From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot
Date: Thu, 03 May 2012 14:46:45 +0000 [thread overview]
Message-ID: <20120503144645.6390.62303.sendpatchset@w520> (raw)
mach-shmobile: Emma Mobile EV2 - first shot
[PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support
[PATCH 02/02] mach-shmobile: KZM9D board prototype support
This series adds experimental Emma Mobile EV2 support to
mach-shmobile. Yet another dual core Cortex-A9 SoC.
At this point only serial and timer is supported. Future work
includes GPIO, network device, SMP and DT support. If possible
it would be nice to use the common clocks on this platform.
To boot this on actual hardware you also need the following:
"[PATCH] serial8250-em: Emma Mobile UART driver V2"
"[PATCH] clocksource: em_sti: Emma Mobile STI driver"
Any reason to not put this in mach-shmobile?
Partially-signed-off-by: Magnus Damm <damm@opensource.se>
---
Does unfortunately not apply cleanly to the renesas
git repository, so we need to figure out how to let
this coexist with the new boards...
arch/arm/mach-shmobile/Kconfig | 9 +
arch/arm/mach-shmobile/Makefile | 2
arch/arm/mach-shmobile/board-kzm9d.c | 44 +++++
arch/arm/mach-shmobile/clock-emev2.c | 206 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 6
arch/arm/mach-shmobile/intc-emev2.c | 36 ++++
arch/arm/mach-shmobile/setup-emev2.c | 187 +++++++++++++++++++++++
7 files changed, 490 insertions(+)
WARNING: multiple messages have this Message-ID (diff)
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: horms@verge.net.au, linux@arm.linux.org.uk, arnd@arndb.de,
linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org,
rjw@sisk.pl, lethal@linux-sh.org, olof@lixom.net,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot
Date: Thu, 03 May 2012 23:46:45 +0900 [thread overview]
Message-ID: <20120503144645.6390.62303.sendpatchset@w520> (raw)
mach-shmobile: Emma Mobile EV2 - first shot
[PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support
[PATCH 02/02] mach-shmobile: KZM9D board prototype support
This series adds experimental Emma Mobile EV2 support to
mach-shmobile. Yet another dual core Cortex-A9 SoC.
At this point only serial and timer is supported. Future work
includes GPIO, network device, SMP and DT support. If possible
it would be nice to use the common clocks on this platform.
To boot this on actual hardware you also need the following:
"[PATCH] serial8250-em: Emma Mobile UART driver V2"
"[PATCH] clocksource: em_sti: Emma Mobile STI driver"
Any reason to not put this in mach-shmobile?
Partially-signed-off-by: Magnus Damm <damm@opensource.se>
---
Does unfortunately not apply cleanly to the renesas
git repository, so we need to figure out how to let
this coexist with the new boards...
arch/arm/mach-shmobile/Kconfig | 9 +
arch/arm/mach-shmobile/Makefile | 2
arch/arm/mach-shmobile/board-kzm9d.c | 44 +++++
arch/arm/mach-shmobile/clock-emev2.c | 206 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 6
arch/arm/mach-shmobile/intc-emev2.c | 36 ++++
arch/arm/mach-shmobile/setup-emev2.c | 187 +++++++++++++++++++++++
7 files changed, 490 insertions(+)
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot
Date: Thu, 03 May 2012 23:46:45 +0900 [thread overview]
Message-ID: <20120503144645.6390.62303.sendpatchset@w520> (raw)
mach-shmobile: Emma Mobile EV2 - first shot
[PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support
[PATCH 02/02] mach-shmobile: KZM9D board prototype support
This series adds experimental Emma Mobile EV2 support to
mach-shmobile. Yet another dual core Cortex-A9 SoC.
At this point only serial and timer is supported. Future work
includes GPIO, network device, SMP and DT support. If possible
it would be nice to use the common clocks on this platform.
To boot this on actual hardware you also need the following:
"[PATCH] serial8250-em: Emma Mobile UART driver V2"
"[PATCH] clocksource: em_sti: Emma Mobile STI driver"
Any reason to not put this in mach-shmobile?
Partially-signed-off-by: Magnus Damm <damm@opensource.se>
---
Does unfortunately not apply cleanly to the renesas
git repository, so we need to figure out how to let
this coexist with the new boards...
arch/arm/mach-shmobile/Kconfig | 9 +
arch/arm/mach-shmobile/Makefile | 2
arch/arm/mach-shmobile/board-kzm9d.c | 44 +++++
arch/arm/mach-shmobile/clock-emev2.c | 206 ++++++++++++++++++++++++++
arch/arm/mach-shmobile/include/mach/common.h | 6
arch/arm/mach-shmobile/intc-emev2.c | 36 ++++
arch/arm/mach-shmobile/setup-emev2.c | 187 +++++++++++++++++++++++
7 files changed, 490 insertions(+)
next reply other threads:[~2012-05-03 14:46 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-03 14:46 Magnus Damm [this message]
2012-05-03 14:46 ` [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot Magnus Damm
2012-05-03 14:46 ` Magnus Damm
2012-05-03 14:46 ` [PATCH 01/02] mach-shmobile: Emma Mobile EV2 SoC base support Magnus Damm
2012-05-03 14:46 ` Magnus Damm
2012-05-03 14:46 ` Magnus Damm
2012-05-04 13:07 ` Arnd Bergmann
2012-05-04 13:07 ` Arnd Bergmann
2012-05-04 13:07 ` Arnd Bergmann
2012-05-04 19:47 ` Arnd Bergmann
2012-05-04 19:47 ` Arnd Bergmann
2012-05-04 19:47 ` Arnd Bergmann
2012-05-08 16:56 ` Magnus Damm
2012-05-08 16:56 ` Magnus Damm
2012-05-08 16:56 ` Magnus Damm
2012-05-08 19:35 ` Arnd Bergmann
2012-05-08 19:35 ` Arnd Bergmann
2012-05-08 19:35 ` Arnd Bergmann
2012-05-03 14:47 ` [PATCH 02/02] mach-shmobile: KZM9D board prototype support Magnus Damm
2012-05-03 14:47 ` Magnus Damm
2012-05-03 14:47 ` Magnus Damm
2012-05-04 13:14 ` Arnd Bergmann
2012-05-04 13:14 ` Arnd Bergmann
2012-05-04 13:14 ` Arnd Bergmann
2012-05-03 19:23 ` [PATCH 00/02] mach-shmobile: Emma Mobile EV2 - first shot Rafael J. Wysocki
2012-05-03 19:23 ` Rafael J. Wysocki
2012-05-03 19:23 ` Rafael J. Wysocki
2012-05-04 19:57 ` Arnd Bergmann
2012-05-04 19:57 ` Arnd Bergmann
2012-05-04 19:57 ` Arnd Bergmann
2012-05-04 21:16 ` Rafael J. Wysocki
2012-05-04 21:16 ` Rafael J. Wysocki
2012-05-04 21:16 ` Rafael J. Wysocki
2012-05-05 7:22 ` Arnd Bergmann
2012-05-05 7:22 ` Arnd Bergmann
2012-05-05 7:22 ` Arnd Bergmann
2012-05-05 19:08 ` Rafael J. Wysocki
2012-05-05 19:08 ` Rafael J. Wysocki
2012-05-05 19:08 ` Rafael J. Wysocki
2012-05-05 19:21 ` Arnd Bergmann
2012-05-05 19:21 ` Arnd Bergmann
2012-05-05 19:21 ` Arnd Bergmann
2012-05-05 19:30 ` Rafael J. Wysocki
2012-05-05 19:30 ` Rafael J. Wysocki
2012-05-05 19:30 ` Rafael J. Wysocki
2012-05-05 19:50 ` Arnd Bergmann
2012-05-05 19:50 ` Arnd Bergmann
2012-05-05 19:50 ` Arnd Bergmann
2012-05-06 14:23 ` Magnus Damm
2012-05-06 14:23 ` Magnus Damm
2012-05-06 14:23 ` Magnus Damm
2012-05-08 20:12 ` Arnd Bergmann
2012-05-08 20:12 ` Arnd Bergmann
2012-05-08 20:12 ` Arnd Bergmann
2012-05-09 7:57 ` Geert Uytterhoeven
2012-05-09 7:57 ` Geert Uytterhoeven
2012-05-09 7:57 ` Geert Uytterhoeven
2012-05-09 8:12 ` Magnus Damm
2012-05-09 8:12 ` Magnus Damm
2012-05-09 8:12 ` Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120503144645.6390.62303.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.