Re: [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7

[Tony Lindgren <tony@atomide.com>]

* Russell King - ARM Linux <linux@arm.linux.org.uk> [100902 10:54]:
> On Thu, Sep 02, 2010 at 10:21:33AM -0700, Tony Lindgren wrote:
> > * Russell King - ARM Linux <linux@arm.linux.org.uk> [100902 09:50]:
> > > On Thu, Sep 02, 2010 at 09:22:20AM -0700, Tony Lindgren wrote:
> > > > >From 8b22546af2ba9a0d96c2f419bfcec1f3c01a414d Mon Sep 17 00:00:00 2001
> > > > From: Tony Lindgren <tony@atomide.com>
> > > > Date: Mon, 30 Aug 2010 14:03:28 -0700
> > > > Subject: [PATCH 5/6] ARM: Don't set TLB ops broadcasting on UP ARMv7
> > > > 
> > > > Don't set TLB ops broadcasting on UP ARMv7. Looks like these bits
> > > > are also different on A8 and A9.
> > > 
> > > This is already taken care of.
> > > 
> > > > diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
> > > > index 07fc660..51a063d 100644
> > > > --- a/arch/arm/mm/proc-v7.S
> > > > +++ b/arch/arm/mm/proc-v7.S
> > > > @@ -191,7 +191,8 @@ __v7_setup:
> > > >  	UP(mov	r0, #(1 << 6))			@ fake it for UP
> > > 
> > > If it's UP, we set r0 to 1 << 6, which...
> > > 
> > > >  	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
> > > 
> > > means this test produces a non-zero result.
> > > 
> > > >  	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
> > > > -	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
> > > 
> > > And therefore these instructions will not be executed.
> > 
> > AFAIK these bits are different for Cortex-A8 and A9, bit 6 is IBE on A8.
> 
> So what?

Ah right, sorry I should have looked more carefully. You're right, this patch
is no longer needed either.

Tony