[PATCH] rtc/spear: Add Device Tree probing capability

[PATCH] rtc/spear: Add Device Tree probing capability

[Viresh Kumar]

SPEAr platforms now support DT and so must convert all drivers support DT. This
patch adds DT probing support for rtc and updates its documentation too.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 Documentation/devicetree/bindings/rtc/spear-rtc.txt |   18 ++++++++++++++++++
 drivers/rtc/rtc-spear.c                             |   10 ++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/spear-rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
new file mode 100644
index 0000000..928410f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -0,0 +1,18 @@
+* SPEAr RTC
+
+Required properties:
+- compatible : "st,spear-rtc"
+- reg : Address range of the rtc registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the rtc interrupt number
+
+Example:
+
+	rtc@fc000000 {
+		compatible = "st,spear-rtc";
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+	};
+
diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c
index e38da0d..4a12fe5 100644
--- a/drivers/rtc/rtc-spear.c
+++ b/drivers/rtc/rtc-spear.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
@@ -519,6 +520,14 @@ static void spear_rtc_shutdown(struct platform_device *pdev)
 	clk_disable(config->clk);
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id spear_rtc_id_table[] = {
+	{ .compatible = "st,spear-rtc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
+#endif
+
 static struct platform_driver spear_rtc_driver = {
 	.probe = spear_rtc_probe,
 	.remove = __devexit_p(spear_rtc_remove),
@@ -527,6 +536,7 @@ static struct platform_driver spear_rtc_driver = {
 	.shutdown = spear_rtc_shutdown,
 	.driver = {
 		.name = "rtc-spear",
+		.of_match_table = of_match_ptr(spear_rtc_id_table),
 	},
 };
 
-- 
1.7.10.rc2.10.gb47606

[PATCH] rtc/spear: Add Device Tree probing capability

[Viresh Kumar]

SPEAr platforms now support DT and so must convert all drivers support DT. This
patch adds DT probing support for rtc and updates its documentation too.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
 Documentation/devicetree/bindings/rtc/spear-rtc.txt |   18 ++++++++++++++++++
 drivers/rtc/rtc-spear.c                             |   10 ++++++++++
 2 files changed, 28 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/spear-rtc.txt

diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
new file mode 100644
index 0000000..928410f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
@@ -0,0 +1,18 @@
+* SPEAr RTC
+
+Required properties:
+- compatible : "st,spear-rtc"
+- reg : Address range of the rtc registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the rtc interrupt number
+
+Example:
+
+	rtc@fc000000 {
+		compatible = "st,spear-rtc";
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+	};
+
diff --git a/drivers/rtc/rtc-spear.c b/drivers/rtc/rtc-spear.c
index e38da0d..4a12fe5 100644
--- a/drivers/rtc/rtc-spear.c
+++ b/drivers/rtc/rtc-spear.c
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/slab.h>
@@ -519,6 +520,14 @@ static void spear_rtc_shutdown(struct platform_device *pdev)
 	clk_disable(config->clk);
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id spear_rtc_id_table[] = {
+	{ .compatible = "st,spear-rtc" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, spear_rtc_id_table);
+#endif
+
 static struct platform_driver spear_rtc_driver = {
 	.probe = spear_rtc_probe,
 	.remove = __devexit_p(spear_rtc_remove),
@@ -527,6 +536,7 @@ static struct platform_driver spear_rtc_driver = {
 	.shutdown = spear_rtc_shutdown,
 	.driver = {
 		.name = "rtc-spear",
+		.of_match_table = of_match_ptr(spear_rtc_id_table),
 	},
 };
 
-- 
1.7.10.rc2.10.gb47606

Re: [PATCH] rtc/spear: Add Device Tree probing capability

[Stefan Roese]

On Monday 26 March 2012 11:54:22 Viresh Kumar wrote:
> SPEAr platforms now support DT and so must convert all drivers support DT.
> This patch adds DT probing support for rtc and updates its documentation
> too.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
> ---
>  Documentation/devicetree/bindings/rtc/spear-rtc.txt |   18
> ++++++++++++++++++ drivers/rtc/rtc-spear.c                             |  
> 10 ++++++++++ 2 files changed, 28 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/spear-rtc.txt
> 
> diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
> b/Documentation/devicetree/bindings/rtc/spear-rtc.txt new file mode 100644
> index 0000000..928410f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
> @@ -0,0 +1,18 @@
> +* SPEAr RTC
> +
> +Required properties:
> +- compatible : "st,spear-rtc"
> +- reg : Address range of the rtc registers
> +- interrupt-parent: Should be the phandle for the interrupt controller
> +  that services interrupts for this device
> +- interrupt: Should contain the rtc interrupt number
> +
> +Example:
> +
> +	rtc@fc000000 {
> +		compatible = "st,spear-rtc";

With Rob's comments in mind, wouldn't it be better to use a more specific 
compatible property? Should we stick with "st,spear600-rtc"? Or use "st-
spear300-rtc" as "oldest" SoC variant?

Thanks,
Stefan

Re: [PATCH] rtc/spear: Add Device Tree probing capability

[Viresh Kumar]

On 3/26/2012 5:02 PM, Stefan Roese wrote:
>> > +	rtc@fc000000 {
>> > +		compatible = "st,spear-rtc";
> With Rob's comments in mind, wouldn't it be better to use a more specific 
> compatible property? Should we stick with "st,spear600-rtc"? Or use "st-
> spear300-rtc" as "oldest" SoC variant?

Can name it spear600-rtc then.

-- 
viresh

Re: [PATCH] rtc/spear: Add Device Tree probing capability

[Viresh Kumar]

On 3/26/2012 5:02 PM, Stefan Roese wrote:
>> > +	rtc@fc000000 {
>> > +		compatible = "st,spear-rtc";
> With Rob's comments in mind, wouldn't it be better to use a more specific 
> compatible property? Should we stick with "st,spear600-rtc"? Or use "st-
> spear300-rtc" as "oldest" SoC variant?

Can name it spear600-rtc then.

-- 
viresh

Re: [PATCH] rtc/spear: Add Device Tree probing capability

[Arnd Bergmann]

On Monday 26 March 2012, Stefan Roese wrote:
> > diff --git a/Documentation/devicetree/bindings/rtc/spear-rtc.txt
> > b/Documentation/devicetree/bindings/rtc/spear-rtc.txt new file mode 100644
> > index 0000000..928410f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/rtc/spear-rtc.txt
> > @@ -0,0 +1,18 @@
> > +* SPEAr RTC
> > +
> > +Required properties:
> > +- compatible : "st,spear-rtc"
> > +- reg : Address range of the rtc registers
> > +- interrupt-parent: Should be the phandle for the interrupt controller
> > +  that services interrupts for this device
> > +- interrupt: Should contain the rtc interrupt number
> > +
> > +Example:
> > +
> > +     rtc@fc000000 {
> > +             compatible = "st,spear-rtc";
> 
> With Rob's comments in mind, wouldn't it be better to use a more specific 
> compatible property? Should we stick with "st,spear600-rtc"? Or use "st-
> spear300-rtc" as "oldest" SoC variant?

I wouldn't mind if you list all three, or at least spear600 as the actual
chip and spear300 as the one that introduced the device. Of course, if the
device itself is licensed from some other vendor or was used in a prior product,
I would list that one.

	Arnd