From: Daniel Vetter <daniel@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
"Sun, Yi" <yi.sun@intel.com>
Subject: Re: Updated -next
Date: Tue, 12 Jun 2012 10:37:51 +0200 [thread overview]
Message-ID: <20120612083751.GA5188@phenom.ffwll.local> (raw)
In-Reply-To: <20120604205914.GD29760@phenom.ffwll.local>
Hi Dave,
rc2 is out the door so I've figured I'll annoy you with the first -next
pull request for 3.6 already. Highlights:
- new wait_rendring_timeout interface (Ben)
- l3 cache remapping and error uevent support (Ben)
- even more infoframes work from Paulo
- gen4 hotplug rework from Chris
- prep work to make Laurent Pincharts original mode constification for
connector->mode_fixup possible
QA reported a few new bugs this time around, but no regressions afact. For
3.5 the only thing I'm aware of is the edp vdd dmesg spam Linus originally
reported - it looks like that might have been introduced in 3.5. But
somehow my brain is routinely offline when I work on that issue, so things
seem to take forever (and atm I'm at patch v4 for that little problem).
Yours, Daniel
The following changes since commit 63bc620b45af8c743ac291c8725933278c712692:
radeon: add radeon prime vmap support. (2012-05-31 14:14:01 +0100)
are available in the git repository at:
git://people.freedesktop.org/~danvet/drm-intel tags/drm-intel-next-2012-06-04
for you to fetch changes up to 1523c310b3ed964b71a8db16f70c3bc21cc0642e:
drm/i915: add min freq control to debugfs (2012-06-04 21:34:47 +0200)
----------------------------------------------------------------
Ben Widawsky (8):
drm/i915: timeout parameter for seqno wait
drm/i915: improve i915_wait_request_begin trace
drm/i915: wait render timeout ioctl
drm/i915: s/i915_wait_request/i915_wait_seqno/g
drm/i915: Dynamic Parity Detection handling
drm/i915: enable parity error interrupts
drm/i915: remap l3 on hw init
drm/i915: l3 parity sysfs interface
Chris Wilson (6):
drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq
drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4
drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x
drm/i915/hdmi: Query the live connector status bit for G4x
drm/i915/dp: For consistency use the DP hotplug synonyms
drm/i915/hdmi: Fix reg values for g4x_hdmi_connected
Daniel Vetter (14):
drm/i915: clarify preferred sdvo input mode code
drm/i915: don't silently ignore sdvo mode_set failures
drm/i915: there's no cxsr on ilk
drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set
drm/i915: s/mdelay/msleep/ in the sdvo detect function
drm/i915: ivybridge_handle_parity_error should be static
drm/i915: initialize the parity work only once
drm/i915: simplify sysfs setup code
Merge remote-tracking branch 'airlied/drm-prime-vmap' into drm-intel-next-queued
drm/i915: clarify IBX dp workaround
drm/i915: extract object active state flushing code
drm/i915: compute the target_clock for edp directly
drm/i915: adjusted_mode->clock in the dp mode_fixup
drm/i915: don't chnage the original mode in dp_mode_fixup
Jesse Barnes (1):
drm/i915: add min freq control to debugfs
Paulo Zanoni (11):
drm/i915: add set_infoframes to struct intel_hdmi
drm/i915: properly alternate between DVI and HDMI
drm/i915: only set the HDMI port on the DIP once
drm/i915: enable DIP before enabling each InfoFrame
drm/i915: don't wait for vblank while writing InfoFrames
drm/i915: explicitly disable the DIPs we're not using
drm/i915: disable DIP while changing the port
drm/i915: don't write 0 to DIP control at HDMI init
drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI
drm/i915: remove comment about HSW HDMI DIPs
drm/i915: add some barriers when changing DIPs
drivers/gpu/drm/i915/i915_debugfs.c | 66 +++++++
drivers/gpu/drm/i915/i915_dma.c | 1 +
drivers/gpu/drm/i915/i915_drv.h | 11 +-
drivers/gpu/drm/i915/i915_gem.c | 242 +++++++++++++++++++----
drivers/gpu/drm/i915/i915_irq.c | 171 ++++++++++++-----
drivers/gpu/drm/i915/i915_reg.h | 56 +++++-
drivers/gpu/drm/i915/i915_sysfs.c | 127 +++++++++++-
drivers/gpu/drm/i915/i915_trace.h | 28 ++-
drivers/gpu/drm/i915/intel_ddi.c | 3 +-
drivers/gpu/drm/i915/intel_display.c | 47 ++---
drivers/gpu/drm/i915/intel_dp.c | 53 +++---
drivers/gpu/drm/i915/intel_drv.h | 9 +-
drivers/gpu/drm/i915/intel_hdmi.c | 318 +++++++++++++++++++++++++------
drivers/gpu/drm/i915/intel_overlay.c | 4 +-
drivers/gpu/drm/i915/intel_panel.c | 2 +-
drivers/gpu/drm/i915/intel_ringbuffer.c | 16 +-
drivers/gpu/drm/i915/intel_sdvo.c | 56 ++++--
include/drm/i915_drm.h | 10 +
18 files changed, 965 insertions(+), 255 deletions(-)
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48
next prev parent reply other threads:[~2012-06-12 8:36 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-04 20:59 Updated -next Daniel Vetter
2012-06-12 8:37 ` Daniel Vetter [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-07-22 14:33 updated -next Daniel Vetter
2012-06-21 8:25 Updated -next Daniel Vetter
2012-05-06 19:09 Daniel Vetter
2012-04-21 16:40 Daniel Vetter
2012-04-23 7:39 ` Daniel Vetter
2012-04-23 7:40 ` Sun, Yi
2012-04-27 11:45 ` Daniel Vetter
2012-04-27 13:44 ` Daniel Vetter
2012-04-05 9:45 Daniel Vetter
2012-04-09 16:19 ` Daniel Vetter
2012-04-10 2:09 ` Sun, Yi
2012-04-11 3:20 ` Sun, Yi
2012-04-11 7:54 ` Paul Menzel
2012-04-11 8:24 ` Sun, Yi
2012-04-11 9:45 ` Paul Menzel
2012-03-23 10:03 Daniel Vetter
2012-03-29 7:38 ` Sun, Yi
2012-03-01 20:59 Daniel Vetter
2012-03-08 8:10 ` Sun, Yi
2012-03-18 21:20 ` Daniel Vetter
2012-02-16 17:27 updated -next Daniel Vetter
2012-02-17 17:56 ` Jesse Barnes
2012-02-21 7:45 ` Sun, Yi
2012-02-07 22:59 Daniel Vetter
2012-01-20 10:10 Updated -next Daniel Vetter
2012-01-21 4:15 ` Sun, Yi
2012-01-21 14:12 ` Daniel Vetter
2012-01-21 19:45 ` Alan W. Irwin
2012-01-31 9:07 ` Jin, Gordon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120612083751.GA5188@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=yi.sun@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.