[PATCH 3.14 00/73] 3.14.35-stable review

[PATCH 3.14 00/73] 3.14.35-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.14.35 release.
There are 73 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Mar  6 05:52:50 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.35-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.35-rc1

Hector Marco-Gisbert <hecmargi@upv.es>
    x86, mm/ASLR: Fix stack randomization on 64-bit systems

Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
    blk-throttle: check stats_cpu before reading it from sysfs

David Sterba <dsterba@suse.cz>
    btrfs: fix leak of path in btrfs_find_item

David Sterba <dsterba@suse.cz>
    btrfs: set proper message level for skinny metadata

Chen Jie <chenjie6@huawei.com>
    jffs2: fix handling of corrupted summary length

Daniel J Blueman <daniel@numascale.com>
    EDAC, amd64_edac: Prevent OOPS with >16 memory controllers

Tomáš Hodek <tomas.hodek@volny.cz>
    md/raid1: fix read balance when a drive is write-mostly.

NeilBrown <neilb@suse.de>
    md/raid5: Fix livelock when array is both resyncing and degraded.

James Hogan <james.hogan@imgtec.com>
    metag: Fix KSTK_EIP() and KSTK_ESP() macros

Jan Kara <jack@suse.cz>
    xfs: Fix quota type in quota structures when reusing quota file

Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
    gpio: tps65912: fix wrong container_of arguments

Hans Holmberg <hans.holmberg@intel.com>
    gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node

Catalin Marinas <catalin.marinas@arm.com>
    arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endian

Martin Vajnar <martin.vajnar@gmail.com>
    hx4700: regulator: declare full constraints

Marcelo Tosatti <mtosatti@redhat.com>
    KVM: x86: update masterclock values on TSC writes

James Hogan <james.hogan@imgtec.com>
    KVM: MIPS: Don't leak FPU/DSP to guest

David Hildenbrand <dahi@linux.vnet.ibm.com>
    KVM: s390: floating irqs: fix user triggerable endless loop

Alexey Brodkin <abrodkin@synopsys.com>
    ARC: fix page address calculation if PAGE_OFFSET != LINUX_LINK_BASE

John Stultz <john.stultz@linaro.org>
    ntp: Fixup adjtimex freq validation on 32-bit systems

Jay Lan <jlan@sgi.com>
    kdb: fix incorrect counts in KDB summary command output

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
    ARM: pxa: add regulator_has_full_constraints to poodle board file

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
    ARM: pxa: add regulator_has_full_constraints to corgi board file

Nicolas Pitre <nicolas.pitre@linaro.org>
    vt: provide notifications on selection changes

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

Alan Stern <stern@rowland.harvard.edu>
    USB: fix use-after-free bug in usb_hcd_unlink_urb()

Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
    USB: cp210x: add ID for RUGGEDCOM USB Serial Console

Cyrille Pitchen <cyrille.pitchen@atmel.com>
    tty/serial: at91: fix error handling in atmel_serial_probe()

Peter Hurley <peter@hurleysoftware.com>
    tty: Prevent untrappable signals from malicious program

Matthew Wilcox <matthew.r.wilcox@intel.com>
    axonram: Fix bug in direct_access

Jeff Moyer <jmoyer@redhat.com>
    cfq-iosched: fix incorrect filing of rt async cfqq

Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
    cfq-iosched: handle failure of cfq group allocation

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Drop problematic active_ts_list usage

Trond Myklebust <trond.myklebust@primarydata.com>
    NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args

honclo <honclo@imap.linux.ibm.com>
    Added Little Endian support to vtpm module

Christophe Ricard <christophe.ricard@gmail.com>
    tpm/tpm_i2c_stm_st33: Fix potential bug in tpm_stm_i2c_send

Hon Ching (Vicky) Lo <honclo@linux.vnet.ibm.com>
    tpm: Fix NULL return in tpm_ibmvtpm_get_desired_dma

Kiran Padwal <kiran.padwal@smartplayin.com>
    char: tpm: Add missing error check for devm_kzalloc

David Howells <dhowells@redhat.com>
    TPM: Add new TPMs to the tail of the list to prevent inadvertent change of dev

Scot Doyle <lkml14@scotdoyle.com>
    tpm_tis: verify interrupt during init

Robert Nelson <robertcnelson@gmail.com>
    ARM: dts: am335x-bone*: usb0 is hardwired for peripheral

Dmitry Osipenko <digetx@gmail.com>
    ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses

Lokesh Vutla <lokeshvutla@ti.com>
    ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
    ARM: 8284/1: sa1100: clear RCSR_SMR on resume

Vikram Mulukutla <markivx@codeaurora.org>
    tracing: Fix unmapping loop in tracing_mark_write

Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
    mm/hugetlb: pmd_huge() returns true for non-present hugepage

James Hogan <james.hogan@imgtec.com>
    MIPS: KVM: Deliver guest interrupts after local_irq_disable()

Jeff Layton <jlayton@primarydata.com>
    nfs: don't call blocking operations while !TASK_RUNNING

Jisheng Zhang <jszhang@marvell.com>
    mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles

Russell King <rmk+kernel@arm.linux.org.uk>
    em28xx-audio: fix missing newlines

Russell King <rmk+kernel@arm.linux.org.uk>
    em28xx: ensure "closing" messages terminate with a newline

Sumit.Saxena@avagotech.com <Sumit.Saxena@avagotech.com>
    megaraid_sas: disable interrupt_mask before enabling hardware interrupts

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
    power: gpio-charger: balance enable/disable_irq_wake calls

Krzysztof Kozlowski <k.kozlowski@samsung.com>
    power: bq24190: Fix ignored supplicants

Krzysztof Kozlowski <k.kozlowski@samsung.com>
    power_supply: 88pm860x: Fix leaked power supply on probe fail

Adrian Knoth <adi@drcomp.erfurt.thur.de>
    ALSA: hdspm - Constrain periods to 2 on older cards

Dan Carpenter <dan.carpenter@oracle.com>
    ALSA: off by one bug in snd_riptide_joystick_probe()

Malcolm Priestley <tvboxspy@gmail.com>
    lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb

Ross Lagerwall <ross.lagerwall@citrix.com>
    xen/manage: Fix USB interaction issues when resuming

Arnd Bergmann <arnd@arndb.de>
    cpufreq: s3c: remove incorrect __init annotations

Mikulas Patocka <mpatocka@redhat.com>
    cpufreq: speedstep-smi: enable interrupts when waiting

Viresh Kumar <viresh.kumar@linaro.org>
    cpufreq: Set cpufreq_cpu_data to NULL before putting kobject

Michel Dänzer <michel.daenzer@amd.com>
    PCI: Fix infinite loop with ROM image of size 0

Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
    PCI: Generate uppercase hex for modalias var in uevent

Seth Forshee <seth.forshee@canonical.com>
    HID: i2c-hid: Limit reads to wMaxInputLength bytes for input events

Luciano Coelho <luciano.coelho@intel.com>
    iwlwifi: mvm: always use mac color zero

Luciano Coelho <luciano.coelho@intel.com>
    iwlwifi: mvm: fix failure path when power_update fails in add_interface

Eyal Shapira <eyal@wizery.com>
    iwlwifi: mvm: validate tid and sta_id in ba_notif

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: pcie: disable the SCD_BASE_ADDR when we resume from WoWLAN

Jan Kara <jack@suse.cz>
    fsnotify: fix handling of renames in audit

Dave Chinner <dchinner@redhat.com>
    xfs: set superblock buffer type correctly

Dave Chinner <dchinner@redhat.com>
    xfs: inode unlink does not set AGI buffer type

Dave Chinner <dchinner@redhat.com>
    xfs: ensure buffer types are set correctly

Adam Lee <adam.lee@canonical.com>
    Bluetooth: ath3k: workaround the compatibility issue with xHCI controller


-------------

Diffstat:

 Makefile                                    |  4 +-
 arch/arc/include/asm/pgtable.h              |  3 +-
 arch/arm/boot/dts/am335x-bone-common.dtsi   |  1 +
 arch/arm/boot/dts/tegra20.dtsi              |  8 +--
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c   |  2 +-
 arch/arm/mach-pxa/corgi.c                   |  3 ++
 arch/arm/mach-pxa/hx4700.c                  |  2 +
 arch/arm/mach-pxa/poodle.c                  |  2 +
 arch/arm/mach-sa1100/pm.c                   |  1 +
 arch/arm64/kernel/signal32.c                |  5 +-
 arch/metag/include/asm/processor.h          |  4 +-
 arch/mips/kvm/kvm_locore.S                  |  2 +-
 arch/mips/kvm/kvm_mips.c                    |  8 +--
 arch/powerpc/sysdev/axonram.c               |  2 +-
 arch/s390/kvm/interrupt.c                   |  2 +
 arch/x86/kvm/x86.c                          | 19 ++++----
 arch/x86/mm/gup.c                           |  2 +-
 arch/x86/mm/hugetlbpage.c                   |  8 ++-
 arch/x86/mm/mmap.c                          |  6 +--
 block/blk-throttle.c                        |  3 ++
 block/cfq-iosched.c                         | 16 ++++--
 drivers/bluetooth/ath3k.c                   |  8 +++
 drivers/char/tpm/tpm-interface.c            |  2 +-
 drivers/char/tpm/tpm_i2c_atmel.c            |  4 ++
 drivers/char/tpm/tpm_i2c_nuvoton.c          |  5 ++
 drivers/char/tpm/tpm_i2c_stm_st33.c         |  2 +-
 drivers/char/tpm/tpm_ibmvtpm.c              | 28 ++++++++---
 drivers/char/tpm/tpm_tis.c                  | 76 +++++++++++++++++++++++------
 drivers/cpufreq/cpufreq.c                   |  6 +--
 drivers/cpufreq/s3c2416-cpufreq.c           |  4 +-
 drivers/cpufreq/s3c24xx-cpufreq.c           |  2 +-
 drivers/cpufreq/speedstep-lib.c             |  3 ++
 drivers/cpufreq/speedstep-smi.c             | 12 +++++
 drivers/edac/amd64_edac.c                   | 10 +++-
 drivers/gpio/gpio-tps65912.c                | 14 ++++--
 drivers/gpio/gpiolib-of.c                   |  9 ++--
 drivers/hid/i2c-hid/i2c-hid.c               |  5 +-
 drivers/md/raid1.c                          |  5 +-
 drivers/md/raid5.c                          |  3 +-
 drivers/media/usb/dvb-usb-v2/lmedm04.c      |  7 +++
 drivers/media/usb/em28xx/em28xx-audio.c     |  4 +-
 drivers/media/usb/em28xx/em28xx-dvb.c       |  2 +-
 drivers/media/usb/em28xx/em28xx-input.c     |  2 +-
 drivers/media/usb/em28xx/em28xx-video.c     |  2 +-
 drivers/mmc/host/sdhci-pxav3.c              |  4 +-
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |  5 +-
 drivers/net/wireless/iwlwifi/mvm/tx.c       |  5 ++
 drivers/net/wireless/iwlwifi/pcie/tx.c      |  7 ++-
 drivers/pci/pci-driver.c                    |  2 +-
 drivers/pci/rom.c                           |  7 +--
 drivers/power/88pm860x_charger.c            |  1 +
 drivers/power/bq24190_charger.c             |  2 +-
 drivers/power/gpio-charger.c                |  4 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.c |  3 +-
 drivers/target/iscsi/iscsi_target_tq.c      | 28 ++---------
 drivers/tty/pty.c                           |  3 ++
 drivers/tty/serial/atmel_serial.c           |  4 +-
 drivers/tty/vt/vt.c                         |  4 +-
 drivers/usb/core/buffer.c                   | 26 ++++++----
 drivers/usb/core/hcd.c                      | 16 +++---
 drivers/usb/core/usb.c                      |  1 +
 drivers/usb/serial/cp210x.c                 |  1 +
 drivers/xen/manage.c                        |  8 ++-
 fs/binfmt_elf.c                             |  5 +-
 fs/btrfs/ctree.c                            | 17 ++-----
 fs/btrfs/disk-io.c                          | 11 ++++-
 fs/btrfs/tree-log.c                         | 11 ++++-
 fs/jffs2/scan.c                             |  5 ++
 fs/nfs/callback.c                           |  8 +--
 fs/nfs/callback_xdr.c                       |  4 +-
 fs/xfs/xfs_buf_item.c                       |  4 ++
 fs/xfs/xfs_inode.c                          |  2 +
 fs/xfs/xfs_qm.c                             |  5 ++
 fs/xfs/xfs_trans.c                          |  1 +
 include/linux/fsnotify.h                    |  6 ++-
 include/linux/usb/hcd.h                     |  1 +
 kernel/debug/kdb/kdb_main.c                 |  2 +-
 kernel/time/ntp.c                           | 10 ++--
 kernel/trace/trace.c                        |  2 +-
 mm/hugetlb.c                                |  2 +
 sound/pci/riptide/riptide.c                 | 27 +++++++---
 sound/pci/rme9652/hdspm.c                   |  6 +++
 82 files changed, 398 insertions(+), 180 deletions(-)

[PATCH 3.14 01/73] Bluetooth: ath3k: workaround the compatibility issue with xHCI controller

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adam Lee <adam.lee@canonical.com>

commit c561a5753dd631920c4459a067d22679b3d110d6 upstream.

BugLink: https://bugs.launchpad.net/bugs/1400215

ath3k devices fail to load firmwares on xHCI buses, but work well on
EHCI, this might be a compatibility issue between xHCI and ath3k chips.
As my testing result, those chips will work on xHCI buses again with
this patch.

This workaround is from Qualcomm, they also did some workarounds in
Windows driver.

Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/ath3k.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -157,6 +157,8 @@ static const struct usb_device_id ath3k_
 #define USB_REQ_DFU_DNLOAD	1
 #define BULK_SIZE		4096
 #define FW_HDR_SIZE		20
+#define TIMEGAP_USEC_MIN	50
+#define TIMEGAP_USEC_MAX	100
 
 static int ath3k_load_firmware(struct usb_device *udev,
 				const struct firmware *firmware)
@@ -187,6 +189,9 @@ static int ath3k_load_firmware(struct us
 	count -= 20;
 
 	while (count) {
+		/* workaround the compatibility issue with xHCI controller*/
+		usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
+
 		size = min_t(uint, count, BULK_SIZE);
 		pipe = usb_sndbulkpipe(udev, 0x02);
 		memcpy(send_buf, firmware->data + sent, size);
@@ -283,6 +288,9 @@ static int ath3k_load_fwfile(struct usb_
 	count -= size;
 
 	while (count) {
+		/* workaround the compatibility issue with xHCI controller*/
+		usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
+
 		size = min_t(uint, count, BULK_SIZE);
 		pipe = usb_sndbulkpipe(udev, 0x02);
 

[PATCH 3.14 02/73] xfs: ensure buffer types are set correctly

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chinner <dchinner@redhat.com>

commit 0d612fb570b71ea2e49554a770cff4c489018b2c upstream.

Jan Kara reported that log recovery was finding buffers with invalid
types in them. This should not happen, and indicates a bug in the
logging of buffers. To catch this, add asserts to the buffer
formatting code to ensure that the buffer type is in range when the
transaction is committed.

We don't set a type on buffers being marked stale - they are not
going to get replayed, the format item exists only for recovery to
be able to prevent replay of the buffer, so the type does not
matter. Hence that needs special casing here.

Reported-by: Jan Kara <jack@suse.cz>
Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_buf_item.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -319,6 +319,10 @@ xfs_buf_item_format(
 	ASSERT(atomic_read(&bip->bli_refcount) > 0);
 	ASSERT((bip->bli_flags & XFS_BLI_LOGGED) ||
 	       (bip->bli_flags & XFS_BLI_STALE));
+	ASSERT((bip->bli_flags & XFS_BLI_STALE) ||
+	       (xfs_blft_from_flags(&bip->__bli_format) > XFS_BLFT_UNKNOWN_BUF
+	        && xfs_blft_from_flags(&bip->__bli_format) < XFS_BLFT_MAX_BUF));
+
 
 	/*
 	 * If it is an inode buffer, transfer the in-memory state to the

[PATCH 3.14 03/73] xfs: inode unlink does not set AGI buffer type

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chinner <dchinner@redhat.com>

commit f19b872b086711bb4b22c3a0f52f16aa920bcc61 upstream.

This leads to log recovery throwing errors like:

XFS (md0): Mounting V5 Filesystem
XFS (md0): Starting recovery (logdev: internal)
XFS (md0): Unknown buffer type 0!
XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1
ffff8800ffc53800: 58 41 47 49 .....

Which is the AGI buffer magic number.

Ensure that we set the type appropriately in both unlink list
addition and removal.

Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_inode.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1946,6 +1946,7 @@ xfs_iunlink(
 	agi->agi_unlinked[bucket_index] = cpu_to_be32(agino);
 	offset = offsetof(xfs_agi_t, agi_unlinked) +
 		(sizeof(xfs_agino_t) * bucket_index);
+	xfs_trans_buf_set_type(tp, agibp, XFS_BLFT_AGI_BUF);
 	xfs_trans_log_buf(tp, agibp, offset,
 			  (offset + sizeof(xfs_agino_t) - 1));
 	return 0;
@@ -2037,6 +2038,7 @@ xfs_iunlink_remove(
 		agi->agi_unlinked[bucket_index] = cpu_to_be32(next_agino);
 		offset = offsetof(xfs_agi_t, agi_unlinked) +
 			(sizeof(xfs_agino_t) * bucket_index);
+		xfs_trans_buf_set_type(tp, agibp, XFS_BLFT_AGI_BUF);
 		xfs_trans_log_buf(tp, agibp, offset,
 				  (offset + sizeof(xfs_agino_t) - 1));
 	} else {

[PATCH 3.14 04/73] xfs: set superblock buffer type correctly

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Chinner <dchinner@redhat.com>

commit 3443a3bca54588f43286b725d8648d33a38c86f1 upstream.

When the superblock is modified in a transaction, the commonly
modified fields are not actually copied to the superblock buffer to
avoid the buffer lock becoming a serialisation point. However, there
are some other operations that modify the superblock fields within
the transaction that don't directly log to the superblock but rely
on the changes to be applied during the transaction commit (to
minimise the buffer lock hold time).

When we do this, we fail to mark the buffer log item as being a
superblock buffer and that can lead to the buffer not being marked
with the corect type in the log and hence causing recovery issues.
Fix it by setting the type correctly, similar to xfs_mod_sb()...

Tested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_trans.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -474,6 +474,7 @@ xfs_trans_apply_sb_deltas(
 		whole = 1;
 	}
 
+	xfs_trans_buf_set_type(tp, bp, XFS_BLFT_SB_BUF);
 	if (whole)
 		/*
 		 * Log the whole thing, the fields are noncontiguous.

[PATCH 3.14 05/73] fsnotify: fix handling of renames in audit

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 6ee8e25fc3e916193bce4ebb43d5439e1e2144ab upstream.

Commit e9fd702a58c4 ("audit: convert audit watches to use fsnotify
instead of inotify") broke handling of renames in audit.  Audit code
wants to update inode number of an inode corresponding to watched name
in a directory.  When something gets renamed into a directory to a
watched name, inotify previously passed moved inode to audit code
however new fsnotify code passes directory inode where the change
happened.  That confuses audit and it starts watching parent directory
instead of a file in a directory.

This can be observed for example by doing:

  cd /tmp
  touch foo bar
  auditctl -w /tmp/foo
  touch foo
  mv bar foo
  touch foo

In audit log we see events like:

  type=CONFIG_CHANGE msg=audit(1423563584.155:90): auid=1000 ses=2 op="updated rules" path="/tmp/foo" key=(null) list=4 res=1
  ...
  type=PATH msg=audit(1423563584.155:91): item=2 name="bar" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE
  type=PATH msg=audit(1423563584.155:91): item=3 name="foo" inode=1046842 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE
  type=PATH msg=audit(1423563584.155:91): item=4 name="foo" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=CREATE
  ...

and that's it - we see event for the first touch after creating the
audit rule, we see events for rename but we don't see any event for the
last touch.  However we start seeing events for unrelated stuff
happening in /tmp.

Fix the problem by passing moved inode as data in the FS_MOVED_FROM and
FS_MOVED_TO events instead of the directory where the change happens.
This doesn't introduce any new problems because noone besides
audit_watch.c cares about the passed value:

  fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events.
  fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all.
  fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH.
  kernel/audit_tree.c doesn't care about passed 'data' at all.
  kernel/audit_watch.c expects moved inode as 'data'.

Fixes: e9fd702a58c49db ("audit: convert audit watches to use fsnotify instead of inotify")
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/fsnotify.h |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -101,8 +101,10 @@ static inline void fsnotify_move(struct
 		new_dir_mask |= FS_ISDIR;
 	}
 
-	fsnotify(old_dir, old_dir_mask, old_dir, FSNOTIFY_EVENT_INODE, old_name, fs_cookie);
-	fsnotify(new_dir, new_dir_mask, new_dir, FSNOTIFY_EVENT_INODE, new_name, fs_cookie);
+	fsnotify(old_dir, old_dir_mask, source, FSNOTIFY_EVENT_INODE, old_name,
+		 fs_cookie);
+	fsnotify(new_dir, new_dir_mask, source, FSNOTIFY_EVENT_INODE, new_name,
+		 fs_cookie);
 
 	if (target)
 		fsnotify_link_count(target);

[PATCH 3.14 06/73] iwlwifi: pcie: disable the SCD_BASE_ADDR when we resume from WoWLAN

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit cd8f438405032ac8ff88bd8f2eca5e0c0063b14b upstream.

The base address of the scheduler in the device's memory
(SRAM) comes from two different sources. The periphery
register and the alive notification from the firmware.
We have a check in iwl_pcie_tx_start that ensures that
they are the same.
When we resume from WoWLAN, the firmware may have crashed
for whatever reason. In that case, the whole device may be
reset which means that the periphery register will hold a
meaningless value. When we come to compare
trans_pcie->scd_base_addr (which really holds the value we
had when we loaded the WoWLAN firmware upon suspend) and
the current value of the register, we don't see a match
unsurprisingly.
Trick the check to avoid a loud yet harmless WARN.
Note that when the WoWLAN has crashed, we will see that
in iwl_trans_pcie_d3_resume which will let the op_mode
know. Once the op_mode is informed that the WowLAN firmware
has crashed, it can't do much besides resetting the whole
device.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/pcie/tx.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -729,7 +729,12 @@ void iwl_trans_pcie_tx_reset(struct iwl_
 	iwl_write_direct32(trans, FH_KW_MEM_ADDR_REG,
 			   trans_pcie->kw.dma >> 4);
 
-	iwl_pcie_tx_start(trans, trans_pcie->scd_base_addr);
+	/*
+	 * Send 0 as the scd_base_addr since the device may have be reset
+	 * while we were in WoWLAN in which case SCD_SRAM_BASE_ADDR will
+	 * contain garbage.
+	 */
+	iwl_pcie_tx_start(trans, 0);
 }
 
 /*

[PATCH 3.14 07/73] iwlwifi: mvm: validate tid and sta_id in ba_notif

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eyal Shapira <eyal@wizery.com>

commit 2cee4762c528a9bd2cdff793197bf591a2196c11 upstream.

These are coming from the FW and are used to access arrays.
Bad values can cause an out of bounds access so discard
such ba_notifs and warn.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/mvm/tx.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/wireless/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tx.c
@@ -835,6 +835,11 @@ int iwl_mvm_rx_ba_notif(struct iwl_mvm *
 	sta_id = ba_notif->sta_id;
 	tid = ba_notif->tid;
 
+	if (WARN_ONCE(sta_id >= IWL_MVM_STATION_COUNT ||
+		      tid >= IWL_MAX_TID_COUNT,
+		      "sta_id %d tid %d", sta_id, tid))
+		return 0;
+
 	rcu_read_lock();
 
 	sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);

[PATCH 3.14 08/73] iwlwifi: mvm: fix failure path when power_update fails in add_interface

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luciano Coelho <luciano.coelho@intel.com>

commit fd66fc1cafd72ddf27dbec3a5e29e99839d1bc84 upstream.

When iwl_mvm_power_update_mac() is called, we have already added the
mac context, so if this call fails we should remove the mac.

Fixes: commit e5e7aa8e2561 ('iwlwifi: mvm: refactor power code')
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -597,7 +597,7 @@ static int iwl_mvm_mac_add_interface(str
 
 	ret = iwl_mvm_mac_ctxt_add(mvm, vif);
 	if (ret)
-		goto out_release;
+		goto out_remove_mac;
 
 	iwl_mvm_power_disable(mvm, vif);
 

[PATCH 3.14 09/73] iwlwifi: mvm: always use mac color zero

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Luciano Coelho <luciano.coelho@intel.com>

commit 5523d11cc46393a1e61b7ef4a0b2d4e7ed9521e4 upstream.

We don't really need to use different mac colors when adding mac
contexts, because they're not used anywhere.  In fact, the firmware
doesn't accept 255 as a valid color, so we get into a SYSASSERT 0x3401
when we reach that.

Remove the color increment to use always zero and avoid reaching 255.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -410,9 +410,6 @@ static void iwl_mvm_cleanup_iterator(voi
 	mvmvif->uploaded = false;
 	mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT;
 
-	/* does this make sense at all? */
-	mvmvif->color++;
-
 	spin_lock_bh(&mvm->time_event_lock);
 	iwl_mvm_te_clear_data(mvm, &mvmvif->time_event_data);
 	spin_unlock_bh(&mvm->time_event_lock);

[PATCH 3.14 10/73] HID: i2c-hid: Limit reads to wMaxInputLength bytes for input events

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Forshee <seth.forshee@canonical.com>

commit 6d00f37e49d95e640a3937a4a1ae07dbe92a10cb upstream.

d1c7e29e8d27 (HID: i2c-hid: prevent buffer overflow in early IRQ)
changed hid_get_input() to read ihid->bufsize bytes, which can be
more than wMaxInputLength. This is the case with the Dell XPS 13
9343, and it is causing events to be missed. In some cases the
missed events are releases, which can cause the cursor to jump or
freeze, among other problems. Limit the number of bytes read to
min(wMaxInputLength, ihid->bufsize) to prevent such problems.

Fixes: d1c7e29e8d27 "HID: i2c-hid: prevent buffer overflow in early IRQ"
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/i2c-hid/i2c-hid.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -356,7 +356,10 @@ static int i2c_hid_hwreset(struct i2c_cl
 static void i2c_hid_get_input(struct i2c_hid *ihid)
 {
 	int ret, ret_size;
-	int size = ihid->bufsize;
+	int size = le16_to_cpu(ihid->hdesc.wMaxInputLength);
+
+	if (size > ihid->bufsize)
+		size = ihid->bufsize;
 
 	ret = i2c_master_recv(ihid->client, ihid->inbuf, size);
 	if (ret != size) {

[PATCH 3.14 11/73] PCI: Generate uppercase hex for modalias var in uevent

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>

commit 145b3fe579db66fbe999a2bc3fd5b63dffe9636d upstream.

Some implementations of modprobe fail to load the driver for a PCI device
automatically because the "interface" part of the modalias from the kernel
is lowercase, and the modalias from file2alias is uppercase.

The "interface" is the low-order byte of the Class Code, defined in PCI
r3.0, Appendix D.  Most interface types defined in the spec do not use
alpha characters, so they won't be affected.  For example, 00h, 01h, 10h,
20h, etc. are unaffected.

Print the "interface" byte of the Class Code in uppercase hex, as we
already do for the Vendor ID, Device ID, Class, etc.

Commit 89ec3dcf17fd ("PCI: Generate uppercase hex for modalias interface
class") fixed only half of the problem.  Some udev implementations rely on
the uevent file and not the modalias file.

Fixes: d1ded203adf1 ("PCI: add MODALIAS to hotplug event for pci devices")
Fixes: 89ec3dcf17fd ("PCI: Generate uppercase hex for modalias interface class")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci-driver.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -1324,7 +1324,7 @@ static int pci_uevent(struct device *dev
 	if (add_uevent_var(env, "PCI_SLOT_NAME=%s", pci_name(pdev)))
 		return -ENOMEM;
 
-	if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x",
+	if (add_uevent_var(env, "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02X",
 			   pdev->vendor, pdev->device,
 			   pdev->subsystem_vendor, pdev->subsystem_device,
 			   (u8)(pdev->class >> 16), (u8)(pdev->class >> 8),

[PATCH 3.14 13/73] cpufreq: Set cpufreq_cpu_data to NULL before putting kobject

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 6ffae8c06fab058d6c3f8ecb7f921327721034e7 upstream.

In __cpufreq_remove_dev_finish(), per-cpu 'cpufreq_cpu_data' needs
to be cleared before calling kobject_put(&policy->kobj) and under
cpufreq_driver_lock. Otherwise, if someone else calls cpufreq_cpu_get()
in parallel with it, they can obtain a non-NULL policy from that after
kobject_put(&policy->kobj) was executed.

Consider this case:

Thread A				Thread B
cpufreq_cpu_get()
  acquire cpufreq_driver_lock
  read-per-cpu cpufreq_cpu_data
					kobject_put(&policy->kobj);
  kobject_get(&policy->kobj);
					...
					per_cpu(&cpufreq_cpu_data, cpu) = NULL

And this will result in a warning like this one:

 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 4 at include/linux/kref.h:47
 kobject_get+0x41/0x50()
 Modules linked in: acpi_cpufreq(+) nfsd auth_rpcgss nfs_acl
 lockd grace sunrpc xfs libcrc32c sd_mod ixgbe igb mdio ahci hwmon
 ...
 Call Trace:
  [<ffffffff81661b14>] dump_stack+0x46/0x58
  [<ffffffff81072b61>] warn_slowpath_common+0x81/0xa0
  [<ffffffff81072c7a>] warn_slowpath_null+0x1a/0x20
  [<ffffffff812e16d1>] kobject_get+0x41/0x50
  [<ffffffff815262a5>] cpufreq_cpu_get+0x75/0xc0
  [<ffffffff81527c3e>] cpufreq_update_policy+0x2e/0x1f0
  [<ffffffff810b8cb2>] ? up+0x32/0x50
  [<ffffffff81381aa9>] ? acpi_ns_get_node+0xcb/0xf2
  [<ffffffff81381efd>] ? acpi_evaluate_object+0x22c/0x252
  [<ffffffff813824f6>] ? acpi_get_handle+0x95/0xc0
  [<ffffffff81360967>] ? acpi_has_method+0x25/0x40
  [<ffffffff81391e08>] acpi_processor_ppc_has_changed+0x77/0x82
  [<ffffffff81089566>] ? move_linked_works+0x66/0x90
  [<ffffffff8138e8ed>] acpi_processor_notify+0x58/0xe7
  [<ffffffff8137410c>] acpi_ev_notify_dispatch+0x44/0x5c
  [<ffffffff8135f293>] acpi_os_execute_deferred+0x15/0x22
  [<ffffffff8108c910>] process_one_work+0x160/0x410
  [<ffffffff8108d05b>] worker_thread+0x11b/0x520
  [<ffffffff8108cf40>] ? rescuer_thread+0x380/0x380
  [<ffffffff81092421>] kthread+0xe1/0x100
  [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0
  [<ffffffff81669ebc>] ret_from_fork+0x7c/0xb0
  [<ffffffff81092340>] ? kthread_create_on_node+0x1b0/0x1b0
 ---[ end trace 89e66eb9795efdf7 ]---

The actual code flow is as follows:

 Thread A: Workqueue: kacpi_notify

 acpi_processor_notify()
   acpi_processor_ppc_has_changed()
         cpufreq_update_policy()
           cpufreq_cpu_get()
             kobject_get()

 Thread B: xenbus_thread()

 xenbus_thread()
   msg->u.watch.handle->callback()
     handle_vcpu_hotplug_event()
       vcpu_hotplug()
         cpu_down()
           __cpu_notify(CPU_POST_DEAD..)
             cpufreq_cpu_callback()
               __cpufreq_remove_dev_finish()
                 cpufreq_policy_put_kobj()
                   kobject_put()

cpufreq_cpu_get() gets the policy from per-cpu variable cpufreq_cpu_data
under cpufreq_driver_lock, and once it gets a valid policy it expects it
to not be freed until cpufreq_cpu_put() is called.

But the race happens when another thread puts the kobject first and updates
cpufreq_cpu_data before or later. And so the first thread gets a valid policy
structure and before it does kobject_get() on it, the second one has already
done kobject_put().

Fix this by setting cpufreq_cpu_data to NULL before putting the kobject and that
too under locks.

Reported-by: Ethan Zhao <ethan.zhao@oracle.com>
Reported-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/cpufreq.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1365,9 +1365,10 @@ static int __cpufreq_remove_dev_finish(s
 	unsigned long flags;
 	struct cpufreq_policy *policy;
 
-	read_lock_irqsave(&cpufreq_driver_lock, flags);
+	write_lock_irqsave(&cpufreq_driver_lock, flags);
 	policy = per_cpu(cpufreq_cpu_data, cpu);
-	read_unlock_irqrestore(&cpufreq_driver_lock, flags);
+	per_cpu(cpufreq_cpu_data, cpu) = NULL;
+	write_unlock_irqrestore(&cpufreq_driver_lock, flags);
 
 	if (!policy) {
 		pr_debug("%s: No cpu_data found\n", __func__);
@@ -1422,7 +1423,6 @@ static int __cpufreq_remove_dev_finish(s
 		}
 	}
 
-	per_cpu(cpufreq_cpu_data, cpu) = NULL;
 	return 0;
 }
 

[PATCH 3.14 15/73] cpufreq: s3c: remove incorrect __init annotations

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit 61882b63171736571e1139ab5aa929e3bb336016 upstream.

The two functions s3c2416_cpufreq_driver_init and s3c_cpufreq_register
are marked init but are called from a context that might be run after
the __init sections are discarded, as the compiler points out:

WARNING: vmlinux.o(.data+0x1ad9dc): Section mismatch in reference from the variable s3c2416_cpufreq_driver to the function .init.text:s3c2416_cpufreq_driver_init()
WARNING: drivers/built-in.o(.text+0x35b5dc): Section mismatch in reference from the function s3c2410a_cpufreq_add() to the function .init.text:s3c_cpufreq_register()

This removes the __init markings.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/s3c2416-cpufreq.c |    4 ++--
 drivers/cpufreq/s3c24xx-cpufreq.c |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/cpufreq/s3c2416-cpufreq.c
+++ b/drivers/cpufreq/s3c2416-cpufreq.c
@@ -263,7 +263,7 @@ out:
 }
 
 #ifdef CONFIG_ARM_S3C2416_CPUFREQ_VCORESCALE
-static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
+static void s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 {
 	int count, v, i, found;
 	struct cpufreq_frequency_table *freq;
@@ -335,7 +335,7 @@ static struct notifier_block s3c2416_cpu
 	.notifier_call = s3c2416_cpufreq_reboot_notifier_evt,
 };
 
-static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
+static int s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
 {
 	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
 	struct cpufreq_frequency_table *freq;
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -454,7 +454,7 @@ static struct cpufreq_driver s3c24xx_dri
 };
 
 
-int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
 {
 	if (!info || !info->name) {
 		printk(KERN_ERR "%s: failed to pass valid information\n",

[PATCH 3.14 16/73] xen/manage: Fix USB interaction issues when resuming

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ross Lagerwall <ross.lagerwall@citrix.com>

commit 72978b2fe2f2cdf9f319c6c6dcdbe92b38de2be2 upstream.

Commit 61a734d305e1 ("xen/manage: Always freeze/thaw processes when
suspend/resuming") ensured that userspace processes were always frozen
before suspending to reduce interaction issues when resuming devices.
However, freeze_processes() does not freeze kernel threads.  Freeze
kernel threads as well to prevent deadlocks with the khubd thread when
resuming devices.

This is what native suspend and resume does.

Example deadlock:
[ 7279.648010]  [<ffffffff81446bde>] ? xen_poll_irq_timeout+0x3e/0x50
[ 7279.648010]  [<ffffffff81448d60>] xen_poll_irq+0x10/0x20
[ 7279.648010]  [<ffffffff81011723>] xen_lock_spinning+0xb3/0x120
[ 7279.648010]  [<ffffffff810115d1>] __raw_callee_save_xen_lock_spinning+0x11/0x20
[ 7279.648010]  [<ffffffff815620b6>] ? usb_control_msg+0xe6/0x120
[ 7279.648010]  [<ffffffff81747e50>] ? _raw_spin_lock_irq+0x50/0x60
[ 7279.648010]  [<ffffffff8174522c>] wait_for_completion+0xac/0x160
[ 7279.648010]  [<ffffffff8109c520>] ? try_to_wake_up+0x2c0/0x2c0
[ 7279.648010]  [<ffffffff814b60f2>] dpm_wait+0x32/0x40
[ 7279.648010]  [<ffffffff814b6eb0>] device_resume+0x90/0x210
[ 7279.648010]  [<ffffffff814b7d71>] dpm_resume+0x121/0x250
[ 7279.648010]  [<ffffffff8144c570>] ? xenbus_dev_request_and_reply+0xc0/0xc0
[ 7279.648010]  [<ffffffff814b80d5>] dpm_resume_end+0x15/0x30
[ 7279.648010]  [<ffffffff81449fba>] do_suspend+0x10a/0x200
[ 7279.648010]  [<ffffffff8144a2f0>] ? xen_pre_suspend+0x20/0x20
[ 7279.648010]  [<ffffffff8144a1d0>] shutdown_handler+0x120/0x150
[ 7279.648010]  [<ffffffff8144c60f>] xenwatch_thread+0x9f/0x160
[ 7279.648010]  [<ffffffff810ac510>] ? finish_wait+0x80/0x80
[ 7279.648010]  [<ffffffff8108d189>] kthread+0xc9/0xe0
[ 7279.648010]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
[ 7279.648010]  [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0
[ 7279.648010]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80

[ 7441.216287] INFO: task khubd:89 blocked for more than 120 seconds.
[ 7441.219457]       Tainted: G            X 3.13.11-ckt12.kz #1
[ 7441.222176] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 7441.225827] khubd           D ffff88003f433440     0    89      2 0x00000000
[ 7441.229258]  ffff88003ceb9b98 0000000000000046 ffff88003ce83000 0000000000013440
[ 7441.232959]  ffff88003ceb9fd8 0000000000013440 ffff88003cd13000 ffff88003ce83000
[ 7441.236658]  0000000000000286 ffff88003d3e0000 ffff88003ceb9bd0 00000001001aa01e
[ 7441.240415] Call Trace:
[ 7441.241614]  [<ffffffff817442f9>] schedule+0x29/0x70
[ 7441.243930]  [<ffffffff81743406>] schedule_timeout+0x166/0x2c0
[ 7441.246681]  [<ffffffff81075b80>] ? call_timer_fn+0x110/0x110
[ 7441.249339]  [<ffffffff8174357e>] schedule_timeout_uninterruptible+0x1e/0x20
[ 7441.252644]  [<ffffffff81077710>] msleep+0x20/0x30
[ 7441.254812]  [<ffffffff81555f00>] hub_port_reset+0xf0/0x580
[ 7441.257400]  [<ffffffff81558465>] hub_port_init+0x75/0xb40
[ 7441.259981]  [<ffffffff814bb3c9>] ? update_autosuspend+0x39/0x60
[ 7441.262817]  [<ffffffff814bb4f0>] ? pm_runtime_set_autosuspend_delay+0x50/0xa0
[ 7441.266212]  [<ffffffff8155a64a>] hub_thread+0x71a/0x1750
[ 7441.268728]  [<ffffffff810ac510>] ? finish_wait+0x80/0x80
[ 7441.271272]  [<ffffffff81559f30>] ? usb_port_resume+0x670/0x670
[ 7441.274067]  [<ffffffff8108d189>] kthread+0xc9/0xe0
[ 7441.276305]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80
[ 7441.279131]  [<ffffffff8175087c>] ret_from_fork+0x7c/0xb0
[ 7441.281659]  [<ffffffff8108d0c0>] ? flush_kthread_worker+0x80/0x80

Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/manage.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -113,10 +113,16 @@ static void do_suspend(void)
 
 	err = freeze_processes();
 	if (err) {
-		pr_err("%s: freeze failed %d\n", __func__, err);
+		pr_err("%s: freeze processes failed %d\n", __func__, err);
 		goto out;
 	}
 
+	err = freeze_kernel_threads();
+	if (err) {
+		pr_err("%s: freeze kernel threads failed %d\n", __func__, err);
+		goto out_thaw;
+	}
+
 	err = dpm_suspend_start(PMSG_FREEZE);
 	if (err) {
 		pr_err("%s: dpm_suspend_start %d\n", __func__, err);

[PATCH 3.14 17/73] [media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 15e1ce33182d1d5dbd8efe8d382b9352dc857527 upstream.

A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK
but the endpoint otheriwse functions as interrupt.

Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb-v2/lmedm04.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -350,6 +350,7 @@ static int lme2510_int_read(struct dvb_u
 {
 	struct dvb_usb_device *d = adap_to_d(adap);
 	struct lme2510_state *lme_int = adap_to_priv(adap);
+	struct usb_host_endpoint *ep;
 
 	lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
 
@@ -371,6 +372,12 @@ static int lme2510_int_read(struct dvb_u
 				adap,
 				8);
 
+	/* Quirk of pipe reporting PIPE_BULK but behaves as interrupt */
+	ep = usb_pipe_endpoint(d->udev, lme_int->lme_urb->pipe);
+
+	if (usb_endpoint_type(&ep->desc) == USB_ENDPOINT_XFER_BULK)
+		lme_int->lme_urb->pipe = usb_rcvbulkpipe(d->udev, 0xa),
+
 	lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
 	usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);

[PATCH 3.14 18/73] ALSA: off by one bug in snd_riptide_joystick_probe()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit e4940626defdf6c92da1052ad3f12741c1a28c90 upstream.

The problem here is that we check:

	if (dev >= SNDRV_CARDS)

Then we increment "dev".

       if (!joystick_port[dev++])

Then we use it as an offset into a array with SNDRV_CARDS elements.

	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {

This has 3 effects:
1) If you use the module option to specify the joystick port then it has
   to be shifted one space over.
2) The wrong error message will be printed on failure if you have over
   32 cards.
3) Static checkers will correctly complain that are off by one.

Fixes: db1005ec6ff8 ('ALSA: riptide - Fix joystick resource handling')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/riptide/riptide.c |   27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -2032,32 +2032,43 @@ snd_riptide_joystick_probe(struct pci_de
 {
 	static int dev;
 	struct gameport *gameport;
+	int ret;
 
 	if (dev >= SNDRV_CARDS)
 		return -ENODEV;
+
 	if (!enable[dev]) {
-		dev++;
-		return -ENOENT;
+		ret = -ENOENT;
+		goto inc_dev;
 	}
 
-	if (!joystick_port[dev++])
-		return 0;
+	if (!joystick_port[dev]) {
+		ret = 0;
+		goto inc_dev;
+	}
 
 	gameport = gameport_allocate_port();
-	if (!gameport)
-		return -ENOMEM;
+	if (!gameport) {
+		ret = -ENOMEM;
+		goto inc_dev;
+	}
 	if (!request_region(joystick_port[dev], 8, "Riptide gameport")) {
 		snd_printk(KERN_WARNING
 			   "Riptide: cannot grab gameport 0x%x\n",
 			   joystick_port[dev]);
 		gameport_free_port(gameport);
-		return -EBUSY;
+		ret = -EBUSY;
+		goto inc_dev;
 	}
 
 	gameport->io = joystick_port[dev];
 	gameport_register_port(gameport);
 	pci_set_drvdata(pci, gameport);
-	return 0;
+
+	ret = 0;
+inc_dev:
+	dev++;
+	return ret;
 }
 
 static void snd_riptide_joystick_remove(struct pci_dev *pci)

[PATCH 3.14 19/73] ALSA: hdspm - Constrain periods to 2 on older cards

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Knoth <adi@drcomp.erfurt.thur.de>

commit f0153c3d948c1764f6c920a0675d86fc1d75813e upstream.

RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period
sizes of 32-4096, this translates to 4-512 periods.

The older RME cards have a variable buffer size but require exactly two
periods.

This patch enforces nperiods=2 on those cards.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/rme9652/hdspm.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -6102,6 +6102,9 @@ static int snd_hdspm_playback_open(struc
 		snd_pcm_hw_constraint_minmax(runtime,
 					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
 					     64, 8192);
+		snd_pcm_hw_constraint_minmax(runtime,
+					     SNDRV_PCM_HW_PARAM_PERIODS,
+					     2, 2);
 		break;
 	}
 
@@ -6176,6 +6179,9 @@ static int snd_hdspm_capture_open(struct
 		snd_pcm_hw_constraint_minmax(runtime,
 					     SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
 					     64, 8192);
+		snd_pcm_hw_constraint_minmax(runtime,
+					     SNDRV_PCM_HW_PARAM_PERIODS,
+					     2, 2);
 		break;
 	}
 

[PATCH 3.14 20/73] power_supply: 88pm860x: Fix leaked power supply on probe fail

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit 24727b45b484e8937dcde53fa8d1aa70ac30ec0c upstream.

Driver forgot to unregister power supply if request_threaded_irq()
failed in probe(). In such case the memory associated with power supply
leaked.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: a830d28b48bf ("power_supply: Enable battery-charger for 88pm860x")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/88pm860x_charger.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/power/88pm860x_charger.c
+++ b/drivers/power/88pm860x_charger.c
@@ -711,6 +711,7 @@ static int pm860x_charger_probe(struct p
 	return 0;
 
 out_irq:
+	power_supply_unregister(&info->usb);
 	while (--i >= 0)
 		free_irq(info->irq[i], info);
 out:

[PATCH 3.14 21/73] power: bq24190: Fix ignored supplicants

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit 478913fdbdfd4a781d91c993eb86838620fe7421 upstream.

The driver mismatched 'num_supplicants' with 'num_supplies' of
power_supply structure.

It provided list of supplicants (power_supply.supplied_to) but did
not set the number of supplicants. Instead it set the num_supplies which
is used when iterating over number of supplies (power_supply.supplied_from).

As a result the list of supplicants was ignored by core because its size
was 0.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: d7bf353fd0aa ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/bq24190_charger.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/bq24190_charger.c
+++ b/drivers/power/bq24190_charger.c
@@ -929,7 +929,7 @@ static void bq24190_charger_init(struct
 	charger->properties = bq24190_charger_properties;
 	charger->num_properties = ARRAY_SIZE(bq24190_charger_properties);
 	charger->supplied_to = bq24190_charger_supplied_to;
-	charger->num_supplies = ARRAY_SIZE(bq24190_charger_supplied_to);
+	charger->num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to);
 	charger->get_property = bq24190_charger_get_property;
 	charger->set_property = bq24190_charger_set_property;
 	charger->property_is_writeable = bq24190_charger_property_is_writeable;

[PATCH 3.14 22/73] power: gpio-charger: balance enable/disable_irq_wake calls

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

commit faeed51bb65ce0241052d8dc24ac331ade12e976 upstream.

enable_irq_wakeup returns 0 in case it correctly enabled the IRQ to
generate the wakeup event (and thus resume should call disable_irq_wake).
Currently gpio-charger driver has this logic inverted. Correct that thus
correcting enable/disable_irq_wake() calls balance.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/gpio-charger.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/power/gpio-charger.c
+++ b/drivers/power/gpio-charger.c
@@ -168,7 +168,7 @@ static int gpio_charger_suspend(struct d
 
 	if (device_may_wakeup(dev))
 		gpio_charger->wakeup_enabled =
-			enable_irq_wake(gpio_charger->irq);
+			!enable_irq_wake(gpio_charger->irq);
 
 	return 0;
 }
@@ -178,7 +178,7 @@ static int gpio_charger_resume(struct de
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_charger *gpio_charger = platform_get_drvdata(pdev);
 
-	if (gpio_charger->wakeup_enabled)
+	if (device_may_wakeup(dev) && gpio_charger->wakeup_enabled)
 		disable_irq_wake(gpio_charger->irq);
 	power_supply_changed(&gpio_charger->charger);
 

[PATCH 3.14 23/73] megaraid_sas: disable interrupt_mask before enabling hardware interrupts

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Sumit.Saxena@avagotech.com" <Sumit.Saxena@avagotech.com>

commit c2ced1719a1b903350955a511e1666e6d05a7f5b upstream.

Update driver "mask_interrupts" before enable/disable hardware interrupt
in order to avoid missing interrupts because of "mask_interrupts" still
set to 1 and hardware interrupts are enabled.

Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com>
Signed-off-by: Chaitra Basappa <chaitra.basappa@avagotech.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/megaraid/megaraid_sas_fusion.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -92,6 +92,8 @@ megasas_enable_intr_fusion(struct megasa
 {
 	struct megasas_register_set __iomem *regs;
 	regs = instance->reg_set;
+
+	instance->mask_interrupts = 0;
 	/* For Thunderbolt/Invader also clear intr on enable */
 	writel(~0, &regs->outbound_intr_status);
 	readl(&regs->outbound_intr_status);
@@ -100,7 +102,6 @@ megasas_enable_intr_fusion(struct megasa
 
 	/* Dummy readl to force pci flush */
 	readl(&regs->outbound_intr_mask);
-	instance->mask_interrupts = 0;
 }
 
 /**

[PATCH 3.14 26/73] mmc: sdhci-pxav3: fix setting of pdata->clk_delay_cycles

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jisheng Zhang <jszhang@marvell.com>

commit 14460dbaf7a5a0488963fdb8232ad5c8a8cca7b7 upstream.

Current code checks "clk_delay_cycles > 0" to know whether the optional
"mrvl,clk_delay_cycles" is set or not. But of_property_read_u32() doesn't
touch clk_delay_cycles if the property is not set. And type of
clk_delay_cycles is u32, so we may always set pdata->clk_delay_cycles as a
random value.

This patch fix this problem by check the return value of of_property_read_u32()
to know whether the optional clk-delay-cycles is set or not.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-pxav3.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -201,8 +201,8 @@ static struct sdhci_pxa_platdata *pxav3_
 	if (!pdata)
 		return NULL;
 
-	of_property_read_u32(np, "mrvl,clk-delay-cycles", &clk_delay_cycles);
-	if (clk_delay_cycles > 0)
+	if (!of_property_read_u32(np, "mrvl,clk-delay-cycles",
+				  &clk_delay_cycles))
 		pdata->clk_delay_cycles = clk_delay_cycles;
 
 	return pdata;

[PATCH 3.14 27/73] nfs: dont call blocking operations while !TASK_RUNNING

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@primarydata.com>

commit 6ffa30d3f734d4f6b478081dfc09592021028f90 upstream.

Bruce reported seeing this warning pop when mounting using v4.1:

     ------------[ cut here ]------------
     WARNING: CPU: 1 PID: 1121 at kernel/sched/core.c:7300 __might_sleep+0xbd/0xd0()
    do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810ff58f>] prepare_to_wait+0x2f/0x90
    Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer ppdev joydev snd virtio_console virtio_balloon pcspkr serio_raw parport_pc parport pvpanic floppy soundcore i2c_piix4 virtio_blk virtio_net qxl drm_kms_helper ttm drm virtio_pci virtio_ring ata_generic virtio pata_acpi
    CPU: 1 PID: 1121 Comm: nfsv4.1-svc Not tainted 3.19.0-rc4+ #25
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153950- 04/01/2014
     0000000000000000 000000004e5e3f73 ffff8800b998fb48 ffffffff8186ac78
     0000000000000000 ffff8800b998fba0 ffff8800b998fb88 ffffffff810ac9da
     ffff8800b998fb68 ffffffff81c923e7 00000000000004d9 0000000000000000
    Call Trace:
     [<ffffffff8186ac78>] dump_stack+0x4c/0x65
     [<ffffffff810ac9da>] warn_slowpath_common+0x8a/0xc0
     [<ffffffff810aca65>] warn_slowpath_fmt+0x55/0x70
     [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
     [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90
     [<ffffffff810dd2ad>] __might_sleep+0xbd/0xd0
     [<ffffffff8124c973>] kmem_cache_alloc_trace+0x243/0x430
     [<ffffffff810d941e>] ? groups_alloc+0x3e/0x130
     [<ffffffff810d941e>] groups_alloc+0x3e/0x130
     [<ffffffffa0301b1e>] svcauth_unix_accept+0x16e/0x290 [sunrpc]
     [<ffffffffa0300571>] svc_authenticate+0xe1/0xf0 [sunrpc]
     [<ffffffffa02fc564>] svc_process_common+0x244/0x6a0 [sunrpc]
     [<ffffffffa02fd044>] bc_svc_process+0x1c4/0x260 [sunrpc]
     [<ffffffffa03d5478>] nfs41_callback_svc+0x128/0x1f0 [nfsv4]
     [<ffffffff810ff970>] ? wait_woken+0xc0/0xc0
     [<ffffffffa03d5350>] ? nfs4_callback_svc+0x60/0x60 [nfsv4]
     [<ffffffff810d45bf>] kthread+0x11f/0x140
     [<ffffffff810ea815>] ? local_clock+0x15/0x30
     [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
     [<ffffffff81874bfc>] ret_from_fork+0x7c/0xb0
     [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250
    ---[ end trace 675220a11e30f4f2 ]---

nfs41_callback_svc does most of its work while in TASK_INTERRUPTIBLE,
which is just wrong. Fix that by finishing the wait immediately if we've
found that the list has something on it.

Also, we don't expect this kthread to accept signals, so we should be
using a TASK_UNINTERRUPTIBLE sleep instead. That however, opens us up
hung task warnings from the watchdog, so have the schedule_timeout
wake up every 60s if there's no callback activity.

Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/callback.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -128,22 +128,24 @@ nfs41_callback_svc(void *vrqstp)
 		if (try_to_freeze())
 			continue;
 
-		prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_INTERRUPTIBLE);
+		prepare_to_wait(&serv->sv_cb_waitq, &wq, TASK_UNINTERRUPTIBLE);
 		spin_lock_bh(&serv->sv_cb_lock);
 		if (!list_empty(&serv->sv_cb_list)) {
 			req = list_first_entry(&serv->sv_cb_list,
 					struct rpc_rqst, rq_bc_list);
 			list_del(&req->rq_bc_list);
 			spin_unlock_bh(&serv->sv_cb_lock);
+			finish_wait(&serv->sv_cb_waitq, &wq);
 			dprintk("Invoking bc_svc_process()\n");
 			error = bc_svc_process(serv, req, rqstp);
 			dprintk("bc_svc_process() returned w/ error code= %d\n",
 				error);
 		} else {
 			spin_unlock_bh(&serv->sv_cb_lock);
-			schedule();
+			/* schedule_timeout to game the hung task watchdog */
+			schedule_timeout(60 * HZ);
+			finish_wait(&serv->sv_cb_waitq, &wq);
 		}
-		finish_wait(&serv->sv_cb_waitq, &wq);
 	}
 	return 0;
 }

[PATCH 3.14 28/73] MIPS: KVM: Deliver guest interrupts after local_irq_disable()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 044f0f03eca0110e1835b2ea038a484b93950328 upstream.

When about to run the guest, deliver guest interrupts after disabling
host interrupts. This should prevent an hrtimer interrupt from being
handled after delivering guest interrupts, and therefore not delivering
the guest timer interrupt until after the next guest exit.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kvm/kvm_mips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -418,11 +418,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v
 		vcpu->mmio_needed = 0;
 	}
 
+	local_irq_disable();
 	/* Check if we have any exceptions/interrupts pending */
 	kvm_mips_deliver_interrupts(vcpu,
 				    kvm_read_c0_guest_cause(vcpu->arch.cop0));
 
-	local_irq_disable();
 	kvm_guest_enter();
 
 	r = __kvm_mips_vcpu_run(run, vcpu);

[PATCH 3.14 29/73] mm/hugetlb: pmd_huge() returns true for non-present hugepage

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

commit cbef8478bee55775ac312a574aad48af7bb9cf9f upstream.

Migrating hugepages and hwpoisoned hugepages are considered as non-present
hugepages, and they are referenced via migration entries and hwpoison
entries in their page table slots.

This behavior causes race condition because pmd_huge() doesn't tell
non-huge pages from migrating/hwpoisoned hugepages.  follow_page_mask() is
one example where the kernel would call follow_page_pte() for such
hugepage while this function is supposed to handle only normal pages.

To avoid this, this patch makes pmd_huge() return true when pmd_none() is
true *and* pmd_present() is false.  We don't have to worry about mixing up
non-present pmd entry with normal pmd (pointing to leaf level pte entry)
because pmd_present() is true in normal pmd.

The same race condition could happen in (x86-specific) gup_pmd_range(),
where this patch simply adds pmd_present() check instead of pmd_huge().
This is because gup_pmd_range() is fast path.  If we have non-present
hugepage in this function, we will go into gup_huge_pmd(), then return 0
at flag mask check, and finally fall back to the slow path.

Fixes: 290408d4a2 ("hugetlb: hugepage migration core")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Steve Capper <steve.capper@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/gup.c         |    2 +-
 arch/x86/mm/hugetlbpage.c |    8 +++++++-
 mm/hugetlb.c              |    2 ++
 3 files changed, 10 insertions(+), 2 deletions(-)

--- a/arch/x86/mm/gup.c
+++ b/arch/x86/mm/gup.c
@@ -172,7 +172,7 @@ static int gup_pmd_range(pud_t pud, unsi
 		 */
 		if (pmd_none(pmd) || pmd_trans_splitting(pmd))
 			return 0;
-		if (unlikely(pmd_large(pmd))) {
+		if (unlikely(pmd_large(pmd) || !pmd_present(pmd))) {
 			/*
 			 * NUMA hinting faults need to be handled in the GUP
 			 * slowpath for accounting purposes and so that they
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -66,9 +66,15 @@ follow_huge_addr(struct mm_struct *mm, u
 	return ERR_PTR(-EINVAL);
 }
 
+/*
+ * pmd_huge() returns 1 if @pmd is hugetlb related entry, that is normal
+ * hugetlb entry or non-present (migration or hwpoisoned) hugetlb entry.
+ * Otherwise, returns 0.
+ */
 int pmd_huge(pmd_t pmd)
 {
-	return !!(pmd_val(pmd) & _PAGE_PSE);
+	return !pmd_none(pmd) &&
+		(pmd_val(pmd) & (_PAGE_PRESENT|_PAGE_PSE)) != _PAGE_PRESENT;
 }
 
 int pud_huge(pud_t pud)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -3456,6 +3456,8 @@ follow_huge_pmd(struct mm_struct *mm, un
 {
 	struct page *page;
 
+	if (!pmd_present(*pmd))
+		return NULL;
 	page = pte_page(*(pte_t *)pmd);
 	if (page)
 		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);

[PATCH 3.14 30/73] tracing: Fix unmapping loop in tracing_mark_write

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vikram Mulukutla <markivx@codeaurora.org>

commit 7215853e985a4bef1a6c14e00e89dfec84f1e457 upstream.

Commit 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce introduced
an array map_pages that contains the addresses returned by
kmap_atomic. However, when unmapping those pages, map_pages[0]
is unmapped before map_pages[1], breaking the nesting requirement
as specified in the documentation for kmap_atomic/kunmap_atomic.

This was caught by the highmem debug code present in kunmap_atomic.
Fix the loop to do the unmapping properly.

Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.org

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Lime Yang <limey@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -4694,7 +4694,7 @@ tracing_mark_write(struct file *filp, co
 	*fpos += written;
 
  out_unlock:
-	for (i = 0; i < nr_pages; i++){
+	for (i = nr_pages - 1; i >= 0; i--) {
 		kunmap_atomic(map_page[i]);
 		put_page(pages[i]);
 	}

[PATCH 3.14 31/73] ARM: 8284/1: sa1100: clear RCSR_SMR on resume

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

commit e461894dc2ce7778ccde1c3483c9b15a85a7fc5f upstream.

StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset
by entering the sleep mode. After we have resumed, there is little point
in having that bit enabled. Moreover, if this bit is set before reboot,
the bootloader can become confused. Thus clear the SMR bit on resume
just before clearing the scratchpad (resume address) register.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-sa1100/pm.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -81,6 +81,7 @@ static int sa11x0_pm_enter(suspend_state
 	/*
 	 * Ensure not to come back here if it wasn't intended
 	 */
+	RCSR = RCSR_SMR;
 	PSPR = 0;
 
 	/*

[PATCH 3.14 32/73] ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lokesh Vutla <lokeshvutla@ti.com>

commit 1c7e36bfc3e2fb2df5e2d1989a4b6fb9055a0f9b upstream.

With commit '7dedd34: ARM: OMAP2+: hwmod: Fix a crash in _setup_reset()
with DEBUG_LL' we moved from parsing cmdline to identify uart used
for earlycon to using the requsite hwmod CONFIG_DEBUG_OMAPxUARTy FLAGS.

On DRA7 UART3 hwmod doesn't have this flag enabled, and atleast on
BeagleBoard-X15, where we use UART3 for console, boot fails with
DEBUG_LL enabled. Enable DEBUG_OMAP4UART3_FLAGS for UART3 hwmod.

For using DEBUG_LL, enable CONFIG_DEBUG_OMAP4UART3 in menuconfig.

Fixes: 90020c7b2c5e ("ARM: OMAP: DRA7: hwmod: Create initial DRA7XX SoC data")
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1669,7 +1669,7 @@ static struct omap_hwmod dra7xx_uart3_hw
 	.class		= &dra7xx_uart_hwmod_class,
 	.clkdm_name	= "l4per_clkdm",
 	.main_clk	= "uart3_gfclk_mux",
-	.flags		= HWMOD_SWSUP_SIDLE_ACT,
+	.flags		= HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART3_FLAGS,
 	.prcm = {
 		.omap4 = {
 			.clkctrl_offs = DRA7XX_CM_L4PER_UART3_CLKCTRL_OFFSET,

[PATCH 3.14 33/73] ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Osipenko <digetx@gmail.com>

commit de47699d005996b41cea590c6098078ac12058be upstream.

Commit 58ecb23f64ee ("ARM: tegra: add missing unit addresses to DT") added
unit address and changed reg base for GR3D and DSI host1x modules, but these
addresses belongs to GR2D and TVO modules respectively. Fix it by changing
modules unit and reg base addresses to proper ones.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Fixes: 58ecb23f64ee (ARM: tegra: add missing unit addresses to DT)
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/tegra20.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -76,9 +76,9 @@
 			reset-names = "2d";
 		};
 
-		gr3d@54140000 {
+		gr3d@54180000 {
 			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54140000 0x00040000>;
+			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
 			resets = <&tegra_car 24>;
 			reset-names = "3d";
@@ -138,9 +138,9 @@
 			status = "disabled";
 		};
 
-		dsi@542c0000 {
+		dsi@54300000 {
 			compatible = "nvidia,tegra20-dsi";
-			reg = <0x542c0000 0x00040000>;
+			reg = <0x54300000 0x00040000>;
 			clocks = <&tegra_car TEGRA20_CLK_DSI>;
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";

[PATCH 3.14 34/73] ARM: dts: am335x-bone*: usb0 is hardwired for peripheral

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Robert Nelson <robertcnelson@gmail.com>

commit 67fd14b3eca63b14429350e9eadc5fab709a8821 upstream.

Fixes: http://bugs.elinux.org/issues/127

the bb.org community was seeing random reboots before this change.

Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/am335x-bone-common.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -197,6 +197,7 @@
 
 	usb@47401000 {
 		status = "okay";
+		dr_mode = "peripheral";
 	};
 
 	usb@47401800 {

[PATCH 3.14 35/73] tpm_tis: verify interrupt during init

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Scot Doyle <lkml14@scotdoyle.com>

commit 448e9c55c12d6bd4fa90a7e31d802e045666d7c8 upstream.

Some machines, such as the Acer C720 and Toshiba CB35, have TPMs that do
not send IRQs while also having an ACPI TPM entry indicating that they
will be sent. These machines freeze on resume while the tpm_tis module
waits for an IRQ, eventually timing out.

When in interrupt mode, the tpm_tis module should receive an IRQ during
module init. Fall back to polling mode if none is received when expected.

Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Tested-by: Michael Mullin <masmullin@gmail.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[phuewe: minor checkpatch fixed]
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_tis.c |   76 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 62 insertions(+), 14 deletions(-)

--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -75,6 +75,10 @@ enum tis_defaults {
 #define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
+struct priv_data {
+	bool irq_tested;
+};
+
 static LIST_HEAD(tis_chips);
 static DEFINE_MUTEX(tis_lock);
 
@@ -338,12 +342,27 @@ out_err:
 	return rc;
 }
 
+static void disable_interrupts(struct tpm_chip *chip)
+{
+	u32 intmask;
+
+	intmask =
+	    ioread32(chip->vendor.iobase +
+		     TPM_INT_ENABLE(chip->vendor.locality));
+	intmask &= ~TPM_GLOBAL_INT_ENABLE;
+	iowrite32(intmask,
+		  chip->vendor.iobase +
+		  TPM_INT_ENABLE(chip->vendor.locality));
+	free_irq(chip->vendor.irq, chip);
+	chip->vendor.irq = 0;
+}
+
 /*
  * If interrupts are used (signaled by an irq set in the vendor structure)
  * tpm.c can skip polling for the data to be available as the interrupt is
  * waited for here
  */
-static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+static int tpm_tis_send_main(struct tpm_chip *chip, u8 *buf, size_t len)
 {
 	int rc;
 	u32 ordinal;
@@ -373,6 +392,30 @@ out_err:
 	return rc;
 }
 
+static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+	int rc, irq;
+	struct priv_data *priv = chip->vendor.priv;
+
+	if (!chip->vendor.irq || priv->irq_tested)
+		return tpm_tis_send_main(chip, buf, len);
+
+	/* Verify receipt of the expected IRQ */
+	irq = chip->vendor.irq;
+	chip->vendor.irq = 0;
+	rc = tpm_tis_send_main(chip, buf, len);
+	chip->vendor.irq = irq;
+	if (!priv->irq_tested)
+		msleep(1);
+	if (!priv->irq_tested) {
+		disable_interrupts(chip);
+		dev_err(chip->dev,
+			FW_BUG "TPM interrupt not working, polling instead\n");
+	}
+	priv->irq_tested = true;
+	return rc;
+}
+
 struct tis_vendor_timeout_override {
 	u32 did_vid;
 	unsigned long timeout_us[4];
@@ -505,6 +548,7 @@ static irqreturn_t tis_int_handler(int d
 	if (interrupt == 0)
 		return IRQ_NONE;
 
+	((struct priv_data *)chip->vendor.priv)->irq_tested = true;
 	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
 		wake_up_interruptible(&chip->vendor.read_queue);
 	if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
@@ -534,9 +578,14 @@ static int tpm_tis_init(struct device *d
 	u32 vendor, intfcaps, intmask;
 	int rc, i, irq_s, irq_e, probe;
 	struct tpm_chip *chip;
+	struct priv_data *priv;
 
+	priv = devm_kzalloc(dev, sizeof(struct priv_data), GFP_KERNEL);
+	if (priv == NULL)
+		return -ENOMEM;
 	if (!(chip = tpm_register_hardware(dev, &tpm_tis)))
 		return -ENODEV;
+	chip->vendor.priv = priv;
 
 	chip->vendor.iobase = ioremap(start, len);
 	if (!chip->vendor.iobase) {
@@ -605,19 +654,6 @@ static int tpm_tis_init(struct device *d
 	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
 		dev_dbg(dev, "\tData Avail Int Support\n");
 
-	/* get the timeouts before testing for irqs */
-	if (tpm_get_timeouts(chip)) {
-		dev_err(dev, "Could not get TPM timeouts and durations\n");
-		rc = -ENODEV;
-		goto out_err;
-	}
-
-	if (tpm_do_selftest(chip)) {
-		dev_err(dev, "TPM self test failed\n");
-		rc = -ENODEV;
-		goto out_err;
-	}
-
 	/* INTERRUPT Setup */
 	init_waitqueue_head(&chip->vendor.read_queue);
 	init_waitqueue_head(&chip->vendor.int_queue);
@@ -719,6 +755,18 @@ static int tpm_tis_init(struct device *d
 		}
 	}
 
+	if (tpm_get_timeouts(chip)) {
+		dev_err(dev, "Could not get TPM timeouts and durations\n");
+		rc = -ENODEV;
+		goto out_err;
+	}
+
+	if (tpm_do_selftest(chip)) {
+		dev_err(dev, "TPM self test failed\n");
+		rc = -ENODEV;
+		goto out_err;
+	}
+
 	INIT_LIST_HEAD(&chip->vendor.list);
 	mutex_lock(&tis_lock);
 	list_add(&chip->vendor.list, &tis_chips);

[PATCH 3.14 36/73] TPM: Add new TPMs to the tail of the list to prevent inadvertent change of dev

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Howells <dhowells@redhat.com>

commit 398a1e71dc827b994b7f2f56c7c2186fea7f8d75 upstream.

Add newly registered TPMs to the tail of the list, not the beginning, so that
things that are specifying TPM_ANY_NUM don't find that the device they're
using has inadvertently changed.  Adding a second device would break IMA, for
instance.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm-interface.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/tpm/tpm-interface.c
+++ b/drivers/char/tpm/tpm-interface.c
@@ -1122,7 +1122,7 @@ struct tpm_chip *tpm_register_hardware(s
 
 	/* Make chip available */
 	spin_lock(&driver_lock);
-	list_add_rcu(&chip->list, &tpm_chip_list);
+	list_add_tail_rcu(&chip->list, &tpm_chip_list);
 	spin_unlock(&driver_lock);
 
 	return chip;

[PATCH 3.14 37/73] char: tpm: Add missing error check for devm_kzalloc

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kiran Padwal <kiran.padwal@smartplayin.com>

commit bb95cd34ba4c9467114acc78eeddd53ab1c10085 upstream.

Currently these driver are missing a check on the return value of devm_kzalloc,
which would cause a NULL pointer dereference in a OOM situation.

This patch adds a missing check for tpm_i2c_atmel.c and tpm_i2c_nuvoton.c

Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_i2c_atmel.c   |    4 ++++
 drivers/char/tpm/tpm_i2c_nuvoton.c |    5 +++++
 2 files changed, 9 insertions(+)

--- a/drivers/char/tpm/tpm_i2c_atmel.c
+++ b/drivers/char/tpm/tpm_i2c_atmel.c
@@ -168,6 +168,10 @@ static int i2c_atmel_probe(struct i2c_cl
 
 	chip->vendor.priv = devm_kzalloc(dev, sizeof(struct priv_data),
 					 GFP_KERNEL);
+	if (!chip->vendor.priv) {
+		rc = -ENOMEM;
+		goto out_err;
+	}
 
 	/* Default timeouts */
 	chip->vendor.timeout_a = msecs_to_jiffies(TPM_I2C_SHORT_TIMEOUT);
--- a/drivers/char/tpm/tpm_i2c_nuvoton.c
+++ b/drivers/char/tpm/tpm_i2c_nuvoton.c
@@ -538,6 +538,11 @@ static int i2c_nuvoton_probe(struct i2c_
 
 	chip->vendor.priv = devm_kzalloc(dev, sizeof(struct priv_data),
 					 GFP_KERNEL);
+	if (!chip->vendor.priv) {
+		rc = -ENOMEM;
+		goto out_err;
+	}
+
 	init_waitqueue_head(&chip->vendor.read_queue);
 	init_waitqueue_head(&chip->vendor.int_queue);
 

[PATCH 3.14 38/73] tpm: Fix NULL return in tpm_ibmvtpm_get_desired_dma

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Hon Ching (Vicky) Lo" <honclo@linux.vnet.ibm.com>

commit 84eb186bc37c0900b53077ca21cf6dd15823a232 upstream.

There was an oops in tpm_ibmvtpm_get_desired_dma, which caused
kernel panic during boot when vTPM is enabled in Power partition
configured in AMS mode.

vio_bus_probe calls vio_cmo_bus_probe which calls
tpm_ibmvtpm_get_desired_dma to get the size needed for DMA allocation.
The problem is, vio_cmo_bus_probe is called before calling probe, which
for vtpm is tpm_ibmvtpm_probe and it's this function that initializes
and sets up vtpm's CRQ and gets required data values.  Therefore,
since this has not yet been done, NULL is returned in attempt to get
the size for DMA allocation.

We added a NULL check.  In addition, a default buffer size will
be set when NULL is returned.

Signed-off-by: Hon Ching (Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_ibmvtpm.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -307,6 +307,14 @@ static int tpm_ibmvtpm_remove(struct vio
 static unsigned long tpm_ibmvtpm_get_desired_dma(struct vio_dev *vdev)
 {
 	struct ibmvtpm_dev *ibmvtpm = ibmvtpm_get_data(&vdev->dev);
+
+	/* ibmvtpm initializes at probe time, so the data we are
+	* asking for may not be set yet. Estimate that 4K required
+	* for TCE-mapped buffer in addition to CRQ.
+	*/
+	if (!ibmvtpm)
+		return CRQ_RES_BUF_SIZE + PAGE_SIZE;
+
 	return CRQ_RES_BUF_SIZE + ibmvtpm->rtce_size;
 }
 

[PATCH 3.14 39/73] tpm/tpm_i2c_stm_st33: Fix potential bug in tpm_stm_i2c_send

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Ricard <christophe.ricard@gmail.com>

commit 1ba3b0b6f218072afe8372d12f1b6bf26a26008e upstream.

When sending data in tpm_stm_i2c_send, each loop iteration send buf.
Send buf + i instead as the goal of this for loop is to send a number
of byte from buf that fit in burstcnt. Once those byte are sent, we are
supposed to send the next ones.

The driver was working because the burstcount value returns always the maximum size for a TPM
command or response. (0x800 for a command and 0x400 for a response).

Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_i2c_stm_st33.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/tpm/tpm_i2c_stm_st33.c
+++ b/drivers/char/tpm/tpm_i2c_stm_st33.c
@@ -488,7 +488,7 @@ static int tpm_stm_i2c_send(struct tpm_c
 		if (burstcnt < 0)
 			return burstcnt;
 		size = min_t(int, len - i - 1, burstcnt);
-		ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf, size);
+		ret = I2C_WRITE_DATA(client, TPM_DATA_FIFO, buf + i, size);
 		if (ret < 0)
 			goto out_err;
 

[PATCH 3.14 40/73] Added Little Endian support to vtpm module

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: honclo <honclo@imap.linux.ibm.com>

commit eb71f8a5e33fa1066fb92f0111ab366a341e1f6c upstream.

The tpm_ibmvtpm module is affected by an unaligned access problem.
ibmvtpm_crq_get_version failed with rc=-4 during boot when vTPM is
enabled in Power partition, which supports both little endian and
big endian modes.

We added little endian support to fix this problem:
1) added cpu_to_be64 calls to ensure BE data is sent from an LE OS.
2) added be16_to_cpu and be32_to_cpu calls to make sure data received
   is in LE format on a LE OS.

Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
[phuewe: manually applied the patch :( ]
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_ibmvtpm.c |   20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -148,7 +148,8 @@ static int tpm_ibmvtpm_send(struct tpm_c
 	crq.len = (u16)count;
 	crq.data = ibmvtpm->rtce_dma_handle;
 
-	rc = ibmvtpm_send_crq(ibmvtpm->vdev, word[0], word[1]);
+	rc = ibmvtpm_send_crq(ibmvtpm->vdev, cpu_to_be64(word[0]),
+			      cpu_to_be64(word[1]));
 	if (rc != H_SUCCESS) {
 		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
 		rc = 0;
@@ -186,7 +187,8 @@ static int ibmvtpm_crq_get_rtce_size(str
 	crq.valid = (u8)IBMVTPM_VALID_CMD;
 	crq.msg = (u8)VTPM_GET_RTCE_BUFFER_SIZE;
 
-	rc = ibmvtpm_send_crq(ibmvtpm->vdev, buf[0], buf[1]);
+	rc = ibmvtpm_send_crq(ibmvtpm->vdev, cpu_to_be64(buf[0]),
+			      cpu_to_be64(buf[1]));
 	if (rc != H_SUCCESS)
 		dev_err(ibmvtpm->dev,
 			"ibmvtpm_crq_get_rtce_size failed rc=%d\n", rc);
@@ -212,7 +214,8 @@ static int ibmvtpm_crq_get_version(struc
 	crq.valid = (u8)IBMVTPM_VALID_CMD;
 	crq.msg = (u8)VTPM_GET_VERSION;
 
-	rc = ibmvtpm_send_crq(ibmvtpm->vdev, buf[0], buf[1]);
+	rc = ibmvtpm_send_crq(ibmvtpm->vdev, cpu_to_be64(buf[0]),
+			      cpu_to_be64(buf[1]));
 	if (rc != H_SUCCESS)
 		dev_err(ibmvtpm->dev,
 			"ibmvtpm_crq_get_version failed rc=%d\n", rc);
@@ -335,7 +338,8 @@ static int tpm_ibmvtpm_suspend(struct de
 	crq.valid = (u8)IBMVTPM_VALID_CMD;
 	crq.msg = (u8)VTPM_PREPARE_TO_SUSPEND;
 
-	rc = ibmvtpm_send_crq(ibmvtpm->vdev, buf[0], buf[1]);
+	rc = ibmvtpm_send_crq(ibmvtpm->vdev, cpu_to_be64(buf[0]),
+			      cpu_to_be64(buf[1]));
 	if (rc != H_SUCCESS)
 		dev_err(ibmvtpm->dev,
 			"tpm_ibmvtpm_suspend failed rc=%d\n", rc);
@@ -480,11 +484,11 @@ static void ibmvtpm_crq_process(struct i
 	case IBMVTPM_VALID_CMD:
 		switch (crq->msg) {
 		case VTPM_GET_RTCE_BUFFER_SIZE_RES:
-			if (crq->len <= 0) {
+			if (be16_to_cpu(crq->len) <= 0) {
 				dev_err(ibmvtpm->dev, "Invalid rtce size\n");
 				return;
 			}
-			ibmvtpm->rtce_size = crq->len;
+			ibmvtpm->rtce_size = be16_to_cpu(crq->len);
 			ibmvtpm->rtce_buf = kmalloc(ibmvtpm->rtce_size,
 						    GFP_KERNEL);
 			if (!ibmvtpm->rtce_buf) {
@@ -505,11 +509,11 @@ static void ibmvtpm_crq_process(struct i
 
 			return;
 		case VTPM_GET_VERSION_RES:
-			ibmvtpm->vtpm_version = crq->data;
+			ibmvtpm->vtpm_version = be32_to_cpu(crq->data);
 			return;
 		case VTPM_TPM_COMMAND_RES:
 			/* len of the data in rtce buffer */
-			ibmvtpm->res_len = crq->len;
+			ibmvtpm->res_len = be16_to_cpu(crq->len);
 			wake_up_interruptible(&ibmvtpm->wq);
 			return;
 		default:

[PATCH 3.14 41/73] NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit d8ba1f971497c19cf80da1ea5391a46a5f9fbd41 upstream.

If the call to decode_rc_list() fails due to a memory allocation error,
then we need to truncate the array size to ensure that we only call
kfree() on those pointer that were allocated.

Reported-by: David Ramos <daramos@stanford.edu>
Fixes: 4aece6a19cf7f ("nfs41: cb_sequence xdr implementation")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/callback_xdr.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -464,8 +464,10 @@ static __be32 decode_cb_sequence_args(st
 
 		for (i = 0; i < args->csa_nrclists; i++) {
 			status = decode_rc_list(xdr, &args->csa_rclists[i]);
-			if (status)
+			if (status) {
+				args->csa_nrclists = i;
 				goto out_free;
+			}
 		}
 	}
 	status = 0;

[PATCH 3.14 42/73] iscsi-target: Drop problematic active_ts_list usage

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 3fd7b60f2c7418239d586e359e0c6d8503e10646 upstream.

This patch drops legacy active_ts_list usage within iscsi_target_tq.c
code.  It was originally used to track the active thread sets during
iscsi-target shutdown, and is no longer used by modern upstream code.

Two people have reported list corruption using traditional iscsi-target
and iser-target with the following backtrace, that appears to be related
to iscsi_thread_set->ts_list being used across both active_ts_list and
inactive_ts_list.

[   60.782534] ------------[ cut here ]------------
[   60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
[   60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100)
[   60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop
tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr
iscsi_target_mod target_core_pscsi target_core_file target_core_iblock
target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat
nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT
xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc
autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state
nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs
ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror
dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun
kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw
pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb
i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F)
mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F)
libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded:
speedstep_lib]
[   60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2
[   60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013
[   60.782599]  0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035
[   60.782602]  ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002
[   60.782605]  ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58
[   60.782607] Call Trace:
[   60.782611]  [<ffffffff81553ae7>] dump_stack+0x49/0x62
[   60.782615]  [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0
[   60.782618]  [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50
[   60.782620]  [<ffffffff81280933>] __list_del_entry+0x63/0xd0
[   60.782622]  [<ffffffff812809b1>] list_del+0x11/0x40
[   60.782630]  [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod]
[   60.782635]  [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod]
[   60.782642]  [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod]
[   60.782647]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782652]  [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod]
[   60.782655]  [<ffffffff8106f99e>] kthread+0xce/0xe0
[   60.782657]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782660]  [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0
[   60.782662]  [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70
[   60.782663] ---[ end trace 9662f4a661d33965 ]---

Since this code is no longer used, go ahead and drop the problematic usage
all-together.

Reported-by: Gavin Guo <gavin.guo@canonical.com>
Reported-by: Moussa Ba <moussaba@micron.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_tq.c |   28 +++++-----------------------
 1 file changed, 5 insertions(+), 23 deletions(-)

--- a/drivers/target/iscsi/iscsi_target_tq.c
+++ b/drivers/target/iscsi/iscsi_target_tq.c
@@ -24,36 +24,22 @@
 #include "iscsi_target_tq.h"
 #include "iscsi_target.h"
 
-static LIST_HEAD(active_ts_list);
 static LIST_HEAD(inactive_ts_list);
-static DEFINE_SPINLOCK(active_ts_lock);
 static DEFINE_SPINLOCK(inactive_ts_lock);
 static DEFINE_SPINLOCK(ts_bitmap_lock);
 
-static void iscsi_add_ts_to_active_list(struct iscsi_thread_set *ts)
-{
-	spin_lock(&active_ts_lock);
-	list_add_tail(&ts->ts_list, &active_ts_list);
-	iscsit_global->active_ts++;
-	spin_unlock(&active_ts_lock);
-}
-
 static void iscsi_add_ts_to_inactive_list(struct iscsi_thread_set *ts)
 {
+	if (!list_empty(&ts->ts_list)) {
+		WARN_ON(1);
+		return;
+	}
 	spin_lock(&inactive_ts_lock);
 	list_add_tail(&ts->ts_list, &inactive_ts_list);
 	iscsit_global->inactive_ts++;
 	spin_unlock(&inactive_ts_lock);
 }
 
-static void iscsi_del_ts_from_active_list(struct iscsi_thread_set *ts)
-{
-	spin_lock(&active_ts_lock);
-	list_del(&ts->ts_list);
-	iscsit_global->active_ts--;
-	spin_unlock(&active_ts_lock);
-}
-
 static struct iscsi_thread_set *iscsi_get_ts_from_inactive_list(void)
 {
 	struct iscsi_thread_set *ts;
@@ -66,7 +52,7 @@ static struct iscsi_thread_set *iscsi_ge
 
 	ts = list_first_entry(&inactive_ts_list, struct iscsi_thread_set, ts_list);
 
-	list_del(&ts->ts_list);
+	list_del_init(&ts->ts_list);
 	iscsit_global->inactive_ts--;
 	spin_unlock(&inactive_ts_lock);
 
@@ -204,8 +190,6 @@ static void iscsi_deallocate_extra_threa
 
 void iscsi_activate_thread_set(struct iscsi_conn *conn, struct iscsi_thread_set *ts)
 {
-	iscsi_add_ts_to_active_list(ts);
-
 	spin_lock_bh(&ts->ts_state_lock);
 	conn->thread_set = ts;
 	ts->conn = conn;
@@ -397,7 +381,6 @@ struct iscsi_conn *iscsi_rx_thread_pre_h
 
 	if (ts->delay_inactive && (--ts->thread_count == 0)) {
 		spin_unlock_bh(&ts->ts_state_lock);
-		iscsi_del_ts_from_active_list(ts);
 
 		if (!iscsit_global->in_shutdown)
 			iscsi_deallocate_extra_thread_sets();
@@ -452,7 +435,6 @@ struct iscsi_conn *iscsi_tx_thread_pre_h
 
 	if (ts->delay_inactive && (--ts->thread_count == 0)) {
 		spin_unlock_bh(&ts->ts_state_lock);
-		iscsi_del_ts_from_active_list(ts);
 
 		if (!iscsit_global->in_shutdown)
 			iscsi_deallocate_extra_thread_sets();

[PATCH 3.14 43/73] cfq-iosched: handle failure of cfq group allocation

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>

commit 69abaffec7d47a083739b79e3066cb3730eba72e upstream.

Cfq_lookup_create_cfqg() allocates struct blkcg_gq using GFP_ATOMIC.
In cfq_find_alloc_queue() possible allocation failure is not handled.
As a result kernel oopses on NULL pointer dereference when
cfq_link_cfqq_cfqg() calls cfqg_get() for NULL pointer.

Bug was introduced in v3.5 in commit cd1604fab4f9 ("blkcg: factor
out blkio_group creation"). Prior to that commit cfq group lookup
had returned pointer to root group as fallback.

This patch handles this error using existing fallback oom_cfqq.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: cd1604fab4f9 ("blkcg: factor out blkio_group creation")
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/cfq-iosched.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -3585,6 +3585,11 @@ retry:
 
 	blkcg = bio_blkcg(bio);
 	cfqg = cfq_lookup_create_cfqg(cfqd, blkcg);
+	if (!cfqg) {
+		cfqq = &cfqd->oom_cfqq;
+		goto out;
+	}
+
 	cfqq = cic_to_cfqq(cic, is_sync);
 
 	/*
@@ -3621,7 +3626,7 @@ retry:
 		} else
 			cfqq = &cfqd->oom_cfqq;
 	}
-
+out:
 	if (new_cfqq)
 		kmem_cache_free(cfq_pool, new_cfqq);
 

[PATCH 3.14 44/73] cfq-iosched: fix incorrect filing of rt async cfqq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Moyer <jmoyer@redhat.com>

commit c6ce194325cef342313e3d27620411ce90a89c50 upstream.

Hi,

If you can manage to submit an async write as the first async I/O from
the context of a process with realtime scheduling priority, then a
cfq_queue is allocated, but filed into the wrong async_cfqq bucket.  It
ends up in the best effort array, but actually has realtime I/O
scheduling priority set in cfqq->ioprio.

The reason is that cfq_get_queue assumes the default scheduling class and
priority when there is no information present (i.e. when the async cfqq
is created):

static struct cfq_queue *
cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic,
	      struct bio *bio, gfp_t gfp_mask)
{
	const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
	const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio);

cic->ioprio starts out as 0, which is "invalid".  So, class of 0
(IOPRIO_CLASS_NONE) is passed to cfq_async_queue_prio like so:

		async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio);

static struct cfq_queue **
cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio)
{
        switch (ioprio_class) {
        case IOPRIO_CLASS_RT:
                return &cfqd->async_cfqq[0][ioprio];
        case IOPRIO_CLASS_NONE:
                ioprio = IOPRIO_NORM;
                /* fall through */
        case IOPRIO_CLASS_BE:
                return &cfqd->async_cfqq[1][ioprio];
        case IOPRIO_CLASS_IDLE:
                return &cfqd->async_idle_cfqq;
        default:
                BUG();
        }
}

Here, instead of returning a class mapped from the process' scheduling
priority, we get back the bucket associated with IOPRIO_CLASS_BE.

Now, there is no queue allocated there yet, so we create it:

		cfqq = cfq_find_alloc_queue(cfqd, is_sync, cic, bio, gfp_mask);

That function ends up doing this:

			cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync);
			cfq_init_prio_data(cfqq, cic);

cfq_init_cfqq marks the priority as having changed.  Then, cfq_init_prio
data does this:

	ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
	switch (ioprio_class) {
	default:
		printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class);
	case IOPRIO_CLASS_NONE:
		/*
		 * no prio set, inherit CPU scheduling settings
		 */
		cfqq->ioprio = task_nice_ioprio(tsk);
		cfqq->ioprio_class = task_nice_ioclass(tsk);
		break;

So we basically have two code paths that treat IOPRIO_CLASS_NONE
differently, which results in an RT async cfqq filed into a best effort
bucket.

Attached is a patch which fixes the problem.  I'm not sure how to make
it cleaner.  Suggestions would be welcome.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/cfq-iosched.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -3656,12 +3656,17 @@ static struct cfq_queue *
 cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic,
 	      struct bio *bio, gfp_t gfp_mask)
 {
-	const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
-	const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio);
+	int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio);
+	int ioprio = IOPRIO_PRIO_DATA(cic->ioprio);
 	struct cfq_queue **async_cfqq = NULL;
 	struct cfq_queue *cfqq = NULL;
 
 	if (!is_sync) {
+		if (!ioprio_valid(cic->ioprio)) {
+			struct task_struct *tsk = current;
+			ioprio = task_nice_ioprio(tsk);
+			ioprio_class = task_nice_ioclass(tsk);
+		}
 		async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio);
 		cfqq = *async_cfqq;
 	}

[PATCH 3.14 45/73] axonram: Fix bug in direct_access

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox <matthew.r.wilcox@intel.com>

commit 91117a20245b59f70b563523edbf998a62fc6383 upstream.

The 'pfn' returned by axonram was completely bogus, and has been since
2008.

Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/sysdev/axonram.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -156,7 +156,7 @@ axon_ram_direct_access(struct block_devi
 	}
 
 	*kaddr = (void *)(bank->ph_addr + offset);
-	*pfn = virt_to_phys(kaddr) >> PAGE_SHIFT;
+	*pfn = virt_to_phys(*kaddr) >> PAGE_SHIFT;
 
 	return 0;
 }

[PATCH 3.14 46/73] tty: Prevent untrappable signals from malicious program

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit 37480a05685ed5b8e1b9bf5e5c53b5810258b149 upstream.

Commit 26df6d13406d1a5 ("tty: Add EXTPROC support for LINEMODE")
allows a process which has opened a pty master to send _any_ signal
to the process group of the pty slave. Although potentially
exploitable by a malicious program running a setuid program on
a pty slave, it's unknown if this exploit currently exists.

Limit to signals actually used.

Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Howard Chu <hyc@symas.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/pty.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -209,6 +209,9 @@ static int pty_signal(struct tty_struct
 	unsigned long flags;
 	struct pid *pgrp;
 
+	if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP)
+		return -EINVAL;
+
 	if (tty->link) {
 		spin_lock_irqsave(&tty->link->ctrl_lock, flags);
 		pgrp = get_pid(tty->link->pgrp);

[PATCH 3.14 47/73] tty/serial: at91: fix error handling in atmel_serial_probe()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cyrille Pitchen <cyrille.pitchen@atmel.com>

commit 6fbb9bdf0f3fbe23aeff806489791aa876adaffb upstream.

-EDEFER error wasn't handle properly by atmel_serial_probe().
As an example, when atmel_serial_probe() is called for the first time, we pass
the test_and_set_bit() test to check whether the port has already been
initalized. Then we call atmel_init_port(), which may return -EDEFER, possibly
returned before by clk_get(). Consequently atmel_serial_probe() used to return
this error code WITHOUT clearing the port bit in the "atmel_ports_in_use" mask.
When atmel_serial_probe() was called for the second time, it used to fail on
the test_and_set_bit() function then returning -EBUSY.

When atmel_serial_probe() fails, this patch make it clear the port bit in the
"atmel_ports_in_use" mask, if needed, before returning the error code.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/atmel_serial.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2392,7 +2392,7 @@ static int atmel_serial_probe(struct pla
 
 	ret = atmel_init_port(port, pdev);
 	if (ret)
-		goto err;
+		goto err_clear_bit;
 
 	if (!atmel_use_pdc_rx(&port->uart)) {
 		ret = -ENOMEM;
@@ -2441,6 +2441,8 @@ err_alloc_ring:
 		clk_put(port->clk);
 		port->clk = NULL;
 	}
+err_clear_bit:
+	clear_bit(port->uart.line, atmel_ports_in_use);
 err:
 	return ret;
 }

[PATCH 3.14 48/73] USB: cp210x: add ID for RUGGEDCOM USB Serial Console

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>

commit a6f0331236fa75afba14bbcf6668d42cebb55c43 upstream.

Added the USB serial console device ID for Siemens Ruggedcom devices
which have a USB port for their serial console.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/cp210x.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -56,6 +56,7 @@ static const struct usb_device_id id_tab
 	{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
 	{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
 	{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+	{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
 	{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
 	{ USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */
 	{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */

[PATCH 3.14 49/73] USB: fix use-after-free bug in usb_hcd_unlink_urb()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@rowland.harvard.edu>

commit c99197902da284b4b723451c1471c45b18537cde upstream.

The usb_hcd_unlink_urb() routine in hcd.c contains two possible
use-after-free errors.  The dev_dbg() statement at the end of the
routine dereferences urb and urb->dev even though both structures may
have been deallocated.

This patch fixes the problem by storing urb->dev in a local variable
(avoiding the dereference of urb) and moving the dev_dbg() up before
the usb_put_dev() call.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/hcd.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1617,6 +1617,7 @@ static int unlink1(struct usb_hcd *hcd,
 int usb_hcd_unlink_urb (struct urb *urb, int status)
 {
 	struct usb_hcd		*hcd;
+	struct usb_device	*udev = urb->dev;
 	int			retval = -EIDRM;
 	unsigned long		flags;
 
@@ -1628,20 +1629,19 @@ int usb_hcd_unlink_urb (struct urb *urb,
 	spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
 	if (atomic_read(&urb->use_count) > 0) {
 		retval = 0;
-		usb_get_dev(urb->dev);
+		usb_get_dev(udev);
 	}
 	spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
 	if (retval == 0) {
 		hcd = bus_to_hcd(urb->dev->bus);
 		retval = unlink1(hcd, urb, status);
-		usb_put_dev(urb->dev);
+		if (retval == 0)
+			retval = -EINPROGRESS;
+		else if (retval != -EIDRM && retval != -EBUSY)
+			dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
+					urb, retval);
+		usb_put_dev(udev);
 	}
-
-	if (retval == 0)
-		retval = -EINPROGRESS;
-	else if (retval != -EIDRM && retval != -EBUSY)
-		dev_dbg(&urb->dev->dev, "hcd_unlink_urb %p fail %d\n",
-				urb, retval);
 	return retval;
 }
 

[PATCH 3.14 50/73] usb: core: buffer: smallest buffer should start at ARCH_DMA_MINALIGN

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

commit 5efd2ea8c9f4f12916ffc8ba636792ce052f6911 upstream.

the following error pops up during "testusb -a -t 10"
| musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128,	f134e000/be842000 (bad dma)
hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of
size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in
hcd_buffer_alloc() returning memory which is 32 bytes aligned and it
might by identified by buffer_offset() as another buffer. This means the
buffer which is on a 32 byte boundary will not get freed, instead it
tries to free another buffer with the error message.

This patch fixes the issue by creating the smallest DMA buffer with the
size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is
smaller). This might be 32, 64 or even 128 bytes. The next three pools
will have the size 128, 512 and 2048.
In case the smallest pool is 128 bytes then we have only three pools
instead of four (and zero the first entry in the array).
The last pool size is always 2048 bytes which is the assumed PAGE_SIZE /
2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where
we would end up with 8KiB buffer in case we have 16KiB pages.
Instead I think it makes sense to have a common size(s) and extend them
if there is need to.
There is a BUILD_BUG_ON() now in case someone has a minalign of more than
128 bytes.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/buffer.c |   26 +++++++++++++++++---------
 drivers/usb/core/usb.c    |    1 +
 include/linux/usb/hcd.h   |    1 +
 3 files changed, 19 insertions(+), 9 deletions(-)

--- a/drivers/usb/core/buffer.c
+++ b/drivers/usb/core/buffer.c
@@ -22,17 +22,25 @@
  */
 
 /* FIXME tune these based on pool statistics ... */
-static const size_t	pool_max[HCD_BUFFER_POOLS] = {
-	/* platforms without dma-friendly caches might need to
-	 * prevent cacheline sharing...
-	 */
-	32,
-	128,
-	512,
-	PAGE_SIZE / 2
-	/* bigger --> allocate pages */
+static size_t pool_max[HCD_BUFFER_POOLS] = {
+	32, 128, 512, 2048,
 };
 
+void __init usb_init_pool_max(void)
+{
+	/*
+	 * The pool_max values must never be smaller than
+	 * ARCH_KMALLOC_MINALIGN.
+	 */
+	if (ARCH_KMALLOC_MINALIGN <= 32)
+		;			/* Original value is okay */
+	else if (ARCH_KMALLOC_MINALIGN <= 64)
+		pool_max[0] = 64;
+	else if (ARCH_KMALLOC_MINALIGN <= 128)
+		pool_max[0] = 0;	/* Don't use this pool */
+	else
+		BUILD_BUG();		/* We don't allow this */
+}
 
 /* SETUP primitives */
 
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1050,6 +1050,7 @@ static int __init usb_init(void)
 		pr_info("%s: USB support disabled\n", usbcore_name);
 		return 0;
 	}
+	usb_init_pool_max();
 
 	retval = usb_debugfs_init();
 	if (retval)
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -447,6 +447,7 @@ extern const struct dev_pm_ops usb_hcd_p
 #endif /* CONFIG_PCI */
 
 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
+void usb_init_pool_max(void);
 int hcd_buffer_create(struct usb_hcd *hcd);
 void hcd_buffer_destroy(struct usb_hcd *hcd);
 

[PATCH 3.14 51/73] vt: provide notifications on selection changes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Pitre <nicolas.pitre@linaro.org>

commit 19e3ae6b4f07a87822c1c9e7ed99d31860e701af upstream.

The vcs device's poll/fasync support relies on the vt notifier to signal
changes to the screen content.  Notifier invocations were missing for
changes that comes through the selection interface though.  Fix that.

Tested with BRLTTY 5.2.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Dave Mielke <dave@mielke.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -498,6 +498,7 @@ void invert_screen(struct vc_data *vc, i
 #endif
 	if (DO_UPDATE(vc))
 		do_update_region(vc, (unsigned long) p, count);
+	notify_update(vc);
 }
 
 /* used by selection: complement pointer position */
@@ -514,6 +515,7 @@ void complement_pos(struct vc_data *vc,
 		scr_writew(old, screenpos(vc, old_offset, 1));
 		if (DO_UPDATE(vc))
 			vc->vc_sw->con_putc(vc, old, oldy, oldx);
+		notify_update(vc);
 	}
 
 	old_offset = offset;
@@ -531,8 +533,8 @@ void complement_pos(struct vc_data *vc,
 			oldy = (offset >> 1) / vc->vc_cols;
 			vc->vc_sw->con_putc(vc, new, oldy, oldx);
 		}
+		notify_update(vc);
 	}
-
 }
 
 static void insert_char(struct vc_data *vc, unsigned int nr)

[PATCH 3.14 52/73] ARM: pxa: add regulator_has_full_constraints to corgi board file

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

commit 271e80176aae4e5b481f4bb92df9768c6075bbca upstream.

Add regulator_has_full_constraints() call to corgi board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on corgi if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517
corgi-audio corgi-audio: ASoC: failed to instantiate card -517

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-pxa/corgi.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/io.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
@@ -711,6 +712,8 @@ static void __init corgi_init(void)
 		sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_corgi(struct tag *tags, char **cmdline,

[PATCH 3.14 53/73] ARM: pxa: add regulator_has_full_constraints to poodle board file

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

commit 9bc78f32c2e430aebf6def965b316aa95e37a20c upstream.

Add regulator_has_full_constraints() call to poodle board file to let
regulator core know that we do not have any additional regulators left.
This lets it substitute unprovided regulators with dummy ones.

This fixes the following warnings that can be seen on poodle if
regulators are enabled:

ads7846 spi1.0: unable to get regulator: -517
spi spi1.0: Driver ads7846 requests probe deferral
wm8731 0-001b: Failed to get supply 'AVDD': -517
wm8731 0-001b: Failed to request supplies: -517
wm8731 0-001b: ASoC: failed to probe component -517

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-pxa/poodle.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/regulator/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/pxa2xx_spi.h>
@@ -454,6 +455,7 @@ static void __init poodle_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices));
 	poodle_init_spi();
+	regulator_has_full_constraints();
 }
 
 static void __init fixup_poodle(struct tag *tags, char **cmdline,

[PATCH 3.14 54/73] kdb: fix incorrect counts in KDB summary command output

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jay Lan <jlan@sgi.com>

commit 146755923262037fc4c54abc28c04b1103f3cc51 upstream.

The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.

A define of K(x) as
is defined in the code, but not used.

This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.

Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/debug/kdb/kdb_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -2535,7 +2535,7 @@ static int kdb_summary(int argc, const c
 #define K(x) ((x) << (PAGE_SHIFT - 10))
 	kdb_printf("\nMemTotal:       %8lu kB\nMemFree:        %8lu kB\n"
 		   "Buffers:        %8lu kB\n",
-		   val.totalram, val.freeram, val.bufferram);
+		   K(val.totalram), K(val.freeram), K(val.bufferram));
 	return 0;
 }
 

[PATCH 3.14 55/73] ntp: Fixup adjtimex freq validation on 32-bit systems

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 29183a70b0b828500816bd794b3fe192fce89f73 upstream.

Additional validation of adjtimex freq values to avoid
potential multiplication overflows were added in commit
5e5aeb4367b (time: adjtimex: Validate the ADJ_FREQUENCY values)

Unfortunately the patch used LONG_MAX/MIN instead of
LLONG_MAX/MIN, which was fine on 64-bit systems, but being
much smaller on 32-bit systems caused false positives
resulting in most direct frequency adjustments to fail w/
EINVAL.

ntpd only does direct frequency adjustments at startup, so
the issue was not as easily observed there, but other time
sync applications like ptpd and chrony were more effected by
the bug.

See bugs:

  https://bugzilla.kernel.org/show_bug.cgi?id=92481
  https://bugzilla.redhat.com/show_bug.cgi?id=1188074

This patch changes the checks to use LLONG_MAX for
clarity, and additionally the checks are disabled
on 32-bit systems since LLONG_MAX/PPM_SCALE is always
larger then the 32-bit long freq value, so multiplication
overflows aren't possible there.

Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
Reported-by: George Joseph <george.joseph@fairview5.com>
Tested-by: George Joseph <george.joseph@fairview5.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org
[ Prettified the changelog and the comments a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/ntp.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -631,10 +631,14 @@ int ntp_validate_timex(struct timex *txc
 	if ((txc->modes & ADJ_SETOFFSET) && (!capable(CAP_SYS_TIME)))
 		return -EPERM;
 
-	if (txc->modes & ADJ_FREQUENCY) {
-		if (LONG_MIN / PPM_SCALE > txc->freq)
+	/*
+	 * Check for potential multiplication overflows that can
+	 * only happen on 64-bit systems:
+	 */
+	if ((txc->modes & ADJ_FREQUENCY) && (BITS_PER_LONG == 64)) {
+		if (LLONG_MIN / PPM_SCALE > txc->freq)
 			return -EINVAL;
-		if (LONG_MAX / PPM_SCALE < txc->freq)
+		if (LLONG_MAX / PPM_SCALE < txc->freq)
 			return -EINVAL;
 	}
 

[PATCH 3.14 56/73] ARC: fix page address calculation if PAGE_OFFSET != LINUX_LINK_BASE

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Brodkin <abrodkin@synopsys.com>

commit 06f34e1c28f3608b0ce5b310e41102d3fe7b65a1 upstream.

We used to calculate page address differently in 2 cases:

1. In virt_to_page(x) we do
 --->8---
 mem_map + (x - CONFIG_LINUX_LINK_BASE) >> PAGE_SHIFT
 --->8---

2. In in pte_page(x) we do
 --->8---
 mem_map + (pte_val(x) - PAGE_OFFSET) >> PAGE_SHIFT
 --->8---

That leads to problems in case PAGE_OFFSET != CONFIG_LINUX_LINK_BASE -
different pages will be selected depending on where and how we calculate
page address.

In particular in the STAR 9000853582 when gdb attempted to read memory
of another process it got improper page in get_user_pages() because this
is exactly one of the places where we search for a page by pte_page().

The fix is trivial - we need to calculate page address similarly in both
cases.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arc/include/asm/pgtable.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -259,7 +259,8 @@ static inline void pmd_set(pmd_t *pmdp,
 #define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
 
 #define pte_page(x) (mem_map + \
-		(unsigned long)(((pte_val(x) - PAGE_OFFSET) >> PAGE_SHIFT)))
+		(unsigned long)(((pte_val(x) - CONFIG_LINUX_LINK_BASE) >> \
+				PAGE_SHIFT)))
 
 #define mk_pte(page, pgprot)						\
 ({									\

[PATCH 3.14 57/73] KVM: s390: floating irqs: fix user triggerable endless loop

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Hildenbrand <dahi@linux.vnet.ibm.com>

commit 8e2207cdd087ebb031e9118d1fd0902c6533a5e5 upstream.

If a vm with no VCPUs is created, the injection of a floating irq
leads to an endless loop in the kernel.

Let's skip the search for a destination VCPU for a floating irq if no
VCPUs were created.

Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/interrupt.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -739,6 +739,8 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 		list_add_tail(&inti->list, &iter->list);
 	}
 	atomic_set(&fi->active, 1);
+	if (atomic_read(&kvm->online_vcpus) == 0)
+		goto unlock_fi;
 	sigcpu = find_first_bit(fi->idle_mask, KVM_MAX_VCPUS);
 	if (sigcpu == KVM_MAX_VCPUS) {
 		do {

[PATCH 3.14 58/73] KVM: MIPS: Dont leak FPU/DSP to guest

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit f798217dfd038af981a18bbe4bc57027a08bb182 upstream.

The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by
kvm_mips_set_c0_status() on a guest exit, presumably in case there is
active state that needs saving if pre-emption occurs. However neither of
these bits are cleared again when returning to the guest.

This effectively gives the guest access to the FPU/DSP hardware after
the first guest exit even though it is not aware of its presence,
allowing FP instructions in guest user code to intermittently actually
execute instead of trapping into the guest OS for emulation. It will
then read & manipulate the hardware FP registers which technically
belong to the user process (e.g. QEMU), or are stale from another user
process. It can also crash the guest OS by causing an FP exception, for
which a guest exception handler won't have been registered.

First lets save and disable the FPU (and MSA) state with lose_fpu(1)
before entering the guest. This simplifies the problem, especially for
when guest FPU/MSA support is added in the future, and prevents FR=1 FPU
state being live when the FR bit gets cleared for the guest, which
according to the architecture causes the contents of the FPU and vector
registers to become UNPREDICTABLE.

We can then safely remove the enabling of the FPU in
kvm_mips_set_c0_status(), since there should never be any active FPU or
MSA state to save at pre-emption, which should plug the FPU leak.

DSP state is always live rather than being lazily restored, so for that
it is simpler to just clear the MX bit again when re-entering the guest.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
This should apply to stable trees 3.12 and 3.14, but not 3.10. The files
had been renamed since v3.14 so it cherry-picked cleanly but the patch
didn't apply cleanly. I've also added a reference to the "MIPS: Export
FP functions used by lose_fpu(1) for KVM" commit which is itself marked
for stable, but is needed to avoid a build failure when KVM=m.
---
 arch/mips/kvm/kvm_locore.S |    2 +-
 arch/mips/kvm/kvm_mips.c   |    6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/kvm/kvm_locore.S
+++ b/arch/mips/kvm/kvm_locore.S
@@ -428,7 +428,7 @@ __kvm_mips_return_to_guest:
 	/* Setup status register for running guest in UM */
 	.set	at
 	or	v1, v1, (ST0_EXL | KSU_USER | ST0_IE)
-	and	v1, v1, ~ST0_CU0
+	and	v1, v1, ~(ST0_CU0 | ST0_MX)
 	.set	noat
 	mtc0	v1, CP0_STATUS
 	ehb
--- a/arch/mips/kvm/kvm_mips.c
+++ b/arch/mips/kvm/kvm_mips.c
@@ -15,6 +15,7 @@
 #include <linux/vmalloc.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
+#include <asm/fpu.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
@@ -418,6 +419,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v
 		vcpu->mmio_needed = 0;
 	}
 
+	lose_fpu(1);
+
 	local_irq_disable();
 	/* Check if we have any exceptions/interrupts pending */
 	kvm_mips_deliver_interrupts(vcpu,
@@ -1021,9 +1024,6 @@ void kvm_mips_set_c0_status(void)
 {
 	uint32_t status = read_c0_status();
 
-	if (cpu_has_fpu)
-		status |= (ST0_CU1);
-
 	if (cpu_has_dsp)
 		status |= (ST0_MX);
 

[PATCH 3.14 59/73] KVM: x86: update masterclock values on TSC writes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcelo Tosatti <mtosatti@redhat.com>

commit 7f187922ddf6b67f2999a76dcb71663097b75497 upstream.

When the guest writes to the TSC, the masterclock TSC copy must be
updated as well along with the TSC_OFFSET update, otherwise a negative
tsc_timestamp is calculated at kvm_guest_time_update.

Once "if (!vcpus_matched && ka->use_master_clock)" is simplified to
"if (ka->use_master_clock)", the corresponding "if (!ka->use_master_clock)"
becomes redundant, so remove the do_request boolean and collapse
everything into a single condition.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1207,21 +1207,22 @@ void kvm_track_tsc_matching(struct kvm_v
 {
 #ifdef CONFIG_X86_64
 	bool vcpus_matched;
-	bool do_request = false;
 	struct kvm_arch *ka = &vcpu->kvm->arch;
 	struct pvclock_gtod_data *gtod = &pvclock_gtod_data;
 
 	vcpus_matched = (ka->nr_vcpus_matched_tsc + 1 ==
 			 atomic_read(&vcpu->kvm->online_vcpus));
 
-	if (vcpus_matched && gtod->clock.vclock_mode == VCLOCK_TSC)
-		if (!ka->use_master_clock)
-			do_request = 1;
-
-	if (!vcpus_matched && ka->use_master_clock)
-			do_request = 1;
-
-	if (do_request)
+	/*
+	 * Once the masterclock is enabled, always perform request in
+	 * order to update it.
+	 *
+	 * In order to enable masterclock, the host clocksource must be TSC
+	 * and the vcpus need to have matched TSCs.  When that happens,
+	 * perform request to enable masterclock.
+	 */
+	if (ka->use_master_clock ||
+	    (gtod->clock.vclock_mode == VCLOCK_TSC && vcpus_matched))
 		kvm_make_request(KVM_REQ_MASTERCLOCK_UPDATE, vcpu);
 
 	trace_kvm_track_tsc(vcpu->vcpu_id, ka->nr_vcpus_matched_tsc,

[PATCH 3.14 60/73] hx4700: regulator: declare full constraints

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Vajnar <martin.vajnar@gmail.com>

commit a52d209336f8fc7483a8c7f4a8a7d2a8e1692a6c upstream.

Since the removal of CONFIG_REGULATOR_DUMMY option, the touchscreen stopped
working. This patch enables the "replacement" for REGULATOR_DUMMY and
allows the touchscreen to work even though there is no regulator for "vcc".

Signed-off-by: Martin Vajnar <martin.vajnar@gmail.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-pxa/hx4700.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -892,6 +892,8 @@ static void __init hx4700_init(void)
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
 	mdelay(10);
+
+	regulator_has_full_constraints();
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")

[PATCH 3.14 61/73] arm64: compat Fix siginfo_t -> compat_siginfo_t conversion on big endian

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Catalin Marinas <catalin.marinas@arm.com>

commit 9d42d48a342aee208c1154696196497fdc556bbf upstream.

The native (64-bit) sigval_t union contains sival_int (32-bit) and
sival_ptr (64-bit). When a compat application invokes a syscall that
takes a sigval_t value (as part of a larger structure, e.g.
compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t
union is converted to the native sigval_t with sival_int overlapping
with either the least or the most significant half of sival_ptr,
depending on endianness. When the corresponding signal is delivered to a
compat application, on big endian the current (compat_uptr_t)sival_ptr
cast always returns 0 since sival_int corresponds to the top part of
sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int
is copied to the compat_siginfo_t structure.

Reported-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Tested-by: Bamvor Jian Zhang <bamvor.zhangjian@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/kernel/signal32.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -151,8 +151,7 @@ int copy_siginfo_to_user32(compat_siginf
 	case __SI_TIMER:
 		 err |= __put_user(from->si_tid, &to->si_tid);
 		 err |= __put_user(from->si_overrun, &to->si_overrun);
-		 err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr,
-				   &to->si_ptr);
+		 err |= __put_user(from->si_int, &to->si_int);
 		break;
 	case __SI_POLL:
 		err |= __put_user(from->si_band, &to->si_band);
@@ -181,7 +180,7 @@ int copy_siginfo_to_user32(compat_siginf
 	case __SI_MESGQ: /* But this is */
 		err |= __put_user(from->si_pid, &to->si_pid);
 		err |= __put_user(from->si_uid, &to->si_uid);
-		err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
+		err |= __put_user(from->si_int, &to->si_int);
 		break;
 	default: /* this is just in case for now ... */
 		err |= __put_user(from->si_pid, &to->si_pid);

[PATCH 3.14 62/73] gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Holmberg <hans.holmberg@intel.com>

commit 9cf75e9e4ddd587ac12e88e8751c358b7b27e95f upstream.

The change:

7b8792bbdffdff3abda704f89c6a45ea97afdc62
gpiolib: of: Correct error handling in of_get_named_gpiod_flags

assumed that only one gpio-chip is registred per of-node.
Some drivers register more than one chip per of-node, so
adjust the matching function of_gpiochip_find_and_xlate to
not stop looking for chips if a node-match is found and
the translation fails.

Fixes: 7b8792bbdffd ("gpiolib: of: Correct error handling in of_get_named_gpiod_flags")
Signed-off-by: Hans Holmberg <hans.holmberg@intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib-of.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -45,12 +45,13 @@ static int of_gpiochip_find_and_xlate(st
 
 	ret = gc->of_xlate(gc, &gg_data->gpiospec, gg_data->flags);
 	if (ret < 0) {
-		/* We've found the gpio chip, but the translation failed.
-		 * Return true to stop looking and return the translation
-		 * error via out_gpio
+		/* We've found a gpio chip, but the translation failed.
+		 * Store translation error in out_gpio.
+		 * Return false to keep looking, as more than one gpio chip
+		 * could be registered per of-node.
 		 */
 		gg_data->out_gpio = ERR_PTR(ret);
-		return true;
+		return false;
 	 }
 
 	gg_data->out_gpio = gpio_to_desc(ret + gc->base);

[PATCH 3.14 63/73] gpio: tps65912: fix wrong container_of arguments

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>

commit 2f97c20e5f7c3582c7310f65a04465bfb0fd0e85 upstream.

The gpio_chip operations receive a pointer the gpio_chip struct which is
contained in the driver's private struct, yet the container_of call in those
functions point to the mfd struct defined in include/linux/mfd/tps65912.h.

Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-tps65912.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/gpio/gpio-tps65912.c
+++ b/drivers/gpio/gpio-tps65912.c
@@ -26,9 +26,12 @@ struct tps65912_gpio_data {
 	struct gpio_chip gpio_chip;
 };
 
+#define to_tgd(gc) container_of(gc, struct tps65912_gpio_data, gpio_chip)
+
 static int tps65912_gpio_get(struct gpio_chip *gc, unsigned offset)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 	int val;
 
 	val = tps65912_reg_read(tps65912, TPS65912_GPIO1 + offset);
@@ -42,7 +45,8 @@ static int tps65912_gpio_get(struct gpio
 static void tps65912_gpio_set(struct gpio_chip *gc, unsigned offset,
 			      int value)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	if (value)
 		tps65912_set_bits(tps65912, TPS65912_GPIO1 + offset,
@@ -55,7 +59,8 @@ static void tps65912_gpio_set(struct gpi
 static int tps65912_gpio_output(struct gpio_chip *gc, unsigned offset,
 				int value)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	/* Set the initial value */
 	tps65912_gpio_set(gc, offset, value);
@@ -66,7 +71,8 @@ static int tps65912_gpio_output(struct g
 
 static int tps65912_gpio_input(struct gpio_chip *gc, unsigned offset)
 {
-	struct tps65912 *tps65912 = container_of(gc, struct tps65912, gpio);
+	struct tps65912_gpio_data *tps65912_gpio = to_tgd(gc);
+	struct tps65912 *tps65912 = tps65912_gpio->tps65912;
 
 	return tps65912_clear_bits(tps65912, TPS65912_GPIO1 + offset,
 								GPIO_CFG_MASK);

[PATCH 3.14 64/73] xfs: Fix quota type in quota structures when reusing quota file

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit dfcc70a8c868fe03276fa59864149708fb41930b upstream.

For filesystems without separate project quota inode field in the
superblock we just reuse project quota file for group quotas (and vice
versa) if project quota file is allocated and we need group quota file.
When we reuse the file, quota structures on disk suddenly have wrong
type stored in d_flags though. Nobody really cares about this (although
structure type reported to userspace was wrong as well) except
that after commit 14bf61ffe6ac (quota: Switch ->get_dqblk() and
->set_dqblk() to use bytes as space units) assertion in
xfs_qm_scall_getquota() started to trigger on xfs/106 test (apparently I
was testing without XFS_DEBUG so I didn't notice when submitting the
above commit).

Fix the problem by properly resetting ddq->d_flags when running quotacheck
for a quota file.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_qm.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/xfs/xfs_qm.c
+++ b/fs/xfs/xfs_qm.c
@@ -1108,6 +1108,11 @@ xfs_qm_reset_dqcounts(
 		 */
 		xfs_dqcheck(mp, ddq, id+j, type, XFS_QMOPT_DQREPAIR,
 			    "xfs_quotacheck");
+		/*
+		 * Reset type in case we are reusing group quota file for
+		 * project quotas or vice versa
+		 */
+		ddq->d_flags = type;
 		ddq->d_bcount = 0;
 		ddq->d_icount = 0;
 		ddq->d_rtbcount = 0;

[PATCH 3.14 65/73] metag: Fix KSTK_EIP() and KSTK_ESP() macros

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit c2996cb29bfb73927a79dc96e598a718e843f01a upstream.

The KSTK_EIP() and KSTK_ESP() macros should return the user program
counter (PC) and stack pointer (A0StP) of the given task. These are used
to determine which VMA corresponds to the user stack in
/proc/<pid>/maps, and for the user PC & A0StP in /proc/<pid>/stat.

However for Meta the PC & A0StP from the task's kernel context are used,
resulting in broken output. For example in following /proc/<pid>/maps
output, the 3afff000-3b021000 VMA should be described as the stack:

  # cat /proc/self/maps
  ...
  100b0000-100b1000 rwxp 00000000 00:00 0          [heap]
  3afff000-3b021000 rwxp 00000000 00:00 0

And in the following /proc/<pid>/stat output, the PC is in kernel code
(1074234964 = 0x40078654) and the A0StP is in the kernel heap
(1335981392 = 0x4fa17550):

  # cat /proc/self/stat
  51 (cat) R ... 1335981392 1074234964 ...

Fix the definitions of KSTK_EIP() and KSTK_ESP() to use
task_pt_regs(tsk)->ctx rather than (tsk)->thread.kernel_context. This
gets the registers from the user context stored after the thread info at
the base of the kernel stack, which is from the last entry into the
kernel from userland, regardless of where in the kernel the task may
have been interrupted, which results in the following more correct
/proc/<pid>/maps output:

  # cat /proc/self/maps
  ...
  0800b000-08070000 r-xp 00000000 00:02 207        /lib/libuClibc-0.9.34-git.so
  ...
  100b0000-100b1000 rwxp 00000000 00:00 0          [heap]
  3afff000-3b021000 rwxp 00000000 00:00 0          [stack]

And /proc/<pid>/stat now correctly reports the PC in libuClibc
(134320308 = 0x80190b4) and the A0StP in the [stack] region (989864576 =
0x3b002280):

  # cat /proc/self/stat
  51 (cat) R ... 989864576 134320308 ...

Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/include/asm/processor.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/metag/include/asm/processor.h
+++ b/arch/metag/include/asm/processor.h
@@ -149,8 +149,8 @@ extern void exit_thread(void);
 
 unsigned long get_wchan(struct task_struct *p);
 
-#define	KSTK_EIP(tsk)	((tsk)->thread.kernel_context->CurrPC)
-#define	KSTK_ESP(tsk)	((tsk)->thread.kernel_context->AX[0].U0)
+#define	KSTK_EIP(tsk)	(task_pt_regs(tsk)->ctx.CurrPC)
+#define	KSTK_ESP(tsk)	(task_pt_regs(tsk)->ctx.AX[0].U0)
 
 #define user_stack_pointer(regs)        ((regs)->ctx.AX[0].U0)
 

[PATCH 3.14 66/73] md/raid5: Fix livelock when array is both resyncing and degraded.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.de>

commit 26ac107378c4742978216be1005b7291b799c7b2 upstream.

Commit a7854487cd7128a30a7f4f5259de9f67d5efb95f:
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.

Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.

Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.

So change the condition to only force RCW on non-degraded arrays.

Reported-by: Manibalan P <pmanibalan@amiindia.co.in>
Bisected-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: a7854487cd7128a30a7f4f5259de9f67d5efb95f
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/raid5.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3071,7 +3071,8 @@ static void handle_stripe_dirtying(struc
 	 * generate correct data from the parity.
 	 */
 	if (conf->max_degraded == 2 ||
-	    (recovery_cp < MaxSector && sh->sector >= recovery_cp)) {
+	    (recovery_cp < MaxSector && sh->sector >= recovery_cp &&
+	     s->failed == 0)) {
 		/* Calculate the real rcw later - for now make it
 		 * look like rcw is cheaper
 		 */

[PATCH 3.14 68/73] EDAC, amd64_edac: Prevent OOPS with >16 memory controllers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel J Blueman <daniel@numascale.com>

commit 0c510cc83bdbaac8406f4f7caef34f4da0ba35ea upstream.

When DRAM errors occur on memory controllers after EDAC_MAX_MCS (16),
the kernel fatally dereferences unallocated structures, see splat below;
this occurs on at least NumaConnect systems.

Fix by checking if a memory controller info structure was found.

BUG: unable to handle kernel NULL pointer dereference at 0000000000000320
IP: [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0
PGD 2f8b5a3067 PUD 2f8b5a2067 PMD 0
Oops: 0000 [#2] SMP
Modules linked in:
CPU: 224 PID: 11930 Comm: stream_c.exe.gn Tainted: G   D    3.19.0 #1
Hardware name: Supermicro H8QGL/H8QGL, BIOS 3.5b    01/28/2015
task: ffff8807dbfb8c00 ti: ffff8807dd16c000 task.ti: ffff8807dd16c000
RIP: 0010:[<ffffffff819f714f>] [<ffffffff819f714f>] decode_bus_error+0x2f/0x2b0
RSP: 0000:ffff8907dfc03c48 EFLAGS: 00010297
RAX: 0000000000000001 RBX: 9c67400010080a13 RCX: 0000000000001dc6
RDX: 000000001dc61dc6 RSI: ffff8907dfc03df0 RDI: 000000000000001c
RBP: ffff8907dfc03ce8 R08: 0000000000000000 R09: 0000000000000022
R10: ffff891fffa30380 R11: 00000000001cfc90 R12: 0000000000000008
R13: 0000000000000000 R14: 000000000000001c R15: 00009c6740001000
FS: 00007fa97ee18700(0000) GS:ffff8907dfc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000320 CR3: 0000003f889b8000 CR4: 00000000000407e0
Stack:
 0000000000000000 ffff8907dfc03df0 0000000000000008 9c67400010080a13
 000000000000001c 00009c6740001000 ffff8907dfc03c88 ffffffff810e4f9a
 ffff8907dfc03ce8 ffffffff81b375b9 0000000000000000 0000000000000010
Call Trace:
 <IRQ>
 ? vprintk_default
 ? printk
 amd_decode_mce
 notifier_call_chain
 atomic_notifier_call_chain
 mce_log
 machine_check_poll
 mce_timer_fn
 ? mce_cpu_restart
 call_timer_fn.isra.29
 run_timer_softirq
 __do_softirq
 irq_exit
 smp_apic_timer_interrupt
 apic_timer_interrupt
 <EOI>
 ? down_read_trylock
 __do_page_fault
 ? __schedule
 do_page_fault
 page_fault

Signed-off-by: Daniel J Blueman <daniel@numascale.com>
Link: http://lkml.kernel.org/r/1424144078-24589-1-git-send-email-daniel@numascale.com
[ Boris: massage commit message ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/edac/amd64_edac.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2006,14 +2006,20 @@ static void __log_bus_error(struct mem_c
 
 static inline void decode_bus_error(int node_id, struct mce *m)
 {
-	struct mem_ctl_info *mci = mcis[node_id];
-	struct amd64_pvt *pvt = mci->pvt_info;
+	struct mem_ctl_info *mci;
+	struct amd64_pvt *pvt;
 	u8 ecc_type = (m->status >> 45) & 0x3;
 	u8 xec = XEC(m->status, 0x1f);
 	u16 ec = EC(m->status);
 	u64 sys_addr;
 	struct err_info err;
 
+	mci = edac_mc_find(node_id);
+	if (!mci)
+		return;
+
+	pvt = mci->pvt_info;
+
 	/* Bail out early if this was an 'observed' error */
 	if (PP(ec) == NBSL_PP_OBS)
 		return;

[PATCH 3.14 69/73] jffs2: fix handling of corrupted summary length

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Jie <chenjie6@huawei.com>

commit 164c24063a3eadee11b46575c5482b2f1417be49 upstream.

sm->offset maybe wrong but magic maybe right, the offset do not have CRC.

Badness at c00c7580 [verbose debug info unavailable]
NIP: c00c7580 LR: c00c718c CTR: 00000014
REGS: df07bb40 TRAP: 0700   Not tainted  (2.6.34.13-WR4.3.0.0_standard)
MSR: 00029000 <EE,ME,CE>  CR: 22084f84  XER: 00000000
TASK = df84d6e0[908] 'mount' THREAD: df07a000
GPR00: 00000001 df07bbf0 df84d6e0 00000000 00000001 00000000 df07bb58 00000041
GPR08: 00000041 c0638860 00000000 00000010 22084f88 100636c8 df814ff8 00000000
GPR16: df84d6e0 dfa558cc c05adb90 00000048 c0452d30 00000000 000240d0 000040d0
GPR24: 00000014 c05ae734 c05be2e0 00000000 00000001 00000000 00000000 c05ae730
NIP [c00c7580] __alloc_pages_nodemask+0x4d0/0x638
LR [c00c718c] __alloc_pages_nodemask+0xdc/0x638
Call Trace:
[df07bbf0] [c00c718c] __alloc_pages_nodemask+0xdc/0x638 (unreliable)
[df07bc90] [c00c7708] __get_free_pages+0x20/0x48
[df07bca0] [c00f4a40] __kmalloc+0x15c/0x1ec
[df07bcd0] [c01fc880] jffs2_scan_medium+0xa58/0x14d0
[df07bd70] [c01ff38c] jffs2_do_mount_fs+0x1f4/0x6b4
[df07bdb0] [c020144c] jffs2_do_fill_super+0xa8/0x260
[df07bdd0] [c020230c] jffs2_fill_super+0x104/0x184
[df07be00] [c0335814] get_sb_mtd_aux+0x9c/0xec
[df07be20] [c033596c] get_sb_mtd+0x84/0x1e8
[df07be60] [c0201ed0] jffs2_get_sb+0x1c/0x2c
[df07be70] [c0103898] vfs_kern_mount+0x78/0x1e8
[df07bea0] [c0103a58] do_kern_mount+0x40/0x100
[df07bec0] [c011fe90] do_mount+0x240/0x890
[df07bf10] [c0120570] sys_mount+0x90/0xd8
[df07bf40] [c00110d8] ret_from_syscall+0x0/0x4

=== Exception: c01 at 0xff61a34
    LR = 0x100135f0
Instruction dump:
38800005 38600000 48010f41 4bfffe1c 4bfc2d15 4bfffe8c 72e90200 4082fc28
3d20c064 39298860 8809000d 68000001 <0f000000> 2f800000 419efc0c 38000001
mount: mounting /dev/mtdblock3 on /common failed: Input/output error

Signed-off-by: Chen Jie <chenjie6@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jffs2/scan.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/jffs2/scan.c
+++ b/fs/jffs2/scan.c
@@ -510,6 +510,10 @@ static int jffs2_scan_eraseblock (struct
 				sumlen = c->sector_size - je32_to_cpu(sm->offset);
 				sumptr = buf + buf_size - sumlen;
 
+				/* sm->offset maybe wrong but MAGIC maybe right */
+				if (sumlen > c->sector_size)
+					goto full_scan;
+
 				/* Now, make sure the summary itself is available */
 				if (sumlen > buf_size) {
 					/* Need to kmalloc for this. */
@@ -544,6 +548,7 @@ static int jffs2_scan_eraseblock (struct
 		}
 	}
 
+full_scan:
 	buf_ofs = jeb->offset;
 
 	if (!buf_size) {

[PATCH 3.14 70/73] btrfs: set proper message level for skinny metadata

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.cz>

commit 5efa0490cc94aee06cd8d282683e22a8ce0a0026 upstream.

This has been confusing people for too long, the message is really just
informative.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/disk-io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2411,7 +2411,7 @@ int open_ctree(struct super_block *sb,
 		features |= BTRFS_FEATURE_INCOMPAT_COMPRESS_LZO;
 
 	if (features & BTRFS_FEATURE_INCOMPAT_SKINNY_METADATA)
-		printk(KERN_ERR "BTRFS: has skinny extents\n");
+		printk(KERN_INFO "BTRFS: has skinny extents\n");
 
 	/*
 	 * flag our filesystem as having big metadata blocks if

[PATCH 3.14 71/73] btrfs: fix leak of path in btrfs_find_item

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Sterba <dsterba@suse.cz>

commit 381cf6587f8a8a8e981bc0c1aaaa8859b51dc756 upstream.

If btrfs_find_item is called with NULL path it allocates one locally but
does not free it. Affected paths are inserting an orphan item for a file
and for a subvol root.

Move the path allocation to the callers.

Fixes: 3f870c289900 ("btrfs: expand btrfs_find_item() to include find_orphan_item functionality")
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/ctree.c    |   17 ++++-------------
 fs/btrfs/disk-io.c  |    9 ++++++++-
 fs/btrfs/tree-log.c |   11 ++++++++++-
 3 files changed, 22 insertions(+), 15 deletions(-)

--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2655,32 +2655,23 @@ static int key_search(struct extent_buff
 	return 0;
 }
 
-int btrfs_find_item(struct btrfs_root *fs_root, struct btrfs_path *found_path,
+int btrfs_find_item(struct btrfs_root *fs_root, struct btrfs_path *path,
 		u64 iobjectid, u64 ioff, u8 key_type,
 		struct btrfs_key *found_key)
 {
 	int ret;
 	struct btrfs_key key;
 	struct extent_buffer *eb;
-	struct btrfs_path *path;
+
+	ASSERT(path);
 
 	key.type = key_type;
 	key.objectid = iobjectid;
 	key.offset = ioff;
 
-	if (found_path == NULL) {
-		path = btrfs_alloc_path();
-		if (!path)
-			return -ENOMEM;
-	} else
-		path = found_path;
-
 	ret = btrfs_search_slot(NULL, fs_root, &key, path, 0, 0);
-	if ((ret < 0) || (found_key == NULL)) {
-		if (path != found_path)
-			btrfs_free_path(path);
+	if ((ret < 0) || (found_key == NULL))
 		return ret;
-	}
 
 	eb = path->nodes[0];
 	if (ret && path->slots[0] >= btrfs_header_nritems(eb)) {
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1560,6 +1560,7 @@ struct btrfs_root *btrfs_get_fs_root(str
 				     bool check_ref)
 {
 	struct btrfs_root *root;
+	struct btrfs_path *path;
 	int ret;
 
 	if (location->objectid == BTRFS_ROOT_TREE_OBJECTID)
@@ -1599,8 +1600,14 @@ again:
 	if (ret)
 		goto fail;
 
-	ret = btrfs_find_item(fs_info->tree_root, NULL, BTRFS_ORPHAN_OBJECTID,
+	path = btrfs_alloc_path();
+	if (!path) {
+		ret = -ENOMEM;
+		goto fail;
+	}
+	ret = btrfs_find_item(fs_info->tree_root, path, BTRFS_ORPHAN_OBJECTID,
 			location->objectid, BTRFS_ORPHAN_ITEM_KEY, NULL);
+	btrfs_free_path(path);
 	if (ret < 0)
 		goto fail;
 	if (ret == 0)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1238,10 +1238,19 @@ static int insert_orphan_item(struct btr
 			      struct btrfs_root *root, u64 offset)
 {
 	int ret;
-	ret = btrfs_find_item(root, NULL, BTRFS_ORPHAN_OBJECTID,
+	struct btrfs_path *path;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+
+	ret = btrfs_find_item(root, path, BTRFS_ORPHAN_OBJECTID,
 			offset, BTRFS_ORPHAN_ITEM_KEY, NULL);
 	if (ret > 0)
 		ret = btrfs_insert_orphan_item(trans, root, offset);
+
+	btrfs_free_path(path);
+
 	return ret;
 }
 

[PATCH 3.14 72/73] blk-throttle: check stats_cpu before reading it from sysfs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>

commit 045c47ca306acf30c740c285a77a4b4bda6be7c5 upstream.

When reading blkio.throttle.io_serviced in a recently created blkio
cgroup, it's possible to race against the creation of a throttle policy,
which delays the allocation of stats_cpu.

Like other functions in the throttle code, just checking for a NULL
stats_cpu prevents the following oops caused by that race.

[ 1117.285199] Unable to handle kernel paging request for data at address 0x7fb4d0020
[ 1117.285252] Faulting instruction address: 0xc0000000003efa2c
[ 1137.733921] Oops: Kernel access of bad area, sig: 11 [#1]
[ 1137.733945] SMP NR_CPUS=2048 NUMA PowerNV
[ 1137.734025] Modules linked in: bridge stp llc kvm_hv kvm binfmt_misc autofs4
[ 1137.734102] CPU: 3 PID: 5302 Comm: blkcgroup Not tainted 3.19.0 #5
[ 1137.734132] task: c000000f1d188b00 ti: c000000f1d210000 task.ti: c000000f1d210000
[ 1137.734167] NIP: c0000000003efa2c LR: c0000000003ef9f0 CTR: c0000000003ef980
[ 1137.734202] REGS: c000000f1d213500 TRAP: 0300   Not tainted  (3.19.0)
[ 1137.734230] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI>  CR: 42008884  XER: 20000000
[ 1137.734325] CFAR: 0000000000008458 DAR: 00000007fb4d0020 DSISR: 40000000 SOFTE: 0
GPR00: c0000000003ed3a0 c000000f1d213780 c000000000c59538 0000000000000000
GPR04: 0000000000000800 0000000000000000 0000000000000000 0000000000000000
GPR08: ffffffffffffffff 00000007fb4d0020 00000007fb4d0000 c000000000780808
GPR12: 0000000022000888 c00000000fdc0d80 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 000001003e120200 c000000f1d5b0cc0 0000000000000200 0000000000000000
GPR24: 0000000000000001 c000000000c269e0 0000000000000020 c000000f1d5b0c80
GPR28: c000000000ca3a08 c000000000ca3dec c000000f1c667e00 c000000f1d213850
[ 1137.734886] NIP [c0000000003efa2c] .tg_prfill_cpu_rwstat+0xac/0x180
[ 1137.734915] LR [c0000000003ef9f0] .tg_prfill_cpu_rwstat+0x70/0x180
[ 1137.734943] Call Trace:
[ 1137.734952] [c000000f1d213780] [d000000005560520] 0xd000000005560520 (unreliable)
[ 1137.734996] [c000000f1d2138a0] [c0000000003ed3a0] .blkcg_print_blkgs+0xe0/0x1a0
[ 1137.735039] [c000000f1d213960] [c0000000003efb50] .tg_print_cpu_rwstat+0x50/0x70
[ 1137.735082] [c000000f1d2139e0] [c000000000104b48] .cgroup_seqfile_show+0x58/0x150
[ 1137.735125] [c000000f1d213a70] [c0000000002749dc] .kernfs_seq_show+0x3c/0x50
[ 1137.735161] [c000000f1d213ae0] [c000000000218630] .seq_read+0xe0/0x510
[ 1137.735197] [c000000f1d213bd0] [c000000000275b04] .kernfs_fop_read+0x164/0x200
[ 1137.735240] [c000000f1d213c80] [c0000000001eb8e0] .__vfs_read+0x30/0x80
[ 1137.735276] [c000000f1d213cf0] [c0000000001eb9c4] .vfs_read+0x94/0x1b0
[ 1137.735312] [c000000f1d213d90] [c0000000001ebb38] .SyS_read+0x58/0x100
[ 1137.735349] [c000000f1d213e30] [c000000000009218] syscall_exit+0x0/0x98
[ 1137.735383] Instruction dump:
[ 1137.735405] 7c6307b4 7f891800 409d00b8 60000000 60420000 3d420004 392a63b0 786a1f24
[ 1137.735471] 7d49502a e93e01c8 7d495214 7d2ad214 <7cead02a> e9090008 e9490010 e9290018

And here is one code that allows to easily reproduce this, although this
has first been found by running docker.

void run(pid_t pid)
{
	int n;
	int status;
	int fd;
	char *buffer;
	buffer = memalign(BUFFER_ALIGN, BUFFER_SIZE);
	n = snprintf(buffer, BUFFER_SIZE, "%d\n", pid);
	fd = open(CGPATH "/test/tasks", O_WRONLY);
	write(fd, buffer, n);
	close(fd);
	if (fork() > 0) {
		fd = open("/dev/sda", O_RDONLY | O_DIRECT);
		read(fd, buffer, 512);
		close(fd);
		wait(&status);
	} else {
		fd = open(CGPATH "/test/blkio.throttle.io_serviced", O_RDONLY);
		n = read(fd, buffer, BUFFER_SIZE);
		close(fd);
	}
	free(buffer);
	exit(0);
}

void test(void)
{
	int status;
	mkdir(CGPATH "/test", 0666);
	if (fork() > 0)
		wait(&status);
	else
		run(getpid());
	rmdir(CGPATH "/test");
}

int main(int argc, char **argv)
{
	int i;
	for (i = 0; i < NR_TESTS; i++)
		test();
	return 0;
}

Reported-by: Ricardo Marin Matinata <rmm@br.ibm.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-throttle.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -1292,6 +1292,9 @@ static u64 tg_prfill_cpu_rwstat(struct s
 	struct blkg_rwstat rwstat = { }, tmp;
 	int i, cpu;
 
+	if (tg->stats_cpu == NULL)
+		return 0;
+
 	for_each_possible_cpu(cpu) {
 		struct tg_stats_cpu *sc = per_cpu_ptr(tg->stats_cpu, cpu);
 

[PATCH 3.14 73/73] x86, mm/ASLR: Fix stack randomization on 64-bit systems

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hector Marco-Gisbert <hecmargi@upv.es>

commit 4e7c22d447bb6d7e37bfe39ff658486ae78e8d77 upstream.

The issue is that the stack for processes is not properly randomized on
64 bit architectures due to an integer overflow.

The affected function is randomize_stack_top() in file
"fs/binfmt_elf.c":

  static unsigned long randomize_stack_top(unsigned long stack_top)
  {
           unsigned int random_variable = 0;

           if ((current->flags & PF_RANDOMIZE) &&
                   !(current->personality & ADDR_NO_RANDOMIZE)) {
                   random_variable = get_random_int() & STACK_RND_MASK;
                   random_variable <<= PAGE_SHIFT;
           }
           return PAGE_ALIGN(stack_top) + random_variable;
           return PAGE_ALIGN(stack_top) - random_variable;
  }

Note that, it declares the "random_variable" variable as "unsigned int".
Since the result of the shifting operation between STACK_RND_MASK (which
is 0x3fffff on x86_64, 22 bits) and PAGE_SHIFT (which is 12 on x86_64):

	  random_variable <<= PAGE_SHIFT;

then the two leftmost bits are dropped when storing the result in the
"random_variable". This variable shall be at least 34 bits long to hold
the (22+12) result.

These two dropped bits have an impact on the entropy of process stack.
Concretely, the total stack entropy is reduced by four: from 2^28 to
2^30 (One fourth of expected entropy).

This patch restores back the entropy by correcting the types involved
in the operations in the functions randomize_stack_top() and
stack_maxrandom_size().

The successful fix can be tested with:

  $ for i in `seq 1 10`; do cat /proc/self/maps | grep stack; done
  7ffeda566000-7ffeda587000 rw-p 00000000 00:00 0                          [stack]
  7fff5a332000-7fff5a353000 rw-p 00000000 00:00 0                          [stack]
  7ffcdb7a1000-7ffcdb7c2000 rw-p 00000000 00:00 0                          [stack]
  7ffd5e2c4000-7ffd5e2e5000 rw-p 00000000 00:00 0                          [stack]
  ...

Once corrected, the leading bytes should be between 7ffc and 7fff,
rather than always being 7fff.

Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es>
Signed-off-by: Ismael Ripoll <iripoll@upv.es>
[ Rebased, fixed 80 char bugs, cleaned up commit message, added test example and CVE ]
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: CVE-2015-1593
Link: http://lkml.kernel.org/r/20150214173350.GA18393@www.outflux.net
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/mmap.c |    6 +++---
 fs/binfmt_elf.c    |    5 +++--
 2 files changed, 6 insertions(+), 5 deletions(-)

--- a/arch/x86/mm/mmap.c
+++ b/arch/x86/mm/mmap.c
@@ -35,12 +35,12 @@ struct __read_mostly va_alignment va_ali
 	.flags = -1,
 };
 
-static unsigned int stack_maxrandom_size(void)
+static unsigned long stack_maxrandom_size(void)
 {
-	unsigned int max = 0;
+	unsigned long max = 0;
 	if ((current->flags & PF_RANDOMIZE) &&
 		!(current->personality & ADDR_NO_RANDOMIZE)) {
-		max = ((-1U) & STACK_RND_MASK) << PAGE_SHIFT;
+		max = ((-1UL) & STACK_RND_MASK) << PAGE_SHIFT;
 	}
 
 	return max;
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -549,11 +549,12 @@ out:
 
 static unsigned long randomize_stack_top(unsigned long stack_top)
 {
-	unsigned int random_variable = 0;
+	unsigned long random_variable = 0;
 
 	if ((current->flags & PF_RANDOMIZE) &&
 		!(current->personality & ADDR_NO_RANDOMIZE)) {
-		random_variable = get_random_int() & STACK_RND_MASK;
+		random_variable = (unsigned long) get_random_int();
+		random_variable &= STACK_RND_MASK;
 		random_variable <<= PAGE_SHIFT;
 	}
 #ifdef CONFIG_STACK_GROWSUP

Re: [PATCH 3.14 58/73] KVM: MIPS: Dont leak FPU/DSP to guest

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 4605 bytes --]

Hi Greg,

On Tue, Mar 03, 2015 at 10:13:26PM -0800, Greg Kroah-Hartman wrote:
> 3.14-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: James Hogan <james.hogan@imgtec.com>
> 
> commit f798217dfd038af981a18bbe4bc57027a08bb182 upstream.
> 
> The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by
> kvm_mips_set_c0_status() on a guest exit, presumably in case there is
> active state that needs saving if pre-emption occurs. However neither of
> these bits are cleared again when returning to the guest.
> 
> This effectively gives the guest access to the FPU/DSP hardware after
> the first guest exit even though it is not aware of its presence,
> allowing FP instructions in guest user code to intermittently actually
> execute instead of trapping into the guest OS for emulation. It will
> then read & manipulate the hardware FP registers which technically
> belong to the user process (e.g. QEMU), or are stale from another user
> process. It can also crash the guest OS by causing an FP exception, for
> which a guest exception handler won't have been registered.
> 
> First lets save and disable the FPU (and MSA) state with lose_fpu(1)
> before entering the guest. This simplifies the problem, especially for
> when guest FPU/MSA support is added in the future, and prevents FR=1 FPU
> state being live when the FR bit gets cleared for the guest, which
> according to the architecture causes the contents of the FPU and vector
> registers to become UNPREDICTABLE.
> 
> We can then safely remove the enabling of the FPU in
> kvm_mips_set_c0_status(), since there should never be any active FPU or
> MSA state to save at pre-emption, which should plug the FPU leak.
> 
> DSP state is always live rather than being lazily restored, so for that
> it is simpler to just clear the MX bit again when re-entering the guest.
> 
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Sanjay Lal <sanjayl@kymasys.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: kvm@vger.kernel.org
> Cc: linux-mips@linux-mips.org
> Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts

The original 3.10 and 3.12/3.14 backports had this added:
Cc: <stable@vger.kernel.org> # v3.10+: 3ce465e04bfd: MIPS: Export FP functions used by lose_fpu(1) for KVM                                         
Which I can't see included in the v3.10 stable queue or branch. It fixes
a build error with MIPS malta_kvm_defconfig (MIPS=y, KVM=m) after this
patch is applied.

Same applies to the 3.14 queue too I think.

Cheers
James

> Cc: <stable@vger.kernel.org> # v3.10+
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> This should apply to stable trees 3.12 and 3.14, but not 3.10. The files
> had been renamed since v3.14 so it cherry-picked cleanly but the patch
> didn't apply cleanly. I've also added a reference to the "MIPS: Export
> FP functions used by lose_fpu(1) for KVM" commit which is itself marked
> for stable, but is needed to avoid a build failure when KVM=m.
> ---
>  arch/mips/kvm/kvm_locore.S |    2 +-
>  arch/mips/kvm/kvm_mips.c   |    6 +++---
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> --- a/arch/mips/kvm/kvm_locore.S
> +++ b/arch/mips/kvm/kvm_locore.S
> @@ -428,7 +428,7 @@ __kvm_mips_return_to_guest:
>  	/* Setup status register for running guest in UM */
>  	.set	at
>  	or	v1, v1, (ST0_EXL | KSU_USER | ST0_IE)
> -	and	v1, v1, ~ST0_CU0
> +	and	v1, v1, ~(ST0_CU0 | ST0_MX)
>  	.set	noat
>  	mtc0	v1, CP0_STATUS
>  	ehb
> --- a/arch/mips/kvm/kvm_mips.c
> +++ b/arch/mips/kvm/kvm_mips.c
> @@ -15,6 +15,7 @@
>  #include <linux/vmalloc.h>
>  #include <linux/fs.h>
>  #include <linux/bootmem.h>
> +#include <asm/fpu.h>
>  #include <asm/page.h>
>  #include <asm/cacheflush.h>
>  #include <asm/mmu_context.h>
> @@ -418,6 +419,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v
>  		vcpu->mmio_needed = 0;
>  	}
>  
> +	lose_fpu(1);
> +
>  	local_irq_disable();
>  	/* Check if we have any exceptions/interrupts pending */
>  	kvm_mips_deliver_interrupts(vcpu,
> @@ -1021,9 +1024,6 @@ void kvm_mips_set_c0_status(void)
>  {
>  	uint32_t status = read_c0_status();
>  
> -	if (cpu_has_fpu)
> -		status |= (ST0_CU1);
> -
>  	if (cpu_has_dsp)
>  		status |= (ST0_MX);
>  
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 3.14 58/73] KVM: MIPS: Dont leak FPU/DSP to guest

[James Hogan]

[-- Attachment #1: Type: text/plain, Size: 4605 bytes --]

Hi Greg,

On Tue, Mar 03, 2015 at 10:13:26PM -0800, Greg Kroah-Hartman wrote:
> 3.14-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: James Hogan <james.hogan@imgtec.com>
> 
> commit f798217dfd038af981a18bbe4bc57027a08bb182 upstream.
> 
> The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by
> kvm_mips_set_c0_status() on a guest exit, presumably in case there is
> active state that needs saving if pre-emption occurs. However neither of
> these bits are cleared again when returning to the guest.
> 
> This effectively gives the guest access to the FPU/DSP hardware after
> the first guest exit even though it is not aware of its presence,
> allowing FP instructions in guest user code to intermittently actually
> execute instead of trapping into the guest OS for emulation. It will
> then read & manipulate the hardware FP registers which technically
> belong to the user process (e.g. QEMU), or are stale from another user
> process. It can also crash the guest OS by causing an FP exception, for
> which a guest exception handler won't have been registered.
> 
> First lets save and disable the FPU (and MSA) state with lose_fpu(1)
> before entering the guest. This simplifies the problem, especially for
> when guest FPU/MSA support is added in the future, and prevents FR=1 FPU
> state being live when the FR bit gets cleared for the guest, which
> according to the architecture causes the contents of the FPU and vector
> registers to become UNPREDICTABLE.
> 
> We can then safely remove the enabling of the FPU in
> kvm_mips_set_c0_status(), since there should never be any active FPU or
> MSA state to save at pre-emption, which should plug the FPU leak.
> 
> DSP state is always live rather than being lazily restored, so for that
> it is simpler to just clear the MX bit again when re-entering the guest.
> 
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Sanjay Lal <sanjayl@kymasys.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: kvm@vger.kernel.org
> Cc: linux-mips@linux-mips.org
> Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts

The original 3.10 and 3.12/3.14 backports had this added:
Cc: <stable@vger.kernel.org> # v3.10+: 3ce465e04bfd: MIPS: Export FP functions used by lose_fpu(1) for KVM                                         
Which I can't see included in the v3.10 stable queue or branch. It fixes
a build error with MIPS malta_kvm_defconfig (MIPS=y, KVM=m) after this
patch is applied.

Same applies to the 3.14 queue too I think.

Cheers
James

> Cc: <stable@vger.kernel.org> # v3.10+
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
> This should apply to stable trees 3.12 and 3.14, but not 3.10. The files
> had been renamed since v3.14 so it cherry-picked cleanly but the patch
> didn't apply cleanly. I've also added a reference to the "MIPS: Export
> FP functions used by lose_fpu(1) for KVM" commit which is itself marked
> for stable, but is needed to avoid a build failure when KVM=m.
> ---
>  arch/mips/kvm/kvm_locore.S |    2 +-
>  arch/mips/kvm/kvm_mips.c   |    6 +++---
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> --- a/arch/mips/kvm/kvm_locore.S
> +++ b/arch/mips/kvm/kvm_locore.S
> @@ -428,7 +428,7 @@ __kvm_mips_return_to_guest:
>  	/* Setup status register for running guest in UM */
>  	.set	at
>  	or	v1, v1, (ST0_EXL | KSU_USER | ST0_IE)
> -	and	v1, v1, ~ST0_CU0
> +	and	v1, v1, ~(ST0_CU0 | ST0_MX)
>  	.set	noat
>  	mtc0	v1, CP0_STATUS
>  	ehb
> --- a/arch/mips/kvm/kvm_mips.c
> +++ b/arch/mips/kvm/kvm_mips.c
> @@ -15,6 +15,7 @@
>  #include <linux/vmalloc.h>
>  #include <linux/fs.h>
>  #include <linux/bootmem.h>
> +#include <asm/fpu.h>
>  #include <asm/page.h>
>  #include <asm/cacheflush.h>
>  #include <asm/mmu_context.h>
> @@ -418,6 +419,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_v
>  		vcpu->mmio_needed = 0;
>  	}
>  
> +	lose_fpu(1);
> +
>  	local_irq_disable();
>  	/* Check if we have any exceptions/interrupts pending */
>  	kvm_mips_deliver_interrupts(vcpu,
> @@ -1021,9 +1024,6 @@ void kvm_mips_set_c0_status(void)
>  {
>  	uint32_t status = read_c0_status();
>  
> -	if (cpu_has_fpu)
> -		status |= (ST0_CU1);
> -
>  	if (cpu_has_dsp)
>  		status |= (ST0_MX);
>  
> 
> 

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 3.14 00/73] 3.14.35-stable review

[Guenter Roeck]

On 03/03/2015 10:12 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.35 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Mar  6 05:52:50 UTC 2015.
> Anything received after that time might be too late.
>
Build results:
	total: 123 pass: 122 fail: 1
Failed builds:
	s390:defconfig

Qemu tests:
	total: 30 pass: 30 fail: 0

Same build failure and cause as with 3.10.

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.14 00/73] 3.14.35-stable review

[Greg Kroah-Hartman]

On Wed, Mar 04, 2015 at 06:11:38AM -0800, Guenter Roeck wrote:
> On 03/03/2015 10:12 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 3.14.35 release.
> >There are 73 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Fri Mar  6 05:52:50 UTC 2015.
> >Anything received after that time might be too late.
> >
> Build results:
> 	total: 123 pass: 122 fail: 1
> Failed builds:
> 	s390:defconfig
> 
> Qemu tests:
> 	total: 30 pass: 30 fail: 0
> 
> Same build failure and cause as with 3.10.

Should now be fixed, thanks.

greg k-h

Re: [PATCH 3.14 58/73] KVM: MIPS: Dont leak FPU/DSP to guest

[Greg Kroah-Hartman]

On Wed, Mar 04, 2015 at 08:10:40AM +0000, James Hogan wrote:
> Hi Greg,
> 
> On Tue, Mar 03, 2015 at 10:13:26PM -0800, Greg Kroah-Hartman wrote:
> > 3.14-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: James Hogan <james.hogan@imgtec.com>
> > 
> > commit f798217dfd038af981a18bbe4bc57027a08bb182 upstream.
> > 
> > The FPU and DSP are enabled via the CP0 Status CU1 and MX bits by
> > kvm_mips_set_c0_status() on a guest exit, presumably in case there is
> > active state that needs saving if pre-emption occurs. However neither of
> > these bits are cleared again when returning to the guest.
> > 
> > This effectively gives the guest access to the FPU/DSP hardware after
> > the first guest exit even though it is not aware of its presence,
> > allowing FP instructions in guest user code to intermittently actually
> > execute instead of trapping into the guest OS for emulation. It will
> > then read & manipulate the hardware FP registers which technically
> > belong to the user process (e.g. QEMU), or are stale from another user
> > process. It can also crash the guest OS by causing an FP exception, for
> > which a guest exception handler won't have been registered.
> > 
> > First lets save and disable the FPU (and MSA) state with lose_fpu(1)
> > before entering the guest. This simplifies the problem, especially for
> > when guest FPU/MSA support is added in the future, and prevents FR=1 FPU
> > state being live when the FR bit gets cleared for the guest, which
> > according to the architecture causes the contents of the FPU and vector
> > registers to become UNPREDICTABLE.
> > 
> > We can then safely remove the enabling of the FPU in
> > kvm_mips_set_c0_status(), since there should never be any active FPU or
> > MSA state to save at pre-emption, which should plug the FPU leak.
> > 
> > DSP state is always live rather than being lazily restored, so for that
> > it is simpler to just clear the MX bit again when re-entering the guest.
> > 
> > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > Cc: Paolo Bonzini <pbonzini@redhat.com>
> > Cc: Ralf Baechle <ralf@linux-mips.org>
> > Cc: Sanjay Lal <sanjayl@kymasys.com>
> > Cc: Gleb Natapov <gleb@kernel.org>
> > Cc: kvm@vger.kernel.org
> > Cc: linux-mips@linux-mips.org
> > Cc: <stable@vger.kernel.org> # v3.10+: 044f0f03eca0: MIPS: KVM: Deliver guest interrupts
> 
> The original 3.10 and 3.12/3.14 backports had this added:
> Cc: <stable@vger.kernel.org> # v3.10+: 3ce465e04bfd: MIPS: Export FP functions used by lose_fpu(1) for KVM                                         
> Which I can't see included in the v3.10 stable queue or branch. It fixes
> a build error with MIPS malta_kvm_defconfig (MIPS=y, KVM=m) after this
> patch is applied.
> 
> Same applies to the 3.14 queue too I think.

Odd, I remember having problems in this area and thought I had queued
this up.  It's now applied to both trees, thanks.

greg k-h

Re: [PATCH 3.14 00/73] 3.14.35-stable review

[Shuah Khan]

On 03/03/2015 11:12 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.35 release.
> There are 73 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Mar  6 05:52:50 UTC 2015.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.35-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

Re: [PATCH 3.14 00/73] 3.14.35-stable review

[Guenter Roeck]

On 03/04/2015 10:16 AM, Greg Kroah-Hartman wrote:
> On Wed, Mar 04, 2015 at 06:11:38AM -0800, Guenter Roeck wrote:
>> On 03/03/2015 10:12 PM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 3.14.35 release.
>>> There are 73 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Fri Mar  6 05:52:50 UTC 2015.
>>> Anything received after that time might be too late.
>>>
>> Build results:
>> 	total: 123 pass: 122 fail: 1
>> Failed builds:
>> 	s390:defconfig
>>
>> Qemu tests:
>> 	total: 30 pass: 30 fail: 0
>>
>> Same build failure and cause as with 3.10.
>
> Should now be fixed, thanks.
>
> greg k-h
>
Different failure now:

	total: 123 pass: 122 fail: 1
Failed builds:
	mips:cavium_octeon_defconfig

This affects both 3.10 and 3.14.

Build error:

arch/mips/built-in.o:(___ksymtab_gpl+_save_fp+0x0): undefined reference to `_save_fp'

Bisect points to 'MIPS: Export FP functions used by lose_fpu(1) for KVM'
by James Hogan as the culprit. That seemed unlikely, but reverting it
fixed the problem. Copying James for input, as the original patch is tagged
for 3.10+.

Guenter

[PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[James Hogan]

[ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]

Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m due to commit
f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):

ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10...3.15
Patchwork: https://patchwork.linux-mips.org/patch/9260/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
 so as not to break the Octeon build which excludes FPU support. KVM
 depends on MIPS32r2 anyway.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
Appologies for the previous cavium_octeon_defconfig link breakage.
Octeon has the symbol since 3.16, but not before. This backport should
do the trick for stable 3.10, 3.12, and 3.14. Build tested with
cavium_octeon_defconfig and malta_kvm_defconfig on those stable
branches.
---
 arch/mips/kernel/mips_ksyms.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 6e58e97fcd39..cedeb5686eb5 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <asm/uaccess.h>
 #include <asm/ftrace.h>
+#include <asm/fpu.h>
 
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_user_nocheck_asm(char *__to,
@@ -26,6 +27,13 @@ extern long __strnlen_user_nocheck_asm(const char *s);
 extern long __strnlen_user_asm(const char *s);
 
 /*
+ * Core architecture code
+ */
+#ifdef CONFIG_CPU_R4K_FPU
+EXPORT_SYMBOL_GPL(_save_fp);
+#endif
+
+/*
  * String functions
  */
 EXPORT_SYMBOL(memset);
-- 
2.0.5

[PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[James Hogan]

[ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]

Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
modules so that KVM can make use of it when it is built as a module.

This fixes the following build error when CONFIG_KVM=m due to commit
f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):

ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.10...3.15
Patchwork: https://patchwork.linux-mips.org/patch/9260/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
 so as not to break the Octeon build which excludes FPU support. KVM
 depends on MIPS32r2 anyway.]
Signed-off-by: James Hogan <james.hogan@imgtec.com>
---
Appologies for the previous cavium_octeon_defconfig link breakage.
Octeon has the symbol since 3.16, but not before. This backport should
do the trick for stable 3.10, 3.12, and 3.14. Build tested with
cavium_octeon_defconfig and malta_kvm_defconfig on those stable
branches.
---
 arch/mips/kernel/mips_ksyms.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index 6e58e97fcd39..cedeb5686eb5 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <asm/uaccess.h>
 #include <asm/ftrace.h>
+#include <asm/fpu.h>
 
 extern void *__bzero(void *__s, size_t __count);
 extern long __strncpy_from_user_nocheck_asm(char *__to,
@@ -26,6 +27,13 @@ extern long __strnlen_user_nocheck_asm(const char *s);
 extern long __strnlen_user_asm(const char *s);
 
 /*
+ * Core architecture code
+ */
+#ifdef CONFIG_CPU_R4K_FPU
+EXPORT_SYMBOL_GPL(_save_fp);
+#endif
+
+/*
  * String functions
  */
 EXPORT_SYMBOL(memset);
-- 
2.0.5

Re: [PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[Greg Kroah-Hartman]

On Thu, Mar 05, 2015 at 04:08:44PM +0000, James Hogan wrote:
> [ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]
> 
> Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
> modules so that KVM can make use of it when it is built as a module.
> 
> This fixes the following build error when CONFIG_KVM=m due to commit
> f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):
> 
> ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
> 
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Paul Burton <paul.burton@imgtec.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: kvm@vger.kernel.org
> Cc: linux-mips@linux-mips.org
> Cc: <stable@vger.kernel.org> # 3.10...3.15
> Patchwork: https://patchwork.linux-mips.org/patch/9260/
> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> [james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
>  so as not to break the Octeon build which excludes FPU support. KVM
>  depends on MIPS32r2 anyway.]
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> ---
> Appologies for the previous cavium_octeon_defconfig link breakage.
> Octeon has the symbol since 3.16, but not before. This backport should
> do the trick for stable 3.10, 3.12, and 3.14. Build tested with
> cavium_octeon_defconfig and malta_kvm_defconfig on those stable
> branches.
> ---
>  arch/mips/kernel/mips_ksyms.c | 8 ++++++++
>  1 file changed, 8 insertions(+)

Now fixed up, thanks.

greg k-h

Re: [PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[Guenter Roeck]

On Thu, Mar 05, 2015 at 10:30:34PM -0800, Greg Kroah-Hartman wrote:
> On Thu, Mar 05, 2015 at 04:08:44PM +0000, James Hogan wrote:
> > [ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]
> > 
> > Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
> > modules so that KVM can make use of it when it is built as a module.
> > 
> > This fixes the following build error when CONFIG_KVM=m due to commit
> > f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):
> > 
> > ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
> > 
> > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
> > Cc: Paolo Bonzini <pbonzini@redhat.com>
> > Cc: Ralf Baechle <ralf@linux-mips.org>
> > Cc: Paul Burton <paul.burton@imgtec.com>
> > Cc: Gleb Natapov <gleb@kernel.org>
> > Cc: kvm@vger.kernel.org
> > Cc: linux-mips@linux-mips.org
> > Cc: <stable@vger.kernel.org> # 3.10...3.15
> > Patchwork: https://patchwork.linux-mips.org/patch/9260/
> > Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> > [james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
> >  so as not to break the Octeon build which excludes FPU support. KVM
> >  depends on MIPS32r2 anyway.]
> > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > ---
> > Appologies for the previous cavium_octeon_defconfig link breakage.
> > Octeon has the symbol since 3.16, but not before. This backport should
> > do the trick for stable 3.10, 3.12, and 3.14. Build tested with
> > cavium_octeon_defconfig and malta_kvm_defconfig on those stable
> > branches.
> > ---
> >  arch/mips/kernel/mips_ksyms.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> 
> Now fixed up, thanks.
> 
My auto-builders still fail to build cavium_octeon_defconfig for 3.10 and 3.14,
and as far as I can see they picked up no changes. Did you push the changes into
the stable queue repository ?

Thanks,
Guenter

Re: [PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[Greg Kroah-Hartman]

On Fri, Mar 06, 2015 at 08:22:49AM -0800, Guenter Roeck wrote:
> On Thu, Mar 05, 2015 at 10:30:34PM -0800, Greg Kroah-Hartman wrote:
> > On Thu, Mar 05, 2015 at 04:08:44PM +0000, James Hogan wrote:
> > > [ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]
> > > 
> > > Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
> > > modules so that KVM can make use of it when it is built as a module.
> > > 
> > > This fixes the following build error when CONFIG_KVM=m due to commit
> > > f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):
> > > 
> > > ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
> > > 
> > > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > > Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
> > > Cc: Paolo Bonzini <pbonzini@redhat.com>
> > > Cc: Ralf Baechle <ralf@linux-mips.org>
> > > Cc: Paul Burton <paul.burton@imgtec.com>
> > > Cc: Gleb Natapov <gleb@kernel.org>
> > > Cc: kvm@vger.kernel.org
> > > Cc: linux-mips@linux-mips.org
> > > Cc: <stable@vger.kernel.org> # 3.10...3.15
> > > Patchwork: https://patchwork.linux-mips.org/patch/9260/
> > > Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> > > [james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
> > >  so as not to break the Octeon build which excludes FPU support. KVM
> > >  depends on MIPS32r2 anyway.]
> > > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > > ---
> > > Appologies for the previous cavium_octeon_defconfig link breakage.
> > > Octeon has the symbol since 3.16, but not before. This backport should
> > > do the trick for stable 3.10, 3.12, and 3.14. Build tested with
> > > cavium_octeon_defconfig and malta_kvm_defconfig on those stable
> > > branches.
> > > ---
> > >  arch/mips/kernel/mips_ksyms.c | 8 ++++++++
> > >  1 file changed, 8 insertions(+)
> > 
> > Now fixed up, thanks.
> > 
> My auto-builders still fail to build cavium_octeon_defconfig for 3.10 and 3.14,
> and as far as I can see they picked up no changes. Did you push the changes into
> the stable queue repository ?

I didn't push it publically, didn't have access to my 2-factor key so
couldn't do it.  Should be there now, sorry about that.

greg k-h

Re: [PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[Guenter Roeck]

On Fri, Mar 06, 2015 at 09:45:16AM -0800, Greg Kroah-Hartman wrote:
> On Fri, Mar 06, 2015 at 08:22:49AM -0800, Guenter Roeck wrote:
> > On Thu, Mar 05, 2015 at 10:30:34PM -0800, Greg Kroah-Hartman wrote:
> > > On Thu, Mar 05, 2015 at 04:08:44PM +0000, James Hogan wrote:
> > > > [ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]
> > > > 
> > > > Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
> > > > modules so that KVM can make use of it when it is built as a module.
> > > > 
> > > > This fixes the following build error when CONFIG_KVM=m due to commit
> > > > f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):
> > > > 
> > > > ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
> > > > 
> > > > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > > > Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
> > > > Cc: Paolo Bonzini <pbonzini@redhat.com>
> > > > Cc: Ralf Baechle <ralf@linux-mips.org>
> > > > Cc: Paul Burton <paul.burton@imgtec.com>
> > > > Cc: Gleb Natapov <gleb@kernel.org>
> > > > Cc: kvm@vger.kernel.org
> > > > Cc: linux-mips@linux-mips.org
> > > > Cc: <stable@vger.kernel.org> # 3.10...3.15
> > > > Patchwork: https://patchwork.linux-mips.org/patch/9260/
> > > > Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> > > > [james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
> > > >  so as not to break the Octeon build which excludes FPU support. KVM
> > > >  depends on MIPS32r2 anyway.]
> > > > Signed-off-by: James Hogan <james.hogan@imgtec.com>
> > > > ---
> > > > Appologies for the previous cavium_octeon_defconfig link breakage.
> > > > Octeon has the symbol since 3.16, but not before. This backport should
> > > > do the trick for stable 3.10, 3.12, and 3.14. Build tested with
> > > > cavium_octeon_defconfig and malta_kvm_defconfig on those stable
> > > > branches.
> > > > ---
> > > >  arch/mips/kernel/mips_ksyms.c | 8 ++++++++
> > > >  1 file changed, 8 insertions(+)
> > > 
> > > Now fixed up, thanks.
> > > 
> > My auto-builders still fail to build cavium_octeon_defconfig for 3.10 and 3.14,
> > and as far as I can see they picked up no changes. Did you push the changes into
> > the stable queue repository ?
> 
> I didn't push it publically, didn't have access to my 2-factor key so
> couldn't do it.  Should be there now, sorry about that.
> 
Confirmed, all is good now.

Thanks,
Guenter

Re: [PATCH stable 3.10, 3.12, 3.14] MIPS: Export FP functions used by lose_fpu(1) for KVM

[Jiri Slaby]

On 03/05/2015, 05:08 PM, James Hogan wrote:
> [ Upstream commit 3ce465e04bfd8de9956d515d6e9587faac3375dc ]
> 
> Export the _save_fp asm function used by the lose_fpu(1) macro to GPL
> modules so that KVM can make use of it when it is built as a module.
> 
> This fixes the following build error when CONFIG_KVM=m due to commit
> f798217dfd03 ("KVM: MIPS: Don't leak FPU/DSP to guest"):
> 
> ERROR: "_save_fp" [arch/mips/kvm/kvm.ko] undefined!
> 
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> Fixes: f798217dfd03 (KVM: MIPS: Don't leak FPU/DSP to guest)
> Cc: Paolo Bonzini <pbonzini@redhat.com>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Paul Burton <paul.burton@imgtec.com>
> Cc: Gleb Natapov <gleb@kernel.org>
> Cc: kvm@vger.kernel.org
> Cc: linux-mips@linux-mips.org
> Cc: <stable@vger.kernel.org> # 3.10...3.15
> Patchwork: https://patchwork.linux-mips.org/patch/9260/
> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
> [james.hogan@imgtec.com: Only export when CPU_R4K_FPU=y prior to v3.16,
>  so as not to break the Octeon build which excludes FPU support. KVM
>  depends on MIPS32r2 anyway.]
> Signed-off-by: James Hogan <james.hogan@imgtec.com>
> ---
> Appologies for the previous cavium_octeon_defconfig link breakage.
> Octeon has the symbol since 3.16, but not before. This backport should
> do the trick for stable 3.10, 3.12, and 3.14. Build tested with
> cavium_octeon_defconfig and malta_kvm_defconfig on those stable
> branches.

Applied to 3.12 now. Thanks.


-- 
js
suse labs