From: Fengguang Wu <fengguang.wu@intel.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>,
linux-kernel@vger.kernel.org,
Linus Torvalds <torvalds@linux-foundation.org>,
hpa@zytor.com
Subject: Re: [x86] BUG: unable to handle kernel paging request at 00740060
Date: Mon, 7 Oct 2013 19:32:48 +0800 [thread overview]
Message-ID: <20131007113248.GA1188@localhost> (raw)
In-Reply-To: <20131007090856.GS26785@twins.programming.kicks-ass.net>
On Mon, Oct 07, 2013 at 11:08:56AM +0200, Peter Zijlstra wrote:
> On Mon, Oct 07, 2013 at 10:55:33AM +0200, Peter Zijlstra wrote:
> > Wu, do you use the same compiler version for all the builds that crash
> > like this (I'm assuming the other email was this same commit)? Does a
> > different compiler make things work again?
>
> OK, so in a further email you say you use gcc-4.8.1 (which is actually
> newer than the one I used for most of the work although I do have it and
> tried it iirc).
Right. And I've got the boot result for gcc-4.6.3: the problem is
still there. Here is the qemu cmdline and new dmesg.
=============================================================================
cmd=(
qemu-system-x86_64 -cpu kvm64 -enable-kvm
-kernel $1
-initrd /kernel-tests/initrd/quantal-core-i386.cgz -m 256M -smp 2 -net nic,vlan=0,macaddr=00:00:00:00:00:00,model=virtio -net user,vlan=0,hostfwd=tcp::10661-:22
-net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot -watchdog i6300esb
-serial file:/dev/shm/serial-0day -daemonize -display none -monitor null
)
"${cmd[@]}" -append 'hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw'
=============================================================================
[ 0.000000] Linux version 3.12.0-rc1-00081-g6bfa687 (wfg@bee) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 Mon Oct 7 19:18:22 CST 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000fffe000-0x000000000fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xfffe max_arch_pfn = 0x1000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x029fffff]
[ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e400000-0x0e5fffff]
[ 0.000000] [mem 0x0e400000-0x0e5fffff] page 4k
[ 0.000000] BRK [0x020a7000, 0x020a7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x0c000000-0x0e3fffff]
[ 0.000000] [mem 0x0c000000-0x0e3fffff] page 4k
[ 0.000000] BRK [0x020a8000, 0x020a8fff] PGTABLE
[ 0.000000] BRK [0x020a9000, 0x020a9fff] PGTABLE
[ 0.000000] BRK [0x020aa000, 0x020aafff] PGTABLE
[ 0.000000] BRK [0x020ab000, 0x020abfff] PGTABLE
[ 0.000000] BRK [0x020ac000, 0x020acfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0bffffff]
[ 0.000000] [mem 0x00100000-0x0bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x0e600000-0x0fffdfff]
[ 0.000000] [mem 0x0e600000-0x0fffdfff] page 4k
[ 0.000000] log_buf_len: 8388608
[ 0.000000] early log buf free: 128876(98%)
[ 0.000000] RAMDISK: [mem 0x0e73f000-0x0ffeffff]
[ 0.000000] ACPI: RSDP 000f16b0 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0fffe3f0 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0fffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0fffe430 01137 (v01 BXPC BXDSDT 00000001 INTL 20100528)
[ 0.000000] ACPI: FACS 0fffff40 00040
[ 0.000000] ACPI: SSDT 0ffff6a0 00899 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 0ffff5b0 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0ffff570 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fffe000
[ 0.000000] low ram: 0 - 0fffe000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:fffd001, boot clock
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00001000-0x0fffdfff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x0fffdfff]
[ 0.000000] On node 0 totalpages: 65436
[ 0.000000] Normal zone: 576 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 65436 pages, LIFO batch:15
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 189e3c0
[ 0.000000] e820: [mem 0x10000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64860
[ 0.000000] Kernel command line: hung_task_panic=1 rcutree.rcu_cpu_stall_timeout=100 log_buf_len=8M ignore_loglevel debug sched_debug apic=debug dynamic_printk sysrq_always_enabled panic=10 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal root=/dev/ram0 rw
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 205852K/261744K available (6113K kernel code, 2123K rwdata, 2620K rodata, 460K init, 5644K bss, 55892K reserved)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffe2000 - 0xfffff000 ( 116 kB)
[ 0.000000] vmalloc : 0x907fe000 - 0xfffe0000 (1783 MB)
[ 0.000000] lowmem : 0x80000000 - 0x8fffe000 ( 255 MB)
[ 0.000000] .init : 0x81a9c000 - 0x81b0f000 ( 460 kB)
[ 0.000000] .data : 0x815f8a07 - 0x81a9bf40 (4749 kB)
[ 0.000000] .text : 0x81000000 - 0x815f8a07 (6114 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] CPU 0 irqstacks, hard=80090000 soft=80092000
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3823 kB
[ 0.000000] per task-struct memory footprint: 1920 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000] ----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok | ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok | ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok | | ok |
[ 0.000000] recursive read-lock #2: | ok | | ok |
[ 0.000000] mixed read-write-lock: | ok | | ok |
[ 0.000000] mixed write-read-lock: | ok | | ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000] --------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.508 MHz processor
[ 0.020000] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=26935080)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] Mount-cache hash table entries: 512
[ 0.020000] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.020000] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.020000] tlb_flushall_shift: 6
[ 0.020000] CPU: Intel Common KVM processor (fam: 0f, model: 06, stepping: 01)
[ 0.022956] ACPI: Core revision 20130725
[ 0.033753] ACPI: All ACPI Tables successfully acquired
[ 0.034763] ACPI: setting ELCR to 0200 (from 0c00)
[ 0.035542] ftrace: allocating 23377 entries in 46 pages
[ 0.050381] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.060067] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.064402] regulator-dummy: no parameters
[ 0.065415] NET: Registered protocol family 16
[ 0.067278] cpuidle: using governor ladder
[ 0.067735] cpuidle: using governor menu
[ 0.068404] ACPI: bus type PCI registered
[ 0.069307] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.070013] PCI: PCI BIOS revision 2.10 entry at 0xfd4e3, last bus=0
[ 0.071070] PCI: Using configuration type 1 for base access
[ 0.089117] ACPI: Added _OSI(Module Device)
[ 0.089881] ACPI: Added _OSI(Processor Device)
[ 0.090012] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.090631] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.096178] ACPI: EC: Look up EC in DSDT
[ 0.115838] ACPI: Interpreter enabled
[ 0.116581] ACPI: (supports S0 S5)
[ 0.117112] ACPI: Using PIC for interrupt routing
[ 0.117834] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.151281] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.152335] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.154411] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.156177] PCI host bridge to bus 0000:00
[ 0.156847] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.157399] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.158287] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.159220] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.160016] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.161196] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.163474] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.165825] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.170626] pci 0000:00:01.1: reg 0x20: [io 0xc060-0xc06f]
[ 0.174069] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.175269] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.176544] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.178543] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.181660] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.190077] pci 0000:00:02.0: reg 0x14: [mem 0xfebe2000-0xfebe2fff]
[ 0.211824] pci 0000:00:02.0: reg 0x30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.214279] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
[ 0.216819] pci 0000:00:03.0: reg 0x10: [io 0xc040-0xc05f]
[ 0.222049] pci 0000:00:03.0: reg 0x14: [mem 0xfebe1000-0xfebe1fff]
[ 0.234052] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[ 0.237266] pci 0000:00:04.0: [8086:100e] type 00 class 0x020000
[ 0.240938] pci 0000:00:04.0: reg 0x10: [mem 0xfeb80000-0xfeb9ffff]
[ 0.244141] pci 0000:00:04.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.254919] pci 0000:00:04.0: reg 0x30: [mem 0xfeba0000-0xfebbffff pref]
[ 0.257620] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 0.259920] pci 0000:00:05.0: reg 0x10: [mem 0xfebe0000-0xfebe000f]
[ 0.267967] pci_bus 0000:00: on NUMA node 0
[ 0.274378] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.276511] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.278551] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.281169] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.282831] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.286803] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.287851] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.289291] Found 1 acpi root devices
[ 0.292095] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293693] vgaarb: loaded
[ 0.294274] vgaarb: bridge control possible 0000:00:02.0
[ 0.296221] ACPI: bus type USB registered
[ 0.297194] usbcore: registered new interface driver usbfs
[ 0.298419] usbcore: registered new interface driver hub
[ 0.299362] usbcore: registered new device driver usb
[ 0.300475] pps_core: LinuxPPS API ver. 1 registered
[ 0.301594] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.303433] PTP clock support registered
[ 0.304427] EDAC MC: Ver: 3.0.0
[ 0.305686] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[ 0.307907] Advanced Linux Sound Architecture Driver Initialized.
[ 0.308508] PCI: Using ACPI for IRQ routing
[ 0.308981] PCI: pci_cache_line_size set to 64 bytes
[ 0.310078] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.310735] e820: reserve RAM buffer [mem 0x0fffe000-0x0fffffff]
[ 0.313883] Switched to clocksource kvm-clock
[ 0.316615] Warning: could not register annotated branches stats
[ 0.347872] pnp: PnP ACPI init
[ 0.348235] ACPI: bus type PNP registered
[ 0.348796] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.349532] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.350357] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.352097] pnp 00:03: [dma 2]
[ 0.352938] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.353730] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.355281] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.358842] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.360334] pnp: PnP ACPI: found 7 devices
[ 0.361242] ACPI: bus type PNP unregistered
[ 0.397904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.398452] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.398969] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.399547] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.400137] NET: Registered protocol family 1
[ 0.400616] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.401210] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.401780] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.402380] pci 0000:00:02.0: Boot video device
[ 0.402849] PCI: CLS 0 bytes, default 64
[ 0.403593] Unpacking initramfs...
[ 4.037222] debug: unmapping init [mem 0x8e73f000-0x8ffeffff]
[ 5.080498] DMA-API: preallocated 65536 debug entries
[ 5.081150] DMA-API: debugging enabled by kernel config
[ 5.085943] microcode: CPU0 sig=0xf61, pf=0x1, revision=0x1
[ 5.088639] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.090438] Scanning for low memory corruption every 60 seconds
[ 5.092318] cryptomgr_test (14) used greatest stack depth: 7244 bytes left
[ 5.095634] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[ 5.097722] NatSemi SCx200 Driver
[ 5.106939] VFS: Disk quotas dquot_6.5.2
[ 5.107857] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.111720] jffs2: version 2.2. © 2001-2006 Red Hat, Inc.
[ 5.113153] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 5.114072] fuse init (API version 7.22)
[ 5.117217] msgmni has been set to 402
[ 5.125805] Key type asymmetric registered
[ 5.126822] Asymmetric key parser 'x509' registered
[ 5.136605] list_sort_test: start testing list_sort()
[ 5.141321] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[ 5.142401] crc32: self tests passed, processed 225944 bytes in 637724 nsec
[ 5.144315] crc32c: CRC_LE_BITS = 32
[ 5.145010] crc32c: self tests passed, processed 225944 bytes in 141853 nsec
[ 5.146590] rbtree testing -> 12500 cycles
[ 5.698682] augmented rbtree testing -> 24366 cycles
[ 6.715342] tsc: Refined TSC clocksource calibration: 2693.464 MHz
[ 6.717936] no IO addresses supplied
[ 6.718461] hgafb: HGA card not detected.
[ 6.718854] hgafb: probe of hgafb.0 failed with error -22
[ 6.719562] usbcore: registered new interface driver udlfb
[ 6.720114] ipmi message handler version 39.2
[ 6.720535] ipmi device interface
[ 6.722655] IPMI System Interface driver.
[ 6.723154] ipmi_si: Adding default-specified kcs state machine
[ 6.723716] ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 6.724648] ipmi_si: Interface detection failed
[ 6.725083] ipmi_si: Adding default-specified smic state machine
[ 6.725647] ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
[ 6.726785] ipmi_si: Interface detection failed
[ 6.727203] ipmi_si: Adding default-specified bt state machine
[ 6.727907] ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
[ 6.729406] ipmi_si: Interface detection failed
[ 6.730062] ipmi_si: Unable to find any System Interface(s)
[ 6.730593] IPMI Watchdog: driver initialized
[ 6.730991] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[ 6.732068] IPMI poweroff: Unable to register powercycle sysctl
[ 6.733295] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 6.734592] ACPI: Power Button [PWRF]
[ 6.736427] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 6.737171] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 6.760425] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 6.772174] lp: driver loaded but no devices found
[ 6.772838] DoubleTalk PC - not found
[ 6.773770] Non-volatile memory driver v1.3
[ 6.774655] toshiba: not a supported Toshiba laptop
[ 6.775966] ppdev: user-space parallel port driver
[ 6.777839] scx200_gpio: no SCx200 gpio present
[ 6.779303] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 6.781027] platform pc8736x_gpio.0: no device found
[ 6.782029] nsc_gpio initializing
[ 6.782769] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 6.783853] smapi::smapi_init, ERROR invalid usSmapiID
[ 6.784860] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[ 6.787469] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[ 6.788739] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 6.789307] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 6.790493] Hangcheck: Using getrawmonotonic().
[ 6.792391] dummy-irq: no IRQ given. Use irq=N
[ 6.794921] usbcore: registered new interface driver viperboard
[ 6.799656] Failed to ioremap_nocache
[ 6.800616] slram: not enough parameters.
[ 6.835859] No valid DiskOnChip devices found
[ 6.837874] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 6.839561] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 6.841425] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 6.843027] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 6.844641] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 6.846607] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[ 6.848421] NAND device: Manufacturer ID: 0x98, Chip ID: 0x39 (Toshiba NAND 128MiB 1,8V 8-bit), 128MiB, page size: 512, OOB size: 16
[ 6.850970] flash size: 128 MiB
[ 6.851645] page size: 512 bytes
[ 6.852276] OOB area size: 16 bytes
[ 6.853007] sector size: 16 KiB
[ 6.853667] pages number: 262144
[ 6.854345] pages per sector: 32
[ 6.855024] bus width: 8
[ 6.855555] bits in sector size: 14
[ 6.855880] bits in page size: 9
[ 6.856382] bits in OOB size: 4
[ 6.856681] flash size with OOB: 135168 KiB
[ 6.857063] page address bytes: 4
[ 6.857369] sector address bytes: 3
[ 6.858084] options: 0x42
[ 6.861585] Scanning device for bad blocks
[ 6.928354] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 6.928983] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[ 6.933140] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[ 6.933804] usbcore: registered new interface driver cdc_wdm
[ 6.934363] usbcore: registered new interface driver mdc800
[ 6.934881] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 6.938836] usbcore: registered new interface driver usbserial
[ 6.939449] usbcore: registered new interface driver aircable
[ 6.940069] usbserial: USB Serial support registered for aircable
[ 6.940900] usbcore: registered new interface driver belkin_sa
[ 6.942417] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 6.943755] usbcore: registered new interface driver ch341
[ 6.944319] usbserial: USB Serial support registered for ch341-uart
[ 6.944926] usbcore: registered new interface driver cyberjack
[ 6.945599] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[ 6.946888] usbcore: registered new interface driver usb_debug
[ 6.947601] usbserial: USB Serial support registered for debug
[ 6.948202] usbcore: registered new interface driver digi_acceleport
[ 6.949240] usbserial: USB Serial support registered for Digi 2 port USB adapter
[ 6.949950] usbserial: USB Serial support registered for Digi 4 port USB adapter
[ 6.950651] usbcore: registered new interface driver io_ti
[ 6.951255] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[ 6.952094] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[ 6.952909] usbcore: registered new interface driver f81232
[ 6.953448] usbserial: USB Serial support registered for f81232
[ 6.954221] usbcore: registered new interface driver ftdi_sio
[ 6.954999] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 6.956307] usbcore: registered new interface driver ipaq
[ 6.956954] usbserial: USB Serial support registered for PocketPC PDA
[ 6.957642] usbcore: registered new interface driver ir_usb
[ 6.958262] usbserial: USB Serial support registered for IR Dongle
[ 6.959048] usbcore: registered new interface driver iuu_phoenix
[ 6.959625] usbserial: USB Serial support registered for iuu_phoenix
[ 6.960271] usbcore: registered new interface driver keyspan
[ 6.961145] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 6.962165] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 6.963371] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 6.964267] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 6.965995] usbcore: registered new interface driver kl5kusb105
[ 6.967858] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[ 6.971077] usbcore: registered new interface driver kobil_sct
[ 6.972422] usbserial: USB Serial support registered for KOBIL USB smart card terminal
[ 6.974546] usbcore: registered new interface driver mos7720
[ 6.975164] usbserial: USB Serial support registered for Moschip 2 port adapter
[ 6.975878] usbcore: registered new interface driver mos7840
[ 6.977411] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[ 6.981304] usbcore: registered new interface driver navman
[ 6.982617] usbserial: USB Serial support registered for navman
[ 6.983311] usbcore: registered new interface driver omninet
[ 6.983855] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 6.985640] usbcore: registered new interface driver opticon
[ 6.986735] usbserial: USB Serial support registered for opticon
[ 6.990513] usbcore: registered new interface driver oti6858
[ 6.992070] usbserial: USB Serial support registered for oti6858
[ 6.992687] usbcore: registered new interface driver qcaux
[ 6.993360] usbserial: USB Serial support registered for qcaux
[ 6.994325] usbcore: registered new interface driver qcserial
[ 6.995046] usbserial: USB Serial support registered for Qualcomm USB modem
[ 6.998341] usbcore: registered new interface driver quatech2
[ 6.999933] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[ 7.000758] usbcore: registered new interface driver safe_serial
[ 7.001503] usbserial: USB Serial support registered for safe_serial
[ 7.002777] usbcore: registered new interface driver sierra
[ 7.004519] usbserial: USB Serial support registered for Sierra USB modem
[ 7.008017] usbcore: registered new interface driver usb_serial_simple
[ 7.008722] usbserial: USB Serial support registered for zio
[ 7.009291] usbserial: USB Serial support registered for funsoft
[ 7.009929] usbserial: USB Serial support registered for flashloader
[ 7.010672] usbserial: USB Serial support registered for vivopay
[ 7.011616] usbserial: USB Serial support registered for moto_modem
[ 7.012365] usbserial: USB Serial support registered for hp4x
[ 7.012941] usbserial: USB Serial support registered for suunto
[ 7.014066] usbserial: USB Serial support registered for siemens_mpi
[ 7.015277] usbcore: registered new interface driver spcp8x5
[ 7.016693] usbserial: USB Serial support registered for SPCP8x5
[ 7.017729] usbcore: registered new interface driver symbolserial
[ 7.018690] usbserial: USB Serial support registered for symbol
[ 7.019315] usbcore: registered new interface driver visor
[ 7.020082] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 7.020862] usbserial: USB Serial support registered for Sony Clie 5.0
[ 7.021490] usbserial: USB Serial support registered for Sony Clie 3.5
[ 7.024603] usbcore: registered new interface driver whiteheat
[ 7.025516] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[ 7.028060] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[ 7.029654] usbcore: registered new interface driver keyspan_pda
[ 7.030675] usbserial: USB Serial support registered for Keyspan PDA
[ 7.031754] usbserial: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
[ 7.035509] usbcore: registered new interface driver xsens_mt
[ 7.037315] usbserial: USB Serial support registered for xsens_mt
[ 7.038572] usbcore: registered new interface driver zte_ev
[ 7.040254] usbserial: USB Serial support registered for zte_ev
[ 7.041317] usbcore: registered new interface driver adutux
[ 7.042927] usbcore: registered new interface driver appledisplay
[ 7.044247] usbcore: registered new interface driver cytherm
[ 7.045644] usbcore: registered new interface driver emi26 - firmware loader
[ 7.047358] usbcore: registered new interface driver emi62 - firmware loader
[ 7.049752] usbcore: registered new interface driver idmouse
[ 7.051044] usbcore: registered new interface driver iowarrior
[ 7.051606] usbcore: registered new interface driver isight_firmware
[ 7.052732] usbcore: registered new interface driver usbled
[ 7.054223] usbcore: registered new interface driver rio500
[ 7.055721] usbcore: registered new interface driver trancevibrator
[ 7.057825] usbcore: registered new interface driver uss720
[ 7.058790] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[ 7.061093] uss720: NOTE: this is a special purpose driver to allow nonstandard
[ 7.062279] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[ 7.062924] uss720: If you just want to connect to a printer, use usblp instead
[ 7.064435] usbcore: registered new interface driver usbsevseg
[ 7.067683] userial_init: registered 4 ttyGS* devices
[ 7.068486] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 7.071996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.073187] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 7.077874] usbcore: registered new interface driver appletouch
[ 7.078461] usbcore: registered new interface driver bcm5974
[ 7.079722] logibm.c: Didn't find Logitech busmouse at 0x23c
[ 7.085490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 7.090318] usbcore: registered new interface driver xpad
[ 7.094526] usbcore: registered new interface driver ati_remote2
[ 7.095547] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 7.103015] usbcore: registered new interface driver cm109
[ 7.104744] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 7.106135] usbcore: registered new interface driver ims_pcu
[ 7.112730] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.114002] usbcore: registered new interface driver powermate
[ 7.114959] wistron_btns: System unknown
[ 7.115359] ideapad_slidebar: DMI does not match
[ 7.115818] i2c /dev entries driver
[ 7.119698] i2c-parport-light: adapter type unspecified
[ 7.121505] usbcore: registered new interface driver i2c-tiny-usb
[ 7.125950] scx200_i2c: no SCx200 gpio pins available
[ 7.126718] pps_ldisc: PPS line discipline registered
[ 7.127184] pps_parport: parallel port PPS client
[ 7.127645] Driver for 1-wire Dallas network protocol.
[ 7.129758] usbcore: registered new interface driver DS9490R
[ 7.131783] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[ 7.136990] applesmc: supported laptop not found!
[ 7.137441] applesmc: driver init failed (ret=-19)!
[ 7.150470] intel_powerclamp: Intel powerclamp does not run on family 15 model 6
[ 7.152116] mixcomwd: No card detected, or port not available
[ 7.152815] usbcore: registered new interface driver pcwd_usb
[ 7.154245] acquirewdt: WDT driver for Acquire single board computer initialising
[ 7.155369] acquirewdt: I/O address 0x0043 already in use
[ 7.155953] acquirewdt: probe of acquirewdt failed with error -5
[ 7.158166] sc1200wdt: build 20020303
[ 7.161698] sc1200wdt: io parameter must be specified
[ 7.162908] pc87413_wdt: Version 1.1 at io 0x2E
[ 7.166079] pc87413_wdt: initialized. timeout=1 min
[ 7.167339] pc87413_wdt: cannot request SWC region at 0xffff
[ 7.169083] sbc8360: Timeout set at 60000 ms
[ 7.169810] w83627hf_wdt: WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising
[ 7.171547] w83627hf_wdt: Watchdog already running. Resetting timeout to 60 sec
[ 7.172885] w83627hf_wdt: cannot register miscdev on minor=130 (err=-16)
[ 7.173890] w83697ug_wdt: WDT driver for the Winbond(TM) W83697UG/UF Super I/O chip initialising
[ 7.174782] w83697ug_wdt: No W83697UG/UF could be found
[ 7.175302] w83977f_wdt: driver v1.00
[ 7.176042] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[ 7.177472] machzwd: MachZ ZF-Logic Watchdog driver initializing
[ 7.178627] machzwd: no ZF-Logic found
[ 7.179455] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 7.180528] wbsd: Copyright(c) Pierre Ossman
[ 7.181105] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 7.185276] usbcore: registered new interface driver vub300
[ 7.187240] usbcore: registered new interface driver ushc
[ 7.193051] ledtrig-cpu: registered to indicate activity on CPUs
[ 7.197787] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.212856] usbcore: registered new interface driver usbhid
[ 7.214049] usbhid: USB HID core driver
[ 7.216540] goldfish_pdev_bus goldfish_pdev_bus: unable to reserve Goldfish MMIO.
[ 7.217947] goldfish_pdev_bus: probe of goldfish_pdev_bus failed with error -16
[ 7.235804] fake-fmc-carrier: mezzanine 0
[ 7.236506] Manufacturer: fake-vendor
[ 7.237148] Product name: fake-design-for-testing
[ 7.238295] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[ 7.239607] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95
[ 7.240862] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[ 7.242270] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001"
[ 7.251115] usbcore: registered new interface driver snd-usb-audio
[ 7.252042] usbcore: registered new interface driver snd-ua101
[ 7.253244] usbcore: registered new interface driver snd-usb-usx2y
[ 7.254467] usbcore: registered new interface driver snd-usb-caiaq
[ 7.255764] usbcore: registered new interface driver snd-usb-6fire
[ 7.271905] ALSA device list:
[ 7.272233] No soundcards found.
[ 7.273917] debug: unmapping init [mem 0x81a9c000-0x81b0efff]
[ 7.275030] Write protecting the kernel text: 6116k
[ 7.275992] Write protecting the kernel read-only data: 2624k
[ 7.277371] NX-protecting the kernel data: 6172k
[ 7.330701] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 7.331718] IP: [< (null)>] (null)
[ 7.332189] *pdpt = 00000000072f0001 *pde = 0000000000000000
[ 7.332946] Oops: 0010 [#1] DEBUG_PAGEALLOC
[ 7.333507] CPU: 0 PID: 84 Comm: rc.local Not tainted 3.12.0-rc1-00081-g6bfa687 #1
[ 7.334828] task: 872fa000 ti: 872fc000 task.ti: 872fc000
[ 7.335776] EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0
[ 7.336128] EIP is at 0x0
[ 7.336128] EAX: 82078134 EBX: 872e5780 ECX: 00000000 EDX: 82078134
[ 7.336128] ESI: 872fa000 EDI: 872fa388 EBP: 872fdf9c ESP: 872fdf8c
[ 7.336128] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 7.336128] CR0: 8005003b CR2: 00000000 CR3: 072e6000 CR4: 000006b0
[ 7.336128] Stack:
[ 7.336128] 810545c9 00000001 77edff58 776efff4 872fdfac 81002358 00000000 77ef6903
[ 7.336128] 872fc000 815f74a0 00000000 00000000 00000000 00000000 00000000 00000000
[ 7.336128] 00000000 0000007b 0000007b 00000000 00000000 0000000b 777951d0 00000073
[ 7.336128] Call Trace:
[ 7.336128] [<810545c9>] ? task_work_run+0x79/0xb0
[ 7.336128] [<81002358>] do_notify_resume+0x58/0x70
[ 7.336128] [<815f74a0>] work_notifysig+0x2b/0x3b
[ 7.336128] Code: Bad EIP value.
[ 7.336128] EIP: [<00000000>] 0x0 SS:ESP 0068:872fdf8c
[ 7.336128] CR2: 0000000000000000
[ 7.350759] ---[ end trace c4767ad881866043 ]---
[ 7.362185] BUG: unable to handle kernel paging request at 01ce0060
[ 7.363460] IP: [<810545a4>] task_work_run+0x54/0xb0
[ 7.364454] *pdpt = 00000000072d6001 *pde = 0000000000000000
[ 7.365574] Oops: 0000 [#2] DEBUG_PAGEALLOC
[ 7.366102] CPU: 0 PID: 85 Comm: hostname Tainted: G D 3.12.0-rc1-00081-g6bfa687 #1
[ 7.366102] task: 872fe000 ti: 87300000 task.ti: 87300000
[ 7.366102] EIP: 0060:[<810545a4>] EFLAGS: 00010206 CPU: 0
[ 7.366102] EIP is at task_work_run+0x54/0xb0
[ 7.366102] EAX: 01ce0060 EBX: 872ef280 ECX: 00000000 EDX: 01ce0060
[ 7.366102] ESI: 872fe000 EDI: 872fe388 EBP: 87301f3c ESP: 87301f30
[ 7.366102] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 7.366102] CR0: 8005003b CR2: 01ce0060 CR3: 072d1000 CR4: 000006b0
[ 7.366102] Stack:
[ 7.366102] ffffffff 872e9580 872fe000 87301f8c 8103a03a 00000014 775fcfb8 8105b4ab
[ 7.366102] 00000000 87301fac 00000001 00000015 61636f6c 736f686c 6f6c2e74 872e95d8
[ 7.366102] 69616d6f 872e956e 872e95d8 00000000 00000000 872e9000 872fe000 87301fa4
[ 7.366102] Call Trace:
[ 7.366102] [<8103a03a>] do_exit+0x2aa/0x920
[ 7.366102] [<8105b4ab>] ? up_write+0x1b/0x30
[ 7.366102] [<8103a742>] do_group_exit+0x52/0xb0
[ 7.366102] [<8103a7b8>] SyS_exit_group+0x18/0x20
[ 7.366102] [<815f7a10>] sysenter_do_call+0x12/0x3c
[ 7.366102] Code: 36 31 c9 89 d0 0f b1 0f 39 c2 75 eb 85 d2 74 67 8d b4 26 00 00 00 00 f3 90 8b 86 c0 03 00 00 85 c0 74 f4 31 db eb 04 89 d3 89 c2 <8b> 02 89 1a 85 c0 75 f4 eb 16 66 90 f6 46 0c 04 74 c4 b9 04 f0
[ 7.366102] EIP: [<810545a4>] task_work_run+0x54/0xb0 SS:ESP 0068:87301f30
[ 7.366102] CR2: 0000000001ce0060
[ 7.394265] ---[ end trace c4767ad881866044 ]---
[ 7.395167] Fixing recursive fault but reboot is needed!
next prev parent reply other threads:[~2013-10-07 11:32 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-05 23:44 [x86] BUG: unable to handle kernel paging request at 00740060 Fengguang Wu
2013-10-05 23:47 ` [x86] BUG: unable to handle kernel paging request at 08000060 Fengguang Wu
2013-10-06 7:27 ` Mike Galbraith
2013-10-06 7:36 ` Fengguang Wu
2013-10-07 8:49 ` Peter Zijlstra
2013-10-07 9:17 ` Fengguang Wu
2013-10-07 9:36 ` Peter Zijlstra
2013-10-07 9:46 ` Fengguang Wu
2013-10-07 8:55 ` [x86] BUG: unable to handle kernel paging request at 00740060 Peter Zijlstra
2013-10-07 9:08 ` Peter Zijlstra
2013-10-07 11:32 ` Fengguang Wu [this message]
2013-10-07 9:27 ` Fengguang Wu
2013-10-07 18:47 ` Linus Torvalds
2013-10-08 7:51 ` Fengguang Wu
2013-10-08 16:21 ` Linus Torvalds
2013-10-08 17:15 ` [x86] BUG: unable to handle kernel NULL pointer dereference at (null) Fengguang Wu
2013-10-08 17:31 ` Linus Torvalds
2013-10-09 1:09 ` Fengguang Wu
2013-10-09 1:33 ` Linus Torvalds
2013-10-08 18:51 ` [x86] BUG: unable to handle kernel paging request at 00740060 Oleg Nesterov
2013-10-08 19:05 ` Jakub Jelinek
2013-10-08 19:20 ` Linus Torvalds
2013-10-08 19:34 ` Linus Torvalds
2013-10-08 19:35 ` Oleg Nesterov
2013-10-08 19:49 ` Linus Torvalds
2013-10-09 1:43 ` Mike Galbraith
2013-10-08 19:05 ` Linus Torvalds
2013-10-08 16:46 ` Oleg Nesterov
2013-10-08 14:34 ` Oleg Nesterov
2013-10-09 8:04 ` Fengguang Wu
2013-10-09 12:19 ` Fengguang Wu
2013-10-09 12:21 ` Fengguang Wu
2013-10-09 12:27 ` Peter Zijlstra
2013-10-09 12:52 ` Ingo Molnar
2013-10-09 17:18 ` Ingo Molnar
2013-10-10 2:15 ` Mike Galbraith
2013-10-09 12:56 ` Fengguang Wu
2013-10-09 12:43 ` Oleg Nesterov
2013-10-09 14:07 ` Peter Zijlstra
2013-10-09 14:17 ` Oleg Nesterov
2013-10-09 14:32 ` Ingo Molnar
2013-10-09 14:33 ` Peter Zijlstra
2013-10-09 14:46 ` Peter Zijlstra
2013-10-09 18:16 ` Jakub Jelinek
2013-10-09 18:54 ` Linus Torvalds
2013-10-09 19:02 ` Peter Zijlstra
2013-10-09 19:08 ` Jakub Jelinek
2013-10-10 6:22 ` Ingo Molnar
2013-10-10 6:51 ` Jakub Jelinek
2013-10-10 8:04 ` Jakub Jelinek
2013-10-10 8:24 ` [PATCH] gcc4: Add 'asm goto' miscompilation quirk Ingo Molnar
2013-10-10 8:31 ` Jakub Jelinek
2013-10-10 8:45 ` Ingo Molnar
2013-10-10 8:55 ` [PATCH, -v2] compiler/gcc4: Add quirk for 'asm goto' miscompilation bug Ingo Molnar
2013-10-10 11:56 ` Peter Zijlstra
2013-10-10 12:32 ` Jakub Jelinek
2013-10-10 13:10 ` Peter Zijlstra
2013-10-10 15:04 ` Ingo Molnar
2013-10-10 14:04 ` [PATCH] gcc4: Add 'asm goto' miscompilation quirk Richard Henderson
2013-10-10 14:27 ` Jakub Jelinek
2013-10-10 15:12 ` [PATCH, -v3] compiler/gcc4: Add quirk for 'asm goto' miscompilation bug Ingo Molnar
2013-10-10 16:15 ` Richard Henderson
2013-10-10 16:49 ` Ingo Molnar
2013-10-11 4:35 ` Fengguang Wu
2013-10-11 5:46 ` Ingo Molnar
2013-10-11 6:51 ` Fengguang Wu
2013-10-11 9:30 ` Fengguang Wu
2013-10-12 17:03 ` Ingo Molnar
2013-10-10 8:34 ` [PATCH] gcc4: Add 'asm goto' miscompilation quirk Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131007113248.GA1188@localhost \
--to=fengguang.wu@intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.