* [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
@ 2013-06-28 7:16 ` Jingoo Han
0 siblings, 0 replies; 7+ messages in thread
From: Jingoo Han @ 2013-06-28 7:16 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc
Cc: 'Kishon Vijay Abraham I',
linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
'Felipe Balbi', 'Tomasz Figa',
devicetree-discuss, 'Inki Dae', 'Donghwa Lee',
'Kyungmin Park',
'Jean-Christophe PLAGNIOL-VILLARD',
linux-fbdev, 'Jingoo Han'
Add PHY provider node for the DP PHY.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 41cd625..f7bac75 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -614,6 +614,12 @@
interrupts = <0 94 0>;
};
+ dp_phy: video-phy@10040720 {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ reg = <0x10040720 4>;
+ #phy-cells = <0>;
+ };
+
dp-controller {
compatible = "samsung,exynos5-dp";
reg = <0x145b0000 0x1000>;
@@ -623,11 +629,8 @@
clock-names = "dp";
#address-cells = <1>;
#size-cells = <0>;
-
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
+ phys = <&dp_phy 0>;
+ phy-names = "dp";
};
fimd {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
@ 2013-06-28 7:16 ` Jingoo Han
0 siblings, 0 replies; 7+ messages in thread
From: Jingoo Han @ 2013-06-28 7:16 UTC (permalink / raw)
To: linux-arm-kernel
Add PHY provider node for the DP PHY.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 41cd625..f7bac75 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -614,6 +614,12 @@
interrupts = <0 94 0>;
};
+ dp_phy: video-phy at 10040720 {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ reg = <0x10040720 4>;
+ #phy-cells = <0>;
+ };
+
dp-controller {
compatible = "samsung,exynos5-dp";
reg = <0x145b0000 0x1000>;
@@ -623,11 +629,8 @@
clock-names = "dp";
#address-cells = <1>;
#size-cells = <0>;
-
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
+ phys = <&dp_phy 0>;
+ phy-names = "dp";
};
fimd {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
@ 2013-06-28 7:16 ` Jingoo Han
0 siblings, 0 replies; 7+ messages in thread
From: Jingoo Han @ 2013-06-28 7:16 UTC (permalink / raw)
To: linux-arm-kernel
Add PHY provider node for the DP PHY.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 41cd625..f7bac75 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -614,6 +614,12 @@
interrupts = <0 94 0>;
};
+ dp_phy: video-phy@10040720 {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ reg = <0x10040720 4>;
+ #phy-cells = <0>;
+ };
+
dp-controller {
compatible = "samsung,exynos5-dp";
reg = <0x145b0000 0x1000>;
@@ -623,11 +629,8 @@
clock-names = "dp";
#address-cells = <1>;
#size-cells = <0>;
-
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
+ phys = <&dp_phy 0>;
+ phy-names = "dp";
};
fimd {
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
2013-06-28 7:16 ` Jingoo Han
(?)
(?)
@ 2013-06-28 9:34 ` Felipe Balbi
-1 siblings, 0 replies; 7+ messages in thread
From: Felipe Balbi @ 2013-06-28 9:34 UTC (permalink / raw)
To: Jingoo Han
Cc: linux-arm-kernel, linux-samsung-soc,
'Kishon Vijay Abraham I',
linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
'Felipe Balbi', 'Tomasz Figa',
devicetree-discuss, 'Inki Dae', 'Donghwa Lee',
'Kyungmin Park',
'Jean-Christophe PLAGNIOL-VILLARD',
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1277 bytes --]
On Fri, Jun 28, 2013 at 04:16:44PM +0900, Jingoo Han wrote:
> Add PHY provider node for the DP PHY.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 41cd625..f7bac75 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -614,6 +614,12 @@
> interrupts = <0 94 0>;
> };
>
> + dp_phy: video-phy@10040720 {
> + compatible = "samsung,exynos5250-dp-video-phy";
> + reg = <0x10040720 4>;
> + #phy-cells = <0>;
> + };
> +
> dp-controller {
> compatible = "samsung,exynos5-dp";
> reg = <0x145b0000 0x1000>;
> @@ -623,11 +629,8 @@
> clock-names = "dp";
> #address-cells = <1>;
> #size-cells = <0>;
> -
> - dptx-phy {
> - reg = <0x10040720>;
> - samsung,enable-mask = <1>;
> - };
> + phys = <&dp_phy 0>;
phy-cells being 0, means that this would become:
phys = <&dp_phy>;
> + phy-names = "dp";
for the label, I would use something more descriptive such as
'display-port'.
other than that:
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
@ 2013-06-28 9:34 ` Felipe Balbi
0 siblings, 0 replies; 7+ messages in thread
From: Felipe Balbi @ 2013-06-28 9:34 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jun 28, 2013 at 04:16:44PM +0900, Jingoo Han wrote:
> Add PHY provider node for the DP PHY.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 41cd625..f7bac75 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -614,6 +614,12 @@
> interrupts = <0 94 0>;
> };
>
> + dp_phy: video-phy at 10040720 {
> + compatible = "samsung,exynos5250-dp-video-phy";
> + reg = <0x10040720 4>;
> + #phy-cells = <0>;
> + };
> +
> dp-controller {
> compatible = "samsung,exynos5-dp";
> reg = <0x145b0000 0x1000>;
> @@ -623,11 +629,8 @@
> clock-names = "dp";
> #address-cells = <1>;
> #size-cells = <0>;
> -
> - dptx-phy {
> - reg = <0x10040720>;
> - samsung,enable-mask = <1>;
> - };
> + phys = <&dp_phy 0>;
phy-cells being 0, means that this would become:
phys = <&dp_phy>;
> + phy-names = "dp";
for the label, I would use something more descriptive such as
'display-port'.
other than that:
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130628/fbda190c/attachment.sig>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
@ 2013-06-28 9:34 ` Felipe Balbi
0 siblings, 0 replies; 7+ messages in thread
From: Felipe Balbi @ 2013-06-28 9:34 UTC (permalink / raw)
To: linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 1277 bytes --]
On Fri, Jun 28, 2013 at 04:16:44PM +0900, Jingoo Han wrote:
> Add PHY provider node for the DP PHY.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 41cd625..f7bac75 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -614,6 +614,12 @@
> interrupts = <0 94 0>;
> };
>
> + dp_phy: video-phy@10040720 {
> + compatible = "samsung,exynos5250-dp-video-phy";
> + reg = <0x10040720 4>;
> + #phy-cells = <0>;
> + };
> +
> dp-controller {
> compatible = "samsung,exynos5-dp";
> reg = <0x145b0000 0x1000>;
> @@ -623,11 +629,8 @@
> clock-names = "dp";
> #address-cells = <1>;
> #size-cells = <0>;
> -
> - dptx-phy {
> - reg = <0x10040720>;
> - samsung,enable-mask = <1>;
> - };
> + phys = <&dp_phy 0>;
phy-cells being 0, means that this would become:
phys = <&dp_phy>;
> + phy-names = "dp";
for the label, I would use something more descriptive such as
'display-port'.
other than that:
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi
@ 2013-06-28 9:34 ` Felipe Balbi
0 siblings, 0 replies; 7+ messages in thread
From: Felipe Balbi @ 2013-06-28 9:34 UTC (permalink / raw)
To: Jingoo Han
Cc: linux-arm-kernel, linux-samsung-soc,
'Kishon Vijay Abraham I',
linux-media, 'Kukjin Kim', 'Sylwester Nawrocki',
'Felipe Balbi', 'Tomasz Figa',
devicetree-discuss, 'Inki Dae', 'Donghwa Lee',
'Kyungmin Park',
'Jean-Christophe PLAGNIOL-VILLARD',
linux-fbdev
[-- Attachment #1: Type: text/plain, Size: 1277 bytes --]
On Fri, Jun 28, 2013 at 04:16:44PM +0900, Jingoo Han wrote:
> Add PHY provider node for the DP PHY.
>
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 41cd625..f7bac75 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -614,6 +614,12 @@
> interrupts = <0 94 0>;
> };
>
> + dp_phy: video-phy@10040720 {
> + compatible = "samsung,exynos5250-dp-video-phy";
> + reg = <0x10040720 4>;
> + #phy-cells = <0>;
> + };
> +
> dp-controller {
> compatible = "samsung,exynos5-dp";
> reg = <0x145b0000 0x1000>;
> @@ -623,11 +629,8 @@
> clock-names = "dp";
> #address-cells = <1>;
> #size-cells = <0>;
> -
> - dptx-phy {
> - reg = <0x10040720>;
> - samsung,enable-mask = <1>;
> - };
> + phys = <&dp_phy 0>;
phy-cells being 0, means that this would become:
phys = <&dp_phy>;
> + phy-names = "dp";
for the label, I would use something more descriptive such as
'display-port'.
other than that:
Acked-by: Felipe Balbi <balbi@ti.com>
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-06-28 9:34 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-06-28 7:16 [PATCH V2 2/3] ARM: dts: Add DP PHY node to exynos5250.dtsi Jingoo Han
2013-06-28 7:16 ` Jingoo Han
2013-06-28 7:16 ` Jingoo Han
2013-06-28 9:34 ` Felipe Balbi
2013-06-28 9:34 ` Felipe Balbi
2013-06-28 9:34 ` Felipe Balbi
2013-06-28 9:34 ` Felipe Balbi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.