* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-01-24 15:44 York Sun
2015-01-27 11:50 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-01-24 15:44 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298:
powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23
16:56:09 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 41ba57d0c7968506ddcc71604bd39131acf6ee23:
fsl/ls1021qds: Add deep sleep support (2015-01-24 09:12:32 -0600)
----------------------------------------------------------------
Alison Wang (5):
ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default
arm: ls102xa: Update snoop settings for CCI-400
ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot
arm: ls102xa: Add LPUART support for LS1021AQDS board
arm: ls102xa: Add LPUART support for LS1021ATWR board
Ruchika Gupta (2):
arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL
crypto/fsl: Add fixup for crypto node
Xiubo Li (1):
ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
York Sun (1):
arm/ls1021a: Add workaround for DDR erratum A008378
tang yuantian (2):
ARM: HYP/non-sec: Make variable gic_dist_addr as a local one
fsl/ls1021qds: Add deep sleep support
arch/arm/cpu/armv7/ls102xa/fdt.c | 49 ++++++
arch/arm/cpu/armv7/virt-v7.c | 9 +-
arch/arm/include/asm/arch-ls102xa/config.h | 5 +
arch/arm/include/asm/arch-ls102xa/gpio.h | 15 ++
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 4 +
arch/powerpc/cpu/mpc8xxx/fdt.c | 170 -------------------
arch/powerpc/include/asm/config.h | 1 +
board/freescale/ls1021aqds/MAINTAINERS | 1 +
board/freescale/ls1021aqds/Makefile | 1 +
board/freescale/ls1021aqds/dcu.c | 92 +++++++++++
board/freescale/ls1021aqds/ddr.c | 17 ++
board/freescale/ls1021aqds/ls1021aqds.c | 86 +++++++++-
board/freescale/ls1021aqds/ls1021aqds_qixis.h | 2 +
board/freescale/ls1021atwr/MAINTAINERS | 1 +
board/freescale/ls1021atwr/ls1021atwr.c | 25 +--
configs/ls1021aqds_nor_lpuart_defconfig | 3 +
configs/ls1021atwr_nor_lpuart_defconfig | 3 +
drivers/crypto/fsl/Makefile | 1 +
drivers/crypto/fsl/sec.c | 184 +++++++++++++++++++++
drivers/ddr/fsl/fsl_ddr_gen4.c | 8 +
include/configs/ls1021aqds.h | 41 ++++-
include/configs/ls1021atwr.h | 12 ++
include/fsl_ddr.h | 6 +
23 files changed, 545 insertions(+), 191 deletions(-)
create mode 100644 arch/arm/include/asm/arch-ls102xa/gpio.h
create mode 100644 board/freescale/ls1021aqds/dcu.c
create mode 100644 configs/ls1021aqds_nor_lpuart_defconfig
create mode 100644 configs/ls1021atwr_nor_lpuart_defconfig
create mode 100644 drivers/crypto/fsl/sec.c
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-01-24 15:44 [U-Boot] Please pull u-boot-fsl-qoriq master York Sun
@ 2015-01-27 11:50 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-01-27 11:50 UTC (permalink / raw)
To: u-boot
On Sat, Jan 24, 2015 at 09:44:14AM -0600, York Sun wrote:
> Tom,
>
> The following changes since commit 37b608a52dcb13312a4f7ccea199cd6bac76d298:
>
> powerpc: remove icecube_5200, Lite5200, cpci5200, mecp5200, pf5200 (2015-01-23
> 16:56:09 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 41ba57d0c7968506ddcc71604bd39131acf6ee23:
>
> fsl/ls1021qds: Add deep sleep support (2015-01-24 09:12:32 -0600)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150127/a45dad61/attachment.pgp>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2019-05-24 5:07 Prabhakar Kushwaha
2019-05-26 10:48 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: Prabhakar Kushwaha @ 2019-05-24 5:07 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit 7e090b466c5ba874d31c1bf22c3a130d516cdc32:
Merge git://git.denx.de/u-boot-fsl-qoriq (2019-05-22 08:32:24 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git HEAD
for you to fetch changes up to 02dc1599ba0b16eb21ba0c206e5b6f38fe7b67a7:
configs: enable sata, eSDHC, USB device module in T2080QDS (2019-05-23 20:00:38 +0530)
Feature Support: Enable DM for SATA, SDHC, USB in T2080QDS
Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/536324167
----------------------------------------------------------------
Peng Ma (4):
ata: fsl_ahci: Add sata DM support for Freescale powerpc socs
arch: powerpc: add sata node for t2080 dts
powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.
configs: enable sata, eSDHC, USB device module in T2080QDS
Yinbo Zhu (6):
arch: powerpc: add eSDHC node to t2080qds dts
driver: mmc: set sdhc clock in fsl_esdhc for CONFIG_PPC
driver: mmc: adopt 32 bit addr in fsl_esdhc for CONFIG_PPC
configs: T2080QDS: enable device tree support for pcieboot & secure boot
arch: powerpc: add usb node in t2080 dts
usb: ehci: adopt 32 bit address for CONFIG_PPC
arch/powerpc/cpu/mpc85xx/Kconfig | 4 +-
arch/powerpc/dts/t2080.dtsi | 45 ++
configs/T2080QDS_NAND_defconfig | 7 +
configs/T2080QDS_SDCARD_defconfig | 7 +
configs/T2080QDS_SECURE_BOOT_defconfig | 10 +-
configs/T2080QDS_SPIFLASH_defconfig | 7 +
configs/T2080QDS_SRIO_PCIE_BOOT_defconfig | 11 +-
configs/T2080QDS_defconfig | 7 +
drivers/ata/Kconfig | 10 +
drivers/ata/Makefile | 1 +
drivers/ata/fsl_ahci.c | 1030 +++++++++++++++++++++++++++++
drivers/ata/fsl_sata.h | 1 +
drivers/mmc/fsl_esdhc.c | 11 +-
drivers/usb/host/ehci-fsl.c | 10 +-
14 files changed, 1154 insertions(+), 7 deletions(-)
create mode 100644 drivers/ata/fsl_ahci.c
--prabhakar (pk)
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2019-05-24 5:07 Prabhakar Kushwaha
@ 2019-05-26 10:48 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2019-05-26 10:48 UTC (permalink / raw)
To: u-boot
On Fri, May 24, 2019 at 05:07:51AM +0000, Prabhakar Kushwaha wrote:
> Hi Tom,
>
> The following changes since commit 7e090b466c5ba874d31c1bf22c3a130d516cdc32:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2019-05-22 08:32:24 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git HEAD
>
> for you to fetch changes up to 02dc1599ba0b16eb21ba0c206e5b6f38fe7b67a7:
>
> configs: enable sata, eSDHC, USB device module in T2080QDS (2019-05-23 20:00:38 +0530)
>
>
> Feature Support: Enable DM for SATA, SDHC, USB in T2080QDS
>
> Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/536324167
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190526/c6ca685e/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2019-05-22 12:31 Prabhakar Kushwaha
2019-05-22 16:58 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: Prabhakar Kushwaha @ 2019-05-22 12:31 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit e1a2ed7180adeefb6164239a18249dca5701319d:
Merge git://git.denx.de/u-boot-mpc83xx (2019-05-21 07:13:35 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git HEAD
for you to fetch changes up to e50663e85d74c4f8015d5157c249cf62c7d0cded:
armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.h (2019-05-22 12:24:25 +0530)
Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/535646990
Changes from rc2 tag
- Support PCIe Gen4 driver of the Mobiveil IP
- NXP LS1028A SoC and platform support
- Few SPI related config updates
- Distinguish the ecc val by chassis version and move the ecc addr to dts
- sp805 watchdog support
----------------------------------------------------------------
Andy Shevchenko (1):
armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.h
Ashish Kumar (1):
configs: Unset CONFIG_SPI_BAR for all LS1088A defconfigs
Chuanhua Han (1):
configs: Enable CONFIG_SPI_FLASH for ls1088ardb_defconfig
Florin Chiculita (1):
board: fsl: lx2160ardb: invert AQR107 pins polarity
Hou Zhiqiang (8):
armv8: layerscape: use PCIe address macro for precompile PCIe MMU entry
armv8: fsl-layerscpae: correct the PCIe controllers' region size
armv8: lx2160a: add MMU table entries for PCIe
pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs
kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPAT
pci: ls_pcie_g4: add device tree fixups for PCI Stream IDs
armv8: lx2160a: add PCIe controller DT nodes
armv8: lx2160a: enable PCIe support
Kuldeep Singh (1):
configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable
Peng Ma (2):
ARM: dts: Freescale: Add ecc addr for sata node
scsi: ceva: Clean up the driver code
Qiang Zhao (3):
driver: watchdog: add sp805 watchdog support
arm: dts: fsl-ls1028a: add sp805 watchdog node
config: enable SP805 watchdog support for LS1028A
Rajat Srivastava (2):
configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigs
configs: Unset CONFIG_SPI_BAR for all LS2080A/LS2081A defconfigs
Udit Agarwal (1):
armv8: fsl-layerscape: Set env_loc to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.
Vinitha V Pillai (1):
armv8: Secure Boot: Modify boot_a_script definition
Yuantian Tang (3):
armv8: ls1028a: Add NXP LS1028A SoC support
armv8: ls1028ardb: Add support for LS1028ARDB
armv8: ls1028aqds: Add support of LS1028AQDS
MAINTAINERS | 1 +
arch/arm/Kconfig | 23 +
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 41 +-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 36 +-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 51 ++
arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c | 73 +++
arch/arm/dts/Makefile | 2 +
arch/arm/dts/fsl-ls1012a.dtsi | 4 +-
arch/arm/dts/fsl-ls1028a-qds.dts | 88 ++++
arch/arm/dts/fsl-ls1028a-rdb.dts | 88 ++++
arch/arm/dts/fsl-ls1028a.dtsi | 285 ++++++++++
arch/arm/dts/fsl-ls1043a.dtsi | 4 +-
arch/arm/dts/fsl-ls1046a.dtsi | 4 +-
arch/arm/dts/fsl-ls1088a.dtsi | 4 +-
arch/arm/dts/fsl-lx2160a.dtsi | 85 +++
arch/arm/dts/ls1021a.dtsi | 4 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 61 +++
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 9 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 23 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 1 +
.../asm/arch-fsl-layerscape/stream_id_lsch3.h | 2 +-
board/freescale/ls1028a/Kconfig | 65 +++
board/freescale/ls1028a/MAINTAINERS | 21 +
board/freescale/ls1028a/Makefile | 8 +
board/freescale/ls1028a/README | 164 ++++++
board/freescale/ls1028a/ddr.c | 20 +
board/freescale/ls1028a/ls1028a.c | 231 +++++++++
board/freescale/lx2160a/lx2160a.c | 8 +
configs/ls1028aqds_tfa_defconfig | 64 +++
configs/ls1028ardb_tfa_defconfig | 64 +++
configs/ls1046aqds_qspi_defconfig | 5 +-
configs/ls1046aqds_sdcard_qspi_defconfig | 5 +-
configs/ls1046aqds_tfa_defconfig | 1 +
configs/ls1046ardb_emmc_defconfig | 5 +-
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 5 +-
configs/ls1046ardb_qspi_defconfig | 5 +-
configs/ls1046ardb_qspi_spl_defconfig | 5 +-
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 5 +-
configs/ls1046ardb_sdcard_defconfig | 5 +-
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 5 +-
configs/ls1046ardb_tfa_defconfig | 5 +-
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088aqds_qspi_defconfig | 1 +
configs/ls1088aqds_sdcard_qspi_defconfig | 1 +
configs/ls1088aqds_tfa_defconfig | 1 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_qspi_defconfig | 1 +
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_sdcard_qspi_defconfig | 1 +
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_tfa_defconfig | 1 +
configs/ls2080aqds_nand_defconfig | 1 +
configs/ls2080aqds_qspi_defconfig | 1 +
configs/ls2080aqds_sdcard_defconfig | 1 +
configs/ls2080ardb_defconfig | 1 +
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls2088ardb_qspi_defconfig | 1 +
configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls2088ardb_tfa_defconfig | 1 +
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 5 +
configs/lx2160aqds_tfa_defconfig | 6 +
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 5 +
configs/lx2160ardb_tfa_defconfig | 6 +
drivers/ata/sata_ceva.c | 50 +-
drivers/pci/Kconfig | 8 +
drivers/pci/Makefile | 2 +
drivers/pci/pcie_layerscape_gen4.c | 572 +++++++++++++++++++++
drivers/pci/pcie_layerscape_gen4.h | 264 ++++++++++
drivers/pci/pcie_layerscape_gen4_fixup.c | 249 +++++++++
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/sp805_wdt.c | 127 +++++
include/configs/ls1012afrwy.h | 3 +-
include/configs/ls1012ardb.h | 3 +-
include/configs/ls1021atwr.h | 3 +-
include/configs/ls1028a_common.h | 200 +++++++
include/configs/ls1028aqds.h | 161 ++++++
include/configs/ls1028ardb.h | 77 +++
include/configs/ls1043a_common.h | 3 +-
include/configs/ls1046a_common.h | 5 +-
include/configs/ls1088ardb.h | 3 +-
include/configs/ls2080ardb.h | 3 +-
include/configs/lx2160a_common.h | 1 -
include/configs/lx2160ardb.h | 1 +
86 files changed, 3308 insertions(+), 65 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c
create mode 100644 arch/arm/dts/fsl-ls1028a-qds.dts
create mode 100644 arch/arm/dts/fsl-ls1028a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls1028a.dtsi
create mode 100644 board/freescale/ls1028a/Kconfig
create mode 100644 board/freescale/ls1028a/MAINTAINERS
create mode 100644 board/freescale/ls1028a/Makefile
create mode 100644 board/freescale/ls1028a/README
create mode 100644 board/freescale/ls1028a/ddr.c
create mode 100644 board/freescale/ls1028a/ls1028a.c
create mode 100644 configs/ls1028aqds_tfa_defconfig
create mode 100644 configs/ls1028ardb_tfa_defconfig
create mode 100644 drivers/pci/pcie_layerscape_gen4.c
create mode 100644 drivers/pci/pcie_layerscape_gen4.h
create mode 100644 drivers/pci/pcie_layerscape_gen4_fixup.c
create mode 100644 drivers/watchdog/sp805_wdt.c
create mode 100644 include/configs/ls1028a_common.h
create mode 100644 include/configs/ls1028aqds.h
create mode 100644 include/configs/ls1028ardb.h
--prabhakar (pk)
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2019-05-22 12:31 Prabhakar Kushwaha
@ 2019-05-22 16:58 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2019-05-22 16:58 UTC (permalink / raw)
To: u-boot
On Wed, May 22, 2019 at 12:31:23PM +0000, Prabhakar Kushwaha wrote:
> Hi Tom,
>
> The following changes since commit e1a2ed7180adeefb6164239a18249dca5701319d:
>
> Merge git://git.denx.de/u-boot-mpc83xx (2019-05-21 07:13:35 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git HEAD
>
> for you to fetch changes up to e50663e85d74c4f8015d5157c249cf62c7d0cded:
>
> armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.h (2019-05-22 12:24:25 +0530)
>
> Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/535646990
>
> Changes from rc2 tag
> - Support PCIe Gen4 driver of the Mobiveil IP
> - NXP LS1028A SoC and platform support
> - Few SPI related config updates
> - Distinguish the ecc val by chassis version and move the ecc addr to dts
> - sp805 watchdog support
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190522/ffa66108/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2019-03-15 12:54 Prabhakar Kushwaha
2019-03-17 19:30 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: Prabhakar Kushwaha @ 2019-03-15 12:54 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit 9ba5e5bc261a16f51662490da0cf620dc7f29013:
Revert "env: add spi_flash_read_env function" (2019-03-13 20:32:09 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git HEAD
for you to fetch changes up to 158097052a6a528408e05d2345ff2ccdbb46036e:
armv7: ls102xa: Add workaround for DDR erratum A-008850 (2019-03-15 11:52:01 +0530)
Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/506626436
Changes from rc4 tag
- DPAA2 fixes and DDR errata workaround for LS1021A
----------------------------------------------------------------
Alison Wang (1):
armv7: ls102xa: Add workaround for DDR erratum A-008850
Ioana Ciocoi Radulescu (1):
driver: net: fsl-mc: Fix DPC MAC address fixup
Meenakshi Aggarwal (1):
mc : Reduce MC memory size to 128M
Pankaj Bansal (2):
drivers: net: ldpaa_eth: check if the dpmac is enabled
board: fsl: lx2160aqds: modify the phy fixup code
Pramod Kumar (1):
drivers: net: ls1088ardb: Fix EC1 and EC2 RCW offset
arch/arm/cpu/armv7/ls102xa/Kconfig | 6 ++++
arch/arm/cpu/armv7/ls102xa/soc.c | 44 +++++++++++++++++++++----
arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h | 2 ++
board/freescale/ls1021aiot/ls1021aiot.c | 2 ++
board/freescale/ls1021aqds/ddr.c | 2 ++
board/freescale/ls1021aqds/ddr.h | 3 ++
board/freescale/ls1021aqds/ls1021aqds.c | 30 -----------------
board/freescale/ls1021atwr/ls1021atwr.c | 2 ++
board/freescale/lx2160a/eth_lx2160aqds.c | 38 +++++++++++++++++----
drivers/net/fsl-mc/mc.c | 26 ++++++++++++---
drivers/net/ldpaa_eth/ls1088a.c | 4 +--
drivers/net/ldpaa_eth/lx2160a.c | 4 +--
include/configs/ls1021aiot.h | 2 ++
include/configs/ls1021atwr.h | 2 ++
include/configs/ls1088a_common.h | 2 +-
include/configs/ls2080a_common.h | 2 +-
include/configs/lx2160a_common.h | 2 +-
17 files changed, 117 insertions(+), 56 deletions(-)
--prabhakar (pk)
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2019-03-04 8:57 Prabhakar Kushwaha
2019-03-05 2:47 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: Prabhakar Kushwaha @ 2019-03-04 8:57 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit cfba74d0bef350d81241b059180bcc5a1e93bdfa:
Merge branch 'master' of git://git.denx.de/u-boot-socfpga (2019-02-28 18:57:32 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git HEAD
for you to fetch changes up to d2c49aad51e930e40a4bff6b4727b070248e7eb5:
board: Enable DHCP distro boot for LS1012a, LS1021a (2019-03-03 22:01:19 +0530)
Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/501143115
Changes from rc2 tag
- Enable DHCP as boot-source in distro boot for NXP layerscape platforms
- fix register layout for SEC on Layerscape architectures
- fixes related to DPAA2 ethernet
----------------------------------------------------------------
Laurentiu Tudor (3):
fsl_sec: fix register layout on Layerscape architectures
armv8: fsl-layerscape: fix SEC QI ICID setup
armv8: fsl-layerscape: avoid DT fixup warning
Mian Yousaf Kaukab (12):
board: ls1088a: fix dppa exit when using efi boot
board: ls1088a: fix fsl-mc search path
Revert "ls1088a: remove dhcp function from u-boot env as boot source"
board: ls1088ardb: use default scan_dev_for_boot
Revert "ls2080ardb: remove dhcp function from env as boot source"
board: ls2080ardb: use default scan_dev_for_boot
board: ls1046a: enable EFI_LOADER_BOUNCE_BUFFER
board: ls1046a: enable dhcp boot
board: ls1046a: use default scan_dev_for_boot
board: ls1043a: enable EFI_LOADER_BOUNCE_BUFFER
board: ls1043a: enable dhcp boot
board: ls1043a: use default scan_dev_for_boot
Prabhakar Kushwaha (1):
board: ls1046qds: Enable PPA for secure boot
Rajesh Bhagat (1):
configs: fsl: move DDR specific defines to Kconfig
Yunfeng Ding (1):
board: Enable DHCP distro boot for LS1012a, LS1021a
arch/arm/Kconfig | 14 ++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 2 +-
arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h | 12 +++++++++---
arch/powerpc/cpu/mpc85xx/Kconfig | 13 +++++++++++++
arch/powerpc/cpu/mpc86xx/Kconfig | 1 +
board/freescale/ls1088a/ls1088a.c | 12 +++++++-----
configs/ls1043aqds_defconfig | 1 +
configs/ls1043aqds_lpuart_defconfig | 1 +
configs/ls1043aqds_nand_defconfig | 1 +
configs/ls1043aqds_nor_ddr3_defconfig | 1 +
configs/ls1043aqds_qspi_defconfig | 1 +
configs/ls1043aqds_sdcard_ifc_defconfig | 1 +
configs/ls1043aqds_sdcard_qspi_defconfig | 1 +
configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1043aqds_tfa_defconfig | 1 +
configs/ls1043ardb_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_defconfig | 1 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_nand_defconfig | 1 +
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_sdcard_defconfig | 1 +
configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 1 +
configs/ls1046aqds_SECURE_BOOT_defconfig | 3 ++-
configs/ls1046aqds_defconfig | 1 +
configs/ls1046aqds_lpuart_defconfig | 1 +
configs/ls1046aqds_nand_defconfig | 1 +
configs/ls1046aqds_qspi_defconfig | 1 +
configs/ls1046aqds_sdcard_ifc_defconfig | 1 +
configs/ls1046aqds_sdcard_qspi_defconfig | 1 +
configs/ls1046aqds_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1046aqds_tfa_defconfig | 1 +
configs/ls1046ardb_emmc_defconfig | 1 +
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_qspi_defconfig | 1 +
configs/ls1046ardb_qspi_spl_defconfig | 1 +
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_sdcard_defconfig | 1 +
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_tfa_defconfig | 1 +
drivers/ddr/fsl/Kconfig | 12 ++++++++++++
include/configs/B4860QDS.h | 3 ---
include/configs/BSC9132QDS.h | 1 -
include/configs/MPC8536DS.h | 1 -
include/configs/MPC8540ADS.h | 1 -
include/configs/MPC8541CDS.h | 1 -
include/configs/MPC8544DS.h | 1 -
include/configs/MPC8548CDS.h | 1 -
include/configs/MPC8555CDS.h | 1 -
include/configs/MPC8560ADS.h | 1 -
include/configs/MPC8568MDS.h | 1 -
include/configs/MPC8569MDS.h | 1 -
include/configs/MPC8572DS.h | 1 -
include/configs/MPC8610HPCD.h | 1 -
include/configs/MPC8641HPCN.h | 1 -
include/configs/P1023RDB.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/T208xQDS.h | 2 --
include/configs/T208xRDB.h | 1 -
include/configs/T4240RDB.h | 1 -
include/configs/UCP1020.h | 1 -
include/configs/km/kmp204x-common.h | 1 -
include/configs/ls1012a_common.h | 5 +++--
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 3 ++-
include/configs/ls1043a_common.h | 9 ++-------
include/configs/ls1043aqds.h | 4 ----
include/configs/ls1043ardb.h | 2 --
include/configs/ls1046a_common.h | 10 ++--------
include/configs/ls1046aqds.h | 4 ----
include/configs/ls1046ardb.h | 4 ----
include/configs/ls1088a_common.h | 4 ----
include/configs/ls1088ardb.h | 15 ++-------------
include/configs/ls2080a_common.h | 3 ---
include/configs/ls2080a_emu.h | 2 --
include/configs/ls2080aqds.h | 3 ---
include/configs/ls2080ardb.h | 17 ++---------------
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/sbc8548.h | 1 -
include/configs/socrates.h | 1 -
include/configs/t4qds.h | 1 -
include/configs/xpedite520x.h | 1 -
include/configs/xpedite537x.h | 1 -
include/fsl_sec.h | 8 ++++++++
scripts/config_whitelist.txt | 4 ----
87 files changed, 114 insertions(+), 119 deletions(-)
--Prabhakar (pk)
Patchwork handle: prabhu_kush
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2019-03-04 8:57 Prabhakar Kushwaha
@ 2019-03-05 2:47 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2019-03-05 2:47 UTC (permalink / raw)
To: u-boot
On Mon, Mar 04, 2019 at 08:57:35AM +0000, Prabhakar Kushwaha wrote:
> Hi Tom,
>
> The following changes since commit cfba74d0bef350d81241b059180bcc5a1e93bdfa:
>
> Merge branch 'master' of git://git.denx.de/u-boot-socfpga (2019-02-28 18:57:32 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git HEAD
>
> for you to fetch changes up to d2c49aad51e930e40a4bff6b4727b070248e7eb5:
>
> board: Enable DHCP distro boot for LS1012a, LS1021a (2019-03-03 22:01:19 +0530)
>
>
> Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/501143115
>
> Changes from rc2 tag
> - Enable DHCP as boot-source in distro boot for NXP layerscape platforms
> - fix register layout for SEC on Layerscape architectures
> - fixes related to DPAA2 ethernet
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190304/13ae51c8/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2019-02-20 7:31 Prabhakar Kushwaha
2019-02-21 23:09 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: Prabhakar Kushwaha @ 2019-02-20 7:31 UTC (permalink / raw)
To: u-boot
Hi Tom,
The following changes since commit f14de0014c56093feecf42ca38b8ae5b3878f176:
Prepare v2019.04-rc2 (2019-02-18 21:36:39 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git HEAD
for you to fetch changes up to b0d4a854751b1bee75fc04fac58561212f6b9c64:
configs: ls1021a: enable sata configs for all ls1021a defconfigs (2019-02-19 10:26:44 +0530)
Travis build log is https://travis-ci.org/prabhukush/u-boot/builds/495272779
Major features of pull request
- Support of NXP's LX2160RDB and LX2160QDS platform
- Enable SATA DM model for NXP's ARM SoCs
----------------------------------------------------------------
Meenakshi Aggarwal (3):
arch: arm: lib: Flush L3 after relocation to DDR
armv8: emc2305: add support for fan controller
lx2160: Enable support of EMC2305
Pankaj Bansal (2):
armv8: fsl-layerscape: reorder rgmii dpmacs' enablement
lx2160aqds : Add support for LX2160AQDS platform
Peng Ma (7):
armv8: ls1043a: move SCSI_AHCI and SCSI to arm/Kconfig
configs: ls1043aqds: enable sata configs for all ls1043aqds defconfigs
configs: ls1046a: enable sata configs for all ls1046a defconfigs
configs: ls1088a: enable sata configs for all ls1088a defconfigs
configs: ls208xa: enable sata configs for all ls208xa defconfigs
configs: ls1012afrwy: enable sata configs for all ls1012afrwy defconfigs
configs: ls1021a: enable sata configs for all ls1021a defconfigs
Priyanka Jain (6):
armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE
drivers/ddr/fsl: Update fsl_ddr_board_options as weak function
armv8, lx2160a: Initialize ethernet array in serdes_init
armv8: lx2160ardb : Add support for LX2160ARDB platform
board/lx2160ardb: Add distro boot support
board/lx2160a: Add init_func_vid() definition
Rajesh Bhagat (2):
armv8: layerscape: move TZASC and TZPC configs to Kconfig
armv8: layerscape: move CONFIG_LAYERSCAPE to Kconfig
Udit Agarwal (1):
armv8: lx2160: Add secure boot target and enable distro boot.
Wen He (1):
armv8: ls1043ardb: Add the nand_bootcmd definition
Zhao Qiang (1):
QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card
arch/arm/Kconfig | 29 +-
arch/arm/cpu/armv8/Kconfig | 3 +-
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 25 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 22 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 20 +
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-lx2160a-qds.dts | 17 +
arch/arm/dts/fsl-lx2160a-rdb.dts | 44 ++
arch/arm/dts/fsl-lx2160a.dtsi | 63 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 3 -
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 10 +-
arch/arm/lib/relocate_64.S | 1 +
board/freescale/common/Makefile | 2 +
board/freescale/common/emc2305.c | 41 ++
board/freescale/common/emc2305.h | 23 +
board/freescale/common/qixis.c | 4 +
board/freescale/lx2160a/Kconfig | 34 +
board/freescale/lx2160a/MAINTAINERS | 26 +
board/freescale/lx2160a/Makefile | 10 +
board/freescale/lx2160a/README | 197 +++++
board/freescale/lx2160a/ddr.c | 20 +
board/freescale/lx2160a/eth_lx2160aqds.c | 805 +++++++++++++++++++++
board/freescale/lx2160a/eth_lx2160ardb.c | 210 ++++++
board/freescale/lx2160a/lx2160a.c | 574 +++++++++++++++
configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 4 +-
configs/ls1012afrwy_qspi_defconfig | 4 +-
configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig | 4 +-
configs/ls1012afrwy_tfa_defconfig | 4 +-
configs/ls1021aiot_qspi_defconfig | 5 +-
configs/ls1021aiot_sdcard_defconfig | 5 +-
configs/ls1021aqds_ddr4_nor_defconfig | 4 +
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 +
configs/ls1021aqds_nand_defconfig | 4 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 4 +
configs/ls1021aqds_nor_defconfig | 4 +
configs/ls1021aqds_nor_lpuart_defconfig | 4 +
configs/ls1021aqds_qspi_defconfig | 4 +
configs/ls1021aqds_sdcard_ifc_defconfig | 4 +
configs/ls1021aqds_sdcard_qspi_defconfig | 4 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 3 +
configs/ls1021atwr_nor_lpuart_defconfig | 3 +
configs/ls1021atwr_qspi_defconfig | 3 +
configs/ls1021atwr_sdcard_ifc_defconfig | 3 +
configs/ls1021atwr_sdcard_qspi_defconfig | 3 +
configs/ls1043aqds_lpuart_defconfig | 3 +
configs/ls1043aqds_nand_defconfig | 3 +
configs/ls1043aqds_nor_ddr3_defconfig | 3 +
configs/ls1043aqds_qspi_defconfig | 3 +
configs/ls1043aqds_sdcard_ifc_defconfig | 3 +
configs/ls1043aqds_sdcard_qspi_defconfig | 3 +
configs/ls1043aqds_tfa_SECURE_BOOT_defconfig | 2 +
configs/ls1043aqds_tfa_defconfig | 2 +
configs/ls1046aqds_SECURE_BOOT_defconfig | 3 +
configs/ls1046aqds_lpuart_defconfig | 3 +
configs/ls1046aqds_nand_defconfig | 3 +
configs/ls1046aqds_qspi_defconfig | 3 +
configs/ls1046aqds_sdcard_ifc_defconfig | 3 +
configs/ls1046aqds_sdcard_qspi_defconfig | 3 +
configs/ls1046ardb_emmc_defconfig | 3 +
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 3 +
configs/ls1046ardb_qspi_spl_defconfig | 4 +
configs/ls1046ardb_sdcard_defconfig | 3 +
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 3 +
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 3 +
configs/ls1088aqds_qspi_defconfig | 3 +
configs/ls1088aqds_sdcard_ifc_defconfig | 3 +
configs/ls1088aqds_sdcard_qspi_defconfig | 3 +
configs/ls1088aqds_tfa_defconfig | 3 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 3 +
configs/ls1088ardb_sdcard_qspi_defconfig | 3 +
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 3 +
configs/ls1088ardb_tfa_defconfig | 3 +
configs/ls2080aqds_SECURE_BOOT_defconfig | 3 +
configs/ls2080aqds_nand_defconfig | 3 +
configs/ls2080aqds_qspi_defconfig | 3 +
configs/ls2080aqds_sdcard_defconfig | 3 +
configs/ls2080ardb_SECURE_BOOT_defconfig | 3 +
configs/ls2080ardb_nand_defconfig | 3 +
configs/ls2081ardb_defconfig | 4 +
configs/ls2088aqds_tfa_defconfig | 3 +
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 3 +
configs/ls2088ardb_qspi_defconfig | 3 +
configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 3 +
configs/ls2088ardb_tfa_defconfig | 3 +
configs/lx2160aqds_tfa_SECURE_BOOT_defconfig | 58 ++
configs/lx2160aqds_tfa_defconfig | 53 ++
configs/lx2160ardb_tfa_SECURE_BOOT_defconfig | 55 ++
configs/lx2160ardb_tfa_defconfig | 53 ++
drivers/ddr/fsl/options.c | 9 +-
include/configs/ls1012a_common.h | 1 -
include/configs/ls1043a_common.h | 11 +-
include/configs/ls1046a_common.h | 1 -
include/configs/ls1088a_common.h | 1 -
include/configs/ls2080a_common.h | 2 -
include/configs/lx2160a_common.h | 289 ++++++++
include/configs/lx2160aqds.h | 140 ++++
include/configs/lx2160ardb.h | 109 +++
scripts/config_whitelist.txt | 3 -
99 files changed, 3140 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/dts/fsl-lx2160a-qds.dts
create mode 100644 arch/arm/dts/fsl-lx2160a-rdb.dts
create mode 100644 board/freescale/common/emc2305.c
create mode 100644 board/freescale/common/emc2305.h
create mode 100644 board/freescale/lx2160a/Kconfig
create mode 100644 board/freescale/lx2160a/MAINTAINERS
create mode 100644 board/freescale/lx2160a/Makefile
create mode 100644 board/freescale/lx2160a/README
create mode 100644 board/freescale/lx2160a/ddr.c
create mode 100644 board/freescale/lx2160a/eth_lx2160aqds.c
create mode 100644 board/freescale/lx2160a/eth_lx2160ardb.c
create mode 100644 board/freescale/lx2160a/lx2160a.c
create mode 100644 configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
create mode 100644 configs/lx2160aqds_tfa_defconfig
create mode 100644 configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
create mode 100644 configs/lx2160ardb_tfa_defconfig
create mode 100644 include/configs/lx2160a_common.h
create mode 100644 include/configs/lx2160aqds.h
create mode 100644 include/configs/lx2160ardb.h
Thanks,
Prabhakar (pk)
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2019-01-18 18:09 York Sun
2019-01-19 14:02 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2019-01-18 18:09 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit d3689267f92c5956e09cc7d1baa4700141662bff:
Prepare v2019.01 (2019-01-14 17:02:36 -0500)
are available in the Git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git tags/fsl-qoriq-for-v2019.04-rc1
for you to fetch changes up to a200ebea630002b14def4a015642fa341dc9cd11:
armv8: ls2088ardb: Update MAINTAINERS (2019-01-17 13:17:51 -0800)
----------------------------------------------------------------
Add TFA boot flow for more boards
Add TFA boot defconfig for ls1088a and ls2088a.
Add dts fixup for PCIe endpoint and root complex.
Travis build log is https://travis-ci.org/yorksun/u-boot/builds/481076641
----------------------------------------------------------------
Florinel Iordache (1):
ls1046aqds: Bypass xfi port fixup for KR mode
Hou Zhiqiang (2):
armv8: ls1043a: add SVR definitions for 23x23 package silicon
armv8: ls1043a: correct the PCIe INTx fixup
Laurentiu Tudor (1):
armv8: fsl-layerscape: properly configure qdma ICID
Mian Yousaf Kaukab (1):
fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefi
Pankit Garg (3):
ls1043a: add support for nand-boot cmd for TFA
armv8: ls1088ardb: Add TFABOOT support
armv8: ls1088aqds: Add TFABOOT support
Rajesh Bhagat (7):
armv8: fsl-layerscape: fixes for TFABOOT framework
drivers: ifc: restore the legacy flow for IFC config
armv8: ls2088ardb: Add TFABOOT support
armv8: ls2088aqds: Add TFABOOT support
env: fix allow to build multiple environments
configs: update TFABOOT defconfigs for SD boot support
armv7: dts: ls1021a: Remove aliases property name warning
Xiaowei Bao (3):
pci: layerscape: Modify the EP and RC mode judge method
pci: layerscape: Do not scan when PEX work in EP mode
pci: layerscape: Add the dts fixup for EP and RC
Yinbo Zhu (1):
mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
York Sun (2):
armv8: ls1088ardb: Update MAINTAINERS
armv8: ls2088ardb: Update MAINTAINERS
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 26 +--
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 13 +-
arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 4 +
arch/arm/dts/ls1021a-iot.dtsi | 6 +-
arch/arm/dts/ls1021a-qds.dtsi | 10 +-
arch/arm/dts/ls1021a-twr.dtsi | 6 +-
.../arm/include/asm/arch-fsl-layerscape/fsl_icid.h | 6 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 +
board/freescale/ls1046aqds/eth.c | 35 ++--
board/freescale/ls1088a/MAINTAINERS | 5 +
board/freescale/ls1088a/ddr.c | 11 ++
board/freescale/ls1088a/ls1088a.c | 196
++++++++++++++++++++-
board/freescale/ls2080a/ls2080a.c | 10 +-
board/freescale/ls2080aqds/MAINTAINERS | 2 +
board/freescale/ls2080aqds/ddr.c | 12 ++
board/freescale/ls2080aqds/ls2080aqds.c | 3 +-
board/freescale/ls2080ardb/MAINTAINERS | 3 +
board/freescale/ls2080ardb/ddr.c | 12 ++
board/freescale/ls2080ardb/ls2080ardb.c | 40 ++++-
configs/ls1043aqds_tfa_defconfig | 1 +
configs/ls1043ardb_tfa_defconfig | 1 +
configs/ls1046aqds_tfa_defconfig | 1 +
configs/ls1046ardb_tfa_defconfig | 1 +
configs/ls1088aqds_tfa_defconfig | 70 ++++++++
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 64 +++++++
configs/ls1088ardb_tfa_defconfig | 62 +++++++
configs/ls2088aqds_tfa_defconfig | 64 +++++++
configs/ls2088ardb_tfa_SECURE_BOOT_defconfig | 74 ++++++++
configs/ls2088ardb_tfa_defconfig | 73 ++++++++
drivers/misc/fsl_ifc.c | 173 ++++++++++++++++++
drivers/mmc/fsl_esdhc.c | 1 -
drivers/net/fsl-mc/mc.c | 5 +
drivers/pci/pcie_layerscape.c | 21 +--
drivers/pci/pcie_layerscape.h | 1 +
drivers/pci/pcie_layerscape_fixup.c | 25 ++-
include/configs/ls1043a_common.h | 2 +
include/configs/ls1088a_common.h | 11 +-
include/configs/ls1088aqds.h | 99 ++++++++++-
include/configs/ls1088ardb.h | 137 +++++++++++++-
include/configs/ls2080a_common.h | 8 +
include/configs/ls2080aqds.h | 40 ++++-
include/configs/ls2080ardb.h | 137 +++++++++++++-
include/environment.h | 9 -
include/fsl-mc/fsl_mc.h | 1 +
include/mmc.h | 3 +
48 files changed, 1420 insertions(+), 74 deletions(-)
create mode 100644 configs/ls1088aqds_tfa_defconfig
create mode 100644 configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
create mode 100644 configs/ls1088ardb_tfa_defconfig
create mode 100644 configs/ls2088aqds_tfa_defconfig
create mode 100644 configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
create mode 100644 configs/ls2088ardb_tfa_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2019-01-18 18:09 York Sun
@ 2019-01-19 14:02 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2019-01-19 14:02 UTC (permalink / raw)
To: u-boot
On Fri, Jan 18, 2019 at 06:09:19PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit d3689267f92c5956e09cc7d1baa4700141662bff:
>
> Prepare v2019.01 (2019-01-14 17:02:36 -0500)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git tags/fsl-qoriq-for-v2019.04-rc1
>
> for you to fetch changes up to a200ebea630002b14def4a015642fa341dc9cd11:
>
> armv8: ls2088ardb: Update MAINTAINERS (2019-01-17 13:17:51 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190119/431eb0ce/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-09-28 15:04 York Sun
2018-09-30 2:27 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-09-28 15:04 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 9dc8d155d4e88563f572ee79aab758eb4272f3fd:
Merge git://git.denx.de/u-boot-imx (2018-09-19 20:35:27 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git tags/fsl-qoriq-for-v2018.11-rc1
for you to fetch changes up to 26cbc0d663555b8af7d40ecfd0d0fefe960d9686:
armv7: ls102xa: Disable QE before enter deep sleep (2018-09-27
10:01:28 -0700)
----------------------------------------------------------------
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.
Switch to driver model for SATA on LS1021A and LS1043A.
Add support for LS1012AFRWY rev C board.
Enable SMMU for LS1043A.
Build log is available at
https://travis-ci.org/yorksun/u-boot/builds/434207475.
----------------------------------------------------------------
Laurentiu Tudor (4):
armv8: fsl-layerscape: add missing qe base address define
armv8: ls1043a: advertise QMan v3 in configuration
armv8: ls1043a: add icid setup support
armv8: ls1043a: enable icid setup for qman portals
Nipun Gupta (1):
u-boot: fixup the iommu-map property of fsl-mc node
Peng Ma (7):
armv8: dts: fsl-ls1043a: add sata node support
scsi: ceva: add ls1043a soc support
arm64: ls1043aqds: enable DM support for sata
armv7: fsl: remove sata support
armv7: dts: fsl-ls1021a: add sata node support enable sata for
ls1021a-qds and ls1021a-twr
arm: ls1021atwr: enable DM support for sata
scsi: ceva: add ls1021a soc support.
Prabhakar Kushwaha (1):
driver: net: fsl-mc: Memset MC reserve ram memory before usage
Pramod Kumar (3):
ls1012afrwy: Add ls1012afrwy revC board support.
ls1012a: remove debug info from u-boot log
ls1088a: remove dhcp function from u-boot env as boot source
Priyanka Jain (1):
ls2080ardb: remove dhcp function from env as boot source
Ran Wang (2):
drivers: qe: Move CONFIG_U_QE to Kconfig
armv7: ls102xa: Disable QE before enter deep sleep
Yinbo Zhu (8):
ppa/fm/qe: use block layer in ppa/fm/qe driver
armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support
armv8: ls2088a: add eSDHC node
armv8: ls1088a: add eSDHC node
armv8: ls1043a: add eSDHC node
armv8: ls1046a: add eSDHC node
armv7: ls1021a: enable esdhc
Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig
Zhao Qiang (1):
net: fman: Support both new and legacy FMan Compatibles
arch/arm/cpu/armv7/ls102xa/Makefile | 1 -
arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c | 4 +
arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c | 41 ----------
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 14 ++++
arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c | 90
++++++++++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 7 +-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +-
arch/arm/dts/fsl-ls1043a-qds.dtsi | 4 +
arch/arm/dts/fsl-ls1043a.dtsi | 16 ++++
arch/arm/dts/fsl-ls1046a.dtsi | 8 ++
arch/arm/dts/fsl-ls1088a.dtsi | 9 +++
arch/arm/dts/fsl-ls2080a.dtsi | 8 ++
arch/arm/dts/ls1021a-qds.dtsi | 4 +
arch/arm/dts/ls1021a-twr.dtsi | 4 +
arch/arm/dts/ls1021a.dtsi | 8 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
.../arm/include/asm/arch-fsl-layerscape/fsl_icid.h | 4 +
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 2 +
.../asm/arch-fsl-layerscape/stream_id_lsch3.h | 3 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 29 +------
arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h | 10 ---
board/freescale/ls1012afrdm/ls1012afrdm.c | 20 +++--
board/freescale/ls1021aiot/ls1021aiot.c | 5 --
board/freescale/ls1021aqds/ls1021aqds.c | 4 -
board/freescale/ls1021atwr/ls1021atwr.c | 4 -
board/freescale/ls1043aqds/ls1043aqds.c | 3 +
board/freescale/ls1043ardb/ls1043ardb.c | 3 +
board/freescale/ls1088a/ls1088a.c | 2 +
board/freescale/ls2080a/ls2080a.c | 2 +
board/freescale/ls2080aqds/ls2080aqds.c | 2 +
board/freescale/ls2080ardb/ls2080ardb.c | 2 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 +
configs/ls1021atwr_nor_defconfig | 7 ++
configs/ls1021atwr_nor_lpuart_defconfig | 2 +
configs/ls1021atwr_qspi_defconfig | 2 +
configs/ls1021atwr_sdcard_ifc_defconfig | 2 +
configs/ls1021atwr_sdcard_qspi_defconfig | 2 +
configs/ls1043aqds_defconfig | 7 ++
configs/ls1043aqds_lpuart_defconfig | 2 +
configs/ls1043aqds_nand_defconfig | 2 +
configs/ls1043aqds_nor_ddr3_defconfig | 2 +
configs/ls1043aqds_qspi_defconfig | 2 +
configs/ls1043aqds_sdcard_ifc_defconfig | 2 +
configs/ls1043aqds_sdcard_qspi_defconfig | 2 +
configs/ls1043ardb_SECURE_BOOT_defconfig | 2 +
configs/ls1043ardb_defconfig | 2 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 2 +
configs/ls1043ardb_nand_defconfig | 2 +
configs/ls1043ardb_sdcard_defconfig | 2 +
configs/ls1046aqds_SECURE_BOOT_defconfig | 2 +
configs/ls1046aqds_defconfig | 2 +
configs/ls1046aqds_lpuart_defconfig | 2 +
configs/ls1046aqds_nand_defconfig | 2 +
configs/ls1046aqds_qspi_defconfig | 2 +
configs/ls1046aqds_sdcard_ifc_defconfig | 2 +
configs/ls1046aqds_sdcard_qspi_defconfig | 2 +
configs/ls1046ardb_emmc_defconfig | 2 +
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 2 +
configs/ls1046ardb_qspi_defconfig | 2 +
configs/ls1046ardb_sdcard_defconfig | 2 +
configs/ls1088aqds_defconfig | 2 +
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 2 +
configs/ls1088aqds_qspi_defconfig | 2 +
configs/ls1088aqds_sdcard_ifc_defconfig | 2 +
configs/ls1088aqds_sdcard_qspi_defconfig | 2 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 2 +
configs/ls1088ardb_qspi_defconfig | 2 +
configs/ls1088ardb_sdcard_qspi_defconfig | 2 +
configs/ls2080a_emu_defconfig | 2 +
configs/ls2080a_simu_defconfig | 2 +
configs/ls2080aqds_SECURE_BOOT_defconfig | 2 +
configs/ls2080aqds_defconfig | 2 +
configs/ls2080aqds_nand_defconfig | 2 +
configs/ls2080aqds_qspi_defconfig | 2 +
configs/ls2080aqds_sdcard_defconfig | 2 +
configs/ls2080ardb_SECURE_BOOT_defconfig | 2 +
configs/ls2080ardb_defconfig | 2 +
configs/ls2080ardb_nand_defconfig | 2 +
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 2 +
configs/ls2088ardb_qspi_defconfig | 2 +
drivers/Kconfig | 2 +
drivers/ata/sata_ceva.c | 28 ++++++-
drivers/misc/fsl_portals.c | 11 +--
drivers/net/fm/fm.c | 2 +-
drivers/net/fm/init.c | 3 +-
drivers/net/fsl-mc/mc.c | 41 ++++++++++
drivers/net/pfe_eth/pfe_mdio.c | 1 -
drivers/qe/Kconfig | 12 +++
drivers/qe/qe.c | 2 +-
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/ls1012afrwy.h | 6 +-
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/ls1043ardb.h | 7 --
include/configs/ls1088ardb.h | 3 +-
include/configs/ls2080ardb.h | 3 +-
include/fsl-mc/fsl_mc.h | 1 +
scripts/config_whitelist.txt | 1 -
101 files changed, 417 insertions(+), 136 deletions(-)
delete mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c
delete mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
create mode 100644 drivers/qe/Kconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-09-28 15:04 York Sun
@ 2018-09-30 2:27 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-09-30 2:27 UTC (permalink / raw)
To: u-boot
On Fri, Sep 28, 2018 at 03:04:42PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 9dc8d155d4e88563f572ee79aab758eb4272f3fd:
>
> Merge git://git.denx.de/u-boot-imx (2018-09-19 20:35:27 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git tags/fsl-qoriq-for-v2018.11-rc1
>
> for you to fetch changes up to 26cbc0d663555b8af7d40ecfd0d0fefe960d9686:
>
> armv7: ls102xa: Disable QE before enter deep sleep (2018-09-27
> 10:01:28 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180929/c8dfe15b/attachment-0001.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-08-23 19:01 York Sun
2018-08-24 2:45 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-08-23 19:01 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit b71d9e8b3805305ea4116733f515061710ad7081:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2018-08-20
13:41:56 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 4b5892c4808ec162253b4b8173b6995e5dac4246:
armv8: layerscape: Build u-boot-with-spl.bin for selected boards
(2018-08-23 08:17:35 -0700)
Travis build log https://travis-ci.org/yorksun/u-boot/builds/419707822
----------------------------------------------------------------
Jagdish Gediya (1):
armv8: layerscape: Build u-boot-with-spl.bin for selected boards
York Sun (1):
armv8: fsl-layerscape: Update README.falcon for compression
arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon | 2 +-
include/configs/ls1088a_common.h | 1 +
include/configs/ls2080a_common.h | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-08-13 16:19 York Sun
2018-08-13 23:55 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-08-13 16:19 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 373413cce6260acdf14de762f94010b627a77a3b:
Merge branch 'master' of git://git.denx.de/u-boot-video (2018-08-07
07:15:20 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 9add5a4b75a01cc5f69b9d5f6b30443f2088d7d8:
armv8: layerscape: Enable EHCI access for LS1012A (2018-08-10 10:37:39
-0700)
Tavis build log https://travis-ci.org/yorksun/u-boot/builds/414623801
----------------------------------------------------------------
Brendan Shanks (1):
arm: ls102xa: Fix RGMII phy-connection-type FDT fixup
Darwin Dingel (1):
mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages
Jagdish Gediya (1):
board: freescale: ls1012ardb: Add command to switch QSPI bank
Joakim Tjernlund (1):
FSL PCI: Configure PCIe reference ratio
Laurentiu Tudor (8):
armv8: fsl-layerscape: add missing register blocks base address
defines
armv8: ls1046a: advertise QMan v3 in configuration
misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms
armv8: fsl-layerscape: add missing debug stream ID
armv8: ls1046a: initial icid setup support
armv8: ls1046a: add icid setup for qman portals
armv8: ls1046a: setup fman ports ICIDs and device tree
armv8: ls1046a: setup SEC ICIDs and fix up device tree
Pankaj Bansal (2):
fsl/mc: Limit the ethernet name to ETH_NAME_LEN
net: Increase ethernet name string size to 20 chars
Ran Wang (2):
armv8: layerscape: move ns_dev[] define from h to c file.
armv8: layerscape: Enable EHCI access for LS1012A
Vinitha V Pillai (1):
Board: ls1088ardb: Enable PCIe config for Secure boot defconfigs
arch/arm/cpu/armv7/ls102xa/fdt.c | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
arch/arm/cpu/armv8/fsl-layerscape/icid.c | 192
+++++++++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 89 ++++++++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 14 ++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
.../arm/include/asm/arch-fsl-layerscape/fsl_icid.h | 115 ++++++++++++
.../include/asm/arch-fsl-layerscape/fsl_portals.h | 24 +++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 15 +-
.../include/asm/arch-fsl-layerscape/ns_access.h | 81 +--------
.../asm/arch-fsl-layerscape/stream_id_lsch2.h | 1 +
arch/arm/include/asm/arch-ls102xa/ns_access.h | 84 ---------
board/freescale/common/ns_access.c | 167 ++++++++++++++++++
board/freescale/ls1012ardb/ls1012ardb.c | 85 +++++++++
board/freescale/ls1046aqds/ls1046aqds.c | 3 +
board/freescale/ls1046ardb/ls1046ardb.c | 3 +
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 4 +
drivers/misc/fsl_portals.c | 45 ++++-
drivers/mtd/nand/fsl_ifc_nand.c | 69 ++++----
drivers/net/fsl-mc/mc.c | 6 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 4 +-
drivers/pci/fsl_pci_init.c | 6 +
include/net.h | 2 +-
23 files changed, 805 insertions(+), 210 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/icid.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_portals.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-06-12 17:24 York Sun
2018-06-12 22:33 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-06-12 17:24 UTC (permalink / raw)
To: u-boot
Tom,
I have fixed the issues you caught earlier, and pass compiling
https://travis-ci.org/yorksun/u-boot/builds/390939575
The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 2d91b533312888e596563a299588e81906383464:
LS1012AFRWY: Add Secure Boot support (2018-06-11 12:34:45 -0700)
----------------------------------------------------------------
Bhaskar Upadhaya (2):
board: Kconfig: Re-Arrangement of PPA firmware and header addresses
board: ls1012a: FRWY-LS1012A board support
Jagdish Gediya (1):
arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command
Priyanka Jain (1):
board/freescale,lsch3: Add entry for 0.9v
Ran Wang (1):
armv8: ls1088a: Enable USB in
ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
Vinitha V Pillai (1):
LS1012AFRWY: Add Secure Boot support
arch/arm/Kconfig | 13 ++
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 34 ------
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/fsl-ls1012a-frwy.dts | 43 +++++++
board/freescale/common/vid.c | 2 +-
board/freescale/ls1012afrdm/Kconfig | 48 +++++++-
board/freescale/ls1012afrdm/MAINTAINERS | 11 ++
board/freescale/ls1012afrdm/ls1012afrdm.c | 73 ++++++++++-
board/freescale/ls1012aqds/Kconfig | 3 +
board/freescale/ls1012ardb/Kconfig | 14 +++
board/freescale/ls1043aqds/Kconfig | 16 +++
board/freescale/ls1043ardb/Kconfig | 14 +++
board/freescale/ls1046aqds/Kconfig | 16 +++
board/freescale/ls1046ardb/Kconfig | 15 +++
board/freescale/ls1088a/Kconfig | 28 +++++
board/freescale/ls2080aqds/Kconfig | 16 +++
board/freescale/ls2080ardb/Kconfig | 31 +++--
configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 54 +++++++++
configs/ls1012afrwy_qspi_defconfig | 50 ++++++++
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 7 ++
drivers/net/pfe_eth/pfe_firmware.c | 29 +++++
include/configs/ls1012afrwy.h | 133
+++++++++++++++++++++
include/configs/ls1021aqds.h | 9 ++
24 files changed, 603 insertions(+), 60 deletions(-)
create mode 100644 arch/arm/dts/fsl-ls1012a-frwy.dts
create mode 100644 configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
create mode 100644 configs/ls1012afrwy_qspi_defconfig
create mode 100644 include/configs/ls1012afrwy.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-06-08 23:49 York Sun
2018-06-09 4:39 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-06-08 23:49 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to e4d594b4e0b4f81a65bd84c41fa7519b279d5432:
LS1012AFRWY: Add Secure Boot support (2018-06-08 16:43:19 -0700)
----------------------------------------------------------------
Bhaskar Upadhaya (2):
board: Kconfig: Re-Arrangement of PPA firmware and header addresses
board: ls1012a: FRWY-LS1012A board support
Jagdish Gediya (1):
arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command
Priyanka Jain (1):
board/freescale,lsch3: Add entry for 0.9v
Ran Wang (1):
armv8: ls1088a: Enable USB in
ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
Vinitha V Pillai (1):
LS1012AFRWY: Add Secure Boot support
arch/arm/Kconfig | 13 ++
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 34 ------
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/fsl-ls1012a-frwy.dts | 43 +++++++
board/freescale/common/vid.c | 2 +-
board/freescale/ls1012afrdm/Kconfig | 47 +++++++-
board/freescale/ls1012afrdm/MAINTAINERS | 11 ++
board/freescale/ls1012afrdm/ls1012afrdm.c | 73 ++++++++++-
board/freescale/ls1012aqds/Kconfig | 3 +
board/freescale/ls1012ardb/Kconfig | 14 +++
board/freescale/ls1043aqds/Kconfig | 16 +++
board/freescale/ls1043ardb/Kconfig | 14 +++
board/freescale/ls1046aqds/Kconfig | 16 +++
board/freescale/ls1046ardb/Kconfig | 15 +++
board/freescale/ls1088a/Kconfig | 28 +++++
board/freescale/ls2080aqds/Kconfig | 16 +++
board/freescale/ls2080ardb/Kconfig | 31 +++--
configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig | 54 +++++++++
configs/ls1012afrwy_qspi_defconfig | 50 ++++++++
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 7 ++
drivers/net/pfe_eth/pfe_firmware.c | 29 +++++
include/configs/ls1012afrwy.h | 134
+++++++++++++++++++++
include/configs/ls1021aqds.h | 9 ++
24 files changed, 603 insertions(+), 60 deletions(-)
create mode 100644 arch/arm/dts/fsl-ls1012a-frwy.dts
create mode 100644 configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
create mode 100644 configs/ls1012afrwy_qspi_defconfig
create mode 100644 include/configs/ls1012afrwy.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-06-08 23:49 York Sun
@ 2018-06-09 4:39 ` Tom Rini
2018-06-09 4:46 ` York Sun
2018-06-09 4:57 ` York Sun
0 siblings, 2 replies; 147+ messages in thread
From: Tom Rini @ 2018-06-09 4:39 UTC (permalink / raw)
To: u-boot
On Fri, Jun 08, 2018 at 11:49:32PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
>
> cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to e4d594b4e0b4f81a65bd84c41fa7519b279d5432:
>
> LS1012AFRWY: Add Secure Boot support (2018-06-08 16:43:19 -0700)
>
NAK. First, include/configs/ls1012afrwy.h needs a kernel-style SPDX
tag. Second (and harder) is that:
commit 6f54af8c1a4dfa66cdeb5931ba5f76a22753d139
Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Date: Wed May 23 11:03:30 2018 +0530
board: ls1012a: FRWY-LS1012A board support
breaks imx6dl_mamoj builds.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180609/0adf9a3d/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-06-09 4:39 ` Tom Rini
@ 2018-06-09 4:46 ` York Sun
2018-06-11 12:25 ` Tom Rini
2018-06-09 4:57 ` York Sun
1 sibling, 1 reply; 147+ messages in thread
From: York Sun @ 2018-06-09 4:46 UTC (permalink / raw)
To: u-boot
Thanks for the feedback. I didn't catch the failure. Travis build failed on many targets due to toolchain download. My setup doesn't cover i.mx.
York
Sent from my iPhone
> On Jun 8, 2018, at 21:39, Tom Rini <trini@konsulko.com> wrote:
>
>> On Fri, Jun 08, 2018 at 11:49:32PM +0000, York Sun wrote:
>>
>> Tom,
>>
>> The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
>>
>> cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-fsl-qoriq.git
>>
>> for you to fetch changes up to e4d594b4e0b4f81a65bd84c41fa7519b279d5432:
>>
>> LS1012AFRWY: Add Secure Boot support (2018-06-08 16:43:19 -0700)
>>
>
> NAK. First, include/configs/ls1012afrwy.h needs a kernel-style SPDX
> tag. Second (and harder) is that:
> commit 6f54af8c1a4dfa66cdeb5931ba5f76a22753d139
> Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> Date: Wed May 23 11:03:30 2018 +0530
>
> board: ls1012a: FRWY-LS1012A board support
>
> breaks imx6dl_mamoj builds.
>
> --
> Tom
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-06-09 4:39 ` Tom Rini
2018-06-09 4:46 ` York Sun
@ 2018-06-09 4:57 ` York Sun
2018-06-11 12:29 ` Tom Rini
1 sibling, 1 reply; 147+ messages in thread
From: York Sun @ 2018-06-09 4:57 UTC (permalink / raw)
To: u-boot
On 06/08/2018 09:39 PM, Tom Rini wrote:
> On Fri, Jun 08, 2018 at 11:49:32PM +0000, York Sun wrote:
>
>> Tom,
>>
>> The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
>>
>> cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-fsl-qoriq.git
>>
>> for you to fetch changes up to e4d594b4e0b4f81a65bd84c41fa7519b279d5432:
>>
>> LS1012AFRWY: Add Secure Boot support (2018-06-08 16:43:19 -0700)
>>
>
> NAK. First, include/configs/ls1012afrwy.h needs a kernel-style SPDX
This is easy to fix to follow the new format.
> tag. Second (and harder) is that:
> commit 6f54af8c1a4dfa66cdeb5931ba5f76a22753d139
> Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> Date: Wed May 23 11:03:30 2018 +0530
>
> board: ls1012a: FRWY-LS1012A board support
>
> breaks imx6dl_mamoj builds.
>
Can you share your build log? I am having trouble to connect to my AWS
server today. This commit doesn't touch imx6dl_mamoj.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-06-09 4:57 ` York Sun
@ 2018-06-11 12:29 ` Tom Rini
2018-06-11 16:33 ` York Sun
0 siblings, 1 reply; 147+ messages in thread
From: Tom Rini @ 2018-06-11 12:29 UTC (permalink / raw)
To: u-boot
On Sat, Jun 09, 2018 at 04:57:44AM +0000, York Sun wrote:
> On 06/08/2018 09:39 PM, Tom Rini wrote:
> > On Fri, Jun 08, 2018 at 11:49:32PM +0000, York Sun wrote:
> >
> >> Tom,
> >>
> >> The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
> >>
> >> cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.denx.de/u-boot-fsl-qoriq.git
> >>
> >> for you to fetch changes up to e4d594b4e0b4f81a65bd84c41fa7519b279d5432:
> >>
> >> LS1012AFRWY: Add Secure Boot support (2018-06-08 16:43:19 -0700)
> >>
> >
> > NAK. First, include/configs/ls1012afrwy.h needs a kernel-style SPDX
>
> This is easy to fix to follow the new format.
>
> > tag. Second (and harder) is that:
> > commit 6f54af8c1a4dfa66cdeb5931ba5f76a22753d139
> > Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> > Date: Wed May 23 11:03:30 2018 +0530
> >
> > board: ls1012a: FRWY-LS1012A board support
> >
> > breaks imx6dl_mamoj builds.
> >
>
> Can you share your build log? I am having trouble to connect to my AWS
> server today. This commit doesn't touch imx6dl_mamoj.
+(imx6dl_mamoj) common/spl/built-in.o: In function `board_init_r':
+(imx6dl_mamoj) build/../common/spl/spl.c:492: undefined reference to `spl_board_init'
+(imx6dl_mamoj) make[2]: *** [../scripts/Makefile.spl:347: spl/u-boot-spl] Error 1
+(imx6dl_mamoj) make[1]: *** [Makefile:1507: spl/u-boot-spl] Error 2
Is what I got in my logs. Both the travis builds and my local builds
are using the toolchains we fetch via buildman, so it shouldn't be too
hard to test just that on any Linux box/VM/etc.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180611/1b2108bd/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-06-11 12:29 ` Tom Rini
@ 2018-06-11 16:33 ` York Sun
0 siblings, 0 replies; 147+ messages in thread
From: York Sun @ 2018-06-11 16:33 UTC (permalink / raw)
To: u-boot
On 06/11/2018 05:29 AM, Tom Rini wrote:
> On Sat, Jun 09, 2018 at 04:57:44AM +0000, York Sun wrote:
>> On 06/08/2018 09:39 PM, Tom Rini wrote:
>>> On Fri, Jun 08, 2018 at 11:49:32PM +0000, York Sun wrote:
>>>
>>>> Tom,
>>>>
>>>> The following changes since commit 71002b508a1bc0986023764f155f0db26f548db2:
>>>>
>>>> cmd: add missing line breaks for pr_err() (2018-06-07 20:06:29 -0400)
>>>>
>>>> are available in the git repository at:
>>>>
>>>> git://git.denx.de/u-boot-fsl-qoriq.git
>>>>
>>>> for you to fetch changes up to e4d594b4e0b4f81a65bd84c41fa7519b279d5432:
>>>>
>>>> LS1012AFRWY: Add Secure Boot support (2018-06-08 16:43:19 -0700)
>>>>
>>>
>>> NAK. First, include/configs/ls1012afrwy.h needs a kernel-style SPDX
>>
>> This is easy to fix to follow the new format.
>>
>>> tag. Second (and harder) is that:
>>> commit 6f54af8c1a4dfa66cdeb5931ba5f76a22753d139
>>> Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
>>> Date: Wed May 23 11:03:30 2018 +0530
>>>
>>> board: ls1012a: FRWY-LS1012A board support
>>>
>>> breaks imx6dl_mamoj builds.
>>>
>>
>> Can you share your build log? I am having trouble to connect to my AWS
>> server today. This commit doesn't touch imx6dl_mamoj.
>
> +(imx6dl_mamoj) common/spl/built-in.o: In function `board_init_r':
> +(imx6dl_mamoj) build/../common/spl/spl.c:492: undefined reference to `spl_board_init'
> +(imx6dl_mamoj) make[2]: *** [../scripts/Makefile.spl:347: spl/u-boot-spl] Error 1
> +(imx6dl_mamoj) make[1]: *** [Makefile:1507: spl/u-boot-spl] Error 2
>
> Is what I got in my logs. Both the travis builds and my local builds
> are using the toolchains we fetch via buildman, so it shouldn't be too
> hard to test just that on any Linux box/VM/etc.
>
Thanks. I see what is wrong. Will push a force update and request a pull.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-05-11 4:20 York Sun
2018-05-11 15:45 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-05-11 4:20 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit a43d46a73cb2c40481791cb292b8eb0b5a80d55e:
arm: v7R: Add support for enabling caches (2018-05-07 15:53:29 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to a6f2a6eafe0e5ad71c41341219ae3b187c1f738a:
driver: net: fsl-mc: updated copyright info (2018-05-09 09:17:51 -0500)
----------------------------------------------------------------
Ashish Kumar (3):
armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to
defconfig
armv8: ls1088aqds: Enable mdio commands on u-boot prompt
armv8: ls1088: Update 1900MT/s DDR timing to bring consistency
Hou Zhiqiang (2):
armv8/fsl-lsch2: correct QMAN clock
armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539
robust
Jagdish Gediya (2):
mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0
mtd: nand: fsl_ifc: Fix nand waitfunc return value
Rajat Srivastava (1):
spi: fsl_qspi: Introduce is_controller_busy function
Ruchika Gupta (1):
armv8: sec_firmware: Remove JR3 from device tree node in all cases
Sriram Dash (1):
armv8: layerscape: Avoid code duplication for TZASC Instantiation
Sumit Garg (1):
armv8: sec_firmware: Add support for multiple loadables
Takuma Ueba (1):
powerpc: mpc85xx: Improve Work-around for Erratum A005125
Yogesh Gaur (1):
driver: net: fsl-mc: updated copyright info
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 8 +++
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 4 +-
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 62
++++++++++++----------
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 1 +
arch/arm/cpu/armv8/sec_firmware.c | 59
+++++++++++++++-----
arch/powerpc/cpu/mpc85xx/release.S | 7 +++
board/freescale/ls1088a/ddr.h | 4 +-
board/freescale/ls1088a/eth_ls1088aqds.c | 2 +
configs/ls1088aqds_defconfig | 3 ++
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 3 ++
configs/ls1088aqds_qspi_defconfig | 3 ++
configs/ls1088aqds_sdcard_ifc_defconfig | 3 ++
configs/ls1088aqds_sdcard_qspi_defconfig | 3 ++
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 3 ++
configs/ls1088ardb_qspi_defconfig | 3 ++
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 3 ++
configs/ls1088ardb_sdcard_qspi_defconfig | 3 ++
doc/uImage.FIT/sec_firmware_ppa.its | 49 +++++++++++++++++
drivers/mtd/nand/fsl_ifc_nand.c | 37 ++++++-------
drivers/net/fsl-mc/dpbp.c | 2 +-
drivers/net/fsl-mc/dpio/dpio.c | 2 +-
drivers/net/fsl-mc/dpmac.c | 2 +-
drivers/net/fsl-mc/dpni.c | 2 +-
drivers/net/fsl-mc/dprc.c | 2 +-
drivers/net/fsl-mc/fsl_dpmng_cmd.h | 2 +-
drivers/net/fsl-mc/mc.c | 4 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 2 +-
drivers/net/ldpaa_eth/ldpaa_eth.h | 2 +-
drivers/spi/fsl_qspi.c | 31 +++++++----
include/configs/ls1088a_common.h | 5 --
include/fsl-mc/fsl_dpbp.h | 2 +-
include/fsl-mc/fsl_dpio.h | 2 +-
include/fsl-mc/fsl_dpmac.h | 2 +-
include/fsl-mc/fsl_dpni.h | 2 +-
include/fsl-mc/fsl_dprc.h | 2 +-
include/fsl-mc/fsl_mc_cmd.h | 2 +-
include/fsl-mc/fsl_mc_private.h | 2 +-
include/fsl_ifc.h | 4 +-
39 files changed, 235 insertions(+), 103 deletions(-)
create mode 100644 doc/uImage.FIT/sec_firmware_ppa.its
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-05-11 4:20 York Sun
@ 2018-05-11 15:45 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-05-11 15:45 UTC (permalink / raw)
To: u-boot
On Fri, May 11, 2018 at 04:20:11AM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit a43d46a73cb2c40481791cb292b8eb0b5a80d55e:
>
> arm: v7R: Add support for enabling caches (2018-05-07 15:53:29 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to a6f2a6eafe0e5ad71c41341219ae3b187c1f738a:
>
> driver: net: fsl-mc: updated copyright info (2018-05-09 09:17:51 -0500)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180511/3a178a1c/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-03-20 22:07 York Sun
2018-03-21 1:56 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-03-20 22:07 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit b8aa55cb6414e512cce30bb7db3268eea934466d:
common: move init_helpers.h prototypes in init.h (2018-03-16 14:56:59
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 3386c73d46fa4624a6bec00f304261f9fe814299:
LS2088ARDB: Secure Boot: Fix fall back option failure (2018-03-20
08:30:52 -0700)
----------------------------------------------------------------
Ashish Kumar (4):
armv8: ls1088qds: Remove CONFIG_ from local defines for FPGA
armv8: ls1088a: Add clock related function in CONFIG_SPL_BUILD
armv8: ls1088a: Add i2c_early_init() func for LS1088AQDS
armv8: ls1088aqds: Add IFC-NOR as boot source for LS1088
Vinitha V Pillai (1):
LS2088ARDB: Secure Boot: Fix fall back option failure
arch/arm/dts/fsl-ls1088a-qds.dts | 37 ++++++++++++++++++++++
arch/arm/dts/fsl-ls1088a.dtsi | 5 +++
board/freescale/ls1088a/MAINTAINERS | 2 ++
board/freescale/ls1088a/ls1088a.c | 5 ++-
configs/ls1088aqds_defconfig | 43 ++++++++++++++++++++++++++
configs/ls1088aqds_sdcard_ifc_defconfig | 54
+++++++++++++++++++++++++++++++++
include/configs/ls1088aqds.h | 28 +++++++++--------
include/configs/ls2080ardb.h | 14 ++++-----
8 files changed, 167 insertions(+), 21 deletions(-)
create mode 100644 configs/ls1088aqds_defconfig
create mode 100644 configs/ls1088aqds_sdcard_ifc_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-03-20 22:07 York Sun
@ 2018-03-21 1:56 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-03-21 1:56 UTC (permalink / raw)
To: u-boot
On Tue, Mar 20, 2018 at 10:07:53PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit b8aa55cb6414e512cce30bb7db3268eea934466d:
>
> common: move init_helpers.h prototypes in init.h (2018-03-16 14:56:59
> -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 3386c73d46fa4624a6bec00f304261f9fe814299:
>
> LS2088ARDB: Secure Boot: Fix fall back option failure (2018-03-20
> 08:30:52 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180320/ffc9f923/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-02-12 17:06 York Sun
2018-02-12 22:32 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-02-12 17:06 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 1811a928c6c7604d6d05a84b4d552a7c31b4994e:
Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig (2018-02-08 19:09:03 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to ee3556bcafbb05e59aabdc31368984e76acaabc4:
drivers/ddr/fsl: Dual-license DDR driver (2018-02-09 08:36:40 -0800)
----------------------------------------------------------------
Hou Zhiqiang (1):
ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig
Lukas Auer (1):
crypto/fsl: instantiate all rng state handles
Rajat Srivastava (1):
armv8: ls1088a: qspi: Enable XIP mode above 16 MB addresses
Sriram Dash (1):
armv8: Remove dependency of SERDES for LSCH2 and LSCH3
Vinitha Pillai-B57223 (1):
armv8: ls1012ardb: Add distro secure boot support
York Sun (1):
drivers/ddr/fsl: Dual-license DDR driver
Zhao Qiang (1):
PowerPC: phy: enable all phylib drivers when use phylib and tsec enet
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 14 +++++--
arch/powerpc/include/asm/config.h | 4 +-
configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 13 +++---
configs/ls1046aqds_lpuart_defconfig | 7 ++++
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088aqds_qspi_defconfig | 1 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_qspi_defconfig | 1 +
drivers/crypto/fsl/jobdesc.c | 35 ++++++++--------
drivers/crypto/fsl/jobdesc.h | 2 +-
drivers/crypto/fsl/jr.c | 57
++++++++++++++++-----------
drivers/crypto/fsl/jr.h | 2 +
drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
drivers/ddr/fsl/ctrl_regs.c | 2 +-
drivers/ddr/fsl/ddr1_dimm_params.c | 2 +-
drivers/ddr/fsl/ddr2_dimm_params.c | 2 +-
drivers/ddr/fsl/ddr3_dimm_params.c | 2 +-
drivers/ddr/fsl/ddr4_dimm_params.c | 2 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 2 +-
drivers/ddr/fsl/fsl_mmdc.c | 2 +-
drivers/ddr/fsl/interactive.c | 2 +-
drivers/ddr/fsl/lc_common_dimm_params.c | 2 +-
drivers/ddr/fsl/main.c | 2 +-
drivers/ddr/fsl/mpc85xx_ddr_gen1.c | 2 +-
drivers/ddr/fsl/mpc85xx_ddr_gen2.c | 2 +-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 2 +-
drivers/ddr/fsl/mpc86xx_ddr.c | 2 +-
drivers/ddr/fsl/options.c | 2 +-
drivers/ddr/fsl/util.c | 2 +-
include/common_timing_params.h | 2 +-
include/configs/ls1012ardb.h | 20 +++++++++-
include/fsl_ddr.h | 2 +-
include/fsl_ddr_dimm_params.h | 2 +-
include/fsl_ddrc_version.h | 2 +-
include/fsl_immap.h | 2 +-
include/fsl_mmdc.h | 2 +-
include/fsl_sec.h | 3 ++
37 files changed, 129 insertions(+), 78 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-02-12 17:06 York Sun
@ 2018-02-12 22:32 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-02-12 22:32 UTC (permalink / raw)
To: u-boot
On Mon, Feb 12, 2018 at 05:06:35PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 1811a928c6c7604d6d05a84b4d552a7c31b4994e:
>
> Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig (2018-02-08 19:09:03 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to ee3556bcafbb05e59aabdc31368984e76acaabc4:
>
> drivers/ddr/fsl: Dual-license DDR driver (2018-02-09 08:36:40 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180212/337c8fc3/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-01-31 23:04 York Sun
2018-02-01 13:08 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-01-31 23:04 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit ae5326a6b34b34b1827edf2eee1a0e9e5363c5a2:
serial: Make full device search optional (2018-01-29 08:18:02 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 58932ec68cdcd574c85620e285a7b95a49551603:
armv8: ls2088ardb: Add 3DS RDIMM support (2018-01-30 09:14:07 -0800)
----------------------------------------------------------------
Ashish Kumar (1):
armv8: ls1088a: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs
Yogesh Gaur (1):
driver: fsl-mc: Perform fsl-mc fdt fixup for lazyapply dpl
York Sun (8):
drivers/ddr/fsl: Fix DDR4 RDIMM support
drivers/ddr/fsl: Fix workaround for A009803
drivers/ddr/fsl: Add 3DS RDIMM support
drivers/ddr/fsl: Add calculation of register control words
drivers/ddr/fsl: Modify binding registers to save time on data init
drivers/ddr/fsl: Cleanup unused variable
armv8: ls1046ardb: Add RDIMM support
armv8: ls2088ardb: Add 3DS RDIMM support
board/freescale/ls1046ardb/ddr.c | 9 +-
board/freescale/ls1046ardb/ddr.h | 19 ++++
board/freescale/ls2080ardb/ddr.c | 2 +
board/freescale/ls2080ardb/ddr.h | 23 +---
configs/ls1088aqds_sdcard_qspi_defconfig | 1 +
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 1 +
configs/ls1088ardb_sdcard_qspi_defconfig | 1 +
drivers/ddr/fsl/ctrl_regs.c | 122
+++++++++++++++------
drivers/ddr/fsl/ddr1_dimm_params.c | 1 -
drivers/ddr/fsl/ddr2_dimm_params.c | 1 -
drivers/ddr/fsl/ddr3_dimm_params.c | 1 -
drivers/ddr/fsl/ddr4_dimm_params.c | 49 ++++++++-
drivers/ddr/fsl/fsl_ddr_gen4.c | 62 +++++++++--
drivers/ddr/fsl/interactive.c | 23 +++-
drivers/ddr/fsl/lc_common_dimm_params.c | 8 +-
drivers/ddr/fsl/options.c | 9 +-
drivers/net/fsl-mc/mc.c | 4 +-
include/common_timing_params.h | 1 +
include/ddr_spd.h | 8 +-
include/fdt_support.h | 3 +
include/fsl_ddr_dimm_params.h | 9 +-
include/fsl_ddr_sdram.h | 5 +-
22 files changed, 272 insertions(+), 90 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-31 23:04 York Sun
@ 2018-02-01 13:08 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-02-01 13:08 UTC (permalink / raw)
To: u-boot
On Wed, Jan 31, 2018 at 11:04:00PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit ae5326a6b34b34b1827edf2eee1a0e9e5363c5a2:
>
> serial: Make full device search optional (2018-01-29 08:18:02 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 58932ec68cdcd574c85620e285a7b95a49551603:
>
> armv8: ls2088ardb: Add 3DS RDIMM support (2018-01-30 09:14:07 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180201/d5be4bc7/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-01-24 2:00 York Sun
2018-01-24 16:28 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-01-24 2:00 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 485c13c7536731991c59f7b3432bc33c9dafb0f0:
Merge git://git.denx.de/u-boot-dm (2018-01-21 20:13:29 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
6c8945ec41cb7bff27fbacc88316e3e557c20240
for you to fetch changes up to 6c8945ec41cb7bff27fbacc88316e3e557c20240:
armv8: ls1088a: Add IFC and eMMC as qixis boot sources (2018-01-23
11:26:21 -0800)
----------------------------------------------------------------
Ashish Kumar (2):
fsl: common: qixis: Add ifc and emmc switching via qixis
armv8: ls1088a: Add IFC and eMMC as qixis boot sources
Breno Lima (1):
crypto/fsl: Fix HW accelerated hash commands
Pankaj Bansal (1):
ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
Rajesh Bhagat (11):
armv8: lsch3: Add serdes and DDR voltage setup
board: common:vid: Add LS1088A VID Supported voltage values
board: common: vid: Add board specific vdd adjust API
board: common: vid: Move IR chip specific code in flag
Kconfig: Add LTC3882 voltage regulator config
board: common: vid: Add support for LTC3882 voltage regulator chip
ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs
ls1088a: ddr: configure DDR for 0.9v for VID support
common: board_f: vid: Add VID specific API to adjust core voltage
ls1088a: Add VID support for QDS and RDB platforms
armv8: ls1088a: vid: Compiling VID specific functions for SPL
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 287
+++++++++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 39 +++
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 3 +
arch/arm/dts/fsl-ls1012a-frdm.dts | 2 +-
arch/arm/dts/fsl-ls1012a-frdm.dtsi | 2 +-
arch/arm/dts/fsl-ls1012a-qds.dts | 2 +-
arch/arm/dts/fsl-ls1012a-qds.dtsi | 2 +-
arch/arm/dts/fsl-ls1012a-rdb.dts | 2 +-
arch/arm/dts/fsl-ls1012a-rdb.dtsi | 4 +-
arch/arm/dts/fsl-ls1012a.dtsi | 2 +-
arch/arm/dts/fsl-ls1043a-qds-duart.dts | 2 +-
arch/arm/dts/fsl-ls1043a-qds-lpuart.dts | 2 +-
arch/arm/dts/fsl-ls1043a-qds.dtsi | 4 +-
arch/arm/dts/fsl-ls1043a-rdb.dts | 4 +-
arch/arm/dts/fsl-ls1043a.dtsi | 4 +-
arch/arm/dts/fsl-ls1046a-qds-duart.dts | 2 +-
arch/arm/dts/fsl-ls1046a-qds-lpuart.dts | 2 +-
arch/arm/dts/fsl-ls1046a-qds.dtsi | 4 +-
arch/arm/dts/fsl-ls1046a-rdb.dts | 4 +-
arch/arm/dts/fsl-ls1046a.dtsi | 4 +-
arch/arm/dts/fsl-ls1088a-qds.dts | 2 +-
arch/arm/dts/fsl-ls1088a-rdb.dts | 2 +-
arch/arm/dts/fsl-ls1088a.dtsi | 2 +-
arch/arm/dts/fsl-ls2080a-qds.dts | 2 +-
arch/arm/dts/fsl-ls2080a-rdb.dts | 2 +-
arch/arm/dts/fsl-ls2080a.dtsi | 2 +-
arch/arm/dts/fsl-ls2081a-rdb.dts | 2 +-
arch/arm/dts/fsl-ls2088a-rdb-qspi.dts | 2 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 43 ++-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 1 +
board/freescale/common/Kconfig | 16 ++
board/freescale/common/Makefile | 2 +-
board/freescale/common/qixis.c | 22 ++
board/freescale/common/vid.c | 147 ++++++++++-
board/freescale/ls1088a/ddr.c | 21 ++
board/freescale/ls1088a/ls1088a.c | 131 ++++++++++
common/board_f.c | 10 +
common/hash.c | 7 +-
drivers/crypto/fsl/fsl_hash.c | 20 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 4 +-
include/common.h | 3 +
include/configs/ls1088aqds.h | 31 +++
include/configs/ls1088ardb.h | 29 +++
44 files changed, 835 insertions(+), 47 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-24 2:00 York Sun
@ 2018-01-24 16:28 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-01-24 16:28 UTC (permalink / raw)
To: u-boot
On Wed, Jan 24, 2018 at 02:00:58AM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 485c13c7536731991c59f7b3432bc33c9dafb0f0:
>
> Merge git://git.denx.de/u-boot-dm (2018-01-21 20:13:29 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
> 6c8945ec41cb7bff27fbacc88316e3e557c20240
>
> for you to fetch changes up to 6c8945ec41cb7bff27fbacc88316e3e557c20240:
>
> armv8: ls1088a: Add IFC and eMMC as qixis boot sources (2018-01-23
> 11:26:21 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180124/24de1156/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-01-17 18:33 York Sun
2018-01-18 13:45 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-01-17 18:33 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 3dde8f20377c3a051dda64497bdf0cdb23e03a2d:
Merge git://git.denx.de/u-boot-mmc (2018-01-14 22:26:38 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 2eb2dbd4577898bf289e911b2286df3f2363af6e:
armv8: ls1088ardb: Add environment variable address location for
QSPI-NOR (2018-01-17 10:30:54 -0800)
----------------------------------------------------------------
Ashish Kumar (3):
armv8: ls1088: Add USB and PCI configs in SD-BOOT defconfig
env: sf: Add support for env init for QSPI-NOR
armv8: ls1088ardb: Add environment variable address location for
QSPI-NOR
Bhaskar Upadhaya (2):
armv8/kconfig: Align boards of same family at one place
board: ls1012a: LS1012A-2G5RDB board support
Priyanka Jain (2):
board/ls2081ardb: Update board related prints
board/ls2081ard: Correct code to get QMAP value in checkboard
Sriram Dash (1):
serial: lpuart: Proper device identification
Sumit Garg (1):
configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE
Tom Rini (3):
powerpc: P1010RDB: Rework local command to not be included in SPL
arm: ls1021atwr: Rework local commands to not be included in SPL
freescale: Ensure common commands are not included in SPL binary
Yuantian Tang (2):
arm64: ls1046a: Add sata distro boot support
arm64: ls1012a: Add sata distro boot support
Zhang Ying-22455 (1):
armv8/ls1088a: configure PMU's PCTBENR to enable WDT
arch/arm/Kconfig | 12 +++
arch/arm/cpu/armv8/Kconfig | 5 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 4 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/fsl-ls1012a-2g5rdb.dts | 43 ++++++++++
board/freescale/common/Kconfig | 2 +
board/freescale/common/cmd_esbc_validate.c | 2 +
board/freescale/common/qixis.c | 14 ++--
board/freescale/ls1012ardb/Kconfig | 18 +++++
board/freescale/ls1012ardb/MAINTAINERS | 7 ++
board/freescale/ls1012ardb/README | 43 ++++++++++
board/freescale/ls1012ardb/ls1012ardb.c | 7 +-
board/freescale/ls1021atwr/ls1021atwr.c | 91 +++++++++++----------
board/freescale/ls2080ardb/ls2080ardb.c | 4 +-
board/freescale/p1010rdb/p1010rdb.c | 2 +
configs/ls1012a2g5rdb_qspi_defconfig | 40 ++++++++++
configs/ls1088aqds_sdcard_qspi_defconfig | 12 +++
configs/ls1088ardb_sdcard_qspi_defconfig | 12 +++
drivers/serial/serial_lpuart.c | 18 ++---
env/sf.c | 21 +++++
include/configs/ls1012a2g5rdb.h | 122
+++++++++++++++++++++++++++++
include/configs/ls1012a_common.h | 11 +++
include/configs/ls1012aqds.h | 10 ---
include/configs/ls1012ardb.h | 9 ---
include/configs/ls1046a_common.h | 13 +++
include/configs/ls1046aqds.h | 10 ---
include/configs/ls1046ardb.h | 12 ---
include/configs/ls1088a_common.h | 6 ++
include/configs/ls1088aqds.h | 1 -
include/configs/ls1088ardb.h | 1 -
30 files changed, 439 insertions(+), 114 deletions(-)
create mode 100644 arch/arm/dts/fsl-ls1012a-2g5rdb.dts
create mode 100644 configs/ls1012a2g5rdb_qspi_defconfig
create mode 100644 include/configs/ls1012a2g5rdb.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-17 18:33 York Sun
@ 2018-01-18 13:45 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-01-18 13:45 UTC (permalink / raw)
To: u-boot
On Wed, Jan 17, 2018 at 06:33:26PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 3dde8f20377c3a051dda64497bdf0cdb23e03a2d:
>
> Merge git://git.denx.de/u-boot-mmc (2018-01-14 22:26:38 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 2eb2dbd4577898bf289e911b2286df3f2363af6e:
>
> armv8: ls1088ardb: Add environment variable address location for
> QSPI-NOR (2018-01-17 10:30:54 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180118/24e04b63/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-01-11 4:57 York Sun
2018-01-11 18:42 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-01-11 4:57 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
Prepare v2018.01 (2018-01-08 20:25:29 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 1cabeb88ebbae0e5d418333cdd2526b06b397c91:
ls1088ardb: Add SD Secure boot target support (2018-01-10 12:32:45 -0800)
----------------------------------------------------------------
Ahmed Mansour (2):
drivers/misc: Share qbman init between archs
configs: Move SYS_DPAA_QBMAN to Kconfig
Alison Wang (1):
armv8: Implement workaround for Cortex-A53 erratum 855873
Ashish Kumar (1):
armv8: ls1088 : MC alignment should always be fixed to 512MB
Bao Xiaowei (1):
Powerpc: T208xQDS: Modify the comment of the CONFIG_FSL_PCIE_RESET
macro
Sumit Garg (3):
armv8: fsl-layerscape: SPL size reduction
armv8: ls1088a: SPL size reduction
ls1088ardb: Add SD Secure boot target support
Yuantian Tang (1):
armv8: layerscape: sata: refine port register configuration
arch/arm/Kconfig | 3 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 6 +-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 4 +
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 9 +
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 14 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 6 +
arch/arm/cpu/armv8/start.S | 24 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 29 ++
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 2 +
arch/arm/include/asm/arch-fsl-layerscape/speed.h | 3 +
arch/arm/include/asm/fsl_secure_boot.h | 16 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 3 +-
arch/powerpc/cpu/mpc85xx/fdt.c | 1 +
arch/powerpc/cpu/mpc85xx/portals.c | 281
-------------------
arch/powerpc/include/asm/fsl_liodn.h | 7 +-
arch/powerpc/include/asm/fsl_portals.h | 4 -
arch/powerpc/include/asm/immap_85xx.h | 60 ----
board/freescale/ls1088a/MAINTAINERS | 5 +
board/freescale/ls1088a/Makefile | 4 +-
board/freescale/ls1088a/ls1088a.c | 16 +-
board/freescale/p1023rdb/p1023rdb.c | 3 +-
board/keymile/kmp204x/kmp204x.c | 2 +-
board/varisys/cyrus/cyrus.c | 2 +-
configs/T1024QDS_DDR4_defconfig | 1 +
.../ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig | 44 +++
drivers/misc/Makefile | 1 +
drivers/misc/fsl_portals.c | 305
+++++++++++++++++++++
drivers/net/Kconfig | 24 ++
include/configs/B4860QDS.h | 1 -
include/configs/P1023RDB.h | 1 -
include/configs/P2041RDB.h | 1 -
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/T104xRDB.h | 1 -
include/configs/T208xQDS.h | 4 +-
include/configs/T208xRDB.h | 1 -
include/configs/T4240QDS.h | 1 -
include/configs/T4240RDB.h | 1 -
include/configs/corenet_ds.h | 1 -
include/configs/cyrus.h | 1 -
include/configs/km/kmp204x-common.h | 1 -
include/configs/ls1046a_common.h | 4 -
include/configs/ls1088a_common.h | 34 ++-
include/configs/ls1088ardb.h | 20 ++
include/fsl_qbman.h | 75 +++++
47 files changed, 641 insertions(+), 390 deletions(-)
create mode 100644 configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
create mode 100644 drivers/misc/fsl_portals.c
create mode 100644 include/fsl_qbman.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-11 4:57 York Sun
@ 2018-01-11 18:42 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2018-01-11 18:42 UTC (permalink / raw)
To: u-boot
On Thu, Jan 11, 2018 at 04:57:39AM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit f3dd87e0b98999a78e500e8c6d2b063ebadf535a:
>
> Prepare v2018.01 (2018-01-08 20:25:29 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 1cabeb88ebbae0e5d418333cdd2526b06b397c91:
>
> ls1088ardb: Add SD Secure boot target support (2018-01-10 12:32:45 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180111/4e18175a/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2018-01-05 1:19 York Sun
2018-01-05 16:00 ` York Sun
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2018-01-05 1:19 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit ca833ca9579b29c5667ea2fa7a9d3f89f1599a94:
Merge git://git.denx.de/u-boot-rockchip (2018-01-03 12:27:12 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 2080e50dd38723a50c84715b88c3493b853893ec:
crypto/fsl: fix BLOB encapsulation and decapsulation (2018-01-04
17:16:56 -0800)
----------------------------------------------------------------
Clemens Gruber (1):
crypto/fsl: fix BLOB encapsulation and decapsulation
drivers/crypto/fsl/fsl_blob.c | 99
++++++++++++++++++++++++++++++++++++-------
include/fsl_sec.h | 4 +-
2 files changed, 85 insertions(+), 18 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2018-01-05 1:19 York Sun
@ 2018-01-05 16:00 ` York Sun
0 siblings, 0 replies; 147+ messages in thread
From: York Sun @ 2018-01-05 16:00 UTC (permalink / raw)
To: u-boot
Tom,
Please abort this PR. More review comments came in last night.
(Somehow I sent to wrong address anyway.)
York
On 01/04/2018 05:19 PM, York Sun wrote:
> Tom,
>
> The following changes since commit ca833ca9579b29c5667ea2fa7a9d3f89f1599a94:
>
> Merge git://git.denx.de/u-boot-rockchip (2018-01-03 12:27:12 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 2080e50dd38723a50c84715b88c3493b853893ec:
>
> crypto/fsl: fix BLOB encapsulation and decapsulation (2018-01-04
> 17:16:56 -0800)
>
> ----------------------------------------------------------------
> Clemens Gruber (1):
> crypto/fsl: fix BLOB encapsulation and decapsulation
>
> drivers/crypto/fsl/fsl_blob.c | 99
> ++++++++++++++++++++++++++++++++++++-------
> include/fsl_sec.h | 4 +-
> 2 files changed, 85 insertions(+), 18 deletions(-)
>
> Thanks.
>
> York
>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-12-18 16:26 York Sun
2017-12-19 1:56 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-12-18 16:26 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit cf71338ee7a1dc16f13a4f1b89f32c624210df45:
ata: Migrate CONFIG_MVSATA_IDE to Kconfig (2017-12-12 18:16:06 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 1b7910a37ccc889e1b58a5f6e095a39728564bb8:
armv8: ls1046aqds: Adjust IFC timing for NOR flash (2017-12-18
08:25:07 -0800)
----------------------------------------------------------------
Rajesh Bhagat (2):
arm64: ls1012ardb: Add distro boot support
arm64: ls1012afrdm: Add distro boot support
Wenbin song (2):
armv8: ls1043a/ls2080a: check SoC by device ID
armv8: layerscape: Discard the needless cpu nodes
Yangbo Lu (4):
armv8: ls1088ardb: support force SDHC mode by hwconfig
armv8: ls1012ardb: clean up definitions for I2C IO expanders
armv8: ls1012ardb: add more board version information
armv8: ls1012ardb: support hwconfig for eSDHC1 enabling
Yogesh Gaur (1):
board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt
York Sun (3):
armv8: ls2080a: Increase load image len for NAND boot
armv8: ls2085a: Update README file for NAND boot
armv8: ls1046aqds: Adjust IFC timing for NOR flash
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 8 +-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 | 8 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 31 +++++++-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 9 +--
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 +-
board/freescale/ls1012ardb/ls1012ardb.c | 89
+++++++++++++++-------
board/freescale/ls1088a/ls1088a.c | 20 ++++-
board/freescale/ls1088a/ls1088a_qixis.h | 6 ++
board/freescale/ls2080a/ls2080a.c | 2 +-
board/freescale/ls2080aqds/ls2080aqds.c | 2 +-
board/freescale/ls2080ardb/ls2080ardb.c | 2 +-
configs/ls1012afrdm_qspi_defconfig | 1 +
configs/ls1012ardb_qspi_defconfig | 1 +
drivers/net/fsl-mc/dpio/qbman_private.h | 4 +-
drivers/usb/common/fsl-errata.c | 7 +-
include/configs/ls1012a_common.h | 10 ++-
include/configs/ls1012afrdm.h | 57 +++++++++++---
include/configs/ls1012ardb.h | 66 ++++++++++++++--
include/configs/ls1046aqds.h | 5 +-
include/configs/ls1088ardb.h | 2 +
include/configs/ls2080a_common.h | 2 +-
21 files changed, 264 insertions(+), 72 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-12-18 16:26 York Sun
@ 2017-12-19 1:56 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-12-19 1:56 UTC (permalink / raw)
To: u-boot
On Mon, Dec 18, 2017 at 04:26:24PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit cf71338ee7a1dc16f13a4f1b89f32c624210df45:
>
> ata: Migrate CONFIG_MVSATA_IDE to Kconfig (2017-12-12 18:16:06 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 1b7910a37ccc889e1b58a5f6e095a39728564bb8:
>
> armv8: ls1046aqds: Adjust IFC timing for NOR flash (2017-12-18
> 08:25:07 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171218/4d5a195b/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-12-07 22:43 York Sun
2017-12-08 2:49 ` Tom Rini
2017-12-08 14:31 ` Tom Rini
0 siblings, 2 replies; 147+ messages in thread
From: York Sun @ 2017-12-07 22:43 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 9da7fb4a39149c3061cb148bfbaa76b4b52b9008:
Prepare v2018.01-rc1 (2017-12-04 18:27:17 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
d798a6ee6436c7d2bcbf3fa6bda01daa4411a493
for you to fetch changes up to d798a6ee6436c7d2bcbf3fa6bda01daa4411a493:
armv8: ls1088a: Add nand support for ls1088ardb (2017-12-06 14:56:31
-0800)
----------------------------------------------------------------
Ashish Kumar (3):
armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfig
armv8: ls1088: Add fsl_fdt_fixup_flash
armv8: ls1088a: Add nand support for ls1088ardb
Bhaskar Upadhaya (1):
armv8: ls1012a: Modify Kernel and Environment offset
Prabhakar Kushwaha (1):
armv8: fsl-layerscape: Add support of disabling core prefetch
Ran Wang (1):
armv8: Workaround for USB erratua on LS1012A
Udit Agarwal (3):
armv8: LS1088A_QSPI: SECURE_BOOT: Images validation
armv8: LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.
armv8: LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.
Vinitha Pillai-B57223 (1):
SECURE BOOT: Add fall back option
Yogesh Gaur (2):
driver: net: fsl-mc: flib changes for MC 10.3.0
driver: fsl-mc: MC object cleanup when DPL not loaded
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 5 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 38 +
.../armv8/fsl-layerscape/doc/README.core_prefetch | 20 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 27 +-
board/freescale/ls1088a/Kconfig | 2 +
board/freescale/ls1088a/MAINTAINERS | 12 +
board/freescale/ls1088a/ls1088a.c | 35 +-
configs/ls1088aqds_qspi_SECURE_BOOT_defconfig | 47 +
configs/ls1088aqds_qspi_defconfig | 1 +
configs/ls1088aqds_sdcard_qspi_defconfig | 1 +
configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 48 +
configs/ls1088ardb_qspi_defconfig | 1 +
configs/ls1088ardb_sdcard_qspi_defconfig | 1 +
configs/ls2080aqds_SECURE_BOOT_defconfig | 5 +-
configs/ls2080ardb_SECURE_BOOT_defconfig | 5 +-
drivers/net/fsl-mc/dpbp.c | 42 +-
drivers/net/fsl-mc/dpio/dpio.c | 43 +-
drivers/net/fsl-mc/dpmac.c | 41 +-
drivers/net/fsl-mc/dpni.c | 332 ++----
drivers/net/fsl-mc/dprc.c | 27 +-
drivers/net/fsl-mc/fsl_dpmng_cmd.h | 5 +-
drivers/net/fsl-mc/mc.c | 240 +++--
drivers/net/ldpaa_eth/ldpaa_eth.c | 283 +++---
drivers/net/ldpaa_eth/ldpaa_eth.h | 5 +-
include/configs/ls1012a_common.h | 4 +-
include/configs/ls1012afrdm.h | 2 +-
include/configs/ls1021atwr.h | 33 +-
include/configs/ls1043a_common.h | 31 +-
include/configs/ls1046a_common.h | 12 +-
include/configs/ls1046ardb.h | 8 +-
include/configs/ls1088a_common.h | 3 -
include/configs/ls1088aqds.h | 21 +
include/configs/ls1088ardb.h | 52 +-
include/fsl-mc/fsl_dpbp.h | 62 +-
include/fsl-mc/fsl_dpio.h | 64 +-
include/fsl-mc/fsl_dpmac.h | 69 +-
include/fsl-mc/fsl_dpni.h | 1065
+++++++-------------
include/fsl-mc/fsl_dprc.h | 79 +-
include/fsl-mc/fsl_mc_cmd.h | 50 +-
include/fsl-mc/fsl_mc_private.h | 8 +-
40 files changed, 1445 insertions(+), 1384 deletions(-)
create mode 100644
arch/arm/cpu/armv8/fsl-layerscape/doc/README.core_prefetch
create mode 100644 configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
create mode 100644 configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-12-07 22:43 York Sun
@ 2017-12-08 2:49 ` Tom Rini
2017-12-08 14:31 ` Tom Rini
1 sibling, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-12-08 2:49 UTC (permalink / raw)
To: u-boot
On Thu, Dec 07, 2017 at 10:43:15PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 9da7fb4a39149c3061cb148bfbaa76b4b52b9008:
>
> Prepare v2018.01-rc1 (2017-12-04 18:27:17 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
> d798a6ee6436c7d2bcbf3fa6bda01daa4411a493
>
> for you to fetch changes up to d798a6ee6436c7d2bcbf3fa6bda01daa4411a493:
>
> armv8: ls1088a: Add nand support for ls1088ardb (2017-12-06 14:56:31
> -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171207/36a2371d/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-12-07 22:43 York Sun
2017-12-08 2:49 ` Tom Rini
@ 2017-12-08 14:31 ` Tom Rini
1 sibling, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-12-08 14:31 UTC (permalink / raw)
To: u-boot
On Thu, Dec 07, 2017 at 10:43:15PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 9da7fb4a39149c3061cb148bfbaa76b4b52b9008:
>
> Prepare v2018.01-rc1 (2017-12-04 18:27:17 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
> d798a6ee6436c7d2bcbf3fa6bda01daa4411a493
>
> for you to fetch changes up to d798a6ee6436c7d2bcbf3fa6bda01daa4411a493:
>
> armv8: ls1088a: Add nand support for ls1088ardb (2017-12-06 14:56:31
> -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171208/32382e5e/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-10-27 21:29 York Sun
2017-10-29 11:58 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-10-27 21:29 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit ce0dea889a01d06bdc2d845fd03e90bcf8b49fec:
Merge git://git.denx.de/u-boot-uniphier (2017-10-22 19:21:04 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 9b3f40ad092ff2633eefa7e8a4a713f71c9cb8cb:
armv8: sec_firmware: Add support for loadables in FIT (2017-10-27
08:47:14 -0700)
----------------------------------------------------------------
Ashish Kumar (2):
armv8: ls1088: Move CONFIG_ENV_IS_IN_SPI_FLASH to defconfig
armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID
Prabhakar Kushwaha (1):
driver: fsl-mc: use calloc instead malloc
Ran Wang (5):
arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to Kconfig
usb: host: Move CONFIG_XHCI_FSL to Kconfig
arm: layerscape: Remove CONFIG_USB_MAX_CONTROLLER_COUNT
armv8: ls1088ardb: Enable USB command RDB qspi-boot
armv8: ls1088aqds: Enable USB command on QDS for qspi-boot
Sumit Garg (2):
armv8: layerscape: Allocate 66 MB DDR for secure memory
armv8: sec_firmware: Add support for loadables in FIT
York Sun (1):
powerpc: mpc85xx: Implement CPU erratum A-007907 for secondary cores
Yuantian Tang (1):
armv8: configs: ls1012a: correct the generic timer frequency
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ++
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 16 +++-
arch/arm/cpu/armv8/sec_firmware.c | 92
++++++++++++++++++++++-
arch/arm/dts/fsl-ls1088a.dtsi | 14 ++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 2 +-
arch/arm/include/asm/armv8/sec_firmware.h | 4 +-
arch/powerpc/cpu/mpc85xx/release.S | 6 ++
board/freescale/ls1088a/eth_ls1088aqds.c | 1 +
configs/ls1088aqds_qspi_defconfig | 9 +++
configs/ls1088ardb_qspi_defconfig | 9 +++
drivers/net/fsl-mc/mc.c | 39 +++++-----
drivers/net/ldpaa_eth/ls1088a.c | 4 +-
drivers/usb/host/Kconfig | 6 ++
include/configs/ls1012a_common.h | 2 +-
include/configs/ls1012afrdm.h | 10 ---
include/configs/ls1012aqds.h | 8 --
include/configs/ls1012ardb.h | 9 ---
include/configs/ls1021aiot.h | 8 --
include/configs/ls1021aqds.h | 8 --
include/configs/ls1021atwr.h | 8 --
include/configs/ls1043aqds.h | 7 --
include/configs/ls1043ardb.h | 9 ---
include/configs/ls1046aqds.h | 7 --
include/configs/ls1046ardb.h | 9 ---
include/configs/ls1088aqds.h | 1 -
include/configs/ls1088ardb.h | 1 -
include/configs/ls2080aqds.h | 7 --
include/configs/ls2080ardb.h | 7 --
include/linux/usb/xhci-fsl.h | 2 +-
scripts/config_whitelist.txt | 2 -
30 files changed, 182 insertions(+), 132 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-10-27 21:29 York Sun
@ 2017-10-29 11:58 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-10-29 11:58 UTC (permalink / raw)
To: u-boot
On Fri, Oct 27, 2017 at 09:29:43PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit ce0dea889a01d06bdc2d845fd03e90bcf8b49fec:
>
> Merge git://git.denx.de/u-boot-uniphier (2017-10-22 19:21:04 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 9b3f40ad092ff2633eefa7e8a4a713f71c9cb8cb:
>
> armv8: sec_firmware: Add support for loadables in FIT (2017-10-27
> 08:47:14 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171029/cd206fbd/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-10-12 14:51 York Sun
2017-10-12 22:29 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-10-12 14:51 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 39dd65a059e503883dbf16d4c00ac083d15837da:
sandbox: Enable btrfs support (2017-10-03 08:44:55 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 23af484b0156baaafd578222d73513418df78f09:
armv8: ls1043ardb_sdcard: prepare falcon boot (2017-10-09 08:48:45 -0700)
----------------------------------------------------------------
Bogdan Purcareata (1):
armv8: ls1088a: Update MC boot sequence
Fabio Estevam (1):
armv7: ls1021aiot: Move CONFIG_CMD_BOOTZ to Kconfig
Gong Qianyu (1):
armv8: ls1046aqds: Fix NAND offset for Fman ucode and env
Ran Wang (1):
armv8: Apply workaround for USB erratum A-009007 to LS1088A
Sumit Garg (1):
armv8: fsl-layerscape: Allocate Secure memory from first ddr region
York Sun (7):
spl: fix assignment of board info to global data
cmd: spl: fix compiling error when CONFIG_CMD_SPL_WRITE_SIZE not
defined
armv8: fsl-layerscape: Avoid running dram_init_banksize again
armv8: ls1043ardb: Use static DDR setting for SPL boot
armv8: layerscape: Enable falcon boot
armv8: ls1043ardb: Enable spl_board_init() function
armv8: ls1043ardb_sdcard: prepare falcon boot
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 77 ++++++------
.../arm/cpu/armv8/fsl-layerscape/doc/README.falcon | 140
+++++++++++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 26 ++++
arch/arm/include/asm/system.h | 4 +-
arch/arm/lib/spl.c | 11 ++
board/freescale/ls1043ardb/ddr.c | 46 +++++++
board/freescale/ls1043ardb/ddr.h | 69 ++++++++++
board/freescale/ls1088a/eth_ls1088aqds.c | 14 ++-
board/freescale/ls1088a/eth_ls1088ardb.c | 13 +-
cmd/spl.c | 2 +
common/spl/spl.c | 10 +-
configs/ls1021aiot_qspi_defconfig | 1 +
configs/ls1021aiot_sdcard_defconfig | 1 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_nand_defconfig | 1 +
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_sdcard_defconfig | 2 +
include/configs/ls1021aiot.h | 1 -
include/configs/ls1043a_common.h | 7 +-
include/configs/ls1043ardb.h | 11 +-
include/configs/ls1046a_common.h | 2 +-
include/configs/ls1046aqds.h | 2 +-
include/configs/ls1088a_common.h | 6 +
include/spl.h | 1 +
26 files changed, 387 insertions(+), 67 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-10-12 14:51 York Sun
@ 2017-10-12 22:29 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-10-12 22:29 UTC (permalink / raw)
To: u-boot
On Thu, Oct 12, 2017 at 02:51:21PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 39dd65a059e503883dbf16d4c00ac083d15837da:
>
> sandbox: Enable btrfs support (2017-10-03 08:44:55 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 23af484b0156baaafd578222d73513418df78f09:
>
> armv8: ls1043ardb_sdcard: prepare falcon boot (2017-10-09 08:48:45 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171012/65354cc1/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-09-23 5:08 York Sun
2017-09-24 14:40 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-09-23 5:08 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 91ebf300934461e450f5ef8f386ea9e55d2636c5:
Travis-CI: Checkout only v1.4.3 of dtc (2017-09-22 07:40:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 09c6778d9f5c85c40d8a81722c98142975c2a01e:
armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
(2017-09-22 12:49:51 -0700)
----------------------------------------------------------------
Ashish Kumar (1):
armv8: fsl-layerscape: Put SATA code under SATA configs
Bharat Bhushan (1):
pci: layerscape: Fixup iommu-map for LS208xA
Priyanka Jain (2):
board/ls2080ardb: Add mcmemsize variable in default env
board/ls2080ardb: Update board env based on SoC
Santan Kumar (2):
board/ls2080ardb: Remove CONFIG_DISPLAY_BOARDINFO_LATE
board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512s
Sriram Dash (2):
armv8: fsl: ifc: Put IFC related code under CONFIG_FSL_IFC
armv8: fsl: i2c: Put I2C related code under CONFIG_SYS_I2C
Yangbo Lu (3):
armv8: ls1043a: disable IFC in SPL only when QSPI is used
armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
York Sun (1):
armv7: ls1021a: Fix marco CONFIG_LS102XA
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 8 +++++++-
arch/arm/dts/fsl-ls2081a-rdb.dts | 4 ++--
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 10 ++++++++++
board/freescale/ls2080ardb/ls2080ardb.c | 12 ++++++++++++
configs/ls1043ardb_sdcard_defconfig | 1 -
configs/ls1046ardb_sdcard_defconfig | 1 -
drivers/pci/pcie_layerscape_fixup.c | 19 ++++++++++++++-----
include/configs/ls1043a_common.h | 2 +-
include/configs/ls2080ardb.h | 8 ++------
include/usb/ehci-ci.h | 2 +-
10 files changed, 49 insertions(+), 18 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-09-23 5:08 York Sun
@ 2017-09-24 14:40 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-09-24 14:40 UTC (permalink / raw)
To: u-boot
On Sat, Sep 23, 2017 at 05:08:51AM +0000, York Sun wrote:
> Tom,
>
>
> The following changes since commit 91ebf300934461e450f5ef8f386ea9e55d2636c5:
>
> Travis-CI: Checkout only v1.4.3 of dtc (2017-09-22 07:40:06 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 09c6778d9f5c85c40d8a81722c98142975c2a01e:
>
> armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
> (2017-09-22 12:49:51 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170924/bdfb4c15/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-09-12 15:59 York Sun
2017-09-12 21:13 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-09-12 15:59 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 584f316f115df52fd09a6cf699b29dcf824b4da5:
cmd: ide: Make the first device the default one (2017-09-10 12:27:43 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 42f43aa25876d1c77002ee5f333ab36dcb01d719:
armv8: fsl-layerscape: Add back L3 flushing for all exception levels (2017-09-11 08:02:13 -0700)
----------------------------------------------------------------
Ashish Kumar (6):
fsl-layerscape: Consolidate registers space defination for CCI-400 bus
armv8: fsl-lsch3: Make CCN-504 related code conditional
armv8: ls1088a: Add NXP LS1088A SoC support
armv8: ls1088ardb: Add support for LS1088ARDB platform
armv8: ls1088aqds: Add support of LS1088AQDS
armv8: fsl-layerscape: Support to add RGMII for ls1088aqds
Hou Zhiqiang (3):
armv8: ls1088a: fix the MMU table for pcie config space
armv8: ls1088a: add PCIe dts node
armv8: ls1088a: Enable PCIe in defconfigs
Prabhakar Kushwaha (1):
armv8: ls1088aqds: Add support of EC1 and EC2
Priyanka Jain (1):
drivers:net:fsl-mc: Update MC address calculation
Ran Wang (10):
armv8: fsl: Use correct conditional compile for ls1012a
armv8: Add scfg_clrsetbits_32(), scfg_clrbits_32()
armv8: Add workaround for USB erratum A-009008
armv8: Add workaround for USB erratum A-009798
armv8: Add workaround for USB erratum A-008997
armv8: Add workaround for USB erratum A-009007
armv7: Add workaround for USB erratum A-009008
armv7: Add workaround for USB erratum A-009798
armv7: Add workaround for USB erratum A-008997
armv7: Add workaround for USB erratum A-009007
Sumit Garg (1):
SECURE_BOOT: Unify memory map for Layerscape based platforms
Suresh Gupta (1):
armv8: fsl-layerscape: Fix final MMU table for QSPI and IFC
Udit Agarwal (2):
LS2080ARDB: QSPI boot: Secure Boot image validation
armv8: LS2080ARDB: Add secure boot defconfig for QSPI boot.
York Sun (7):
tools: pblimage: Fix address calculation
cmd: spl: Fix compiling warning
spl: fit: Eanble GZIP support for image decompression
spl: fit: Support both external and embedded data
spl: fit: Add booting OS first
armv8: fsl-layerscape: Fix MC reserved memory calculation
armv8: fsl-layerscape: Add back L3 flushing for all exception levels
Zhao Qiang (1):
QE: Set QE_IRAM_READY after uploading firmware
README | 13 +
arch/arm/Kconfig | 27 +
arch/arm/cpu/armv7/ls102xa/Kconfig | 36 ++
arch/arm/cpu/armv7/ls102xa/soc.c | 53 +-
arch/arm/cpu/armv8/Kconfig | 1 +
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 113 +++-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 20 +-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 43 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 19 +
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 12 +-
arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c | 126 ++++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 122 +++-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-ls1088a-qds.dts | 70 +++
arch/arm/dts/fsl-ls1088a-rdb.dts | 40 ++
arch/arm/dts/fsl-ls1088a.dtsi | 126 ++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 62 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 10 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 4 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 68 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 34 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 8 +
.../asm/arch-fsl-layerscape/stream_id_lsch3.h | 14 +
arch/arm/include/asm/arch-ls102xa/config.h | 1 -
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 64 +-
arch/arm/include/asm/fsl_secure_boot.h | 59 +-
board/freescale/ls1012afrdm/ls1012afrdm.c | 4 +-
board/freescale/ls1012aqds/ls1012aqds.c | 4 +-
board/freescale/ls1012ardb/ls1012ardb.c | 3 +-
board/freescale/ls1021aqds/ls1021aqds.c | 9 +-
board/freescale/ls1088a/Kconfig | 31 +
board/freescale/ls1088a/MAINTAINERS | 15 +
board/freescale/ls1088a/Makefile | 10 +
board/freescale/ls1088a/README | 145 +++++
board/freescale/ls1088a/ddr.c | 102 +++
board/freescale/ls1088a/ddr.h | 49 ++
board/freescale/ls1088a/eth_ls1088aqds.c | 683 +++++++++++++++++++++
board/freescale/ls1088a/eth_ls1088ardb.c | 102 +++
board/freescale/ls1088a/ls1088a.c | 406 ++++++++++++
board/freescale/ls1088a/ls1088a_qixis.h | 39 ++
board/freescale/ls2080aqds/ls2080aqds.c | 7 +-
board/freescale/ls2080ardb/MAINTAINERS | 5 +
board/freescale/ls2080ardb/ls2080ardb.c | 4 +
cmd/spl.c | 8 +-
common/spl/spl_fit.c | 144 +++--
configs/ls1088aqds_qspi_defconfig | 33 +
configs/ls1088ardb_qspi_defconfig | 33 +
configs/ls2088ardb_qspi_SECURE_BOOT_defconfig | 48 ++
doc/uImage.FIT/multi_spl.its | 7 +
doc/uImage.FIT/source_file_format.txt | 4 +
drivers/ddr/fsl/util.c | 2 +-
drivers/net/fsl-mc/mc.c | 11 +-
drivers/net/ldpaa_eth/Makefile | 1 +
drivers/net/ldpaa_eth/ldpaa_wriop.c | 9 +
drivers/net/ldpaa_eth/ls1088a.c | 114 ++++
drivers/qe/qe.c | 4 +-
include/configs/ls1088a_common.h | 205 +++++++
include/configs/ls1088aqds.h | 414 +++++++++++++
include/configs/ls1088ardb.h | 317 ++++++++++
include/fsl-mc/ldpaa_wriop.h | 2 +
include/fsl_immap.h | 51 ++
lib/Kconfig | 12 +
lib/Makefile | 5 +-
scripts/config_whitelist.txt | 1 -
tools/pblimage.c | 2 +-
67 files changed, 3972 insertions(+), 228 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1088a_serdes.c
create mode 100644 arch/arm/dts/fsl-ls1088a-qds.dts
create mode 100644 arch/arm/dts/fsl-ls1088a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls1088a.dtsi
create mode 100644 board/freescale/ls1088a/Kconfig
create mode 100644 board/freescale/ls1088a/MAINTAINERS
create mode 100644 board/freescale/ls1088a/Makefile
create mode 100644 board/freescale/ls1088a/README
create mode 100644 board/freescale/ls1088a/ddr.c
create mode 100644 board/freescale/ls1088a/ddr.h
create mode 100644 board/freescale/ls1088a/eth_ls1088aqds.c
create mode 100644 board/freescale/ls1088a/eth_ls1088ardb.c
create mode 100644 board/freescale/ls1088a/ls1088a.c
create mode 100644 board/freescale/ls1088a/ls1088a_qixis.h
create mode 100644 configs/ls1088aqds_qspi_defconfig
create mode 100644 configs/ls1088ardb_qspi_defconfig
create mode 100644 configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
create mode 100644 drivers/net/ldpaa_eth/ls1088a.c
create mode 100644 include/configs/ls1088a_common.h
create mode 100644 include/configs/ls1088aqds.h
create mode 100644 include/configs/ls1088ardb.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-09-12 15:59 York Sun
@ 2017-09-12 21:13 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-09-12 21:13 UTC (permalink / raw)
To: u-boot
On Tue, Sep 12, 2017 at 03:59:46PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit 584f316f115df52fd09a6cf699b29dcf824b4da5:
>
> cmd: ide: Make the first device the default one (2017-09-10 12:27:43 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 42f43aa25876d1c77002ee5f333ab36dcb01d719:
>
> armv8: fsl-layerscape: Add back L3 flushing for all exception levels (2017-09-11 08:02:13 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170912/bc42ae1e/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-08-10 15:34 York Sun
2017-08-11 2:19 ` Tom Rini
2017-08-11 14:51 ` Tom Rini
0 siblings, 2 replies; 147+ messages in thread
From: York Sun @ 2017-08-10 15:34 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
20:38:39 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
09:57:33 -0700)
----------------------------------------------------------------
Alison Wang (1):
dm: arm: ls1021a: Move to driver model for USB
Hou Zhiqiang (4):
armv8/fsl-lsch2: correct the config description of DSPI clock divider
fsl-lsch2: csu: remove multiple calling function
PCI: layerscape: Fix assigning wrong address to LS2088A pcie cfg1
space
fsl-lsch2: csu: correct the workaround A-010315
Qianyu Gong (1):
armv8: ls1046ardb: update core frequency to 1800MHZ
Rajesh Bhagat (1):
config: ls1012aqds: Enable USB EHCI support for ls1012aqds
Santan Kumar (5):
board/ls2080ardb: Disable SD-related GPIO programming
board:ls2080ardb: Update execution of config_board_mux
board: ls2080ardb: Add fsl_fdt_fixup_flash
driver: net: fsl-mc: fsl_mc_ldpaa_exit exit earlier if dpl applied
armv8: ls2080a: Increase env sector size for qspi boot
Yang Li (1):
mmc: fsl_esdhc: not always setting esdhc fdt status to okay
York Sun (1):
driver: mmc: fsl_esdhc: Fix compiling warning
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 2 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
board/freescale/common/ns_access.c | 20 +++---
board/freescale/ls1021aiot/ls1021aiot.c | 4 --
board/freescale/ls1021atwr/ls1021atwr.c | 1 -
board/freescale/ls1046aqds/ls1046aqds.c | 4 --
board/freescale/ls1046ardb/ls1046ardb.c | 4 --
board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg | 2 +-
board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg | 2 +-
board/freescale/ls2080ardb/ls2080ardb.c | 71
+++++++++++++---------
configs/ls1021aqds_nand_defconfig | 1 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021aqds_qspi_defconfig | 1 +
configs/ls1021aqds_sdcard_ifc_defconfig | 1 +
configs/ls1021aqds_sdcard_qspi_defconfig | 1 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_nor_defconfig | 1 +
configs/ls1021atwr_nor_lpuart_defconfig | 1 +
configs/ls1021atwr_qspi_defconfig | 1 +
.../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_sdcard_ifc_defconfig | 1 +
configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
drivers/mmc/fsl_esdhc.c | 4 +-
drivers/net/fsl-mc/mc.c | 11 +++-
drivers/pci/pcie_layerscape.c | 3 +
include/configs/ls1012aqds.h | 2 +
include/configs/ls2080a_common.h | 2 +-
include/fsl_csu.h | 2 +-
include/usb/ehci-ci.h | 2 +-
29 files changed, 88 insertions(+), 61 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-10 15:34 York Sun
@ 2017-08-11 2:19 ` Tom Rini
2017-08-11 2:35 ` York Sun
2017-08-11 14:51 ` Tom Rini
1 sibling, 1 reply; 147+ messages in thread
From: Tom Rini @ 2017-08-11 2:19 UTC (permalink / raw)
To: u-boot
On Thu, Aug 10, 2017 at 03:34:49PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
>
> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
> 20:38:39 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
>
> armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
> 09:57:33 -0700)
>
This seems to lead to a number of PowerPC boards failing, can you please
throw this at travis-ci and fix the fallout? See
https://travis-ci.org/trini/u-boot/builds/263245350, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170810/aeb4d6ff/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-11 2:19 ` Tom Rini
@ 2017-08-11 2:35 ` York Sun
2017-08-11 11:13 ` Tom Rini
2017-08-11 14:35 ` Tom Rini
0 siblings, 2 replies; 147+ messages in thread
From: York Sun @ 2017-08-11 2:35 UTC (permalink / raw)
To: u-boot
On 08/10/2017 07:18 PM, Tom Rini wrote:
> On Thu, Aug 10, 2017 at 03:34:49PM +0000, York Sun wrote:
>
>> Tom,
>>
>> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
>>
>> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
>> 20:38:39 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-fsl-qoriq.git
>>
>> for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
>>
>> armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
>> 09:57:33 -0700)
>>
>
> This seems to lead to a number of PowerPC boards failing, can you please
> throw this at travis-ci and fix the fallout? See
> https://travis-ci.org/trini/u-boot/builds/263245350, thanks!
>
I made sure the compiling was OK before request a pull. See
https://travis-ci.org/yorksun/u-boot/builds/262844095.
Your travis build is still on-going. I will check a little bit later.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-11 2:35 ` York Sun
@ 2017-08-11 11:13 ` Tom Rini
2017-08-11 14:35 ` Tom Rini
1 sibling, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-08-11 11:13 UTC (permalink / raw)
To: u-boot
On Fri, Aug 11, 2017 at 02:35:24AM +0000, York Sun wrote:
> On 08/10/2017 07:18 PM, Tom Rini wrote:
> > On Thu, Aug 10, 2017 at 03:34:49PM +0000, York Sun wrote:
> >
> >> Tom,
> >>
> >> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
> >>
> >> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
> >> 20:38:39 -0400)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.denx.de/u-boot-fsl-qoriq.git
> >>
> >> for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
> >>
> >> armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
> >> 09:57:33 -0700)
> >>
> >
> > This seems to lead to a number of PowerPC boards failing, can you please
> > throw this at travis-ci and fix the fallout? See
> > https://travis-ci.org/trini/u-boot/builds/263245350, thanks!
> >
>
> I made sure the compiling was OK before request a pull. See
> https://travis-ci.org/yorksun/u-boot/builds/262844095.
>
> Your travis build is still on-going. I will check a little bit later.
I had re-started some of the failing jobs on the off-chance it was
something else going wrong. I'm re-trying just the QorIQ PR right now,
thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170811/afae83b7/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-11 2:35 ` York Sun
2017-08-11 11:13 ` Tom Rini
@ 2017-08-11 14:35 ` Tom Rini
2017-08-11 14:47 ` York Sun
1 sibling, 1 reply; 147+ messages in thread
From: Tom Rini @ 2017-08-11 14:35 UTC (permalink / raw)
To: u-boot
On Fri, Aug 11, 2017 at 02:35:24AM +0000, York Sun wrote:
> On 08/10/2017 07:18 PM, Tom Rini wrote:
> > On Thu, Aug 10, 2017 at 03:34:49PM +0000, York Sun wrote:
> >
> >> Tom,
> >>
> >> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
> >>
> >> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
> >> 20:38:39 -0400)
> >>
> >> are available in the git repository at:
> >>
> >> git://git.denx.de/u-boot-fsl-qoriq.git
> >>
> >> for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
> >>
> >> armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
> >> 09:57:33 -0700)
> >>
> >
> > This seems to lead to a number of PowerPC boards failing, can you please
> > throw this at travis-ci and fix the fallout? See
> > https://travis-ci.org/trini/u-boot/builds/263245350, thanks!
> >
>
> I made sure the compiling was OK before request a pull. See
> https://travis-ci.org/yorksun/u-boot/builds/262844095.
OK, confirmed, sorry for the noise!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170811/3ce6a716/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-11 14:35 ` Tom Rini
@ 2017-08-11 14:47 ` York Sun
0 siblings, 0 replies; 147+ messages in thread
From: York Sun @ 2017-08-11 14:47 UTC (permalink / raw)
To: u-boot
On 08/11/2017 07:34 AM, Tom Rini wrote:
> On Fri, Aug 11, 2017 at 02:35:24AM +0000, York Sun wrote:
>> On 08/10/2017 07:18 PM, Tom Rini wrote:
>>> On Thu, Aug 10, 2017 at 03:34:49PM +0000, York Sun wrote:
>>>
>>>> Tom,
>>>>
>>>> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
>>>>
>>>> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
>>>> 20:38:39 -0400)
>>>>
>>>> are available in the git repository at:
>>>>
>>>> git://git.denx.de/u-boot-fsl-qoriq.git
>>>>
>>>> for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
>>>>
>>>> armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
>>>> 09:57:33 -0700)
>>>>
>>>
>>> This seems to lead to a number of PowerPC boards failing, can you please
>>> throw this at travis-ci and fix the fallout? See
>>> https://travis-ci.org/trini/u-boot/builds/263245350, thanks!
>>>
>>
>> I made sure the compiling was OK before request a pull. See
>> https://travis-ci.org/yorksun/u-boot/builds/262844095.
>
> OK, confirmed, sorry for the noise!
>
Glad it passed.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-10 15:34 York Sun
2017-08-11 2:19 ` Tom Rini
@ 2017-08-11 14:51 ` Tom Rini
1 sibling, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-08-11 14:51 UTC (permalink / raw)
To: u-boot
On Thu, Aug 10, 2017 at 03:34:49PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit eaa90e5df2a4a1cb12fb73571978a9379242d0b5:
>
> common/env_embedded.c: rename PPCENV/PPCTEXT macros (2017-08-04
> 20:38:39 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 1c83df6f3f95055ed1c8fb40d1d0604863eab78b:
>
> armv8: ls2080a: Increase env sector size for qspi boot (2017-08-09
> 09:57:33 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170811/37904e75/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-08-01 22:56 York Sun
2017-08-01 23:34 ` Bin Meng
2017-08-03 19:07 ` Tom Rini
0 siblings, 2 replies; 147+ messages in thread
From: York Sun @ 2017-08-01 22:56 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414:
Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
ec85721c8b94f9eb6807ebb15a223e4ec49a092a
for you to fetch changes up to ec85721c8b94f9eb6807ebb15a223e4ec49a092a:
arm64: ls2088ardb: Add distro secure boot support (2017-08-01
08:28:57 -0700)
----------------------------------------------------------------
Alexander Stein (1):
spi: fsl_qspi: Pet watchdog even more
Alison Wang (2):
arm: ls1021atwr: Add distro boot support
armv8: Remove duplicate definition for IH_ARCH_ARM and IH_ARCH_ARM64
Qianyu Gong (2):
armv8: ls1046a: move CONFIG_CMD_USB to defconfig
arm64: ls1046ardb: Add distro boot support
Santan Kumar (3):
board/ls2080aqds, SD-boot: Update env offset
fsl/usb: enable errata-a010151 for ls2088a and ls2081a
soc/fsl-layerscape: Update SVR number for LS2081A and LS2041A
Shengzhou Liu (1):
arm64: ls1043ardb: Add distro boot support
Sumit Garg (3):
arm64: ls1043ardb: Add distro secure boot support
arm64: ls1046ardb: Add distro secure boot support
arm: ls1021atwr: Add distro secure boot support
VINITHA PILLAI (1):
arm64: ls2088ardb: Add distro secure boot support
Zhang Ying-22455 (1):
arm64: ls2088ardb: Add distro boot support
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 8 +-
arch/arm/cpu/armv8/fsl-layerscape/mp.c | 11 +-
arch/arm/include/asm/arch-fsl-layerscape/mp.h | 13 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 +-
board/freescale/common/fsl_chain_of_trust.c | 6 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_nor_defconfig | 1 +
.../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 +
configs/ls1021atwr_sdcard_ifc_defconfig | 1 +
configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
configs/ls1043ardb_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_defconfig | 1 +
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_sdcard_defconfig | 1 +
configs/ls1046aqds_SECURE_BOOT_defconfig | 1 +
configs/ls1046aqds_defconfig | 1 +
configs/ls1046aqds_lpuart_defconfig | 1 +
configs/ls1046aqds_nand_defconfig | 1 +
configs/ls1046aqds_qspi_defconfig | 1 +
configs/ls1046aqds_sdcard_ifc_defconfig | 1 +
configs/ls1046aqds_sdcard_qspi_defconfig | 1 +
configs/ls1046ardb_emmc_defconfig | 1 +
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 2 +
configs/ls1046ardb_qspi_defconfig | 2 +
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 2 +
configs/ls1046ardb_sdcard_defconfig | 2 +
configs/ls2080ardb_defconfig | 1 +
configs/ls2088ardb_qspi_defconfig | 1 +
drivers/pci/pcie_layerscape.h | 4 +-
drivers/spi/fsl_qspi.c | 8 ++
drivers/usb/common/fsl-errata.c | 4 +
include/configs/ls1021atwr.h | 117 ++++++++++++++-
include/configs/ls1043a_common.h | 79 ++++++++--
include/configs/ls1046a_common.h | 60 +++++++-
include/configs/ls1046aqds.h | 2 +-
include/configs/ls1046ardb.h | 8 +-
include/configs/ls2080aqds.h | 2 +-
include/configs/ls2080ardb.h | 160
+++++++++++----------
38 files changed, 394 insertions(+), 119 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-01 22:56 York Sun
@ 2017-08-01 23:34 ` Bin Meng
2017-08-03 19:07 ` Tom Rini
1 sibling, 0 replies; 147+ messages in thread
From: Bin Meng @ 2017-08-01 23:34 UTC (permalink / raw)
To: u-boot
Hi York,
On Wed, Aug 2, 2017 at 6:56 AM, York Sun <york.sun@nxp.com> wrote:
> Tom,
>
> The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414:
>
> Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
> ec85721c8b94f9eb6807ebb15a223e4ec49a092a
>
> for you to fetch changes up to ec85721c8b94f9eb6807ebb15a223e4ec49a092a:
>
> arm64: ls2088ardb: Add distro secure boot support (2017-08-01
> 08:28:57 -0700)
>
> ----------------------------------------------------------------
> Alexander Stein (1):
> spi: fsl_qspi: Pet watchdog even more
>
> Alison Wang (2):
> arm: ls1021atwr: Add distro boot support
> armv8: Remove duplicate definition for IH_ARCH_ARM and IH_ARCH_ARM64
It looks Alison's DM USB patch is not applied?
http://patchwork.ozlabs.org/patch/785387/
Regards,
Bin
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-08-01 22:56 York Sun
2017-08-01 23:34 ` Bin Meng
@ 2017-08-03 19:07 ` Tom Rini
1 sibling, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-08-03 19:07 UTC (permalink / raw)
To: u-boot
On Tue, Aug 01, 2017 at 10:56:45PM +0000, York Sun wrote:
> Tom,
>
> The following changes since commit f19955a01482d118eac0fdaf530ec6e5b08cf414:
>
> Merge git://git.denx.de/u-boot-uniphier (2017-07-26 11:29:25 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
> ec85721c8b94f9eb6807ebb15a223e4ec49a092a
>
> for you to fetch changes up to ec85721c8b94f9eb6807ebb15a223e4ec49a092a:
>
> arm64: ls2088ardb: Add distro secure boot support (2017-08-01
> 08:28:57 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170803/d4fec417/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-06-02 17:46 york sun
2017-06-04 17:11 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-06-02 17:46 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 380e86f361e4e2aef83295972863654fde157560:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-05-26 11:19:27 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 8d75d52878514e23e0bd9c30743255570d05409c:
armv8: ls1046ardb: Enable loading PPA during SPL stage for SD boot
(2017-06-01 19:57:24 -0700)
----------------------------------------------------------------
Bogdan Purcareata (2):
drivers: net: fsl-mc: Link MC boot to PHY_RESET_R
drivers: net: fsl-mc: Include MAC addr fixup to DPL
Santan Kumar (2):
armv8: ls2080a: Reorganise NAND_BOOT code in config flag
armv8: ls2080aqds: Add support for SD boot
York Sun (5):
armv8: layerscape: Make U-Boot EL2 safe
armv8: layerscape: Enabling loading PPA during SPL stage
armv8: ls1043ardb: Enable loading PPA during SPL stage for SD boot
armv8: ls1046a: Enable spl_board_init() function
armv8: ls1046ardb: Enable loading PPA during SPL stage for SD boot
Zhao Qiang (1):
QE: add QE support on SD boot
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 13 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 17 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 6 +-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 16 +-
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 7 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 16 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 41 ++-
arch/arm/cpu/armv8/sec_firmware.c | 2 +-
arch/arm/cpu/armv8/start.S | 3 +
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
board/freescale/common/ns_access.c | 5 +-
board/freescale/ls2080a/ls2080a.c | 12 +-
board/freescale/ls2080aqds/MAINTAINERS | 1 +
board/freescale/ls2080aqds/README | 13 +
board/freescale/ls2080aqds/eth.c | 18 +-
board/freescale/ls2080aqds/ls2080aqds.c | 4 +-
board/freescale/ls2080ardb/eth_ls2080rdb.c | 15 +-
configs/ls1043ardb_sdcard_defconfig | 1 +
configs/ls1046aqds_nand_defconfig | 1 +
configs/ls1046aqds_sdcard_ifc_defconfig | 1 +
configs/ls1046aqds_sdcard_qspi_defconfig | 1 +
configs/ls1046ardb_emmc_defconfig | 1 +
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_sdcard_defconfig | 2 +
configs/ls2080aqds_nand_defconfig | 1 +
configs/ls2080aqds_sdcard_defconfig | 56 +++++
configs/ls2080ardb_nand_defconfig | 1 +
drivers/net/fsl-mc/mc.c | 274
++++++++++++++++-----
drivers/qe/qe.c | 36 ++-
include/configs/ls1021aqds.h | 1 +
include/configs/ls1021atwr.h | 1 +
include/configs/ls1043a_common.h | 2 +
include/configs/ls1043ardb.h | 4 +-
include/configs/ls2080a_common.h | 14 ++
include/configs/ls2080aqds.h | 29 ++-
include/fsl-mc/fsl_mc.h | 1 +
36 files changed, 515 insertions(+), 103 deletions(-)
create mode 100644 configs/ls2080aqds_sdcard_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-06-02 17:46 york sun
@ 2017-06-04 17:11 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-06-04 17:11 UTC (permalink / raw)
To: u-boot
On Fri, Jun 02, 2017 at 05:46:33PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 380e86f361e4e2aef83295972863654fde157560:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2017-05-26 11:19:27 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 8d75d52878514e23e0bd9c30743255570d05409c:
>
> armv8: ls1046ardb: Enable loading PPA during SPL stage for SD boot
> (2017-06-01 19:57:24 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170604/11e990f2/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-04-25 15:44 York Sun
2017-04-26 19:16 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-04-25 15:44 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to fedebf0d08a7aa152f8f27de1d40eb036557c11b:
armv8: layerscape: Fix DDR size calcuation for SPL build (2017-04-24
09:07:12 -0700)
----------------------------------------------------------------
Alison Wang (1):
arm: ls1021atwr: Enable RGMII TX/RX clock internal delay for AR8033
Hou Zhiqiang (3):
armv8: ls1043aqds: Integrate FSL PPA
armv8: ls1043aqds: enable FSL PPA
armv8: ls1046aqds: Integrate FSL PPA
Santan Kumar (1):
armv8: ls2080ardb: Add phy number for serdes1 protocol 0x4b
Sumit Garg (3):
armv8: fsl-layerscape: Support loading PPA header from eMMC/SD
and NAND Flash
armv8: fsl-layerscape: Add validation of PPA image from NAND and SD
armv8: ls104xardb: Secure Boot: enable PPA support for eMMC/SD
and NAND boot
York Sun (1):
armv8: layerscape: Fix DDR size calcuation for SPL build
Yuantian Tang (1):
arm: psci: make psci usable on single core socs
arch/arm/cpu/armv8/cpu-dt.c | 13 ++---
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 10 ++++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 35 ++++++------
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 72
++++++++++++++++++++++++-
arch/arm/cpu/armv8/sec_firmware.c | 2 +-
arch/arm/include/asm/arch-fsl-layerscape/mp.h | 4 ++
arch/arm/include/asm/armv8/sec_firmware.h | 7 +++
board/freescale/ls1021atwr/ls1021atwr.c | 1 +
board/freescale/ls1043aqds/ddr.c | 4 +-
board/freescale/ls1043aqds/ls1043aqds.c | 5 ++
board/freescale/ls1046aqds/ddr.c | 4 +-
board/freescale/ls1046aqds/ls1046aqds.c | 5 ++
board/freescale/ls1046ardb/ddr.c | 4 +-
board/freescale/ls2080ardb/eth_ls2080rdb.c | 7 +++
configs/ls1043aqds_defconfig | 1 +
configs/ls1043aqds_lpuart_defconfig | 1 +
configs/ls1043aqds_nand_defconfig | 1 +
configs/ls1043aqds_nor_ddr3_defconfig | 1 +
configs/ls1043aqds_qspi_defconfig | 1 +
configs/ls1043aqds_sdcard_ifc_defconfig | 1 +
configs/ls1043aqds_sdcard_qspi_defconfig | 1 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 1 +
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 1 +
24 files changed, 148 insertions(+), 35 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-04-25 15:44 York Sun
@ 2017-04-26 19:16 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-04-26 19:16 UTC (permalink / raw)
To: u-boot
On Tue, Apr 25, 2017 at 08:44:10AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 3c476d841daa491f87c8f07851038afbdf4d90a8:
>
> Merge git://git.denx.de/u-boot-fsl-qoriq (2017-04-18 11:36:06 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to fedebf0d08a7aa152f8f27de1d40eb036557c11b:
>
> armv8: layerscape: Fix DDR size calcuation for SPL build
> (2017-04-24 09:07:12 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170426/d88699a9/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-04-18 15:32 York Sun
2017-04-19 13:02 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2017-04-18 15:32 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 3fea95369850987de15a2a0ac009d05e13b90246:
Merge branch 'master' of git://git.denx.de/u-boot-video (2017-04-14
22:05:17 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to e0dfec863e2ca5088dd797a5b6853d4c0df9002c:
powerpc/board/t1024rdb: enable board-level reset when issuing reset
command (2017-04-17 09:03:30 -0700)
----------------------------------------------------------------
Ashish kumar (1):
armv8: fsl-lsch3: Instantiate TZASC configuration in 2 groups
Ruchika Gupta (4):
arm: ls1043ardb: Add SD secure boot target
arm: ls1043ardb: Add NAND secure boot target
arm: ls1046ardb: Add SD secure boot target
powerpc: e6500: Lock/unlock 1 cache instead of L1 as init_ram
Santan Kumar (1):
armv8: ls2080a: Add serdes2 protocol 0x51 support
Shengzhou Liu (2):
arm64/ls1046a: Enable ERRATUM_A008850 for ls1046a SoC
powerpc/board/t1024rdb: enable board-level reset when issuing
reset command
Sumit Garg (3):
armv8: ls1043ardb: SPL size reduction
armv8: ls1046ardb: SPL size reduction
armv8: LS1046AQDS: Add NOR Secure Boot Target
Thomas Schaefer (1):
drivers: ddr: fsl: fix unused-const-variable warnings
VINITHA PILLAI (1):
powerpc: T1042RDB: SECURE BOOT: Remove CONFIG_CMD_BLOB from SPL
compilation
Vinitha Pillai-B57223 (6):
armv8: fsl-layerscape: SECURE BOOT: Add header address of PPA in
kconfig
armv8: LS1043ARDB: Enable PPA in Secure boot defconfig
armv8: SECURE_BOOT: Enable chain of trust on LS1046A platform
armv8: LS1046ARDB: Add QSPI Secure Boot target
armv8: SECURE_BOOT: Enable chain of trust on LS1012A platform
armv8: LS1012ARDB: Add QSPI Secure Boot target
Yangbo Lu (1):
armv8/fsl-layerscape: fdt: avoid incorrect fixing with
CONFIG_SYS_CLK_FREQ
York Sun (3):
armv8: ls2080a: Drop macro CONFIG_LS2080A
armv8: ls1043a: Drop macro CONFIG_LS1043A
armv7: ls1021a: Drop macro CONFIG_LS102XA
tang yuantian (1):
armv8: ls1046aqds: enable ppa in default config
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 23 +++++++
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 6 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 26 ++++----
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 1 +
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 20 +++++-
arch/arm/dts/Makefile | 2 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 13 ++--
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 2 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
arch/arm/include/asm/arch-ls102xa/config.h | 2 +-
arch/arm/include/asm/config.h | 2 +-
arch/arm/include/asm/fsl_secure_boot.h | 53 ++++++++++------
arch/powerpc/cpu/mpc85xx/start.S | 6 +-
arch/powerpc/include/asm/fsl_secure_boot.h | 2 +-
board/freescale/common/arm_sleep.c | 6 +-
board/freescale/common/fsl_chain_of_trust.c | 2 +-
board/freescale/common/fsl_validate.c | 6 +-
board/freescale/ls1012ardb/MAINTAINERS | 4 ++
board/freescale/ls1012ardb/ls1012ardb.c | 5 ++
board/freescale/ls1043aqds/Makefile | 2 +
board/freescale/ls1043ardb/MAINTAINERS | 2 +
board/freescale/ls1043ardb/Makefile | 4 +-
board/freescale/ls1043ardb/ls1043ardb.c | 18 +++---
board/freescale/ls1046aqds/MAINTAINERS | 4 ++
board/freescale/ls1046aqds/Makefile | 2 +
board/freescale/ls1046aqds/ls1046aqds.c | 19 ++++++
board/freescale/ls1046ardb/Kconfig | 2 +-
board/freescale/ls1046ardb/MAINTAINERS | 10 +++
board/freescale/ls1046ardb/Makefile | 4 +-
board/freescale/ls1046ardb/ls1046ardb.c | 35 ++++++++---
board/freescale/t102xrdb/t102xrdb.c | 7 +++
configs/ls1012ardb_qspi_SECURE_BOOT_defconfig | 48 +++++++++++++++
configs/ls1043ardb_SECURE_BOOT_defconfig | 1 +
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 57 +++++++++++++++++
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 57 +++++++++++++++++
configs/ls1043ardb_sdcard_defconfig | 1 -
configs/ls1046aqds_SECURE_BOOT_defconfig | 39 ++++++++++++
configs/ls1046aqds_defconfig | 1 +
configs/ls1046aqds_lpuart_defconfig | 1 +
configs/ls1046aqds_nand_defconfig | 1 +
configs/ls1046aqds_qspi_defconfig | 1 +
configs/ls1046aqds_sdcard_ifc_defconfig | 1 +
configs/ls1046aqds_sdcard_qspi_defconfig | 1 +
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 37 +++++++++++
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 45 ++++++++++++++
configs/ls2080a_emu_defconfig | 2 +-
configs/ls2080a_simu_defconfig | 2 +-
configs/ls2080aqds_SECURE_BOOT_defconfig | 1 -
configs/ls2080aqds_defconfig | 1 -
configs/ls2080aqds_nand_defconfig | 2 +-
configs/ls2080aqds_qspi_defconfig | 2 +-
configs/ls2080ardb_SECURE_BOOT_defconfig | 1 -
configs/ls2080ardb_defconfig | 1 -
configs/ls2080ardb_nand_defconfig | 2 +-
drivers/crypto/fsl/jobdesc.c | 4 +-
drivers/crypto/fsl/jr.c | 21 ++++---
drivers/ddr/fsl/options.c | 72
+++++++++++-----------
drivers/i2c/mxc_i2c.c | 2 +-
drivers/net/fm/Makefile | 2 +-
drivers/net/ldpaa_eth/Makefile | 2 +-
drivers/qe/qe.c | 6 +-
drivers/usb/common/fsl-errata.c | 2 +-
include/config_fsl_chain_trust.h | 9 +--
include/configs/ls1012a_common.h | 2 -
include/configs/ls1012ardb.h | 3 +
include/configs/ls1021aiot.h | 2 -
include/configs/ls1021aqds.h | 2 -
include/configs/ls1021atwr.h | 2 -
include/configs/ls1043a_common.h | 72
++++++++++++++++++++--
include/configs/ls1043ardb.h | 16 ++++-
include/configs/ls1046a_common.h | 48 ++++++++++++++-
include/configs/ls1046ardb.h | 17 ++++-
include/fsl_errata.h | 4 +-
include/linux/immap_qe.h | 2 +-
include/linux/usb/xhci-fsl.h | 6 +-
include/tsec.h | 2 +-
include/usb/ehci-ci.h | 2 +-
scripts/config_whitelist.txt | 3 -
82 files changed, 740 insertions(+), 172 deletions(-)
create mode 100644 configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
create mode 100644 configs/ls1043ardb_nand_SECURE_BOOT_defconfig
create mode 100644 configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
create mode 100644 configs/ls1046aqds_SECURE_BOOT_defconfig
create mode 100644 configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
create mode 100644 configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-04-18 15:32 York Sun
@ 2017-04-19 13:02 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-04-19 13:02 UTC (permalink / raw)
To: u-boot
On Tue, Apr 18, 2017 at 08:32:48AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 3fea95369850987de15a2a0ac009d05e13b90246:
>
> Merge branch 'master' of git://git.denx.de/u-boot-video
> (2017-04-14 22:05:17 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to e0dfec863e2ca5088dd797a5b6853d4c0df9002c:
>
> powerpc/board/t1024rdb: enable board-level reset when issuing
> reset command (2017-04-17 09:03:30 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170419/8da2eff8/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-03-28 18:02 york sun
2017-04-04 19:59 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-03-28 18:02 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 5cf618ee60a752d058a767372ca1ecb8d9c09b16:
Merge git://git.denx.de/u-boot-arc (2017-03-24 08:19:30 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 78be6222b01efa12d9267876ad1d1d0daf38dfa0:
pcie-layerscape: Fixup iommu-map property of pci node (2017-03-28
10:54:09 -0700)
----------------------------------------------------------------
Ashish kumar (1):
armv8: fsl-lsch3: Conditionally apply workaround for erratum a0009203
Bharat Bhushan (7):
armv8: fsl-lsch3: rename ls2080a_stream_id.h to stream_id_lsch3.h
armv8: fsl-lsch3: Rewrite comment for stream IDs
arvm8: pcie-layerscape: Define stream-ids for Layerscape Chassis-2
armv8: fsl-lsch2: Use Chassis-2 streamid definition for ls1046a
armv8: fsl-lsch2: Use Chassis-2 streamid definition for ls1012a
pcie-layerscape: Initialize pci-lut for NXP chasis-2 socs
pcie-layerscape: Fixup iommu-map property of pci node
Hou Zhiqiang (9):
fsl-layerscape/ppa: cleanup ppa.h
pci: layerscape: enable PCIe config ready
pci: layerscape: add LS2088A series SoC pcie support
pci: layerscape: Fixup device tree node for ls2088a
mtd: nand: add initialization flag
mtd: nand: remove nand size print from nand_init function
fsl: PPA: add support PPA image loading from NAND and SD
armv8: Kconfig: fsl-ppa: support load PPA from eMMC/SD and NAND Flash
fsl-layerscape/ls104xardb: enable PPA support for eMMC/SD and
NAND boot
Prabhakar Kushwaha (2):
arm: fsl-layerscape: Move QSGMII wriop_init to SoC file
armv8:fsl-layerscape: Avoid RCWSR28 register hard-coding
Priyanka Jain (1):
armv8/fsl-layerscape: Update erratum A009635 implementation
Santan Kumar (2):
armv8: ls2080ardb, ls2080aqds: Add mcmemsize in default env setting
board: freescale: ls2080a/ls2088a: Enable PPA
Suresh Gupta (2):
spi: fsl_qspi: Add support for single chip select
armv8: dts: fsl-ls1012a: Change number of CS in SPI node
Udit Agarwal (3):
armv8: lsch3: SECURE_BOOT: Define CONFIG_SYS_LS_PPA_ESBC_ADDR for
LS2080A
armv8: LS2080A: Move sec_init to board_init
fsl: Secure Boot: Enable IE (Key extention) Feature
Wenbin Song (1):
armv8: ls1043a/ls1046aqds: fix the offsets of MTD partitions on
NOR flash
Yingxi Yu (1):
armv8/fsl-layerscape: fdt: Skip checking USB clock on LS1012A
yuan linyu (1):
tools: plbimage support generate rcw file
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 20 +++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 55 +++++++-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 3 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 53 ++++----
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 143
++++++++++++++++++++-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 4 +
arch/arm/dts/fsl-ls1012a.dtsi | 2 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 8 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 ++
arch/arm/include/asm/arch-fsl-layerscape/ppa.h | 7 +-
.../asm/arch-fsl-layerscape/stream_id_lsch2.h | 63 +++++++++
.../{ls2080a_stream_id.h => stream_id_lsch3.h} | 15 ++-
arch/arm/include/asm/armv8/sec_firmware.h | 4 -
arch/arm/include/asm/fsl_secure_boot.h | 8 +-
board/freescale/common/fsl_validate.c | 88 ++++++++++---
board/freescale/ls1043ardb/ls1043ardb.c | 2 -
board/freescale/ls2080aqds/ls2080aqds.c | 13 +-
board/freescale/ls2080ardb/ls2080ardb.c | 11 +-
common/board_r.c | 1 +
configs/ls1043ardb_nand_defconfig | 1 +
configs/ls1043ardb_sdcard_defconfig | 1 +
configs/ls1046ardb_emmc_defconfig | 1 +
configs/ls1046ardb_sdcard_defconfig | 1 +
configs/ls2080aqds_defconfig | 1 +
configs/ls2080ardb_defconfig | 1 +
drivers/mtd/nand/nand.c | 17 ++-
drivers/net/ldpaa_eth/ls2080a.c | 30 +++++
drivers/pci/pcie_layerscape.c | 42 ++++++
drivers/pci/pcie_layerscape.h | 10 ++
drivers/pci/pcie_layerscape_fixup.c | 94 ++++++++++++--
drivers/spi/fsl_qspi.c | 5 +-
include/configs/ls1012a_common.h | 1 +
include/configs/ls1043a_common.h | 15 ++-
include/configs/ls1046a_common.h | 1 +
include/configs/ls1046aqds.h | 14 +-
include/configs/ls2080a_common.h | 2 +-
include/configs/ls2080aqds.h | 2 +
include/configs/ls2080ardb.h | 2 +
include/fsl-mc/ldpaa_wriop.h | 1 +
include/fsl_validate.h | 24 +++-
include/nand.h | 1 +
tools/pblimage.c | 48 ++++---
42 files changed, 691 insertions(+), 133 deletions(-)
create mode 100644
arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch2.h
rename arch/arm/include/asm/arch-fsl-layerscape/{ls2080a_stream_id.h
=> stream_id_lsch3.h} (80%)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-03-28 18:02 york sun
@ 2017-04-04 19:59 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-04-04 19:59 UTC (permalink / raw)
To: u-boot
On Tue, Mar 28, 2017 at 06:02:35PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 5cf618ee60a752d058a767372ca1ecb8d9c09b16:
>
> Merge git://git.denx.de/u-boot-arc (2017-03-24 08:19:30 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 78be6222b01efa12d9267876ad1d1d0daf38dfa0:
>
> pcie-layerscape: Fixup iommu-map property of pci node (2017-03-28
> 10:54:09 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170404/628568ed/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-03-14 19:31 york sun
0 siblings, 0 replies; 147+ messages in thread
From: york sun @ 2017-03-14 19:31 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 8537ddd769f460d7fb7a62a3dcc9669049702e51:
Prepare v2017.03 (2017-03-13 13:54:16 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 9b6639fa85bddd90df4c371f25a89c791a6ee6ef:
LS1021ATWR: Modify u-boot size for sd secure boot (2017-03-14
08:44:03 -0700)
----------------------------------------------------------------
Hou Zhiqiang (1):
armv8/ls104xa: remove the DDR interactive debugging info from SPL
Priyanka Jain (3):
armv8: fsl-layerscape: Updates DCFG register map
armv8: fsl-lsch3: Update VID support
armv8: fsl-layerscape: Add vid support for LS2080AQDS
Tang Yuantian (1):
armv8: fsl-lsch2: add workaround for erratum A-010635
Vinitha Pillai (1):
LS1021ATWR: Modify u-boot size for sd secure boot
York Sun (11):
armv8: Add global variable resv_ram
armv8: ls2080a: Move CONFIG_FSL_MC_ENET to Kconfig
armv8: ls2080a: Move CONFIG_SYS_MC_RSV_MEM_ALIGN to Kconfig
efi: Add a hook to allow adding memory mapping
armv8: layerscape: Rewrite memory reservation
driver: net: fsl-mc: Update calculation of MC RAM
armv8: layerscape: Update MMU mapping with actual DDR size
armv8: layerscape: Fix the sequence of changing MMU table
armv8: ls2080a: Drop early MMU for SPL build
armv8: mmu: Add a function to change mapping attributes
armv8: layerscape: Update early MMU for DDR after initialization
arch/arm/cpu/armv8/cache_v8.c | 72 ++++-
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 26 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 331
+++++++++++++++++++--
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 -
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 3 -
arch/arm/include/asm/arch-fsl-layerscape/config.h | 4 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 12 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 69 +++--
arch/arm/include/asm/arch-fsl-layerscape/mmu.h | 2 +-
arch/arm/include/asm/armv8/mmu.h | 5 +
arch/arm/include/asm/fsl_secure_boot.h | 4 +-
arch/arm/include/asm/global_data.h | 7 +
arch/arm/include/asm/system.h | 1 +
board/freescale/common/vid.c | 174 ++++++++++-
board/freescale/ls1012afrdm/ls1012afrdm.c | 34 +--
board/freescale/ls1012aqds/ls1012aqds.c | 34 +--
board/freescale/ls1012ardb/ls1012ardb.c | 34 +--
board/freescale/ls1043aqds/ddr.c | 29 --
board/freescale/ls1043aqds/ls1043aqds.c | 5 +
board/freescale/ls1043ardb/ddr.c | 29 --
board/freescale/ls1043ardb/ls1043ardb.c | 7 -
board/freescale/ls1046aqds/ddr.c | 29 --
board/freescale/ls1046aqds/ls1046aqds.c | 5 +
board/freescale/ls1046ardb/ddr.c | 29 --
board/freescale/ls1046ardb/ls1046ardb.c | 7 -
board/freescale/ls2080a/ddr.c | 55 ----
board/freescale/ls2080a/ls2080a.c | 17 +-
board/freescale/ls2080aqds/ddr.c | 55 ----
board/freescale/ls2080aqds/ls2080aqds.c | 26 +-
board/freescale/ls2080ardb/ddr.c | 55 ----
board/freescale/ls2080ardb/ls2080ardb.c | 26 +-
cmd/bdinfo.c | 4 +
common/board_f.c | 32 +-
drivers/net/fsl-mc/mc.c | 75 +----
include/configs/ls1021atwr.h | 4 +-
include/configs/ls1043aqds.h | 2 +
include/configs/ls1043ardb.h | 2 +
include/configs/ls1046aqds.h | 2 +
include/configs/ls1046ardb.h | 2 +
include/configs/ls2080a_common.h | 2 -
lib/efi_loader/efi_memory.c | 14 +-
scripts/config_whitelist.txt | 2 -
42 files changed, 750 insertions(+), 579 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-03-09 21:33 york sun
2017-03-10 15:23 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-03-09 21:33 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 0574f786d3c85ab1a9fe9ee8ade65e3ae83e18a4:
Merge branch 'master' of git://git.denx.de/u-boot-video (2017-03-08
07:14:21 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to bbf04d4e8094074855d6d0e4f3f1882110f85b15:
LS1021ATWR: Modify u-boot size for sd secure boot (2017-03-09
09:01:39 -0800)
----------------------------------------------------------------
Hou Zhiqiang (1):
armv8/ls104xa: remove the DDR interactive debugging info from SPL
Priyanka Jain (3):
armv8: fsl-layerscape: Updates DCFG register map
armv8: fsl-lsch3: Update VID support
armv8: fsl-layerscape: Add vid support for LS2080AQDS
Tang Yuantian (1):
armv8: fsl-lsch2: add workaround for erratum A-010635
Vinitha Pillai (1):
LS1021ATWR: Modify u-boot size for sd secure boot
York Sun (11):
armv8: Add global variable resv_ram
armv8: ls2080a: Move CONFIG_FSL_MC_ENET to Kconfig
armv8: ls2080a: Move CONFIG_SYS_MC_RSV_MEM_ALIGN to Kconfig
efi: Add a hook to allow adding memory mapping
armv8: layerscape: Rewrite memory reservation
driver: net: fsl-mc: Update calculation of MC RAM
armv8: layerscape: Update MMU mapping with actual DDR size
armv8: layerscape: Fix the sequence of changing MMU table
armv8: ls2080a: Drop early MMU for SPL build
armv8: mmu: Add a function to change mapping attributes
armv8: layerscape: Update early MMU for DDR after initialization
arch/arm/cpu/armv8/cache_v8.c | 72 ++++-
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 26 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 331
+++++++++++++++++++--
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 -
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 3 -
arch/arm/include/asm/arch-fsl-layerscape/config.h | 4 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 12 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 69 +++--
arch/arm/include/asm/arch-fsl-layerscape/mmu.h | 2 +-
arch/arm/include/asm/armv8/mmu.h | 5 +
arch/arm/include/asm/fsl_secure_boot.h | 4 +-
arch/arm/include/asm/global_data.h | 7 +
arch/arm/include/asm/system.h | 1 +
board/freescale/common/vid.c | 174 ++++++++++-
board/freescale/ls1012afrdm/ls1012afrdm.c | 34 +--
board/freescale/ls1012aqds/ls1012aqds.c | 34 +--
board/freescale/ls1012ardb/ls1012ardb.c | 34 +--
board/freescale/ls1043aqds/ddr.c | 29 --
board/freescale/ls1043aqds/ls1043aqds.c | 5 +
board/freescale/ls1043ardb/ddr.c | 29 --
board/freescale/ls1043ardb/ls1043ardb.c | 7 -
board/freescale/ls1046aqds/ddr.c | 29 --
board/freescale/ls1046aqds/ls1046aqds.c | 5 +
board/freescale/ls1046ardb/ddr.c | 29 --
board/freescale/ls1046ardb/ls1046ardb.c | 7 -
board/freescale/ls2080a/ddr.c | 55 ----
board/freescale/ls2080a/ls2080a.c | 17 +-
board/freescale/ls2080aqds/ddr.c | 55 ----
board/freescale/ls2080aqds/ls2080aqds.c | 26 +-
board/freescale/ls2080ardb/ddr.c | 55 ----
board/freescale/ls2080ardb/ls2080ardb.c | 26 +-
cmd/bdinfo.c | 4 +
common/board_f.c | 32 +-
drivers/net/fsl-mc/mc.c | 75 +----
include/configs/ls1021atwr.h | 4 +-
include/configs/ls1043aqds.h | 2 +
include/configs/ls1043ardb.h | 2 +
include/configs/ls1046aqds.h | 2 +
include/configs/ls1046ardb.h | 2 +
include/configs/ls2080a_common.h | 2 -
lib/efi_loader/efi_memory.c | 14 +-
scripts/config_whitelist.txt | 2 -
42 files changed, 750 insertions(+), 579 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-03-09 21:33 york sun
@ 2017-03-10 15:23 ` Tom Rini
2017-03-10 16:46 ` york sun
0 siblings, 1 reply; 147+ messages in thread
From: Tom Rini @ 2017-03-10 15:23 UTC (permalink / raw)
To: u-boot
On Thu, Mar 09, 2017 at 09:33:51PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 0574f786d3c85ab1a9fe9ee8ade65e3ae83e18a4:
>
> Merge branch 'master' of git://git.denx.de/u-boot-video (2017-03-08
> 07:14:21 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to bbf04d4e8094074855d6d0e4f3f1882110f85b15:
>
> LS1021ATWR: Modify u-boot size for sd secure boot (2017-03-09
> 09:01:39 -0800)
>
> ----------------------------------------------------------------
> Hou Zhiqiang (1):
> armv8/ls104xa: remove the DDR interactive debugging info from SPL
>
> Priyanka Jain (3):
> armv8: fsl-layerscape: Updates DCFG register map
> armv8: fsl-lsch3: Update VID support
> armv8: fsl-layerscape: Add vid support for LS2080AQDS
>
> Tang Yuantian (1):
> armv8: fsl-lsch2: add workaround for erratum A-010635
>
> Vinitha Pillai (1):
> LS1021ATWR: Modify u-boot size for sd secure boot
>
> York Sun (11):
> armv8: Add global variable resv_ram
> armv8: ls2080a: Move CONFIG_FSL_MC_ENET to Kconfig
> armv8: ls2080a: Move CONFIG_SYS_MC_RSV_MEM_ALIGN to Kconfig
> efi: Add a hook to allow adding memory mapping
> armv8: layerscape: Rewrite memory reservation
> driver: net: fsl-mc: Update calculation of MC RAM
> armv8: layerscape: Update MMU mapping with actual DDR size
> armv8: layerscape: Fix the sequence of changing MMU table
> armv8: ls2080a: Drop early MMU for SPL build
> armv8: mmu: Add a function to change mapping attributes
> armv8: layerscape: Update early MMU for DDR after initialization
The release is Monday so I'm not really comfortable pulling in the
"rewrite memory reservation" series at this point in the cycle. Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170310/41d5b79e/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-03-10 15:23 ` Tom Rini
@ 2017-03-10 16:46 ` york sun
2017-03-10 21:07 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-03-10 16:46 UTC (permalink / raw)
To: u-boot
On 03/10/2017 07:23 AM, Tom Rini wrote:
>
> The release is Monday so I'm not really comfortable pulling in the
> "rewrite memory reservation" series at this point in the cycle. Thanks!
>
No problem. You can pull it after the release.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-03-10 16:46 ` york sun
@ 2017-03-10 21:07 ` Tom Rini
2017-03-10 21:21 ` york sun
0 siblings, 1 reply; 147+ messages in thread
From: Tom Rini @ 2017-03-10 21:07 UTC (permalink / raw)
To: u-boot
On Fri, Mar 10, 2017 at 04:46:58PM +0000, york sun wrote:
> On 03/10/2017 07:23 AM, Tom Rini wrote:
> >
> > The release is Monday so I'm not really comfortable pulling in the
> > "rewrite memory reservation" series at this point in the cycle. Thanks!
> >
>
> No problem. You can pull it after the release.
Can you please re-submit it, after release and include the gcc-6 warning
fixes? Thanks again!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170310/f8994bc0/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-03-10 21:07 ` Tom Rini
@ 2017-03-10 21:21 ` york sun
2017-03-10 21:42 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-03-10 21:21 UTC (permalink / raw)
To: u-boot
On 03/10/2017 01:07 PM, Tom Rini wrote:
> On Fri, Mar 10, 2017 at 04:46:58PM +0000, york sun wrote:
>> On 03/10/2017 07:23 AM, Tom Rini wrote:
>>>
>>> The release is Monday so I'm not really comfortable pulling in the
>>> "rewrite memory reservation" series at this point in the cycle. Thanks!
>>>
>>
>> No problem. You can pull it after the release.
>
> Can you please re-submit it, after release and include the gcc-6 warning
> fixes? Thanks again!
>
Yes I can. Does it mean I have to rebase to the release head and force
update my branch?
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-03-10 21:21 ` york sun
@ 2017-03-10 21:42 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-03-10 21:42 UTC (permalink / raw)
To: u-boot
On Fri, Mar 10, 2017 at 09:21:03PM +0000, york sun wrote:
> On 03/10/2017 01:07 PM, Tom Rini wrote:
> > On Fri, Mar 10, 2017 at 04:46:58PM +0000, york sun wrote:
> >> On 03/10/2017 07:23 AM, Tom Rini wrote:
> >>>
> >>> The release is Monday so I'm not really comfortable pulling in the
> >>> "rewrite memory reservation" series at this point in the cycle. Thanks!
> >>>
> >>
> >> No problem. You can pull it after the release.
> >
> > Can you please re-submit it, after release and include the gcc-6 warning
> > fixes? Thanks again!
> >
>
> Yes I can. Does it mean I have to rebase to the release head and force
> update my branch?
I don't want merge commits in your PR. You probably won't conflict with
the few things I've already pushed however. Your choice.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170310/9e8fb245/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-02-03 22:35 york sun
2017-02-05 16:25 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-02-03 22:35 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit cf4128e53caa4f7b0a6586fc3f10690d5c05db31:
Merge git://www.denx.de/git/u-boot-marvell (2017-01-26 12:26:24 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to add63f94a9c3bbe1af3fdf3f4c56a5185a4c0504:
arch: powerpc: update the eLBC IP input clock (2017-02-03 14:31:45 -0800)
----------------------------------------------------------------
Bogdan Purcareata (1):
drivers: net: fsl-mc: Fixup MAC addresses in DPC
Prabhakar Kushwaha (7):
board: freescale: ls1012a: Enable secure DDR on LS1012A platforms
armv8: ls1012a: Add support of PPA
arch: powerpc: Move CONFIG_FSL_IFC to Kconfig
arch: powerpc: update the IFC IP input clock
arch: arm: update the IFC IP input clock
arch: powerpc: Move CONFIG_FSL_ELBC to Kconfig
arch: powerpc: update the eLBC IP input clock
Tang Yuantian (3):
armv8: ls1046aqds: added usb feature support
armv8: ls1046a: added usb nodes in dts
armv8: ls1046a: enable usb in defconfig
York Sun (2):
armv7: ls1021aqds: Set cpo_sample for erratum A-009942
armv8: ls1046a: Enable workaround for erratum A-008336
README | 6 ++
arch/arm/cpu/armv7/ls102xa/clock.c | 9 +-
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 1 +
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 10 +-
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 10 +-
arch/arm/dts/fsl-ls1046a.dtsi | 21 +++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 3 +
arch/powerpc/cpu/mpc85xx/Kconfig | 71 ++++++++++++++
arch/powerpc/cpu/mpc85xx/speed.c | 38 +-------
arch/powerpc/cpu/mpc86xx/speed.c | 15 +--
board/freescale/ls1012afrdm/ls1012afrdm.c | 35 +++++++
board/freescale/ls1012aqds/ls1012aqds.c | 36 +++++++
board/freescale/ls1012ardb/ls1012ardb.c | 35 +++++++
board/freescale/ls1021aqds/ddr.c | 3 +
configs/ls1012afrdm_qspi_defconfig | 1 +
configs/ls1012aqds_qspi_defconfig | 1 +
configs/ls1012ardb_qspi_defconfig | 1 +
configs/ls1046aqds_defconfig | 2 +
configs/ls1046aqds_lpuart_defconfig | 2 +
configs/ls1046aqds_nand_defconfig | 2 +
configs/ls1046aqds_qspi_defconfig | 2 +
configs/ls1046aqds_sdcard_ifc_defconfig | 2 +
configs/ls1046aqds_sdcard_qspi_defconfig | 2 +
configs/ls1046ardb_emmc_defconfig | 2 +
configs/ls1046ardb_qspi_defconfig | 2 +
configs/ls1046ardb_sdcard_defconfig | 2 +
drivers/net/fsl-mc/mc.c | 103
++++++++++++++++++++-
include/configs/B4860QDS.h | 1 -
include/configs/BSC9131RDB.h | 1 -
include/configs/BSC9132QDS.h | 1 -
include/configs/C29XPCIE.h | 1 -
include/configs/MPC8536DS.h | 1 -
include/configs/MPC8569MDS.h | 2 -
include/configs/MPC8572DS.h | 1 -
include/configs/P1010RDB.h | 1 -
include/configs/P1022DS.h | 1 -
include/configs/P1023RDB.h | 1 -
include/configs/P2041RDB.h | 1 -
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/T104xRDB.h | 1 -
include/configs/T208xQDS.h | 1 -
include/configs/T208xRDB.h | 1 -
include/configs/T4240RDB.h | 1 -
include/configs/UCP1020.h | 1 -
include/configs/controlcenterd.h | 1 -
include/configs/corenet_ds.h | 1 -
include/configs/cyrus.h | 1 -
include/configs/km/kmp204x-common.h | 1 -
include/configs/ls1012a_common.h | 1 +
include/configs/ls1046aqds.h | 12 +++
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/p1_twr.h | 1 -
include/configs/t4qds.h | 1 -
include/configs/xpedite537x.h | 1 -
include/configs/xpedite550x.h | 1 -
57 files changed, 356 insertions(+), 103 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-02-03 22:35 york sun
@ 2017-02-05 16:25 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-02-05 16:25 UTC (permalink / raw)
To: u-boot
On Fri, Feb 03, 2017 at 10:35:31PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit cf4128e53caa4f7b0a6586fc3f10690d5c05db31:
>
> Merge git://www.denx.de/git/u-boot-marvell (2017-01-26 12:26:24 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to add63f94a9c3bbe1af3fdf3f4c56a5185a4c0504:
>
> arch: powerpc: update the eLBC IP input clock (2017-02-03 14:31:45 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170205/e6259833/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2017-01-19 17:20 york sun
2017-01-20 13:50 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2017-01-19 17:20 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit a705ebc81b7f91bbd0ef7c634284208342901149:
Prepare v2017.01 (2017-01-09 11:57:05 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 5e4a6db8f428cb1f8ced74bc77241144ac0c5b1a:
armv8: ls1012a: define esdhc_status_fixup for RDB board (2017-01-18
09:46:52 -0800)
----------------------------------------------------------------
Alison Wang (1):
armv8: aarch64: Fix the warning about x1-x3 nonzero issue
Hou Zhiqiang (17):
configs: ls1021a: enable DT and DM support
pci: layerscape: move kernel DT fixup to a separate file
kconfig: move FSL_PCIE_COMPAT to platform Kconfig
ARMv8/fsl-layerscape: Correct the OCRAM size
armv8/fsl_lsch2: Add the OCRAM initialization
ARMv8/fsl-layerscape: Enable data coherency between cores in cluster
armv8/fsl-lsch2: refactor the clock system initialization
armv8/fsl-lsch3: consolidate the clock system initialization
pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
pmic: pmic_mc34vr500: Add APIs to set/get SWx volt
ls1046ardb: cpld: add API for selecting core volt
armv8/fsl_lsch2: Add chip power supply voltage setup
ls1046ardb: Add support power initialization
kconfig: armv8: move armv8 sec_firmware CONFIG_* to Kconfig
ARMv8/sec_firmware: relocated and renamed the config
FSL_PPA_ARMV8_PSCI
kconfig: fsl PPA: move CONFIG_* to Kconfig
fsl PPA: enable PPA for ls1043ardb and ls1046ardb
Minghuan Lian (15):
armv8/layerscape: remove unnecessary function declares
dm: pci: return the real controller in pci_bus_to_hose()
dm: pci: remove pci_bus_to_hose(0) calling
arm: ls1021a: add PCIe dts node
arm: ls1012a: add PCIe dts node
armv8: ls1043a: add PCIe dts node
armv8: ls1046a: add PCIe dts node
armv8: ls2080a: add PCIe dts node
pci: layerscape: add pci driver based on DM
arm: ls1021a: Enable PCIe in defconfigs
arm: ls1012a: Enable PCIe and E1000 in defconfigs
armv8: ls1043a: Enable PCIe and E1000 in defconfigs
armv8: ls1046a: Enable PCIe and E1000 in defconfigs
armv8: ls2080a: Enable PCIe in defconfigs
pci: layerscape: remove unnecessary legacy code
Mingkai Hu (1):
armv8: Enable CPUECTLR.SMPEN for coherency
Prabhakar Kushwaha (1):
arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC
Priyanka Jain (1):
armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20
Tang Yuantian (3):
armv8: ls1012: added usb nodes in dts
armv8: ls1012: Enable CONFIG_DM_USB in defconfigs
armv8: fsl-lsch3: enable snoopable sata read and write
Udit Agarwal (2):
SECURE_BOOT: Update bootscript and its hdr addresses
LS2080A: Add validation of MC & DPC images.
Wenbin Song (2):
armv8/ls1043a: fixup GIC offset for ls1043a rev1
armv8/fsl-layerscape: fdt: fixup LS1043A rev1 MSI node
Yangbo Lu (7):
mmc: fsl_esdhc: make GPIO support optional
mmc: fsl_esdhc: add 'fsl, esdhc' into of_match table
armv8: ls1012a: add eSDHC nodes
configs: ls1012a: enable driver model for eSDHC
mmc: fsl_esdhc: move 'status' property fixup into a weak function
armv8: ls1012a: define esdhc_status_fixup for QDS board
armv8: ls1012a: define esdhc_status_fixup for RDB board
York Sun (1):
armv8: fsl-layerscape: Fix SECURE_BOOT config
jerry.huang at nxp.com (1):
fsl/usb: enable usb feature for ls1046ardb
arch/arm/Kconfig | 1 +
arch/arm/cpu/armv7/ls102xa/Kconfig | 8 +
arch/arm/cpu/armv8/Kconfig | 59 ++
arch/arm/cpu/armv8/Makefile | 2 +-
arch/arm/cpu/armv8/cpu-dt.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 132 ++-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 5 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 220 ++++-
.../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 272 ++++++
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 69 +-
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 28 +-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 146 ++-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 91 ++
arch/arm/cpu/armv8/sec_firmware.c | 2 +-
arch/arm/cpu/armv8/sec_firmware_asm.S | 12 +-
arch/arm/cpu/armv8/start.S | 19 +-
arch/arm/cpu/armv8/transition.S | 22 +-
arch/arm/dts/fsl-ls1012a.dtsi | 46 +
arch/arm/dts/fsl-ls1043a.dtsi | 46 +
arch/arm/dts/fsl-ls1046a.dtsi | 49 ++
arch/arm/dts/fsl-ls2080a.dtsi | 60 ++
arch/arm/dts/ls1021a.dtsi | 31 +
arch/arm/include/asm/arch-fsl-layerscape/config.h | 33 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 8 +-
arch/arm/include/asm/arch-fsl-layerscape/fdt.h | 4 -
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 8 +
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 4 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 +
arch/arm/include/asm/armv8/sec_firmware.h | 2 +-
arch/arm/include/asm/fsl_secure_boot.h | 12 +-
arch/arm/include/asm/system.h | 8 +-
arch/arm/lib/bootm-fdt.c | 2 +-
arch/arm/lib/bootm.c | 10 +-
arch/arm/lib/psci-dt.c | 2 +-
arch/arm/mach-rmobile/lowlevel_init_gen3.S | 8 +-
board/freescale/common/Makefile | 1 +
board/freescale/common/mc34vr500.c | 95 ++
board/freescale/ls1012aqds/ls1012aqds.c | 28 +
board/freescale/ls1012ardb/ls1012ardb.c | 38 +
board/freescale/ls1046ardb/cpld.c | 9 +
board/freescale/ls1046ardb/cpld.h | 1 +
board/freescale/ls1046ardb/ls1046ardb.c | 34 +
cmd/bootefi.c | 2 +-
configs/ls1012afrdm_qspi_defconfig | 6 +
configs/ls1012aqds_qspi_defconfig | 9 +-
configs/ls1012ardb_qspi_defconfig | 9 +-
configs/ls1021aiot_qspi_defconfig | 4 +
configs/ls1021aiot_sdcard_defconfig | 4 +
configs/ls1021aqds_ddr4_nor_defconfig | 5 +-
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 5 +-
configs/ls1021aqds_nand_defconfig | 8 +-
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 7 +-
configs/ls1021aqds_nor_defconfig | 5 +-
configs/ls1021aqds_nor_lpuart_defconfig | 5 +-
configs/ls1021aqds_qspi_defconfig | 5 +-
configs/ls1021aqds_sdcard_ifc_defconfig | 5 +-
configs/ls1021aqds_sdcard_qspi_defconfig | 5 +-
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 7 +-
configs/ls1021atwr_nor_defconfig | 5 +-
configs/ls1021atwr_nor_lpuart_defconfig | 5 +-
configs/ls1021atwr_qspi_defconfig | 5 +-
.../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 7 +-
configs/ls1021atwr_sdcard_ifc_defconfig | 8 +-
configs/ls1021atwr_sdcard_qspi_defconfig | 5 +-
configs/ls1043aqds_defconfig | 7 +-
configs/ls1043aqds_lpuart_defconfig | 7 +-
configs/ls1043aqds_nand_defconfig | 7 +-
configs/ls1043aqds_nor_ddr3_defconfig | 7 +-
configs/ls1043aqds_qspi_defconfig | 7 +-
configs/ls1043aqds_sdcard_ifc_defconfig | 7 +-
configs/ls1043aqds_sdcard_qspi_defconfig | 7 +-
configs/ls1043ardb_SECURE_BOOT_defconfig | 8 +-
configs/ls1043ardb_defconfig | 8 +-
configs/ls1043ardb_nand_defconfig | 7 +-
configs/ls1043ardb_sdcard_defconfig | 7 +-
configs/ls1046aqds_defconfig | 6 +
configs/ls1046aqds_nand_defconfig | 6 +
configs/ls1046aqds_qspi_defconfig | 6 +
configs/ls1046aqds_sdcard_ifc_defconfig | 6 +
configs/ls1046aqds_sdcard_qspi_defconfig | 6 +
configs/ls1046ardb_emmc_defconfig | 6 +
configs/ls1046ardb_qspi_defconfig | 7 +
configs/ls1046ardb_sdcard_defconfig | 6 +
configs/ls2080aqds_SECURE_BOOT_defconfig | 6 +-
configs/ls2080aqds_defconfig | 5 +-
configs/ls2080aqds_nand_defconfig | 5 +-
configs/ls2080aqds_qspi_defconfig | 5 +-
configs/ls2080ardb_SECURE_BOOT_defconfig | 6 +-
configs/ls2080ardb_defconfig | 5 +-
configs/ls2080ardb_nand_defconfig | 5 +-
drivers/mmc/fsl_esdhc.c | 32 +-
drivers/pci/Kconfig | 8 +
drivers/pci/Makefile | 1 +
drivers/pci/pci_common.c | 17 +-
drivers/pci/pci_compat.c | 2 +-
drivers/pci/pcie_layerscape.c | 979
++++++++-------------
drivers/pci/pcie_layerscape.h | 140 +++
drivers/pci/pcie_layerscape_fixup.c | 187 ++++
drivers/power/pmic/Kconfig | 7 +
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/pmic_mc34vr500.c | 32 +
include/configs/ls1012a_common.h | 6 +-
include/configs/ls1012afrdm.h | 5 +
include/configs/ls1012aqds.h | 21 +-
include/configs/ls1012ardb.h | 21 +-
include/configs/ls1021aiot.h | 22 +-
include/configs/ls1021aqds.h | 20 +-
include/configs/ls1021atwr.h | 20 +-
include/configs/ls1043a_common.h | 21 +-
include/configs/ls1043aqds.h | 4 +
include/configs/ls1043ardb.h | 14 +-
include/configs/ls1046a_common.h | 3 +-
include/configs/ls1046aqds.h | 4 +
include/configs/ls1046ardb.h | 33 +-
include/configs/ls2080a_common.h | 27 +-
include/configs/ls2080aqds.h | 27 +-
include/configs/ls2080ardb.h | 35 +-
include/fsl_ddr_sdram.h | 1 +
include/linux/usb/xhci-fsl.h | 2 +-
include/power/mc34vr500_pmic.h | 175 ++++
scripts/config_whitelist.txt | 1 -
123 files changed, 2834 insertions(+), 969 deletions(-)
create mode 100644 board/freescale/common/mc34vr500.c
create mode 100644 drivers/pci/pcie_layerscape.h
create mode 100644 drivers/pci/pcie_layerscape_fixup.c
create mode 100644 drivers/power/pmic/pmic_mc34vr500.c
create mode 100644 include/power/mc34vr500_pmic.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2017-01-19 17:20 york sun
@ 2017-01-20 13:50 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2017-01-20 13:50 UTC (permalink / raw)
To: u-boot
On Thu, Jan 19, 2017 at 05:20:09PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit a705ebc81b7f91bbd0ef7c634284208342901149:
>
> Prepare v2017.01 (2017-01-09 11:57:05 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 5e4a6db8f428cb1f8ced74bc77241144ac0c5b1a:
>
> armv8: ls1012a: define esdhc_status_fixup for RDB board (2017-01-18
> 09:46:52 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170120/c6a8462c/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-12-16 17:43 york sun
2016-12-17 3:18 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-12-16 17:43 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 53e8ca22538c2cec691fe74098684a359302688c:
MAINTAINERS: DFU: Change e-mail address for DFU maintainer
(2016-12-12 13:03:15 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to c151cb5b516e609a0846bd392d6207a77b66a7ff:
ARMv8: LS1043A: Enable LS1043A default PSCI support (2016-12-15
11:57:56 -0800)
----------------------------------------------------------------
Hou Zhiqiang (2):
armv8: ls1043ardb: dts: Fix the unit-address of some I2C device nodes
armv8: ls1043a: dts: Fix the ranges table of IFC node
Priyanka Jain (1):
driver: fsl-mc: qbman: Add QBMAN 4.1 support
Shengzhou Liu (2):
fsl/ddr: Enable erratum-a009942 workaround for B/T-series
fsl/board/ddr: optimize board-specific cpo for erratum A-009942
macro.wave.z at gmail.com (6):
ARMv8: LS1043A: change macro CONFIG_ARMV8_PSCI definition
ARMv8: Add secure sections for PSCI text and data
ARMv8: Enable SMC instruction
ARMv8: Add basic PSCI framework
ARMv8: Setup PSCI memory and device tree
ARMv8: LS1043A: Enable LS1043A default PSCI support
arch/arm/config.mk | 3 +-
arch/arm/cpu/armv8/Kconfig | 41 ++++
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/cpu-dt.c | 11 +-
arch/arm/cpu/armv8/cpu.c | 22 ++
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 21 ++
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 3 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 3 +-
arch/arm/cpu/armv8/fsl-layerscape/ls1043a_psci.S | 20 ++
arch/arm/cpu/armv8/psci.S | 286
+++++++++++++++++++++++
arch/arm/cpu/armv8/sec_firmware.c | 2 +-
arch/arm/cpu/armv8/sec_firmware_asm.S | 2 +-
arch/arm/cpu/armv8/u-boot.lds | 57 +++++
arch/arm/dts/fsl-ls1043a-qds.dtsi | 12 +-
arch/arm/dts/fsl-ls1043a-rdb.dts | 8 +-
arch/arm/include/asm/armv8/sec_firmware.h | 2 +-
arch/arm/include/asm/macro.h | 8 +-
arch/arm/include/asm/psci.h | 15 ++
arch/arm/include/asm/secure.h | 2 +-
arch/arm/include/asm/system.h | 11 +
arch/arm/lib/bootm-fdt.c | 3 +-
arch/arm/lib/bootm.c | 3 +
arch/arm/lib/psci-dt.c | 5 +-
arch/powerpc/include/asm/config_mpc85xx.h | 5 +
board/freescale/b4860qds/ddr.c | 3 +
board/freescale/ls1043aqds/ddr.c | 3 +
board/freescale/ls1043ardb/Kconfig | 9 +
board/freescale/ls1043ardb/ddr.c | 3 +
board/freescale/ls1046aqds/ddr.c | 3 +
board/freescale/ls1046ardb/ddr.c | 3 +
board/freescale/ls2080ardb/ddr.c | 3 +
board/freescale/t102xqds/ddr.c | 3 +
board/freescale/t102xrdb/ddr.c | 4 +
board/freescale/t1040qds/ddr.c | 3 +
board/freescale/t104xrdb/ddr.c | 2 +
board/freescale/t208xqds/ddr.c | 3 +
board/freescale/t208xrdb/ddr.c | 3 +
board/freescale/t4qds/ddr.c | 3 +
board/freescale/t4rdb/ddr.c | 3 +
drivers/net/fsl-mc/dpio/qbman_portal.c | 19 +-
drivers/net/fsl-mc/dpio/qbman_portal.h | 5 +-
drivers/net/fsl-mc/dpio/qbman_private.h | 19 ++
drivers/net/fsl-mc/dpio/qbman_sys.h | 18 +-
include/configs/ls1043ardb.h | 1 -
45 files changed, 624 insertions(+), 36 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1043a_psci.S
create mode 100644 arch/arm/cpu/armv8/psci.S
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-12-16 17:43 york sun
@ 2016-12-17 3:18 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-12-17 3:18 UTC (permalink / raw)
To: u-boot
On Fri, Dec 16, 2016 at 05:43:04PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 53e8ca22538c2cec691fe74098684a359302688c:
>
> MAINTAINERS: DFU: Change e-mail address for DFU maintainer
> (2016-12-12 13:03:15 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to c151cb5b516e609a0846bd392d6207a77b66a7ff:
>
> ARMv8: LS1043A: Enable LS1043A default PSCI support (2016-12-15
> 11:57:56 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161216/58251e2a/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-12-05 19:39 york sun
2016-12-06 0:37 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-12-05 19:39 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 5102af4d2f53ec8d76ce60d103c65ae062b9c8fe:
sata: sata_mv: Fix misaligned cache warnings (2016-12-05 13:53:42 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to dd2ad2f1318975da1cf64cf95a4a3b3ed44172a5:
armv8: QSPI: Add AHB bus 16MB+ size support (2016-12-05 08:32:43 -0800)
----------------------------------------------------------------
Priyanka Jain (1):
armv8: ls2080a: Add serdes1 protocol 0x3b support
Shengzhou Liu (2):
fsl/ddr: Fix compiling warning
fsl/ddr: Add erratum_a009942_check_cpo and clean related erratum
Yuan Yao (2):
ls1021a: QSPI: update the node for QSPI support
armv8: QSPI: Add AHB bus 16MB+ size support
jerry.huang at nxp.com (1):
fsl/usb: enable the errata-a005697 for ls1012a
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 7 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 7 +-
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 1 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 42 +++++++
arch/arm/dts/ls1021a.dtsi | 1 +
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 1 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 1 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 8 +-
arch/powerpc/include/asm/config_mpc85xx.h | 2 -
board/freescale/ls1021aqds/ls1021aqds.c | 6 +-
configs/ls1012afrdm_qspi_defconfig | 1 +
configs/ls1012aqds_qspi_defconfig | 1 +
configs/ls1012ardb_qspi_defconfig | 1 +
configs/ls1046ardb_qspi_defconfig | 1 +
drivers/ddr/fsl/ctrl_regs.c | 136
++++++++++++++++++++-
drivers/ddr/fsl/fsl_ddr_gen4.c | 67 +++-------
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 3 -
drivers/usb/common/fsl-errata.c | 4 +
include/fsl_ddr.h | 2 +
include/fsl_ddr_sdram.h | 3 +-
20 files changed, 233 insertions(+), 62 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-12-05 19:39 york sun
@ 2016-12-06 0:37 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-12-06 0:37 UTC (permalink / raw)
To: u-boot
On Mon, Dec 05, 2016 at 07:39:09PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 5102af4d2f53ec8d76ce60d103c65ae062b9c8fe:
>
> sata: sata_mv: Fix misaligned cache warnings (2016-12-05 13:53:42 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to dd2ad2f1318975da1cf64cf95a4a3b3ed44172a5:
>
> armv8: QSPI: Add AHB bus 16MB+ size support (2016-12-05 08:32:43 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161205/9a177006/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-11-23 19:13 york sun
2016-11-29 15:55 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-11-23 19:13 UTC (permalink / raw)
To: u-boot
Tom,
Let's try again.
The following changes since commit 693d4c9f1dc40fcf24ced459bc4d1b46db33298a:
spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (2016-11-18 21:20:59
-0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 020198b0c7d251cf6bde76024ecf0ee711860534:
image-fit: Fix compiling error caused by autoconf.h (2016-11-23
10:40:08 -0800)
----------------------------------------------------------------
Alison Wang (3):
armv8: Support loading 32-bit OS in AArch32 execution state
armv8: fsl-layerscape: SMP support for loading 32-bit OS
armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
Feng Li (1):
armv7: Add support of ls1021a-iot board
Hou Zhiqiang (1):
fsl: serdes: fix a deadloop issue for P4080
Pratiyush Srivastava (1):
armv8:ls1012a: Update bootargs for fast-boot
Priyanka Jain (8):
armv8: ls2080a: Update serdes protocol support
driver: net: ldpaa_eth: Fix missing bracket issue
armv8: lsch3: Add generic get_svr() in assembly
armv8: lsch3: Use SVR based timer base address detection
armv8: fsl-layerscape: Update TZASC registers type
armv8: fsl-layerscape : Check SVR for initializing TZASC
armv8: fsl-layerscape: Add NXP LS2088A SoC support
armv8/fsl-lsch3: Update code to release secondary cores
Shaohui Xie (3):
lpuart: add a get_lpuart_clk function
armv8: ls1046aqds: add lpuart support
armv8: ls2080aqds: fix SGMII repeater settings
Shengzhou Liu (1):
armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3
Sriram Dash (1):
powerpc: mpc512x: Add support for get_svr() for mpc512x devices
Thomas Abraham (1):
arm: exynos7420: remove custome low level init function
York Sun (2):
armv7: ls1021aiot: Fixing SPL compiling issues
image-fit: Fix compiling error caused by autoconf.h
Yuan Yao (3):
configs: ls2080ardb: Enable DSPI flash support
arm: ls1021a: improve the core frequency to 1.2GHZ
armv8: fsl-layerscape: Add README for deploying QSPI image
arch/arm/Kconfig | 21 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 13 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.h | 1 +
arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi | 42 +++
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 58 ++++
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 111 +++++--
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 6 +
arch/arm/cpu/armv8/fsl-layerscape/mp.c | 78 ++++-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 13 +-
arch/arm/cpu/armv8/sec_firmware_asm.S | 23 ++
arch/arm/cpu/armv8/start.S | 8 +
arch/arm/cpu/armv8/transition.S | 35 +-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-ls1046a-qds-lpuart.dts | 16 +
arch/arm/dts/fsl-ls1046a-qds.dtsi | 4 +
arch/arm/dts/fsl-ls1046a.dtsi | 54 +++
arch/arm/dts/ls1021a-iot-duart.dts | 16 +
arch/arm/dts/ls1021a-iot.dtsi | 103 ++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 +-
arch/arm/include/asm/arch-fsl-layerscape/mp.h | 6 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 12 +-
arch/arm/include/asm/macro.h | 176 +++++++---
arch/arm/include/asm/system.h | 121 ++++++-
arch/arm/lib/bootm.c | 45 ++-
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-exynos/soc.c | 18 +-
arch/arm/mach-rmobile/lowlevel_init_gen3.S | 9 +-
arch/powerpc/cpu/mpc512x/start.S | 5 +
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 6 +-
board/freescale/ls1021aiot/Kconfig | 15 +
board/freescale/ls1021aiot/MAINTAINERS | 7 +
board/freescale/ls1021aiot/Makefile | 9 +
board/freescale/ls1021aiot/README | 58 ++++
board/freescale/ls1021aiot/dcu.c | 47 +++
board/freescale/ls1021aiot/ls1021aiot.c | 259 +++++++++++++++
board/freescale/ls1021aiot/ls102xa_pbi.cfg | 14 +
board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg | 27 ++
board/freescale/ls1021aiot/psci.S | 28 ++
board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 2 +-
board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg | 4 +-
board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg | 4 +-
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 2 +-
board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 2 +-
board/freescale/ls1046aqds/ls1046aqds.c | 18 +
board/freescale/ls2080a/MAINTAINERS | 2 +-
board/freescale/ls2080aqds/MAINTAINERS | 2 +-
board/freescale/ls2080aqds/README | 12 +-
board/freescale/ls2080aqds/eth.c | 135 +++++++-
board/freescale/ls2080ardb/MAINTAINERS | 2 +-
board/freescale/ls2080ardb/README | 8 +-
cmd/bootefi.c | 23 +-
common/image-fit.c | 19 +-
configs/ls1021aiot_qspi_defconfig | 15 +
configs/ls1021aiot_sdcard_defconfig | 19 ++
configs/ls1046aqds_lpuart_defconfig | 30 ++
drivers/net/ldpaa_eth/ldpaa_eth.c | 3 +-
drivers/serial/serial_lpuart.c | 7 +-
include/configs/exynos7420-common.h | 1 +
include/configs/ls1012a_common.h | 2 +-
include/configs/ls1021aiot.h | 366
+++++++++++++++++++++
include/configs/ls1046aqds.h | 8 +
include/configs/ls2080ardb.h | 1 +
64 files changed, 2025 insertions(+), 145 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
create mode 100644 arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
create mode 100644 arch/arm/dts/ls1021a-iot-duart.dts
create mode 100644 arch/arm/dts/ls1021a-iot.dtsi
create mode 100644 board/freescale/ls1021aiot/Kconfig
create mode 100644 board/freescale/ls1021aiot/MAINTAINERS
create mode 100644 board/freescale/ls1021aiot/Makefile
create mode 100644 board/freescale/ls1021aiot/README
create mode 100644 board/freescale/ls1021aiot/dcu.c
create mode 100644 board/freescale/ls1021aiot/ls1021aiot.c
create mode 100644 board/freescale/ls1021aiot/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021aiot/psci.S
create mode 100644 configs/ls1021aiot_qspi_defconfig
create mode 100644 configs/ls1021aiot_sdcard_defconfig
create mode 100644 configs/ls1046aqds_lpuart_defconfig
create mode 100644 include/configs/ls1021aiot.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-11-23 19:13 york sun
@ 2016-11-29 15:55 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-11-29 15:55 UTC (permalink / raw)
To: u-boot
On Wed, Nov 23, 2016 at 07:13:25PM +0000, york sun wrote:
> Tom,
>
> Let's try again.
>
> The following changes since commit 693d4c9f1dc40fcf24ced459bc4d1b46db33298a:
>
> spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (2016-11-18 21:20:59
> -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 020198b0c7d251cf6bde76024ecf0ee711860534:
>
> image-fit: Fix compiling error caused by autoconf.h (2016-11-23
> 10:40:08 -0800)
>
Some time ago (and I don't know where the email went, applied to
u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161129/38f26800/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-11-23 1:06 york sun
2016-11-23 12:22 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-11-23 1:06 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 693d4c9f1dc40fcf24ced459bc4d1b46db33298a:
spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (2016-11-18 21:20:59
-0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 3db86f4bbd7a723421c8c9bf9bd09d58e17e9736:
armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
(2016-11-22 11:40:24 -0800)
----------------------------------------------------------------
Alison Wang (3):
armv8: Support loading 32-bit OS in AArch32 execution state
armv8: fsl-layerscape: SMP support for loading 32-bit OS
armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
Feng Li (1):
armv7: Add support of ls1021a-iot board
Hou Zhiqiang (1):
fsl: serdes: fix a deadloop issue for P4080
Pratiyush Srivastava (1):
armv8:ls1012a: Update bootargs for fast-boot
Priyanka Jain (8):
armv8: ls2080a: Update serdes protocol support
driver: net: ldpaa_eth: Fix missing bracket issue
armv8: lsch3: Add generic get_svr() in assembly
armv8: lsch3: Use SVR based timer base address detection
armv8: fsl-layerscape: Update TZASC registers type
armv8: fsl-layerscape : Check SVR for initializing TZASC
armv8: fsl-layerscape: Add NXP LS2088A SoC support
armv8/fsl-lsch3: Update code to release secondary cores
Shaohui Xie (3):
lpuart: add a get_lpuart_clk function
armv8: ls1046aqds: add lpuart support
armv8: ls2080aqds: fix SGMII repeater settings
Shengzhou Liu (1):
armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3
Sriram Dash (1):
powerpc: mpc512x: Add support for get_svr() for mpc512x devices
Thomas Abraham (1):
arm: exynos7420: remove custome low level init function
Yuan Yao (3):
configs: ls2080ardb: Enable DSPI flash support
arm: ls1021a: improve the core frequency to 1.2GHZ
armv8: fsl-layerscape: Add README for deploying QSPI image
arch/arm/Kconfig | 21 ++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 13 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.h | 1 +
arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi | 42 +++
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 58 ++++
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 111 +++++--
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 6 +
arch/arm/cpu/armv8/fsl-layerscape/mp.c | 78 ++++-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 13 +-
arch/arm/cpu/armv8/sec_firmware_asm.S | 23 ++
arch/arm/cpu/armv8/start.S | 8 +
arch/arm/cpu/armv8/transition.S | 35 +-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/fsl-ls1046a-qds-lpuart.dts | 16 +
arch/arm/dts/fsl-ls1046a-qds.dtsi | 4 +
arch/arm/dts/fsl-ls1046a.dtsi | 54 +++
arch/arm/dts/ls1021a-iot-duart.dts | 16 +
arch/arm/dts/ls1021a-iot.dtsi | 103 ++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 +-
arch/arm/include/asm/arch-fsl-layerscape/mp.h | 6 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 12 +-
arch/arm/include/asm/macro.h | 176 +++++++---
arch/arm/include/asm/system.h | 121 ++++++-
arch/arm/lib/bootm.c | 45 ++-
arch/arm/mach-exynos/Kconfig | 1 +
arch/arm/mach-exynos/soc.c | 18 +-
arch/arm/mach-rmobile/lowlevel_init_gen3.S | 9 +-
arch/powerpc/cpu/mpc512x/start.S | 5 +
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 6 +-
board/freescale/ls1021aiot/Kconfig | 15 +
board/freescale/ls1021aiot/MAINTAINERS | 7 +
board/freescale/ls1021aiot/Makefile | 9 +
board/freescale/ls1021aiot/README | 58 ++++
board/freescale/ls1021aiot/dcu.c | 47 +++
board/freescale/ls1021aiot/ls1021aiot.c | 259 +++++++++++++++
board/freescale/ls1021aiot/ls102xa_pbi.cfg | 14 +
board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg | 27 ++
board/freescale/ls1021aiot/psci.S | 28 ++
board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 2 +-
board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg | 4 +-
board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg | 4 +-
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 2 +-
board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 2 +-
board/freescale/ls1046aqds/ls1046aqds.c | 18 +
board/freescale/ls2080a/MAINTAINERS | 2 +-
board/freescale/ls2080aqds/MAINTAINERS | 2 +-
board/freescale/ls2080aqds/README | 12 +-
board/freescale/ls2080aqds/eth.c | 135 +++++++-
board/freescale/ls2080ardb/MAINTAINERS | 2 +-
board/freescale/ls2080ardb/README | 8 +-
cmd/bootefi.c | 23 +-
common/image-fit.c | 19 +-
configs/ls1021aiot_qspi_defconfig | 15 +
configs/ls1021aiot_sdcard_defconfig | 17 +
configs/ls1046aqds_lpuart_defconfig | 30 ++
drivers/net/ldpaa_eth/ldpaa_eth.c | 3 +-
drivers/serial/serial_lpuart.c | 7 +-
include/configs/exynos7420-common.h | 1 +
include/configs/ls1012a_common.h | 2 +-
include/configs/ls1021aiot.h | 367
+++++++++++++++++++++
include/configs/ls1046aqds.h | 8 +
include/configs/ls2080ardb.h | 1 +
64 files changed, 2024 insertions(+), 145 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/doc/README.qspi
create mode 100644 arch/arm/dts/fsl-ls1046a-qds-lpuart.dts
create mode 100644 arch/arm/dts/ls1021a-iot-duart.dts
create mode 100644 arch/arm/dts/ls1021a-iot.dtsi
create mode 100644 board/freescale/ls1021aiot/Kconfig
create mode 100644 board/freescale/ls1021aiot/MAINTAINERS
create mode 100644 board/freescale/ls1021aiot/Makefile
create mode 100644 board/freescale/ls1021aiot/README
create mode 100644 board/freescale/ls1021aiot/dcu.c
create mode 100644 board/freescale/ls1021aiot/ls1021aiot.c
create mode 100644 board/freescale/ls1021aiot/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021aiot/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021aiot/psci.S
create mode 100644 configs/ls1021aiot_qspi_defconfig
create mode 100644 configs/ls1021aiot_sdcard_defconfig
create mode 100644 configs/ls1046aqds_lpuart_defconfig
create mode 100644 include/configs/ls1021aiot.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-11-23 1:06 york sun
@ 2016-11-23 12:22 ` Tom Rini
2016-11-23 16:53 ` york sun
0 siblings, 1 reply; 147+ messages in thread
From: Tom Rini @ 2016-11-23 12:22 UTC (permalink / raw)
To: u-boot
On Wed, Nov 23, 2016 at 01:06:12AM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 693d4c9f1dc40fcf24ced459bc4d1b46db33298a:
>
> spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (2016-11-18 21:20:59
> -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 3db86f4bbd7a723421c8c9bf9bd09d58e17e9736:
>
> armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
> (2016-11-22 11:40:24 -0800)
NAK. Two problems:
+(ls1021aiot_sdcard) static int mmc_load_image_raw_sector(struct spl_image_info *spl_image, +(ls1021aiot_sdcard) ^ +(ls1021aiot_sdcard) Error: You must add new CONFIG options using Kconfig +(ls1021aiot_sdcard) The following new ad-hoc CONFIG options were detected: +(ls1021aiot_sdcard) CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS +(ls1021aiot_sdcard) +(ls1021aiot_sdcard) Please add these via Kconfig instead. Find a suitable Kconfig +(ls1021aiot_sdcard) file and add a 'config' or 'menuconfig' option. +(ls1021aiot_sdcard) make[1]: *** [all] Error 1
And:
+(odroid-xu3) #define CONFIG_SYS_BOARD "smdk5420" +(odroid-xu3) ^ +(odroid-xu3) In file included from include/config.h:5:0, +(odroid-xu3) from ../include/common.h:18, +(odroid-xu3) from ../common/image-fit.c:17: +(odroid-xu3) ../include/configs/odroid_xu3.h:107:0: note: this is the location of the previous definition +(odroid-xu3) #define CONFIG_SYS_BOARD "odroid"
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20161123/55f26ff6/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-11-23 12:22 ` Tom Rini
@ 2016-11-23 16:53 ` york sun
0 siblings, 0 replies; 147+ messages in thread
From: york sun @ 2016-11-23 16:53 UTC (permalink / raw)
To: u-boot
On 11/23/2016 04:22 AM, Tom Rini wrote:
> On Wed, Nov 23, 2016 at 01:06:12AM +0000, york sun wrote:
>> Tom,
>>
>> The following changes since commit 693d4c9f1dc40fcf24ced459bc4d1b46db33298a:
>>
>> spl: Remove CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS (2016-11-18 21:20:59
>> -0500)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-fsl-qoriq.git
>>
>> for you to fetch changes up to 3db86f4bbd7a723421c8c9bf9bd09d58e17e9736:
>>
>> armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
>> (2016-11-22 11:40:24 -0800)
>
> NAK. Two problems:
> +(ls1021aiot_sdcard) static int mmc_load_image_raw_sector(struct spl_image_info *spl_image, +(ls1021aiot_sdcard) ^ +(ls1021aiot_sdcard) Error: You must add new CONFIG options using Kconfig +(ls1021aiot_sdcard) The following new ad-hoc CONFIG options were detected: +(ls1021aiot_sdcard) CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS +(ls1021aiot_sdcard) +(ls1021aiot_sdcard) Please add these via Kconfig instead. Find a suitable Kconfig +(ls1021aiot_sdcard) file and add a 'config' or 'menuconfig' option. +(ls1021aiot_sdcard) make[1]: *** [all] Error 1
>
> And:
> +(odroid-xu3) #define CONFIG_SYS_BOARD "smdk5420" +(odroid-xu3) ^ +(odroid-xu3) In file included from include/config.h:5:0, +(odroid-xu3) from ../include/common.h:18, +(odroid-xu3) from ../common/image-fit.c:17: +(odroid-xu3) ../include/configs/odroid_xu3.h:107:0: note: this is the location of the previous definition +(odroid-xu3) #define CONFIG_SYS_BOARD "odroid"
>
Hmm, I didn't see these issues. I will try again.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-09-20 18:09 york sun
2016-09-20 19:31 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-09-20 18:09 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
Prepare v2016.09 (2016-09-12 10:05:51 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 126fe70d7746d7e60a6331391cab6713368b78dc:
armv8: ls1046aqds: Add LS1046AQDS board support (2016-09-14 14:11:10
-0700)
----------------------------------------------------------------
Hongbo Zhang (4):
armv7: psci: make v7_flush_dcache_all public for all psci code
nxp: ls102xa: add registers definition for system sleep
nxp: ls102xa: add EPU Finite State Machine
nxp: ls102xa: add LS1 PSCI system suspend
Hou Zhiqiang (5):
fsl: serdes: ensure accessing the initialized maps of serdes protocol
arm: fsl-layerscape: move forward the non-secure access
permission setup
fsl: csu: add an API to set individual device access permission
fsl: csu: add an API to set R/W permission to PCIe
fsl-layerscape: Add workaround for PCIe erratum A010315
Mingkai Hu (2):
armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag
RAM latency
armv8: ls1046ardb: Add LS1046ARDB board support
Qianyu Gong (2):
net: fm: fix spi flash probe for using driver model
armv8: fsl-layerscape: spl: remove BSS clearing and board_init_r
Shaohui Xie (5):
ddr: fsl: fix a compile issue
Export memset for standalone AQ FW load apps
armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for
standalone app
armv8: ls1046a: disable SATA ECC in DCSR
armv8: ls1046aqds: Add LS1046AQDS board support
Shengzhou Liu (4):
armv8: fsl-layerscape: Update ddr erratum a008336
armv7:ls1021a: Enable workaround for DDR erratum A-009942
driver/ddr/fsl: Add general MMDC driver and reuse common MMDC
driver for ls1012a
armv8: ls1046a: Enable DDR erratum for ls1046a
Sumit Garg (2):
board: ls1043ardb: move sec_init to board_init
ls1043ardb: PPA: add PPA validation in case of secure boot
York Sun (3):
driver/ddr/fsl: Add more debug registers
driver/ddr/fsl: Revise workaround A008511 for A009803
armv8: ls2080a: Remove debug server support
Makefile | 1 +
README | 6 -
arch/arm/Kconfig | 26 ++
arch/arm/cpu/armv7/ls102xa/Makefile | 2 +-
arch/arm/cpu/armv7/ls102xa/fsl_epu.c | 157 +++++++
arch/arm/cpu/armv7/ls102xa/fsl_epu.h | 8 +
arch/arm/cpu/armv7/ls102xa/fsl_ls1_serdes.c | 15 +-
arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c | 236 ++++++++++
arch/arm/cpu/armv7/ls102xa/psci.S | 11 +
arch/arm/cpu/armv7/ls102xa/soc.c | 19 +
arch/arm/cpu/armv7/psci.S | 6 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 5 -
.../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 12 +
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 12 +
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 15 +
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 21 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 31 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 9 -
arch/arm/dts/Makefile | 2 +
arch/arm/dts/fsl-ls1046a-qds-duart.dts | 16 +
arch/arm/dts/fsl-ls1046a-qds.dtsi | 77 ++++
arch/arm/dts/fsl-ls1046a-rdb.dts | 44 ++
arch/arm/dts/fsl-ls1046a.dtsi | 166 +++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 14 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 8 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 9 -
.../include/asm/arch-fsl-layerscape/ns_access.h | 1 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 4 +
arch/arm/include/asm/arch-ls102xa/config.h | 4 +
arch/arm/include/asm/arch-ls102xa/fsl_serdes.h | 4 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 52 ++-
arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h | 4 +
arch/arm/include/asm/fsl_secure_boot.h | 18 +
arch/arm/include/asm/psci.h | 2 +
arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/c29x_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 18 +
arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 8 +
arch/powerpc/cpu/mpc85xx/mpc8536_serdes.c | 20 +-
arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c | 20 +-
arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/p1010_serdes.c | 20 +-
arch/powerpc/cpu/mpc85xx/p1021_serdes.c | 9 +
arch/powerpc/cpu/mpc85xx/p1022_serdes.c | 20 +-
arch/powerpc/cpu/mpc85xx/p1023_serdes.c | 12 +-
arch/powerpc/cpu/mpc85xx/p2020_serdes.c | 9 +
arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c | 20 +-
arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c | 20 +-
arch/powerpc/include/asm/fsl_serdes.h | 4 +
board/freescale/common/arm_sleep.c | 35 +-
board/freescale/common/ns_access.c | 62 ++-
board/freescale/common/vid.c | 8 +-
board/freescale/ls1012afrdm/ls1012afrdm.c | 121 -----
board/freescale/ls1012aqds/ls1012aqds.c | 121 +----
board/freescale/ls1012ardb/ls1012ardb.c | 125 +-----
board/freescale/ls1021aqds/ls1021aqds.c | 8 +-
board/freescale/ls1021atwr/ls1021atwr.c | 15 +-
board/freescale/ls1043aqds/ls1043aqds.c | 8 +-
board/freescale/ls1043ardb/ls1043ardb.c | 37 +-
board/freescale/ls1046aqds/Kconfig | 15 +
board/freescale/ls1046aqds/MAINTAINERS | 10 +
board/freescale/ls1046aqds/Makefile | 9 +
board/freescale/ls1046aqds/README | 70 +++
board/freescale/ls1046aqds/ddr.c | 140 ++++++
board/freescale/ls1046aqds/ddr.h | 44 ++
board/freescale/ls1046aqds/eth.c | 415
++++++++++++++++++
board/freescale/ls1046aqds/ls1046aqds.c | 298 +++++++++++++
board/freescale/ls1046aqds/ls1046aqds_pbi.cfg | 17 +
board/freescale/ls1046aqds/ls1046aqds_qixis.h | 39 ++
board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg | 7 +
.../freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg | 8 +
.../ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg | 8 +
board/freescale/ls1046ardb/Kconfig | 16 +
board/freescale/ls1046ardb/MAINTAINERS | 9 +
board/freescale/ls1046ardb/Makefile | 10 +
board/freescale/ls1046ardb/README | 76 ++++
board/freescale/ls1046ardb/cpld.c | 158 +++++++
board/freescale/ls1046ardb/cpld.h | 49 +++
board/freescale/ls1046ardb/ddr.c | 140 ++++++
board/freescale/ls1046ardb/ddr.h | 44 ++
board/freescale/ls1046ardb/eth.c | 77 ++++
board/freescale/ls1046ardb/ls1046ardb.c | 136 ++++++
board/freescale/ls1046ardb/ls1046ardb_pbi.cfg | 22 +
board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg | 7 +
board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg | 7 +
board/freescale/ls2080a/ls2080a.c | 5 -
board/freescale/ls2080aqds/ls2080aqds.c | 4 -
board/freescale/ls2080ardb/ls2080ardb.c | 4 -
configs/ls1046aqds_defconfig | 28 ++
configs/ls1046aqds_nand_defconfig | 30 ++
configs/ls1046aqds_qspi_defconfig | 31 ++
configs/ls1046aqds_sdcard_ifc_defconfig | 30 ++
configs/ls1046aqds_sdcard_qspi_defconfig | 32 ++
configs/ls1046ardb_emmc_defconfig | 27 ++
configs/ls1046ardb_qspi_defconfig | 26 ++
configs/ls1046ardb_sdcard_defconfig | 27 ++
drivers/ddr/fsl/Makefile | 1 +
drivers/ddr/fsl/fsl_ddr_gen4.c | 92 ++--
drivers/ddr/fsl/fsl_mmdc.c | 156 +++++++
drivers/ddr/fsl/interactive.c | 4 +-
drivers/misc/Makefile | 1 -
drivers/misc/fsl_debug_server.c | 250 -----------
drivers/net/fm/fm.c | 10 +
include/_exports.h | 1 +
include/configs/ls1012afrdm.h | 22 +-
include/configs/ls1012aqds.h | 23 +-
include/configs/ls1012ardb.h | 21 +-
include/configs/ls1021aqds.h | 8 +
include/configs/ls1021atwr.h | 1 +
include/configs/ls1046a_common.h | 211 +++++++++
include/configs/ls1046aqds.h | 487
+++++++++++++++++++++
include/configs/ls1046ardb.h | 240 ++++++++++
include/configs/ls2080a_common.h | 8 +-
include/exports.h | 2 +-
include/fsl_csu.h | 2 +
include/fsl_ddr_sdram.h | 2 +-
include/fsl_debug_server.h | 32 --
include/fsl_immap.h | 3 +-
include/fsl_mmdc.h | 95 ++--
122 files changed, 4674 insertions(+), 864 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c
create mode 100644 arch/arm/dts/fsl-ls1046a-qds-duart.dts
create mode 100644 arch/arm/dts/fsl-ls1046a-qds.dtsi
create mode 100644 arch/arm/dts/fsl-ls1046a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls1046a.dtsi
create mode 100644 board/freescale/ls1046aqds/Kconfig
create mode 100644 board/freescale/ls1046aqds/MAINTAINERS
create mode 100644 board/freescale/ls1046aqds/Makefile
create mode 100644 board/freescale/ls1046aqds/README
create mode 100644 board/freescale/ls1046aqds/ddr.c
create mode 100644 board/freescale/ls1046aqds/ddr.h
create mode 100644 board/freescale/ls1046aqds/eth.c
create mode 100644 board/freescale/ls1046aqds/ls1046aqds.c
create mode 100644 board/freescale/ls1046aqds/ls1046aqds_pbi.cfg
create mode 100644 board/freescale/ls1046aqds/ls1046aqds_qixis.h
create mode 100644 board/freescale/ls1046aqds/ls1046aqds_rcw_nand.cfg
create mode 100644 board/freescale/ls1046aqds/ls1046aqds_rcw_sd_ifc.cfg
create mode 100644 board/freescale/ls1046aqds/ls1046aqds_rcw_sd_qspi.cfg
create mode 100644 board/freescale/ls1046ardb/Kconfig
create mode 100644 board/freescale/ls1046ardb/MAINTAINERS
create mode 100644 board/freescale/ls1046ardb/Makefile
create mode 100644 board/freescale/ls1046ardb/README
create mode 100644 board/freescale/ls1046ardb/cpld.c
create mode 100644 board/freescale/ls1046ardb/cpld.h
create mode 100644 board/freescale/ls1046ardb/ddr.c
create mode 100644 board/freescale/ls1046ardb/ddr.h
create mode 100644 board/freescale/ls1046ardb/eth.c
create mode 100644 board/freescale/ls1046ardb/ls1046ardb.c
create mode 100644 board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
create mode 100644 board/freescale/ls1046ardb/ls1046ardb_rcw_emmc.cfg
create mode 100644 board/freescale/ls1046ardb/ls1046ardb_rcw_sd.cfg
create mode 100644 configs/ls1046aqds_defconfig
create mode 100644 configs/ls1046aqds_nand_defconfig
create mode 100644 configs/ls1046aqds_qspi_defconfig
create mode 100644 configs/ls1046aqds_sdcard_ifc_defconfig
create mode 100644 configs/ls1046aqds_sdcard_qspi_defconfig
create mode 100644 configs/ls1046ardb_emmc_defconfig
create mode 100644 configs/ls1046ardb_qspi_defconfig
create mode 100644 configs/ls1046ardb_sdcard_defconfig
create mode 100644 drivers/ddr/fsl/fsl_mmdc.c
delete mode 100644 drivers/misc/fsl_debug_server.c
create mode 100644 include/configs/ls1046a_common.h
create mode 100644 include/configs/ls1046aqds.h
create mode 100644 include/configs/ls1046ardb.h
delete mode 100644 include/fsl_debug_server.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-09-20 18:09 york sun
@ 2016-09-20 19:31 ` Tom Rini
2016-09-20 19:55 ` york sun
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
0 siblings, 2 replies; 147+ messages in thread
From: Tom Rini @ 2016-09-20 19:31 UTC (permalink / raw)
To: u-boot
On Tue, Sep 20, 2016 at 06:09:47PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
>
> Prepare v2016.09 (2016-09-12 10:05:51 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 126fe70d7746d7e60a6331391cab6713368b78dc:
>
> armv8: ls1046aqds: Add LS1046AQDS board support (2016-09-14 14:11:10
> -0700)
>
NAK. At least:
aarch64: + ls1012afrdm_qspi
+(ls1012afrdm_qspi) Error: You must add new CONFIG options using Kconfig
+(ls1012afrdm_qspi) The following new ad-hoc CONFIG options were detected:
+(ls1012afrdm_qspi) CONFIG_MMDC_MDASP
+(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG0
+(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG1
+(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG2
+(ls1012afrdm_qspi) CONFIG_MMDC_MDCTL
+(ls1012afrdm_qspi) CONFIG_MMDC_MDMISC
+(ls1012afrdm_qspi) CONFIG_MMDC_MDOR
+(ls1012afrdm_qspi) CONFIG_MMDC_MDOTC
+(ls1012afrdm_qspi) CONFIG_MMDC_MDPDC
+(ls1012afrdm_qspi) CONFIG_MMDC_MDREF
+(ls1012afrdm_qspi) CONFIG_MMDC_MDRWD
+(ls1012afrdm_qspi) CONFIG_MMDC_MPODTCTRL
+(ls1012afrdm_qspi) CONFIG_MMDC_MPZQHWCTRL
+(ls1012afrdm_qspi) CONFIG_SYS_FSL_ERRATUM_A010315
+(ls1012afrdm_qspi) CONFIG_SYS_FSL_MMDC
+(ls1012afrdm_qspi)
+(ls1012afrdm_qspi) Please add these via Kconfig instead. Find a suitable Kconfig
+(ls1012afrdm_qspi) file and add a 'config' or 'menuconfig' option.
+(ls1012afrdm_qspi) make[1]: *** [no_new_adhoc_configs_check] Error 1
+(ls1012afrdm_qspi) make: *** [sub-make] Error 2
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160920/50d65b98/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-09-20 19:31 ` Tom Rini
@ 2016-09-20 19:55 ` york sun
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
1 sibling, 0 replies; 147+ messages in thread
From: york sun @ 2016-09-20 19:55 UTC (permalink / raw)
To: u-boot
On 09/20/2016 12:30 PM, Tom Rini wrote:
> On Tue, Sep 20, 2016 at 06:09:47PM +0000, york sun wrote:
>
>> Tom,
>>
>> The following changes since commit 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
>>
>> Prepare v2016.09 (2016-09-12 10:05:51 -0400)
>>
>> are available in the git repository at:
>>
>> git://git.denx.de/u-boot-fsl-qoriq.git
>>
>> for you to fetch changes up to 126fe70d7746d7e60a6331391cab6713368b78dc:
>>
>> armv8: ls1046aqds: Add LS1046AQDS board support (2016-09-14 14:11:10
>> -0700)
>>
>
> NAK. At least:
> aarch64: + ls1012afrdm_qspi
> +(ls1012afrdm_qspi) Error: You must add new CONFIG options using Kconfig
> +(ls1012afrdm_qspi) The following new ad-hoc CONFIG options were detected:
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDASP
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG0
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG1
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG2
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCTL
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDMISC
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDOR
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDOTC
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDPDC
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDREF
> +(ls1012afrdm_qspi) CONFIG_MMDC_MDRWD
> +(ls1012afrdm_qspi) CONFIG_MMDC_MPODTCTRL
> +(ls1012afrdm_qspi) CONFIG_MMDC_MPZQHWCTRL
> +(ls1012afrdm_qspi) CONFIG_SYS_FSL_ERRATUM_A010315
> +(ls1012afrdm_qspi) CONFIG_SYS_FSL_MMDC
> +(ls1012afrdm_qspi)
> +(ls1012afrdm_qspi) Please add these via Kconfig instead. Find a suitable Kconfig
> +(ls1012afrdm_qspi) file and add a 'config' or 'menuconfig' option.
> +(ls1012afrdm_qspi) make[1]: *** [no_new_adhoc_configs_check] Error 1
> +(ls1012afrdm_qspi) make: *** [sub-make] Error 2
>
Tom,
I don't see this issue in my tree, and I didn't request a pull with
change to ls1012afrdm_qspi either.
York
^ permalink raw reply [flat|nested] 147+ messages in thread[parent not found: <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>]
* [U-Boot] Please pull u-boot-fsl-qoriq master
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
@ 2016-09-20 20:23 ` york sun
0 siblings, 0 replies; 147+ messages in thread
From: york sun @ 2016-09-20 20:23 UTC (permalink / raw)
To: u-boot
On 09/20/2016 12:55 PM, york.sun at nxp.com wrote:
> On 09/20/2016 12:30 PM, Tom Rini wrote:
>> On Tue, Sep 20, 2016 at 06:09:47PM +0000, york sun wrote:
>>
>>> Tom,
>>>
>>> The following changes since commit
>>> 8cbb389bb3da80cbf8911f8386cbff92c6a78afe:
>>>
>>> Prepare v2016.09 (2016-09-12 10:05:51 -0400)
>>>
>>> are available in the git repository at:
>>>
>>> git://git.denx.de/u-boot-fsl-qoriq.git
>>>
>>> for you to fetch changes up to 126fe70d7746d7e60a6331391cab6713368b78dc:
>>>
>>> armv8: ls1046aqds: Add LS1046AQDS board support (2016-09-14 14:11:10
>>> -0700)
>>>
>>
>> NAK. At least:
>> aarch64: + ls1012afrdm_qspi
>> +(ls1012afrdm_qspi) Error: You must add new CONFIG options using Kconfig
>> +(ls1012afrdm_qspi) The following new ad-hoc CONFIG options were
>> detected:
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDASP
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG0
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG1
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCFG2
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDCTL
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDMISC
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDOR
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDOTC
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDPDC
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDREF
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MDRWD
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MPODTCTRL
>> +(ls1012afrdm_qspi) CONFIG_MMDC_MPZQHWCTRL
>> +(ls1012afrdm_qspi) CONFIG_SYS_FSL_ERRATUM_A010315
>> +(ls1012afrdm_qspi) CONFIG_SYS_FSL_MMDC
>> +(ls1012afrdm_qspi)
>> +(ls1012afrdm_qspi) Please add these via Kconfig instead. Find a
>> suitable Kconfig
>> +(ls1012afrdm_qspi) file and add a 'config' or 'menuconfig' option.
>> +(ls1012afrdm_qspi) make[1]: *** [no_new_adhoc_configs_check] Error 1
>> +(ls1012afrdm_qspi) make: *** [sub-make] Error 2
>>
>
> Tom,
>
> I don't see this issue in my tree, and I didn't request a pull with
> change to ls1012afrdm_qspi either.
>
Now I see it. Let me work on it. I also need to check why my test script
missed this one.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-08-02 23:42 york sun
2016-08-03 12:19 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-08-02 23:42 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 26fb8db0f4d1e7c118b5e8f3a8849f359b91c166:
Merge git://git.denx.de/u-boot-rockchip (2016-07-31 20:31:13 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to ab01ef5fa617444fd95543ee04ea53ccda273269:
ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIP
(2016-08-02 09:51:29 -0700)
----------------------------------------------------------------
Hou Zhiqiang (4):
arm/PSCI: Removed unused code
arm/PSCI: Fixed the backward compatiblity issue
arm/PSCI: Add support for creating ARMv7 PSCI version 1.0 DT node
ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIP
Prabhakar Kushwaha (3):
board: ls1012aqds: Update LBMAP_MASK and RST_CTL_RESET
armv8: ls1012a: Enable DDR row-bank-column decoding
armv8: ls1012a: Update Refresh cycle for DDR
Sumit Garg (1):
crypto/fsl: Update blob cmd to accept 64bit addresses
Wenbin Song (1):
armv8: ls1043a: enable pxe commands
York Sun (3):
powerpc/mpc85xx: Update erratum workaround for A006379
board/freescale: Update MAINTAINERS files
driver/ddr/fsl: Fix timing_cfg_2
Yunhui Cui (1):
driver: spi: fsl-qspi: remove compile Warnings
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 2 +-
arch/arm/include/asm/psci.h | 3 ++
arch/arm/lib/psci-dt.c | 80
+++++++++++++++------------------
arch/powerpc/include/asm/immap_85xx.h | 2 +-
board/freescale/b4860qds/MAINTAINERS | 2 +-
board/freescale/bsc9132qds/MAINTAINERS | 2 +-
board/freescale/corenet_ds/MAINTAINERS | 2 +-
board/freescale/ls1021atwr/MAINTAINERS | 4 ++
board/freescale/ls1043ardb/MAINTAINERS | 2 +-
board/freescale/t1040qds/MAINTAINERS | 2 +-
board/freescale/t104xrdb/MAINTAINERS | 6 ++-
board/freescale/t208xqds/MAINTAINERS | 2 +-
board/freescale/t208xrdb/MAINTAINERS | 2 +-
board/freescale/t4qds/MAINTAINERS | 2 +-
cmd/blob.c | 2 +-
drivers/crypto/fsl/fsl_blob.c | 13 ++++--
drivers/ddr/fsl/ctrl_regs.c | 2 +-
drivers/spi/fsl_qspi.c | 4 +-
include/configs/ls1012aqds.h | 4 +-
include/configs/ls1043a_common.h | 2 +
include/configs/ls1043ardb.h | 4 +-
include/fsl_mmdc.h | 4 +-
22 files changed, 82 insertions(+), 66 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-08-02 23:42 york sun
@ 2016-08-03 12:19 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-08-03 12:19 UTC (permalink / raw)
To: u-boot
On Tue, Aug 02, 2016 at 11:42:46PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 26fb8db0f4d1e7c118b5e8f3a8849f359b91c166:
>
> Merge git://git.denx.de/u-boot-rockchip (2016-07-31 20:31:13 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to ab01ef5fa617444fd95543ee04ea53ccda273269:
>
> ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIP
> (2016-08-02 09:51:29 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160803/be446e40/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-07-26 20:28 york sun
2016-07-27 0:58 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-07-26 20:28 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 29d63a59eaf1c9f3b37e249cda2a97e5e4f183f8:
ARM: uniphier: add clock/reset settings for xHCI of ProXstream2
(2016-07-24 00:44:55 +0900)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 8401c7103d73b4010df95bf8bc79a60f378f1e50:
armv8: ls1043aqds: add IFC fixup in case QSPI is enabled (2016-07-26
09:03:50 -0700)
----------------------------------------------------------------
Alison Wang (1):
armv8: fsl-layerscape: Add A72 core detection
Hongbo Zhang (4):
ARMv7: PSCI: add PSCI v1.0 functions skeleton
ARMv7: PSCI: ls102xa: check target CPU ID before further operations
ARMv7: PSCI: ls102xa: add more PSCI v1.0 functions implemention
ARMv7: PSCI: ls102xa: move secure text section into OCRAM
Mingkai Hu (2):
armv8: fsl_lsch2: Add LS1046A SoC support
drivers: net/fm: Add Fman support for LS1046A
Qianyu Gong (3):
armv8: fsl-layerscape: Consolidate the LSCH2 common defines
armv8: fsl_lsch2: Add SerDes 2 support
armv8: ls1043aqds: add IFC fixup in case QSPI is enabled
Rajesh Bhagat (1):
include: usb: Rename USB controller base address mapping
Sumit Garg (4):
DM: crypto/fsl: Enable rsa DM driver usage before relocation
SECURE_BOOT: Enable chain of trust in SPL framework
SECURE_BOOT: Enable SD as a source for bootscript
arm: ls1021atwr: Add SD secure boot target
Wenbin Song (2):
ARMv8/ls1046a: Cleanup the environment variables
armv8/ls1043a: Add MTD partition scheme
York Sun (3):
armv8: ls2080aqds: Update MAINTAINERS
armv8: ls1043aqds: Update MAINTAINERS
armv8: fsl-layerscape: mmu: Fix enabling MMU
mario.six at gdsys.cc (1):
i2c: fsl: Fix driver initialization
arch/arm/cpu/armv7/ls102xa/psci.S | 138
++++++++++++++++++++-
arch/arm/cpu/armv7/psci.S | 78 ++++++++++++
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 8 +-
arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 42 +++++++
.../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 19 +++
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 25 +++-
arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c | 99 +++++++++++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 82 ++++++------
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 2 +
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 3 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 9 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 5 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 2 +
arch/arm/include/asm/arch-ls102xa/config.h | 9 +-
arch/arm/include/asm/fsl_secure_boot.h | 68 +++++++---
arch/arm/include/asm/psci.h | 21 ++++
arch/powerpc/include/asm/fsl_secure_boot.h | 4 +-
board/freescale/common/fsl_chain_of_trust.c | 34 ++++-
board/freescale/ls1021aqds/Makefile | 1 +
board/freescale/ls1021aqds/psci.S | 33 +++++
board/freescale/ls1021atwr/Makefile | 1 +
board/freescale/ls1021atwr/ls1021atwr.c | 7 ++
board/freescale/ls1021atwr/psci.S | 25 ++++
board/freescale/ls1043aqds/MAINTAINERS | 1 +
board/freescale/ls1043aqds/ls1043aqds.c | 10 ++
board/freescale/ls2080aqds/MAINTAINERS | 1 +
.../ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 31 +++++
drivers/crypto/fsl/fsl_rsa.c | 1 +
drivers/i2c/fsl_i2c.c | 9 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/ls1046.c | 123
++++++++++++++++++
include/config_fsl_chain_trust.h | 18 +--
include/configs/ls1021aqds.h | 5 +
include/configs/ls1021atwr.h | 25 ++++
include/configs/ls1043a_common.h | 25 +++-
include/linux/usb/xhci-fsl.h | 20 ++-
include/usb/ehci-ci.h | 2 +-
38 files changed, 887 insertions(+), 104 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1046a_serdes.c
create mode 100644 board/freescale/ls1021aqds/psci.S
create mode 100644 board/freescale/ls1021atwr/psci.S
create mode 100644 configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
create mode 100644 drivers/net/fm/ls1046.c
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-07-26 20:28 york sun
@ 2016-07-27 0:58 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-07-27 0:58 UTC (permalink / raw)
To: u-boot
On Tue, Jul 26, 2016 at 08:28:50PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 29d63a59eaf1c9f3b37e249cda2a97e5e4f183f8:
>
> ARM: uniphier: add clock/reset settings for xHCI of ProXstream2
> (2016-07-24 00:44:55 +0900)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 8401c7103d73b4010df95bf8bc79a60f378f1e50:
>
> armv8: ls1043aqds: add IFC fixup in case QSPI is enabled (2016-07-26
> 09:03:50 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160726/256391b0/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-07-19 20:29 york sun
2016-07-20 2:22 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-07-19 20:29 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 3a592a1349ac3961b0f4f2db0a8d9f128225d897:
Revert "armv8: Enable CPUECTLR.SMPEN for coherency" (2016-07-14
17:36:18 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git
for you to fetch changes up to 0e68a3694d1f33c69be7d1cec5a4261aa1d3d01d:
ARMv8/ls1043ardb: Integrate FSL PPA (2016-07-19 11:34:26 -0700)
----------------------------------------------------------------
Hou Zhiqiang (6):
armv8: fsl-layerscape: add i/d-cache enable function to enable_caches
ARMv8: add the secure monitor firmware framework
ARMv8/layerscape: Add FSL PPA support
ARMv8/Layerscape: switch SMP method accordingly
ARMv8/PSCI: Fixup the device tree for PSCI
ARMv8/ls1043ardb: Integrate FSL PPA
York Sun (6):
armv8: Move secure_ram variable out of generic global data
armv8: Add tlb_allocated to arch global data
armv8: mmu: house cleaning
armv8: mmu: split block if necessary
armv8: mmu: Add support of non-identical mapping
armv8: layerscape: Convert to use common MMU framework
README | 3 +-
arch/arm/cpu/armv7/virt-dt.c | 63 ----
arch/arm/cpu/armv8/Makefile | 2 +
arch/arm/cpu/armv8/cache_v8.c | 112 +++----
arch/arm/cpu/armv8/cpu-dt.c | 31 ++
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 396
+++++--------------------
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 33 +++
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 48 +++
arch/arm/cpu/armv8/s32v234/cpu.c | 12 +-
arch/arm/cpu/armv8/sec_firmware.c | 270 +++++++++++++++++
arch/arm/cpu/armv8/sec_firmware_asm.S | 53 ++++
arch/arm/cpu/armv8/zynqmp/cpu.c | 21 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 310 +++++++++++--------
arch/arm/include/asm/arch-fsl-layerscape/ppa.h | 16 +
arch/arm/include/asm/armv8/mmu.h | 5 +-
arch/arm/include/asm/armv8/sec_firmware.h | 22 ++
arch/arm/include/asm/global_data.h | 15 +
arch/arm/include/asm/psci.h | 1 +
arch/arm/lib/Makefile | 2 +
arch/arm/lib/bootm-fdt.c | 2 +-
arch/arm/lib/psci-dt.c | 123 ++++++++
arch/arm/mach-exynos/mmu-arm64.c | 9 +-
arch/arm/mach-meson/board.c | 6 +-
arch/arm/mach-snapdragon/sysmap-apq8016.c | 6 +-
arch/arm/mach-sunxi/board.c | 6 +-
arch/arm/mach-tegra/arm64-mmu.c | 6 +-
arch/arm/mach-uniphier/arm64/mem_map.c | 6 +-
board/armltd/vexpress64/vexpress64.c | 6 +-
board/cavium/thunderx/thunderx.c | 9 +-
board/freescale/ls1043aqds/ddr.c | 15 +-
board/freescale/ls1043ardb/ddr.c | 15 +-
board/freescale/ls1043ardb/ls1043ardb.c | 8 +-
board/freescale/ls2080a/ddr.c | 15 +-
board/freescale/ls2080aqds/ddr.c | 15 +-
board/freescale/ls2080ardb/ddr.c | 15 +-
board/hisilicon/hikey/hikey.c | 6 +-
board/raspberrypi/rpi/rpi.c | 6 +-
cmd/bdinfo.c | 4 +-
common/board_f.c | 11 +-
include/asm-generic/global_data.h | 14 -
include/configs/ls1043ardb.h | 11 +
42 files changed, 1084 insertions(+), 646 deletions(-)
create mode 100644 arch/arm/cpu/armv8/cpu-dt.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ppa.c
create mode 100644 arch/arm/cpu/armv8/sec_firmware.c
create mode 100644 arch/arm/cpu/armv8/sec_firmware_asm.S
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/ppa.h
create mode 100644 arch/arm/include/asm/armv8/sec_firmware.h
create mode 100644 arch/arm/lib/psci-dt.c
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-07-19 20:29 york sun
@ 2016-07-20 2:22 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-07-20 2:22 UTC (permalink / raw)
To: u-boot
On Tue, Jul 19, 2016 at 08:29:53PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 3a592a1349ac3961b0f4f2db0a8d9f128225d897:
>
> Revert "armv8: Enable CPUECTLR.SMPEN for coherency" (2016-07-14
> 17:36:18 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git
>
> for you to fetch changes up to 0e68a3694d1f33c69be7d1cec5a4261aa1d3d01d:
>
> ARMv8/ls1043ardb: Integrate FSL PPA (2016-07-19 11:34:26 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160719/4423aafb/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-06-10 22:18 York Sun
2016-06-19 14:03 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2016-06-10 22:18 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80:
siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to a646f6698173ef4ff34c414f91541b4b8f014de1:
armv8: ls2080aqds: Enable QSPI boot support (2016-06-10 13:45:01 -0700)
----------------------------------------------------------------
Pratiyush Mohan Srivastava (1):
board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment
Yuan Yao (10):
drivers: i2c: mxc: Add early init
armv8: ls2080aqds: Select QSPI CLK div via SCFG
configs: ls2080a_common: Remove duplicate NOR configs
armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable
configs: ls2080aqds: Enable QSPI flash support
dts: ls2080aqds: Add QSPI dts node
armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot
configs: ls2080a: Increase load image len in NAND boot
configs: ls2080aqds_nand_defconfig: Enable QSPI
armv8: ls2080aqds: Enable QSPI boot support
Yunhui Cui (1):
armv8/ls2080a: configure PMU's PCTBENR to enable WDT
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 12 ++++++
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 | 29 +++++++++++++
arch/arm/dts/fsl-ls2080a-qds.dts | 14 +++++++
arch/arm/dts/fsl-ls2080a.dtsi | 10 +++++
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 ++
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 ++
board/freescale/ls2080aqds/eth.c | 5 +++
board/freescale/ls2080aqds/ls2080aqds.c | 19 +++++++++
board/freescale/ls2080ardb/eth_ls2080rdb.c | 5 +++
configs/ls2080aqds_nand_defconfig | 9 ++++
configs/ls2080aqds_qspi_defconfig | 37 +++++++++++++++++
drivers/i2c/i2c_core.c | 5 +++
drivers/i2c/mxc_i2c.c | 27 ++++++++++++
include/configs/ls2080a_common.h | 11 ++---
include/configs/ls2080a_simu.h | 7 ++++
include/configs/ls2080aqds.h | 43 +++++++++++++++++++-
include/i2c.h | 3 ++
17 files changed, 234 insertions(+), 10 deletions(-)
create mode 100644 configs/ls2080aqds_qspi_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-06-10 22:18 York Sun
@ 2016-06-19 14:03 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-06-19 14:03 UTC (permalink / raw)
To: u-boot
On Fri, Jun 10, 2016 at 03:18:02PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 6b3943f1b04be60f147ee540fbd72c4c7ea89f80:
>
> siemens,am33x: add draco etamin board (2016-06-09 13:53:13 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to a646f6698173ef4ff34c414f91541b4b8f014de1:
>
> armv8: ls2080aqds: Enable QSPI boot support (2016-06-10 13:45:01 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160619/a355d01d/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-05-24 17:28 York Sun
2016-05-24 23:18 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2016-05-24 17:28 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:
Prepare v2016.05 (2016-05-16 10:40:32 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to bc323b3fa7cbf1008f02d342c0505231961b5fa6:
armv8: ls1043ardb: enable scsi command and pcie to sata converter (2016-05-18
08:52:42 -0700)
----------------------------------------------------------------
Alex Porosanu (4):
armv8/fdt: add fixup_crypto_node
arch/arm: add SEC JR0 offset
arch/arm, arch/powerpc: add # of SEC engines on the SOC
crypto/fsl: add support for multiple SEC engines initialization
Alison Wang (2):
armv8: fsl-layerscape: Remove unnecessary flushing dcache
arm: ls1021a: Enable CONFIG_OF_LIBFDT and CONFIG_FIT in defconfig
Aneesh Bansal (1):
armv8: ls2080: enable sec_init in U-Boot
Po Liu (1):
armv8: ls1043ardb: enable scsi command and pcie to sata converter
Prabhakar Kushwaha (2):
armv8: ls2080a: Update MAINTAINERS file
armv8: ls2080a: update eth prime
Qianyu Gong (7):
armv8/ls1043ardb: fix the limitation of using 'cpld reset'
armv8: ls1043a: copy kernel from QSPI when booting with QSPI enabled
armv8: ls1043a: remove redundant code in board files
armv8: ls1043ardb: fix types of variables
armv8: fsl-layerscape: spl: remove duplicate init_early_memctl_regs()
armv8: fsl-layerscape: spl: fix the macro name of MMC mode
armv7: ls102xa: spl: fix the macro name of MMC mode
Shaohui Xie (1):
armv8: ls1043ardb: invert irq pin polarity for AQR105 PHY
Shengzhou Liu (5):
armv8/ls1043: Add workaround for DDR erratum A-008850
drivers/ddr/fsl: update workaround for erratum A-008511
driver/ddr/fsl: Add workaround for erratum A-009801
armv8/ls2080ardb: Update DDR timing to support more UDIMMs
driver/ddr/fsl: Add workaround for erratum A-010165
Vincent Siles (2):
arm: Fix SCFG ICID reg addresses
arm: uniform usage of u32 in ls102x caam config
Yuan Yao (5):
spi: fsl_qspi: Fix issues on arm64
spi: fsl_qspi: Assign AMBA mem according CS num in dts
spi: fsl_qspi: Enable Spansion S25FS-S family flashes
sf: Disable 4-KB erase command for SPANSION S25FS-S family
armv8/ls1043a: update the node for QSPI support
arch/arm/cpu/armv7/ls102xa/spl.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 3 -
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 19 ++
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 36 +++
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 5 +-
arch/arm/dts/fsl-ls1043a.dtsi | 5 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 5 +
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 9 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 8 +-
arch/arm/include/asm/arch-ls102xa/config.h | 2 +
arch/arm/include/asm/arch-mx6/imx-regs.h | 9 +-
arch/arm/include/asm/arch-mx7/imx-regs.h | 11 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 9 +
arch/powerpc/include/asm/config_mpc85xx.h | 6 +
board/freescale/c29xpcie/c29xpcie.c | 2 +-
board/freescale/common/ls102xa_stream_id.c | 6 +-
board/freescale/ls1043aqds/ddr.c | 1 +
board/freescale/ls1043aqds/ddr.h | 2 +
board/freescale/ls1043aqds/ls1043aqds.c | 12 -
board/freescale/ls1043ardb/cpld.c | 26 +-
board/freescale/ls1043ardb/cpld.h | 1 +
board/freescale/ls1043ardb/ddr.c | 2 +
board/freescale/ls1043ardb/ddr.h | 3 +
board/freescale/ls1043ardb/ls1043ardb.c | 21 +-
board/freescale/ls2080aqds/MAINTAINERS | 2 +-
board/freescale/ls2080ardb/MAINTAINERS | 2 +-
board/freescale/ls2080ardb/ddr.h | 6 +-
configs/ls1021aqds_ddr4_nor_defconfig | 3 +
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 3 +
configs/ls1021aqds_nand_defconfig | 2 +
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 2 +
configs/ls1021aqds_nor_defconfig | 3 +
configs/ls1021aqds_nor_lpuart_defconfig | 3 +
configs/ls1021aqds_qspi_defconfig | 3 +
configs/ls1021aqds_sdcard_ifc_defconfig | 3 +
configs/ls1021aqds_sdcard_qspi_defconfig | 3 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 2 +
configs/ls1021atwr_nor_defconfig | 3 +
configs/ls1021atwr_nor_lpuart_defconfig | 3 +
configs/ls1021atwr_qspi_defconfig | 3 +
configs/ls1021atwr_sdcard_ifc_defconfig | 2 +
configs/ls1021atwr_sdcard_qspi_defconfig | 3 +
drivers/crypto/fsl/jr.c | 271 +++++++++++---------
drivers/crypto/fsl/jr.h | 3 +
drivers/ddr/fsl/fsl_ddr_gen4.c | 27 +-
drivers/mtd/spi/sf_internal.h | 5 +
drivers/mtd/spi/spi_flash.c | 72 ++++++
drivers/spi/fsl_qspi.c | 159 +++++++++---
include/configs/ls1043a_common.h | 5 +
include/configs/ls1043ardb.h | 22 ++
include/configs/ls2080a_common.h | 8 +
include/configs/ls2080aqds.h | 2 +-
include/configs/ls2080ardb.h | 2 +-
include/fsl_ddr_sdram.h | 11 +
include/fsl_sec.h | 6 +-
55 files changed, 631 insertions(+), 218 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-05-24 17:28 York Sun
@ 2016-05-24 23:18 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-05-24 23:18 UTC (permalink / raw)
To: u-boot
On Tue, May 24, 2016 at 10:28:07AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit aeaec0e682f45b9e0c62c522fafea353931f73ed:
>
> Prepare v2016.05 (2016-05-16 10:40:32 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to bc323b3fa7cbf1008f02d342c0505231961b5fa6:
>
> armv8: ls1043ardb: enable scsi command and pcie to sata converter (2016-05-18
> 08:52:42 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160524/de32233f/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-04-06 17:35 York Sun
2016-04-08 19:44 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2016-04-06 17:35 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 4ed6ed3c27a069a00c8a557d606a05276cc4653e:
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze (2016-04-04
14:34:09 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 3c1d218a1d3048fb576677c47eab43049d0b7778:
armv8: LS2080A: Consolidate LS2080A and LS2085A (2016-04-06 10:26:46 -0700)
----------------------------------------------------------------
Codrin Ciubotariu (2):
drivers: net: vsc9953: Do not configure disabled ports
drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only
Ed Swarthout (1):
armv8: LSCH2 early and final mmu needs matching NS attribute
Peng Fan (2):
fsl: esdhc: support driver model
fsl: esdhc: consolidate fsl_esdhc_cfg structure
Qianyu Gong (2):
armv8: ls1043a: load Fman ucode from NAND flash under NAND boot
armv8: ls1043a: load Fman ucode from SD/MMC under SD boot
Shaohui Xie (1):
armv8: ls1043aqds: make sure fixed-link property is big endian
Vincent Siles (1):
arm: ls102xa: Fix order of CSU indexes in ns_access.h
Wenbin Song (1):
armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1
York Sun (1):
armv8: LS2080A: Consolidate LS2080A and LS2085A
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 4 -
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 9 +-
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 6 +-
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 26 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 4 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 9 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 14 +-
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 +
arch/arm/include/asm/arch-ls102xa/ns_access.h | 6 +-
arch/arm/include/asm/fsl_secure_boot.h | 12 +-
board/freescale/ls1043aqds/eth.c | 12 +-
board/freescale/ls2080a/MAINTAINERS | 2 -
board/freescale/ls2080a/ddr.c | 27 ++-
board/freescale/ls2080a/ls2080a.c | 2 +-
board/freescale/ls2080aqds/MAINTAINERS | 3 -
board/freescale/ls2080aqds/ddr.c | 27 ++-
board/freescale/ls2080aqds/ls2080aqds.c | 2 +-
board/freescale/ls2080ardb/MAINTAINERS | 3 -
board/freescale/ls2080ardb/ddr.c | 27 ++-
board/freescale/ls2080ardb/ls2080ardb.c | 2 +-
configs/ls2085a_emu_defconfig | 20 --
configs/ls2085a_simu_defconfig | 21 --
configs/ls2085aqds_SECURE_BOOT_defconfig | 20 --
configs/ls2085aqds_defconfig | 19 --
configs/ls2085aqds_nand_defconfig | 14 --
configs/ls2085ardb_SECURE_BOOT_defconfig | 20 --
configs/ls2085ardb_defconfig | 19 --
configs/ls2085ardb_nand_defconfig | 14 --
doc/device-tree-bindings/serial/8250.txt | 2 +-
drivers/crypto/fsl/jr.c | 6 +-
drivers/mmc/fsl_esdhc.c | 253 ++++++++++++++++----
drivers/net/fsl-mc/mc.c | 10 +
drivers/net/ldpaa_eth/Makefile | 1 -
drivers/net/vsc9953.c | 14 +-
include/configs/ls1043a_common.h | 14 +-
include/configs/ls1043aqds.h | 2 +-
include/configs/ls2080a_common.h | 7 +-
include/configs/ls2080a_emu.h | 7 -
include/configs/ls2080a_simu.h | 7 -
include/fsl_esdhc.h | 6 +-
include/linux/usb/xhci-fsl.h | 2 +-
43 files changed, 369 insertions(+), 313 deletions(-)
delete mode 100644 configs/ls2085a_emu_defconfig
delete mode 100644 configs/ls2085a_simu_defconfig
delete mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig
delete mode 100644 configs/ls2085aqds_defconfig
delete mode 100644 configs/ls2085aqds_nand_defconfig
delete mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig
delete mode 100644 configs/ls2085ardb_defconfig
delete mode 100644 configs/ls2085ardb_nand_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-04-06 17:35 York Sun
@ 2016-04-08 19:44 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-04-08 19:44 UTC (permalink / raw)
To: u-boot
On Wed, Apr 06, 2016 at 10:35:25AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 4ed6ed3c27a069a00c8a557d606a05276cc4653e:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze (2016-04-04
> 14:34:09 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 3c1d218a1d3048fb576677c47eab43049d0b7778:
>
> armv8: LS2080A: Consolidate LS2080A and LS2085A (2016-04-06 10:26:46 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160408/929a84e1/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-03-29 16:06 York Sun
2016-03-29 22:06 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2016-03-29 16:06 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 0764f24ae6bc937e358990c357f7452b4d5351e3:
net: Move CONFIG_RTL8169 to Kconfig (2016-03-22 12:19:53 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to ed2530d0963196a7175058ed9b5e6cbc29822f7f:
armv8/ls2080ardb: Enable VID support (2016-03-29 08:46:24 -0700)
----------------------------------------------------------------
Mingkai Hu (2):
armv8: fsl-layerscape: Fix LS1043A SVR register
armv8: fsl-layerscape: Add LS1023A SVR
Prabhakar Kushwaha (2):
driver: net: fsl-mc: Free dflt_dpio pointer after its usage
driver: net: fsl-mc: Check NULL before pointer dereference
Qianyu Gong (3):
armv8/ls1043a: Update env settings for booting kernel
armv8: fsl-layerscape: Skip reconfigure QSPI clock when booting from QSPI
armv8/ls1043aqds: dts: Set SPI mode for DSPI
Rai Harninder (1):
armv8/ls2080ardb: Enable VID support
Saksham Jain (14):
armv8: ls2080: Add SFP Configs for LS2080
armv8: ls2080: Add configs for SEC, SecMon, SRK and DCFG
armv8: fsl-lsch3: Add new header for secure boot
armv8: ls2080rdb: ls2080qds: Add secure boot support
armv8: ls2080: Add bootscript header addr for secure boot
armv8: fsl-lsch3: Copy Bootscript and header from NOR to DDR
armv8: ls2080: Change env variable "fdt_high"
armv8: ls2080: Add config for endianess of CCSR GUR
armv8: fsl-lsch3: Disable SMMU during secure boot
crypto/fsl: Correct 64-bit write when MMU disabled
crypto/fsl: Make CAAM transactions cacheable
SECURE_BOOT: Use default bootargs
SECURE BOOT: Halt execution when secure boot fail
SECURE BOOT: Change fsl_secboot_validate func to pass image addr
Stuart Yoder (1):
armv8: ls2080a: Update fdt path for fsl-mc node
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 20 +++++-
arch/arm/dts/fsl-ls1043a-qds.dtsi | 8 ++-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 18 ++++++
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 1 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 32 ++++++++++
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 3 +-
arch/arm/include/asm/fsl_secure_boot.h | 50 +++++++++++++--
board/freescale/common/cmd_esbc_validate.c | 14 +++-
board/freescale/common/fsl_validate.c | 66 ++++++++++++++-----
board/freescale/common/vid.c | 15 ++++-
board/freescale/ls2080a/ls2080a.c | 6 +-
board/freescale/ls2080aqds/MAINTAINERS | 6 ++
board/freescale/ls2080aqds/ls2080aqds.c | 9 ++-
board/freescale/ls2080ardb/MAINTAINERS | 6 ++
board/freescale/ls2080ardb/ls2080ardb.c | 18 +++++-
configs/ls2080aqds_SECURE_BOOT_defconfig | 20 ++++++
configs/ls2080ardb_SECURE_BOOT_defconfig | 20 ++++++
configs/ls2085aqds_SECURE_BOOT_defconfig | 20 ++++++
configs/ls2085ardb_SECURE_BOOT_defconfig | 20 ++++++
drivers/crypto/fsl/desc_constr.h | 7 +-
drivers/crypto/fsl/jr.c | 13 ++++
drivers/crypto/fsl/jr.h | 3 +
drivers/net/fsl-mc/dpio/qbman_sys.h | 2 +-
drivers/net/fsl-mc/mc.c | 2 +-
include/config_fsl_chain_trust.h | 25 +++++---
include/configs/ls1043a_common.h | 8 +--
include/configs/ls2080aqds.h | 2 +
include/configs/ls2080ardb.h | 18 ++++++
include/fsl_secboot_err.h | 3 +
include/fsl_sfp.h | 3 +-
include/fsl_validate.h | 67 +++++++++++++++++---
31 files changed, 440 insertions(+), 65 deletions(-)
create mode 100644 configs/ls2080aqds_SECURE_BOOT_defconfig
create mode 100644 configs/ls2080ardb_SECURE_BOOT_defconfig
create mode 100644 configs/ls2085aqds_SECURE_BOOT_defconfig
create mode 100644 configs/ls2085ardb_SECURE_BOOT_defconfig
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-03-29 16:06 York Sun
@ 2016-03-29 22:06 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-03-29 22:06 UTC (permalink / raw)
To: u-boot
On Tue, Mar 29, 2016 at 09:06:20AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 0764f24ae6bc937e358990c357f7452b4d5351e3:
>
> net: Move CONFIG_RTL8169 to Kconfig (2016-03-22 12:19:53 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to ed2530d0963196a7175058ed9b5e6cbc29822f7f:
>
> armv8/ls2080ardb: Enable VID support (2016-03-29 08:46:24 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160329/f74c0cfd/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-03-22 15:52 york sun
2016-03-23 1:58 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-03-22 15:52 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit f23baa572f96e1e13d7f1a3c8addb61b5d0dbd29:
cmd_dhry.c: Use lldiv for vax_mips calculation as well (2016-03-17 10:14:25 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 6dedcedd6442295428ea7f02b0d30739499858a2:
driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0 (2016-03-21
12:42:15 -0700)
----------------------------------------------------------------
Alexander Graf (1):
arm64: Fix layerscape mmu setup
Alison Wang (2):
arm: ls102xa: fdt: Update FSL_QSPI_COMPAT and FSL_DSPI_COMPAT
arm: ls102xa: Enable CONFIG_SYS_CONSOLE_IS_IN_ENV support
Aneesh Bansal (3):
drivers/crypto/fsl: correct error checking in run_descriptor
drivers/crypto/fsl: add constructs for protocol descriptors
drivers/crypto/fsl: define structures for PDB
Prabhakar Kushwaha (4):
armv8: lsch3: Enable WUO config for RNI-20 node
driver: net: ldpaa_eth: Add support of PHY framework
armv8: ls2085a: Remove phy configuration from QDS and RDB
driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0
Pratiyush Srivastava (1):
armv8: fsl-layerscape: Updating entries in Serdes Table
Shaohui Xie (1):
armv8: ls2080ardb: invert irq pins polarity for AQR405 PHY
Shengzhou Liu (2):
driver/ddr/fsl: Add address parity support for DDR4 UDIMM/discrete
driver/ddr/fsl: Add workaround for erratum A-009803
Stuart Yoder (5):
armv8: ls2080a: remove obsolete stream ID partitioning support
armv8: ls2080a: update stream ID partitioning info
pci: make pci_get_hose_head() available to external users
pci/layerscape: add defines for LUT
pci/layerscape: set LUT and msi-map for discovered PCI devices
Wenbin Song (3):
freescale: vid: Return i2c mux to default channel
armv8/ls1043aqds: Return i2c mux to default chennel
armv8/ls1043aqds: Enable ID_EEPROM support for ls1043aqds
Yangbo Lu (1):
armv8/fsl-lsch2: fix sdhc clock frequency value
York Sun (1):
boards: ls2080: Fix default bootargs
arch/arm/cpu/armv8/cache_v8.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 5 +
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 113 ----------
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 4 +
arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 8 +
arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c | 14 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 3 +
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 8 +
.../asm/arch-fsl-layerscape/ls2080a_stream_id.h | 55 +++--
arch/arm/include/asm/arch-ls102xa/config.h | 4 +-
arch/arm/lib/ccn504.S | 21 ++
board/freescale/common/vid.c | 12 +-
board/freescale/ls1043aqds/ls1043aqds.c | 6 +-
board/freescale/ls2080aqds/eth.c | 25 ---
board/freescale/ls2080ardb/eth_ls2080rdb.c | 39 ----
board/freescale/ls2080ardb/ls2080ardb.c | 4 +
doc/README.fsl-ddr | 9 +
drivers/crypto/fsl/desc.h | 80 ++++++++
drivers/crypto/fsl/desc_constr.h | 27 +++
drivers/crypto/fsl/jr.c | 2 +-
drivers/ddr/fsl/ctrl_regs.c | 55 ++++-
drivers/ddr/fsl/fsl_ddr_gen4.c | 44 +++-
drivers/ddr/fsl/options.c | 15 +-
drivers/net/fsl-mc/mc.c | 3 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 121 ++++++++---
drivers/pci/pcie_layerscape.c | 217 +++++++++++++-------
include/configs/ls1021aqds.h | 1 +
include/configs/ls1021atwr.h | 1 +
include/configs/ls1043aqds.h | 10 +
include/configs/ls2080a_common.h | 2 +-
include/configs/ls2080ardb.h | 3 +-
include/fsl_ddr_sdram.h | 11 +-
include/pci.h | 1 +
33 files changed, 591 insertions(+), 334 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-03-22 15:52 york sun
@ 2016-03-23 1:58 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-03-23 1:58 UTC (permalink / raw)
To: u-boot
On Tue, Mar 22, 2016 at 03:52:25PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit f23baa572f96e1e13d7f1a3c8addb61b5d0dbd29:
>
> cmd_dhry.c: Use lldiv for vax_mips calculation as well (2016-03-17 10:14:25 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 6dedcedd6442295428ea7f02b0d30739499858a2:
>
> driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0 (2016-03-21
> 12:42:15 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160322/29d68a59/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-02-24 17:02 york sun
2016-02-25 15:22 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-02-24 17:02 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 595af9db2422fa5ae734cfe615415b17a5098f34:
Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-02-21 07:56:16
-0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to a08b1921b4a477abe1ac4482fae9ec4bcb3cd27e:
armv7: ls102xa: Move smmu and stream id initialization into the common soc
code (2016-02-24 08:51:15 -0800)
----------------------------------------------------------------
Alison Wang (2):
arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS board
armv7: ls102xa: Move smmu and stream id initialization into the common soc
code
Aneesh Bansal (1):
powerpc/SECURE_BOOT: Add PAMU driver
Ashish Kumar (1):
armv8: ls2080a: Increase default hugepage count
Mingkai Hu (1):
armv8/ls1043a: Implement workaround for erratum A009660
Prabhakar Kushwaha (2):
armv8: ls2080: Add mcinitcmd env variable in default env
armv8: ls2080: Update bootcmd env variable
Qianyu Gong (5):
qe: move drivers/qe/qe.h to include/fsl_qe.h
fm: fdt: Move fman ucode fixup to driver code
driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platforms
armv8/fsl-layerscape: fdt: add fixup for Fman ucode
armv8/ls1043aqds: Add USB support for ls1043aqds
Ruchika Gupta (1):
drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZE
Shengzhou Liu (1):
armv8/ls1043a: enable workaround for errarum A009942
York Sun (2):
arm: ls1021aqds: Convert to driver model and enable serial support
arm: ls1021aqds: Enable driver model lpuart serial driver
Zhao Qiang (4):
driver: qe: Mask the codes not used for micro QE
board: ls1043ardb: Add micro QE support for ls1043ardb
board: ls1043rdb: Move USB muxing config to config_board_mux
board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLC
arch/arm/cpu/armv7/ls102xa/soc.c | 48 +++
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 7 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 19 +
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/ls1021a-qds-duart.dts | 16 +
arch/arm/dts/ls1021a-qds-lpuart.dts | 16 +
arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} | 3 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 2 +
arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h | 2 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 20 +-
arch/powerpc/cpu/mpc85xx/fdt.c | 125 +-----
arch/powerpc/cpu/mpc8xxx/Makefile | 1 +
arch/powerpc/cpu/mpc8xxx/fsl_pamu.c | 433 ++++++++++++++++++++
arch/powerpc/cpu/mpc8xxx/pamu_table.c | 55 +++
arch/powerpc/include/asm/fsl_pamu.h | 169 ++++++++
arch/powerpc/include/asm/immap_85xx.h | 19 +-
board/freescale/common/arm_sleep.c | 2 +-
board/freescale/common/mpc85xx_sleep.c | 2 +-
board/freescale/ls1021aqds/MAINTAINERS | 3 +-
board/freescale/ls1021aqds/ls1021aqds.c | 48 +--
.../{ls102xa_rcw_sd.cfg => ls102xa_rcw_sd_ifc.cfg} | 0
board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg | 14 +
board/freescale/ls1021atwr/ls1021atwr.c | 45 +-
board/freescale/ls1043aqds/ls1043aqds.c | 15 +
board/freescale/ls1043ardb/ls1043ardb.c | 71 +++-
configs/ls1021aqds_ddr4_nor_defconfig | 4 +
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 +
configs/ls1021aqds_nor_defconfig | 4 +
configs/ls1021aqds_nor_lpuart_defconfig | 4 +
configs/ls1021aqds_qspi_defconfig | 2 +-
...d_defconfig => ls1021aqds_sdcard_ifc_defconfig} | 3 +
configs/ls1021aqds_sdcard_qspi_defconfig | 16 +
drivers/crypto/fsl/jr.c | 51 ++-
drivers/crypto/fsl/jr.h | 2 +
drivers/net/fm/Makefile | 1 +
drivers/net/fm/fdt.c | 129 ++++++
drivers/net/fm/fm.c | 2 +-
drivers/qe/fdt.c | 2 +-
drivers/qe/qe.c | 14 +-
drivers/qe/uccf.c | 2 +-
drivers/qe/uccf.h | 2 +-
drivers/qe/uec.c | 2 +-
drivers/qe/uec.h | 2 +-
drivers/qe/uec_phy.c | 2 +-
include/configs/ls1021aqds.h | 23 +-
include/configs/ls1043aqds.h | 13 +
include/configs/ls1043ardb.h | 7 +
include/configs/ls2080a_common.h | 11 +-
include/configs/ls2080aqds.h | 4 +-
include/configs/ls2080ardb.h | 6 +-
include/fsl_fman.h | 1 +
drivers/qe/qe.h => include/fsl_qe.h | 0
52 files changed, 1177 insertions(+), 274 deletions(-)
create mode 100644 arch/arm/dts/ls1021a-qds-duart.dts
create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
rename arch/arm/dts/{ls1021a-qds.dts => ls1021a-qds.dtsi} (98%)
create mode 100644 arch/powerpc/cpu/mpc8xxx/fsl_pamu.c
create mode 100644 arch/powerpc/cpu/mpc8xxx/pamu_table.c
create mode 100644 arch/powerpc/include/asm/fsl_pamu.h
rename board/freescale/ls1021aqds/{ls102xa_rcw_sd.cfg =>
ls102xa_rcw_sd_ifc.cfg} (100%)
create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
rename configs/{ls1021aqds_sdcard_defconfig => ls1021aqds_sdcard_ifc_defconfig}
(71%)
create mode 100644 configs/ls1021aqds_sdcard_qspi_defconfig
create mode 100644 drivers/net/fm/fdt.c
rename drivers/qe/qe.h => include/fsl_qe.h (100%)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-02-24 17:02 york sun
@ 2016-02-25 15:22 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-02-25 15:22 UTC (permalink / raw)
To: u-boot
On Wed, Feb 24, 2016 at 05:02:52PM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 595af9db2422fa5ae734cfe615415b17a5098f34:
>
> Merge branch 'master' of git://www.denx.de/git/u-boot-imx (2016-02-21 07:56:16
> -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to a08b1921b4a477abe1ac4482fae9ec4bcb3cd27e:
>
> armv7: ls102xa: Move smmu and stream id initialization into the common soc
> code (2016-02-24 08:51:15 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160225/c4c270bf/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2016-02-02 2:41 york sun
2016-02-02 15:49 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: york sun @ 2016-02-02 2:41 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 8cdae1dacde7dbe74d53a8ac1a05761a53c4f191:
video: Correct 'tor' typo in comment (2016-01-30 10:58:47 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 7711cc0a0648e215571b1d1768381963d92a1d97:
arm8: ls2080: Move the core errata defines out of board specific file
(2016-02-01 13:59:55 -0800)
----------------------------------------------------------------
Alison Wang (1):
armv7: ls102xa: Increase the supported kernel size
Ashish kumar (2):
armv8: ls2080a: Implement workaround for core errata 829520, 833471
arm8: ls2080: Move the core errata defines out of board specific file
Prabhakar Kushwaha (3):
board: ls2085aqds: Update kernel_size env variable
driver: net: fsl-mc: Memset dprc_cfg before configuring
driver: net: fsl-mc: Update print to reflect correct string
Qianyu Gong (1):
armv8/ls1043aqds: fix DSPI/QSPI node in dts file
arch/arm/cpu/armv8/start.S | 19 +++++++++
arch/arm/dts/fsl-ls1043a-qds.dtsi | 46 +++++++++++++++++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 6 +++
drivers/net/fsl-mc/mc.c | 3 +-
include/configs/ls1021aqds.h | 1 +
include/configs/ls1021atwr.h | 1 +
include/configs/ls2080a_common.h | 3 --
include/configs/ls2080aqds.h | 2 +-
8 files changed, 76 insertions(+), 5 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2016-02-02 2:41 york sun
@ 2016-02-02 15:49 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2016-02-02 15:49 UTC (permalink / raw)
To: u-boot
On Tue, Feb 02, 2016 at 02:41:09AM +0000, york sun wrote:
> Tom,
>
> The following changes since commit 8cdae1dacde7dbe74d53a8ac1a05761a53c4f191:
>
> video: Correct 'tor' typo in comment (2016-01-30 10:58:47 +0100)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 7711cc0a0648e215571b1d1768381963d92a1d97:
>
> arm8: ls2080: Move the core errata defines out of board specific file
> (2016-02-01 13:59:55 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160202/1aab7ca7/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-12-17 6:42 York Sun
2015-12-18 0:28 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-12-17 6:42 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 52bc7c7e2b31d6ba8d394f3d22b551abfa365363:
eeprom: fix eeprom write procedure (2015-12-16 10:31:31 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to ea1332ceb4698b199387b517e640705f93263161:
net: fm: disables unused FM1-DTSEC1 MAC node in DTS (2015-12-17 08:52:19 +0800)
----------------------------------------------------------------
Mingkai Hu (5):
armv8/ls1043a: remove print info
armv8/fsl_lsch2: fix DCSR_DCFG address
armv8/ls1043a: Implement workaround for PEX erratum A009929
armv8/ls1043ardb/rcw: change core frequency to 1600MHz
armv8/ls1043aqds/rcw: change core frequency to 1600MHz
Shaohui Xie (1):
net: fm: disables unused FM1-DTSEC1 MAC node in DTS
Stuart Yoder (1):
driver: net: fsl-mc: remove MC firmware version check
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 16 ++++++++++++++++
arch/arm/include/asm/arch-fsl-layerscape/config.h | 1 +
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 3 ++-
board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg | 4 ++--
.../freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg | 4 ++--
board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg | 4 ++--
board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg | 4 ++--
drivers/net/fm/init.c | 4 ++++
drivers/net/fm/ls1043.c | 9 +--------
drivers/net/fsl-mc/mc.c | 13 -------------
10 files changed, 32 insertions(+), 30 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-17 6:42 York Sun
@ 2015-12-18 0:28 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-12-18 0:28 UTC (permalink / raw)
To: u-boot
On Thu, Dec 17, 2015 at 02:42:56PM +0800, York Sun wrote:
> Tom,
>
> The following changes since commit 52bc7c7e2b31d6ba8d394f3d22b551abfa365363:
>
> eeprom: fix eeprom write procedure (2015-12-16 10:31:31 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to ea1332ceb4698b199387b517e640705f93263161:
>
> net: fm: disables unused FM1-DTSEC1 MAC node in DTS (2015-12-17 08:52:19 +0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151217/981a5609/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-12-15 1:16 York Sun
2015-12-15 23:29 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-12-15 1:16 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 5076c64a08d2083af5a7761b12a30116ef0da967:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-12-11 15:07:44 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 989c5f0a8f8694ac92eb0d6cff8745ae8659364f:
armv8: Add sata support on Layerscape ARMv8 board (2015-12-15 08:57:35 +0800)
----------------------------------------------------------------
Alexander Stein (1):
fsl_qspi: Pet the watchdog while reading/writing
Aneesh Bansal (5):
armv8: define usec2ticks function
armv8: Make SEC read/write as snoopable for LS1043
include/linux: move typdef for uintptr_t
armv8/ls1043ardb: add SECURE BOOT target for NOR
drivers/crypto/fsl: fix endianness issue in RNG
Pratiyush Mohan Srivastava (1):
Enable console log from earlyconsole in Linux bootargs
Shaohui Xie (2):
freescale: fman: make sure phy-handle property is big endian
armv8/ls1043ardb: Add support for >2GB memory
Shengzhou Liu (3):
arm: ls102x: add get_svr and IS_SVR_REV helper
fsl/errata: move fsl_errata.h to common directory
fsl/ddr: updated ddr errata-A008378 for arm and power SoCs
Tang Yuantian (1):
armv8: Add sata support on Layerscape ARMv8 board
Tom Rini (2):
fsl_*_serdes.c: Modify memset call in serdes_init
qbman_portal.c: Update BUG_ON() call in qbman_swp_mc_submit
Yao Yuan (5):
arm: ls1021a: merge SoC specific code in a separate file
arm: ls102xa: enable all the snoop signal for masters.
armv7: ls102xa: cci-400: Enable snoop and DVM message requests.
armv7/fsl-ls102xa: Workaround for DDR erratum A008514
move erratum a008336 and a008514 to soc specific file
York Sun (11):
driver/ddr/fsl: Update DDR4 RTT values
driver/ddr/fsl: Update DDR4 MR6 for Vref range
driver/ddr/fsl: Update MR5 RTT park
driver/ddr/fsl: Update workaround for A008511 for vref range
driver/ddr/fsl: Update timing config for heavy load
armv8/ls2080aqds: Update DDR settings for four chip-select case
armv8/ls2080ardb: Update DDR settings for four chip-select case
Reserve secure memory
armv8: fsl-layerscape: Make DDR non secure in MMU tables
common: Rewrite hiding the end of memory
armv8: fsl-layerscale: Rewrite reserving memory for MC and debug server
README | 14 +-
arch/arm/cpu/armv7/ls102xa/Makefile | 1 +
arch/arm/cpu/armv7/ls102xa/cpu.c | 8 +
arch/arm/cpu/armv7/ls102xa/soc.c | 90 ++++++++
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 142 ++++++++++--
.../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 2 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 85 +++++++
arch/arm/cpu/armv8/generic_timer.c | 11 +
arch/arm/include/asm/arch-fsl-layerscape/config.h | 14 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 14 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 2 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 +
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 31 +++
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 13 +-
arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h | 12 +
arch/arm/include/asm/fsl_secure_boot.h | 6 +-
arch/powerpc/cpu/mpc85xx/cmd_errata.c | 2 +-
arch/powerpc/cpu/mpc85xx/cpu_init.c | 2 +-
arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c | 4 +-
arch/powerpc/include/asm/config_mpc85xx.h | 2 +
board/freescale/common/fman.c | 2 +
board/freescale/common/fsl_validate.c | 34 ++-
board/freescale/ls1021aqds/ls1021aqds.c | 49 +---
board/freescale/ls1021atwr/ls1021atwr.c | 42 +---
board/freescale/ls1043aqds/ddr.c | 9 +
board/freescale/ls1043ardb/MAINTAINERS | 5 +
board/freescale/ls1043ardb/ddr.c | 24 +-
board/freescale/ls1043ardb/ls1043ardb.c | 28 ++-
board/freescale/ls2080a/ddr.c | 15 ++
board/freescale/ls2080a/ls2080a.c | 17 --
board/freescale/ls2080aqds/ddr.c | 31 ++-
board/freescale/ls2080aqds/ls2080aqds.c | 17 --
board/freescale/ls2080ardb/ddr.c | 31 ++-
board/freescale/ls2080ardb/ls2080ardb.c | 17 --
common/board_f.c | 32 ++-
common/cmd_bdinfo.c | 6 +
common/cmd_blob.c | 6 +-
configs/ls1043ardb_SECURE_BOOT_defconfig | 9 +
drivers/crypto/fsl/jr.c | 8 +-
drivers/ddr/fsl/ctrl_regs.c | 48 +++-
drivers/ddr/fsl/fsl_ddr_gen4.c | 65 ++----
drivers/ddr/fsl/options.c | 237 +++++++++++++++++++-
drivers/net/fsl-mc/dpio/qbman_portal.c | 2 +-
drivers/spi/fsl_qspi.c | 5 +
include/asm-generic/global_data.h | 14 ++
include/compiler.h | 3 -
include/configs/ls1043a_common.h | 1 +
include/configs/ls1043aqds.h | 17 ++
include/configs/ls1043ardb.h | 12 +-
include/configs/ls2080a_common.h | 11 +-
include/configs/ls2080aqds.h | 18 ++
include/configs/ls2080ardb.h | 20 +-
include/fsl_ddr_sdram.h | 9 +
{arch/powerpc/include/asm => include}/fsl_errata.h | 47 +++-
include/fsl_validate.h | 9 +-
include/linux/types.h | 1 +
57 files changed, 1079 insertions(+), 283 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/soc.c
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_soc.h
create mode 100644 configs/ls1043ardb_SECURE_BOOT_defconfig
rename {arch/powerpc/include/asm => include}/fsl_errata.h (57%)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-15 1:16 York Sun
@ 2015-12-15 23:29 ` Tom Rini
2015-12-16 1:40 ` York Sun
0 siblings, 1 reply; 147+ messages in thread
From: Tom Rini @ 2015-12-15 23:29 UTC (permalink / raw)
To: u-boot
On Tue, Dec 15, 2015 at 09:16:27AM +0800, York Sun wrote:
> Tom,
>
> The following changes since commit 5076c64a08d2083af5a7761b12a30116ef0da967:
>
> Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-12-11 15:07:44 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 989c5f0a8f8694ac92eb0d6cff8745ae8659364f:
>
> armv8: Add sata support on Layerscape ARMv8 board (2015-12-15 08:57:35 +0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151215/225e0ff7/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-15 23:29 ` Tom Rini
@ 2015-12-16 1:40 ` York Sun
2015-12-16 1:48 ` York Sun
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-12-16 1:40 UTC (permalink / raw)
To: u-boot
Tom,
Please hold on pushing to repository. I did my test on powerpc and arm SoCs and
all passed. But my local build just failed on uintptr_t. I am tracing it now.
York
On 12/16/2015 07:29 AM, Tom Rini wrote:
> On Tue, Dec 15, 2015 at 09:16:27AM +0800, York Sun wrote:
>
>> Tom,
>>
>> The following changes since commit 5076c64a08d2083af5a7761b12a30116ef0da967:
>>
>> Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-12-11 15:07:44 -0500)
>>
>> are available in the git repository at:
>>
>>
>> git://git.denx.de/u-boot-fsl-qoriq.git master
>>
>> for you to fetch changes up to 989c5f0a8f8694ac92eb0d6cff8745ae8659364f:
>>
>> armv8: Add sata support on Layerscape ARMv8 board (2015-12-15 08:57:35 +0800)
>>
>
> Applied to u-boot/master, thanks!
>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-16 1:40 ` York Sun
@ 2015-12-16 1:48 ` York Sun
2015-12-16 1:59 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-12-16 1:48 UTC (permalink / raw)
To: u-boot
Tom,
This issue is caused by 32-bit host has uintptr_t defined in
/usr/include/stdint.h as "unsigned int".
I am working on a solution. In the meantime, how do we deal with this PR?
York
On 12/16/2015 09:40 AM, York Sun wrote:
> Tom,
>
> Please hold on pushing to repository. I did my test on powerpc and arm SoCs and
> all passed. But my local build just failed on uintptr_t. I am tracing it now.
>
> York
>
>
> On 12/16/2015 07:29 AM, Tom Rini wrote:
>> On Tue, Dec 15, 2015 at 09:16:27AM +0800, York Sun wrote:
>>
>>> Tom,
>>>
>>> The following changes since commit 5076c64a08d2083af5a7761b12a30116ef0da967:
>>>
>>> Merge branch 'master' of git://git.denx.de/u-boot-spi (2015-12-11 15:07:44 -0500)
>>>
>>> are available in the git repository at:
>>>
>>>
>>> git://git.denx.de/u-boot-fsl-qoriq.git master
>>>
>>> for you to fetch changes up to 989c5f0a8f8694ac92eb0d6cff8745ae8659364f:
>>>
>>> armv8: Add sata support on Layerscape ARMv8 board (2015-12-15 08:57:35 +0800)
>>>
>>
>> Applied to u-boot/master, thanks!
>>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-16 1:48 ` York Sun
@ 2015-12-16 1:59 ` Tom Rini
2015-12-16 2:01 ` York Sun
0 siblings, 1 reply; 147+ messages in thread
From: Tom Rini @ 2015-12-16 1:59 UTC (permalink / raw)
To: u-boot
On Wed, Dec 16, 2015 at 09:48:59AM +0800, York Sun wrote:
> Tom,
>
> This issue is caused by 32-bit host has uintptr_t defined in
> /usr/include/stdint.h as "unsigned int".
>
> I am working on a solution. In the meantime, how do we deal with this PR?
And then what fails... sandbox?
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151215/40bae78f/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-16 1:59 ` Tom Rini
@ 2015-12-16 2:01 ` York Sun
2015-12-16 2:14 ` York Sun
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-12-16 2:01 UTC (permalink / raw)
To: u-boot
On 12/16/2015 09:59 AM, Tom Rini wrote:
> On Wed, Dec 16, 2015 at 09:48:59AM +0800, York Sun wrote:
>
>> Tom,
>>
>> This issue is caused by 32-bit host has uintptr_t defined in
>> /usr/include/stdint.h as "unsigned int".
>>
>> I am working on a solution. In the meantime, how do we deal with this PR?
>
> And then what fails... sandbox?
>
Not only. When I compile powerpc targets on a 32-bit host, all fail, due to
stdint.h has a different typedef.
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-12-16 2:01 ` York Sun
@ 2015-12-16 2:14 ` York Sun
0 siblings, 0 replies; 147+ messages in thread
From: York Sun @ 2015-12-16 2:14 UTC (permalink / raw)
To: u-boot
On 12/16/2015 10:01 AM, York Sun wrote:
>
>
> On 12/16/2015 09:59 AM, Tom Rini wrote:
>> On Wed, Dec 16, 2015 at 09:48:59AM +0800, York Sun wrote:
>>
>>> Tom,
>>>
>>> This issue is caused by 32-bit host has uintptr_t defined in
>>> /usr/include/stdint.h as "unsigned int".
>>>
>>> I am working on a solution. In the meantime, how do we deal with this PR?
>>
>> And then what fails... sandbox?
>>
>
> Not only. When I compile powerpc targets on a 32-bit host, all fail, due to
> stdint.h has a different typedef.
>
Tom,
I think the original proposal of moving typedef of uintptr_t from compiler.h to
types.h may be flawed. U-boot builds host tools, which may have different size
than the target. Would it be appropriate to abandon this change, and to include
compiler.h whenever uintptr_t is needed?
York
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-11-30 19:32 York Sun
2015-12-01 1:37 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-11-30 19:32 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit fa8883a1e39a20e72aaa5093af0c80062cb95757:
Merge branch 'master' of git://git.denx.de/u-boot-i2c (2015-11-27 08:41:03 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 3785f57015dbd7582f85fd1c34dcaa26638bf976:
armv8: fsl-layerscape: Fix early MMU table for nand boot (2015-11-30 09:11:13
-0800)
----------------------------------------------------------------
Alison Wang (5):
arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bit
arm: ls1021a: Ensure Generic Timer disabled before jumping into the OS
armv8/layerscape: Update MMU table with execute-never bits
arm: ls102xa: Update fdt_high and initrd_high for LS1021AQDS board
armv8: ls2080a: Define CONFIG_ENV_OVERWRITE to overwrite serial and ethaddr
Gong Qianyu (5):
armv8/fsl-layerscape: Remove reference to gdata
armv8/ls1043ardb: dts: add dtb support
armv8/ls1043aqds: dts: add dtb support
armv8/ls1043ardb: add DSPI support
armv8/ls1043ardb: add USB support
Mingkai Hu (1):
pci/layerscape: add support for LS1043A PCIe LUT register access
Prabhakar Kushwaha (15):
armv8: lsch3: Fix lane protocol parsing logic
driver: net: fsl-mc: Add create, destroy APIs in flibs
driver: net: fsl-mc: Add APIs for DPMAC objects in FLIB
armv8: ls2085aqds: Print function name during SerDes error
driver: ldpaa: Add api to return linked PHY ID of DPMAC
driver: net: fsl-mc: Increase MC command timeout
driver: net: fsl-mc: Add DPAA2 commands to manage MC
driver: net: fsl-mc: Create DPAA2 object at run-time
driver: net: ldpaa: Use DPMAC as net device
driver: net: ldpaa: Add debug information
driver: net: ldpaa: Fix Rx buffer alignment
armv8: LS2080A: Rename LS2085A to reflect LS2080A
armv8: ls2085a: Add support of LS2085A SoC
board/ls2080qds: Fix typo in README for QSGMII riser card
armv8: ls2085a: Add workaround of errata A009635
Shaohui Xie (2):
armv8/ls1043aqds: add LS1043AQDS board support
net: phy: added aquantia PHY AQR405 support
York Sun (4):
drivers/ddr/fsl: Enable detection of one DDR controller operation for LSCH3
drivers/ddr/fsl: Fix typo in BIST test for DDR4
armv8: fsl-layerscape: Fix "cpu release" command
armv8: fsl-layerscape: Fix early MMU table for nand boot
README | 3 +
arch/arm/Kconfig | 53 +-
arch/arm/cpu/armv7/ls102xa/cpu.c | 10 +
arch/arm/cpu/armv7/ls102xa/timer.c | 3 +-
arch/arm/cpu/armv8/cache_v8.c | 4 +-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 10 +-
arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 | 85 ++-
arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 10 +-
arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 2 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 25 +-
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c | 11 +
.../{ls2085a_serdes.c => ls2080a_serdes.c} | 5 +
arch/arm/cpu/armv8/fsl-layerscape/mp.c | 6 +
arch/arm/cpu/armv8/fsl-layerscape/soc.c | 45 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 6 +-
arch/arm/dts/Makefile | 6 +-
arch/arm/dts/fsl-ls1043a-qds.dts | 124 +++
arch/arm/dts/fsl-ls1043a-rdb.dts | 103 +++
arch/arm/dts/fsl-ls1043a.dtsi | 186 +++++
.../{fsl-ls2085a-qds.dts => fsl-ls2080a-qds.dts} | 8 +-
.../{fsl-ls2085a-rdb.dts => fsl-ls2080a-rdb.dts} | 8 +-
.../arm/dts/{fsl-ls2085a.dtsi => fsl-ls2080a.dtsi} | 4 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 26 +-
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 87 ++-
arch/arm/include/asm/arch-fsl-layerscape/fdt.h | 1 +
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +-
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 10 +-
.../include/asm/arch-fsl-layerscape/immap_lsch3.h | 10 +-
.../{ls2085a_stream_id.h => ls2080a_stream_id.h} | 4 +-
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 11 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 +-
arch/arm/include/asm/armv8/mmu.h | 2 +-
arch/arm/include/asm/global_data.h | 2 +-
board/freescale/common/vid.c | 22 +
board/freescale/ls1043aqds/Kconfig | 15 +
board/freescale/ls1043aqds/MAINTAINERS | 9 +
board/freescale/ls1043aqds/Makefile | 9 +
board/freescale/ls1043aqds/README | 96 +++
board/freescale/ls1043aqds/ddr.c | 131 ++++
board/freescale/ls1043aqds/ddr.h | 60 ++
board/freescale/ls1043aqds/eth.c | 492 ++++++++++++
board/freescale/ls1043aqds/ls1043aqds.c | 333 ++++++++
board/freescale/ls1043aqds/ls1043aqds_pbi.cfg | 14 +
board/freescale/ls1043aqds/ls1043aqds_qixis.h | 39 +
board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg | 7 +
.../freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg | 8 +
board/freescale/ls1043ardb/ls1043ardb.c | 16 +
board/freescale/{ls2085a => ls2080a}/Kconfig | 12 +-
board/freescale/ls2080a/MAINTAINERS | 10 +
board/freescale/ls2080a/Makefile | 8 +
board/freescale/{ls2085a => ls2080a}/README | 2 +-
board/freescale/{ls2085a => ls2080a}/ddr.c | 3 +-
board/freescale/{ls2085a => ls2080a}/ddr.h | 0
.../{ls2085a/ls2085a.c => ls2080a/ls2080a.c} | 2 +
board/freescale/{ls2085ardb => ls2080aqds}/Kconfig | 6 +-
board/freescale/ls2080aqds/MAINTAINERS | 10 +
.../freescale/{ls2085aqds => ls2080aqds}/Makefile | 2 +-
board/freescale/{ls2085aqds => ls2080aqds}/README | 18 +-
board/freescale/{ls2085ardb => ls2080aqds}/ddr.c | 5 +-
board/freescale/{ls2085aqds => ls2080aqds}/ddr.h | 0
board/freescale/{ls2085aqds => ls2080aqds}/eth.c | 108 +--
.../ls2085aqds.c => ls2080aqds/ls2080aqds.c} | 9 +-
.../ls2080aqds_qixis.h} | 0
board/freescale/{ls2085aqds => ls2080ardb}/Kconfig | 6 +-
board/freescale/ls2080ardb/MAINTAINERS | 10 +
.../freescale/{ls2085ardb => ls2080ardb}/Makefile | 2 +-
board/freescale/{ls2085ardb => ls2080ardb}/README | 12 +-
board/freescale/{ls2085aqds => ls2080ardb}/ddr.c | 5 +-
board/freescale/{ls2085ardb => ls2080ardb}/ddr.h | 0
.../eth_ls2085rdb.c => ls2080ardb/eth_ls2080rdb.c} | 2 +-
.../ls2085ardb.c => ls2080ardb/ls2080ardb.c} | 9 +-
.../ls2080ardb_qixis.h} | 0
board/freescale/ls2085a/MAINTAINERS | 8 -
board/freescale/ls2085a/Makefile | 8 -
board/freescale/ls2085aqds/MAINTAINERS | 8 -
board/freescale/ls2085ardb/MAINTAINERS | 8 -
configs/ls1043aqds_defconfig | 6 +
configs/ls1043aqds_nand_defconfig | 5 +
configs/ls1043aqds_nor_ddr3_defconfig | 3 +
configs/ls1043aqds_sdcard_ifc_defconfig | 5 +
configs/ls1043ardb_defconfig | 5 +
configs/ls1043ardb_nand_defconfig | 5 +
configs/ls1043ardb_sdcard_defconfig | 5 +
configs/ls2080a_emu_defconfig | 15 +
configs/ls2080a_simu_defconfig | 16 +
configs/ls2080aqds_defconfig | 15 +
configs/ls2080aqds_nand_defconfig | 9 +
configs/ls2080ardb_defconfig | 15 +
configs/ls2080ardb_nand_defconfig | 9 +
configs/ls2085a_emu_defconfig | 4 +-
configs/ls2085a_simu_defconfig | 4 +-
configs/ls2085aqds_defconfig | 6 +-
configs/ls2085aqds_nand_defconfig | 4 +-
configs/ls2085ardb_defconfig | 6 +-
configs/ls2085ardb_nand_defconfig | 4 +-
doc/README.fsl-trustzone-components | 4 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 28 +-
drivers/ddr/fsl/main.c | 1 +
drivers/ddr/fsl/util.c | 40 +
drivers/net/fsl-mc/Makefile | 3 +-
drivers/net/fsl-mc/dpbp.c | 41 +
drivers/net/fsl-mc/dpio/dpio.c | 40 +
drivers/net/fsl-mc/dpmac.c | 222 ++++++
drivers/net/fsl-mc/dpni.c | 40 +
drivers/net/fsl-mc/dprc.c | 46 ++
drivers/net/fsl-mc/mc.c | 800 +++++++++++++++-----
drivers/net/fsl-mc/mc_sys.c | 2 +-
drivers/net/ldpaa_eth/Makefile | 3 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 295 +++++++-
drivers/net/ldpaa_eth/ldpaa_eth.h | 23 +-
drivers/net/ldpaa_eth/ldpaa_wriop.c | 27 +-
drivers/net/ldpaa_eth/{ls2085a.c => ls2080a.c} | 0
drivers/net/phy/aquantia.c | 15 +
drivers/pci/pcie_layerscape.c | 16 +-
include/configs/ls1021aqds.h | 8 +-
include/configs/ls1043aqds.h | 387 ++++++++++
include/configs/ls1043ardb.h | 23 +
.../configs/{ls2085a_common.h => ls2080a_common.h} | 16 +-
include/configs/{ls2085a_emu.h => ls2080a_emu.h} | 11 +-
include/configs/{ls2085a_simu.h => ls2080a_simu.h} | 11 +-
include/configs/{ls2085aqds.h => ls2080aqds.h} | 16 +-
include/configs/{ls2085ardb.h => ls2080ardb.h} | 16 +-
include/fsl-mc/fsl_dpbp.h | 48 ++
include/fsl-mc/fsl_dpio.h | 60 ++
include/fsl-mc/fsl_dpmac.h | 468 ++++++++++++
include/fsl-mc/fsl_dpni.h | 189 +++++
include/fsl-mc/fsl_dprc.h | 84 ++
include/fsl-mc/fsl_mc.h | 10 +-
include/fsl-mc/fsl_mc_private.h | 26 +-
include/fsl-mc/ldpaa_wriop.h | 3 +-
include/fsl_ddr.h | 1 +
include/linux/usb/xhci-fsl.h | 15 +-
132 files changed, 5021 insertions(+), 556 deletions(-)
rename arch/arm/cpu/armv8/fsl-layerscape/{ls2085a_serdes.c => ls2080a_serdes.c}
(96%)
create mode 100644 arch/arm/dts/fsl-ls1043a-qds.dts
create mode 100644 arch/arm/dts/fsl-ls1043a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls1043a.dtsi
rename arch/arm/dts/{fsl-ls2085a-qds.dts => fsl-ls2080a-qds.dts} (80%)
rename arch/arm/dts/{fsl-ls2085a-rdb.dts => fsl-ls2080a-rdb.dts} (67%)
rename arch/arm/dts/{fsl-ls2085a.dtsi => fsl-ls2080a.dtsi} (97%)
rename arch/arm/include/asm/arch-fsl-layerscape/{ls2085a_stream_id.h =>
ls2080a_stream_id.h} (93%)
create mode 100644 board/freescale/ls1043aqds/Kconfig
create mode 100644 board/freescale/ls1043aqds/MAINTAINERS
create mode 100644 board/freescale/ls1043aqds/Makefile
create mode 100644 board/freescale/ls1043aqds/README
create mode 100644 board/freescale/ls1043aqds/ddr.c
create mode 100644 board/freescale/ls1043aqds/ddr.h
create mode 100644 board/freescale/ls1043aqds/eth.c
create mode 100644 board/freescale/ls1043aqds/ls1043aqds.c
create mode 100644 board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
create mode 100644 board/freescale/ls1043aqds/ls1043aqds_qixis.h
create mode 100644 board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
create mode 100644 board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
rename board/freescale/{ls2085a => ls2080a}/Kconfig (66%)
create mode 100644 board/freescale/ls2080a/MAINTAINERS
create mode 100644 board/freescale/ls2080a/Makefile
rename board/freescale/{ls2085a => ls2080a}/README (97%)
rename board/freescale/{ls2085a => ls2080a}/ddr.c (99%)
rename board/freescale/{ls2085a => ls2080a}/ddr.h (100%)
rename board/freescale/{ls2085a/ls2085a.c => ls2080a/ls2080a.c} (98%)
rename board/freescale/{ls2085ardb => ls2080aqds}/Kconfig (67%)
create mode 100644 board/freescale/ls2080aqds/MAINTAINERS
rename board/freescale/{ls2085aqds => ls2080aqds}/Makefile (83%)
rename board/freescale/{ls2085aqds => ls2080aqds}/README (95%)
rename board/freescale/{ls2085ardb => ls2080aqds}/ddr.c (98%)
rename board/freescale/{ls2085aqds => ls2080aqds}/ddr.h (100%)
rename board/freescale/{ls2085aqds => ls2080aqds}/eth.c (86%)
rename board/freescale/{ls2085aqds/ls2085aqds.c => ls2080aqds/ls2080aqds.c} (98%)
rename board/freescale/{ls2085aqds/ls2085aqds_qixis.h =>
ls2080aqds/ls2080aqds_qixis.h} (100%)
rename board/freescale/{ls2085aqds => ls2080ardb}/Kconfig (67%)
create mode 100644 board/freescale/ls2080ardb/MAINTAINERS
rename board/freescale/{ls2085ardb => ls2080ardb}/Makefile (72%)
rename board/freescale/{ls2085ardb => ls2080ardb}/README (94%)
rename board/freescale/{ls2085aqds => ls2080ardb}/ddr.c (98%)
rename board/freescale/{ls2085ardb => ls2080ardb}/ddr.h (100%)
rename board/freescale/{ls2085ardb/eth_ls2085rdb.c =>
ls2080ardb/eth_ls2080rdb.c} (98%)
rename board/freescale/{ls2085ardb/ls2085ardb.c => ls2080ardb/ls2080ardb.c} (97%)
rename board/freescale/{ls2085ardb/ls2085ardb_qixis.h =>
ls2080ardb/ls2080ardb_qixis.h} (100%)
delete mode 100644 board/freescale/ls2085a/MAINTAINERS
delete mode 100644 board/freescale/ls2085a/Makefile
delete mode 100644 board/freescale/ls2085aqds/MAINTAINERS
delete mode 100644 board/freescale/ls2085ardb/MAINTAINERS
create mode 100644 configs/ls1043aqds_defconfig
create mode 100644 configs/ls1043aqds_nand_defconfig
create mode 100644 configs/ls1043aqds_nor_ddr3_defconfig
create mode 100644 configs/ls1043aqds_sdcard_ifc_defconfig
create mode 100644 configs/ls2080a_emu_defconfig
create mode 100644 configs/ls2080a_simu_defconfig
create mode 100644 configs/ls2080aqds_defconfig
create mode 100644 configs/ls2080aqds_nand_defconfig
create mode 100644 configs/ls2080ardb_defconfig
create mode 100644 configs/ls2080ardb_nand_defconfig
create mode 100644 drivers/net/fsl-mc/dpmac.c
rename drivers/net/ldpaa_eth/{ls2085a.c => ls2080a.c} (100%)
create mode 100644 include/configs/ls1043aqds.h
rename include/configs/{ls2085a_common.h => ls2080a_common.h} (97%)
rename include/configs/{ls2085a_emu.h => ls2080a_emu.h} (92%)
rename include/configs/{ls2085a_simu.h => ls2080a_simu.h} (95%)
rename include/configs/{ls2085aqds.h => ls2080aqds.h} (96%)
rename include/configs/{ls2085ardb.h => ls2080ardb.h} (96%)
create mode 100644 include/fsl-mc/fsl_dpmac.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-11-30 19:32 York Sun
@ 2015-12-01 1:37 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-12-01 1:37 UTC (permalink / raw)
To: u-boot
On Mon, Nov 30, 2015 at 11:32:33AM -0800, York Sun wrote:
> Tom,
>
> The following changes since commit fa8883a1e39a20e72aaa5093af0c80062cb95757:
>
> Merge branch 'master' of git://git.denx.de/u-boot-i2c (2015-11-27 08:41:03 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 3785f57015dbd7582f85fd1c34dcaa26638bf976:
>
> armv8: fsl-layerscape: Fix early MMU table for nand boot (2015-11-30 09:11:13
> -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151130/0c3a115d/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-10-30 16:26 York Sun
2015-10-30 19:54 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-10-30 16:26 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 677f970bc62a661690b3431543d5a5d5e682ba70:
common/board_f.c: modify the macro to use get_clocks() more common (2015-10-24
13:50:38 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 7ee52af455c2cec7b674d2159806f7e95da8e6a5:
ls102xa: Adjust some macros for SD boot on LS1021A QDS board (2015-10-30
09:19:48 -0700)
----------------------------------------------------------------
Alison Wang (5):
armv8/fsl-lsch3: fdt: Check the pointer returned from call to a function
may be NULL
arm: ls1021a: Add QSPI or IFC support in SD boot
ls102xa: fdt: Disable IFC in SD boot for QSPI
arm: ls102xa: Set fdt_high and initrd_high to the value of 0xffffffff
ls102xa: Adjust some macros for SD boot on LS1021A QDS board
Aneesh Bansal (4):
Pointers in ESBC header made 32 bit
Data types defined for 64 bit physical address
crypto/fsl: SEC driver cleanup for 64 bit and endianness
SECURE_BOOT: Correct reading of ITS bit
Gong Qianyu (3):
common/board_f.c: change the macro name and remove it for PPC platforms
armv8/ls1043ardb: Add nand boot support
armv8/ls1043ardb: Add sd boot support
Hou Zhiqiang (4):
net/fm: Fix the endian issue to support both endianness platforms
net/fm: Add support for 64-bit platforms
net/fm: Make the return value logic consistent with convention
armv8/ls1043a: Enable secondary cores
Joakim Tjernlund (1):
drivers/ddr/fsl_ddr: Make SR_IE configurable
Mingkai Hu (4):
armv7/ls1021a: move ns_access to common file
armv8/fsl_lsch3: Change arch to fsl-layerscape
armv8/fsl_lsch2: Add fsl_lsch2 SoC
armv8/ls1043ardb: Add LS1043ARDB board support
Prabhakar Kushwaha (2):
driver: net: ldpaa_eth: Set MAC address during interface open
armv8: ls2085a: Add support of random MAC address
Scott Wood (2):
arm/fsl-ls: Add CONFIG_OF_STDOUT_VIA_ALIAS
fdt_support: Don't panic if stdout alias is missing
Shaohui Xie (6):
armv8: ls2085ardb: enable CONFIG_PHY_AQUANTIA
net: fm: bug fix when CONFIG_PHYLIB not defined
net: Move some header files to include/
net/fm: Add QSGMII PCS init
net/fm: fix MDIO controller base on FMAN2
armv8/ls1043a: Add Fman support
Yangbo Lu (1):
armv8/ls1043ardb: esdhc: Add esdhc support for ls1043ardb
Yao Yuan (1):
configs: ls1021atwr: Enable ID EEPROM for SD boot
Zhao Qiang (1):
QE: modify the address of qe ucode
horia.geanta at freescale.com (1):
arm: ls102xa: enable snooping for CAAM transactions
tang yuantian (2):
arm: ls1021a: Add sata support on qds and twr board
arm: ls1021atwr: optimize the deep sleep latency
Makefile | 4 +
arch/arm/Kconfig | 9 +
arch/arm/cpu/armv7/ls102xa/Makefile | 1 +
arch/arm/cpu/armv7/ls102xa/cpu.c | 3 +
arch/arm/cpu/armv7/ls102xa/fdt.c | 2 +-
arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c | 42 ++
arch/arm/cpu/armv8/Makefile | 2 +-
arch/arm/cpu/armv8/fsl-layerscape/Makefile | 30 ++
arch/arm/cpu/armv8/fsl-layerscape/README.lsch2 | 10 +
.../README => fsl-layerscape/README.lsch3} | 2 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.c | 273 +++-------
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.h | 2 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/fdt.c | 25 +-
.../cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c | 117 +++++
.../arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c | 180 +++++++
.../fsl_lsch3_serdes.c | 8 +-
.../speed.c => fsl-layerscape/fsl_lsch3_speed.c} | 12 +-
.../armv8/{fsl-lsch3 => fsl-layerscape}/lowlevel.S | 14 +-
arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c | 86 +++
.../{fsl-lsch3 => fsl-layerscape}/ls2085a_serdes.c | 3 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/mp.c | 30 +-
.../cpu/armv8/{fsl-lsch3 => fsl-layerscape}/soc.c | 42 +-
arch/arm/cpu/armv8/fsl-layerscape/spl.c | 79 +++
arch/arm/cpu/armv8/fsl-lsch3/Makefile | 13 -
arch/arm/cpu/armv8/fsl-lsch3/speed.h | 7 -
.../clock.h | 8 +-
arch/arm/include/asm/arch-fsl-layerscape/config.h | 143 +++++
arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 229 ++++++++
.../{arch-fsl-lsch3 => arch-fsl-layerscape}/fdt.h | 4 +
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 157 ++++++
.../include/asm/arch-fsl-layerscape/immap_lsch2.h | 555 ++++++++++++++++++++
.../immap_lsch3.h | 119 ++++-
.../arm/include/asm/arch-fsl-layerscape/imx-regs.h | 55 ++
.../ls2085a_stream_id.h | 0
arch/arm/include/asm/arch-fsl-layerscape/mmu.h | 10 +
.../asm/arch-fsl-layerscape}/mp.h | 10 +-
.../include/asm/arch-fsl-layerscape/ns_access.h | 158 ++++++
arch/arm/include/asm/arch-fsl-layerscape/soc.h | 53 ++
arch/arm/include/asm/arch-fsl-layerscape/speed.h | 10 +
arch/arm/include/asm/arch-fsl-lsch3/config.h | 185 -------
arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h | 67 ---
arch/arm/include/asm/arch-fsl-lsch3/gpio.h | 9 -
arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h | 13 -
arch/arm/include/asm/arch-fsl-lsch3/soc.h | 28 -
arch/arm/include/asm/arch-ls102xa/config.h | 15 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 25 +
arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h | 11 +
arch/arm/include/asm/arch-ls102xa/ns_access.h | 103 +++-
arch/arm/include/asm/armv8/mmu.h | 1 +
arch/arm/include/asm/config.h | 7 +-
arch/arm/include/asm/io.h | 4 +-
arch/arm/include/asm/types.h | 10 +-
arch/powerpc/include/asm/immap_85xx.h | 2 +-
board/freescale/b4860qds/eth_b4860qds.c | 2 +-
board/freescale/common/Makefile | 2 +-
board/freescale/common/arm_sleep.c | 4 -
board/freescale/common/fman.c | 6 +-
board/freescale/common/fsl_validate.c | 22 +-
board/freescale/common/ns_access.c | 8 +-
board/freescale/corenet_ds/eth_hydra.c | 2 +-
board/freescale/corenet_ds/eth_p4080.c | 2 +-
board/freescale/corenet_ds/eth_superhydra.c | 2 +-
board/freescale/ls1021aqds/ls1021aqds.c | 113 +---
board/freescale/ls1021atwr/MAINTAINERS | 3 +-
board/freescale/ls1021atwr/ls1021atwr.c | 147 ++----
board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 14 -
board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg | 8 +
board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg | 8 +
board/freescale/ls1043ardb/Kconfig | 16 +
board/freescale/ls1043ardb/MAINTAINERS | 7 +
board/freescale/ls1043ardb/Makefile | 10 +
board/freescale/ls1043ardb/README | 87 +++
board/freescale/ls1043ardb/cpld.c | 152 ++++++
board/freescale/ls1043ardb/cpld.h | 45 ++
board/freescale/ls1043ardb/ddr.c | 191 +++++++
board/freescale/ls1043ardb/ddr.h | 45 ++
board/freescale/ls1043ardb/eth.c | 77 +++
board/freescale/ls1043ardb/ls1043ardb.c | 142 +++++
board/freescale/ls1043ardb/ls1043ardb_pbi.cfg | 14 +
board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg | 7 +
board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg | 7 +
board/freescale/ls2085a/Kconfig | 4 +-
board/freescale/ls2085a/ls2085a.c | 2 +-
board/freescale/ls2085aqds/Kconfig | 2 +-
board/freescale/ls2085aqds/eth.c | 1 -
board/freescale/ls2085aqds/ls2085aqds.c | 2 +-
board/freescale/ls2085ardb/Kconfig | 2 +-
board/freescale/ls2085ardb/eth_ls2085rdb.c | 1 -
board/freescale/ls2085ardb/ls2085ardb.c | 2 +-
board/freescale/p1023rdb/p1023rdb.c | 2 +-
board/freescale/p2041rdb/eth.c | 2 +-
board/freescale/t102xqds/eth_t102xqds.c | 2 +-
board/freescale/t102xrdb/eth_t102xrdb.c | 2 +-
board/freescale/t1040qds/eth.c | 2 +-
board/freescale/t104xrdb/eth.c | 2 +-
board/freescale/t208xqds/eth_t208xqds.c | 2 +-
board/freescale/t208xrdb/eth_t208xrdb.c | 2 +-
board/freescale/t4qds/eth.c | 2 +-
board/freescale/t4rdb/eth.c | 2 +-
common/board_f.c | 2 +-
common/fdt_support.c | 11 +-
...d_defconfig => ls1021atwr_sdcard_ifc_defconfig} | 1 -
configs/ls1021atwr_sdcard_qspi_defconfig | 11 +
configs/ls1043ardb_defconfig | 4 +
configs/ls1043ardb_nand_defconfig | 4 +
configs/ls1043ardb_sdcard_defconfig | 4 +
configs/ls2085a_simu_defconfig | 1 +
configs/ls2085aqds_defconfig | 1 +
configs/ls2085aqds_nand_defconfig | 1 +
configs/ls2085ardb_defconfig | 1 +
configs/ls2085ardb_nand_defconfig | 1 +
doc/README.fsl-clk | 6 +
doc/README.fsl-dpaa | 4 +-
drivers/crypto/fsl/desc_constr.h | 26 +
drivers/crypto/fsl/fsl_hash.c | 8 +-
drivers/crypto/fsl/jr.c | 86 ++-
drivers/crypto/fsl/jr.h | 7 +-
drivers/ddr/fsl/ctrl_regs.c | 2 +-
drivers/i2c/mxc_i2c.c | 4 +-
drivers/misc/fsl_debug_server.c | 1 -
drivers/mmc/fsl_esdhc.c | 12 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/dtsec.c | 2 +-
drivers/net/fm/eth.c | 195 ++++---
drivers/net/fm/fm.c | 31 +-
drivers/net/fm/fm.h | 14 +-
drivers/net/fm/init.c | 10 +-
drivers/net/fm/ls1043.c | 119 +++++
drivers/net/fm/tgec.c | 2 +-
drivers/net/fm/tgec_phy.c | 2 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 15 +-
drivers/net/ldpaa_eth/ls2085a.c | 2 -
drivers/pci/pcie_layerscape.c | 4 +-
include/common.h | 6 +
include/configs/BSC9132QDS.h | 1 -
include/configs/MPC8308RDB.h | 1 -
include/configs/MPC837XEMDS.h | 1 -
include/configs/MPC837XERDB.h | 1 -
include/configs/MPC8536DS.h | 1 -
include/configs/MPC8569MDS.h | 1 -
include/configs/P1010RDB.h | 1 -
include/configs/P1022DS.h | 1 -
include/configs/P2041RDB.h | 1 -
include/configs/T102xQDS.h | 1 -
include/configs/T102xRDB.h | 1 -
include/configs/T1040QDS.h | 1 -
include/configs/T104xRDB.h | 1 -
include/configs/T208xQDS.h | 1 -
include/configs/T208xRDB.h | 1 -
include/configs/T4240QDS.h | 1 -
include/configs/T4240RDB.h | 1 -
include/configs/UCP1020.h | 1 -
include/configs/colibri_vf.h | 2 +-
include/configs/controlcenterd.h | 1 -
include/configs/corenet_ds.h | 1 -
include/configs/hrcon.h | 1 -
include/configs/ls1021aqds.h | 11 +-
include/configs/ls1021atwr.h | 36 +-
include/configs/ls1043a_common.h | 255 +++++++++
include/configs/ls1043ardb.h | 271 ++++++++++
include/configs/ls2085a_common.h | 11 +-
include/configs/ls2085aqds.h | 2 +-
include/configs/ls2085ardb.h | 3 +-
include/configs/m53evk.h | 2 +-
include/configs/mx25pdk.h | 2 +-
include/configs/mx35pdk.h | 2 +-
include/configs/mx51evk.h | 2 +-
include/configs/mx53ard.h | 2 +-
include/configs/mx53evk.h | 2 +-
include/configs/mx53loco.h | 2 +-
include/configs/mx53smd.h | 2 +-
include/configs/mx6_common.h | 2 +-
include/configs/mx7_common.h | 1 +
include/configs/p1_p2_rdb_pc.h | 1 -
include/configs/p1_twr.h | 1 -
include/configs/usbarmory.h | 2 +-
include/configs/vf610twr.h | 2 +-
include/configs/woodburn_common.h | 2 +-
include/fm_eth.h | 17 +
include/fsl_csu.h | 34 ++
include/fsl_ddr_sdram.h | 2 +
{arch/powerpc/include/asm => include}/fsl_dtsec.h | 0
include/fsl_esdhc.h | 2 +-
{arch/powerpc/include/asm => include}/fsl_fman.h | 0
include/fsl_sec.h | 6 +-
{arch/powerpc/include/asm => include}/fsl_tgec.h | 0
include/fsl_validate.h | 14 +-
187 files changed, 4390 insertions(+), 1091 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/ls102xa_sata.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/Makefile
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/README.lsch2
rename arch/arm/cpu/armv8/{fsl-lsch3/README => fsl-layerscape/README.lsch3} (99%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.c (59%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/cpu.h (71%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/fdt.c (90%)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/fsl_lsch3_serdes.c (95%)
rename arch/arm/cpu/armv8/{fsl-lsch3/speed.c =>
fsl-layerscape/fsl_lsch3_speed.c} (93%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/lowlevel.S (97%)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1043a_serdes.c
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/ls2085a_serdes.c (97%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/mp.c (83%)
rename arch/arm/cpu/armv8/{fsl-lsch3 => fsl-layerscape}/soc.c (72%)
create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/spl.c
delete mode 100644 arch/arm/cpu/armv8/fsl-lsch3/Makefile
delete mode 100644 arch/arm/cpu/armv8/fsl-lsch3/speed.h
rename arch/arm/include/asm/{arch-fsl-lsch3 => arch-fsl-layerscape}/clock.h (56%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/config.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/cpu.h
rename arch/arm/include/asm/{arch-fsl-lsch3 => arch-fsl-layerscape}/fdt.h (71%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
rename arch/arm/include/asm/{arch-fsl-lsch3 =>
arch-fsl-layerscape}/immap_lsch3.h (58%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/imx-regs.h
rename arch/arm/include/asm/{arch-fsl-lsch3 =>
arch-fsl-layerscape}/ls2085a_stream_id.h (100%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/mmu.h
rename arch/arm/{cpu/armv8/fsl-lsch3 => include/asm/arch-fsl-layerscape}/mp.h (82%)
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/ns_access.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/soc.h
create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/speed.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/config.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/gpio.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/imx-regs.h
delete mode 100644 arch/arm/include/asm/arch-fsl-lsch3/soc.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_sata.h
delete mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd_qspi.cfg
create mode 100644 board/freescale/ls1043ardb/Kconfig
create mode 100644 board/freescale/ls1043ardb/MAINTAINERS
create mode 100644 board/freescale/ls1043ardb/Makefile
create mode 100644 board/freescale/ls1043ardb/README
create mode 100644 board/freescale/ls1043ardb/cpld.c
create mode 100644 board/freescale/ls1043ardb/cpld.h
create mode 100644 board/freescale/ls1043ardb/ddr.c
create mode 100644 board/freescale/ls1043ardb/ddr.h
create mode 100644 board/freescale/ls1043ardb/eth.c
create mode 100644 board/freescale/ls1043ardb/ls1043ardb.c
create mode 100644 board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
create mode 100644 board/freescale/ls1043ardb/ls1043ardb_rcw_nand.cfg
create mode 100644 board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
rename configs/{ls1021atwr_sdcard_defconfig => ls1021atwr_sdcard_ifc_defconfig}
(82%)
create mode 100644 configs/ls1021atwr_sdcard_qspi_defconfig
create mode 100644 configs/ls1043ardb_defconfig
create mode 100644 configs/ls1043ardb_nand_defconfig
create mode 100644 configs/ls1043ardb_sdcard_defconfig
create mode 100644 doc/README.fsl-clk
create mode 100644 drivers/net/fm/ls1043.c
create mode 100644 include/configs/ls1043a_common.h
create mode 100644 include/configs/ls1043ardb.h
create mode 100644 include/fsl_csu.h
rename {arch/powerpc/include/asm => include}/fsl_dtsec.h (100%)
rename {arch/powerpc/include/asm => include}/fsl_fman.h (100%)
rename {arch/powerpc/include/asm => include}/fsl_tgec.h (100%)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-10-30 16:26 York Sun
@ 2015-10-30 19:54 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-10-30 19:54 UTC (permalink / raw)
To: u-boot
On Fri, Oct 30, 2015 at 09:26:50AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 677f970bc62a661690b3431543d5a5d5e682ba70:
>
> common/board_f.c: modify the macro to use get_clocks() more common (2015-10-24
> 13:50:38 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 7ee52af455c2cec7b674d2159806f7e95da8e6a5:
>
> ls102xa: Adjust some macros for SD boot on LS1021A QDS board (2015-10-30
> 09:19:48 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20151030/5143cf1c/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-09-02 3:00 York Sun
2015-09-02 21:58 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-09-02 3:00 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit b7e84c93c450480ca4ff51ad2eb56bd83c1dc368:
Merge branch 'master' of http://git.denx.de/u-boot-sunxi (2015-08-31 12:12:27
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 6923b069bd50b3ac519b16b6ae6aabbd2984c391:
pci/layerscape: Setup mmu-masters property for the PCIe (2015-09-01 21:49:27
-0500)
----------------------------------------------------------------
Alison Wang (1):
armv8: fsl-lsch3: Rewrite MMU translation table entries
Aneesh Bansal (1):
SECURE_BOOT: Disable IE Key feature for RAMBOOT
Bhupesh Sharma (1):
armv8: Add framework for CCN-504 interconnect configuration
Claudiu Manoil (1):
ls102xa: etsec: Use proper settings for BE BDs
Prabhakar Kushwaha (7):
armv8: ls2085a: Update bootargs as per default target console
armv8: ls2085a: Add support of CONFIG_CMD_GREPENV
armv8: ls2085a: Update serdes1_cfg_tbl for 0x33 & 0x35 protocol
armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info
net: phy/vitesse: Add support for VSC8584 phy
armv8: ls2085qds: Add support of X-QSGMII-16PORT riser card
driver: misc: debug server: Update Error message
Priyanka Jain (2):
rtc:ds3232/ds3231: Add support to generate 32KHz output
armv8/ls2085aqds: enable 32KHz rtc output
Varun Sethi (1):
pci/layerscape: Setup mmu-masters property for the PCIe
Yangbo Lu (1):
armv8/ls2085a_simu: enable eSDHC
York Sun (1):
armv8/ls2085a_emu: Drop DDR3 emulation target
Zhuoyu Zhang (1):
arm/ls102xa:add hwconfig setting to support disable unused devices
arch/arm/cpu/armv8/cache_v8.c | 17 +-
arch/arm/cpu/armv8/fsl-lsch3/README | 71 +++
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 474 +++++++++++++-------
arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c | 33 +-
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 72 ++-
arch/arm/cpu/armv8/fsl-lsch3/ls2085a_serdes.c | 6 +-
arch/arm/include/asm/arch-fsl-lsch3/config.h | 12 +
arch/arm/include/asm/arch-ls102xa/config.h | 14 -
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 +-
arch/arm/include/asm/arch-ls102xa/ls102xa_devdis.h | 52 +++
arch/arm/include/asm/armv8/mmu.h | 8 +-
arch/arm/include/asm/fsl_secure_boot.h | 22 +
arch/arm/lib/Makefile | 1 +
arch/arm/lib/ccn504.S | 61 +++
arch/powerpc/include/asm/fsl_secure_boot.h | 6 +-
board/freescale/ls1021aqds/ls1021aqds.c | 8 +-
board/freescale/ls1021atwr/ls1021atwr.c | 8 +-
board/freescale/ls2085a/MAINTAINERS | 1 -
board/freescale/ls2085aqds/README | 81 ++++
board/freescale/ls2085aqds/eth.c | 466 ++++++++++++++++++-
board/freescale/ls2085aqds/ls2085aqds.c | 2 +
configs/ls2085a_emu_D4_defconfig | 14 -
configs/ls2085a_emu_defconfig | 2 +-
drivers/misc/Makefile | 1 +
drivers/misc/fsl_debug_server.c | 10 +-
drivers/misc/fsl_devdis.c | 29 ++
drivers/net/phy/vitesse.c | 11 +
drivers/net/tsec.c | 6 -
drivers/pci/pcie_layerscape.c | 9 +
drivers/rtc/ds3231.c | 10 +
include/configs/ls1021aqds.h | 4 +-
include/configs/ls1021atwr.h | 4 +-
include/configs/ls2085a_common.h | 5 +-
include/configs/ls2085a_simu.h | 11 +
include/configs/ls2085aqds.h | 17 +
include/configs/ls2085ardb.h | 6 +
include/fsl_devdis.h | 18 +
include/rtc.h | 1 +
38 files changed, 1324 insertions(+), 251 deletions(-)
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_devdis.h
create mode 100644 arch/arm/lib/ccn504.S
delete mode 100644 configs/ls2085a_emu_D4_defconfig
create mode 100644 drivers/misc/fsl_devdis.c
create mode 100644 include/fsl_devdis.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-08-04 16:08 York Sun
2015-08-04 17:50 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-08-04 16:08 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit c109dd0079711cb86ece088e2da4f4d792fc4730:
Prepare v2015.10-rc1 (2015-08-03 10:52:14 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to e16b604ecf5701cc0ab4437bccfd65468035740b:
armv8/ls2085ardb: Add USB support for ls2085ardb (2015-08-03 12:06:39 -0700)
----------------------------------------------------------------
Alex Porosanu (3):
drivers/crypto/fsl: disable RNG oscillator maximum frequency check
drivers/crypto/fsl: change starting entropy delay value
drivers/crypto/fsl: enable raw data instead of von Neumann data
Alison Wang (2):
armv7/ls1021a: allow OCRAM access permission as R/W in SPL
armv7/ls1021a/etsec: Enable Tx Data and TxBD snooping
Minghuan Lian (2):
drivers/pci: Add function to find an extended capability
drivers/pci/layerscape: Add EP mode support
Nikhil Badola (4):
armv8/lsch3/config: Define CONFIG_SYS_CACHELINE_SIZE for LS2085A
armv8/lsch3/config: Define USB XHCI controller base address for LS2085A
armv8/ls2085aqds: Add USB support for ls2085aqds
armv8/ls2085ardb: Add USB support for ls2085ardb
Prabhakar Kushwaha (1):
drivers/fsl-mc: flib changes for mc 8.0.0
Tang Yuantian (1):
armv7/ls1021atwr: added deep sleep support in uboot
Wang Dongsheng (1):
armv7/ls102xa: Fix non-boot cpus cannot correctly fall in spin table
York Sun (1):
drivers/ddr/fsl: Adjust bstopre value
Zhao Qiang (2):
drivers/qe: transform parameter to compatible type
driver/qe: use strncpy instead of strcpy
Zhuoyu Zhang (1):
armv7/ls1021a: Reserve secure code into RAM instead of OCRAM
chenhui zhao (1):
armv7/ls1021atwr: program the regulator for deep sleep
gaurav rana (1):
armv7/lS1021atwr: Enable bootscript for secure boot
horia.geanta at freescale.com (3):
drivers/crypto/fsl: fix "era" property value on LE platforms
drivers/crypto/fsl: fix snooping for write transactions
drivers/crypto/fsl: clean-up - use fdt_setprop_u32 helper
arch/arm/cpu/armv7/ls102xa/cpu.c | 8 +
arch/arm/include/asm/arch-fsl-lsch3/config.h | 4 +
board/freescale/ls1021aqds/ls1021aqds.c | 178 ++++++++--------
board/freescale/ls1021atwr/ls1021atwr.c | 279 ++++++++++++++++++--------
drivers/crypto/fsl/jr.c | 25 ++-
drivers/crypto/fsl/jr.h | 2 +
drivers/crypto/fsl/sec.c | 20 +-
drivers/ddr/fsl/main.c | 2 +-
drivers/ddr/fsl/options.c | 10 +-
drivers/net/fsl-mc/dpbp.c | 38 +++-
drivers/net/fsl-mc/dpio/dpio.c | 38 +++-
drivers/net/fsl-mc/dpmng.c | 7 +-
drivers/net/fsl-mc/dpni.c | 126 ++++++++----
drivers/net/fsl-mc/dprc.c | 70 +++++--
drivers/net/fsl-mc/mc.c | 40 ++--
drivers/net/fsl-mc/mc_sys.c | 2 +-
drivers/net/ldpaa_eth/ldpaa_eth.c | 69 ++++---
drivers/pci/pci.c | 53 +++++
drivers/pci/pcie_layerscape.c | 137 ++++++++++++-
drivers/qe/qe.c | 7 +-
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 13 +-
include/configs/ls2085aqds.h | 13 ++
include/configs/ls2085ardb.h | 13 ++
include/fsl-mc/fsl_dpbp.h | 49 ++++-
include/fsl-mc/fsl_dpio.h | 30 ++-
include/fsl-mc/fsl_dpmng.h | 7 +-
include/fsl-mc/fsl_dpni.h | 115 +++++++++--
include/fsl-mc/fsl_dprc.h | 154 ++++++++++----
include/fsl-mc/fsl_mc_cmd.h | 47 +++--
include/fsl_ddr.h | 2 +-
include/fsl_sec.h | 13 +-
include/pci.h | 41 ++++
include/tsec.h | 4 -
34 files changed, 1185 insertions(+), 432 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-08-04 16:08 York Sun
@ 2015-08-04 17:50 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-08-04 17:50 UTC (permalink / raw)
To: u-boot
On Tue, Aug 04, 2015 at 09:08:19AM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit c109dd0079711cb86ece088e2da4f4d792fc4730:
>
> Prepare v2015.10-rc1 (2015-08-03 10:52:14 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to e16b604ecf5701cc0ab4437bccfd65468035740b:
>
> armv8/ls2085ardb: Add USB support for ls2085ardb (2015-08-03 12:06:39 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150804/1f74a737/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-07-20 21:07 York Sun
2015-07-21 13:50 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-07-20 21:07 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846:
Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to db14f11dfe348550d8c10c6609277488d9f500d6:
armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. (2015-07-20 11:44:40 -0700)
----------------------------------------------------------------
Alison Wang (2):
arm: ls1021a: Remove the inappropriate use of the function 'sprintf'
arm/ls102xa: Add little-endian mode support for audio IPs
Bhupesh Sharma (4):
armv8/ls2085a: Increase the supported kernel size
armv8/ls2085a: Expose all DDR region(s) to Linux
driver/fsl_debug_server: Fix the DDR hide logic for LS2085a
arm/errata: Update required bits for A57 cores erratas
Haikun Wang (7):
arm/dts/ls2085a: Bring in ls2085a dts files from linux kernel
arm/dts/ls2085a: Add DSPI dts node
arm/dts/ls2085a: Add dts files for LS2085AQDS and LS2085ARDB
armv8/ls2085a: Enable DSPI get input clk form 'mxc_get_clock'
armv8/ls2085aqds: DSPI pin muxing configure through QIXIS
armv8/ls2085aqds: Enable DSPI flash support for LS2085AQDS
armv8/ls2085ardb: Enable DSPI flash support for LS2085ARDB
Haikun.Wang at freescale.com (2):
armv8/ls2085ardb: DSPI pin muxing configure through QIXIS CPLD
armv8/ls2085a/defconfig: Enable FSL_DSPI, OF_CONTROL and DM support
J. German Rivera (2):
drivers/fsl-mc: Make MC boot error messages more readable
drivers/fsl-mc: Autoload AOIP image from NOR flash
Jaiprakash Singh (1):
board/fsl/common: Fix eeprom system version endianness
Prabhakar Kushwaha (21):
armv8/ls2085ardb: Add eth & phy firmware loading support
armv8/ls2085aqds: Add support of SerDes protocol 0x49
armv8/ls2085a: Update LS2085a PCIe compatible
armv8/ls2085a: call ft_pcie_setup() to change dts status
armv8/ls2085qds: Update SFP TX bit as "0" to enable XFI
armv8/ls2085rdb: Update PCA9547PW slave address
armv8/ls2085RDB: Update board version print logic
armv8/fsl-ch3: Add support to print SoC personality
armv8/ls2085a: Avoid hard-coding for board name print
armv8/ls2085a: Update SoC README for DDR layout
armv8/fsl-lsch3: Support 256M mem split for MC & dbg-srvr
driver/ldpaa_eth:Flush buffer before seeding BMAN after TX_conf
drivers: fsl-mc: Update flibs to mc-0.6.0.1
drivers: fsl-mc: Update qbman driver
drivers: fsl-mc: Return error for major version mismatch
driver/ldpaa_eth: Retry enqueue if portal was busy
driver/ldpaa_eth: Add timeout handling DQRR entry read
driver/ldpaa_eth: Avoid TX conf frames
driver/ldpaa_eth:Avoid infinite loop in ldpaa_eth_rx
board/ls2085rdb: Export functions for standalone AQ FW load apps
board/ls2085a: Increase kernel_size value in env variable
Priyanka Jain (1):
armv8/ls2085a: Enable "date" command for QDS and RDB
Stuart Yoder (4):
armv8/ls2085a: enable debug server
armv8/fsl-lsch3: partition stream IDs
drivers/fsl-mc: dynamically create ICID pool in DPC
armv8/fsl-lsch3: device tree fixups for PCI stream IDs
Wang Dongsheng (2):
ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S
arm/ls102xa: Add PSCI support for ls102xa
Yangbo Lu (1):
armv8/ls2085ardb: add hwconfig setting for eSDHC
York Sun (3):
armv8/fsl-lsch3: Fix DDR speed message
driver/ddr/fsl: Add a hook to update SPD address
armv8/ls2085ardb: Fix SPD address error on early boards
Zhichun Hua (2):
armv8: Fix TCR macros for shareability attribute
armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup.
README | 15 ++
arch/arm/cpu/armv7/ls102xa/Makefile | 4 +
arch/arm/cpu/armv7/ls102xa/fdt.c | 21 +--
arch/arm/cpu/armv7/ls102xa/psci.S | 126 +++++++++++++++
arch/arm/cpu/armv7/sunxi/psci_sun6i.S | 22 +--
arch/arm/cpu/armv7/sunxi/psci_sun7i.S | 22 +--
arch/arm/cpu/armv8/fsl-lsch3/README | 25 +++
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 64 ++++++--
arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 114 ++++++++++++++
arch/arm/cpu/armv8/fsl-lsch3/speed.c | 2 +
arch/arm/cpu/armv8/start.S | 8 +-
arch/arm/dts/Makefile | 2 +
arch/arm/dts/fsl-ls2085a-qds.dts | 53 +++++++
arch/arm/dts/fsl-ls2085a-rdb.dts | 35 +++++
arch/arm/dts/fsl-ls2085a.dtsi | 129 ++++++++++++++++
arch/arm/include/asm/arch-armv7/generictimer.h | 50 ++++++
arch/arm/include/asm/arch-fsl-lsch3/clock.h | 1 +
arch/arm/include/asm/arch-fsl-lsch3/config.h | 2 +
arch/arm/include/asm/arch-fsl-lsch3/fdt.h | 10 ++
.../include/asm/arch-fsl-lsch3/ls2085a_stream_id.h | 64 ++++++++
arch/arm/include/asm/arch-fsl-lsch3/soc.h | 20 +++
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 3 +-
arch/arm/include/asm/armv8/mmu.h | 4 +-
board/freescale/common/sys_eeprom.c | 8 +-
board/freescale/ls1021aqds/ls1021aqds.c | 3 +
board/freescale/ls1021atwr/ls1021atwr.c | 3 +
board/freescale/ls2085a/README | 11 ++
board/freescale/ls2085a/ls2085a.c | 17 +-
board/freescale/ls2085aqds/README | 19 +++
board/freescale/ls2085aqds/eth.c | 4 +-
board/freescale/ls2085aqds/ls2085aqds.c | 71 ++++++++-
board/freescale/ls2085ardb/Makefile | 2 +-
board/freescale/ls2085ardb/README | 11 ++
board/freescale/ls2085ardb/eth_ls2085rdb.c | 148 ++++++++++++++++++
board/freescale/ls2085ardb/ls2085ardb.c | 111 +++++++++++---
common/exports.c | 7 +
configs/ls2085aqds_defconfig | 7 +
configs/ls2085ardb_defconfig | 7 +
drivers/ddr/fsl/main.c | 8 +
drivers/misc/fsl_debug_server.c | 5 +
drivers/net/fsl-mc/dpio/qbman_portal.c | 66 ++++----
drivers/net/fsl-mc/dpio/qbman_portal.h | 22 ++-
drivers/net/fsl-mc/dpio/qbman_private.h | 2 +-
drivers/net/fsl-mc/dpni.c | 2 +-
drivers/net/fsl-mc/mc.c | 121 +++++++++++----
drivers/net/ldpaa_eth/ldpaa_eth.c | 162 ++++++--------------
drivers/net/ldpaa_eth/ldpaa_eth.h | 1 -
drivers/pci/pcie_layerscape.c | 62 ++++++++
include/_exports.h | 13 ++
include/configs/ls1021aqds.h | 2 +
include/configs/ls1021atwr.h | 2 +
include/configs/ls2085a_common.h | 28 +++-
include/configs/ls2085aqds.h | 17 +-
include/configs/ls2085ardb.h | 49 +++++-
include/exports.h | 13 +-
include/fsl-mc/fsl_dpio.h | 32 ++--
include/fsl-mc/fsl_dpmng.h | 2 +-
include/fsl-mc/fsl_dpni.h | 144 ++++++++++++++---
include/fsl-mc/fsl_dprc.h | 64 ++++++--
include/fsl-mc/fsl_mc.h | 5 +-
include/fsl_ddr.h | 3 +
61 files changed, 1673 insertions(+), 377 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/psci.S
create mode 100644 arch/arm/dts/fsl-ls2085a-qds.dts
create mode 100644 arch/arm/dts/fsl-ls2085a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls2085a.dtsi
create mode 100644 arch/arm/include/asm/arch-armv7/generictimer.h
create mode 100644 arch/arm/include/asm/arch-fsl-lsch3/fdt.h
create mode 100644 arch/arm/include/asm/arch-fsl-lsch3/ls2085a_stream_id.h
create mode 100644 board/freescale/ls2085ardb/eth_ls2085rdb.c
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-07-20 21:07 York Sun
@ 2015-07-21 13:50 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-07-21 13:50 UTC (permalink / raw)
To: u-boot
On Mon, Jul 20, 2015 at 02:07:27PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 605e15db2b54302364a2528d3c6604fbc57be846:
>
> Merge git://git.denx.de/u-boot-x86 (2015-07-15 10:41:20 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to db14f11dfe348550d8c10c6609277488d9f500d6:
>
> armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. (2015-07-20 11:44:40 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150721/400e4a0f/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-05-22 20:55 York Sun
2015-05-23 12:42 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-05-22 20:55 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to a88cc3bd90b05420a84ee360efa1133652dcac5c:
arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.h (2015-05-20 10:34:09 -0700)
----------------------------------------------------------------
Alison Wang (1):
arm: ls102xa: Adjust the load address of U-Boot for NOR boot
York Sun (2):
driver/ddr/fsl: Remove deskew_cntrl register
arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.h
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 146 ---------------------
board/freescale/ls1021atwr/ls1021atwr.c | 1 +
include/configs/ls1021aqds.h | 2 +-
include/configs/ls1021atwr.h | 25 +++-
include/fsl_immap.h | 4 +-
5 files changed, 27 insertions(+), 151 deletions(-)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-05-22 20:55 York Sun
@ 2015-05-23 12:42 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-05-23 12:42 UTC (permalink / raw)
To: u-boot
On Fri, May 22, 2015 at 01:55:37PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit 0e6b7a28243175ae0874d53b6e6e4eff8548d71f:
>
> Merge git://git.denx.de/u-boot-samsung (2015-05-18 09:15:15 -0400)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to a88cc3bd90b05420a84ee360efa1133652dcac5c:
>
> arm/ls1021a: Remove ccsr_ddr from immap_ls102xa.h (2015-05-20 10:34:09 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150523/2cbadd95/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-04-24 2:17 York Sun
2015-04-28 14:50 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-04-24 2:17 UTC (permalink / raw)
To: u-boot
Tom,
I am having trouble cloning git repositories. I hope this pull request was
generated correctly. I saw "fatal: read error: Connection reset by peer" when
creating this pull request.
The following changes since commit d77447fdb122dab290fb1ad184a62456011e6e06:
serial: pl01x: fix PL010 regression (2015-04-21 10:05:42 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to ab10d73d2fc13bd5baf5024e54ad92641d238bdb:
armv8/fsl-lsch3: Implement workaround for I2C erratum A009203 (2015-04-23
16:46:51 -0700)
----------------------------------------------------------------
Alison Wang (2):
arm/ls102xa:Add support of conditional workaround implementation as per
SoC ver
ls102xa: ddr4: Use LPUART as console output to verify DCU driver
Bhupesh Sharma (3):
armv8/fsl-lsch3: Add Freescale Debug Server driver
fsl-ch3/README: Add description for NOR flash layout (firmware images)
armv8/fsl-ch3: Add support to print RCW configuration
J. German Rivera (1):
drivers/fsl-mc: Changed MC firmware loading for new boot architecture
Jaiprakash Singh (1):
driver/ifc: Add 64KB page support
Minghuan Lian (4):
pci/layerscape: remove unnecessary pcie_layerscape.h
pci/layerscape: fix link and class issues to support ls2085a
drivers/net/e1000.c: Cleanup whitespace
armv8: Add SerDes framework for Layerscape Architecture
Nikhil Badola (3):
drivers:usb: Add device-tree fixup to identify socs having dual phy
drivers:usb:fsl: Add affected SOCs for USB Erratum A007792
drivers:usb: Check if USB Erratum A005697 is applicable on BSC913x
Prabhakar Kushwaha (8):
driver/fsl-mc: Add support of MC Flibs
driver/ldpaa_eth: Add LDPAA Ethernet driver
board/ls2085_common: Increase malloc length
driver/fsl_ifc: Add support to finalize CS1, CS3 address binding
armv8/ls2085a: Update common header file
driver/ldpaa_eth: Update ldpaa ethernet driver
driver/ldpaa: Add support of WRIOP static data structure
board/ls2085qds: Add support ethernet
Scott Wood (9):
nand/fsl_ifc: Increase eccstat[] for IFC 2.0
cmd_mem: Store last address/size/etc as ulong
armv8/fsl-lsch3: Set nodes in DVM domain
fsl-lsch3: Introduce place for common early SoC init
armv8/ls2085a: Add workaround for USB erratum A-008751
armv8/fsl-lsch3: Use correct compatible for serial clock fixup
armv8/ls2085aqds: NAND boot support
freescale/qixis: Add support for booting from NAND
armv8/ls2085ardb: Enable NAND SPL support
Shaohui Xie (1):
net/memac_phy: reuse driver for little endian SoCs
Yangbo Lu (1):
ls2085a: esdhc: Add esdhc support for ls2085a
Yao Yuan (1):
ls1021atwr: add hwconfig setting to do pin mux
York Sun (12):
driver/i2c/mxc: Enable I2C bus 3 and 4
drivers/ddr/fsl: Update DDR driver for DDR4
driver/ddr/fsl: Fix driver to support empty first slot
driver/ddr/fsl: Add built-in memory test for DDR4 driver
driver/ddr/fsl: Add workaround for DDR erratum A008511
armv8/fsl-lsch3: Implement workaround for erratum A008585
armv8/fsl-lsch3: Fix platform clock calculation
armv8/ls2085a: Fix generic timer clock source
armv8/fsl-lsch3: Update early MMU table
armv8/ls2085aqds: Add support of LS2085AQDS platform
armv8/ls2085ardb: Add support of LS2085ARDB platform
armv8/fsl-lsch3: Implement workaround for I2C erratum A009203
Zhao Qiang (2):
QE/DeepSleep: add QE deepsleep support for mpc85xx
QE/DeepSleep: add QE deepsleep support for arm
gaurav rana (1):
Add bootscript support to esbc_validate.
pankaj chauhan (2):
armv8/ls2085a: Add support for reset request
net/phy/cortina: Fix compilation warning
README | 13 +
arch/arm/Kconfig | 24 +
arch/arm/cpu/armv7/ls102xa/clock.c | 4 +-
arch/arm/cpu/armv8/fsl-lsch3/Makefile | 2 +
arch/arm/cpu/armv8/fsl-lsch3/README | 138 +++
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 123 ++-
arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 9 +-
arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c | 115 +++
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 15 +
arch/arm/cpu/armv8/fsl-lsch3/ls2085a_serdes.c | 117 +++
arch/arm/cpu/armv8/fsl-lsch3/mp.c | 7 +
arch/arm/cpu/armv8/fsl-lsch3/mp.h | 1 +
arch/arm/cpu/armv8/fsl-lsch3/soc.c | 107 ++
arch/arm/cpu/armv8/fsl-lsch3/speed.c | 11 +-
arch/arm/cpu/armv8/generic_timer.c | 11 +
arch/arm/cpu/armv8/u-boot-spl.lds | 77 ++
arch/arm/include/asm/arch-fsl-lsch3/config.h | 60 +-
arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h | 67 ++
arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h | 29 +
arch/arm/include/asm/arch-fsl-lsch3/soc.h | 8 +
arch/arm/include/asm/arch-ls102xa/config.h | 4 -
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 3 +
arch/arm/include/asm/fsl_secure_boot.h | 25 +
arch/arm/include/asm/pcie_layerscape.h | 13 -
arch/arm/lib/crt0_64.S | 7 +
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 8 +-
arch/powerpc/cpu/mpc85xx/speed.c | 4 +-
arch/powerpc/include/asm/fsl_secure_boot.h | 19 +
board/freescale/bsc9132qds/bsc9132qds.c | 4 +-
board/freescale/c29xpcie/c29xpcie.c | 4 +-
board/freescale/common/arm_sleep.c | 6 +
board/freescale/common/cmd_esbc_validate.c | 16 +
board/freescale/common/mpc85xx_sleep.c | 8 +
board/freescale/common/qixis.c | 31 +-
board/freescale/ls1021aqds/MAINTAINERS | 1 +
board/freescale/ls1021aqds/ls1021aqds.c | 73 +-
board/freescale/ls1021atwr/ls1021atwr.c | 110 ++-
board/freescale/ls2085a/ls2085a.c | 43 +-
board/freescale/ls2085aqds/Kconfig | 16 +
board/freescale/ls2085aqds/MAINTAINERS | 8 +
board/freescale/ls2085aqds/Makefile | 9 +
board/freescale/ls2085aqds/README | 129 +++
board/freescale/ls2085aqds/ddr.c | 196 ++++
board/freescale/ls2085aqds/ddr.h | 92 ++
board/freescale/ls2085aqds/eth.c | 380 +++++++
board/freescale/ls2085aqds/ls2085aqds.c | 274 ++++++
board/freescale/ls2085aqds/ls2085aqds_qixis.h | 30 +
board/freescale/ls2085ardb/Kconfig | 16 +
board/freescale/ls2085ardb/MAINTAINERS | 8 +
board/freescale/ls2085ardb/Makefile | 8 +
board/freescale/ls2085ardb/README | 109 ++
board/freescale/ls2085ardb/ddr.c | 196 ++++
board/freescale/ls2085ardb/ddr.h | 92 ++
board/freescale/ls2085ardb/ls2085ardb.c | 249 +++++
board/freescale/ls2085ardb/ls2085ardb_qixis.h | 20 +
board/freescale/p1010rdb/p1010rdb.c | 5 +-
board/freescale/p1010rdb/spl.c | 4 +-
common/board_r.c | 6 +
common/cmd_mem.c | 6 +-
common/spl/spl.c | 2 +-
common/spl/spl_nand.c | 2 +-
configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 3 +
configs/ls2085aqds_defconfig | 3 +
configs/ls2085aqds_nand_defconfig | 4 +
configs/ls2085ardb_defconfig | 3 +
configs/ls2085ardb_nand_defconfig | 4 +
drivers/ddr/fsl/ctrl_regs.c | 77 +-
drivers/ddr/fsl/ddr4_dimm_params.c | 3 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 169 +++-
drivers/ddr/fsl/interactive.c | 56 +-
drivers/ddr/fsl/lc_common_dimm_params.c | 5 +-
drivers/ddr/fsl/main.c | 2 +-
drivers/ddr/fsl/options.c | 7 +-
drivers/ddr/fsl/util.c | 28 +-
drivers/i2c/mxc_i2c.c | 17 +-
drivers/misc/Makefile | 1 +
drivers/misc/fsl_debug_server.c | 246 +++++
drivers/misc/fsl_ifc.c | 21 +
drivers/mmc/fsl_esdhc.c | 36 +-
drivers/mtd/nand/fsl_ifc_nand.c | 64 +-
drivers/mtd/nand/fsl_ifc_spl.c | 25 +-
drivers/net/Makefile | 2 +
drivers/net/e1000.c | 8 +-
drivers/net/fm/eth.c | 2 +-
drivers/net/fm/memac.c | 2 +-
drivers/net/fm/memac_phy.c | 62 +-
drivers/net/fsl-mc/Makefile | 6 +-
drivers/net/fsl-mc/dpbp.c | 102 ++
drivers/net/fsl-mc/dpio/Makefile | 9 +
drivers/net/fsl-mc/dpio/dpio.c | 102 ++
drivers/net/fsl-mc/dpio/qbman_portal.c | 593 +++++++++++
drivers/net/fsl-mc/dpio/qbman_portal.h | 157 +++
drivers/net/fsl-mc/dpio/qbman_private.h | 169 ++++
drivers/net/fsl-mc/dpio/qbman_sys.h | 290 ++++++
drivers/net/fsl-mc/dpmng.c | 65 +-
drivers/net/fsl-mc/dpni.c | 506 ++++++++++
drivers/net/fsl-mc/dprc.c | 283 ++++++
drivers/net/fsl-mc/fsl_dpmng_cmd.h | 32 +-
drivers/net/fsl-mc/mc.c | 702 ++++++++++---
drivers/net/fsl-mc/mc_sys.c | 6 +-
drivers/net/ldpaa_eth/Makefile | 9 +
drivers/net/ldpaa_eth/ldpaa_eth.c | 710 +++++++++++++
drivers/net/ldpaa_eth/ldpaa_eth.h | 149 +++
drivers/net/ldpaa_eth/ldpaa_wriop.c | 146 +++
drivers/net/ldpaa_eth/ls2085a.c | 83 ++
drivers/net/phy/cortina.c | 4 +-
drivers/net/vsc9953.c | 2 +-
drivers/pci/pcie_layerscape.c | 52 +-
drivers/qe/qe.c | 82 ++
drivers/qe/qe.h | 6 +
drivers/usb/host/ehci-fsl.c | 16 +-
include/config_fsl_secboot.h | 89 ++
include/configs/aristainetos.h | 1 +
include/configs/cm_fx6.h | 1 +
include/configs/embestmx6boards.h | 1 +
include/configs/flea3.h | 1 +
include/configs/gw_ventana.h | 1 +
include/configs/imx31_phycore.h | 1 +
include/configs/ls1021aqds.h | 2 +
include/configs/ls1021atwr.h | 1 +
include/configs/ls2085a_common.h | 242 ++---
include/configs/ls2085a_emu.h | 65 ++
include/configs/ls2085a_simu.h | 122 +++
include/configs/ls2085aqds.h | 359 +++++++
include/configs/ls2085ardb.h | 305 ++++++
include/configs/m53evk.h | 1 +
include/configs/mx35pdk.h | 1 +
include/configs/mx53ard.h | 1 +
include/configs/mx53evk.h | 1 +
include/configs/mx53loco.h | 1 +
include/configs/mx53smd.h | 1 +
include/configs/mx6qsabreauto.h | 1 +
include/configs/mx6sabresd.h | 1 +
include/configs/mx6slevk.h | 1 +
include/configs/mx6sxsabresd.h | 1 +
include/configs/nitrogen6x.h | 1 +
include/configs/novena.h | 1 +
include/configs/ot1200.h | 1 +
include/configs/platinum.h | 1 +
include/configs/tbs2910.h | 1 +
include/configs/titanium.h | 1 +
include/configs/tqma6.h | 1 +
include/configs/wandboard.h | 1 +
include/configs/woodburn_common.h | 1 +
include/fsl-mc/fsl_dpaa_fd.h | 121 +++
include/fsl-mc/fsl_dpbp.h | 143 +++
include/fsl-mc/fsl_dpio.h | 163 +++
include/fsl-mc/fsl_dpmng.h | 113 +--
include/fsl-mc/fsl_dpni.h | 1093 +++++++++++++++++++++
include/fsl-mc/fsl_dprc.h | 659 +++++++++++++
include/fsl-mc/fsl_mc.h | 5 +-
include/fsl-mc/fsl_mc_cmd.h | 17 +-
include/fsl-mc/fsl_mc_private.h | 50 +
include/fsl-mc/fsl_qbman_base.h | 87 ++
include/fsl-mc/fsl_qbman_portal.h | 175 ++++
include/fsl-mc/ldpaa_wriop.h | 70 ++
include/fsl_ddr.h | 4 +-
include/fsl_ddr_sdram.h | 3 +
include/fsl_debug_server.h | 32 +
include/fsl_esdhc.h | 4 +
include/fsl_ifc.h | 84 +-
{arch/powerpc/include/asm => include}/fsl_memac.h | 0
include/fsl_usb.h | 57 +-
include/linux/immap_qe.h | 12 +
164 files changed, 11694 insertions(+), 713 deletions(-)
create mode 100644 arch/arm/cpu/armv8/fsl-lsch3/fsl_lsch3_serdes.c
create mode 100644 arch/arm/cpu/armv8/fsl-lsch3/ls2085a_serdes.c
create mode 100644 arch/arm/cpu/armv8/fsl-lsch3/soc.c
create mode 100644 arch/arm/cpu/armv8/u-boot-spl.lds
create mode 100644 arch/arm/include/asm/arch-fsl-lsch3/fsl_serdes.h
create mode 100644 arch/arm/include/asm/arch-fsl-lsch3/soc.h
create mode 100644 arch/arm/include/asm/fsl_secure_boot.h
delete mode 100644 arch/arm/include/asm/pcie_layerscape.h
create mode 100644 board/freescale/ls2085aqds/Kconfig
create mode 100644 board/freescale/ls2085aqds/MAINTAINERS
create mode 100644 board/freescale/ls2085aqds/Makefile
create mode 100644 board/freescale/ls2085aqds/README
create mode 100644 board/freescale/ls2085aqds/ddr.c
create mode 100644 board/freescale/ls2085aqds/ddr.h
create mode 100644 board/freescale/ls2085aqds/eth.c
create mode 100644 board/freescale/ls2085aqds/ls2085aqds.c
create mode 100644 board/freescale/ls2085aqds/ls2085aqds_qixis.h
create mode 100644 board/freescale/ls2085ardb/Kconfig
create mode 100644 board/freescale/ls2085ardb/MAINTAINERS
create mode 100644 board/freescale/ls2085ardb/Makefile
create mode 100644 board/freescale/ls2085ardb/README
create mode 100644 board/freescale/ls2085ardb/ddr.c
create mode 100644 board/freescale/ls2085ardb/ddr.h
create mode 100644 board/freescale/ls2085ardb/ls2085ardb.c
create mode 100644 board/freescale/ls2085ardb/ls2085ardb_qixis.h
create mode 100644 configs/ls1021aqds_ddr4_nor_lpuart_defconfig
create mode 100644 configs/ls2085aqds_defconfig
create mode 100644 configs/ls2085aqds_nand_defconfig
create mode 100644 configs/ls2085ardb_defconfig
create mode 100644 configs/ls2085ardb_nand_defconfig
create mode 100644 drivers/misc/fsl_debug_server.c
create mode 100644 drivers/net/fsl-mc/dpbp.c
create mode 100644 drivers/net/fsl-mc/dpio/Makefile
create mode 100644 drivers/net/fsl-mc/dpio/dpio.c
create mode 100644 drivers/net/fsl-mc/dpio/qbman_portal.c
create mode 100644 drivers/net/fsl-mc/dpio/qbman_portal.h
create mode 100644 drivers/net/fsl-mc/dpio/qbman_private.h
create mode 100644 drivers/net/fsl-mc/dpio/qbman_sys.h
create mode 100644 drivers/net/fsl-mc/dpni.c
create mode 100644 drivers/net/fsl-mc/dprc.c
create mode 100644 drivers/net/ldpaa_eth/Makefile
create mode 100644 drivers/net/ldpaa_eth/ldpaa_eth.c
create mode 100644 drivers/net/ldpaa_eth/ldpaa_eth.h
create mode 100644 drivers/net/ldpaa_eth/ldpaa_wriop.c
create mode 100644 drivers/net/ldpaa_eth/ls2085a.c
create mode 100644 include/config_fsl_secboot.h
create mode 100644 include/configs/ls2085aqds.h
create mode 100644 include/configs/ls2085ardb.h
create mode 100644 include/fsl-mc/fsl_dpaa_fd.h
create mode 100644 include/fsl-mc/fsl_dpbp.h
create mode 100644 include/fsl-mc/fsl_dpio.h
create mode 100644 include/fsl-mc/fsl_dpni.h
create mode 100644 include/fsl-mc/fsl_dprc.h
create mode 100644 include/fsl-mc/fsl_mc_private.h
create mode 100644 include/fsl-mc/fsl_qbman_base.h
create mode 100644 include/fsl-mc/fsl_qbman_portal.h
create mode 100644 include/fsl-mc/ldpaa_wriop.h
create mode 100644 include/fsl_debug_server.h
rename {arch/powerpc/include/asm => include}/fsl_memac.h (100%)
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-04-24 2:17 York Sun
@ 2015-04-28 14:50 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-04-28 14:50 UTC (permalink / raw)
To: u-boot
On Thu, Apr 23, 2015 at 07:17:51PM -0700, York Sun wrote:
> Tom,
>
> I am having trouble cloning git repositories. I hope this pull request was
> generated correctly. I saw "fatal: read error: Connection reset by peer" when
> creating this pull request.
>
> The following changes since commit d77447fdb122dab290fb1ad184a62456011e6e06:
>
> serial: pl01x: fix PL010 regression (2015-04-21 10:05:42 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to ab10d73d2fc13bd5baf5024e54ad92641d238bdb:
>
> armv8/fsl-lsch3: Implement workaround for I2C erratum A009203 (2015-04-23
> 16:46:51 -0700)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150428/cf95ab02/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2015-02-25 21:29 York Sun
2015-02-26 2:58 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2015-02-25 21:29 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit 38dac81b3d0e777f301ca98100bfbcab01d616c2:
Merge branch 'master' of git://git.denx.de/u-boot-mmc (2015-02-23 16:18:06 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 94e3c8c4fd7bfe395fa467973cd647551d6d98c7:
crypto/fsl - Add progressive hashing support using hardware acceleration.
(2015-02-25 13:20:02 -0800)
----------------------------------------------------------------
Alison Wang (2):
arm: ls102xa: Define default values for some CCSR macros
arm: ls1021x: Add support for initializing CAAM's stream id
Arnab Basu (2):
ARMv8/fsl-lsch3: Patch cpu node properties in DT for online cores
ARMv8/ls2085a: Switch to passing earlycon to kernel
Bhupesh Sharma (3):
fsl-ch3/lowlevel: TZPC and TZASC programming to configure non-secure accesses
armv8/fsl-lsch3: Add fdt-fixup for clock frequency of the DUART nodes
ls2085/configs: Ensure right banners are printed for EMU and SIMU
J. German Rivera (1):
drivers/mc: Migrated MC Flibs to 0.5.2
Kuldip Giroh (1):
ARMv8/LS2085A: HugeTLB support is required by default in LS NADK
Minghuan Lian (4):
arm/ls102xa: create TLB to map PCIe region
arm/ls102xa: use a array to define pexmscportsr
arm/ls1021a: add PCIe settings
driver/pci: add Layerscape PCIe driver
Stuart Yoder (1):
ARMv8/ls2085a: Move kernel image load address
Volodymyr Riazantsev (1):
mmc: fsl_esdhc: Add support for DDR mode
York Sun (15):
armv8/fsl-lsch3: Change normal memory shareability
armv8/fsl-lsch3: Convert flushing L3 to assembly to avoid using stack
armv8/ls2085a: Enable cluster timebase for all clusters
driver/ddr/fsl: Adjust CAS to preamble override for emulator
driver/ddr/fsl: Add workaround for A008336
driver/ddr/fsl: Add workround for erratumn A008514
armv8/fsl-lsch3: Add support for second DDR clock
driver/ddr/fsl: Add support for multiple DDR clocks
ARMv8/LS2085A: Enable auto precharge for DP-DDR
driver/ddr/fsl: Fix a typo in timing_cfg_8 calculation
ARMv8/LS2085A: Adjust system clock and DDR clock
driver/ddr/fsl: Add sync of refresh
armv8/fsl-lsch3: Enable workaround for A008336
armv8/fsl-lsch3: Enable erratum workround for A008514
armv8/ls2085a_emu: Enable sync of refresh
chenhui zhao (1):
arm: ls102xa: workaround for cache coherency problem
gaurav rana (2):
crypto/fsl: Make function names consistent for blob
encapsulation/decapsulation.
crypto/fsl - Add progressive hashing support using hardware acceleration.
Kconfig | 4 +-
README | 23 +-
arch/arm/cpu/armv7/ls102xa/cpu.c | 231 +++++++++-
arch/arm/cpu/armv8/cache.S | 6 +
arch/arm/cpu/armv8/cache_v8.c | 18 +-
arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 62 +--
arch/arm/cpu/armv8/fsl-lsch3/fdt.c | 28 +-
arch/arm/cpu/armv8/fsl-lsch3/lowlevel.S | 132 ++++++
arch/arm/cpu/armv8/fsl-lsch3/mp.c | 8 +
arch/arm/cpu/armv8/fsl-lsch3/mp.h | 1 +
arch/arm/cpu/armv8/fsl-lsch3/speed.c | 16 +-
arch/arm/include/asm/arch-fsl-lsch3/config.h | 38 ++
arch/arm/include/asm/arch-fsl-lsch3/immap_lsch3.h | 3 +
arch/arm/include/asm/arch-ls102xa/config.h | 15 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 40 +-
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 57 +++
arch/arm/include/asm/armv8/mmu.h | 3 +-
arch/arm/include/asm/global_data.h | 3 +
arch/arm/include/asm/system.h | 1 +
arch/arm/lib/bootm.c | 2 +-
board/freescale/common/ls102xa_stream_id.c | 15 +
board/freescale/ls1021aqds/ls1021aqds.c | 21 +
board/freescale/ls1021atwr/ls1021atwr.c | 21 +
board/freescale/ls2085a/ddr.c | 1 +
board/freescale/ls2085a/ls2085a.c | 29 +-
common/cmd_blob.c | 18 +-
common/hash.c | 10 +
doc/README.fsl-trustzone-components | 25 ++
drivers/crypto/fsl/fsl_blob.c | 4 +-
drivers/crypto/fsl/fsl_hash.c | 138 +++++-
drivers/crypto/fsl/fsl_hash.h | 34 ++
drivers/ddr/fsl/arm_ddr_gen3.c | 2 +-
drivers/ddr/fsl/ctrl_regs.c | 216 +++++----
drivers/ddr/fsl/ddr1_dimm_params.c | 18 +-
drivers/ddr/fsl/ddr2_dimm_params.c | 12 +-
drivers/ddr/fsl/ddr3_dimm_params.c | 8 +-
drivers/ddr/fsl/ddr4_dimm_params.c | 8 +-
drivers/ddr/fsl/fsl_ddr_gen4.c | 36 +-
drivers/ddr/fsl/lc_common_dimm_params.c | 27 +-
drivers/ddr/fsl/main.c | 29 +-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 4 +-
drivers/ddr/fsl/options.c | 6 +-
drivers/ddr/fsl/util.c | 67 ++-
drivers/mmc/fsl_esdhc.c | 8 +-
drivers/net/Makefile | 2 +-
drivers/net/{fsl_mc => fsl-mc}/Makefile | 4 +-
drivers/net/fsl-mc/dpmng.c | 91 ++++
drivers/net/fsl-mc/fsl_dpmng_cmd.h | 49 ++
drivers/net/{fsl_mc => fsl-mc}/mc.c | 132 ++++--
drivers/net/fsl-mc/mc_sys.c | 63 +++
drivers/pci/pcie_layerscape.c | 471 +++++++++++++++++++-
include/configs/ls1021aqds.h | 24 +
include/configs/ls1021atwr.h | 24 +
include/configs/ls2085a_common.h | 19 +-
include/configs/ls2085a_emu.h | 4 +
include/configs/ls2085a_simu.h | 3 +
include/configs/mx6_common.h | 2 +
include/fsl-mc/fsl_dpmng.h | 121 +++++
include/{ => fsl-mc}/fsl_mc.h | 0
include/fsl-mc/fsl_mc_cmd.h | 132 ++++++
include/fsl-mc/fsl_mc_sys.h | 26 ++
include/fsl_ddr.h | 17 +-
include/fsl_ddr_dimm_params.h | 2 +-
include/fsl_esdhc.h | 1 +
include/fsl_sec.h | 26 ++
include/hw_sha.h | 41 +-
lib/Kconfig | 36 ++
67 files changed, 2404 insertions(+), 334 deletions(-)
create mode 100644 doc/README.fsl-trustzone-components
create mode 100644 drivers/crypto/fsl/fsl_hash.h
rename drivers/net/{fsl_mc => fsl-mc}/Makefile (75%)
create mode 100644 drivers/net/fsl-mc/dpmng.c
create mode 100644 drivers/net/fsl-mc/fsl_dpmng_cmd.h
rename drivers/net/{fsl_mc => fsl-mc}/mc.c (67%)
create mode 100644 drivers/net/fsl-mc/mc_sys.c
create mode 100644 include/fsl-mc/fsl_dpmng.h
rename include/{ => fsl-mc}/fsl_mc.h (100%)
create mode 100644 include/fsl-mc/fsl_mc_cmd.h
create mode 100644 include/fsl-mc/fsl_mc_sys.h
Thanks.
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2015-02-25 21:29 York Sun
@ 2015-02-26 2:58 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2015-02-26 2:58 UTC (permalink / raw)
To: u-boot
On Wed, Feb 25, 2015 at 01:29:17PM -0800, York Sun wrote:
> Tom,
>
> The following changes since commit 38dac81b3d0e777f301ca98100bfbcab01d616c2:
>
> Merge branch 'master' of git://git.denx.de/u-boot-mmc (2015-02-23 16:18:06 -0500)
>
> are available in the git repository at:
>
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to 94e3c8c4fd7bfe395fa467973cd647551d6d98c7:
>
> crypto/fsl - Add progressive hashing support using hardware acceleration.
> (2015-02-25 13:20:02 -0800)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150225/9fe18b9e/attachment.sig>
^ permalink raw reply [flat|nested] 147+ messages in thread
* [U-Boot] Please pull u-boot-fsl-qoriq master
@ 2014-10-20 21:29 York Sun
2014-10-21 19:55 ` Tom Rini
0 siblings, 1 reply; 147+ messages in thread
From: York Sun @ 2014-10-20 21:29 UTC (permalink / raw)
To: u-boot
Tom,
The following changes since commit c43fd23cf619856b0763a64a6a3bcf3663058c49:
Prepare v2014.10 (2014-10-14 04:47:15 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to ba4740205d22d31da289f5b6b2f8db7d27896f40:
ls102x: Add support for secure boot and enable blob command (2014-10-16
14:21:26 -0700)
----------------------------------------------------------------
Ruchika Gupta (10):
powerpc/P1010RDB:Update RESET_VECTOR_ADDRESS for 768KB u-boot size
fsl_sec : Move SEC CCSR definition to common include
fsl_sec : Change accessor function to take care of endianness
fsl_sec: Add hardware accelerated SHA256 and SHA1
mpc85xx: configs - Add hash command in freescale platforms
ls102x: configs - Add hash command in freescale LS1 platforms
powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot
crypto/fsl: Add command for encapsulating/decapsulating blobs
mpc85xx: configs - Enable blob command in freescale platforms
ls102x: Add support for secure boot and enable blob command
README | 6 +
arch/arm/include/asm/arch-ls102xa/config.h | 4 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 18 +-
arch/powerpc/cpu/mpc85xx/fdt.c | 2 +-
arch/powerpc/cpu/mpc85xx/liodn.c | 4 +-
arch/powerpc/cpu/mpc8xxx/fdt.c | 4 +-
arch/powerpc/include/asm/config_mpc85xx.h | 1 +
arch/powerpc/include/asm/immap_85xx.h | 73 +--
arch/powerpc/include/asm/types.h | 4 +
board/freescale/ls1021aqds/MAINTAINERS | 1 +
board/freescale/ls1021aqds/ls1021aqds.c | 10 +
board/freescale/ls1021atwr/MAINTAINERS | 1 +
board/freescale/ls1021atwr/ls1021atwr.c | 10 +
common/Makefile | 2 +
common/cmd_blob.c | 109 +++++
configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 3 +
configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 3 +
drivers/crypto/Makefile | 1 +
drivers/crypto/fsl/Makefile | 10 +
drivers/crypto/fsl/desc.h | 651 ++++++++++++++++++++++++++
drivers/crypto/fsl/desc_constr.h | 280 +++++++++++
drivers/crypto/fsl/error.c | 258 ++++++++++
drivers/crypto/fsl/fsl_blob.c | 61 +++
drivers/crypto/fsl/fsl_hash.c | 77 +++
drivers/crypto/fsl/jobdesc.c | 125 +++++
drivers/crypto/fsl/jobdesc.h | 29 ++
drivers/crypto/fsl/jr.c | 462 ++++++++++++++++++
drivers/crypto/fsl/jr.h | 97 ++++
include/configs/B4860QDS.h | 11 +
include/configs/BSC9131RDB.h | 7 +
include/configs/BSC9132QDS.h | 11 +
include/configs/C29XPCIE.h | 7 +
include/configs/P1010RDB.h | 13 +-
include/configs/P2041RDB.h | 11 +
include/configs/T1040QDS.h | 8 +
include/configs/T104xRDB.h | 8 +
include/configs/T208xQDS.h | 8 +
include/configs/T208xRDB.h | 8 +
include/configs/T4240QDS.h | 11 +
include/configs/T4240RDB.h | 8 +
include/configs/corenet_ds.h | 11 +
include/configs/ls1021aqds.h | 11 +
include/configs/ls1021atwr.h | 12 +
include/fsl_sec.h | 181 +++++++
44 files changed, 2558 insertions(+), 74 deletions(-)
create mode 100644 common/cmd_blob.c
create mode 100644 configs/ls1021aqds_nor_SECURE_BOOT_defconfig
create mode 100644 configs/ls1021atwr_nor_SECURE_BOOT_defconfig
create mode 100644 drivers/crypto/fsl/Makefile
create mode 100644 drivers/crypto/fsl/desc.h
create mode 100644 drivers/crypto/fsl/desc_constr.h
create mode 100644 drivers/crypto/fsl/error.c
create mode 100644 drivers/crypto/fsl/fsl_blob.c
create mode 100644 drivers/crypto/fsl/fsl_hash.c
create mode 100644 drivers/crypto/fsl/jobdesc.c
create mode 100644 drivers/crypto/fsl/jobdesc.h
create mode 100644 drivers/crypto/fsl/jr.c
create mode 100644 drivers/crypto/fsl/jr.h
create mode 100644 include/fsl_sec.h
Thanks,
York
^ permalink raw reply [flat|nested] 147+ messages in thread* [U-Boot] Please pull u-boot-fsl-qoriq master
2014-10-20 21:29 York Sun
@ 2014-10-21 19:55 ` Tom Rini
0 siblings, 0 replies; 147+ messages in thread
From: Tom Rini @ 2014-10-21 19:55 UTC (permalink / raw)
To: u-boot
On Mon, Oct 20, 2014 at 02:29:00PM -0700, York Sun wrote:
> Tom,
>
> The following changes since commit c43fd23cf619856b0763a64a6a3bcf3663058c49:
>
> Prepare v2014.10 (2014-10-14 04:47:15 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-fsl-qoriq.git master
>
> for you to fetch changes up to ba4740205d22d31da289f5b6b2f8db7d27896f40:
>
> ls102x: Add support for secure boot and enable blob command (2014-10-16
> 14:21:26 -0700)
>
> ----------------------------------------------------------------
> Ruchika Gupta (10):
> powerpc/P1010RDB:Update RESET_VECTOR_ADDRESS for 768KB u-boot size
> fsl_sec : Move SEC CCSR definition to common include
> fsl_sec : Change accessor function to take care of endianness
> fsl_sec: Add hardware accelerated SHA256 and SHA1
> mpc85xx: configs - Add hash command in freescale platforms
> ls102x: configs - Add hash command in freescale LS1 platforms
> powerpc/mpc85xx: SECURE BOOT - Bypass PAMU in case of secure boot
> crypto/fsl: Add command for encapsulating/decapsulating blobs
> mpc85xx: configs - Enable blob command in freescale platforms
> ls102x: Add support for secure boot and enable blob command
>
> README | 6 +
> arch/arm/include/asm/arch-ls102xa/config.h | 4 +
> arch/powerpc/cpu/mpc85xx/cpu_init.c | 18 +-
> arch/powerpc/cpu/mpc85xx/fdt.c | 2 +-
> arch/powerpc/cpu/mpc85xx/liodn.c | 4 +-
> arch/powerpc/cpu/mpc8xxx/fdt.c | 4 +-
> arch/powerpc/include/asm/config_mpc85xx.h | 1 +
> arch/powerpc/include/asm/immap_85xx.h | 73 +--
> arch/powerpc/include/asm/types.h | 4 +
> board/freescale/ls1021aqds/MAINTAINERS | 1 +
> board/freescale/ls1021aqds/ls1021aqds.c | 10 +
> board/freescale/ls1021atwr/MAINTAINERS | 1 +
> board/freescale/ls1021atwr/ls1021atwr.c | 10 +
> common/Makefile | 2 +
> common/cmd_blob.c | 109 +++++
> configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 3 +
> configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 3 +
> drivers/crypto/Makefile | 1 +
> drivers/crypto/fsl/Makefile | 10 +
> drivers/crypto/fsl/desc.h | 651 ++++++++++++++++++++++++++
> drivers/crypto/fsl/desc_constr.h | 280 +++++++++++
> drivers/crypto/fsl/error.c | 258 ++++++++++
> drivers/crypto/fsl/fsl_blob.c | 61 +++
> drivers/crypto/fsl/fsl_hash.c | 77 +++
> drivers/crypto/fsl/jobdesc.c | 125 +++++
> drivers/crypto/fsl/jobdesc.h | 29 ++
> drivers/crypto/fsl/jr.c | 462 ++++++++++++++++++
> drivers/crypto/fsl/jr.h | 97 ++++
> include/configs/B4860QDS.h | 11 +
> include/configs/BSC9131RDB.h | 7 +
> include/configs/BSC9132QDS.h | 11 +
> include/configs/C29XPCIE.h | 7 +
> include/configs/P1010RDB.h | 13 +-
> include/configs/P2041RDB.h | 11 +
> include/configs/T1040QDS.h | 8 +
> include/configs/T104xRDB.h | 8 +
> include/configs/T208xQDS.h | 8 +
> include/configs/T208xRDB.h | 8 +
> include/configs/T4240QDS.h | 11 +
> include/configs/T4240RDB.h | 8 +
> include/configs/corenet_ds.h | 11 +
> include/configs/ls1021aqds.h | 11 +
> include/configs/ls1021atwr.h | 12 +
> include/fsl_sec.h | 181 +++++++
> 44 files changed, 2558 insertions(+), 74 deletions(-)
> create mode 100644 common/cmd_blob.c
> create mode 100644 configs/ls1021aqds_nor_SECURE_BOOT_defconfig
> create mode 100644 configs/ls1021atwr_nor_SECURE_BOOT_defconfig
> create mode 100644 drivers/crypto/fsl/Makefile
> create mode 100644 drivers/crypto/fsl/desc.h
> create mode 100644 drivers/crypto/fsl/desc_constr.h
> create mode 100644 drivers/crypto/fsl/error.c
> create mode 100644 drivers/crypto/fsl/fsl_blob.c
> create mode 100644 drivers/crypto/fsl/fsl_hash.c
> create mode 100644 drivers/crypto/fsl/jobdesc.c
> create mode 100644 drivers/crypto/fsl/jobdesc.h
> create mode 100644 drivers/crypto/fsl/jr.c
> create mode 100644 drivers/crypto/fsl/jr.h
> create mode 100644 include/fsl_sec.h
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20141021/77259b4a/attachment.pgp>
^ permalink raw reply [flat|nested] 147+ messages in thread
end of thread, other threads:[~2019-05-26 10:48 UTC | newest]
Thread overview: 147+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-24 15:44 [U-Boot] Please pull u-boot-fsl-qoriq master York Sun
2015-01-27 11:50 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2019-05-24 5:07 Prabhakar Kushwaha
2019-05-26 10:48 ` Tom Rini
2019-05-22 12:31 Prabhakar Kushwaha
2019-05-22 16:58 ` Tom Rini
2019-03-15 12:54 Prabhakar Kushwaha
2019-03-17 19:30 ` Tom Rini
2019-03-04 8:57 Prabhakar Kushwaha
2019-03-05 2:47 ` Tom Rini
2019-02-20 7:31 Prabhakar Kushwaha
2019-02-21 23:09 ` Tom Rini
2019-01-18 18:09 York Sun
2019-01-19 14:02 ` Tom Rini
2018-09-28 15:04 York Sun
2018-09-30 2:27 ` Tom Rini
2018-08-23 19:01 York Sun
2018-08-24 2:45 ` Tom Rini
2018-08-13 16:19 York Sun
2018-08-13 23:55 ` Tom Rini
2018-06-12 17:24 York Sun
2018-06-12 22:33 ` Tom Rini
2018-06-08 23:49 York Sun
2018-06-09 4:39 ` Tom Rini
2018-06-09 4:46 ` York Sun
2018-06-11 12:25 ` Tom Rini
2018-06-09 4:57 ` York Sun
2018-06-11 12:29 ` Tom Rini
2018-06-11 16:33 ` York Sun
2018-05-11 4:20 York Sun
2018-05-11 15:45 ` Tom Rini
2018-03-20 22:07 York Sun
2018-03-21 1:56 ` Tom Rini
2018-02-12 17:06 York Sun
2018-02-12 22:32 ` Tom Rini
2018-01-31 23:04 York Sun
2018-02-01 13:08 ` Tom Rini
2018-01-24 2:00 York Sun
2018-01-24 16:28 ` Tom Rini
2018-01-17 18:33 York Sun
2018-01-18 13:45 ` Tom Rini
2018-01-11 4:57 York Sun
2018-01-11 18:42 ` Tom Rini
2018-01-05 1:19 York Sun
2018-01-05 16:00 ` York Sun
2017-12-18 16:26 York Sun
2017-12-19 1:56 ` Tom Rini
2017-12-07 22:43 York Sun
2017-12-08 2:49 ` Tom Rini
2017-12-08 14:31 ` Tom Rini
2017-10-27 21:29 York Sun
2017-10-29 11:58 ` Tom Rini
2017-10-12 14:51 York Sun
2017-10-12 22:29 ` Tom Rini
2017-09-23 5:08 York Sun
2017-09-24 14:40 ` Tom Rini
2017-09-12 15:59 York Sun
2017-09-12 21:13 ` Tom Rini
2017-08-10 15:34 York Sun
2017-08-11 2:19 ` Tom Rini
2017-08-11 2:35 ` York Sun
2017-08-11 11:13 ` Tom Rini
2017-08-11 14:35 ` Tom Rini
2017-08-11 14:47 ` York Sun
2017-08-11 14:51 ` Tom Rini
2017-08-01 22:56 York Sun
2017-08-01 23:34 ` Bin Meng
2017-08-03 19:07 ` Tom Rini
2017-06-02 17:46 york sun
2017-06-04 17:11 ` Tom Rini
2017-04-25 15:44 York Sun
2017-04-26 19:16 ` Tom Rini
2017-04-18 15:32 York Sun
2017-04-19 13:02 ` Tom Rini
2017-03-28 18:02 york sun
2017-04-04 19:59 ` Tom Rini
2017-03-14 19:31 york sun
2017-03-09 21:33 york sun
2017-03-10 15:23 ` Tom Rini
2017-03-10 16:46 ` york sun
2017-03-10 21:07 ` Tom Rini
2017-03-10 21:21 ` york sun
2017-03-10 21:42 ` Tom Rini
2017-02-03 22:35 york sun
2017-02-05 16:25 ` Tom Rini
2017-01-19 17:20 york sun
2017-01-20 13:50 ` Tom Rini
2016-12-16 17:43 york sun
2016-12-17 3:18 ` Tom Rini
2016-12-05 19:39 york sun
2016-12-06 0:37 ` Tom Rini
2016-11-23 19:13 york sun
2016-11-29 15:55 ` Tom Rini
2016-11-23 1:06 york sun
2016-11-23 12:22 ` Tom Rini
2016-11-23 16:53 ` york sun
2016-09-20 18:09 york sun
2016-09-20 19:31 ` Tom Rini
2016-09-20 19:55 ` york sun
[not found] ` <0ca4216b-c5ed-b18b-6f75-74c136269d5e@nxp.com>
2016-09-20 20:23 ` york sun
2016-08-02 23:42 york sun
2016-08-03 12:19 ` Tom Rini
2016-07-26 20:28 york sun
2016-07-27 0:58 ` Tom Rini
2016-07-19 20:29 york sun
2016-07-20 2:22 ` Tom Rini
2016-06-10 22:18 York Sun
2016-06-19 14:03 ` Tom Rini
2016-05-24 17:28 York Sun
2016-05-24 23:18 ` Tom Rini
2016-04-06 17:35 York Sun
2016-04-08 19:44 ` Tom Rini
2016-03-29 16:06 York Sun
2016-03-29 22:06 ` Tom Rini
2016-03-22 15:52 york sun
2016-03-23 1:58 ` Tom Rini
2016-02-24 17:02 york sun
2016-02-25 15:22 ` Tom Rini
2016-02-02 2:41 york sun
2016-02-02 15:49 ` Tom Rini
2015-12-17 6:42 York Sun
2015-12-18 0:28 ` Tom Rini
2015-12-15 1:16 York Sun
2015-12-15 23:29 ` Tom Rini
2015-12-16 1:40 ` York Sun
2015-12-16 1:48 ` York Sun
2015-12-16 1:59 ` Tom Rini
2015-12-16 2:01 ` York Sun
2015-12-16 2:14 ` York Sun
2015-11-30 19:32 York Sun
2015-12-01 1:37 ` Tom Rini
2015-10-30 16:26 York Sun
2015-10-30 19:54 ` Tom Rini
2015-09-02 3:00 York Sun
2015-09-02 21:58 ` Tom Rini
2015-08-04 16:08 York Sun
2015-08-04 17:50 ` Tom Rini
2015-07-20 21:07 York Sun
2015-07-21 13:50 ` Tom Rini
2015-05-22 20:55 York Sun
2015-05-23 12:42 ` Tom Rini
2015-04-24 2:17 York Sun
2015-04-28 14:50 ` Tom Rini
2015-02-25 21:29 York Sun
2015-02-26 2:58 ` Tom Rini
2014-10-20 21:29 York Sun
2014-10-21 19:55 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.