* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
@ 2011-05-25 4:57 ` bugzilla at busybox.net
2011-05-26 22:13 ` bugzilla at busybox.net
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-05-25 4:57 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
--- Comment #1 from Kelvin Cheung <keguang.zhang@gmail.com> ---
Created attachment 3319
--> https://bugs.busybox.net/attachment.cgi?id=3319
.config
config of crosstool-ng-1.11.3
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
2011-05-25 4:57 ` [Buildroot] [Bug 3781] " bugzilla at busybox.net
@ 2011-05-26 22:13 ` bugzilla at busybox.net
2011-05-27 1:38 ` bugzilla at busybox.net
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-05-26 22:13 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
Yann E. MORIN <yann.morin.1998@anciens.enib.fr> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
AssignedTo|unassigned at buildroot.uclibc |yann.morin.1998 at anciens.eni
|.org |b.fr
--- Comment #2 from Yann E. MORIN <yann.morin.1998@anciens.enib.fr> ---
Created attachment 3325
--> https://bugs.busybox.net/attachment.cgi?id=3325
Force symlink creation
Please, try applying this patch to crosstool-NG, and re-run.
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
2011-05-25 4:57 ` [Buildroot] [Bug 3781] " bugzilla at busybox.net
2011-05-26 22:13 ` bugzilla at busybox.net
@ 2011-05-27 1:38 ` bugzilla at busybox.net
2011-05-27 4:55 ` bugzilla at busybox.net
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-05-27 1:38 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
--- Comment #3 from Kelvin Cheung <keguang.zhang@gmail.com> ---
(In reply to comment #2)
> Created attachment 3325 [details]
> Force symlink creation
>
> Please, try applying this patch to crosstool-NG, and re-run.
After applying this patch, the error becomes:
[ALL ] make[4]: Leaving directory
`/opt/buildroot_real6410/output_fs2410/build/crosstool-ng-1.11.3/.build/arm-unknown-linux-uclibcgnueabi/build/build-cc'
[ALL ]
`/opt/buildroot_real6410/output_fs2410/host/usr/bin/arm-unknown-linux-uclibcgnueabi-cc'
-> `arm-unknown-linux-uclibcgnueabi-gcc'
[INFO ] Installing final compiler: done in 294.83s (at 16:54)
[INFO ] =================================================================
[INFO ] Cleaning-up the toolchain's directory
[EXTRA] Installing the populate helper
[EXTRA] Installing a cross-ldd helper
[EXTRA] Creating toolchain aliases
[ALL ] ln: creating symbolic link `arm-linux-addr2line': File exists
[ERROR]
[ERROR] >> Build failed in step 'Cleaning-up the toolchain's directory'
[ERROR] >>
[ERROR] >> Error happened in: CT_DoExecLog[scripts/functions]
[ERROR] >> called from: do_finish[scripts/build/internals.sh at 89]
[ERROR] >> called from: main[scripts/crosstool-NG.sh at 582]
[ERROR] >>
[ERROR] >> For more info on this error, look at the file: 'build.log'
[ERROR] >> There is a list of known issues, some with workarounds, in:
[ERROR] >> 'docs/B - Known issues.txt'
[ERROR]
[ERROR] Build failed in step 'Cleaning-up the toolchain's directory'
[ERROR]
[ERROR] (elapsed: 16:53.29)
make[3]: *** [build] Error 1
make[2]: *** [build.2] Error 2
make[1]: ***
[/opt/buildroot_real6410/output_fs2410/stamps/ct-ng-toolchain-built] Error 2
make: *** [all] Error 2
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
` (2 preceding siblings ...)
2011-05-27 1:38 ` bugzilla at busybox.net
@ 2011-05-27 4:55 ` bugzilla at busybox.net
2011-07-24 22:19 ` bugzilla at busybox.net
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-05-27 4:55 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
--- Comment #4 from Kelvin Cheung <keguang.zhang@gmail.com> ---
(In reply to comment #3)
> (In reply to comment #2)
> > Created attachment 3325 [details] [details]
> > Force symlink creation
> >
> > Please, try applying this patch to crosstool-NG, and re-run.
>
> After applying this patch, the error becomes:
>
> [ALL ] make[4]: Leaving directory
> `/opt/buildroot_real6410/output_fs2410/build/crosstool-ng-1.11.3/.build/arm-unknown-linux-uclibcgnueabi/build/build-cc'
> [ALL ]
> `/opt/buildroot_real6410/output_fs2410/host/usr/bin/arm-unknown-linux-uclibcgnueabi-cc'
> -> `arm-unknown-linux-uclibcgnueabi-gcc'
> [INFO ] Installing final compiler: done in 294.83s (at 16:54)
> [INFO ] =================================================================
> [INFO ] Cleaning-up the toolchain's directory
> [EXTRA] Installing the populate helper
> [EXTRA] Installing a cross-ldd helper
> [EXTRA] Creating toolchain aliases
> [ALL ] ln: creating symbolic link `arm-linux-addr2line': File exists
> [ERROR]
> [ERROR] >> Build failed in step 'Cleaning-up the toolchain's directory'
> [ERROR] >>
> [ERROR] >> Error happened in: CT_DoExecLog[scripts/functions]
> [ERROR] >> called from: do_finish[scripts/build/internals.sh at 89]
> [ERROR] >> called from: main[scripts/crosstool-NG.sh at 582]
> [ERROR] >>
> [ERROR] >> For more info on this error, look at the file: 'build.log'
> [ERROR] >> There is a list of known issues, some with workarounds, in:
> [ERROR] >> 'docs/B - Known issues.txt'
> [ERROR]
> [ERROR] Build failed in step 'Cleaning-up the toolchain's directory'
> [ERROR]
> [ERROR] (elapsed: 16:53.29)
> make[3]: *** [build] Error 1
> make[2]: *** [build.2] Error 2
> make[1]: ***
> [/opt/buildroot_real6410/output_fs2410/stamps/ct-ng-toolchain-built] Error 2
> make: *** [all] Error 2
After fixing this problem as your patch did, the compilation still failed as
last:
[ALL ]
`/opt/buildroot_real6410/output_fs2410/host/usr/bin/arm-unknown-linux-uclibcgnueabi-cc'
-> `arm-unknown-linux-uclibcgnueabi-gcc'
[INFO ] Installing final compiler: done in 314.20s (at 16:05)
[INFO ] =================================================================
[INFO ] Cleaning-up the toolchain's directory
[EXTRA] Installing the populate helper
[EXTRA] Installing a cross-ldd helper
[EXTRA] Creating toolchain aliases
[ALL ] `arm-linux-addr2line' -> `arm-unknown-linux-uclibcgnueabi-addr2line'
[ALL ] `arm-linux-ar' -> `arm-unknown-linux-uclibcgnueabi-ar'
[ALL ] `arm-linux-as' -> `arm-unknown-linux-uclibcgnueabi-as'
[ALL ] `arm-linux-c++' -> `arm-unknown-linux-uclibcgnueabi-c++'
[ALL ] `arm-linux-c++filt' -> `arm-unknown-linux-uclibcgnueabi-c++filt'
[ALL ] `arm-linux-cc' -> `arm-unknown-linux-uclibcgnueabi-cc'
[ALL ] `arm-linux-cpp' -> `arm-unknown-linux-uclibcgnueabi-cpp'
[ALL ] `arm-linux-ct-ng.config' ->
`arm-unknown-linux-uclibcgnueabi-ct-ng.config'
[ALL ] `arm-linux-g++' -> `arm-unknown-linux-uclibcgnueabi-g++'
[ALL ] `arm-linux-gcc' -> `arm-unknown-linux-uclibcgnueabi-gcc'
[ALL ] `arm-linux-gcc-4.4.3' -> `arm-unknown-linux-uclibcgnueabi-gcc-4.4.3'
[ALL ] `arm-linux-gccbug' -> `arm-unknown-linux-uclibcgnueabi-gccbug'
[ALL ] `arm-linux-gcov' -> `arm-unknown-linux-uclibcgnueabi-gcov'
[ALL ] `arm-linux-gprof' -> `arm-unknown-linux-uclibcgnueabi-gprof'
[ALL ] `arm-linux-ld' -> `arm-unknown-linux-uclibcgnueabi-ld'
[ALL ] `arm-linux-ldd' -> `arm-unknown-linux-uclibcgnueabi-ldd'
[ALL ] `arm-linux-nm' -> `arm-unknown-linux-uclibcgnueabi-nm'
[ALL ] `arm-linux-objcopy' -> `arm-unknown-linux-uclibcgnueabi-objcopy'
[ALL ] `arm-linux-objdump' -> `arm-unknown-linux-uclibcgnueabi-objdump'
[ALL ] `arm-linux-populate' -> `arm-unknown-linux-uclibcgnueabi-populate'
[ALL ] `arm-linux-ranlib' -> `arm-unknown-linux-uclibcgnueabi-ranlib'
[ALL ] `arm-linux-readelf' -> `arm-unknown-linux-uclibcgnueabi-readelf'
[ALL ] `arm-linux-size' -> `arm-unknown-linux-uclibcgnueabi-size'
[ALL ] `arm-linux-sstrip' -> `arm-unknown-linux-uclibcgnueabi-sstrip'
[ALL ] `arm-linux-strings' -> `arm-unknown-linux-uclibcgnueabi-strings'
[ALL ] `arm-linux-strip' -> `arm-unknown-linux-uclibcgnueabi-strip'
[EXTRA] Removing access to the build system tools
[EXTRA] Removing installed documentation
[INFO ] Cleaning-up the toolchain's directory: done in 1.35s (at 16:06)
[INFO ] Build completed at 20110527.124433
[INFO ] (elapsed: 16:05.58)
[INFO ] Finishing installation (may take a few seconds)...
[ERROR]
[ERROR] >>
[ERROR] >> Error happened in: main[scripts/crosstool-NG.sh]
[ERROR] >>
[ERROR] >> For more info on this error, look at the file: 'build.log'
[ERROR] >> There is a list of known issues, some with workarounds, in:
[ERROR] >> 'docs/B - Known issues.txt'
[ERROR]
[ERROR] Build failed in step 'Cleaning-up the toolchain's directory'
[ERROR]
[ERROR] (elapsed: 16:06.08)
make[3]: *** [build] Error 1
make[2]: *** [build.2] Error 2
make[1]: ***
[/opt/buildroot_real6410/output_fs2410/stamps/ct-ng-toolchain-built] Error 2
make: *** [all] Error 2
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
` (3 preceding siblings ...)
2011-05-27 4:55 ` bugzilla at busybox.net
@ 2011-07-24 22:19 ` bugzilla at busybox.net
2011-07-25 8:00 ` bugzilla at busybox.net
2011-07-25 8:08 ` bugzilla at busybox.net
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-07-24 22:19 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
Yann E. MORIN <yann.morin.1998@anciens.enib.fr> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|ASSIGNED |RESOLVED
Resolution| |FIXED
--- Comment #5 from Yann E. MORIN <yann.morin.1998@anciens.enib.fr> ---
We believe this bug was solved as a side effect of:
http://git.buildroot.org/buildroot/commit/?id=ea23f34e25839a9559c3bb61cc5d9f54c89e137b
Please, give it a try, and re-open if it still fails for you.
Thank you!
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
` (4 preceding siblings ...)
2011-07-24 22:19 ` bugzilla at busybox.net
@ 2011-07-25 8:00 ` bugzilla at busybox.net
2011-07-25 8:08 ` bugzilla at busybox.net
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-07-25 8:00 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
--- Comment #6 from Kelvin Cheung <keguang.zhang@gmail.com> ---
(In reply to comment #5)
> We believe this bug was solved as a side effect of:
>
> http://git.buildroot.org/buildroot/commit/?id=ea23f34e25839a9559c3bb61cc5d9f54c89e137b
>
> Please, give it a try, and re-open if it still fails for you.
>
> Thank you!
It works this time.
But the following build of busybox is failed.
The error messages are as follows:
==========
libbb/lib.a(inet_common.o): In function `INET_rresolve':
inet_common.c:(.text.INET_rresolve+0xd8): warning: gethostbyaddr is
obsolescent, use getaddrinfo() instead.
util-linux/lib.a(mount.o): In function `nfsmount':
mount.c:(.text.nfsmount+0xcc): warning: gethostbyname is obsolescent, use
getnameinfo() instead.
miscutils/lib.a(watchdog.o): In function `watchdog_main':
watchdog.c:(.text.watchdog_main+0xfc): undefined reference to `usleep'
networking/lib.a(ifupdown.o): In function `dhcp_down':
ifupdown.c:(.text.dhcp_down+0x24): undefined reference to `usleep'
networking/lib.a(traceroute.o): In function `traceroute_main':
traceroute.c:(.text.traceroute_main+0x434): undefined reference to `usleep'
procps/lib.a(top.o): In function `top_main':
top.c:(.text.top_main+0x21c): undefined reference to `usleep'
util-linux/lib.a(mdev.o): In function `mdev_main':
mdev.c:(.text.mdev_main+0x194): undefined reference to `usleep'
coreutils/lib.a(usleep.o):usleep.c:(.text.usleep_main+0x18): more undefined
references to `usleep' follow
collect2: ld returned 1 exit status
make[2]: *** [busybox_unstripped] Error 1
make[1]: *** [/opt/buildroot/output_hi3520/build/busybox-1.18.5/.stamp_built]
Error 2
make: *** [all] Error 2
Then, I use arm-linux-readelf to check whether 'libuClibc-0.9.31.so' contains
the symbol 'usleep'. And the answer is negative.
Why 'usleep.c' was not compiled?
BTW, erverything is ok when uClibc-0.9.30.3 was used.
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread* [Buildroot] [Bug 3781] crosstool-ng-1.11.3 fails to build
2011-05-25 4:53 [Buildroot] [Bug 3781] New: crosstool-ng-1.11.3 fails to build bugzilla at busybox.net
` (5 preceding siblings ...)
2011-07-25 8:00 ` bugzilla at busybox.net
@ 2011-07-25 8:08 ` bugzilla at busybox.net
6 siblings, 0 replies; 8+ messages in thread
From: bugzilla at busybox.net @ 2011-07-25 8:08 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=3781
--- Comment #7 from Peter Korsgaard <jacmet@uclibc.org> ---
(In reply to comment #6)
> Then, I use arm-linux-readelf to check whether 'libuClibc-0.9.31.so' contains
> the symbol 'usleep'. And the answer is negative.
>
> Why 'usleep.c' was not compiled?
>
> BTW, erverything is ok when uClibc-0.9.30.3 was used.
You need to ensure that UCLIBC_SUSV3_LEGACY=y is set in your uclibc
configuration, otherwise uClibc isn't built with usleep support.
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply [flat|nested] 8+ messages in thread