Re: OMAP34xx

[Rex Feany <rfeany@laeos.net>]

Thus spake Tony Lindgren (tony@atomide.com):

> Please everybody using omaps with mainline give a test for the
> merge of the various fixes planned. I've done a branch with
> v3.3-rc3 + Russell's fixes + Paul's serial port fixes + fixes
> that I've queued up.
> 
> If you still see problems with compiling, booting, or slow serial
> port, please post the issues to linux-omap and LAKML lists
> immediately.

With the testing branch, my serial port is still very slow. 
The console is set to 115200, dmesg takes almost a minute to print out.
I'm testing on a beagleboard-xm, which has the DM3730.
(if I change omap2_pm_idle() to never call omap_sram_idle() things improve *a lot*).

config: http://tonya.fnordsoft.com/omap-testing/config
dmesg: http://tonya.fnordsoft.com/omap-testing/testing-dmesg

I also get these warnings when compiling:

  CC      arch/arm/mach-omap2/usb-host.o
arch/arm/mach-omap2/usb-host.c: In function 'usbhs_init':
arch/arm/mach-omap2/usb-host.c:528: warning: assignment from incompatible pointer type

  CC      kernel/trace/trace.o
kernel/trace/trace.c: In function 'tracing_mark_write':
kernel/trace/trace.c:3697: warning: 'page2' may be used uninitialized in this function

  CC      drivers/usb/host/ehci-hcd.o
drivers/usb/host/ehci-hub.c:1079: warning: 'ehci_relinquish_port' defined but not used
drivers/usb/host/ehci-hub.c:1088: warning: 'ehci_port_handed_over' defined but not used

with this gcc:
{rfeany@etalinux:~}(0)$ arm-angstrom-linux-gnueabi-gcc --version
arm-angstrom-linux-gnueabi-gcc (GCC) 4.3.3

take care!
/rex.