[PATCH 0/4] powerpc, mpc5200: add support for a4m072 board

[PATCH 0/4] powerpc, mpc5200: add support for a4m072 board

[Heiko Schocher]

- Add PHY support (AMD am79c874)
- Add DTS to support a4m072 board
- Update mpc5200_defconfig
- Add config options needed for a4m072 board support
  to mpc5200_defconfig 

cc: Wolfgang Denk <wd@denx.de>

Heiko Schocher (4):
  net, phy: am79c874 support
  powerpc, mpc5200: add a4m072 board support
  powerpc, mpc5200: update mpc5200_defconfig
  powerpc, mpc5200: add options to mpc5200_defconfig

 arch/powerpc/boot/dts/a4m072.dts             |  273 ++++++++++++++++++++++++++
 arch/powerpc/configs/mpc5200_defconfig       |   15 +-
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
 drivers/net/phy/Kconfig                      |    5 +
 drivers/net/phy/Makefile                     |    1 +
 drivers/net/phy/amd79.c                      |  109 ++++++++++
 6 files changed, 395 insertions(+), 9 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/a4m072.dts
 create mode 100644 drivers/net/phy/amd79.c

-- 
1.7.5.4

[PATCH 1/4] net, phy: am79c874 support

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: linux-netdev@vger.kernel.org
cc: Wolfgang Denk <wd@denx.de>
---
 drivers/net/phy/Kconfig  |    5 ++
 drivers/net/phy/Makefile |    1 +
 drivers/net/phy/amd79.c  |  109 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 115 insertions(+), 0 deletions(-)
 create mode 100644 drivers/net/phy/amd79.c

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index a702443..ee70d04 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -15,6 +15,11 @@ if PHYLIB
 
 comment "MII PHY device drivers"
 
+config AMD_PHY
+	tristate "Drivers for the AMD79 PHYs"
+	---help---
+	  Currently supports the amd79c874
+
 config MARVELL_PHY
 	tristate "Drivers for Marvell PHYs"
 	---help---
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 2333215..79bc8b4 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_DP83640_PHY)	+= dp83640.o
 obj-$(CONFIG_STE10XP)		+= ste10Xp.o
 obj-$(CONFIG_MICREL_PHY)	+= micrel.o
 obj-$(CONFIG_MDIO_OCTEON)	+= mdio-octeon.o
+obj-$(CONFIG_AMD_PHY)		+= amd79.o
diff --git a/drivers/net/phy/amd79.c b/drivers/net/phy/amd79.c
new file mode 100644
index 0000000..914d696
--- /dev/null
+++ b/drivers/net/phy/amd79.c
@@ -0,0 +1,109 @@
+/*
+ * Driver for AMD am79 PHYs
+ *
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (c) 2011 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/uaccess.h>
+
+#include <asm/irq.h>
+
+#define MII_AMD79_IR		17  /* Interrupt Status/Control Register */
+#define MII_AMD79_IR_EN_LINK	0x0400	/* IR enable Linkstate */
+#define MII_AMD79_IR_ACK_LINK	0x0004	/* IR ack Linkstate */
+
+MODULE_DESCRIPTION("AMD PHY driver");
+MODULE_AUTHOR("Heiko Schocher <hs@denx.de>");
+MODULE_LICENSE("GPL");
+
+static int amd79_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, MII_BMSR);
+	if (err < 0)
+		return err;
+
+	err = phy_read(phydev, MII_AMD79_IR);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int amd79_config_init(struct phy_device *phydev)
+{
+	int err = 0;
+
+	return err;
+}
+
+static int amd79_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, MII_AMD79_IR_EN_LINK,
+			MII_AMD79_IR_EN_LINK);
+	else
+		err = phy_write(phydev, MII_AMD79_IR_EN_LINK, 0);
+
+	return err;
+}
+
+static struct phy_driver amd79_driver = {
+	.phy_id		= 0x0022561b,
+	.name		= "AMD79C874",
+	.phy_id_mask	= 0xfffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= amd79_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= amd79_ack_interrupt,
+	.config_intr	= amd79_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init amd79_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&amd79_driver);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void __exit amd79_exit(void)
+{
+	phy_driver_unregister(&amd79_driver);
+}
+
+module_init(amd79_init);
+module_exit(amd79_exit);
-- 
1.7.5.4

Re: [PATCH 1/4] net, phy: am79c874 support

[Heiko Schocher]

Hello,

Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: linux-netdev@vger.kernel.org
> cc: Wolfgang Denk <wd@denx.de>
> ---
>  drivers/net/phy/Kconfig  |    5 ++
>  drivers/net/phy/Makefile |    1 +
>  drivers/net/phy/amd79.c  |  109 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 115 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/net/phy/amd79.c

Are there some more comments or is this patch ready for going
to mainline?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [PATCH 1/4] net, phy: am79c874 support

[Anatolij Gustschin]

Hello Heiko,

On Tue, 26 Jul 2011 06:55:04 +0200
Heiko Schocher <hs@denx.de> wrote:

> Hello,
> 
> Heiko Schocher wrote:
> > Signed-off-by: Heiko Schocher <hs@denx.de>
> > cc: linux-netdev@vger.kernel.org
> > cc: Wolfgang Denk <wd@denx.de>
> > ---
> >  drivers/net/phy/Kconfig  |    5 ++
> >  drivers/net/phy/Makefile |    1 +
> >  drivers/net/phy/amd79.c  |  109 ++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 115 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/net/phy/amd79.c
> 
> Are there some more comments or is this patch ready for going
> to mainline?

This patch is not ready yet and it seems it didn't reach the netdev
list, probably because of wrong netdev address. I reworked it a bit
and have sent a new version to the netdev list.

Thanks,
Anatolij

Re: [PATCH 1/4] net, phy: am79c874 support

[Anatolij Gustschin]

Hello Heiko,

some comments below.

On Wed, 22 Jun 2011 09:55:08 +0200
Heiko Schocher <hs@denx.de> wrote:
...
> diff --git a/drivers/net/phy/amd79.c b/drivers/net/phy/amd79.c
> new file mode 100644
> index 0000000..914d696
> --- /dev/null
> +++ b/drivers/net/phy/amd79.c
...
> +#include <linux/kernel.h>
> +#include <linux/string.h>
> +#include <linux/errno.h>
> +#include <linux/unistd.h>
> +#include <linux/interrupt.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include <linux/netdevice.h>
> +#include <linux/etherdevice.h>
> +#include <linux/skbuff.h>
> +#include <linux/spinlock.h>
> +#include <linux/mm.h>
> +#include <linux/module.h>
> +#include <linux/mii.h>
> +#include <linux/ethtool.h>
> +#include <linux/phy.h>
> +#include <linux/uaccess.h>
> +
> +#include <asm/irq.h>

We should remove not needed headers here.

...
> +static int amd79_config_intr(struct phy_device *phydev)
> +{
> +	int err;
> +
> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> +		err = phy_write(phydev, MII_AMD79_IR_EN_LINK,
> +			MII_AMD79_IR_EN_LINK);
> +	else
> +		err = phy_write(phydev, MII_AMD79_IR_EN_LINK, 0);

Here is an issue, we should write to the interrupt control/status
register, so the 2nd argument of phy_write() should be MII_AMD79_IR.
I've fixed this and resubmitted your patch to the netdev list.

Thanks,
Anatolij

[PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
cc: devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org
cc: Wolfgang Denk <wd-ynQEQJNshbs@public.gmane.org>
---
For this patchseries following patch is needed:

http://patchwork.ozlabs.org/patch/91919/

Grant? Do you have some comments on that patch?

 arch/powerpc/boot/dts/a4m072.dts             |  273 ++++++++++++++++++++++++++
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
 2 files changed, 274 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/a4m072.dts

diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
new file mode 100644
index 0000000..cea1c6f
--- /dev/null
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -0,0 +1,273 @@
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8-nYOzD4b6Jr9Wk0Htik3J/w@public.gmane.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>; /* From boot loader */
+			bus-frequency = <0>; /* From boot loader */
+			clock-frequency = <0>; /* From boot loader */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+			fsl,ext_48mhz_en = <0x0>;
+			fsl,fd_enable = <0x01>;
+			fsl,fd_counters = <0xbbbb>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x80>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			fsl,port_config = <0x19051444>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;
+			interrupts = <2 5 0>;
+
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			 hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			 rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004
+			 >;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..192b4ff 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anonymous,a4m072",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",
-- 
1.7.5.4

[PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: devicetree-discuss@ozlabs.org
cc: Wolfgang Denk <wd@denx.de>
---
For this patchseries following patch is needed:

http://patchwork.ozlabs.org/patch/91919/

Grant? Do you have some comments on that patch?

 arch/powerpc/boot/dts/a4m072.dts             |  273 ++++++++++++++++++++++++++
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
 2 files changed, 274 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/a4m072.dts

diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
new file mode 100644
index 0000000..cea1c6f
--- /dev/null
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -0,0 +1,273 @@
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>; /* From boot loader */
+			bus-frequency = <0>; /* From boot loader */
+			clock-frequency = <0>; /* From boot loader */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+			fsl,ext_48mhz_en = <0x0>;
+			fsl,fd_enable = <0x01>;
+			fsl,fd_counters = <0xbbbb>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x80>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			fsl,port_config = <0x19051444>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;
+			interrupts = <2 5 0>;
+
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+
+			 hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			 rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004
+			 >;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..192b4ff 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anonymous,a4m072",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",
-- 
1.7.5.4

Re: [PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 684 bytes --]

On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs-ynQEQJNshbs@public.gmane.org>
> cc: Grant Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
> cc: devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org
> cc: Wolfgang Denk <wd-ynQEQJNshbs@public.gmane.org>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?

Can you use the mpc5200-include?

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 192 bytes --]

_______________________________________________
devicetree-discuss mailing list
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
https://lists.ozlabs.org/listinfo/devicetree-discuss

Re: [PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 586 bytes --]

On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: devicetree-discuss@ozlabs.org
> cc: Wolfgang Denk <wd@denx.de>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?

Can you use the mpc5200-include?

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

Re: [PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Heiko Schocher]

Hello Wolfram,

Wolfram Sang wrote:
> On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> cc: Grant Likely <grant.likely@secretlab.ca>
>> cc: devicetree-discuss@ozlabs.org
>> cc: Wolfgang Denk <wd@denx.de>
>> ---
>> For this patchseries following patch is needed:
>>
>> http://patchwork.ozlabs.org/patch/91919/
>>
>> Grant? Do you have some comments on that patch?
> 
> Can you use the mpc5200-include?

Sorry, cannot parse this ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Wolfram Sang]

[-- Attachment #1.1: Type: text/plain, Size: 366 bytes --]

> >> Grant? Do you have some comments on that patch?
> > 
> > Can you use the mpc5200-include?
> 
> Sorry, cannot parse this ...

Check other mpc5200-boards, like pcm030:

/include/ "mpc5200b.dtsi"

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Re: [PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 366 bytes --]

> >> Grant? Do you have some comments on that patch?
> > 
> > Can you use the mpc5200-include?
> 
> Sorry, cannot parse this ...

Check other mpc5200-boards, like pcm030:

/include/ "mpc5200b.dtsi"

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

[PATCH v2 2/4] powerpc, mpc52xx: add a4m072 board support

[Heiko Schocher]

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Grant Likely <grant.likely@secretlab.ca>
cc: devicetree-discuss@ozlabs.org
cc: Wolfgang Denk <wd@denx.de>
cc: Wolfram Sang <w.sang@pengutronix.de>
---
For this patchseries following patch is needed:

http://patchwork.ozlabs.org/patch/91919/

Grant? Do you have some comments on that patch?

changes for v2:
  add comment from Wolfram Sang:
  use mpc5200.dtsi

 arch/powerpc/boot/dts/a4m072.dts             |  172 ++++++++++++++++++++++++++
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
 2 files changed, 173 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/a4m072.dts

diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
new file mode 100644
index 0000000..adb6746
--- /dev/null
+++ b/arch/powerpc/boot/dts/a4m072.dts
@@ -0,0 +1,172 @@
+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			fsl,ext_48mhz_en = <0x0>;
+			fsl,fd_enable = <0x01>;
+			fsl,fd_counters = <0xbbbb>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x80>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			 hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			 rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004
+			 >;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index e36d6e2..192b4ff 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
 
 /* list of the supported boards */
 static const char *board[] __initdata = {
+	"anonymous,a4m072",
 	"intercontrol,digsy-mtc",
 	"manroland,mucmc52",
 	"manroland,uc101",
-- 
1.7.5.4

Re: [PATCH v2 2/4] powerpc, mpc52xx: add a4m072 board support

[Heiko Schocher]

Hello,

Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: devicetree-discuss@ozlabs.org
> cc: Wolfgang Denk <wd@denx.de>
> cc: Wolfram Sang <w.sang@pengutronix.de>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?
> 
> changes for v2:
>   add comment from Wolfram Sang:
>   use mpc5200.dtsi
> 
>  arch/powerpc/boot/dts/a4m072.dts             |  172 ++++++++++++++++++++++++++
>  arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
>  2 files changed, 173 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/a4m072.dts

Are there some more comments or is this ready for going
to mainline?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [PATCH v2 2/4] powerpc, mpc52xx: add a4m072 board support

[Grant Likely]

On Wed, Jun 22, 2011 at 12:39:10PM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: devicetree-discuss@ozlabs.org
> cc: Wolfgang Denk <wd@denx.de>
> cc: Wolfram Sang <w.sang@pengutronix.de>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?
> 
> changes for v2:
>   add comment from Wolfram Sang:
>   use mpc5200.dtsi
> 
>  arch/powerpc/boot/dts/a4m072.dts             |  172 ++++++++++++++++++++++++++
>  arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
>  2 files changed, 173 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/a4m072.dts
> 
> diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
> new file mode 100644
> index 0000000..adb6746
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/a4m072.dts
> @@ -0,0 +1,172 @@
> +/*
> + * a4m072 board Device Tree Source
> + *
> + * Copyright (C) 2011 DENX Software Engineering GmbH
> + * Heiko Schocher <hs@denx.de>
> + *
> + * Copyright (C) 2007 Semihalf
> + * Marian Balakowicz <m8@semihalf.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +/include/ "mpc5200b.dtsi"

Ah, I missed this follow up patch.  Yes, this is better.

> +
> +/ {
> +	model = "anonymous,a4m072";
> +	compatible = "anonymous,a4m072";
> +
> +	soc5200@f0000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "fsl,mpc5200b-immr";
> +		ranges = <0 0xf0000000 0x0000c000>;
> +		reg = <0xf0000000 0x00000100>;
> +		bus-frequency = <0>; /* From boot loader */
> +		system-frequency = <0>; /* From boot loader */
> +
> +		cdm@200 {
> +			fsl,ext_48mhz_en = <0x0>;
> +			fsl,fd_enable = <0x01>;
> +			fsl,fd_counters = <0xbbbb>;

Are these new properties documented?  They need to be.  Also,
convention is to use '-' instead of '_' in property names.

> +		};
> +
> +		timer@600 {
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x600 0x80>;
> +			interrupts = <1 9 0>;
> +			fsl,has-wdt;
> +		};

Isn't this node already in the mpc5200b.dtsi file?

Otherwise, this patch looks pretty good.

g.

Re: [PATCH v2 2/4] powerpc, mpc52xx: add a4m072 board support

[Heiko Schocher]

Hello Grant,

Grant Likely wrote:
> On Wed, Jun 22, 2011 at 12:39:10PM +0200, Heiko Schocher wrote:
>> Signed-off-by: Heiko Schocher <hs@denx.de>
>> cc: Grant Likely <grant.likely@secretlab.ca>
>> cc: devicetree-discuss@ozlabs.org
>> cc: Wolfgang Denk <wd@denx.de>
>> cc: Wolfram Sang <w.sang@pengutronix.de>
>> ---
>> For this patchseries following patch is needed:
>>
>> http://patchwork.ozlabs.org/patch/91919/
>>
>> Grant? Do you have some comments on that patch?
>>
>> changes for v2:
>>   add comment from Wolfram Sang:
>>   use mpc5200.dtsi
>>
>>  arch/powerpc/boot/dts/a4m072.dts             |  172 ++++++++++++++++++++++++++
>>  arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
>>  2 files changed, 173 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/powerpc/boot/dts/a4m072.dts
>>
>> diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
>> new file mode 100644
>> index 0000000..adb6746
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/a4m072.dts
>> @@ -0,0 +1,172 @@
>> +/*
>> + * a4m072 board Device Tree Source
>> + *
>> + * Copyright (C) 2011 DENX Software Engineering GmbH
>> + * Heiko Schocher <hs@denx.de>
>> + *
>> + * Copyright (C) 2007 Semihalf
>> + * Marian Balakowicz <m8@semihalf.com>
>> + *
>> + * This program is free software; you can redistribute  it and/or modify it
>> + * under  the terms of  the GNU General  Public License as published by the
>> + * Free Software Foundation;  either version 2 of the  License, or (at your
>> + * option) any later version.
>> + */
>> +
>> +/include/ "mpc5200b.dtsi"
> 
> Ah, I missed this follow up patch.  Yes, this is better.

;-)

>> +
>> +/ {
>> +	model = "anonymous,a4m072";
>> +	compatible = "anonymous,a4m072";

The customer don;t want, that his name appear, so I decided here,
to use "anonymous" ... what name should used here?

>> +
>> +	soc5200@f0000000 {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		compatible = "fsl,mpc5200b-immr";
>> +		ranges = <0 0xf0000000 0x0000c000>;
>> +		reg = <0xf0000000 0x00000100>;
>> +		bus-frequency = <0>; /* From boot loader */
>> +		system-frequency = <0>; /* From boot loader */
>> +
>> +		cdm@200 {
>> +			fsl,ext_48mhz_en = <0x0>;
>> +			fsl,fd_enable = <0x01>;
>> +			fsl,fd_counters = <0xbbbb>;
> 
> Are these new properties documented?  They need to be.  Also,
> convention is to use '-' instead of '_' in property names.

Yes, see patch here:

>> For this patchseries following patch is needed:
>>
>> http://patchwork.ozlabs.org/patch/91919/

>> +		};
>> +
>> +		timer@600 {
>> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
>> +			reg = <0x600 0x80>;
>> +			interrupts = <1 9 0>;
>> +			fsl,has-wdt;
>> +		};
> 
> Isn't this node already in the mpc5200b.dtsi file?

Yes, you are right, remove this.

> Otherwise, this patch looks pretty good.

Thanks for your review! I wait for a comment on patch
http://patchwork.ozlabs.org/patch/91919/ from you and rework this
2 patches.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Re: [PATCH v2 2/4] powerpc, mpc52xx: add a4m072 board support

[Anatolij Gustschin]

Hi Heiko,

On Wed, 22 Jun 2011 12:39:10 +0200
Heiko Schocher <hs@denx.de> wrote:
...
> diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
> new file mode 100644
> index 0000000..adb6746
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/a4m072.dts
...
> +		cdm@200 {
> +			fsl,ext_48mhz_en = <0x0>;
> +			fsl,fd_enable = <0x01>;
> +			fsl,fd_counters = <0xbbbb>;

When applying this patch I've fixed these properties according to
previously added bindings (fsl,init-*-*), but one question remains:
is fd-counters value really 0xbbbb? Here, the 3rd bit in each nibble
should always be cleared as mentioned in the register description.

...
> +		timer@600 {
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x600 0x80>;
> +			interrupts = <1 9 0>;

I've removed above three lines as these are already in the dtsi file.

Thanks,
Anatolij

Re: [PATCH 2/4] powerpc, mpc52xx: add a4m072 board support

[Grant Likely]

On Wed, Jun 22, 2011 at 09:55:09AM +0200, Heiko Schocher wrote:
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: devicetree-discuss@ozlabs.org
> cc: Wolfgang Denk <wd@denx.de>
> ---
> For this patchseries following patch is needed:
> 
> http://patchwork.ozlabs.org/patch/91919/
> 
> Grant? Do you have some comments on that patch?
> 
>  arch/powerpc/boot/dts/a4m072.dts             |  273 ++++++++++++++++++++++++++
>  arch/powerpc/platforms/52xx/mpc5200_simple.c |    1 +
>  2 files changed, 274 insertions(+), 0 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/a4m072.dts
> 
> diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts
> new file mode 100644
> index 0000000..cea1c6f
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/a4m072.dts
> @@ -0,0 +1,273 @@
> +/*
> + * a4m072 board Device Tree Source
> + *
> + * Copyright (C) 2011 DENX Software Engineering GmbH
> + * Heiko Schocher <hs@denx.de>
> + *
> + * Copyright (C) 2007 Semihalf
> + * Marian Balakowicz <m8@semihalf.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> +	model = "anonymous,a4m072";
> +	compatible = "anonymous,a4m072";

anonymous?  This bears some description.

Also, 5200b boards can use the mpc5200b.dtsi include file.  This one
should too.

> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	interrupt-parent = <&mpc5200_pic>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		PowerPC,5200@0 {
> +			device_type = "cpu";
> +			reg = <0>;
> +			d-cache-line-size = <32>;
> +			i-cache-line-size = <32>;
> +			d-cache-size = <0x4000>;	// L1, 16K
> +			i-cache-size = <0x4000>;	// L1, 16K
> +			timebase-frequency = <0>; /* From boot loader */
> +			bus-frequency = <0>; /* From boot loader */
> +			clock-frequency = <0>; /* From boot loader */
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x04000000>;
> +	};
> +
> +	soc5200@f0000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "fsl,mpc5200b-immr";
> +		ranges = <0 0xf0000000 0x0000c000>;
> +		reg = <0xf0000000 0x00000100>;
> +		bus-frequency = <0>; /* From boot loader */
> +		system-frequency = <0>; /* From boot loader */
> +
> +		cdm@200 {
> +			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
> +			reg = <0x200 0x38>;
> +			fsl,ext_48mhz_en = <0x0>;
> +			fsl,fd_enable = <0x01>;
> +			fsl,fd_counters = <0xbbbb>;
> +		};
> +
> +		mpc5200_pic: interrupt-controller@500 {
> +			// 5200 interrupts are encoded into two levels;
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
> +			reg = <0x500 0x80>;
> +		};
> +
> +		timer@600 {
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x600 0x80>;
> +			interrupts = <1 9 0>;
> +			fsl,has-wdt;
> +		};
> +
> +		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x630 0x10>;
> +			interrupts = <1 12 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x640 0x10>;
> +			interrupts = <1 13 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
> +			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
> +			reg = <0x650 0x10>;
> +			interrupts = <1 14 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		can@900 {
> +			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> +			interrupts = <2 17 0>;
> +			reg = <0x900 0x80>;
> +		};
> +
> +		can@980 {
> +			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
> +			interrupts = <2 18 0>;
> +			reg = <0x980 0x80>;
> +		};
> +
> +		gpio_simple: gpio@b00 {
> +			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
> +			reg = <0xb00 0x40>;
> +			interrupts = <1 7 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			fsl,port_config = <0x19051444>;
> +		};
> +
> +		gpio_wkup: gpio@c00 {
> +			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
> +			reg = <0xc00 0x40>;
> +			interrupts = <1 8 0 0 3 0>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		usb@1000 {
> +			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
> +			reg = <0x1000 0xff>;
> +			interrupts = <2 6 0>;
> +		};
> +
> +		dma-controller@1200 {
> +			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
> +			reg = <0x1200 0x80>;
> +			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> +			              3 4 0  3 5 0  3 6 0  3 7 0
> +			              3 8 0  3 9 0  3 10 0  3 11 0
> +			              3 12 0  3 13 0  3 14 0  3 15 0>;
> +		};
> +
> +		xlb@1f00 {
> +			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
> +			reg = <0x1f00 0x100>;
> +		};
> +
> +		psc@2000 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2000 0x100>;
> +			interrupts = <2 1 0>;
> +		};
> +
> +		psc@2200 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2200 0x100>;
> +			interrupts = <2 2 0>;
> +		};
> +
> +		psc@2400 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2400 0x100>;
> +			interrupts = <2 3 0>;
> +		};
> +
> +		psc@2c00 {
> +			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
> +			reg = <0x2c00 0x100>;
> +			interrupts = <2 4 0>;
> +		};
> +
> +		ethernet@3000 {
> +			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
> +			reg = <0x3000 0x400>;
> +			local-mac-address = [ 00 00 00 00 00 00 ];
> +			interrupts = <2 5 0>;
> +			phy-handle = <&phy0>;
> +		};
> +
> +		mdio@3000 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
> +			reg = <0x3000 0x400>;
> +			interrupts = <2 5 0>;
> +
> +			phy0: ethernet-phy@1f {
> +				reg = <0x1f>;
> +				interrupts = <1 2 0>; /* IRQ 2 active low */
> +			};
> +		};
> +
> +		ata@3a00 {
> +			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
> +			reg = <0x3a00 0x100>;
> +			interrupts = <2 7 0>;
> +		};
> +
> +		i2c@3d40 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
> +			reg = <0x3d40 0x40>;
> +			interrupts = <2 16 0>;
> +
> +			 hwmon@2e {
> +				compatible = "nsc,lm87";
> +				reg = <0x2e>;
> +			};
> +			 rtc@51 {
> +				compatible = "nxp,rtc8564";
> +				reg = <0x51>;
> +			};
> +		};
> +
> +		sram@8000 {
> +			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
> +			reg = <0x8000 0x4000>;
> +		};
> +	};
> +
> +	localbus {
> +		compatible = "fsl,mpc5200b-lpb","simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		ranges = <0 0 0xfe000000 0x02000000
> +			  1 0 0x62000000 0x00400000
> +			  2 0 0x64000000 0x00200000
> +			  3 0 0x66000000 0x01000000
> +			  6 0 0x68000000 0x01000000
> +			  7 0 0x6a000000 0x00000004
> +			 >;
> +
> +		flash@0,0 {
> +			compatible = "cfi-flash";
> +			reg = <0 0 0x02000000>;
> +			bank-width = <2>;
> +			#size-cells = <1>;
> +			#address-cells = <1>;
> +		};
> +		sram0@1,0 {
> +			compatible = "mtd-ram";
> +			reg = <1 0x00000 0x00400000>;
> +			bank-width = <2>;
> +		};
> +	};
> +
> +	pci@f0000d00 {
> +		#interrupt-cells = <1>;
> +		#size-cells = <2>;
> +		#address-cells = <3>;
> +		device_type = "pci";
> +		compatible = "fsl,mpc5200-pci";
> +		reg = <0xf0000d00 0x100>;
> +		interrupt-map-mask = <0xf800 0 0 7>;
> +		interrupt-map = <
> +				 /* IDSEL 0x16 */
> +				 0xc000 0 0 1 &mpc5200_pic 1 3 3
> +				 0xc000 0 0 2 &mpc5200_pic 1 3 3
> +				 0xc000 0 0 3 &mpc5200_pic 1 3 3
> +				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
> +		clock-frequency = <0>; /* From boot loader */
> +		interrupts = <2 8 0 2 9 0 2 10 0>;
> +		bus-range = <0 0>;
> +		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
> +			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
> +			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
> +	};
> +};
> diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> index e36d6e2..192b4ff 100644
> --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
> +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
> @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void)
>  
>  /* list of the supported boards */
>  static const char *board[] __initdata = {
> +	"anonymous,a4m072",
>  	"intercontrol,digsy-mtc",
>  	"manroland,mucmc52",
>  	"manroland,uc101",
> -- 
> 1.7.5.4
> 

[PATCH 3/4] powerpc, mpc5200: update mpc5200_defconfig

[Heiko Schocher]

just made a

make mpc5200_defconfig
make savedefconfig
cp defconfig arch/powerpc/configs/mpc5200_defconfig

So changes needed in mpc5200_defconfig for a4m072 board support
better indicated.

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
---
 arch/powerpc/configs/mpc5200_defconfig |    9 +--------
 1 files changed, 1 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index e63f537..b3e27f6 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -1,8 +1,8 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -20,8 +20,6 @@ CONFIG_PPC_BESTCOMM=y
 CONFIG_SIMPLE_GPIO=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -36,10 +34,7 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
@@ -115,7 +110,6 @@ CONFIG_RTC_DRV_DS1307=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -133,5 +127,4 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.5.4

[PATCH 4/4] powerpc, mpc5200: add options to mpc5200_defconfig

[Heiko Schocher]

Add the following options to the mpc5200_defconfig, needed
for the a4m072 board support:

CONFIG_AMD_PHY=y
CONFIG_MTD_PLATRAM=y -> this deletes CONFIG_MTD_RAM=y
CONFIG_GPIO_SYSFS=y
CONFIG_SENSORS_LM87=m
CONFIG_RTC_DRV_PCF8563=m

Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
---
 arch/powerpc/configs/mpc5200_defconfig |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig
index b3e27f6..1e64591 100644
--- a/arch/powerpc/configs/mpc5200_defconfig
+++ b/arch/powerpc/configs/mpc5200_defconfig
@@ -39,9 +39,9 @@ CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_RAM=y
 CONFIG_MTD_ROM=y
 CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_PLATRAM=y
 CONFIG_MTD_UBI=m
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
@@ -56,6 +56,7 @@ CONFIG_ATA=y
 CONFIG_PATA_MPC52xx=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
+CONFIG_AMD_PHY=y
 CONFIG_LXT_PHY=y
 CONFIG_NET_ETHERNET=y
 CONFIG_FEC_MPC52xx=y
@@ -75,6 +76,8 @@ CONFIG_SPI_GPIO=m
 CONFIG_SPI_MPC52xx=m
 CONFIG_SPI_MPC52xx_PSC=m
 CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_SENSORS_LM87=m
 CONFIG_WATCHDOG=y
 CONFIG_DRM=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
@@ -107,6 +110,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-- 
1.7.5.4

Re: [PATCH 4/4] powerpc, mpc5200: add options to mpc5200_defconfig

[Anatolij Gustschin]

On Wed, 22 Jun 2011 09:55:11 +0200
Heiko Schocher <hs@denx.de> wrote:

> Add the following options to the mpc5200_defconfig, needed
> for the a4m072 board support:
> 
> CONFIG_AMD_PHY=y
> CONFIG_MTD_PLATRAM=y -> this deletes CONFIG_MTD_RAM=y
> CONFIG_GPIO_SYSFS=y
> CONFIG_SENSORS_LM87=m
> CONFIG_RTC_DRV_PCF8563=m
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> cc: Wolfgang Denk <wd@denx.de>
> ---
>  arch/powerpc/configs/mpc5200_defconfig |    6 +++++-
>  1 files changed, 5 insertions(+), 1 deletions(-)

I squashed both patches (3/4, 4/4) to a single patch when re-basing
and applying.

Thanks,
Anatolij