All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 00/16] PCI generic configuration space accessors
Date: Thu, 22 Jan 2015 21:03:44 +0000	[thread overview]
Message-ID: <20150122210344.GE13072@google.com> (raw)
In-Reply-To: <1420857290-8373-1-git-send-email-robh@kernel.org>

On Fri, Jan 09, 2015 at 08:34:34PM -0600, Rob Herring wrote:
> This series adds common accessor functions for PCI configuration space
> accesses. This supports most PCI hosts with memory mapped configuration
> space like ECAM or hosts with memory mapped address/data registers. ECAM
> is not generically supported by this series, but could be added on top
> of this. While some hosts have standard address decoding which could be 
> common as well, the various checks on bus numbers and device numbers are 
> quite varied. It is unclear how much of that is really necessary or 
> could be common. 
> 
> The first 4 patches are preparatory cleanup. Patch 5 introduces the
> common accessors. The remaining patches convert several PCI host
> controllers. This is in no way a complete list of host controllers. The
> conversion of more hosts should be possible. The Designware controller
> in particular should be able to be converted, but its config space
> accessors are a mess of override-able functions that I've not gotten my
> head around.
> 
> This series is available here [1].
> 
> Rob
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git pci-config-access
> 
> Rob Herring (16):
>   frv: add struct pci_ops member names to initialization
>   mips: add struct pci_ops member names to initialization
>   mn10300: add struct pci_ops member names to initialization
>   powerpc: add struct pci_ops member names to initialization
>   pci: introduce common pci config space accessors
>   ARM: cns3xxx: convert PCI to use generic config accesses
>   ARM: integrator: convert PCI to use generic config accesses
>   ARM: sa1100: convert PCI to use generic config accesses
>   ARM: ks8695: convert PCI to use generic config accesses
>   powerpc: fsl_pci: convert PCI to use generic config accesses
>   powerpc: powermac: convert PCI to use generic config accesses
>   pci/host: generic: convert to use generic config accesses
>   pci/host: rcar-gen2: convert to use generic config accesses
>   pci/host: tegra: convert to use generic config accesses
>   pci/host: xgene: convert to use generic config accesses
>   pci/host: xilinx: convert to use generic config accesses
> 
>  arch/arm/mach-cns3xxx/pcie.c                   |  52 ++----
>  arch/arm/mach-integrator/pci_v3.c              |  61 +-------
>  arch/arm/mach-ks8695/pci.c                     |  77 +--------
>  arch/arm/mach-sa1100/pci-nanoengine.c          |  94 +----------
>  arch/frv/mb93090-mb00/pci-vdk.c                |   4 +-
>  arch/mips/pci/pci-bcm1480.c                    |   4 +-
>  arch/mips/pci/pci-octeon.c                     |   4 +-
>  arch/mips/pci/pcie-octeon.c                    |  12 +-
>  arch/mn10300/unit-asb2305/pci.c                |   4 +-
>  arch/powerpc/platforms/cell/celleb_scc_pciex.c |   4 +-
>  arch/powerpc/platforms/powermac/pci.c          | 209 +++++--------------------
>  arch/powerpc/sysdev/fsl_pci.c                  |  46 +-----
>  drivers/pci/access.c                           |  87 ++++++++++
>  drivers/pci/host/pci-host-generic.c            |  51 +-----
>  drivers/pci/host/pci-rcar-gen2.c               |  51 +-----
>  drivers/pci/host/pci-tegra.c                   |  55 +------
>  drivers/pci/host/pci-xgene.c                   | 150 ++----------------
>  drivers/pci/host/pcie-xilinx.c                 |  88 ++---------
>  include/linux/pci.h                            |  11 ++
>  19 files changed, 212 insertions(+), 852 deletions(-)

Really nice cleanups.  I added these with the acks so far to a pci/config
branch for v3.20.  I'll update it with more acks if they trickle in.

You've structured it nicely so I can also just drop individual arch pieces
if necessary.  The pieces that haven't been acked yet (hint, hint):

    arch/arm/mach-cns3xxx/pcie.c
    arch/arm/mach-sa1100/pci-nanoengine.c
    arch/mn10300/unit-asb2305/pci.c
    arch/powerpc

In addition, nobody has acked the frv and mips parts, but they're trivial
(they only add struct member names) that I can apply them without worrying.

Bjorn

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <bhelgaas@google.com>
To: Rob Herring <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org, "Arnd Bergmann" <arnd@arndb.de>,
	linux-pci@vger.kernel.org, "Alexandre Courbot" <gnurou@gmail.com>,
	"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
	"David Howells" <dhowells@redhat.com>,
	"Greg Ungerer" <gerg@uclinux.org>,
	"Koichi Yasutake" <yasutake.koichi@jp.panasonic.com>,
	"Krzysztof Halasa" <khalasa@piap.pl>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Michael Ellerman" <mpe@ellerman.id.au>,
	"Michal Simek" <michal.simek@xilinx.com>,
	"Paul Mackerras" <paulus@samba.org>,
	"Ralf Baechle" <ralf@linux-mips.org>,
	"Russell King" <linux@arm.linux.org.uk>,
	"Simon Horman" <horms@verge.net.au>,
	"Sören Brinkmann" <soren.brinkmann@xilinx.com>,
	"Stephen Warren" <swarren@wwwdotorg.org>,
	"Tanmay Inamdar" <tinamdar@apm.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Will Deacon" <will.deacon@arm.com>,
	cbe-oss-dev@lists.ozlabs.org, linux-am33-list@redhat.com
Subject: Re: [PATCH 00/16] PCI generic configuration space accessors
Date: Thu, 22 Jan 2015 15:03:44 -0600	[thread overview]
Message-ID: <20150122210344.GE13072@google.com> (raw)
In-Reply-To: <1420857290-8373-1-git-send-email-robh@kernel.org>

On Fri, Jan 09, 2015 at 08:34:34PM -0600, Rob Herring wrote:
> This series adds common accessor functions for PCI configuration space
> accesses. This supports most PCI hosts with memory mapped configuration
> space like ECAM or hosts with memory mapped address/data registers. ECAM
> is not generically supported by this series, but could be added on top
> of this. While some hosts have standard address decoding which could be 
> common as well, the various checks on bus numbers and device numbers are 
> quite varied. It is unclear how much of that is really necessary or 
> could be common. 
> 
> The first 4 patches are preparatory cleanup. Patch 5 introduces the
> common accessors. The remaining patches convert several PCI host
> controllers. This is in no way a complete list of host controllers. The
> conversion of more hosts should be possible. The Designware controller
> in particular should be able to be converted, but its config space
> accessors are a mess of override-able functions that I've not gotten my
> head around.
> 
> This series is available here [1].
> 
> Rob
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git pci-config-access
> 
> Rob Herring (16):
>   frv: add struct pci_ops member names to initialization
>   mips: add struct pci_ops member names to initialization
>   mn10300: add struct pci_ops member names to initialization
>   powerpc: add struct pci_ops member names to initialization
>   pci: introduce common pci config space accessors
>   ARM: cns3xxx: convert PCI to use generic config accesses
>   ARM: integrator: convert PCI to use generic config accesses
>   ARM: sa1100: convert PCI to use generic config accesses
>   ARM: ks8695: convert PCI to use generic config accesses
>   powerpc: fsl_pci: convert PCI to use generic config accesses
>   powerpc: powermac: convert PCI to use generic config accesses
>   pci/host: generic: convert to use generic config accesses
>   pci/host: rcar-gen2: convert to use generic config accesses
>   pci/host: tegra: convert to use generic config accesses
>   pci/host: xgene: convert to use generic config accesses
>   pci/host: xilinx: convert to use generic config accesses
> 
>  arch/arm/mach-cns3xxx/pcie.c                   |  52 ++----
>  arch/arm/mach-integrator/pci_v3.c              |  61 +-------
>  arch/arm/mach-ks8695/pci.c                     |  77 +--------
>  arch/arm/mach-sa1100/pci-nanoengine.c          |  94 +----------
>  arch/frv/mb93090-mb00/pci-vdk.c                |   4 +-
>  arch/mips/pci/pci-bcm1480.c                    |   4 +-
>  arch/mips/pci/pci-octeon.c                     |   4 +-
>  arch/mips/pci/pcie-octeon.c                    |  12 +-
>  arch/mn10300/unit-asb2305/pci.c                |   4 +-
>  arch/powerpc/platforms/cell/celleb_scc_pciex.c |   4 +-
>  arch/powerpc/platforms/powermac/pci.c          | 209 +++++--------------------
>  arch/powerpc/sysdev/fsl_pci.c                  |  46 +-----
>  drivers/pci/access.c                           |  87 ++++++++++
>  drivers/pci/host/pci-host-generic.c            |  51 +-----
>  drivers/pci/host/pci-rcar-gen2.c               |  51 +-----
>  drivers/pci/host/pci-tegra.c                   |  55 +------
>  drivers/pci/host/pci-xgene.c                   | 150 ++----------------
>  drivers/pci/host/pcie-xilinx.c                 |  88 ++---------
>  include/linux/pci.h                            |  11 ++
>  19 files changed, 212 insertions(+), 852 deletions(-)

Really nice cleanups.  I added these with the acks so far to a pci/config
branch for v3.20.  I'll update it with more acks if they trickle in.

You've structured it nicely so I can also just drop individual arch pieces
if necessary.  The pieces that haven't been acked yet (hint, hint):

    arch/arm/mach-cns3xxx/pcie.c
    arch/arm/mach-sa1100/pci-nanoengine.c
    arch/mn10300/unit-asb2305/pci.c
    arch/powerpc

In addition, nobody has acked the frv and mips parts, but they're trivial
(they only add struct member names) that I can apply them without worrying.

Bjorn

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <bhelgaas@google.com>
To: Rob Herring <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org, "Arnd Bergmann" <arnd@arndb.de>,
	linux-pci@vger.kernel.org, "Alexandre Courbot" <gnurou@gmail.com>,
	"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
	"David Howells" <dhowells@redhat.com>,
	"Greg Ungerer" <gerg@uclinux.org>,
	"Koichi Yasutake" <yasutake.koichi@jp.panasonic.com>,
	"Krzysztof Halasa" <khalasa@piap.pl>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Michael Ellerman" <mpe@ellerman.id.au>,
	"Michal Simek" <michal.simek@xilinx.com>,
	"Paul Mackerras" <paulus@samba.org>,
	"Ralf Baechle" <ralf@linux-mips.org>,
	"Russell King" <linux@arm.linux.org.uk>,
	"Simon Horman" <horms@verge.net.au>,
	"Sören Brinkmann" <soren.brinkmann@xilinx.com>,
	"Stephen Warren" <swarren@wwwdotorg.org>,
	"Tanmay Inamdar" <tinamdar@apm.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Will Deacon" <will.deacon@arm.com>,
	cbe-oss-dev@lists.ozlabs.org, linux-am33-list@redhat.com,
	linux-arm-kernel@lists.infradead.org, linux-mips@linux-mips.org,
	linuxppc-dev@lists.ozlabs.org, linux-sh@vger.kernel.org,
	linux-tegra@vger.kernel.org
Subject: Re: [PATCH 00/16] PCI generic configuration space accessors
Date: Thu, 22 Jan 2015 15:03:44 -0600	[thread overview]
Message-ID: <20150122210344.GE13072@google.com> (raw)
In-Reply-To: <1420857290-8373-1-git-send-email-robh@kernel.org>

On Fri, Jan 09, 2015 at 08:34:34PM -0600, Rob Herring wrote:
> This series adds common accessor functions for PCI configuration space
> accesses. This supports most PCI hosts with memory mapped configuration
> space like ECAM or hosts with memory mapped address/data registers. ECAM
> is not generically supported by this series, but could be added on top
> of this. While some hosts have standard address decoding which could be 
> common as well, the various checks on bus numbers and device numbers are 
> quite varied. It is unclear how much of that is really necessary or 
> could be common. 
> 
> The first 4 patches are preparatory cleanup. Patch 5 introduces the
> common accessors. The remaining patches convert several PCI host
> controllers. This is in no way a complete list of host controllers. The
> conversion of more hosts should be possible. The Designware controller
> in particular should be able to be converted, but its config space
> accessors are a mess of override-able functions that I've not gotten my
> head around.
> 
> This series is available here [1].
> 
> Rob
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git pci-config-access
> 
> Rob Herring (16):
>   frv: add struct pci_ops member names to initialization
>   mips: add struct pci_ops member names to initialization
>   mn10300: add struct pci_ops member names to initialization
>   powerpc: add struct pci_ops member names to initialization
>   pci: introduce common pci config space accessors
>   ARM: cns3xxx: convert PCI to use generic config accesses
>   ARM: integrator: convert PCI to use generic config accesses
>   ARM: sa1100: convert PCI to use generic config accesses
>   ARM: ks8695: convert PCI to use generic config accesses
>   powerpc: fsl_pci: convert PCI to use generic config accesses
>   powerpc: powermac: convert PCI to use generic config accesses
>   pci/host: generic: convert to use generic config accesses
>   pci/host: rcar-gen2: convert to use generic config accesses
>   pci/host: tegra: convert to use generic config accesses
>   pci/host: xgene: convert to use generic config accesses
>   pci/host: xilinx: convert to use generic config accesses
> 
>  arch/arm/mach-cns3xxx/pcie.c                   |  52 ++----
>  arch/arm/mach-integrator/pci_v3.c              |  61 +-------
>  arch/arm/mach-ks8695/pci.c                     |  77 +--------
>  arch/arm/mach-sa1100/pci-nanoengine.c          |  94 +----------
>  arch/frv/mb93090-mb00/pci-vdk.c                |   4 +-
>  arch/mips/pci/pci-bcm1480.c                    |   4 +-
>  arch/mips/pci/pci-octeon.c                     |   4 +-
>  arch/mips/pci/pcie-octeon.c                    |  12 +-
>  arch/mn10300/unit-asb2305/pci.c                |   4 +-
>  arch/powerpc/platforms/cell/celleb_scc_pciex.c |   4 +-
>  arch/powerpc/platforms/powermac/pci.c          | 209 +++++--------------------
>  arch/powerpc/sysdev/fsl_pci.c                  |  46 +-----
>  drivers/pci/access.c                           |  87 ++++++++++
>  drivers/pci/host/pci-host-generic.c            |  51 +-----
>  drivers/pci/host/pci-rcar-gen2.c               |  51 +-----
>  drivers/pci/host/pci-tegra.c                   |  55 +------
>  drivers/pci/host/pci-xgene.c                   | 150 ++----------------
>  drivers/pci/host/pcie-xilinx.c                 |  88 ++---------
>  include/linux/pci.h                            |  11 ++
>  19 files changed, 212 insertions(+), 852 deletions(-)

Really nice cleanups.  I added these with the acks so far to a pci/config
branch for v3.20.  I'll update it with more acks if they trickle in.

You've structured it nicely so I can also just drop individual arch pieces
if necessary.  The pieces that haven't been acked yet (hint, hint):

    arch/arm/mach-cns3xxx/pcie.c
    arch/arm/mach-sa1100/pci-nanoengine.c
    arch/mn10300/unit-asb2305/pci.c
    arch/powerpc

In addition, nobody has acked the frv and mips parts, but they're trivial
(they only add struct member names) that I can apply them without worrying.

Bjorn

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <bhelgaas@google.com>
To: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org, linux-sh@vger.kernel.org,
	linux-pci@vger.kernel.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Will Deacon" <will.deacon@arm.com>,
	"David Howells" <dhowells@redhat.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Paul Mackerras" <paulus@samba.org>,
	"Tanmay Inamdar" <tinamdar@apm.com>,
	"Greg Ungerer" <gerg@uclinux.org>,
	"Alexandre Courbot" <gnurou@gmail.com>,
	linux-am33-list@redhat.com,
	"Russell King" <linux@arm.linux.org.uk>,
	"Michal Simek" <michal.simek@xilinx.com>,
	linux-arm-kernel@lists.infradead.org,
	cbe-oss-dev@lists.ozlabs.org, "Arnd Bergmann" <arnd@arndb.de>,
	"Stephen Warren" <swarren@wwwdotorg.org>,
	"Simon Horman" <horms@verge.net.au>,
	"Krzysztof Halasa" <khalasa@piap.pl>,
	linux-tegra@vger.kernel.org,
	"Sören Brinkmann" <soren.brinkmann@xilinx.com>,
	linux-kernel@vger.kernel.org,
	"Ralf Baechle" <ralf@linux-mips.org>,
	"Koichi Yasutake" <yasutake.koichi@jp.panasonic.com>,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 00/16] PCI generic configuration space accessors
Date: Thu, 22 Jan 2015 15:03:44 -0600	[thread overview]
Message-ID: <20150122210344.GE13072@google.com> (raw)
In-Reply-To: <1420857290-8373-1-git-send-email-robh@kernel.org>

On Fri, Jan 09, 2015 at 08:34:34PM -0600, Rob Herring wrote:
> This series adds common accessor functions for PCI configuration space
> accesses. This supports most PCI hosts with memory mapped configuration
> space like ECAM or hosts with memory mapped address/data registers. ECAM
> is not generically supported by this series, but could be added on top
> of this. While some hosts have standard address decoding which could be 
> common as well, the various checks on bus numbers and device numbers are 
> quite varied. It is unclear how much of that is really necessary or 
> could be common. 
> 
> The first 4 patches are preparatory cleanup. Patch 5 introduces the
> common accessors. The remaining patches convert several PCI host
> controllers. This is in no way a complete list of host controllers. The
> conversion of more hosts should be possible. The Designware controller
> in particular should be able to be converted, but its config space
> accessors are a mess of override-able functions that I've not gotten my
> head around.
> 
> This series is available here [1].
> 
> Rob
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git pci-config-access
> 
> Rob Herring (16):
>   frv: add struct pci_ops member names to initialization
>   mips: add struct pci_ops member names to initialization
>   mn10300: add struct pci_ops member names to initialization
>   powerpc: add struct pci_ops member names to initialization
>   pci: introduce common pci config space accessors
>   ARM: cns3xxx: convert PCI to use generic config accesses
>   ARM: integrator: convert PCI to use generic config accesses
>   ARM: sa1100: convert PCI to use generic config accesses
>   ARM: ks8695: convert PCI to use generic config accesses
>   powerpc: fsl_pci: convert PCI to use generic config accesses
>   powerpc: powermac: convert PCI to use generic config accesses
>   pci/host: generic: convert to use generic config accesses
>   pci/host: rcar-gen2: convert to use generic config accesses
>   pci/host: tegra: convert to use generic config accesses
>   pci/host: xgene: convert to use generic config accesses
>   pci/host: xilinx: convert to use generic config accesses
> 
>  arch/arm/mach-cns3xxx/pcie.c                   |  52 ++----
>  arch/arm/mach-integrator/pci_v3.c              |  61 +-------
>  arch/arm/mach-ks8695/pci.c                     |  77 +--------
>  arch/arm/mach-sa1100/pci-nanoengine.c          |  94 +----------
>  arch/frv/mb93090-mb00/pci-vdk.c                |   4 +-
>  arch/mips/pci/pci-bcm1480.c                    |   4 +-
>  arch/mips/pci/pci-octeon.c                     |   4 +-
>  arch/mips/pci/pcie-octeon.c                    |  12 +-
>  arch/mn10300/unit-asb2305/pci.c                |   4 +-
>  arch/powerpc/platforms/cell/celleb_scc_pciex.c |   4 +-
>  arch/powerpc/platforms/powermac/pci.c          | 209 +++++--------------------
>  arch/powerpc/sysdev/fsl_pci.c                  |  46 +-----
>  drivers/pci/access.c                           |  87 ++++++++++
>  drivers/pci/host/pci-host-generic.c            |  51 +-----
>  drivers/pci/host/pci-rcar-gen2.c               |  51 +-----
>  drivers/pci/host/pci-tegra.c                   |  55 +------
>  drivers/pci/host/pci-xgene.c                   | 150 ++----------------
>  drivers/pci/host/pcie-xilinx.c                 |  88 ++---------
>  include/linux/pci.h                            |  11 ++
>  19 files changed, 212 insertions(+), 852 deletions(-)

Really nice cleanups.  I added these with the acks so far to a pci/config
branch for v3.20.  I'll update it with more acks if they trickle in.

You've structured it nicely so I can also just drop individual arch pieces
if necessary.  The pieces that haven't been acked yet (hint, hint):

    arch/arm/mach-cns3xxx/pcie.c
    arch/arm/mach-sa1100/pci-nanoengine.c
    arch/mn10300/unit-asb2305/pci.c
    arch/powerpc

In addition, nobody has acked the frv and mips parts, but they're trivial
(they only add struct member names) that I can apply them without worrying.

Bjorn

WARNING: multiple messages have this Message-ID (diff)
From: bhelgaas@google.com (Bjorn Helgaas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/16] PCI generic configuration space accessors
Date: Thu, 22 Jan 2015 15:03:44 -0600	[thread overview]
Message-ID: <20150122210344.GE13072@google.com> (raw)
In-Reply-To: <1420857290-8373-1-git-send-email-robh@kernel.org>

On Fri, Jan 09, 2015 at 08:34:34PM -0600, Rob Herring wrote:
> This series adds common accessor functions for PCI configuration space
> accesses. This supports most PCI hosts with memory mapped configuration
> space like ECAM or hosts with memory mapped address/data registers. ECAM
> is not generically supported by this series, but could be added on top
> of this. While some hosts have standard address decoding which could be 
> common as well, the various checks on bus numbers and device numbers are 
> quite varied. It is unclear how much of that is really necessary or 
> could be common. 
> 
> The first 4 patches are preparatory cleanup. Patch 5 introduces the
> common accessors. The remaining patches convert several PCI host
> controllers. This is in no way a complete list of host controllers. The
> conversion of more hosts should be possible. The Designware controller
> in particular should be able to be converted, but its config space
> accessors are a mess of override-able functions that I've not gotten my
> head around.
> 
> This series is available here [1].
> 
> Rob
> 
> [1] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git pci-config-access
> 
> Rob Herring (16):
>   frv: add struct pci_ops member names to initialization
>   mips: add struct pci_ops member names to initialization
>   mn10300: add struct pci_ops member names to initialization
>   powerpc: add struct pci_ops member names to initialization
>   pci: introduce common pci config space accessors
>   ARM: cns3xxx: convert PCI to use generic config accesses
>   ARM: integrator: convert PCI to use generic config accesses
>   ARM: sa1100: convert PCI to use generic config accesses
>   ARM: ks8695: convert PCI to use generic config accesses
>   powerpc: fsl_pci: convert PCI to use generic config accesses
>   powerpc: powermac: convert PCI to use generic config accesses
>   pci/host: generic: convert to use generic config accesses
>   pci/host: rcar-gen2: convert to use generic config accesses
>   pci/host: tegra: convert to use generic config accesses
>   pci/host: xgene: convert to use generic config accesses
>   pci/host: xilinx: convert to use generic config accesses
> 
>  arch/arm/mach-cns3xxx/pcie.c                   |  52 ++----
>  arch/arm/mach-integrator/pci_v3.c              |  61 +-------
>  arch/arm/mach-ks8695/pci.c                     |  77 +--------
>  arch/arm/mach-sa1100/pci-nanoengine.c          |  94 +----------
>  arch/frv/mb93090-mb00/pci-vdk.c                |   4 +-
>  arch/mips/pci/pci-bcm1480.c                    |   4 +-
>  arch/mips/pci/pci-octeon.c                     |   4 +-
>  arch/mips/pci/pcie-octeon.c                    |  12 +-
>  arch/mn10300/unit-asb2305/pci.c                |   4 +-
>  arch/powerpc/platforms/cell/celleb_scc_pciex.c |   4 +-
>  arch/powerpc/platforms/powermac/pci.c          | 209 +++++--------------------
>  arch/powerpc/sysdev/fsl_pci.c                  |  46 +-----
>  drivers/pci/access.c                           |  87 ++++++++++
>  drivers/pci/host/pci-host-generic.c            |  51 +-----
>  drivers/pci/host/pci-rcar-gen2.c               |  51 +-----
>  drivers/pci/host/pci-tegra.c                   |  55 +------
>  drivers/pci/host/pci-xgene.c                   | 150 ++----------------
>  drivers/pci/host/pcie-xilinx.c                 |  88 ++---------
>  include/linux/pci.h                            |  11 ++
>  19 files changed, 212 insertions(+), 852 deletions(-)

Really nice cleanups.  I added these with the acks so far to a pci/config
branch for v3.20.  I'll update it with more acks if they trickle in.

You've structured it nicely so I can also just drop individual arch pieces
if necessary.  The pieces that haven't been acked yet (hint, hint):

    arch/arm/mach-cns3xxx/pcie.c
    arch/arm/mach-sa1100/pci-nanoengine.c
    arch/mn10300/unit-asb2305/pci.c
    arch/powerpc

In addition, nobody has acked the frv and mips parts, but they're trivial
(they only add struct member names) that I can apply them without worrying.

Bjorn

  parent reply	other threads:[~2015-01-22 21:03 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-10  2:34 [PATCH 00/16] PCI generic configuration space accessors Rob Herring
2015-01-10  2:34 ` Rob Herring
2015-01-10  2:34 ` Rob Herring
2015-01-10  2:34 ` Rob Herring
2015-01-10  2:34 ` Rob Herring
2015-01-10  2:34 ` [PATCH 01/16] frv: add struct pci_ops member names to initialization Rob Herring
2015-01-10  2:34 ` [PATCH 02/16] mips: " Rob Herring
2015-01-10  2:34 ` [PATCH 03/16] mn10300: " Rob Herring
2015-01-10  2:34 ` [PATCH 04/16] powerpc: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-10  2:34 ` [PATCH 05/16] pci: introduce common pci config space accessors Rob Herring
2015-01-12 10:01   ` Thierry Reding
2015-01-12 10:04     ` Thierry Reding
2015-01-10  2:34 ` [PATCH 06/16] ARM: cns3xxx: convert PCI to use generic config accesses Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-29  6:16   ` Krzysztof Hałasa
2015-01-29  6:16     ` Krzysztof Hałasa
2015-01-29 14:35     ` Bjorn Helgaas
2015-01-29 14:35       ` Bjorn Helgaas
2015-01-10  2:34 ` [PATCH 07/16] ARM: integrator: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-10 21:40   ` Linus Walleij
2015-01-10 21:40     ` Linus Walleij
2015-01-10 21:40     ` Linus Walleij
2015-01-10 21:53     ` Arnd Bergmann
2015-01-10 21:53       ` Arnd Bergmann
2015-01-10 21:53       ` Arnd Bergmann
2015-01-12  0:05       ` Linus Walleij
2015-01-12  0:05         ` Linus Walleij
2015-01-12  0:05         ` Linus Walleij
2015-01-22 20:33         ` Bjorn Helgaas
2015-01-22 20:33           ` Bjorn Helgaas
2015-01-22 20:33           ` Bjorn Helgaas
2015-01-26 18:22           ` Bjorn Helgaas
2015-01-26 18:22             ` Bjorn Helgaas
2015-01-26 18:22             ` Bjorn Helgaas
2015-01-26 23:22             ` Linus Walleij
2015-01-26 23:22               ` Linus Walleij
2015-01-26 23:22               ` Linus Walleij
2015-01-10  2:34 ` [PATCH 08/16] ARM: sa1100: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-10  2:34 ` [PATCH 09/16] ARM: ks8695: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-12 12:38   ` Greg Ungerer
2015-01-12 12:38     ` Greg Ungerer
2015-01-10  2:34 ` [PATCH 10/16] powerpc: fsl_pci: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-10  2:34 ` [PATCH 11/16] powerpc: powermac: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-10  2:34 ` [PATCH 12/16] pci/host: generic: convert " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-12 17:51   ` Will Deacon
2015-01-12 17:51     ` Will Deacon
2015-01-12 17:51     ` Will Deacon
2015-01-10  2:34 ` [PATCH 13/16] pci/host: rcar-gen2: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-12  9:25   ` Geert Uytterhoeven
2015-01-12  9:25     ` Geert Uytterhoeven
2015-01-10  2:34 ` [PATCH 14/16] pci/host: tegra: " Rob Herring
2015-01-12 10:07   ` Thierry Reding
2015-01-10  2:34 ` [PATCH 15/16] pci/host: xgene: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-10  2:34 ` [PATCH 16/16] pci/host: xilinx: " Rob Herring
2015-01-10  2:34   ` Rob Herring
2015-01-22 21:03 ` Bjorn Helgaas [this message]
2015-01-22 21:03   ` [PATCH 00/16] PCI generic configuration space accessors Bjorn Helgaas
2015-01-22 21:03   ` Bjorn Helgaas
2015-01-22 21:03   ` Bjorn Helgaas
2015-01-22 21:03   ` Bjorn Helgaas
2015-01-22 23:47   ` Rob Herring
2015-01-22 23:47     ` Rob Herring
2015-01-22 23:47     ` Rob Herring
2015-01-22 23:47     ` Rob Herring
2015-01-22 23:47     ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150122210344.GE13072@google.com \
    --to=bhelgaas@google.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.