* [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller @ 2015-01-27 15:12 Huy Cong Vu 2015-01-27 15:39 ` Gilles Chanteperdrix 2015-02-11 20:22 ` Gilles Chanteperdrix 0 siblings, 2 replies; 9+ messages in thread From: Huy Cong Vu @ 2015-01-27 15:12 UTC (permalink / raw) To: xenomai Hello Xenomai group, I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with the Intel I218V Ethernet Controller. It is patched on linux 3.14.17. Here I attached the patch to make rtnet work with i217/i218 Intel family. Also, I found out that in rtpacket module, the declaration of packet_proto_drv lack of .device_count attribute, which makes the rtpacket & rtcap modules unable to loaded ( -EINVAL is returned), so I merge it in my patch too. I test on my system and all the following command is now working: modprobe rtnet modprobe rt_e1000e modprobe rtpacket modprobe rtcap rtifconfig rteth0 up ifconfig rteth0 up ifconfig rteth0-mac up But if I used the rteth0 interface, I can't unload rt_e1000e. Could you take a look and see if anything is wrong, and if you find it useful, merge it in your git repository. Best regards, -- Huy Cong Wandercraft SAS -------------- next part -------------- A non-text attachment was scrubbed... Name: xenomai-3-next-rtnet-i217.patch Type: text/x-patch Size: 26921 bytes Desc: not available URL: <http://www.xenomai.org/pipermail/xenomai/attachments/20150127/b0caea4a/attachment.bin> ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-01-27 15:12 [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller Huy Cong Vu @ 2015-01-27 15:39 ` Gilles Chanteperdrix 2015-01-27 15:54 ` Huy Cong Vu 2015-02-11 20:22 ` Gilles Chanteperdrix 1 sibling, 1 reply; 9+ messages in thread From: Gilles Chanteperdrix @ 2015-01-27 15:39 UTC (permalink / raw) To: Huy Cong Vu; +Cc: xenomai On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: > Hello Xenomai group, > I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with the Intel I218V Ethernet Controller. > It is patched on linux 3.14.17. Here I attached the patch to make rtnet work with i217/i218 Intel family. > Also, I found out that in rtpacket module, the declaration of packet_proto_drv lack of .device_count attribute, which makes the rtpacket & rtcap modules unable to loaded ( -EINVAL is returned), so I merge it in my patch too. > I test on my system and all the following command is now working: > modprobe rtnet > modprobe rt_e1000e > modprobe rtpacket > modprobe rtcap > rtifconfig rteth0 up > ifconfig rteth0 up > ifconfig rteth0-mac up > But if I used the rteth0 interface, I can't unload rt_e1000e. > Could you take a look and see if anything is wrong, and if you find it useful, merge it in your git repository. > Best regards, In Xenomai 3, you need to deconfigure the interface before you try to unload it. -- Gilles. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-01-27 15:39 ` Gilles Chanteperdrix @ 2015-01-27 15:54 ` Huy Cong Vu 2015-01-27 16:00 ` Gilles Chanteperdrix 0 siblings, 1 reply; 9+ messages in thread From: Huy Cong Vu @ 2015-01-27 15:54 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: xenomai ----- Mail original ----- > De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > Cc: xenomai@xenomai.org > Envoyé: Mardi 27 Janvier 2015 16:39:03 > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: >> Hello Xenomai group, >> I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with >> the Intel I218V Ethernet Controller. >> It is patched on linux 3.14.17. Here I attached the patch to make rtnet work >> with i217/i218 Intel family. >> Also, I found out that in rtpacket module, the declaration of packet_proto_drv >> lack of .device_count attribute, which makes the rtpacket & rtcap modules >> unable to loaded ( -EINVAL is returned), so I merge it in my patch too. >> I test on my system and all the following command is now working: >> modprobe rtnet >> modprobe rt_e1000e >> modprobe rtpacket >> modprobe rtcap >> rtifconfig rteth0 up >> ifconfig rteth0 up >> ifconfig rteth0-mac up >> But if I used the rteth0 interface, I can't unload rt_e1000e. >> Could you take a look and see if anything is wrong, and if you find it useful, >> merge it in your git repository. >> Best regards, > > In Xenomai 3, you need to deconfigure the interface before you try > to unload it. If I tried to turn off rteth0 interface after using it, I still can't unload rt_e1000e. For now, this work: modprobe rt_e1000e modprobe rtpacket rtifconfig rteth0 up rtifconfig rteth0 down rmmod rt_e1000e rmmod rtpacket This doesn't work: modprobe rt_e1000e modprobe rtpacket rtifconfig rteth0 up //Send datagram through rteth0 interface rtifconfig rteth0 down rmmod rt_e1000e Do I have to do anything special from application level to deconfigure rteth0 too? > > -- > Gilles. -- Huy Cong Wandercraft SAS ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-01-27 15:54 ` Huy Cong Vu @ 2015-01-27 16:00 ` Gilles Chanteperdrix 2015-01-27 16:11 ` Huy Cong Vu 0 siblings, 1 reply; 9+ messages in thread From: Gilles Chanteperdrix @ 2015-01-27 16:00 UTC (permalink / raw) To: Huy Cong Vu; +Cc: xenomai On Tue, Jan 27, 2015 at 04:54:39PM +0100, Huy Cong Vu wrote: > > > ----- Mail original ----- > > De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > > À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > > Cc: xenomai@xenomai.org > > Envoyé: Mardi 27 Janvier 2015 16:39:03 > > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > > > On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: > >> Hello Xenomai group, > >> I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with > >> the Intel I218V Ethernet Controller. > >> It is patched on linux 3.14.17. Here I attached the patch to make rtnet work > >> with i217/i218 Intel family. > >> Also, I found out that in rtpacket module, the declaration of packet_proto_drv > >> lack of .device_count attribute, which makes the rtpacket & rtcap modules > >> unable to loaded ( -EINVAL is returned), so I merge it in my patch too. > >> I test on my system and all the following command is now working: > >> modprobe rtnet > >> modprobe rt_e1000e > >> modprobe rtpacket > >> modprobe rtcap > >> rtifconfig rteth0 up > >> ifconfig rteth0 up > >> ifconfig rteth0-mac up > >> But if I used the rteth0 interface, I can't unload rt_e1000e. > >> Could you take a look and see if anything is wrong, and if you find it useful, > >> merge it in your git repository. > >> Best regards, > > > > In Xenomai 3, you need to deconfigure the interface before you try > > to unload it. > > If I tried to turn off rteth0 interface after using it, I still can't unload rt_e1000e. > For now, this work: > modprobe rt_e1000e > modprobe rtpacket > rtifconfig rteth0 up > rtifconfig rteth0 down > rmmod rt_e1000e > rmmod rtpacket > > This doesn't work: > modprobe rt_e1000e > modprobe rtpacket > rtifconfig rteth0 up > //Send datagram through rteth0 interface > rtifconfig rteth0 down > rmmod rt_e1000e > > Do I have to do anything special from application level to deconfigure rteth0 too? No, rtifconfig down should be enough. Note that the module count handling requires some patches in the I-pipe kernel. Since it was reworked, it is entirely possible that there are some glitches with it, or that some necessary change in rt_e1000e.c is missing. Also, since the multiple modules system will not fly for building rtnet and its modules into the kernel, this will be reworked. Other than that, does rtnet work for you ? -- Gilles. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-01-27 16:00 ` Gilles Chanteperdrix @ 2015-01-27 16:11 ` Huy Cong Vu 2015-02-10 10:46 ` Huy Cong Vu 0 siblings, 1 reply; 9+ messages in thread From: Huy Cong Vu @ 2015-01-27 16:11 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: xenomai ----- Mail original ----- > De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > Cc: xenomai@xenomai.org > Envoyé: Mardi 27 Janvier 2015 17:00:45 > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > On Tue, Jan 27, 2015 at 04:54:39PM +0100, Huy Cong Vu wrote: >> >> >> ----- Mail original ----- >> > De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> >> > À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> >> > Cc: xenomai@xenomai.org >> > Envoyé: Mardi 27 Janvier 2015 16:39:03 >> > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller >> >> > On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: >> >> Hello Xenomai group, >> >> I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with >> >> the Intel I218V Ethernet Controller. >> >> It is patched on linux 3.14.17. Here I attached the patch to make rtnet work >> >> with i217/i218 Intel family. >> >> Also, I found out that in rtpacket module, the declaration of packet_proto_drv >> >> lack of .device_count attribute, which makes the rtpacket & rtcap modules >> >> unable to loaded ( -EINVAL is returned), so I merge it in my patch too. >> >> I test on my system and all the following command is now working: >> >> modprobe rtnet >> >> modprobe rt_e1000e >> >> modprobe rtpacket >> >> modprobe rtcap >> >> rtifconfig rteth0 up >> >> ifconfig rteth0 up >> >> ifconfig rteth0-mac up >> >> But if I used the rteth0 interface, I can't unload rt_e1000e. >> >> Could you take a look and see if anything is wrong, and if you find it useful, >> >> merge it in your git repository. >> >> Best regards, >> > >> > In Xenomai 3, you need to deconfigure the interface before you try >> > to unload it. >> >> If I tried to turn off rteth0 interface after using it, I still can't unload >> rt_e1000e. >> For now, this work: >> modprobe rt_e1000e >> modprobe rtpacket >> rtifconfig rteth0 up >> rtifconfig rteth0 down >> rmmod rt_e1000e >> rmmod rtpacket >> >> This doesn't work: >> modprobe rt_e1000e >> modprobe rtpacket >> rtifconfig rteth0 up >> //Send datagram through rteth0 interface >> rtifconfig rteth0 down >> rmmod rt_e1000e >> >> Do I have to do anything special from application level to deconfigure rteth0 >> too? > > No, rtifconfig down should be enough. Note that the module count > handling requires some patches in the I-pipe kernel. Since it was > reworked, it is entirely possible that there are some glitches with > it, or that some necessary change in rt_e1000e.c is missing. > > Also, since the multiple modules system will not fly for building > rtnet and its modules into the kernel, this will be reworked. > > Other than that, does rtnet work for you ? Yes, except this problem, my test with rtnet runs fine. > > -- > Gilles. -- Huy Cong Wandercraft SAS ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-01-27 16:11 ` Huy Cong Vu @ 2015-02-10 10:46 ` Huy Cong Vu 2015-02-10 12:26 ` Gilles Chanteperdrix 2015-02-11 20:23 ` Gilles Chanteperdrix 0 siblings, 2 replies; 9+ messages in thread From: Huy Cong Vu @ 2015-02-10 10:46 UTC (permalink / raw) To: Gilles Chanteperdrix; +Cc: xenomai ----- Mail original ----- > De: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > À: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > Cc: xenomai@xenomai.org > Envoyé: Mardi 27 Janvier 2015 17:11:40 > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > ----- Mail original ----- >> De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> >> À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> >> Cc: xenomai@xenomai.org >> Envoyé: Mardi 27 Janvier 2015 17:00:45 >> Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > >> On Tue, Jan 27, 2015 at 04:54:39PM +0100, Huy Cong Vu wrote: >>> >>> >>> ----- Mail original ----- >>> > De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> >>> > À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> >>> > Cc: xenomai@xenomai.org >>> > Envoyé: Mardi 27 Janvier 2015 16:39:03 >>> > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller >>> >>> > On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: >>> >> Hello Xenomai group, >>> >> I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with >>> >> the Intel I218V Ethernet Controller. >>> >> It is patched on linux 3.14.17. Here I attached the patch to make rtnet work >>> >> with i217/i218 Intel family. >>> >> Also, I found out that in rtpacket module, the declaration of packet_proto_drv >>> >> lack of .device_count attribute, which makes the rtpacket & rtcap modules >>> >> unable to loaded ( -EINVAL is returned), so I merge it in my patch too. >>> >> I test on my system and all the following command is now working: >>> >> modprobe rtnet >>> >> modprobe rt_e1000e >>> >> modprobe rtpacket >>> >> modprobe rtcap >>> >> rtifconfig rteth0 up >>> >> ifconfig rteth0 up >>> >> ifconfig rteth0-mac up >>> >> But if I used the rteth0 interface, I can't unload rt_e1000e. >>> >> Could you take a look and see if anything is wrong, and if you find it useful, >>> >> merge it in your git repository. >>> >> Best regards, >>> > >>> > In Xenomai 3, you need to deconfigure the interface before you try >>> > to unload it. >>> >>> If I tried to turn off rteth0 interface after using it, I still can't unload >>> rt_e1000e. >>> For now, this work: >>> modprobe rt_e1000e >>> modprobe rtpacket >>> rtifconfig rteth0 up >>> rtifconfig rteth0 down >>> rmmod rt_e1000e >>> rmmod rtpacket >>> >>> This doesn't work: >>> modprobe rt_e1000e >>> modprobe rtpacket >>> rtifconfig rteth0 up >>> //Send datagram through rteth0 interface >>> rtifconfig rteth0 down >>> rmmod rt_e1000e >>> This patch helps. diff --git a/kernel/drivers/net/stack/packet/af_packet.c b/kernel/drivers/net/stack/packet/af_packet.c index dd862fe..6a9f183 100644 --- a/kernel/drivers/net/stack/packet/af_packet.c +++ b/kernel/drivers/net/stack/packet/af_packet.c @@ -456,6 +456,7 @@ rt_packet_sendmsg(struct rtdm_fd *fd, const struct msghdr *msg, int msg_flags) } out: + rtdev_dereference(rtdev); return ret; err: Now it seems ok to unload all modules for me. >>> Do I have to do anything special from application level to deconfigure rteth0 >>> too? >> >> No, rtifconfig down should be enough. Note that the module count >> handling requires some patches in the I-pipe kernel. Since it was >> reworked, it is entirely possible that there are some glitches with >> it, or that some necessary change in rt_e1000e.c is missing. >> >> Also, since the multiple modules system will not fly for building >> rtnet and its modules into the kernel, this will be reworked. >> >> Other than that, does rtnet work for you ? > > Yes, except this problem, my test with rtnet runs fine. > >> >> -- >> Gilles. > > -- > Huy Cong > Wandercraft SAS > > _______________________________________________ > Xenomai mailing list > Xenomai@xenomai.org > http://www.xenomai.org/mailman/listinfo/xenomai -- Huy Cong Wandercraft SAS ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-02-10 10:46 ` Huy Cong Vu @ 2015-02-10 12:26 ` Gilles Chanteperdrix 2015-02-11 20:23 ` Gilles Chanteperdrix 1 sibling, 0 replies; 9+ messages in thread From: Gilles Chanteperdrix @ 2015-02-10 12:26 UTC (permalink / raw) To: Huy Cong Vu; +Cc: xenomai On Tue, Feb 10, 2015 at 11:46:01AM +0100, Huy Cong Vu wrote: > > > ----- Mail original ----- > > De: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > > À: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > > Cc: xenomai@xenomai.org > > Envoyé: Mardi 27 Janvier 2015 17:11:40 > > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > > > ----- Mail original ----- > >> De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > >> À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > >> Cc: xenomai@xenomai.org > >> Envoyé: Mardi 27 Janvier 2015 17:00:45 > >> Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > > > >> On Tue, Jan 27, 2015 at 04:54:39PM +0100, Huy Cong Vu wrote: > >>> > >>> > >>> ----- Mail original ----- > >>> > De: "Gilles Chanteperdrix" <gilles.chanteperdrix@xenomai.org> > >>> > À: "Huy Cong Vu" <huy-cong.vu@wandercraft.eu> > >>> > Cc: xenomai@xenomai.org > >>> > Envoyé: Mardi 27 Janvier 2015 16:39:03 > >>> > Objet: Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller > >>> > >>> > On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: > >>> >> Hello Xenomai group, > >>> >> I recently run a test of rtnet on xenomai-3-next on my Intel NUC D54250WYK with > >>> >> the Intel I218V Ethernet Controller. > >>> >> It is patched on linux 3.14.17. Here I attached the patch to make rtnet work > >>> >> with i217/i218 Intel family. > >>> >> Also, I found out that in rtpacket module, the declaration of packet_proto_drv > >>> >> lack of .device_count attribute, which makes the rtpacket & rtcap modules > >>> >> unable to loaded ( -EINVAL is returned), so I merge it in my patch too. > >>> >> I test on my system and all the following command is now working: > >>> >> modprobe rtnet > >>> >> modprobe rt_e1000e > >>> >> modprobe rtpacket > >>> >> modprobe rtcap > >>> >> rtifconfig rteth0 up > >>> >> ifconfig rteth0 up > >>> >> ifconfig rteth0-mac up > >>> >> But if I used the rteth0 interface, I can't unload rt_e1000e. > >>> >> Could you take a look and see if anything is wrong, and if you find it useful, > >>> >> merge it in your git repository. > >>> >> Best regards, > >>> > > >>> > In Xenomai 3, you need to deconfigure the interface before you try > >>> > to unload it. > >>> > >>> If I tried to turn off rteth0 interface after using it, I still can't unload > >>> rt_e1000e. > >>> For now, this work: > >>> modprobe rt_e1000e > >>> modprobe rtpacket > >>> rtifconfig rteth0 up > >>> rtifconfig rteth0 down > >>> rmmod rt_e1000e > >>> rmmod rtpacket > >>> > >>> This doesn't work: > >>> modprobe rt_e1000e > >>> modprobe rtpacket > >>> rtifconfig rteth0 up > >>> //Send datagram through rteth0 interface > >>> rtifconfig rteth0 down > >>> rmmod rt_e1000e > >>> > > This patch helps. > > diff --git a/kernel/drivers/net/stack/packet/af_packet.c b/kernel/drivers/net/stack/packet/af_packet.c > index dd862fe..6a9f183 100644 > --- a/kernel/drivers/net/stack/packet/af_packet.c > +++ b/kernel/drivers/net/stack/packet/af_packet.c > @@ -456,6 +456,7 @@ rt_packet_sendmsg(struct rtdm_fd *fd, const struct msghdr *msg, int msg_flags) > } > > out: > + rtdev_dereference(rtdev); > return ret; > > err: > > Now it seems ok to unload all modules for me. Ok, will merge, thanks. -- Gilles. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-02-10 10:46 ` Huy Cong Vu 2015-02-10 12:26 ` Gilles Chanteperdrix @ 2015-02-11 20:23 ` Gilles Chanteperdrix 1 sibling, 0 replies; 9+ messages in thread From: Gilles Chanteperdrix @ 2015-02-11 20:23 UTC (permalink / raw) To: Huy Cong Vu; +Cc: xenomai On Tue, Feb 10, 2015 at 11:46:01AM +0100, Huy Cong Vu wrote: > This patch helps. > > diff --git a/kernel/drivers/net/stack/packet/af_packet.c b/kernel/drivers/net/stack/packet/af_packet.c > index dd862fe..6a9f183 100644 > --- a/kernel/drivers/net/stack/packet/af_packet.c > +++ b/kernel/drivers/net/stack/packet/af_packet.c > @@ -456,6 +456,7 @@ rt_packet_sendmsg(struct rtdm_fd *fd, const struct msghdr *msg, int msg_flags) > } > > out: > + rtdev_dereference(rtdev); > return ret; > > err: > > Now it seems ok to unload all modules for me. Merged, thanks. -- Gilles. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller 2015-01-27 15:12 [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller Huy Cong Vu 2015-01-27 15:39 ` Gilles Chanteperdrix @ 2015-02-11 20:22 ` Gilles Chanteperdrix 1 sibling, 0 replies; 9+ messages in thread From: Gilles Chanteperdrix @ 2015-02-11 20:22 UTC (permalink / raw) To: Huy Cong Vu; +Cc: xenomai On Tue, Jan 27, 2015 at 04:12:48PM +0100, Huy Cong Vu wrote: > Could you take a look and see if anything is wrong, and if you find it useful, merge it in your git repository. Merged, thanks. -- Gilles. ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-02-11 20:23 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-01-27 15:12 [Xenomai] Patch rtnet support Intel i217/i218 Ethernet Controller Huy Cong Vu 2015-01-27 15:39 ` Gilles Chanteperdrix 2015-01-27 15:54 ` Huy Cong Vu 2015-01-27 16:00 ` Gilles Chanteperdrix 2015-01-27 16:11 ` Huy Cong Vu 2015-02-10 10:46 ` Huy Cong Vu 2015-02-10 12:26 ` Gilles Chanteperdrix 2015-02-11 20:23 ` Gilles Chanteperdrix 2015-02-11 20:22 ` Gilles Chanteperdrix
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.