Re: OMAP34xx

[Kevin Hilman <khilman@ti.com>]

Rex Feany <rfeany@laeos.net> writes:

> Thus spake Tony Lindgren (tony@atomide.com):
>
>> Please everybody using omaps with mainline give a test for the
>> merge of the various fixes planned. I've done a branch with
>> v3.3-rc3 + Russell's fixes + Paul's serial port fixes + fixes
>> that I've queued up.
>> 
>> If you still see problems with compiling, booting, or slow serial
>> port, please post the issues to linux-omap and LAKML lists
>> immediately.
>
> With the testing branch, my serial port is still very slow. 
> The console is set to 115200, dmesg takes almost a minute to print out.
> I'm testing on a beagleboard-xm, which has the DM3730.
> (if I change omap2_pm_idle() to never call omap_sram_idle() things improve *a lot*).
>
> config: http://tonya.fnordsoft.com/omap-testing/config
> dmesg: http://tonya.fnordsoft.com/omap-testing/testing-dmesg

Looking at your config, I see quite a few changes from the default
omap2plus_defconfig.

Also, based on your config and your dmesg output, you're booting a
3.3-rc1 kernel.

Tony's branch is based on -rc3, so I'm a bit confused about what you're
testing.

Can you double check that you're building and booting using Tony's -rc3
based branch?

Also, can you do a test using omap2plus_defconfig?

If it works with omap2plus_defconfig, it would be a great help if you
can slowly enable/diable the config options you care about until it
breaks so we can isolate the problem you're seeing.

Thanks,

Kevin