From: Koen Kooi <koen@dominion.thruhere.net>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH 1/3] Add ARM tune file overhaul based largely on work from Mark Hatle
Date: Wed, 27 Jul 2011 17:01:14 +0200 [thread overview]
Message-ID: <332008BD-527C-4D2C-9C39-848D4CB3E74A@dominion.thruhere.net> (raw)
In-Reply-To: <1311778665.30326.359.camel@phil-desktop>
Op 27 jul. 2011, om 16:57 heeft Phil Blundell het volgende geschreven:
> On Wed, 2011-07-27 at 09:49 -0500, Mark Hatle wrote:
>> On 7/27/11 9:33 AM, Koen Kooi wrote:
>>> As I understand it:
>>>
>>> arm1136 doesn't have t2
>>> arm1176 does have t2
>>>
>>> both are armv6 :)
>>
>> They also don't have "thumb" support either. So armv6 & thumb == t2.
>
> No, that's incorrect. Both ARM1136 and ARM1176 do have Thumb-1 and, as
> I wrote in my last mail, I can't think of any plausible target processor
> for OE that has both ARMv6 and Thumb-2. So, for all current intents and
> purposes, (armv6 && thumb) == thumb-1.
the s3c6410 is arm1176 which should support T2. Having said that, I'm not sure if that actually works since T2 was broken in silicon for early cortex a8 revisions.
next prev parent reply other threads:[~2011-07-27 15:05 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1311683981.git.richard.purdie@linuxfoundation.org>
2011-07-26 12:44 ` [PATCH 1/3] Add ARM tune file overhaul based largely on work from Mark Hatle Richard Purdie
2011-07-26 12:46 ` Koen Kooi
2011-07-27 12:17 ` Phil Blundell
2011-07-27 13:33 ` Richard Purdie
2011-07-27 14:27 ` Mark Hatle
2011-07-27 14:33 ` Koen Kooi
2011-07-27 14:49 ` Mark Hatle
2011-07-27 14:57 ` Phil Blundell
2011-07-27 15:01 ` Koen Kooi [this message]
2011-07-27 15:08 ` Phil Blundell
2011-07-27 15:13 ` Koen Kooi
2011-07-27 15:17 ` Phil Blundell
2011-07-29 6:31 ` Khem Raj
2011-07-29 6:20 ` Khem Raj
2011-07-27 14:34 ` Richard Purdie
2011-07-27 14:44 ` Phil Blundell
2011-07-27 14:55 ` Mark Hatle
2011-07-29 6:18 ` Khem Raj
2011-07-29 7:15 ` Phil Blundell
2011-07-29 6:08 ` Khem Raj
2011-07-29 6:47 ` Phil Blundell
2011-07-29 6:51 ` Khem Raj
2011-07-27 14:34 ` Phil Blundell
2011-07-27 14:58 ` Mark Hatle
2011-07-27 15:25 ` Phil Blundell
2011-07-27 15:29 ` Richard Purdie
2011-07-27 15:49 ` Phil Blundell
2011-07-27 17:19 ` Mark Hatle
2011-07-27 19:31 ` Phil Blundell
2011-07-27 20:48 ` Mark Hatle
2011-07-27 21:16 ` Phil Blundell
2011-07-28 0:43 ` Khem Raj
2011-07-28 7:24 ` Martin Jansa
2011-07-28 8:54 ` Phil Blundell
2011-07-28 18:17 ` Martin Jansa
2011-07-29 6:41 ` Khem Raj
2011-07-29 6:38 ` Khem Raj
2011-07-29 7:13 ` Phil Blundell
2011-07-29 6:27 ` Khem Raj
2011-07-27 17:31 ` do_rootfs broken, was: " Koen Kooi
2011-07-27 18:19 ` Koen Kooi
2011-07-28 11:39 ` Phil Blundell
2011-07-29 5:59 ` Khem Raj
2011-07-29 7:25 ` Phil Blundell
2011-07-29 8:22 ` Koen Kooi
2011-07-26 12:44 ` [PATCH 2/3] Add basic Mips core tune config Richard Purdie
2011-07-26 14:41 ` Mark Hatle
2011-07-26 16:51 ` Richard Purdie
2011-07-26 17:08 ` Mark Hatle
2011-07-26 19:47 ` Khem Raj
2011-08-11 11:25 ` Phil Blundell
2011-08-11 12:08 ` Richard Purdie
2011-08-11 12:29 ` Phil Blundell
2011-08-11 14:28 ` Richard Purdie
2011-08-11 14:49 ` Khem Raj
2011-08-12 14:35 ` Phil Blundell
2011-08-12 15:28 ` Khem Raj
2011-08-11 15:54 ` Mark Hatle
2011-07-26 12:44 ` [PATCH 3/3] Add basic PowerPC " Richard Purdie
2011-07-26 13:47 ` Kumar Gala
2011-07-26 13:59 ` Richard Purdie
2011-07-26 14:59 ` Mark Hatle
2011-07-26 15:22 ` Kumar Gala
2011-07-26 16:18 ` Richard Purdie
2011-07-26 21:56 ` Kumar Gala
2011-07-26 22:02 ` Kumar Gala
2011-07-26 22:29 ` Khem Raj
2011-07-26 22:52 ` Richard Purdie
2011-07-27 3:23 ` Kumar Gala
2011-07-27 8:36 ` Richard Purdie
2011-07-27 8:44 ` Koen Kooi
2011-07-27 9:30 ` Richard Purdie
2011-07-28 5:25 ` Add basic PowerPC core tune config (bug?) Kumar Gala
2011-07-28 6:09 ` Saul Wold
2011-07-28 7:48 ` Cui, Dexuan
2011-07-28 8:47 ` Paul Eggleton
2011-07-28 8:57 ` Koen Kooi
2011-07-28 9:20 ` Phil Blundell
2011-07-28 10:00 ` Koen Kooi
2011-07-28 10:03 ` Phil Blundell
2011-07-27 9:35 ` [PATCH 3/3] Add basic PowerPC core tune config Phil Blundell
2011-07-26 22:03 ` Kumar Gala
2011-07-27 8:31 ` Richard Purdie
2011-07-26 20:03 ` Khem Raj
2011-07-26 14:57 ` Mark Hatle
2011-07-26 16:36 ` Richard Purdie
2011-07-26 16:53 ` Mark Hatle
2011-07-26 17:05 ` Richard Purdie
2011-07-26 17:15 ` Mark Hatle
2011-07-26 19:21 ` Richard Purdie
2011-07-26 20:28 ` Richard Purdie
2011-07-26 20:13 ` Khem Raj
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=332008BD-527C-4D2C-9C39-848D4CB3E74A@dominion.thruhere.net \
--to=koen@dominion.thruhere.net \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.