* [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
@ 2011-09-23 16:03 ` Marc Zyngier
0 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel
The current GIC per-cpu interrupts (aka PPIs) suffer from a number of
problems:
- They use a completely separate scheme to handle the interrupts,
mostly because the PPI concept doesn't really match the kernel view
of an interrupt.
- PPIs can only be used by the timer code, unless we add more low-level
assembly code.
- The local timer code can only be used by devices generating PPIs,
and not SPIs.
- At least one platform (msm) has started implementing its own
alternative scheme.
- Some low-level code gets duplicated, as usual...
The proposed solution is to handle the PPIs using the same path as
SPIs. A new core API is added to deal with per-cpu interrupts in a
less awkward way. The local timer code is updated to reflect these
changes.
The core API changes are based on an initial idea by Thomas Gleixner.
Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts
2011-09-23 16:03 ` Marc Zyngier
@ 2011-09-23 16:03 ` Marc Zyngier
-1 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel; +Cc: Thomas Gleixner
The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
which are usually used to connect local timers to each core.
Each CPU has its own private interface to the GIC,
and only sees the PPIs that are directly connect to it.
While these timers are separate devices and have a separate
interrupt line to a core, they all use the same IRQ number.
For these devices, request_irq() is not the right API as it
assumes that an IRQ number is visible by a number of CPUs
(through the affinity setting), but makes it very awkward to
express that an IRQ number can be handled by all CPUs, and
yet be a different interrupt line on each CPU, requiring a
different dev_id cookie to be passed back to the handler.
The *_percpu_irq() functions is designed to overcome these
limitations, by providing a per-cpu dev_id vector:
int request_percpu_irq(unsigned int irq, irq_handler_t handler,
const char *devname, void __percpu *percpu_dev_id);
void free_percpu_irq(unsigned int, void __percpu *);
int setup_percpu_irq(unsigned int irq, struct irqaction *new);
void remove_percpu_irq(unsigned int irq, struct irqaction *act);
void enable_percpu_irq(unsigned int irq);
void disable_percpu_irq(unsigned int irq);
The API has a number of limitations:
- no interrupt sharing
- no threading
- common handler across all the CPUs
Once the interrupt is requested using setup_percpu_irq() or
request_percpu_irq(), it must be enabled by each core that wishes
its local interrupt to be delivered.
Based on an initial patch by Thomas Gleixner.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/linux/interrupt.h | 40 +++++++---
include/linux/irq.h | 16 ++++-
include/linux/irqdesc.h | 1 +
kernel/irq/Kconfig | 4 +
kernel/irq/chip.c | 54 ++++++++++++
kernel/irq/internals.h | 2 +
kernel/irq/irqdesc.c | 25 ++++++
kernel/irq/manage.c | 206 ++++++++++++++++++++++++++++++++++++++++++++-
kernel/irq/settings.h | 7 ++
9 files changed, 339 insertions(+), 16 deletions(-)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index a103732..85d07ce 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -95,6 +95,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
* @flags: flags (see IRQF_* above)
* @name: name of the device
* @dev_id: cookie to identify the device
+ * @percpu_dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
* @irq: interrupt number
* @dir: pointer to the proc/irq/NN/name entry
@@ -104,17 +105,20 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
* @thread_mask: bitmask for keeping track of @thread activity
*/
struct irqaction {
- irq_handler_t handler;
- unsigned long flags;
- void *dev_id;
- struct irqaction *next;
- int irq;
- irq_handler_t thread_fn;
- struct task_struct *thread;
- unsigned long thread_flags;
- unsigned long thread_mask;
- const char *name;
- struct proc_dir_entry *dir;
+ irq_handler_t handler;
+ unsigned long flags;
+ void *dev_id;
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+ void __percpu *percpu_dev_id;
+#endif
+ struct irqaction *next;
+ int irq;
+ irq_handler_t thread_fn;
+ struct task_struct *thread;
+ unsigned long thread_flags;
+ unsigned long thread_mask;
+ const char *name;
+ struct proc_dir_entry *dir;
} ____cacheline_internodealigned_in_smp;
extern irqreturn_t no_action(int cpl, void *dev_id);
@@ -136,6 +140,10 @@ extern int __must_check
request_any_context_irq(unsigned int irq, irq_handler_t handler,
unsigned long flags, const char *name, void *dev_id);
+extern int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id);
+
extern void exit_irq_thread(void);
#else
@@ -164,10 +172,18 @@ request_any_context_irq(unsigned int irq, irq_handler_t handler,
return request_irq(irq, handler, flags, name, dev_id);
}
+static inline int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id)
+{
+ return request_irq(irq, handler, 0, devname, percpu_dev_id);
+}
+
static inline void exit_irq_thread(void) { }
#endif
extern void free_irq(unsigned int, void *);
+extern void free_percpu_irq(unsigned int, void __percpu *);
struct device;
@@ -207,7 +223,9 @@ extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
extern void disable_irq_nosync(unsigned int irq);
extern void disable_irq(unsigned int irq);
+extern void disable_percpu_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
+extern void enable_percpu_irq(unsigned int irq);
/* The following three functions are for the core kernel use only. */
#ifdef CONFIG_GENERIC_HARDIRQS
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 73e31ab..59e49c8 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -66,6 +66,7 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data);
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
* IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context
* IRQ_NESTED_TRHEAD - Interrupt nests into another thread
+ * IRQ_PER_CPU_DEVID - Dev_id is a per-cpu variable
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
@@ -88,12 +89,13 @@ enum {
IRQ_MOVE_PCNTXT = (1 << 14),
IRQ_NESTED_THREAD = (1 << 15),
IRQ_NOTHREAD = (1 << 16),
+ IRQ_PER_CPU_DEVID = (1 << 17),
};
#define IRQF_MODIFY_MASK \
(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
- IRQ_PER_CPU | IRQ_NESTED_THREAD)
+ IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID)
#define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING)
@@ -367,6 +369,8 @@ enum {
struct irqaction;
extern int setup_irq(unsigned int irq, struct irqaction *new);
extern void remove_irq(unsigned int irq, struct irqaction *act);
+extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
+extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
extern void irq_cpu_online(void);
extern void irq_cpu_offline(void);
@@ -394,6 +398,7 @@ extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_nested_irq(unsigned int irq);
@@ -422,6 +427,8 @@ static inline void irq_set_chip_and_handler(unsigned int irq, struct irq_chip *c
irq_set_chip_and_handler_name(irq, chip, handle, NULL);
}
+extern int irq_set_percpu_devid(unsigned int irq);
+
extern void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name);
@@ -483,6 +490,13 @@ static inline void irq_set_nested_thread(unsigned int irq, bool nest)
irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
}
+static inline void irq_set_percpu_devid_flags(unsigned int irq)
+{
+ irq_set_status_flags(irq,
+ IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
+ IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
+}
+
/* Handle dynamic irq creation and destruction */
extern unsigned int create_irq_nr(unsigned int irq_want, int node);
extern int create_irq(void);
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 150134a..281ccd1 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -53,6 +53,7 @@ struct irq_desc {
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
raw_spinlock_t lock;
+ cpumask_var_t *percpu_enabled;
#ifdef CONFIG_SMP
const struct cpumask *affinity_hint;
struct irq_affinity_notify *affinity_notify;
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 5a38bf4..75c0631 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -60,6 +60,10 @@ config IRQ_DOMAIN
config IRQ_FORCED_THREADING
bool
+# Support per CPU dev id
+config IRQ_PERCPU_DEVID
+ bool
+
config SPARSE_IRQ
bool "Support sparse irq numbering"
depends on HAVE_SPARSE_IRQ
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index dc5114b..38942d8 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -204,6 +204,26 @@ void irq_disable(struct irq_desc *desc)
}
}
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_enable)
+ desc->irq_data.chip->irq_enable(&desc->irq_data);
+ else
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ cpumask_set_cpu(cpu, *desc->percpu_enabled);
+}
+
+void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_disable) {
+ desc->irq_data.chip->irq_disable(&desc->irq_data);
+ irq_state_set_masked(desc);
+ }
+ cpumask_clear_cpu(cpu, *desc->percpu_enabled);
+}
+#endif
+
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack)
@@ -544,6 +564,40 @@ handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
chip->irq_eoi(&desc->irq_data);
}
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+/**
+ * handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
+ * @irq: the interrupt number
+ * @desc: the interrupt description structure for this irq
+ *
+ * Per CPU interrupts on SMP machines without locking requirements. Same as
+ * handle_percpu_irq() above but with the following extras:
+ *
+ * action->percpu_dev_id is a pointer to percpu variables which
+ * contain the real device id for the cpu on which this handler is
+ * called
+ */
+void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irqaction *action = desc->action;
+ void *dev_id = __this_cpu_ptr(action->percpu_dev_id);
+ irqreturn_t res;
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ trace_irq_handler_entry(irq, action);
+ res = action->handler(irq, dev_id);
+ trace_irq_handler_exit(irq, action, res);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+#endif
+
void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 6546431..04f8d5a 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -71,6 +71,8 @@ extern int irq_startup(struct irq_desc *desc);
extern void irq_shutdown(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
+extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
+extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
extern void mask_irq(struct irq_desc *desc);
extern void unmask_irq(struct irq_desc *desc);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 039b889..fa93f4d 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -443,6 +443,31 @@ void __irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags, bool bus)
chip_bus_sync_unlock(desc);
}
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+int irq_set_percpu_devid(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return -EINVAL;
+
+ if (desc->percpu_enabled)
+ return -EINVAL;
+
+ desc->percpu_enabled = kzalloc(sizeof(*desc->percpu_enabled), GFP_KERNEL);
+
+ if (!desc->percpu_enabled ||
+ !zalloc_cpumask_var(desc->percpu_enabled, GFP_KERNEL)) {
+ kfree(desc->percpu_enabled);
+ desc->percpu_enabled = NULL;
+ return -ENOMEM;
+ }
+
+ irq_set_percpu_devid_flags(irq);
+ return 0;
+}
+#endif
+
/**
* dynamic_irq_cleanup - cleanup a dynamically allocated irq
* @irq: irq number to initialize
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 7e1a3ed..2e05d92 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1121,6 +1121,8 @@ int setup_irq(unsigned int irq, struct irqaction *act)
int retval;
struct irq_desc *desc = irq_to_desc(irq);
+ if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ return -EINVAL;
chip_bus_lock(desc);
retval = __setup_irq(irq, desc, act);
chip_bus_sync_unlock(desc);
@@ -1129,7 +1131,7 @@ int setup_irq(unsigned int irq, struct irqaction *act)
}
EXPORT_SYMBOL_GPL(setup_irq);
- /*
+/*
* Internal function to unregister an irqaction - used to free
* regular and special interrupts that are part of the architecture.
*/
@@ -1227,7 +1229,10 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
*/
void remove_irq(unsigned int irq, struct irqaction *act)
{
- __free_irq(irq, act->dev_id);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ __free_irq(irq, act->dev_id);
}
EXPORT_SYMBOL_GPL(remove_irq);
@@ -1249,7 +1254,7 @@ void free_irq(unsigned int irq, void *dev_id)
{
struct irq_desc *desc = irq_to_desc(irq);
- if (!desc)
+ if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return;
#ifdef CONFIG_SMP
@@ -1327,7 +1332,8 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
if (!desc)
return -EINVAL;
- if (!irq_settings_can_request(desc))
+ if (!irq_settings_can_request(desc) ||
+ WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return -EINVAL;
if (!handler) {
@@ -1412,3 +1418,195 @@ int request_any_context_irq(unsigned int irq, irq_handler_t handler,
return !ret ? IRQC_IS_HARDIRQ : ret;
}
EXPORT_SYMBOL_GPL(request_any_context_irq);
+
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+void enable_percpu_irq(unsigned int irq)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+
+ if (!desc)
+ return;
+
+ irq_percpu_enable(desc, cpu);
+ irq_put_desc_busunlock(desc, flags);
+}
+EXPORT_SYMBOL_GPL(enable_percpu_irq);
+
+void disable_percpu_irq(unsigned int irq)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+
+ if (!desc)
+ return;
+
+ irq_percpu_disable(desc, cpu);
+ irq_put_desc_busunlock(desc, flags);
+}
+EXPORT_SYMBOL_GPL(disable_percpu_irq);
+
+/*
+ * Internal function to unregister a percpu irqaction.
+ */
+static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ unsigned long flags;
+
+ WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
+
+ if (!desc)
+ return NULL;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+
+ action = desc->action;
+ if (!action || action->percpu_dev_id != dev_id) {
+ WARN(1, "Trying to free already-free IRQ %d\n", irq);
+ goto bad;
+ }
+
+ if (!cpumask_empty(*desc->percpu_enabled)) {
+ WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
+ irq, cpumask_first(*desc->percpu_enabled));
+ goto bad;
+ }
+
+ /* Found it - now remove it from the list of entries: */
+ desc->action = NULL;
+
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+
+ unregister_handler_proc(irq, action);
+
+ module_put(desc->owner);
+ return action;
+
+bad:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ return NULL;
+}
+
+/**
+ * remove_percpu_irq - free a per-cpu interrupt
+ * @irq: Interrupt line to free
+ * @act: irqaction for the interrupt
+ *
+ * Used to remove interrupts statically setup by the early boot process.
+ */
+void remove_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && irq_settings_is_per_cpu_devid(desc))
+ __free_percpu_irq(irq, act->percpu_dev_id);
+}
+EXPORT_SYMBOL_GPL(remove_percpu_irq);
+
+/**
+ * free_percpu_irq - free an interrupt allocated with request_percpu_irq
+ * @irq: Interrupt line to free
+ * @dev_id: Device identity to free
+ *
+ * Remove a percpu interrupt handler. The handler is removed, but
+ * the interrupt line is not disabled. This must be done on each
+ * CPU before calling this function. The function does not return
+ * until any executing interrupts for this IRQ have completed.
+ *
+ * This function must not be called from interrupt context.
+ */
+void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc || !irq_settings_is_per_cpu_devid(desc))
+ return;
+
+#ifdef CONFIG_SMP
+ if (WARN_ON(desc->affinity_notify))
+ desc->affinity_notify = NULL;
+#endif
+
+ chip_bus_lock(desc);
+ kfree(__free_percpu_irq(irq, dev_id));
+ chip_bus_sync_unlock(desc);
+}
+EXPORT_SYMBOL_GPL(free_percpu_irq);
+
+/**
+ * setup_percpu_irq - setup a per-cpu interrupt
+ * @irq: Interrupt line to setup
+ * @act: irqaction for the interrupt
+ *
+ * Used to statically setup per-cpu interrupts in the early boot process.
+ */
+int setup_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ int retval;
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, act);
+ chip_bus_sync_unlock(desc);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(setup_percpu_irq);
+
+/**
+ * request_percpu_irq - allocate a percpu interrupt line
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs.
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A percpu cookie passed back to the handler function
+ *
+ * This call allocates interrupt resources, but doesn't
+ * automatically enable the interrupt. It has to be done on each
+ * CPU using enable_percpu_irq().
+ *
+ * Dev_id must be globally unique. It is a per-cpu variable, and
+ * the handler gets called with the interrupted CPU's instance of
+ * that variable.
+ */
+int request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *dev_id)
+{
+ struct irqaction *action;
+ struct irq_desc *desc;
+ int retval;
+
+ if (!dev_id)
+ return -EINVAL;
+
+ desc = irq_to_desc(irq);
+ if (!desc || !irq_settings_can_request(desc) ||
+ !irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+
+ action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
+ if (!action)
+ return -ENOMEM;
+
+ action->handler = handler;
+ action->flags = IRQF_PERCPU;
+ action->name = devname;
+ action->percpu_dev_id = dev_id;
+
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, action);
+ chip_bus_sync_unlock(desc);
+
+ if (retval)
+ kfree(action);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(request_percpu_irq);
+
+#endif
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index f166783..1162f10 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -13,6 +13,7 @@ enum {
_IRQ_MOVE_PCNTXT = IRQ_MOVE_PCNTXT,
_IRQ_NO_BALANCING = IRQ_NO_BALANCING,
_IRQ_NESTED_THREAD = IRQ_NESTED_THREAD,
+ _IRQ_PER_CPU_DEVID = IRQ_PER_CPU_DEVID,
_IRQF_MODIFY_MASK = IRQF_MODIFY_MASK,
};
@@ -24,6 +25,7 @@ enum {
#define IRQ_NOTHREAD GOT_YOU_MORON
#define IRQ_NOAUTOEN GOT_YOU_MORON
#define IRQ_NESTED_THREAD GOT_YOU_MORON
+#define IRQ_PER_CPU_DEVID GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
#define IRQF_MODIFY_MASK GOT_YOU_MORON
@@ -39,6 +41,11 @@ static inline bool irq_settings_is_per_cpu(struct irq_desc *desc)
return desc->status_use_accessors & _IRQ_PER_CPU;
}
+static inline bool irq_settings_is_per_cpu_devid(struct irq_desc *desc)
+{
+ return desc->status_use_accessors & _IRQ_PER_CPU_DEVID;
+}
+
static inline void irq_settings_set_per_cpu(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_PER_CPU;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts
@ 2011-09-23 16:03 ` Marc Zyngier
0 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel
The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
which are usually used to connect local timers to each core.
Each CPU has its own private interface to the GIC,
and only sees the PPIs that are directly connect to it.
While these timers are separate devices and have a separate
interrupt line to a core, they all use the same IRQ number.
For these devices, request_irq() is not the right API as it
assumes that an IRQ number is visible by a number of CPUs
(through the affinity setting), but makes it very awkward to
express that an IRQ number can be handled by all CPUs, and
yet be a different interrupt line on each CPU, requiring a
different dev_id cookie to be passed back to the handler.
The *_percpu_irq() functions is designed to overcome these
limitations, by providing a per-cpu dev_id vector:
int request_percpu_irq(unsigned int irq, irq_handler_t handler,
const char *devname, void __percpu *percpu_dev_id);
void free_percpu_irq(unsigned int, void __percpu *);
int setup_percpu_irq(unsigned int irq, struct irqaction *new);
void remove_percpu_irq(unsigned int irq, struct irqaction *act);
void enable_percpu_irq(unsigned int irq);
void disable_percpu_irq(unsigned int irq);
The API has a number of limitations:
- no interrupt sharing
- no threading
- common handler across all the CPUs
Once the interrupt is requested using setup_percpu_irq() or
request_percpu_irq(), it must be enabled by each core that wishes
its local interrupt to be delivered.
Based on an initial patch by Thomas Gleixner.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/linux/interrupt.h | 40 +++++++---
include/linux/irq.h | 16 ++++-
include/linux/irqdesc.h | 1 +
kernel/irq/Kconfig | 4 +
kernel/irq/chip.c | 54 ++++++++++++
kernel/irq/internals.h | 2 +
kernel/irq/irqdesc.c | 25 ++++++
kernel/irq/manage.c | 206 ++++++++++++++++++++++++++++++++++++++++++++-
kernel/irq/settings.h | 7 ++
9 files changed, 339 insertions(+), 16 deletions(-)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index a103732..85d07ce 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -95,6 +95,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
* @flags: flags (see IRQF_* above)
* @name: name of the device
* @dev_id: cookie to identify the device
+ * @percpu_dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
* @irq: interrupt number
* @dir: pointer to the proc/irq/NN/name entry
@@ -104,17 +105,20 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
* @thread_mask: bitmask for keeping track of @thread activity
*/
struct irqaction {
- irq_handler_t handler;
- unsigned long flags;
- void *dev_id;
- struct irqaction *next;
- int irq;
- irq_handler_t thread_fn;
- struct task_struct *thread;
- unsigned long thread_flags;
- unsigned long thread_mask;
- const char *name;
- struct proc_dir_entry *dir;
+ irq_handler_t handler;
+ unsigned long flags;
+ void *dev_id;
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+ void __percpu *percpu_dev_id;
+#endif
+ struct irqaction *next;
+ int irq;
+ irq_handler_t thread_fn;
+ struct task_struct *thread;
+ unsigned long thread_flags;
+ unsigned long thread_mask;
+ const char *name;
+ struct proc_dir_entry *dir;
} ____cacheline_internodealigned_in_smp;
extern irqreturn_t no_action(int cpl, void *dev_id);
@@ -136,6 +140,10 @@ extern int __must_check
request_any_context_irq(unsigned int irq, irq_handler_t handler,
unsigned long flags, const char *name, void *dev_id);
+extern int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id);
+
extern void exit_irq_thread(void);
#else
@@ -164,10 +172,18 @@ request_any_context_irq(unsigned int irq, irq_handler_t handler,
return request_irq(irq, handler, flags, name, dev_id);
}
+static inline int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id)
+{
+ return request_irq(irq, handler, 0, devname, percpu_dev_id);
+}
+
static inline void exit_irq_thread(void) { }
#endif
extern void free_irq(unsigned int, void *);
+extern void free_percpu_irq(unsigned int, void __percpu *);
struct device;
@@ -207,7 +223,9 @@ extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
extern void disable_irq_nosync(unsigned int irq);
extern void disable_irq(unsigned int irq);
+extern void disable_percpu_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
+extern void enable_percpu_irq(unsigned int irq);
/* The following three functions are for the core kernel use only. */
#ifdef CONFIG_GENERIC_HARDIRQS
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 73e31ab..59e49c8 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -66,6 +66,7 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data);
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
* IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context
* IRQ_NESTED_TRHEAD - Interrupt nests into another thread
+ * IRQ_PER_CPU_DEVID - Dev_id is a per-cpu variable
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
@@ -88,12 +89,13 @@ enum {
IRQ_MOVE_PCNTXT = (1 << 14),
IRQ_NESTED_THREAD = (1 << 15),
IRQ_NOTHREAD = (1 << 16),
+ IRQ_PER_CPU_DEVID = (1 << 17),
};
#define IRQF_MODIFY_MASK \
(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
- IRQ_PER_CPU | IRQ_NESTED_THREAD)
+ IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID)
#define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING)
@@ -367,6 +369,8 @@ enum {
struct irqaction;
extern int setup_irq(unsigned int irq, struct irqaction *new);
extern void remove_irq(unsigned int irq, struct irqaction *act);
+extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
+extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
extern void irq_cpu_online(void);
extern void irq_cpu_offline(void);
@@ -394,6 +398,7 @@ extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_nested_irq(unsigned int irq);
@@ -422,6 +427,8 @@ static inline void irq_set_chip_and_handler(unsigned int irq, struct irq_chip *c
irq_set_chip_and_handler_name(irq, chip, handle, NULL);
}
+extern int irq_set_percpu_devid(unsigned int irq);
+
extern void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name);
@@ -483,6 +490,13 @@ static inline void irq_set_nested_thread(unsigned int irq, bool nest)
irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
}
+static inline void irq_set_percpu_devid_flags(unsigned int irq)
+{
+ irq_set_status_flags(irq,
+ IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
+ IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
+}
+
/* Handle dynamic irq creation and destruction */
extern unsigned int create_irq_nr(unsigned int irq_want, int node);
extern int create_irq(void);
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 150134a..281ccd1 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -53,6 +53,7 @@ struct irq_desc {
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
raw_spinlock_t lock;
+ cpumask_var_t *percpu_enabled;
#ifdef CONFIG_SMP
const struct cpumask *affinity_hint;
struct irq_affinity_notify *affinity_notify;
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 5a38bf4..75c0631 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -60,6 +60,10 @@ config IRQ_DOMAIN
config IRQ_FORCED_THREADING
bool
+# Support per CPU dev id
+config IRQ_PERCPU_DEVID
+ bool
+
config SPARSE_IRQ
bool "Support sparse irq numbering"
depends on HAVE_SPARSE_IRQ
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index dc5114b..38942d8 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -204,6 +204,26 @@ void irq_disable(struct irq_desc *desc)
}
}
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_enable)
+ desc->irq_data.chip->irq_enable(&desc->irq_data);
+ else
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ cpumask_set_cpu(cpu, *desc->percpu_enabled);
+}
+
+void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_disable) {
+ desc->irq_data.chip->irq_disable(&desc->irq_data);
+ irq_state_set_masked(desc);
+ }
+ cpumask_clear_cpu(cpu, *desc->percpu_enabled);
+}
+#endif
+
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack)
@@ -544,6 +564,40 @@ handle_percpu_irq(unsigned int irq, struct irq_desc *desc)
chip->irq_eoi(&desc->irq_data);
}
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+/**
+ * handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
+ * @irq: the interrupt number
+ * @desc: the interrupt description structure for this irq
+ *
+ * Per CPU interrupts on SMP machines without locking requirements. Same as
+ * handle_percpu_irq() above but with the following extras:
+ *
+ * action->percpu_dev_id is a pointer to percpu variables which
+ * contain the real device id for the cpu on which this handler is
+ * called
+ */
+void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irqaction *action = desc->action;
+ void *dev_id = __this_cpu_ptr(action->percpu_dev_id);
+ irqreturn_t res;
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ trace_irq_handler_entry(irq, action);
+ res = action->handler(irq, dev_id);
+ trace_irq_handler_exit(irq, action, res);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+#endif
+
void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 6546431..04f8d5a 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -71,6 +71,8 @@ extern int irq_startup(struct irq_desc *desc);
extern void irq_shutdown(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
+extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
+extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
extern void mask_irq(struct irq_desc *desc);
extern void unmask_irq(struct irq_desc *desc);
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 039b889..fa93f4d 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -443,6 +443,31 @@ void __irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags, bool bus)
chip_bus_sync_unlock(desc);
}
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+int irq_set_percpu_devid(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return -EINVAL;
+
+ if (desc->percpu_enabled)
+ return -EINVAL;
+
+ desc->percpu_enabled = kzalloc(sizeof(*desc->percpu_enabled), GFP_KERNEL);
+
+ if (!desc->percpu_enabled ||
+ !zalloc_cpumask_var(desc->percpu_enabled, GFP_KERNEL)) {
+ kfree(desc->percpu_enabled);
+ desc->percpu_enabled = NULL;
+ return -ENOMEM;
+ }
+
+ irq_set_percpu_devid_flags(irq);
+ return 0;
+}
+#endif
+
/**
* dynamic_irq_cleanup - cleanup a dynamically allocated irq
* @irq: irq number to initialize
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 7e1a3ed..2e05d92 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1121,6 +1121,8 @@ int setup_irq(unsigned int irq, struct irqaction *act)
int retval;
struct irq_desc *desc = irq_to_desc(irq);
+ if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ return -EINVAL;
chip_bus_lock(desc);
retval = __setup_irq(irq, desc, act);
chip_bus_sync_unlock(desc);
@@ -1129,7 +1131,7 @@ int setup_irq(unsigned int irq, struct irqaction *act)
}
EXPORT_SYMBOL_GPL(setup_irq);
- /*
+/*
* Internal function to unregister an irqaction - used to free
* regular and special interrupts that are part of the architecture.
*/
@@ -1227,7 +1229,10 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
*/
void remove_irq(unsigned int irq, struct irqaction *act)
{
- __free_irq(irq, act->dev_id);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ __free_irq(irq, act->dev_id);
}
EXPORT_SYMBOL_GPL(remove_irq);
@@ -1249,7 +1254,7 @@ void free_irq(unsigned int irq, void *dev_id)
{
struct irq_desc *desc = irq_to_desc(irq);
- if (!desc)
+ if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return;
#ifdef CONFIG_SMP
@@ -1327,7 +1332,8 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler,
if (!desc)
return -EINVAL;
- if (!irq_settings_can_request(desc))
+ if (!irq_settings_can_request(desc) ||
+ WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return -EINVAL;
if (!handler) {
@@ -1412,3 +1418,195 @@ int request_any_context_irq(unsigned int irq, irq_handler_t handler,
return !ret ? IRQC_IS_HARDIRQ : ret;
}
EXPORT_SYMBOL_GPL(request_any_context_irq);
+
+#ifdef CONFIG_IRQ_PERCPU_DEVID
+void enable_percpu_irq(unsigned int irq)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+
+ if (!desc)
+ return;
+
+ irq_percpu_enable(desc, cpu);
+ irq_put_desc_busunlock(desc, flags);
+}
+EXPORT_SYMBOL_GPL(enable_percpu_irq);
+
+void disable_percpu_irq(unsigned int irq)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+
+ if (!desc)
+ return;
+
+ irq_percpu_disable(desc, cpu);
+ irq_put_desc_busunlock(desc, flags);
+}
+EXPORT_SYMBOL_GPL(disable_percpu_irq);
+
+/*
+ * Internal function to unregister a percpu irqaction.
+ */
+static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ unsigned long flags;
+
+ WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
+
+ if (!desc)
+ return NULL;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+
+ action = desc->action;
+ if (!action || action->percpu_dev_id != dev_id) {
+ WARN(1, "Trying to free already-free IRQ %d\n", irq);
+ goto bad;
+ }
+
+ if (!cpumask_empty(*desc->percpu_enabled)) {
+ WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
+ irq, cpumask_first(*desc->percpu_enabled));
+ goto bad;
+ }
+
+ /* Found it - now remove it from the list of entries: */
+ desc->action = NULL;
+
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+
+ unregister_handler_proc(irq, action);
+
+ module_put(desc->owner);
+ return action;
+
+bad:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ return NULL;
+}
+
+/**
+ * remove_percpu_irq - free a per-cpu interrupt
+ * @irq: Interrupt line to free
+ * @act: irqaction for the interrupt
+ *
+ * Used to remove interrupts statically setup by the early boot process.
+ */
+void remove_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && irq_settings_is_per_cpu_devid(desc))
+ __free_percpu_irq(irq, act->percpu_dev_id);
+}
+EXPORT_SYMBOL_GPL(remove_percpu_irq);
+
+/**
+ * free_percpu_irq - free an interrupt allocated with request_percpu_irq
+ * @irq: Interrupt line to free
+ * @dev_id: Device identity to free
+ *
+ * Remove a percpu interrupt handler. The handler is removed, but
+ * the interrupt line is not disabled. This must be done on each
+ * CPU before calling this function. The function does not return
+ * until any executing interrupts for this IRQ have completed.
+ *
+ * This function must not be called from interrupt context.
+ */
+void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc || !irq_settings_is_per_cpu_devid(desc))
+ return;
+
+#ifdef CONFIG_SMP
+ if (WARN_ON(desc->affinity_notify))
+ desc->affinity_notify = NULL;
+#endif
+
+ chip_bus_lock(desc);
+ kfree(__free_percpu_irq(irq, dev_id));
+ chip_bus_sync_unlock(desc);
+}
+EXPORT_SYMBOL_GPL(free_percpu_irq);
+
+/**
+ * setup_percpu_irq - setup a per-cpu interrupt
+ * @irq: Interrupt line to setup
+ * @act: irqaction for the interrupt
+ *
+ * Used to statically setup per-cpu interrupts in the early boot process.
+ */
+int setup_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ int retval;
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, act);
+ chip_bus_sync_unlock(desc);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(setup_percpu_irq);
+
+/**
+ * request_percpu_irq - allocate a percpu interrupt line
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs.
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A percpu cookie passed back to the handler function
+ *
+ * This call allocates interrupt resources, but doesn't
+ * automatically enable the interrupt. It has to be done on each
+ * CPU using enable_percpu_irq().
+ *
+ * Dev_id must be globally unique. It is a per-cpu variable, and
+ * the handler gets called with the interrupted CPU's instance of
+ * that variable.
+ */
+int request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *dev_id)
+{
+ struct irqaction *action;
+ struct irq_desc *desc;
+ int retval;
+
+ if (!dev_id)
+ return -EINVAL;
+
+ desc = irq_to_desc(irq);
+ if (!desc || !irq_settings_can_request(desc) ||
+ !irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+
+ action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
+ if (!action)
+ return -ENOMEM;
+
+ action->handler = handler;
+ action->flags = IRQF_PERCPU;
+ action->name = devname;
+ action->percpu_dev_id = dev_id;
+
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, action);
+ chip_bus_sync_unlock(desc);
+
+ if (retval)
+ kfree(action);
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(request_percpu_irq);
+
+#endif
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index f166783..1162f10 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -13,6 +13,7 @@ enum {
_IRQ_MOVE_PCNTXT = IRQ_MOVE_PCNTXT,
_IRQ_NO_BALANCING = IRQ_NO_BALANCING,
_IRQ_NESTED_THREAD = IRQ_NESTED_THREAD,
+ _IRQ_PER_CPU_DEVID = IRQ_PER_CPU_DEVID,
_IRQF_MODIFY_MASK = IRQF_MODIFY_MASK,
};
@@ -24,6 +25,7 @@ enum {
#define IRQ_NOTHREAD GOT_YOU_MORON
#define IRQ_NOAUTOEN GOT_YOU_MORON
#define IRQ_NESTED_THREAD GOT_YOU_MORON
+#define IRQ_PER_CPU_DEVID GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
#define IRQF_MODIFY_MASK GOT_YOU_MORON
@@ -39,6 +41,11 @@ static inline bool irq_settings_is_per_cpu(struct irq_desc *desc)
return desc->status_use_accessors & _IRQ_PER_CPU;
}
+static inline bool irq_settings_is_per_cpu_devid(struct irq_desc *desc)
+{
+ return desc->status_use_accessors & _IRQ_PER_CPU_DEVID;
+}
+
static inline void irq_settings_set_per_cpu(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_PER_CPU;
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* Re: [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts
2011-09-23 16:03 ` Marc Zyngier
@ 2011-09-29 5:56 ` Abhijeet Dharmapurikar
-1 siblings, 0 replies; 19+ messages in thread
From: Abhijeet Dharmapurikar @ 2011-09-29 5:56 UTC (permalink / raw)
To: Marc Zyngier; +Cc: linux-arm-kernel, linux-kernel, Thomas Gleixner
On 09/23/2011 09:03 AM, Marc Zyngier wrote:
> The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
> which are usually used to connect local timers to each core.
> Each CPU has its own private interface to the GIC,
> and only sees the PPIs that are directly connect to it.
>
> While these timers are separate devices and have a separate
> interrupt line to a core, they all use the same IRQ number.
>
> For these devices, request_irq() is not the right API as it
> assumes that an IRQ number is visible by a number of CPUs
> (through the affinity setting), but makes it very awkward to
> express that an IRQ number can be handled by all CPUs, and
> yet be a different interrupt line on each CPU, requiring a
> different dev_id cookie to be passed back to the handler.
>
> The *_percpu_irq() functions is designed to overcome these
> limitations, by providing a per-cpu dev_id vector:
>
> int request_percpu_irq(unsigned int irq, irq_handler_t handler,
> const char *devname, void __percpu *percpu_dev_id);
> void free_percpu_irq(unsigned int, void __percpu *);
> int setup_percpu_irq(unsigned int irq, struct irqaction *new);
> void remove_percpu_irq(unsigned int irq, struct irqaction *act);
> void enable_percpu_irq(unsigned int irq);
As mentioned here
https://lkml.org/lkml/2011/9/25/121
can we add irqflags to enable_percpu_irq? This will make msm's
usage cleaner and it wont have to rely on accessing the gic
registers outside the driver.
---
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm
Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts
@ 2011-09-29 5:56 ` Abhijeet Dharmapurikar
0 siblings, 0 replies; 19+ messages in thread
From: Abhijeet Dharmapurikar @ 2011-09-29 5:56 UTC (permalink / raw)
To: linux-arm-kernel
On 09/23/2011 09:03 AM, Marc Zyngier wrote:
> The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
> which are usually used to connect local timers to each core.
> Each CPU has its own private interface to the GIC,
> and only sees the PPIs that are directly connect to it.
>
> While these timers are separate devices and have a separate
> interrupt line to a core, they all use the same IRQ number.
>
> For these devices, request_irq() is not the right API as it
> assumes that an IRQ number is visible by a number of CPUs
> (through the affinity setting), but makes it very awkward to
> express that an IRQ number can be handled by all CPUs, and
> yet be a different interrupt line on each CPU, requiring a
> different dev_id cookie to be passed back to the handler.
>
> The *_percpu_irq() functions is designed to overcome these
> limitations, by providing a per-cpu dev_id vector:
>
> int request_percpu_irq(unsigned int irq, irq_handler_t handler,
> const char *devname, void __percpu *percpu_dev_id);
> void free_percpu_irq(unsigned int, void __percpu *);
> int setup_percpu_irq(unsigned int irq, struct irqaction *new);
> void remove_percpu_irq(unsigned int irq, struct irqaction *act);
> void enable_percpu_irq(unsigned int irq);
As mentioned here
https://lkml.org/lkml/2011/9/25/121
can we add irqflags to enable_percpu_irq? This will make msm's
usage cleaner and it wont have to rely on accessing the gic
registers outside the driver.
---
Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm
Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts
2011-09-29 5:56 ` Abhijeet Dharmapurikar
@ 2011-09-30 11:08 ` Marc Zyngier
-1 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-30 11:08 UTC (permalink / raw)
To: Abhijeet Dharmapurikar; +Cc: linux-arm-kernel, linux-kernel, Thomas Gleixner
[-- Attachment #1: Type: text/plain, Size: 1861 bytes --]
On 29/09/11 06:56, Abhijeet Dharmapurikar wrote:
> On 09/23/2011 09:03 AM, Marc Zyngier wrote:
>> The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
>> which are usually used to connect local timers to each core.
>> Each CPU has its own private interface to the GIC,
>> and only sees the PPIs that are directly connect to it.
>>
>> While these timers are separate devices and have a separate
>> interrupt line to a core, they all use the same IRQ number.
>>
>> For these devices, request_irq() is not the right API as it
>> assumes that an IRQ number is visible by a number of CPUs
>> (through the affinity setting), but makes it very awkward to
>> express that an IRQ number can be handled by all CPUs, and
>> yet be a different interrupt line on each CPU, requiring a
>> different dev_id cookie to be passed back to the handler.
>>
>> The *_percpu_irq() functions is designed to overcome these
>> limitations, by providing a per-cpu dev_id vector:
>>
>> int request_percpu_irq(unsigned int irq, irq_handler_t handler,
>> const char *devname, void __percpu *percpu_dev_id);
>> void free_percpu_irq(unsigned int, void __percpu *);
>> int setup_percpu_irq(unsigned int irq, struct irqaction *new);
>> void remove_percpu_irq(unsigned int irq, struct irqaction *act);
>> void enable_percpu_irq(unsigned int irq);
>
> As mentioned here
> https://lkml.org/lkml/2011/9/25/121
>
> can we add irqflags to enable_percpu_irq? This will make msm's
> usage cleaner and it wont have to rely on accessing the gic
> registers outside the driver.
I have the attached patch in my tree (and obviously hacked the
corresponding timer code).
Can you give it a whirl by removing your private GIC configuration and
passing the type to enable_percpu_irq()?
Thanks,
M.
--
Jazz is not dead. It just smells funny...
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-genirq-percpu-allow-interrupt-type-to-be-set-at-enab.patch --]
[-- Type: text/x-patch; name=0001-genirq-percpu-allow-interrupt-type-to-be-set-at-enab.patch, Size: 2214 bytes --]
>From 9b1df95320aea19dce7232e8b7d66104c380aed2 Mon Sep 17 00:00:00 2001
From: Marc Zyngier <marc.zyngier@arm.com>
Date: Fri, 30 Sep 2011 10:48:47 +0100
Subject: [PATCH] genirq: percpu: allow interrupt type to be set at enable time
As request_percpu_irq() doesn't allow for a percpu interrupt
to have its type configured (it is generally impossible to
configure it on all CPUs at once), add a 'type' argument to
enable_percpu_irq().
This allows some low-level, board specific init code to
be switched to a generic API.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
include/linux/interrupt.h | 2 +-
kernel/irq/manage.c | 15 ++++++++++++++-
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 1cdfd09..664544f 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -223,7 +223,7 @@ extern void disable_irq_nosync(unsigned int irq);
extern void disable_irq(unsigned int irq);
extern void disable_percpu_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
-extern void enable_percpu_irq(unsigned int irq);
+extern void enable_percpu_irq(unsigned int irq, unsigned int type);
/* The following three functions are for the core kernel use only. */
#ifdef CONFIG_GENERIC_HARDIRQS
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 7b4b156..e647ce1 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -1419,7 +1419,7 @@ int request_any_context_irq(unsigned int irq, irq_handler_t handler,
}
EXPORT_SYMBOL_GPL(request_any_context_irq);
-void enable_percpu_irq(unsigned int irq)
+void enable_percpu_irq(unsigned int irq, unsigned int type)
{
unsigned int cpu = smp_processor_id();
unsigned long flags;
@@ -1428,7 +1428,20 @@ void enable_percpu_irq(unsigned int irq)
if (!desc)
return;
+ type &= IRQ_TYPE_SENSE_MASK;
+ if (type != IRQ_TYPE_NONE) {
+ int ret;
+
+ ret = __irq_set_trigger(desc, irq, type);
+
+ if (ret) {
+ WARN(1, "failed to set type for IRQ%d\n");
+ goto out;
+ }
+ }
+
irq_percpu_enable(desc, cpu);
+out:
irq_put_desc_unlock(desc, flags);
}
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v3 1/3] genirq: add support for per-cpu dev_id interrupts
@ 2011-09-30 11:08 ` Marc Zyngier
0 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-30 11:08 UTC (permalink / raw)
To: linux-arm-kernel
On 29/09/11 06:56, Abhijeet Dharmapurikar wrote:
> On 09/23/2011 09:03 AM, Marc Zyngier wrote:
>> The ARM GIC interrupt controller offers per CPU interrupts (PPIs),
>> which are usually used to connect local timers to each core.
>> Each CPU has its own private interface to the GIC,
>> and only sees the PPIs that are directly connect to it.
>>
>> While these timers are separate devices and have a separate
>> interrupt line to a core, they all use the same IRQ number.
>>
>> For these devices, request_irq() is not the right API as it
>> assumes that an IRQ number is visible by a number of CPUs
>> (through the affinity setting), but makes it very awkward to
>> express that an IRQ number can be handled by all CPUs, and
>> yet be a different interrupt line on each CPU, requiring a
>> different dev_id cookie to be passed back to the handler.
>>
>> The *_percpu_irq() functions is designed to overcome these
>> limitations, by providing a per-cpu dev_id vector:
>>
>> int request_percpu_irq(unsigned int irq, irq_handler_t handler,
>> const char *devname, void __percpu *percpu_dev_id);
>> void free_percpu_irq(unsigned int, void __percpu *);
>> int setup_percpu_irq(unsigned int irq, struct irqaction *new);
>> void remove_percpu_irq(unsigned int irq, struct irqaction *act);
>> void enable_percpu_irq(unsigned int irq);
>
> As mentioned here
> https://lkml.org/lkml/2011/9/25/121
>
> can we add irqflags to enable_percpu_irq? This will make msm's
> usage cleaner and it wont have to rely on accessing the gic
> registers outside the driver.
I have the attached patch in my tree (and obviously hacked the
corresponding timer code).
Can you give it a whirl by removing your private GIC configuration and
passing the type to enable_percpu_irq()?
Thanks,
M.
--
Jazz is not dead. It just smells funny...
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 2/3] ARM: gic: consolidate PPI handling
2011-09-23 16:03 ` Marc Zyngier
@ 2011-09-23 16:03 ` Marc Zyngier
-1 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel
Cc: Kukjin Kim, David Brown, Bryan Huntsman, Tony Lindgren,
Paul Mundt, Magnus Damm, Thomas Gleixner
PPI handling is a bit of an odd beast. It uses its own low level
handling code and is hardwired to the local timers (hence lacking
a registration interface).
Instead, switch the low handling to the normal SPI handling code.
PPIs are handled by the handle_percpu_devid_irq flow.
This also allows the removal of some duplicated code.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/common/Kconfig | 1 +
arch/arm/common/gic.c | 70 +++++++++++++++++++-
arch/arm/include/asm/entry-macro-multi.S | 7 --
arch/arm/include/asm/hardirq.h | 3 -
arch/arm/include/asm/hardware/entry-macro-gic.S | 19 +-----
arch/arm/include/asm/localtimer.h | 6 +-
arch/arm/include/asm/smp.h | 5 --
arch/arm/kernel/irq.c | 3 -
arch/arm/kernel/smp.c | 27 ++------
arch/arm/mach-exynos4/include/mach/entry-macro.S | 6 +--
arch/arm/mach-msm/board-msm8x60.c | 11 ---
arch/arm/mach-msm/include/mach/entry-macro-qgic.S | 73 +--------------------
arch/arm/mach-omap2/include/mach/entry-macro.S | 14 +----
arch/arm/mach-shmobile/entry-intc.S | 3 -
arch/arm/mach-shmobile/include/mach/entry-macro.S | 3 -
15 files changed, 84 insertions(+), 167 deletions(-)
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4b71766..114a432 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,4 +1,5 @@
config ARM_GIC
+ select IRQ_PERCPU_DEVID
bool
config ARM_VIC
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index bdbb3f7..9b83077 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -28,10 +28,14 @@
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
+#include <asm/localtimer.h>
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -255,6 +259,32 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
+#ifdef CONFIG_LOCAL_TIMERS
+#define gic_ppi_handler percpu_timer_handler
+#else
+static irqreturn_t gic_ppi_handler(int irq, void *dev_id)
+{
+ return IRQ_NONE;
+}
+#endif
+
+#define PPI_IRQACT(nr) \
+ { \
+ .handler = gic_ppi_handler, \
+ .flags = IRQF_PERCPU | IRQF_TIMER, \
+ .irq = nr, \
+ .name = "PPI-" # nr, \
+ }
+
+static struct irqaction ppi_irqaction_template[16] __initdata = {
+ PPI_IRQACT(0), PPI_IRQACT(1), PPI_IRQACT(2), PPI_IRQACT(3),
+ PPI_IRQACT(4), PPI_IRQACT(5), PPI_IRQACT(6), PPI_IRQACT(7),
+ PPI_IRQACT(8), PPI_IRQACT(9), PPI_IRQACT(10), PPI_IRQACT(11),
+ PPI_IRQACT(12), PPI_IRQACT(13), PPI_IRQACT(14), PPI_IRQACT(15),
+};
+
+static struct irqaction *ppi_irqaction;
+
static void __init gic_dist_init(struct gic_chip_data *gic,
unsigned int irq_start)
{
@@ -262,6 +292,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
u32 cpumask;
void __iomem *base = gic->dist_base;
u32 cpu = 0;
+ u32 nrppis = 0, ppi_base = 0;
#ifdef CONFIG_SMP
cpu = cpu_logical_map(smp_processor_id());
@@ -283,6 +314,28 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
gic_irqs = 1020;
/*
+ * Nobody would be insane enough to use PPIs on a secondary
+ * GIC, right?
+ */
+ if (gic == &gic_data[0]) {
+ nrppis = 16 - (irq_start & 15);
+ ppi_base = gic->irq_offset + 32 - nrppis;
+
+ ppi_irqaction = kmemdup(&ppi_irqaction_template[16 - nrppis],
+ sizeof(*ppi_irqaction) * nrppis,
+ GFP_KERNEL);
+
+ if (nrppis && !ppi_irqaction) {
+ pr_err("GIC: Can't allocate PPI memory");
+ nrppis = 0;
+ ppi_base = 0;
+ }
+ }
+
+ pr_info("Configuring GIC with %d sources (%d PPIs)\n",
+ gic_irqs, (gic == &gic_data[0]) ? nrppis : 0);
+
+ /*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
@@ -317,7 +370,22 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < irq_limit; i++) {
+ for (i = 0; i < nrppis; i++) {
+ int ppi = i + ppi_base;
+ int err;
+
+ irq_set_percpu_devid(ppi);
+ irq_set_chip_and_handler(ppi, &gic_chip,
+ handle_percpu_devid_irq);
+ irq_set_chip_data(ppi, gic);
+ set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
+
+ err = setup_percpu_irq(ppi, &ppi_irqaction[i]);
+ if (err)
+ pr_err("GIC: can't setup PPI%d (%d)\n", ppi, err);
+ }
+
+ for (i = irq_start + nrppis; i < irq_limit; i++) {
irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
irq_set_chip_data(i, gic);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2f1e209..88d6181 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -25,13 +25,6 @@
movne r1, sp
adrne lr, BSYM(1b)
bne do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
- test_for_ltirq r0, r2, r6, lr
- movne r0, sp
- adrne lr, BSYM(1b)
- bne do_local_timer
-#endif
#endif
9997:
.endm
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 89ad180..ddf07a9 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -9,9 +9,6 @@
typedef struct {
unsigned int __softirq_pending;
-#ifdef CONFIG_LOCAL_TIMERS
- unsigned int local_timer_irqs;
-#endif
#ifdef CONFIG_SMP
unsigned int ipi_irqs[NR_IPI];
#endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index c115b82..74ebc80 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -22,15 +22,11 @@
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 16-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
@@ -43,7 +39,7 @@
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -62,14 +58,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
-/* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 080d74f..e3663f7 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARM_LOCALTIMER_H
#define __ASM_ARM_LOCALTIMER_H
+#include <linux/interrupt.h>
+
struct clock_event_device;
/*
@@ -18,9 +20,9 @@ struct clock_event_device;
void percpu_timer_setup(void);
/*
- * Called from assembly, this is the local timer IRQ handler
+ * Per-cpu timer IRQ handler
*/
-asmlinkage void do_local_timer(struct pt_regs *);
+irqreturn_t percpu_timer_handler(int irq, void *dev_id);
#ifdef CONFIG_LOCAL_TIMERS
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 674ebcd..7c2299f 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -94,9 +94,4 @@ extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *, int);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index e20a5d0..8e744f6 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -58,9 +58,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
#ifdef CONFIG_SMP
show_ipi_list(p, prec);
#endif
-#ifdef CONFIG_LOCAL_TIMERS
- show_local_irqs(p, prec);
-#endif
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e08d2e8..8f73342 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -504,10 +504,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu)
for (i = 0; i < NR_IPI; i++)
sum += __get_irq_stat(cpu, ipi_irqs[i]);
-#ifdef CONFIG_LOCAL_TIMERS
- sum += __get_irq_stat(cpu, local_timer_irqs);
-#endif
-
return sum;
}
@@ -525,29 +521,16 @@ static void ipi_timer(void)
}
#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
+irqreturn_t percpu_timer_handler(int irq, void *dev_id)
{
- struct pt_regs *old_regs = set_irq_regs(regs);
- int cpu = smp_processor_id();
+ struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
if (local_timer_ack()) {
- __inc_irq_stat(cpu, local_timer_irqs);
- ipi_timer();
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
}
- set_irq_regs(old_regs);
-}
-
-void show_local_irqs(struct seq_file *p, int prec)
-{
- unsigned int cpu;
-
- seq_printf(p, "%*s: ", prec, "LOC");
-
- for_each_present_cpu(cpu)
- seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
-
- seq_printf(p, " Local timer interrupts\n");
+ return IRQ_NONE;
}
#endif
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d7a1e28..807d05d 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -55,7 +55,7 @@
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -77,7 +77,3 @@
cmpcs \irqnr, \irqnr
.endm
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index a4bd858..30c6b58 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -53,8 +53,6 @@ static void __init msm8x60_map_io(void)
static void __init msm8x60_init_irq(void)
{
- unsigned int i;
-
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
@@ -66,15 +64,6 @@ static void __init msm8x60_init_irq(void)
*/
if (!machine_is_msm8x60_sim())
writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
}
static void __init msm8x60_init(void)
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ceb8b7e..feb90a1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -78,7 +78,7 @@
4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -101,18 +101,6 @@
it cs
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- itt eq
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
index cac0a7a..1a1c00c 100644
--- a/arch/arm/mach-shmobile/entry-intc.S
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -51,7 +51,4 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index d791f10..8d4a416 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -27,8 +27,5 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v3 2/3] ARM: gic: consolidate PPI handling
@ 2011-09-23 16:03 ` Marc Zyngier
0 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel
PPI handling is a bit of an odd beast. It uses its own low level
handling code and is hardwired to the local timers (hence lacking
a registration interface).
Instead, switch the low handling to the normal SPI handling code.
PPIs are handled by the handle_percpu_devid_irq flow.
This also allows the removal of some duplicated code.
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: David Brown <davidb@codeaurora.org>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/common/Kconfig | 1 +
arch/arm/common/gic.c | 70 +++++++++++++++++++-
arch/arm/include/asm/entry-macro-multi.S | 7 --
arch/arm/include/asm/hardirq.h | 3 -
arch/arm/include/asm/hardware/entry-macro-gic.S | 19 +-----
arch/arm/include/asm/localtimer.h | 6 +-
arch/arm/include/asm/smp.h | 5 --
arch/arm/kernel/irq.c | 3 -
arch/arm/kernel/smp.c | 27 ++------
arch/arm/mach-exynos4/include/mach/entry-macro.S | 6 +--
arch/arm/mach-msm/board-msm8x60.c | 11 ---
arch/arm/mach-msm/include/mach/entry-macro-qgic.S | 73 +--------------------
arch/arm/mach-omap2/include/mach/entry-macro.S | 14 +----
arch/arm/mach-shmobile/entry-intc.S | 3 -
arch/arm/mach-shmobile/include/mach/entry-macro.S | 3 -
15 files changed, 84 insertions(+), 167 deletions(-)
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 4b71766..114a432 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,4 +1,5 @@
config ARM_GIC
+ select IRQ_PERCPU_DEVID
bool
config ARM_VIC
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index bdbb3f7..9b83077 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -28,10 +28,14 @@
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
+#include <asm/localtimer.h>
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -255,6 +259,32 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
+#ifdef CONFIG_LOCAL_TIMERS
+#define gic_ppi_handler percpu_timer_handler
+#else
+static irqreturn_t gic_ppi_handler(int irq, void *dev_id)
+{
+ return IRQ_NONE;
+}
+#endif
+
+#define PPI_IRQACT(nr) \
+ { \
+ .handler = gic_ppi_handler, \
+ .flags = IRQF_PERCPU | IRQF_TIMER, \
+ .irq = nr, \
+ .name = "PPI-" # nr, \
+ }
+
+static struct irqaction ppi_irqaction_template[16] __initdata = {
+ PPI_IRQACT(0), PPI_IRQACT(1), PPI_IRQACT(2), PPI_IRQACT(3),
+ PPI_IRQACT(4), PPI_IRQACT(5), PPI_IRQACT(6), PPI_IRQACT(7),
+ PPI_IRQACT(8), PPI_IRQACT(9), PPI_IRQACT(10), PPI_IRQACT(11),
+ PPI_IRQACT(12), PPI_IRQACT(13), PPI_IRQACT(14), PPI_IRQACT(15),
+};
+
+static struct irqaction *ppi_irqaction;
+
static void __init gic_dist_init(struct gic_chip_data *gic,
unsigned int irq_start)
{
@@ -262,6 +292,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
u32 cpumask;
void __iomem *base = gic->dist_base;
u32 cpu = 0;
+ u32 nrppis = 0, ppi_base = 0;
#ifdef CONFIG_SMP
cpu = cpu_logical_map(smp_processor_id());
@@ -283,6 +314,28 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
gic_irqs = 1020;
/*
+ * Nobody would be insane enough to use PPIs on a secondary
+ * GIC, right?
+ */
+ if (gic == &gic_data[0]) {
+ nrppis = 16 - (irq_start & 15);
+ ppi_base = gic->irq_offset + 32 - nrppis;
+
+ ppi_irqaction = kmemdup(&ppi_irqaction_template[16 - nrppis],
+ sizeof(*ppi_irqaction) * nrppis,
+ GFP_KERNEL);
+
+ if (nrppis && !ppi_irqaction) {
+ pr_err("GIC: Can't allocate PPI memory");
+ nrppis = 0;
+ ppi_base = 0;
+ }
+ }
+
+ pr_info("Configuring GIC with %d sources (%d PPIs)\n",
+ gic_irqs, (gic == &gic_data[0]) ? nrppis : 0);
+
+ /*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
@@ -317,7 +370,22 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < irq_limit; i++) {
+ for (i = 0; i < nrppis; i++) {
+ int ppi = i + ppi_base;
+ int err;
+
+ irq_set_percpu_devid(ppi);
+ irq_set_chip_and_handler(ppi, &gic_chip,
+ handle_percpu_devid_irq);
+ irq_set_chip_data(ppi, gic);
+ set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
+
+ err = setup_percpu_irq(ppi, &ppi_irqaction[i]);
+ if (err)
+ pr_err("GIC: can't setup PPI%d (%d)\n", ppi, err);
+ }
+
+ for (i = irq_start + nrppis; i < irq_limit; i++) {
irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
irq_set_chip_data(i, gic);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2f1e209..88d6181 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -25,13 +25,6 @@
movne r1, sp
adrne lr, BSYM(1b)
bne do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
- test_for_ltirq r0, r2, r6, lr
- movne r0, sp
- adrne lr, BSYM(1b)
- bne do_local_timer
-#endif
#endif
9997:
.endm
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 89ad180..ddf07a9 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -9,9 +9,6 @@
typedef struct {
unsigned int __softirq_pending;
-#ifdef CONFIG_LOCAL_TIMERS
- unsigned int local_timer_irqs;
-#endif
#ifdef CONFIG_SMP
unsigned int ipi_irqs[NR_IPI];
#endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index c115b82..74ebc80 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -22,15 +22,11 @@
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 16-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
@@ -43,7 +39,7 @@
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -62,14 +58,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
-/* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 080d74f..e3663f7 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARM_LOCALTIMER_H
#define __ASM_ARM_LOCALTIMER_H
+#include <linux/interrupt.h>
+
struct clock_event_device;
/*
@@ -18,9 +20,9 @@ struct clock_event_device;
void percpu_timer_setup(void);
/*
- * Called from assembly, this is the local timer IRQ handler
+ * Per-cpu timer IRQ handler
*/
-asmlinkage void do_local_timer(struct pt_regs *);
+irqreturn_t percpu_timer_handler(int irq, void *dev_id);
#ifdef CONFIG_LOCAL_TIMERS
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 674ebcd..7c2299f 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -94,9 +94,4 @@ extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *, int);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index e20a5d0..8e744f6 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -58,9 +58,6 @@ int arch_show_interrupts(struct seq_file *p, int prec)
#ifdef CONFIG_SMP
show_ipi_list(p, prec);
#endif
-#ifdef CONFIG_LOCAL_TIMERS
- show_local_irqs(p, prec);
-#endif
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e08d2e8..8f73342 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -504,10 +504,6 @@ u64 smp_irq_stat_cpu(unsigned int cpu)
for (i = 0; i < NR_IPI; i++)
sum += __get_irq_stat(cpu, ipi_irqs[i]);
-#ifdef CONFIG_LOCAL_TIMERS
- sum += __get_irq_stat(cpu, local_timer_irqs);
-#endif
-
return sum;
}
@@ -525,29 +521,16 @@ static void ipi_timer(void)
}
#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
+irqreturn_t percpu_timer_handler(int irq, void *dev_id)
{
- struct pt_regs *old_regs = set_irq_regs(regs);
- int cpu = smp_processor_id();
+ struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
if (local_timer_ack()) {
- __inc_irq_stat(cpu, local_timer_irqs);
- ipi_timer();
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
}
- set_irq_regs(old_regs);
-}
-
-void show_local_irqs(struct seq_file *p, int prec)
-{
- unsigned int cpu;
-
- seq_printf(p, "%*s: ", prec, "LOC");
-
- for_each_present_cpu(cpu)
- seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
-
- seq_printf(p, " Local timer interrupts\n");
+ return IRQ_NONE;
}
#endif
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index d7a1e28..807d05d 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -55,7 +55,7 @@
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -77,7 +77,3 @@
cmpcs \irqnr, \irqnr
.endm
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index a4bd858..30c6b58 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -53,8 +53,6 @@ static void __init msm8x60_map_io(void)
static void __init msm8x60_init_irq(void)
{
- unsigned int i;
-
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
@@ -66,15 +64,6 @@ static void __init msm8x60_init_irq(void)
*/
if (!machine_is_msm8x60_sim())
writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
}
static void __init msm8x60_init(void)
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ceb8b7e..feb90a1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -78,7 +78,7 @@
4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -101,18 +101,6 @@
it cs
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- itt eq
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
index cac0a7a..1a1c00c 100644
--- a/arch/arm/mach-shmobile/entry-intc.S
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -51,7 +51,4 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index d791f10..8d4a416 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -27,8 +27,5 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v3 2/3] ARM: gic: consolidate PPI handling
2011-09-23 16:03 ` Marc Zyngier
(?)
@ 2011-09-28 0:59 ` Tony Lindgren
-1 siblings, 0 replies; 19+ messages in thread
From: Tony Lindgren @ 2011-09-28 0:59 UTC (permalink / raw)
To: linux-arm-kernel
* Marc Zyngier <marc.zyngier@arm.com> [110923 12:03]:
> PPI handling is a bit of an odd beast. It uses its own low level
> handling code and is hardwired to the local timers (hence lacking
> a registration interface).
>
> Instead, switch the low handling to the normal SPI handling code.
> PPIs are handled by the handle_percpu_devid_irq flow.
>
> This also allows the removal of some duplicated code.
>
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: David Brown <davidb@codeaurora.org>
> Cc: Bryan Huntsman <bryanh@codeaurora.org>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Paul Mundt <lethal@linux-sh.org>
> Cc: Magnus Damm <magnus.damm@gmail.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
For the omap changes:
Tested-by: Tony Lindgren <tony@atomide.com>
(Sorry had to dig this one from the archive, looks like
the Cc addresses might be left out)
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 3/3] ARM: gic, local timers: use the request_percpu_irq() interface
2011-09-23 16:03 ` Marc Zyngier
@ 2011-09-23 16:03 ` Marc Zyngier
-1 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel, linux-kernel; +Cc: David Brown, Thomas Gleixner
This patch remove the hardcoded link between local timers and PPIs,
and convert the PPI users (TWD and MSM timers) to the new *_percpu_irq
interface. Also some collateral cleanup (local_timer_ack() is gone,
and the interrupt handler is strictly private to each driver).
PPIs are now useable for more than just the local timers.
Cc: David Brown <davidb@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/common/gic.c | 52 --------------------------
arch/arm/include/asm/hardware/gic.h | 1 -
arch/arm/include/asm/localtimer.h | 17 ++++-----
arch/arm/include/asm/smp_twd.h | 2 +-
arch/arm/kernel/smp.c | 16 +--------
arch/arm/kernel/smp_twd.c | 47 +++++++++++++++++++++++-
arch/arm/mach-exynos4/mct.c | 5 ---
arch/arm/mach-msm/timer.c | 69 ++++++++++++++++++++---------------
8 files changed, 94 insertions(+), 115 deletions(-)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 9b83077..a3f335c 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -35,7 +35,6 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
-#include <asm/localtimer.h>
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -259,32 +258,6 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-#ifdef CONFIG_LOCAL_TIMERS
-#define gic_ppi_handler percpu_timer_handler
-#else
-static irqreturn_t gic_ppi_handler(int irq, void *dev_id)
-{
- return IRQ_NONE;
-}
-#endif
-
-#define PPI_IRQACT(nr) \
- { \
- .handler = gic_ppi_handler, \
- .flags = IRQF_PERCPU | IRQF_TIMER, \
- .irq = nr, \
- .name = "PPI-" # nr, \
- }
-
-static struct irqaction ppi_irqaction_template[16] __initdata = {
- PPI_IRQACT(0), PPI_IRQACT(1), PPI_IRQACT(2), PPI_IRQACT(3),
- PPI_IRQACT(4), PPI_IRQACT(5), PPI_IRQACT(6), PPI_IRQACT(7),
- PPI_IRQACT(8), PPI_IRQACT(9), PPI_IRQACT(10), PPI_IRQACT(11),
- PPI_IRQACT(12), PPI_IRQACT(13), PPI_IRQACT(14), PPI_IRQACT(15),
-};
-
-static struct irqaction *ppi_irqaction;
-
static void __init gic_dist_init(struct gic_chip_data *gic,
unsigned int irq_start)
{
@@ -320,16 +293,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
if (gic == &gic_data[0]) {
nrppis = 16 - (irq_start & 15);
ppi_base = gic->irq_offset + 32 - nrppis;
-
- ppi_irqaction = kmemdup(&ppi_irqaction_template[16 - nrppis],
- sizeof(*ppi_irqaction) * nrppis,
- GFP_KERNEL);
-
- if (nrppis && !ppi_irqaction) {
- pr_err("GIC: Can't allocate PPI memory");
- nrppis = 0;
- ppi_base = 0;
- }
}
pr_info("Configuring GIC with %d sources (%d PPIs)\n",
@@ -372,17 +335,12 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
*/
for (i = 0; i < nrppis; i++) {
int ppi = i + ppi_base;
- int err;
irq_set_percpu_devid(ppi);
irq_set_chip_and_handler(ppi, &gic_chip,
handle_percpu_devid_irq);
irq_set_chip_data(ppi, gic);
set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
-
- err = setup_percpu_irq(ppi, &ppi_irqaction[i]);
- if (err)
- pr_err("GIC: can't setup PPI%d (%d)\n", ppi, err);
}
for (i = irq_start + nrppis; i < irq_limit; i++) {
@@ -443,16 +401,6 @@ void __cpuinit gic_secondary_init(unsigned int gic_nr)
gic_cpu_init(&gic_data[gic_nr]);
}
-void __cpuinit gic_enable_ppi(unsigned int irq)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- irq_set_status_flags(irq, IRQ_NOPROBE);
- gic_unmask_irq(irq_get_irq_data(irq));
- local_irq_restore(flags);
-}
-
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..2dadd50 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -40,7 +40,6 @@ void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-void gic_enable_ppi(unsigned int);
struct gic_chip_data {
unsigned int irq_offset;
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index e3663f7..f5e1cec 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -19,27 +19,20 @@ struct clock_event_device;
*/
void percpu_timer_setup(void);
-/*
- * Per-cpu timer IRQ handler
- */
-irqreturn_t percpu_timer_handler(int irq, void *dev_id);
-
-
#ifdef CONFIG_LOCAL_TIMERS
#ifdef CONFIG_HAVE_ARM_TWD
#include "smp_twd.h"
-#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop(c) twd_timer_stop((c))
#else
/*
- * Platform provides this to acknowledge a local timer IRQ.
- * Returns true if the local timer IRQ is to be processed.
+ * Stop the local timer
*/
-int local_timer_ack(void);
+void local_timer_stop(struct clock_event_device *);
#endif
@@ -54,6 +47,10 @@ static inline int local_timer_setup(struct clock_event_device *evt)
{
return -ENXIO;
}
+
+static inline void local_timer_stop(struct clock_event_device *evt)
+{
+}
#endif
#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index fed9981..ef9ffba 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,7 @@ struct clock_event_device;
extern void __iomem *twd_base;
-int twd_timer_ack(void);
void twd_timer_setup(struct clock_event_device *);
+void twd_timer_stop(struct clock_event_device *);
#endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8f73342..fcca40b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -520,20 +520,6 @@ static void ipi_timer(void)
irq_exit();
}
-#ifdef CONFIG_LOCAL_TIMERS
-irqreturn_t percpu_timer_handler(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-
- if (local_timer_ack()) {
- evt->event_handler(evt);
- return IRQ_HANDLED;
- }
-
- return IRQ_NONE;
-}
-#endif
-
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
static void smp_timer_broadcast(const struct cpumask *mask)
{
@@ -584,7 +570,7 @@ static void percpu_timer_stop(void)
unsigned int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ local_timer_stop(evt);
}
#endif
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 01c1862..566c0fe 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
#include <asm/hardware/gic.h>
/* set up by the platform code */
@@ -26,6 +27,8 @@ void __iomem *twd_base;
static unsigned long twd_timer_rate;
+static struct clock_event_device __percpu **twd_evt;
+
static void twd_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
@@ -80,6 +83,12 @@ int twd_timer_ack(void)
return 0;
}
+void twd_timer_stop(struct clock_event_device *clk)
+{
+ twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+ disable_percpu_irq(clk->irq);
+}
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -119,11 +128,43 @@ static void __cpuinit twd_calibrate_rate(void)
}
}
+static irqreturn_t twd_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+ if (twd_timer_ack()) {
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
+ struct clock_event_device **this_cpu_clk;
+
+ if (!twd_evt) {
+ int err;
+
+ twd_evt = alloc_percpu(struct clock_event_device *);
+ if (!twd_evt) {
+ pr_err("twd: can't allocate memory\n");
+ return;
+ }
+
+ err = request_percpu_irq(clk->irq, twd_handler,
+ "twd", twd_evt);
+ if (err) {
+ pr_err("twd: can't register interrupt %d (%d)\n",
+ clk->irq, err);
+ return;
+ }
+ }
+
twd_calibrate_rate();
clk->name = "local_timer";
@@ -137,8 +178,10 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ this_cpu_clk = __this_cpu_ptr(twd_evt);
+ *this_cpu_clk = clk;
+
clockevents_register_device(clk);
- /* Make sure our local interrupt controller has this enabled */
- gic_enable_ppi(clk->irq);
+ enable_percpu_irq(clk->irq);
}
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd8686..b3a0016 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -402,11 +402,6 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
return 0;
}
-int local_timer_ack(void)
-{
- return 0;
-}
-
#endif /* CONFIG_LOCAL_TIMERS */
static void __init exynos4_timer_resources(void)
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 63621f1..701d5e6 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -71,12 +71,16 @@ enum timer_location {
struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
- struct irqaction irq;
+ unsigned int irq;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
void __iomem *global_counter;
void __iomem *local_counter;
+ union {
+ struct clock_event_device *evt;
+ struct clock_event_device __percpu **percpu_evt;
+ };
};
enum {
@@ -87,13 +91,10 @@ enum {
static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = dev_id;
- if (smp_processor_id() != 0)
- evt = local_clock_event;
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
if (evt->event_handler == NULL)
return IRQ_HANDLED;
evt->event_handler(evt);
@@ -171,13 +172,7 @@ static struct msm_clock msm_clocks[] = {
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[0].clockevent,
- .irq = INT_GP_TIMER_EXP
- },
+ .irq = INT_GP_TIMER_EXP,
.freq = GPT_HZ,
},
[MSM_CLOCK_DGT] = {
@@ -196,13 +191,7 @@ static struct msm_clock msm_clocks[] = {
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "dg_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[1].clockevent,
- .irq = INT_DEBUG_TIMER_EXP
- },
+ .irq = INT_DEBUG_TIMER_EXP,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
.shift = MSM_DGT_SHIFT,
}
@@ -261,10 +250,30 @@ static void __init msm_timer_init(void)
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
- res = setup_irq(clock->irq.irq, &clock->irq);
+ ce->irq = clock->irq;
+ if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ clock->percpu_evt = alloc_percpu(struct clock_event_device *);
+ if (!clock->percpu_evt) {
+ pr_err("msm_timer_init: memory allocation "
+ "failed for %s\n", ce->name);
+ continue;
+ }
+
+ *__this_cpu_ptr(clock->percpu_evt) = ce;
+ res = request_percpu_irq(ce->irq, msm_timer_interrupt,
+ ce->name, clock->percpu_evt);
+ if (!res)
+ enable_percpu_irq(ce->irq);
+ } else {
+ clock->evt = ce;
+ res = request_irq(ce->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ ce->name, &clock->evt);
+ }
+
if (res)
- printk(KERN_ERR "msm_timer_init: setup_irq "
- "failed for %s\n", cs->name);
+ pr_err("msm_timer_init: request_irq failed for %s\n",
+ ce->name);
clockevents_register_device(ce);
}
@@ -273,6 +282,7 @@ static void __init msm_timer_init(void)
#ifdef CONFIG_SMP
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+ static bool local_timer_inited;
struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
/* Use existing clock_event for cpu 0 */
@@ -281,12 +291,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- if (!local_clock_event) {
+ if (!local_timer_inited) {
writel(0, clock->regbase + TIMER_ENABLE);
writel(0, clock->regbase + TIMER_CLEAR);
writel(~0, clock->regbase + TIMER_MATCH_VAL);
+ local_timer_inited = true;
}
- evt->irq = clock->irq.irq;
+ evt->irq = clock->irq;
evt->name = "local_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT;
evt->rating = clock->clockevent.rating;
@@ -298,17 +309,17 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
- local_clock_event = evt;
-
- gic_enable_ppi(clock->irq.irq);
+ *__this_cpu_ptr(clock->percpu_evt) = evt;
+ enable_percpu_irq(evt->irq);
clockevents_register_device(evt);
return 0;
}
-inline int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 1;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
}
#endif
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread* [PATCH v3 3/3] ARM: gic, local timers: use the request_percpu_irq() interface
@ 2011-09-23 16:03 ` Marc Zyngier
0 siblings, 0 replies; 19+ messages in thread
From: Marc Zyngier @ 2011-09-23 16:03 UTC (permalink / raw)
To: linux-arm-kernel
This patch remove the hardcoded link between local timers and PPIs,
and convert the PPI users (TWD and MSM timers) to the new *_percpu_irq
interface. Also some collateral cleanup (local_timer_ack() is gone,
and the interrupt handler is strictly private to each driver).
PPIs are now useable for more than just the local timers.
Cc: David Brown <davidb@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/common/gic.c | 52 --------------------------
arch/arm/include/asm/hardware/gic.h | 1 -
arch/arm/include/asm/localtimer.h | 17 ++++-----
arch/arm/include/asm/smp_twd.h | 2 +-
arch/arm/kernel/smp.c | 16 +--------
arch/arm/kernel/smp_twd.c | 47 +++++++++++++++++++++++-
arch/arm/mach-exynos4/mct.c | 5 ---
arch/arm/mach-msm/timer.c | 69 ++++++++++++++++++++---------------
8 files changed, 94 insertions(+), 115 deletions(-)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 9b83077..a3f335c 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -35,7 +35,6 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
-#include <asm/localtimer.h>
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -259,32 +258,6 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
irq_set_chained_handler(irq, gic_handle_cascade_irq);
}
-#ifdef CONFIG_LOCAL_TIMERS
-#define gic_ppi_handler percpu_timer_handler
-#else
-static irqreturn_t gic_ppi_handler(int irq, void *dev_id)
-{
- return IRQ_NONE;
-}
-#endif
-
-#define PPI_IRQACT(nr) \
- { \
- .handler = gic_ppi_handler, \
- .flags = IRQF_PERCPU | IRQF_TIMER, \
- .irq = nr, \
- .name = "PPI-" # nr, \
- }
-
-static struct irqaction ppi_irqaction_template[16] __initdata = {
- PPI_IRQACT(0), PPI_IRQACT(1), PPI_IRQACT(2), PPI_IRQACT(3),
- PPI_IRQACT(4), PPI_IRQACT(5), PPI_IRQACT(6), PPI_IRQACT(7),
- PPI_IRQACT(8), PPI_IRQACT(9), PPI_IRQACT(10), PPI_IRQACT(11),
- PPI_IRQACT(12), PPI_IRQACT(13), PPI_IRQACT(14), PPI_IRQACT(15),
-};
-
-static struct irqaction *ppi_irqaction;
-
static void __init gic_dist_init(struct gic_chip_data *gic,
unsigned int irq_start)
{
@@ -320,16 +293,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
if (gic == &gic_data[0]) {
nrppis = 16 - (irq_start & 15);
ppi_base = gic->irq_offset + 32 - nrppis;
-
- ppi_irqaction = kmemdup(&ppi_irqaction_template[16 - nrppis],
- sizeof(*ppi_irqaction) * nrppis,
- GFP_KERNEL);
-
- if (nrppis && !ppi_irqaction) {
- pr_err("GIC: Can't allocate PPI memory");
- nrppis = 0;
- ppi_base = 0;
- }
}
pr_info("Configuring GIC with %d sources (%d PPIs)\n",
@@ -372,17 +335,12 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
*/
for (i = 0; i < nrppis; i++) {
int ppi = i + ppi_base;
- int err;
irq_set_percpu_devid(ppi);
irq_set_chip_and_handler(ppi, &gic_chip,
handle_percpu_devid_irq);
irq_set_chip_data(ppi, gic);
set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
-
- err = setup_percpu_irq(ppi, &ppi_irqaction[i]);
- if (err)
- pr_err("GIC: can't setup PPI%d (%d)\n", ppi, err);
}
for (i = irq_start + nrppis; i < irq_limit; i++) {
@@ -443,16 +401,6 @@ void __cpuinit gic_secondary_init(unsigned int gic_nr)
gic_cpu_init(&gic_data[gic_nr]);
}
-void __cpuinit gic_enable_ppi(unsigned int irq)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- irq_set_status_flags(irq, IRQ_NOPROBE);
- gic_unmask_irq(irq_get_irq_data(irq));
- local_irq_restore(flags);
-}
-
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..2dadd50 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -40,7 +40,6 @@ void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-void gic_enable_ppi(unsigned int);
struct gic_chip_data {
unsigned int irq_offset;
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index e3663f7..f5e1cec 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -19,27 +19,20 @@ struct clock_event_device;
*/
void percpu_timer_setup(void);
-/*
- * Per-cpu timer IRQ handler
- */
-irqreturn_t percpu_timer_handler(int irq, void *dev_id);
-
-
#ifdef CONFIG_LOCAL_TIMERS
#ifdef CONFIG_HAVE_ARM_TWD
#include "smp_twd.h"
-#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop(c) twd_timer_stop((c))
#else
/*
- * Platform provides this to acknowledge a local timer IRQ.
- * Returns true if the local timer IRQ is to be processed.
+ * Stop the local timer
*/
-int local_timer_ack(void);
+void local_timer_stop(struct clock_event_device *);
#endif
@@ -54,6 +47,10 @@ static inline int local_timer_setup(struct clock_event_device *evt)
{
return -ENXIO;
}
+
+static inline void local_timer_stop(struct clock_event_device *evt)
+{
+}
#endif
#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index fed9981..ef9ffba 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,7 @@ struct clock_event_device;
extern void __iomem *twd_base;
-int twd_timer_ack(void);
void twd_timer_setup(struct clock_event_device *);
+void twd_timer_stop(struct clock_event_device *);
#endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8f73342..fcca40b 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -520,20 +520,6 @@ static void ipi_timer(void)
irq_exit();
}
-#ifdef CONFIG_LOCAL_TIMERS
-irqreturn_t percpu_timer_handler(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-
- if (local_timer_ack()) {
- evt->event_handler(evt);
- return IRQ_HANDLED;
- }
-
- return IRQ_NONE;
-}
-#endif
-
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
static void smp_timer_broadcast(const struct cpumask *mask)
{
@@ -584,7 +570,7 @@ static void percpu_timer_stop(void)
unsigned int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ local_timer_stop(evt);
}
#endif
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 01c1862..566c0fe 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
#include <asm/hardware/gic.h>
/* set up by the platform code */
@@ -26,6 +27,8 @@ void __iomem *twd_base;
static unsigned long twd_timer_rate;
+static struct clock_event_device __percpu **twd_evt;
+
static void twd_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
@@ -80,6 +83,12 @@ int twd_timer_ack(void)
return 0;
}
+void twd_timer_stop(struct clock_event_device *clk)
+{
+ twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+ disable_percpu_irq(clk->irq);
+}
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -119,11 +128,43 @@ static void __cpuinit twd_calibrate_rate(void)
}
}
+static irqreturn_t twd_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+ if (twd_timer_ack()) {
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
+ struct clock_event_device **this_cpu_clk;
+
+ if (!twd_evt) {
+ int err;
+
+ twd_evt = alloc_percpu(struct clock_event_device *);
+ if (!twd_evt) {
+ pr_err("twd: can't allocate memory\n");
+ return;
+ }
+
+ err = request_percpu_irq(clk->irq, twd_handler,
+ "twd", twd_evt);
+ if (err) {
+ pr_err("twd: can't register interrupt %d (%d)\n",
+ clk->irq, err);
+ return;
+ }
+ }
+
twd_calibrate_rate();
clk->name = "local_timer";
@@ -137,8 +178,10 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ this_cpu_clk = __this_cpu_ptr(twd_evt);
+ *this_cpu_clk = clk;
+
clockevents_register_device(clk);
- /* Make sure our local interrupt controller has this enabled */
- gic_enable_ppi(clk->irq);
+ enable_percpu_irq(clk->irq);
}
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index ddd8686..b3a0016 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -402,11 +402,6 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
return 0;
}
-int local_timer_ack(void)
-{
- return 0;
-}
-
#endif /* CONFIG_LOCAL_TIMERS */
static void __init exynos4_timer_resources(void)
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 63621f1..701d5e6 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -71,12 +71,16 @@ enum timer_location {
struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
- struct irqaction irq;
+ unsigned int irq;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
void __iomem *global_counter;
void __iomem *local_counter;
+ union {
+ struct clock_event_device *evt;
+ struct clock_event_device __percpu **percpu_evt;
+ };
};
enum {
@@ -87,13 +91,10 @@ enum {
static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = dev_id;
- if (smp_processor_id() != 0)
- evt = local_clock_event;
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
if (evt->event_handler == NULL)
return IRQ_HANDLED;
evt->event_handler(evt);
@@ -171,13 +172,7 @@ static struct msm_clock msm_clocks[] = {
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[0].clockevent,
- .irq = INT_GP_TIMER_EXP
- },
+ .irq = INT_GP_TIMER_EXP,
.freq = GPT_HZ,
},
[MSM_CLOCK_DGT] = {
@@ -196,13 +191,7 @@ static struct msm_clock msm_clocks[] = {
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "dg_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[1].clockevent,
- .irq = INT_DEBUG_TIMER_EXP
- },
+ .irq = INT_DEBUG_TIMER_EXP,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
.shift = MSM_DGT_SHIFT,
}
@@ -261,10 +250,30 @@ static void __init msm_timer_init(void)
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
- res = setup_irq(clock->irq.irq, &clock->irq);
+ ce->irq = clock->irq;
+ if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ clock->percpu_evt = alloc_percpu(struct clock_event_device *);
+ if (!clock->percpu_evt) {
+ pr_err("msm_timer_init: memory allocation "
+ "failed for %s\n", ce->name);
+ continue;
+ }
+
+ *__this_cpu_ptr(clock->percpu_evt) = ce;
+ res = request_percpu_irq(ce->irq, msm_timer_interrupt,
+ ce->name, clock->percpu_evt);
+ if (!res)
+ enable_percpu_irq(ce->irq);
+ } else {
+ clock->evt = ce;
+ res = request_irq(ce->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ ce->name, &clock->evt);
+ }
+
if (res)
- printk(KERN_ERR "msm_timer_init: setup_irq "
- "failed for %s\n", cs->name);
+ pr_err("msm_timer_init: request_irq failed for %s\n",
+ ce->name);
clockevents_register_device(ce);
}
@@ -273,6 +282,7 @@ static void __init msm_timer_init(void)
#ifdef CONFIG_SMP
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+ static bool local_timer_inited;
struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
/* Use existing clock_event for cpu 0 */
@@ -281,12 +291,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- if (!local_clock_event) {
+ if (!local_timer_inited) {
writel(0, clock->regbase + TIMER_ENABLE);
writel(0, clock->regbase + TIMER_CLEAR);
writel(~0, clock->regbase + TIMER_MATCH_VAL);
+ local_timer_inited = true;
}
- evt->irq = clock->irq.irq;
+ evt->irq = clock->irq;
evt->name = "local_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT;
evt->rating = clock->clockevent.rating;
@@ -298,17 +309,17 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
- local_clock_event = evt;
-
- gic_enable_ppi(clock->irq.irq);
+ *__this_cpu_ptr(clock->percpu_evt) = evt;
+ enable_percpu_irq(evt->irq);
clockevents_register_device(evt);
return 0;
}
-inline int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 1;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
}
#endif
--
1.7.0.4
^ permalink raw reply related [flat|nested] 19+ messages in thread
* Re: [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
2011-09-23 16:03 ` Marc Zyngier
@ 2011-09-26 20:18 ` David Brown
-1 siblings, 0 replies; 19+ messages in thread
From: David Brown @ 2011-09-26 20:18 UTC (permalink / raw)
To: Marc Zyngier
Cc: linux-arm-kernel, linux-kernel, Bryan Huntsman, David Brown,
Kukjin Kim, Magnus Damm, Paul Mundt, Thomas Gleixner,
Tony Lindgren
On Fri, Sep 23, 2011 at 05:03:05PM +0100, Marc Zyngier wrote:
> Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
> OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
>
> From v2:
> - Fixed !GENERIC_HARDIRQS build
> - Fixed request_percpu_irq documentation
>
> From v1:
> - General tidy-up after Thomas' review. I've kept the config option
> for the time being until we can sort out the anonymous union
> problem.
>
> Marc Zyngier (3):
> genirq: add support for per-cpu dev_id interrupts
> ARM: gic: consolidate PPI handling
> ARM: gic, local timers: use the request_percpu_irq() interface
I've tested this on an MSM8660 based off of next-20110926.
Tested-by: David Brown <davidb@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
@ 2011-09-26 20:18 ` David Brown
0 siblings, 0 replies; 19+ messages in thread
From: David Brown @ 2011-09-26 20:18 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 23, 2011 at 05:03:05PM +0100, Marc Zyngier wrote:
> Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
> OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
>
> From v2:
> - Fixed !GENERIC_HARDIRQS build
> - Fixed request_percpu_irq documentation
>
> From v1:
> - General tidy-up after Thomas' review. I've kept the config option
> for the time being until we can sort out the anonymous union
> problem.
>
> Marc Zyngier (3):
> genirq: add support for per-cpu dev_id interrupts
> ARM: gic: consolidate PPI handling
> ARM: gic, local timers: use the request_percpu_irq() interface
I've tested this on an MSM8660 based off of next-20110926.
Tested-by: David Brown <davidb@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
2011-09-26 20:18 ` David Brown
@ 2011-09-27 0:11 ` David Brown
-1 siblings, 0 replies; 19+ messages in thread
From: David Brown @ 2011-09-27 0:11 UTC (permalink / raw)
To: David Brown
Cc: Marc Zyngier, Kukjin Kim, Tony Lindgren, Magnus Damm,
linux-kernel, Bryan Huntsman, Paul Mundt, Thomas Gleixner,
linux-arm-kernel
On Mon, Sep 26, 2011 at 01:18:36PM -0700, David Brown wrote:
> On Fri, Sep 23, 2011 at 05:03:05PM +0100, Marc Zyngier wrote:
>
> > Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
> > OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
> >
> > From v2:
> > - Fixed !GENERIC_HARDIRQS build
> > - Fixed request_percpu_irq documentation
> >
> > From v1:
> > - General tidy-up after Thomas' review. I've kept the config option
> > for the time being until we can sort out the anonymous union
> > problem.
> >
> > Marc Zyngier (3):
> > genirq: add support for per-cpu dev_id interrupts
> > ARM: gic: consolidate PPI handling
> > ARM: gic, local timers: use the request_percpu_irq() interface
>
> I've tested this on an MSM8660 based off of next-20110926.
>
> Tested-by: David Brown <davidb@codeaurora.org>
> Acked-by: David Brown <davidb@codeaurora.org>
Also tested on MSM8250.
David
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
@ 2011-09-27 0:11 ` David Brown
0 siblings, 0 replies; 19+ messages in thread
From: David Brown @ 2011-09-27 0:11 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Sep 26, 2011 at 01:18:36PM -0700, David Brown wrote:
> On Fri, Sep 23, 2011 at 05:03:05PM +0100, Marc Zyngier wrote:
>
> > Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
> > OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
> >
> > From v2:
> > - Fixed !GENERIC_HARDIRQS build
> > - Fixed request_percpu_irq documentation
> >
> > From v1:
> > - General tidy-up after Thomas' review. I've kept the config option
> > for the time being until we can sort out the anonymous union
> > problem.
> >
> > Marc Zyngier (3):
> > genirq: add support for per-cpu dev_id interrupts
> > ARM: gic: consolidate PPI handling
> > ARM: gic, local timers: use the request_percpu_irq() interface
>
> I've tested this on an MSM8660 based off of next-20110926.
>
> Tested-by: David Brown <davidb@codeaurora.org>
> Acked-by: David Brown <davidb@codeaurora.org>
Also tested on MSM8250.
David
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
2011-09-23 16:03 ` Marc Zyngier
@ 2011-09-27 10:21 ` Shawn Guo
-1 siblings, 0 replies; 19+ messages in thread
From: Shawn Guo @ 2011-09-27 10:21 UTC (permalink / raw)
To: Marc Zyngier
Cc: linux-arm-kernel, linux-kernel, Bryan Huntsman, David Brown,
Kukjin Kim, Magnus Damm, Paul Mundt, Thomas Gleixner,
Tony Lindgren
On Fri, Sep 23, 2011 at 05:03:05PM +0100, Marc Zyngier wrote:
> The current GIC per-cpu interrupts (aka PPIs) suffer from a number of
> problems:
>
> - They use a completely separate scheme to handle the interrupts,
> mostly because the PPI concept doesn't really match the kernel view
> of an interrupt.
> - PPIs can only be used by the timer code, unless we add more low-level
> assembly code.
> - The local timer code can only be used by devices generating PPIs,
> and not SPIs.
> - At least one platform (msm) has started implementing its own
> alternative scheme.
> - Some low-level code gets duplicated, as usual...
>
> The proposed solution is to handle the PPIs using the same path as
> SPIs. A new core API is added to deal with per-cpu interrupts in a
> less awkward way. The local timer code is updated to reflect these
> changes.
>
> The core API changes are based on an initial idea by Thomas Gleixner.
>
> Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
> OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
>
> From v2:
> - Fixed !GENERIC_HARDIRQS build
> - Fixed request_percpu_irq documentation
>
> From v1:
> - General tidy-up after Thomas' review. I've kept the config option
> for the time being until we can sort out the anonymous union
> problem.
>
> Marc Zyngier (3):
> genirq: add support for per-cpu dev_id interrupts
> ARM: gic: consolidate PPI handling
> ARM: gic, local timers: use the request_percpu_irq() interface
>
On imx6q:
Tested-by: Shawn Guo <shawn.guo@linaro.org>
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 19+ messages in thread
* [PATCH v3 0/3] genirq: handling GIC per-cpu interrupts
@ 2011-09-27 10:21 ` Shawn Guo
0 siblings, 0 replies; 19+ messages in thread
From: Shawn Guo @ 2011-09-27 10:21 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 23, 2011 at 05:03:05PM +0100, Marc Zyngier wrote:
> The current GIC per-cpu interrupts (aka PPIs) suffer from a number of
> problems:
>
> - They use a completely separate scheme to handle the interrupts,
> mostly because the PPI concept doesn't really match the kernel view
> of an interrupt.
> - PPIs can only be used by the timer code, unless we add more low-level
> assembly code.
> - The local timer code can only be used by devices generating PPIs,
> and not SPIs.
> - At least one platform (msm) has started implementing its own
> alternative scheme.
> - Some low-level code gets duplicated, as usual...
>
> The proposed solution is to handle the PPIs using the same path as
> SPIs. A new core API is added to deal with per-cpu interrupts in a
> less awkward way. The local timer code is updated to reflect these
> changes.
>
> The core API changes are based on an initial idea by Thomas Gleixner.
>
> Tested on ARM Versatile Express (Cortex A15), ARM RealView PB11MP,
> OMAP4 (Panda) and Tegra (Harmony). Patch series against next-20110923.
>
> From v2:
> - Fixed !GENERIC_HARDIRQS build
> - Fixed request_percpu_irq documentation
>
> From v1:
> - General tidy-up after Thomas' review. I've kept the config option
> for the time being until we can sort out the anonymous union
> problem.
>
> Marc Zyngier (3):
> genirq: add support for per-cpu dev_id interrupts
> ARM: gic: consolidate PPI handling
> ARM: gic, local timers: use the request_percpu_irq() interface
>
On imx6q:
Tested-by: Shawn Guo <shawn.guo@linaro.org>
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 19+ messages in thread