From: Martin Jansa <martin.jansa@gmail.com>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 1/3] Add ARM tune file overhaul based largely on work from Mark Hatle
Date: Thu, 28 Jul 2011 20:17:30 +0200 [thread overview]
Message-ID: <20110728181730.GJ15286@jama.jama.net> (raw)
In-Reply-To: <1311843248.30326.403.camel@phil-desktop>
[-- Attachment #1: Type: text/plain, Size: 809 bytes --]
On Thu, Jul 28, 2011 at 09:54:06AM +0100, Phil Blundell wrote:
> On Thu, 2011-07-28 at 09:24 +0200, Martin Jansa wrote:
> > Mark is right that if we have PACKAGE_ARCH = "armv4t" and we force
> > no-thumb with ARM_INSTRUCTION_SET = "arm" then PACKAGE_ARCH should be
> > switched to "armv4" only to indicate that.
>
> No, this is wrong. Even with ARM_INSTRUCTION_SET = "arm" you might have
> BX instructions in the output, in which case "armv4t" is the correct
> PACKAGE_ARCH. You can only set PACKAGE_ARCH = "armv4" if all the BXs
> have been suppressed, which means that you lose the ability to do
> interworking.
Ah right, we cannot allow this to be in ie collie feed. So old behavior
was correct in this aspect too.
Thanks
--
Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
next prev parent reply other threads:[~2011-07-28 18:21 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1311683981.git.richard.purdie@linuxfoundation.org>
2011-07-26 12:44 ` [PATCH 1/3] Add ARM tune file overhaul based largely on work from Mark Hatle Richard Purdie
2011-07-26 12:46 ` Koen Kooi
2011-07-27 12:17 ` Phil Blundell
2011-07-27 13:33 ` Richard Purdie
2011-07-27 14:27 ` Mark Hatle
2011-07-27 14:33 ` Koen Kooi
2011-07-27 14:49 ` Mark Hatle
2011-07-27 14:57 ` Phil Blundell
2011-07-27 15:01 ` Koen Kooi
2011-07-27 15:08 ` Phil Blundell
2011-07-27 15:13 ` Koen Kooi
2011-07-27 15:17 ` Phil Blundell
2011-07-29 6:31 ` Khem Raj
2011-07-29 6:20 ` Khem Raj
2011-07-27 14:34 ` Richard Purdie
2011-07-27 14:44 ` Phil Blundell
2011-07-27 14:55 ` Mark Hatle
2011-07-29 6:18 ` Khem Raj
2011-07-29 7:15 ` Phil Blundell
2011-07-29 6:08 ` Khem Raj
2011-07-29 6:47 ` Phil Blundell
2011-07-29 6:51 ` Khem Raj
2011-07-27 14:34 ` Phil Blundell
2011-07-27 14:58 ` Mark Hatle
2011-07-27 15:25 ` Phil Blundell
2011-07-27 15:29 ` Richard Purdie
2011-07-27 15:49 ` Phil Blundell
2011-07-27 17:19 ` Mark Hatle
2011-07-27 19:31 ` Phil Blundell
2011-07-27 20:48 ` Mark Hatle
2011-07-27 21:16 ` Phil Blundell
2011-07-28 0:43 ` Khem Raj
2011-07-28 7:24 ` Martin Jansa
2011-07-28 8:54 ` Phil Blundell
2011-07-28 18:17 ` Martin Jansa [this message]
2011-07-29 6:41 ` Khem Raj
2011-07-29 6:38 ` Khem Raj
2011-07-29 7:13 ` Phil Blundell
2011-07-29 6:27 ` Khem Raj
2011-07-27 17:31 ` do_rootfs broken, was: " Koen Kooi
2011-07-27 18:19 ` Koen Kooi
2011-07-28 11:39 ` Phil Blundell
2011-07-29 5:59 ` Khem Raj
2011-07-29 7:25 ` Phil Blundell
2011-07-29 8:22 ` Koen Kooi
2011-07-26 12:44 ` [PATCH 2/3] Add basic Mips core tune config Richard Purdie
2011-07-26 14:41 ` Mark Hatle
2011-07-26 16:51 ` Richard Purdie
2011-07-26 17:08 ` Mark Hatle
2011-07-26 19:47 ` Khem Raj
2011-08-11 11:25 ` Phil Blundell
2011-08-11 12:08 ` Richard Purdie
2011-08-11 12:29 ` Phil Blundell
2011-08-11 14:28 ` Richard Purdie
2011-08-11 14:49 ` Khem Raj
2011-08-12 14:35 ` Phil Blundell
2011-08-12 15:28 ` Khem Raj
2011-08-11 15:54 ` Mark Hatle
2011-07-26 12:44 ` [PATCH 3/3] Add basic PowerPC " Richard Purdie
2011-07-26 13:47 ` Kumar Gala
2011-07-26 13:59 ` Richard Purdie
2011-07-26 14:59 ` Mark Hatle
2011-07-26 15:22 ` Kumar Gala
2011-07-26 16:18 ` Richard Purdie
2011-07-26 21:56 ` Kumar Gala
2011-07-26 22:02 ` Kumar Gala
2011-07-26 22:29 ` Khem Raj
2011-07-26 22:52 ` Richard Purdie
2011-07-27 3:23 ` Kumar Gala
2011-07-27 8:36 ` Richard Purdie
2011-07-27 8:44 ` Koen Kooi
2011-07-27 9:30 ` Richard Purdie
2011-07-28 5:25 ` Add basic PowerPC core tune config (bug?) Kumar Gala
2011-07-28 6:09 ` Saul Wold
2011-07-28 7:48 ` Cui, Dexuan
2011-07-28 8:47 ` Paul Eggleton
2011-07-28 8:57 ` Koen Kooi
2011-07-28 9:20 ` Phil Blundell
2011-07-28 10:00 ` Koen Kooi
2011-07-28 10:03 ` Phil Blundell
2011-07-27 9:35 ` [PATCH 3/3] Add basic PowerPC core tune config Phil Blundell
2011-07-26 22:03 ` Kumar Gala
2011-07-27 8:31 ` Richard Purdie
2011-07-26 20:03 ` Khem Raj
2011-07-26 14:57 ` Mark Hatle
2011-07-26 16:36 ` Richard Purdie
2011-07-26 16:53 ` Mark Hatle
2011-07-26 17:05 ` Richard Purdie
2011-07-26 17:15 ` Mark Hatle
2011-07-26 19:21 ` Richard Purdie
2011-07-26 20:28 ` Richard Purdie
2011-07-26 20:13 ` Khem Raj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110728181730.GJ15286@jama.jama.net \
--to=martin.jansa@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.