USB_G_WEBCAM is not set
#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
# CONFIG_UWB_WHCI is not set
# CONFIG_UWB_WLP is not set
CONFIG_UWB_I1480U=y
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
#
# MMC/SD/SDIO Card Drivers
#
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SDRICOH_CS=y
# CONFIG_MMC_CB710 is not set
CONFIG_MMC_VIA_SDMMC=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_WM8350=y
CONFIG_LEDS_DA903X=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_REGULATOR=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=y
# CONFIG_LEDS_ADP5520 is not set
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_ACCESSIBILITY=y
# CONFIG_A11Y_BRAILLE_CONSOLE is not set
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_INFINIBAND_CXGB3 is not set
# CONFIG_INFINIBAND_CXGB4 is not set
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
CONFIG_INFINIBAND_IPOIB=y
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
# CONFIG_INFINIBAND_ISER is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
CONFIG_EDAC_DEBUG=y
# CONFIG_EDAC_DEBUG_VERBOSE is not set
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=y
# CONFIG_TIMB_DMA is not set
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y
CONFIG_DCA=y
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
CONFIG_UIO_AEC=y
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=y
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
CONFIG_XFS_DEBUG=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
# CONFIG_OCFS2_FS_STATS is not set
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
CONFIG_CACHEFILES_DEBUG=y
CONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CEPH_FS=y
# CONFIG_CEPH_FS_PRETTYDEBUG is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_2=y
# CONFIG_NLS_ISO8859_3 is not set
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_LKDTM=y
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_PREEMPT_TRACER=y
# CONFIG_SYSPROF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_DYNAMIC_FTRACE is not set
CONFIG_FUNCTION_PROFILER=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
CONFIG_BUILD_DOCSRC=y
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_SAMPLES=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_4KSTACKS is not set
# CONFIG_DOUBLEFAULT is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
CONFIG_SECURITY_TOMOYO=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_AUDIT=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="tomoyo"
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=y
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_WP512=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
# CONFIG_CRYPTO_KHAZAD is not set
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_586=y
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
# CONFIG_KVM_INTEL is not set
# CONFIG_KVM_AMD is not set
# CONFIG_VHOST_NET is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: crash.log --]
[-- Type: text/plain; charset=utf-8, Size: 195446 bytes --]
Linux version 2.6.35-rc3+ (mingo@sirius) (gcc version 4.4.4 20100514 (Red Hat 4.4.4-3) (GCC) ) #33238 PREEMPT Fri Sep 3 18:18:47 CEST 2010
CPU: vendor_id 'AuthenticAMD' unknown, using generic init.
CPU: Your system may be unstable.
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
bootconsole [earlyser0] enabled
debug: ignoring loglevel setting.
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3fff0 max_arch_pfn = 0x100000
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003fff0000 (usable)
modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
modified: 000000003fff3000 - 0000000040000000 (ACPI data)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 02800000
init_memory_mapping: 0000000000000000-000000003fff0000
0000000000 - 0000400000 page 4k
0000400000 - 003fc00000 page 2M
003fc00000 - 003fff0000 page 4k
kernel direct mapping tables up to 3fff0000 @ 10000-15000
0MB HIGHMEM available.
1023MB LOWMEM available.
mapped low ram: 0 - 3fff0000
low ram: 0 - 3fff0000
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0003fff0
HighMem empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fff0
On node 0 totalpages: 262015
free_area_init_node: node 0, pgdat 41fe5ac0, node_mem_map 4222a200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 2016 pages used for memmap
Normal zone: 256016 pages, LIFO batch:31
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967
Kernel command line: root=/dev/sda1 earlyprintk=ttyS0,115200 console=ttyS0,115200 debug initcall_debug enforcing=0 apic=verbose ignore_loglevel sysrq_always_enabled selinux=0 nmi_watchdog=0 3 panic=1 3
sysrq: sysrq always enabled.
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (24 early reservations)
#0 [0001000000 - 000221d318] TEXT DATA BSS
#1 [000009f800 - 0000100000] BIOS reserved
#2 [000221e000 - 0002228149] BRK
#3 [0000010000 - 0000011000] PGTABLE
#4 [0002229000 - 000222a000] BOOTMEM
#5 [000222a000 - 0002a2a000] BOOTMEM
#6 [000221d340 - 000221d344] BOOTMEM
#7 [000221d380 - 000221d400] BOOTMEM
#8 [000221d400 - 000221d460] BOOTMEM
#9 [0002a2a000 - 0002a2c000] BOOTMEM
#10 [000221d480 - 000221d57c] BOOTMEM
#11 [000221d580 - 000221d5c0] BOOTMEM
#12 [000221d5c0 - 000221d600] BOOTMEM
#13 [000221d600 - 000221d640] BOOTMEM
#14 [000221d640 - 000221d680] BOOTMEM
#15 [000221d680 - 000221d6c0] BOOTMEM
#16 [000221d6c0 - 000221d700] BOOTMEM
#17 [000221d700 - 000221d740] BOOTMEM
#18 [000221d740 - 000221d780] BOOTMEM
#19 [000221d780 - 000221d835] BOOTMEM
#20 [000221d840 - 000221d8f5] BOOTMEM
#21 [0002a2c000 - 0002a30000] BOOTMEM
#22 [0002a30000 - 0002ab0000] BOOTMEM
#23 [0002ab0000 - 0002af0000] BOOTMEM
Initializing HighMem for node 0 (00000000:00000000)
Memory: 1020472k/1048512k available (12632k kernel code, 27588k reserved, 3768k data, 564k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffe3000 - 0xfffff000 ( 112 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0x807f0000 - 0xff7fe000 (2032 MB)
lowmem : 0x40000000 - 0x7fff0000 (1023 MB)
.init : 0x42005000 - 0x42092000 ( 564 kB)
.data : 0x41c560c7 - 0x42004348 (3768 kB)
.text : 0x41000000 - 0x41c560c7 (12632 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16
CPU 0 irqstacks, hard=41f5f000 soft=41f61000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
Fast TSC calibration using PIT
Detected 2010.601 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4021.20 BogoMIPS (lpj=20106010)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
MCE: unknown CPU type - not enabling MCE support.
Performance Events:
CPU: AuthenticAMD AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
calling spawn_ksoftirqd+0x0/0x32 @ 1
initcall spawn_ksoftirqd+0x0/0x32 returned 0 after 0 usecs
calling relay_init+0x0/0x7 @ 1
initcall relay_init+0x0/0x7 returned 0 after 0 usecs
calling tracer_alloc_buffers+0x0/0x163 @ 1
initcall tracer_alloc_buffers+0x0/0x163 returned 0 after 0 usecs
calling init_trace_printk+0x0/0x7 @ 1
initcall init_trace_printk+0x0/0x7 returned 0 after 0 usecs
calling init_mmap_min_addr+0x0/0x11 @ 1
initcall init_mmap_min_addr+0x0/0x11 returned 0 after 0 usecs
calling net_ns_init+0x0/0xf3 @ 1
initcall net_ns_init+0x0/0xf3 returned 0 after 0 usecs
calling pci_reboot_init+0x0/0x11 @ 1
initcall pci_reboot_init+0x0/0x11 returned 0 after 0 usecs
calling reboot_init+0x0/0x11 @ 1
initcall reboot_init+0x0/0x11 returned 0 after 0 usecs
calling sysctl_init+0x0/0x13 @ 1
initcall sysctl_init+0x0/0x13 returned 0 after 0 usecs
calling ksysfs_init+0x0/0x74 @ 1
initcall ksysfs_init+0x0/0x74 returned 0 after 0 usecs
calling async_init+0x0/0x5e @ 1
initcall async_init+0x0/0x5e returned 0 after 0 usecs
calling init_jiffies_clocksource+0x0/0xf @ 1
initcall init_jiffies_clocksource+0x0/0xf returned 0 after 0 usecs
calling pm_init+0x0/0x2d @ 1
initcall pm_init+0x0/0x2d returned 0 after 0 usecs
calling init_ftrace_syscalls+0x0/0x8c @ 1
initcall init_ftrace_syscalls+0x0/0x8c returned 0 after 9765 usecs
calling init_hw_breakpoint+0x0/0x42 @ 1
initcall init_hw_breakpoint+0x0/0x42 returned 0 after 0 usecs
calling init_zero_pfn+0x0/0x14 @ 1
initcall init_zero_pfn+0x0/0x14 returned 0 after 0 usecs
calling filelock_init+0x0/0x30 @ 1
initcall filelock_init+0x0/0x30 returned 0 after 0 usecs
calling init_misc_binfmt+0x0/0x35 @ 1
initcall init_misc_binfmt+0x0/0x35 returned 0 after 0 usecs
calling init_script_binfmt+0x0/0x11 @ 1
initcall init_script_binfmt+0x0/0x11 returned 0 after 0 usecs
calling init_elf_binfmt+0x0/0x11 @ 1
initcall init_elf_binfmt+0x0/0x11 returned 0 after 0 usecs
calling debugfs_init+0x0/0x4a @ 1
initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs
calling securityfs_init+0x0/0x41 @ 1
initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs
calling random32_init+0x0/0x85 @ 1
initcall random32_init+0x0/0x85 returned 0 after 0 usecs
calling test_atomic64+0x0/0x613 @ 1
atomic64 test passed for i586+ platform with CX8 and with SSE
initcall test_atomic64+0x0/0x613 returned 0 after 9765 usecs
calling regulator_init+0x0/0x2c @ 1
regulator: core version 0.5
initcall regulator_init+0x0/0x2c returned 0 after 0 usecs
calling cpuidle_init+0x0/0x19 @ 1
initcall cpuidle_init+0x0/0x19 returned 0 after 0 usecs
calling sock_init+0x0/0x5a @ 1
initcall sock_init+0x0/0x5a returned 0 after 0 usecs
calling net_inuse_init+0x0/0x25 @ 1
initcall net_inuse_init+0x0/0x25 returned 0 after 0 usecs
calling netpoll_init+0x0/0x25 @ 1
initcall netpoll_init+0x0/0x25 returned 0 after 0 usecs
calling netlink_proto_init+0x0/0x19e @ 1
NET: Registered protocol family 16
initcall netlink_proto_init+0x0/0x19e returned 0 after 0 usecs
calling olpc_init+0x0/0x151 @ 1
initcall olpc_init+0x0/0x151 returned 0 after 0 usecs
calling bdi_class_init+0x0/0x40 @ 1
initcall bdi_class_init+0x0/0x40 returned 0 after 0 usecs
calling kobject_uevent_init+0x0/0x1e @ 1
initcall kobject_uevent_init+0x0/0x1e returned 0 after 0 usecs
calling gpiolib_sysfs_init+0x0/0xa2 @ 1
initcall gpiolib_sysfs_init+0x0/0xa2 returned 0 after 0 usecs
calling pcibus_class_init+0x0/0x14 @ 1
initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs
calling pci_driver_init+0x0/0xf @ 1
initcall pci_driver_init+0x0/0xf returned 0 after 0 usecs
calling lcd_class_init+0x0/0x46 @ 1
initcall lcd_class_init+0x0/0x46 returned 0 after 0 usecs
calling backlight_class_init+0x0/0x54 @ 1
initcall backlight_class_init+0x0/0x54 returned 0 after 0 usecs
calling video_output_class_init+0x0/0x14 @ 1
initcall video_output_class_init+0x0/0x14 returned 0 after 0 usecs
calling tty_class_init+0x0/0x2f @ 1
initcall tty_class_init+0x0/0x2f returned 0 after 0 usecs
calling vtconsole_class_init+0x0/0xc4 @ 1
initcall vtconsole_class_init+0x0/0xc4 returned 0 after 0 usecs
calling spi_init+0x0/0x99 @ 1
initcall spi_init+0x0/0x99 returned 0 after 0 usecs
calling i2c_init+0x0/0x57 @ 1
i2c-core: driver [dummy] registered
initcall i2c_init+0x0/0x57 returned 0 after 0 usecs
calling amd_postcore_init+0x0/0x39 @ 1
initcall amd_postcore_init+0x0/0x39 returned 0 after 0 usecs
calling arch_kdebugfs_init+0x0/0x1e @ 1
initcall arch_kdebugfs_init+0x0/0x1e returned 0 after 0 usecs
calling init_pit_clocksource+0x0/0x83 @ 1
initcall init_pit_clocksource+0x0/0x83 returned 0 after 0 usecs
calling dmi_id_init+0x0/0x302 @ 1
initcall dmi_id_init+0x0/0x302 returned 0 after 0 usecs
calling dma_bus_init+0x0/0x32 @ 1
initcall dma_bus_init+0x0/0x32 returned 0 after 0 usecs
calling dma_channel_table_init+0x0/0xe6 @ 1
initcall dma_channel_table_init+0x0/0xe6 returned 0 after 0 usecs
calling dca_init+0x0/0x22 @ 1
dca service started, version 1.12.1
initcall dca_init+0x0/0x22 returned 0 after 0 usecs
calling pci_arch_init+0x0/0x47 @ 1
PCI: PCI BIOS revision 3.00 entry at 0xf21d0, last bus=5
initcall pci_arch_init+0x0/0x47 returned 0 after 9765 usecs
calling topology_init+0x0/0x13 @ 1
initcall topology_init+0x0/0x13 returned 0 after 0 usecs
calling param_sysfs_init+0x0/0x387 @ 1
initcall param_sysfs_init+0x0/0x387 returned 0 after 0 usecs
calling pm_sysrq_init+0x0/0x20 @ 1
initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
calling init_slow_work+0x0/0x2d @ 1
initcall init_slow_work+0x0/0x2d returned 0 after 0 usecs
calling default_bdi_init+0x0/0xae @ 1
initcall default_bdi_init+0x0/0xae returned 0 after 0 usecs
calling init_bio+0x0/0xe8 @ 1
bio: create slab <bio-0> at 0
initcall init_bio+0x0/0xe8 returned 0 after 0 usecs
calling fsnotify_init+0x0/0xf @ 1
initcall fsnotify_init+0x0/0xf returned 0 after 0 usecs
calling fsnotify_notification_init+0x0/0xe7 @ 1
initcall fsnotify_notification_init+0x0/0xe7 returned 0 after 0 usecs
calling cryptomgr_init+0x0/0xf @ 1
initcall cryptomgr_init+0x0/0xf returned 0 after 0 usecs
calling blk_settings_init+0x0/0x21 @ 1
initcall blk_settings_init+0x0/0x21 returned 0 after 0 usecs
calling blk_ioc_init+0x0/0x30 @ 1
initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs
calling blk_softirq_init+0x0/0x2a @ 1
initcall blk_softirq_init+0x0/0x2a returned 0 after 0 usecs
calling blk_iopoll_setup+0x0/0x2a @ 1
initcall blk_iopoll_setup+0x0/0x2a returned 0 after 0 usecs
calling genhd_device_init+0x0/0x50 @ 1
initcall genhd_device_init+0x0/0x50 returned 0 after 0 usecs
calling blk_dev_integrity_init+0x0/0x30 @ 1
initcall blk_dev_integrity_init+0x0/0x30 returned 0 after 0 usecs
calling gpiolib_debugfs_init+0x0/0x2b @ 1
initcall gpiolib_debugfs_init+0x0/0x2b returned 0 after 0 usecs
calling max7300_init+0x0/0x11 @ 1
i2c-core: driver [max7300] registered
initcall max7300_init+0x0/0x11 returned 0 after 0 usecs
calling max7301_init+0x0/0xf @ 1
initcall max7301_init+0x0/0xf returned 0 after 0 usecs
calling max732x_init+0x0/0x11 @ 1
i2c-core: driver [max732x] registered
initcall max732x_init+0x0/0x11 returned 0 after 0 usecs
calling mcp23s08_init+0x0/0xf @ 1
initcall mcp23s08_init+0x0/0xf returned 0 after 0 usecs
calling pca953x_init+0x0/0x11 @ 1
i2c-core: driver [pca953x] registered
initcall pca953x_init+0x0/0x11 returned 0 after 0 usecs
calling wm831x_gpio_init+0x0/0xf @ 1
initcall wm831x_gpio_init+0x0/0xf returned 0 after 0 usecs
calling wm8994_gpio_init+0x0/0xf @ 1
initcall wm8994_gpio_init+0x0/0xf returned 0 after 0 usecs
calling pci_slot_init+0x0/0x50 @ 1
initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
calling max8925_regulator_init+0x0/0xf @ 1
initcall max8925_regulator_init+0x0/0xf returned 0 after 0 usecs
calling wm8350_regulator_init+0x0/0xf @ 1
initcall wm8350_regulator_init+0x0/0xf returned 0 after 0 usecs
calling pcf50633_regulator_init+0x0/0xf @ 1
initcall pcf50633_regulator_init+0x0/0xf returned 0 after 0 usecs
calling pcap_regulator_init+0x0/0xf @ 1
initcall pcap_regulator_init+0x0/0xf returned 0 after 0 usecs
calling tps_65023_init+0x0/0x11 @ 1
i2c-core: driver [tps65023] registered
initcall tps_65023_init+0x0/0x11 returned 0 after 9765 usecs
calling tps6507x_pmic_init+0x0/0xf @ 1
initcall tps6507x_pmic_init+0x0/0xf returned 0 after 0 usecs
calling pm8607_regulator_init+0x0/0xf @ 1
initcall pm8607_regulator_init+0x0/0xf returned 0 after 0 usecs
calling misc_init+0x0/0xae @ 1
initcall misc_init+0x0/0xae returned 0 after 0 usecs
calling vga_arb_device_init+0x0/0x76 @ 1
vgaarb: loaded
initcall vga_arb_device_init+0x0/0x76 returned 0 after 0 usecs
calling cn_init+0x0/0x9e @ 1
initcall cn_init+0x0/0x9e returned 0 after 0 usecs
calling pm860x_i2c_init+0x0/0x31 @ 1
i2c-core: driver [88PM860x] registered
initcall pm860x_i2c_init+0x0/0x31 returned 0 after 0 usecs
calling wm831x_i2c_init+0x0/0x31 @ 1
i2c-core: driver [wm831x] registered
initcall wm831x_i2c_init+0x0/0x31 returned 0 after 0 usecs
calling wm8350_i2c_init+0x0/0x11 @ 1
i2c-core: driver [wm8350] registered
initcall wm8350_i2c_init+0x0/0x11 returned 0 after 9765 usecs
calling tps6507x_i2c_init+0x0/0x11 @ 1
i2c-core: driver [tps6507x] registered
initcall tps6507x_i2c_init+0x0/0x11 returned 0 after 9765 usecs
calling mc13783_init+0x0/0xf @ 1
initcall mc13783_init+0x0/0xf returned 0 after 0 usecs
calling ezx_pcap_init+0x0/0xf @ 1
initcall ezx_pcap_init+0x0/0xf returned 0 after 0 usecs
calling da903x_init+0x0/0x11 @ 1
i2c-core: driver [da903x] registered
initcall da903x_init+0x0/0x11 returned 0 after 9765 usecs
calling max8925_i2c_init+0x0/0x31 @ 1
i2c-core: driver [max8925] registered
initcall max8925_i2c_init+0x0/0x31 returned 0 after 9765 usecs
calling pcf50633_init+0x0/0x11 @ 1
i2c-core: driver [pcf50633] registered
initcall pcf50633_init+0x0/0x11 returned 0 after 0 usecs
calling ab3100_i2c_init+0x0/0x11 @ 1
i2c-core: driver [ab3100] registered
initcall ab3100_i2c_init+0x0/0x11 returned 0 after 0 usecs
calling ab8500_spi_init+0x0/0xf @ 1
initcall ab8500_spi_init+0x0/0xf returned 0 after 0 usecs
calling init_scsi+0x0/0x91 @ 1
SCSI subsystem initialized
initcall init_scsi+0x0/0x91 returned 0 after 0 usecs
calling ata_init+0x0/0x2bc @ 1
libata version 3.00 loaded.
initcall ata_init+0x0/0x2bc returned 0 after 0 usecs
calling phy_init+0x0/0x2b @ 1
initcall phy_init+0x0/0x2b returned 0 after 0 usecs
calling init_pcmcia_cs+0x0/0x2d @ 1
initcall init_pcmcia_cs+0x0/0x2d returned 0 after 0 usecs
calling nop_usb_xceiv_init+0x0/0xf @ 1
initcall nop_usb_xceiv_init+0x0/0xf returned 0 after 0 usecs
calling usb_init+0x0/0x143 @ 1
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall usb_init+0x0/0x143 returned 0 after 19531 usecs
calling serio_init+0x0/0x8d @ 1
initcall serio_init+0x0/0x8d returned 0 after 0 usecs
calling gameport_init+0x0/0x8d @ 1
initcall gameport_init+0x0/0x8d returned 0 after 0 usecs
calling input_init+0x0/0x128 @ 1
initcall input_init+0x0/0x128 returned 0 after 0 usecs
calling tca6416_keypad_init+0x0/0x11 @ 1
i2c-core: driver [tca6416-keypad] registered
initcall tca6416_keypad_init+0x0/0x11 returned 0 after 0 usecs
calling pps_init+0x0/0xa3 @ 1
LinuxPPS API ver. 1 registered
Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
initcall pps_init+0x0/0xa3 returned 0 after 9765 usecs
calling power_supply_class_init+0x0/0x39 @ 1
initcall power_supply_class_init+0x0/0x39 returned 0 after 0 usecs
calling hwmon_init+0x0/0x101 @ 1
initcall hwmon_init+0x0/0x101 returned 0 after 0 usecs
calling md_init+0x0/0xdf @ 1
initcall md_init+0x0/0xdf returned 0 after 0 usecs
calling mmc_init+0x0/0x7c @ 1
initcall mmc_init+0x0/0x7c returned 0 after 0 usecs
calling leds_init+0x0/0x3d @ 1
initcall leds_init+0x0/0x3d returned 0 after 0 usecs
calling init_soundcore+0x0/0x8f @ 1
initcall init_soundcore+0x0/0x8f returned 0 after 0 usecs
calling pci_subsys_init+0x0/0x48 @ 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:01.1: reg 10: [io 0xdc00-0xdc1f]
pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xda102000-0xda102fff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:04.0: reg 14: [io 0xd800-0xd8ff]
pci 0000:00:04.0: reg 18: [mem 0xda101000-0xda101fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f]
pci 0000:00:0a.0: reg 10: [mem 0xda100000-0xda100fff]
pci 0000:00:0a.0: reg 14: [io 0xd000-0xd007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:05:07.0: reg 10: [io 0xc000-0xc0ff]
pci 0000:05:07.0: reg 14: [mem 0xda000000-0xda0000ff]
pci 0000:05:07.0: supports D1 D2
pci 0000:05:07.0: PME# supported from D1 D2 D3hot
pci 0000:05:07.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xb000-0xb0ff]
pci 0000:01:00.0: reg 18: [mem 0xd9000000-0xd900ffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: reg 10: [mem 0xd9010000-0xd901ffff]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0e.0: PCI bridge to [bus 01-01]
pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:00.0: default IRQ router [10de:005e]
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000003fff0000 - 000000003fffffff initcall pci_subsys_init+0x0/0x48 returned 0 after 332031 usecs
calling proto_init+0x0/0xf @ 1
initcall proto_init+0x0/0xf returned 0 after 0 usecs
calling net_dev_init+0x0/0x125 @ 1
initcall net_dev_init+0x0/0x125 returned 0 after 0 usecs
calling neigh_init+0x0/0x7d @ 1
initcall neigh_init+0x0/0x7d returned 0 after 0 usecs
calling pktsched_init+0x0/0xe7 @ 1
initcall pktsched_init+0x0/0xe7 returned 0 after 0 usecs
calling tc_filter_init+0x0/0x53 @ 1
initcall tc_filter_init+0x0/0x53 returned 0 after 0 usecs
calling tc_action_init+0x0/0x53 @ 1
initcall tc_action_init+0x0/0x53 returned 0 after 0 usecs
calling genl_init+0x0/0x80 @ 1
initcall genl_init+0x0/0x80 returned 0 after 0 usecs
calling cipso_v4_init+0x0/0x55 @ 1
initcall cipso_v4_init+0x0/0x55 returned 0 after 0 usecs
calling wanrouter_init+0x0/0x5c @ 1
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
initcall wanrouter_init+0x0/0x5c returned 0 after 0 usecs
calling bt_init+0x0/0x54 @ 1
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
initcall bt_init+0x0/0x54 returned 0 after 19531 usecs
calling atm_init+0x0/0xd9 @ 1
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall atm_init+0x0/0xd9 returned 0 after 9765 usecs
calling wireless_nlevent_init+0x0/0xf @ 1
initcall wireless_nlevent_init+0x0/0xf returned 0 after 0 usecs
calling netlbl_init+0x0/0x7e @ 1
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
initcall netlbl_init+0x0/0x7e returned 0 after 9765 usecs
calling wpan_phy_class_init+0x0/0x33 @ 1
initcall wpan_phy_class_init+0x0/0x33 returned 0 after 0 usecs
calling sysctl_init+0x0/0xa8 @ 1
initcall sysctl_init+0x0/0xa8 returned 0 after 0 usecs
calling clocksource_done_booting+0x0/0x4f @ 1
Switching to clocksource tsc
initcall clocksource_done_booting+0x0/0x4f returned 0 after 0 usecs
calling ftrace_init_debugfs+0x0/0x151 @ 1
initcall ftrace_init_debugfs+0x0/0x151 returned 0 after 15 usecs
calling rb_init_debugfs+0x0/0x30 @ 1
initcall rb_init_debugfs+0x0/0x30 returned 0 after 1 usecs
calling tracer_init_debugfs+0x0/0x2dd @ 1
initcall tracer_init_debugfs+0x0/0x2dd returned 0 after 65 usecs
calling init_trace_printk_function_export+0x0/0x34 @ 1
initcall init_trace_printk_function_export+0x0/0x34 returned 0 after 1 usecs
calling event_trace_init+0x0/0x19a @ 1
initcall event_trace_init+0x0/0x19a returned 0 after 13361 usecs
calling init_pipe_fs+0x0/0x3d @ 1
initcall init_pipe_fs+0x0/0x3d returned 0 after 10 usecs
calling eventpoll_init+0x0/0xbe @ 1
initcall eventpoll_init+0x0/0xbe returned 0 after 4 usecs
calling anon_inode_init+0x0/0xfa @ 1
initcall anon_inode_init+0x0/0xfa returned 0 after 3 usecs
calling fscache_init+0x0/0xa6 @ 1
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
initcall fscache_init+0x0/0xa6 returned 0 after 7229 usecs
calling cachefiles_init+0x0/0x9a @ 1
CacheFiles: Loaded
initcall cachefiles_init+0x0/0x9a returned 0 after 1742 usecs
calling tomoyo_initerface_init+0x0/0x155 @ 1
initcall tomoyo_initerface_init+0x0/0x155 returned 0 after 23 usecs
calling blk_scsi_ioctl_init+0x0/0x288 @ 1
initcall blk_scsi_ioctl_init+0x0/0x288 returned 0 after 0 usecs
calling chr_dev_init+0x0/0xd0 @ 1
initcall chr_dev_init+0x0/0xd0 returned 0 after 103 usecs
calling firmware_class_init+0x0/0x14 @ 1
initcall firmware_class_init+0x0/0x14 returned 0 after 6 usecs
calling ieee1394_init+0x0/0x226 @ 1
initcall ieee1394_init+0x0/0x226 returned 0 after 65 usecs
calling init_pcmcia_bus+0x0/0x5f @ 1
initcall init_pcmcia_bus+0x0/0x5f returned 0 after 10 usecs
calling pcibios_assign_resources+0x0/0x6c @ 1
pci 0000:00:09.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:09.0: bridge window [mem 0xda000000-0xda0fffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 04-04]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem disabled]
pci 0000:00:0b.0: bridge window [mem pref disabled]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io disabled]
pci 0000:00:0c.0: bridge window [mem disabled]
pci 0000:00:0c.0: bridge window [mem pref disabled]
pci 0000:00:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:0d.0: bridge window [io disabled]
pci 0000:00:0d.0: bridge window [mem disabled]
pci 0000:00:0d.0: bridge window [mem pref disabled]
pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 01-01]
pci 0000:00:0e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0e.0: bridge window [mem 0xd8000000-0xd9ffffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xda000000-0xda0fffff]
pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref]
initcall pcibios_assign_resources+0x0/0x6c returned 0 after 157805 usecs
calling sysctl_core_init+0x0/0x2d @ 1
initcall sysctl_core_init+0x0/0x2d returned 0 after 6 usecs
calling inet_init+0x0/0x26c @ 1
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
initcall inet_init+0x0/0x26c returned 0 after 37180 usecs
calling af_unix_init+0x0/0x4e @ 1
NET: Registered protocol family 1
initcall af_unix_init+0x0/0x4e returned 0 after 2987 usecs
calling init_sunrpc+0x0/0x53 @ 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
initcall init_sunrpc+0x0/0x53 returned 0 after 11714 usecs
calling pci_apply_final_quirks+0x0/0x108 @ 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
initcall pci_apply_final_quirks+0x0/0x108 returned 0 after 23315 usecs
calling populate_rootfs+0x0/0x267 @ 1
initcall populate_rootfs+0x0/0x267 returned 0 after 60 usecs
calling pci_iommu_init+0x0/0x21 @ 1
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
initcall pci_iommu_init+0x0/0x21 returned 0 after 11984 usecs
calling irqfd_module_init+0x0/0x3e @ 1
initcall irqfd_module_init+0x0/0x3e returned 0 after 38 usecs
calling i8259A_init_sysfs+0x0/0x1d @ 1
initcall i8259A_init_sysfs+0x0/0x1d returned 0 after 24 usecs
calling sbf_init+0x0/0x109 @ 1
initcall sbf_init+0x0/0x109 returned 0 after 0 usecs
calling i8237A_init_sysfs+0x0/0x1d @ 1
initcall i8237A_init_sysfs+0x0/0x1d returned 0 after 11 usecs
calling add_rtc_cmos+0x0/0x48 @ 1
platform rtc_cmos: registered platform RTC device (no PNP device found)
initcall add_rtc_cmos+0x0/0x48 returned 0 after 6222 usecs
calling cache_sysfs_init+0x0/0x1f9 @ 1
initcall cache_sysfs_init+0x0/0x1f9 returned 0 after 0 usecs
calling mcheck_init_device+0x0/0x1d3 @ 1
initcall mcheck_init_device+0x0/0x1d3 returned -5 after 0 usecs
initcall mcheck_init_device+0x0/0x1d3 returned with error code -5
calling inject_init+0x0/0x30 @ 1
Machine check injector initialized
initcall inject_init+0x0/0x30 returned 0 after 3089 usecs
calling cpuid_init+0x0/0xe9 @ 1
initcall cpuid_init+0x0/0xe9 returned 0 after 30 usecs
calling add_pcspkr+0x0/0x2c @ 1
initcall add_pcspkr+0x0/0x2c returned 0 after 12 usecs
calling scx200_init+0x0/0x26 @ 1
scx200: NatSemi SCx200 Driver
initcall scx200_init+0x0/0x26 returned 0 after 2657 usecs
calling start_periodic_check_for_corruption+0x0/0x40 @ 1
Scanning for low memory corruption every 60 seconds
initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 4506 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 74 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned 0 after 14 usecs
calling proc_execdomains_init+0x0/0x28 @ 1
initcall proc_execdomains_init+0x0/0x28 returned 0 after 5 usecs
calling ioresources_init+0x0/0x45 @ 1
initcall ioresources_init+0x0/0x45 returned 0 after 2 usecs
calling uid_cache_init+0x0/0x8a @ 1
initcall uid_cache_init+0x0/0x8a returned 0 after 5 usecs
calling init_posix_timers+0x0/0x159 @ 1
initcall init_posix_timers+0x0/0x159 returned 0 after 1 usecs
calling init_posix_cpu_timers+0x0/0xb9 @ 1
initcall init_posix_cpu_timers+0x0/0xb9 returned 0 after 0 usecs
calling nsproxy_cache_init+0x0/0x33 @ 1
initcall nsproxy_cache_init+0x0/0x33 returned 0 after 0 usecs
calling timekeeping_init_device+0x0/0x1d @ 1
initcall timekeeping_init_device+0x0/0x1d returned 0 after 13 usecs
calling init_clocksource_sysfs+0x0/0x43 @ 1
initcall init_clocksource_sysfs+0x0/0x43 returned 0 after 13 usecs
calling init_timer_list_procfs+0x0/0x31 @ 1
initcall init_timer_list_procfs+0x0/0x31 returned 0 after 1 usecs
calling futex_init+0x0/0x53 @ 1
initcall futex_init+0x0/0x53 returned 0 after 5 usecs
calling proc_dma_init+0x0/0x28 @ 1
initcall proc_dma_init+0x0/0x28 returned 0 after 1 usecs
calling kallsyms_init+0x0/0x2b @ 1
initcall kallsyms_init+0x0/0x2b returned 0 after 0 usecs
calling crash_save_vmcoreinfo_init+0x0/0x4b5 @ 1
initcall crash_save_vmcoreinfo_init+0x0/0x4b5 returned 0 after 23 usecs
calling crash_notes_memory_init+0x0/0x36 @ 1
initcall crash_notes_memory_init+0x0/0x36 returned 0 after 0 usecs
calling utsname_sysctl_init+0x0/0x11 @ 1
initcall utsname_sysctl_init+0x0/0x11 returned 0 after 3 usecs
calling ftrace_nodyn_init+0x0/0x11 @ 1
initcall ftrace_nodyn_init+0x0/0x11 returned 0 after 0 usecs
calling init_events+0x0/0x60 @ 1
initcall init_events+0x0/0x60 returned 0 after 5 usecs
calling init_sched_switch_trace+0x0/0xf @ 1
initcall init_sched_switch_trace+0x0/0xf returned 0 after 9 usecs
calling init_function_trace+0x0/0xf @ 1
initcall init_function_trace+0x0/0xf returned 0 after 1 usecs
calling init_irqsoff_tracer+0x0/0x11 @ 1
initcall init_irqsoff_tracer+0x0/0x11 returned 0 after 1 usecs
calling init_wakeup_tracer+0x0/0x1d @ 1
initcall init_wakeup_tracer+0x0/0x1d returned 0 after 1 usecs
calling init_mmio_trace+0x0/0xf @ 1
initcall init_mmio_trace+0x0/0xf returned 0 after 1 usecs
calling init_graph_trace+0x0/0x6b @ 1
initcall init_graph_trace+0x0/0x6b returned 0 after 3 usecs
calling init_blk_tracer+0x0/0x57 @ 1
initcall init_blk_tracer+0x0/0x57 returned 0 after 1 usecs
calling perf_event_sysfs_init+0x0/0x14 @ 1
initcall perf_event_sysfs_init+0x0/0x14 returned 0 after 2 usecs
calling init_per_zone_wmark_min+0x0/0x5b @ 1
initcall init_per_zone_wmark_min+0x0/0x5b returned 0 after 28 usecs
calling kswapd_init+0x0/0x13 @ 1
initcall kswapd_init+0x0/0x13 returned 0 after 8 usecs
calling setup_vmstat+0x0/0x8b @ 1
initcall setup_vmstat+0x0/0x8b returned 0 after 4 usecs
calling mm_sysfs_init+0x0/0x22 @ 1
initcall mm_sysfs_init+0x0/0x22 returned 0 after 2 usecs
calling proc_vmalloc_init+0x0/0x2b @ 1
initcall proc_vmalloc_init+0x0/0x2b returned 0 after 1 usecs
calling init_emergency_pool+0x0/0x7f @ 1
initcall init_emergency_pool+0x0/0x7f returned 0 after 1 usecs
calling ksm_init+0x0/0x1e8 @ 1
initcall ksm_init+0x0/0x1e8 returned 0 after 24 usecs
calling fasync_init+0x0/0x30 @ 1
initcall fasync_init+0x0/0x30 returned 0 after 1 usecs
calling proc_filesystems_init+0x0/0x28 @ 1
initcall proc_filesystems_init+0x0/0x28 returned 0 after 1 usecs
calling dnotify_init+0x0/0x82 @ 1
initcall dnotify_init+0x0/0x82 returned 0 after 1 usecs
calling inotify_user_setup+0x0/0x79 @ 1
initcall inotify_user_setup+0x0/0x79 returned 0 after 1 usecs
calling aio_setup+0x0/0xad @ 1
initcall aio_setup+0x0/0xad returned 0 after 15 usecs
calling proc_locks_init+0x0/0x28 @ 1
initcall proc_locks_init+0x0/0x28 returned 0 after 1 usecs
calling init_mbcache+0x0/0x11 @ 1
initcall init_mbcache+0x0/0x11 returned 0 after 0 usecs
calling dquot_init+0x0/0x104 @ 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall dquot_init+0x0/0x104 returned 0 after 7676 usecs
calling proc_cmdline_init+0x0/0x28 @ 1
initcall proc_cmdline_init+0x0/0x28 returned 0 after 1 usecs
calling proc_cpuinfo_init+0x0/0x28 @ 1
initcall proc_cpuinfo_init+0x0/0x28 returned 0 after 1 usecs
calling proc_devices_init+0x0/0x28 @ 1
initcall proc_devices_init+0x0/0x28 returned 0 after 1 usecs
calling proc_interrupts_init+0x0/0x28 @ 1
initcall proc_interrupts_init+0x0/0x28 returned 0 after 1 usecs
calling proc_loadavg_init+0x0/0x28 @ 1
initcall proc_loadavg_init+0x0/0x28 returned 0 after 1 usecs
calling proc_meminfo_init+0x0/0x28 @ 1
initcall proc_meminfo_init+0x0/0x28 returned 0 after 1 usecs
calling proc_stat_init+0x0/0x28 @ 1
initcall proc_stat_init+0x0/0x28 returned 0 after 1 usecs
calling proc_uptime_init+0x0/0x28 @ 1
initcall proc_uptime_init+0x0/0x28 returned 0 after 1 usecs
calling proc_version_init+0x0/0x28 @ 1
initcall proc_version_init+0x0/0x28 returned 0 after 1 usecs
calling proc_softirqs_init+0x0/0x28 @ 1
initcall proc_softirqs_init+0x0/0x28 returned 0 after 1 usecs
calling proc_kmsg_init+0x0/0x2b @ 1
initcall proc_kmsg_init+0x0/0x2b returned 0 after 1 usecs
calling proc_page_init+0x0/0x4b @ 1
initcall proc_page_init+0x0/0x4b returned 0 after 2 usecs
calling configfs_init+0x0/0xc9 @ 1
initcall configfs_init+0x0/0xc9 returned 0 after 5 usecs
calling init_devpts_fs+0x0/0x3d @ 1
initcall init_devpts_fs+0x0/0x3d returned 0 after 9 usecs
calling init_ext3_fs+0x0/0x6b @ 1
initcall init_ext3_fs+0x0/0x6b returned 0 after 4 usecs
calling journal_init+0x0/0xd6 @ 1
initcall journal_init+0x0/0xd6 returned 0 after 16 usecs
calling journal_init+0x0/0xb5 @ 1
initcall journal_init+0x0/0xb5 returned 0 after 3 usecs
calling init_ramfs_fs+0x0/0xf @ 1
initcall init_ramfs_fs+0x0/0xf returned 0 after 0 usecs
calling init_fat_fs+0x0/0x4d @ 1
initcall init_fat_fs+0x0/0x4d returned 0 after 1 usecs
calling init_vfat_fs+0x0/0xf @ 1
initcall init_vfat_fs+0x0/0xf returned 0 after 0 usecs
calling init_msdos_fs+0x0/0xf @ 1
initcall init_msdos_fs+0x0/0xf returned 0 after 0 usecs
calling init_iso9660_fs+0x0/0x6b @ 1
initcall init_iso9660_fs+0x0/0x6b returned 0 after 10 usecs
calling init_nfsd+0x0/0xd5 @ 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
initcall init_nfsd+0x0/0xd5 returned 0 after 5040 usecs
calling init_nlm+0x0/0x1c @ 1
initcall init_nlm+0x0/0x1c returned 0 after 1 usecs
calling init_nls_cp437+0x0/0xf @ 1
initcall init_nls_cp437+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp737+0x0/0xf @ 1
initcall init_nls_cp737+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp852+0x0/0xf @ 1
initcall init_nls_cp852+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp855+0x0/0xf @ 1
initcall init_nls_cp855+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp861+0x0/0xf @ 1
initcall init_nls_cp861+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp862+0x0/0xf @ 1
initcall init_nls_cp862+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp949+0x0/0xf @ 1
initcall init_nls_cp949+0x0/0xf returned 0 after 0 usecs
calling init_nls_cp1251+0x0/0xf @ 1
initcall init_nls_cp1251+0x0/0xf returned 0 after 0 usecs
calling init_nls_ascii+0x0/0xf @ 1
initcall init_nls_ascii+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_2+0x0/0xf @ 1
initcall init_nls_iso8859_2+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_4+0x0/0xf @ 1
initcall init_nls_iso8859_4+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_6+0x0/0xf @ 1
initcall init_nls_iso8859_6+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_7+0x0/0xf @ 1
initcall init_nls_iso8859_7+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_9+0x0/0xf @ 1
initcall init_nls_iso8859_9+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_14+0x0/0xf @ 1
initcall init_nls_iso8859_14+0x0/0xf returned 0 after 0 usecs
calling init_nls_iso8859_15+0x0/0xf @ 1
initcall init_nls_iso8859_15+0x0/0xf returned 0 after 0 usecs
calling init_nls_koi8_r+0x0/0xf @ 1
initcall init_nls_koi8_r+0x0/0xf returned 0 after 0 usecs
calling init_nls_koi8_u+0x0/0xf @ 1
initcall init_nls_koi8_u+0x0/0xf returned 0 after 0 usecs
calling init_nls_koi8_ru+0x0/0x39 @ 1
initcall init_nls_koi8_ru+0x0/0x39 returned 0 after 0 usecs
calling init_nls_utf8+0x0/0x21 @ 1
initcall init_nls_utf8+0x0/0x21 returned 0 after 0 usecs
calling init_ncp_fs+0x0/0x5b @ 1
initcall init_ncp_fs+0x0/0x5b returned 0 after 1 usecs
calling init_ntfs_fs+0x0/0x1ca @ 1
NTFS driver 2.1.29 [Flags: R/O].
initcall init_ntfs_fs+0x0/0x1ca returned 0 after 2903 usecs
calling init_autofs4_fs+0x0/0x1e @ 1
initcall init_autofs4_fs+0x0/0x1e returned 0 after 17 usecs
calling init_jfs_fs+0x0/0x227 @ 1
JFS: nTxBlock = 7972, nTxLock = 63779
initcall init_jfs_fs+0x0/0x227 returned 0 after 6260 usecs
calling init_xfs_fs+0x0/0xb3 @ 1
SGI XFS with security attributes, debug enabled
SGI XFS Quota Management subsystem
initcall init_xfs_fs+0x0/0xb3 returned 0 after 7316 usecs
calling init_nilfs_fs+0x0/0xe2 @ 1
NILFS version 2 loaded
initcall init_nilfs_fs+0x0/0xe2 returned 0 after 2058 usecs
calling ocfs2_init+0x0/0x475 @ 1
OCFS2 1.5.0
initcall ocfs2_init+0x0/0x475 returned 0 after 1150 usecs
calling ocfs2_stack_glue_init+0x0/0x80 @ 1
initcall ocfs2_stack_glue_init+0x0/0x80 returned 0 after 9 usecs
calling o2cb_stack_init+0x0/0xf @ 1
ocfs2: Registered cluster interface o2cb
initcall o2cb_stack_init+0x0/0xf returned 0 after 3574 usecs
calling init_dlmfs_fs+0x0/0xd9 @ 1
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
initcall init_dlmfs_fs+0x0/0xd9 returned 0 after 5053 usecs
calling init_o2nm+0x0/0x99 @ 1
OCFS2 Node Manager 1.5.0
initcall init_o2nm+0x0/0x99 returned 0 after 2319 usecs
calling dlm_init+0x0/0x3a1 @ 1
OCFS2 DLM 1.5.0
initcall dlm_init+0x0/0x3a1 returned 0 after 1472 usecs
calling init_btrfs_fs+0x0/0x8a @ 1
Btrfs loaded
initcall init_btrfs_fs+0x0/0x8a returned 0 after 1234 usecs
calling init_ceph+0x0/0x178 @ 1
ceph: loaded (mon/mds/osd proto 15/32/24, osdmap 5/5 5/5)
initcall init_ceph+0x0/0x178 returned 0 after 5042 usecs
calling ipc_init+0x0/0x20 @ 1
msgmni has been set to 1993
initcall ipc_init+0x0/0x20 returned 0 after 2477 usecs
calling ipc_sysctl_init+0x0/0x11 @ 1
initcall ipc_sysctl_init+0x0/0x11 returned 0 after 1 usecs
calling init_mqueue_fs+0x0/0x96 @ 1
initcall init_mqueue_fs+0x0/0x96 returned 0 after 19 usecs
calling key_proc_init+0x0/0x38 @ 1
initcall key_proc_init+0x0/0x38 returned 0 after 1 usecs
calling crypto_wq_init+0x0/0x3b @ 1
initcall crypto_wq_init+0x0/0x3b returned 0 after 11 usecs
calling crypto_algapi_init+0x0/0xc @ 1
initcall crypto_algapi_init+0x0/0xc returned 0 after 2 usecs
calling skcipher_module_init+0x0/0x11 @ 1
initcall skcipher_module_init+0x0/0x11 returned 0 after 0 usecs
calling chainiv_module_init+0x0/0xf @ 1
initcall chainiv_module_init+0x0/0xf returned 0 after 1 usecs
calling eseqiv_module_init+0x0/0xf @ 1
initcall eseqiv_module_init+0x0/0xf returned 0 after 0 usecs
calling seqiv_module_init+0x0/0xf @ 1
initcall seqiv_module_init+0x0/0xf returned 0 after 0 usecs
calling hmac_module_init+0x0/0xf @ 1
initcall hmac_module_init+0x0/0xf returned 0 after 0 usecs
calling md4_mod_init+0x0/0xf @ 1
initcall md4_mod_init+0x0/0xf returned 0 after 62 usecs
calling md5_mod_init+0x0/0xf @ 1
initcall md5_mod_init+0x0/0xf returned 0 after 36 usecs
calling rmd128_mod_init+0x0/0xf @ 1
initcall rmd128_mod_init+0x0/0xf returned 0 after 47 usecs
calling rmd256_mod_init+0x0/0xf @ 1
initcall rmd256_mod_init+0x0/0xf returned 0 after 42 usecs
calling rmd320_mod_init+0x0/0xf @ 1
initcall rmd320_mod_init+0x0/0xf returned 0 after 43 usecs
calling sha1_generic_mod_init+0x0/0xf @ 1
initcall sha1_generic_mod_init+0x0/0xf returned 0 after 39 usecs
calling sha256_generic_mod_init+0x0/0x33 @ 1
initcall sha256_generic_mod_init+0x0/0x33 returned 0 after 66 usecs
calling sha512_generic_mod_init+0x0/0x33 @ 1
initcall sha512_generic_mod_init+0x0/0x33 returned 0 after 153 usecs
calling wp512_mod_init+0x0/0x59 @ 1
initcall wp512_mod_init+0x0/0x59 returned 0 after 399 usecs
calling crypto_ecb_module_init+0x0/0xf @ 1
initcall crypto_ecb_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_cbc_module_init+0x0/0xf @ 1
initcall crypto_cbc_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_pcbc_module_init+0x0/0xf @ 1
initcall crypto_pcbc_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_cts_module_init+0x0/0xf @ 1
initcall crypto_cts_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_module_init+0x0/0xf @ 1
initcall crypto_module_init+0x0/0xf returned 0 after 0 usecs
calling crypto_ctr_module_init+0x0/0x35 @ 1
initcall crypto_ctr_module_init+0x0/0x35 returned 0 after 0 usecs
calling des_generic_mod_init+0x0/0x33 @ 1
initcall des_generic_mod_init+0x0/0x33 returned 0 after 76 usecs
calling fcrypt_mod_init+0x0/0xf @ 1
alg: No test for fcrypt (fcrypt-generic)
initcall fcrypt_mod_init+0x0/0xf returned 0 after 3601 usecs
calling twofish_mod_init+0x0/0xf @ 1
initcall twofish_mod_init+0x0/0xf returned 0 after 109 usecs
calling aes_init+0x0/0xf @ 1
initcall aes_init+0x0/0xf returned 0 after 50 usecs
calling camellia_init+0x0/0xf @ 1
initcall camellia_init+0x0/0xf returned 0 after 40 usecs
calling cast6_mod_init+0x0/0xf @ 1
initcall cast6_mod_init+0x0/0xf returned 0 after 41 usecs
calling arc4_init+0x0/0xf @ 1
initcall arc4_init+0x0/0xf returned 0 after 69 usecs
calling salsa20_generic_mod_init+0x0/0xf @ 1
initcall salsa20_generic_mod_init+0x0/0xf returned 0 after 13 usecs
calling zlib_mod_init+0x0/0xf @ 1
initcall zlib_mod_init+0x0/0xf returned 0 after 661 usecs
calling michael_mic_init+0x0/0xf @ 1
initcall michael_mic_init+0x0/0xf returned 0 after 34 usecs
calling crc32c_mod_init+0x0/0xf @ 1
initcall crc32c_mod_init+0x0/0xf returned 0 after 52 usecs
calling lzo_mod_init+0x0/0xf @ 1
initcall lzo_mod_init+0x0/0xf returned 0 after 34 usecs
calling krng_mod_init+0x0/0xf @ 1
alg: No test for stdrng (krng)
initcall krng_mod_init+0x0/0xf returned 0 after 2744 usecs
calling prng_mod_init+0x0/0x1d @ 1
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
initcall prng_mod_init+0x0/0x1d returned 0 after 11543 usecs
calling ghash_mod_init+0x0/0xf @ 1
initcall ghash_mod_init+0x0/0xf returned 0 after 40 usecs
calling proc_genhd_init+0x0/0x45 @ 1
initcall proc_genhd_init+0x0/0x45 returned 0 after 8 usecs
calling bsg_init+0x0/0x11b @ 1
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
initcall bsg_init+0x0/0x11b returned 0 after 5971 usecs
calling noop_init+0x0/0x11 @ 1
io scheduler noop registered
initcall noop_init+0x0/0x11 returned 0 after 2559 usecs
calling cfq_init+0x0/0x9f @ 1
io scheduler cfq registered (default)
initcall cfq_init+0x0/0x9f returned 0 after 3331 usecs
calling libcrc32c_mod_init+0x0/0x25 @ 1
initcall libcrc32c_mod_init+0x0/0x25 returned 0 after 1 usecs
calling init_kmp+0x0/0xf @ 1
initcall init_kmp+0x0/0xf returned 0 after 0 usecs
calling init_bm+0x0/0xf @ 1
initcall init_bm+0x0/0xf returned 0 after 0 usecs
calling init_fsm+0x0/0xf @ 1
initcall init_fsm+0x0/0xf returned 0 after 0 usecs
calling adp5520_gpio_init+0x0/0xf @ 1
initcall adp5520_gpio_init+0x0/0xf returned 0 after 15 usecs
calling adp5588_gpio_init+0x0/0x11 @ 1
i2c-core: driver [adp5588-gpio] registered
initcall adp5588_gpio_init+0x0/0x11 returned 0 after 3763 usecs
calling cs5535_gpio_init+0x0/0x1d3 @ 1
initcall cs5535_gpio_init+0x0/0x1d3 returned -19 after 11 usecs
calling rdc321x_gpio_init+0x0/0xf @ 1
initcall rdc321x_gpio_init+0x0/0xf returned 0 after 8 usecs
calling pci_proc_init+0x0/0x65 @ 1
initcall pci_proc_init+0x0/0x65 returned 0 after 43 usecs
calling pcie_portdrv_init+0x0/0x52 @ 1
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0e.0: setting latency timer to 64
initcall pcie_portdrv_init+0x0/0x52 returned 0 after 17825 usecs
calling aer_service_init+0x0/0xa @ 1
initcall aer_service_init+0x0/0xa returned -6 after 0 usecs
initcall aer_service_init+0x0/0xa returned with error code -6
calling aer_inject_init+0x0/0xf @ 1
initcall aer_inject_init+0x0/0xf returned 0 after 18 usecs
calling l4f00242t03_init+0x0/0xf @ 1
initcall l4f00242t03_init+0x0/0xf returned 0 after 8 usecs
calling lms283gf05_init+0x0/0xf @ 1
initcall lms283gf05_init+0x0/0xf returned 0 after 7 usecs
calling ltv350qv_init+0x0/0xf @ 1
initcall ltv350qv_init+0x0/0xf returned 0 after 7 usecs
calling s6e63m0_init+0x0/0xf @ 1
initcall s6e63m0_init+0x0/0xf returned 0 after 7 usecs
calling da903x_backlight_init+0x0/0xf @ 1
initcall da903x_backlight_init+0x0/0xf returned 0 after 9 usecs
calling kb3886_init+0x0/0x33 @ 1
initcall kb3886_init+0x0/0x33 returned -19 after 0 usecs
calling adp8860_init+0x0/0x11 @ 1
i2c-core: driver [adp8860_bl] registered
initcall adp8860_init+0x0/0x11 returned 0 after 3584 usecs
calling pcf50633_bl_init+0x0/0xf @ 1
initcall pcf50633_bl_init+0x0/0xf returned 0 after 8 usecs
calling regulator_userspace_consumer_init+0x0/0xf @ 1
initcall regulator_userspace_consumer_init+0x0/0xf returned 0 after 9 usecs
calling rand_initialize+0x0/0x30 @ 1
initcall rand_initialize+0x0/0x30 returned 0 after 28 usecs
calling tty_init+0x0/0x105 @ 1
initcall tty_init+0x0/0x105 returned 0 after 869 usecs
calling pty_init+0x0/0x439 @ 1
initcall pty_init+0x0/0x439 returned 0 after 13159 usecs
calling sysrq_init+0x0/0x7b @ 1
initcall sysrq_init+0x0/0x7b returned 0 after 4 usecs
calling nozomi_init+0x0/0xfc @ 1
Initializing Nozomi driver 2.1d (build date: Sep 3 2010 18:18:05)
initcall nozomi_init+0x0/0xfc returned 0 after 5794 usecs
calling epca_module_init+0x0/0x3d2 @ 1
DIGI epca driver version 1.3.0.1-LK2.6 loaded.
initcall epca_module_init+0x0/0x3d2 returned 0 after 34304 usecs
calling mxser_module_init+0x0/0x5b9 @ 1
MOXA Smartio/Industio family driver version 2.0.5
initcall mxser_module_init+0x0/0x5b9 returned 0 after 4354 usecs
calling ip2_loadmain+0x0/0x1309 @ 1
Computone IntelliPort Plus multiport driver version 1.2.14
initcall ip2_loadmain+0x0/0x1309 returned 0 after 5121 usecs
calling riscom8_init_module+0x0/0x428 @ 1
rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996.
rc0: RISCom/8 Board at 0x220 not found.
rc1: RISCom/8 Board at 0x240 not found.
rc2: RISCom/8 Board at 0x250 not found.
rc3: RISCom/8 Board at 0x260 not found.
rc: No RISCom/8 boards detected.
initcall riscom8_init_module+0x0/0x428 returned -5 after 30761 usecs
initcall riscom8_init_module+0x0/0x428 returned with error code -5
calling isicom_init+0x0/0x151 @ 1
initcall isicom_init+0x0/0x151 returned 0 after 23 usecs
calling synclink_init+0x0/0x235 @ 1
SyncLink serial driver $Revision: 4.38 $
SyncLink serial driver $Revision: 4.38 $, tty major#251
initcall synclink_init+0x0/0x235 returned 0 after 18736 usecs
calling slgt_init+0x0/0x186 @ 1
SyncLink GT
SyncLink GT, tty major#250
SyncLink GT no devices found
initcall slgt_init+0x0/0x186 returned 0 after 6093 usecs
calling n_hdlc_init+0x0/0x90 @ 1
HDLC line discipline maxframe=4096
N_HDLC line discipline registered.
initcall n_hdlc_init+0x0/0x90 returned 0 after 6126 usecs
calling raw_init+0x0/0xdf @ 1
initcall raw_init+0x0/0xdf returned 0 after 54 usecs
calling applicom_init+0x0/0x496 @ 1
Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
ac.o: No PCI boards found.
ac.o: For an ISA board you must supply memory and irq parameters.
initcall applicom_init+0x0/0x496 returned -6 after 13768 usecs
initcall applicom_init+0x0/0x496 returned with error code -6
calling sonypi_init+0x0/0x80 @ 1
sonypi: Sony Programmable I/O Controller Driver v1.26.
initcall sonypi_init+0x0/0x80 returned -19 after 4758 usecs
calling rtc_init+0x0/0x1d5 @ 1
Real Time Clock Driver v1.12b
initcall rtc_init+0x0/0x1d5 returned 0 after 2707 usecs
calling i8k_init+0x0/0x2df @ 1
initcall i8k_init+0x0/0x2df returned -19 after 3 usecs
calling timeriomem_rng_init+0x0/0xf @ 1
initcall timeriomem_rng_init+0x0/0xf returned 0 after 12 usecs
calling mod_init+0x0/0x226 @ 1
initcall mod_init+0x0/0x226 returned -19 after 79 usecs
calling mod_init+0x0/0xa6 @ 1
initcall mod_init+0x0/0xa6 returned -19 after 15 usecs
calling nsc_gpio_init+0x0/0x17 @ 1
nsc_gpio initializing
initcall nsc_gpio_init+0x0/0x17 returned 0 after 1965 usecs
calling agp_init+0x0/0x30 @ 1
Linux agpgart interface v0.103
initcall agp_init+0x0/0x30 returned 0 after 2729 usecs
calling agp_ali_init+0x0/0x24 @ 1
initcall agp_ali_init+0x0/0x24 returned 0 after 15 usecs
calling agp_ati_init+0x0/0x24 @ 1
initcall agp_ati_init+0x0/0x24 returned 0 after 11 usecs
calling agp_amdk7_init+0x0/0x24 @ 1
initcall agp_amdk7_init+0x0/0x24 returned 0 after 11 usecs
calling agp_intel_init+0x0/0x24 @ 1
initcall agp_intel_init+0x0/0x24 returned 0 after 15 usecs
calling agp_serverworks_init+0x0/0x24 @ 1
initcall agp_serverworks_init+0x0/0x24 returned 0 after 12 usecs
calling cm4040_init+0x0/0xbd @ 1
OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte
initcall cm4040_init+0x0/0xbd returned 0 after 5534 usecs
calling ipmi_init_msghandler_mod+0x0/0xc @ 1
ipmi message handler version 39.2
initcall ipmi_init_msghandler_mod+0x0/0xc returned 0 after 2994 usecs
calling init_ipmi_si+0x0/0x640 @ 1
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
initcall init_ipmi_si+0x0/0x640 returned -19 after 55277 usecs
calling ipmi_wdog_init+0x0/0x113 @ 1
IPMI Watchdog: driver initialized
initcall ipmi_wdog_init+0x0/0x113 returned 0 after 2984 usecs
calling ipmi_poweroff_init+0x0/0x80 @ 1
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
initcall ipmi_poweroff_init+0x0/0x80 returned 0 after 6202 usecs
calling hangcheck_init+0x0/0xaa @ 1
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
initcall hangcheck_init+0x0/0xaa returned 0 after 10622 usecs
calling init_tis+0x0/0x452 @ 1
tpm_tis tpm_tis: 1.2 TPM (device-id 0xFFFF, rev-id 255)
tpm_tis tpm_tis: Unable to request irq: 255 for use
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
initcall init_tis+0x0/0x452 returned 0 after 24608 usecs
calling drm_core_init+0x0/0x12d @ 1
[drm] Initialized drm 1.1.0 20060810
initcall drm_core_init+0x0/0x12d returned 0 after 3264 usecs
calling tdfx_init+0x0/0xf @ 1
initcall tdfx_init+0x0/0xf returned 0 after 17 usecs
calling mga_init+0x0/0x19 @ 1
initcall mga_init+0x0/0x19 returned 0 after 11 usecs
calling sis_init+0x0/0x19 @ 1
initcall sis_init+0x0/0x19 returned 0 after 21 usecs
calling savage_init+0x0/0x19 @ 1
initcall savage_init+0x0/0x19 returned 0 after 60 usecs
calling via_init+0x0/0x1e @ 1
initcall via_init+0x0/0x1e returned 0 after 26 usecs
calling cn_proc_init+0x0/0x34 @ 1
initcall cn_proc_init+0x0/0x34 returned 0 after 1 usecs
calling serial8250_init+0x0/0x156 @ 1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
async_waiting @ 1
async_continuing @ 1 after 0 usec
async_waiting @ 1
async_continuing @ 1 after 0 usec
ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
initcall serial8250_init+0x0/0x156 returned 0 after 282289 usecs
calling init_serial_cs+0x0/0xf @ 1
initcall init_serial_cs+0x0/0xf returned 0 after 30 usecs
calling timbuart_init+0x0/0xf @ 1
initcall timbuart_init+0x0/0xf returned 0 after 9 usecs
calling brd_init+0x0/0x165 @ 1
brd: module loaded
initcall brd_init+0x0/0x165 returned 0 after 2535 usecs
calling cpqarray_init+0x0/0x286 @ 1
Compaq SMART2 Driver (v 2.6.0)
initcall cpqarray_init+0x0/0x286 returned -19 after 2752 usecs
calling cciss_init+0x0/0x90 @ 1
HP CISS Driver (v 3.6.20)
initcall cciss_init+0x0/0x90 returned 0 after 2358 usecs
calling DAC960_init_module+0x0/0x48 @ 1
initcall DAC960_init_module+0x0/0x48 returned 0 after 78 usecs
calling mm_init+0x0/0x140 @ 1
MM: desc_per_page = 128
initcall mm_init+0x0/0x140 returned 0 after 2152 usecs
calling nbd_init+0x0/0x24e @ 1
nbd: registered device at major 43
initcall nbd_init+0x0/0x24e returned 0 after 4033 usecs
calling carm_init+0x0/0x16 @ 1
initcall carm_init+0x0/0x16 returned 0 after 13 usecs
calling lkdtm_module_init+0x0/0x1a1 @ 1
lkdtm: No crash points registered, enable through debugfs
initcall lkdtm_module_init+0x0/0x1a1 returned 0 after 5012 usecs
calling sm501_base_init+0x0/0x20 @ 1
initcall sm501_base_init+0x0/0x20 returned 0 after 24 usecs
calling htcpld_core_init+0x0/0x24 @ 1
i2c-core: driver [htcpld-chip] registered
initcall htcpld_core_init+0x0/0x24 returned -19 after 3692 usecs
calling wm8994_i2c_init+0x0/0x31 @ 1
i2c-core: driver [wm8994] registered
initcall wm8994_i2c_init+0x0/0x31 returned 0 after 3244 usecs
calling adp5520_init+0x0/0x11 @ 1
i2c-core: driver [adp5520] registered
initcall adp5520_init+0x0/0x11 returned 0 after 3329 usecs
calling lpc_sch_init+0x0/0x16 @ 1
initcall lpc_sch_init+0x0/0x16 returned 0 after 13 usecs
calling rdc321x_sb_init+0x0/0x16 @ 1
initcall rdc321x_sb_init+0x0/0x16 returned 0 after 13 usecs
calling mac_hid_init+0x0/0x1c @ 1
initcall mac_hid_init+0x0/0x1c returned 0 after 5 usecs
calling scsi_tgt_init+0x0/0x8f @ 1
initcall scsi_tgt_init+0x0/0x8f returned 0 after 272 usecs
calling raid_init+0x0/0xf @ 1
initcall raid_init+0x0/0xf returned 0 after 13 usecs
calling spi_transport_init+0x0/0x77 @ 1
initcall spi_transport_init+0x0/0x77 returned 0 after 14 usecs
calling fc_transport_init+0x0/0x71 @ 1
initcall fc_transport_init+0x0/0x71 returned 0 after 26 usecs
calling iscsi_transport_init+0x0/0x145 @ 1
Loading iSCSI transport class v2.0-870.
initcall iscsi_transport_init+0x0/0x145 returned 0 after 3541 usecs
calling sas_transport_init+0x0/0x9f @ 1
initcall sas_transport_init+0x0/0x9f returned 0 after 39 usecs
calling sas_class_init+0x0/0x36 @ 1
initcall sas_class_init+0x0/0x36 returned 0 after 4 usecs
calling srp_transport_init+0x0/0x33 @ 1
initcall srp_transport_init+0x0/0x33 returned 0 after 13 usecs
calling libfc_init+0x0/0x3a @ 1
initcall libfc_init+0x0/0x3a returned 0 after 24 usecs
calling fnic_init_module+0x0/0x1c3 @ 1
fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
initcall fnic_init_module+0x0/0x1c3 returned 0 after 3789 usecs
calling advansys_init+0x0/0x16 @ 1
initcall advansys_init+0x0/0x16 returned 0 after 14 usecs
calling adpt_init+0x0/0xf2c @ 1
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
initcall adpt_init+0x0/0xf2c returned -19 after 7827 usecs
calling ahc_linux_init+0x0/0x5c @ 1
initcall ahc_linux_init+0x0/0x5c returned 0 after 22 usecs
calling ahd_linux_init+0x0/0x6c @ 1
initcall ahd_linux_init+0x0/0x6c returned 0 after 25 usecs
calling aic94xx_init+0x0/0x12e @ 1
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
initcall aic94xx_init+0x0/0x12e returned 0 after 5379 usecs
calling pm8001_init+0x0/0x4c @ 1
initcall pm8001_init+0x0/0x4c returned 0 after 14 usecs
calling ips_module_init+0x0/0x3ad @ 1
initcall ips_module_init+0x0/0x3ad returned -19 after 22 usecs
calling qla1280_init+0x0/0x16 @ 1
initcall qla1280_init+0x0/0x16 returned 0 after 14 usecs
calling qla4xxx_module_init+0x0/0xcb @ 1
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
initcall qla4xxx_module_init+0x0/0xcb returned 0 after 5488 usecs
calling lpfc_init+0x0/0xb7 @ 1
Emulex LightPulse Fibre Channel SCSI driver 8.3.12
Copyright(c) 2004-2009 Emulex. All rights reserved.
initcall lpfc_init+0x0/0xb7 returned 0 after 9035 usecs
calling hpsa_init+0x0/0x16 @ 1
initcall hpsa_init+0x0/0x16 returned 0 after 17 usecs
calling atp870u_init+0x0/0x16 @ 1
initcall atp870u_init+0x0/0x16 returned 0 after 14 usecs
calling gdth_init+0x0/0xe7 @ 1
GDT-HA: Storage RAID Controller Driver. Version: 3.05
initcall gdth_init+0x0/0xe7 returned 0 after 4692 usecs
calling initio_init_driver+0x0/0x16 @ 1
initcall initio_init_driver+0x0/0x16 returned 0 after 13 usecs
calling tw_init+0x0/0x2e @ 1
3ware Storage Controller device driver for Linux v1.26.02.003.
initcall tw_init+0x0/0x2e returned 0 after 5445 usecs
calling twa_init+0x0/0x2e @ 1
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
initcall twa_init+0x0/0x2e returned 0 after 5875 usecs
calling init_nsp32+0x0/0x3e @ 1
nsp32: loading...
initcall init_nsp32+0x0/0x3e returned 0 after 1642 usecs
calling hptiop_module_init+0x0/0x36 @ 1
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
initcall hptiop_module_init+0x0/0x36 returned 0 after 4604 usecs
calling mvs_init+0x0/0x42 @ 1
initcall mvs_init+0x0/0x42 returned 0 after 15 usecs
calling bnx2i_mod_init+0x0/0xb0 @ 1
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.1 (Mar 24, 2010)
iscsi: registered transport (bnx2i)
initcall bnx2i_mod_init+0x0/0xb0 returned 0 after 8607 usecs
calling beiscsi_module_init+0x0/0x9c @ 1
iscsi: registered transport (be2iscsi)
initcall beiscsi_module_init+0x0/0x9c returned 0 after 3427 usecs
calling pmcraid_init+0x0/0x126 @ 1
initcall pmcraid_init+0x0/0x126 returned 0 after 26 usecs
calling pvscsi_init+0x0/0x36 @ 1
VMware PVSCSI driver - version 1.0.1.0-k
initcall pvscsi_init+0x0/0x36 returned 0 after 3587 usecs
calling init_sd+0x0/0x130 @ 1
initcall init_sd+0x0/0x130 returned 0 after 28 usecs
calling init_sg+0x0/0x112 @ 1
initcall init_sg+0x0/0x112 returned 0 after 21 usecs
calling ahci_init+0x0/0x16 @ 1
initcall ahci_init+0x0/0x16 returned 0 after 27 usecs
calling inic_init+0x0/0x16 @ 1
initcall inic_init+0x0/0x16 returned 0 after 13 usecs
calling adma_ata_init+0x0/0x16 @ 1
initcall adma_ata_init+0x0/0x16 returned 0 after 12 usecs
calling piix_init+0x0/0x24 @ 1
initcall piix_init+0x0/0x24 returned 0 after 17 usecs
calling mv_init+0x0/0x3a @ 1
initcall mv_init+0x0/0x3a returned 0 after 25 usecs
calling nv_init+0x0/0x16 @ 1
initcall nv_init+0x0/0x16 returned 0 after 17 usecs
calling pdc_ata_init+0x0/0x16 @ 1
initcall pdc_ata_init+0x0/0x16 returned 0 after 15 usecs
calling uli_init+0x0/0x16 @ 1
initcall uli_init+0x0/0x16 returned 0 after 13 usecs
calling ali_init+0x0/0x40 @ 1
initcall ali_init+0x0/0x40 returned 0 after 16 usecs
calling amd_init+0x0/0x16 @ 1
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
initcall amd_init+0x0/0x16 returned 0 after 22046 usecs
calling atiixp_init+0x0/0x16 @ 1
initcall atiixp_init+0x0/0x16 returned 0 after 14 usecs
calling cs5520_init+0x0/0x16 @ 1
initcall cs5520_init+0x0/0x16 returned 0 after 13 usecs
calling cs5536_init+0x0/0x16 @ 1
initcall cs5536_init+0x0/0x16 returned 0 after 13 usecs
calling cy82c693_init+0x0/0x16 @ 1
initcall cy82c693_init+0x0/0x16 returned 0 after 13 usecs
calling hpt36x_init+0x0/0x16 @ 1
initcall hpt36x_init+0x0/0x16 returned 0 after 18 usecs
calling hpt37x_init+0x0/0x16 @ 1
initcall hpt37x_init+0x0/0x16 returned 0 after 14 usecs
calling hpt3x2n_init+0x0/0x16 @ 1
initcall hpt3x2n_init+0x0/0x16 returned 0 after 14 usecs
calling it8213_init+0x0/0x16 @ 1
initcall it8213_init+0x0/0x16 returned 0 after 14 usecs
calling netcell_init+0x0/0x16 @ 1
initcall netcell_init+0x0/0x16 returned 0 after 16 usecs
calling ns87415_init+0x0/0x16 @ 1
initcall ns87415_init+0x0/0x16 returned 0 after 14 usecs
calling oldpiix_init+0x0/0x16 @ 1
initcall oldpiix_init+0x0/0x16 returned 0 after 13 usecs
calling radisys_init+0x0/0x16 @ 1
initcall radisys_init+0x0/0x16 returned 0 after 14 usecs
calling rdc_init+0x0/0x16 @ 1
initcall rdc_init+0x0/0x16 returned 0 after 14 usecs
calling sc1200_init+0x0/0x16 @ 1
initcall sc1200_init+0x0/0x16 returned 0 after 13 usecs
calling serverworks_init+0x0/0x16 @ 1
initcall serverworks_init+0x0/0x16 returned 0 after 15 usecs
calling via_init+0x0/0x16 @ 1
initcall via_init+0x0/0x16 returned 0 after 15 usecs
calling sl82c105_init+0x0/0x16 @ 1
initcall sl82c105_init+0x0/0x16 returned 0 after 14 usecs
calling ns87410_init+0x0/0x16 @ 1
initcall ns87410_init+0x0/0x16 returned 0 after 14 usecs
calling pata_platform_init+0x0/0xf @ 1
initcall pata_platform_init+0x0/0xf returned 0 after 9 usecs
calling rz1000_init+0x0/0x16 @ 1
initcall rz1000_init+0x0/0x16 returned 0 after 15 usecs
calling ata_generic_init+0x0/0x16 @ 1
initcall ata_generic_init+0x0/0x16 returned 0 after 15 usecs
calling spi_gpio_init+0x0/0x14 @ 1
initcall spi_gpio_init+0x0/0x14 returned -19 after 15 usecs
calling tle62x0_init+0x0/0xf @ 1
initcall tle62x0_init+0x0/0xf returned 0 after 9 usecs
calling davicom_init+0x0/0x4d @ 1
initcall davicom_init+0x0/0x4d returned 0 after 25 usecs
calling qs6612_init+0x0/0xf @ 1
initcall qs6612_init+0x0/0xf returned 0 after 7 usecs
calling smsc_init+0x0/0x81 @ 1
initcall smsc_init+0x0/0x81 returned 0 after 38 usecs
calling vsc82xx_init+0x0/0x33 @ 1
initcall vsc82xx_init+0x0/0x33 returned 0 after 17 usecs
calling realtek_init+0x0/0xf @ 1
initcall realtek_init+0x0/0xf returned 0 after 7 usecs
calling et1011c_init+0x0/0xf @ 1
initcall et1011c_init+0x0/0xf returned 0 after 7 usecs
calling mdio_gpio_init+0x0/0xf @ 1
initcall mdio_gpio_init+0x0/0xf returned 0 after 9 usecs
calling e1000_init_module+0x0/0x82 @ 1
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
initcall e1000_init_module+0x0/0x82 returned 0 after 9957 usecs
calling e1000_init_module+0x0/0x3a @ 1
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
initcall e1000_init_module+0x0/0x3a returned 0 after 9114 usecs
calling igb_init_module+0x0/0x4a @ 1
Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2
Copyright (c) 2007-2009 Intel Corporation.
initcall igb_init_module+0x0/0x4a returned 0 after 8942 usecs
calling igbvf_init_module+0x0/0x66 @ 1
Intel(R) Virtual Function Network Driver - version 1.0.0-k0
Copyright (c) 2009 Intel Corporation.
initcall igbvf_init_module+0x0/0x66 returned 0 after 8519 usecs
calling ipg_init_module+0x0/0x16 @ 1
initcall ipg_init_module+0x0/0x16 returned 0 after 15 usecs
calling t1_init_module+0x0/0x16 @ 1
initcall t1_init_module+0x0/0x16 returned 0 after 14 usecs
calling cxgb3_init_module+0x0/0x1b @ 1
initcall cxgb3_init_module+0x0/0x1b returned 0 after 18 usecs
calling cxgb4_init_module+0x0/0x50 @ 1
initcall cxgb4_init_module+0x0/0x50 returned 0 after 20 usecs
calling vcan_init_module+0x0/0x34 @ 1
vcan: Virtual CAN interface driver
initcall vcan_init_module+0x0/0x34 returned 0 after 3066 usecs
calling can_dev_init+0x0/0x2a @ 1
CAN device driver interface
initcall can_dev_init+0x0/0x2a returned 0 after 2471 usecs
calling ems_usb_init+0x0/0x42 @ 1
CPC-USB kernel driver loaded
usbcore: registered new interface driver ems_usb
initcall ems_usb_init+0x0/0x42 returned 0 after 6818 usecs
calling sja1000_init+0x0/0x1f @ 1
sja1000 CAN netdevice driver
initcall sja1000_init+0x0/0x1f returned 0 after 2559 usecs
calling ems_pci_init+0x0/0x16 @ 1
initcall ems_pci_init+0x0/0x16 returned 0 after 13 usecs
calling kvaser_pci_init+0x0/0x16 @ 1
initcall kvaser_pci_init+0x0/0x16 returned 0 after 13 usecs
calling mcp251x_can_init+0x0/0xf @ 1
initcall mcp251x_can_init+0x0/0xf returned 0 after 7 usecs
calling atl1e_init_module+0x0/0x16 @ 1
initcall atl1e_init_module+0x0/0x16 returned 0 after 13 usecs
calling atl1c_init_module+0x0/0x16 @ 1
initcall atl1c_init_module+0x0/0x16 returned 0 after 14 usecs
calling enic_init_module+0x0/0x36 @ 1
enic: Cisco VIC Ethernet NIC Driver, ver 1.3.1.1-pp
initcall enic_init_module+0x0/0x36 returned 0 after 4521 usecs
calling vmxnet3_init_module+0x0/0x36 @ 1
VMware vmxnet3 virtual NIC driver - version 1.0.5.0-k-NAPI
initcall vmxnet3_init_module+0x0/0x36 returned 0 after 5111 usecs
calling happy_meal_probe+0x0/0x16 @ 1
initcall happy_meal_probe+0x0/0x16 returned 0 after 13 usecs
calling vortex_init+0x0/0xa0 @ 1
initcall vortex_init+0x0/0xa0 returned 0 after 16 usecs
calling e100_init_module+0x0/0x5b @ 1
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
initcall e100_init_module+0x0/0x5b returned 0 after 8775 usecs
calling tlan_probe+0x0/0xe2 @ 1
ThunderLAN driver v1.15a
TLAN: 0 devices installed, PCI: 0 EISA: 0
initcall tlan_probe+0x0/0xe2 returned -19 after 5988 usecs
calling smsc9420_init_module+0x0/0x38 @ 1
initcall smsc9420_init_module+0x0/0x38 returned 0 after 14 usecs
calling sis900_init_module+0x0/0x16 @ 1
initcall sis900_init_module+0x0/0x16 returned 0 after 16 usecs
calling r6040_init+0x0/0x16 @ 1
initcall r6040_init+0x0/0x16 returned 0 after 14 usecs
calling yellowfin_init+0x0/0x16 @ 1
initcall yellowfin_init+0x0/0x16 returned 0 after 14 usecs
calling acenic_init+0x0/0x16 @ 1
initcall acenic_init+0x0/0x16 returned 0 after 14 usecs
calling natsemi_init_mod+0x0/0x16 @ 1
initcall natsemi_init_mod+0x0/0x16 returned 0 after 14 usecs
calling fealnx_init+0x0/0x16 @ 1
initcall fealnx_init+0x0/0x16 returned 0 after 14 usecs
calling tg3_init+0x0/0x16 @ 1
initcall tg3_init+0x0/0x16 returned 0 after 19 usecs
calling bnx2_init+0x0/0x16 @ 1
initcall bnx2_init+0x0/0x16 returned 0 after 15 usecs
calling cnic_init+0x0/0x36 @ 1
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
initcall cnic_init+0x0/0x36 returned 0 after 5785 usecs
calling skge_init_module+0x0/0x16 @ 1
initcall skge_init_module+0x0/0x16 returned 0 after 15 usecs
calling ksz884x_init_module+0x0/0x16 @ 1
initcall ksz884x_init_module+0x0/0x16 returned 0 after 14 usecs
calling rhine_init+0x0/0x65 @ 1
initcall rhine_init+0x0/0x65 returned 0 after 17 usecs
calling velocity_init_module+0x0/0x34 @ 1
initcall velocity_init_module+0x0/0x34 returned 0 after 14 usecs
calling sundance_init+0x0/0x16 @ 1
initcall sundance_init+0x0/0x16 returned 0 after 15 usecs
calling hamachi_init+0x0/0x16 @ 1
initcall hamachi_init+0x0/0x16 returned 0 after 14 usecs
calling net_olddevs_init+0x0/0x84 @ 1
initcall net_olddevs_init+0x0/0x84 returned 0 after 4 usecs
calling init_nic+0x0/0x16 @ 1
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
calling 1_async_port_probe+0x0/0x100 @ 78
calling 2_async_port_probe+0x0/0x100 @ 79
async_waiting @ 79
ata1.00: ATA-6: HDS722525VLAT80, V36OA60A, max UDMA/100
ata1.00: 488397168 sectors, multi 1: LBA48
ata1: nv_mode_filter: 0x3f39f&0x3f3ff->0x3f39f, BIOS=0x3f000 (0xc60000c0) ACPI=0x0
ata1.00: configured for UDMA/100
async_waiting @ 78
async_continuing @ 78 after 0 usec
scsi 0:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
initcall 1_async_port_probe+0x0/0x100 returned 0 after 290316 usecs
calling 3_sd_probe_async+0x0/0x1e0 @ 80
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
async_continuing @ 79 after 305836 usec
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
sd 0:0:0:0: [sda] Attached SCSI disk
initcall 3_sd_probe_async+0x0/0x1e0 returned 0 after 108537 usecs
ata2.01: ATAPI: DVDRW IDE 16X, VER A079, max UDMA/66
ata2: nv_mode_filter: 0x1f39f&0x73ff->0x739f, BIOS=0x7000 (0xc60000c0) ACPI=0x0
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d4:dc:41:12
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
initcall init_nic+0x0/0x16 returned 0 after 537717 usecs
calling ql3xxx_init_module+0x0/0x16 @ 1
initcall ql3xxx_init_module+0x0/0x16 returned 0 after 28 usecs
calling ppp_init+0x0/0xe5 @ 1
PPP generic driver version 2.4.2
initcall ppp_init+0x0/0xe5 returned 0 after 3016 usecs
calling ppp_sync_init+0x0/0x34 @ 1
initcall ppp_sync_init+0x0/0x34 returned 0 after 0 usecs
calling deflate_init+0x0/0x34 @ 1
PPP Deflate Compression module registered
initcall deflate_init+0x0/0x34 returned 0 after 3657 usecs
calling ppp_mppe_init+0x0/0x128 @ 1
PPP MPPE Compression module registered
initcall ppp_mppe_init+0x0/0x128 returned 0 after 3684 usecs
calling slip_init+0x0/0xaa @ 1
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
SLIP linefill/keepalive option.
initcall slip_init+0x0/0xaa returned 0 after 10968 usecs
calling dummy_init_module+0x0/0x9c @ 1
initcall dummy_init_module+0x0/0x9c returned 0 after 67 usecs
calling dfx_init+0x0/0x1b @ 1
initcall dfx_init+0x0/0x1b returned 0 after 23 usecs
calling rtl8139_init_module+0x0/0x16 @ 1
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:05:07.0: eth1: RealTek RTL8139 at 0x80d38000, 00:c0:df:03:68:5d, IRQ 11
initcall rtl8139_init_module+0x0/0x16 returned 0 after 11562 usecs
calling tun_init+0x0/0x8d @ 1
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
initcall tun_init+0x0/0x8d returned 0 after 8480 usecs
calling veth_init+0x0/0xf @ 1
initcall veth_init+0x0/0xf returned 0 after 0 usecs
calling rio_init+0x0/0x16 @ 1
initcall rio_init+0x0/0x16 returned 0 after 20 usecs
calling rtl8169_init_module+0x0/0x16 @ 1
initcall rtl8169_init_module+0x0/0x16 returned 0 after 17 usecs
calling s2io_starter+0x0/0x16 @ 1
initcall s2io_starter+0x0/0x16 returned 0 after 17 usecs
calling myri10ge_init_module+0x0/0x65 @ 1
myri10ge: Version 1.5.2-1.459
initcall myri10ge_init_module+0x0/0x65 returned 0 after 2659 usecs
calling mlx4_init+0x0/0xc6 @ 1
initcall mlx4_init+0x0/0xc6 returned 0 after 163 usecs
calling mlx4_en_init+0x0/0xf @ 1
initcall mlx4_en_init+0x0/0xf returned 0 after 0 usecs
calling enc28j60_init+0x0/0x1e @ 1
initcall enc28j60_init+0x0/0x1e returned 0 after 10 usecs
calling ethoc_init+0x0/0xf @ 1
initcall ethoc_init+0x0/0xf returned 0 after 13 usecs
calling abyss_init+0x0/0x3f @ 1
initcall abyss_init+0x0/0x3f returned 0 after 18 usecs
calling xl_pci_init+0x0/0x16 @ 1
initcall xl_pci_init+0x0/0x16 returned 0 after 16 usecs
calling arcnet_init+0x0/0x57 @ 1
arcnet loaded.
initcall arcnet_init+0x0/0x57 returned 0 after 1374 usecs
calling arcnet_rfc1201_init+0x0/0x6a @ 1
arcnet: RFC1201 "standard" (`a') encapsulation support loaded.
initcall arcnet_rfc1201_init+0x0/0x6a returned 0 after 5434 usecs
calling arcnet_rfc1051_init+0x0/0x42 @ 1
arcnet: RFC1051 "simple standard" (`s') encapsulation support loaded.
initcall arcnet_rfc1051_init+0x0/0x42 returned 0 after 6036 usecs
calling com90xx_init+0x0/0x29 @ 1
arcnet: COM90xx chipset support
S3: No ARCnet cards found.
initcall com90xx_init+0x0/0x29 returned -5 after 298299 usecs
initcall com90xx_init+0x0/0x29 returned with error code -5
calling com90io_init+0x0/0x488 @ 1
arcnet: COM90xx IO-mapped mode support (by David Woodhouse et el.)
E-mail me if you actually test this driver, please!
arc%d: No autoprobe for IO mapped cards; you must specify the base address!
initcall com90io_init+0x0/0x488 returned -19 after 16904 usecs
calling init_fmvj18x_cs+0x0/0xf @ 1
initcall init_fmvj18x_cs+0x0/0xf returned 0 after 15 usecs
calling init_smc91c92_cs+0x0/0xf @ 1
initcall init_smc91c92_cs+0x0/0xf returned 0 after 13 usecs
calling init_xirc2ps_cs+0x0/0xf @ 1
initcall init_xirc2ps_cs+0x0/0xf returned 0 after 11 usecs
calling init_com20020_cs+0x0/0xf @ 1
initcall init_com20020_cs+0x0/0xf returned 0 after 8 usecs
calling init_ibmtr_cs+0x0/0xf @ 1
initcall init_ibmtr_cs+0x0/0xf returned 0 after 10 usecs
calling pegasus_init+0x0/0x13b @ 1
pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
initcall pegasus_init+0x0/0x13b returned 0 after 10291 usecs
calling usb_rtl8150_init+0x0/0x26 @ 1
rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
usbcore: registered new interface driver rtl8150
initcall usb_rtl8150_init+0x0/0x26 returned 0 after 9705 usecs
calling asix_init+0x0/0x16 @ 1
usbcore: registered new interface driver asix
initcall asix_init+0x0/0x16 returned 0 after 4008 usecs
calling cdc_init+0x0/0x16 @ 1
usbcore: registered new interface driver cdc_ether
initcall cdc_init+0x0/0x16 returned 0 after 4427 usecs
calling smsc75xx_init+0x0/0x16 @ 1
usbcore: registered new interface driver smsc75xx
initcall smsc75xx_init+0x0/0x16 returned 0 after 4348 usecs
calling plusb_init+0x0/0x16 @ 1
usbcore: registered new interface driver plusb
initcall plusb_init+0x0/0x16 returned 0 after 4091 usecs
calling rndis_init+0x0/0x16 @ 1
usbcore: registered new interface driver rndis_host
initcall rndis_init+0x0/0x16 returned 0 after 4524 usecs
calling zaurus_init+0x0/0x16 @ 1
usbcore: registered new interface driver zaurus
initcall zaurus_init+0x0/0x16 returned 0 after 4177 usecs
calling mcs7830_init+0x0/0x16 @ 1
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
initcall mcs7830_init+0x0/0x16 returned 0 after 5956 usecs
calling usbnet_init+0x0/0x26 @ 1
initcall usbnet_init+0x0/0x26 returned 0 after 3 usecs
calling int51x1_init+0x0/0x16 @ 1
usbcore: registered new interface driver int51x1
initcall int51x1_init+0x0/0x16 returned 0 after 4261 usecs
calling sierra_net_init+0x0/0x16 @ 1
usbcore: registered new interface driver sierra_net
initcall sierra_net_init+0x0/0x16 returned 0 after 4516 usecs
calling airo_init_module+0x0/0xea @ 1
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
initcall airo_init_module+0x0/0xea returned 0 after 6587 usecs
calling prism54_module_init+0x0/0x36 @ 1
Loaded prism54 driver, version 1.2
initcall prism54_module_init+0x0/0x36 returned 0 after 3084 usecs
calling hostap_init+0x0/0x40 @ 1
initcall hostap_init+0x0/0x40 returned 0 after 4 usecs
calling init_prism2_pccard+0x0/0xf @ 1
initcall init_prism2_pccard+0x0/0xf returned 0 after 13 usecs
calling init_prism2_plx+0x0/0x16 @ 1
initcall init_prism2_plx+0x0/0x16 returned 0 after 18 usecs
calling init_ray_cs+0x0/0xb1 @ 1
initcall init_ray_cs+0x0/0xb1 returned 0 after 16 usecs
calling wl3501_init_module+0x0/0xf @ 1
initcall wl3501_init_module+0x0/0xf returned 0 after 8 usecs
calling zd1201_init+0x0/0x16 @ 1
usbcore: registered new interface driver zd1201
initcall zd1201_init+0x0/0x16 returned 0 after 4170 usecs
calling mkiss_init_driver+0x0/0x40 @ 1
mkiss: AX.25 Multikiss, Hans Albas PE1AYX
initcall mkiss_init_driver+0x0/0x40 returned 0 after 3659 usecs
calling sixpack_init_driver+0x0/0x40 @ 1
AX.25: 6pack driver, Revision: 0.3.0
initcall sixpack_init_driver+0x0/0x40 returned 0 after 3237 usecs
calling yam_init_driver+0x0/0x11e @ 1
YAM driver version 0.8 by F1OAT/F6FBB
initcall yam_init_driver+0x0/0x11e returned 0 after 3533 usecs
calling bpq_init_driver+0x0/0x5d @ 1
AX.25: bpqether driver version 004
initcall bpq_init_driver+0x0/0x5d returned 0 after 3072 usecs
calling init_baycomserfdx+0x0/0x10d @ 1
baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
baycom_ser_fdx: version 0.10 compiled 18:18:20 Sep 3 2010
initcall init_baycomserfdx+0x0/0x10d returned 0 after 10329 usecs
calling hdlcdrv_init_driver+0x0/0x23 @ 1
hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
hdlcdrv: version 0.8 compiled 18:18:20 Sep 3 2010
initcall hdlcdrv_init_driver+0x0/0x23 returned 0 after 8757 usecs
calling init_netconsole+0x0/0x206 @ 1
console [netcon0] enabled
netconsole: network logging started
initcall init_netconsole+0x0/0x206 returned 0 after 5473 usecs
calling caif_ser_init+0x0/0x4f @ 1
initcall caif_ser_init+0x0/0x4f returned 0 after 5 usecs
calling zatm_init_module+0x0/0x16 @ 1
initcall zatm_init_module+0x0/0x16 returned 0 after 21 usecs
calling uPD98402_module_init+0x0/0x7 @ 1
initcall uPD98402_module_init+0x0/0x7 returned 0 after 0 usecs
calling amb_module_init+0x0/0x131 @ 1
Madge ATM Ambassador driver version 1.2.4
initcall amb_module_init+0x0/0x131 returned 0 after 3676 usecs
calling hrz_module_init+0x0/0xd4 @ 1
Madge ATM Horizon [Ultra] driver version 1.2.1
hrz: debug bitmap is 0
initcall hrz_module_init+0x0/0xd4 returned 0 after 6150 usecs
calling ia_module_init+0x0/0x4c @ 1
initcall ia_module_init+0x0/0x4c returned 0 after 17 usecs
calling idt77252_init+0x0/0x36 @ 1
idt77252_init: at 4202c290
initcall idt77252_init+0x0/0x36 returned 0 after 2407 usecs
calling solos_pci_init+0x0/0x2e @ 1
Solos PCI Driver Version 0.07
initcall solos_pci_init+0x0/0x2e returned 0 after 2658 usecs
calling atmtcp_init+0x0/0x11 @ 1
initcall atmtcp_init+0x0/0x11 returned 0 after 0 usecs
calling i2o_iop_init+0x0/0x46 @ 1
I2O subsystem v1.325
i2o: max drivers = 8
ata2.01: configured for UDMA/33
initcall i2o_iop_init+0x0/0x46 returned 0 after 6896 usecs
calling i2o_scsi_init+0x0/0x3f @ 1
I2O SCSI Peripheral OSM v1.316
initcall i2o_scsi_init+0x0/0x3f returned 0 after 2739 usecs
calling fusion_init+0x0/0x116 @ 1
Fusion MPT base driver 3.04.15
Copyright (c) 1999-2008 LSI Corporation
initcall fusion_init+0x0/0x116 returned 0 after 6217 usecs
calling mptfc_init+0x0/0xd7 @ 1
Fusion MPT FC Host driver 3.04.15
initcall mptfc_init+0x0/0xd7 returned 0 after 3005 usecs
calling mptsas_init+0x0/0xf0 @ 1
Fusion MPT SAS Host driver 3.04.15
initcall mptsas_init+0x0/0xf0 returned 0 after 3085 usecs
calling mptctl_init+0x0/0x143 @ 1
Fusion MPT misc device (ioctl) driver 3.04.15
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
initcall mptctl_init+0x0/0x143 returned 0 after 11938 usecs
calling pcilynx_init+0x0/0x35 @ 1
initcall pcilynx_init+0x0/0x35 returned 0 after 23 usecs
calling ohci1394_init+0x0/0x16 @ 1
initcall ohci1394_init+0x0/0x16 returned 0 after 18 usecs
calling video1394_init_module+0x0/0xad @ 1
video1394: Installed video1394 module
initcall video1394_init_module+0x0/0xad returned 0 after 3332 usecs
calling sbp2_module_init+0x0/0x80 @ 1
initcall sbp2_module_init+0x0/0x80 returned 0 after 8 usecs
calling dv1394_init_module+0x0/0x8b @ 1
initcall dv1394_init_module+0x0/0x8b returned 0 after 8 usecs
calling uio_init+0x0/0x7 @ 1
initcall uio_init+0x0/0x7 returned 0 after 0 usecs
calling hilscher_init_module+0x0/0x16 @ 1
initcall hilscher_init_module+0x0/0x16 returned 0 after 18 usecs
calling uio_pdrv_init+0x0/0xf @ 1
initcall uio_pdrv_init+0x0/0xf returned 0 after 12 usecs
calling uio_pdrv_genirq_init+0x0/0xf @ 1
initcall uio_pdrv_genirq_init+0x0/0xf returned 0 after 9 usecs
calling aectc_init+0x0/0x16 @ 1
initcall aectc_init+0x0/0x16 returned 0 after 22 usecs
calling netx_init_module+0x0/0x16 @ 1
initcall netx_init_module+0x0/0x16 returned 0 after 18 usecs
calling nonstatic_sysfs_init+0x0/0xf @ 1
initcall nonstatic_sysfs_init+0x0/0xf returned 0 after 0 usecs
calling pd6729_module_init+0x0/0x20 @ 1
initcall pd6729_module_init+0x0/0x20 returned 0 after 18 usecs
calling uwb_subsys_init+0x0/0x4a @ 1
initcall uwb_subsys_init+0x0/0x4a returned 0 after 17 usecs
calling hwarc_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver hwa-rc
initcall hwarc_driver_init+0x0/0x16 returned 0 after 4179 usecs
calling i1480_dfu_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver i1480-dfu-usb
initcall i1480_dfu_driver_init+0x0/0x16 returned 0 after 4777 usecs
calling i1480_est_init+0x0/0x96 @ 1
initcall i1480_est_init+0x0/0x96 returned 0 after 0 usecs
calling mon_init+0x0/0xe0 @ 1
initcall mon_init+0x0/0xe0 returned 0 after 65 usecs
calling ehci_hcd_init+0x0/0x6c @ 1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:02.1: can't find IRQ for PCI INT B; please try using pci=biosirq
ehci_hcd 0000:00:02.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.1 setup!
ehci_hcd 0000:00:02.1: init 0000:00:02.1 fail, -19
initcall ehci_hcd_init+0x0/0x6c returned 0 after 23610 usecs
calling isp1362_init+0x0/0x3f @ 1
driver isp1362-hcd, 2005-04-04
initcall isp1362_init+0x0/0x3f returned 0 after 2739 usecs
calling ohci_hcd_mod_init+0x0/0x70 @ 1
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
ohci_hcd 0000:00:02.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:02.0 setup!
ohci_hcd 0000:00:02.0: init 0000:00:02.0 fail, -19
initcall ohci_hcd_mod_init+0x0/0x70 returned 0 after 23263 usecs
calling uhci_hcd_init+0x0/0xb3 @ 1
uhci_hcd: USB Universal Host Controller Interface driver
initcall uhci_hcd_init+0x0/0xb3 returned 0 after 4958 usecs
calling xhci_hcd_init+0x0/0x29 @ 1
initcall xhci_hcd_init+0x0/0x29 returned 0 after 18 usecs
calling u132_hcd_init+0x0/0xb0 @ 1
driver u132_hcd built at 18:18:37 on Sep 3 2010
initcall u132_hcd_init+0x0/0xb0 returned 0 after 4334 usecs
calling isp1760_init+0x0/0x44 @ 1
initcall isp1760_init+0x0/0x44 returned 0 after 31 usecs
calling c67x00_init+0x0/0xf @ 1
initcall c67x00_init+0x0/0xf returned 0 after 12 usecs
calling wusbcore_init+0x0/0x78 @ 1
initcall wusbcore_init+0x0/0x78 returned 0 after 55 usecs
calling cbaf_driver_init+0x0/0x16 @ 1
usbcore: registered new interface driver wusb-cbaf
initcall cbaf_driver_init+0x0/0x16 returned 0 after 4440 usecs
calling acm_init+0x0/0xce @ 1
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
initcall acm_init+0x0/0xce returned 0 after 11327 usecs
calling usblp_init+0x0/0x16 @ 1
usbcore: registered new interface driver usblp
initcall usblp_init+0x0/0x16 returned 0 after 4100 usecs
calling usbtmc_init+0x0/0x31 @ 1
usbcore: registered new interface driver usbtmc
initcall usbtmc_init+0x0/0x31 returned 0 after 4174 usecs
calling usb_mdc800_init+0x0/0x280 @ 1
usbcore: registered new interface driver mdc800
mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
initcall usb_mdc800_init+0x0/0x280 returned 0 after 10374 usecs
calling adu_init+0x0/0xa0 @ 1
usbcore: registered new interface driver adutux
adutux adutux (see www.ontrak.net) v0.0.13
adutux is an experimental driver. Use at your own risk
initcall adu_init+0x0/0xa0 returned 0 after 12679 usecs
calling cypress_init+0x0/0x36 @ 1
usbcore: registered new interface driver cypress_cy7c63
initcall cypress_init+0x0/0x36 returned 0 after 4849 usecs
calling emi26_init+0x0/0x16 @ 1
usbcore: registered new interface driver emi26 - firmware loader
initcall emi26_init+0x0/0x16 returned 0 after 5623 usecs
calling ftdi_elan_init+0x0/0x16e @ 1
driver ftdi-elan built at 18:18:35 on Sep 3 2010
async_waiting @ 79
async_continuing @ 79 after 0 usec
usbcore: registered new interface driver ftdi-elan
initcall ftdi_elan_init+0x0/0x16e returned 0 after 13717 usecs
calling usb_idmouse_init+0x0/0x42 @ 1
idmouse: 0.6:Siemens ID Mouse FingerTIP Sensor Driver
usbcore: registered new interface driver idmouse
initcall usb_idmouse_init+0x0/0x42 returned 0 after 8942 usecs
calling iowarrior_init+0x0/0x16 @ 1
usbcore: registered new interface driver iowarrior
initcall iowarrior_init+0x0/0x16 returned 0 after 4428 usecs
calling usb_lcd_init+0x0/0x36 @ 1
usbcore: registered new interface driver usblcd
initcall usb_lcd_init+0x0/0x36 returned 0 after 4180 usecs
calling usbtest_init+0x0/0x16 @ 1
usbcore: registered new interface driver usbtest
initcall usbtest_init+0x0/0x16 returned 0 after 4268 usecs
calling usb_sevseg_init+0x0/0x36 @ 1
usbcore: registered new interface driver usbsevseg
initcall usb_sevseg_init+0x0/0x36 returned 0 after 4429 usecs
calling r8a66597_udc_init+0x0/0x14 @ 1
initcall r8a66597_udc_init+0x0/0x14 returned -19 after 18 usecs
calling init+0x0/0xf @ 1
initcall init+0x0/0xf returned -19 after 0 usecs
calling i8042_init+0x0/0xcb @ 1
scsi 1:0:1:0: CD-ROM DVDRW IDE 16X A079 PQ: 0 ANSI: 5
scsi 1:0:1:0: Attached scsi generic sg1 type 5
initcall 2_async_port_probe+0x0/0x100 returned 0 after 2212221 usecs
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall i8042_init+0x0/0xcb returned 0 after 27079 usecs
calling serport_init+0x0/0x2f @ 1
initcall serport_init+0x0/0x2f returned 0 after 0 usecs
calling pcips2_init+0x0/0x16 @ 1
initcall pcips2_init+0x0/0x16 returned 0 after 28 usecs
calling altera_ps2_init+0x0/0xf @ 1
initcall altera_ps2_init+0x0/0xf returned 0 after 11 usecs
calling emu_init+0x0/0x16 @ 1
initcall emu_init+0x0/0x16 returned 0 after 20 usecs
calling fm801_gp_init+0x0/0x16 @ 1
initcall fm801_gp_init+0x0/0x16 returned 0 after 21 usecs
calling l4_init+0x0/0x325 @ 1
initcall l4_init+0x0/0x325 returned -19 after 9 usecs
calling ns558_init+0x0/0x331 @ 1
initcall ns558_init+0x0/0x331 returned -19 after 8745 usecs
calling mousedev_init+0x0/0x55 @ 1
mice: PS/2 mouse device common for all mice
initcall mousedev_init+0x0/0x55 returned 0 after 3878 usecs
calling joydev_init+0x0/0xf @ 1
initcall joydev_init+0x0/0xf returned 0 after 0 usecs
calling atkbd_init+0x0/0x20 @ 1
initcall atkbd_init+0x0/0x20 returned 0 after 16 usecs
calling lkkbd_init+0x0/0x16 @ 1
initcall lkkbd_init+0x0/0x16 returned 0 after 8 usecs
calling lm8323_init+0x0/0x11 @ 1
i2c-core: driver [lm8323] registered
initcall lm8323_init+0x0/0x11 returned 0 after 3255 usecs
calling matrix_keypad_init+0x0/0xf @ 1
initcall matrix_keypad_init+0x0/0xf returned 0 after 11 usecs
calling nkbd_init+0x0/0x16 @ 1
initcall nkbd_init+0x0/0x16 returned 0 after 8 usecs
calling opencores_kbd_init+0x0/0xf @ 1
initcall opencores_kbd_init+0x0/0xf returned 0 after 9 usecs
calling skbd_init+0x0/0x16 @ 1
initcall skbd_init+0x0/0x16 returned 0 after 8 usecs
calling sunkbd_init+0x0/0x16 @ 1
initcall sunkbd_init+0x0/0x16 returned 0 after 9 usecs
calling a3d_init+0x0/0x16 @ 1
initcall a3d_init+0x0/0x16 returned 0 after 10 usecs
calling adi_init+0x0/0x16 @ 1
initcall adi_init+0x0/0x16 returned 0 after 8 usecs
calling analog_init+0x0/0xdb @ 1
initcall analog_init+0x0/0xdb returned 0 after 8 usecs
calling grip_init+0x0/0x16 @ 1
initcall grip_init+0x0/0x16 returned 0 after 8 usecs
calling joydump_init+0x0/0x16 @ 1
initcall joydump_init+0x0/0x16 returned 0 after 8 usecs
calling sw_init+0x0/0x16 @ 1
initcall sw_init+0x0/0x16 returned 0 after 10 usecs
calling spaceball_init+0x0/0x16 @ 1
initcall spaceball_init+0x0/0x16 returned 0 after 11 usecs
calling spaceorb_init+0x0/0x16 @ 1
initcall spaceorb_init+0x0/0x16 returned 0 after 9 usecs
calling stinger_init+0x0/0x16 @ 1
initcall stinger_init+0x0/0x16 returned 0 after 9 usecs
calling tmdc_init+0x0/0x16 @ 1
initcall tmdc_init+0x0/0x16 returned 0 after 8 usecs
calling twidjoy_init+0x0/0x16 @ 1
initcall twidjoy_init+0x0/0x16 returned 0 after 8 usecs
calling usb_xpad_init+0x0/0x31 @ 1
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
initcall usb_xpad_init+0x0/0x31 returned 0 after 6067 usecs
calling usb_acecad_init+0x0/0x31 @ 1
usbcore: registered new interface driver usb_acecad
acecad: v3.2:USB Acecad Flair tablet driver
initcall usb_acecad_init+0x0/0x31 returned 0 after 8344 usecs
calling aiptek_init+0x0/0x3d @ 1
usbcore: registered new interface driver aiptek
aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
initcall aiptek_init+0x0/0x3d returned 0 after 16582 usecs
calling gtco_init+0x0/0x4c @ 1
usbcore: registered new interface driver gtco
GTCO usb driver version: 2.00.0006initcall gtco_init+0x0/0x4c returned 0 after 6910 usecs
calling kbtab_init+0x0/0x31 @ 1
usbcore: registered new interface driver kbtab
kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
initcall kbtab_init+0x0/0x31 returned 0 after 8429 usecs
calling i2c_smbus_init+0x0/0x11 @ 1
i2c-core: driver [smbus_alert] registered
initcall i2c_smbus_init+0x0/0x11 returned 0 after 3664 usecs
calling i2c_ali1535_init+0x0/0x16 @ 1
initcall i2c_ali1535_init+0x0/0x16 returned 0 after 22 usecs
calling ali1563_init+0x0/0x16 @ 1
initcall ali1563_init+0x0/0x16 returned 0 after 19 usecs
calling amd756_init+0x0/0x16 @ 1
initcall amd756_init+0x0/0x16 returned 0 after 20 usecs
calling i2c_sch_init+0x0/0xf @ 1
initcall i2c_sch_init+0x0/0xf returned 0 after 10 usecs
calling i2c_sis5595_init+0x0/0x16 @ 1
initcall i2c_sis5595_init+0x0/0x16 returned 0 after 26 usecs
calling i2c_sis630_init+0x0/0x16 @ 1
initcall i2c_sis630_init+0x0/0x16 returned 0 after 20 usecs
calling i2c_sis96x_init+0x0/0x16 @ 1
initcall i2c_sis96x_init+0x0/0x16 returned 0 after 19 usecs
calling i2c_pca_pf_init+0x0/0xf @ 1
initcall i2c_pca_pf_init+0x0/0xf returned 0 after 10 usecs
calling i2c_adap_simtec_init+0x0/0xf @ 1
initcall i2c_adap_simtec_init+0x0/0xf returned 0 after 9 usecs
calling xiic_i2c_init+0x0/0xf @ 1
initcall xiic_i2c_init+0x0/0xf returned 0 after 9 usecs
calling taos_init+0x0/0x16 @ 1
initcall taos_init+0x0/0x16 returned 0 after 8 usecs
calling usb_i2c_tiny_usb_init+0x0/0x16 @ 1
usbcore: registered new interface driver i2c-tiny-usb
initcall usb_i2c_tiny_usb_init+0x0/0x16 returned 0 after 4681 usecs
calling scx200_acb_init+0x0/0x201 @ 1
scx200_acb: NatSemi SCx200 ACCESS.bus Driver
initcall scx200_acb_init+0x0/0x201 returned -19 after 3926 usecs
calling pps_tty_init+0x0/0x97 @ 1
PPS line discipline registered
initcall pps_tty_init+0x0/0x97 returned 0 after 2730 usecs
calling w1_init+0x0/0x98 @ 1
Driver for 1-wire Dallas network protocol.
initcall w1_init+0x0/0x98 returned 0 after 3776 usecs
calling ds_init+0x0/0x40 @ 1
usbcore: registered new interface driver DS9490R
initcall ds_init+0x0/0x40 returned 0 after 4261 usecs
calling w1_gpio_init+0x0/0x14 @ 1
initcall w1_gpio_init+0x0/0x14 returned -19 after 15 usecs
calling w1_therm_init+0x0/0x29 @ 1
initcall w1_therm_init+0x0/0x29 returned 0 after 0 usecs
calling w1_smem_init+0x0/0x33 @ 1
initcall w1_smem_init+0x0/0x33 returned 0 after 0 usecs
calling w1_f2d_init+0x0/0xf @ 1
initcall w1_f2d_init+0x0/0xf returned 0 after 0 usecs
calling w1_ds2760_init+0x0/0x29 @ 1
1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
initcall w1_ds2760_init+0x0/0x29 returned 0 after 7299 usecs
calling w1_bq27000_init+0x0/0x1d @ 1
initcall w1_bq27000_init+0x0/0x1d returned -17 after 0 usecs
initcall w1_bq27000_init+0x0/0x1d returned with error code -17
calling pda_power_init+0x0/0xf @ 1
initcall pda_power_init+0x0/0xf returned 0 after 10 usecs
calling wm831x_backup_init+0x0/0xf @ 1
initcall wm831x_backup_init+0x0/0xf returned 0 after 10 usecs
calling wm8350_power_init+0x0/0xf @ 1
initcall wm8350_power_init+0x0/0xf returned 0 after 10 usecs
calling ds2760_battery_init+0x0/0xf @ 1
initcall ds2760_battery_init+0x0/0xf returned 0 after 10 usecs
calling bq27x00_battery_init+0x0/0x2c @ 1
i2c-core: driver [bq27x00-battery] registered
initcall bq27x00_battery_init+0x0/0x2c returned 0 after 4007 usecs
calling da903x_battery_init+0x0/0x20 @ 1
initcall da903x_battery_init+0x0/0x20 returned 0 after 12 usecs
calling pcf50633_mbc_init+0x0/0xf @ 1
initcall pcf50633_mbc_init+0x0/0xf returned 0 after 10 usecs
calling asb100_init+0x0/0x11 @ 1
i2c-core: driver [asb100] registered
initcall asb100_init+0x0/0x11 returned 0 after 3239 usecs
calling sensors_w83792d_init+0x0/0x11 @ 1
i2c-core: driver [w83792d] registered
initcall sensors_w83792d_init+0x0/0x11 returned 0 after 3329 usecs
calling sensors_w83793_init+0x0/0x11 @ 1
i2c-core: driver [w83793] registered
initcall sensors_w83793_init+0x0/0x11 returned 0 after 3247 usecs
calling sensors_w83781d_init+0x0/0x11 @ 1
i2c-core: driver [w83781d] registered
initcall sensors_w83781d_init+0x0/0x11 returned 0 after 3329 usecs
calling abituguru3_init+0x0/0x214 @ 1
initcall abituguru3_init+0x0/0x214 returned -19 after 0 usecs
calling ad7414_init+0x0/0x11 @ 1
i2c-core: driver [ad7414] registered
initcall ad7414_init+0x0/0x11 returned 0 after 3241 usecs
calling init_adcxx+0x0/0xf @ 1
initcall init_adcxx+0x0/0xf returned 0 after 9 usecs
calling sensors_adm1021_init+0x0/0x11 @ 1
i2c-core: driver [adm1021] registered
initcall sensors_adm1021_init+0x0/0x11 returned 0 after 3326 usecs
calling sensors_adm1025_init+0x0/0x11 @ 1
i2c-core: driver [adm1025] registered
initcall sensors_adm1025_init+0x0/0x11 returned 0 after 3338 usecs
calling sensors_adm1029_init+0x0/0x11 @ 1
i2c-core: driver [adm1029] registered
initcall sensors_adm1029_init+0x0/0x11 returned 0 after 3329 usecs
calling sensors_adm9240_init+0x0/0x11 @ 1
i2c-core: driver [adm9240] registered
initcall sensors_adm9240_init+0x0/0x11 returned 0 after 3333 usecs
calling ads7871_init+0x0/0xf @ 1
initcall ads7871_init+0x0/0xf returned 0 after 7 usecs
calling sensors_adt7411_init+0x0/0x11 @ 1
i2c-core: driver [adt7411] registered
initcall sensors_adt7411_init+0x0/0x11 returned 0 after 3326 usecs
calling adt7462_init+0x0/0x11 @ 1
i2c-core: driver [adt7462] registered
initcall adt7462_init+0x0/0x11 returned 0 after 3329 usecs
calling adt7470_init+0x0/0x11 @ 1
i2c-core: driver [adt7470] registered
initcall adt7470_init+0x0/0x11 returned 0 after 3331 usecs
calling applesmc_init+0x0/0x4ac @ 1
applesmc: supported laptop not found!
applesmc: driver init failed (ret=-19)!
initcall applesmc_init+0x0/0x4ac returned -19 after 6817 usecs
calling atxp1_init+0x0/0x11 @ 1
i2c-core: driver [atxp1] registered
initcall atxp1_init+0x0/0x11 returned 0 after 3155 usecs
calling ds1621_init+0x0/0x11 @ 1
i2c-core: driver [ds1621] registered
initcall ds1621_init+0x0/0x11 returned 0 after 3246 usecs
calling sensor_emc1403_init+0x0/0x11 @ 1
i2c-core: driver [emc1403] registered
initcall sensor_emc1403_init+0x0/0x11 returned 0 after 3331 usecs
calling f71805f_init+0x0/0x126 @ 1
initcall f71805f_init+0x0/0x126 returned -19 after 23 usecs
calling i5k_amb_init+0x0/0x52 @ 1
initcall i5k_amb_init+0x0/0x52 returned 0 after 46 usecs
calling k10temp_init+0x0/0x16 @ 1
initcall k10temp_init+0x0/0x16 returned 0 after 22 usecs
calling lis302dl_init+0x0/0xf @ 1
initcall lis302dl_init+0x0/0xf returned 0 after 8 usecs
calling lis3lv02d_init+0x0/0x11 @ 1
i2c-core: driver [lis3lv02d_i2c] registered
initcall lis3lv02d_init+0x0/0x11 returned 0 after 3834 usecs
calling sensors_lm63_init+0x0/0x11 @ 1
i2c-core: driver [lm63] registered
initcall sensors_lm63_init+0x0/0x11 returned 0 after 3077 usecs
calling init_lm70+0x0/0xf @ 1
initcall init_lm70+0x0/0xf returned 0 after 7 usecs
calling sensors_lm75_init+0x0/0x11 @ 1
i2c-core: driver [lm75] registered
initcall sensors_lm75_init+0x0/0x11 returned 0 after 3078 usecs
calling sensors_lm77_init+0x0/0x11 @ 1
i2c-core: driver [lm77] registered
initcall sensors_lm77_init+0x0/0x11 returned 0 after 3074 usecs
calling sm_lm78_init+0x0/0x355 @ 1
i2c-core: driver [lm78] registered
initcall sm_lm78_init+0x0/0x355 returned 0 after 3093 usecs
calling sensors_lm80_init+0x0/0x11 @ 1
i2c-core: driver [lm80] registered
initcall sensors_lm80_init+0x0/0x11 returned 0 after 3072 usecs
calling ltc4215_init+0x0/0x11 @ 1
i2c-core: driver [ltc4215] registered
initcall ltc4215_init+0x0/0x11 returned 0 after 3332 usecs
calling ltc4245_init+0x0/0x11 @ 1
i2c-core: driver [ltc4245] registered
initcall ltc4245_init+0x0/0x11 returned 0 after 3330 usecs
calling max1111_init+0x0/0xf @ 1
initcall max1111_init+0x0/0xf returned 0 after 8 usecs
calling sensors_max6650_init+0x0/0x11 @ 1
i2c-core: driver [max6650] registered
initcall sensors_max6650_init+0x0/0x11 returned 0 after 3331 usecs
calling sm_sis5595_init+0x0/0x16 @ 1
initcall sm_sis5595_init+0x0/0x16 returned 0 after 20 usecs
calling smsc47b397_init+0x0/0x164 @ 1
initcall smsc47b397_init+0x0/0x164 returned -19 after 6 usecs
calling sm_smsc47m1_init+0x0/0x253 @ 1
initcall sm_smsc47m1_init+0x0/0x253 returned -19 after 6 usecs
calling amc6821_init+0x0/0x11 @ 1
i2c-core: driver [amc6821] registered
initcall amc6821_init+0x0/0x11 returned 0 after 3331 usecs
calling tmp401_init+0x0/0x11 @ 1
i2c-core: driver [tmp401] registered
initcall tmp401_init+0x0/0x11 returned 0 after 3243 usecs
calling tmp421_init+0x0/0x11 @ 1
i2c-core: driver [tmp421] registered
initcall tmp421_init+0x0/0x11 returned 0 after 3245 usecs
calling via_cputemp_init+0x0/0x1a6 @ 1
via_cputemp: Not a VIA CPU
initcall via_cputemp_init+0x0/0x1a6 returned -19 after 2386 usecs
calling sm_vt8231_init+0x0/0x16 @ 1
initcall sm_vt8231_init+0x0/0x16 returned 0 after 20 usecs
calling wm831x_hwmon_init+0x0/0xf @ 1
initcall wm831x_hwmon_init+0x0/0xf returned 0 after 11 usecs
calling wm8350_hwmon_init+0x0/0xf @ 1
initcall wm8350_hwmon_init+0x0/0xf returned 0 after 13 usecs
calling raid0_init+0x0/0xf @ 1
md: raid0 personality registered for level 0
initcall raid0_init+0x0/0xf returned 0 after 3911 usecs
calling raid_init+0x0/0xf @ 1
md: raid1 personality registered for level 1
initcall raid_init+0x0/0xf returned 0 after 3910 usecs
calling raid_init+0x0/0xf @ 1
md: raid10 personality registered for level 10
initcall raid_init+0x0/0xf returned 0 after 4079 usecs
calling hci_uart_init+0x0/0xcc @ 1
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
initcall hci_uart_init+0x0/0xcc returned 0 after 10044 usecs
calling bpa10x_init+0x0/0x2e @ 1
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
initcall bpa10x_init+0x0/0x2e returned 0 after 8683 usecs
calling init_btuart_cs+0x0/0xf @ 1
initcall init_btuart_cs+0x0/0xf returned 0 after 10 usecs
calling btsdio_init+0x0/0x27 @ 1
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
initcall btsdio_init+0x0/0x27 returned 0 after 4259 usecs
calling isdn_init+0x0/0x2a8 @ 1
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/none/none/1.1.2.2
initcall isdn_init+0x0/0x2a8 returned 0 after 5533 usecs
calling divert_init+0x0/0x63 @ 1
dss1_divert module successfully installed
initcall divert_init+0x0/0x63 returned 0 after 3669 usecs
calling init_ladder+0x0/0xf @ 1
cpuidle: using governor ladder
initcall init_ladder+0x0/0xf returned 0 after 2729 usecs
calling init_menu+0x0/0xf @ 1
cpuidle: using governor menu
initcall init_menu+0x0/0xf returned 0 after 2564 usecs
calling mmc_test_init+0x0/0xf @ 1
initcall mmc_test_init+0x0/0xf returned 0 after 9 usecs
calling wbsd_drv_init+0x0/0x7c @ 1
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
initcall wbsd_drv_init+0x0/0x7c returned 0 after 7493 usecs
calling sdricoh_drv_init+0x0/0xf @ 1
initcall sdricoh_drv_init+0x0/0xf returned 0 after 10 usecs
calling via_sd_drv_init+0x0/0x26 @ 1
via_sdmmc: VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.
initcall via_sd_drv_init+0x0/0x26 returned 0 after 6307 usecs
calling pca9532_init+0x0/0x11 @ 1
i2c-core: driver [pca9532] registered
initcall pca9532_init+0x0/0x11 returned 0 after 3340 usecs
calling lp3944_module_init+0x0/0x11 @ 1
i2c-core: driver [lp3944] registered
initcall lp3944_module_init+0x0/0x11 returned 0 after 3245 usecs
calling clevo_mail_led_init+0x0/0x87 @ 1
initcall clevo_mail_led_init+0x0/0x87 returned -19 after 2 usecs
calling pca955x_leds_init+0x0/0x11 @ 1
i2c-core: driver [leds-pca955x] registered
initcall pca955x_leds_init+0x0/0x11 returned 0 after 3751 usecs
calling da903x_led_init+0x0/0xf @ 1
initcall da903x_led_init+0x0/0xf returned 0 after 11 usecs
calling wm831x_status_init+0x0/0x14 @ 1
initcall wm831x_status_init+0x0/0x14 returned 0 after 11 usecs
calling wm8350_led_init+0x0/0x14 @ 1
initcall wm8350_led_init+0x0/0x14 returned 0 after 11 usecs
calling regulator_led_init+0x0/0xf @ 1
initcall regulator_led_init+0x0/0xf returned 0 after 10 usecs
calling lt3593_led_init+0x0/0xf @ 1
initcall lt3593_led_init+0x0/0xf returned 0 after 10 usecs
calling mc13783_led_init+0x0/0xf @ 1
initcall mc13783_led_init+0x0/0xf returned 0 after 10 usecs
calling heartbeat_trig_init+0x0/0xf @ 1
initcall heartbeat_trig_init+0x0/0xf returned 0 after 0 usecs
calling bl_trig_init+0x0/0xf @ 1
initcall bl_trig_init+0x0/0xf returned 0 after 0 usecs
calling ib_core_init+0x0/0x3f @ 1
initcall ib_core_init+0x0/0x3f returned 0 after 11 usecs
calling ib_mad_init_module+0x0/0xcb @ 1
initcall ib_mad_init_module+0x0/0xcb returned 0 after 5 usecs
calling ib_sa_init+0x0/0x5c @ 1
initcall ib_sa_init+0x0/0x5c returned 0 after 91 usecs
calling ib_cm_init+0x0/0xe9 @ 1
initcall ib_cm_init+0x0/0xe9 returned 0 after 29 usecs
calling iw_cm_init+0x0/0x3e @ 1
initcall iw_cm_init+0x0/0x3e returned 0 after 14 usecs
calling addr_init+0x0/0x4d @ 1
initcall addr_init+0x0/0x4d returned 0 after 14 usecs
calling cma_init+0x0/0x9d @ 1
initcall cma_init+0x0/0x9d returned 0 after 16 usecs
calling ib_uverbs_init+0x0/0xb9 @ 1
initcall ib_uverbs_init+0x0/0xb9 returned 0 after 10 usecs
calling ib_ucm_init+0x0/0x93 @ 1
initcall ib_ucm_init+0x0/0x93 returned 0 after 0 usecs
calling ucma_init+0x0/0x49 @ 1
initcall ucma_init+0x0/0x49 returned 0 after 139 usecs
calling mthca_init+0x0/0x161 @ 1
initcall mthca_init+0x0/0x161 returned 0 after 49 usecs
calling mlx4_ib_init+0x0/0xf @ 1
initcall mlx4_ib_init+0x0/0xf returned 0 after 0 usecs
calling nes_init_module+0x0/0x105 @ 1
initcall nes_init_module+0x0/0x105 returned 0 after 52 usecs
calling ipoib_init_module+0x0/0xf1 @ 1
input: AT Translated Set 2 keyboard as /class/input/input0
initcall ipoib_init_module+0x0/0xf1 returned 0 after 5265 usecs
calling srp_init_module+0x0/0xd3 @ 1
initcall srp_init_module+0x0/0xd3 returned 0 after 13 usecs
calling dcdrbu_init+0x0/0x106 @ 1
initcall dcdrbu_init+0x0/0x106 returned 0 after 30 usecs
calling ibft_init+0x0/0x53a @ 1
No iBFT detected.
initcall ibft_init+0x0/0x53a returned 0 after 1625 usecs
calling ioat_init_module+0x0/0x7c @ 1
ioatdma: Intel(R) QuickData Technology Driver 4.00
initcall ioat_init_module+0x0/0x7c returned 0 after 4450 usecs
calling fake_init+0x0/0x2e @ 1
ieee802154hardmac ieee802154hardmac: Added ieee802154 HardMAC hardware
initcall fake_init+0x0/0x2e returned 0 after 6269 usecs
calling oss_init+0x0/0x158 @ 1
initcall oss_init+0x0/0x158 returned 0 after 204 usecs
calling do_init_aedsp16+0x0/0xb3d @ 1
Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98
aedsp16: I/O, IRQ and DMA are mandatory
initcall do_init_aedsp16+0x0/0xb3d returned -22 after 9689 usecs
initcall do_init_aedsp16+0x0/0xb3d returned with error code -22
calling init_pss+0x0/0x6b0 @ 1
pss: mss_io, mss_dma, mss_irq and pss_io must be set.
initcall init_pss+0x0/0x6b0 returned -22 after 4670 usecs
initcall init_pss+0x0/0x6b0 returned with error code -22
calling init_ad1848+0x0/0x14f @ 1
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
initcall init_ad1848+0x0/0x14f returned 0 after 6112 usecs
calling init_mpu401+0x0/0x8c @ 1
initcall init_mpu401+0x0/0x8c returned 0 after 0 usecs
calling init_pas2+0x0/0x47c @ 1
Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
I/O, IRQ, DMA and type are mandatory
initcall init_pas2+0x0/0x47c returned -22 after 9274 usecs
initcall init_pas2+0x0/0x47c returned with error code -22
calling sb_init+0x0/0x2cc @ 1
sb: Init: Starting Probe...
sb: Error: At least io, irq, and dma must be set for legacy cards.
sb: Init: Done
initcall sb_init+0x0/0x2cc returned -19 after 9621 usecs
calling init_uart401+0x0/0x4e @ 1
initcall init_uart401+0x0/0x4e returned 0 after 0 usecs
calling init_uart6850+0x0/0x176 @ 1
uart6850: irq and io must be set.
initcall init_uart6850+0x0/0x176 returned -22 after 2982 usecs
initcall init_uart6850+0x0/0x176 returned with error code -22
calling init_vmidi+0x0/0x2c4 @ 1
MIDI Loopback device driver
initcall init_vmidi+0x0/0x2c4 returned 0 after 2573 usecs
calling flow_cache_init_global+0x0/0x113 @ 1
initcall flow_cache_init_global+0x0/0x113 returned 0 after 10 usecs
calling pg_init+0x0/0x28e @ 1
pktgen 2.73: Packet Generator for packet performance testing.
initcall pg_init+0x0/0x28e returned 0 after 5867 usecs
calling llc_init+0x0/0x1b @ 1
initcall llc_init+0x0/0x1b returned 0 after 0 usecs
calling llc2_init+0x0/0xbb @ 1
NET: Registered protocol family 26
initcall llc2_init+0x0/0xbb returned 0 after 3084 usecs
calling snap_init+0x0/0x36 @ 1
initcall snap_init+0x0/0x36 returned 0 after 1 usecs
calling rif_init+0x0/0x71 @ 1
initcall rif_init+0x0/0x71 returned 0 after 3 usecs
calling blackhole_module_init+0x0/0xf @ 1
initcall blackhole_module_init+0x0/0xf returned 0 after 0 usecs
calling police_init_module+0x0/0xf @ 1
initcall police_init_module+0x0/0xf returned 0 after 0 usecs
calling mirred_init_module+0x0/0x1f @ 1
Mirror/redirect action on
initcall mirred_init_module+0x0/0x1f returned 0 after 2300 usecs
calling ipt_init_module+0x0/0xf @ 1
initcall ipt_init_module+0x0/0xf returned 0 after 0 usecs
calling nat_init_module+0x0/0xf @ 1
initcall nat_init_module+0x0/0xf returned 0 after 0 usecs
calling simp_init_module+0x0/0x2a @ 1
Simple TC action Loaded
initcall simp_init_module+0x0/0x2a returned 0 after 2133 usecs
calling skbedit_init_module+0x0/0xf @ 1
initcall skbedit_init_module+0x0/0xf returned 0 after 0 usecs
calling cbq_module_init+0x0/0xf @ 1
initcall cbq_module_init+0x0/0xf returned 0 after 0 usecs
calling gred_module_init+0x0/0xf @ 1
initcall gred_module_init+0x0/0xf returned 0 after 0 usecs
calling tbf_module_init+0x0/0xf @ 1
initcall tbf_module_init+0x0/0xf returned 0 after 0 usecs
calling teql_init+0x0/0xd5 @ 1
initcall teql_init+0x0/0xd5 returned 0 after 70 usecs
calling prio_module_init+0x0/0xf @ 1
initcall prio_module_init+0x0/0xf returned 0 after 0 usecs
calling drr_init+0x0/0xf @ 1
initcall drr_init+0x0/0xf returned 0 after 0 usecs
calling init_route4+0x0/0xf @ 1
initcall init_route4+0x0/0xf returned 0 after 0 usecs
calling init_fw+0x0/0xf @ 1
initcall init_fw+0x0/0xf returned 0 after 0 usecs
calling init_tcindex+0x0/0xf @ 1
initcall init_tcindex+0x0/0xf returned 0 after 0 usecs
calling init_basic+0x0/0xf @ 1
initcall init_basic+0x0/0xf returned 0 after 0 usecs
calling nfnetlink_init+0x0/0x27 @ 1
Netfilter messages via NETLINK v0.30.
initcall nfnetlink_init+0x0/0x27 returned 0 after 3324 usecs
calling nfnetlink_log_init+0x0/0xc1 @ 1
initcall nfnetlink_log_init+0x0/0xc1 returned 0 after 7 usecs
calling xt_init+0x0/0xb1 @ 1
initcall xt_init+0x0/0xb1 returned 0 after 0 usecs
calling tcpudp_mt_init+0x0/0x14 @ 1
initcall tcpudp_mt_init+0x0/0x14 returned 0 after 0 usecs
calling mark_mt_init+0x0/0x37 @ 1
initcall mark_mt_init+0x0/0x37 returned 0 after 0 usecs
calling classify_tg_init+0x0/0xf @ 1
initcall classify_tg_init+0x0/0xf returned 0 after 0 usecs
calling hl_tg_init+0x0/0x14 @ 1
initcall hl_tg_init+0x0/0x14 returned 0 after 0 usecs
calling nflog_tg_init+0x0/0xf @ 1
initcall nflog_tg_init+0x0/0xf returned 0 after 0 usecs
calling xt_rateest_tg_init+0x0/0x24 @ 1
initcall xt_rateest_tg_init+0x0/0x24 returned 0 after 0 usecs
calling dccp_mt_init+0x0/0xb5 @ 1
initcall dccp_mt_init+0x0/0xb5 returned 0 after 0 usecs
calling hl_mt_init+0x0/0x14 @ 1
initcall hl_mt_init+0x0/0x14 returned 0 after 0 usecs
calling limit_mt_init+0x0/0xf @ 1
initcall limit_mt_init+0x0/0xf returned 0 after 0 usecs
calling mac_mt_init+0x0/0xf @ 1
initcall mac_mt_init+0x0/0xf returned 0 after 0 usecs
calling multiport_mt_init+0x0/0x14 @ 1
initcall multiport_mt_init+0x0/0x14 returned 0 after 0 usecs
calling xt_osf_init+0x0/0x83 @ 1
initcall xt_osf_init+0x0/0x83 returned 0 after 0 usecs
calling owner_mt_init+0x0/0xf @ 1
initcall owner_mt_init+0x0/0xf returned 0 after 0 usecs
calling quota_mt_init+0x0/0xf @ 1
initcall quota_mt_init+0x0/0xf returned 0 after 0 usecs
calling xt_rateest_mt_init+0x0/0xf @ 1
initcall xt_rateest_mt_init+0x0/0xf returned 0 after 0 usecs
calling realm_mt_init+0x0/0xf @ 1
initcall realm_mt_init+0x0/0xf returned 0 after 0 usecs
calling sctp_mt_init+0x0/0x14 @ 1
initcall sctp_mt_init+0x0/0x14 returned 0 after 0 usecs
calling statistic_mt_init+0x0/0xf @ 1
initcall statistic_mt_init+0x0/0xf returned 0 after 0 usecs
calling string_mt_init+0x0/0xf @ 1
initcall string_mt_init+0x0/0xf returned 0 after 0 usecs
calling tcpmss_mt_init+0x0/0x14 @ 1
initcall tcpmss_mt_init+0x0/0x14 returned 0 after 0 usecs
calling time_mt_init+0x0/0x5e @ 1
xt_time: kernel timezone is -0000
initcall time_mt_init+0x0/0x5e returned 0 after 2983 usecs
calling u32_mt_init+0x0/0xf @ 1
initcall u32_mt_init+0x0/0xf returned 0 after 0 usecs
calling sysctl_ipv4_init+0x0/0x71 @ 1
initcall sysctl_ipv4_init+0x0/0x71 returned 0 after 9 usecs
calling ipip_init+0x0/0x55 @ 1
IPv4 over IPv4 tunneling driver
initcall ipip_init+0x0/0x55 returned 0 after 2875 usecs
calling ipgre_init+0x0/0x90 @ 1
GRE over IPv4 tunneling driver
initcall ipgre_init+0x0/0x90 returned 0 after 2793 usecs
calling init_syncookies+0x0/0x16 @ 1
initcall init_syncookies+0x0/0x16 returned 0 after 32 usecs
calling ah4_init+0x0/0x66 @ 1
initcall ah4_init+0x0/0x66 returned 0 after 0 usecs
calling tunnel4_init+0x0/0x31 @ 1
initcall tunnel4_init+0x0/0x31 returned 0 after 0 usecs
calling xfrm4_transport_init+0x0/0x14 @ 1
initcall xfrm4_transport_init+0x0/0x14 returned 0 after 0 usecs
calling xfrm4_mode_tunnel_init+0x0/0x14 @ 1
initcall xfrm4_mode_tunnel_init+0x0/0x14 returned 0 after 0 usecs
calling ipv4_netfilter_init+0x0/0x20 @ 1
initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0 usecs
calling ip_tables_init+0x0/0x90 @ 1
ip_tables: (C) 2000-2006 Netfilter Core Team
initcall ip_tables_init+0x0/0x90 returned 0 after 3918 usecs
calling iptable_filter_init+0x0/0x61 @ 1
initcall iptable_filter_init+0x0/0x61 returned 0 after 9 usecs
calling iptable_security_init+0x0/0x40 @ 1
initcall iptable_security_init+0x0/0x40 returned 0 after 4 usecs
calling addrtype_mt_init+0x0/0x14 @ 1
initcall addrtype_mt_init+0x0/0x14 returned 0 after 0 usecs
calling ah_mt_init+0x0/0xf @ 1
initcall ah_mt_init+0x0/0xf returned 0 after 0 usecs
calling ulog_tg_init+0x0/0xd0 @ 1
initcall ulog_tg_init+0x0/0xd0 returned 0 after 4 usecs
calling arp_tables_init+0x0/0x6c @ 1
arp_tables: (C) 2002 David S. Miller
initcall arp_tables_init+0x0/0x6c returned 0 after 3247 usecs
calling ip_queue_init+0x0/0x124 @ 1
initcall ip_queue_init+0x0/0x124 returned 0 after 10 usecs
calling inet_diag_init+0x0/0xd8 @ 1
initcall inet_diag_init+0x0/0xd8 returned 0 after 1 usecs
calling tcp_diag_init+0x0/0xf @ 1
initcall tcp_diag_init+0x0/0xf returned 0 after 0 usecs
calling bictcp_register+0x0/0xf @ 1
TCP bic registered
initcall bictcp_register+0x0/0xf returned 0 after 1708 usecs
calling hstcp_register+0x0/0xf @ 1
TCP highspeed registered
initcall hstcp_register+0x0/0xf returned 0 after 2218 usecs
calling hybla_register+0x0/0xf @ 1
TCP hybla registered
initcall hybla_register+0x0/0xf returned 0 after 1878 usecs
calling htcp_register+0x0/0xf @ 1
TCP htcp registered
initcall htcp_register+0x0/0xf returned 0 after 1794 usecs
calling tcp_vegas_register+0x0/0x11 @ 1
TCP vegas registered
initcall tcp_vegas_register+0x0/0x11 returned 0 after 1881 usecs
calling tcp_lp_register+0x0/0xf @ 1
TCP lp registered
initcall tcp_lp_register+0x0/0xf returned 0 after 1628 usecs
calling tcp_yeah_register+0x0/0x11 @ 1
TCP yeah registered
initcall tcp_yeah_register+0x0/0x11 returned 0 after 1798 usecs
calling packet_init+0x0/0x39 @ 1
NET: Registered protocol family 17
initcall packet_init+0x0/0x39 returned 0 after 3070 usecs
calling ipsec_pfkey_init+0x0/0x6b @ 1
NET: Registered protocol family 15
initcall ipsec_pfkey_init+0x0/0x6b returned 0 after 3067 usecs
calling br_init+0x0/0x9b @ 1
initcall br_init+0x0/0x9b returned 0 after 11 usecs
calling dsa_init_module+0x0/0x11 @ 1
initcall dsa_init_module+0x0/0x11 returned 0 after 0 usecs
calling mv88e6131_init+0x0/0x11 @ 1
initcall mv88e6131_init+0x0/0x11 returned 0 after 0 usecs
calling dsa_init_module+0x0/0xf @ 1
initcall dsa_init_module+0x0/0xf returned 0 after 20 usecs
calling ipx_init+0x0/0xd9 @ 1
NET: Registered protocol family 4
initcall ipx_init+0x0/0xd9 returned 0 after 3222 usecs
calling atalk_init+0x0/0x7b @ 1
NET: Registered protocol family 5
initcall atalk_init+0x0/0x7b returned 0 after 2994 usecs
calling lapb_init+0x0/0x7 @ 1
initcall lapb_init+0x0/0x7 returned 0 after 0 usecs
calling ax25_init+0x0/0x94 @ 1
NET: Registered protocol family 3
initcall ax25_init+0x0/0x94 returned 0 after 2986 usecs
calling can_init+0x0/0xcc @ 1
can: controller area network core (rev 20090105 abi 8)
NET: Registered protocol family 29
initcall can_init+0x0/0xcc returned 0 after 7845 usecs
calling raw_module_init+0x0/0x36 @ 1
can: raw protocol (rev 20090105)
initcall raw_module_init+0x0/0x36 returned 0 after 2894 usecs
calling l2cap_init+0x0/0x127 @ 1
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
initcall l2cap_init+0x0/0x127 returned 0 after 5980 usecs
calling rfcomm_init+0x0/0xe8 @ 1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
initcall rfcomm_init+0x0/0xe8 returned 0 after 9638 usecs
calling bnep_init+0x0/0x8d @ 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
initcall bnep_init+0x0/0x8d returned 0 after 7742 usecs
calling init_rpcsec_gss+0x0/0x3f @ 1
initcall init_rpcsec_gss+0x0/0x3f returned 0 after 10 usecs
calling init_kerberos_module+0x0/0x2a @ 1
initcall init_kerberos_module+0x0/0x2a returned 0 after 2 usecs
calling xprt_rdma_init+0x0/0xbe @ 1
RPC: Registered rdma transport module.
initcall xprt_rdma_init+0x0/0xbe returned 0 after 3407 usecs
calling svc_rdma_init+0x0/0x170 @ 1
initcall svc_rdma_init+0x0/0x170 returned 0 after 8 usecs
calling af_rxrpc_init+0x0/0x189 @ 1
NET: Registered protocol family 33
initcall af_rxrpc_init+0x0/0x189 returned 0 after 3098 usecs
calling atm_clip_init+0x0/0xa7 @ 1
initcall atm_clip_init+0x0/0xa7 returned 0 after 12 usecs
calling br2684_init+0x0/0x41 @ 1
initcall br2684_init+0x0/0x41 returned 0 after 1 usecs
calling pppoatm_init+0x0/0x11 @ 1
initcall pppoatm_init+0x0/0x11 returned 0 after 0 usecs
calling l2tp_init+0x0/0x33 @ 1
L2TP core driver, V2.0
initcall l2tp_init+0x0/0x33 returned 0 after 2060 usecs
calling phonet_init+0x0/0x74 @ 1
NET: Registered protocol family 35
initcall phonet_init+0x0/0x74 returned 0 after 3083 usecs
calling pep_register+0x0/0x14 @ 1
initcall pep_register+0x0/0x14 returned 0 after 1 usecs
calling sctp_init+0x0/0x6b5 @ 1
SCTP: Hash tables configured (established 65536 bind 65536)
sctp_init_sock(sk: 7e948000)
initcall sctp_init+0x0/0x6b5 returned 0 after 8229 usecs
calling lib80211_init+0x0/0x1f @ 1
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
initcall lib80211_init+0x0/0x1f returned 0 after 8077 usecs
calling lib80211_crypto_wep_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'WEP'
initcall lib80211_crypto_wep_init+0x0/0xf returned 0 after 3742 usecs
calling lib80211_crypto_ccmp_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'CCMP'
initcall lib80211_crypto_ccmp_init+0x0/0xf returned 0 after 3835 usecs
calling lib80211_crypto_tkip_init+0x0/0xf @ 1
lib80211_crypt: registered algorithm 'TKIP'
initcall lib80211_crypto_tkip_init+0x0/0xf returned 0 after 3828 usecs
calling tipc_init+0x0/0xbf @ 1
TIPC: Activated (version 2.0.0 compiled Sep 3 2010 18:18:22)
NET: Registered protocol family 30
TIPC: Started in single node mode
initcall tipc_init+0x0/0xbf returned 0 after 11508 usecs
calling caif_device_init+0x0/0x72 @ 1
initcall caif_device_init+0x0/0x72 returned 0 after 9 usecs
calling caif_sktinit_module+0x0/0x145 @ 1
NET: Registered protocol family 37
initcall caif_sktinit_module+0x0/0x145 returned 0 after 3099 usecs
calling af_ieee802154_init+0x0/0x63 @ 1
NET: Registered protocol family 36
initcall af_ieee802154_init+0x0/0x63 returned 0 after 3070 usecs
calling mcheck_debugfs_init+0x0/0x3f @ 1
initcall mcheck_debugfs_init+0x0/0x3f returned 0 after 3 usecs
calling severities_debugfs_init+0x0/0x3f @ 1
initcall severities_debugfs_init+0x0/0x3f returned 0 after 1 usecs
calling check_early_ioremap_leak+0x0/0x6a @ 1
initcall check_early_ioremap_leak+0x0/0x6a returned 0 after 0 usecs
calling init_oops_id+0x0/0x50 @ 1
initcall init_oops_id+0x0/0x50 returned 0 after 2 usecs
calling disable_boot_consoles+0x0/0x45 @ 1
initcall disable_boot_consoles+0x0/0x45 returned 0 after 0 usecs
calling pm_qos_power_init+0x0/0xc0 @ 1
initcall pm_qos_power_init+0x0/0xc0 returned 0 after 309 usecs
calling clear_boot_tracer+0x0/0x2e @ 1
initcall clear_boot_tracer+0x0/0x2e returned 0 after 0 usecs
calling init_ima+0x0/0x14 @ 1
tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
IMA: No TPM chip found, activating TPM-bypass!
initcall init_ima+0x0/0x14 returned 0 after 9142 usecs
calling random32_reseed+0x0/0x56 @ 1
initcall random32_reseed+0x0/0x56 returned 0 after 5 usecs
calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1
initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 1 usecs
calling pci_sysfs_init+0x0/0x44 @ 1
initcall pci_sysfs_init+0x0/0x44 returned 0 after 564 usecs
calling regulator_init_complete+0x0/0x111 @ 1
initcall regulator_init_complete+0x0/0x111 returned 0 after 0 usecs
calling seqgen_init+0x0/0xe @ 1
initcall seqgen_init+0x0/0xe returned 0 after 13 usecs
calling scsi_complete_async_scans+0x0/0x1c0 @ 1
initcall scsi_complete_async_scans+0x0/0x1c0 returned 0 after 0 usecs
calling memmap_init+0x0/0x30 @ 1
initcall memmap_init+0x0/0x30 returned 0 after 21 usecs
calling dmatest_init+0x0/0x1a8 @ 1
__dma_request_channel: fail ((null))
initcall dmatest_init+0x0/0x1a8 returned 0 after 3239 usecs
calling init_net_drop_monitor+0x0/0xff @ 1
Initalizing network drop monitor service
initcall init_net_drop_monitor+0x0/0xff returned 0 after 3583 usecs
calling tcp_congestion_default+0x0/0xf @ 1
initcall tcp_congestion_default+0x0/0xf returned 0 after 0 usecs
calling initialize_hashrnd+0x0/0x16 @ 1
initcall initialize_hashrnd+0x0/0x16 returned 0 after 3 usecs
async_waiting @ 1
async_continuing @ 1 after 0 usec
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
async_waiting @ 1
async_continuing @ 1 after 0 usec
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): recovery required on readonly filesystem
EXT3-fs (sda1): write access will be enabled during recovery
EXT3-fs: barriers not enabled
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#1] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000000 EBX: 41f62d70 ECX: 00000000 EDX: 41f62000
ESI: 00000000 EDI: 41c5bc3c EBP: 41f62d54 ESP: 41f62d30
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f62d84 ffffe000 41f62000 41f62d84 41f62d70 41c5bc3c
<0> 41f62000 41f62d84 4102ca48 41c5bc3c 7f9731b0 00000000 41f62d74 41f62d84
<0> 41047a83 00000000 7f9731b0 00000046 7f9731d4 41f62d9c 41033e50 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#2] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000000 EBX: 41f62d30 ECX: fffe0560 EDX: 41f62000
ESI: 00000000 EDI: 41c5b894 EBP: 41f62b18 ESP: 41f62af4
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f62b48 ffffe000 41f62000 41f62b48 41f62d30 41c5b894
<0> 41f62000 41f62b48 4102ca48 41c5b894 41de0bec 00000000 41f62b38 41f62cf4
<0> 41de0bec 00000000 00000000 41f62cf4 41de0bec 41f62b6c 4102dc3d 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#3] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000000 EBX: 41f62af4 ECX: fffe01d3 EDX: 41f62000
ESI: 00000000 EDI: 41c5b894 EBP: 41f628dc ESP: 41f628b8
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f6290c ffffe000 41f62000 41f6290c 41f62af4 41c5b894
<0> 41f62000 41f6290c 4102ca48 41c5b894 41de0bec 00000000 41f628fc 41f62ab8
<0> 41de0bec 00000000 00000000 41f62ab8 41de0bec 41f62930 4102dc3d 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#4] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000000 EBX: 41f628b8 ECX: fffdfe46 EDX: 41f62000
ESI: 00000000 EDI: 41c5b894 EBP: 41f626a0 ESP: 41f6267c
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f626d0 ffffe000 41f62000 41f626d0 41f628b8 41c5b894
<0> 41f62000 41f626d0 4102ca48 41c5b894 41de0bec 00000000 41f626c0 41f6287c
<0> 41de0bec 00000000 00000000 41f6287c 41de0bec 41f626f4 4102dc3d 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
BUG: unable to handle kernel NULL pointer dereference at 00000340
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#5] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000000 EBX: 41f6267c ECX: fffdfab9 EDX: 41f62000
ESI: 00000000 EDI: 41c5b894 EBP: 41f62464 ESP: 41f62440
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f62494 ffffe000 41f62000 41f62494 41f6267c 41c5b894
<0> 41f62000 41f62494 4102ca48 41c5b894 41de0bec 00000000 41f62484 41f62640
<0> 41de0bec 00000000 00000000 41f62640 41de0bec 41f624b8 4102dc3d 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
BUG: unable to handle kernel NULL pointer dereference at 000003a0
IP: [<4102dde1>] print_context_stack+0x81/0x110
*pde = 00000000
Oops: 0000 [#6] PREEMPT
last sysfs file:
Pid: 0, comm: swapper Not tainted 2.6.35-rc3+ #33238 A8N-E/System Product Name
EIP: 0060:[<4102dde1>] EFLAGS: 00010016 CPU: 0
EIP is at print_context_stack+0x81/0x110
EAX: 00000060 EBX: 41f62440 ECX: fffdf72c EDX: 41f62000
ESI: 00000000 EDI: 41c5b894 EBP: 41f62228 ESP: 41f62204
DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Process swapper (pid: 0, ti=41f62000 task=41f64a80 task.ti=41f5c000)
Stack:
41047a83 41f63ffc 41f62258 ffffe000 41f62000 41f62258 41f62440 41c5b894
<0> 41f62000 41f62258 4102ca48 41c5b894 41de0bec 00000000 41f62248 41f62404
<0> 41de0bec 00000000 00000000 41f62404 41de0bec 41f6227c 4102dc3d 00000000
Call Trace:
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<41047a83>] ? enqueue_task+0x43/0x60
[<41033e50>] ? save_stack_trace+0x30/0x50
[<4146ac40>] ? dma_entry_alloc+0x80/0xd0
[<4146bb33>] ? debug_dma_map_sg+0x83/0x140
[<41690881>] ? ata_qc_issue+0x161/0x310
[<4169698e>] ? ata_scsi_translate+0x7e/0x140
[<410aaa23>] ? mempool_free_slab+0x13/0x20
[<41548810>] ? scsi_done+0x0/0x70
[<41548810>] ? scsi_done+0x0/0x70
[<416998b4>] ? ata_scsi_queuecmd+0xb4/0x2b0
[<41697e20>] ? ata_scsi_rw_xlat+0x0/0x270
[<41549538>] ? scsi_dispatch_cmd+0xd8/0x2c0
[<4154f199>] ? scsi_request_fn+0x3c9/0x530
[<410b9ddc>] ? clear_bdi_congested+0xc/0x40
[<414423ba>] ? __blk_run_queue+0x3a/0x70
[<414446f4>] ? blk_run_queue+0x34/0x70
[<4154f586>] ? scsi_run_queue+0xd6/0x380
[<41548db1>] ? __scsi_put_command+0x71/0xa0
[<4154f999>] ? scsi_next_command+0x39/0x50
[<4154fec1>] ? scsi_io_completion+0x2f1/0x510
[<4154fa95>] ? scsi_device_unbusy+0x95/0xe0
[<41547dde>] ? scsi_finish_command+0x8e/0xc0
[<41550207>] ? scsi_softirq_done+0x107/0x140
[<4144989a>] ? blk_done_softirq+0x6a/0x80
[<410545ce>] ? __do_softirq+0x7e/0x1a0
[<41054550>] ? __do_softirq+0x0/0x1a0
[<4102c9af>] ? do_softirq+0x7f/0xb0
[<41008bf6>] ? kvm_vm_ioctl_assigned_device+0x256/0x970
<IRQ>
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<41c55423>] ? error_code+0x6b/0x70
[<4102dde1>] ? print_context_stack+0x81/0x110
[<41047a83>] ? enqueue_task+0x43/0x60
[<4102ca48>] ? dump_trace+0x68/0xd0
[<4102dc3d>] ? show_trace_log_lvl+0x4d/0x60
[<4102cb3c>] ? show_stack_log_lvl+0x5c/0xf0
[<4102cc87>] ? show_registers+0xb7/0x1f0
[<4106e60e>] ? notify_die+0x2e/0x30
[<4102d8cb>] ? __die+0xab/0x100
[<4103dc72>] ? no_context+0xa2/0x160
[<4103ddc0>] ? __bad_area_nosemaphore+0x90/0x140
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4106ddd1>] ? up+0x41/0x70
[<41047669>] ? sub_preempt_count+0x9/0x50
[<4103dfe0>] ? do_page_fault+0x0/0x380
[<4103de88>] ? bad_area_nosemaphore+0x18/0x20
[<4103e2af>] ? do_page_fault+0x2cf/0x380
[<4104f883>] ? vprintk+0x173/0x3c0
[<418676c0>] ? write_msg+0x0/0x110
[<4104ec15>] ? __call_console_drivers+0x45/0x60
[<41047669>] ? sub_preempt_count+0x9/0x50
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-09-03 15:00 ` Ingo Molnar
@ 2010-09-06 18:53 ` Alexander van Heukelum
2010-09-07 4:06 ` [tip:x86/irq] x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE tip-bot for Alexander van Heukelum
2010-09-07 4:55 ` [tip:x86/irq] x86: Always use irq stacks Ingo Molnar
0 siblings, 2 replies; 24+ messages in thread
From: Alexander van Heukelum @ 2010-09-06 18:53 UTC (permalink / raw)
To: Ingo Molnar, mingo, H. Peter Anvin, linux-kernel, hch, Thomas Gleixner
Cc: linux-tip-commits
[-- Attachment #1: Type: text/plain, Size: 1265 bytes --]
On Fri, 03 Sep 2010 17:00 +0200, "Ingo Molnar" <mingo@elte.hu> wrote:
>
> * tip-bot for Christoph Hellwig <hch@lst.de> wrote:
>
> > Commit-ID: 7974891db234467eaf1fec613ec0129cb4ac2332
> > Gitweb: http://git.kernel.org/tip/7974891db234467eaf1fec613ec0129cb4ac2332
> > Author: Christoph Hellwig <hch@lst.de>
> > AuthorDate: Mon, 28 Jun 2010 14:15:54 +0200
> > Committer: Thomas Gleixner <tglx@linutronix.de>
> > CommitDate: Tue, 29 Jun 2010 12:12:59 +0200
> >
> > x86: Always use irq stacks
>
> [...]
>
> Checking out 7974891db2 and building+booting a kernel with this config
> causes shows the crash.
>
> Checking out 7974891db2~1 and building+booting a kernel with this config
> gives a working system.
>
> Note that tip:x86/irq has these commits currently:
>
> 1813a68: x86: Move alloc_desk_mask variables inside ifdef
> 2589737: x86-32: Align IRQ stacks properly
> dcfa726: x86: Remove CONFIG_4KSTACKS
> 7974891: x86: Always use irq stacks
Hello Ingo, Christoph, ...
There is still a problem with the alignment of the irq stacks. Maybe it's only
theoretical, but I think the attached patch is necessary. (Attached because
I'm sending it via a web interface.)
Please test and apply :).
Greetings,
Alexander
> Thanks,
>
> Ingo
>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-i386-Align-percpu-area-and-irq-stacks-to-THREAD_SIZE.patch --]
[-- Type: text/x-patch; name="0001-i386-Align-percpu-area-and-irq-stacks-to-THREAD_SIZE.patch", Size: 2648 bytes --]
From 1031da48a89aa437199af581169c65268f9bdbaa Mon Sep 17 00:00:00 2001
From: Alexander van Heukelum <heukelum@fastmail.fm>
Date: Mon, 6 Sep 2010 20:15:05 +0200
Subject: [PATCH] i386: Align percpu area and irq stacks to THREAD_SIZE
The irq stacks, located in the percpu-area, need to be THREAD_SIZE aligned. Add
the infrastucture to align percpu variables to larger-than-pagesize amounts within
the percpu area, and use it to specify the alignment for the irq stacks. Also
align the percpu area itself to THREAD_SIZE.
This should make irq stacks work with 8K THREAD_SIZE.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
---
arch/x86/kernel/irq_32.c | 6 ++++--
arch/x86/kernel/vmlinux.lds.S | 2 +-
include/linux/percpu-defs.h | 12 ++++++++++++
3 files changed, 17 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 3b5609f..db7ebe6 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -60,8 +60,10 @@ union irq_ctx {
static DEFINE_PER_CPU(union irq_ctx *, hardirq_ctx);
static DEFINE_PER_CPU(union irq_ctx *, softirq_ctx);
-static DEFINE_PER_CPU_PAGE_ALIGNED(union irq_ctx, hardirq_stack);
-static DEFINE_PER_CPU_PAGE_ALIGNED(union irq_ctx, softirq_stack);
+static DEFINE_PER_CPU_MULTIPAGE_ALIGNED(union irq_ctx,
+ hardirq_stack, THREAD_SIZE);
+static DEFINE_PER_CPU_MULTIPAGE_ALIGNED(union irq_ctx,
+ softirq_stack, THREAD_SIZE);
static void call_on_stack(void *func, void *stack)
{
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index d0bb522..bb89947 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -273,7 +273,7 @@ SECTIONS
}
#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
- PERCPU(PAGE_SIZE)
+ PERCPU(THREAD_SIZE)
#endif
. = ALIGN(PAGE_SIZE);
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index ce2dc65..ab20d11 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -139,6 +139,18 @@
__aligned(PAGE_SIZE)
/*
+ * Declaration/definition used for large per-CPU variables that must be
+ * aligned to something larger than the pagesize.
+ */
+#define DECLARE_PER_CPU_MULTIPAGE_ALIGNED(type, name, size) \
+ DECLARE_PER_CPU_SECTION(type, name, "..page_aligned") \
+ __aligned(size)
+
+#define DEFINE_PER_CPU_MULTIPAGE_ALIGNED(type, name, size) \
+ DEFINE_PER_CPU_SECTION(type, name, "..page_aligned") \
+ __aligned(size)
+
+/*
* Intermodule exports for per-CPU variables. sparse forgets about
* address space across EXPORT_SYMBOL(), change EXPORT_SYMBOL() to
* noop if __CHECKER__.
--
1.7.1
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [tip:x86/irq] x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE
2010-09-06 18:53 ` Alexander van Heukelum
@ 2010-09-07 4:06 ` tip-bot for Alexander van Heukelum
2010-09-07 4:55 ` [tip:x86/irq] x86: Always use irq stacks Ingo Molnar
1 sibling, 0 replies; 24+ messages in thread
From: tip-bot for Alexander van Heukelum @ 2010-09-07 4:06 UTC (permalink / raw)
To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, tj, heukelum, tglx, mingo
Commit-ID: fe8e0c25cad28e8858ecfa5863333c70685a6811
Gitweb: http://git.kernel.org/tip/fe8e0c25cad28e8858ecfa5863333c70685a6811
Author: Alexander van Heukelum <heukelum@fastmail.fm>
AuthorDate: Mon, 6 Sep 2010 20:53:42 +0200
Committer: Ingo Molnar <mingo@elte.hu>
CommitDate: Tue, 7 Sep 2010 05:07:00 +0200
x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE
The irq stacks, located in the percpu-area, need to be
THREAD_SIZE aligned. Add the infrastucture to align percpu
variables to larger-than-pagesize amounts within the percpu
area, and use it to specify the alignment for the irq stacks.
Also align the percpu area itself to THREAD_SIZE.
This should make irq stacks work with 8K THREAD_SIZE.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Cc: Tejun Heo <tj@kernel.org>
Cc: hch@lst.de
LKML-Reference: <1283799222.15941.1393621887@webmail.messagingengine.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
arch/x86/kernel/irq_32.c | 4 ++--
arch/x86/kernel/vmlinux.lds.S | 2 +-
include/linux/percpu-defs.h | 12 ++++++++++++
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 3b5609f..50fbbe6 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -60,8 +60,8 @@ union irq_ctx {
static DEFINE_PER_CPU(union irq_ctx *, hardirq_ctx);
static DEFINE_PER_CPU(union irq_ctx *, softirq_ctx);
-static DEFINE_PER_CPU_PAGE_ALIGNED(union irq_ctx, hardirq_stack);
-static DEFINE_PER_CPU_PAGE_ALIGNED(union irq_ctx, softirq_stack);
+static DEFINE_PER_CPU_MULTIPAGE_ALIGNED(union irq_ctx, hardirq_stack, THREAD_SIZE);
+static DEFINE_PER_CPU_MULTIPAGE_ALIGNED(union irq_ctx, softirq_stack, THREAD_SIZE);
static void call_on_stack(void *func, void *stack)
{
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index d0bb522..bb89947 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -273,7 +273,7 @@ SECTIONS
}
#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
- PERCPU(PAGE_SIZE)
+ PERCPU(THREAD_SIZE)
#endif
. = ALIGN(PAGE_SIZE);
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index ce2dc65..ab20d11 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -139,6 +139,18 @@
__aligned(PAGE_SIZE)
/*
+ * Declaration/definition used for large per-CPU variables that must be
+ * aligned to something larger than the pagesize.
+ */
+#define DECLARE_PER_CPU_MULTIPAGE_ALIGNED(type, name, size) \
+ DECLARE_PER_CPU_SECTION(type, name, "..page_aligned") \
+ __aligned(size)
+
+#define DEFINE_PER_CPU_MULTIPAGE_ALIGNED(type, name, size) \
+ DEFINE_PER_CPU_SECTION(type, name, "..page_aligned") \
+ __aligned(size)
+
+/*
* Intermodule exports for per-CPU variables. sparse forgets about
* address space across EXPORT_SYMBOL(), change EXPORT_SYMBOL() to
* noop if __CHECKER__.
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-09-06 18:53 ` Alexander van Heukelum
2010-09-07 4:06 ` [tip:x86/irq] x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE tip-bot for Alexander van Heukelum
@ 2010-09-07 4:55 ` Ingo Molnar
2010-09-07 8:21 ` Alexander van Heukelum
1 sibling, 1 reply; 24+ messages in thread
From: Ingo Molnar @ 2010-09-07 4:55 UTC (permalink / raw)
To: Alexander van Heukelum
Cc: mingo, H. Peter Anvin, linux-kernel, hch, Thomas Gleixner,
linux-tip-commits
* Alexander van Heukelum <heukelum@fastmail.fm> wrote:
> On Fri, 03 Sep 2010 17:00 +0200, "Ingo Molnar" <mingo@elte.hu> wrote:
> >
> > * tip-bot for Christoph Hellwig <hch@lst.de> wrote:
> >
> > > Commit-ID: 7974891db234467eaf1fec613ec0129cb4ac2332
> > > Gitweb: http://git.kernel.org/tip/7974891db234467eaf1fec613ec0129cb4ac2332
> > > Author: Christoph Hellwig <hch@lst.de>
> > > AuthorDate: Mon, 28 Jun 2010 14:15:54 +0200
> > > Committer: Thomas Gleixner <tglx@linutronix.de>
> > > CommitDate: Tue, 29 Jun 2010 12:12:59 +0200
> > >
> > > x86: Always use irq stacks
> >
> > [...]
> >
> > Checking out 7974891db2 and building+booting a kernel with this config
> > causes shows the crash.
> >
> > Checking out 7974891db2~1 and building+booting a kernel with this config
> > gives a working system.
> >
> > Note that tip:x86/irq has these commits currently:
> >
> > 1813a68: x86: Move alloc_desk_mask variables inside ifdef
> > 2589737: x86-32: Align IRQ stacks properly
> > dcfa726: x86: Remove CONFIG_4KSTACKS
> > 7974891: x86: Always use irq stacks
>
> Hello Ingo, Christoph, ...
>
> There is still a problem with the alignment of the irq stacks. Maybe it's only
> theoretical, but I think the attached patch is necessary. (Attached because
> I'm sending it via a web interface.)
>
> Please test and apply :).
This apparently solved the crash, thanks a lot Alexander!
Ingo
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [tip:x86/irq] x86: Always use irq stacks
2010-09-07 4:55 ` [tip:x86/irq] x86: Always use irq stacks Ingo Molnar
@ 2010-09-07 8:21 ` Alexander van Heukelum
0 siblings, 0 replies; 24+ messages in thread
From: Alexander van Heukelum @ 2010-09-07 8:21 UTC (permalink / raw)
To: Ingo Molnar
Cc: mingo, H. Peter Anvin, linux-kernel, hch, Thomas Gleixner,
linux-tip-commits
On Tue, 07 Sep 2010 06:55 +0200, "Ingo Molnar" <mingo@elte.hu> wrote:
>
> * Alexander van Heukelum <heukelum@fastmail.fm> wrote:
>
> > On Fri, 03 Sep 2010 17:00 +0200, "Ingo Molnar" <mingo@elte.hu> wrote:
> > >
> > > * tip-bot for Christoph Hellwig <hch@lst.de> wrote:
> > >
> > > > Commit-ID: 7974891db234467eaf1fec613ec0129cb4ac2332
> > > > Gitweb: http://git.kernel.org/tip/7974891db234467eaf1fec613ec0129cb4ac2332
> > > > Author: Christoph Hellwig <hch@lst.de>
> > > > AuthorDate: Mon, 28 Jun 2010 14:15:54 +0200
> > > > Committer: Thomas Gleixner <tglx@linutronix.de>
> > > > CommitDate: Tue, 29 Jun 2010 12:12:59 +0200
> > > >
> > > > x86: Always use irq stacks
> > >
> > > [...]
> > >
> > > Checking out 7974891db2 and building+booting a kernel with this config
> > > causes shows the crash.
> > >
> > > Checking out 7974891db2~1 and building+booting a kernel with this config
> > > gives a working system.
> > >
> > > Note that tip:x86/irq has these commits currently:
> > >
> > > 1813a68: x86: Move alloc_desk_mask variables inside ifdef
> > > 2589737: x86-32: Align IRQ stacks properly
> > > dcfa726: x86: Remove CONFIG_4KSTACKS
> > > 7974891: x86: Always use irq stacks
> >
> > Hello Ingo, Christoph, ...
> >
> > There is still a problem with the alignment of the irq stacks. Maybe it's only
> > theoretical, but I think the attached patch is necessary. (Attached because
> > I'm sending it via a web interface.)
> >
> > Please test and apply :).
>
> This apparently solved the crash, thanks a lot Alexander!
My pleasure!
Greetings,
Alexander
> Ingo
>
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2010-09-07 8:22 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-06-28 12:15 [PATCH 1/2] x86: always use irq stacks Christoph Hellwig
2010-06-29 10:21 ` [tip:x86/irq] x86: Always " tip-bot for Christoph Hellwig
2010-06-30 7:44 ` Ingo Molnar
2010-06-30 7:52 ` Christoph Hellwig
2010-06-30 7:58 ` Ingo Molnar
2010-06-30 8:04 ` Ingo Molnar
2010-07-08 20:42 ` Ingo Molnar
2010-07-08 20:53 ` Christoph Hellwig
2010-07-14 15:12 ` Christoph Hellwig
2010-07-14 15:27 ` Thomas Gleixner
2010-07-14 15:47 ` Christoph Hellwig
2010-07-14 18:21 ` Steven Rostedt
2010-07-27 12:13 ` Christoph Hellwig
2010-07-27 16:29 ` H. Peter Anvin
2010-07-27 18:36 ` [tip:x86/irq] x86-32: Align IRQ stacks properly tip-bot for Christoph Hellwig
2010-07-23 14:15 ` [tip:x86/irq] x86: Always use irq stacks Steven Rostedt
2010-07-23 14:24 ` Steven Rostedt
2010-07-23 16:39 ` Christoph Hellwig
2010-07-14 19:02 ` David Miller
2010-09-03 15:00 ` Ingo Molnar
2010-09-06 18:53 ` Alexander van Heukelum
2010-09-07 4:06 ` [tip:x86/irq] x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE tip-bot for Alexander van Heukelum
2010-09-07 4:55 ` [tip:x86/irq] x86: Always use irq stacks Ingo Molnar
2010-09-07 8:21 ` Alexander van Heukelum
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.