[GIT PULL] Renesas ARM-based SoC boards for v3.8

[GIT PULL] Renesas ARM-based SoC boards for v3.8

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.8.

----------------------------------------------------------------
The following changes since commit ddffeb8c4d0331609ef2581d84de4d763607bd37:

  Linux 3.7-rc1 (2012-10-14 14:41:04 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 5f9f3d29d35cdf6907272e407b4fcf7eabe6b88a:

  ARM: shmobile: marzen: add HSPI support (2012-10-15 09:56:42 +0900)

----------------------------------------------------------------
Bastian Hecht (1):
      ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372

Kuninori Morimoto (5):
      ARM: shmobile: armadillo800eva: enable restart
      ARM: shmobile: r8a7779: add HSPI clock support
      ARM: shmobile: r8a7779: add I2C clock support
      ARM: shmobile: r8a7779: add I2C driver support
      ARM: shmobile: marzen: add HSPI support

Nobuhiro Iwamatsu (1):
      ARM: shmobile: r8a7740: Enable PMU

Tetsuyuki Kobayashi (3):
      ARM: shmobile: kzm9g: enable magnetometer ak8975.
      ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345
      ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

 arch/arm/configs/armadillo800eva_defconfig     |    1 +
 arch/arm/configs/kzm9g_defconfig               |    4 ++
 arch/arm/configs/marzen_defconfig              |    4 ++
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 +++
 arch/arm/mach-shmobile/board-kzm9g.c           |   14 ++++-
 arch/arm/mach-shmobile/board-marzen.c          |   25 ++++++++
 arch/arm/mach-shmobile/clock-r8a7779.c         |   16 ++++-
 arch/arm/mach-shmobile/include/mach/sh7372.h   |    4 ++
 arch/arm/mach-shmobile/setup-r8a7740.c         |   16 +++++
 arch/arm/mach-shmobile/setup-r8a7779.c         |   77 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/setup-sh7372.c          |   20 ++++++
 11 files changed, 187 insertions(+), 2 deletions(-)

[GIT PULL] Renesas ARM-based SoC boards for v3.8

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.8.

----------------------------------------------------------------
The following changes since commit ddffeb8c4d0331609ef2581d84de4d763607bd37:

  Linux 3.7-rc1 (2012-10-14 14:41:04 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 5f9f3d29d35cdf6907272e407b4fcf7eabe6b88a:

  ARM: shmobile: marzen: add HSPI support (2012-10-15 09:56:42 +0900)

----------------------------------------------------------------
Bastian Hecht (1):
      ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372

Kuninori Morimoto (5):
      ARM: shmobile: armadillo800eva: enable restart
      ARM: shmobile: r8a7779: add HSPI clock support
      ARM: shmobile: r8a7779: add I2C clock support
      ARM: shmobile: r8a7779: add I2C driver support
      ARM: shmobile: marzen: add HSPI support

Nobuhiro Iwamatsu (1):
      ARM: shmobile: r8a7740: Enable PMU

Tetsuyuki Kobayashi (3):
      ARM: shmobile: kzm9g: enable magnetometer ak8975.
      ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345
      ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

 arch/arm/configs/armadillo800eva_defconfig     |    1 +
 arch/arm/configs/kzm9g_defconfig               |    4 ++
 arch/arm/configs/marzen_defconfig              |    4 ++
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 +++
 arch/arm/mach-shmobile/board-kzm9g.c           |   14 ++++-
 arch/arm/mach-shmobile/board-marzen.c          |   25 ++++++++
 arch/arm/mach-shmobile/clock-r8a7779.c         |   16 ++++-
 arch/arm/mach-shmobile/include/mach/sh7372.h   |    4 ++
 arch/arm/mach-shmobile/setup-r8a7740.c         |   16 +++++
 arch/arm/mach-shmobile/setup-r8a7779.c         |   77 ++++++++++++++++++++++++
 arch/arm/mach-shmobile/setup-sh7372.c          |   20 ++++++
 11 files changed, 187 insertions(+), 2 deletions(-)

[PATCH 01/10] ARM: shmobile: r8a7740: Enable PMU

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

This patch enables PMU for r8a7740.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/armadillo800eva_defconfig |    1 +
 arch/arm/mach-shmobile/setup-r8a7740.c     |   16 ++++++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index f78d259..3d76407 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT\x16
 # CONFIG_IPC_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 11bb1d9..1e032cb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -590,6 +590,21 @@ static struct platform_device i2c1_device = {
 	.num_resources	= ARRAY_SIZE(i2c1_resources),
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start	= evt2irq(0x19a0),
+		.end	= evt2irq(0x19a0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name	= "arm-pmu",
+	.id		= -1,
+	.num_resources = ARRAY_SIZE(pmu_resources),
+	.resource = pmu_resources,
+};
+
 static struct platform_device *r8a7740_late_devices[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
@@ -597,6 +612,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
 	&dma1_device,
 	&dma2_device,
 	&usb_dma_device,
+	&pmu_device,
 };
 
 /*
-- 
1.7.10.4

[PATCH 01/10] ARM: shmobile: r8a7740: Enable PMU

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

This patch enables PMU for r8a7740.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/armadillo800eva_defconfig |    1 +
 arch/arm/mach-shmobile/setup-r8a7740.c     |   16 ++++++++++++++++
 2 files changed, 17 insertions(+)

diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
index f78d259..3d76407 100644
--- a/arch/arm/configs/armadillo800eva_defconfig
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -7,6 +7,7 @@ CONFIG_LOG_BUF_SHIFT=16
 # CONFIG_IPC_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 11bb1d9..1e032cb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -590,6 +590,21 @@ static struct platform_device i2c1_device = {
 	.num_resources	= ARRAY_SIZE(i2c1_resources),
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start	= evt2irq(0x19a0),
+		.end	= evt2irq(0x19a0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name	= "arm-pmu",
+	.id		= -1,
+	.num_resources = ARRAY_SIZE(pmu_resources),
+	.resource = pmu_resources,
+};
+
 static struct platform_device *r8a7740_late_devices[] __initdata = {
 	&i2c0_device,
 	&i2c1_device,
@@ -597,6 +612,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = {
 	&dma1_device,
 	&dma2_device,
 	&usb_dma_device,
+	&pmu_device,
 };
 
 /*
-- 
1.7.10.4

[PATCH 02/10] ARM: shmobile: kzm9g: enable magnetometer ak8975.

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables magnetometer ak8975.
I checked ak8975_probe() returns successfully.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/kzm9g_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-kzm9g.c |    6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index c88b578..1404b04 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -119,6 +119,8 @@ CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_ASYNC_TX_DMA=y
 CONFIG_STAGING=y
+CONFIG_SENSORS_AK8975=y
+CONFIG_IIO=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY_USER=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..a37da78 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -557,7 +557,11 @@ static struct i2c_board_info i2c0_devices[] = {
 	},
 	{
 		I2C_BOARD_INFO("r2025sd", 0x32),
-	}
+	},
+	{
+		I2C_BOARD_INFO("ak8975", 0x0c),
+		.irq = intcs_evt2irq(0x3380), /* IRQ28 */
+	},
 };
 
 static struct i2c_board_info i2c1_devices[] = {
-- 
1.7.10.4

[PATCH 02/10] ARM: shmobile: kzm9g: enable magnetometer ak8975.

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables magnetometer ak8975.
I checked ak8975_probe() returns successfully.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/kzm9g_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-kzm9g.c |    6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index c88b578..1404b04 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -119,6 +119,8 @@ CONFIG_DMADEVICES=y
 CONFIG_SH_DMAE=y
 CONFIG_ASYNC_TX_DMA=y
 CONFIG_STAGING=y
+CONFIG_SENSORS_AK8975=y
+CONFIG_IIO=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY_USER=y
 CONFIG_VFAT_FS=y
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 0a43f31..a37da78 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -557,7 +557,11 @@ static struct i2c_board_info i2c0_devices[] = {
 	},
 	{
 		I2C_BOARD_INFO("r2025sd", 0x32),
-	}
+	},
+	{
+		I2C_BOARD_INFO("ak8975", 0x0c),
+		.irq = intcs_evt2irq(0x3380), /* IRQ28 */
+	},
 };
 
 static struct i2c_board_info i2c1_devices[] = {
-- 
1.7.10.4

[PATCH 03/10] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables three-axis digital accelerometer ADXL345.
Test:
  sudo cat /dev/input/event2
then tip up the board. You get something from /dev/input/event2.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/kzm9g_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 1404b04..ce99e3e 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ST1232=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=9
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index a37da78..1a46422 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -562,6 +562,10 @@ static struct i2c_board_info i2c0_devices[] = {
 		I2C_BOARD_INFO("ak8975", 0x0c),
 		.irq = intcs_evt2irq(0x3380), /* IRQ28 */
 	},
+	{
+		I2C_BOARD_INFO("adxl34x", 0x1d),
+		.irq = intcs_evt2irq(0x3340), /* IRQ26 */
+	},
 };
 
 static struct i2c_board_info i2c1_devices[] = {
-- 
1.7.10.4

[PATCH 03/10] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables three-axis digital accelerometer ADXL345.
Test:
  sudo cat /dev/input/event2
then tip up the board. You get something from /dev/input/event2.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/kzm9g_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
index 1404b04..ce99e3e 100644
--- a/arch/arm/configs/kzm9g_defconfig
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -74,6 +74,8 @@ CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ST1232=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=9
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index a37da78..1a46422 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -562,6 +562,10 @@ static struct i2c_board_info i2c0_devices[] = {
 		I2C_BOARD_INFO("ak8975", 0x0c),
 		.irq = intcs_evt2irq(0x3380), /* IRQ28 */
 	},
+	{
+		I2C_BOARD_INFO("adxl34x", 0x1d),
+		.irq = intcs_evt2irq(0x3340), /* IRQ26 */
+	},
 };
 
 static struct i2c_board_info i2c1_devices[] = {
-- 
1.7.10.4

[PATCH 04/10] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables DMAEngine on SHDI0 and SDHI2 for kzm9g.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
---
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1a46422..f63f2ee 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[]  
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
@@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = {
 
 /* Micro SD */
 static struct sh_mobile_sdhi_info sdhi2_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_USE_GPIO_CD |
 			  TMIO_MMC_WRPROTECT_DISABLE,
-- 
1.7.10.4

[PATCH 04/10] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2

[Simon Horman]

From: Tetsuyuki Kobayashi <koba@kmckk.co.jp>

This patch enables DMAEngine on SHDI0 and SDHI2 for kzm9g.

Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
---
 arch/arm/mach-shmobile/board-kzm9g.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1a46422..f63f2ee 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -384,6 +384,8 @@ static struct regulator_consumer_supply fixed2v8_power_consumers[] =
 
 /* SDHI */
 static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
@@ -424,6 +426,8 @@ static struct platform_device sdhi0_device = {
 
 /* Micro SD */
 static struct sh_mobile_sdhi_info sdhi2_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
 			  TMIO_MMC_USE_GPIO_CD |
 			  TMIO_MMC_WRPROTECT_DISABLE,
-- 
1.7.10.4

[PATCH 05/10] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372

[Simon Horman]

From: Bastian Hecht <hechtb@googlemail.com>

SH7372 can use DMA with the FLCTL flash controller. Add required slave
IDs and slave descriptors.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/sh7372.h |    4 ++++
 arch/arm/mach-shmobile/setup-sh7372.c        |   20 ++++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index eb98b45..d65fbbe 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -452,6 +452,10 @@ enum {
 	SHDMA_SLAVE_SCIF5_RX,
 	SHDMA_SLAVE_SCIF6_TX,
 	SHDMA_SLAVE_SCIF6_RX,
+	SHDMA_SLAVE_FLCTL0_TX,
+	SHDMA_SLAVE_FLCTL0_RX,
+	SHDMA_SLAVE_FLCTL1_TX,
+	SHDMA_SLAVE_FLCTL1_RX,
 	SHDMA_SLAVE_SDHI0_RX,
 	SHDMA_SLAVE_SDHI0_TX,
 	SHDMA_SLAVE_SDHI1_RX,
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index a07954f..a360111 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -408,6 +408,26 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
 		.mid_rid	= 0x3e,
 	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL0_TX,
+		.addr		= 0xe6a30050,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x83,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL0_RX,
+		.addr		= 0xe6a30050,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x83,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL1_TX,
+		.addr		= 0xe6a30060,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x87,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL1_RX,
+		.addr		= 0xe6a30060,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x87,
+	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
 		.addr		= 0xe6850030,
 		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-- 
1.7.10.4

[PATCH 05/10] ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372

[Simon Horman]

From: Bastian Hecht <hechtb@googlemail.com>

SH7372 can use DMA with the FLCTL flash controller. Add required slave
IDs and slave descriptors.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/sh7372.h |    4 ++++
 arch/arm/mach-shmobile/setup-sh7372.c        |   20 ++++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index eb98b45..d65fbbe 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -452,6 +452,10 @@ enum {
 	SHDMA_SLAVE_SCIF5_RX,
 	SHDMA_SLAVE_SCIF6_TX,
 	SHDMA_SLAVE_SCIF6_RX,
+	SHDMA_SLAVE_FLCTL0_TX,
+	SHDMA_SLAVE_FLCTL0_RX,
+	SHDMA_SLAVE_FLCTL1_TX,
+	SHDMA_SLAVE_FLCTL1_RX,
 	SHDMA_SLAVE_SDHI0_RX,
 	SHDMA_SLAVE_SDHI0_TX,
 	SHDMA_SLAVE_SDHI1_RX,
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index a07954f..a360111 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -408,6 +408,26 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 		.chcr		= CHCR_RX(XMIT_SZ_8BIT),
 		.mid_rid	= 0x3e,
 	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL0_TX,
+		.addr		= 0xe6a30050,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x83,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL0_RX,
+		.addr		= 0xe6a30050,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x83,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL1_TX,
+		.addr		= 0xe6a30060,
+		.chcr		= CHCR_TX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x87,
+	}, {
+		.slave_id	= SHDMA_SLAVE_FLCTL1_RX,
+		.addr		= 0xe6a30060,
+		.chcr		= CHCR_RX(XMIT_SZ_32BIT),
+		.mid_rid	= 0x87,
+	}, {
 		.slave_id	= SHDMA_SLAVE_SDHI0_TX,
 		.addr		= 0xe6850030,
 		.chcr		= CHCR_TX(XMIT_SZ_16BIT),
-- 
1.7.10.4

[PATCH 06/10] ARM: shmobile: armadillo800eva: enable restart

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Cc: Masahiro Nakai <nakai@atmark-techno.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 2912eab..fe27d7e 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void)
 	shmobile_timer.init = eva_earlytimer_init;
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
 static const char *eva_boards_compat_dt[] __initdata = {
 	"renesas,armadillo800eva",
 	NULL,
@@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= eva_boards_compat_dt,
+	.restart	= eva_restart,
 MACHINE_END
-- 
1.7.10.4

[PATCH 06/10] ARM: shmobile: armadillo800eva: enable restart

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Cc: Masahiro Nakai <nakai@atmark-techno.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 2912eab..fe27d7e 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1229,6 +1229,13 @@ static void __init eva_add_early_devices(void)
 	shmobile_timer.init = eva_earlytimer_init;
 }
 
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(char mode, const char *cmd)
+{
+	/* Do soft power on reset */
+	writel((1 << 31), RESCNT2);
+}
+
 static const char *eva_boards_compat_dt[] __initdata = {
 	"renesas,armadillo800eva",
 	NULL,
@@ -1243,4 +1250,5 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= eva_boards_compat_dt,
+	.restart	= eva_restart,
 MACHINE_END
-- 
1.7.10.4

[PATCH 07/10] ARM: shmobile: r8a7779: add HSPI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 3cafb6a..90d717b 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -89,6 +89,7 @@ static struct clk div4_clks[DIV4_NR] = {
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
 	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
+	MSTP007,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -105,6 +106,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */
 	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */
+	[MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0,  7, 0), /* HSPI */
 };
 
 static unsigned long mul4_recalc(struct clk *clk)
@@ -154,6 +156,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
+	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
+	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-- 
1.7.10.4

[PATCH 07/10] ARM: shmobile: r8a7779: add HSPI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 3cafb6a..90d717b 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -89,6 +89,7 @@ static struct clk div4_clks[DIV4_NR] = {
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
 	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
+	MSTP007,
 	MSTP_NR };
 
 static struct clk mstp_clks[MSTP_NR] = {
@@ -105,6 +106,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */
 	[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */
 	[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */
+	[MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0,  7, 0), /* HSPI */
 };
 
 static unsigned long mul4_recalc(struct clk *clk)
@@ -154,6 +156,9 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
+	CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */
+	CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */
+	CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */
-- 
1.7.10.4

[PATCH 08/10] ARM: shmobile: r8a7779: add I2C clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch is required from R-Car I2C driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 90d717b..24f5a84 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -87,7 +87,8 @@ static struct clk div4_clks[DIV4_NR] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
-	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
+	MSTP030,
+	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
 	MSTP007,
 	MSTP_NR };
@@ -97,6 +98,10 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
+	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */
 	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
 	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
 	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
@@ -150,6 +155,10 @@ static struct clk_lookup lookups[] = {
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
+	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-- 
1.7.10.4

[PATCH 08/10] ARM: shmobile: r8a7779: add I2C clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch is required from R-Car I2C driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 90d717b..24f5a84 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -87,7 +87,8 @@ static struct clk div4_clks[DIV4_NR] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
-	MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
+	MSTP030,
+	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
 	MSTP007,
 	MSTP_NR };
@@ -97,6 +98,10 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
+	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
+	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */
 	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
 	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
 	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
@@ -150,6 +155,10 @@ static struct clk_lookup lookups[] = {
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
+	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
+	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */
+	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP028]), /* I2C2 */
+	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP027]), /* I2C3 */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
-- 
1.7.10.4

[PATCH 09/10] ARM: shmobile: r8a7779: add I2C driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enable R-Car I2C driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig      |    2 +
 arch/arm/mach-shmobile/setup-r8a7779.c |   77 ++++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 53382b6..f79b55c 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -69,6 +69,8 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 2917668..63de5cb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -229,6 +229,79 @@ static struct platform_device tmu01_device = {
 	.num_resources	= ARRAY_SIZE(tmu01_resources),
 };
 
+/* I2C */
+static struct resource rcar_i2c0_res[] = {
+	{
+		.start  = 0xffc70000,
+		.end    = 0xffc70fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(79),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c0_device = {
+	.name		= "i2c-rcar",
+	.id		= 0,
+	.resource	= rcar_i2c0_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c0_res),
+};
+
+static struct resource rcar_i2c1_res[] = {
+	{
+		.start  = 0xffc71000,
+		.end    = 0xffc71fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(82),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c1_device = {
+	.name		= "i2c-rcar",
+	.id		= 1,
+	.resource	= rcar_i2c1_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c1_res),
+};
+
+static struct resource rcar_i2c2_res[] = {
+	{
+		.start  = 0xffc72000,
+		.end    = 0xffc72fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c2_device = {
+	.name		= "i2c-rcar",
+	.id		= 2,
+	.resource	= rcar_i2c2_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c2_res),
+};
+
+static struct resource rcar_i2c3_res[] = {
+	{
+		.start  = 0xffc73000,
+		.end    = 0xffc73fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(81),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c3_device = {
+	.name		= "i2c-rcar",
+	.id		= 3,
+	.resource	= rcar_i2c3_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c3_res),
+};
+
 static struct platform_device *r8a7779_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = {
 	&scif5_device,
 	&tmu00_device,
 	&tmu01_device,
+	&i2c0_device,
+	&i2c1_device,
+	&i2c2_device,
+	&i2c3_device,
 };
 
 static struct platform_device *r8a7779_late_devices[] __initdata = {
-- 
1.7.10.4

[PATCH 09/10] ARM: shmobile: r8a7779: add I2C driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch enable R-Car I2C driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig      |    2 +
 arch/arm/mach-shmobile/setup-r8a7779.c |   77 ++++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 53382b6..f79b55c 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -69,6 +69,8 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 2917668..63de5cb 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -229,6 +229,79 @@ static struct platform_device tmu01_device = {
 	.num_resources	= ARRAY_SIZE(tmu01_resources),
 };
 
+/* I2C */
+static struct resource rcar_i2c0_res[] = {
+	{
+		.start  = 0xffc70000,
+		.end    = 0xffc70fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(79),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c0_device = {
+	.name		= "i2c-rcar",
+	.id		= 0,
+	.resource	= rcar_i2c0_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c0_res),
+};
+
+static struct resource rcar_i2c1_res[] = {
+	{
+		.start  = 0xffc71000,
+		.end    = 0xffc71fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(82),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c1_device = {
+	.name		= "i2c-rcar",
+	.id		= 1,
+	.resource	= rcar_i2c1_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c1_res),
+};
+
+static struct resource rcar_i2c2_res[] = {
+	{
+		.start  = 0xffc72000,
+		.end    = 0xffc72fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c2_device = {
+	.name		= "i2c-rcar",
+	.id		= 2,
+	.resource	= rcar_i2c2_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c2_res),
+};
+
+static struct resource rcar_i2c3_res[] = {
+	{
+		.start  = 0xffc73000,
+		.end    = 0xffc73fff,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = gic_spi(81),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c3_device = {
+	.name		= "i2c-rcar",
+	.id		= 3,
+	.resource	= rcar_i2c3_res,
+	.num_resources	= ARRAY_SIZE(rcar_i2c3_res),
+};
+
 static struct platform_device *r8a7779_early_devices[] __initdata = {
 	&scif0_device,
 	&scif1_device,
@@ -238,6 +311,10 @@ static struct platform_device *r8a7779_early_devices[] __initdata = {
 	&scif5_device,
 	&tmu00_device,
 	&tmu01_device,
+	&i2c0_device,
+	&i2c1_device,
+	&i2c2_device,
+	&i2c3_device,
 };
 
 static struct platform_device *r8a7779_late_devices[] __initdata = {
-- 
1.7.10.4

[PATCH 10/10] ARM: shmobile: marzen: add HSPI support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-marzen.c |   25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index f79b55c..5b8215f 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -71,6 +71,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b8a7525..69f7f46 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
@@ -126,10 +128,27 @@ static struct platform_device thermal_device = {
 	.num_resources	= ARRAY_SIZE(thermal_resources),
 };
 
+/* HSPI */
+static struct resource hspi_resources[] = {
+	[0] = {
+		.start		= 0xFFFC7000,
+		.end		= 0xFFFC7018 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device hspi_device = {
+	.name	= "sh-hspi",
+	.id	= 0,
+	.resource	= hspi_resources,
+	.num_resources	= ARRAY_SIZE(hspi_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
+	&hspi_device,
 };
 
 static void __init marzen_init(void)
@@ -163,6 +182,12 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_SD0_CD, NULL);
 	gpio_request(GPIO_FN_SD0_WP, NULL);
 
+	/* HSPI 0 */
+	gpio_request(GPIO_FN_HSPI_CLK0,	NULL);
+	gpio_request(GPIO_FN_HSPI_CS0,	NULL);
+	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
+	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
-- 
1.7.10.4

[PATCH 10/10] ARM: shmobile: marzen: add HSPI support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    2 ++
 arch/arm/mach-shmobile/board-marzen.c |   25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index f79b55c..5b8215f 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -71,6 +71,8 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b8a7525..69f7f46 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
@@ -126,10 +128,27 @@ static struct platform_device thermal_device = {
 	.num_resources	= ARRAY_SIZE(thermal_resources),
 };
 
+/* HSPI */
+static struct resource hspi_resources[] = {
+	[0] = {
+		.start		= 0xFFFC7000,
+		.end		= 0xFFFC7018 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device hspi_device = {
+	.name	= "sh-hspi",
+	.id	= 0,
+	.resource	= hspi_resources,
+	.num_resources	= ARRAY_SIZE(hspi_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
+	&hspi_device,
 };
 
 static void __init marzen_init(void)
@@ -163,6 +182,12 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_SD0_CD, NULL);
 	gpio_request(GPIO_FN_SD0_WP, NULL);
 
+	/* HSPI 0 */
+	gpio_request(GPIO_FN_HSPI_CLK0,	NULL);
+	gpio_request(GPIO_FN_HSPI_CS0,	NULL);
+	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
+	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
-- 
1.7.10.4

[GIT PULL] Renesas ARM-based SoC boards for v3.8 #2

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.8.

* This pull-request is based on an earlier request which I
  posted on the 1st and was merged yesterday: [GIT PULL v3] Renesas
  ARM-based SoC boards for v3.8

* Patch #2 of this series has a build-time dependency on
  the soc pull request that I sent a few minutes ago:
  [GIT PULL] Renesas ARM-based SoC for v3.8 #2

  In particular, "ARM: shmobile: marzen: add USB EHCI driver support"
  depends on "[PATCH 1/7] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx"

----------------------------------------------------------------
The following changes since commit 631a7b5d958d2ef2c2333b105794c693642f0641:

  ARM: shmobile: Remove G4EVM machine support (2012-10-30 15:25:59 +0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 17eada911c88304005bc0acfdd5ae673fb1f2952:

  ARM: shmobile: marzen: add USB OHCI driver support (2012-11-07 17:15:29 +0900)

----------------------------------------------------------------
Kuninori Morimoto (3):
      ARM: shmobile: marzen: add USB phy support
      ARM: shmobile: marzen: add USB EHCI driver support
      ARM: shmobile: marzen: add USB OHCI driver support

 arch/arm/configs/marzen_defconfig     |   14 ++-
 arch/arm/mach-shmobile/Kconfig        |    2 +
 arch/arm/mach-shmobile/board-marzen.c |  186 ++++++++++++++++++++++++++++++++-
 3 files changed, 198 insertions(+), 4 deletions(-)

[GIT PULL] Renesas ARM-based SoC boards for v3.8 #2

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.8.

* This pull-request is based on an earlier request which I
  posted on the 1st and was merged yesterday: [GIT PULL v3] Renesas
  ARM-based SoC boards for v3.8

* Patch #2 of this series has a build-time dependency on
  the soc pull request that I sent a few minutes ago:
  [GIT PULL] Renesas ARM-based SoC for v3.8 #2

  In particular, "ARM: shmobile: marzen: add USB EHCI driver support"
  depends on "[PATCH 1/7] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx"

----------------------------------------------------------------
The following changes since commit 631a7b5d958d2ef2c2333b105794c693642f0641:

  ARM: shmobile: Remove G4EVM machine support (2012-10-30 15:25:59 +0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 17eada911c88304005bc0acfdd5ae673fb1f2952:

  ARM: shmobile: marzen: add USB OHCI driver support (2012-11-07 17:15:29 +0900)

----------------------------------------------------------------
Kuninori Morimoto (3):
      ARM: shmobile: marzen: add USB phy support
      ARM: shmobile: marzen: add USB EHCI driver support
      ARM: shmobile: marzen: add USB OHCI driver support

 arch/arm/configs/marzen_defconfig     |   14 ++-
 arch/arm/mach-shmobile/Kconfig        |    2 +
 arch/arm/mach-shmobile/board-marzen.c |  186 ++++++++++++++++++++++++++++++++-
 3 files changed, 198 insertions(+), 4 deletions(-)

[PATCH 1/3] ARM: shmobile: marzen: add USB phy support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    3 ++-
 arch/arm/mach-shmobile/board-marzen.c |   21 +++++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 5b8215f..8a861b7 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -78,7 +78,8 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_SSB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_UIO=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 69f7f46..74c7f0b 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -144,11 +144,32 @@ static struct platform_device hspi_device = {
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70000,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0xfff70000,
+		.end		= 0xfff70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device usb_phy_device = {
+	.name		= "rcar_usb_phy",
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
+	&usb_phy_device,
 };
 
 static void __init marzen_init(void)
-- 
1.7.10.4

[PATCH 1/3] ARM: shmobile: marzen: add USB phy support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    3 ++-
 arch/arm/mach-shmobile/board-marzen.c |   21 +++++++++++++++++++++
 2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 5b8215f..8a861b7 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -78,7 +78,8 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_THERMAL=y
 CONFIG_RCAR_THERMAL=y
 CONFIG_SSB=y
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_UIO=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 69f7f46..74c7f0b 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -144,11 +144,32 @@ static struct platform_device hspi_device = {
 	.num_resources	= ARRAY_SIZE(hspi_resources),
 };
 
+/* USB PHY */
+static struct resource usb_phy_resources[] = {
+	[0] = {
+		.start		= 0xffe70000,
+		.end		= 0xffe70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 0xfff70000,
+		.end		= 0xfff70900 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device usb_phy_device = {
+	.name		= "rcar_usb_phy",
+	.resource	= usb_phy_resources,
+	.num_resources	= ARRAY_SIZE(usb_phy_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
 	&hspi_device,
+	&usb_phy_device,
 };
 
 static void __init marzen_init(void)
-- 
1.7.10.4

[PATCH 2/3] ARM: shmobile: marzen: add USB EHCI driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch supports CN21/CN22 USB 2.0 (port 0/1/2),
and enable USB momery on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    6 ++
 arch/arm/mach-shmobile/Kconfig        |    1 +
 arch/arm/mach-shmobile/board-marzen.c |  108 ++++++++++++++++++++++++++++++++-
 3 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 8a861b7..6540dfb 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -47,6 +47,8 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -82,6 +84,10 @@ CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f58c3ea..c03aeec 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -41,6 +41,7 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select USB_ARCH_HAS_EHCI
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 74c7f0b..707b3bd 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -34,6 +34,9 @@
 #include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -172,6 +175,101 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&usb_phy_device,
 };
 
+/* USB */
+static struct usb_phy *phy;
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(44),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(45),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct platform_device *marzen_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+};
+
+void __init marzen_init_late(void)
+{
+	/* get usb phy */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(marzen_late_devices,
+			     ARRAY_SIZE(marzen_late_devices));
+}
+
 static void __init marzen_init(void)
 {
 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
@@ -209,6 +307,14 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
 	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
 
+	/* USB (CN21) */
+	gpio_request(GPIO_FN_USB_OVC0, NULL);
+	gpio_request(GPIO_FN_USB_OVC1, NULL);
+	gpio_request(GPIO_FN_USB_OVC2, NULL);
+
+	/* USB (CN22) */
+	gpio_request(GPIO_FN_USB_PENC2, NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
@@ -221,6 +327,6 @@ MACHINE_START(MARZEN, "marzen")
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
-	.init_late	= shmobile_init_late,
+	.init_late	= marzen_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
-- 
1.7.10.4

[PATCH 2/3] ARM: shmobile: marzen: add USB EHCI driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch supports CN21/CN22 USB 2.0 (port 0/1/2),
and enable USB momery on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    6 ++
 arch/arm/mach-shmobile/Kconfig        |    1 +
 arch/arm/mach-shmobile/board-marzen.c |  108 ++++++++++++++++++++++++++++++++-
 3 files changed, 114 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 8a861b7..6540dfb 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -47,6 +47,8 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -82,6 +84,10 @@ CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index f58c3ea..c03aeec 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -41,6 +41,7 @@ config ARCH_R8A7779
 	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
+	select USB_ARCH_HAS_EHCI
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 74c7f0b..707b3bd 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -34,6 +34,9 @@
 #include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ehci_pdriver.h>
+#include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
 #include <mach/common.h>
@@ -172,6 +175,101 @@ static struct platform_device *marzen_devices[] __initdata = {
 	&usb_phy_device,
 };
 
+/* USB */
+static struct usb_phy *phy;
+static int usb_power_on(struct platform_device *pdev)
+{
+	if (!phy)
+		return -EIO;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	usb_phy_init(phy);
+
+	return 0;
+}
+
+static void usb_power_off(struct platform_device *pdev)
+{
+	if (!phy)
+		return;
+
+	usb_phy_shutdown(phy);
+
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+}
+
+static struct usb_ehci_pdata ehcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ehci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70000,
+		.end	= 0xffe70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(44),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci0_device = {
+	.name	= "ehci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ehci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci0_resources),
+	.resource	= ehci0_resources,
+};
+
+static struct resource ehci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70000,
+		.end	= 0xfff70400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(45),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ehci1_device = {
+	.name	= "ehci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ehci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ehcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ehci1_resources),
+	.resource	= ehci1_resources,
+};
+
+static struct platform_device *marzen_late_devices[] __initdata = {
+	&ehci0_device,
+	&ehci1_device,
+};
+
+void __init marzen_init_late(void)
+{
+	/* get usb phy */
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+	shmobile_init_late();
+	platform_add_devices(marzen_late_devices,
+			     ARRAY_SIZE(marzen_late_devices));
+}
+
 static void __init marzen_init(void)
 {
 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
@@ -209,6 +307,14 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
 	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
 
+	/* USB (CN21) */
+	gpio_request(GPIO_FN_USB_OVC0, NULL);
+	gpio_request(GPIO_FN_USB_OVC1, NULL);
+	gpio_request(GPIO_FN_USB_OVC2, NULL);
+
+	/* USB (CN22) */
+	gpio_request(GPIO_FN_USB_PENC2, NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
@@ -221,6 +327,6 @@ MACHINE_START(MARZEN, "marzen")
 	.init_irq	= r8a7779_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= marzen_init,
-	.init_late	= shmobile_init_late,
+	.init_late	= marzen_init_late,
 	.timer		= &shmobile_timer,
 MACHINE_END
-- 
1.7.10.4

[PATCH 3/3] ARM: shmobile: marzen: add USB OHCI driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch supports CN21/CN22 USB 1.x (port 0/1/2),
and enable input event on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    5 +--
 arch/arm/mach-shmobile/Kconfig        |    1 +
 arch/arm/mach-shmobile/board-marzen.c |   57 +++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 6540dfb..728a43c 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -61,9 +61,8 @@ CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -86,6 +85,8 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_UIO=y
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index c03aeec..64db252 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -42,6 +42,7 @@ config ARCH_R8A7779
 	select CPU_V7
 	select SH_CLK_CPG
 	select USB_ARCH_HAS_EHCI
+	select USB_ARCH_HAS_OHCI
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 707b3bd..449f928 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -36,6 +36,7 @@
 #include <linux/mfd/tmio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
 #include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
@@ -255,9 +256,65 @@ static struct platform_device ehci1_device = {
 	.resource	= ehci1_resources,
 };
 
+static struct usb_ohci_pdata ohcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(44),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci0_device = {
+	.name	= "ohci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci0_resources),
+	.resource	= ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70400,
+		.end	= 0xfff70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(45),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci1_device = {
+	.name	= "ohci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci1_resources),
+	.resource	= ohci1_resources,
+};
+
 static struct platform_device *marzen_late_devices[] __initdata = {
 	&ehci0_device,
 	&ehci1_device,
+	&ohci0_device,
+	&ohci1_device,
 };
 
 void __init marzen_init_late(void)
-- 
1.7.10.4

[PATCH 3/3] ARM: shmobile: marzen: add USB OHCI driver support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch supports CN21/CN22 USB 1.x (port 0/1/2),
and enable input event on defconfig

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    5 +--
 arch/arm/mach-shmobile/Kconfig        |    1 +
 arch/arm/mach-shmobile/board-marzen.c |   57 +++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+), 2 deletions(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 6540dfb..728a43c 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -61,9 +61,8 @@ CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
 # CONFIG_VT is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -86,6 +85,8 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_STORAGE=y
 CONFIG_UIO=y
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index c03aeec..64db252 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -42,6 +42,7 @@ config ARCH_R8A7779
 	select CPU_V7
 	select SH_CLK_CPG
 	select USB_ARCH_HAS_EHCI
+	select USB_ARCH_HAS_OHCI
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 707b3bd..449f928 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -36,6 +36,7 @@
 #include <linux/mfd/tmio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ehci_pdriver.h>
+#include <linux/usb/ohci_pdriver.h>
 #include <linux/pm_runtime.h>
 #include <mach/hardware.h>
 #include <mach/r8a7779.h>
@@ -255,9 +256,65 @@ static struct platform_device ehci1_device = {
 	.resource	= ehci1_resources,
 };
 
+static struct usb_ohci_pdata ohcix_pdata = {
+	.power_on	= usb_power_on,
+	.power_off	= usb_power_off,
+	.power_suspend	= usb_power_off,
+};
+
+static struct resource ohci0_resources[] = {
+	[0] = {
+		.start	= 0xffe70400,
+		.end	= 0xffe70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(44),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci0_device = {
+	.name	= "ohci-platform",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ohci0_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci0_resources),
+	.resource	= ohci0_resources,
+};
+
+static struct resource ohci1_resources[] = {
+	[0] = {
+		.start	= 0xfff70400,
+		.end	= 0xfff70800 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(45),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ohci1_device = {
+	.name	= "ohci-platform",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ohci1_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &ohcix_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(ohci1_resources),
+	.resource	= ohci1_resources,
+};
+
 static struct platform_device *marzen_late_devices[] __initdata = {
 	&ehci0_device,
 	&ehci1_device,
+	&ohci0_device,
+	&ohci1_device,
 };
 
 void __init marzen_init_late(void)
-- 
1.7.10.4

[GIT PULL] Renesas ARM-based SoC boards for v3.8 #3

[Simon Horman]

Hi Olof, Hi Arnd,

Please consider the following board fix for 3.8.

Also, please let me know if you would prefer me to supply
this as a fixes branch as we are now in the 3.7-rc6 timeframe
where I understand that non-fix commits are no longer allowed for 3.8.

This commit is based on the renesas/boards2 branch of the arm-soc tree.

----------------------------------------------------------------
The following changes since commit 12818d82ccad9868a820dbb193b4f9b797cd02d4:

  ARM: shmobile: use FSI driver's audio clock on ap4evb (2012-11-08 17:52:05 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards3

for you to fetch changes up to d01f4b82fbee516b4d3f03b086333fc4a127983c:

  ARM: shmobile: mackerel: Add FLCTL IRQ resource (2012-11-19 10:08:20 +0900)

----------------------------------------------------------------
Bastian Hecht (1):
      ARM: shmobile: mackerel: Add FLCTL IRQ resource

 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

[GIT PULL] Renesas ARM-based SoC boards for v3.8 #3

[Simon Horman]

Hi Olof, Hi Arnd,

Please consider the following board fix for 3.8.

Also, please let me know if you would prefer me to supply
this as a fixes branch as we are now in the 3.7-rc6 timeframe
where I understand that non-fix commits are no longer allowed for 3.8.

This commit is based on the renesas/boards2 branch of the arm-soc tree.

----------------------------------------------------------------
The following changes since commit 12818d82ccad9868a820dbb193b4f9b797cd02d4:

  ARM: shmobile: use FSI driver's audio clock on ap4evb (2012-11-08 17:52:05 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards3

for you to fetch changes up to d01f4b82fbee516b4d3f03b086333fc4a127983c:

  ARM: shmobile: mackerel: Add FLCTL IRQ resource (2012-11-19 10:08:20 +0900)

----------------------------------------------------------------
Bastian Hecht (1):
      ARM: shmobile: mackerel: Add FLCTL IRQ resource

 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Since commit 3c7ea4eccfd2e the sh_flctl driver requires the error IRQ line to
signal failed transactions between the flash controller and the NAND chip.
This information is mandatory - else the driver refuses to start up. We
provide it here for the board mackerel.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index bf2bcb9..3f56e70 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -950,7 +950,11 @@ static struct resource nand_flash_resources[] = {
 		.start	= 0xe6a30000,
 		.end	= 0xe6a3009b,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= evt2irq(0x0d80), /* flstei: status error irq */
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct sh_flctl_platform_data nand_flash_data = {
-- 
1.7.10.4

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Since commit 3c7ea4eccfd2e the sh_flctl driver requires the error IRQ line to
signal failed transactions between the flash controller and the NAND chip.
This information is mandatory - else the driver refuses to start up. We
provide it here for the board mackerel.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index bf2bcb9..3f56e70 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -950,7 +950,11 @@ static struct resource nand_flash_resources[] = {
 		.start	= 0xe6a30000,
 		.end	= 0xe6a3009b,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= evt2irq(0x0d80), /* flstei: status error irq */
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct sh_flctl_platform_data nand_flash_data = {
-- 
1.7.10.4

Re: [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Sergei Shtylyov]

Hello.

On 19-11-2012 5:24, Simon Horman wrote:

> From: Bastian Hecht <hechtb@gmail.com>

> Since commit 3c7ea4eccfd2e

    Please also specify that commit summary in parens.

> the sh_flctl driver requires the error IRQ line to
> signal failed transactions between the flash controller and the NAND chip.
> This information is mandatory - else the driver refuses to start up. We
> provide it here for the board mackerel.

> Signed-off-by: Bastian Hecht <hechtb@gmail.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>

WBR, Sergei

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Sergei Shtylyov]

Hello.

On 19-11-2012 5:24, Simon Horman wrote:

> From: Bastian Hecht <hechtb@gmail.com>

> Since commit 3c7ea4eccfd2e

    Please also specify that commit summary in parens.

> the sh_flctl driver requires the error IRQ line to
> signal failed transactions between the flash controller and the NAND chip.
> This information is mandatory - else the driver refuses to start up. We
> provide it here for the board mackerel.

> Signed-off-by: Bastian Hecht <hechtb@gmail.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>

WBR, Sergei

Re: [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

On Mon, Nov 19, 2012 at 04:30:59PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 19-11-2012 5:24, Simon Horman wrote:
> 
> >From: Bastian Hecht <hechtb@gmail.com>
> 
> >Since commit 3c7ea4eccfd2e
> 
>    Please also specify that commit summary in parens.

Thanks, I will fix this and re-post.

> >the sh_flctl driver requires the error IRQ line to
> >signal failed transactions between the flash controller and the NAND chip.
> >This information is mandatory - else the driver refuses to start up. We
> >provide it here for the board mackerel.
> 
> >Signed-off-by: Bastian Hecht <hechtb@gmail.com>
> >Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

On Mon, Nov 19, 2012 at 04:30:59PM +0400, Sergei Shtylyov wrote:
> Hello.
> 
> On 19-11-2012 5:24, Simon Horman wrote:
> 
> >From: Bastian Hecht <hechtb@gmail.com>
> 
> >Since commit 3c7ea4eccfd2e
> 
>    Please also specify that commit summary in parens.

Thanks, I will fix this and re-post.

> >the sh_flctl driver requires the error IRQ line to
> >signal failed transactions between the flash controller and the NAND chip.
> >This information is mandatory - else the driver refuses to start up. We
> >provide it here for the board mackerel.
> 
> >Signed-off-by: Bastian Hecht <hechtb@gmail.com>
> >Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> WBR, Sergei
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[GIT PULL] Renesas ARM-based SoC boards for v3.9

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.9.

----------------------------------------------------------------
The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

  Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 42dd581bc4dba82e8756bb881fa974742250b4c6:

  ARM: shmobile: Include sh73a0 DTSI in kzm9g (2013-01-25 09:26:33 +0900)

----------------------------------------------------------------
Guennadi Liakhovetski (1):
      ARM: mackerel: include the correct .dtsi file

Kuninori Morimoto (3):
      ARM: shmobile: fix sample amixer settings for mackerel
      ARM: shmobile: add sample amixer settings for ap4evb
      ARM: shmobile: add sample amixer settings for armadillo800eva

Laurent Pinchart (2):
      ARM: shmobile: kzm9g: Use of_machine_is_compatible()
      ARM: shmobile: Include sh73a0 DTSI in kzm9g

Nobuhiro Iwamatsu (1):
      ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva

 arch/arm/boot/dts/r8a7740-armadillo800eva.dts  |    2 +-
 arch/arm/boot/dts/sh7372-mackerel.dts          |    2 +-
 arch/arm/boot/dts/sh73a0-kzm9g.dts             |    2 +-
 arch/arm/mach-shmobile/board-ap4evb.c          |    4 ++++
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 arch/arm/mach-shmobile/board-kzm9g.c           |    2 +-
 arch/arm/mach-shmobile/board-mackerel.c        |    4 +---
 7 files changed, 17 insertions(+), 7 deletions(-)

[GIT PULL] Renesas ARM-based SoC boards for v3.9

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following board enhancements for 3.9.

----------------------------------------------------------------
The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:

  Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

for you to fetch changes up to 42dd581bc4dba82e8756bb881fa974742250b4c6:

  ARM: shmobile: Include sh73a0 DTSI in kzm9g (2013-01-25 09:26:33 +0900)

----------------------------------------------------------------
Guennadi Liakhovetski (1):
      ARM: mackerel: include the correct .dtsi file

Kuninori Morimoto (3):
      ARM: shmobile: fix sample amixer settings for mackerel
      ARM: shmobile: add sample amixer settings for ap4evb
      ARM: shmobile: add sample amixer settings for armadillo800eva

Laurent Pinchart (2):
      ARM: shmobile: kzm9g: Use of_machine_is_compatible()
      ARM: shmobile: Include sh73a0 DTSI in kzm9g

Nobuhiro Iwamatsu (1):
      ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva

 arch/arm/boot/dts/r8a7740-armadillo800eva.dts  |    2 +-
 arch/arm/boot/dts/sh7372-mackerel.dts          |    2 +-
 arch/arm/boot/dts/sh73a0-kzm9g.dts             |    2 +-
 arch/arm/mach-shmobile/board-ap4evb.c          |    4 ++++
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 arch/arm/mach-shmobile/board-kzm9g.c           |    2 +-
 arch/arm/mach-shmobile/board-mackerel.c        |    4 +---
 7 files changed, 17 insertions(+), 7 deletions(-)

[PATCH 1/7] ARM: mackerel: include the correct .dtsi file

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Mackerel's .dts Device Tree description file should derive from the SoC's
.dtsi, not from skeleton.dtsi directly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/boot/dts/sh7372-mackerel.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts
index 286f0ca..2ede70d 100644
--- a/arch/arm/boot/dts/sh7372-mackerel.dts
+++ b/arch/arm/boot/dts/sh7372-mackerel.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "sh7372.dtsi"
 
 / {
 	model = "Mackerel (AP4 EVM 2nd)";
-- 
1.7.10.4

[PATCH 1/7] ARM: mackerel: include the correct .dtsi file

[Simon Horman]

From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

Mackerel's .dts Device Tree description file should derive from the SoC's
.dtsi, not from skeleton.dtsi directly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/boot/dts/sh7372-mackerel.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts
index 286f0ca..2ede70d 100644
--- a/arch/arm/boot/dts/sh7372-mackerel.dts
+++ b/arch/arm/boot/dts/sh7372-mackerel.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "sh7372.dtsi"
 
 / {
 	model = "Mackerel (AP4 EVM 2nd)";
-- 
1.7.10.4

[PATCH 2/7] ARM: shmobile: fix sample amixer settings for mackerel

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch updates FSI-AK4643 amixer setting

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 2fed62f..002eaf6 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -202,9 +202,7 @@
  *
  * it needs amixer settings for playing
  *
- * amixer set "Headphone" on
- * amixer set "HPOUTL Mixer DACH" on
- * amixer set "HPOUTR Mixer DACH" on
+ * amixer set "Headphone Enable" on
  */
 
 /* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
-- 
1.7.10.4

[PATCH 2/7] ARM: shmobile: fix sample amixer settings for mackerel

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch updates FSI-AK4643 amixer setting

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 2fed62f..002eaf6 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -202,9 +202,7 @@
  *
  * it needs amixer settings for playing
  *
- * amixer set "Headphone" on
- * amixer set "HPOUTL Mixer DACH" on
- * amixer set "HPOUTR Mixer DACH" on
+ * amixer set "Headphone Enable" on
  */
 
 /* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
-- 
1.7.10.4

[PATCH 3/7] ARM: shmobile: add sample amixer settings for ap4evb

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

FSI2A-AK4643 needs amixer setting to use it.
This patch adds quick setting guide

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ap4evb.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 99ef190..70d287c 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -143,6 +143,10 @@
  *
  * SW41	:  ON : SH-Mobile AP4 Audio Mode
  *	: OFF : Bluetooth Audio Mode
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone Enable" on
  */
 
 /*
-- 
1.7.10.4

[PATCH 3/7] ARM: shmobile: add sample amixer settings for ap4evb

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

FSI2A-AK4643 needs amixer setting to use it.
This patch adds quick setting guide

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-ap4evb.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 99ef190..70d287c 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -143,6 +143,10 @@
  *
  * SW41	:  ON : SH-Mobile AP4 Audio Mode
  *	: OFF : Bluetooth Audio Mode
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone Enable" on
  */
 
 /*
-- 
1.7.10.4

[PATCH 4/7] ARM: shmobile: add sample amixer settings for armadillo800eva

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

wm8978 codec requires amixer settings for capture.
This patch adds sample amixer settings on comment area.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 5353adf..5f179e1 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -124,6 +124,14 @@
  * this command is required when playback.
  *
  * # amixer set "Headphone" 50
+ *
+ * this command is required when capture.
+ *
+ * # amixer set "Input PGA" 15
+ * # amixer set "Left Input Mixer MicP" on
+ * # amixer set "Left Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicP" on
  */
 
 /*
-- 
1.7.10.4

[PATCH 4/7] ARM: shmobile: add sample amixer settings for armadillo800eva

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

wm8978 codec requires amixer settings for capture.
This patch adds sample amixer settings on comment area.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-armadillo800eva.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 5353adf..5f179e1 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -124,6 +124,14 @@
  * this command is required when playback.
  *
  * # amixer set "Headphone" 50
+ *
+ * this command is required when capture.
+ *
+ * # amixer set "Input PGA" 15
+ * # amixer set "Left Input Mixer MicP" on
+ * # amixer set "Left Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicP" on
  */
 
 /*
-- 
1.7.10.4

[PATCH 5/7] ARM: shmobile: kzm9g: Use of_machine_is_compatible()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The machine number is hardcoded to ~0 on DT-enabled machines, making
machine_is_*() always fail when support for more than one machine is
compiled into the kernel. Replace the machine_is_kzm9g() call with
of_machine_is_compatible("renesas,kzm9g").

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9g.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index c02448d..eadf309 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -623,7 +623,7 @@ static int __init as3711_enable_lcdc_backlight(void)
 		0x45, 0xf0,
 	};
 
-	if (!machine_is_kzm9g())
+	if (!of_machine_is_compatible("renesas,kzm9g"))
 		return 0;
 
 	if (!a)
-- 
1.7.10.4

[PATCH 5/7] ARM: shmobile: kzm9g: Use of_machine_is_compatible()

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The machine number is hardcoded to ~0 on DT-enabled machines, making
machine_is_*() always fail when support for more than one machine is
compiled into the kernel. Replace the machine_is_kzm9g() call with
of_machine_is_compatible("renesas,kzm9g").

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/mach-shmobile/board-kzm9g.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index c02448d..eadf309 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -623,7 +623,7 @@ static int __init as3711_enable_lcdc_backlight(void)
 		0x45, 0xf0,
 	};
 
-	if (!machine_is_kzm9g())
+	if (!of_machine_is_compatible("renesas,kzm9g"))
 		return 0;
 
 	if (!a)
-- 
1.7.10.4

[PATCH 6/7] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a7505a9..a8e7bd9 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "r8a7740.dtsi"
 
 / {
 	model = "armadillo 800 eva";
-- 
1.7.10.4

[PATCH 6/7] ARM: shmobile: Include DTSI of r8a7740 to armadillo800eva

[Simon Horman]

From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a7505a9..a8e7bd9 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "r8a7740.dtsi"
 
 / {
 	model = "armadillo 800 eva";
-- 
1.7.10.4

[PATCH 7/7] ARM: shmobile: Include sh73a0 DTSI in kzm9g

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index bcb9119..7b37901 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "sh73a0.dtsi"
 
 / {
 	model = "KZM-A9-GT";
-- 
1.7.10.4

[PATCH 7/7] ARM: shmobile: Include sh73a0 DTSI in kzm9g

[Simon Horman]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/sh73a0-kzm9g.dts |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index bcb9119..7b37901 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -9,7 +9,7 @@
  */
 
 /dts-v1/;
-/include/ "skeleton.dtsi"
+/include/ "sh73a0.dtsi"
 
 / {
 	model = "KZM-A9-GT";
-- 
1.7.10.4

Re: [GIT PULL] Renesas ARM-based SoC boards for v3.9

[Olof Johansson]

On Fri, Jan 25, 2013 at 11:17:26AM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following board enhancements for 3.9.
> 
> ----------------------------------------------------------------
> The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:
> 
>   Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

Pulled, thanks.


-Olof

[GIT PULL] Renesas ARM-based SoC boards for v3.9

[Olof Johansson]

On Fri, Jan 25, 2013 at 11:17:26AM +0900, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following board enhancements for 3.9.
> 
> ----------------------------------------------------------------
> The following changes since commit 9931faca02c604c22335f5a935a501bb2ace6e20:
> 
>   Linux 3.8-rc3 (2013-01-09 18:59:55 -0800)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git boards

Pulled, thanks.


-Olof

Re: [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

On Tue, Nov 20, 2012 at 01:05:00AM +0100, Bastian Hecht wrote:
> Since commit 3c7ea4e (mtd: sh_flctl: Add support for error IRQ)
> the sh_flctl driver requires the error IRQ line to signal failed
> transactions between the flash controller and the NAND chip.
> This information is mandatory - else the driver refuses to start
> up. We provide it here for the board mackerel.
> 
> Signed-off-by: Bastian Hecht <hechtb@gmail.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>
> ---
> v1: extended commit
> v2: added commit message of referenced patch

Thanks, I have updated the boards2 branch and sent an
updated pull-request to arm-soc.

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Since commit 3c7ea4e (mtd: sh_flctl: Add support for error IRQ)
the sh_flctl driver requires the error IRQ line to signal failed
transactions between the flash controller and the NAND chip.
This information is mandatory - else the driver refuses to start
up. We provide it here for the board mackerel.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index bf2bcb9..3f56e70 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -950,7 +950,11 @@ static struct resource nand_flash_resources[] = {
 		.start	= 0xe6a30000,
 		.end	= 0xe6a3009b,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= evt2irq(0x0d80), /* flstei: status error irq */
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct sh_flctl_platform_data nand_flash_data = {
-- 
1.7.10.4

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

From: Bastian Hecht <hechtb@gmail.com>

Since commit 3c7ea4e (mtd: sh_flctl: Add support for error IRQ)
the sh_flctl driver requires the error IRQ line to signal failed
transactions between the flash controller and the NAND chip.
This information is mandatory - else the driver refuses to start
up. We provide it here for the board mackerel.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index bf2bcb9..3f56e70 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -950,7 +950,11 @@ static struct resource nand_flash_resources[] = {
 		.start	= 0xe6a30000,
 		.end	= 0xe6a3009b,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= evt2irq(0x0d80), /* flstei: status error irq */
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct sh_flctl_platform_data nand_flash_data = {
-- 
1.7.10.4

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Bastian Hecht]

Since commit 3c7ea4e (mtd: sh_flctl: Add support for error IRQ)
the sh_flctl driver requires the error IRQ line to signal failed
transactions between the flash controller and the NAND chip.
This information is mandatory - else the driver refuses to start
up. We provide it here for the board mackerel.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
v1: extended commit
v2: added commit message of referenced patch

 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0c27c81..66ec616 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1018,7 +1018,11 @@ static struct resource nand_flash_resources[] = {
 		.start	= 0xe6a30000,
 		.end	= 0xe6a3009b,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= evt2irq(0x0d80), /* flstei: status error irq */
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct sh_flctl_platform_data nand_flash_data = {
-- 
1.7.9.5

Re: [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

On Thu, Nov 15, 2012 at 10:13:51AM +0100, Bastian Hecht wrote:
> Hello Simon,
> 
> > could you provide a little more information on:
> > * Why this is so. Is it related to a change in another commit?
> 
> Oh sure. So, the error IRQ was introduced in commit 3c7ea4eccfd2e mtd:
> sh_flctl: Add support for error IRQ.
> It notifies us when the actual communication from our flash controller
> to the NAND chip fails.
> 
> > * What the implications are of this change not being applied:
> >   the driver doesn't work?
> 
> Yes the driver refuses to start up if the error IRQ is missing.
> 
> Do you think I should include such information into the commit
> message, or is it just helpful for the upstream process?

Yes. Please re-post the patch with a revised commit message
that includes the information above.

Re: [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Bastian Hecht]

Hello Simon,

> could you provide a little more information on:
> * Why this is so. Is it related to a change in another commit?

Oh sure. So, the error IRQ was introduced in commit 3c7ea4eccfd2e mtd:
sh_flctl: Add support for error IRQ.
It notifies us when the actual communication from our flash controller
to the NAND chip fails.

> * What the implications are of this change not being applied:
>   the driver doesn't work?

Yes the driver refuses to start up if the error IRQ is missing.

Do you think I should include such information into the commit
message, or is it just helpful for the upstream process?

Cheers,

 Bastian

Re: [PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Simon Horman]

On Tue, Nov 13, 2012 at 11:46:49AM +0100, Bastian Hecht wrote:
> The FLCTL driver now requires the resource of the error IRQ.

Hi Bastian,

could you provide a little more information on:
* Why this is so. Is it related to a change in another commit?
* What the implications are of this change not being applied:
  the driver doesn't work?

> Signed-off-by: Bastian Hecht <hechtb@gmail.com>
> ---
>  arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
> index 0c27c81..66ec616 100644
> --- a/arch/arm/mach-shmobile/board-mackerel.c
> +++ b/arch/arm/mach-shmobile/board-mackerel.c
> @@ -1018,7 +1018,11 @@ static struct resource nand_flash_resources[] = {
>  		.start	= 0xe6a30000,
>  		.end	= 0xe6a3009b,
>  		.flags	= IORESOURCE_MEM,
> -	}
> +	},
> +	[1] = {
> +		.start	= evt2irq(0x0d80), /* flstei: status error irq */
> +		.flags	= IORESOURCE_IRQ,
> +	},
>  };
>  
>  static struct sh_flctl_platform_data nand_flash_data = {
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

[PATCH] ARM: shmobile: mackerel: Add FLCTL IRQ resource

[Bastian Hecht]

The FLCTL driver now requires the resource of the error IRQ.

Signed-off-by: Bastian Hecht <hechtb@gmail.com>
---
 arch/arm/mach-shmobile/board-mackerel.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0c27c81..66ec616 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1018,7 +1018,11 @@ static struct resource nand_flash_resources[] = {
 		.start	= 0xe6a30000,
 		.end	= 0xe6a3009b,
 		.flags	= IORESOURCE_MEM,
-	}
+	},
+	[1] = {
+		.start	= evt2irq(0x0d80), /* flstei: status error irq */
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct sh_flctl_platform_data nand_flash_data = {
-- 
1.7.9.5