* [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd
@ 2012-04-20 17:10 ` Fabio Estevam
0 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2012-04-20 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Fabio Estevam, devicetree-discuss, shawn.guo, kernel, rob.herring
Add basic support for imx6q-sabresd.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Added entry into Documentation
- Added entry in arch/arm/mach-imx/Makefile.boot
- Fixed ethernet
- Dropped SDHC for now
Documentation/devicetree/bindings/arm/fsl.txt | 4 ++
arch/arm/boot/dts/imx6q-sabresd.dts | 41 +++++++++++++++++++++++++
arch/arm/mach-imx/Makefile.boot | 3 +-
arch/arm/mach-imx/mach-imx6q.c | 1 +
4 files changed, 48 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-sabresd.dts
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index fecb580..0fc2da7 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -33,6 +33,10 @@ i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+i.MX6 Quad SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
Generic i.MX boards
-------------------
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
new file mode 100644
index 0000000..368d2d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6Q SABRE Smart Device Board";
+ compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+
+ aips-bus@02000000 { /* AIPS1 */
+ spba-bus@02000000 {
+ uart1: uart@02020000 {
+ status = "okay";
+ };
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ enet@02188000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3851d8a..64eb671 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index da6c1d9..512c18d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -132,6 +132,7 @@ static struct sys_timer imx6q_timer = {
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
+ "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd
@ 2012-04-20 17:10 ` Fabio Estevam
0 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2012-04-20 17:10 UTC (permalink / raw)
To: linux-arm-kernel
Add basic support for imx6q-sabresd.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Added entry into Documentation
- Added entry in arch/arm/mach-imx/Makefile.boot
- Fixed ethernet
- Dropped SDHC for now
Documentation/devicetree/bindings/arm/fsl.txt | 4 ++
arch/arm/boot/dts/imx6q-sabresd.dts | 41 +++++++++++++++++++++++++
arch/arm/mach-imx/Makefile.boot | 3 +-
arch/arm/mach-imx/mach-imx6q.c | 1 +
4 files changed, 48 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6q-sabresd.dts
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index fecb580..0fc2da7 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -33,6 +33,10 @@ i.MX6 Quad SABRE Lite Board
Required root node properties:
- compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
+i.MX6 Quad SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
Generic i.MX boards
-------------------
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
new file mode 100644
index 0000000..368d2d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6Q SABRE Smart Device Board";
+ compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+
+ aips-bus at 02000000 { /* AIPS1 */
+ spba-bus at 02000000 {
+ uart1: uart at 02020000 {
+ status = "okay";
+ };
+ };
+ };
+
+ aips-bus at 02100000 { /* AIPS2 */
+ enet at 02188000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3851d8a..64eb671 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index da6c1d9..512c18d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -132,6 +132,7 @@ static struct sys_timer imx6q_timer = {
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
+ "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd
2012-04-20 17:10 ` Fabio Estevam
@ 2012-04-21 16:16 ` Shawn Guo
-1 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2012-04-21 16:16 UTC (permalink / raw)
To: Fabio Estevam
Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
On Fri, Apr 20, 2012 at 02:10:38PM -0300, Fabio Estevam wrote:
> Add basic support for imx6q-sabresd.
>
> Signed-off-by: Fabio Estevam <fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> ---
> Changes since v1:
>
> - Added entry into Documentation
> - Added entry in arch/arm/mach-imx/Makefile.boot
> - Fixed ethernet
> - Dropped SDHC for now
>
Instead of dropping SDHC, I would expect only drop vmmc-supply property
of the SDHC node, as SD still works without that. Also, I have seen at
least 2 SD slots on the board.
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd
@ 2012-04-21 16:16 ` Shawn Guo
0 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2012-04-21 16:16 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Apr 20, 2012 at 02:10:38PM -0300, Fabio Estevam wrote:
> Add basic support for imx6q-sabresd.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
>
> - Added entry into Documentation
> - Added entry in arch/arm/mach-imx/Makefile.boot
> - Fixed ethernet
> - Dropped SDHC for now
>
Instead of dropping SDHC, I would expect only drop vmmc-supply property
of the SDHC node, as SD still works without that. Also, I have seen at
least 2 SD slots on the board.
--
Regards,
Shawn
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-04-21 16:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-04-20 17:10 [PATCH v2] ARM: dts: Add basic support for imx6q-sabresd Fabio Estevam
2012-04-20 17:10 ` Fabio Estevam
[not found] ` <1334941838-18470-1-git-send-email-fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2012-04-21 16:16 ` Shawn Guo
2012-04-21 16:16 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.