* [PATCH v2] Split SCSI header files
@ 2015-04-05 18:12 Bart Van Assche
2015-04-06 15:08 ` Christoph Hellwig
0 siblings, 1 reply; 3+ messages in thread
From: Bart Van Assche @ 2015-04-05 18:12 UTC (permalink / raw)
To: James E.J. Bottomley
Cc: Nicholas A. Bellinger, Christoph Hellwig, Hannes Reinecke, linux-scsi
Move the constants that are used by both initiator and target
drivers into the new header file <scsi/scsi_proto.h>. Move the
functions that are used by both subsystems into <scsi/scsi_lib.h>.
Rename drivers/scsi/scsi_lib.c into scsi_ini_lib.c. This change
will allow to modify the SCSI target code such that the initiator
SCSI header files are no longer included. Note: the SCSI target
driver patch is available for review at
https://github.com/bvanassche/linux/commit/092c3cf236ae35a460dead9423fae8f210ee2345.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
---
v2: dropped scsi_lun.h and introduced scsi_lib.h.
drivers/scsi/Makefile | 3 +-
drivers/scsi/scsi.c | 46 -
drivers/scsi/scsi_ini_lib.c | 3145 ++++++++++++++++++++++++++++++++++++
drivers/scsi/scsi_lib.c | 3200 +------------------------------------
drivers/scsi/scsi_scan.c | 62 -
include/scsi/scsi.h | 291 +---
include/scsi/scsi_cmnd.h | 17 -
include/scsi/scsi_device.h | 2 -
include/scsi/scsi_lib.h | 33 +
include/scsi/scsi_proto.h | 299 ++++
include/target/target_core_base.h | 5 +-
11 files changed, 3565 insertions(+), 3538 deletions(-)
create mode 100644 drivers/scsi/scsi_ini_lib.c
create mode 100644 include/scsi/scsi_lib.h
create mode 100644 include/scsi/scsi_proto.h
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index dee160a..ecd2a63 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -160,7 +160,8 @@ obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o \
- scsicam.o scsi_error.o scsi_lib.o
+ scsicam.o scsi_error.o scsi_ini_lib.o \
+ scsi_lib.o
scsi_mod-$(CONFIG_SCSI_CONSTANTS) += constants.o
scsi_mod-$(CONFIG_SCSI_DMA) += scsi_lib_dma.o
scsi_mod-y += scsi_scan.o scsi_sysfs.o scsi_devinfo.o
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index c9c3b57..6322d10 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -98,52 +98,6 @@ EXPORT_SYMBOL(scsi_sd_probe_domain);
ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
EXPORT_SYMBOL(scsi_sd_pm_domain);
-/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
- * You may not alter any existing entry (although adding new ones is
- * encouraged once assigned by ANSI/INCITS T10
- */
-static const char *const scsi_device_types[] = {
- "Direct-Access ",
- "Sequential-Access",
- "Printer ",
- "Processor ",
- "WORM ",
- "CD-ROM ",
- "Scanner ",
- "Optical Device ",
- "Medium Changer ",
- "Communications ",
- "ASC IT8 ",
- "ASC IT8 ",
- "RAID ",
- "Enclosure ",
- "Direct-Access-RBC",
- "Optical card ",
- "Bridge controller",
- "Object storage ",
- "Automation/Drive ",
- "Security Manager ",
- "Direct-Access-ZBC",
-};
-
-/**
- * scsi_device_type - Return 17 char string indicating device type.
- * @type: type number to look up
- */
-
-const char * scsi_device_type(unsigned type)
-{
- if (type == 0x1e)
- return "Well-known LUN ";
- if (type == 0x1f)
- return "No Device ";
- if (type >= ARRAY_SIZE(scsi_device_types))
- return "Unknown ";
- return scsi_device_types[type];
-}
-
-EXPORT_SYMBOL(scsi_device_type);
-
struct scsi_host_cmd_pool {
struct kmem_cache *cmd_slab;
struct kmem_cache *sense_slab;
diff --git a/drivers/scsi/scsi_ini_lib.c b/drivers/scsi/scsi_ini_lib.c
new file mode 100644
index 0000000..889ccc0
--- /dev/null
+++ b/drivers/scsi/scsi_ini_lib.c
@@ -0,0 +1,3145 @@
+/*
+ * Copyright (C) 1999 Eric Youngdale
+ * Copyright (C) 2014 Christoph Hellwig
+ *
+ * SCSI initiator queueing library.
+ * Initial versions: Eric Youngdale (eric@andante.org).
+ * Based upon conversations with large numbers
+ * of people at Linux Expo.
+ */
+
+#include <linux/bio.h>
+#include <linux/bitops.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mempool.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hardirq.h>
+#include <linux/scatterlist.h>
+#include <linux/blk-mq.h>
+#include <linux/ratelimit.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+
+#include <trace/events/scsi.h>
+
+#include "scsi_priv.h"
+#include "scsi_logging.h"
+
+
+#define SG_MEMPOOL_NR ARRAY_SIZE(scsi_sg_pools)
+#define SG_MEMPOOL_SIZE 2
+
+struct scsi_host_sg_pool {
+ size_t size;
+ char *name;
+ struct kmem_cache *slab;
+ mempool_t *pool;
+};
+
+#define SP(x) { .size = x, "sgpool-" __stringify(x) }
+#if (SCSI_MAX_SG_SEGMENTS < 32)
+#error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
+#endif
+static struct scsi_host_sg_pool scsi_sg_pools[] = {
+ SP(8),
+ SP(16),
+#if (SCSI_MAX_SG_SEGMENTS > 32)
+ SP(32),
+#if (SCSI_MAX_SG_SEGMENTS > 64)
+ SP(64),
+#if (SCSI_MAX_SG_SEGMENTS > 128)
+ SP(128),
+#if (SCSI_MAX_SG_SEGMENTS > 256)
+#error SCSI_MAX_SG_SEGMENTS is too large (256 MAX)
+#endif
+#endif
+#endif
+#endif
+ SP(SCSI_MAX_SG_SEGMENTS)
+};
+#undef SP
+
+struct kmem_cache *scsi_sdb_cache;
+
+/*
+ * When to reinvoke queueing after a resource shortage. It's 3 msecs to
+ * not change behaviour from the previous unplug mechanism, experimentation
+ * may prove this needs changing.
+ */
+#define SCSI_QUEUE_DELAY 3
+
+static void
+scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct scsi_device *device = cmd->device;
+ struct scsi_target *starget = scsi_target(device);
+
+ /*
+ * Set the appropriate busy bit for the device/host.
+ *
+ * If the host/device isn't busy, assume that something actually
+ * completed, and that we should be able to queue a command now.
+ *
+ * Note that the prior mid-layer assumption that any host could
+ * always queue at least one command is now broken. The mid-layer
+ * will implement a user specifiable stall (see
+ * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
+ * if a command is requeued with no other commands outstanding
+ * either for the device or for the host.
+ */
+ switch (reason) {
+ case SCSI_MLQUEUE_HOST_BUSY:
+ atomic_set(&host->host_blocked, host->max_host_blocked);
+ break;
+ case SCSI_MLQUEUE_DEVICE_BUSY:
+ case SCSI_MLQUEUE_EH_RETRY:
+ atomic_set(&device->device_blocked,
+ device->max_device_blocked);
+ break;
+ case SCSI_MLQUEUE_TARGET_BUSY:
+ atomic_set(&starget->target_blocked,
+ starget->max_target_blocked);
+ break;
+ }
+}
+
+static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
+{
+ struct scsi_device *sdev = cmd->device;
+ struct request_queue *q = cmd->request->q;
+
+ blk_mq_requeue_request(cmd->request);
+ blk_mq_kick_requeue_list(q);
+ put_device(&sdev->sdev_gendev);
+}
+
+/**
+ * __scsi_queue_insert - private queue insertion
+ * @cmd: The SCSI command being requeued
+ * @reason: The reason for the requeue
+ * @unbusy: Whether the queue should be unbusied
+ *
+ * This is a private queue insertion. The public interface
+ * scsi_queue_insert() always assumes the queue should be unbusied
+ * because it's always called before the completion. This function is
+ * for a requeue after completion, which should only occur in this
+ * file.
+ */
+static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
+{
+ struct scsi_device *device = cmd->device;
+ struct request_queue *q = device->request_queue;
+ unsigned long flags;
+
+ SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd,
+ "Inserting command %p into mlqueue\n", cmd));
+
+ scsi_set_blocked(cmd, reason);
+
+ /*
+ * Decrement the counters, since these commands are no longer
+ * active on the host/device.
+ */
+ if (unbusy)
+ scsi_device_unbusy(device);
+
+ /*
+ * Requeue this command. It will go before all other commands
+ * that are already in the queue. Schedule requeue work under
+ * lock such that the kblockd_schedule_work() call happens
+ * before blk_cleanup_queue() finishes.
+ */
+ cmd->result = 0;
+ if (q->mq_ops) {
+ scsi_mq_requeue_cmd(cmd);
+ return;
+ }
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_requeue_request(q, cmd->request);
+ kblockd_schedule_work(&device->requeue_work);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
+
+/*
+ * Function: scsi_queue_insert()
+ *
+ * Purpose: Insert a command in the midlevel queue.
+ *
+ * Arguments: cmd - command that we are adding to queue.
+ * reason - why we are inserting command to queue.
+ *
+ * Lock status: Assumed that lock is not held upon entry.
+ *
+ * Returns: Nothing.
+ *
+ * Notes: We do this for one of two cases. Either the host is busy
+ * and it cannot accept any more commands for the time being,
+ * or the device returned QUEUE_FULL and can accept no more
+ * commands.
+ * Notes: This could be called either from an interrupt context or a
+ * normal process context.
+ */
+void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
+{
+ __scsi_queue_insert(cmd, reason, 1);
+}
+/**
+ * scsi_execute - insert request and wait for the result
+ * @sdev: scsi device
+ * @cmd: scsi command
+ * @data_direction: data direction
+ * @buffer: data buffer
+ * @bufflen: len of buffer
+ * @sense: optional sense buffer
+ * @timeout: request timeout in seconds
+ * @retries: number of times to retry request
+ * @flags: or into request flags;
+ * @resid: optional residual length
+ *
+ * returns the req->errors value which is the scsi_cmnd result
+ * field.
+ */
+int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
+ int data_direction, void *buffer, unsigned bufflen,
+ unsigned char *sense, int timeout, int retries, u64 flags,
+ int *resid)
+{
+ struct request *req;
+ int write = (data_direction == DMA_TO_DEVICE);
+ int ret = DRIVER_ERROR << 24;
+
+ req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
+ if (IS_ERR(req))
+ return ret;
+ blk_rq_set_block_pc(req);
+
+ if (bufflen && blk_rq_map_kern(sdev->request_queue, req,
+ buffer, bufflen, __GFP_WAIT))
+ goto out;
+
+ req->cmd_len = COMMAND_SIZE(cmd[0]);
+ memcpy(req->cmd, cmd, req->cmd_len);
+ req->sense = sense;
+ req->sense_len = 0;
+ req->retries = retries;
+ req->timeout = timeout;
+ req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT;
+
+ /*
+ * head injection *required* here otherwise quiesce won't work
+ */
+ blk_execute_rq(req->q, NULL, req, 1);
+
+ /*
+ * Some devices (USB mass-storage in particular) may transfer
+ * garbage data together with a residue indicating that the data
+ * is invalid. Prevent the garbage from being misinterpreted
+ * and prevent security leaks by zeroing out the excess data.
+ */
+ if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
+ memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
+
+ if (resid)
+ *resid = req->resid_len;
+ ret = req->errors;
+ out:
+ blk_put_request(req);
+
+ return ret;
+}
+EXPORT_SYMBOL(scsi_execute);
+
+int scsi_execute_req_flags(struct scsi_device *sdev, const unsigned char *cmd,
+ int data_direction, void *buffer, unsigned bufflen,
+ struct scsi_sense_hdr *sshdr, int timeout, int retries,
+ int *resid, u64 flags)
+{
+ char *sense = NULL;
+ int result;
+
+ if (sshdr) {
+ sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
+ if (!sense)
+ return DRIVER_ERROR << 24;
+ }
+ result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen,
+ sense, timeout, retries, flags, resid);
+ if (sshdr)
+ scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr);
+
+ kfree(sense);
+ return result;
+}
+EXPORT_SYMBOL(scsi_execute_req_flags);
+
+/*
+ * Function: scsi_init_cmd_errh()
+ *
+ * Purpose: Initialize cmd fields related to error handling.
+ *
+ * Arguments: cmd - command that is ready to be queued.
+ *
+ * Notes: This function has the job of initializing a number of
+ * fields related to error handling. Typically this will
+ * be called once for each command, as required.
+ */
+static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
+{
+ cmd->serial_number = 0;
+ scsi_set_resid(cmd, 0);
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
+ if (cmd->cmd_len == 0)
+ cmd->cmd_len = scsi_command_size(cmd->cmnd);
+}
+
+void scsi_device_unbusy(struct scsi_device *sdev)
+{
+ struct Scsi_Host *shost = sdev->host;
+ struct scsi_target *starget = scsi_target(sdev);
+ unsigned long flags;
+
+ atomic_dec(&shost->host_busy);
+ if (starget->can_queue > 0)
+ atomic_dec(&starget->target_busy);
+
+ if (unlikely(scsi_host_in_recovery(shost) &&
+ (shost->host_failed || shost->host_eh_scheduled))) {
+ spin_lock_irqsave(shost->host_lock, flags);
+ scsi_eh_wakeup(shost);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ }
+
+ atomic_dec(&sdev->device_busy);
+}
+
+static void scsi_kick_queue(struct request_queue *q)
+{
+ if (q->mq_ops)
+ blk_mq_start_hw_queues(q);
+ else
+ blk_run_queue(q);
+}
+
+/*
+ * Called for single_lun devices on IO completion. Clear starget_sdev_user,
+ * and call blk_run_queue for all the scsi_devices on the target -
+ * including current_sdev first.
+ *
+ * Called with *no* scsi locks held.
+ */
+static void scsi_single_lun_run(struct scsi_device *current_sdev)
+{
+ struct Scsi_Host *shost = current_sdev->host;
+ struct scsi_device *sdev, *tmp;
+ struct scsi_target *starget = scsi_target(current_sdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ starget->starget_sdev_user = NULL;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ /*
+ * Call blk_run_queue for all LUNs on the target, starting with
+ * current_sdev. We race with others (to set starget_sdev_user),
+ * but in most cases, we will be first. Ideally, each LU on the
+ * target would get some limited time or requests on the target.
+ */
+ scsi_kick_queue(current_sdev->request_queue);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ if (starget->starget_sdev_user)
+ goto out;
+ list_for_each_entry_safe(sdev, tmp, &starget->devices,
+ same_target_siblings) {
+ if (sdev == current_sdev)
+ continue;
+ if (scsi_device_get(sdev))
+ continue;
+
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ scsi_kick_queue(sdev->request_queue);
+ spin_lock_irqsave(shost->host_lock, flags);
+
+ scsi_device_put(sdev);
+ }
+ out:
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+
+static inline bool scsi_device_is_busy(struct scsi_device *sdev)
+{
+ if (atomic_read(&sdev->device_busy) >= sdev->queue_depth)
+ return true;
+ if (atomic_read(&sdev->device_blocked) > 0)
+ return true;
+ return false;
+}
+
+static inline bool scsi_target_is_busy(struct scsi_target *starget)
+{
+ if (starget->can_queue > 0) {
+ if (atomic_read(&starget->target_busy) >= starget->can_queue)
+ return true;
+ if (atomic_read(&starget->target_blocked) > 0)
+ return true;
+ }
+ return false;
+}
+
+static inline bool scsi_host_is_busy(struct Scsi_Host *shost)
+{
+ if (shost->can_queue > 0 &&
+ atomic_read(&shost->host_busy) >= shost->can_queue)
+ return true;
+ if (atomic_read(&shost->host_blocked) > 0)
+ return true;
+ if (shost->host_self_blocked)
+ return true;
+ return false;
+}
+
+static void scsi_starved_list_run(struct Scsi_Host *shost)
+{
+ LIST_HEAD(starved_list);
+ struct scsi_device *sdev;
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_splice_init(&shost->starved_list, &starved_list);
+
+ while (!list_empty(&starved_list)) {
+ struct request_queue *slq;
+
+ /*
+ * As long as shost is accepting commands and we have
+ * starved queues, call blk_run_queue. scsi_request_fn
+ * drops the queue_lock and can add us back to the
+ * starved_list.
+ *
+ * host_lock protects the starved_list and starved_entry.
+ * scsi_request_fn must get the host_lock before checking
+ * or modifying starved_list or starved_entry.
+ */
+ if (scsi_host_is_busy(shost))
+ break;
+
+ sdev = list_entry(starved_list.next,
+ struct scsi_device, starved_entry);
+ list_del_init(&sdev->starved_entry);
+ if (scsi_target_is_busy(scsi_target(sdev))) {
+ list_move_tail(&sdev->starved_entry,
+ &shost->starved_list);
+ continue;
+ }
+
+ /*
+ * Once we drop the host lock, a racing scsi_remove_device()
+ * call may remove the sdev from the starved list and destroy
+ * it and the queue. Mitigate by taking a reference to the
+ * queue and never touching the sdev again after we drop the
+ * host lock. Note: if __scsi_remove_device() invokes
+ * blk_cleanup_queue() before the queue is run from this
+ * function then blk_run_queue() will return immediately since
+ * blk_cleanup_queue() marks the queue with QUEUE_FLAG_DYING.
+ */
+ slq = sdev->request_queue;
+ if (!blk_get_queue(slq))
+ continue;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ scsi_kick_queue(slq);
+ blk_put_queue(slq);
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ /* put any unprocessed entries back */
+ list_splice(&starved_list, &shost->starved_list);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+
+/*
+ * Function: scsi_run_queue()
+ *
+ * Purpose: Select a proper request queue to serve next
+ *
+ * Arguments: q - last request's queue
+ *
+ * Returns: Nothing
+ *
+ * Notes: The previous command was completely finished, start
+ * a new one if possible.
+ */
+static void scsi_run_queue(struct request_queue *q)
+{
+ struct scsi_device *sdev = q->queuedata;
+
+ if (scsi_target(sdev)->single_lun)
+ scsi_single_lun_run(sdev);
+ if (!list_empty(&sdev->host->starved_list))
+ scsi_starved_list_run(sdev->host);
+
+ if (q->mq_ops)
+ blk_mq_start_stopped_hw_queues(q, false);
+ else
+ blk_run_queue(q);
+}
+
+void scsi_requeue_run_queue(struct work_struct *work)
+{
+ struct scsi_device *sdev;
+ struct request_queue *q;
+
+ sdev = container_of(work, struct scsi_device, requeue_work);
+ q = sdev->request_queue;
+ scsi_run_queue(q);
+}
+
+/*
+ * Function: scsi_requeue_command()
+ *
+ * Purpose: Handle post-processing of completed commands.
+ *
+ * Arguments: q - queue to operate on
+ * cmd - command that may need to be requeued.
+ *
+ * Returns: Nothing
+ *
+ * Notes: After command completion, there may be blocks left
+ * over which weren't finished by the previous command
+ * this can be for a number of reasons - the main one is
+ * I/O errors in the middle of the request, in which case
+ * we need to request the blocks that come after the bad
+ * sector.
+ * Notes: Upon return, cmd is a stale pointer.
+ */
+static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
+{
+ struct scsi_device *sdev = cmd->device;
+ struct request *req = cmd->request;
+ unsigned long flags;
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_unprep_request(req);
+ req->special = NULL;
+ scsi_put_command(cmd);
+ blk_requeue_request(q, req);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ scsi_run_queue(q);
+
+ put_device(&sdev->sdev_gendev);
+}
+
+void scsi_run_host_queues(struct Scsi_Host *shost)
+{
+ struct scsi_device *sdev;
+
+ shost_for_each_device(sdev, shost)
+ scsi_run_queue(sdev->request_queue);
+}
+
+static inline unsigned int scsi_sgtable_index(unsigned short nents)
+{
+ unsigned int index;
+
+ BUG_ON(nents > SCSI_MAX_SG_SEGMENTS);
+
+ if (nents <= 8)
+ index = 0;
+ else
+ index = get_count_order(nents) - 3;
+
+ return index;
+}
+
+static void scsi_sg_free(struct scatterlist *sgl, unsigned int nents)
+{
+ struct scsi_host_sg_pool *sgp;
+
+ sgp = scsi_sg_pools + scsi_sgtable_index(nents);
+ mempool_free(sgl, sgp->pool);
+}
+
+static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
+{
+ struct scsi_host_sg_pool *sgp;
+
+ sgp = scsi_sg_pools + scsi_sgtable_index(nents);
+ return mempool_alloc(sgp->pool, gfp_mask);
+}
+
+static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq)
+{
+ if (mq && sdb->table.nents <= SCSI_MAX_SG_SEGMENTS)
+ return;
+ __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
+}
+
+static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
+{
+ struct scatterlist *first_chunk = NULL;
+ int ret;
+
+ BUG_ON(!nents);
+
+ if (mq) {
+ if (nents <= SCSI_MAX_SG_SEGMENTS) {
+ sdb->table.nents = nents;
+ sg_init_table(sdb->table.sgl, sdb->table.nents);
+ return 0;
+ }
+ first_chunk = sdb->table.sgl;
+ }
+
+ ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS,
+ first_chunk, GFP_ATOMIC, scsi_sg_alloc);
+ if (unlikely(ret))
+ scsi_free_sgtable(sdb, mq);
+ return ret;
+}
+
+static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
+{
+ if (cmd->request->cmd_type == REQ_TYPE_FS) {
+ struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
+
+ if (drv->uninit_command)
+ drv->uninit_command(cmd);
+ }
+}
+
+static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
+{
+ if (cmd->sdb.table.nents)
+ scsi_free_sgtable(&cmd->sdb, true);
+ if (cmd->request->next_rq && cmd->request->next_rq->special)
+ scsi_free_sgtable(cmd->request->next_rq->special, true);
+ if (scsi_prot_sg_count(cmd))
+ scsi_free_sgtable(cmd->prot_sdb, true);
+}
+
+static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
+{
+ struct scsi_device *sdev = cmd->device;
+ struct Scsi_Host *shost = sdev->host;
+ unsigned long flags;
+
+ scsi_mq_free_sgtables(cmd);
+ scsi_uninit_cmd(cmd);
+
+ if (shost->use_cmd_list) {
+ BUG_ON(list_empty(&cmd->list));
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_del_init(&cmd->list);
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+ }
+}
+
+/*
+ * Function: scsi_release_buffers()
+ *
+ * Purpose: Free resources allocate for a scsi_command.
+ *
+ * Arguments: cmd - command that we are bailing.
+ *
+ * Lock status: Assumed that no lock is held upon entry.
+ *
+ * Returns: Nothing
+ *
+ * Notes: In the event that an upper level driver rejects a
+ * command, we must release resources allocated during
+ * the __init_io() function. Primarily this would involve
+ * the scatter-gather table.
+ */
+static void scsi_release_buffers(struct scsi_cmnd *cmd)
+{
+ if (cmd->sdb.table.nents)
+ scsi_free_sgtable(&cmd->sdb, false);
+
+ memset(&cmd->sdb, 0, sizeof(cmd->sdb));
+
+ if (scsi_prot_sg_count(cmd))
+ scsi_free_sgtable(cmd->prot_sdb, false);
+}
+
+static void scsi_release_bidi_buffers(struct scsi_cmnd *cmd)
+{
+ struct scsi_data_buffer *bidi_sdb = cmd->request->next_rq->special;
+
+ scsi_free_sgtable(bidi_sdb, false);
+ kmem_cache_free(scsi_sdb_cache, bidi_sdb);
+ cmd->request->next_rq->special = NULL;
+}
+
+static bool scsi_end_request(struct request *req, int error,
+ unsigned int bytes, unsigned int bidi_bytes)
+{
+ struct scsi_cmnd *cmd = req->special;
+ struct scsi_device *sdev = cmd->device;
+ struct request_queue *q = sdev->request_queue;
+
+ if (blk_update_request(req, error, bytes))
+ return true;
+
+ /* Bidi request must be completed as a whole */
+ if (unlikely(bidi_bytes) &&
+ blk_update_request(req->next_rq, error, bidi_bytes))
+ return true;
+
+ if (blk_queue_add_random(q))
+ add_disk_randomness(req->rq_disk);
+
+ if (req->mq_ctx) {
+ /*
+ * In the MQ case the command gets freed by __blk_mq_end_request,
+ * so we have to do all cleanup that depends on it earlier.
+ *
+ * We also can't kick the queues from irq context, so we
+ * will have to defer it to a workqueue.
+ */
+ scsi_mq_uninit_cmd(cmd);
+
+ __blk_mq_end_request(req, error);
+
+ if (scsi_target(sdev)->single_lun ||
+ !list_empty(&sdev->host->starved_list))
+ kblockd_schedule_work(&sdev->requeue_work);
+ else
+ blk_mq_start_stopped_hw_queues(q, true);
+ } else {
+ unsigned long flags;
+
+ if (bidi_bytes)
+ scsi_release_bidi_buffers(cmd);
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_finish_request(req, error);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ scsi_release_buffers(cmd);
+
+ scsi_put_command(cmd);
+ scsi_run_queue(q);
+ }
+
+ put_device(&sdev->sdev_gendev);
+ return false;
+}
+
+/**
+ * __scsi_error_from_host_byte - translate SCSI error code into errno
+ * @cmd: SCSI command (unused)
+ * @result: scsi error code
+ *
+ * Translate SCSI error code into standard UNIX errno.
+ * Return values:
+ * -ENOLINK temporary transport failure
+ * -EREMOTEIO permanent target failure, do not retry
+ * -EBADE permanent nexus failure, retry on other path
+ * -ENOSPC No write space available
+ * -ENODATA Medium error
+ * -EIO unspecified I/O error
+ */
+static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
+{
+ int error = 0;
+
+ switch(host_byte(result)) {
+ case DID_TRANSPORT_FAILFAST:
+ error = -ENOLINK;
+ break;
+ case DID_TARGET_FAILURE:
+ set_host_byte(cmd, DID_OK);
+ error = -EREMOTEIO;
+ break;
+ case DID_NEXUS_FAILURE:
+ set_host_byte(cmd, DID_OK);
+ error = -EBADE;
+ break;
+ case DID_ALLOC_FAILURE:
+ set_host_byte(cmd, DID_OK);
+ error = -ENOSPC;
+ break;
+ case DID_MEDIUM_ERROR:
+ set_host_byte(cmd, DID_OK);
+ error = -ENODATA;
+ break;
+ default:
+ error = -EIO;
+ break;
+ }
+
+ return error;
+}
+
+/*
+ * Function: scsi_io_completion()
+ *
+ * Purpose: Completion processing for block device I/O requests.
+ *
+ * Arguments: cmd - command that is finished.
+ *
+ * Lock status: Assumed that no lock is held upon entry.
+ *
+ * Returns: Nothing
+ *
+ * Notes: We will finish off the specified number of sectors. If we
+ * are done, the command block will be released and the queue
+ * function will be goosed. If we are not done then we have to
+ * figure out what to do next:
+ *
+ * a) We can call scsi_requeue_command(). The request
+ * will be unprepared and put back on the queue. Then
+ * a new command will be created for it. This should
+ * be used if we made forward progress, or if we want
+ * to switch from READ(10) to READ(6) for example.
+ *
+ * b) We can call __scsi_queue_insert(). The request will
+ * be put back on the queue and retried using the same
+ * command as before, possibly after a delay.
+ *
+ * c) We can call scsi_end_request() with -EIO to fail
+ * the remainder of the request.
+ */
+void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
+{
+ int result = cmd->result;
+ struct request_queue *q = cmd->device->request_queue;
+ struct request *req = cmd->request;
+ int error = 0;
+ struct scsi_sense_hdr sshdr;
+ bool sense_valid = false;
+ int sense_deferred = 0, level = 0;
+ enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
+ ACTION_DELAYED_RETRY} action;
+ unsigned long wait_for = (cmd->allowed + 1) * req->timeout;
+
+ if (result) {
+ sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
+ if (sense_valid)
+ sense_deferred = scsi_sense_is_deferred(&sshdr);
+ }
+
+ if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
+ if (result) {
+ if (sense_valid && req->sense) {
+ /*
+ * SG_IO wants current and deferred errors
+ */
+ int len = 8 + cmd->sense_buffer[7];
+
+ if (len > SCSI_SENSE_BUFFERSIZE)
+ len = SCSI_SENSE_BUFFERSIZE;
+ memcpy(req->sense, cmd->sense_buffer, len);
+ req->sense_len = len;
+ }
+ if (!sense_deferred)
+ error = __scsi_error_from_host_byte(cmd, result);
+ }
+ /*
+ * __scsi_error_from_host_byte may have reset the host_byte
+ */
+ req->errors = cmd->result;
+
+ req->resid_len = scsi_get_resid(cmd);
+
+ if (scsi_bidi_cmnd(cmd)) {
+ /*
+ * Bidi commands Must be complete as a whole,
+ * both sides at once.
+ */
+ req->next_rq->resid_len = scsi_in(cmd)->resid;
+ if (scsi_end_request(req, 0, blk_rq_bytes(req),
+ blk_rq_bytes(req->next_rq)))
+ BUG();
+ return;
+ }
+ } else if (blk_rq_bytes(req) == 0 && result && !sense_deferred) {
+ /*
+ * Certain non BLOCK_PC requests are commands that don't
+ * actually transfer anything (FLUSH), so cannot use
+ * good_bytes != blk_rq_bytes(req) as the signal for an error.
+ * This sets the error explicitly for the problem case.
+ */
+ error = __scsi_error_from_host_byte(cmd, result);
+ }
+
+ /* no bidi support for !REQ_TYPE_BLOCK_PC yet */
+ BUG_ON(blk_bidi_rq(req));
+
+ /*
+ * Next deal with any sectors which we were able to correctly
+ * handle.
+ */
+ SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, cmd,
+ "%u sectors total, %d bytes done.\n",
+ blk_rq_sectors(req), good_bytes));
+
+ /*
+ * Recovered errors need reporting, but they're always treated
+ * as success, so fiddle the result code here. For BLOCK_PC
+ * we already took a copy of the original into rq->errors which
+ * is what gets returned to the user
+ */
+ if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) {
+ /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip
+ * print since caller wants ATA registers. Only occurs on
+ * SCSI ATA PASS_THROUGH commands when CK_COND=1
+ */
+ if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
+ ;
+ else if (!(req->cmd_flags & REQ_QUIET))
+ scsi_print_sense(cmd);
+ result = 0;
+ /* BLOCK_PC may have set error */
+ error = 0;
+ }
+
+ /*
+ * If we finished all bytes in the request we are done now.
+ */
+ if (!scsi_end_request(req, error, good_bytes, 0))
+ return;
+
+ /*
+ * Kill remainder if no retrys.
+ */
+ if (error && scsi_noretry_cmd(cmd)) {
+ if (scsi_end_request(req, error, blk_rq_bytes(req), 0))
+ BUG();
+ return;
+ }
+
+ /*
+ * If there had been no error, but we have leftover bytes in the
+ * requeues just queue the command up again.
+ */
+ if (result == 0)
+ goto requeue;
+
+ error = __scsi_error_from_host_byte(cmd, result);
+
+ if (host_byte(result) == DID_RESET) {
+ /* Third party bus reset or reset for error recovery
+ * reasons. Just retry the command and see what
+ * happens.
+ */
+ action = ACTION_RETRY;
+ } else if (sense_valid && !sense_deferred) {
+ switch (sshdr.sense_key) {
+ case UNIT_ATTENTION:
+ if (cmd->device->removable) {
+ /* Detected disc change. Set a bit
+ * and quietly refuse further access.
+ */
+ cmd->device->changed = 1;
+ action = ACTION_FAIL;
+ } else {
+ /* Must have been a power glitch, or a
+ * bus reset. Could not have been a
+ * media change, so we just retry the
+ * command and see what happens.
+ */
+ action = ACTION_RETRY;
+ }
+ break;
+ case ILLEGAL_REQUEST:
+ /* If we had an ILLEGAL REQUEST returned, then
+ * we may have performed an unsupported
+ * command. The only thing this should be
+ * would be a ten byte read where only a six
+ * byte read was supported. Also, on a system
+ * where READ CAPACITY failed, we may have
+ * read past the end of the disk.
+ */
+ if ((cmd->device->use_10_for_rw &&
+ sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
+ (cmd->cmnd[0] == READ_10 ||
+ cmd->cmnd[0] == WRITE_10)) {
+ /* This will issue a new 6-byte command. */
+ cmd->device->use_10_for_rw = 0;
+ action = ACTION_REPREP;
+ } else if (sshdr.asc == 0x10) /* DIX */ {
+ action = ACTION_FAIL;
+ error = -EILSEQ;
+ /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
+ } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
+ action = ACTION_FAIL;
+ error = -EREMOTEIO;
+ } else
+ action = ACTION_FAIL;
+ break;
+ case ABORTED_COMMAND:
+ action = ACTION_FAIL;
+ if (sshdr.asc == 0x10) /* DIF */
+ error = -EILSEQ;
+ break;
+ case NOT_READY:
+ /* If the device is in the process of becoming
+ * ready, or has a temporary blockage, retry.
+ */
+ if (sshdr.asc == 0x04) {
+ switch (sshdr.ascq) {
+ case 0x01: /* becoming ready */
+ case 0x04: /* format in progress */
+ case 0x05: /* rebuild in progress */
+ case 0x06: /* recalculation in progress */
+ case 0x07: /* operation in progress */
+ case 0x08: /* Long write in progress */
+ case 0x09: /* self test in progress */
+ case 0x14: /* space allocation in progress */
+ action = ACTION_DELAYED_RETRY;
+ break;
+ default:
+ action = ACTION_FAIL;
+ break;
+ }
+ } else
+ action = ACTION_FAIL;
+ break;
+ case VOLUME_OVERFLOW:
+ /* See SSC3rXX or current. */
+ action = ACTION_FAIL;
+ break;
+ default:
+ action = ACTION_FAIL;
+ break;
+ }
+ } else
+ action = ACTION_FAIL;
+
+ if (action != ACTION_FAIL &&
+ time_before(cmd->jiffies_at_alloc + wait_for, jiffies))
+ action = ACTION_FAIL;
+
+ switch (action) {
+ case ACTION_FAIL:
+ /* Give up and fail the remainder of the request */
+ if (!(req->cmd_flags & REQ_QUIET)) {
+ static DEFINE_RATELIMIT_STATE(_rs,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
+ if (unlikely(scsi_logging_level))
+ level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
+ SCSI_LOG_MLCOMPLETE_BITS);
+
+ /*
+ * if logging is enabled the failure will be printed
+ * in scsi_log_completion(), so avoid duplicate messages
+ */
+ if (!level && __ratelimit(&_rs)) {
+ scsi_print_result(cmd, NULL, FAILED);
+ if (driver_byte(result) & DRIVER_SENSE)
+ scsi_print_sense(cmd);
+ scsi_print_command(cmd);
+ }
+ }
+ if (!scsi_end_request(req, error, blk_rq_err_bytes(req), 0))
+ return;
+ /*FALLTHRU*/
+ case ACTION_REPREP:
+ requeue:
+ /* Unprep the request and put it back at the head of the queue.
+ * A new command will be prepared and issued.
+ */
+ if (q->mq_ops) {
+ cmd->request->cmd_flags &= ~REQ_DONTPREP;
+ scsi_mq_uninit_cmd(cmd);
+ scsi_mq_requeue_cmd(cmd);
+ } else {
+ scsi_release_buffers(cmd);
+ scsi_requeue_command(q, cmd);
+ }
+ break;
+ case ACTION_RETRY:
+ /* Retry the same command immediately */
+ __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, 0);
+ break;
+ case ACTION_DELAYED_RETRY:
+ /* Retry the same command after a delay */
+ __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0);
+ break;
+ }
+}
+
+static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
+{
+ int count;
+
+ /*
+ * If sg table allocation fails, requeue request later.
+ */
+ if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments,
+ req->mq_ctx != NULL)))
+ return BLKPREP_DEFER;
+
+ /*
+ * Next, walk the list, and fill in the addresses and sizes of
+ * each segment.
+ */
+ count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
+ BUG_ON(count > sdb->table.nents);
+ sdb->table.nents = count;
+ sdb->length = blk_rq_bytes(req);
+ return BLKPREP_OK;
+}
+
+/*
+ * Function: scsi_init_io()
+ *
+ * Purpose: SCSI I/O initialize function.
+ *
+ * Arguments: cmd - Command descriptor we wish to initialize
+ *
+ * Returns: 0 on success
+ * BLKPREP_DEFER if the failure is retryable
+ * BLKPREP_KILL if the failure is fatal
+ */
+int scsi_init_io(struct scsi_cmnd *cmd)
+{
+ struct scsi_device *sdev = cmd->device;
+ struct request *rq = cmd->request;
+ bool is_mq = (rq->mq_ctx != NULL);
+ int error;
+
+ BUG_ON(!rq->nr_phys_segments);
+
+ error = scsi_init_sgtable(rq, &cmd->sdb);
+ if (error)
+ goto err_exit;
+
+ if (blk_bidi_rq(rq)) {
+ if (!rq->q->mq_ops) {
+ struct scsi_data_buffer *bidi_sdb =
+ kmem_cache_zalloc(scsi_sdb_cache, GFP_ATOMIC);
+ if (!bidi_sdb) {
+ error = BLKPREP_DEFER;
+ goto err_exit;
+ }
+
+ rq->next_rq->special = bidi_sdb;
+ }
+
+ error = scsi_init_sgtable(rq->next_rq, rq->next_rq->special);
+ if (error)
+ goto err_exit;
+ }
+
+ if (blk_integrity_rq(rq)) {
+ struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
+ int ivecs, count;
+
+ if (prot_sdb == NULL) {
+ /*
+ * This can happen if someone (e.g. multipath)
+ * queues a command to a device on an adapter
+ * that does not support DIX.
+ */
+ WARN_ON_ONCE(1);
+ error = BLKPREP_KILL;
+ goto err_exit;
+ }
+
+ ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
+
+ if (scsi_alloc_sgtable(prot_sdb, ivecs, is_mq)) {
+ error = BLKPREP_DEFER;
+ goto err_exit;
+ }
+
+ count = blk_rq_map_integrity_sg(rq->q, rq->bio,
+ prot_sdb->table.sgl);
+ BUG_ON(unlikely(count > ivecs));
+ BUG_ON(unlikely(count > queue_max_integrity_segments(rq->q)));
+
+ cmd->prot_sdb = prot_sdb;
+ cmd->prot_sdb->table.nents = count;
+ }
+
+ return BLKPREP_OK;
+err_exit:
+ if (is_mq) {
+ scsi_mq_free_sgtables(cmd);
+ } else {
+ scsi_release_buffers(cmd);
+ cmd->request->special = NULL;
+ scsi_put_command(cmd);
+ put_device(&sdev->sdev_gendev);
+ }
+ return error;
+}
+EXPORT_SYMBOL(scsi_init_io);
+
+static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
+ struct request *req)
+{
+ struct scsi_cmnd *cmd;
+
+ if (!req->special) {
+ /* Bail if we can't get a reference to the device */
+ if (!get_device(&sdev->sdev_gendev))
+ return NULL;
+
+ cmd = scsi_get_command(sdev, GFP_ATOMIC);
+ if (unlikely(!cmd)) {
+ put_device(&sdev->sdev_gendev);
+ return NULL;
+ }
+ req->special = cmd;
+ } else {
+ cmd = req->special;
+ }
+
+ /* pull a tag out of the request if we have one */
+ cmd->tag = req->tag;
+ cmd->request = req;
+
+ cmd->cmnd = req->cmd;
+ cmd->prot_op = SCSI_PROT_NORMAL;
+
+ return cmd;
+}
+
+static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
+{
+ struct scsi_cmnd *cmd = req->special;
+
+ /*
+ * BLOCK_PC requests may transfer data, in which case they must
+ * a bio attached to them. Or they might contain a SCSI command
+ * that does not transfer data, in which case they may optionally
+ * submit a request without an attached bio.
+ */
+ if (req->bio) {
+ int ret = scsi_init_io(cmd);
+ if (unlikely(ret))
+ return ret;
+ } else {
+ BUG_ON(blk_rq_bytes(req));
+
+ memset(&cmd->sdb, 0, sizeof(cmd->sdb));
+ }
+
+ cmd->cmd_len = req->cmd_len;
+ cmd->transfersize = blk_rq_bytes(req);
+ cmd->allowed = req->retries;
+ return BLKPREP_OK;
+}
+
+/*
+ * Setup a REQ_TYPE_FS command. These are simple request from filesystems
+ * that still need to be translated to SCSI CDBs from the ULD.
+ */
+static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
+{
+ struct scsi_cmnd *cmd = req->special;
+
+ if (unlikely(sdev->scsi_dh_data && sdev->scsi_dh_data->scsi_dh
+ && sdev->scsi_dh_data->scsi_dh->prep_fn)) {
+ int ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req);
+ if (ret != BLKPREP_OK)
+ return ret;
+ }
+
+ memset(cmd->cmnd, 0, BLK_MAX_CDB);
+ return scsi_cmd_to_driver(cmd)->init_command(cmd);
+}
+
+static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req)
+{
+ struct scsi_cmnd *cmd = req->special;
+
+ if (!blk_rq_bytes(req))
+ cmd->sc_data_direction = DMA_NONE;
+ else if (rq_data_dir(req) == WRITE)
+ cmd->sc_data_direction = DMA_TO_DEVICE;
+ else
+ cmd->sc_data_direction = DMA_FROM_DEVICE;
+
+ switch (req->cmd_type) {
+ case REQ_TYPE_FS:
+ return scsi_setup_fs_cmnd(sdev, req);
+ case REQ_TYPE_BLOCK_PC:
+ return scsi_setup_blk_pc_cmnd(sdev, req);
+ default:
+ return BLKPREP_KILL;
+ }
+}
+
+static int
+scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
+{
+ int ret = BLKPREP_OK;
+
+ /*
+ * If the device is not in running state we will reject some
+ * or all commands.
+ */
+ if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
+ switch (sdev->sdev_state) {
+ case SDEV_OFFLINE:
+ case SDEV_TRANSPORT_OFFLINE:
+ /*
+ * If the device is offline we refuse to process any
+ * commands. The device must be brought online
+ * before trying any recovery commands.
+ */
+ sdev_printk(KERN_ERR, sdev,
+ "rejecting I/O to offline device\n");
+ ret = BLKPREP_KILL;
+ break;
+ case SDEV_DEL:
+ /*
+ * If the device is fully deleted, we refuse to
+ * process any commands as well.
+ */
+ sdev_printk(KERN_ERR, sdev,
+ "rejecting I/O to dead device\n");
+ ret = BLKPREP_KILL;
+ break;
+ case SDEV_QUIESCE:
+ case SDEV_BLOCK:
+ case SDEV_CREATED_BLOCK:
+ /*
+ * If the devices is blocked we defer normal commands.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_DEFER;
+ break;
+ default:
+ /*
+ * For any other not fully online state we only allow
+ * special commands. In particular any user initiated
+ * command is not allowed.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_KILL;
+ break;
+ }
+ }
+ return ret;
+}
+
+static int
+scsi_prep_return(struct request_queue *q, struct request *req, int ret)
+{
+ struct scsi_device *sdev = q->queuedata;
+
+ switch (ret) {
+ case BLKPREP_KILL:
+ req->errors = DID_NO_CONNECT << 16;
+ /* release the command and kill it */
+ if (req->special) {
+ struct scsi_cmnd *cmd = req->special;
+ scsi_release_buffers(cmd);
+ scsi_put_command(cmd);
+ put_device(&sdev->sdev_gendev);
+ req->special = NULL;
+ }
+ break;
+ case BLKPREP_DEFER:
+ /*
+ * If we defer, the blk_peek_request() returns NULL, but the
+ * queue must be restarted, so we schedule a callback to happen
+ * shortly.
+ */
+ if (atomic_read(&sdev->device_busy) == 0)
+ blk_delay_queue(q, SCSI_QUEUE_DELAY);
+ break;
+ default:
+ req->cmd_flags |= REQ_DONTPREP;
+ }
+
+ return ret;
+}
+
+static int scsi_prep_fn(struct request_queue *q, struct request *req)
+{
+ struct scsi_device *sdev = q->queuedata;
+ struct scsi_cmnd *cmd;
+ int ret;
+
+ ret = scsi_prep_state_check(sdev, req);
+ if (ret != BLKPREP_OK)
+ goto out;
+
+ cmd = scsi_get_cmd_from_req(sdev, req);
+ if (unlikely(!cmd)) {
+ ret = BLKPREP_DEFER;
+ goto out;
+ }
+
+ ret = scsi_setup_cmnd(sdev, req);
+out:
+ return scsi_prep_return(q, req, ret);
+}
+
+static void scsi_unprep_fn(struct request_queue *q, struct request *req)
+{
+ scsi_uninit_cmd(req->special);
+}
+
+/*
+ * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
+ * return 0.
+ *
+ * Called with the queue_lock held.
+ */
+static inline int scsi_dev_queue_ready(struct request_queue *q,
+ struct scsi_device *sdev)
+{
+ unsigned int busy;
+
+ busy = atomic_inc_return(&sdev->device_busy) - 1;
+ if (atomic_read(&sdev->device_blocked)) {
+ if (busy)
+ goto out_dec;
+
+ /*
+ * unblock after device_blocked iterates to zero
+ */
+ if (atomic_dec_return(&sdev->device_blocked) > 0) {
+ /*
+ * For the MQ case we take care of this in the caller.
+ */
+ if (!q->mq_ops)
+ blk_delay_queue(q, SCSI_QUEUE_DELAY);
+ goto out_dec;
+ }
+ SCSI_LOG_MLQUEUE(3, sdev_printk(KERN_INFO, sdev,
+ "unblocking device at zero depth\n"));
+ }
+
+ if (busy >= sdev->queue_depth)
+ goto out_dec;
+
+ return 1;
+out_dec:
+ atomic_dec(&sdev->device_busy);
+ return 0;
+}
+
+/*
+ * scsi_target_queue_ready: checks if there we can send commands to target
+ * @sdev: scsi device on starget to check.
+ */
+static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
+ struct scsi_device *sdev)
+{
+ struct scsi_target *starget = scsi_target(sdev);
+ unsigned int busy;
+
+ if (starget->single_lun) {
+ spin_lock_irq(shost->host_lock);
+ if (starget->starget_sdev_user &&
+ starget->starget_sdev_user != sdev) {
+ spin_unlock_irq(shost->host_lock);
+ return 0;
+ }
+ starget->starget_sdev_user = sdev;
+ spin_unlock_irq(shost->host_lock);
+ }
+
+ if (starget->can_queue <= 0)
+ return 1;
+
+ busy = atomic_inc_return(&starget->target_busy) - 1;
+ if (atomic_read(&starget->target_blocked) > 0) {
+ if (busy)
+ goto starved;
+
+ /*
+ * unblock after target_blocked iterates to zero
+ */
+ if (atomic_dec_return(&starget->target_blocked) > 0)
+ goto out_dec;
+
+ SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
+ "unblocking target at zero depth\n"));
+ }
+
+ if (busy >= starget->can_queue)
+ goto starved;
+
+ return 1;
+
+starved:
+ spin_lock_irq(shost->host_lock);
+ list_move_tail(&sdev->starved_entry, &shost->starved_list);
+ spin_unlock_irq(shost->host_lock);
+out_dec:
+ if (starget->can_queue > 0)
+ atomic_dec(&starget->target_busy);
+ return 0;
+}
+
+/*
+ * scsi_host_queue_ready: if we can send requests to shost, return 1 else
+ * return 0. We must end up running the queue again whenever 0 is
+ * returned, else IO can hang.
+ */
+static inline int scsi_host_queue_ready(struct request_queue *q,
+ struct Scsi_Host *shost,
+ struct scsi_device *sdev)
+{
+ unsigned int busy;
+
+ if (scsi_host_in_recovery(shost))
+ return 0;
+
+ busy = atomic_inc_return(&shost->host_busy) - 1;
+ if (atomic_read(&shost->host_blocked) > 0) {
+ if (busy)
+ goto starved;
+
+ /*
+ * unblock after host_blocked iterates to zero
+ */
+ if (atomic_dec_return(&shost->host_blocked) > 0)
+ goto out_dec;
+
+ SCSI_LOG_MLQUEUE(3,
+ shost_printk(KERN_INFO, shost,
+ "unblocking host at zero depth\n"));
+ }
+
+ if (shost->can_queue > 0 && busy >= shost->can_queue)
+ goto starved;
+ if (shost->host_self_blocked)
+ goto starved;
+
+ /* We're OK to process the command, so we can't be starved */
+ if (!list_empty(&sdev->starved_entry)) {
+ spin_lock_irq(shost->host_lock);
+ if (!list_empty(&sdev->starved_entry))
+ list_del_init(&sdev->starved_entry);
+ spin_unlock_irq(shost->host_lock);
+ }
+
+ return 1;
+
+starved:
+ spin_lock_irq(shost->host_lock);
+ if (list_empty(&sdev->starved_entry))
+ list_add_tail(&sdev->starved_entry, &shost->starved_list);
+ spin_unlock_irq(shost->host_lock);
+out_dec:
+ atomic_dec(&shost->host_busy);
+ return 0;
+}
+
+/*
+ * Busy state exporting function for request stacking drivers.
+ *
+ * For efficiency, no lock is taken to check the busy state of
+ * shost/starget/sdev, since the returned value is not guaranteed and
+ * may be changed after request stacking drivers call the function,
+ * regardless of taking lock or not.
+ *
+ * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi
+ * needs to return 'not busy'. Otherwise, request stacking drivers
+ * may hold requests forever.
+ */
+static int scsi_lld_busy(struct request_queue *q)
+{
+ struct scsi_device *sdev = q->queuedata;
+ struct Scsi_Host *shost;
+
+ if (blk_queue_dying(q))
+ return 0;
+
+ shost = sdev->host;
+
+ /*
+ * Ignore host/starget busy state.
+ * Since block layer does not have a concept of fairness across
+ * multiple queues, congestion of host/starget needs to be handled
+ * in SCSI layer.
+ */
+ if (scsi_host_in_recovery(shost) || scsi_device_is_busy(sdev))
+ return 1;
+
+ return 0;
+}
+
+/*
+ * Kill a request for a dead device
+ */
+static void scsi_kill_request(struct request *req, struct request_queue *q)
+{
+ struct scsi_cmnd *cmd = req->special;
+ struct scsi_device *sdev;
+ struct scsi_target *starget;
+ struct Scsi_Host *shost;
+
+ blk_start_request(req);
+
+ scmd_printk(KERN_INFO, cmd, "killing request\n");
+
+ sdev = cmd->device;
+ starget = scsi_target(sdev);
+ shost = sdev->host;
+ scsi_init_cmd_errh(cmd);
+ cmd->result = DID_NO_CONNECT << 16;
+ atomic_inc(&cmd->device->iorequest_cnt);
+
+ /*
+ * SCSI request completion path will do scsi_device_unbusy(),
+ * bump busy counts. To bump the counters, we need to dance
+ * with the locks as normal issue path does.
+ */
+ atomic_inc(&sdev->device_busy);
+ atomic_inc(&shost->host_busy);
+ if (starget->can_queue > 0)
+ atomic_inc(&starget->target_busy);
+
+ blk_complete_request(req);
+}
+
+static void scsi_softirq_done(struct request *rq)
+{
+ struct scsi_cmnd *cmd = rq->special;
+ unsigned long wait_for = (cmd->allowed + 1) * rq->timeout;
+ int disposition;
+
+ INIT_LIST_HEAD(&cmd->eh_entry);
+
+ atomic_inc(&cmd->device->iodone_cnt);
+ if (cmd->result)
+ atomic_inc(&cmd->device->ioerr_cnt);
+
+ disposition = scsi_decide_disposition(cmd);
+ if (disposition != SUCCESS &&
+ time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
+ sdev_printk(KERN_ERR, cmd->device,
+ "timing out command, waited %lus\n",
+ wait_for/HZ);
+ disposition = SUCCESS;
+ }
+
+ scsi_log_completion(cmd, disposition);
+
+ switch (disposition) {
+ case SUCCESS:
+ scsi_finish_command(cmd);
+ break;
+ case NEEDS_RETRY:
+ scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
+ break;
+ case ADD_TO_MLQUEUE:
+ scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
+ break;
+ default:
+ if (!scsi_eh_scmd_add(cmd, 0))
+ scsi_finish_command(cmd);
+ }
+}
+
+/**
+ * scsi_dispatch_command - Dispatch a command to the low-level driver.
+ * @cmd: command block we are dispatching.
+ *
+ * Return: nonzero return request was rejected and device's queue needs to be
+ * plugged.
+ */
+static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ int rtn = 0;
+
+ atomic_inc(&cmd->device->iorequest_cnt);
+
+ /* check if the device is still usable */
+ if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
+ /* in SDEV_DEL we error all commands. DID_NO_CONNECT
+ * returns an immediate error upwards, and signals
+ * that the device is no longer present */
+ cmd->result = DID_NO_CONNECT << 16;
+ goto done;
+ }
+
+ /* Check to see if the scsi lld made this device blocked. */
+ if (unlikely(scsi_device_blocked(cmd->device))) {
+ /*
+ * in blocked state, the command is just put back on
+ * the device queue. The suspend state has already
+ * blocked the queue so future requests should not
+ * occur until the device transitions out of the
+ * suspend state.
+ */
+ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
+ "queuecommand : device blocked\n"));
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+
+ /* Store the LUN value in cmnd, if needed. */
+ if (cmd->device->lun_in_cdb)
+ cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
+ (cmd->device->lun << 5 & 0xe0);
+
+ scsi_log_send(cmd);
+
+ /*
+ * Before we queue this command, check if the command
+ * length exceeds what the host adapter can handle.
+ */
+ if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
+ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
+ "queuecommand : command too long. "
+ "cdb_size=%d host->max_cmd_len=%d\n",
+ cmd->cmd_len, cmd->device->host->max_cmd_len));
+ cmd->result = (DID_ABORT << 16);
+ goto done;
+ }
+
+ if (unlikely(host->shost_state == SHOST_DEL)) {
+ cmd->result = (DID_NO_CONNECT << 16);
+ goto done;
+
+ }
+
+ trace_scsi_dispatch_cmd_start(cmd);
+ rtn = host->hostt->queuecommand(host, cmd);
+ if (rtn) {
+ trace_scsi_dispatch_cmd_error(cmd, rtn);
+ if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
+ rtn != SCSI_MLQUEUE_TARGET_BUSY)
+ rtn = SCSI_MLQUEUE_HOST_BUSY;
+
+ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
+ "queuecommand : request rejected\n"));
+ }
+
+ return rtn;
+ done:
+ cmd->scsi_done(cmd);
+ return 0;
+}
+
+/**
+ * scsi_done - Invoke completion on finished SCSI command.
+ * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives
+ * ownership back to SCSI Core -- i.e. the LLDD has finished with it.
+ *
+ * Description: This function is the mid-level's (SCSI Core) interrupt routine,
+ * which regains ownership of the SCSI command (de facto) from a LLDD, and
+ * calls blk_complete_request() for further processing.
+ *
+ * This function is interrupt context safe.
+ */
+static void scsi_done(struct scsi_cmnd *cmd)
+{
+ trace_scsi_dispatch_cmd_done(cmd);
+ blk_complete_request(cmd->request);
+}
+
+/*
+ * Function: scsi_request_fn()
+ *
+ * Purpose: Main strategy routine for SCSI.
+ *
+ * Arguments: q - Pointer to actual queue.
+ *
+ * Returns: Nothing
+ *
+ * Lock status: IO request lock assumed to be held when called.
+ */
+static void scsi_request_fn(struct request_queue *q)
+ __releases(q->queue_lock)
+ __acquires(q->queue_lock)
+{
+ struct scsi_device *sdev = q->queuedata;
+ struct Scsi_Host *shost;
+ struct scsi_cmnd *cmd;
+ struct request *req;
+
+ /*
+ * To start with, we keep looping until the queue is empty, or until
+ * the host is no longer able to accept any more requests.
+ */
+ shost = sdev->host;
+ for (;;) {
+ int rtn;
+ /*
+ * get next queueable request. We do this early to make sure
+ * that the request is fully prepared even if we cannot
+ * accept it.
+ */
+ req = blk_peek_request(q);
+ if (!req)
+ break;
+
+ if (unlikely(!scsi_device_online(sdev))) {
+ sdev_printk(KERN_ERR, sdev,
+ "rejecting I/O to offline device\n");
+ scsi_kill_request(req, q);
+ continue;
+ }
+
+ if (!scsi_dev_queue_ready(q, sdev))
+ break;
+
+ /*
+ * Remove the request from the request list.
+ */
+ if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req)))
+ blk_start_request(req);
+
+ spin_unlock_irq(q->queue_lock);
+ cmd = req->special;
+ if (unlikely(cmd == NULL)) {
+ printk(KERN_CRIT "impossible request in %s.\n"
+ "please mail a stack trace to "
+ "linux-scsi@vger.kernel.org\n",
+ __func__);
+ blk_dump_rq_flags(req, "foo");
+ BUG();
+ }
+
+ /*
+ * We hit this when the driver is using a host wide
+ * tag map. For device level tag maps the queue_depth check
+ * in the device ready fn would prevent us from trying
+ * to allocate a tag. Since the map is a shared host resource
+ * we add the dev to the starved list so it eventually gets
+ * a run when a tag is freed.
+ */
+ if (blk_queue_tagged(q) && !(req->cmd_flags & REQ_QUEUED)) {
+ spin_lock_irq(shost->host_lock);
+ if (list_empty(&sdev->starved_entry))
+ list_add_tail(&sdev->starved_entry,
+ &shost->starved_list);
+ spin_unlock_irq(shost->host_lock);
+ goto not_ready;
+ }
+
+ if (!scsi_target_queue_ready(shost, sdev))
+ goto not_ready;
+
+ if (!scsi_host_queue_ready(q, shost, sdev))
+ goto host_not_ready;
+
+ if (sdev->simple_tags)
+ cmd->flags |= SCMD_TAGGED;
+ else
+ cmd->flags &= ~SCMD_TAGGED;
+
+ /*
+ * Finally, initialize any error handling parameters, and set up
+ * the timers for timeouts.
+ */
+ scsi_init_cmd_errh(cmd);
+
+ /*
+ * Dispatch the command to the low-level driver.
+ */
+ cmd->scsi_done = scsi_done;
+ rtn = scsi_dispatch_cmd(cmd);
+ if (rtn) {
+ scsi_queue_insert(cmd, rtn);
+ spin_lock_irq(q->queue_lock);
+ goto out_delay;
+ }
+ spin_lock_irq(q->queue_lock);
+ }
+
+ return;
+
+ host_not_ready:
+ if (scsi_target(sdev)->can_queue > 0)
+ atomic_dec(&scsi_target(sdev)->target_busy);
+ not_ready:
+ /*
+ * lock q, handle tag, requeue req, and decrement device_busy. We
+ * must return with queue_lock held.
+ *
+ * Decrementing device_busy without checking it is OK, as all such
+ * cases (host limits or settings) should run the queue at some
+ * later time.
+ */
+ spin_lock_irq(q->queue_lock);
+ blk_requeue_request(q, req);
+ atomic_dec(&sdev->device_busy);
+out_delay:
+ if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
+ blk_delay_queue(q, SCSI_QUEUE_DELAY);
+}
+
+static inline int prep_to_mq(int ret)
+{
+ switch (ret) {
+ case BLKPREP_OK:
+ return 0;
+ case BLKPREP_DEFER:
+ return BLK_MQ_RQ_QUEUE_BUSY;
+ default:
+ return BLK_MQ_RQ_QUEUE_ERROR;
+ }
+}
+
+static int scsi_mq_prep_fn(struct request *req)
+{
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
+ struct scsi_device *sdev = req->q->queuedata;
+ struct Scsi_Host *shost = sdev->host;
+ unsigned char *sense_buf = cmd->sense_buffer;
+ struct scatterlist *sg;
+
+ memset(cmd, 0, sizeof(struct scsi_cmnd));
+
+ req->special = cmd;
+
+ cmd->request = req;
+ cmd->device = sdev;
+ cmd->sense_buffer = sense_buf;
+
+ cmd->tag = req->tag;
+
+ cmd->cmnd = req->cmd;
+ cmd->prot_op = SCSI_PROT_NORMAL;
+
+ INIT_LIST_HEAD(&cmd->list);
+ INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
+ cmd->jiffies_at_alloc = jiffies;
+
+ if (shost->use_cmd_list) {
+ spin_lock_irq(&sdev->list_lock);
+ list_add_tail(&cmd->list, &sdev->cmd_list);
+ spin_unlock_irq(&sdev->list_lock);
+ }
+
+ sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
+ cmd->sdb.table.sgl = sg;
+
+ if (scsi_host_get_prot(shost)) {
+ cmd->prot_sdb = (void *)sg +
+ min_t(unsigned int,
+ shost->sg_tablesize, SCSI_MAX_SG_SEGMENTS) *
+ sizeof(struct scatterlist);
+ memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer));
+
+ cmd->prot_sdb->table.sgl =
+ (struct scatterlist *)(cmd->prot_sdb + 1);
+ }
+
+ if (blk_bidi_rq(req)) {
+ struct request *next_rq = req->next_rq;
+ struct scsi_data_buffer *bidi_sdb = blk_mq_rq_to_pdu(next_rq);
+
+ memset(bidi_sdb, 0, sizeof(struct scsi_data_buffer));
+ bidi_sdb->table.sgl =
+ (struct scatterlist *)(bidi_sdb + 1);
+
+ next_rq->special = bidi_sdb;
+ }
+
+ blk_mq_start_request(req);
+
+ return scsi_setup_cmnd(sdev, req);
+}
+
+static void scsi_mq_done(struct scsi_cmnd *cmd)
+{
+ trace_scsi_dispatch_cmd_done(cmd);
+ blk_mq_complete_request(cmd->request);
+}
+
+static int scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
+ const struct blk_mq_queue_data *bd)
+{
+ struct request *req = bd->rq;
+ struct request_queue *q = req->q;
+ struct scsi_device *sdev = q->queuedata;
+ struct Scsi_Host *shost = sdev->host;
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
+ int ret;
+ int reason;
+
+ ret = prep_to_mq(scsi_prep_state_check(sdev, req));
+ if (ret)
+ goto out;
+
+ ret = BLK_MQ_RQ_QUEUE_BUSY;
+ if (!get_device(&sdev->sdev_gendev))
+ goto out;
+
+ if (!scsi_dev_queue_ready(q, sdev))
+ goto out_put_device;
+ if (!scsi_target_queue_ready(shost, sdev))
+ goto out_dec_device_busy;
+ if (!scsi_host_queue_ready(q, shost, sdev))
+ goto out_dec_target_busy;
+
+
+ if (!(req->cmd_flags & REQ_DONTPREP)) {
+ ret = prep_to_mq(scsi_mq_prep_fn(req));
+ if (ret)
+ goto out_dec_host_busy;
+ req->cmd_flags |= REQ_DONTPREP;
+ } else {
+ blk_mq_start_request(req);
+ }
+
+ if (sdev->simple_tags)
+ cmd->flags |= SCMD_TAGGED;
+ else
+ cmd->flags &= ~SCMD_TAGGED;
+
+ scsi_init_cmd_errh(cmd);
+ cmd->scsi_done = scsi_mq_done;
+
+ reason = scsi_dispatch_cmd(cmd);
+ if (reason) {
+ scsi_set_blocked(cmd, reason);
+ ret = BLK_MQ_RQ_QUEUE_BUSY;
+ goto out_dec_host_busy;
+ }
+
+ return BLK_MQ_RQ_QUEUE_OK;
+
+out_dec_host_busy:
+ atomic_dec(&shost->host_busy);
+out_dec_target_busy:
+ if (scsi_target(sdev)->can_queue > 0)
+ atomic_dec(&scsi_target(sdev)->target_busy);
+out_dec_device_busy:
+ atomic_dec(&sdev->device_busy);
+out_put_device:
+ put_device(&sdev->sdev_gendev);
+out:
+ switch (ret) {
+ case BLK_MQ_RQ_QUEUE_BUSY:
+ blk_mq_stop_hw_queue(hctx);
+ if (atomic_read(&sdev->device_busy) == 0 &&
+ !scsi_device_blocked(sdev))
+ blk_mq_delay_queue(hctx, SCSI_QUEUE_DELAY);
+ break;
+ case BLK_MQ_RQ_QUEUE_ERROR:
+ /*
+ * Make sure to release all allocated ressources when
+ * we hit an error, as we will never see this command
+ * again.
+ */
+ if (req->cmd_flags & REQ_DONTPREP)
+ scsi_mq_uninit_cmd(cmd);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static enum blk_eh_timer_return scsi_timeout(struct request *req,
+ bool reserved)
+{
+ if (reserved)
+ return BLK_EH_RESET_TIMER;
+ return scsi_times_out(req);
+}
+
+static int scsi_init_request(void *data, struct request *rq,
+ unsigned int hctx_idx, unsigned int request_idx,
+ unsigned int numa_node)
+{
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
+
+ cmd->sense_buffer = kzalloc_node(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL,
+ numa_node);
+ if (!cmd->sense_buffer)
+ return -ENOMEM;
+ return 0;
+}
+
+static void scsi_exit_request(void *data, struct request *rq,
+ unsigned int hctx_idx, unsigned int request_idx)
+{
+ struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
+
+ kfree(cmd->sense_buffer);
+}
+
+static u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
+{
+ struct device *host_dev;
+ u64 bounce_limit = 0xffffffff;
+
+ if (shost->unchecked_isa_dma)
+ return BLK_BOUNCE_ISA;
+ /*
+ * Platforms with virtual-DMA translation
+ * hardware have no practical limit.
+ */
+ if (!PCI_DMA_BUS_IS_PHYS)
+ return BLK_BOUNCE_ANY;
+
+ host_dev = scsi_get_device(shost);
+ if (host_dev && host_dev->dma_mask)
+ bounce_limit = (u64)dma_max_pfn(host_dev) << PAGE_SHIFT;
+
+ return bounce_limit;
+}
+
+static void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q)
+{
+ struct device *dev = shost->dma_dev;
+
+ /*
+ * this limit is imposed by hardware restrictions
+ */
+ blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
+ SCSI_MAX_SG_CHAIN_SEGMENTS));
+
+ if (scsi_host_prot_dma(shost)) {
+ shost->sg_prot_tablesize =
+ min_not_zero(shost->sg_prot_tablesize,
+ (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS);
+ BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize);
+ blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize);
+ }
+
+ blk_queue_max_hw_sectors(q, shost->max_sectors);
+ blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost));
+ blk_queue_segment_boundary(q, shost->dma_boundary);
+ dma_set_seg_boundary(dev, shost->dma_boundary);
+
+ blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
+
+ if (!shost->use_clustering)
+ q->limits.cluster = 0;
+
+ /*
+ * set a reasonable default alignment on word boundaries: the
+ * host and device may alter it using
+ * blk_queue_update_dma_alignment() later.
+ */
+ blk_queue_dma_alignment(q, 0x03);
+}
+
+struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
+ request_fn_proc *request_fn)
+{
+ struct request_queue *q;
+
+ q = blk_init_queue(request_fn, NULL);
+ if (!q)
+ return NULL;
+ __scsi_init_queue(shost, q);
+ return q;
+}
+EXPORT_SYMBOL(__scsi_alloc_queue);
+
+struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
+{
+ struct request_queue *q;
+
+ q = __scsi_alloc_queue(sdev->host, scsi_request_fn);
+ if (!q)
+ return NULL;
+
+ blk_queue_prep_rq(q, scsi_prep_fn);
+ blk_queue_unprep_rq(q, scsi_unprep_fn);
+ blk_queue_softirq_done(q, scsi_softirq_done);
+ blk_queue_rq_timed_out(q, scsi_times_out);
+ blk_queue_lld_busy(q, scsi_lld_busy);
+ return q;
+}
+
+static struct blk_mq_ops scsi_mq_ops = {
+ .map_queue = blk_mq_map_queue,
+ .queue_rq = scsi_queue_rq,
+ .complete = scsi_softirq_done,
+ .timeout = scsi_timeout,
+ .init_request = scsi_init_request,
+ .exit_request = scsi_exit_request,
+};
+
+struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev)
+{
+ sdev->request_queue = blk_mq_init_queue(&sdev->host->tag_set);
+ if (IS_ERR(sdev->request_queue))
+ return NULL;
+
+ sdev->request_queue->queuedata = sdev;
+ __scsi_init_queue(sdev->host, sdev->request_queue);
+ return sdev->request_queue;
+}
+
+int scsi_mq_setup_tags(struct Scsi_Host *shost)
+{
+ unsigned int cmd_size, sgl_size, tbl_size;
+
+ tbl_size = shost->sg_tablesize;
+ if (tbl_size > SCSI_MAX_SG_SEGMENTS)
+ tbl_size = SCSI_MAX_SG_SEGMENTS;
+ sgl_size = tbl_size * sizeof(struct scatterlist);
+ cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size;
+ if (scsi_host_get_prot(shost))
+ cmd_size += sizeof(struct scsi_data_buffer) + sgl_size;
+
+ memset(&shost->tag_set, 0, sizeof(shost->tag_set));
+ shost->tag_set.ops = &scsi_mq_ops;
+ shost->tag_set.nr_hw_queues = shost->nr_hw_queues ? : 1;
+ shost->tag_set.queue_depth = shost->can_queue;
+ shost->tag_set.cmd_size = cmd_size;
+ shost->tag_set.numa_node = NUMA_NO_NODE;
+ shost->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
+ shost->tag_set.flags |=
+ BLK_ALLOC_POLICY_TO_MQ_FLAG(shost->hostt->tag_alloc_policy);
+ shost->tag_set.driver_data = shost;
+
+ return blk_mq_alloc_tag_set(&shost->tag_set);
+}
+
+void scsi_mq_destroy_tags(struct Scsi_Host *shost)
+{
+ blk_mq_free_tag_set(&shost->tag_set);
+}
+
+/*
+ * Function: scsi_block_requests()
+ *
+ * Purpose: Utility function used by low-level drivers to prevent further
+ * commands from being queued to the device.
+ *
+ * Arguments: shost - Host in question
+ *
+ * Returns: Nothing
+ *
+ * Lock status: No locks are assumed held.
+ *
+ * Notes: There is no timer nor any other means by which the requests
+ * get unblocked other than the low-level driver calling
+ * scsi_unblock_requests().
+ */
+void scsi_block_requests(struct Scsi_Host *shost)
+{
+ shost->host_self_blocked = 1;
+}
+EXPORT_SYMBOL(scsi_block_requests);
+
+/*
+ * Function: scsi_unblock_requests()
+ *
+ * Purpose: Utility function used by low-level drivers to allow further
+ * commands from being queued to the device.
+ *
+ * Arguments: shost - Host in question
+ *
+ * Returns: Nothing
+ *
+ * Lock status: No locks are assumed held.
+ *
+ * Notes: There is no timer nor any other means by which the requests
+ * get unblocked other than the low-level driver calling
+ * scsi_unblock_requests().
+ *
+ * This is done as an API function so that changes to the
+ * internals of the scsi mid-layer won't require wholesale
+ * changes to drivers that use this feature.
+ */
+void scsi_unblock_requests(struct Scsi_Host *shost)
+{
+ shost->host_self_blocked = 0;
+ scsi_run_host_queues(shost);
+}
+EXPORT_SYMBOL(scsi_unblock_requests);
+
+int __init scsi_init_queue(void)
+{
+ int i;
+
+ scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
+ sizeof(struct scsi_data_buffer),
+ 0, 0, NULL);
+ if (!scsi_sdb_cache) {
+ printk(KERN_ERR "SCSI: can't init scsi sdb cache\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < SG_MEMPOOL_NR; i++) {
+ struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
+ int size = sgp->size * sizeof(struct scatterlist);
+
+ sgp->slab = kmem_cache_create(sgp->name, size, 0,
+ SLAB_HWCACHE_ALIGN, NULL);
+ if (!sgp->slab) {
+ printk(KERN_ERR "SCSI: can't init sg slab %s\n",
+ sgp->name);
+ goto cleanup_sdb;
+ }
+
+ sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE,
+ sgp->slab);
+ if (!sgp->pool) {
+ printk(KERN_ERR "SCSI: can't init sg mempool %s\n",
+ sgp->name);
+ goto cleanup_sdb;
+ }
+ }
+
+ return 0;
+
+cleanup_sdb:
+ for (i = 0; i < SG_MEMPOOL_NR; i++) {
+ struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
+ if (sgp->pool)
+ mempool_destroy(sgp->pool);
+ if (sgp->slab)
+ kmem_cache_destroy(sgp->slab);
+ }
+ kmem_cache_destroy(scsi_sdb_cache);
+
+ return -ENOMEM;
+}
+
+void scsi_exit_queue(void)
+{
+ int i;
+
+ kmem_cache_destroy(scsi_sdb_cache);
+
+ for (i = 0; i < SG_MEMPOOL_NR; i++) {
+ struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
+ mempool_destroy(sgp->pool);
+ kmem_cache_destroy(sgp->slab);
+ }
+}
+
+/**
+ * scsi_mode_select - issue a mode select
+ * @sdev: SCSI device to be queried
+ * @pf: Page format bit (1 == standard, 0 == vendor specific)
+ * @sp: Save page bit (0 == don't save, 1 == save)
+ * @modepage: mode page being requested
+ * @buffer: request buffer (may not be smaller than eight bytes)
+ * @len: length of request buffer.
+ * @timeout: command timeout
+ * @retries: number of retries before failing
+ * @data: returns a structure abstracting the mode header data
+ * @sshdr: place to put sense data (or NULL if no sense to be collected).
+ * must be SCSI_SENSE_BUFFERSIZE big.
+ *
+ * Returns zero if successful; negative error number or scsi
+ * status on error
+ *
+ */
+int
+scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
+ unsigned char *buffer, int len, int timeout, int retries,
+ struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
+{
+ unsigned char cmd[10];
+ unsigned char *real_buffer;
+ int ret;
+
+ memset(cmd, 0, sizeof(cmd));
+ cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
+
+ if (sdev->use_10_for_ms) {
+ if (len > 65535)
+ return -EINVAL;
+ real_buffer = kmalloc(8 + len, GFP_KERNEL);
+ if (!real_buffer)
+ return -ENOMEM;
+ memcpy(real_buffer + 8, buffer, len);
+ len += 8;
+ real_buffer[0] = 0;
+ real_buffer[1] = 0;
+ real_buffer[2] = data->medium_type;
+ real_buffer[3] = data->device_specific;
+ real_buffer[4] = data->longlba ? 0x01 : 0;
+ real_buffer[5] = 0;
+ real_buffer[6] = data->block_descriptor_length >> 8;
+ real_buffer[7] = data->block_descriptor_length;
+
+ cmd[0] = MODE_SELECT_10;
+ cmd[7] = len >> 8;
+ cmd[8] = len;
+ } else {
+ if (len > 255 || data->block_descriptor_length > 255 ||
+ data->longlba)
+ return -EINVAL;
+
+ real_buffer = kmalloc(4 + len, GFP_KERNEL);
+ if (!real_buffer)
+ return -ENOMEM;
+ memcpy(real_buffer + 4, buffer, len);
+ len += 4;
+ real_buffer[0] = 0;
+ real_buffer[1] = data->medium_type;
+ real_buffer[2] = data->device_specific;
+ real_buffer[3] = data->block_descriptor_length;
+
+
+ cmd[0] = MODE_SELECT;
+ cmd[4] = len;
+ }
+
+ ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len,
+ sshdr, timeout, retries, NULL);
+ kfree(real_buffer);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(scsi_mode_select);
+
+/**
+ * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
+ * @sdev: SCSI device to be queried
+ * @dbd: set if mode sense will allow block descriptors to be returned
+ * @modepage: mode page being requested
+ * @buffer: request buffer (may not be smaller than eight bytes)
+ * @len: length of request buffer.
+ * @timeout: command timeout
+ * @retries: number of retries before failing
+ * @data: returns a structure abstracting the mode header data
+ * @sshdr: place to put sense data (or NULL if no sense to be collected).
+ * must be SCSI_SENSE_BUFFERSIZE big.
+ *
+ * Returns zero if unsuccessful, or the header offset (either 4
+ * or 8 depending on whether a six or ten byte command was
+ * issued) if successful.
+ */
+int
+scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
+ unsigned char *buffer, int len, int timeout, int retries,
+ struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
+{
+ unsigned char cmd[12];
+ int use_10_for_ms;
+ int header_length;
+ int result;
+ struct scsi_sense_hdr my_sshdr;
+
+ memset(data, 0, sizeof(*data));
+ memset(&cmd[0], 0, 12);
+ cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */
+ cmd[2] = modepage;
+
+ /* caller might not be interested in sense, but we need it */
+ if (!sshdr)
+ sshdr = &my_sshdr;
+
+ retry:
+ use_10_for_ms = sdev->use_10_for_ms;
+
+ if (use_10_for_ms) {
+ if (len < 8)
+ len = 8;
+
+ cmd[0] = MODE_SENSE_10;
+ cmd[8] = len;
+ header_length = 8;
+ } else {
+ if (len < 4)
+ len = 4;
+
+ cmd[0] = MODE_SENSE;
+ cmd[4] = len;
+ header_length = 4;
+ }
+
+ memset(buffer, 0, len);
+
+ result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
+ sshdr, timeout, retries, NULL);
+
+ /* This code looks awful: what it's doing is making sure an
+ * ILLEGAL REQUEST sense return identifies the actual command
+ * byte as the problem. MODE_SENSE commands can return
+ * ILLEGAL REQUEST if the code page isn't supported */
+
+ if (use_10_for_ms && !scsi_status_is_good(result) &&
+ (driver_byte(result) & DRIVER_SENSE)) {
+ if (scsi_sense_valid(sshdr)) {
+ if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
+ (sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
+ /*
+ * Invalid command operation code
+ */
+ sdev->use_10_for_ms = 0;
+ goto retry;
+ }
+ }
+ }
+
+ if(scsi_status_is_good(result)) {
+ if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
+ (modepage == 6 || modepage == 8))) {
+ /* Initio breakage? */
+ header_length = 0;
+ data->length = 13;
+ data->medium_type = 0;
+ data->device_specific = 0;
+ data->longlba = 0;
+ data->block_descriptor_length = 0;
+ } else if(use_10_for_ms) {
+ data->length = buffer[0]*256 + buffer[1] + 2;
+ data->medium_type = buffer[2];
+ data->device_specific = buffer[3];
+ data->longlba = buffer[4] & 0x01;
+ data->block_descriptor_length = buffer[6]*256
+ + buffer[7];
+ } else {
+ data->length = buffer[0] + 1;
+ data->medium_type = buffer[1];
+ data->device_specific = buffer[2];
+ data->block_descriptor_length = buffer[3];
+ }
+ data->header_length = header_length;
+ }
+
+ return result;
+}
+EXPORT_SYMBOL(scsi_mode_sense);
+
+/**
+ * scsi_test_unit_ready - test if unit is ready
+ * @sdev: scsi device to change the state of.
+ * @timeout: command timeout
+ * @retries: number of retries before failing
+ * @sshdr_external: Optional pointer to struct scsi_sense_hdr for
+ * returning sense. Make sure that this is cleared before passing
+ * in.
+ *
+ * Returns zero if unsuccessful or an error if TUR failed. For
+ * removable media, UNIT_ATTENTION sets ->changed flag.
+ **/
+int
+scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
+ struct scsi_sense_hdr *sshdr_external)
+{
+ char cmd[] = {
+ TEST_UNIT_READY, 0, 0, 0, 0, 0,
+ };
+ struct scsi_sense_hdr *sshdr;
+ int result;
+
+ if (!sshdr_external)
+ sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
+ else
+ sshdr = sshdr_external;
+
+ /* try to eat the UNIT_ATTENTION if there are enough retries */
+ do {
+ result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
+ timeout, retries, NULL);
+ if (sdev->removable && scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION)
+ sdev->changed = 1;
+ } while (scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION && --retries);
+
+ if (!sshdr_external)
+ kfree(sshdr);
+ return result;
+}
+EXPORT_SYMBOL(scsi_test_unit_ready);
+
+/**
+ * scsi_device_set_state - Take the given device through the device state model.
+ * @sdev: scsi device to change the state of.
+ * @state: state to change to.
+ *
+ * Returns zero if unsuccessful or an error if the requested
+ * transition is illegal.
+ */
+int
+scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
+{
+ enum scsi_device_state oldstate = sdev->sdev_state;
+
+ if (state == oldstate)
+ return 0;
+
+ switch (state) {
+ case SDEV_CREATED:
+ switch (oldstate) {
+ case SDEV_CREATED_BLOCK:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_RUNNING:
+ switch (oldstate) {
+ case SDEV_CREATED:
+ case SDEV_OFFLINE:
+ case SDEV_TRANSPORT_OFFLINE:
+ case SDEV_QUIESCE:
+ case SDEV_BLOCK:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_QUIESCE:
+ switch (oldstate) {
+ case SDEV_RUNNING:
+ case SDEV_OFFLINE:
+ case SDEV_TRANSPORT_OFFLINE:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_OFFLINE:
+ case SDEV_TRANSPORT_OFFLINE:
+ switch (oldstate) {
+ case SDEV_CREATED:
+ case SDEV_RUNNING:
+ case SDEV_QUIESCE:
+ case SDEV_BLOCK:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_BLOCK:
+ switch (oldstate) {
+ case SDEV_RUNNING:
+ case SDEV_CREATED_BLOCK:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_CREATED_BLOCK:
+ switch (oldstate) {
+ case SDEV_CREATED:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_CANCEL:
+ switch (oldstate) {
+ case SDEV_CREATED:
+ case SDEV_RUNNING:
+ case SDEV_QUIESCE:
+ case SDEV_OFFLINE:
+ case SDEV_TRANSPORT_OFFLINE:
+ case SDEV_BLOCK:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ case SDEV_DEL:
+ switch (oldstate) {
+ case SDEV_CREATED:
+ case SDEV_RUNNING:
+ case SDEV_OFFLINE:
+ case SDEV_TRANSPORT_OFFLINE:
+ case SDEV_CANCEL:
+ case SDEV_CREATED_BLOCK:
+ break;
+ default:
+ goto illegal;
+ }
+ break;
+
+ }
+ sdev->sdev_state = state;
+ return 0;
+
+ illegal:
+ SCSI_LOG_ERROR_RECOVERY(1,
+ sdev_printk(KERN_ERR, sdev,
+ "Illegal state transition %s->%s",
+ scsi_device_state_name(oldstate),
+ scsi_device_state_name(state))
+ );
+ return -EINVAL;
+}
+EXPORT_SYMBOL(scsi_device_set_state);
+
+/**
+ * sdev_evt_emit - emit a single SCSI device uevent
+ * @sdev: associated SCSI device
+ * @evt: event to emit
+ *
+ * Send a single uevent (scsi_event) to the associated scsi_device.
+ */
+static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
+{
+ int idx = 0;
+ char *envp[3];
+
+ switch (evt->evt_type) {
+ case SDEV_EVT_MEDIA_CHANGE:
+ envp[idx++] = "SDEV_MEDIA_CHANGE=1";
+ break;
+ case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
+ envp[idx++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED";
+ break;
+ case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
+ envp[idx++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED";
+ break;
+ case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
+ envp[idx++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED";
+ break;
+ case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
+ envp[idx++] = "SDEV_UA=MODE_PARAMETERS_CHANGED";
+ break;
+ case SDEV_EVT_LUN_CHANGE_REPORTED:
+ envp[idx++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED";
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+
+ envp[idx++] = NULL;
+
+ kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
+}
+
+/**
+ * sdev_evt_thread - send a uevent for each scsi event
+ * @work: work struct for scsi_device
+ *
+ * Dispatch queued events to their associated scsi_device kobjects
+ * as uevents.
+ */
+void scsi_evt_thread(struct work_struct *work)
+{
+ struct scsi_device *sdev;
+ enum scsi_device_event evt_type;
+ LIST_HEAD(event_list);
+
+ sdev = container_of(work, struct scsi_device, event_work);
+
+ for (evt_type = SDEV_EVT_FIRST; evt_type <= SDEV_EVT_LAST; evt_type++)
+ if (test_and_clear_bit(evt_type, sdev->pending_events))
+ sdev_evt_send_simple(sdev, evt_type, GFP_KERNEL);
+
+ while (1) {
+ struct scsi_event *evt;
+ struct list_head *this, *tmp;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_splice_init(&sdev->event_list, &event_list);
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+
+ if (list_empty(&event_list))
+ break;
+
+ list_for_each_safe(this, tmp, &event_list) {
+ evt = list_entry(this, struct scsi_event, node);
+ list_del(&evt->node);
+ scsi_evt_emit(sdev, evt);
+ kfree(evt);
+ }
+ }
+}
+
+/**
+ * sdev_evt_send - send asserted event to uevent thread
+ * @sdev: scsi_device event occurred on
+ * @evt: event to send
+ *
+ * Assert scsi device event asynchronously.
+ */
+void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
+{
+ unsigned long flags;
+
+#if 0
+ /* FIXME: currently this check eliminates all media change events
+ * for polled devices. Need to update to discriminate between AN
+ * and polled events */
+ if (!test_bit(evt->evt_type, sdev->supported_events)) {
+ kfree(evt);
+ return;
+ }
+#endif
+
+ spin_lock_irqsave(&sdev->list_lock, flags);
+ list_add_tail(&evt->node, &sdev->event_list);
+ schedule_work(&sdev->event_work);
+ spin_unlock_irqrestore(&sdev->list_lock, flags);
+}
+EXPORT_SYMBOL_GPL(sdev_evt_send);
+
+/**
+ * sdev_evt_alloc - allocate a new scsi event
+ * @evt_type: type of event to allocate
+ * @gfpflags: GFP flags for allocation
+ *
+ * Allocates and returns a new scsi_event.
+ */
+struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
+ gfp_t gfpflags)
+{
+ struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags);
+ if (!evt)
+ return NULL;
+
+ evt->evt_type = evt_type;
+ INIT_LIST_HEAD(&evt->node);
+
+ /* evt_type-specific initialization, if any */
+ switch (evt_type) {
+ case SDEV_EVT_MEDIA_CHANGE:
+ case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
+ case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
+ case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
+ case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
+ case SDEV_EVT_LUN_CHANGE_REPORTED:
+ default:
+ /* do nothing */
+ break;
+ }
+
+ return evt;
+}
+EXPORT_SYMBOL_GPL(sdev_evt_alloc);
+
+/**
+ * sdev_evt_send_simple - send asserted event to uevent thread
+ * @sdev: scsi_device event occurred on
+ * @evt_type: type of event to send
+ * @gfpflags: GFP flags for allocation
+ *
+ * Assert scsi device event asynchronously, given an event type.
+ */
+void sdev_evt_send_simple(struct scsi_device *sdev,
+ enum scsi_device_event evt_type, gfp_t gfpflags)
+{
+ struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags);
+ if (!evt) {
+ sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n",
+ evt_type);
+ return;
+ }
+
+ sdev_evt_send(sdev, evt);
+}
+EXPORT_SYMBOL_GPL(sdev_evt_send_simple);
+
+/**
+ * scsi_device_quiesce - Block user issued commands.
+ * @sdev: scsi device to quiesce.
+ *
+ * This works by trying to transition to the SDEV_QUIESCE state
+ * (which must be a legal transition). When the device is in this
+ * state, only special requests will be accepted, all others will
+ * be deferred. Since special requests may also be requeued requests,
+ * a successful return doesn't guarantee the device will be
+ * totally quiescent.
+ *
+ * Must be called with user context, may sleep.
+ *
+ * Returns zero if unsuccessful or an error if not.
+ */
+int
+scsi_device_quiesce(struct scsi_device *sdev)
+{
+ int err = scsi_device_set_state(sdev, SDEV_QUIESCE);
+ if (err)
+ return err;
+
+ scsi_run_queue(sdev->request_queue);
+ while (atomic_read(&sdev->device_busy)) {
+ msleep_interruptible(200);
+ scsi_run_queue(sdev->request_queue);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(scsi_device_quiesce);
+
+/**
+ * scsi_device_resume - Restart user issued commands to a quiesced device.
+ * @sdev: scsi device to resume.
+ *
+ * Moves the device from quiesced back to running and restarts the
+ * queues.
+ *
+ * Must be called with user context, may sleep.
+ */
+void scsi_device_resume(struct scsi_device *sdev)
+{
+ /* check if the device state was mutated prior to resume, and if
+ * so assume the state is being managed elsewhere (for example
+ * device deleted during suspend)
+ */
+ if (sdev->sdev_state != SDEV_QUIESCE ||
+ scsi_device_set_state(sdev, SDEV_RUNNING))
+ return;
+ scsi_run_queue(sdev->request_queue);
+}
+EXPORT_SYMBOL(scsi_device_resume);
+
+static void
+device_quiesce_fn(struct scsi_device *sdev, void *data)
+{
+ scsi_device_quiesce(sdev);
+}
+
+void
+scsi_target_quiesce(struct scsi_target *starget)
+{
+ starget_for_each_device(starget, NULL, device_quiesce_fn);
+}
+EXPORT_SYMBOL(scsi_target_quiesce);
+
+static void
+device_resume_fn(struct scsi_device *sdev, void *data)
+{
+ scsi_device_resume(sdev);
+}
+
+void
+scsi_target_resume(struct scsi_target *starget)
+{
+ starget_for_each_device(starget, NULL, device_resume_fn);
+}
+EXPORT_SYMBOL(scsi_target_resume);
+
+/**
+ * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state
+ * @sdev: device to block
+ *
+ * Block request made by scsi lld's to temporarily stop all
+ * scsi commands on the specified device. Called from interrupt
+ * or normal process context.
+ *
+ * Returns zero if successful or error if not
+ *
+ * Notes:
+ * This routine transitions the device to the SDEV_BLOCK state
+ * (which must be a legal transition). When the device is in this
+ * state, all commands are deferred until the scsi lld reenables
+ * the device with scsi_device_unblock or device_block_tmo fires.
+ */
+int
+scsi_internal_device_block(struct scsi_device *sdev)
+{
+ struct request_queue *q = sdev->request_queue;
+ unsigned long flags;
+ int err = 0;
+
+ err = scsi_device_set_state(sdev, SDEV_BLOCK);
+ if (err) {
+ err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK);
+
+ if (err)
+ return err;
+ }
+
+ /*
+ * The device has transitioned to SDEV_BLOCK. Stop the
+ * block layer from calling the midlayer with this device's
+ * request queue.
+ */
+ if (q->mq_ops) {
+ blk_mq_stop_hw_queues(q);
+ } else {
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_stop_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(scsi_internal_device_block);
+
+/**
+ * scsi_internal_device_unblock - resume a device after a block request
+ * @sdev: device to resume
+ * @new_state: state to set devices to after unblocking
+ *
+ * Called by scsi lld's or the midlayer to restart the device queue
+ * for the previously suspended scsi device. Called from interrupt or
+ * normal process context.
+ *
+ * Returns zero if successful or error if not.
+ *
+ * Notes:
+ * This routine transitions the device to the SDEV_RUNNING state
+ * or to one of the offline states (which must be a legal transition)
+ * allowing the midlayer to goose the queue for this device.
+ */
+int
+scsi_internal_device_unblock(struct scsi_device *sdev,
+ enum scsi_device_state new_state)
+{
+ struct request_queue *q = sdev->request_queue;
+ unsigned long flags;
+
+ /*
+ * Try to transition the scsi device to SDEV_RUNNING or one of the
+ * offlined states and goose the device queue if successful.
+ */
+ if ((sdev->sdev_state == SDEV_BLOCK) ||
+ (sdev->sdev_state == SDEV_TRANSPORT_OFFLINE))
+ sdev->sdev_state = new_state;
+ else if (sdev->sdev_state == SDEV_CREATED_BLOCK) {
+ if (new_state == SDEV_TRANSPORT_OFFLINE ||
+ new_state == SDEV_OFFLINE)
+ sdev->sdev_state = new_state;
+ else
+ sdev->sdev_state = SDEV_CREATED;
+ } else if (sdev->sdev_state != SDEV_CANCEL &&
+ sdev->sdev_state != SDEV_OFFLINE)
+ return -EINVAL;
+
+ if (q->mq_ops) {
+ blk_mq_start_stopped_hw_queues(q, false);
+ } else {
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_start_queue(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(scsi_internal_device_unblock);
+
+static void
+device_block(struct scsi_device *sdev, void *data)
+{
+ scsi_internal_device_block(sdev);
+}
+
+static int
+target_block(struct device *dev, void *data)
+{
+ if (scsi_is_target_device(dev))
+ starget_for_each_device(to_scsi_target(dev), NULL,
+ device_block);
+ return 0;
+}
+
+void
+scsi_target_block(struct device *dev)
+{
+ if (scsi_is_target_device(dev))
+ starget_for_each_device(to_scsi_target(dev), NULL,
+ device_block);
+ else
+ device_for_each_child(dev, NULL, target_block);
+}
+EXPORT_SYMBOL_GPL(scsi_target_block);
+
+static void
+device_unblock(struct scsi_device *sdev, void *data)
+{
+ scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data);
+}
+
+static int
+target_unblock(struct device *dev, void *data)
+{
+ if (scsi_is_target_device(dev))
+ starget_for_each_device(to_scsi_target(dev), data,
+ device_unblock);
+ return 0;
+}
+
+void
+scsi_target_unblock(struct device *dev, enum scsi_device_state new_state)
+{
+ if (scsi_is_target_device(dev))
+ starget_for_each_device(to_scsi_target(dev), &new_state,
+ device_unblock);
+ else
+ device_for_each_child(dev, &new_state, target_unblock);
+}
+EXPORT_SYMBOL_GPL(scsi_target_unblock);
+
+/**
+ * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
+ * @sgl: scatter-gather list
+ * @sg_count: number of segments in sg
+ * @offset: offset in bytes into sg, on return offset into the mapped area
+ * @len: bytes to map, on return number of bytes mapped
+ *
+ * Returns virtual address of the start of the mapped page
+ */
+void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
+ size_t *offset, size_t *len)
+{
+ int i;
+ size_t sg_len = 0, len_complete = 0;
+ struct scatterlist *sg;
+ struct page *page;
+
+ WARN_ON(!irqs_disabled());
+
+ for_each_sg(sgl, sg, sg_count, i) {
+ len_complete = sg_len; /* Complete sg-entries */
+ sg_len += sg->length;
+ if (sg_len > *offset)
+ break;
+ }
+
+ if (unlikely(i == sg_count)) {
+ printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
+ "elements %d\n",
+ __func__, sg_len, *offset, sg_count);
+ WARN_ON(1);
+ return NULL;
+ }
+
+ /* Offset starting from the beginning of first page in this sg-entry */
+ *offset = *offset - len_complete + sg->offset;
+
+ /* Assumption: contiguous pages can be accessed as "page + i" */
+ page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT));
+ *offset &= ~PAGE_MASK;
+
+ /* Bytes in this sg-entry from *offset to the end of the page */
+ sg_len = PAGE_SIZE - *offset;
+ if (*len > sg_len)
+ *len = sg_len;
+
+ return kmap_atomic(page);
+}
+EXPORT_SYMBOL(scsi_kmap_atomic_sg);
+
+/**
+ * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
+ * @virt: virtual address to be unmapped
+ */
+void scsi_kunmap_atomic_sg(void *virt)
+{
+ kunmap_atomic(virt);
+}
+EXPORT_SYMBOL(scsi_kunmap_atomic_sg);
+
+void sdev_disable_disk_events(struct scsi_device *sdev)
+{
+ atomic_inc(&sdev->disk_events_disable_depth);
+}
+EXPORT_SYMBOL(sdev_disable_disk_events);
+
+void sdev_enable_disk_events(struct scsi_device *sdev)
+{
+ if (WARN_ON_ONCE(atomic_read(&sdev->disk_events_disable_depth) <= 0))
+ return;
+ atomic_dec(&sdev->disk_events_disable_depth);
+}
+EXPORT_SYMBOL(sdev_enable_disk_events);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 54d7a6c..b995828 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1,3145 +1,107 @@
-/*
- * Copyright (C) 1999 Eric Youngdale
- * Copyright (C) 2014 Christoph Hellwig
- *
- * SCSI queueing library.
- * Initial versions: Eric Youngdale (eric@andante.org).
- * Based upon conversations with large numbers
- * of people at Linux Expo.
- */
-
-#include <linux/bio.h>
-#include <linux/bitops.h>
-#include <linux/blkdev.h>
-#include <linux/completion.h>
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/mempool.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/hardirq.h>
-#include <linux/scatterlist.h>
-#include <linux/blk-mq.h>
-#include <linux/ratelimit.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_driver.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_host.h>
-
-#include <trace/events/scsi.h>
-
-#include "scsi_priv.h"
-#include "scsi_logging.h"
-
-
-#define SG_MEMPOOL_NR ARRAY_SIZE(scsi_sg_pools)
-#define SG_MEMPOOL_SIZE 2
-
-struct scsi_host_sg_pool {
- size_t size;
- char *name;
- struct kmem_cache *slab;
- mempool_t *pool;
-};
-
-#define SP(x) { .size = x, "sgpool-" __stringify(x) }
-#if (SCSI_MAX_SG_SEGMENTS < 32)
-#error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
-#endif
-static struct scsi_host_sg_pool scsi_sg_pools[] = {
- SP(8),
- SP(16),
-#if (SCSI_MAX_SG_SEGMENTS > 32)
- SP(32),
-#if (SCSI_MAX_SG_SEGMENTS > 64)
- SP(64),
-#if (SCSI_MAX_SG_SEGMENTS > 128)
- SP(128),
-#if (SCSI_MAX_SG_SEGMENTS > 256)
-#error SCSI_MAX_SG_SEGMENTS is too large (256 MAX)
-#endif
-#endif
-#endif
-#endif
- SP(SCSI_MAX_SG_SEGMENTS)
-};
-#undef SP
-
-struct kmem_cache *scsi_sdb_cache;
-
-/*
- * When to reinvoke queueing after a resource shortage. It's 3 msecs to
- * not change behaviour from the previous unplug mechanism, experimentation
- * may prove this needs changing.
- */
-#define SCSI_QUEUE_DELAY 3
-
-static void
-scsi_set_blocked(struct scsi_cmnd *cmd, int reason)
-{
- struct Scsi_Host *host = cmd->device->host;
- struct scsi_device *device = cmd->device;
- struct scsi_target *starget = scsi_target(device);
-
- /*
- * Set the appropriate busy bit for the device/host.
- *
- * If the host/device isn't busy, assume that something actually
- * completed, and that we should be able to queue a command now.
- *
- * Note that the prior mid-layer assumption that any host could
- * always queue at least one command is now broken. The mid-layer
- * will implement a user specifiable stall (see
- * scsi_host.max_host_blocked and scsi_device.max_device_blocked)
- * if a command is requeued with no other commands outstanding
- * either for the device or for the host.
- */
- switch (reason) {
- case SCSI_MLQUEUE_HOST_BUSY:
- atomic_set(&host->host_blocked, host->max_host_blocked);
- break;
- case SCSI_MLQUEUE_DEVICE_BUSY:
- case SCSI_MLQUEUE_EH_RETRY:
- atomic_set(&device->device_blocked,
- device->max_device_blocked);
- break;
- case SCSI_MLQUEUE_TARGET_BUSY:
- atomic_set(&starget->target_blocked,
- starget->max_target_blocked);
- break;
- }
-}
-
-static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd)
-{
- struct scsi_device *sdev = cmd->device;
- struct request_queue *q = cmd->request->q;
-
- blk_mq_requeue_request(cmd->request);
- blk_mq_kick_requeue_list(q);
- put_device(&sdev->sdev_gendev);
-}
-
-/**
- * __scsi_queue_insert - private queue insertion
- * @cmd: The SCSI command being requeued
- * @reason: The reason for the requeue
- * @unbusy: Whether the queue should be unbusied
- *
- * This is a private queue insertion. The public interface
- * scsi_queue_insert() always assumes the queue should be unbusied
- * because it's always called before the completion. This function is
- * for a requeue after completion, which should only occur in this
- * file.
- */
-static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy)
-{
- struct scsi_device *device = cmd->device;
- struct request_queue *q = device->request_queue;
- unsigned long flags;
-
- SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd,
- "Inserting command %p into mlqueue\n", cmd));
-
- scsi_set_blocked(cmd, reason);
-
- /*
- * Decrement the counters, since these commands are no longer
- * active on the host/device.
- */
- if (unbusy)
- scsi_device_unbusy(device);
-
- /*
- * Requeue this command. It will go before all other commands
- * that are already in the queue. Schedule requeue work under
- * lock such that the kblockd_schedule_work() call happens
- * before blk_cleanup_queue() finishes.
- */
- cmd->result = 0;
- if (q->mq_ops) {
- scsi_mq_requeue_cmd(cmd);
- return;
- }
- spin_lock_irqsave(q->queue_lock, flags);
- blk_requeue_request(q, cmd->request);
- kblockd_schedule_work(&device->requeue_work);
- spin_unlock_irqrestore(q->queue_lock, flags);
-}
-
-/*
- * Function: scsi_queue_insert()
- *
- * Purpose: Insert a command in the midlevel queue.
- *
- * Arguments: cmd - command that we are adding to queue.
- * reason - why we are inserting command to queue.
- *
- * Lock status: Assumed that lock is not held upon entry.
- *
- * Returns: Nothing.
- *
- * Notes: We do this for one of two cases. Either the host is busy
- * and it cannot accept any more commands for the time being,
- * or the device returned QUEUE_FULL and can accept no more
- * commands.
- * Notes: This could be called either from an interrupt context or a
- * normal process context.
- */
-void scsi_queue_insert(struct scsi_cmnd *cmd, int reason)
-{
- __scsi_queue_insert(cmd, reason, 1);
-}
-/**
- * scsi_execute - insert request and wait for the result
- * @sdev: scsi device
- * @cmd: scsi command
- * @data_direction: data direction
- * @buffer: data buffer
- * @bufflen: len of buffer
- * @sense: optional sense buffer
- * @timeout: request timeout in seconds
- * @retries: number of times to retry request
- * @flags: or into request flags;
- * @resid: optional residual length
- *
- * returns the req->errors value which is the scsi_cmnd result
- * field.
- */
-int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
- int data_direction, void *buffer, unsigned bufflen,
- unsigned char *sense, int timeout, int retries, u64 flags,
- int *resid)
-{
- struct request *req;
- int write = (data_direction == DMA_TO_DEVICE);
- int ret = DRIVER_ERROR << 24;
-
- req = blk_get_request(sdev->request_queue, write, __GFP_WAIT);
- if (IS_ERR(req))
- return ret;
- blk_rq_set_block_pc(req);
-
- if (bufflen && blk_rq_map_kern(sdev->request_queue, req,
- buffer, bufflen, __GFP_WAIT))
- goto out;
-
- req->cmd_len = COMMAND_SIZE(cmd[0]);
- memcpy(req->cmd, cmd, req->cmd_len);
- req->sense = sense;
- req->sense_len = 0;
- req->retries = retries;
- req->timeout = timeout;
- req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT;
-
- /*
- * head injection *required* here otherwise quiesce won't work
- */
- blk_execute_rq(req->q, NULL, req, 1);
-
- /*
- * Some devices (USB mass-storage in particular) may transfer
- * garbage data together with a residue indicating that the data
- * is invalid. Prevent the garbage from being misinterpreted
- * and prevent security leaks by zeroing out the excess data.
- */
- if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen))
- memset(buffer + (bufflen - req->resid_len), 0, req->resid_len);
-
- if (resid)
- *resid = req->resid_len;
- ret = req->errors;
- out:
- blk_put_request(req);
-
- return ret;
-}
-EXPORT_SYMBOL(scsi_execute);
-
-int scsi_execute_req_flags(struct scsi_device *sdev, const unsigned char *cmd,
- int data_direction, void *buffer, unsigned bufflen,
- struct scsi_sense_hdr *sshdr, int timeout, int retries,
- int *resid, u64 flags)
-{
- char *sense = NULL;
- int result;
-
- if (sshdr) {
- sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO);
- if (!sense)
- return DRIVER_ERROR << 24;
- }
- result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen,
- sense, timeout, retries, flags, resid);
- if (sshdr)
- scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr);
-
- kfree(sense);
- return result;
-}
-EXPORT_SYMBOL(scsi_execute_req_flags);
-
-/*
- * Function: scsi_init_cmd_errh()
- *
- * Purpose: Initialize cmd fields related to error handling.
- *
- * Arguments: cmd - command that is ready to be queued.
- *
- * Notes: This function has the job of initializing a number of
- * fields related to error handling. Typically this will
- * be called once for each command, as required.
- */
-static void scsi_init_cmd_errh(struct scsi_cmnd *cmd)
-{
- cmd->serial_number = 0;
- scsi_set_resid(cmd, 0);
- memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
- if (cmd->cmd_len == 0)
- cmd->cmd_len = scsi_command_size(cmd->cmnd);
-}
-
-void scsi_device_unbusy(struct scsi_device *sdev)
-{
- struct Scsi_Host *shost = sdev->host;
- struct scsi_target *starget = scsi_target(sdev);
- unsigned long flags;
-
- atomic_dec(&shost->host_busy);
- if (starget->can_queue > 0)
- atomic_dec(&starget->target_busy);
-
- if (unlikely(scsi_host_in_recovery(shost) &&
- (shost->host_failed || shost->host_eh_scheduled))) {
- spin_lock_irqsave(shost->host_lock, flags);
- scsi_eh_wakeup(shost);
- spin_unlock_irqrestore(shost->host_lock, flags);
- }
-
- atomic_dec(&sdev->device_busy);
-}
-
-static void scsi_kick_queue(struct request_queue *q)
-{
- if (q->mq_ops)
- blk_mq_start_hw_queues(q);
- else
- blk_run_queue(q);
-}
-
-/*
- * Called for single_lun devices on IO completion. Clear starget_sdev_user,
- * and call blk_run_queue for all the scsi_devices on the target -
- * including current_sdev first.
- *
- * Called with *no* scsi locks held.
- */
-static void scsi_single_lun_run(struct scsi_device *current_sdev)
-{
- struct Scsi_Host *shost = current_sdev->host;
- struct scsi_device *sdev, *tmp;
- struct scsi_target *starget = scsi_target(current_sdev);
- unsigned long flags;
-
- spin_lock_irqsave(shost->host_lock, flags);
- starget->starget_sdev_user = NULL;
- spin_unlock_irqrestore(shost->host_lock, flags);
-
- /*
- * Call blk_run_queue for all LUNs on the target, starting with
- * current_sdev. We race with others (to set starget_sdev_user),
- * but in most cases, we will be first. Ideally, each LU on the
- * target would get some limited time or requests on the target.
- */
- scsi_kick_queue(current_sdev->request_queue);
-
- spin_lock_irqsave(shost->host_lock, flags);
- if (starget->starget_sdev_user)
- goto out;
- list_for_each_entry_safe(sdev, tmp, &starget->devices,
- same_target_siblings) {
- if (sdev == current_sdev)
- continue;
- if (scsi_device_get(sdev))
- continue;
-
- spin_unlock_irqrestore(shost->host_lock, flags);
- scsi_kick_queue(sdev->request_queue);
- spin_lock_irqsave(shost->host_lock, flags);
-
- scsi_device_put(sdev);
- }
- out:
- spin_unlock_irqrestore(shost->host_lock, flags);
-}
-
-static inline bool scsi_device_is_busy(struct scsi_device *sdev)
-{
- if (atomic_read(&sdev->device_busy) >= sdev->queue_depth)
- return true;
- if (atomic_read(&sdev->device_blocked) > 0)
- return true;
- return false;
-}
-
-static inline bool scsi_target_is_busy(struct scsi_target *starget)
-{
- if (starget->can_queue > 0) {
- if (atomic_read(&starget->target_busy) >= starget->can_queue)
- return true;
- if (atomic_read(&starget->target_blocked) > 0)
- return true;
- }
- return false;
-}
-
-static inline bool scsi_host_is_busy(struct Scsi_Host *shost)
-{
- if (shost->can_queue > 0 &&
- atomic_read(&shost->host_busy) >= shost->can_queue)
- return true;
- if (atomic_read(&shost->host_blocked) > 0)
- return true;
- if (shost->host_self_blocked)
- return true;
- return false;
-}
-
-static void scsi_starved_list_run(struct Scsi_Host *shost)
-{
- LIST_HEAD(starved_list);
- struct scsi_device *sdev;
- unsigned long flags;
-
- spin_lock_irqsave(shost->host_lock, flags);
- list_splice_init(&shost->starved_list, &starved_list);
-
- while (!list_empty(&starved_list)) {
- struct request_queue *slq;
-
- /*
- * As long as shost is accepting commands and we have
- * starved queues, call blk_run_queue. scsi_request_fn
- * drops the queue_lock and can add us back to the
- * starved_list.
- *
- * host_lock protects the starved_list and starved_entry.
- * scsi_request_fn must get the host_lock before checking
- * or modifying starved_list or starved_entry.
- */
- if (scsi_host_is_busy(shost))
- break;
-
- sdev = list_entry(starved_list.next,
- struct scsi_device, starved_entry);
- list_del_init(&sdev->starved_entry);
- if (scsi_target_is_busy(scsi_target(sdev))) {
- list_move_tail(&sdev->starved_entry,
- &shost->starved_list);
- continue;
- }
-
- /*
- * Once we drop the host lock, a racing scsi_remove_device()
- * call may remove the sdev from the starved list and destroy
- * it and the queue. Mitigate by taking a reference to the
- * queue and never touching the sdev again after we drop the
- * host lock. Note: if __scsi_remove_device() invokes
- * blk_cleanup_queue() before the queue is run from this
- * function then blk_run_queue() will return immediately since
- * blk_cleanup_queue() marks the queue with QUEUE_FLAG_DYING.
- */
- slq = sdev->request_queue;
- if (!blk_get_queue(slq))
- continue;
- spin_unlock_irqrestore(shost->host_lock, flags);
-
- scsi_kick_queue(slq);
- blk_put_queue(slq);
-
- spin_lock_irqsave(shost->host_lock, flags);
- }
- /* put any unprocessed entries back */
- list_splice(&starved_list, &shost->starved_list);
- spin_unlock_irqrestore(shost->host_lock, flags);
-}
-
-/*
- * Function: scsi_run_queue()
- *
- * Purpose: Select a proper request queue to serve next
- *
- * Arguments: q - last request's queue
- *
- * Returns: Nothing
- *
- * Notes: The previous command was completely finished, start
- * a new one if possible.
- */
-static void scsi_run_queue(struct request_queue *q)
-{
- struct scsi_device *sdev = q->queuedata;
-
- if (scsi_target(sdev)->single_lun)
- scsi_single_lun_run(sdev);
- if (!list_empty(&sdev->host->starved_list))
- scsi_starved_list_run(sdev->host);
-
- if (q->mq_ops)
- blk_mq_start_stopped_hw_queues(q, false);
- else
- blk_run_queue(q);
-}
-
-void scsi_requeue_run_queue(struct work_struct *work)
-{
- struct scsi_device *sdev;
- struct request_queue *q;
-
- sdev = container_of(work, struct scsi_device, requeue_work);
- q = sdev->request_queue;
- scsi_run_queue(q);
-}
-
-/*
- * Function: scsi_requeue_command()
- *
- * Purpose: Handle post-processing of completed commands.
- *
- * Arguments: q - queue to operate on
- * cmd - command that may need to be requeued.
- *
- * Returns: Nothing
- *
- * Notes: After command completion, there may be blocks left
- * over which weren't finished by the previous command
- * this can be for a number of reasons - the main one is
- * I/O errors in the middle of the request, in which case
- * we need to request the blocks that come after the bad
- * sector.
- * Notes: Upon return, cmd is a stale pointer.
- */
-static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd)
-{
- struct scsi_device *sdev = cmd->device;
- struct request *req = cmd->request;
- unsigned long flags;
-
- spin_lock_irqsave(q->queue_lock, flags);
- blk_unprep_request(req);
- req->special = NULL;
- scsi_put_command(cmd);
- blk_requeue_request(q, req);
- spin_unlock_irqrestore(q->queue_lock, flags);
-
- scsi_run_queue(q);
-
- put_device(&sdev->sdev_gendev);
-}
-
-void scsi_run_host_queues(struct Scsi_Host *shost)
-{
- struct scsi_device *sdev;
-
- shost_for_each_device(sdev, shost)
- scsi_run_queue(sdev->request_queue);
-}
-
-static inline unsigned int scsi_sgtable_index(unsigned short nents)
-{
- unsigned int index;
-
- BUG_ON(nents > SCSI_MAX_SG_SEGMENTS);
-
- if (nents <= 8)
- index = 0;
- else
- index = get_count_order(nents) - 3;
-
- return index;
-}
-
-static void scsi_sg_free(struct scatterlist *sgl, unsigned int nents)
-{
- struct scsi_host_sg_pool *sgp;
-
- sgp = scsi_sg_pools + scsi_sgtable_index(nents);
- mempool_free(sgl, sgp->pool);
-}
-
-static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask)
-{
- struct scsi_host_sg_pool *sgp;
-
- sgp = scsi_sg_pools + scsi_sgtable_index(nents);
- return mempool_alloc(sgp->pool, gfp_mask);
-}
-
-static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq)
-{
- if (mq && sdb->table.nents <= SCSI_MAX_SG_SEGMENTS)
- return;
- __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
-}
-
-static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
-{
- struct scatterlist *first_chunk = NULL;
- int ret;
-
- BUG_ON(!nents);
-
- if (mq) {
- if (nents <= SCSI_MAX_SG_SEGMENTS) {
- sdb->table.nents = nents;
- sg_init_table(sdb->table.sgl, sdb->table.nents);
- return 0;
- }
- first_chunk = sdb->table.sgl;
- }
-
- ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS,
- first_chunk, GFP_ATOMIC, scsi_sg_alloc);
- if (unlikely(ret))
- scsi_free_sgtable(sdb, mq);
- return ret;
-}
-
-static void scsi_uninit_cmd(struct scsi_cmnd *cmd)
-{
- if (cmd->request->cmd_type == REQ_TYPE_FS) {
- struct scsi_driver *drv = scsi_cmd_to_driver(cmd);
-
- if (drv->uninit_command)
- drv->uninit_command(cmd);
- }
-}
-
-static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd)
-{
- if (cmd->sdb.table.nents)
- scsi_free_sgtable(&cmd->sdb, true);
- if (cmd->request->next_rq && cmd->request->next_rq->special)
- scsi_free_sgtable(cmd->request->next_rq->special, true);
- if (scsi_prot_sg_count(cmd))
- scsi_free_sgtable(cmd->prot_sdb, true);
-}
-
-static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd)
-{
- struct scsi_device *sdev = cmd->device;
- struct Scsi_Host *shost = sdev->host;
- unsigned long flags;
-
- scsi_mq_free_sgtables(cmd);
- scsi_uninit_cmd(cmd);
-
- if (shost->use_cmd_list) {
- BUG_ON(list_empty(&cmd->list));
- spin_lock_irqsave(&sdev->list_lock, flags);
- list_del_init(&cmd->list);
- spin_unlock_irqrestore(&sdev->list_lock, flags);
- }
-}
-
-/*
- * Function: scsi_release_buffers()
- *
- * Purpose: Free resources allocate for a scsi_command.
- *
- * Arguments: cmd - command that we are bailing.
- *
- * Lock status: Assumed that no lock is held upon entry.
- *
- * Returns: Nothing
- *
- * Notes: In the event that an upper level driver rejects a
- * command, we must release resources allocated during
- * the __init_io() function. Primarily this would involve
- * the scatter-gather table.
- */
-static void scsi_release_buffers(struct scsi_cmnd *cmd)
-{
- if (cmd->sdb.table.nents)
- scsi_free_sgtable(&cmd->sdb, false);
-
- memset(&cmd->sdb, 0, sizeof(cmd->sdb));
-
- if (scsi_prot_sg_count(cmd))
- scsi_free_sgtable(cmd->prot_sdb, false);
-}
-
-static void scsi_release_bidi_buffers(struct scsi_cmnd *cmd)
-{
- struct scsi_data_buffer *bidi_sdb = cmd->request->next_rq->special;
-
- scsi_free_sgtable(bidi_sdb, false);
- kmem_cache_free(scsi_sdb_cache, bidi_sdb);
- cmd->request->next_rq->special = NULL;
-}
-
-static bool scsi_end_request(struct request *req, int error,
- unsigned int bytes, unsigned int bidi_bytes)
-{
- struct scsi_cmnd *cmd = req->special;
- struct scsi_device *sdev = cmd->device;
- struct request_queue *q = sdev->request_queue;
-
- if (blk_update_request(req, error, bytes))
- return true;
-
- /* Bidi request must be completed as a whole */
- if (unlikely(bidi_bytes) &&
- blk_update_request(req->next_rq, error, bidi_bytes))
- return true;
-
- if (blk_queue_add_random(q))
- add_disk_randomness(req->rq_disk);
-
- if (req->mq_ctx) {
- /*
- * In the MQ case the command gets freed by __blk_mq_end_request,
- * so we have to do all cleanup that depends on it earlier.
- *
- * We also can't kick the queues from irq context, so we
- * will have to defer it to a workqueue.
- */
- scsi_mq_uninit_cmd(cmd);
-
- __blk_mq_end_request(req, error);
-
- if (scsi_target(sdev)->single_lun ||
- !list_empty(&sdev->host->starved_list))
- kblockd_schedule_work(&sdev->requeue_work);
- else
- blk_mq_start_stopped_hw_queues(q, true);
- } else {
- unsigned long flags;
-
- if (bidi_bytes)
- scsi_release_bidi_buffers(cmd);
-
- spin_lock_irqsave(q->queue_lock, flags);
- blk_finish_request(req, error);
- spin_unlock_irqrestore(q->queue_lock, flags);
-
- scsi_release_buffers(cmd);
-
- scsi_put_command(cmd);
- scsi_run_queue(q);
- }
-
- put_device(&sdev->sdev_gendev);
- return false;
-}
-
-/**
- * __scsi_error_from_host_byte - translate SCSI error code into errno
- * @cmd: SCSI command (unused)
- * @result: scsi error code
- *
- * Translate SCSI error code into standard UNIX errno.
- * Return values:
- * -ENOLINK temporary transport failure
- * -EREMOTEIO permanent target failure, do not retry
- * -EBADE permanent nexus failure, retry on other path
- * -ENOSPC No write space available
- * -ENODATA Medium error
- * -EIO unspecified I/O error
- */
-static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
-{
- int error = 0;
-
- switch(host_byte(result)) {
- case DID_TRANSPORT_FAILFAST:
- error = -ENOLINK;
- break;
- case DID_TARGET_FAILURE:
- set_host_byte(cmd, DID_OK);
- error = -EREMOTEIO;
- break;
- case DID_NEXUS_FAILURE:
- set_host_byte(cmd, DID_OK);
- error = -EBADE;
- break;
- case DID_ALLOC_FAILURE:
- set_host_byte(cmd, DID_OK);
- error = -ENOSPC;
- break;
- case DID_MEDIUM_ERROR:
- set_host_byte(cmd, DID_OK);
- error = -ENODATA;
- break;
- default:
- error = -EIO;
- break;
- }
-
- return error;
-}
-
-/*
- * Function: scsi_io_completion()
- *
- * Purpose: Completion processing for block device I/O requests.
- *
- * Arguments: cmd - command that is finished.
- *
- * Lock status: Assumed that no lock is held upon entry.
- *
- * Returns: Nothing
- *
- * Notes: We will finish off the specified number of sectors. If we
- * are done, the command block will be released and the queue
- * function will be goosed. If we are not done then we have to
- * figure out what to do next:
- *
- * a) We can call scsi_requeue_command(). The request
- * will be unprepared and put back on the queue. Then
- * a new command will be created for it. This should
- * be used if we made forward progress, or if we want
- * to switch from READ(10) to READ(6) for example.
- *
- * b) We can call __scsi_queue_insert(). The request will
- * be put back on the queue and retried using the same
- * command as before, possibly after a delay.
- *
- * c) We can call scsi_end_request() with -EIO to fail
- * the remainder of the request.
- */
-void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
-{
- int result = cmd->result;
- struct request_queue *q = cmd->device->request_queue;
- struct request *req = cmd->request;
- int error = 0;
- struct scsi_sense_hdr sshdr;
- bool sense_valid = false;
- int sense_deferred = 0, level = 0;
- enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
- ACTION_DELAYED_RETRY} action;
- unsigned long wait_for = (cmd->allowed + 1) * req->timeout;
-
- if (result) {
- sense_valid = scsi_command_normalize_sense(cmd, &sshdr);
- if (sense_valid)
- sense_deferred = scsi_sense_is_deferred(&sshdr);
- }
-
- if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */
- if (result) {
- if (sense_valid && req->sense) {
- /*
- * SG_IO wants current and deferred errors
- */
- int len = 8 + cmd->sense_buffer[7];
-
- if (len > SCSI_SENSE_BUFFERSIZE)
- len = SCSI_SENSE_BUFFERSIZE;
- memcpy(req->sense, cmd->sense_buffer, len);
- req->sense_len = len;
- }
- if (!sense_deferred)
- error = __scsi_error_from_host_byte(cmd, result);
- }
- /*
- * __scsi_error_from_host_byte may have reset the host_byte
- */
- req->errors = cmd->result;
-
- req->resid_len = scsi_get_resid(cmd);
-
- if (scsi_bidi_cmnd(cmd)) {
- /*
- * Bidi commands Must be complete as a whole,
- * both sides at once.
- */
- req->next_rq->resid_len = scsi_in(cmd)->resid;
- if (scsi_end_request(req, 0, blk_rq_bytes(req),
- blk_rq_bytes(req->next_rq)))
- BUG();
- return;
- }
- } else if (blk_rq_bytes(req) == 0 && result && !sense_deferred) {
- /*
- * Certain non BLOCK_PC requests are commands that don't
- * actually transfer anything (FLUSH), so cannot use
- * good_bytes != blk_rq_bytes(req) as the signal for an error.
- * This sets the error explicitly for the problem case.
- */
- error = __scsi_error_from_host_byte(cmd, result);
- }
-
- /* no bidi support for !REQ_TYPE_BLOCK_PC yet */
- BUG_ON(blk_bidi_rq(req));
-
- /*
- * Next deal with any sectors which we were able to correctly
- * handle.
- */
- SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, cmd,
- "%u sectors total, %d bytes done.\n",
- blk_rq_sectors(req), good_bytes));
-
- /*
- * Recovered errors need reporting, but they're always treated
- * as success, so fiddle the result code here. For BLOCK_PC
- * we already took a copy of the original into rq->errors which
- * is what gets returned to the user
- */
- if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) {
- /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip
- * print since caller wants ATA registers. Only occurs on
- * SCSI ATA PASS_THROUGH commands when CK_COND=1
- */
- if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
- ;
- else if (!(req->cmd_flags & REQ_QUIET))
- scsi_print_sense(cmd);
- result = 0;
- /* BLOCK_PC may have set error */
- error = 0;
- }
-
- /*
- * If we finished all bytes in the request we are done now.
- */
- if (!scsi_end_request(req, error, good_bytes, 0))
- return;
-
- /*
- * Kill remainder if no retrys.
- */
- if (error && scsi_noretry_cmd(cmd)) {
- if (scsi_end_request(req, error, blk_rq_bytes(req), 0))
- BUG();
- return;
- }
-
- /*
- * If there had been no error, but we have leftover bytes in the
- * requeues just queue the command up again.
- */
- if (result == 0)
- goto requeue;
-
- error = __scsi_error_from_host_byte(cmd, result);
-
- if (host_byte(result) == DID_RESET) {
- /* Third party bus reset or reset for error recovery
- * reasons. Just retry the command and see what
- * happens.
- */
- action = ACTION_RETRY;
- } else if (sense_valid && !sense_deferred) {
- switch (sshdr.sense_key) {
- case UNIT_ATTENTION:
- if (cmd->device->removable) {
- /* Detected disc change. Set a bit
- * and quietly refuse further access.
- */
- cmd->device->changed = 1;
- action = ACTION_FAIL;
- } else {
- /* Must have been a power glitch, or a
- * bus reset. Could not have been a
- * media change, so we just retry the
- * command and see what happens.
- */
- action = ACTION_RETRY;
- }
- break;
- case ILLEGAL_REQUEST:
- /* If we had an ILLEGAL REQUEST returned, then
- * we may have performed an unsupported
- * command. The only thing this should be
- * would be a ten byte read where only a six
- * byte read was supported. Also, on a system
- * where READ CAPACITY failed, we may have
- * read past the end of the disk.
- */
- if ((cmd->device->use_10_for_rw &&
- sshdr.asc == 0x20 && sshdr.ascq == 0x00) &&
- (cmd->cmnd[0] == READ_10 ||
- cmd->cmnd[0] == WRITE_10)) {
- /* This will issue a new 6-byte command. */
- cmd->device->use_10_for_rw = 0;
- action = ACTION_REPREP;
- } else if (sshdr.asc == 0x10) /* DIX */ {
- action = ACTION_FAIL;
- error = -EILSEQ;
- /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
- } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
- action = ACTION_FAIL;
- error = -EREMOTEIO;
- } else
- action = ACTION_FAIL;
- break;
- case ABORTED_COMMAND:
- action = ACTION_FAIL;
- if (sshdr.asc == 0x10) /* DIF */
- error = -EILSEQ;
- break;
- case NOT_READY:
- /* If the device is in the process of becoming
- * ready, or has a temporary blockage, retry.
- */
- if (sshdr.asc == 0x04) {
- switch (sshdr.ascq) {
- case 0x01: /* becoming ready */
- case 0x04: /* format in progress */
- case 0x05: /* rebuild in progress */
- case 0x06: /* recalculation in progress */
- case 0x07: /* operation in progress */
- case 0x08: /* Long write in progress */
- case 0x09: /* self test in progress */
- case 0x14: /* space allocation in progress */
- action = ACTION_DELAYED_RETRY;
- break;
- default:
- action = ACTION_FAIL;
- break;
- }
- } else
- action = ACTION_FAIL;
- break;
- case VOLUME_OVERFLOW:
- /* See SSC3rXX or current. */
- action = ACTION_FAIL;
- break;
- default:
- action = ACTION_FAIL;
- break;
- }
- } else
- action = ACTION_FAIL;
-
- if (action != ACTION_FAIL &&
- time_before(cmd->jiffies_at_alloc + wait_for, jiffies))
- action = ACTION_FAIL;
-
- switch (action) {
- case ACTION_FAIL:
- /* Give up and fail the remainder of the request */
- if (!(req->cmd_flags & REQ_QUIET)) {
- static DEFINE_RATELIMIT_STATE(_rs,
- DEFAULT_RATELIMIT_INTERVAL,
- DEFAULT_RATELIMIT_BURST);
-
- if (unlikely(scsi_logging_level))
- level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
- SCSI_LOG_MLCOMPLETE_BITS);
-
- /*
- * if logging is enabled the failure will be printed
- * in scsi_log_completion(), so avoid duplicate messages
- */
- if (!level && __ratelimit(&_rs)) {
- scsi_print_result(cmd, NULL, FAILED);
- if (driver_byte(result) & DRIVER_SENSE)
- scsi_print_sense(cmd);
- scsi_print_command(cmd);
- }
- }
- if (!scsi_end_request(req, error, blk_rq_err_bytes(req), 0))
- return;
- /*FALLTHRU*/
- case ACTION_REPREP:
- requeue:
- /* Unprep the request and put it back at the head of the queue.
- * A new command will be prepared and issued.
- */
- if (q->mq_ops) {
- cmd->request->cmd_flags &= ~REQ_DONTPREP;
- scsi_mq_uninit_cmd(cmd);
- scsi_mq_requeue_cmd(cmd);
- } else {
- scsi_release_buffers(cmd);
- scsi_requeue_command(q, cmd);
- }
- break;
- case ACTION_RETRY:
- /* Retry the same command immediately */
- __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, 0);
- break;
- case ACTION_DELAYED_RETRY:
- /* Retry the same command after a delay */
- __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0);
- break;
- }
-}
-
-static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
-{
- int count;
-
- /*
- * If sg table allocation fails, requeue request later.
- */
- if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments,
- req->mq_ctx != NULL)))
- return BLKPREP_DEFER;
-
- /*
- * Next, walk the list, and fill in the addresses and sizes of
- * each segment.
- */
- count = blk_rq_map_sg(req->q, req, sdb->table.sgl);
- BUG_ON(count > sdb->table.nents);
- sdb->table.nents = count;
- sdb->length = blk_rq_bytes(req);
- return BLKPREP_OK;
-}
-
-/*
- * Function: scsi_init_io()
- *
- * Purpose: SCSI I/O initialize function.
- *
- * Arguments: cmd - Command descriptor we wish to initialize
- *
- * Returns: 0 on success
- * BLKPREP_DEFER if the failure is retryable
- * BLKPREP_KILL if the failure is fatal
- */
-int scsi_init_io(struct scsi_cmnd *cmd)
-{
- struct scsi_device *sdev = cmd->device;
- struct request *rq = cmd->request;
- bool is_mq = (rq->mq_ctx != NULL);
- int error;
-
- BUG_ON(!rq->nr_phys_segments);
-
- error = scsi_init_sgtable(rq, &cmd->sdb);
- if (error)
- goto err_exit;
-
- if (blk_bidi_rq(rq)) {
- if (!rq->q->mq_ops) {
- struct scsi_data_buffer *bidi_sdb =
- kmem_cache_zalloc(scsi_sdb_cache, GFP_ATOMIC);
- if (!bidi_sdb) {
- error = BLKPREP_DEFER;
- goto err_exit;
- }
-
- rq->next_rq->special = bidi_sdb;
- }
-
- error = scsi_init_sgtable(rq->next_rq, rq->next_rq->special);
- if (error)
- goto err_exit;
- }
-
- if (blk_integrity_rq(rq)) {
- struct scsi_data_buffer *prot_sdb = cmd->prot_sdb;
- int ivecs, count;
-
- if (prot_sdb == NULL) {
- /*
- * This can happen if someone (e.g. multipath)
- * queues a command to a device on an adapter
- * that does not support DIX.
- */
- WARN_ON_ONCE(1);
- error = BLKPREP_KILL;
- goto err_exit;
- }
-
- ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
-
- if (scsi_alloc_sgtable(prot_sdb, ivecs, is_mq)) {
- error = BLKPREP_DEFER;
- goto err_exit;
- }
-
- count = blk_rq_map_integrity_sg(rq->q, rq->bio,
- prot_sdb->table.sgl);
- BUG_ON(unlikely(count > ivecs));
- BUG_ON(unlikely(count > queue_max_integrity_segments(rq->q)));
-
- cmd->prot_sdb = prot_sdb;
- cmd->prot_sdb->table.nents = count;
- }
-
- return BLKPREP_OK;
-err_exit:
- if (is_mq) {
- scsi_mq_free_sgtables(cmd);
- } else {
- scsi_release_buffers(cmd);
- cmd->request->special = NULL;
- scsi_put_command(cmd);
- put_device(&sdev->sdev_gendev);
- }
- return error;
-}
-EXPORT_SYMBOL(scsi_init_io);
-
-static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
- struct request *req)
-{
- struct scsi_cmnd *cmd;
-
- if (!req->special) {
- /* Bail if we can't get a reference to the device */
- if (!get_device(&sdev->sdev_gendev))
- return NULL;
-
- cmd = scsi_get_command(sdev, GFP_ATOMIC);
- if (unlikely(!cmd)) {
- put_device(&sdev->sdev_gendev);
- return NULL;
- }
- req->special = cmd;
- } else {
- cmd = req->special;
- }
-
- /* pull a tag out of the request if we have one */
- cmd->tag = req->tag;
- cmd->request = req;
-
- cmd->cmnd = req->cmd;
- cmd->prot_op = SCSI_PROT_NORMAL;
-
- return cmd;
-}
-
-static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
-{
- struct scsi_cmnd *cmd = req->special;
-
- /*
- * BLOCK_PC requests may transfer data, in which case they must
- * a bio attached to them. Or they might contain a SCSI command
- * that does not transfer data, in which case they may optionally
- * submit a request without an attached bio.
- */
- if (req->bio) {
- int ret = scsi_init_io(cmd);
- if (unlikely(ret))
- return ret;
- } else {
- BUG_ON(blk_rq_bytes(req));
-
- memset(&cmd->sdb, 0, sizeof(cmd->sdb));
- }
-
- cmd->cmd_len = req->cmd_len;
- cmd->transfersize = blk_rq_bytes(req);
- cmd->allowed = req->retries;
- return BLKPREP_OK;
-}
-
-/*
- * Setup a REQ_TYPE_FS command. These are simple request from filesystems
- * that still need to be translated to SCSI CDBs from the ULD.
- */
-static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
-{
- struct scsi_cmnd *cmd = req->special;
-
- if (unlikely(sdev->scsi_dh_data && sdev->scsi_dh_data->scsi_dh
- && sdev->scsi_dh_data->scsi_dh->prep_fn)) {
- int ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req);
- if (ret != BLKPREP_OK)
- return ret;
- }
-
- memset(cmd->cmnd, 0, BLK_MAX_CDB);
- return scsi_cmd_to_driver(cmd)->init_command(cmd);
-}
-
-static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req)
-{
- struct scsi_cmnd *cmd = req->special;
-
- if (!blk_rq_bytes(req))
- cmd->sc_data_direction = DMA_NONE;
- else if (rq_data_dir(req) == WRITE)
- cmd->sc_data_direction = DMA_TO_DEVICE;
- else
- cmd->sc_data_direction = DMA_FROM_DEVICE;
-
- switch (req->cmd_type) {
- case REQ_TYPE_FS:
- return scsi_setup_fs_cmnd(sdev, req);
- case REQ_TYPE_BLOCK_PC:
- return scsi_setup_blk_pc_cmnd(sdev, req);
- default:
- return BLKPREP_KILL;
- }
-}
-
-static int
-scsi_prep_state_check(struct scsi_device *sdev, struct request *req)
-{
- int ret = BLKPREP_OK;
-
- /*
- * If the device is not in running state we will reject some
- * or all commands.
- */
- if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
- switch (sdev->sdev_state) {
- case SDEV_OFFLINE:
- case SDEV_TRANSPORT_OFFLINE:
- /*
- * If the device is offline we refuse to process any
- * commands. The device must be brought online
- * before trying any recovery commands.
- */
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to offline device\n");
- ret = BLKPREP_KILL;
- break;
- case SDEV_DEL:
- /*
- * If the device is fully deleted, we refuse to
- * process any commands as well.
- */
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to dead device\n");
- ret = BLKPREP_KILL;
- break;
- case SDEV_QUIESCE:
- case SDEV_BLOCK:
- case SDEV_CREATED_BLOCK:
- /*
- * If the devices is blocked we defer normal commands.
- */
- if (!(req->cmd_flags & REQ_PREEMPT))
- ret = BLKPREP_DEFER;
- break;
- default:
- /*
- * For any other not fully online state we only allow
- * special commands. In particular any user initiated
- * command is not allowed.
- */
- if (!(req->cmd_flags & REQ_PREEMPT))
- ret = BLKPREP_KILL;
- break;
- }
- }
- return ret;
-}
-
-static int
-scsi_prep_return(struct request_queue *q, struct request *req, int ret)
-{
- struct scsi_device *sdev = q->queuedata;
-
- switch (ret) {
- case BLKPREP_KILL:
- req->errors = DID_NO_CONNECT << 16;
- /* release the command and kill it */
- if (req->special) {
- struct scsi_cmnd *cmd = req->special;
- scsi_release_buffers(cmd);
- scsi_put_command(cmd);
- put_device(&sdev->sdev_gendev);
- req->special = NULL;
- }
- break;
- case BLKPREP_DEFER:
- /*
- * If we defer, the blk_peek_request() returns NULL, but the
- * queue must be restarted, so we schedule a callback to happen
- * shortly.
- */
- if (atomic_read(&sdev->device_busy) == 0)
- blk_delay_queue(q, SCSI_QUEUE_DELAY);
- break;
- default:
- req->cmd_flags |= REQ_DONTPREP;
- }
-
- return ret;
-}
-
-static int scsi_prep_fn(struct request_queue *q, struct request *req)
-{
- struct scsi_device *sdev = q->queuedata;
- struct scsi_cmnd *cmd;
- int ret;
-
- ret = scsi_prep_state_check(sdev, req);
- if (ret != BLKPREP_OK)
- goto out;
-
- cmd = scsi_get_cmd_from_req(sdev, req);
- if (unlikely(!cmd)) {
- ret = BLKPREP_DEFER;
- goto out;
- }
-
- ret = scsi_setup_cmnd(sdev, req);
-out:
- return scsi_prep_return(q, req, ret);
-}
-
-static void scsi_unprep_fn(struct request_queue *q, struct request *req)
-{
- scsi_uninit_cmd(req->special);
-}
-
-/*
- * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else
- * return 0.
- *
- * Called with the queue_lock held.
- */
-static inline int scsi_dev_queue_ready(struct request_queue *q,
- struct scsi_device *sdev)
-{
- unsigned int busy;
-
- busy = atomic_inc_return(&sdev->device_busy) - 1;
- if (atomic_read(&sdev->device_blocked)) {
- if (busy)
- goto out_dec;
-
- /*
- * unblock after device_blocked iterates to zero
- */
- if (atomic_dec_return(&sdev->device_blocked) > 0) {
- /*
- * For the MQ case we take care of this in the caller.
- */
- if (!q->mq_ops)
- blk_delay_queue(q, SCSI_QUEUE_DELAY);
- goto out_dec;
- }
- SCSI_LOG_MLQUEUE(3, sdev_printk(KERN_INFO, sdev,
- "unblocking device at zero depth\n"));
- }
-
- if (busy >= sdev->queue_depth)
- goto out_dec;
-
- return 1;
-out_dec:
- atomic_dec(&sdev->device_busy);
- return 0;
-}
-
-/*
- * scsi_target_queue_ready: checks if there we can send commands to target
- * @sdev: scsi device on starget to check.
- */
-static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
- struct scsi_device *sdev)
-{
- struct scsi_target *starget = scsi_target(sdev);
- unsigned int busy;
-
- if (starget->single_lun) {
- spin_lock_irq(shost->host_lock);
- if (starget->starget_sdev_user &&
- starget->starget_sdev_user != sdev) {
- spin_unlock_irq(shost->host_lock);
- return 0;
- }
- starget->starget_sdev_user = sdev;
- spin_unlock_irq(shost->host_lock);
- }
-
- if (starget->can_queue <= 0)
- return 1;
-
- busy = atomic_inc_return(&starget->target_busy) - 1;
- if (atomic_read(&starget->target_blocked) > 0) {
- if (busy)
- goto starved;
-
- /*
- * unblock after target_blocked iterates to zero
- */
- if (atomic_dec_return(&starget->target_blocked) > 0)
- goto out_dec;
-
- SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
- "unblocking target at zero depth\n"));
- }
-
- if (busy >= starget->can_queue)
- goto starved;
-
- return 1;
-
-starved:
- spin_lock_irq(shost->host_lock);
- list_move_tail(&sdev->starved_entry, &shost->starved_list);
- spin_unlock_irq(shost->host_lock);
-out_dec:
- if (starget->can_queue > 0)
- atomic_dec(&starget->target_busy);
- return 0;
-}
-
-/*
- * scsi_host_queue_ready: if we can send requests to shost, return 1 else
- * return 0. We must end up running the queue again whenever 0 is
- * returned, else IO can hang.
- */
-static inline int scsi_host_queue_ready(struct request_queue *q,
- struct Scsi_Host *shost,
- struct scsi_device *sdev)
-{
- unsigned int busy;
-
- if (scsi_host_in_recovery(shost))
- return 0;
-
- busy = atomic_inc_return(&shost->host_busy) - 1;
- if (atomic_read(&shost->host_blocked) > 0) {
- if (busy)
- goto starved;
-
- /*
- * unblock after host_blocked iterates to zero
- */
- if (atomic_dec_return(&shost->host_blocked) > 0)
- goto out_dec;
-
- SCSI_LOG_MLQUEUE(3,
- shost_printk(KERN_INFO, shost,
- "unblocking host at zero depth\n"));
- }
-
- if (shost->can_queue > 0 && busy >= shost->can_queue)
- goto starved;
- if (shost->host_self_blocked)
- goto starved;
-
- /* We're OK to process the command, so we can't be starved */
- if (!list_empty(&sdev->starved_entry)) {
- spin_lock_irq(shost->host_lock);
- if (!list_empty(&sdev->starved_entry))
- list_del_init(&sdev->starved_entry);
- spin_unlock_irq(shost->host_lock);
- }
-
- return 1;
-
-starved:
- spin_lock_irq(shost->host_lock);
- if (list_empty(&sdev->starved_entry))
- list_add_tail(&sdev->starved_entry, &shost->starved_list);
- spin_unlock_irq(shost->host_lock);
-out_dec:
- atomic_dec(&shost->host_busy);
- return 0;
-}
-
-/*
- * Busy state exporting function for request stacking drivers.
- *
- * For efficiency, no lock is taken to check the busy state of
- * shost/starget/sdev, since the returned value is not guaranteed and
- * may be changed after request stacking drivers call the function,
- * regardless of taking lock or not.
- *
- * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi
- * needs to return 'not busy'. Otherwise, request stacking drivers
- * may hold requests forever.
- */
-static int scsi_lld_busy(struct request_queue *q)
-{
- struct scsi_device *sdev = q->queuedata;
- struct Scsi_Host *shost;
-
- if (blk_queue_dying(q))
- return 0;
-
- shost = sdev->host;
-
- /*
- * Ignore host/starget busy state.
- * Since block layer does not have a concept of fairness across
- * multiple queues, congestion of host/starget needs to be handled
- * in SCSI layer.
- */
- if (scsi_host_in_recovery(shost) || scsi_device_is_busy(sdev))
- return 1;
-
- return 0;
-}
-
-/*
- * Kill a request for a dead device
- */
-static void scsi_kill_request(struct request *req, struct request_queue *q)
-{
- struct scsi_cmnd *cmd = req->special;
- struct scsi_device *sdev;
- struct scsi_target *starget;
- struct Scsi_Host *shost;
-
- blk_start_request(req);
-
- scmd_printk(KERN_INFO, cmd, "killing request\n");
-
- sdev = cmd->device;
- starget = scsi_target(sdev);
- shost = sdev->host;
- scsi_init_cmd_errh(cmd);
- cmd->result = DID_NO_CONNECT << 16;
- atomic_inc(&cmd->device->iorequest_cnt);
-
- /*
- * SCSI request completion path will do scsi_device_unbusy(),
- * bump busy counts. To bump the counters, we need to dance
- * with the locks as normal issue path does.
- */
- atomic_inc(&sdev->device_busy);
- atomic_inc(&shost->host_busy);
- if (starget->can_queue > 0)
- atomic_inc(&starget->target_busy);
-
- blk_complete_request(req);
-}
-
-static void scsi_softirq_done(struct request *rq)
-{
- struct scsi_cmnd *cmd = rq->special;
- unsigned long wait_for = (cmd->allowed + 1) * rq->timeout;
- int disposition;
-
- INIT_LIST_HEAD(&cmd->eh_entry);
-
- atomic_inc(&cmd->device->iodone_cnt);
- if (cmd->result)
- atomic_inc(&cmd->device->ioerr_cnt);
-
- disposition = scsi_decide_disposition(cmd);
- if (disposition != SUCCESS &&
- time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) {
- sdev_printk(KERN_ERR, cmd->device,
- "timing out command, waited %lus\n",
- wait_for/HZ);
- disposition = SUCCESS;
- }
-
- scsi_log_completion(cmd, disposition);
-
- switch (disposition) {
- case SUCCESS:
- scsi_finish_command(cmd);
- break;
- case NEEDS_RETRY:
- scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY);
- break;
- case ADD_TO_MLQUEUE:
- scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY);
- break;
- default:
- if (!scsi_eh_scmd_add(cmd, 0))
- scsi_finish_command(cmd);
- }
-}
-
-/**
- * scsi_dispatch_command - Dispatch a command to the low-level driver.
- * @cmd: command block we are dispatching.
- *
- * Return: nonzero return request was rejected and device's queue needs to be
- * plugged.
- */
-static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *host = cmd->device->host;
- int rtn = 0;
-
- atomic_inc(&cmd->device->iorequest_cnt);
-
- /* check if the device is still usable */
- if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
- /* in SDEV_DEL we error all commands. DID_NO_CONNECT
- * returns an immediate error upwards, and signals
- * that the device is no longer present */
- cmd->result = DID_NO_CONNECT << 16;
- goto done;
- }
-
- /* Check to see if the scsi lld made this device blocked. */
- if (unlikely(scsi_device_blocked(cmd->device))) {
- /*
- * in blocked state, the command is just put back on
- * the device queue. The suspend state has already
- * blocked the queue so future requests should not
- * occur until the device transitions out of the
- * suspend state.
- */
- SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
- "queuecommand : device blocked\n"));
- return SCSI_MLQUEUE_DEVICE_BUSY;
- }
-
- /* Store the LUN value in cmnd, if needed. */
- if (cmd->device->lun_in_cdb)
- cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
- (cmd->device->lun << 5 & 0xe0);
-
- scsi_log_send(cmd);
-
- /*
- * Before we queue this command, check if the command
- * length exceeds what the host adapter can handle.
- */
- if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
- SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
- "queuecommand : command too long. "
- "cdb_size=%d host->max_cmd_len=%d\n",
- cmd->cmd_len, cmd->device->host->max_cmd_len));
- cmd->result = (DID_ABORT << 16);
- goto done;
- }
-
- if (unlikely(host->shost_state == SHOST_DEL)) {
- cmd->result = (DID_NO_CONNECT << 16);
- goto done;
-
- }
-
- trace_scsi_dispatch_cmd_start(cmd);
- rtn = host->hostt->queuecommand(host, cmd);
- if (rtn) {
- trace_scsi_dispatch_cmd_error(cmd, rtn);
- if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
- rtn != SCSI_MLQUEUE_TARGET_BUSY)
- rtn = SCSI_MLQUEUE_HOST_BUSY;
-
- SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
- "queuecommand : request rejected\n"));
- }
-
- return rtn;
- done:
- cmd->scsi_done(cmd);
- return 0;
-}
-
-/**
- * scsi_done - Invoke completion on finished SCSI command.
- * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives
- * ownership back to SCSI Core -- i.e. the LLDD has finished with it.
- *
- * Description: This function is the mid-level's (SCSI Core) interrupt routine,
- * which regains ownership of the SCSI command (de facto) from a LLDD, and
- * calls blk_complete_request() for further processing.
- *
- * This function is interrupt context safe.
- */
-static void scsi_done(struct scsi_cmnd *cmd)
-{
- trace_scsi_dispatch_cmd_done(cmd);
- blk_complete_request(cmd->request);
-}
-
-/*
- * Function: scsi_request_fn()
- *
- * Purpose: Main strategy routine for SCSI.
- *
- * Arguments: q - Pointer to actual queue.
- *
- * Returns: Nothing
- *
- * Lock status: IO request lock assumed to be held when called.
- */
-static void scsi_request_fn(struct request_queue *q)
- __releases(q->queue_lock)
- __acquires(q->queue_lock)
-{
- struct scsi_device *sdev = q->queuedata;
- struct Scsi_Host *shost;
- struct scsi_cmnd *cmd;
- struct request *req;
-
- /*
- * To start with, we keep looping until the queue is empty, or until
- * the host is no longer able to accept any more requests.
- */
- shost = sdev->host;
- for (;;) {
- int rtn;
- /*
- * get next queueable request. We do this early to make sure
- * that the request is fully prepared even if we cannot
- * accept it.
- */
- req = blk_peek_request(q);
- if (!req)
- break;
-
- if (unlikely(!scsi_device_online(sdev))) {
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to offline device\n");
- scsi_kill_request(req, q);
- continue;
- }
-
- if (!scsi_dev_queue_ready(q, sdev))
- break;
-
- /*
- * Remove the request from the request list.
- */
- if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req)))
- blk_start_request(req);
-
- spin_unlock_irq(q->queue_lock);
- cmd = req->special;
- if (unlikely(cmd == NULL)) {
- printk(KERN_CRIT "impossible request in %s.\n"
- "please mail a stack trace to "
- "linux-scsi@vger.kernel.org\n",
- __func__);
- blk_dump_rq_flags(req, "foo");
- BUG();
- }
-
- /*
- * We hit this when the driver is using a host wide
- * tag map. For device level tag maps the queue_depth check
- * in the device ready fn would prevent us from trying
- * to allocate a tag. Since the map is a shared host resource
- * we add the dev to the starved list so it eventually gets
- * a run when a tag is freed.
- */
- if (blk_queue_tagged(q) && !(req->cmd_flags & REQ_QUEUED)) {
- spin_lock_irq(shost->host_lock);
- if (list_empty(&sdev->starved_entry))
- list_add_tail(&sdev->starved_entry,
- &shost->starved_list);
- spin_unlock_irq(shost->host_lock);
- goto not_ready;
- }
-
- if (!scsi_target_queue_ready(shost, sdev))
- goto not_ready;
-
- if (!scsi_host_queue_ready(q, shost, sdev))
- goto host_not_ready;
-
- if (sdev->simple_tags)
- cmd->flags |= SCMD_TAGGED;
- else
- cmd->flags &= ~SCMD_TAGGED;
-
- /*
- * Finally, initialize any error handling parameters, and set up
- * the timers for timeouts.
- */
- scsi_init_cmd_errh(cmd);
-
- /*
- * Dispatch the command to the low-level driver.
- */
- cmd->scsi_done = scsi_done;
- rtn = scsi_dispatch_cmd(cmd);
- if (rtn) {
- scsi_queue_insert(cmd, rtn);
- spin_lock_irq(q->queue_lock);
- goto out_delay;
- }
- spin_lock_irq(q->queue_lock);
- }
-
- return;
-
- host_not_ready:
- if (scsi_target(sdev)->can_queue > 0)
- atomic_dec(&scsi_target(sdev)->target_busy);
- not_ready:
- /*
- * lock q, handle tag, requeue req, and decrement device_busy. We
- * must return with queue_lock held.
- *
- * Decrementing device_busy without checking it is OK, as all such
- * cases (host limits or settings) should run the queue at some
- * later time.
- */
- spin_lock_irq(q->queue_lock);
- blk_requeue_request(q, req);
- atomic_dec(&sdev->device_busy);
-out_delay:
- if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev))
- blk_delay_queue(q, SCSI_QUEUE_DELAY);
-}
-
-static inline int prep_to_mq(int ret)
-{
- switch (ret) {
- case BLKPREP_OK:
- return 0;
- case BLKPREP_DEFER:
- return BLK_MQ_RQ_QUEUE_BUSY;
- default:
- return BLK_MQ_RQ_QUEUE_ERROR;
- }
-}
-
-static int scsi_mq_prep_fn(struct request *req)
-{
- struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
- struct scsi_device *sdev = req->q->queuedata;
- struct Scsi_Host *shost = sdev->host;
- unsigned char *sense_buf = cmd->sense_buffer;
- struct scatterlist *sg;
-
- memset(cmd, 0, sizeof(struct scsi_cmnd));
-
- req->special = cmd;
-
- cmd->request = req;
- cmd->device = sdev;
- cmd->sense_buffer = sense_buf;
-
- cmd->tag = req->tag;
-
- cmd->cmnd = req->cmd;
- cmd->prot_op = SCSI_PROT_NORMAL;
-
- INIT_LIST_HEAD(&cmd->list);
- INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
- cmd->jiffies_at_alloc = jiffies;
-
- if (shost->use_cmd_list) {
- spin_lock_irq(&sdev->list_lock);
- list_add_tail(&cmd->list, &sdev->cmd_list);
- spin_unlock_irq(&sdev->list_lock);
- }
-
- sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size;
- cmd->sdb.table.sgl = sg;
-
- if (scsi_host_get_prot(shost)) {
- cmd->prot_sdb = (void *)sg +
- min_t(unsigned int,
- shost->sg_tablesize, SCSI_MAX_SG_SEGMENTS) *
- sizeof(struct scatterlist);
- memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer));
-
- cmd->prot_sdb->table.sgl =
- (struct scatterlist *)(cmd->prot_sdb + 1);
- }
-
- if (blk_bidi_rq(req)) {
- struct request *next_rq = req->next_rq;
- struct scsi_data_buffer *bidi_sdb = blk_mq_rq_to_pdu(next_rq);
-
- memset(bidi_sdb, 0, sizeof(struct scsi_data_buffer));
- bidi_sdb->table.sgl =
- (struct scatterlist *)(bidi_sdb + 1);
-
- next_rq->special = bidi_sdb;
- }
-
- blk_mq_start_request(req);
-
- return scsi_setup_cmnd(sdev, req);
-}
-
-static void scsi_mq_done(struct scsi_cmnd *cmd)
-{
- trace_scsi_dispatch_cmd_done(cmd);
- blk_mq_complete_request(cmd->request);
-}
-
-static int scsi_queue_rq(struct blk_mq_hw_ctx *hctx,
- const struct blk_mq_queue_data *bd)
-{
- struct request *req = bd->rq;
- struct request_queue *q = req->q;
- struct scsi_device *sdev = q->queuedata;
- struct Scsi_Host *shost = sdev->host;
- struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req);
- int ret;
- int reason;
-
- ret = prep_to_mq(scsi_prep_state_check(sdev, req));
- if (ret)
- goto out;
-
- ret = BLK_MQ_RQ_QUEUE_BUSY;
- if (!get_device(&sdev->sdev_gendev))
- goto out;
-
- if (!scsi_dev_queue_ready(q, sdev))
- goto out_put_device;
- if (!scsi_target_queue_ready(shost, sdev))
- goto out_dec_device_busy;
- if (!scsi_host_queue_ready(q, shost, sdev))
- goto out_dec_target_busy;
-
-
- if (!(req->cmd_flags & REQ_DONTPREP)) {
- ret = prep_to_mq(scsi_mq_prep_fn(req));
- if (ret)
- goto out_dec_host_busy;
- req->cmd_flags |= REQ_DONTPREP;
- } else {
- blk_mq_start_request(req);
- }
-
- if (sdev->simple_tags)
- cmd->flags |= SCMD_TAGGED;
- else
- cmd->flags &= ~SCMD_TAGGED;
-
- scsi_init_cmd_errh(cmd);
- cmd->scsi_done = scsi_mq_done;
-
- reason = scsi_dispatch_cmd(cmd);
- if (reason) {
- scsi_set_blocked(cmd, reason);
- ret = BLK_MQ_RQ_QUEUE_BUSY;
- goto out_dec_host_busy;
- }
-
- return BLK_MQ_RQ_QUEUE_OK;
-
-out_dec_host_busy:
- atomic_dec(&shost->host_busy);
-out_dec_target_busy:
- if (scsi_target(sdev)->can_queue > 0)
- atomic_dec(&scsi_target(sdev)->target_busy);
-out_dec_device_busy:
- atomic_dec(&sdev->device_busy);
-out_put_device:
- put_device(&sdev->sdev_gendev);
-out:
- switch (ret) {
- case BLK_MQ_RQ_QUEUE_BUSY:
- blk_mq_stop_hw_queue(hctx);
- if (atomic_read(&sdev->device_busy) == 0 &&
- !scsi_device_blocked(sdev))
- blk_mq_delay_queue(hctx, SCSI_QUEUE_DELAY);
- break;
- case BLK_MQ_RQ_QUEUE_ERROR:
- /*
- * Make sure to release all allocated ressources when
- * we hit an error, as we will never see this command
- * again.
- */
- if (req->cmd_flags & REQ_DONTPREP)
- scsi_mq_uninit_cmd(cmd);
- break;
- default:
- break;
- }
- return ret;
-}
-
-static enum blk_eh_timer_return scsi_timeout(struct request *req,
- bool reserved)
-{
- if (reserved)
- return BLK_EH_RESET_TIMER;
- return scsi_times_out(req);
-}
-
-static int scsi_init_request(void *data, struct request *rq,
- unsigned int hctx_idx, unsigned int request_idx,
- unsigned int numa_node)
-{
- struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
-
- cmd->sense_buffer = kzalloc_node(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL,
- numa_node);
- if (!cmd->sense_buffer)
- return -ENOMEM;
- return 0;
-}
-
-static void scsi_exit_request(void *data, struct request *rq,
- unsigned int hctx_idx, unsigned int request_idx)
-{
- struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq);
-
- kfree(cmd->sense_buffer);
-}
-
-static u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost)
-{
- struct device *host_dev;
- u64 bounce_limit = 0xffffffff;
-
- if (shost->unchecked_isa_dma)
- return BLK_BOUNCE_ISA;
- /*
- * Platforms with virtual-DMA translation
- * hardware have no practical limit.
- */
- if (!PCI_DMA_BUS_IS_PHYS)
- return BLK_BOUNCE_ANY;
-
- host_dev = scsi_get_device(shost);
- if (host_dev && host_dev->dma_mask)
- bounce_limit = (u64)dma_max_pfn(host_dev) << PAGE_SHIFT;
-
- return bounce_limit;
-}
-
-static void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q)
-{
- struct device *dev = shost->dma_dev;
-
- /*
- * this limit is imposed by hardware restrictions
- */
- blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize,
- SCSI_MAX_SG_CHAIN_SEGMENTS));
-
- if (scsi_host_prot_dma(shost)) {
- shost->sg_prot_tablesize =
- min_not_zero(shost->sg_prot_tablesize,
- (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS);
- BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize);
- blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize);
- }
-
- blk_queue_max_hw_sectors(q, shost->max_sectors);
- blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost));
- blk_queue_segment_boundary(q, shost->dma_boundary);
- dma_set_seg_boundary(dev, shost->dma_boundary);
-
- blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
-
- if (!shost->use_clustering)
- q->limits.cluster = 0;
-
- /*
- * set a reasonable default alignment on word boundaries: the
- * host and device may alter it using
- * blk_queue_update_dma_alignment() later.
- */
- blk_queue_dma_alignment(q, 0x03);
-}
-
-struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
- request_fn_proc *request_fn)
-{
- struct request_queue *q;
-
- q = blk_init_queue(request_fn, NULL);
- if (!q)
- return NULL;
- __scsi_init_queue(shost, q);
- return q;
-}
-EXPORT_SYMBOL(__scsi_alloc_queue);
-
-struct request_queue *scsi_alloc_queue(struct scsi_device *sdev)
-{
- struct request_queue *q;
-
- q = __scsi_alloc_queue(sdev->host, scsi_request_fn);
- if (!q)
- return NULL;
-
- blk_queue_prep_rq(q, scsi_prep_fn);
- blk_queue_unprep_rq(q, scsi_unprep_fn);
- blk_queue_softirq_done(q, scsi_softirq_done);
- blk_queue_rq_timed_out(q, scsi_times_out);
- blk_queue_lld_busy(q, scsi_lld_busy);
- return q;
-}
-
-static struct blk_mq_ops scsi_mq_ops = {
- .map_queue = blk_mq_map_queue,
- .queue_rq = scsi_queue_rq,
- .complete = scsi_softirq_done,
- .timeout = scsi_timeout,
- .init_request = scsi_init_request,
- .exit_request = scsi_exit_request,
+#include <scsi/scsi_lib.h>
+
+/* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
+ * You may not alter any existing entry (although adding new ones is
+ * encouraged once assigned by ANSI/INCITS T10
+ */
+static const char *const scsi_device_types[] = {
+ "Direct-Access ",
+ "Sequential-Access",
+ "Printer ",
+ "Processor ",
+ "WORM ",
+ "CD-ROM ",
+ "Scanner ",
+ "Optical Device ",
+ "Medium Changer ",
+ "Communications ",
+ "ASC IT8 ",
+ "ASC IT8 ",
+ "RAID ",
+ "Enclosure ",
+ "Direct-Access-RBC",
+ "Optical card ",
+ "Bridge controller",
+ "Object storage ",
+ "Automation/Drive ",
+ "Security Manager ",
+ "Direct-Access-ZBC",
};
-struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev)
-{
- sdev->request_queue = blk_mq_init_queue(&sdev->host->tag_set);
- if (IS_ERR(sdev->request_queue))
- return NULL;
-
- sdev->request_queue->queuedata = sdev;
- __scsi_init_queue(sdev->host, sdev->request_queue);
- return sdev->request_queue;
-}
-
-int scsi_mq_setup_tags(struct Scsi_Host *shost)
-{
- unsigned int cmd_size, sgl_size, tbl_size;
-
- tbl_size = shost->sg_tablesize;
- if (tbl_size > SCSI_MAX_SG_SEGMENTS)
- tbl_size = SCSI_MAX_SG_SEGMENTS;
- sgl_size = tbl_size * sizeof(struct scatterlist);
- cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size;
- if (scsi_host_get_prot(shost))
- cmd_size += sizeof(struct scsi_data_buffer) + sgl_size;
-
- memset(&shost->tag_set, 0, sizeof(shost->tag_set));
- shost->tag_set.ops = &scsi_mq_ops;
- shost->tag_set.nr_hw_queues = shost->nr_hw_queues ? : 1;
- shost->tag_set.queue_depth = shost->can_queue;
- shost->tag_set.cmd_size = cmd_size;
- shost->tag_set.numa_node = NUMA_NO_NODE;
- shost->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE;
- shost->tag_set.flags |=
- BLK_ALLOC_POLICY_TO_MQ_FLAG(shost->hostt->tag_alloc_policy);
- shost->tag_set.driver_data = shost;
-
- return blk_mq_alloc_tag_set(&shost->tag_set);
-}
-
-void scsi_mq_destroy_tags(struct Scsi_Host *shost)
-{
- blk_mq_free_tag_set(&shost->tag_set);
-}
-
-/*
- * Function: scsi_block_requests()
- *
- * Purpose: Utility function used by low-level drivers to prevent further
- * commands from being queued to the device.
- *
- * Arguments: shost - Host in question
- *
- * Returns: Nothing
- *
- * Lock status: No locks are assumed held.
- *
- * Notes: There is no timer nor any other means by which the requests
- * get unblocked other than the low-level driver calling
- * scsi_unblock_requests().
- */
-void scsi_block_requests(struct Scsi_Host *shost)
-{
- shost->host_self_blocked = 1;
-}
-EXPORT_SYMBOL(scsi_block_requests);
-
-/*
- * Function: scsi_unblock_requests()
- *
- * Purpose: Utility function used by low-level drivers to allow further
- * commands from being queued to the device.
- *
- * Arguments: shost - Host in question
- *
- * Returns: Nothing
- *
- * Lock status: No locks are assumed held.
- *
- * Notes: There is no timer nor any other means by which the requests
- * get unblocked other than the low-level driver calling
- * scsi_unblock_requests().
- *
- * This is done as an API function so that changes to the
- * internals of the scsi mid-layer won't require wholesale
- * changes to drivers that use this feature.
- */
-void scsi_unblock_requests(struct Scsi_Host *shost)
-{
- shost->host_self_blocked = 0;
- scsi_run_host_queues(shost);
-}
-EXPORT_SYMBOL(scsi_unblock_requests);
-
-int __init scsi_init_queue(void)
-{
- int i;
-
- scsi_sdb_cache = kmem_cache_create("scsi_data_buffer",
- sizeof(struct scsi_data_buffer),
- 0, 0, NULL);
- if (!scsi_sdb_cache) {
- printk(KERN_ERR "SCSI: can't init scsi sdb cache\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < SG_MEMPOOL_NR; i++) {
- struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
- int size = sgp->size * sizeof(struct scatterlist);
-
- sgp->slab = kmem_cache_create(sgp->name, size, 0,
- SLAB_HWCACHE_ALIGN, NULL);
- if (!sgp->slab) {
- printk(KERN_ERR "SCSI: can't init sg slab %s\n",
- sgp->name);
- goto cleanup_sdb;
- }
-
- sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE,
- sgp->slab);
- if (!sgp->pool) {
- printk(KERN_ERR "SCSI: can't init sg mempool %s\n",
- sgp->name);
- goto cleanup_sdb;
- }
- }
-
- return 0;
-
-cleanup_sdb:
- for (i = 0; i < SG_MEMPOOL_NR; i++) {
- struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
- if (sgp->pool)
- mempool_destroy(sgp->pool);
- if (sgp->slab)
- kmem_cache_destroy(sgp->slab);
- }
- kmem_cache_destroy(scsi_sdb_cache);
-
- return -ENOMEM;
-}
-
-void scsi_exit_queue(void)
-{
- int i;
-
- kmem_cache_destroy(scsi_sdb_cache);
-
- for (i = 0; i < SG_MEMPOOL_NR; i++) {
- struct scsi_host_sg_pool *sgp = scsi_sg_pools + i;
- mempool_destroy(sgp->pool);
- kmem_cache_destroy(sgp->slab);
- }
-}
-
-/**
- * scsi_mode_select - issue a mode select
- * @sdev: SCSI device to be queried
- * @pf: Page format bit (1 == standard, 0 == vendor specific)
- * @sp: Save page bit (0 == don't save, 1 == save)
- * @modepage: mode page being requested
- * @buffer: request buffer (may not be smaller than eight bytes)
- * @len: length of request buffer.
- * @timeout: command timeout
- * @retries: number of retries before failing
- * @data: returns a structure abstracting the mode header data
- * @sshdr: place to put sense data (or NULL if no sense to be collected).
- * must be SCSI_SENSE_BUFFERSIZE big.
- *
- * Returns zero if successful; negative error number or scsi
- * status on error
- *
- */
-int
-scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage,
- unsigned char *buffer, int len, int timeout, int retries,
- struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
-{
- unsigned char cmd[10];
- unsigned char *real_buffer;
- int ret;
-
- memset(cmd, 0, sizeof(cmd));
- cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0);
-
- if (sdev->use_10_for_ms) {
- if (len > 65535)
- return -EINVAL;
- real_buffer = kmalloc(8 + len, GFP_KERNEL);
- if (!real_buffer)
- return -ENOMEM;
- memcpy(real_buffer + 8, buffer, len);
- len += 8;
- real_buffer[0] = 0;
- real_buffer[1] = 0;
- real_buffer[2] = data->medium_type;
- real_buffer[3] = data->device_specific;
- real_buffer[4] = data->longlba ? 0x01 : 0;
- real_buffer[5] = 0;
- real_buffer[6] = data->block_descriptor_length >> 8;
- real_buffer[7] = data->block_descriptor_length;
-
- cmd[0] = MODE_SELECT_10;
- cmd[7] = len >> 8;
- cmd[8] = len;
- } else {
- if (len > 255 || data->block_descriptor_length > 255 ||
- data->longlba)
- return -EINVAL;
-
- real_buffer = kmalloc(4 + len, GFP_KERNEL);
- if (!real_buffer)
- return -ENOMEM;
- memcpy(real_buffer + 4, buffer, len);
- len += 4;
- real_buffer[0] = 0;
- real_buffer[1] = data->medium_type;
- real_buffer[2] = data->device_specific;
- real_buffer[3] = data->block_descriptor_length;
-
-
- cmd[0] = MODE_SELECT;
- cmd[4] = len;
- }
-
- ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len,
- sshdr, timeout, retries, NULL);
- kfree(real_buffer);
- return ret;
-}
-EXPORT_SYMBOL_GPL(scsi_mode_select);
-
-/**
- * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
- * @sdev: SCSI device to be queried
- * @dbd: set if mode sense will allow block descriptors to be returned
- * @modepage: mode page being requested
- * @buffer: request buffer (may not be smaller than eight bytes)
- * @len: length of request buffer.
- * @timeout: command timeout
- * @retries: number of retries before failing
- * @data: returns a structure abstracting the mode header data
- * @sshdr: place to put sense data (or NULL if no sense to be collected).
- * must be SCSI_SENSE_BUFFERSIZE big.
- *
- * Returns zero if unsuccessful, or the header offset (either 4
- * or 8 depending on whether a six or ten byte command was
- * issued) if successful.
- */
-int
-scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
- unsigned char *buffer, int len, int timeout, int retries,
- struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr)
-{
- unsigned char cmd[12];
- int use_10_for_ms;
- int header_length;
- int result;
- struct scsi_sense_hdr my_sshdr;
-
- memset(data, 0, sizeof(*data));
- memset(&cmd[0], 0, 12);
- cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */
- cmd[2] = modepage;
-
- /* caller might not be interested in sense, but we need it */
- if (!sshdr)
- sshdr = &my_sshdr;
-
- retry:
- use_10_for_ms = sdev->use_10_for_ms;
-
- if (use_10_for_ms) {
- if (len < 8)
- len = 8;
-
- cmd[0] = MODE_SENSE_10;
- cmd[8] = len;
- header_length = 8;
- } else {
- if (len < 4)
- len = 4;
-
- cmd[0] = MODE_SENSE;
- cmd[4] = len;
- header_length = 4;
- }
-
- memset(buffer, 0, len);
-
- result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
- sshdr, timeout, retries, NULL);
-
- /* This code looks awful: what it's doing is making sure an
- * ILLEGAL REQUEST sense return identifies the actual command
- * byte as the problem. MODE_SENSE commands can return
- * ILLEGAL REQUEST if the code page isn't supported */
-
- if (use_10_for_ms && !scsi_status_is_good(result) &&
- (driver_byte(result) & DRIVER_SENSE)) {
- if (scsi_sense_valid(sshdr)) {
- if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
- (sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
- /*
- * Invalid command operation code
- */
- sdev->use_10_for_ms = 0;
- goto retry;
- }
- }
- }
-
- if(scsi_status_is_good(result)) {
- if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b &&
- (modepage == 6 || modepage == 8))) {
- /* Initio breakage? */
- header_length = 0;
- data->length = 13;
- data->medium_type = 0;
- data->device_specific = 0;
- data->longlba = 0;
- data->block_descriptor_length = 0;
- } else if(use_10_for_ms) {
- data->length = buffer[0]*256 + buffer[1] + 2;
- data->medium_type = buffer[2];
- data->device_specific = buffer[3];
- data->longlba = buffer[4] & 0x01;
- data->block_descriptor_length = buffer[6]*256
- + buffer[7];
- } else {
- data->length = buffer[0] + 1;
- data->medium_type = buffer[1];
- data->device_specific = buffer[2];
- data->block_descriptor_length = buffer[3];
- }
- data->header_length = header_length;
- }
-
- return result;
-}
-EXPORT_SYMBOL(scsi_mode_sense);
-
-/**
- * scsi_test_unit_ready - test if unit is ready
- * @sdev: scsi device to change the state of.
- * @timeout: command timeout
- * @retries: number of retries before failing
- * @sshdr_external: Optional pointer to struct scsi_sense_hdr for
- * returning sense. Make sure that this is cleared before passing
- * in.
- *
- * Returns zero if unsuccessful or an error if TUR failed. For
- * removable media, UNIT_ATTENTION sets ->changed flag.
- **/
-int
-scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries,
- struct scsi_sense_hdr *sshdr_external)
-{
- char cmd[] = {
- TEST_UNIT_READY, 0, 0, 0, 0, 0,
- };
- struct scsi_sense_hdr *sshdr;
- int result;
-
- if (!sshdr_external)
- sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
- else
- sshdr = sshdr_external;
-
- /* try to eat the UNIT_ATTENTION if there are enough retries */
- do {
- result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr,
- timeout, retries, NULL);
- if (sdev->removable && scsi_sense_valid(sshdr) &&
- sshdr->sense_key == UNIT_ATTENTION)
- sdev->changed = 1;
- } while (scsi_sense_valid(sshdr) &&
- sshdr->sense_key == UNIT_ATTENTION && --retries);
-
- if (!sshdr_external)
- kfree(sshdr);
- return result;
-}
-EXPORT_SYMBOL(scsi_test_unit_ready);
-
-/**
- * scsi_device_set_state - Take the given device through the device state model.
- * @sdev: scsi device to change the state of.
- * @state: state to change to.
- *
- * Returns zero if unsuccessful or an error if the requested
- * transition is illegal.
- */
-int
-scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state)
-{
- enum scsi_device_state oldstate = sdev->sdev_state;
-
- if (state == oldstate)
- return 0;
-
- switch (state) {
- case SDEV_CREATED:
- switch (oldstate) {
- case SDEV_CREATED_BLOCK:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_RUNNING:
- switch (oldstate) {
- case SDEV_CREATED:
- case SDEV_OFFLINE:
- case SDEV_TRANSPORT_OFFLINE:
- case SDEV_QUIESCE:
- case SDEV_BLOCK:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_QUIESCE:
- switch (oldstate) {
- case SDEV_RUNNING:
- case SDEV_OFFLINE:
- case SDEV_TRANSPORT_OFFLINE:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_OFFLINE:
- case SDEV_TRANSPORT_OFFLINE:
- switch (oldstate) {
- case SDEV_CREATED:
- case SDEV_RUNNING:
- case SDEV_QUIESCE:
- case SDEV_BLOCK:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_BLOCK:
- switch (oldstate) {
- case SDEV_RUNNING:
- case SDEV_CREATED_BLOCK:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_CREATED_BLOCK:
- switch (oldstate) {
- case SDEV_CREATED:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_CANCEL:
- switch (oldstate) {
- case SDEV_CREATED:
- case SDEV_RUNNING:
- case SDEV_QUIESCE:
- case SDEV_OFFLINE:
- case SDEV_TRANSPORT_OFFLINE:
- case SDEV_BLOCK:
- break;
- default:
- goto illegal;
- }
- break;
-
- case SDEV_DEL:
- switch (oldstate) {
- case SDEV_CREATED:
- case SDEV_RUNNING:
- case SDEV_OFFLINE:
- case SDEV_TRANSPORT_OFFLINE:
- case SDEV_CANCEL:
- case SDEV_CREATED_BLOCK:
- break;
- default:
- goto illegal;
- }
- break;
-
- }
- sdev->sdev_state = state;
- return 0;
-
- illegal:
- SCSI_LOG_ERROR_RECOVERY(1,
- sdev_printk(KERN_ERR, sdev,
- "Illegal state transition %s->%s",
- scsi_device_state_name(oldstate),
- scsi_device_state_name(state))
- );
- return -EINVAL;
-}
-EXPORT_SYMBOL(scsi_device_set_state);
-
-/**
- * sdev_evt_emit - emit a single SCSI device uevent
- * @sdev: associated SCSI device
- * @evt: event to emit
- *
- * Send a single uevent (scsi_event) to the associated scsi_device.
- */
-static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt)
-{
- int idx = 0;
- char *envp[3];
-
- switch (evt->evt_type) {
- case SDEV_EVT_MEDIA_CHANGE:
- envp[idx++] = "SDEV_MEDIA_CHANGE=1";
- break;
- case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
- envp[idx++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED";
- break;
- case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
- envp[idx++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED";
- break;
- case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
- envp[idx++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED";
- break;
- case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
- envp[idx++] = "SDEV_UA=MODE_PARAMETERS_CHANGED";
- break;
- case SDEV_EVT_LUN_CHANGE_REPORTED:
- envp[idx++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED";
- break;
- default:
- /* do nothing */
- break;
- }
-
- envp[idx++] = NULL;
-
- kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp);
-}
-
-/**
- * sdev_evt_thread - send a uevent for each scsi event
- * @work: work struct for scsi_device
- *
- * Dispatch queued events to their associated scsi_device kobjects
- * as uevents.
- */
-void scsi_evt_thread(struct work_struct *work)
-{
- struct scsi_device *sdev;
- enum scsi_device_event evt_type;
- LIST_HEAD(event_list);
-
- sdev = container_of(work, struct scsi_device, event_work);
-
- for (evt_type = SDEV_EVT_FIRST; evt_type <= SDEV_EVT_LAST; evt_type++)
- if (test_and_clear_bit(evt_type, sdev->pending_events))
- sdev_evt_send_simple(sdev, evt_type, GFP_KERNEL);
-
- while (1) {
- struct scsi_event *evt;
- struct list_head *this, *tmp;
- unsigned long flags;
-
- spin_lock_irqsave(&sdev->list_lock, flags);
- list_splice_init(&sdev->event_list, &event_list);
- spin_unlock_irqrestore(&sdev->list_lock, flags);
-
- if (list_empty(&event_list))
- break;
-
- list_for_each_safe(this, tmp, &event_list) {
- evt = list_entry(this, struct scsi_event, node);
- list_del(&evt->node);
- scsi_evt_emit(sdev, evt);
- kfree(evt);
- }
- }
-}
-
-/**
- * sdev_evt_send - send asserted event to uevent thread
- * @sdev: scsi_device event occurred on
- * @evt: event to send
- *
- * Assert scsi device event asynchronously.
- */
-void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt)
-{
- unsigned long flags;
-
-#if 0
- /* FIXME: currently this check eliminates all media change events
- * for polled devices. Need to update to discriminate between AN
- * and polled events */
- if (!test_bit(evt->evt_type, sdev->supported_events)) {
- kfree(evt);
- return;
- }
-#endif
-
- spin_lock_irqsave(&sdev->list_lock, flags);
- list_add_tail(&evt->node, &sdev->event_list);
- schedule_work(&sdev->event_work);
- spin_unlock_irqrestore(&sdev->list_lock, flags);
-}
-EXPORT_SYMBOL_GPL(sdev_evt_send);
-
-/**
- * sdev_evt_alloc - allocate a new scsi event
- * @evt_type: type of event to allocate
- * @gfpflags: GFP flags for allocation
- *
- * Allocates and returns a new scsi_event.
- */
-struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
- gfp_t gfpflags)
-{
- struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags);
- if (!evt)
- return NULL;
-
- evt->evt_type = evt_type;
- INIT_LIST_HEAD(&evt->node);
-
- /* evt_type-specific initialization, if any */
- switch (evt_type) {
- case SDEV_EVT_MEDIA_CHANGE:
- case SDEV_EVT_INQUIRY_CHANGE_REPORTED:
- case SDEV_EVT_CAPACITY_CHANGE_REPORTED:
- case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED:
- case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED:
- case SDEV_EVT_LUN_CHANGE_REPORTED:
- default:
- /* do nothing */
- break;
- }
-
- return evt;
-}
-EXPORT_SYMBOL_GPL(sdev_evt_alloc);
-
/**
- * sdev_evt_send_simple - send asserted event to uevent thread
- * @sdev: scsi_device event occurred on
- * @evt_type: type of event to send
- * @gfpflags: GFP flags for allocation
- *
- * Assert scsi device event asynchronously, given an event type.
+ * scsi_device_type - Return 17 char string indicating device type.
+ * @type: type number to look up
*/
-void sdev_evt_send_simple(struct scsi_device *sdev,
- enum scsi_device_event evt_type, gfp_t gfpflags)
+const char *scsi_device_type(unsigned type)
{
- struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags);
- if (!evt) {
- sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n",
- evt_type);
- return;
- }
-
- sdev_evt_send(sdev, evt);
+ if (type == 0x1e)
+ return "Well-known LUN ";
+ if (type == 0x1f)
+ return "No Device ";
+ if (type >= ARRAY_SIZE(scsi_device_types))
+ return "Unknown ";
+ return scsi_device_types[type];
}
-EXPORT_SYMBOL_GPL(sdev_evt_send_simple);
+EXPORT_SYMBOL(scsi_device_type);
/**
- * scsi_device_quiesce - Block user issued commands.
- * @sdev: scsi device to quiesce.
+ * scsilun_to_int - convert a scsi_lun to an int
+ * @scsilun: struct scsi_lun to be converted.
*
- * This works by trying to transition to the SDEV_QUIESCE state
- * (which must be a legal transition). When the device is in this
- * state, only special requests will be accepted, all others will
- * be deferred. Since special requests may also be requeued requests,
- * a successful return doesn't guarantee the device will be
- * totally quiescent.
+ * Description:
+ * Convert @scsilun from a struct scsi_lun to a four byte host byte-ordered
+ * integer, and return the result. The caller must check for
+ * truncation before using this function.
*
- * Must be called with user context, may sleep.
- *
- * Returns zero if unsuccessful or an error if not.
- */
-int
-scsi_device_quiesce(struct scsi_device *sdev)
-{
- int err = scsi_device_set_state(sdev, SDEV_QUIESCE);
- if (err)
- return err;
-
- scsi_run_queue(sdev->request_queue);
- while (atomic_read(&sdev->device_busy)) {
- msleep_interruptible(200);
- scsi_run_queue(sdev->request_queue);
- }
- return 0;
-}
-EXPORT_SYMBOL(scsi_device_quiesce);
-
-/**
- * scsi_device_resume - Restart user issued commands to a quiesced device.
- * @sdev: scsi device to resume.
+ * Notes:
+ * For a description of the LUN format, post SCSI-3 see the SCSI
+ * Architecture Model, for SCSI-3 see the SCSI Controller Commands.
*
- * Moves the device from quiesced back to running and restarts the
- * queues.
+ * Given a struct scsi_lun of: d2 04 0b 03 00 00 00 00, this function
+ * returns the integer: 0x0b03d204
*
- * Must be called with user context, may sleep.
- */
-void scsi_device_resume(struct scsi_device *sdev)
-{
- /* check if the device state was mutated prior to resume, and if
- * so assume the state is being managed elsewhere (for example
- * device deleted during suspend)
- */
- if (sdev->sdev_state != SDEV_QUIESCE ||
- scsi_device_set_state(sdev, SDEV_RUNNING))
- return;
- scsi_run_queue(sdev->request_queue);
-}
-EXPORT_SYMBOL(scsi_device_resume);
-
-static void
-device_quiesce_fn(struct scsi_device *sdev, void *data)
-{
- scsi_device_quiesce(sdev);
-}
-
-void
-scsi_target_quiesce(struct scsi_target *starget)
-{
- starget_for_each_device(starget, NULL, device_quiesce_fn);
-}
-EXPORT_SYMBOL(scsi_target_quiesce);
-
-static void
-device_resume_fn(struct scsi_device *sdev, void *data)
+ * This encoding will return a standard integer LUN for LUNs smaller
+ * than 256, which typically use a single level LUN structure with
+ * addressing method 0.
+ **/
+u64 scsilun_to_int(struct scsi_lun *scsilun)
{
- scsi_device_resume(sdev);
-}
+ int i;
+ u64 lun;
-void
-scsi_target_resume(struct scsi_target *starget)
-{
- starget_for_each_device(starget, NULL, device_resume_fn);
+ lun = 0;
+ for (i = 0; i < sizeof(lun); i += 2)
+ lun = lun | (((u64)scsilun->scsi_lun[i] << ((i + 1) * 8)) |
+ ((u64)scsilun->scsi_lun[i + 1] << (i * 8)));
+ return lun;
}
-EXPORT_SYMBOL(scsi_target_resume);
-
-/**
- * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state
- * @sdev: device to block
- *
- * Block request made by scsi lld's to temporarily stop all
- * scsi commands on the specified device. Called from interrupt
- * or normal process context.
- *
- * Returns zero if successful or error if not
- *
- * Notes:
- * This routine transitions the device to the SDEV_BLOCK state
- * (which must be a legal transition). When the device is in this
- * state, all commands are deferred until the scsi lld reenables
- * the device with scsi_device_unblock or device_block_tmo fires.
- */
-int
-scsi_internal_device_block(struct scsi_device *sdev)
-{
- struct request_queue *q = sdev->request_queue;
- unsigned long flags;
- int err = 0;
-
- err = scsi_device_set_state(sdev, SDEV_BLOCK);
- if (err) {
- err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK);
-
- if (err)
- return err;
- }
-
- /*
- * The device has transitioned to SDEV_BLOCK. Stop the
- * block layer from calling the midlayer with this device's
- * request queue.
- */
- if (q->mq_ops) {
- blk_mq_stop_hw_queues(q);
- } else {
- spin_lock_irqsave(q->queue_lock, flags);
- blk_stop_queue(q);
- spin_unlock_irqrestore(q->queue_lock, flags);
- }
+EXPORT_SYMBOL(scsilun_to_int);
- return 0;
-}
-EXPORT_SYMBOL_GPL(scsi_internal_device_block);
-
/**
- * scsi_internal_device_unblock - resume a device after a block request
- * @sdev: device to resume
- * @new_state: state to set devices to after unblocking
- *
- * Called by scsi lld's or the midlayer to restart the device queue
- * for the previously suspended scsi device. Called from interrupt or
- * normal process context.
+ * int_to_scsilun - reverts an int into a scsi_lun
+ * @lun: integer to be reverted
+ * @scsilun: struct scsi_lun to be set.
*
- * Returns zero if successful or error if not.
+ * Description:
+ * Reverts the functionality of the scsilun_to_int, which packed
+ * an 8-byte lun value into an int. This routine unpacks the int
+ * back into the lun value.
*
- * Notes:
- * This routine transitions the device to the SDEV_RUNNING state
- * or to one of the offline states (which must be a legal transition)
- * allowing the midlayer to goose the queue for this device.
- */
-int
-scsi_internal_device_unblock(struct scsi_device *sdev,
- enum scsi_device_state new_state)
-{
- struct request_queue *q = sdev->request_queue;
- unsigned long flags;
-
- /*
- * Try to transition the scsi device to SDEV_RUNNING or one of the
- * offlined states and goose the device queue if successful.
- */
- if ((sdev->sdev_state == SDEV_BLOCK) ||
- (sdev->sdev_state == SDEV_TRANSPORT_OFFLINE))
- sdev->sdev_state = new_state;
- else if (sdev->sdev_state == SDEV_CREATED_BLOCK) {
- if (new_state == SDEV_TRANSPORT_OFFLINE ||
- new_state == SDEV_OFFLINE)
- sdev->sdev_state = new_state;
- else
- sdev->sdev_state = SDEV_CREATED;
- } else if (sdev->sdev_state != SDEV_CANCEL &&
- sdev->sdev_state != SDEV_OFFLINE)
- return -EINVAL;
-
- if (q->mq_ops) {
- blk_mq_start_stopped_hw_queues(q, false);
- } else {
- spin_lock_irqsave(q->queue_lock, flags);
- blk_start_queue(q);
- spin_unlock_irqrestore(q->queue_lock, flags);
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(scsi_internal_device_unblock);
-
-static void
-device_block(struct scsi_device *sdev, void *data)
-{
- scsi_internal_device_block(sdev);
-}
-
-static int
-target_block(struct device *dev, void *data)
-{
- if (scsi_is_target_device(dev))
- starget_for_each_device(to_scsi_target(dev), NULL,
- device_block);
- return 0;
-}
-
-void
-scsi_target_block(struct device *dev)
-{
- if (scsi_is_target_device(dev))
- starget_for_each_device(to_scsi_target(dev), NULL,
- device_block);
- else
- device_for_each_child(dev, NULL, target_block);
-}
-EXPORT_SYMBOL_GPL(scsi_target_block);
-
-static void
-device_unblock(struct scsi_device *sdev, void *data)
-{
- scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data);
-}
-
-static int
-target_unblock(struct device *dev, void *data)
-{
- if (scsi_is_target_device(dev))
- starget_for_each_device(to_scsi_target(dev), data,
- device_unblock);
- return 0;
-}
-
-void
-scsi_target_unblock(struct device *dev, enum scsi_device_state new_state)
-{
- if (scsi_is_target_device(dev))
- starget_for_each_device(to_scsi_target(dev), &new_state,
- device_unblock);
- else
- device_for_each_child(dev, &new_state, target_unblock);
-}
-EXPORT_SYMBOL_GPL(scsi_target_unblock);
-
-/**
- * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt
- * @sgl: scatter-gather list
- * @sg_count: number of segments in sg
- * @offset: offset in bytes into sg, on return offset into the mapped area
- * @len: bytes to map, on return number of bytes mapped
+ * Notes:
+ * Given an integer : 0x0b03d204, this function returns a
+ * struct scsi_lun of: d2 04 0b 03 00 00 00 00
*
- * Returns virtual address of the start of the mapped page
- */
-void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count,
- size_t *offset, size_t *len)
+ **/
+void int_to_scsilun(u64 lun, struct scsi_lun *scsilun)
{
int i;
- size_t sg_len = 0, len_complete = 0;
- struct scatterlist *sg;
- struct page *page;
-
- WARN_ON(!irqs_disabled());
- for_each_sg(sgl, sg, sg_count, i) {
- len_complete = sg_len; /* Complete sg-entries */
- sg_len += sg->length;
- if (sg_len > *offset)
- break;
- }
+ memset(scsilun->scsi_lun, 0, sizeof(scsilun->scsi_lun));
- if (unlikely(i == sg_count)) {
- printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
- "elements %d\n",
- __func__, sg_len, *offset, sg_count);
- WARN_ON(1);
- return NULL;
+ for (i = 0; i < sizeof(lun); i += 2) {
+ scsilun->scsi_lun[i] = (lun >> 8) & 0xFF;
+ scsilun->scsi_lun[i+1] = lun & 0xFF;
+ lun = lun >> 16;
}
-
- /* Offset starting from the beginning of first page in this sg-entry */
- *offset = *offset - len_complete + sg->offset;
-
- /* Assumption: contiguous pages can be accessed as "page + i" */
- page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT));
- *offset &= ~PAGE_MASK;
-
- /* Bytes in this sg-entry from *offset to the end of the page */
- sg_len = PAGE_SIZE - *offset;
- if (*len > sg_len)
- *len = sg_len;
-
- return kmap_atomic(page);
-}
-EXPORT_SYMBOL(scsi_kmap_atomic_sg);
-
-/**
- * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg
- * @virt: virtual address to be unmapped
- */
-void scsi_kunmap_atomic_sg(void *virt)
-{
- kunmap_atomic(virt);
-}
-EXPORT_SYMBOL(scsi_kunmap_atomic_sg);
-
-void sdev_disable_disk_events(struct scsi_device *sdev)
-{
- atomic_inc(&sdev->disk_events_disable_depth);
-}
-EXPORT_SYMBOL(sdev_disable_disk_events);
-
-void sdev_enable_disk_events(struct scsi_device *sdev)
-{
- if (WARN_ON_ONCE(atomic_read(&sdev->disk_events_disable_depth) <= 0))
- return;
- atomic_dec(&sdev->disk_events_disable_depth);
}
-EXPORT_SYMBOL(sdev_enable_disk_events);
+EXPORT_SYMBOL(int_to_scsilun);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 9c0a520..202369b 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1263,68 +1263,6 @@ static void scsi_sequential_lun_scan(struct scsi_target *starget,
}
/**
- * scsilun_to_int - convert a scsi_lun to an int
- * @scsilun: struct scsi_lun to be converted.
- *
- * Description:
- * Convert @scsilun from a struct scsi_lun to a four byte host byte-ordered
- * integer, and return the result. The caller must check for
- * truncation before using this function.
- *
- * Notes:
- * For a description of the LUN format, post SCSI-3 see the SCSI
- * Architecture Model, for SCSI-3 see the SCSI Controller Commands.
- *
- * Given a struct scsi_lun of: d2 04 0b 03 00 00 00 00, this function
- * returns the integer: 0x0b03d204
- *
- * This encoding will return a standard integer LUN for LUNs smaller
- * than 256, which typically use a single level LUN structure with
- * addressing method 0.
- **/
-u64 scsilun_to_int(struct scsi_lun *scsilun)
-{
- int i;
- u64 lun;
-
- lun = 0;
- for (i = 0; i < sizeof(lun); i += 2)
- lun = lun | (((u64)scsilun->scsi_lun[i] << ((i + 1) * 8)) |
- ((u64)scsilun->scsi_lun[i + 1] << (i * 8)));
- return lun;
-}
-EXPORT_SYMBOL(scsilun_to_int);
-
-/**
- * int_to_scsilun - reverts an int into a scsi_lun
- * @lun: integer to be reverted
- * @scsilun: struct scsi_lun to be set.
- *
- * Description:
- * Reverts the functionality of the scsilun_to_int, which packed
- * an 8-byte lun value into an int. This routine unpacks the int
- * back into the lun value.
- *
- * Notes:
- * Given an integer : 0x0b03d204, this function returns a
- * struct scsi_lun of: d2 04 0b 03 00 00 00 00
- *
- **/
-void int_to_scsilun(u64 lun, struct scsi_lun *scsilun)
-{
- int i;
-
- memset(scsilun->scsi_lun, 0, sizeof(scsilun->scsi_lun));
-
- for (i = 0; i < sizeof(lun); i += 2) {
- scsilun->scsi_lun[i] = (lun >> 8) & 0xFF;
- scsilun->scsi_lun[i+1] = lun & 0xFF;
- lun = lun >> 16;
- }
-}
-EXPORT_SYMBOL(int_to_scsilun);
-
-/**
* scsi_report_lun_scan - Scan using SCSI REPORT LUN results
* @starget: which target
* @bflags: Zero or a mix of BLIST_NOLUN, BLIST_REPORTLUN2, or BLIST_NOREPORTLUN
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index d0a66aa..0d03476 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -1,9 +1,6 @@
/*
* This header file contains public constants and structures used by
- * the scsi code for linux.
- *
- * For documentation on the OPCODES, MESSAGES, and SENSE values,
- * please consult the SCSI standard.
+ * the SCSI initiator code.
*/
#ifndef _SCSI_SCSI_H
#define _SCSI_SCSI_H
@@ -11,6 +8,8 @@
#include <linux/types.h>
#include <linux/scatterlist.h>
#include <linux/kernel.h>
+#include <scsi/scsi_lib.h>
+#include <scsi/scsi_proto.h>
struct scsi_cmnd;
@@ -49,187 +48,6 @@ enum scsi_timeouts {
*/
#define SCAN_WILD_CARD ~0
-/*
- * SCSI opcodes
- */
-
-#define TEST_UNIT_READY 0x00
-#define REZERO_UNIT 0x01
-#define REQUEST_SENSE 0x03
-#define FORMAT_UNIT 0x04
-#define READ_BLOCK_LIMITS 0x05
-#define REASSIGN_BLOCKS 0x07
-#define INITIALIZE_ELEMENT_STATUS 0x07
-#define READ_6 0x08
-#define WRITE_6 0x0a
-#define SEEK_6 0x0b
-#define READ_REVERSE 0x0f
-#define WRITE_FILEMARKS 0x10
-#define SPACE 0x11
-#define INQUIRY 0x12
-#define RECOVER_BUFFERED_DATA 0x14
-#define MODE_SELECT 0x15
-#define RESERVE 0x16
-#define RELEASE 0x17
-#define COPY 0x18
-#define ERASE 0x19
-#define MODE_SENSE 0x1a
-#define START_STOP 0x1b
-#define RECEIVE_DIAGNOSTIC 0x1c
-#define SEND_DIAGNOSTIC 0x1d
-#define ALLOW_MEDIUM_REMOVAL 0x1e
-
-#define READ_FORMAT_CAPACITIES 0x23
-#define SET_WINDOW 0x24
-#define READ_CAPACITY 0x25
-#define READ_10 0x28
-#define WRITE_10 0x2a
-#define SEEK_10 0x2b
-#define POSITION_TO_ELEMENT 0x2b
-#define WRITE_VERIFY 0x2e
-#define VERIFY 0x2f
-#define SEARCH_HIGH 0x30
-#define SEARCH_EQUAL 0x31
-#define SEARCH_LOW 0x32
-#define SET_LIMITS 0x33
-#define PRE_FETCH 0x34
-#define READ_POSITION 0x34
-#define SYNCHRONIZE_CACHE 0x35
-#define LOCK_UNLOCK_CACHE 0x36
-#define READ_DEFECT_DATA 0x37
-#define MEDIUM_SCAN 0x38
-#define COMPARE 0x39
-#define COPY_VERIFY 0x3a
-#define WRITE_BUFFER 0x3b
-#define READ_BUFFER 0x3c
-#define UPDATE_BLOCK 0x3d
-#define READ_LONG 0x3e
-#define WRITE_LONG 0x3f
-#define CHANGE_DEFINITION 0x40
-#define WRITE_SAME 0x41
-#define UNMAP 0x42
-#define READ_TOC 0x43
-#define READ_HEADER 0x44
-#define GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define LOG_SELECT 0x4c
-#define LOG_SENSE 0x4d
-#define XDWRITEREAD_10 0x53
-#define MODE_SELECT_10 0x55
-#define RESERVE_10 0x56
-#define RELEASE_10 0x57
-#define MODE_SENSE_10 0x5a
-#define PERSISTENT_RESERVE_IN 0x5e
-#define PERSISTENT_RESERVE_OUT 0x5f
-#define VARIABLE_LENGTH_CMD 0x7f
-#define REPORT_LUNS 0xa0
-#define SECURITY_PROTOCOL_IN 0xa2
-#define MAINTENANCE_IN 0xa3
-#define MAINTENANCE_OUT 0xa4
-#define MOVE_MEDIUM 0xa5
-#define EXCHANGE_MEDIUM 0xa6
-#define READ_12 0xa8
-#define SERVICE_ACTION_OUT_12 0xa9
-#define WRITE_12 0xaa
-#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
-#define SERVICE_ACTION_IN_12 0xab
-#define WRITE_VERIFY_12 0xae
-#define VERIFY_12 0xaf
-#define SEARCH_HIGH_12 0xb0
-#define SEARCH_EQUAL_12 0xb1
-#define SEARCH_LOW_12 0xb2
-#define SECURITY_PROTOCOL_OUT 0xb5
-#define READ_ELEMENT_STATUS 0xb8
-#define SEND_VOLUME_TAG 0xb6
-#define WRITE_LONG_2 0xea
-#define EXTENDED_COPY 0x83
-#define RECEIVE_COPY_RESULTS 0x84
-#define ACCESS_CONTROL_IN 0x86
-#define ACCESS_CONTROL_OUT 0x87
-#define READ_16 0x88
-#define COMPARE_AND_WRITE 0x89
-#define WRITE_16 0x8a
-#define READ_ATTRIBUTE 0x8c
-#define WRITE_ATTRIBUTE 0x8d
-#define VERIFY_16 0x8f
-#define SYNCHRONIZE_CACHE_16 0x91
-#define WRITE_SAME_16 0x93
-#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
-#define SERVICE_ACTION_IN_16 0x9e
-#define SERVICE_ACTION_OUT_16 0x9f
-/* values for service action in */
-#define SAI_READ_CAPACITY_16 0x10
-#define SAI_GET_LBA_STATUS 0x12
-#define SAI_REPORT_REFERRALS 0x13
-/* values for VARIABLE_LENGTH_CMD service action codes
- * see spc4r17 Section D.3.5, table D.7 and D.8 */
-#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
-/* values for maintenance in */
-#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
-#define MI_REPORT_TARGET_PGS 0x0a
-#define MI_REPORT_ALIASES 0x0b
-#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
-#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
-#define MI_REPORT_PRIORITY 0x0e
-#define MI_REPORT_TIMESTAMP 0x0f
-#define MI_MANAGEMENT_PROTOCOL_IN 0x10
-/* value for MI_REPORT_TARGET_PGS ext header */
-#define MI_EXT_HDR_PARAM_FMT 0x20
-/* values for maintenance out */
-#define MO_SET_IDENTIFYING_INFORMATION 0x06
-#define MO_SET_TARGET_PGS 0x0a
-#define MO_CHANGE_ALIASES 0x0b
-#define MO_SET_PRIORITY 0x0e
-#define MO_SET_TIMESTAMP 0x0f
-#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
-/* values for variable length command */
-#define XDREAD_32 0x03
-#define XDWRITE_32 0x04
-#define XPWRITE_32 0x06
-#define XDWRITEREAD_32 0x07
-#define READ_32 0x09
-#define VERIFY_32 0x0a
-#define WRITE_32 0x0b
-#define WRITE_SAME_32 0x0d
-
-/* Values for T10/04-262r7 */
-#define ATA_16 0x85 /* 16-byte pass-thru */
-#define ATA_12 0xa1 /* 12-byte pass-thru */
-
-/* Vendor specific CDBs start here */
-#define VENDOR_SPECIFIC_CDB 0xc0
-
-/*
- * SCSI command lengths
- */
-
-#define SCSI_MAX_VARLEN_CDB_SIZE 260
-
-/* defined in T10 SCSI Primary Commands-2 (SPC2) */
-struct scsi_varlen_cdb_hdr {
- __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
- __u8 control;
- __u8 misc[5];
- __u8 additional_cdb_length; /* total cdb length - 8 */
- __be16 service_action;
- /* service specific data follows */
-};
-
-static inline unsigned
-scsi_varlen_cdb_length(const void *hdr)
-{
- return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
-}
-
-extern const unsigned char scsi_command_size_tbl[8];
-#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
-
-static inline unsigned
-scsi_command_size(const unsigned char *cmnd)
-{
- return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
- scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
-}
-
#ifdef CONFIG_ACPI
struct acpi_bus_type;
@@ -240,22 +58,6 @@ extern void
scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus);
#endif
-/*
- * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
- * T10/1561-D Revision 4 Draft dated 7th November 2002.
- */
-#define SAM_STAT_GOOD 0x00
-#define SAM_STAT_CHECK_CONDITION 0x02
-#define SAM_STAT_CONDITION_MET 0x04
-#define SAM_STAT_BUSY 0x08
-#define SAM_STAT_INTERMEDIATE 0x10
-#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
-#define SAM_STAT_RESERVATION_CONFLICT 0x18
-#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
-#define SAM_STAT_TASK_SET_FULL 0x28
-#define SAM_STAT_ACA_ACTIVE 0x30
-#define SAM_STAT_TASK_ABORTED 0x40
-
/** scsi_status_is_good - check the status return.
*
* @status: the status passed up from the driver (including host and
@@ -279,86 +81,6 @@ static inline int scsi_status_is_good(int status)
(status == SAM_STAT_COMMAND_TERMINATED));
}
-/*
- * Status codes. These are deprecated as they are shifted 1 bit right
- * from those found in the SCSI standards. This causes confusion for
- * applications that are ported to several OSes. Prefer SAM Status codes
- * above.
- */
-
-#define GOOD 0x00
-#define CHECK_CONDITION 0x01
-#define CONDITION_GOOD 0x02
-#define BUSY 0x04
-#define INTERMEDIATE_GOOD 0x08
-#define INTERMEDIATE_C_GOOD 0x0a
-#define RESERVATION_CONFLICT 0x0c
-#define COMMAND_TERMINATED 0x11
-#define QUEUE_FULL 0x14
-#define ACA_ACTIVE 0x18
-#define TASK_ABORTED 0x20
-
-#define STATUS_MASK 0xfe
-
-/*
- * SENSE KEYS
- */
-
-#define NO_SENSE 0x00
-#define RECOVERED_ERROR 0x01
-#define NOT_READY 0x02
-#define MEDIUM_ERROR 0x03
-#define HARDWARE_ERROR 0x04
-#define ILLEGAL_REQUEST 0x05
-#define UNIT_ATTENTION 0x06
-#define DATA_PROTECT 0x07
-#define BLANK_CHECK 0x08
-#define COPY_ABORTED 0x0a
-#define ABORTED_COMMAND 0x0b
-#define VOLUME_OVERFLOW 0x0d
-#define MISCOMPARE 0x0e
-
-
-/*
- * DEVICE TYPES
- * Please keep them in 0x%02x format for $MODALIAS to work
- */
-
-#define TYPE_DISK 0x00
-#define TYPE_TAPE 0x01
-#define TYPE_PRINTER 0x02
-#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
-#define TYPE_WORM 0x04 /* Treated as ROM by our system */
-#define TYPE_ROM 0x05
-#define TYPE_SCANNER 0x06
-#define TYPE_MOD 0x07 /* Magneto-optical disk -
- * - treated as TYPE_DISK */
-#define TYPE_MEDIUM_CHANGER 0x08
-#define TYPE_COMM 0x09 /* Communications device */
-#define TYPE_RAID 0x0c
-#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
-#define TYPE_RBC 0x0e
-#define TYPE_OSD 0x11
-#define TYPE_ZBC 0x14
-#define TYPE_WLUN 0x1e /* well-known logical unit */
-#define TYPE_NO_LUN 0x7f
-
-/* SCSI protocols; these are taken from SPC-3 section 7.5 */
-enum scsi_protocol {
- SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
- SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
- SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
- SCSI_PROTOCOL_SBP = 3, /* firewire */
- SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
- SCSI_PROTOCOL_ISCSI = 5,
- SCSI_PROTOCOL_SAS = 6,
- SCSI_PROTOCOL_ADT = 7, /* Media Changers */
- SCSI_PROTOCOL_ATA = 8,
- SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
-};
-
-/* Returns a human-readable name for the device */
-extern const char * scsi_device_type(unsigned type);
/*
* standard mode-select header prepended to all mode-select commands
@@ -380,13 +102,6 @@ struct ccs_modesel_head {
};
/*
- * ScsiLun: 8 byte LUN.
- */
-struct scsi_lun {
- __u8 scsi_lun[8];
-};
-
-/*
* The Well Known LUNS (SAM-3) in our int representation of a LUN
*/
#define SCSI_W_LUN_BASE 0xc100
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 9fc1aec..3416b70 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -14,23 +14,6 @@ struct scsi_driver;
#include <scsi/scsi_device.h>
-/*
- * MAX_COMMAND_SIZE is:
- * The longest fixed-length SCSI CDB as per the SCSI standard.
- * fixed-length means: commands that their size can be determined
- * by their opcode and the CDB does not carry a length specifier, (unlike
- * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
- * true and the SCSI standard also defines extended commands and
- * vendor specific commands that can be bigger than 16 bytes. The kernel
- * will support these using the same infrastructure used for VARLEN CDB's.
- * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
- * supports without specifying a cmd_len by ULD's
- */
-#define MAX_COMMAND_SIZE 16
-#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
-# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
-#endif
-
struct scsi_data_buffer {
struct sg_table table;
unsigned length;
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index a4c9336..ae84b22 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -413,8 +413,6 @@ extern void scsi_target_reap(struct scsi_target *);
extern void scsi_target_block(struct device *);
extern void scsi_target_unblock(struct device *, enum scsi_device_state);
extern void scsi_remove_target(struct device *);
-extern void int_to_scsilun(u64, struct scsi_lun *);
-extern u64 scsilun_to_int(struct scsi_lun *);
extern const char *scsi_device_state_name(enum scsi_device_state);
extern int scsi_is_sdev_device(const struct device *);
extern int scsi_is_target_device(const struct device *);
diff --git a/include/scsi/scsi_lib.h b/include/scsi/scsi_lib.h
new file mode 100644
index 0000000..239536d
--- /dev/null
+++ b/include/scsi/scsi_lib.h
@@ -0,0 +1,33 @@
+/*
+ * SCSI library functions that are useful both in initiator and in target code.
+ */
+
+#ifndef _SCSI_LIB_H_
+#define _SCSI_LIB_H_
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+static inline unsigned
+scsi_varlen_cdb_length(const void *hdr)
+{
+ return ((struct scsi_varlen_cdb_hdr *)hdr)->additional_cdb_length + 8;
+}
+
+extern const unsigned char scsi_command_size_tbl[8];
+#define COMMAND_SIZE(opcode) scsi_command_size_tbl[((opcode) >> 5) & 7]
+
+static inline unsigned
+scsi_command_size(const unsigned char *cmnd)
+{
+ return (cmnd[0] == VARIABLE_LENGTH_CMD) ?
+ scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
+}
+
+/* Returns a human-readable name for the device */
+extern const char *scsi_device_type(unsigned type);
+
+extern void int_to_scsilun(u64, struct scsi_lun *);
+extern u64 scsilun_to_int(struct scsi_lun *);
+
+#endif /* _SCSI_LIB_H_ */
diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
new file mode 100644
index 0000000..22844a0
--- /dev/null
+++ b/include/scsi/scsi_proto.h
@@ -0,0 +1,299 @@
+/*
+ * This header file contains public constants and structures used by
+ * both the SCSI initiator and the SCSI target code.
+ *
+ * For documentation on the OPCODES, MESSAGES, and SENSE values,
+ * please consult the SCSI standard.
+ */
+
+#ifndef _SCSI_PROTO_H_
+#define _SCSI_PROTO_H_
+
+#include <linux/types.h>
+#include <linux/blkdev.h> /* BLK_MAX_CDB */
+
+/*
+ * SCSI opcodes
+ */
+
+#define TEST_UNIT_READY 0x00
+#define REZERO_UNIT 0x01
+#define REQUEST_SENSE 0x03
+#define FORMAT_UNIT 0x04
+#define READ_BLOCK_LIMITS 0x05
+#define REASSIGN_BLOCKS 0x07
+#define INITIALIZE_ELEMENT_STATUS 0x07
+#define READ_6 0x08
+#define WRITE_6 0x0a
+#define SEEK_6 0x0b
+#define READ_REVERSE 0x0f
+#define WRITE_FILEMARKS 0x10
+#define SPACE 0x11
+#define INQUIRY 0x12
+#define RECOVER_BUFFERED_DATA 0x14
+#define MODE_SELECT 0x15
+#define RESERVE 0x16
+#define RELEASE 0x17
+#define COPY 0x18
+#define ERASE 0x19
+#define MODE_SENSE 0x1a
+#define START_STOP 0x1b
+#define RECEIVE_DIAGNOSTIC 0x1c
+#define SEND_DIAGNOSTIC 0x1d
+#define ALLOW_MEDIUM_REMOVAL 0x1e
+
+#define READ_FORMAT_CAPACITIES 0x23
+#define SET_WINDOW 0x24
+#define READ_CAPACITY 0x25
+#define READ_10 0x28
+#define WRITE_10 0x2a
+#define SEEK_10 0x2b
+#define POSITION_TO_ELEMENT 0x2b
+#define WRITE_VERIFY 0x2e
+#define VERIFY 0x2f
+#define SEARCH_HIGH 0x30
+#define SEARCH_EQUAL 0x31
+#define SEARCH_LOW 0x32
+#define SET_LIMITS 0x33
+#define PRE_FETCH 0x34
+#define READ_POSITION 0x34
+#define SYNCHRONIZE_CACHE 0x35
+#define LOCK_UNLOCK_CACHE 0x36
+#define READ_DEFECT_DATA 0x37
+#define MEDIUM_SCAN 0x38
+#define COMPARE 0x39
+#define COPY_VERIFY 0x3a
+#define WRITE_BUFFER 0x3b
+#define READ_BUFFER 0x3c
+#define UPDATE_BLOCK 0x3d
+#define READ_LONG 0x3e
+#define WRITE_LONG 0x3f
+#define CHANGE_DEFINITION 0x40
+#define WRITE_SAME 0x41
+#define UNMAP 0x42
+#define READ_TOC 0x43
+#define READ_HEADER 0x44
+#define GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define LOG_SELECT 0x4c
+#define LOG_SENSE 0x4d
+#define XDWRITEREAD_10 0x53
+#define MODE_SELECT_10 0x55
+#define RESERVE_10 0x56
+#define RELEASE_10 0x57
+#define MODE_SENSE_10 0x5a
+#define PERSISTENT_RESERVE_IN 0x5e
+#define PERSISTENT_RESERVE_OUT 0x5f
+#define VARIABLE_LENGTH_CMD 0x7f
+#define REPORT_LUNS 0xa0
+#define SECURITY_PROTOCOL_IN 0xa2
+#define MAINTENANCE_IN 0xa3
+#define MAINTENANCE_OUT 0xa4
+#define MOVE_MEDIUM 0xa5
+#define EXCHANGE_MEDIUM 0xa6
+#define READ_12 0xa8
+#define SERVICE_ACTION_OUT_12 0xa9
+#define WRITE_12 0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
+#define SERVICE_ACTION_IN_12 0xab
+#define WRITE_VERIFY_12 0xae
+#define VERIFY_12 0xaf
+#define SEARCH_HIGH_12 0xb0
+#define SEARCH_EQUAL_12 0xb1
+#define SEARCH_LOW_12 0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
+#define READ_ELEMENT_STATUS 0xb8
+#define SEND_VOLUME_TAG 0xb6
+#define WRITE_LONG_2 0xea
+#define EXTENDED_COPY 0x83
+#define RECEIVE_COPY_RESULTS 0x84
+#define ACCESS_CONTROL_IN 0x86
+#define ACCESS_CONTROL_OUT 0x87
+#define READ_16 0x88
+#define COMPARE_AND_WRITE 0x89
+#define WRITE_16 0x8a
+#define READ_ATTRIBUTE 0x8c
+#define WRITE_ATTRIBUTE 0x8d
+#define VERIFY_16 0x8f
+#define SYNCHRONIZE_CACHE_16 0x91
+#define WRITE_SAME_16 0x93
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
+#define SERVICE_ACTION_IN_16 0x9e
+#define SERVICE_ACTION_OUT_16 0x9f
+/* values for service action in */
+#define SAI_READ_CAPACITY_16 0x10
+#define SAI_GET_LBA_STATUS 0x12
+#define SAI_REPORT_REFERRALS 0x13
+/* values for VARIABLE_LENGTH_CMD service action codes
+ * see spc4r17 Section D.3.5, table D.7 and D.8 */
+#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
+/* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
+#define MI_REPORT_TARGET_PGS 0x0a
+#define MI_REPORT_ALIASES 0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY 0x0e
+#define MI_REPORT_TIMESTAMP 0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
+/* value for MI_REPORT_TARGET_PGS ext header */
+#define MI_EXT_HDR_PARAM_FMT 0x20
+/* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
+#define MO_SET_TARGET_PGS 0x0a
+#define MO_CHANGE_ALIASES 0x0b
+#define MO_SET_PRIORITY 0x0e
+#define MO_SET_TIMESTAMP 0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
+/* values for variable length command */
+#define XDREAD_32 0x03
+#define XDWRITE_32 0x04
+#define XPWRITE_32 0x06
+#define XDWRITEREAD_32 0x07
+#define READ_32 0x09
+#define VERIFY_32 0x0a
+#define WRITE_32 0x0b
+#define WRITE_SAME_32 0x0d
+
+/* Values for T10/04-262r7 */
+#define ATA_16 0x85 /* 16-byte pass-thru */
+#define ATA_12 0xa1 /* 12-byte pass-thru */
+
+/* Vendor specific CDBs start here */
+#define VENDOR_SPECIFIC_CDB 0xc0
+
+/*
+ * SCSI command lengths
+ */
+
+#define SCSI_MAX_VARLEN_CDB_SIZE 260
+
+/* defined in T10 SCSI Primary Commands-2 (SPC2) */
+struct scsi_varlen_cdb_hdr {
+ __u8 opcode; /* opcode always == VARIABLE_LENGTH_CMD */
+ __u8 control;
+ __u8 misc[5];
+ __u8 additional_cdb_length; /* total cdb length - 8 */
+ __be16 service_action;
+ /* service specific data follows */
+};
+
+/*
+ * MAX_COMMAND_SIZE is:
+ * The longest fixed-length SCSI CDB as per the SCSI standard.
+ * fixed-length means: commands that their size can be determined
+ * by their opcode and the CDB does not carry a length specifier, (unlike
+ * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
+ * true and the SCSI standard also defines extended commands and
+ * vendor specific commands that can be bigger than 16 bytes. The kernel
+ * will support these using the same infrastructure used for VARLEN CDB's.
+ * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
+ * supports without specifying a cmd_len by ULD's
+ */
+#define MAX_COMMAND_SIZE 16
+#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
+# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
+#endif
+
+/*
+ * SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
+ * T10/1561-D Revision 4 Draft dated 7th November 2002.
+ */
+#define SAM_STAT_GOOD 0x00
+#define SAM_STAT_CHECK_CONDITION 0x02
+#define SAM_STAT_CONDITION_MET 0x04
+#define SAM_STAT_BUSY 0x08
+#define SAM_STAT_INTERMEDIATE 0x10
+#define SAM_STAT_INTERMEDIATE_CONDITION_MET 0x14
+#define SAM_STAT_RESERVATION_CONFLICT 0x18
+#define SAM_STAT_COMMAND_TERMINATED 0x22 /* obsolete in SAM-3 */
+#define SAM_STAT_TASK_SET_FULL 0x28
+#define SAM_STAT_ACA_ACTIVE 0x30
+#define SAM_STAT_TASK_ABORTED 0x40
+
+/*
+ * Status codes. These are deprecated as they are shifted 1 bit right
+ * from those found in the SCSI standards. This causes confusion for
+ * applications that are ported to several OSes. Prefer SAM Status codes
+ * above.
+ */
+
+#define GOOD 0x00
+#define CHECK_CONDITION 0x01
+#define CONDITION_GOOD 0x02
+#define BUSY 0x04
+#define INTERMEDIATE_GOOD 0x08
+#define INTERMEDIATE_C_GOOD 0x0a
+#define RESERVATION_CONFLICT 0x0c
+#define COMMAND_TERMINATED 0x11
+#define QUEUE_FULL 0x14
+#define ACA_ACTIVE 0x18
+#define TASK_ABORTED 0x20
+
+#define STATUS_MASK 0xfe
+
+/*
+ * SENSE KEYS
+ */
+
+#define NO_SENSE 0x00
+#define RECOVERED_ERROR 0x01
+#define NOT_READY 0x02
+#define MEDIUM_ERROR 0x03
+#define HARDWARE_ERROR 0x04
+#define ILLEGAL_REQUEST 0x05
+#define UNIT_ATTENTION 0x06
+#define DATA_PROTECT 0x07
+#define BLANK_CHECK 0x08
+#define COPY_ABORTED 0x0a
+#define ABORTED_COMMAND 0x0b
+#define VOLUME_OVERFLOW 0x0d
+#define MISCOMPARE 0x0e
+
+
+/*
+ * DEVICE TYPES
+ * Please keep them in 0x%02x format for $MODALIAS to work
+ */
+
+#define TYPE_DISK 0x00
+#define TYPE_TAPE 0x01
+#define TYPE_PRINTER 0x02
+#define TYPE_PROCESSOR 0x03 /* HP scanners use this */
+#define TYPE_WORM 0x04 /* Treated as ROM by our system */
+#define TYPE_ROM 0x05
+#define TYPE_SCANNER 0x06
+#define TYPE_MOD 0x07 /* Magneto-optical disk -
+ * - treated as TYPE_DISK */
+#define TYPE_MEDIUM_CHANGER 0x08
+#define TYPE_COMM 0x09 /* Communications device */
+#define TYPE_RAID 0x0c
+#define TYPE_ENCLOSURE 0x0d /* Enclosure Services Device */
+#define TYPE_RBC 0x0e
+#define TYPE_OSD 0x11
+#define TYPE_ZBC 0x14
+#define TYPE_WLUN 0x1e /* well-known logical unit */
+#define TYPE_NO_LUN 0x7f
+
+/* SCSI protocols; these are taken from SPC-3 section 7.5 */
+enum scsi_protocol {
+ SCSI_PROTOCOL_FCP = 0, /* Fibre Channel */
+ SCSI_PROTOCOL_SPI = 1, /* parallel SCSI */
+ SCSI_PROTOCOL_SSA = 2, /* Serial Storage Architecture - Obsolete */
+ SCSI_PROTOCOL_SBP = 3, /* firewire */
+ SCSI_PROTOCOL_SRP = 4, /* Infiniband RDMA */
+ SCSI_PROTOCOL_ISCSI = 5,
+ SCSI_PROTOCOL_SAS = 6,
+ SCSI_PROTOCOL_ADT = 7, /* Media Changers */
+ SCSI_PROTOCOL_ATA = 8,
+ SCSI_PROTOCOL_UNSPEC = 0xf, /* No specific protocol */
+};
+
+/*
+ * ScsiLun: 8 byte LUN.
+ */
+struct scsi_lun {
+ __u8 scsi_lun[8];
+};
+
+
+#endif /* _SCSI_PROTO_H_ */
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index 672150b..ce71e7f 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -19,9 +19,8 @@
/*
* By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
*
- * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
- * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
- * 16-byte CDBs by default and require an extra allocation for
+ * Note that both MAX_COMMAND_SIZE and BLOCK_MAX_CDB as of v4.0-rc1 still
+ * use 16-byte CDBs by default and require an extra allocation for
* 32-byte CDBs to because of legacy issues.
*
* Within TCM Core there are no such legacy limitiations, so we go ahead
--
2.1.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] Split SCSI header files
2015-04-05 18:12 [PATCH v2] Split SCSI header files Bart Van Assche
@ 2015-04-06 15:08 ` Christoph Hellwig
2015-04-07 9:11 ` Bart Van Assche
0 siblings, 1 reply; 3+ messages in thread
From: Christoph Hellwig @ 2015-04-06 15:08 UTC (permalink / raw)
To: Bart Van Assche
Cc: James E.J. Bottomley, Nicholas A. Bellinger, Christoph Hellwig,
Hannes Reinecke, linux-scsi
On Sun, Apr 05, 2015 at 08:12:16PM +0200, Bart Van Assche wrote:
> Move the constants that are used by both initiator and target
> drivers into the new header file <scsi/scsi_proto.h>.
This part looks mostly good, and I would prefer this to be a patch on
it's own. One little nitpick below.
> Move the
> functions that are used by both subsystems into <scsi/scsi_lib.h>.
> Rename drivers/scsi/scsi_lib.c into scsi_ini_lib.c. This change
> will allow to modify the SCSI target code such that the initiator
> SCSI header files are no longer included. Note: the SCSI target
> driver patch is available for review at
I don't really like renaming the file that has most of the initiator side
SCSI code that way. If we really have to rename it in some way I'd suggest
just merging it into scsi.c as we call forth and back between the two all
the time.
Maybe we can use scsi_common.c/h/.ko to avoid these moves, although I'd
prefer to just duplicate this tiny amount of code.
> +/*
> + * MAX_COMMAND_SIZE is:
> + * The longest fixed-length SCSI CDB as per the SCSI standard.
> + * fixed-length means: commands that their size can be determined
> + * by their opcode and the CDB does not carry a length specifier, (unlike
> + * the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
> + * true and the SCSI standard also defines extended commands and
> + * vendor specific commands that can be bigger than 16 bytes. The kernel
> + * will support these using the same infrastructure used for VARLEN CDB's.
> + * So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
> + * supports without specifying a cmd_len by ULD's
> + */
> +#define MAX_COMMAND_SIZE 16
> +#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
> +# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
> +#endif
This clearly is a limitation of the Linux SCSI initiator, so having it
in the _proto.h header seems like a bad idea. For now I'd suggest to
keep it where it is, but an additional patch to remove MAX_COMMAND_SIZE
and use BLK_MAX_CDB everywhere would be even better.
> @@ -19,9 +19,8 @@
> /*
> * By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
> *
> - * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
> - * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
> - * 16-byte CDBs by default and require an extra allocation for
> + * Note that both MAX_COMMAND_SIZE and BLOCK_MAX_CDB as of v4.0-rc1 still
> + * use 16-byte CDBs by default and require an extra allocation for
> * 32-byte CDBs to because of legacy issues.
This comment is incorrect. There aren't any legacy issues, we just decided
to handle > 16 byte CDBs in the slow path. I'd suggest you remove this
sentence (and the next one) entirely instead of trying to fix it up.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] Split SCSI header files
2015-04-06 15:08 ` Christoph Hellwig
@ 2015-04-07 9:11 ` Bart Van Assche
0 siblings, 0 replies; 3+ messages in thread
From: Bart Van Assche @ 2015-04-07 9:11 UTC (permalink / raw)
To: Christoph Hellwig
Cc: James E.J. Bottomley, Nicholas A. Bellinger, Hannes Reinecke, linux-scsi
On 04/06/15 17:08, Christoph Hellwig wrote:
> On Sun, Apr 05, 2015 at 08:12:16PM +0200, Bart Van Assche wrote:
>> Move the
>> functions that are used by both subsystems into <scsi/scsi_lib.h>.
>> Rename drivers/scsi/scsi_lib.c into scsi_ini_lib.c. This change
>> will allow to modify the SCSI target code such that the initiator
>> SCSI header files are no longer included. Note: the SCSI target
>> driver patch is available for review at
>
> I don't really like renaming the file that has most of the initiator side
> SCSI code that way. If we really have to rename it in some way I'd suggest
> just merging it into scsi.c as we call forth and back between the two all
> the time.
>
> Maybe we can use scsi_common.c/h/.ko to avoid these moves, although I'd
> prefer to just duplicate this tiny amount of code.
Hello Christoph,
Sorry but duplicating code is not really something that makes me
enthusiast ... But I will address all your other comments, including
using the names scsi_common.c/.h.
Bart.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-04-07 9:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-05 18:12 [PATCH v2] Split SCSI header files Bart Van Assche
2015-04-06 15:08 ` Christoph Hellwig
2015-04-07 9:11 ` Bart Van Assche
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.