* [PATCH v4 00/32] HiSilicon SAS driver
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This is the driver patchset for the HiSilicon SAS driver. The driver
is a platform driver.
The driver will support multiple revisions of HW. Currently only "v1"
HW is supported.
The driver uses libsas framework within the SCSI framework.
The v1 HW supports SSP and SMP, but not STP/SATA.
Differences to v3:
- update dt bindings for syscon property
- change SAS and SCSI deregister order
- remove unused phy struct elements
Differences to v2:
- update device tree bindings
- remove while loops when evaluating hba struct
- remove _lo and _hi DMA struct fields
- revised spinlock usage
- fix error handling for when CMPLT_HDR_ERR_RCRD_XFRD set
- general coding style and cosmetic fixes
Differences to v1:
- re-arch driver into main module and hw-specific driver module
- allocate hisi_hba in scsi_host_alloc
- use of_irq_count get irq count - depends on [1]
- use syscon to handle ctrl reg access
- get SAS address from device tree
- do not set cmd_per_lun to 1
- remove remove controller id
- use static wq in phy struct
- process control phy in caller context
- fix port->port_attached issue for rmmod
[1] http://www.spinics.net/lists/arm-kernel/msg452833.html
John Garry (32):
[SCSI] sas: centralise ssp frame information units
devicetree: bindings: scsi: HiSi SAS
scsi: hisi_sas: add initial bare main driver
scsi: hisi_sas: add scsi host registration
scsi: hisi_sas: scan device tree
scsi: hisi_sas: add HW DMA structures
scsi: hisi_sas: allocate memories and create pools
scsi: hisi_sas: add hisi_sas_remove
scsi: hisi_sas: add slot init code
scsi: hisi_sas: add cq structure initialization
scsi: hisi_sas: add phy SAS ADDR initialization
scsi: hisi_sas: set dev DMA mask
scsi: hisi_sas: add hisi_hba workqueue
scsi: hisi_sas: add hisi sas device type
scsi: hisi_sas: add phy and port init
scsi: hisi_sas: add timer and spinlock init
scsi: hisi_sas: add v1 hw module init
scsi: hisi_sas: add v1 hardware register definitions
scsi: hisi_sas: add v1 HW initialisation code
scsi: hisi_sas: add v1 hw interrupt init
scsi: hisi_sas: add path from phyup irq to SAS framework
scsi: hisi_sas: add ssp command function
scsi: hisi_sas: add cq interrupt handler
scsi: hisi_sas: add dev_found and dev_gone
scsi: hisi_sas: add abnormal irq handler
scsi: hisi_sas: add bcast interrupt handler
scsi: hisi_sas: add smp protocol support
scsi: hisi_sas: add scan finished and start
scsi: hisi_sas: add tmf methods
scsi: hisi_sas: add control phy handler
scsi: hisi_sas: add fatal irq handler
MAINTAINERS: add maintainer for HiSi SAS driver
.../devicetree/bindings/scsi/hisilicon-sas.txt | 69 +
MAINTAINERS | 7 +
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/aic94xx/aic94xx_sas.h | 49 +-
drivers/scsi/hisi_sas/Kconfig | 6 +
drivers/scsi/hisi_sas/Makefile | 2 +
drivers/scsi/hisi_sas/hisi_sas.h | 345 ++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 1362 ++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1866 ++++++++++++++++++++
include/scsi/sas.h | 74 +
11 files changed, 3739 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
create mode 100644 drivers/scsi/hisi_sas/Kconfig
create mode 100644 drivers/scsi/hisi_sas/Makefile
create mode 100644 drivers/scsi/hisi_sas/hisi_sas.h
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_main.c
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
--
1.9.1
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCH v4 00/32] HiSilicon SAS driver
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This is the driver patchset for the HiSilicon SAS driver. The driver
is a platform driver.
The driver will support multiple revisions of HW. Currently only "v1"
HW is supported.
The driver uses libsas framework within the SCSI framework.
The v1 HW supports SSP and SMP, but not STP/SATA.
Differences to v3:
- update dt bindings for syscon property
- change SAS and SCSI deregister order
- remove unused phy struct elements
Differences to v2:
- update device tree bindings
- remove while loops when evaluating hba struct
- remove _lo and _hi DMA struct fields
- revised spinlock usage
- fix error handling for when CMPLT_HDR_ERR_RCRD_XFRD set
- general coding style and cosmetic fixes
Differences to v1:
- re-arch driver into main module and hw-specific driver module
- allocate hisi_hba in scsi_host_alloc
- use of_irq_count get irq count - depends on [1]
- use syscon to handle ctrl reg access
- get SAS address from device tree
- do not set cmd_per_lun to 1
- remove remove controller id
- use static wq in phy struct
- process control phy in caller context
- fix port->port_attached issue for rmmod
[1] http://www.spinics.net/lists/arm-kernel/msg452833.html
John Garry (32):
[SCSI] sas: centralise ssp frame information units
devicetree: bindings: scsi: HiSi SAS
scsi: hisi_sas: add initial bare main driver
scsi: hisi_sas: add scsi host registration
scsi: hisi_sas: scan device tree
scsi: hisi_sas: add HW DMA structures
scsi: hisi_sas: allocate memories and create pools
scsi: hisi_sas: add hisi_sas_remove
scsi: hisi_sas: add slot init code
scsi: hisi_sas: add cq structure initialization
scsi: hisi_sas: add phy SAS ADDR initialization
scsi: hisi_sas: set dev DMA mask
scsi: hisi_sas: add hisi_hba workqueue
scsi: hisi_sas: add hisi sas device type
scsi: hisi_sas: add phy and port init
scsi: hisi_sas: add timer and spinlock init
scsi: hisi_sas: add v1 hw module init
scsi: hisi_sas: add v1 hardware register definitions
scsi: hisi_sas: add v1 HW initialisation code
scsi: hisi_sas: add v1 hw interrupt init
scsi: hisi_sas: add path from phyup irq to SAS framework
scsi: hisi_sas: add ssp command function
scsi: hisi_sas: add cq interrupt handler
scsi: hisi_sas: add dev_found and dev_gone
scsi: hisi_sas: add abnormal irq handler
scsi: hisi_sas: add bcast interrupt handler
scsi: hisi_sas: add smp protocol support
scsi: hisi_sas: add scan finished and start
scsi: hisi_sas: add tmf methods
scsi: hisi_sas: add control phy handler
scsi: hisi_sas: add fatal irq handler
MAINTAINERS: add maintainer for HiSi SAS driver
.../devicetree/bindings/scsi/hisilicon-sas.txt | 69 +
MAINTAINERS | 7 +
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/aic94xx/aic94xx_sas.h | 49 +-
drivers/scsi/hisi_sas/Kconfig | 6 +
drivers/scsi/hisi_sas/Makefile | 2 +
drivers/scsi/hisi_sas/hisi_sas.h | 345 ++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 1362 ++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 1866 ++++++++++++++++++++
include/scsi/sas.h | 74 +
11 files changed, 3739 insertions(+), 43 deletions(-)
create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
create mode 100644 drivers/scsi/hisi_sas/Kconfig
create mode 100644 drivers/scsi/hisi_sas/Makefile
create mode 100644 drivers/scsi/hisi_sas/hisi_sas.h
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_main.c
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
--
1.9.1
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
The xfer_rdy, command, and task frame's iu structures
are not available in <scsi/sas.h>, but only aic94xx
driver folder.
Add them to include/scsi/sas.h
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/aic94xx/aic94xx_sas.h | 49 ++++---------------------
include/scsi/sas.h | 74 ++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+), 43 deletions(-)
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
index 912e6b7..101072c 100644
--- a/drivers/scsi/aic94xx/aic94xx_sas.h
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -327,46 +327,9 @@ struct scb_header {
#define LUN_SIZE 8
-/* See SAS spec, task IU
- */
-struct ssp_task_iu {
- u8 lun[LUN_SIZE]; /* BE */
- u16 _r_a;
- u8 tmf;
- u8 _r_b;
- __be16 tag; /* BE */
- u8 _r_c[14];
-} __attribute__ ((packed));
-
-/* See SAS spec, command IU
- */
-struct ssp_command_iu {
- u8 lun[LUN_SIZE];
- u8 _r_a;
- u8 efb_prio_attr; /* enable first burst, task prio & attr */
-#define EFB_MASK 0x80
-#define TASK_PRIO_MASK 0x78
-#define TASK_ATTR_MASK 0x07
-
- u8 _r_b;
- u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
- union {
- u8 cdb[16];
- struct {
- __le64 long_cdb_addr; /* bus address, LE */
- __le32 long_cdb_size; /* LE */
- u8 _r_c[3];
- u8 eol_ds; /* eol:6,6, ds:5,4 */
- } long_cdb; /* sequencer extension */
- };
-} __attribute__ ((packed));
-
-struct xfer_rdy_iu {
- __be32 requested_offset; /* BE */
- __be32 write_data_len; /* BE */
- __be32 _r_a;
-} __attribute__ ((packed));
-
+#define EFB_MASK 0x80
+#define TASK_PRIO_MASK 0x78
+#define TASK_ATTR_MASK 0x07
/* ---------- SCB tasks ---------- */
/* This is both ssp_task and long_ssp_task
@@ -511,7 +474,7 @@ struct abort_task {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
@@ -549,7 +512,7 @@ struct clear_nexus {
u8 _r_b[3];
u8 conn_mask;
u8 _r_c[19];
- struct ssp_task_iu ssp_task; /* LUN and TAG */
+ struct ssp_tmf_iu ssp_task; /* LUN and TAG */
__le16 _r_d;
__le16 conn_handle;
__le64 _r_e;
@@ -562,7 +525,7 @@ struct initiate_ssp_tmf {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* itnl override and suspend data tx */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 0d2607d..42a84ef 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -344,6 +344,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 attr:3;
+ u8 prio:4;
+ u8 efb:1;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 _r_c:2;
+ u8 add_cdb_len:6;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
@@ -538,6 +575,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 efb:1;
+ u8 prio:4;
+ u8 attr:3;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 add_cdb_len:6;
+ u8 _r_c:2;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
The xfer_rdy, command, and task frame's iu structures
are not available in <scsi/sas.h>, but only aic94xx
driver folder.
Add them to include/scsi/sas.h
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/aic94xx/aic94xx_sas.h | 49 ++++---------------------
include/scsi/sas.h | 74 ++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+), 43 deletions(-)
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
index 912e6b7..101072c 100644
--- a/drivers/scsi/aic94xx/aic94xx_sas.h
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -327,46 +327,9 @@ struct scb_header {
#define LUN_SIZE 8
-/* See SAS spec, task IU
- */
-struct ssp_task_iu {
- u8 lun[LUN_SIZE]; /* BE */
- u16 _r_a;
- u8 tmf;
- u8 _r_b;
- __be16 tag; /* BE */
- u8 _r_c[14];
-} __attribute__ ((packed));
-
-/* See SAS spec, command IU
- */
-struct ssp_command_iu {
- u8 lun[LUN_SIZE];
- u8 _r_a;
- u8 efb_prio_attr; /* enable first burst, task prio & attr */
-#define EFB_MASK 0x80
-#define TASK_PRIO_MASK 0x78
-#define TASK_ATTR_MASK 0x07
-
- u8 _r_b;
- u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
- union {
- u8 cdb[16];
- struct {
- __le64 long_cdb_addr; /* bus address, LE */
- __le32 long_cdb_size; /* LE */
- u8 _r_c[3];
- u8 eol_ds; /* eol:6,6, ds:5,4 */
- } long_cdb; /* sequencer extension */
- };
-} __attribute__ ((packed));
-
-struct xfer_rdy_iu {
- __be32 requested_offset; /* BE */
- __be32 write_data_len; /* BE */
- __be32 _r_a;
-} __attribute__ ((packed));
-
+#define EFB_MASK 0x80
+#define TASK_PRIO_MASK 0x78
+#define TASK_ATTR_MASK 0x07
/* ---------- SCB tasks ---------- */
/* This is both ssp_task and long_ssp_task
@@ -511,7 +474,7 @@ struct abort_task {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
@@ -549,7 +512,7 @@ struct clear_nexus {
u8 _r_b[3];
u8 conn_mask;
u8 _r_c[19];
- struct ssp_task_iu ssp_task; /* LUN and TAG */
+ struct ssp_tmf_iu ssp_task; /* LUN and TAG */
__le16 _r_d;
__le16 conn_handle;
__le64 _r_e;
@@ -562,7 +525,7 @@ struct initiate_ssp_tmf {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* itnl override and suspend data tx */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 0d2607d..42a84ef 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -344,6 +344,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 attr:3;
+ u8 prio:4;
+ u8 efb:1;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 _r_c:2;
+ u8 add_cdb_len:6;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
@@ -538,6 +575,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 efb:1;
+ u8 prio:4;
+ u8 attr:3;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 add_cdb_len:6;
+ u8 _r_c:2;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add devicetree bindings for HiSilicon SAS driver.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
.../devicetree/bindings/scsi/hisilicon-sas.txt | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
new file mode 100644
index 0000000..f67e761
--- /dev/null
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -0,0 +1,69 @@
+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+ - compatible : value should be as follows:
+ (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+ - sas-addr : array of 8 bytes for host SAS address
+ - reg : Address and length of the SAS register
+ - hisilicon,sas-syscon: phandle of syscon used for sas control
+ - ctrl-reset-reg : offset to controller reset register in ctrl reg
+ - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+ - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+ - queue-count : number of delivery and completion queues in the controller
+ - phy-count : number of phys accessible by the controller
+ - interrupts : Interrupts for phys, completion queues, and fatal
+ sources; the interrupts are ordered in 3 groups, as follows:
+ - Phy interrupts
+ - Completion queue interrupts
+ - Fatal interrupts
+ Phy interrupts : Each phy has 3 interrupt sources:
+ - broadcast
+ - phyup
+ - abnormal
+ The phy interrupts are ordered into groups of 3 per phy
+ (broadcast, phyup, and abnormal) in increasing order.
+ Completion queue interrupts : each completion queue has 1
+ interrupt source.
+ The interrupts are ordered in increasing order.
+ Fatal interrupts : the fatal interrupts are ordered as follows:
+ - ECC
+ - AXI bus
+
+Example:
+ sas0: sas@c1000000 {
+ compatible = "hisilicon,hip05-sas-v1";
+ sas-addr = [50 01 88 20 16 00 00 0a];
+ reg = <0x0 0xc1000000 0x0 0x10000>;
+ hisilicon,sas-syscon = <&pcie_sas>;
+ ctrl-reset-reg = <0xa60>;
+ ctrl-reset-sts-reg = <0x5a30>;
+ ctrl-clock-ena-reg = <0x338>;
+ queue-count = <32>;
+ phy-count = <8>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_dsa>;
+ interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */
+ <269 4>,<273 4>,<274 4>,/* phy1 */
+ <279 4>,<283 4>,<284 4>,/* phy2 */
+ <289 4>,<293 4>,<294 4>,/* phy3 */
+ <299 4>,<303 4>,<304 4>,/* phy4 */
+ <309 4>,<313 4>,<314 4>,/* phy5 */
+ <319 4>,<323 4>,<324 4>,/* phy6 */
+ <329 4>,<333 4>,<334 4>,/* phy7 */
+ <336 1>,<337 1>,<338 1>,/* cq0-2 */
+ <339 1>,<340 1>,<341 1>,/* cq3-5 */
+ <342 1>,<343 1>,<344 1>,/* cq6-8 */
+ <345 1>,<346 1>,<347 1>,/* cq9-11 */
+ <348 1>,<349 1>,<350 1>,/* cq12-14 */
+ <351 1>,<352 1>,<353 1>,/* cq15-17 */
+ <354 1>,<355 1>,<356 1>,/* cq18-20 */
+ <357 1>,<358 1>,<359 1>,/* cq21-23 */
+ <360 1>,<361 1>,<362 1>,/* cq24-26 */
+ <363 1>,<364 1>,<365 1>,/* cq27-29 */
+ <366 1>,<367 1>/* cq30-31 */
+ <376 4>,/* fatal ecc */
+ <381 4>;/* fatal axi */
+ status = "disabled";
+ };
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add devicetree bindings for HiSilicon SAS driver.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
.../devicetree/bindings/scsi/hisilicon-sas.txt | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
new file mode 100644
index 0000000..f67e761
--- /dev/null
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
@@ -0,0 +1,69 @@
+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+ - compatible : value should be as follows:
+ (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+ - sas-addr : array of 8 bytes for host SAS address
+ - reg : Address and length of the SAS register
+ - hisilicon,sas-syscon: phandle of syscon used for sas control
+ - ctrl-reset-reg : offset to controller reset register in ctrl reg
+ - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+ - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+ - queue-count : number of delivery and completion queues in the controller
+ - phy-count : number of phys accessible by the controller
+ - interrupts : Interrupts for phys, completion queues, and fatal
+ sources; the interrupts are ordered in 3 groups, as follows:
+ - Phy interrupts
+ - Completion queue interrupts
+ - Fatal interrupts
+ Phy interrupts : Each phy has 3 interrupt sources:
+ - broadcast
+ - phyup
+ - abnormal
+ The phy interrupts are ordered into groups of 3 per phy
+ (broadcast, phyup, and abnormal) in increasing order.
+ Completion queue interrupts : each completion queue has 1
+ interrupt source.
+ The interrupts are ordered in increasing order.
+ Fatal interrupts : the fatal interrupts are ordered as follows:
+ - ECC
+ - AXI bus
+
+Example:
+ sas0: sas@c1000000 {
+ compatible = "hisilicon,hip05-sas-v1";
+ sas-addr = [50 01 88 20 16 00 00 0a];
+ reg = <0x0 0xc1000000 0x0 0x10000>;
+ hisilicon,sas-syscon = <&pcie_sas>;
+ ctrl-reset-reg = <0xa60>;
+ ctrl-reset-sts-reg = <0x5a30>;
+ ctrl-clock-ena-reg = <0x338>;
+ queue-count = <32>;
+ phy-count = <8>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_dsa>;
+ interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */
+ <269 4>,<273 4>,<274 4>,/* phy1 */
+ <279 4>,<283 4>,<284 4>,/* phy2 */
+ <289 4>,<293 4>,<294 4>,/* phy3 */
+ <299 4>,<303 4>,<304 4>,/* phy4 */
+ <309 4>,<313 4>,<314 4>,/* phy5 */
+ <319 4>,<323 4>,<324 4>,/* phy6 */
+ <329 4>,<333 4>,<334 4>,/* phy7 */
+ <336 1>,<337 1>,<338 1>,/* cq0-2 */
+ <339 1>,<340 1>,<341 1>,/* cq3-5 */
+ <342 1>,<343 1>,<344 1>,/* cq6-8 */
+ <345 1>,<346 1>,<347 1>,/* cq9-11 */
+ <348 1>,<349 1>,<350 1>,/* cq12-14 */
+ <351 1>,<352 1>,<353 1>,/* cq15-17 */
+ <354 1>,<355 1>,<356 1>,/* cq18-20 */
+ <357 1>,<358 1>,<359 1>,/* cq21-23 */
+ <360 1>,<361 1>,<362 1>,/* cq24-26 */
+ <363 1>,<364 1>,<365 1>,/* cq27-29 */
+ <366 1>,<367 1>/* cq30-31 */
+ <376 4>,/* fatal ecc */
+ <381 4>;/* fatal axi */
+ status = "disabled";
+ };
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This patch adds the initial bare main driver for the
HiSilicon SAS HBA. This only introduces the changes to
build and load the main driver module.
The complete driver consists of the core main module and
also a module platform driver for driving the hw.
The HBA is a platform device.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/hisi_sas/Kconfig | 6 +++++
drivers/scsi/hisi_sas/Makefile | 1 +
drivers/scsi/hisi_sas/hisi_sas.h | 26 +++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 43 +++++++++++++++++++++++++++++++++++
6 files changed, 78 insertions(+)
create mode 100644 drivers/scsi/hisi_sas/Kconfig
create mode 100644 drivers/scsi/hisi_sas/Makefile
create mode 100644 drivers/scsi/hisi_sas/hisi_sas.h
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_main.c
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 5f692ae..1a6a711 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1766,5 +1766,6 @@ source "drivers/scsi/pcmcia/Kconfig"
source "drivers/scsi/device_handler/Kconfig"
source "drivers/scsi/osd/Kconfig"
+source "drivers/scsi/hisi_sas/Kconfig"
endmenu
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index c14bca4..862ab4e 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -157,6 +157,7 @@ obj-$(CONFIG_CHR_DEV_SCH) += ch.o
obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
new file mode 100644
index 0000000..37a0c71
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -0,0 +1,6 @@
+config SCSI_HISI_SAS
+ tristate "HiSilicon SAS"
+ select SCSI_SAS_LIBSAS
+ select BLK_DEV_INTEGRITY
+ help
+ This driver supports HiSilicon's SAS HBA
diff --git a/drivers/scsi/hisi_sas/Makefile b/drivers/scsi/hisi_sas/Makefile
new file mode 100644
index 0000000..d86b05e
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_main.o
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
new file mode 100644
index 0000000..a5cec22
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef _HISI_SAS_H_
+#define _HISI_SAS_H_
+
+#include <linux/dmapool.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <scsi/libsas.h>
+
+#define DRV_VERSION "v1.0"
+
+#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
new file mode 100644
index 0000000..7201363
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas"
+
+static struct scsi_transport_template *hisi_sas_stt;
+
+static struct sas_domain_function_template hisi_sas_transport_ops = {
+};
+
+static __init int hisi_sas_init(void)
+{
+ pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
+
+ hisi_sas_stt = sas_domain_attach_transport(&hisi_sas_transport_ops);
+ if (!hisi_sas_stt)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static __exit void hisi_sas_exit(void)
+{
+ sas_release_transport(hisi_sas_stt);
+}
+
+module_init(hisi_sas_init);
+module_exit(hisi_sas_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HISILICON SAS controller driver");
+MODULE_ALIAS("platform:" DRV_NAME);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This patch adds the initial bare main driver for the
HiSilicon SAS HBA. This only introduces the changes to
build and load the main driver module.
The complete driver consists of the core main module and
also a module platform driver for driving the hw.
The HBA is a platform device.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/hisi_sas/Kconfig | 6 +++++
drivers/scsi/hisi_sas/Makefile | 1 +
drivers/scsi/hisi_sas/hisi_sas.h | 26 +++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 43 +++++++++++++++++++++++++++++++++++
6 files changed, 78 insertions(+)
create mode 100644 drivers/scsi/hisi_sas/Kconfig
create mode 100644 drivers/scsi/hisi_sas/Makefile
create mode 100644 drivers/scsi/hisi_sas/hisi_sas.h
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_main.c
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 5f692ae..1a6a711 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1766,5 +1766,6 @@ source "drivers/scsi/pcmcia/Kconfig"
source "drivers/scsi/device_handler/Kconfig"
source "drivers/scsi/osd/Kconfig"
+source "drivers/scsi/hisi_sas/Kconfig"
endmenu
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index c14bca4..862ab4e 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -157,6 +157,7 @@ obj-$(CONFIG_CHR_DEV_SCH) += ch.o
obj-$(CONFIG_SCSI_ENCLOSURE) += ses.o
obj-$(CONFIG_SCSI_OSD_INITIATOR) += osd/
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas/
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
diff --git a/drivers/scsi/hisi_sas/Kconfig b/drivers/scsi/hisi_sas/Kconfig
new file mode 100644
index 0000000..37a0c71
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Kconfig
@@ -0,0 +1,6 @@
+config SCSI_HISI_SAS
+ tristate "HiSilicon SAS"
+ select SCSI_SAS_LIBSAS
+ select BLK_DEV_INTEGRITY
+ help
+ This driver supports HiSilicon's SAS HBA
diff --git a/drivers/scsi/hisi_sas/Makefile b/drivers/scsi/hisi_sas/Makefile
new file mode 100644
index 0000000..d86b05e
--- /dev/null
+++ b/drivers/scsi/hisi_sas/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_main.o
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
new file mode 100644
index 0000000..a5cec22
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef _HISI_SAS_H_
+#define _HISI_SAS_H_
+
+#include <linux/dmapool.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <scsi/libsas.h>
+
+#define DRV_VERSION "v1.0"
+
+#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
new file mode 100644
index 0000000..7201363
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas"
+
+static struct scsi_transport_template *hisi_sas_stt;
+
+static struct sas_domain_function_template hisi_sas_transport_ops = {
+};
+
+static __init int hisi_sas_init(void)
+{
+ pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
+
+ hisi_sas_stt = sas_domain_attach_transport(&hisi_sas_transport_ops);
+ if (!hisi_sas_stt)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static __exit void hisi_sas_exit(void)
+{
+ sas_release_transport(hisi_sas_stt);
+}
+
+module_init(hisi_sas_init);
+module_exit(hisi_sas_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HISILICON SAS controller driver");
+MODULE_ALIAS("platform:" DRV_NAME);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add functionality to register device as a scsi host.
The SAS domain transport ops are empty at this point.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 34 ++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 116 ++++++++++++++++++++++++++++++++++
2 files changed, 150 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index a5cec22..6f57fd1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -23,4 +23,38 @@
#define DRV_VERSION "v1.0"
+#define HISI_SAS_MAX_PHYS 9
+#define HISI_SAS_MAX_ITCT_ENTRIES 4096
+#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
+#define HISI_SAS_COMMAND_ENTRIES 8192
+
+struct hisi_sas_phy {
+ struct asd_sas_phy sas_phy;
+};
+
+struct hisi_sas_port {
+ struct asd_sas_port sas_port;
+};
+
+struct hisi_sas_hw {
+};
+
+struct hisi_hba {
+ /* This must be the first element, used by SHOST_TO_SAS_HA */
+ struct sas_ha_struct *p;
+
+ struct platform_device *pdev;
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ int n_phy;
+
+ /* SCSI/SAS glue */
+ struct sas_ha_struct sha;
+ struct Scsi_Host *shost;
+ struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
+ struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+ const struct hisi_sas_hw *hw; /* Low level hw interface */
+};
+
+#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7201363..4fd000e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -14,9 +14,125 @@
static struct scsi_transport_template *hisi_sas_stt;
+static struct scsi_host_template hisi_sas_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .change_queue_depth = sas_change_queue_depth,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
static struct sas_domain_function_template hisi_sas_transport_ops = {
};
+static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+
+ shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
+ if (!shost)
+ goto err_out;
+ hisi_hba = shost_priv(shost);
+
+ hisi_hba->hw = hw;
+ hisi_hba->pdev = pdev;
+ hisi_hba->shost = shost;
+ SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+
+ return shost;
+err_out:
+ dev_err(dev, "shost alloc failed\n");
+ return NULL;
+}
+
+int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha;
+ int rc, phy_nr, port_nr, i;
+
+ shost = hisi_sas_shost_alloc(pdev, hw);
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_ha;
+ }
+
+ sha = SHOST_TO_SAS_HA(shost);
+ hisi_hba = shost_priv(shost);
+ platform_set_drvdata(pdev, sha);
+ hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
+ phy_nr = port_nr = hisi_hba->n_phy;
+
+ arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
+ arr_port = devm_kcalloc(dev, port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port)
+ return -ENOMEM;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->core.shost = shost;
+ sha->lldd_ha = hisi_hba;
+
+ shost->transportt = hisi_sas_stt;
+ shost->max_id = HISI_SAS_MAX_DEVICES;
+ shost->max_lun = ~0;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+ shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
+ shost->can_queue = HISI_SAS_COMMAND_ENTRIES;
+ shost->cmd_per_lun = HISI_SAS_COMMAND_ENTRIES;
+
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = &hisi_hba->pdev->dev;
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &hisi_hba->sas_addr[0];
+ sha->num_phys = hisi_hba->n_phy;
+ sha->core.shost = hisi_hba->shost;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ sha->sas_phy[i] = &hisi_hba->phy[i].sas_phy;
+ sha->sas_port[i] = &hisi_hba->port[i].sas_port;
+ }
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha;
+
+ rc = sas_register_ha(sha);
+ if (rc)
+ goto err_out_register_ha;
+
+ scsi_scan_host(shost);
+
+ return 0;
+
+err_out_register_ha:
+ scsi_remove_host(shost);
+err_out_ha:
+ kfree(shost);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_probe);
+
static __init int hisi_sas_init(void)
{
pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add functionality to register device as a scsi host.
The SAS domain transport ops are empty at this point.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 34 ++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 116 ++++++++++++++++++++++++++++++++++
2 files changed, 150 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index a5cec22..6f57fd1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -23,4 +23,38 @@
#define DRV_VERSION "v1.0"
+#define HISI_SAS_MAX_PHYS 9
+#define HISI_SAS_MAX_ITCT_ENTRIES 4096
+#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
+#define HISI_SAS_COMMAND_ENTRIES 8192
+
+struct hisi_sas_phy {
+ struct asd_sas_phy sas_phy;
+};
+
+struct hisi_sas_port {
+ struct asd_sas_port sas_port;
+};
+
+struct hisi_sas_hw {
+};
+
+struct hisi_hba {
+ /* This must be the first element, used by SHOST_TO_SAS_HA */
+ struct sas_ha_struct *p;
+
+ struct platform_device *pdev;
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ int n_phy;
+
+ /* SCSI/SAS glue */
+ struct sas_ha_struct sha;
+ struct Scsi_Host *shost;
+ struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
+ struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+ const struct hisi_sas_hw *hw; /* Low level hw interface */
+};
+
+#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7201363..4fd000e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -14,9 +14,125 @@
static struct scsi_transport_template *hisi_sas_stt;
+static struct scsi_host_template hisi_sas_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = sas_slave_configure,
+ .change_queue_depth = sas_change_queue_depth,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
static struct sas_domain_function_template hisi_sas_transport_ops = {
};
+static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+
+ shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
+ if (!shost)
+ goto err_out;
+ hisi_hba = shost_priv(shost);
+
+ hisi_hba->hw = hw;
+ hisi_hba->pdev = pdev;
+ hisi_hba->shost = shost;
+ SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+
+ return shost;
+err_out:
+ dev_err(dev, "shost alloc failed\n");
+ return NULL;
+}
+
+int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *hw)
+{
+ struct Scsi_Host *shost;
+ struct hisi_hba *hisi_hba;
+ struct device *dev = &pdev->dev;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha;
+ int rc, phy_nr, port_nr, i;
+
+ shost = hisi_sas_shost_alloc(pdev, hw);
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_ha;
+ }
+
+ sha = SHOST_TO_SAS_HA(shost);
+ hisi_hba = shost_priv(shost);
+ platform_set_drvdata(pdev, sha);
+ hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
+ phy_nr = port_nr = hisi_hba->n_phy;
+
+ arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
+ arr_port = devm_kcalloc(dev, port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port)
+ return -ENOMEM;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->core.shost = shost;
+ sha->lldd_ha = hisi_hba;
+
+ shost->transportt = hisi_sas_stt;
+ shost->max_id = HISI_SAS_MAX_DEVICES;
+ shost->max_lun = ~0;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+ shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
+ shost->can_queue = HISI_SAS_COMMAND_ENTRIES;
+ shost->cmd_per_lun = HISI_SAS_COMMAND_ENTRIES;
+
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = &hisi_hba->pdev->dev;
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &hisi_hba->sas_addr[0];
+ sha->num_phys = hisi_hba->n_phy;
+ sha->core.shost = hisi_hba->shost;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ sha->sas_phy[i] = &hisi_hba->phy[i].sas_phy;
+ sha->sas_port[i] = &hisi_hba->port[i].sas_port;
+ }
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha;
+
+ rc = sas_register_ha(sha);
+ if (rc)
+ goto err_out_register_ha;
+
+ scsi_scan_host(shost);
+
+ return 0;
+
+err_out_register_ha:
+ scsi_remove_host(shost);
+err_out_ha:
+ kfree(shost);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_probe);
+
static __init int hisi_sas_init(void)
{
pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 05/32] scsi: hisi_sas: scan device tree
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Scan the device tree for all properties. Also
do this:
- do ioremap for SAS registers
- allocate memory for interrupt names
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 10 ++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 45 ++++++++++++++++++++++++++++++++++-
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6f57fd1..87f4b61 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -28,6 +28,8 @@
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_COMMAND_ENTRIES 8192
+#define HISI_SAS_NAME_LEN 32
+
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
};
@@ -44,6 +46,11 @@ struct hisi_hba {
struct sas_ha_struct *p;
struct platform_device *pdev;
+ void __iomem *regs;
+ struct regmap *ctrl;
+ u32 ctrl_reset_reg;
+ u32 ctrl_reset_sts_reg;
+ u32 ctrl_clock_ena_reg;
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
@@ -53,6 +60,9 @@ struct hisi_hba {
struct Scsi_Host *shost;
struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+
+ int queue_count;
+ char *int_names;
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4fd000e..4fc5a6c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -39,9 +39,13 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
+ struct resource *res;
struct Scsi_Host *shost;
struct hisi_hba *hisi_hba;
struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct property *sas_addr_prop;
+ int num;
shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
if (!shost)
@@ -53,6 +57,46 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
hisi_hba->shost = shost;
SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+ sas_addr_prop = of_find_property(np, "sas-addr", NULL);
+ if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
+ goto err_out;
+ memcpy(hisi_hba->sas_addr, sas_addr_prop->value, SAS_ADDR_SIZE);
+
+ if (of_property_read_u32(np, "ctrl-reset-reg",
+ &hisi_hba->ctrl_reset_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "ctrl-reset-sts-reg",
+ &hisi_hba->ctrl_reset_sts_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "ctrl-clock-ena-reg",
+ &hisi_hba->ctrl_clock_ena_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "phy-count", &hisi_hba->n_phy))
+ goto err_out;
+
+ if (of_property_read_u32(np, "queue-count", &hisi_hba->queue_count))
+ goto err_out;
+
+ num = of_irq_count(np);
+ hisi_hba->int_names = devm_kcalloc(dev, num,
+ HISI_SAS_NAME_LEN,
+ GFP_KERNEL);
+ if (!hisi_hba->int_names)
+ goto err_out;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hisi_hba->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hisi_hba->regs))
+ goto err_out;
+
+ hisi_hba->ctrl = syscon_regmap_lookup_by_phandle(
+ np, "hisilicon,sas-syscon");
+ if (IS_ERR(hisi_hba->ctrl))
+ goto err_out;
+
return shost;
err_out:
dev_err(dev, "shost alloc failed\n");
@@ -79,7 +123,6 @@ int hisi_sas_probe(struct platform_device *pdev,
sha = SHOST_TO_SAS_HA(shost);
hisi_hba = shost_priv(shost);
platform_set_drvdata(pdev, sha);
- hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
phy_nr = port_nr = hisi_hba->n_phy;
arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 05/32] scsi: hisi_sas: scan device tree
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Scan the device tree for all properties. Also
do this:
- do ioremap for SAS registers
- allocate memory for interrupt names
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 10 ++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 45 ++++++++++++++++++++++++++++++++++-
2 files changed, 54 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6f57fd1..87f4b61 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -28,6 +28,8 @@
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_COMMAND_ENTRIES 8192
+#define HISI_SAS_NAME_LEN 32
+
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
};
@@ -44,6 +46,11 @@ struct hisi_hba {
struct sas_ha_struct *p;
struct platform_device *pdev;
+ void __iomem *regs;
+ struct regmap *ctrl;
+ u32 ctrl_reset_reg;
+ u32 ctrl_reset_sts_reg;
+ u32 ctrl_clock_ena_reg;
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
@@ -53,6 +60,9 @@ struct hisi_hba {
struct Scsi_Host *shost;
struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
+
+ int queue_count;
+ char *int_names;
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4fd000e..4fc5a6c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -39,9 +39,13 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
+ struct resource *res;
struct Scsi_Host *shost;
struct hisi_hba *hisi_hba;
struct device *dev = &pdev->dev;
+ struct device_node *np = pdev->dev.of_node;
+ struct property *sas_addr_prop;
+ int num;
shost = scsi_host_alloc(&hisi_sas_sht, sizeof(*hisi_hba));
if (!shost)
@@ -53,6 +57,46 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
hisi_hba->shost = shost;
SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+ sas_addr_prop = of_find_property(np, "sas-addr", NULL);
+ if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
+ goto err_out;
+ memcpy(hisi_hba->sas_addr, sas_addr_prop->value, SAS_ADDR_SIZE);
+
+ if (of_property_read_u32(np, "ctrl-reset-reg",
+ &hisi_hba->ctrl_reset_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "ctrl-reset-sts-reg",
+ &hisi_hba->ctrl_reset_sts_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "ctrl-clock-ena-reg",
+ &hisi_hba->ctrl_clock_ena_reg))
+ goto err_out;
+
+ if (of_property_read_u32(np, "phy-count", &hisi_hba->n_phy))
+ goto err_out;
+
+ if (of_property_read_u32(np, "queue-count", &hisi_hba->queue_count))
+ goto err_out;
+
+ num = of_irq_count(np);
+ hisi_hba->int_names = devm_kcalloc(dev, num,
+ HISI_SAS_NAME_LEN,
+ GFP_KERNEL);
+ if (!hisi_hba->int_names)
+ goto err_out;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hisi_hba->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(hisi_hba->regs))
+ goto err_out;
+
+ hisi_hba->ctrl = syscon_regmap_lookup_by_phandle(
+ np, "hisilicon,sas-syscon");
+ if (IS_ERR(hisi_hba->ctrl))
+ goto err_out;
+
return shost;
err_out:
dev_err(dev, "shost alloc failed\n");
@@ -79,7 +123,6 @@ int hisi_sas_probe(struct platform_device *pdev,
sha = SHOST_TO_SAS_HA(shost);
hisi_hba = shost_priv(shost);
platform_set_drvdata(pdev, sha);
- hisi_hba->n_phy = HISI_SAS_MAX_PHYS;
phy_nr = port_nr = hisi_hba->n_phy;
arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 131 +++++++++++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 87f4b61..19d40b7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -66,5 +66,136 @@ struct hisi_hba {
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
+/* Generic HW DMA host memory structures */
+/* Delivery queue header */
+struct hisi_sas_cmd_hdr {
+ /* dw0 */
+ __le32 dw0;
+
+ /* dw1 */
+ __le32 dw1;
+
+ /* dw2 */
+ __le32 dw2;
+
+ /* dw3 */
+ __le32 transfer_tags;
+
+ /* dw4 */
+ __le32 data_transfer_len;
+
+ /* dw5 */
+ __le32 first_burst_num;
+
+ /* dw6 */
+ __le32 sg_len;
+
+ /* dw7 */
+ __le32 dw7;
+
+ /* dw8-9 */
+ __le64 cmd_table_addr;
+
+ /* dw10-11 */
+ __le64 sts_buffer_addr;
+
+ /* dw12-13 */
+ __le64 prd_table_addr;
+
+ /* dw14-15 */
+ __le64 dif_prd_table_addr;
+};
+
+struct hisi_sas_itct {
+ __le64 qw0;
+ __le64 sas_addr;
+ __le64 qw2;
+ __le64 qw3;
+ __le64 qw4;
+ __le64 qw_sata_ncq0_3;
+ __le64 qw_sata_ncq7_4;
+ __le64 qw_sata_ncq11_8;
+ __le64 qw_sata_ncq15_12;
+ __le64 qw_sata_ncq19_16;
+ __le64 qw_sata_ncq23_20;
+ __le64 qw_sata_ncq27_24;
+ __le64 qw_sata_ncq31_28;
+ __le64 qw_non_ncq_iptt;
+ __le64 qw_rsvd0;
+ __le64 qw_rsvd1;
+};
+
+struct hisi_sas_iost {
+ __le64 qw0;
+ __le64 qw1;
+ __le64 qw2;
+ __le64 qw3;
+};
+
+struct hisi_sas_err_record {
+ /* dw0 */
+ __le32 dma_err_type;
+
+ /* dw1 */
+ __le32 trans_tx_fail_type;
+
+ /* dw2 */
+ __le32 trans_rx_fail_type;
+
+ /* dw3 */
+ u32 rsvd;
+};
+
+struct hisi_sas_initial_fis {
+ struct hisi_sas_err_record err_record;
+ struct dev_to_host_fis fis;
+ u32 rsvd[3];
+};
+
+struct hisi_sas_breakpoint {
+ u8 data[128]; /*io128 byte*/
+};
+
+struct hisi_sas_sge {
+ __le64 addr;
+ __le32 page_ctrl_0;
+ __le32 page_ctrl_1;
+ __le32 data_len;
+ __le32 data_off;
+};
+
+struct hisi_sas_command_table_smp {
+ u8 bytes[44];
+};
+
+struct hisi_sas_command_table_stp {
+ struct host_to_dev_fis command_fis;
+ u8 dummy[12];
+ u8 atapi_cdb[ATAPI_CDB_LEN];
+};
+
#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
+struct hisi_sas_sge_page {
+ struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
+};
+
+struct hisi_sas_command_table_ssp {
+ struct ssp_frame_hdr hdr;
+ union {
+ struct {
+ struct ssp_command_iu task;
+ u32 prot[6];
+ };
+ struct ssp_tmf_iu ssp_task;
+ struct xfer_rdy_iu xfer_rdy;
+ struct ssp_response_iu ssp_res;
+ } u;
+};
+
+union hisi_sas_command_table {
+ struct hisi_sas_command_table_ssp ssp;
+ struct hisi_sas_command_table_smp smp;
+ struct hisi_sas_command_table_stp stp;
+};
+
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 131 +++++++++++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 87f4b61..19d40b7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -66,5 +66,136 @@ struct hisi_hba {
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
+/* Generic HW DMA host memory structures */
+/* Delivery queue header */
+struct hisi_sas_cmd_hdr {
+ /* dw0 */
+ __le32 dw0;
+
+ /* dw1 */
+ __le32 dw1;
+
+ /* dw2 */
+ __le32 dw2;
+
+ /* dw3 */
+ __le32 transfer_tags;
+
+ /* dw4 */
+ __le32 data_transfer_len;
+
+ /* dw5 */
+ __le32 first_burst_num;
+
+ /* dw6 */
+ __le32 sg_len;
+
+ /* dw7 */
+ __le32 dw7;
+
+ /* dw8-9 */
+ __le64 cmd_table_addr;
+
+ /* dw10-11 */
+ __le64 sts_buffer_addr;
+
+ /* dw12-13 */
+ __le64 prd_table_addr;
+
+ /* dw14-15 */
+ __le64 dif_prd_table_addr;
+};
+
+struct hisi_sas_itct {
+ __le64 qw0;
+ __le64 sas_addr;
+ __le64 qw2;
+ __le64 qw3;
+ __le64 qw4;
+ __le64 qw_sata_ncq0_3;
+ __le64 qw_sata_ncq7_4;
+ __le64 qw_sata_ncq11_8;
+ __le64 qw_sata_ncq15_12;
+ __le64 qw_sata_ncq19_16;
+ __le64 qw_sata_ncq23_20;
+ __le64 qw_sata_ncq27_24;
+ __le64 qw_sata_ncq31_28;
+ __le64 qw_non_ncq_iptt;
+ __le64 qw_rsvd0;
+ __le64 qw_rsvd1;
+};
+
+struct hisi_sas_iost {
+ __le64 qw0;
+ __le64 qw1;
+ __le64 qw2;
+ __le64 qw3;
+};
+
+struct hisi_sas_err_record {
+ /* dw0 */
+ __le32 dma_err_type;
+
+ /* dw1 */
+ __le32 trans_tx_fail_type;
+
+ /* dw2 */
+ __le32 trans_rx_fail_type;
+
+ /* dw3 */
+ u32 rsvd;
+};
+
+struct hisi_sas_initial_fis {
+ struct hisi_sas_err_record err_record;
+ struct dev_to_host_fis fis;
+ u32 rsvd[3];
+};
+
+struct hisi_sas_breakpoint {
+ u8 data[128]; /*io128 byte*/
+};
+
+struct hisi_sas_sge {
+ __le64 addr;
+ __le32 page_ctrl_0;
+ __le32 page_ctrl_1;
+ __le32 data_len;
+ __le32 data_off;
+};
+
+struct hisi_sas_command_table_smp {
+ u8 bytes[44];
+};
+
+struct hisi_sas_command_table_stp {
+ struct host_to_dev_fis command_fis;
+ u8 dummy[12];
+ u8 atapi_cdb[ATAPI_CDB_LEN];
+};
+
#define HISI_SAS_SGE_PAGE_CNT SCSI_MAX_SG_SEGMENTS
+struct hisi_sas_sge_page {
+ struct hisi_sas_sge sge[HISI_SAS_SGE_PAGE_CNT];
+};
+
+struct hisi_sas_command_table_ssp {
+ struct ssp_frame_hdr hdr;
+ union {
+ struct {
+ struct ssp_command_iu task;
+ u32 prot[6];
+ };
+ struct ssp_tmf_iu ssp_task;
+ struct xfer_rdy_iu xfer_rdy;
+ struct ssp_response_iu ssp_res;
+ } u;
+};
+
+union hisi_sas_command_table {
+ struct hisi_sas_command_table_ssp ssp;
+ struct hisi_sas_command_table_smp smp;
+ struct hisi_sas_command_table_stp stp;
+};
+
#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Allocate DMA and non-DMA memories for the controller. Also
create DMA pools.
These include:
- Delivery queues
- Completion queues
- Command status buffer
- Command table
- ITCT (For device context)
- Host slot info
- IO status
- Breakpoint
- host slot indexing
- SG data
- FIS
- interrupts names
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 30 +++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 94 +++++++++++++++++++++++++++++++++++
2 files changed, 124 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 19d40b7..6d1b7d8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -24,10 +24,17 @@
#define DRV_VERSION "v1.0"
#define HISI_SAS_MAX_PHYS 9
+#define HISI_SAS_MAX_QUEUES 32
+#define HISI_SAS_QUEUE_SLOTS 512
#define HISI_SAS_MAX_ITCT_ENTRIES 4096
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_COMMAND_ENTRIES 8192
+#define HISI_SAS_STATUS_BUF_SZ \
+ (sizeof(struct hisi_sas_err_record) + 1024)
+#define HISI_SAS_COMMAND_TABLE_SZ \
+ (((sizeof(union hisi_sas_command_table)+3)/4)*4)
+
#define HISI_SAS_NAME_LEN 32
struct hisi_sas_phy {
@@ -38,7 +45,11 @@ struct hisi_sas_port {
struct asd_sas_port sas_port;
};
+struct hisi_sas_slot {
+};
+
struct hisi_sas_hw {
+ int complete_hdr_size;
};
struct hisi_hba {
@@ -63,6 +74,25 @@ struct hisi_hba {
int queue_count;
char *int_names;
+
+ struct dma_pool *sge_page_pool;
+ struct dma_pool *command_table_pool;
+ struct dma_pool *status_buffer_pool;
+ struct hisi_sas_cmd_hdr *cmd_hdr[HISI_SAS_MAX_QUEUES];
+ dma_addr_t cmd_hdr_dma[HISI_SAS_MAX_QUEUES];
+ void *complete_hdr[HISI_SAS_MAX_QUEUES];
+ dma_addr_t complete_hdr_dma[HISI_SAS_MAX_QUEUES];
+ struct hisi_sas_initial_fis *initial_fis;
+ dma_addr_t initial_fis_dma;
+ struct hisi_sas_itct *itct;
+ dma_addr_t itct_dma;
+ struct hisi_sas_iost *iost;
+ dma_addr_t iost_dma;
+ struct hisi_sas_breakpoint *breakpoint;
+ dma_addr_t breakpoint_dma;
+ struct hisi_sas_breakpoint *sata_breakpoint;
+ dma_addr_t sata_breakpoint_dma;
+ struct hisi_sas_slot *slot_info;
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4fc5a6c..97f5368 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -36,6 +36,97 @@ static struct scsi_host_template hisi_sas_sht = {
static struct sas_domain_function_template hisi_sas_transport_ops = {
};
+static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
+{
+ int i, s;
+ struct platform_device *pdev = hisi_hba->pdev;
+ struct device *dev = &pdev->dev;
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
+ hisi_hba->cmd_hdr[i] = dma_alloc_coherent(dev, s,
+ &hisi_hba->cmd_hdr_dma[i], GFP_KERNEL);
+ if (!hisi_hba->cmd_hdr[i])
+ goto err_out;
+ memset(hisi_hba->cmd_hdr[i], 0, s);
+
+ /* Completion queue */
+ s = hisi_hba->hw->complete_hdr_size * HISI_SAS_QUEUE_SLOTS;
+ hisi_hba->complete_hdr[i] = dma_alloc_coherent(dev, s,
+ &hisi_hba->complete_hdr_dma[i], GFP_KERNEL);
+ if (!hisi_hba->complete_hdr[i])
+ goto err_out;
+ memset(hisi_hba->complete_hdr[i], 0, s);
+ }
+
+ s = HISI_SAS_STATUS_BUF_SZ;
+ hisi_hba->status_buffer_pool = dma_pool_create("status_buffer",
+ dev, s, 16, 0);
+ if (!hisi_hba->status_buffer_pool)
+ goto err_out;
+
+ s = HISI_SAS_COMMAND_TABLE_SZ;
+ hisi_hba->command_table_pool = dma_pool_create("command_table",
+ dev, s, 16, 0);
+ if (!hisi_hba->command_table_pool)
+ goto err_out;
+
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_itct);
+ hisi_hba->itct = dma_alloc_coherent(dev, s, &hisi_hba->itct_dma,
+ GFP_KERNEL);
+ if (!hisi_hba->itct)
+ goto err_out;
+
+ memset(hisi_hba->itct, 0, s);
+
+ hisi_hba->slot_info = devm_kcalloc(dev, HISI_SAS_COMMAND_ENTRIES,
+ sizeof(struct hisi_sas_slot),
+ GFP_KERNEL);
+ if (!hisi_hba->slot_info)
+ goto err_out;
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_iost);
+ hisi_hba->iost = dma_alloc_coherent(dev, s, &hisi_hba->iost_dma,
+ GFP_KERNEL);
+ if (!hisi_hba->iost)
+ goto err_out;
+
+ memset(hisi_hba->iost, 0, s);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint);
+ hisi_hba->breakpoint = dma_alloc_coherent(dev, s,
+ &hisi_hba->breakpoint_dma, GFP_KERNEL);
+ if (!hisi_hba->breakpoint)
+ goto err_out;
+
+ memset(hisi_hba->breakpoint, 0, s);
+
+ hisi_hba->sge_page_pool = dma_pool_create("status_sge", dev,
+ sizeof(struct hisi_sas_sge_page), 16, 0);
+ if (!hisi_hba->sge_page_pool)
+ goto err_out;
+
+ s = sizeof(struct hisi_sas_initial_fis) * HISI_SAS_MAX_PHYS;
+ hisi_hba->initial_fis = dma_alloc_coherent(dev, s,
+ &hisi_hba->initial_fis_dma, GFP_KERNEL);
+ if (!hisi_hba->initial_fis)
+ goto err_out;
+ memset(hisi_hba->initial_fis, 0, s);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint) * 2;
+ hisi_hba->sata_breakpoint = dma_alloc_coherent(dev, s,
+ &hisi_hba->sata_breakpoint_dma, GFP_KERNEL);
+ if (!hisi_hba->sata_breakpoint)
+ goto err_out;
+ memset(hisi_hba->sata_breakpoint, 0, s);
+
+ return 0;
+err_out:
+ return -ENOMEM;
+}
+
+
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
@@ -97,6 +188,9 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
if (IS_ERR(hisi_hba->ctrl))
goto err_out;
+ if (hisi_sas_alloc(hisi_hba, shost))
+ goto err_out;
+
return shost;
err_out:
dev_err(dev, "shost alloc failed\n");
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Allocate DMA and non-DMA memories for the controller. Also
create DMA pools.
These include:
- Delivery queues
- Completion queues
- Command status buffer
- Command table
- ITCT (For device context)
- Host slot info
- IO status
- Breakpoint
- host slot indexing
- SG data
- FIS
- interrupts names
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 30 +++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 94 +++++++++++++++++++++++++++++++++++
2 files changed, 124 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 19d40b7..6d1b7d8 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -24,10 +24,17 @@
#define DRV_VERSION "v1.0"
#define HISI_SAS_MAX_PHYS 9
+#define HISI_SAS_MAX_QUEUES 32
+#define HISI_SAS_QUEUE_SLOTS 512
#define HISI_SAS_MAX_ITCT_ENTRIES 4096
#define HISI_SAS_MAX_DEVICES HISI_SAS_MAX_ITCT_ENTRIES
#define HISI_SAS_COMMAND_ENTRIES 8192
+#define HISI_SAS_STATUS_BUF_SZ \
+ (sizeof(struct hisi_sas_err_record) + 1024)
+#define HISI_SAS_COMMAND_TABLE_SZ \
+ (((sizeof(union hisi_sas_command_table)+3)/4)*4)
+
#define HISI_SAS_NAME_LEN 32
struct hisi_sas_phy {
@@ -38,7 +45,11 @@ struct hisi_sas_port {
struct asd_sas_port sas_port;
};
+struct hisi_sas_slot {
+};
+
struct hisi_sas_hw {
+ int complete_hdr_size;
};
struct hisi_hba {
@@ -63,6 +74,25 @@ struct hisi_hba {
int queue_count;
char *int_names;
+
+ struct dma_pool *sge_page_pool;
+ struct dma_pool *command_table_pool;
+ struct dma_pool *status_buffer_pool;
+ struct hisi_sas_cmd_hdr *cmd_hdr[HISI_SAS_MAX_QUEUES];
+ dma_addr_t cmd_hdr_dma[HISI_SAS_MAX_QUEUES];
+ void *complete_hdr[HISI_SAS_MAX_QUEUES];
+ dma_addr_t complete_hdr_dma[HISI_SAS_MAX_QUEUES];
+ struct hisi_sas_initial_fis *initial_fis;
+ dma_addr_t initial_fis_dma;
+ struct hisi_sas_itct *itct;
+ dma_addr_t itct_dma;
+ struct hisi_sas_iost *iost;
+ dma_addr_t iost_dma;
+ struct hisi_sas_breakpoint *breakpoint;
+ dma_addr_t breakpoint_dma;
+ struct hisi_sas_breakpoint *sata_breakpoint;
+ dma_addr_t sata_breakpoint_dma;
+ struct hisi_sas_slot *slot_info;
const struct hisi_sas_hw *hw; /* Low level hw interface */
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4fc5a6c..97f5368 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -36,6 +36,97 @@ static struct scsi_host_template hisi_sas_sht = {
static struct sas_domain_function_template hisi_sas_transport_ops = {
};
+static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
+{
+ int i, s;
+ struct platform_device *pdev = hisi_hba->pdev;
+ struct device *dev = &pdev->dev;
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
+ hisi_hba->cmd_hdr[i] = dma_alloc_coherent(dev, s,
+ &hisi_hba->cmd_hdr_dma[i], GFP_KERNEL);
+ if (!hisi_hba->cmd_hdr[i])
+ goto err_out;
+ memset(hisi_hba->cmd_hdr[i], 0, s);
+
+ /* Completion queue */
+ s = hisi_hba->hw->complete_hdr_size * HISI_SAS_QUEUE_SLOTS;
+ hisi_hba->complete_hdr[i] = dma_alloc_coherent(dev, s,
+ &hisi_hba->complete_hdr_dma[i], GFP_KERNEL);
+ if (!hisi_hba->complete_hdr[i])
+ goto err_out;
+ memset(hisi_hba->complete_hdr[i], 0, s);
+ }
+
+ s = HISI_SAS_STATUS_BUF_SZ;
+ hisi_hba->status_buffer_pool = dma_pool_create("status_buffer",
+ dev, s, 16, 0);
+ if (!hisi_hba->status_buffer_pool)
+ goto err_out;
+
+ s = HISI_SAS_COMMAND_TABLE_SZ;
+ hisi_hba->command_table_pool = dma_pool_create("command_table",
+ dev, s, 16, 0);
+ if (!hisi_hba->command_table_pool)
+ goto err_out;
+
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_itct);
+ hisi_hba->itct = dma_alloc_coherent(dev, s, &hisi_hba->itct_dma,
+ GFP_KERNEL);
+ if (!hisi_hba->itct)
+ goto err_out;
+
+ memset(hisi_hba->itct, 0, s);
+
+ hisi_hba->slot_info = devm_kcalloc(dev, HISI_SAS_COMMAND_ENTRIES,
+ sizeof(struct hisi_sas_slot),
+ GFP_KERNEL);
+ if (!hisi_hba->slot_info)
+ goto err_out;
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_iost);
+ hisi_hba->iost = dma_alloc_coherent(dev, s, &hisi_hba->iost_dma,
+ GFP_KERNEL);
+ if (!hisi_hba->iost)
+ goto err_out;
+
+ memset(hisi_hba->iost, 0, s);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint);
+ hisi_hba->breakpoint = dma_alloc_coherent(dev, s,
+ &hisi_hba->breakpoint_dma, GFP_KERNEL);
+ if (!hisi_hba->breakpoint)
+ goto err_out;
+
+ memset(hisi_hba->breakpoint, 0, s);
+
+ hisi_hba->sge_page_pool = dma_pool_create("status_sge", dev,
+ sizeof(struct hisi_sas_sge_page), 16, 0);
+ if (!hisi_hba->sge_page_pool)
+ goto err_out;
+
+ s = sizeof(struct hisi_sas_initial_fis) * HISI_SAS_MAX_PHYS;
+ hisi_hba->initial_fis = dma_alloc_coherent(dev, s,
+ &hisi_hba->initial_fis_dma, GFP_KERNEL);
+ if (!hisi_hba->initial_fis)
+ goto err_out;
+ memset(hisi_hba->initial_fis, 0, s);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint) * 2;
+ hisi_hba->sata_breakpoint = dma_alloc_coherent(dev, s,
+ &hisi_hba->sata_breakpoint_dma, GFP_KERNEL);
+ if (!hisi_hba->sata_breakpoint)
+ goto err_out;
+ memset(hisi_hba->sata_breakpoint, 0, s);
+
+ return 0;
+err_out:
+ return -ENOMEM;
+}
+
+
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
@@ -97,6 +188,9 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
if (IS_ERR(hisi_hba->ctrl))
goto err_out;
+ if (hisi_sas_alloc(hisi_hba, shost))
+ goto err_out;
+
return shost;
err_out:
dev_err(dev, "shost alloc failed\n");
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This patch also includes relevant memory/pool
free'ing and sas/scsi host removal
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 71 ++++++++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 97f5368..b96a2ab 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -126,6 +126,59 @@ err_out:
return -ENOMEM;
}
+static void hisi_sas_free(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int i, s;
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
+ if (hisi_hba->cmd_hdr[i])
+ dma_free_coherent(dev, s,
+ hisi_hba->cmd_hdr[i],
+ hisi_hba->cmd_hdr_dma[i]);
+
+ s = hisi_hba->hw->complete_hdr_size * HISI_SAS_QUEUE_SLOTS;
+ if (hisi_hba->complete_hdr[i])
+ dma_free_coherent(dev, s,
+ hisi_hba->complete_hdr[i],
+ hisi_hba->complete_hdr_dma[i]);
+ }
+
+ dma_pool_destroy(hisi_hba->status_buffer_pool);
+ dma_pool_destroy(hisi_hba->command_table_pool);
+ dma_pool_destroy(hisi_hba->sge_page_pool);
+
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_itct);
+ if (hisi_hba->itct)
+ dma_free_coherent(dev, s,
+ hisi_hba->itct, hisi_hba->itct_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_iost);
+ if (hisi_hba->iost)
+ dma_free_coherent(dev, s,
+ hisi_hba->iost, hisi_hba->iost_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint);
+ if (hisi_hba->breakpoint)
+ dma_free_coherent(dev, s,
+ hisi_hba->breakpoint,
+ hisi_hba->breakpoint_dma);
+
+
+ s = sizeof(struct hisi_sas_initial_fis) * HISI_SAS_MAX_PHYS;
+ if (hisi_hba->initial_fis)
+ dma_free_coherent(dev, s,
+ hisi_hba->initial_fis,
+ hisi_hba->initial_fis_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint) * 2;
+ if (hisi_hba->sata_breakpoint)
+ dma_free_coherent(dev, s,
+ hisi_hba->sata_breakpoint,
+ hisi_hba->sata_breakpoint_dma);
+
+}
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
@@ -188,8 +241,10 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
if (IS_ERR(hisi_hba->ctrl))
goto err_out;
- if (hisi_sas_alloc(hisi_hba, shost))
+ if (hisi_sas_alloc(hisi_hba, shost)) {
+ hisi_sas_free(hisi_hba);
goto err_out;
+ }
return shost;
err_out:
@@ -270,6 +325,20 @@ err_out_ha:
}
EXPORT_SYMBOL_GPL(hisi_sas_probe);
+int hisi_sas_remove(struct platform_device *pdev)
+{
+ struct sas_ha_struct *sha = platform_get_drvdata(pdev);
+ struct hisi_hba *hisi_hba = sha->lldd_ha;
+
+ scsi_remove_host(sha->core.shost);
+ sas_unregister_ha(sha);
+ sas_remove_host(sha->core.shost);
+
+ hisi_sas_free(hisi_hba);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_remove);
+
static __init int hisi_sas_init(void)
{
pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This patch also includes relevant memory/pool
free'ing and sas/scsi host removal
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 71 ++++++++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 97f5368..b96a2ab 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -126,6 +126,59 @@ err_out:
return -ENOMEM;
}
+static void hisi_sas_free(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int i, s;
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
+ if (hisi_hba->cmd_hdr[i])
+ dma_free_coherent(dev, s,
+ hisi_hba->cmd_hdr[i],
+ hisi_hba->cmd_hdr_dma[i]);
+
+ s = hisi_hba->hw->complete_hdr_size * HISI_SAS_QUEUE_SLOTS;
+ if (hisi_hba->complete_hdr[i])
+ dma_free_coherent(dev, s,
+ hisi_hba->complete_hdr[i],
+ hisi_hba->complete_hdr_dma[i]);
+ }
+
+ dma_pool_destroy(hisi_hba->status_buffer_pool);
+ dma_pool_destroy(hisi_hba->command_table_pool);
+ dma_pool_destroy(hisi_hba->sge_page_pool);
+
+ s = HISI_SAS_MAX_ITCT_ENTRIES * sizeof(struct hisi_sas_itct);
+ if (hisi_hba->itct)
+ dma_free_coherent(dev, s,
+ hisi_hba->itct, hisi_hba->itct_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_iost);
+ if (hisi_hba->iost)
+ dma_free_coherent(dev, s,
+ hisi_hba->iost, hisi_hba->iost_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint);
+ if (hisi_hba->breakpoint)
+ dma_free_coherent(dev, s,
+ hisi_hba->breakpoint,
+ hisi_hba->breakpoint_dma);
+
+
+ s = sizeof(struct hisi_sas_initial_fis) * HISI_SAS_MAX_PHYS;
+ if (hisi_hba->initial_fis)
+ dma_free_coherent(dev, s,
+ hisi_hba->initial_fis,
+ hisi_hba->initial_fis_dma);
+
+ s = HISI_SAS_COMMAND_ENTRIES * sizeof(struct hisi_sas_breakpoint) * 2;
+ if (hisi_hba->sata_breakpoint)
+ dma_free_coherent(dev, s,
+ hisi_hba->sata_breakpoint,
+ hisi_hba->sata_breakpoint_dma);
+
+}
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
@@ -188,8 +241,10 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
if (IS_ERR(hisi_hba->ctrl))
goto err_out;
- if (hisi_sas_alloc(hisi_hba, shost))
+ if (hisi_sas_alloc(hisi_hba, shost)) {
+ hisi_sas_free(hisi_hba);
goto err_out;
+ }
return shost;
err_out:
@@ -270,6 +325,20 @@ err_out_ha:
}
EXPORT_SYMBOL_GPL(hisi_sas_probe);
+int hisi_sas_remove(struct platform_device *pdev)
+{
+ struct sas_ha_struct *sha = platform_get_drvdata(pdev);
+ struct hisi_hba *hisi_hba = sha->lldd_ha;
+
+ scsi_remove_host(sha->core.shost);
+ sas_unregister_ha(sha);
+ sas_remove_host(sha->core.shost);
+
+ hisi_sas_free(hisi_hba);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(hisi_sas_remove);
+
static __init int hisi_sas_init(void)
{
pr_info("hisi_sas: driver version %s\n", DRV_VERSION);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 09/32] scsi: hisi_sas: add slot init code
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add functionality to init slot indexing.
Slot indexing is for the host to track which slots
(or tags) are free and which are used.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 4 ++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 23 +++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6d1b7d8..2cd6771 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -66,6 +66,10 @@ struct hisi_hba {
int n_phy;
+
+ int slot_index_count;
+ unsigned long *slot_index_tags;
+
/* SCSI/SAS glue */
struct sas_ha_struct sha;
struct Scsi_Host *shost;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index b96a2ab..d7e5b66 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -12,6 +12,21 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas"
+static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ clear_bit(slot_idx, bitmap);
+}
+
+static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->slot_index_count; ++i)
+ hisi_sas_slot_index_clear(hisi_hba, i);
+}
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -102,6 +117,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
memset(hisi_hba->breakpoint, 0, s);
+ hisi_hba->slot_index_count = HISI_SAS_COMMAND_ENTRIES;
+ s = hisi_hba->slot_index_count / sizeof(unsigned long);
+ hisi_hba->slot_index_tags = devm_kzalloc(dev, s, GFP_KERNEL);
+ if (!hisi_hba->slot_index_tags)
+ goto err_out;
+
hisi_hba->sge_page_pool = dma_pool_create("status_sge", dev,
sizeof(struct hisi_sas_sge_page), 16, 0);
if (!hisi_hba->sge_page_pool)
@@ -121,6 +142,8 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
goto err_out;
memset(hisi_hba->sata_breakpoint, 0, s);
+ hisi_sas_slot_index_init(hisi_hba);
+
return 0;
err_out:
return -ENOMEM;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 09/32] scsi: hisi_sas: add slot init code
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add functionality to init slot indexing.
Slot indexing is for the host to track which slots
(or tags) are free and which are used.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 4 ++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 23 +++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 6d1b7d8..2cd6771 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -66,6 +66,10 @@ struct hisi_hba {
int n_phy;
+
+ int slot_index_count;
+ unsigned long *slot_index_tags;
+
/* SCSI/SAS glue */
struct sas_ha_struct sha;
struct Scsi_Host *shost;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index b96a2ab..d7e5b66 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -12,6 +12,21 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas"
+static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ clear_bit(slot_idx, bitmap);
+}
+
+static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->slot_index_count; ++i)
+ hisi_sas_slot_index_clear(hisi_hba, i);
+}
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -102,6 +117,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
memset(hisi_hba->breakpoint, 0, s);
+ hisi_hba->slot_index_count = HISI_SAS_COMMAND_ENTRIES;
+ s = hisi_hba->slot_index_count / sizeof(unsigned long);
+ hisi_hba->slot_index_tags = devm_kzalloc(dev, s, GFP_KERNEL);
+ if (!hisi_hba->slot_index_tags)
+ goto err_out;
+
hisi_hba->sge_page_pool = dma_pool_create("status_sge", dev,
sizeof(struct hisi_sas_sge_page), 16, 0);
if (!hisi_hba->sge_page_pool)
@@ -121,6 +142,8 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
goto err_out;
memset(hisi_hba->sata_breakpoint, 0, s);
+ hisi_sas_slot_index_init(hisi_hba);
+
return 0;
err_out:
return -ENOMEM;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Each completion queue has a structure. This is mainly for
passing to irq handler so we know which queue the irq occured
on.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 7 +++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 6 ++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 2cd6771..315fe46 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -45,6 +45,11 @@ struct hisi_sas_port {
struct asd_sas_port sas_port;
};
+struct hisi_sas_cq {
+ struct hisi_hba *hisi_hba;
+ int id;
+};
+
struct hisi_sas_slot {
};
@@ -73,6 +78,8 @@ struct hisi_hba {
/* SCSI/SAS glue */
struct sas_ha_struct sha;
struct Scsi_Host *shost;
+
+ struct hisi_sas_cq cq[HISI_SAS_MAX_QUEUES];
struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d7e5b66..d10bf24 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -58,6 +58,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct device *dev = &pdev->dev;
for (i = 0; i < hisi_hba->queue_count; i++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[i];
+
+ /* Completion queue structure */
+ cq->id = i;
+ cq->hisi_hba = hisi_hba;
+
/* Delivery queue */
s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
hisi_hba->cmd_hdr[i] = dma_alloc_coherent(dev, s,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Each completion queue has a structure. This is mainly for
passing to irq handler so we know which queue the irq occured
on.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 7 +++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 6 ++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 2cd6771..315fe46 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -45,6 +45,11 @@ struct hisi_sas_port {
struct asd_sas_port sas_port;
};
+struct hisi_sas_cq {
+ struct hisi_hba *hisi_hba;
+ int id;
+};
+
struct hisi_sas_slot {
};
@@ -73,6 +78,8 @@ struct hisi_hba {
/* SCSI/SAS glue */
struct sas_ha_struct sha;
struct Scsi_Host *shost;
+
+ struct hisi_sas_cq cq[HISI_SAS_MAX_QUEUES];
struct hisi_sas_phy phy[HISI_SAS_MAX_PHYS];
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d7e5b66..d10bf24 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -58,6 +58,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct device *dev = &pdev->dev;
for (i = 0; i < hisi_hba->queue_count; i++) {
+ struct hisi_sas_cq *cq = &hisi_hba->cq[i];
+
+ /* Completion queue structure */
+ cq->id = i;
+ cq->hisi_hba = hisi_hba;
+
/* Delivery queue */
s = sizeof(struct hisi_sas_cmd_hdr) * HISI_SAS_QUEUE_SLOTS;
hisi_hba->cmd_hdr[i] = dma_alloc_coherent(dev, s,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:05 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
The SAS address for the HBA comes from the device tree.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 12 ++++++++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 315fe46..c50384f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -39,6 +39,7 @@
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
+ u64 dev_sas_addr;
};
struct hisi_sas_port {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d10bf24..8cd1b55 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -281,6 +281,16 @@ err_out:
return NULL;
}
+static void hisi_sas_init_add(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ memcpy(&hisi_hba->phy[i].dev_sas_addr,
+ hisi_hba->sas_addr,
+ SAS_ADDR_SIZE);
+}
+
int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
@@ -334,6 +344,8 @@ int hisi_sas_probe(struct platform_device *pdev,
sha->sas_port[i] = &hisi_hba->port[i].sas_port;
}
+ hisi_sas_init_add(hisi_hba);
+
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
The SAS address for the HBA comes from the device tree.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 12 ++++++++++++
2 files changed, 13 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 315fe46..c50384f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -39,6 +39,7 @@
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
+ u64 dev_sas_addr;
};
struct hisi_sas_port {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d10bf24..8cd1b55 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -281,6 +281,16 @@ err_out:
return NULL;
}
+static void hisi_sas_init_add(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ memcpy(&hisi_hba->phy[i].dev_sas_addr,
+ hisi_hba->sas_addr,
+ SAS_ADDR_SIZE);
+}
+
int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *hw)
{
@@ -334,6 +344,8 @@ int hisi_sas_probe(struct platform_device *pdev,
sha->sas_port[i] = &hisi_hba->port[i].sas_port;
}
+ hisi_sas_init_add(hisi_hba);
+
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 8cd1b55..d7d9516 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -311,6 +311,14 @@ int hisi_sas_probe(struct platform_device *pdev,
sha = SHOST_TO_SAS_HA(shost);
hisi_hba = shost_priv(shost);
platform_set_drvdata(pdev, sha);
+
+ if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) &&
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
+ dev_err(dev, "No usable DMA addressing method\n");
+ rc = -EIO;
+ goto err_out_ha;
+ }
+
phy_nr = port_nr = hisi_hba->n_phy;
arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 8cd1b55..d7d9516 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -311,6 +311,14 @@ int hisi_sas_probe(struct platform_device *pdev,
sha = SHOST_TO_SAS_HA(shost);
hisi_hba = shost_priv(shost);
platform_set_drvdata(pdev, sha);
+
+ if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64)) &&
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32))) {
+ dev_err(dev, "No usable DMA addressing method\n");
+ rc = -EIO;
+ goto err_out_ha;
+ }
+
phy_nr = port_nr = hisi_hba->n_phy;
arr_phy = devm_kcalloc(dev, phy_nr, sizeof(void *), GFP_KERNEL);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index c50384f..62bc6f3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -72,6 +72,7 @@ struct hisi_hba {
int n_phy;
+ struct workqueue_struct *wq;
int slot_index_count;
unsigned long *slot_index_tags;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d7d9516..7f32c6b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -150,6 +150,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
hisi_sas_slot_index_init(hisi_hba);
+ hisi_hba->wq = create_singlethread_workqueue(dev_name(dev));
+ if (!hisi_hba->wq) {
+ dev_err(dev, "sas_alloc: failed to create workqueue\n");
+ goto err_out;
+ }
+
return 0;
err_out:
return -ENOMEM;
@@ -207,6 +213,8 @@ static void hisi_sas_free(struct hisi_hba *hisi_hba)
hisi_hba->sata_breakpoint,
hisi_hba->sata_breakpoint_dma);
+ if (hisi_hba->wq)
+ destroy_workqueue(hisi_hba->wq);
}
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue
@ 2015-11-16 13:05 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:05 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 8 ++++++++
2 files changed, 9 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index c50384f..62bc6f3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -72,6 +72,7 @@ struct hisi_hba {
int n_phy;
+ struct workqueue_struct *wq;
int slot_index_count;
unsigned long *slot_index_tags;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d7d9516..7f32c6b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -150,6 +150,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
hisi_sas_slot_index_init(hisi_hba);
+ hisi_hba->wq = create_singlethread_workqueue(dev_name(dev));
+ if (!hisi_hba->wq) {
+ dev_err(dev, "sas_alloc: failed to create workqueue\n");
+ goto err_out;
+ }
+
return 0;
err_out:
return -ENOMEM;
@@ -207,6 +213,8 @@ static void hisi_sas_free(struct hisi_hba *hisi_hba)
hisi_hba->sata_breakpoint,
hisi_hba->sata_breakpoint_dma);
+ if (hisi_hba->wq)
+ destroy_workqueue(hisi_hba->wq);
}
static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Include initialisation.
Signed-off-by: John Garry <john.garry@huawei.com>
Conflicts:
drivers/scsi/hisi_sas/hisi_sas_main.c
---
drivers/scsi/hisi_sas/hisi_sas.h | 12 ++++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 6 ++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 62bc6f3..5ac5a82 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -37,6 +37,11 @@
#define HISI_SAS_NAME_LEN 32
+
+enum dev_status {
+ HISI_SAS_DEV_NORMAL,
+ HISI_SAS_DEV_EH,
+};
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
u64 dev_sas_addr;
@@ -51,6 +56,12 @@ struct hisi_sas_cq {
int id;
};
+struct hisi_sas_device {
+ enum sas_device_type dev_type;
+ u64 device_id;
+ u8 dev_status;
+};
+
struct hisi_sas_slot {
};
@@ -89,6 +100,7 @@ struct hisi_hba {
char *int_names;
struct dma_pool *sge_page_pool;
+ struct hisi_sas_device devices[HISI_SAS_MAX_DEVICES];
struct dma_pool *command_table_pool;
struct dma_pool *status_buffer_pool;
struct hisi_sas_cmd_hdr *cmd_hdr[HISI_SAS_MAX_QUEUES];
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7f32c6b..21111d4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -57,6 +57,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct platform_device *pdev = hisi_hba->pdev;
struct device *dev = &pdev->dev;
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ hisi_hba->devices[i].dev_type = SAS_PHY_UNUSED;
+ hisi_hba->devices[i].device_id = i;
+ hisi_hba->devices[i].dev_status = HISI_SAS_DEV_NORMAL;
+ }
+
for (i = 0; i < hisi_hba->queue_count; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Include initialisation.
Signed-off-by: John Garry <john.garry@huawei.com>
Conflicts:
drivers/scsi/hisi_sas/hisi_sas_main.c
---
drivers/scsi/hisi_sas/hisi_sas.h | 12 ++++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 6 ++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 62bc6f3..5ac5a82 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -37,6 +37,11 @@
#define HISI_SAS_NAME_LEN 32
+
+enum dev_status {
+ HISI_SAS_DEV_NORMAL,
+ HISI_SAS_DEV_EH,
+};
struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
u64 dev_sas_addr;
@@ -51,6 +56,12 @@ struct hisi_sas_cq {
int id;
};
+struct hisi_sas_device {
+ enum sas_device_type dev_type;
+ u64 device_id;
+ u8 dev_status;
+};
+
struct hisi_sas_slot {
};
@@ -89,6 +100,7 @@ struct hisi_hba {
char *int_names;
struct dma_pool *sge_page_pool;
+ struct hisi_sas_device devices[HISI_SAS_MAX_DEVICES];
struct dma_pool *command_table_pool;
struct dma_pool *status_buffer_pool;
struct hisi_sas_cmd_hdr *cmd_hdr[HISI_SAS_MAX_QUEUES];
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7f32c6b..21111d4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -57,6 +57,12 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct platform_device *pdev = hisi_hba->pdev;
struct device *dev = &pdev->dev;
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ hisi_hba->devices[i].dev_type = SAS_PHY_UNUSED;
+ hisi_hba->devices[i].device_id = i;
+ hisi_hba->devices[i].dev_status = HISI_SAS_DEV_NORMAL;
+ }
+
for (i = 0; i < hisi_hba->queue_count; i++) {
struct hisi_sas_cq *cq = &hisi_hba->cq[i];
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 15/32] scsi: hisi_sas: add phy and port init
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 15 +++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 5ac5a82..3a2400e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -43,12 +43,27 @@ enum dev_status {
HISI_SAS_DEV_EH,
};
struct hisi_sas_phy {
+ struct hisi_hba *hisi_hba;
+ struct hisi_sas_port *port;
struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct timer_list timer;
+ u64 port_id; /* from hw */
u64 dev_sas_addr;
+ u64 phy_type;
+ u64 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ u8 reserved[3];
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
};
struct hisi_sas_port {
struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 id; /* from hw */
+ struct list_head list;
};
struct hisi_sas_cq {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 21111d4..bc41ce4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -27,6 +27,30 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+
+static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ phy->hisi_hba = hisi_hba;
+ phy->port = NULL;
+ init_timer(&phy->timer);
+ sas_phy->enabled = (phy_no < hisi_hba->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+ sas_phy->id = phy_no;
+ sas_phy->sas_addr = &hisi_hba->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)hisi_hba->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+}
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -57,6 +81,13 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct platform_device *pdev = hisi_hba->pdev;
struct device *dev = &pdev->dev;
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_init(hisi_hba, i);
+ hisi_hba->port[i].port_attached = 0;
+ hisi_hba->port[i].id = -1;
+ INIT_LIST_HEAD(&hisi_hba->port[i].list);
+ }
+
for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
hisi_hba->devices[i].dev_type = SAS_PHY_UNUSED;
hisi_hba->devices[i].device_id = i;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 15/32] scsi: hisi_sas: add phy and port init
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 15 +++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 31 +++++++++++++++++++++++++++++++
2 files changed, 46 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 5ac5a82..3a2400e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -43,12 +43,27 @@ enum dev_status {
HISI_SAS_DEV_EH,
};
struct hisi_sas_phy {
+ struct hisi_hba *hisi_hba;
+ struct hisi_sas_port *port;
struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct timer_list timer;
+ u64 port_id; /* from hw */
u64 dev_sas_addr;
+ u64 phy_type;
+ u64 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ u8 reserved[3];
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
};
struct hisi_sas_port {
struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 id; /* from hw */
+ struct list_head list;
};
struct hisi_sas_cq {
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 21111d4..bc41ce4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -27,6 +27,30 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+
+static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ phy->hisi_hba = hisi_hba;
+ phy->port = NULL;
+ init_timer(&phy->timer);
+ sas_phy->enabled = (phy_no < hisi_hba->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+ sas_phy->id = phy_no;
+ sas_phy->sas_addr = &hisi_hba->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)hisi_hba->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+}
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -57,6 +81,13 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct platform_device *pdev = hisi_hba->pdev;
struct device *dev = &pdev->dev;
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_init(hisi_hba, i);
+ hisi_hba->port[i].port_attached = 0;
+ hisi_hba->port[i].id = -1;
+ INIT_LIST_HEAD(&hisi_hba->port[i].list);
+ }
+
for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
hisi_hba->devices[i].dev_type = SAS_PHY_UNUSED;
hisi_hba->devices[i].device_id = i;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 +++
2 files changed, 5 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 3a2400e..3749c46 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -97,7 +97,9 @@ struct hisi_hba {
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
+ spinlock_t lock;
+ struct timer_list timer;
struct workqueue_struct *wq;
int slot_index_count;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index bc41ce4..06b863c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -81,6 +81,7 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct platform_device *pdev = hisi_hba->pdev;
struct device *dev = &pdev->dev;
+ spin_lock_init(&hisi_hba->lock);
for (i = 0; i < hisi_hba->n_phy; i++) {
hisi_sas_phy_init(hisi_hba, i);
hisi_hba->port[i].port_attached = 0;
@@ -275,6 +276,8 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
hisi_hba->shost = shost;
SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+ init_timer(&hisi_hba->timer);
+
sas_addr_prop = of_find_property(np, "sas-addr", NULL);
if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
goto err_out;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 +++
2 files changed, 5 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 3a2400e..3749c46 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -97,7 +97,9 @@ struct hisi_hba {
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
+ spinlock_t lock;
+ struct timer_list timer;
struct workqueue_struct *wq;
int slot_index_count;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index bc41ce4..06b863c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -81,6 +81,7 @@ static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
struct platform_device *pdev = hisi_hba->pdev;
struct device *dev = &pdev->dev;
+ spin_lock_init(&hisi_hba->lock);
for (i = 0; i < hisi_hba->n_phy; i++) {
hisi_sas_phy_init(hisi_hba, i);
hisi_hba->port[i].port_attached = 0;
@@ -275,6 +276,8 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
hisi_hba->shost = shost;
SHOST_TO_SAS_HA(shost) = &hisi_hba->sha;
+ init_timer(&hisi_hba->timer);
+
sas_addr_prop = of_find_property(np, "sas-addr", NULL);
if (!sas_addr_prop || (sas_addr_prop->length != SAS_ADDR_SIZE))
goto err_out;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add module init code for v1 hw.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/Makefile | 1 +
drivers/scsi/hisi_sas/hisi_sas.h | 3 ++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 53 ++++++++++++++++++++++++++++++++++
3 files changed, 57 insertions(+)
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
diff --git a/drivers/scsi/hisi_sas/Makefile b/drivers/scsi/hisi_sas/Makefile
index d86b05e..3e70eae 100644
--- a/drivers/scsi/hisi_sas/Makefile
+++ b/drivers/scsi/hisi_sas/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_main.o
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_v1_hw.o
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 3749c46..72533ca 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -269,5 +269,8 @@ union hisi_sas_command_table {
struct hisi_sas_command_table_smp smp;
struct hisi_sas_command_table_stp stp;
};
+extern int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *ops);
+extern int hisi_sas_remove(struct platform_device *pdev);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
new file mode 100644
index 0000000..e9aebce
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas_v1_hw"
+
+
+struct hisi_sas_complete_v1_hdr {
+ __le32 data;
+};
+static const struct hisi_sas_hw hisi_sas_v1_hw = {
+ .complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
+};
+
+static int hisi_sas_v1_probe(struct platform_device *pdev)
+{
+ return hisi_sas_probe(pdev, &hisi_sas_v1_hw);
+}
+
+static int hisi_sas_v1_remove(struct platform_device *pdev)
+{
+ return hisi_sas_remove(pdev);
+}
+
+static const struct of_device_id sas_v1_of_match[] = {
+ { .compatible = "hisilicon,hip05-sas-v1",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, sas_v1_of_match);
+
+static struct platform_driver hisi_sas_v1_driver = {
+ .probe = hisi_sas_v1_probe,
+ .remove = hisi_sas_v1_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = sas_v1_of_match,
+ },
+};
+
+module_platform_driver(hisi_sas_v1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry@huawei.com>");
+MODULE_DESCRIPTION("HISILICON SAS controller v1 hw driver");
+MODULE_ALIAS("platform:" DRV_NAME);
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add module init code for v1 hw.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/Makefile | 1 +
drivers/scsi/hisi_sas/hisi_sas.h | 3 ++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 53 ++++++++++++++++++++++++++++++++++
3 files changed, 57 insertions(+)
create mode 100644 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
diff --git a/drivers/scsi/hisi_sas/Makefile b/drivers/scsi/hisi_sas/Makefile
index d86b05e..3e70eae 100644
--- a/drivers/scsi/hisi_sas/Makefile
+++ b/drivers/scsi/hisi_sas/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_main.o
+obj-$(CONFIG_SCSI_HISI_SAS) += hisi_sas_v1_hw.o
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 3749c46..72533ca 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -269,5 +269,8 @@ union hisi_sas_command_table {
struct hisi_sas_command_table_smp smp;
struct hisi_sas_command_table_stp stp;
};
+extern int hisi_sas_probe(struct platform_device *pdev,
+ const struct hisi_sas_hw *ops);
+extern int hisi_sas_remove(struct platform_device *pdev);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
new file mode 100644
index 0000000..e9aebce
--- /dev/null
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include "hisi_sas.h"
+#define DRV_NAME "hisi_sas_v1_hw"
+
+
+struct hisi_sas_complete_v1_hdr {
+ __le32 data;
+};
+static const struct hisi_sas_hw hisi_sas_v1_hw = {
+ .complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
+};
+
+static int hisi_sas_v1_probe(struct platform_device *pdev)
+{
+ return hisi_sas_probe(pdev, &hisi_sas_v1_hw);
+}
+
+static int hisi_sas_v1_remove(struct platform_device *pdev)
+{
+ return hisi_sas_remove(pdev);
+}
+
+static const struct of_device_id sas_v1_of_match[] = {
+ { .compatible = "hisilicon,hip05-sas-v1",},
+ {},
+};
+MODULE_DEVICE_TABLE(of, sas_v1_of_match);
+
+static struct platform_driver hisi_sas_v1_driver = {
+ .probe = hisi_sas_v1_probe,
+ .remove = hisi_sas_v1_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = sas_v1_of_match,
+ },
+};
+
+module_platform_driver(hisi_sas_v1_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>");
+MODULE_DESCRIPTION("HISILICON SAS controller v1 hw driver");
+MODULE_ALIAS("platform:" DRV_NAME);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 389 +++++++++++++++++++++++++++++++++
1 file changed, 389 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index e9aebce..9fe89bb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -12,10 +12,399 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas_v1_hw"
+/* global registers need init*/
+#define DLVRY_QUEUE_ENABLE 0x0
+#define IOST_BASE_ADDR_LO 0x8
+#define IOST_BASE_ADDR_HI 0xc
+#define ITCT_BASE_ADDR_LO 0x10
+#define ITCT_BASE_ADDR_HI 0x14
+#define BROKEN_MSG_ADDR_LO 0x18
+#define BROKEN_MSG_ADDR_HI 0x1c
+#define PHY_CONTEXT 0x20
+#define PHY_STATE 0x24
+#define PHY_PORT_NUM_MA 0x28
+#define PORT_STATE 0x2c
+#define PHY_CONN_RATE 0x30
+#define HGC_TRANS_TASK_CNT_LIMIT 0x38
+#define AXI_AHB_CLK_CFG 0x3c
+#define HGC_SAS_TXFAIL_RETRY_CTRL 0x84
+#define HGC_GET_ITV_TIME 0x90
+#define DEVICE_MSG_WORK_MODE 0x94
+#define I_T_NEXUS_LOSS_TIME 0xa0
+#define BUS_INACTIVE_LIMIT_TIME 0xa8
+#define REJECT_TO_OPEN_LIMIT_TIME 0xac
+#define CFG_AGING_TIME 0xbc
+#define CFG_AGING_TIME_ITCT_REL_OFF 0
+#define CFG_AGING_TIME_ITCT_REL_MSK (0x1 << CFG_AGING_TIME_ITCT_REL_OFF)
+#define HGC_DFX_CFG2 0xc0
+#define FIS_LIST_BADDR_L 0xc4
+#define CFG_1US_TIMER_TRSH 0xcc
+#define CFG_SAS_CONFIG 0xd4
+#define HGC_IOST_ECC_ADDR 0x140
+#define HGC_IOST_ECC_ADDR_BAD_OFF 16
+#define HGC_IOST_ECC_ADDR_BAD_MSK (0x3ff << HGC_IOST_ECC_ADDR_BAD_OFF)
+#define HGC_DQ_ECC_ADDR 0x144
+#define HGC_DQ_ECC_ADDR_BAD_OFF 16
+#define HGC_DQ_ECC_ADDR_BAD_MSK (0xfff << HGC_DQ_ECC_ADDR_BAD_OFF)
+#define HGC_INVLD_DQE_INFO 0x148
+#define HGC_INVLD_DQE_INFO_DQ_OFF 0
+#define HGC_INVLD_DQE_INFO_DQ_MSK (0xffff << HGC_INVLD_DQE_INFO_DQ_OFF)
+#define HGC_INVLD_DQE_INFO_TYPE_OFF 16
+#define HGC_INVLD_DQE_INFO_TYPE_MSK (0x1 << HGC_INVLD_DQE_INFO_TYPE_OFF)
+#define HGC_INVLD_DQE_INFO_FORCE_OFF 17
+#define HGC_INVLD_DQE_INFO_FORCE_MSK (0x1 << HGC_INVLD_DQE_INFO_FORCE_OFF)
+#define HGC_INVLD_DQE_INFO_PHY_OFF 18
+#define HGC_INVLD_DQE_INFO_PHY_MSK (0x1 << HGC_INVLD_DQE_INFO_PHY_OFF)
+#define HGC_INVLD_DQE_INFO_ABORT_OFF 19
+#define HGC_INVLD_DQE_INFO_ABORT_MSK (0x1 << HGC_INVLD_DQE_INFO_ABORT_OFF)
+#define HGC_INVLD_DQE_INFO_IPTT_OF_OFF 20
+#define HGC_INVLD_DQE_INFO_IPTT_OF_MSK (0x1 << HGC_INVLD_DQE_INFO_IPTT_OF_OFF)
+#define HGC_INVLD_DQE_INFO_SSP_ERR_OFF 21
+#define HGC_INVLD_DQE_INFO_SSP_ERR_MSK (0x1 << HGC_INVLD_DQE_INFO_SSP_ERR_OFF)
+#define HGC_INVLD_DQE_INFO_OFL_OFF 22
+#define HGC_INVLD_DQE_INFO_OFL_MSK (0x1 << HGC_INVLD_DQE_INFO_OFL_OFF)
+#define HGC_ITCT_ECC_ADDR 0x150
+#define HGC_ITCT_ECC_ADDR_BAD_OFF 16
+#define HGC_ITCT_ECC_ADDR_BAD_MSK (0x3ff << HGC_ITCT_ECC_ADDR_BAD_OFF)
+#define HGC_AXI_FIFO_ERR_INFO 0x154
+#define INT_COAL_EN 0x1bc
+#define OQ_INT_COAL_TIME 0x1c0
+#define OQ_INT_COAL_CNT 0x1c4
+#define ENT_INT_COAL_TIME 0x1c8
+#define ENT_INT_COAL_CNT 0x1cc
+#define OQ_INT_SRC 0x1d0
+#define OQ_INT_SRC_MSK 0x1d4
+#define ENT_INT_SRC1 0x1d8
+#define ENT_INT_SRC2 0x1dc
+#define ENT_INT_SRC2_DQ_CFG_ERR_OFF 25
+#define ENT_INT_SRC2_DQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_DQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_CQ_CFG_ERR_OFF 27
+#define ENT_INT_SRC2_CQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_CQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_AXI_WRONG_INT_OFF 28
+#define ENT_INT_SRC2_AXI_WRONG_INT_MSK (0x1 << ENT_INT_SRC2_AXI_WRONG_INT_OFF)
+#define ENT_INT_SRC2_AXI_OVERLF_INT_OFF 29
+#define ENT_INT_SRC2_AXI_OVERLF_INT_MSK (0x1 << ENT_INT_SRC2_AXI_OVERLF_INT_OFF)
+#define ENT_INT_SRC_MSK1 0x1e0
+#define ENT_INT_SRC_MSK2 0x1e4
+#define SAS_ECC_INTR 0x1e8
+#define SAS_ECC_INTR_DQ_ECC1B_OFF 0
+#define SAS_ECC_INTR_DQ_ECC1B_MSK (0x1 << SAS_ECC_INTR_DQ_ECC1B_OFF)
+#define SAS_ECC_INTR_DQ_ECCBAD_OFF 1
+#define SAS_ECC_INTR_DQ_ECCBAD_MSK (0x1 << SAS_ECC_INTR_DQ_ECCBAD_OFF)
+#define SAS_ECC_INTR_IOST_ECC1B_OFF 2
+#define SAS_ECC_INTR_IOST_ECC1B_MSK (0x1 << SAS_ECC_INTR_IOST_ECC1B_OFF)
+#define SAS_ECC_INTR_IOST_ECCBAD_OFF 3
+#define SAS_ECC_INTR_IOST_ECCBAD_MSK (0x1 << SAS_ECC_INTR_IOST_ECCBAD_OFF)
+#define SAS_ECC_INTR_ITCT_ECC1B_OFF 4
+#define SAS_ECC_INTR_ITCT_ECC1B_MSK (0x1 << SAS_ECC_INTR_ITCT_ECC1B_OFF)
+#define SAS_ECC_INTR_ITCT_ECCBAD_OFF 5
+#define SAS_ECC_INTR_ITCT_ECCBAD_MSK (0x1 << SAS_ECC_INTR_ITCT_ECCBAD_OFF)
+#define SAS_ECC_INTR_MSK 0x1ec
+#define HGC_ERR_STAT_EN 0x238
+#define DLVRY_Q_0_BASE_ADDR_LO 0x260
+#define DLVRY_Q_0_BASE_ADDR_HI 0x264
+#define DLVRY_Q_0_DEPTH 0x268
+#define DLVRY_Q_0_WR_PTR 0x26c
+#define DLVRY_Q_0_RD_PTR 0x270
+#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
+#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
+#define COMPL_Q_0_DEPTH 0x4e8
+#define COMPL_Q_0_WR_PTR 0x4ec
+#define COMPL_Q_0_RD_PTR 0x4f0
+#define HGC_ECC_ERR 0x7d0
+
+/* phy registers need init */
+#define PORT_BASE (0x800)
+
+#define PHY_CFG (PORT_BASE + 0x0)
+#define PHY_CFG_ENA_OFF 0
+#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
+#define PHY_CFG_DC_OPT_OFF 2
+#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
+#define PROG_PHY_LINK_RATE (PORT_BASE + 0xc)
+#define PROG_PHY_LINK_RATE_MAX_OFF 0
+#define PROG_PHY_LINK_RATE_MAX_MSK (0xf << PROG_PHY_LINK_RATE_MAX_OFF)
+#define PROG_PHY_LINK_RATE_MIN_OFF 4
+#define PROG_PHY_LINK_RATE_MIN_MSK (0xf << PROG_PHY_LINK_RATE_MIN_OFF)
+#define PROG_PHY_LINK_RATE_OOB_OFF 8
+#define PROG_PHY_LINK_RATE_OOB_MSK (0xf << PROG_PHY_LINK_RATE_OOB_OFF)
+#define PHY_CTRL (PORT_BASE + 0x14)
+#define PHY_CTRL_RESET_OFF 0
+#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
+#define PHY_RATE_NEGO (PORT_BASE + 0x30)
+#define PHY_PCN (PORT_BASE + 0x44)
+#define SL_TOUT_CFG (PORT_BASE + 0x8c)
+#define SL_CONTROL (PORT_BASE + 0x94)
+#define SL_CONTROL_NOTIFY_EN_OFF 0
+#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
+#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
+#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
+#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
+#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
+#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
+#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
+#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
+#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
+#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
+#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
+#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0)
+#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4)
+#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8)
+#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc)
+#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
+#define DONE_RECEIVED_TIME (PORT_BASE + 0x12c)
+#define CON_CFG_DRIVER (PORT_BASE + 0x130)
+#define PHY_CONFIG2 (PORT_BASE + 0x1a8)
+#define PHY_CONFIG2_FORCE_TXDEEMPH_OFF 3
+#define PHY_CONFIG2_FORCE_TXDEEMPH_MSK (0x1 << PHY_CONFIG2_FORCE_TXDEEMPH_OFF)
+#define PHY_CONFIG2_TX_TRAIN_COMP_OFF 24
+#define PHY_CONFIG2_TX_TRAIN_COMP_MSK (0x1 << PHY_CONFIG2_TX_TRAIN_COMP_OFF)
+#define CHL_INT0 (PORT_BASE + 0x1b0)
+#define CHL_INT0_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT0_SN_FAIL_NGR_OFF 2
+#define CHL_INT0_SN_FAIL_NGR_MSK (0x1 << CHL_INT0_SN_FAIL_NGR_OFF)
+#define CHL_INT0_DWS_LOST_OFF 4
+#define CHL_INT0_DWS_LOST_MSK (0x1 << CHL_INT0_DWS_LOST_OFF)
+#define CHL_INT0_SL_IDAF_FAIL_OFF 10
+#define CHL_INT0_SL_IDAF_FAIL_MSK (0x1 << CHL_INT0_SL_IDAF_FAIL_OFF)
+#define CHL_INT0_ID_TIMEOUT_OFF 11
+#define CHL_INT0_ID_TIMEOUT_MSK (0x1 << CHL_INT0_ID_TIMEOUT_OFF)
+#define CHL_INT0_SL_OPAF_FAIL_OFF 12
+#define CHL_INT0_SL_OPAF_FAIL_MSK (0x1 << CHL_INT0_SL_OPAF_FAIL_OFF)
+#define CHL_INT0_SL_PS_FAIL_OFF 21
+#define CHL_INT0_SL_PS_FAIL_MSK (0x1 << CHL_INT0_SL_PS_FAIL_OFF)
+#define CHL_INT1 (PORT_BASE + 0x1b4)
+#define CHL_INT2 (PORT_BASE + 0x1b8)
+#define CHL_INT2_SL_RX_BC_ACK_OFF 2
+#define CHL_INT2_SL_RX_BC_ACK_MSK (0x1 << CHL_INT2_SL_RX_BC_ACK_OFF)
+#define CHL_INT2_SL_PHY_ENA_OFF 6
+#define CHL_INT2_SL_PHY_ENA_MSK (0x1 << CHL_INT2_SL_PHY_ENA_OFF)
+#define CHL_INT0_MSK (PORT_BASE + 0x1bc)
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT1_MSK (PORT_BASE + 0x1c0)
+#define CHL_INT2_MSK (PORT_BASE + 0x1c4)
+#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
+#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
+#define DMA_TX_STATUS_BUSY_OFF 0
+#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
+#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
+#define DMA_RX_STATUS_BUSY_OFF 0
+#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define AXI_CFG 0x5100
+#define RESET_VALUE 0x7ffff
+
+/* HW dma structures */
+/* Delivery queue header */
+/* dw0 */
+#define CMD_HDR_RESP_REPORT_OFF 5
+#define CMD_HDR_RESP_REPORT_MSK 0x20
+#define CMD_HDR_TLR_CTRL_OFF 6
+#define CMD_HDR_TLR_CTRL_MSK 0xc0
+#define CMD_HDR_PORT_OFF 17
+#define CMD_HDR_PORT_MSK 0xe0000
+#define CMD_HDR_PRIORITY_OFF 27
+#define CMD_HDR_PRIORITY_MSK 0x8000000
+#define CMD_HDR_MODE_OFF 28
+#define CMD_HDR_MODE_MSK 0x10000000
+#define CMD_HDR_CMD_OFF 29
+#define CMD_HDR_CMD_MSK 0xe0000000
+/* dw1 */
+#define CMD_HDR_VERIFY_DTL_OFF 10
+#define CMD_HDR_VERIFY_DTL_MSK 0x400
+#define CMD_HDR_SSP_FRAME_TYPE_OFF 13
+#define CMD_HDR_SSP_FRAME_TYPE_MSK 0xe000
+#define CMD_HDR_DEVICE_ID_OFF 16
+#define CMD_HDR_DEVICE_ID_MSK 0xffff0000
+/* dw2 */
+#define CMD_HDR_CFL_OFF 0
+#define CMD_HDR_CFL_MSK 0x1ff
+#define CMD_HDR_MRFL_OFF 15
+#define CMD_HDR_MRFL_MSK 0xff8000
+#define CMD_HDR_FIRST_BURST_OFF 25
+#define CMD_HDR_FIRST_BURST_MSK 0x2000000
+/* dw3 */
+#define CMD_HDR_IPTT_OFF 0
+#define CMD_HDR_IPTT_MSK 0xffff
+/* dw6 */
+#define CMD_HDR_DATA_SGL_LEN_OFF 16
+#define CMD_HDR_DATA_SGL_LEN_MSK 0xffff0000
+
+/* Completion header */
+#define CMPLT_HDR_IPTT_OFF 0
+#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
+#define CMPLT_HDR_CMD_CMPLT_OFF 17
+#define CMPLT_HDR_CMD_CMPLT_MSK (0x1 << CMPLT_HDR_CMD_CMPLT_OFF)
+#define CMPLT_HDR_ERR_RCRD_XFRD_OFF 18
+#define CMPLT_HDR_ERR_RCRD_XFRD_MSK (0x1 << CMPLT_HDR_ERR_RCRD_XFRD_OFF)
+#define CMPLT_HDR_RSPNS_XFRD_OFF 19
+#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
+#define CMPLT_HDR_IO_CFG_ERR_OFF 27
+#define CMPLT_HDR_IO_CFG_ERR_MSK (0x1 << CMPLT_HDR_IO_CFG_ERR_OFF)
+
+/* ITCT header */
+/* qw0 */
+#define ITCT_HDR_DEV_TYPE_OFF 0
+#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
+#define ITCT_HDR_VALID_OFF 2
+#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
+#define ITCT_HDR_BREAK_REPLY_ENA_OFF 3
+#define ITCT_HDR_BREAK_REPLY_ENA_MSK (0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF)
+#define ITCT_HDR_AWT_CONTROL_OFF 4
+#define ITCT_HDR_AWT_CONTROL_MSK (0x1 << ITCT_HDR_AWT_CONTROL_OFF)
+#define ITCT_HDR_MAX_CONN_RATE_OFF 5
+#define ITCT_HDR_MAX_CONN_RATE_MSK (0xf << ITCT_HDR_MAX_CONN_RATE_OFF)
+#define ITCT_HDR_VALID_LINK_NUM_OFF 9
+#define ITCT_HDR_VALID_LINK_NUM_MSK (0xf << ITCT_HDR_VALID_LINK_NUM_OFF)
+#define ITCT_HDR_PORT_ID_OFF 13
+#define ITCT_HDR_PORT_ID_MSK (0x7 << ITCT_HDR_PORT_ID_OFF)
+#define ITCT_HDR_SMP_TIMEOUT_OFF 16
+#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffff << ITCT_HDR_SMP_TIMEOUT_OFF)
+#define ITCT_HDR_MAX_BURST_BYTES_OFF 16
+#define ITCT_HDR_MAX_BURST_BYTES_MSK (0xffffffff << \
+ ITCT_MAX_BURST_BYTES_OFF)
+/* qw1 */
+#define ITCT_HDR_MAX_SAS_ADDR_OFF 0
+#define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \
+ ITCT_HDR_MAX_SAS_ADDR_OFF)
+/* qw2 */
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffff << \
+ ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
+#define ITCT_HDR_BUS_INACTIVE_TL_OFF 16
+#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffff << \
+ ITCT_HDR_BUS_INACTIVE_TL_OFF)
+#define ITCT_HDR_MAX_CONN_TL_OFF 32
+#define ITCT_HDR_MAX_CONN_TL_MSK (0xffff << \
+ ITCT_HDR_MAX_CONN_TL_OFF)
+#define ITCT_HDR_REJ_OPEN_TL_OFF 48
+#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffff << \
+ ITCT_REJ_OPEN_TL_OFF)
+
+/* Err record header */
+#define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0
+#define ERR_HDR_DMA_TX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_TX_ERR_TYPE_OFF)
+#define ERR_HDR_DMA_RX_ERR_TYPE_OFF 16
+#define ERR_HDR_DMA_RX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_RX_ERR_TYPE_OFF)
struct hisi_sas_complete_v1_hdr {
__le32 data;
};
+
+enum {
+ HISI_SAS_PHY_BCAST_ACK = 0,
+ HISI_SAS_PHY_SL_PHY_ENABLED,
+ HISI_SAS_PHY_INT_ABNORMAL,
+ HISI_SAS_PHY_INT_NR
+};
+
+enum {
+ DMA_TX_ERR_BASE = 0x0,
+ DMA_RX_ERR_BASE = 0x100,
+ TRANS_TX_FAIL_BASE = 0x200,
+ TRANS_RX_FAIL_BASE = 0x300,
+
+ /* dma tx */
+ DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x0 */
+ DMA_TX_DIF_APP_ERR, /* 0x1 */
+ DMA_TX_DIF_RPP_ERR, /* 0x2 */
+ DMA_TX_AXI_BUS_ERR, /* 0x3 */
+ DMA_TX_DATA_SGL_OVERFLOW_ERR, /* 0x4 */
+ DMA_TX_DIF_SGL_OVERFLOW_ERR, /* 0x5 */
+ DMA_TX_UNEXP_XFER_RDY_ERR, /* 0x6 */
+ DMA_TX_XFER_RDY_OFFSET_ERR, /* 0x7 */
+ DMA_TX_DATA_UNDERFLOW_ERR, /* 0x8 */
+ DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR, /* 0x9 */
+
+ /* dma rx */
+ DMA_RX_BUFFER_ECC_ERR = DMA_RX_ERR_BASE, /* 0x100 */
+ DMA_RX_DIF_CRC_ERR, /* 0x101 */
+ DMA_RX_DIF_APP_ERR, /* 0x102 */
+ DMA_RX_DIF_RPP_ERR, /* 0x103 */
+ DMA_RX_RESP_BUFFER_OVERFLOW_ERR, /* 0x104 */
+ DMA_RX_AXI_BUS_ERR, /* 0x105 */
+ DMA_RX_DATA_SGL_OVERFLOW_ERR, /* 0x106 */
+ DMA_RX_DIF_SGL_OVERFLOW_ERR, /* 0x107 */
+ DMA_RX_DATA_OFFSET_ERR, /* 0x108 */
+ DMA_RX_UNEXP_RX_DATA_ERR, /* 0x109 */
+ DMA_RX_DATA_OVERFLOW_ERR, /* 0x10a */
+ DMA_RX_DATA_UNDERFLOW_ERR, /* 0x10b */
+ DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x10c */
+
+ /* trans tx */
+ TRANS_TX_RSVD0_ERR = TRANS_TX_FAIL_BASE, /* 0x200 */
+ TRANS_TX_PHY_NOT_ENABLE_ERR, /* 0x201 */
+ TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR, /* 0x202 */
+ TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR, /* 0x203 */
+ TRANS_TX_OPEN_REJCT_BY_OTHER_ERR, /* 0x204 */
+ TRANS_TX_RSVD1_ERR, /* 0x205 */
+ TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR, /* 0x206 */
+ TRANS_TX_OPEN_REJCT_STP_BUSY_ERR, /* 0x207 */
+ TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR, /* 0x208 */
+ TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR, /* 0x209 */
+ TRANS_TX_OPEN_REJCT_BAD_DEST_ERR, /* 0x20a */
+ TRANS_TX_OPEN_BREAK_RECEIVE_ERR, /* 0x20b */
+ TRANS_TX_LOW_PHY_POWER_ERR, /* 0x20c */
+ TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR, /* 0x20d */
+ TRANS_TX_OPEN_TIMEOUT_ERR, /* 0x20e */
+ TRANS_TX_OPEN_REJCT_NO_DEST_ERR, /* 0x20f */
+ TRANS_TX_OPEN_RETRY_ERR, /* 0x210 */
+ TRANS_TX_RSVD2_ERR, /* 0x211 */
+ TRANS_TX_BREAK_TIMEOUT_ERR, /* 0x212 */
+ TRANS_TX_BREAK_REQUEST_ERR, /* 0x213 */
+ TRANS_TX_BREAK_RECEIVE_ERR, /* 0x214 */
+ TRANS_TX_CLOSE_TIMEOUT_ERR, /* 0x215 */
+ TRANS_TX_CLOSE_NORMAL_ERR, /* 0x216 */
+ TRANS_TX_CLOSE_PHYRESET_ERR, /* 0x217 */
+ TRANS_TX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x218 */
+ TRANS_TX_WITH_CLOSE_COMINIT_ERR, /* 0x219 */
+ TRANS_TX_NAK_RECEIVE_ERR, /* 0x21a */
+ TRANS_TX_ACK_NAK_TIMEOUT_ERR, /* 0x21b */
+ TRANS_TX_CREDIT_TIMEOUT_ERR, /* 0x21c */
+ TRANS_TX_IPTT_CONFLICT_ERR, /* 0x21d */
+ TRANS_TX_TXFRM_TYPE_ERR, /* 0x21e */
+ TRANS_TX_TXSMP_LENGTH_ERR, /* 0x21f */
+
+ /* trans rx */
+ TRANS_RX_FRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x300 */
+ TRANS_RX_FRAME_DONE_ERR, /* 0x301 */
+ TRANS_RX_FRAME_ERRPRM_ERR, /* 0x302 */
+ TRANS_RX_FRAME_NO_CREDIT_ERR, /* 0x303 */
+ TRANS_RX_RSVD0_ERR, /* 0x304 */
+ TRANS_RX_FRAME_OVERRUN_ERR, /* 0x305 */
+ TRANS_RX_FRAME_NO_EOF_ERR, /* 0x306 */
+ TRANS_RX_LINK_BUF_OVERRUN_ERR, /* 0x307 */
+ TRANS_RX_BREAK_TIMEOUT_ERR, /* 0x308 */
+ TRANS_RX_BREAK_REQUEST_ERR, /* 0x309 */
+ TRANS_RX_BREAK_RECEIVE_ERR, /* 0x30a */
+ TRANS_RX_CLOSE_TIMEOUT_ERR, /* 0x30b */
+ TRANS_RX_CLOSE_NORMAL_ERR, /* 0x30c */
+ TRANS_RX_CLOSE_PHYRESET_ERR, /* 0x30d */
+ TRANS_RX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x30e */
+ TRANS_RX_WITH_CLOSE_COMINIT_ERR, /* 0x30f */
+ TRANS_RX_DATA_LENGTH0_ERR, /* 0x310 */
+ TRANS_RX_BAD_HASH_ERR, /* 0x311 */
+ TRANS_RX_XRDY_ZERO_ERR, /* 0x312 */
+ TRANS_RX_SSP_FRAME_LEN_ERR, /* 0x313 */
+ TRANS_RX_TRANS_RX_RSVD1_ERR, /* 0x314 */
+ TRANS_RX_NO_BALANCE_ERR, /* 0x315 */
+ TRANS_RX_TRANS_RX_RSVD2_ERR, /* 0x316 */
+ TRANS_RX_TRANS_RX_RSVD3_ERR, /* 0x317 */
+ TRANS_RX_BAD_FRAME_TYPE_ERR, /* 0x318 */
+ TRANS_RX_SMP_FRAME_LEN_ERR, /* 0x319 */
+ TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x31a */
+};
+
+#define HISI_SAS_PHY_MAX_INT_NR (HISI_SAS_PHY_INT_NR * HISI_SAS_MAX_PHYS)
+#define HISI_SAS_CQ_MAX_INT_NR (HISI_SAS_MAX_QUEUES)
+#define HISI_SAS_FATAL_INT_NR (2)
+
+#define HISI_SAS_MAX_INT_NR \
+ (HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
+ HISI_SAS_FATAL_INT_NR)
+
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 389 +++++++++++++++++++++++++++++++++
1 file changed, 389 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index e9aebce..9fe89bb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -12,10 +12,399 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas_v1_hw"
+/* global registers need init*/
+#define DLVRY_QUEUE_ENABLE 0x0
+#define IOST_BASE_ADDR_LO 0x8
+#define IOST_BASE_ADDR_HI 0xc
+#define ITCT_BASE_ADDR_LO 0x10
+#define ITCT_BASE_ADDR_HI 0x14
+#define BROKEN_MSG_ADDR_LO 0x18
+#define BROKEN_MSG_ADDR_HI 0x1c
+#define PHY_CONTEXT 0x20
+#define PHY_STATE 0x24
+#define PHY_PORT_NUM_MA 0x28
+#define PORT_STATE 0x2c
+#define PHY_CONN_RATE 0x30
+#define HGC_TRANS_TASK_CNT_LIMIT 0x38
+#define AXI_AHB_CLK_CFG 0x3c
+#define HGC_SAS_TXFAIL_RETRY_CTRL 0x84
+#define HGC_GET_ITV_TIME 0x90
+#define DEVICE_MSG_WORK_MODE 0x94
+#define I_T_NEXUS_LOSS_TIME 0xa0
+#define BUS_INACTIVE_LIMIT_TIME 0xa8
+#define REJECT_TO_OPEN_LIMIT_TIME 0xac
+#define CFG_AGING_TIME 0xbc
+#define CFG_AGING_TIME_ITCT_REL_OFF 0
+#define CFG_AGING_TIME_ITCT_REL_MSK (0x1 << CFG_AGING_TIME_ITCT_REL_OFF)
+#define HGC_DFX_CFG2 0xc0
+#define FIS_LIST_BADDR_L 0xc4
+#define CFG_1US_TIMER_TRSH 0xcc
+#define CFG_SAS_CONFIG 0xd4
+#define HGC_IOST_ECC_ADDR 0x140
+#define HGC_IOST_ECC_ADDR_BAD_OFF 16
+#define HGC_IOST_ECC_ADDR_BAD_MSK (0x3ff << HGC_IOST_ECC_ADDR_BAD_OFF)
+#define HGC_DQ_ECC_ADDR 0x144
+#define HGC_DQ_ECC_ADDR_BAD_OFF 16
+#define HGC_DQ_ECC_ADDR_BAD_MSK (0xfff << HGC_DQ_ECC_ADDR_BAD_OFF)
+#define HGC_INVLD_DQE_INFO 0x148
+#define HGC_INVLD_DQE_INFO_DQ_OFF 0
+#define HGC_INVLD_DQE_INFO_DQ_MSK (0xffff << HGC_INVLD_DQE_INFO_DQ_OFF)
+#define HGC_INVLD_DQE_INFO_TYPE_OFF 16
+#define HGC_INVLD_DQE_INFO_TYPE_MSK (0x1 << HGC_INVLD_DQE_INFO_TYPE_OFF)
+#define HGC_INVLD_DQE_INFO_FORCE_OFF 17
+#define HGC_INVLD_DQE_INFO_FORCE_MSK (0x1 << HGC_INVLD_DQE_INFO_FORCE_OFF)
+#define HGC_INVLD_DQE_INFO_PHY_OFF 18
+#define HGC_INVLD_DQE_INFO_PHY_MSK (0x1 << HGC_INVLD_DQE_INFO_PHY_OFF)
+#define HGC_INVLD_DQE_INFO_ABORT_OFF 19
+#define HGC_INVLD_DQE_INFO_ABORT_MSK (0x1 << HGC_INVLD_DQE_INFO_ABORT_OFF)
+#define HGC_INVLD_DQE_INFO_IPTT_OF_OFF 20
+#define HGC_INVLD_DQE_INFO_IPTT_OF_MSK (0x1 << HGC_INVLD_DQE_INFO_IPTT_OF_OFF)
+#define HGC_INVLD_DQE_INFO_SSP_ERR_OFF 21
+#define HGC_INVLD_DQE_INFO_SSP_ERR_MSK (0x1 << HGC_INVLD_DQE_INFO_SSP_ERR_OFF)
+#define HGC_INVLD_DQE_INFO_OFL_OFF 22
+#define HGC_INVLD_DQE_INFO_OFL_MSK (0x1 << HGC_INVLD_DQE_INFO_OFL_OFF)
+#define HGC_ITCT_ECC_ADDR 0x150
+#define HGC_ITCT_ECC_ADDR_BAD_OFF 16
+#define HGC_ITCT_ECC_ADDR_BAD_MSK (0x3ff << HGC_ITCT_ECC_ADDR_BAD_OFF)
+#define HGC_AXI_FIFO_ERR_INFO 0x154
+#define INT_COAL_EN 0x1bc
+#define OQ_INT_COAL_TIME 0x1c0
+#define OQ_INT_COAL_CNT 0x1c4
+#define ENT_INT_COAL_TIME 0x1c8
+#define ENT_INT_COAL_CNT 0x1cc
+#define OQ_INT_SRC 0x1d0
+#define OQ_INT_SRC_MSK 0x1d4
+#define ENT_INT_SRC1 0x1d8
+#define ENT_INT_SRC2 0x1dc
+#define ENT_INT_SRC2_DQ_CFG_ERR_OFF 25
+#define ENT_INT_SRC2_DQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_DQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_CQ_CFG_ERR_OFF 27
+#define ENT_INT_SRC2_CQ_CFG_ERR_MSK (0x1 << ENT_INT_SRC2_CQ_CFG_ERR_OFF)
+#define ENT_INT_SRC2_AXI_WRONG_INT_OFF 28
+#define ENT_INT_SRC2_AXI_WRONG_INT_MSK (0x1 << ENT_INT_SRC2_AXI_WRONG_INT_OFF)
+#define ENT_INT_SRC2_AXI_OVERLF_INT_OFF 29
+#define ENT_INT_SRC2_AXI_OVERLF_INT_MSK (0x1 << ENT_INT_SRC2_AXI_OVERLF_INT_OFF)
+#define ENT_INT_SRC_MSK1 0x1e0
+#define ENT_INT_SRC_MSK2 0x1e4
+#define SAS_ECC_INTR 0x1e8
+#define SAS_ECC_INTR_DQ_ECC1B_OFF 0
+#define SAS_ECC_INTR_DQ_ECC1B_MSK (0x1 << SAS_ECC_INTR_DQ_ECC1B_OFF)
+#define SAS_ECC_INTR_DQ_ECCBAD_OFF 1
+#define SAS_ECC_INTR_DQ_ECCBAD_MSK (0x1 << SAS_ECC_INTR_DQ_ECCBAD_OFF)
+#define SAS_ECC_INTR_IOST_ECC1B_OFF 2
+#define SAS_ECC_INTR_IOST_ECC1B_MSK (0x1 << SAS_ECC_INTR_IOST_ECC1B_OFF)
+#define SAS_ECC_INTR_IOST_ECCBAD_OFF 3
+#define SAS_ECC_INTR_IOST_ECCBAD_MSK (0x1 << SAS_ECC_INTR_IOST_ECCBAD_OFF)
+#define SAS_ECC_INTR_ITCT_ECC1B_OFF 4
+#define SAS_ECC_INTR_ITCT_ECC1B_MSK (0x1 << SAS_ECC_INTR_ITCT_ECC1B_OFF)
+#define SAS_ECC_INTR_ITCT_ECCBAD_OFF 5
+#define SAS_ECC_INTR_ITCT_ECCBAD_MSK (0x1 << SAS_ECC_INTR_ITCT_ECCBAD_OFF)
+#define SAS_ECC_INTR_MSK 0x1ec
+#define HGC_ERR_STAT_EN 0x238
+#define DLVRY_Q_0_BASE_ADDR_LO 0x260
+#define DLVRY_Q_0_BASE_ADDR_HI 0x264
+#define DLVRY_Q_0_DEPTH 0x268
+#define DLVRY_Q_0_WR_PTR 0x26c
+#define DLVRY_Q_0_RD_PTR 0x270
+#define COMPL_Q_0_BASE_ADDR_LO 0x4e0
+#define COMPL_Q_0_BASE_ADDR_HI 0x4e4
+#define COMPL_Q_0_DEPTH 0x4e8
+#define COMPL_Q_0_WR_PTR 0x4ec
+#define COMPL_Q_0_RD_PTR 0x4f0
+#define HGC_ECC_ERR 0x7d0
+
+/* phy registers need init */
+#define PORT_BASE (0x800)
+
+#define PHY_CFG (PORT_BASE + 0x0)
+#define PHY_CFG_ENA_OFF 0
+#define PHY_CFG_ENA_MSK (0x1 << PHY_CFG_ENA_OFF)
+#define PHY_CFG_DC_OPT_OFF 2
+#define PHY_CFG_DC_OPT_MSK (0x1 << PHY_CFG_DC_OPT_OFF)
+#define PROG_PHY_LINK_RATE (PORT_BASE + 0xc)
+#define PROG_PHY_LINK_RATE_MAX_OFF 0
+#define PROG_PHY_LINK_RATE_MAX_MSK (0xf << PROG_PHY_LINK_RATE_MAX_OFF)
+#define PROG_PHY_LINK_RATE_MIN_OFF 4
+#define PROG_PHY_LINK_RATE_MIN_MSK (0xf << PROG_PHY_LINK_RATE_MIN_OFF)
+#define PROG_PHY_LINK_RATE_OOB_OFF 8
+#define PROG_PHY_LINK_RATE_OOB_MSK (0xf << PROG_PHY_LINK_RATE_OOB_OFF)
+#define PHY_CTRL (PORT_BASE + 0x14)
+#define PHY_CTRL_RESET_OFF 0
+#define PHY_CTRL_RESET_MSK (0x1 << PHY_CTRL_RESET_OFF)
+#define PHY_RATE_NEGO (PORT_BASE + 0x30)
+#define PHY_PCN (PORT_BASE + 0x44)
+#define SL_TOUT_CFG (PORT_BASE + 0x8c)
+#define SL_CONTROL (PORT_BASE + 0x94)
+#define SL_CONTROL_NOTIFY_EN_OFF 0
+#define SL_CONTROL_NOTIFY_EN_MSK (0x1 << SL_CONTROL_NOTIFY_EN_OFF)
+#define TX_ID_DWORD0 (PORT_BASE + 0x9c)
+#define TX_ID_DWORD1 (PORT_BASE + 0xa0)
+#define TX_ID_DWORD2 (PORT_BASE + 0xa4)
+#define TX_ID_DWORD3 (PORT_BASE + 0xa8)
+#define TX_ID_DWORD4 (PORT_BASE + 0xaC)
+#define TX_ID_DWORD5 (PORT_BASE + 0xb0)
+#define TX_ID_DWORD6 (PORT_BASE + 0xb4)
+#define RX_IDAF_DWORD0 (PORT_BASE + 0xc4)
+#define RX_IDAF_DWORD1 (PORT_BASE + 0xc8)
+#define RX_IDAF_DWORD2 (PORT_BASE + 0xcc)
+#define RX_IDAF_DWORD3 (PORT_BASE + 0xd0)
+#define RX_IDAF_DWORD4 (PORT_BASE + 0xd4)
+#define RX_IDAF_DWORD5 (PORT_BASE + 0xd8)
+#define RX_IDAF_DWORD6 (PORT_BASE + 0xdc)
+#define RXOP_CHECK_CFG_H (PORT_BASE + 0xfc)
+#define DONE_RECEIVED_TIME (PORT_BASE + 0x12c)
+#define CON_CFG_DRIVER (PORT_BASE + 0x130)
+#define PHY_CONFIG2 (PORT_BASE + 0x1a8)
+#define PHY_CONFIG2_FORCE_TXDEEMPH_OFF 3
+#define PHY_CONFIG2_FORCE_TXDEEMPH_MSK (0x1 << PHY_CONFIG2_FORCE_TXDEEMPH_OFF)
+#define PHY_CONFIG2_TX_TRAIN_COMP_OFF 24
+#define PHY_CONFIG2_TX_TRAIN_COMP_MSK (0x1 << PHY_CONFIG2_TX_TRAIN_COMP_OFF)
+#define CHL_INT0 (PORT_BASE + 0x1b0)
+#define CHL_INT0_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT0_SN_FAIL_NGR_OFF 2
+#define CHL_INT0_SN_FAIL_NGR_MSK (0x1 << CHL_INT0_SN_FAIL_NGR_OFF)
+#define CHL_INT0_DWS_LOST_OFF 4
+#define CHL_INT0_DWS_LOST_MSK (0x1 << CHL_INT0_DWS_LOST_OFF)
+#define CHL_INT0_SL_IDAF_FAIL_OFF 10
+#define CHL_INT0_SL_IDAF_FAIL_MSK (0x1 << CHL_INT0_SL_IDAF_FAIL_OFF)
+#define CHL_INT0_ID_TIMEOUT_OFF 11
+#define CHL_INT0_ID_TIMEOUT_MSK (0x1 << CHL_INT0_ID_TIMEOUT_OFF)
+#define CHL_INT0_SL_OPAF_FAIL_OFF 12
+#define CHL_INT0_SL_OPAF_FAIL_MSK (0x1 << CHL_INT0_SL_OPAF_FAIL_OFF)
+#define CHL_INT0_SL_PS_FAIL_OFF 21
+#define CHL_INT0_SL_PS_FAIL_MSK (0x1 << CHL_INT0_SL_PS_FAIL_OFF)
+#define CHL_INT1 (PORT_BASE + 0x1b4)
+#define CHL_INT2 (PORT_BASE + 0x1b8)
+#define CHL_INT2_SL_RX_BC_ACK_OFF 2
+#define CHL_INT2_SL_RX_BC_ACK_MSK (0x1 << CHL_INT2_SL_RX_BC_ACK_OFF)
+#define CHL_INT2_SL_PHY_ENA_OFF 6
+#define CHL_INT2_SL_PHY_ENA_MSK (0x1 << CHL_INT2_SL_PHY_ENA_OFF)
+#define CHL_INT0_MSK (PORT_BASE + 0x1bc)
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF 0
+#define CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK (0x1 << CHL_INT0_MSK_PHYCTRL_NOTRDY_OFF)
+#define CHL_INT1_MSK (PORT_BASE + 0x1c0)
+#define CHL_INT2_MSK (PORT_BASE + 0x1c4)
+#define CHL_INT_COAL_EN (PORT_BASE + 0x1d0)
+#define DMA_TX_STATUS (PORT_BASE + 0x2d0)
+#define DMA_TX_STATUS_BUSY_OFF 0
+#define DMA_TX_STATUS_BUSY_MSK (0x1 << DMA_TX_STATUS_BUSY_OFF)
+#define DMA_RX_STATUS (PORT_BASE + 0x2e8)
+#define DMA_RX_STATUS_BUSY_OFF 0
+#define DMA_RX_STATUS_BUSY_MSK (0x1 << DMA_RX_STATUS_BUSY_OFF)
+
+#define AXI_CFG 0x5100
+#define RESET_VALUE 0x7ffff
+
+/* HW dma structures */
+/* Delivery queue header */
+/* dw0 */
+#define CMD_HDR_RESP_REPORT_OFF 5
+#define CMD_HDR_RESP_REPORT_MSK 0x20
+#define CMD_HDR_TLR_CTRL_OFF 6
+#define CMD_HDR_TLR_CTRL_MSK 0xc0
+#define CMD_HDR_PORT_OFF 17
+#define CMD_HDR_PORT_MSK 0xe0000
+#define CMD_HDR_PRIORITY_OFF 27
+#define CMD_HDR_PRIORITY_MSK 0x8000000
+#define CMD_HDR_MODE_OFF 28
+#define CMD_HDR_MODE_MSK 0x10000000
+#define CMD_HDR_CMD_OFF 29
+#define CMD_HDR_CMD_MSK 0xe0000000
+/* dw1 */
+#define CMD_HDR_VERIFY_DTL_OFF 10
+#define CMD_HDR_VERIFY_DTL_MSK 0x400
+#define CMD_HDR_SSP_FRAME_TYPE_OFF 13
+#define CMD_HDR_SSP_FRAME_TYPE_MSK 0xe000
+#define CMD_HDR_DEVICE_ID_OFF 16
+#define CMD_HDR_DEVICE_ID_MSK 0xffff0000
+/* dw2 */
+#define CMD_HDR_CFL_OFF 0
+#define CMD_HDR_CFL_MSK 0x1ff
+#define CMD_HDR_MRFL_OFF 15
+#define CMD_HDR_MRFL_MSK 0xff8000
+#define CMD_HDR_FIRST_BURST_OFF 25
+#define CMD_HDR_FIRST_BURST_MSK 0x2000000
+/* dw3 */
+#define CMD_HDR_IPTT_OFF 0
+#define CMD_HDR_IPTT_MSK 0xffff
+/* dw6 */
+#define CMD_HDR_DATA_SGL_LEN_OFF 16
+#define CMD_HDR_DATA_SGL_LEN_MSK 0xffff0000
+
+/* Completion header */
+#define CMPLT_HDR_IPTT_OFF 0
+#define CMPLT_HDR_IPTT_MSK (0xffff << CMPLT_HDR_IPTT_OFF)
+#define CMPLT_HDR_CMD_CMPLT_OFF 17
+#define CMPLT_HDR_CMD_CMPLT_MSK (0x1 << CMPLT_HDR_CMD_CMPLT_OFF)
+#define CMPLT_HDR_ERR_RCRD_XFRD_OFF 18
+#define CMPLT_HDR_ERR_RCRD_XFRD_MSK (0x1 << CMPLT_HDR_ERR_RCRD_XFRD_OFF)
+#define CMPLT_HDR_RSPNS_XFRD_OFF 19
+#define CMPLT_HDR_RSPNS_XFRD_MSK (0x1 << CMPLT_HDR_RSPNS_XFRD_OFF)
+#define CMPLT_HDR_IO_CFG_ERR_OFF 27
+#define CMPLT_HDR_IO_CFG_ERR_MSK (0x1 << CMPLT_HDR_IO_CFG_ERR_OFF)
+
+/* ITCT header */
+/* qw0 */
+#define ITCT_HDR_DEV_TYPE_OFF 0
+#define ITCT_HDR_DEV_TYPE_MSK (0x3 << ITCT_HDR_DEV_TYPE_OFF)
+#define ITCT_HDR_VALID_OFF 2
+#define ITCT_HDR_VALID_MSK (0x1 << ITCT_HDR_VALID_OFF)
+#define ITCT_HDR_BREAK_REPLY_ENA_OFF 3
+#define ITCT_HDR_BREAK_REPLY_ENA_MSK (0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF)
+#define ITCT_HDR_AWT_CONTROL_OFF 4
+#define ITCT_HDR_AWT_CONTROL_MSK (0x1 << ITCT_HDR_AWT_CONTROL_OFF)
+#define ITCT_HDR_MAX_CONN_RATE_OFF 5
+#define ITCT_HDR_MAX_CONN_RATE_MSK (0xf << ITCT_HDR_MAX_CONN_RATE_OFF)
+#define ITCT_HDR_VALID_LINK_NUM_OFF 9
+#define ITCT_HDR_VALID_LINK_NUM_MSK (0xf << ITCT_HDR_VALID_LINK_NUM_OFF)
+#define ITCT_HDR_PORT_ID_OFF 13
+#define ITCT_HDR_PORT_ID_MSK (0x7 << ITCT_HDR_PORT_ID_OFF)
+#define ITCT_HDR_SMP_TIMEOUT_OFF 16
+#define ITCT_HDR_SMP_TIMEOUT_MSK (0xffff << ITCT_HDR_SMP_TIMEOUT_OFF)
+#define ITCT_HDR_MAX_BURST_BYTES_OFF 16
+#define ITCT_HDR_MAX_BURST_BYTES_MSK (0xffffffff << \
+ ITCT_MAX_BURST_BYTES_OFF)
+/* qw1 */
+#define ITCT_HDR_MAX_SAS_ADDR_OFF 0
+#define ITCT_HDR_MAX_SAS_ADDR_MSK (0xffffffffffffffff << \
+ ITCT_HDR_MAX_SAS_ADDR_OFF)
+/* qw2 */
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF 0
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK (0xffff << \
+ ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
+#define ITCT_HDR_BUS_INACTIVE_TL_OFF 16
+#define ITCT_HDR_BUS_INACTIVE_TL_MSK (0xffff << \
+ ITCT_HDR_BUS_INACTIVE_TL_OFF)
+#define ITCT_HDR_MAX_CONN_TL_OFF 32
+#define ITCT_HDR_MAX_CONN_TL_MSK (0xffff << \
+ ITCT_HDR_MAX_CONN_TL_OFF)
+#define ITCT_HDR_REJ_OPEN_TL_OFF 48
+#define ITCT_HDR_REJ_OPEN_TL_MSK (0xffff << \
+ ITCT_REJ_OPEN_TL_OFF)
+
+/* Err record header */
+#define ERR_HDR_DMA_TX_ERR_TYPE_OFF 0
+#define ERR_HDR_DMA_TX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_TX_ERR_TYPE_OFF)
+#define ERR_HDR_DMA_RX_ERR_TYPE_OFF 16
+#define ERR_HDR_DMA_RX_ERR_TYPE_MSK (0xffff << ERR_HDR_DMA_RX_ERR_TYPE_OFF)
struct hisi_sas_complete_v1_hdr {
__le32 data;
};
+
+enum {
+ HISI_SAS_PHY_BCAST_ACK = 0,
+ HISI_SAS_PHY_SL_PHY_ENABLED,
+ HISI_SAS_PHY_INT_ABNORMAL,
+ HISI_SAS_PHY_INT_NR
+};
+
+enum {
+ DMA_TX_ERR_BASE = 0x0,
+ DMA_RX_ERR_BASE = 0x100,
+ TRANS_TX_FAIL_BASE = 0x200,
+ TRANS_RX_FAIL_BASE = 0x300,
+
+ /* dma tx */
+ DMA_TX_DIF_CRC_ERR = DMA_TX_ERR_BASE, /* 0x0 */
+ DMA_TX_DIF_APP_ERR, /* 0x1 */
+ DMA_TX_DIF_RPP_ERR, /* 0x2 */
+ DMA_TX_AXI_BUS_ERR, /* 0x3 */
+ DMA_TX_DATA_SGL_OVERFLOW_ERR, /* 0x4 */
+ DMA_TX_DIF_SGL_OVERFLOW_ERR, /* 0x5 */
+ DMA_TX_UNEXP_XFER_RDY_ERR, /* 0x6 */
+ DMA_TX_XFER_RDY_OFFSET_ERR, /* 0x7 */
+ DMA_TX_DATA_UNDERFLOW_ERR, /* 0x8 */
+ DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR, /* 0x9 */
+
+ /* dma rx */
+ DMA_RX_BUFFER_ECC_ERR = DMA_RX_ERR_BASE, /* 0x100 */
+ DMA_RX_DIF_CRC_ERR, /* 0x101 */
+ DMA_RX_DIF_APP_ERR, /* 0x102 */
+ DMA_RX_DIF_RPP_ERR, /* 0x103 */
+ DMA_RX_RESP_BUFFER_OVERFLOW_ERR, /* 0x104 */
+ DMA_RX_AXI_BUS_ERR, /* 0x105 */
+ DMA_RX_DATA_SGL_OVERFLOW_ERR, /* 0x106 */
+ DMA_RX_DIF_SGL_OVERFLOW_ERR, /* 0x107 */
+ DMA_RX_DATA_OFFSET_ERR, /* 0x108 */
+ DMA_RX_UNEXP_RX_DATA_ERR, /* 0x109 */
+ DMA_RX_DATA_OVERFLOW_ERR, /* 0x10a */
+ DMA_RX_DATA_UNDERFLOW_ERR, /* 0x10b */
+ DMA_RX_UNEXP_RETRANS_RESP_ERR, /* 0x10c */
+
+ /* trans tx */
+ TRANS_TX_RSVD0_ERR = TRANS_TX_FAIL_BASE, /* 0x200 */
+ TRANS_TX_PHY_NOT_ENABLE_ERR, /* 0x201 */
+ TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR, /* 0x202 */
+ TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR, /* 0x203 */
+ TRANS_TX_OPEN_REJCT_BY_OTHER_ERR, /* 0x204 */
+ TRANS_TX_RSVD1_ERR, /* 0x205 */
+ TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR, /* 0x206 */
+ TRANS_TX_OPEN_REJCT_STP_BUSY_ERR, /* 0x207 */
+ TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR, /* 0x208 */
+ TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR, /* 0x209 */
+ TRANS_TX_OPEN_REJCT_BAD_DEST_ERR, /* 0x20a */
+ TRANS_TX_OPEN_BREAK_RECEIVE_ERR, /* 0x20b */
+ TRANS_TX_LOW_PHY_POWER_ERR, /* 0x20c */
+ TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR, /* 0x20d */
+ TRANS_TX_OPEN_TIMEOUT_ERR, /* 0x20e */
+ TRANS_TX_OPEN_REJCT_NO_DEST_ERR, /* 0x20f */
+ TRANS_TX_OPEN_RETRY_ERR, /* 0x210 */
+ TRANS_TX_RSVD2_ERR, /* 0x211 */
+ TRANS_TX_BREAK_TIMEOUT_ERR, /* 0x212 */
+ TRANS_TX_BREAK_REQUEST_ERR, /* 0x213 */
+ TRANS_TX_BREAK_RECEIVE_ERR, /* 0x214 */
+ TRANS_TX_CLOSE_TIMEOUT_ERR, /* 0x215 */
+ TRANS_TX_CLOSE_NORMAL_ERR, /* 0x216 */
+ TRANS_TX_CLOSE_PHYRESET_ERR, /* 0x217 */
+ TRANS_TX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x218 */
+ TRANS_TX_WITH_CLOSE_COMINIT_ERR, /* 0x219 */
+ TRANS_TX_NAK_RECEIVE_ERR, /* 0x21a */
+ TRANS_TX_ACK_NAK_TIMEOUT_ERR, /* 0x21b */
+ TRANS_TX_CREDIT_TIMEOUT_ERR, /* 0x21c */
+ TRANS_TX_IPTT_CONFLICT_ERR, /* 0x21d */
+ TRANS_TX_TXFRM_TYPE_ERR, /* 0x21e */
+ TRANS_TX_TXSMP_LENGTH_ERR, /* 0x21f */
+
+ /* trans rx */
+ TRANS_RX_FRAME_CRC_ERR = TRANS_RX_FAIL_BASE, /* 0x300 */
+ TRANS_RX_FRAME_DONE_ERR, /* 0x301 */
+ TRANS_RX_FRAME_ERRPRM_ERR, /* 0x302 */
+ TRANS_RX_FRAME_NO_CREDIT_ERR, /* 0x303 */
+ TRANS_RX_RSVD0_ERR, /* 0x304 */
+ TRANS_RX_FRAME_OVERRUN_ERR, /* 0x305 */
+ TRANS_RX_FRAME_NO_EOF_ERR, /* 0x306 */
+ TRANS_RX_LINK_BUF_OVERRUN_ERR, /* 0x307 */
+ TRANS_RX_BREAK_TIMEOUT_ERR, /* 0x308 */
+ TRANS_RX_BREAK_REQUEST_ERR, /* 0x309 */
+ TRANS_RX_BREAK_RECEIVE_ERR, /* 0x30a */
+ TRANS_RX_CLOSE_TIMEOUT_ERR, /* 0x30b */
+ TRANS_RX_CLOSE_NORMAL_ERR, /* 0x30c */
+ TRANS_RX_CLOSE_PHYRESET_ERR, /* 0x30d */
+ TRANS_RX_WITH_CLOSE_DWS_TIMEOUT_ERR, /* 0x30e */
+ TRANS_RX_WITH_CLOSE_COMINIT_ERR, /* 0x30f */
+ TRANS_RX_DATA_LENGTH0_ERR, /* 0x310 */
+ TRANS_RX_BAD_HASH_ERR, /* 0x311 */
+ TRANS_RX_XRDY_ZERO_ERR, /* 0x312 */
+ TRANS_RX_SSP_FRAME_LEN_ERR, /* 0x313 */
+ TRANS_RX_TRANS_RX_RSVD1_ERR, /* 0x314 */
+ TRANS_RX_NO_BALANCE_ERR, /* 0x315 */
+ TRANS_RX_TRANS_RX_RSVD2_ERR, /* 0x316 */
+ TRANS_RX_TRANS_RX_RSVD3_ERR, /* 0x317 */
+ TRANS_RX_BAD_FRAME_TYPE_ERR, /* 0x318 */
+ TRANS_RX_SMP_FRAME_LEN_ERR, /* 0x319 */
+ TRANS_RX_SMP_RESP_TIMEOUT_ERR, /* 0x31a */
+};
+
+#define HISI_SAS_PHY_MAX_INT_NR (HISI_SAS_PHY_INT_NR * HISI_SAS_MAX_PHYS)
+#define HISI_SAS_CQ_MAX_INT_NR (HISI_SAS_MAX_QUEUES)
+#define HISI_SAS_FATAL_INT_NR (2)
+
+#define HISI_SAS_MAX_INT_NR \
+ (HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
+ HISI_SAS_FATAL_INT_NR)
+
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 4 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 337 +++++++++++++++++++++++++++++++++
3 files changed, 342 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72533ca..ba3bf5e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -81,6 +81,7 @@ struct hisi_sas_slot {
};
struct hisi_sas_hw {
+ int (*hw_init)(struct hisi_hba *hisi_hba);
int complete_hdr_size;
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 06b863c..6c13547 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -402,6 +402,10 @@ int hisi_sas_probe(struct platform_device *pdev,
hisi_sas_init_add(hisi_hba);
+ rc = hisi_hba->hw->hw_init(hisi_hba);
+ if (rc)
+ goto err_out_ha;
+
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 9fe89bb..9bfe1aa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -405,7 +405,344 @@ enum {
(HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
HISI_SAS_FATAL_INT_NR)
+static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl(regs);
+}
+
+static void hisi_sas_write32(struct hisi_hba *hisi_hba,
+ u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ writel(val, regs);
+}
+
+static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ writel(val, regs);
+}
+
+static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ return readl(regs);
+}
+
+static void config_phy_opt_mode_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_DC_OPT_MSK;
+ cfg |= 1 << PHY_CFG_DC_OPT_OFF;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void config_tx_tfe_autoneg_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CONFIG2);
+
+ cfg &= ~PHY_CONFIG2_FORCE_TXDEEMPH_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CONFIG2, cfg);
+}
+
+static void config_id_frame_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct sas_identify_frame identify_frame;
+ u32 *identify_buffer;
+
+ memset(&identify_frame, 0, sizeof(identify_frame));
+ identify_frame.dev_type = SAS_END_DEVICE;
+ identify_frame.frame_type = 0;
+ identify_frame._un1 = 1;
+ identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
+ identify_frame.target_bits = SAS_PROTOCOL_NONE;
+ memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ identify_frame.phy_id = phy_no;
+ identify_buffer = (u32 *)(&identify_frame);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
+ __swab32(identify_buffer[0]));
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
+ identify_buffer[2]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
+ identify_buffer[1]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
+ identify_buffer[4]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
+ identify_buffer[3]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
+ __swab32(identify_buffer[5]));
+}
+
+static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ config_id_frame_v1_hw(hisi_hba, i);
+}
+
+static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ unsigned long end_time;
+ u32 val;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 phy_ctrl = hisi_sas_phy_read32(hisi_hba, i, PHY_CTRL);
+
+ phy_ctrl |= PHY_CTRL_RESET_MSK;
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, phy_ctrl);
+ }
+ msleep(1); /* It is safe to wait for 50us */
+
+ /* Ensure DMA tx & rx idle */
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 dma_tx_status, dma_rx_status;
+
+ end_time = jiffies + msecs_to_jiffies(1000);
+
+ while (1) {
+ dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_TX_STATUS);
+ dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_RX_STATUS);
+
+ if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
+ !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+ }
+
+ /* Ensure axi bus idle */
+ end_time = jiffies + msecs_to_jiffies(1000);
+ while (1) {
+ u32 axi_status =
+ hisi_sas_read32(hisi_hba, AXI_CFG);
+
+ if (axi_status == 0)
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+
+ /* Apply reset and disable clock */
+ /* clk disable reg is offset by +4 bytes from clk enable reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (RESET_VALUE != (val & RESET_VALUE)) {
+ dev_err(dev, "Reset failed\n");
+ return -EIO;
+ }
+
+ /* De-reset and enable clock */
+ /* deassert rst reg is offset by +4 bytes from assert reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (val & RESET_VALUE) {
+ dev_err(dev, "De-reset failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void init_reg_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ /* Global registers init*/
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
+ (u32)((1ULL << hisi_hba->queue_count) - 1));
+ hisi_sas_write32(hisi_hba, HGC_TRANS_TASK_CNT_LIMIT, 0x11);
+ hisi_sas_write32(hisi_hba, DEVICE_MSG_WORK_MODE, 0x1);
+ hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x1ff);
+ hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x401);
+ hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0x64);
+ hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x64);
+ hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x2710);
+ hisi_sas_write32(hisi_hba, REJECT_TO_OPEN_LIMIT_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x7a12);
+ hisi_sas_write32(hisi_hba, HGC_DFX_CFG2, 0x9c40);
+ hisi_sas_write32(hisi_hba, FIS_LIST_BADDR_L, 0x2);
+ hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x186a0);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0xffffffff);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC_MSK, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0);
+ hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 0x2);
+ hisi_sas_write32(hisi_hba, CFG_SAS_CONFIG, 0x22000000);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x88a);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CONFIG2, 0x7c080);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_RATE_NEGO, 0x415ee00);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_PCN, 0x80a80000);
+ hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0);
+ hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x13f0a);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 3);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 8);
+ }
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+
+ /* Completion queue */
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+ }
+
+ /* itct */
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->itct_dma));
+
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->itct_dma));
+
+ /* iost */
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->iost_dma));
+
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->iost_dma));
+
+ /* breakpoint */
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_LO,
+ lower_32_bits(hisi_hba->breakpoint_dma));
+
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_HI,
+ upper_32_bits(hisi_hba->breakpoint_dma));
+}
+
+static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc;
+
+ rc = reset_hw_v1_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
+ init_reg_v1_hw(hisi_hba);
+
+ init_id_frame_v1_hw(hisi_hba);
+
+ return 0;
+}
+
+static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg |= PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ config_id_frame_v1_hw(hisi_hba, phy_no);
+ config_phy_opt_mode_v1_hw(hisi_hba, phy_no);
+ config_tx_tfe_autoneg_v1_hw(hisi_hba, phy_no);
+ enable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void start_phys_v1_hw(unsigned long data)
+{
+ struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x12a);
+ start_phy_v1_hw(hisi_hba, i);
+ }
+}
+
+static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ struct timer_list *timer = &hisi_hba->timer;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a);
+ hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK);
+ }
+
+ setup_timer(timer, start_phys_v1_hw, (unsigned long)hisi_hba);
+ mod_timer(timer, jiffies + HZ);
+}
+
+static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
+{
+ int rc;
+
+ rc = hw_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ phys_init_v1_hw(hisi_hba);
+
+ return 0;
+}
+
static const struct hisi_sas_hw hisi_sas_v1_hw = {
+ .hw_init = hisi_sas_v1_init,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 4 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 337 +++++++++++++++++++++++++++++++++
3 files changed, 342 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72533ca..ba3bf5e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -81,6 +81,7 @@ struct hisi_sas_slot {
};
struct hisi_sas_hw {
+ int (*hw_init)(struct hisi_hba *hisi_hba);
int complete_hdr_size;
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 06b863c..6c13547 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -402,6 +402,10 @@ int hisi_sas_probe(struct platform_device *pdev,
hisi_sas_init_add(hisi_hba);
+ rc = hisi_hba->hw->hw_init(hisi_hba);
+ if (rc)
+ goto err_out_ha;
+
rc = scsi_add_host(shost, &pdev->dev);
if (rc)
goto err_out_ha;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 9fe89bb..9bfe1aa 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -405,7 +405,344 @@ enum {
(HISI_SAS_PHY_MAX_INT_NR + HISI_SAS_CQ_MAX_INT_NR +\
HISI_SAS_FATAL_INT_NR)
+static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl(regs);
+}
+
+static void hisi_sas_write32(struct hisi_hba *hisi_hba,
+ u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ writel(val, regs);
+}
+
+static void hisi_sas_phy_write32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off, u32 val)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ writel(val, regs);
+}
+
+static u32 hisi_sas_phy_read32(struct hisi_hba *hisi_hba,
+ int phy_no, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + (0x400 * phy_no) + off;
+
+ return readl(regs);
+}
+
+static void config_phy_opt_mode_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_DC_OPT_MSK;
+ cfg |= 1 << PHY_CFG_DC_OPT_OFF;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void config_tx_tfe_autoneg_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CONFIG2);
+
+ cfg &= ~PHY_CONFIG2_FORCE_TXDEEMPH_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CONFIG2, cfg);
+}
+
+static void config_id_frame_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct sas_identify_frame identify_frame;
+ u32 *identify_buffer;
+
+ memset(&identify_frame, 0, sizeof(identify_frame));
+ identify_frame.dev_type = SAS_END_DEVICE;
+ identify_frame.frame_type = 0;
+ identify_frame._un1 = 1;
+ identify_frame.initiator_bits = SAS_PROTOCOL_ALL;
+ identify_frame.target_bits = SAS_PROTOCOL_NONE;
+ memcpy(&identify_frame._un4_11[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ memcpy(&identify_frame.sas_addr[0], hisi_hba->sas_addr, SAS_ADDR_SIZE);
+ identify_frame.phy_id = phy_no;
+ identify_buffer = (u32 *)(&identify_frame);
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD0,
+ __swab32(identify_buffer[0]));
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD1,
+ identify_buffer[2]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD2,
+ identify_buffer[1]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD3,
+ identify_buffer[4]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD4,
+ identify_buffer[3]);
+ hisi_sas_phy_write32(hisi_hba, phy_no, TX_ID_DWORD5,
+ __swab32(identify_buffer[5]));
+}
+
+static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ config_id_frame_v1_hw(hisi_hba, i);
+}
+
+static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ unsigned long end_time;
+ u32 val;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 phy_ctrl = hisi_sas_phy_read32(hisi_hba, i, PHY_CTRL);
+
+ phy_ctrl |= PHY_CTRL_RESET_MSK;
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CTRL, phy_ctrl);
+ }
+ msleep(1); /* It is safe to wait for 50us */
+
+ /* Ensure DMA tx & rx idle */
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ u32 dma_tx_status, dma_rx_status;
+
+ end_time = jiffies + msecs_to_jiffies(1000);
+
+ while (1) {
+ dma_tx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_TX_STATUS);
+ dma_rx_status = hisi_sas_phy_read32(hisi_hba, i,
+ DMA_RX_STATUS);
+
+ if (!(dma_tx_status & DMA_TX_STATUS_BUSY_MSK) &&
+ !(dma_rx_status & DMA_RX_STATUS_BUSY_MSK))
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+ }
+
+ /* Ensure axi bus idle */
+ end_time = jiffies + msecs_to_jiffies(1000);
+ while (1) {
+ u32 axi_status =
+ hisi_sas_read32(hisi_hba, AXI_CFG);
+
+ if (axi_status == 0)
+ break;
+
+ msleep(20);
+ if (time_after(jiffies, end_time))
+ return -EIO;
+ }
+
+ /* Apply reset and disable clock */
+ /* clk disable reg is offset by +4 bytes from clk enable reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg + 4,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (RESET_VALUE != (val & RESET_VALUE)) {
+ dev_err(dev, "Reset failed\n");
+ return -EIO;
+ }
+
+ /* De-reset and enable clock */
+ /* deassert rst reg is offset by +4 bytes from assert reg */
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_reset_reg + 4,
+ RESET_VALUE);
+ regmap_write(hisi_hba->ctrl, hisi_hba->ctrl_clock_ena_reg,
+ RESET_VALUE);
+ msleep(1);
+ regmap_read(hisi_hba->ctrl, hisi_hba->ctrl_reset_sts_reg, &val);
+ if (val & RESET_VALUE) {
+ dev_err(dev, "De-reset failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void init_reg_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+
+ /* Global registers init*/
+ hisi_sas_write32(hisi_hba, DLVRY_QUEUE_ENABLE,
+ (u32)((1ULL << hisi_hba->queue_count) - 1));
+ hisi_sas_write32(hisi_hba, HGC_TRANS_TASK_CNT_LIMIT, 0x11);
+ hisi_sas_write32(hisi_hba, DEVICE_MSG_WORK_MODE, 0x1);
+ hisi_sas_write32(hisi_hba, HGC_SAS_TXFAIL_RETRY_CTRL, 0x1ff);
+ hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x401);
+ hisi_sas_write32(hisi_hba, CFG_1US_TIMER_TRSH, 0x64);
+ hisi_sas_write32(hisi_hba, HGC_GET_ITV_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x64);
+ hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x2710);
+ hisi_sas_write32(hisi_hba, REJECT_TO_OPEN_LIMIT_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x7a12);
+ hisi_sas_write32(hisi_hba, HGC_DFX_CFG2, 0x9c40);
+ hisi_sas_write32(hisi_hba, FIS_LIST_BADDR_L, 0x2);
+ hisi_sas_write32(hisi_hba, INT_COAL_EN, 0xc);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_TIME, 0x186a0);
+ hisi_sas_write32(hisi_hba, OQ_INT_COAL_CNT, 1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_TIME, 0x1);
+ hisi_sas_write32(hisi_hba, ENT_INT_COAL_CNT, 0x1);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 0xffffffff);
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC_MSK, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC1, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, 0);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, 0xffffffff);
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK2, 0);
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR_MSK, 0);
+ hisi_sas_write32(hisi_hba, AXI_AHB_CLK_CFG, 0x2);
+ hisi_sas_write32(hisi_hba, CFG_SAS_CONFIG, 0x22000000);
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, PROG_PHY_LINK_RATE, 0x88a);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_CONFIG2, 0x7c080);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_RATE_NEGO, 0x415ee00);
+ hisi_sas_phy_write32(hisi_hba, i, PHY_PCN, 0x80a80000);
+ hisi_sas_phy_write32(hisi_hba, i, SL_TOUT_CFG, 0x7d7d7d7d);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0x0);
+ hisi_sas_phy_write32(hisi_hba, i, RXOP_CHECK_CFG_H, 0x1000);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 0);
+ hisi_sas_phy_write32(hisi_hba, i, CON_CFG_DRIVER, 0x13f0a);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT_COAL_EN, 3);
+ hisi_sas_phy_write32(hisi_hba, i, DONE_RECEIVED_TIME, 8);
+ }
+
+ for (i = 0; i < hisi_hba->queue_count; i++) {
+ /* Delivery queue */
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->cmd_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+
+ /* Completion queue */
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_HI + (i * 0x14),
+ upper_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba,
+ COMPL_Q_0_BASE_ADDR_LO + (i * 0x14),
+ lower_32_bits(hisi_hba->complete_hdr_dma[i]));
+
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_DEPTH + (i * 0x14),
+ HISI_SAS_QUEUE_SLOTS);
+ }
+
+ /* itct */
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->itct_dma));
+
+ hisi_sas_write32(hisi_hba, ITCT_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->itct_dma));
+
+ /* iost */
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_LO,
+ lower_32_bits(hisi_hba->iost_dma));
+
+ hisi_sas_write32(hisi_hba, IOST_BASE_ADDR_HI,
+ upper_32_bits(hisi_hba->iost_dma));
+
+ /* breakpoint */
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_LO,
+ lower_32_bits(hisi_hba->breakpoint_dma));
+
+ hisi_sas_write32(hisi_hba, BROKEN_MSG_ADDR_HI,
+ upper_32_bits(hisi_hba->breakpoint_dma));
+}
+
+static int hw_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc;
+
+ rc = reset_hw_v1_hw(hisi_hba);
+ if (rc) {
+ dev_err(dev, "hisi_sas_reset_hw failed, rc=%d", rc);
+ return rc;
+ }
+
+ msleep(100);
+ init_reg_v1_hw(hisi_hba);
+
+ init_id_frame_v1_hw(hisi_hba);
+
+ return 0;
+}
+
+static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg |= PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
+static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ config_id_frame_v1_hw(hisi_hba, phy_no);
+ config_phy_opt_mode_v1_hw(hisi_hba, phy_no);
+ config_tx_tfe_autoneg_v1_hw(hisi_hba, phy_no);
+ enable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void start_phys_v1_hw(unsigned long data)
+{
+ struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x12a);
+ start_phy_v1_hw(hisi_hba, i);
+ }
+}
+
+static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ struct timer_list *timer = &hisi_hba->timer;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x6a);
+ hisi_sas_phy_read32(hisi_hba, i, CHL_INT2_MSK);
+ }
+
+ setup_timer(timer, start_phys_v1_hw, (unsigned long)hisi_hba);
+ mod_timer(timer, jiffies + HZ);
+}
+
+static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
+{
+ int rc;
+
+ rc = hw_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ phys_init_v1_hw(hisi_hba);
+
+ return 0;
+}
+
static const struct hisi_sas_hw hisi_sas_v1_hw = {
+ .hw_init = hisi_sas_v1_init,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add code to interrupts, so now we can get a phy up
interrupt when a disk is connected.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 5 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 161 +++++++++++++++++++++++++++++++++
2 files changed, 166 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index ba3bf5e..938fa75 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -38,6 +38,11 @@
#define HISI_SAS_NAME_LEN 32
+enum {
+ PORT_TYPE_SAS = (1U << 1),
+ PORT_TYPE_SATA = (1U << 0),
+};
+
enum dev_status {
HISI_SAS_DEV_NORMAL,
HISI_SAS_DEV_EH,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 9bfe1aa..3ea666f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -728,6 +728,159 @@ static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}
+/* Interrupts */
+static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i, phy_no = sas_phy->id;
+ u32 irq_value, context, port_id, link_rate;
+ u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
+ struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+ if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
+ dev_dbg(dev, "phyup: irq_value = %x not set enable bit\n",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
+ if (context & 1 << phy_no) {
+ dev_err(dev, "phyup: phy%d SATA attached equipment\n",
+ phy_no);
+ goto end;
+ }
+
+ port_id = (hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA) >> (4 * phy_no))
+ & 0xf;
+ if (port_id == 0xf) {
+ dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ for (i = 0; i < 6; i++) {
+ u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
+ RX_IDAF_DWORD0 + (i * 4));
+ frame_rcvd[i] = __swab32(idaf);
+ }
+
+ /* Get the linkrate */
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ sas_phy->linkrate = link_rate;
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ memcpy(sas_phy->attached_sas_addr,
+ &id->sas_addr, SAS_ADDR_SIZE);
+ dev_info(dev, "phyup: phy%d link_rate=%d\n",
+ phy_no, link_rate);
+ phy->port_id = port_id;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->phy_attached = 1;
+ phy->identify.device_type = id->dev_type;
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_PHY_ENA_MSK);
+
+ if (irq_value & CHL_INT2_SL_PHY_ENA_MSK) {
+ u32 chl_int0 = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ chl_int0 &= ~CHL_INT0_PHYCTRL_NOTRDY_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, chl_int0);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3ce3ee);
+ }
+
+ return res;
+}
+static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
+ {"Phy Up"},
+};
+static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_phyup_v1_hw,
+};
+
+static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct device_node *np = dev->of_node;
+ char *int_names = hisi_hba->int_names;
+ int i, j, irq, rc, idx;
+
+ if (!np)
+ return -ENOENT;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+
+ idx = i * HISI_SAS_PHY_INT_NR;
+ for (j = 0; j < HISI_SAS_PHY_INT_NR; j++, idx++) {
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev,
+ "irq init: fail map phy interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev),
+ phy_int_names[j], i);
+ rc = devm_request_irq(dev, irq, phy_interrupts[j], 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ phy);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "phy interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+ }
+ return 0;
+}
+
+static int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ /* Clear interrupt status */
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT0);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT1);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT2);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, val);
+
+ /* Unmask interrupt */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK, 0x3ce3ee);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0x17fff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8000012a);
+
+ /* bypass chip bug mask abnormal intr */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ }
+
+ return 0;
+}
+
static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
{
int rc;
@@ -736,6 +889,14 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
if (rc)
return rc;
+ rc = interrupt_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ rc = interrupt_openall_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
phys_init_v1_hw(hisi_hba);
return 0;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add code to interrupts, so now we can get a phy up
interrupt when a disk is connected.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 5 +
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 161 +++++++++++++++++++++++++++++++++
2 files changed, 166 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index ba3bf5e..938fa75 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -38,6 +38,11 @@
#define HISI_SAS_NAME_LEN 32
+enum {
+ PORT_TYPE_SAS = (1U << 1),
+ PORT_TYPE_SATA = (1U << 0),
+};
+
enum dev_status {
HISI_SAS_DEV_NORMAL,
HISI_SAS_DEV_EH,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 9bfe1aa..3ea666f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -728,6 +728,159 @@ static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}
+/* Interrupts */
+static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i, phy_no = sas_phy->id;
+ u32 irq_value, context, port_id, link_rate;
+ u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
+ struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+ if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
+ dev_dbg(dev, "phyup: irq_value = %x not set enable bit\n",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
+ if (context & 1 << phy_no) {
+ dev_err(dev, "phyup: phy%d SATA attached equipment\n",
+ phy_no);
+ goto end;
+ }
+
+ port_id = (hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA) >> (4 * phy_no))
+ & 0xf;
+ if (port_id == 0xf) {
+ dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ for (i = 0; i < 6; i++) {
+ u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
+ RX_IDAF_DWORD0 + (i * 4));
+ frame_rcvd[i] = __swab32(idaf);
+ }
+
+ /* Get the linkrate */
+ link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
+ link_rate = (link_rate >> (phy_no * 4)) & 0xf;
+ sas_phy->linkrate = link_rate;
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ memcpy(sas_phy->attached_sas_addr,
+ &id->sas_addr, SAS_ADDR_SIZE);
+ dev_info(dev, "phyup: phy%d link_rate=%d\n",
+ phy_no, link_rate);
+ phy->port_id = port_id;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->phy_attached = 1;
+ phy->identify.device_type = id->dev_type;
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
+ if (phy->identify.device_type == SAS_END_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != SAS_PHY_UNUSED)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_PHY_ENA_MSK);
+
+ if (irq_value & CHL_INT2_SL_PHY_ENA_MSK) {
+ u32 chl_int0 = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ chl_int0 &= ~CHL_INT0_PHYCTRL_NOTRDY_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, chl_int0);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3ce3ee);
+ }
+
+ return res;
+}
+static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
+ {"Phy Up"},
+};
+static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_phyup_v1_hw,
+};
+
+static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct device_node *np = dev->of_node;
+ char *int_names = hisi_hba->int_names;
+ int i, j, irq, rc, idx;
+
+ if (!np)
+ return -ENOENT;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ struct hisi_sas_phy *phy = &hisi_hba->phy[i];
+
+ idx = i * HISI_SAS_PHY_INT_NR;
+ for (j = 0; j < HISI_SAS_PHY_INT_NR; j++, idx++) {
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev,
+ "irq init: fail map phy interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev),
+ phy_int_names[j], i);
+ rc = devm_request_irq(dev, irq, phy_interrupts[j], 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ phy);
+ if (rc) {
+ dev_err(dev, "irq init: could not request "
+ "phy interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+ }
+ return 0;
+}
+
+static int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int i;
+ u32 val;
+
+ for (i = 0; i < hisi_hba->n_phy; i++) {
+ /* Clear interrupt status */
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT0);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT1);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, val);
+ val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT2);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, val);
+
+ /* Unmask interrupt */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK, 0x3ce3ee);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0x17fff);
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8000012a);
+
+ /* bypass chip bug mask abnormal intr */
+ hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ }
+
+ return 0;
+}
+
static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
{
int rc;
@@ -736,6 +889,14 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
if (rc)
return rc;
+ rc = interrupt_init_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
+ rc = interrupt_openall_v1_hw(hisi_hba);
+ if (rc)
+ return rc;
+
phys_init_v1_hw(hisi_hba);
return 0;
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 49 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 15 +++++++++++
3 files changed, 66 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 938fa75..837d139 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -53,6 +53,7 @@ struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
struct sas_identify identify;
struct timer_list timer;
+ struct work_struct phyup_ws;
u64 port_id; /* from hw */
u64 dev_sas_addr;
u64 phy_type;
@@ -87,6 +88,7 @@ struct hisi_sas_slot {
struct hisi_sas_hw {
int (*hw_init)(struct hisi_hba *hisi_hba);
+ void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
int complete_hdr_size;
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 6c13547..7bf6d2f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -27,6 +27,53 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha;
+
+ if (!phy->phy_attached)
+ return;
+
+ sas_ha = &hisi_hba->sha;
+ sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ }
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /*Nothing*/
+ }
+
+ sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+ sas_ha->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
+}
+
+static void hisi_sas_phyup_work(struct work_struct *work)
+{
+ struct hisi_sas_phy *phy =
+ container_of(work, struct hisi_sas_phy, phyup_ws);
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int phy_no = sas_phy->id;
+
+ hisi_hba->hw->sl_notify(hisi_hba, phy_no); /* This requires a sleep */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+}
static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
{
@@ -49,6 +96,8 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
sas_phy->frame_rcvd = &phy->frame_rcvd[0];
sas_phy->ha = (struct sas_ha_struct *)hisi_hba->shost->hostdata;
sas_phy->lldd_phy = phy;
+
+ INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
static struct scsi_transport_template *hisi_sas_stt;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3ea666f..4364279 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -728,6 +728,19 @@ static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}
+static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 sl_control;
+
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+ msleep(1);
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+}
+
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
@@ -791,6 +804,7 @@ static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
else if (phy->identify.device_type != SAS_PHY_UNUSED)
phy->identify.target_port_protocols =
SAS_PROTOCOL_SMP;
+ queue_work(hisi_hba->wq, &phy->phyup_ws);
end:
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
@@ -904,6 +918,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
+ .sl_notify = sl_notify_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 49 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 15 +++++++++++
3 files changed, 66 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 938fa75..837d139 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -53,6 +53,7 @@ struct hisi_sas_phy {
struct asd_sas_phy sas_phy;
struct sas_identify identify;
struct timer_list timer;
+ struct work_struct phyup_ws;
u64 port_id; /* from hw */
u64 dev_sas_addr;
u64 phy_type;
@@ -87,6 +88,7 @@ struct hisi_sas_slot {
struct hisi_sas_hw {
int (*hw_init)(struct hisi_hba *hisi_hba);
+ void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
int complete_hdr_size;
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 6c13547..7bf6d2f 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -27,6 +27,53 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha;
+
+ if (!phy->phy_attached)
+ return;
+
+ sas_ha = &hisi_hba->sha;
+ sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ }
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /*Nothing*/
+ }
+
+ sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+ sas_ha->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
+}
+
+static void hisi_sas_phyup_work(struct work_struct *work)
+{
+ struct hisi_sas_phy *phy =
+ container_of(work, struct hisi_sas_phy, phyup_ws);
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int phy_no = sas_phy->id;
+
+ hisi_hba->hw->sl_notify(hisi_hba, phy_no); /* This requires a sleep */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+}
static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
{
@@ -49,6 +96,8 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
sas_phy->frame_rcvd = &phy->frame_rcvd[0];
sas_phy->ha = (struct sas_ha_struct *)hisi_hba->shost->hostdata;
sas_phy->lldd_phy = phy;
+
+ INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
static struct scsi_transport_template *hisi_sas_stt;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 3ea666f..4364279 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -728,6 +728,19 @@ static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}
+static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 sl_control;
+
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control |= SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+ msleep(1);
+ sl_control = hisi_sas_phy_read32(hisi_hba, phy_no, SL_CONTROL);
+ sl_control &= ~SL_CONTROL_NOTIFY_EN_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
+}
+
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
@@ -791,6 +804,7 @@ static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
else if (phy->identify.device_type != SAS_PHY_UNUSED)
phy->identify.target_port_protocols =
SAS_PROTOCOL_SMP;
+ queue_work(hisi_hba->wq, &phy->phyup_ws);
end:
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
@@ -904,6 +918,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
+ .sl_notify = sl_notify_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 22/32] scsi: hisi_sas: add ssp command function
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add path to send ssp command to HW
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 30 +++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 234 +++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 194 +++++++++++++++++++++++++++
3 files changed, 458 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 837d139..72657eb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -35,6 +35,8 @@
#define HISI_SAS_COMMAND_TABLE_SZ \
(((sizeof(union hisi_sas_command_table)+3)/4)*4)
+#define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
+
#define HISI_SAS_NAME_LEN 32
@@ -80,15 +82,41 @@ struct hisi_sas_cq {
struct hisi_sas_device {
enum sas_device_type dev_type;
u64 device_id;
+ u64 running_req;
u8 dev_status;
};
struct hisi_sas_slot {
+ struct list_head entry;
+ struct sas_task *task;
+ struct hisi_sas_port *port;
+ u64 n_elem;
+ int dlvry_queue;
+ int dlvry_queue_slot;
+ int idx;
+ void *cmd_hdr;
+ dma_addr_t cmd_hdr_dma;
+ void *status_buffer;
+ dma_addr_t status_buffer_dma;
+ void *command_table;
+ dma_addr_t command_table_dma;
+ struct hisi_sas_sge_page *sge_page;
+ dma_addr_t sge_page_dma;
+};
+
+struct hisi_sas_tmf_task {
+ u8 tmf;
+ u16 tag_of_task_to_be_managed;
};
struct hisi_sas_hw {
int (*hw_init)(struct hisi_hba *hisi_hba);
void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
+ int (*get_free_slot)(struct hisi_hba *hisi_hba, int *q, int *s);
+ void (*start_delivery)(struct hisi_hba *hisi_hba);
+ int (*prep_ssp)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf);
int complete_hdr_size;
};
@@ -122,7 +150,9 @@ struct hisi_hba {
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
int queue_count;
+ int queue;
char *int_names;
+ struct hisi_sas_slot *slot_prep;
struct dma_pool *sge_page_pool;
struct hisi_sas_device devices[HISI_SAS_MAX_DEVICES];
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7bf6d2f..660ef6c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -12,6 +12,15 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas"
+
+#define DEV_IS_GONE(dev) \
+ ((!dev) || (dev->dev_type == SAS_PHY_UNUSED))
+
+static struct hisi_hba *dev_to_hisi_hba(struct domain_device *device)
+{
+ return device->port->ha->lldd_ha;
+}
+
static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
{
void *bitmap = hisi_hba->slot_index_tags;
@@ -19,6 +28,31 @@ static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
clear_bit(slot_idx, bitmap);
}
+static void hisi_sas_slot_index_free(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ hisi_sas_slot_index_clear(hisi_hba, slot_idx);
+}
+
+static void hisi_sas_slot_index_set(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ set_bit(slot_idx, bitmap);
+}
+
+static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, int *slot_idx)
+{
+ unsigned int index;
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ index = find_first_zero_bit(bitmap, hisi_hba->slot_index_count);
+ if (index >= hisi_hba->slot_index_count)
+ return -SAS_QUEUE_FULL;
+ hisi_sas_slot_index_set(hisi_hba, index);
+ *slot_idx = index;
+ return 0;
+}
+
static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
{
int i;
@@ -26,6 +60,199 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
for (i = 0; i < hisi_hba->slot_index_count; ++i)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf)
+{
+ return hisi_hba->hw->prep_ssp(hisi_hba, slot, is_tmf, tmf);
+}
+
+static int hisi_sas_task_prep(struct sas_task *task, struct hisi_hba *hisi_hba,
+ int is_tmf, struct hisi_sas_tmf_task *tmf,
+ int *pass)
+{
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot;
+ struct hisi_sas_cmd_hdr *cmd_hdr_base;
+ struct device *dev = &hisi_hba->pdev->dev;
+ int dlvry_queue_slot, dlvry_queue, n_elem = 0, rc, slot_idx;
+
+ if (!device->port) {
+ struct task_status_struct *ts = &task->task_status;
+
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ /*
+ * libsas will use dev->port, should
+ * not call task_done for sata
+ */
+ if (device->dev_type != SAS_SATA_DEV)
+ task->task_done(task);
+ return 0;
+ }
+
+ if (DEV_IS_GONE(sas_dev)) {
+ if (sas_dev)
+ dev_info(dev, "task prep: device %llu not ready\n",
+ sas_dev->device_id);
+ else
+ dev_info(dev, "task prep: device %016llx not ready\n",
+ SAS_ADDR(device->sas_addr));
+
+ rc = SAS_PHY_DOWN;
+ return rc;
+ }
+ port = device->port->lldd_port;
+ if (port && !port->port_attached && !tmf) {
+ if (sas_protocol_ata(task->task_proto)) {
+ struct task_status_struct *ts = &task->task_status;
+
+ dev_info(dev,
+ "task prep: SATA/STP port%d not attach device\n",
+ device->port->id);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
+ } else {
+ struct task_status_struct *ts = &task->task_status;
+
+ dev_info(dev,
+ "task prep: SAS port%d does not attach device\n",
+ device->port->id);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
+ }
+ return 0;
+ }
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ if (task->num_scatter) {
+ n_elem = dma_map_sg(dev, task->scatter,
+ task->num_scatter, task->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto prep_out;
+ }
+ }
+ } else
+ n_elem = task->num_scatter;
+
+ rc = hisi_sas_slot_index_alloc(hisi_hba, &slot_idx);
+ if (rc)
+ goto err_out;
+ rc = hisi_hba->hw->get_free_slot(hisi_hba, &dlvry_queue,
+ &dlvry_queue_slot);
+ if (rc)
+ goto err_out_tag;
+
+ slot = &hisi_hba->slot_info[slot_idx];
+ memset(slot, 0, sizeof(struct hisi_sas_slot));
+
+ slot->idx = slot_idx;
+ slot->n_elem = n_elem;
+ slot->dlvry_queue = dlvry_queue;
+ slot->dlvry_queue_slot = dlvry_queue_slot;
+ cmd_hdr_base = hisi_hba->cmd_hdr[dlvry_queue];
+ slot->cmd_hdr = &cmd_hdr_base[dlvry_queue_slot];
+ slot->task = task;
+ slot->port = port;
+ task->lldd_task = slot;
+
+ slot->status_buffer = dma_pool_alloc(hisi_hba->status_buffer_pool,
+ GFP_ATOMIC,
+ &slot->status_buffer_dma);
+ if (!slot->status_buffer)
+ goto err_out_slot_buf;
+ memset(slot->status_buffer, 0, HISI_SAS_STATUS_BUF_SZ);
+
+ slot->command_table = dma_pool_alloc(hisi_hba->command_table_pool,
+ GFP_ATOMIC,
+ &slot->command_table_dma);
+ if (!slot->command_table)
+ goto err_out_status_buf;
+ memset(slot->command_table, 0, HISI_SAS_COMMAND_TABLE_SZ);
+ memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr));
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ rc = hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ default:
+ dev_err(dev, "task prep: unknown/unsupported proto (0x%x)\n",
+ task->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc) {
+ dev_err(dev, "task prep: rc = 0x%x\n", rc);
+ if (slot->sge_page)
+ goto err_out_sge;
+ goto err_out_command_table;
+ }
+
+ list_add_tail(&slot->entry, &port->list);
+ spin_lock(&task->task_state_lock);
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&task->task_state_lock);
+
+ hisi_hba->slot_prep = slot;
+
+ sas_dev->running_req++;
+ ++(*pass);
+
+ return rc;
+
+err_out_sge:
+ dma_pool_free(hisi_hba->sge_page_pool, slot->sge_page,
+ slot->sge_page_dma);
+err_out_command_table:
+ dma_pool_free(hisi_hba->command_table_pool, slot->command_table,
+ slot->command_table_dma);
+err_out_status_buf:
+ dma_pool_free(hisi_hba->status_buffer_pool, slot->status_buffer,
+ slot->status_buffer_dma);
+err_out_slot_buf:
+ /* Nothing to be done */
+err_out_tag:
+ hisi_sas_slot_index_free(hisi_hba, slot_idx);
+err_out:
+ dev_err(dev, "task prep: failed[%d]!\n", rc);
+ if (!sas_protocol_ata(task->task_proto))
+ if (n_elem)
+ dma_unmap_sg(dev, task->scatter, n_elem,
+ task->data_dir);
+prep_out:
+ return rc;
+}
+
+static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
+ int is_tmf, struct hisi_sas_tmf_task *tmf)
+{
+ u32 rc;
+ u32 pass = 0;
+ unsigned long flags;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev);
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ /* protect task_prep and start_delivery sequence */
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ rc = hisi_sas_task_prep(task, hisi_hba, is_tmf, tmf, &pass);
+ if (rc)
+ dev_err(dev, "task exec: failed[%d]!\n", rc);
+
+ if (likely(pass))
+ hisi_hba->hw->start_delivery(hisi_hba);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ return rc;
+}
static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
{
@@ -100,6 +327,12 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+
+static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
+{
+ return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
+}
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -122,6 +355,7 @@ static struct scsi_host_template hisi_sas_sht = {
};
static struct sas_domain_function_template hisi_sas_transport_ops = {
+ .lldd_execute_task = hisi_sas_queue_command,
};
static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 4364279..07b9750 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -412,6 +412,13 @@ static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
return readl(regs);
}
+static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl_relaxed(regs);
+}
+
static void hisi_sas_write32(struct hisi_hba *hisi_hba,
u32 off, u32 val)
{
@@ -741,6 +748,190 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+/**
+ * This function allocates across all queues to load balance.
+ * Slots are allocated from queues in a round-robin fashion.
+ *
+ * The callpath to this function and upto writing the write
+ * queue pointer should be safe from interruption.
+ */
+static int get_free_slot_v1_hw(struct hisi_hba *hisi_hba, int *q, int *s)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 r, w;
+ int queue = hisi_hba->queue;
+
+ while (1) {
+ w = hisi_sas_read32_relaxed(hisi_hba,
+ DLVRY_Q_0_WR_PTR + (queue * 0x14));
+ r = hisi_sas_read32_relaxed(hisi_hba,
+ DLVRY_Q_0_RD_PTR + (queue * 0x14));
+ if (r == (w+1) % HISI_SAS_QUEUE_SLOTS) {
+ queue = (queue + 1) % hisi_hba->queue_count;
+ if (queue == hisi_hba->queue) {
+ dev_warn(dev, "could not find free slot\n");
+ return -EAGAIN;
+ }
+ continue;
+ }
+ break;
+ }
+ hisi_hba->queue = (queue + 1) % hisi_hba->queue_count;
+ *q = queue;
+ *s = w;
+ return 0;
+}
+
+static void start_delivery_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int dlvry_queue = hisi_hba->slot_prep->dlvry_queue;
+ int dlvry_queue_slot = hisi_hba->slot_prep->dlvry_queue_slot;
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14),
+ ++dlvry_queue_slot % HISI_SAS_QUEUE_SLOTS);
+}
+
+static int prep_prd_sge_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot,
+ struct hisi_sas_cmd_hdr *hdr,
+ struct scatterlist *scatter,
+ int n_elem)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct scatterlist *sg;
+ int i;
+
+ if (n_elem > HISI_SAS_SGE_PAGE_CNT) {
+ dev_err(dev, "prd err: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
+ n_elem);
+ return -EINVAL;
+ }
+
+ slot->sge_page = dma_pool_alloc(hisi_hba->sge_page_pool, GFP_ATOMIC,
+ &slot->sge_page_dma);
+ if (!slot->sge_page)
+ return -ENOMEM;
+
+ for_each_sg(scatter, sg, n_elem, i) {
+ struct hisi_sas_sge *entry = &slot->sge_page->sge[i];
+
+ entry->addr = cpu_to_le64(sg_dma_address(sg));
+ entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
+ entry->data_len = cpu_to_le32(sg_dma_len(sg));
+ entry->data_off = 0;
+ }
+
+ hdr->prd_table_addr = cpu_to_le64(slot->sge_page_dma);
+
+ hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+
+ return 0;
+}
+
+
+static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_sas_port *port = slot->port;
+ struct sas_ssp_task *ssp_task = &task->ssp_task;
+ struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+ int has_data = 0, rc, priority = is_tmf;
+ u8 *buf_cmd, fburst = 0;
+ u32 dw1, dw2;
+
+ /* create header */
+ hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
+ (0x2 << CMD_HDR_TLR_CTRL_OFF) |
+ (port->id << CMD_HDR_PORT_OFF) |
+ (priority << CMD_HDR_PRIORITY_OFF) |
+ (1 << CMD_HDR_MODE_OFF) | /* ini mode */
+ (1 << CMD_HDR_CMD_OFF)); /* ssp */
+
+ dw1 = 1 << CMD_HDR_VERIFY_DTL_OFF;
+
+ if (is_tmf) {
+ dw1 |= 3 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ } else {
+ switch (scsi_cmnd->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ dw1 |= 2 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ has_data = 1;
+ break;
+ case DMA_FROM_DEVICE:
+ dw1 |= 1 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ has_data = 1;
+ break;
+ default:
+ dw1 |= 0 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ }
+ }
+
+ /* map itct entry */
+ dw1 |= sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF;
+ hdr->dw1 = cpu_to_le32(dw1);
+
+ if (is_tmf) {
+ dw2 = ((sizeof(struct ssp_tmf_iu) +
+ sizeof(struct ssp_frame_hdr)+3)/4) <<
+ CMD_HDR_CFL_OFF;
+ } else {
+ dw2 = ((sizeof(struct ssp_command_iu) +
+ sizeof(struct ssp_frame_hdr)+3)/4) <<
+ CMD_HDR_CFL_OFF;
+ }
+
+ dw2 |= (HISI_SAS_MAX_SSP_RESP_SZ/4) << CMD_HDR_MRFL_OFF;
+
+ hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
+
+ if (has_data) {
+ rc = prep_prd_sge_v1_hw(hisi_hba, slot, hdr, task->scatter,
+ slot->n_elem);
+ if (rc)
+ return rc;
+ }
+
+ hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
+ hdr->cmd_table_addr = cpu_to_le64(slot->command_table_dma);
+ hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+ buf_cmd = slot->command_table + sizeof(struct ssp_frame_hdr);
+ if (task->ssp_task.enable_first_burst) {
+ fburst = (1 << 7);
+ dw2 |= 1 << CMD_HDR_FIRST_BURST_OFF;
+ }
+ hdr->dw2 = cpu_to_le32(dw2);
+
+ memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+ if (!is_tmf) {
+ buf_cmd[9] = fburst | task->ssp_task.task_attr |
+ (task->ssp_task.task_prio << 3);
+ memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
+ } else {
+ buf_cmd[10] = tmf->tmf;
+ switch (tmf->tmf) {
+ case TMF_ABORT_TASK:
+ case TMF_QUERY_TASK:
+ buf_cmd[12] =
+ (tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+ buf_cmd[13] =
+ tmf->tag_of_task_to_be_managed & 0xff;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return 0;
+}
+
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
@@ -919,6 +1110,9 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
.sl_notify = sl_notify_v1_hw,
+ .prep_ssp = prep_ssp_v1_hw,
+ .get_free_slot = get_free_slot_v1_hw,
+ .start_delivery = start_delivery_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 22/32] scsi: hisi_sas: add ssp command function
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add path to send ssp command to HW
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 30 +++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 234 +++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 194 +++++++++++++++++++++++++++
3 files changed, 458 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 837d139..72657eb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -35,6 +35,8 @@
#define HISI_SAS_COMMAND_TABLE_SZ \
(((sizeof(union hisi_sas_command_table)+3)/4)*4)
+#define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
+
#define HISI_SAS_NAME_LEN 32
@@ -80,15 +82,41 @@ struct hisi_sas_cq {
struct hisi_sas_device {
enum sas_device_type dev_type;
u64 device_id;
+ u64 running_req;
u8 dev_status;
};
struct hisi_sas_slot {
+ struct list_head entry;
+ struct sas_task *task;
+ struct hisi_sas_port *port;
+ u64 n_elem;
+ int dlvry_queue;
+ int dlvry_queue_slot;
+ int idx;
+ void *cmd_hdr;
+ dma_addr_t cmd_hdr_dma;
+ void *status_buffer;
+ dma_addr_t status_buffer_dma;
+ void *command_table;
+ dma_addr_t command_table_dma;
+ struct hisi_sas_sge_page *sge_page;
+ dma_addr_t sge_page_dma;
+};
+
+struct hisi_sas_tmf_task {
+ u8 tmf;
+ u16 tag_of_task_to_be_managed;
};
struct hisi_sas_hw {
int (*hw_init)(struct hisi_hba *hisi_hba);
void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
+ int (*get_free_slot)(struct hisi_hba *hisi_hba, int *q, int *s);
+ void (*start_delivery)(struct hisi_hba *hisi_hba);
+ int (*prep_ssp)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf);
int complete_hdr_size;
};
@@ -122,7 +150,9 @@ struct hisi_hba {
struct hisi_sas_port port[HISI_SAS_MAX_PHYS];
int queue_count;
+ int queue;
char *int_names;
+ struct hisi_sas_slot *slot_prep;
struct dma_pool *sge_page_pool;
struct hisi_sas_device devices[HISI_SAS_MAX_DEVICES];
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 7bf6d2f..660ef6c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -12,6 +12,15 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas"
+
+#define DEV_IS_GONE(dev) \
+ ((!dev) || (dev->dev_type == SAS_PHY_UNUSED))
+
+static struct hisi_hba *dev_to_hisi_hba(struct domain_device *device)
+{
+ return device->port->ha->lldd_ha;
+}
+
static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
{
void *bitmap = hisi_hba->slot_index_tags;
@@ -19,6 +28,31 @@ static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx)
clear_bit(slot_idx, bitmap);
}
+static void hisi_sas_slot_index_free(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ hisi_sas_slot_index_clear(hisi_hba, slot_idx);
+}
+
+static void hisi_sas_slot_index_set(struct hisi_hba *hisi_hba, int slot_idx)
+{
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ set_bit(slot_idx, bitmap);
+}
+
+static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, int *slot_idx)
+{
+ unsigned int index;
+ void *bitmap = hisi_hba->slot_index_tags;
+
+ index = find_first_zero_bit(bitmap, hisi_hba->slot_index_count);
+ if (index >= hisi_hba->slot_index_count)
+ return -SAS_QUEUE_FULL;
+ hisi_sas_slot_index_set(hisi_hba, index);
+ *slot_idx = index;
+ return 0;
+}
+
static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
{
int i;
@@ -26,6 +60,199 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
for (i = 0; i < hisi_hba->slot_index_count; ++i)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf)
+{
+ return hisi_hba->hw->prep_ssp(hisi_hba, slot, is_tmf, tmf);
+}
+
+static int hisi_sas_task_prep(struct sas_task *task, struct hisi_hba *hisi_hba,
+ int is_tmf, struct hisi_sas_tmf_task *tmf,
+ int *pass)
+{
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot;
+ struct hisi_sas_cmd_hdr *cmd_hdr_base;
+ struct device *dev = &hisi_hba->pdev->dev;
+ int dlvry_queue_slot, dlvry_queue, n_elem = 0, rc, slot_idx;
+
+ if (!device->port) {
+ struct task_status_struct *ts = &task->task_status;
+
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ /*
+ * libsas will use dev->port, should
+ * not call task_done for sata
+ */
+ if (device->dev_type != SAS_SATA_DEV)
+ task->task_done(task);
+ return 0;
+ }
+
+ if (DEV_IS_GONE(sas_dev)) {
+ if (sas_dev)
+ dev_info(dev, "task prep: device %llu not ready\n",
+ sas_dev->device_id);
+ else
+ dev_info(dev, "task prep: device %016llx not ready\n",
+ SAS_ADDR(device->sas_addr));
+
+ rc = SAS_PHY_DOWN;
+ return rc;
+ }
+ port = device->port->lldd_port;
+ if (port && !port->port_attached && !tmf) {
+ if (sas_protocol_ata(task->task_proto)) {
+ struct task_status_struct *ts = &task->task_status;
+
+ dev_info(dev,
+ "task prep: SATA/STP port%d not attach device\n",
+ device->port->id);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
+ } else {
+ struct task_status_struct *ts = &task->task_status;
+
+ dev_info(dev,
+ "task prep: SAS port%d does not attach device\n",
+ device->port->id);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ task->task_done(task);
+ }
+ return 0;
+ }
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ if (task->num_scatter) {
+ n_elem = dma_map_sg(dev, task->scatter,
+ task->num_scatter, task->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto prep_out;
+ }
+ }
+ } else
+ n_elem = task->num_scatter;
+
+ rc = hisi_sas_slot_index_alloc(hisi_hba, &slot_idx);
+ if (rc)
+ goto err_out;
+ rc = hisi_hba->hw->get_free_slot(hisi_hba, &dlvry_queue,
+ &dlvry_queue_slot);
+ if (rc)
+ goto err_out_tag;
+
+ slot = &hisi_hba->slot_info[slot_idx];
+ memset(slot, 0, sizeof(struct hisi_sas_slot));
+
+ slot->idx = slot_idx;
+ slot->n_elem = n_elem;
+ slot->dlvry_queue = dlvry_queue;
+ slot->dlvry_queue_slot = dlvry_queue_slot;
+ cmd_hdr_base = hisi_hba->cmd_hdr[dlvry_queue];
+ slot->cmd_hdr = &cmd_hdr_base[dlvry_queue_slot];
+ slot->task = task;
+ slot->port = port;
+ task->lldd_task = slot;
+
+ slot->status_buffer = dma_pool_alloc(hisi_hba->status_buffer_pool,
+ GFP_ATOMIC,
+ &slot->status_buffer_dma);
+ if (!slot->status_buffer)
+ goto err_out_slot_buf;
+ memset(slot->status_buffer, 0, HISI_SAS_STATUS_BUF_SZ);
+
+ slot->command_table = dma_pool_alloc(hisi_hba->command_table_pool,
+ GFP_ATOMIC,
+ &slot->command_table_dma);
+ if (!slot->command_table)
+ goto err_out_status_buf;
+ memset(slot->command_table, 0, HISI_SAS_COMMAND_TABLE_SZ);
+ memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr));
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ rc = hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ default:
+ dev_err(dev, "task prep: unknown/unsupported proto (0x%x)\n",
+ task->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc) {
+ dev_err(dev, "task prep: rc = 0x%x\n", rc);
+ if (slot->sge_page)
+ goto err_out_sge;
+ goto err_out_command_table;
+ }
+
+ list_add_tail(&slot->entry, &port->list);
+ spin_lock(&task->task_state_lock);
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&task->task_state_lock);
+
+ hisi_hba->slot_prep = slot;
+
+ sas_dev->running_req++;
+ ++(*pass);
+
+ return rc;
+
+err_out_sge:
+ dma_pool_free(hisi_hba->sge_page_pool, slot->sge_page,
+ slot->sge_page_dma);
+err_out_command_table:
+ dma_pool_free(hisi_hba->command_table_pool, slot->command_table,
+ slot->command_table_dma);
+err_out_status_buf:
+ dma_pool_free(hisi_hba->status_buffer_pool, slot->status_buffer,
+ slot->status_buffer_dma);
+err_out_slot_buf:
+ /* Nothing to be done */
+err_out_tag:
+ hisi_sas_slot_index_free(hisi_hba, slot_idx);
+err_out:
+ dev_err(dev, "task prep: failed[%d]!\n", rc);
+ if (!sas_protocol_ata(task->task_proto))
+ if (n_elem)
+ dma_unmap_sg(dev, task->scatter, n_elem,
+ task->data_dir);
+prep_out:
+ return rc;
+}
+
+static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags,
+ int is_tmf, struct hisi_sas_tmf_task *tmf)
+{
+ u32 rc;
+ u32 pass = 0;
+ unsigned long flags;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev);
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ /* protect task_prep and start_delivery sequence */
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ rc = hisi_sas_task_prep(task, hisi_hba, is_tmf, tmf, &pass);
+ if (rc)
+ dev_err(dev, "task exec: failed[%d]!\n", rc);
+
+ if (likely(pass))
+ hisi_hba->hw->start_delivery(hisi_hba);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ return rc;
+}
static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
{
@@ -100,6 +327,12 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+
+static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
+{
+ return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
+}
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -122,6 +355,7 @@ static struct scsi_host_template hisi_sas_sht = {
};
static struct sas_domain_function_template hisi_sas_transport_ops = {
+ .lldd_execute_task = hisi_sas_queue_command,
};
static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 4364279..07b9750 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -412,6 +412,13 @@ static u32 hisi_sas_read32(struct hisi_hba *hisi_hba, u32 off)
return readl(regs);
}
+static u32 hisi_sas_read32_relaxed(struct hisi_hba *hisi_hba, u32 off)
+{
+ void __iomem *regs = hisi_hba->regs + off;
+
+ return readl_relaxed(regs);
+}
+
static void hisi_sas_write32(struct hisi_hba *hisi_hba,
u32 off, u32 val)
{
@@ -741,6 +748,190 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+/**
+ * This function allocates across all queues to load balance.
+ * Slots are allocated from queues in a round-robin fashion.
+ *
+ * The callpath to this function and upto writing the write
+ * queue pointer should be safe from interruption.
+ */
+static int get_free_slot_v1_hw(struct hisi_hba *hisi_hba, int *q, int *s)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 r, w;
+ int queue = hisi_hba->queue;
+
+ while (1) {
+ w = hisi_sas_read32_relaxed(hisi_hba,
+ DLVRY_Q_0_WR_PTR + (queue * 0x14));
+ r = hisi_sas_read32_relaxed(hisi_hba,
+ DLVRY_Q_0_RD_PTR + (queue * 0x14));
+ if (r == (w+1) % HISI_SAS_QUEUE_SLOTS) {
+ queue = (queue + 1) % hisi_hba->queue_count;
+ if (queue == hisi_hba->queue) {
+ dev_warn(dev, "could not find free slot\n");
+ return -EAGAIN;
+ }
+ continue;
+ }
+ break;
+ }
+ hisi_hba->queue = (queue + 1) % hisi_hba->queue_count;
+ *q = queue;
+ *s = w;
+ return 0;
+}
+
+static void start_delivery_v1_hw(struct hisi_hba *hisi_hba)
+{
+ int dlvry_queue = hisi_hba->slot_prep->dlvry_queue;
+ int dlvry_queue_slot = hisi_hba->slot_prep->dlvry_queue_slot;
+
+ hisi_sas_write32(hisi_hba,
+ DLVRY_Q_0_WR_PTR + (dlvry_queue * 0x14),
+ ++dlvry_queue_slot % HISI_SAS_QUEUE_SLOTS);
+}
+
+static int prep_prd_sge_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot,
+ struct hisi_sas_cmd_hdr *hdr,
+ struct scatterlist *scatter,
+ int n_elem)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct scatterlist *sg;
+ int i;
+
+ if (n_elem > HISI_SAS_SGE_PAGE_CNT) {
+ dev_err(dev, "prd err: n_elem(%d) > HISI_SAS_SGE_PAGE_CNT",
+ n_elem);
+ return -EINVAL;
+ }
+
+ slot->sge_page = dma_pool_alloc(hisi_hba->sge_page_pool, GFP_ATOMIC,
+ &slot->sge_page_dma);
+ if (!slot->sge_page)
+ return -ENOMEM;
+
+ for_each_sg(scatter, sg, n_elem, i) {
+ struct hisi_sas_sge *entry = &slot->sge_page->sge[i];
+
+ entry->addr = cpu_to_le64(sg_dma_address(sg));
+ entry->page_ctrl_0 = entry->page_ctrl_1 = 0;
+ entry->data_len = cpu_to_le32(sg_dma_len(sg));
+ entry->data_off = 0;
+ }
+
+ hdr->prd_table_addr = cpu_to_le64(slot->sge_page_dma);
+
+ hdr->sg_len = cpu_to_le32(n_elem << CMD_HDR_DATA_SGL_LEN_OFF);
+
+ return 0;
+}
+
+
+static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int is_tmf,
+ struct hisi_sas_tmf_task *tmf)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_sas_port *port = slot->port;
+ struct sas_ssp_task *ssp_task = &task->ssp_task;
+ struct scsi_cmnd *scsi_cmnd = ssp_task->cmd;
+ int has_data = 0, rc, priority = is_tmf;
+ u8 *buf_cmd, fburst = 0;
+ u32 dw1, dw2;
+
+ /* create header */
+ hdr->dw0 = cpu_to_le32((1 << CMD_HDR_RESP_REPORT_OFF) |
+ (0x2 << CMD_HDR_TLR_CTRL_OFF) |
+ (port->id << CMD_HDR_PORT_OFF) |
+ (priority << CMD_HDR_PRIORITY_OFF) |
+ (1 << CMD_HDR_MODE_OFF) | /* ini mode */
+ (1 << CMD_HDR_CMD_OFF)); /* ssp */
+
+ dw1 = 1 << CMD_HDR_VERIFY_DTL_OFF;
+
+ if (is_tmf) {
+ dw1 |= 3 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ } else {
+ switch (scsi_cmnd->sc_data_direction) {
+ case DMA_TO_DEVICE:
+ dw1 |= 2 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ has_data = 1;
+ break;
+ case DMA_FROM_DEVICE:
+ dw1 |= 1 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ has_data = 1;
+ break;
+ default:
+ dw1 |= 0 << CMD_HDR_SSP_FRAME_TYPE_OFF;
+ }
+ }
+
+ /* map itct entry */
+ dw1 |= sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF;
+ hdr->dw1 = cpu_to_le32(dw1);
+
+ if (is_tmf) {
+ dw2 = ((sizeof(struct ssp_tmf_iu) +
+ sizeof(struct ssp_frame_hdr)+3)/4) <<
+ CMD_HDR_CFL_OFF;
+ } else {
+ dw2 = ((sizeof(struct ssp_command_iu) +
+ sizeof(struct ssp_frame_hdr)+3)/4) <<
+ CMD_HDR_CFL_OFF;
+ }
+
+ dw2 |= (HISI_SAS_MAX_SSP_RESP_SZ/4) << CMD_HDR_MRFL_OFF;
+
+ hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
+
+ if (has_data) {
+ rc = prep_prd_sge_v1_hw(hisi_hba, slot, hdr, task->scatter,
+ slot->n_elem);
+ if (rc)
+ return rc;
+ }
+
+ hdr->data_transfer_len = cpu_to_le32(task->total_xfer_len);
+ hdr->cmd_table_addr = cpu_to_le64(slot->command_table_dma);
+ hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+ buf_cmd = slot->command_table + sizeof(struct ssp_frame_hdr);
+ if (task->ssp_task.enable_first_burst) {
+ fburst = (1 << 7);
+ dw2 |= 1 << CMD_HDR_FIRST_BURST_OFF;
+ }
+ hdr->dw2 = cpu_to_le32(dw2);
+
+ memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+ if (!is_tmf) {
+ buf_cmd[9] = fburst | task->ssp_task.task_attr |
+ (task->ssp_task.task_prio << 3);
+ memcpy(buf_cmd + 12, task->ssp_task.cmd->cmnd,
+ task->ssp_task.cmd->cmd_len);
+ } else {
+ buf_cmd[10] = tmf->tmf;
+ switch (tmf->tmf) {
+ case TMF_ABORT_TASK:
+ case TMF_QUERY_TASK:
+ buf_cmd[12] =
+ (tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+ buf_cmd[13] =
+ tmf->tag_of_task_to_be_managed & 0xff;
+ break;
+ default:
+ break;
+ }
+ }
+
+ return 0;
+}
+
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
@@ -919,6 +1110,9 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
.sl_notify = sl_notify_v1_hw,
+ .prep_ssp = prep_ssp_v1_hw,
+ .get_free_slot = get_free_slot_v1_hw,
+ .start_delivery = start_delivery_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add cq interrupt handler and also slot error handler
function.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 9 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 35 ++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 345 +++++++++++++++++++++++++++++++++
3 files changed, 389 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72657eb..fe4055b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -93,6 +93,8 @@ struct hisi_sas_slot {
u64 n_elem;
int dlvry_queue;
int dlvry_queue_slot;
+ int cmplt_queue;
+ int cmplt_queue_slot;
int idx;
void *cmd_hdr;
dma_addr_t cmd_hdr_dma;
@@ -117,6 +119,10 @@ struct hisi_sas_hw {
int (*prep_ssp)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf);
+ int (*slot_complete)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int abort);
+ void (*free_device)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *dev);
int complete_hdr_size;
};
@@ -311,4 +317,7 @@ extern int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *ops);
extern int hisi_sas_remove(struct platform_device *pdev);
+extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
+ struct sas_task *task,
+ struct hisi_sas_slot *slot);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 660ef6c..ddbd2b71 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -60,6 +60,41 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
for (i = 0; i < hisi_hba->slot_index_count; ++i)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+
+void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
+ struct hisi_sas_slot *slot)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ if (!slot->task)
+ return;
+
+ if (!sas_protocol_ata(task->task_proto))
+ if (slot->n_elem)
+ dma_unmap_sg(dev, task->scatter, slot->n_elem,
+ task->data_dir);
+
+ if (slot->command_table)
+ dma_pool_free(hisi_hba->command_table_pool,
+ slot->command_table, slot->command_table_dma);
+
+ if (slot->status_buffer)
+ dma_pool_free(hisi_hba->status_buffer_pool,
+ slot->status_buffer, slot->status_buffer_dma);
+
+ if (slot->sge_page)
+ dma_pool_free(hisi_hba->sge_page_pool, slot->sge_page,
+ slot->sge_page_dma);
+
+ list_del_init(&slot->entry);
+ task->lldd_task = NULL;
+ slot->task = NULL;
+ slot->port = NULL;
+ hisi_sas_slot_index_free(hisi_hba, slot->idx);
+ memset(slot, 0, sizeof(*slot));
+}
+EXPORT_SYMBOL_GPL(hisi_sas_slot_task_free);
+
static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 07b9750..6711c0a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -498,6 +498,28 @@ static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
config_id_frame_v1_hw(hisi_hba, i);
}
+
+static void free_device_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ u64 dev_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
+ u32 qw0, reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+
+ reg_val |= CFG_AGING_TIME_ITCT_REL_MSK;
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
+
+ /* free itct */
+ udelay(1);
+ reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+ reg_val &= ~CFG_AGING_TIME_ITCT_REL_MSK;
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
+
+ qw0 = cpu_to_le64(itct->qw0);
+ qw0 &= ~ITCT_HDR_VALID_MSK;
+ itct->qw0 = cpu_to_le64(qw0);
+}
+
static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
{
int i;
@@ -932,6 +954,253 @@ static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
return 0;
}
+/* by default, task resp is complete */
+static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
+ struct sas_task *task,
+ struct hisi_sas_slot *slot)
+{
+ struct task_status_struct *ts = &task->task_status;
+ struct hisi_sas_err_record *err_record = slot->status_buffer;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ {
+ int error = -1;
+ u32 dma_err_type = cpu_to_le32(err_record->dma_err_type);
+ u32 dma_tx_err_type = ((dma_err_type &
+ ERR_HDR_DMA_TX_ERR_TYPE_MSK)) >>
+ ERR_HDR_DMA_TX_ERR_TYPE_OFF;
+ u32 dma_rx_err_type = ((dma_err_type &
+ ERR_HDR_DMA_RX_ERR_TYPE_MSK)) >>
+ ERR_HDR_DMA_RX_ERR_TYPE_OFF;
+ u32 trans_tx_fail_type =
+ cpu_to_le32(err_record->trans_tx_fail_type);
+ u32 trans_rx_fail_type =
+ cpu_to_le32(err_record->trans_rx_fail_type);
+
+ if (dma_tx_err_type) {
+ /* dma tx err */
+ error = ffs(dma_tx_err_type)
+ - 1 + DMA_TX_ERR_BASE;
+ } else if (dma_rx_err_type) {
+ /* dma rx err */
+ error = ffs(dma_rx_err_type)
+ - 1 + DMA_RX_ERR_BASE;
+ } else if (trans_tx_fail_type) {
+ /* trans tx err */
+ error = ffs(trans_tx_fail_type)
+ - 1 + TRANS_TX_FAIL_BASE;
+ } else if (trans_rx_fail_type) {
+ /* trans rx err */
+ error = ffs(trans_rx_fail_type)
+ - 1 + TRANS_RX_FAIL_BASE;
+ }
+
+ switch (error) {
+ case DMA_TX_DATA_UNDERFLOW_ERR:
+ case DMA_RX_DATA_UNDERFLOW_ERR:
+ {
+ ts->residual = 0;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ }
+ case DMA_TX_DATA_SGL_OVERFLOW_ERR:
+ case DMA_TX_DIF_SGL_OVERFLOW_ERR:
+ case DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR:
+ case DMA_RX_DATA_OVERFLOW_ERR:
+ case TRANS_RX_FRAME_OVERRUN_ERR:
+ case TRANS_RX_LINK_BUF_OVERRUN_ERR:
+ {
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ }
+ case TRANS_TX_PHY_NOT_ENABLE_ERR:
+ {
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ }
+ case TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR:
+ case TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR:
+ case TRANS_TX_OPEN_REJCT_BY_OTHER_ERR:
+ case TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR:
+ case TRANS_TX_OPEN_REJCT_STP_BUSY_ERR:
+ case TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR:
+ case TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR:
+ case TRANS_TX_OPEN_REJCT_BAD_DEST_ERR:
+ case TRANS_TX_OPEN_BREAK_RECEIVE_ERR:
+ case TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR:
+ case TRANS_TX_OPEN_REJCT_NO_DEST_ERR:
+ case TRANS_TX_OPEN_RETRY_ERR:
+ {
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ }
+ case TRANS_TX_OPEN_TIMEOUT_ERR:
+ {
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+ case TRANS_TX_NAK_RECEIVE_ERR:
+ case TRANS_TX_ACK_NAK_TIMEOUT_ERR:
+ {
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ }
+ default:
+ {
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ }
+ }
+ }
+ break;
+ case SAS_PROTOCOL_SMP:
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ {
+ dev_err(dev, "slot err: SATA/STP not supported");
+ }
+ break;
+ default:
+ break;
+ }
+
+}
+
+static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int abort)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_device *sas_dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct task_status_struct *ts;
+ struct domain_device *device;
+ enum exec_status sts;
+ struct hisi_sas_complete_v1_hdr *complete_queue =
+ (struct hisi_sas_complete_v1_hdr *)
+ hisi_hba->complete_hdr[slot->cmplt_queue];
+ struct hisi_sas_complete_v1_hdr *complete_hdr;
+ u32 cmplt_hdr_data;
+
+ complete_hdr = &complete_queue[slot->cmplt_queue_slot];
+ cmplt_hdr_data = le32_to_cpu(complete_hdr->data);
+
+ if (unlikely(!task || !task->lldd_task || !task->dev))
+ return -EINVAL;
+
+ ts = &task->task_status;
+ device = task->dev;
+ sas_dev = device->lldd_dev;
+
+ task->task_state_flags &=
+ ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+
+ memset(ts, 0, sizeof(*ts));
+ ts->resp = SAS_TASK_COMPLETE;
+
+ if (unlikely(!sas_dev || abort)) {
+ if (!sas_dev)
+ dev_dbg(dev, "slot complete: port has not device\n");
+ ts->stat = SAS_PHY_DOWN;
+ goto out;
+ }
+
+ if (cmplt_hdr_data & CMPLT_HDR_IO_CFG_ERR_MSK) {
+ u32 info_reg = hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_DQ_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_TYPE_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq type err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_FORCE_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq force phy err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_PHY_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq phy id err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_ABORT_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq abort flag err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_IPTT_OF_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_SSP_ERR_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_OFL_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq order frame len err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ goto out;
+ }
+
+ if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK) {
+ if (!(cmplt_hdr_data & CMPLT_HDR_CMD_CMPLT_MSK) ||
+ !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK))
+ ts->stat = SAS_DATA_OVERRUN;
+ else
+ slot_err_v1_hw(hisi_hba, task, slot);
+
+ goto out;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ {
+ struct ssp_response_iu *iu = slot->status_buffer +
+ sizeof(struct hisi_sas_err_record);
+ sas_ssp_task_response(dev, task, iu);
+ break;
+ }
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ dev_err(dev, "slot complete: SATA/STP not supported");
+ break;
+
+ default:
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ }
+
+ if (!slot->port->port_attached) {
+ dev_err(dev, "slot complete: port %d has removed\n",
+ slot->port->sas_port.id);
+ ts->stat = SAS_PHY_DOWN;
+ }
+
+out:
+ if (sas_dev && sas_dev->running_req)
+ sas_dev->running_req--;
+
+ hisi_sas_slot_task_free(hisi_hba, task, slot);
+ sts = ts->stat;
+
+ if (task->task_done)
+ task->task_done(task);
+
+ return sts;
+}
+
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
@@ -1011,9 +1280,61 @@ end:
return res;
}
+
+static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_cq *cq = p;
+ struct hisi_hba *hisi_hba = cq->hisi_hba;
+ struct hisi_sas_slot *slot;
+ int queue = cq->id;
+ struct hisi_sas_complete_v1_hdr *complete_queue =
+ (struct hisi_sas_complete_v1_hdr *)
+ hisi_hba->complete_hdr[queue];
+ u32 irq_value, rd_point, wr_point;
+
+ irq_value = hisi_sas_read32(hisi_hba, OQ_INT_SRC);
+
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
+
+ rd_point = hisi_sas_read32(hisi_hba,
+ COMPL_Q_0_RD_PTR + (0x14 * queue));
+ wr_point = hisi_sas_read32(hisi_hba,
+ COMPL_Q_0_WR_PTR + (0x14 * queue));
+
+ while (rd_point != wr_point) {
+ struct hisi_sas_complete_v1_hdr *complete_hdr;
+ int idx;
+ u32 cmplt_hdr_data;
+
+ complete_hdr = &complete_queue[rd_point];
+ cmplt_hdr_data = cpu_to_le32(complete_hdr->data);
+ idx = (cmplt_hdr_data & CMPLT_HDR_IPTT_MSK) >>
+ CMPLT_HDR_IPTT_OFF;
+ slot = &hisi_hba->slot_info[idx];
+
+ /* The completion queue and queue slot index are not
+ * necessarily the same as the delivery queue and
+ * queue slot index.
+ */
+ slot->cmplt_queue_slot = rd_point;
+ slot->cmplt_queue = queue;
+ slot_complete_v1_hw(hisi_hba, slot, 0);
+
+ if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
+ rd_point = 0;
+ }
+
+ /* update rd_point */
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
+
+ return IRQ_HANDLED;
+}
+
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Phy Up"},
};
+
+static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phyup_v1_hw,
};
@@ -1056,6 +1377,28 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
}
}
}
+
+ idx = hisi_hba->n_phy * HISI_SAS_PHY_INT_NR;
+ for (i = 0; i < hisi_hba->queue_count; i++, idx++) {
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev, "irq init: could not map cq interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev), cq_int_name, i);
+ rc = devm_request_irq(dev, irq, cq_interrupt_v1_hw, 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ &hisi_hba->cq[i]);
+ if (rc) {
+ dev_err(dev, "irq init: could not request cq interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
return 0;
}
@@ -1110,9 +1453,11 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
.sl_notify = sl_notify_v1_hw,
+ .free_device = free_device_v1_hw,
.prep_ssp = prep_ssp_v1_hw,
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
+ .slot_complete = slot_complete_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add cq interrupt handler and also slot error handler
function.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 9 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 35 ++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 345 +++++++++++++++++++++++++++++++++
3 files changed, 389 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 72657eb..fe4055b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -93,6 +93,8 @@ struct hisi_sas_slot {
u64 n_elem;
int dlvry_queue;
int dlvry_queue_slot;
+ int cmplt_queue;
+ int cmplt_queue_slot;
int idx;
void *cmd_hdr;
dma_addr_t cmd_hdr_dma;
@@ -117,6 +119,10 @@ struct hisi_sas_hw {
int (*prep_ssp)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf);
+ int (*slot_complete)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int abort);
+ void (*free_device)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *dev);
int complete_hdr_size;
};
@@ -311,4 +317,7 @@ extern int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *ops);
extern int hisi_sas_remove(struct platform_device *pdev);
+extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
+ struct sas_task *task,
+ struct hisi_sas_slot *slot);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 660ef6c..ddbd2b71 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -60,6 +60,41 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba)
for (i = 0; i < hisi_hba->slot_index_count; ++i)
hisi_sas_slot_index_clear(hisi_hba, i);
}
+
+void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
+ struct hisi_sas_slot *slot)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ if (!slot->task)
+ return;
+
+ if (!sas_protocol_ata(task->task_proto))
+ if (slot->n_elem)
+ dma_unmap_sg(dev, task->scatter, slot->n_elem,
+ task->data_dir);
+
+ if (slot->command_table)
+ dma_pool_free(hisi_hba->command_table_pool,
+ slot->command_table, slot->command_table_dma);
+
+ if (slot->status_buffer)
+ dma_pool_free(hisi_hba->status_buffer_pool,
+ slot->status_buffer, slot->status_buffer_dma);
+
+ if (slot->sge_page)
+ dma_pool_free(hisi_hba->sge_page_pool, slot->sge_page,
+ slot->sge_page_dma);
+
+ list_del_init(&slot->entry);
+ task->lldd_task = NULL;
+ slot->task = NULL;
+ slot->port = NULL;
+ hisi_sas_slot_index_free(hisi_hba, slot->idx);
+ memset(slot, 0, sizeof(*slot));
+}
+EXPORT_SYMBOL_GPL(hisi_sas_slot_task_free);
+
static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 07b9750..6711c0a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -498,6 +498,28 @@ static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
config_id_frame_v1_hw(hisi_hba, i);
}
+
+static void free_device_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ u64 dev_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
+ u32 qw0, reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+
+ reg_val |= CFG_AGING_TIME_ITCT_REL_MSK;
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
+
+ /* free itct */
+ udelay(1);
+ reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+ reg_val &= ~CFG_AGING_TIME_ITCT_REL_MSK;
+ hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);
+
+ qw0 = cpu_to_le64(itct->qw0);
+ qw0 &= ~ITCT_HDR_VALID_MSK;
+ itct->qw0 = cpu_to_le64(qw0);
+}
+
static int reset_hw_v1_hw(struct hisi_hba *hisi_hba)
{
int i;
@@ -932,6 +954,253 @@ static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
return 0;
}
+/* by default, task resp is complete */
+static void slot_err_v1_hw(struct hisi_hba *hisi_hba,
+ struct sas_task *task,
+ struct hisi_sas_slot *slot)
+{
+ struct task_status_struct *ts = &task->task_status;
+ struct hisi_sas_err_record *err_record = slot->status_buffer;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ {
+ int error = -1;
+ u32 dma_err_type = cpu_to_le32(err_record->dma_err_type);
+ u32 dma_tx_err_type = ((dma_err_type &
+ ERR_HDR_DMA_TX_ERR_TYPE_MSK)) >>
+ ERR_HDR_DMA_TX_ERR_TYPE_OFF;
+ u32 dma_rx_err_type = ((dma_err_type &
+ ERR_HDR_DMA_RX_ERR_TYPE_MSK)) >>
+ ERR_HDR_DMA_RX_ERR_TYPE_OFF;
+ u32 trans_tx_fail_type =
+ cpu_to_le32(err_record->trans_tx_fail_type);
+ u32 trans_rx_fail_type =
+ cpu_to_le32(err_record->trans_rx_fail_type);
+
+ if (dma_tx_err_type) {
+ /* dma tx err */
+ error = ffs(dma_tx_err_type)
+ - 1 + DMA_TX_ERR_BASE;
+ } else if (dma_rx_err_type) {
+ /* dma rx err */
+ error = ffs(dma_rx_err_type)
+ - 1 + DMA_RX_ERR_BASE;
+ } else if (trans_tx_fail_type) {
+ /* trans tx err */
+ error = ffs(trans_tx_fail_type)
+ - 1 + TRANS_TX_FAIL_BASE;
+ } else if (trans_rx_fail_type) {
+ /* trans rx err */
+ error = ffs(trans_rx_fail_type)
+ - 1 + TRANS_RX_FAIL_BASE;
+ }
+
+ switch (error) {
+ case DMA_TX_DATA_UNDERFLOW_ERR:
+ case DMA_RX_DATA_UNDERFLOW_ERR:
+ {
+ ts->residual = 0;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ }
+ case DMA_TX_DATA_SGL_OVERFLOW_ERR:
+ case DMA_TX_DIF_SGL_OVERFLOW_ERR:
+ case DMA_TX_XFER_RDY_LENGTH_OVERFLOW_ERR:
+ case DMA_RX_DATA_OVERFLOW_ERR:
+ case TRANS_RX_FRAME_OVERRUN_ERR:
+ case TRANS_RX_LINK_BUF_OVERRUN_ERR:
+ {
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ break;
+ }
+ case TRANS_TX_PHY_NOT_ENABLE_ERR:
+ {
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ }
+ case TRANS_TX_OPEN_REJCT_WRONG_DEST_ERR:
+ case TRANS_TX_OPEN_REJCT_ZONE_VIOLATION_ERR:
+ case TRANS_TX_OPEN_REJCT_BY_OTHER_ERR:
+ case TRANS_TX_OPEN_REJCT_AIP_TIMEOUT_ERR:
+ case TRANS_TX_OPEN_REJCT_STP_BUSY_ERR:
+ case TRANS_TX_OPEN_REJCT_PROTOCOL_NOT_SUPPORT_ERR:
+ case TRANS_TX_OPEN_REJCT_RATE_NOT_SUPPORT_ERR:
+ case TRANS_TX_OPEN_REJCT_BAD_DEST_ERR:
+ case TRANS_TX_OPEN_BREAK_RECEIVE_ERR:
+ case TRANS_TX_OPEN_REJCT_PATHWAY_BLOCKED_ERR:
+ case TRANS_TX_OPEN_REJCT_NO_DEST_ERR:
+ case TRANS_TX_OPEN_RETRY_ERR:
+ {
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ }
+ case TRANS_TX_OPEN_TIMEOUT_ERR:
+ {
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+ case TRANS_TX_NAK_RECEIVE_ERR:
+ case TRANS_TX_ACK_NAK_TIMEOUT_ERR:
+ {
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ }
+ default:
+ {
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ }
+ }
+ }
+ break;
+ case SAS_PROTOCOL_SMP:
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ {
+ dev_err(dev, "slot err: SATA/STP not supported");
+ }
+ break;
+ default:
+ break;
+ }
+
+}
+
+static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot, int abort)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_device *sas_dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct task_status_struct *ts;
+ struct domain_device *device;
+ enum exec_status sts;
+ struct hisi_sas_complete_v1_hdr *complete_queue =
+ (struct hisi_sas_complete_v1_hdr *)
+ hisi_hba->complete_hdr[slot->cmplt_queue];
+ struct hisi_sas_complete_v1_hdr *complete_hdr;
+ u32 cmplt_hdr_data;
+
+ complete_hdr = &complete_queue[slot->cmplt_queue_slot];
+ cmplt_hdr_data = le32_to_cpu(complete_hdr->data);
+
+ if (unlikely(!task || !task->lldd_task || !task->dev))
+ return -EINVAL;
+
+ ts = &task->task_status;
+ device = task->dev;
+ sas_dev = device->lldd_dev;
+
+ task->task_state_flags &=
+ ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+
+ memset(ts, 0, sizeof(*ts));
+ ts->resp = SAS_TASK_COMPLETE;
+
+ if (unlikely(!sas_dev || abort)) {
+ if (!sas_dev)
+ dev_dbg(dev, "slot complete: port has not device\n");
+ ts->stat = SAS_PHY_DOWN;
+ goto out;
+ }
+
+ if (cmplt_hdr_data & CMPLT_HDR_IO_CFG_ERR_MSK) {
+ u32 info_reg = hisi_sas_read32(hisi_hba, HGC_INVLD_DQE_INFO);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_DQ_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_TYPE_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq type err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_FORCE_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq force phy err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_PHY_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq phy id err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_ABORT_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq abort flag err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_IPTT_OF_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq IPTT or ICT err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_SSP_ERR_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq SSP frame type err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ if (info_reg & HGC_INVLD_DQE_INFO_OFL_MSK)
+ dev_err(dev, "slot complete: [%d:%d] has dq order frame len err",
+ slot->cmplt_queue, slot->cmplt_queue_slot);
+
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ goto out;
+ }
+
+ if (cmplt_hdr_data & CMPLT_HDR_ERR_RCRD_XFRD_MSK) {
+ if (!(cmplt_hdr_data & CMPLT_HDR_CMD_CMPLT_MSK) ||
+ !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK))
+ ts->stat = SAS_DATA_OVERRUN;
+ else
+ slot_err_v1_hw(hisi_hba, task, slot);
+
+ goto out;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ {
+ struct ssp_response_iu *iu = slot->status_buffer +
+ sizeof(struct hisi_sas_err_record);
+ sas_ssp_task_response(dev, task, iu);
+ break;
+ }
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ dev_err(dev, "slot complete: SATA/STP not supported");
+ break;
+
+ default:
+ ts->stat = SAM_STAT_CHECK_CONDITION;
+ break;
+ }
+
+ if (!slot->port->port_attached) {
+ dev_err(dev, "slot complete: port %d has removed\n",
+ slot->port->sas_port.id);
+ ts->stat = SAS_PHY_DOWN;
+ }
+
+out:
+ if (sas_dev && sas_dev->running_req)
+ sas_dev->running_req--;
+
+ hisi_sas_slot_task_free(hisi_hba, task, slot);
+ sts = ts->stat;
+
+ if (task->task_done)
+ task->task_done(task);
+
+ return sts;
+}
+
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
@@ -1011,9 +1280,61 @@ end:
return res;
}
+
+static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_cq *cq = p;
+ struct hisi_hba *hisi_hba = cq->hisi_hba;
+ struct hisi_sas_slot *slot;
+ int queue = cq->id;
+ struct hisi_sas_complete_v1_hdr *complete_queue =
+ (struct hisi_sas_complete_v1_hdr *)
+ hisi_hba->complete_hdr[queue];
+ u32 irq_value, rd_point, wr_point;
+
+ irq_value = hisi_sas_read32(hisi_hba, OQ_INT_SRC);
+
+ hisi_sas_write32(hisi_hba, OQ_INT_SRC, 1 << queue);
+
+ rd_point = hisi_sas_read32(hisi_hba,
+ COMPL_Q_0_RD_PTR + (0x14 * queue));
+ wr_point = hisi_sas_read32(hisi_hba,
+ COMPL_Q_0_WR_PTR + (0x14 * queue));
+
+ while (rd_point != wr_point) {
+ struct hisi_sas_complete_v1_hdr *complete_hdr;
+ int idx;
+ u32 cmplt_hdr_data;
+
+ complete_hdr = &complete_queue[rd_point];
+ cmplt_hdr_data = cpu_to_le32(complete_hdr->data);
+ idx = (cmplt_hdr_data & CMPLT_HDR_IPTT_MSK) >>
+ CMPLT_HDR_IPTT_OFF;
+ slot = &hisi_hba->slot_info[idx];
+
+ /* The completion queue and queue slot index are not
+ * necessarily the same as the delivery queue and
+ * queue slot index.
+ */
+ slot->cmplt_queue_slot = rd_point;
+ slot->cmplt_queue = queue;
+ slot_complete_v1_hw(hisi_hba, slot, 0);
+
+ if (++rd_point >= HISI_SAS_QUEUE_SLOTS)
+ rd_point = 0;
+ }
+
+ /* update rd_point */
+ hisi_sas_write32(hisi_hba, COMPL_Q_0_RD_PTR + (0x14 * queue), rd_point);
+
+ return IRQ_HANDLED;
+}
+
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Phy Up"},
};
+
+static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phyup_v1_hw,
};
@@ -1056,6 +1377,28 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
}
}
}
+
+ idx = hisi_hba->n_phy * HISI_SAS_PHY_INT_NR;
+ for (i = 0; i < hisi_hba->queue_count; i++, idx++) {
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev, "irq init: could not map cq interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev), cq_int_name, i);
+ rc = devm_request_irq(dev, irq, cq_interrupt_v1_hw, 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ &hisi_hba->cq[i]);
+ if (rc) {
+ dev_err(dev, "irq init: could not request cq interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
return 0;
}
@@ -1110,9 +1453,11 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
.sl_notify = sl_notify_v1_hw,
+ .free_device = free_device_v1_hw,
.prep_ssp = prep_ssp_v1_hw,
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
+ .slot_complete = slot_complete_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add functions to deal with lldd_dev_found and lldd_dev_gone.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 13 +++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 88 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 41 ++++++++++++++++
3 files changed, 142 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index fe4055b..999f319 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -39,6 +39,7 @@
#define HISI_SAS_NAME_LEN 32
+struct hisi_hba;
enum {
PORT_TYPE_SAS = (1U << 1),
@@ -49,6 +50,13 @@ enum dev_status {
HISI_SAS_DEV_NORMAL,
HISI_SAS_DEV_EH,
};
+
+enum hisi_sas_dev_type {
+ HISI_SAS_DEV_TYPE_STP = 0,
+ HISI_SAS_DEV_TYPE_SSP,
+ HISI_SAS_DEV_TYPE_SATA,
+};
+
struct hisi_sas_phy {
struct hisi_hba *hisi_hba;
struct hisi_sas_port *port;
@@ -81,6 +89,9 @@ struct hisi_sas_cq {
struct hisi_sas_device {
enum sas_device_type dev_type;
+ struct hisi_hba *hisi_hba;
+ struct domain_device *sas_device;
+ u64 attached_phy;
u64 device_id;
u64 running_req;
u8 dev_status;
@@ -113,6 +124,8 @@ struct hisi_sas_tmf_task {
struct hisi_sas_hw {
int (*hw_init)(struct hisi_hba *hisi_hba);
+ void (*setup_itct)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *device);
void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
int (*get_free_slot)(struct hisi_hba *hisi_hba, int *q, int *s);
void (*start_delivery)(struct hisi_hba *hisi_hba);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index ddbd2b71..d8af4c6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -12,6 +12,9 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas"
+#define DEV_IS_EXPANDER(type) \
+ ((type == SAS_EDGE_EXPANDER_DEVICE) || \
+ (type == SAS_FANOUT_EXPANDER_DEVICE))
#define DEV_IS_GONE(dev) \
((!dev) || (dev->dev_type == SAS_PHY_UNUSED))
@@ -325,6 +328,72 @@ static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
sas_ha->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
}
+static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
+{
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct hisi_sas_device *sas_dev = NULL;
+ int i;
+
+ spin_lock(&hisi_hba->lock);
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
+ hisi_hba->devices[i].device_id = i;
+ sas_dev = &hisi_hba->devices[i];
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+ sas_dev->dev_type = device->dev_type;
+ sas_dev->hisi_hba = hisi_hba;
+ sas_dev->sas_device = device;
+ break;
+ }
+ }
+ spin_unlock(&hisi_hba->lock);
+
+ return sas_dev;
+}
+
+static int hisi_sas_dev_found(struct domain_device *device)
+{
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct domain_device *parent_dev = device->parent;
+ struct hisi_sas_device *sas_dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ sas_dev = hisi_sas_alloc_dev(device);
+ if (!sas_dev) {
+ dev_err(dev, "fail alloc dev: max support %d devices\n",
+ HISI_SAS_MAX_DEVICES);
+ return -EINVAL;
+ }
+
+ device->lldd_dev = sas_dev;
+ hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+ int phy_no;
+ u8 phy_num = parent_dev->ex_dev.num_phys;
+ struct ex_phy *phy;
+
+ for (phy_no = 0; phy_no < phy_num; phy_no++) {
+ phy = &parent_dev->ex_dev.ex_phy[phy_no];
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(device->sas_addr)) {
+ sas_dev->attached_phy = phy_no;
+ break;
+ }
+ }
+
+ if (phy_no == phy_num) {
+ dev_info(dev, "dev found: no attached "
+ "dev:%016llx at ex:%016llx\n",
+ SAS_ADDR(device->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr));
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static void hisi_sas_phyup_work(struct work_struct *work)
{
struct hisi_sas_phy *phy =
@@ -362,6 +431,23 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+static void hisi_sas_dev_gone(struct domain_device *device)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 dev_id = sas_dev->device_id;
+
+ dev_info(dev, "found dev[%lld:%x] is gone\n",
+ sas_dev->device_id, sas_dev->dev_type);
+
+ hisi_hba->hw->free_device(hisi_hba, sas_dev);
+ device->lldd_dev = NULL;
+ memset(sas_dev, 0, sizeof(*sas_dev));
+ sas_dev->device_id = dev_id;
+ sas_dev->dev_type = SAS_PHY_UNUSED;
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+}
static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
@@ -390,6 +476,8 @@ static struct scsi_host_template hisi_sas_sht = {
};
static struct sas_domain_function_template hisi_sas_transport_ops = {
+ .lldd_dev_found = hisi_sas_dev_found,
+ .lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 6711c0a..530e771 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -498,6 +498,46 @@ static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
config_id_frame_v1_hw(hisi_hba, i);
}
+static void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ struct domain_device *device = sas_dev->sas_device;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 qw0, device_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
+
+ memset(itct, 0, sizeof(*itct));
+
+ /* qw0 */
+ qw0 = 0;
+ switch (sas_dev->dev_type) {
+ case SAS_END_DEVICE:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
+ break;
+ default:
+ dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
+ sas_dev->dev_type);
+ }
+
+ qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
+ (1 << ITCT_HDR_AWT_CONTROL_OFF) |
+ (device->max_linkrate << ITCT_HDR_MAX_CONN_RATE_OFF) |
+ (1 << ITCT_HDR_VALID_LINK_NUM_OFF) |
+ (device->port->id << ITCT_HDR_PORT_ID_OFF));
+ itct->qw0 = cpu_to_le64(qw0);
+
+ /* qw1 */
+ memcpy(&itct->sas_addr, device->sas_addr, SAS_ADDR_SIZE);
+ itct->sas_addr = __swab64(itct->sas_addr);
+
+ /* qw2 */
+ itct->qw2 = cpu_to_le64((500 < ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
+ (0xff00 < ITCT_HDR_BUS_INACTIVE_TL_OFF) |
+ (0xff00 < ITCT_HDR_MAX_CONN_TL_OFF) |
+ (0xff00 < ITCT_HDR_REJ_OPEN_TL_OFF));
+}
static void free_device_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_device *sas_dev)
@@ -1452,6 +1492,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
+ .setup_itct = setup_itct_v1_hw,
.sl_notify = sl_notify_v1_hw,
.free_device = free_device_v1_hw,
.prep_ssp = prep_ssp_v1_hw,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add functions to deal with lldd_dev_found and lldd_dev_gone.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 13 +++++
drivers/scsi/hisi_sas/hisi_sas_main.c | 88 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 41 ++++++++++++++++
3 files changed, 142 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index fe4055b..999f319 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -39,6 +39,7 @@
#define HISI_SAS_NAME_LEN 32
+struct hisi_hba;
enum {
PORT_TYPE_SAS = (1U << 1),
@@ -49,6 +50,13 @@ enum dev_status {
HISI_SAS_DEV_NORMAL,
HISI_SAS_DEV_EH,
};
+
+enum hisi_sas_dev_type {
+ HISI_SAS_DEV_TYPE_STP = 0,
+ HISI_SAS_DEV_TYPE_SSP,
+ HISI_SAS_DEV_TYPE_SATA,
+};
+
struct hisi_sas_phy {
struct hisi_hba *hisi_hba;
struct hisi_sas_port *port;
@@ -81,6 +89,9 @@ struct hisi_sas_cq {
struct hisi_sas_device {
enum sas_device_type dev_type;
+ struct hisi_hba *hisi_hba;
+ struct domain_device *sas_device;
+ u64 attached_phy;
u64 device_id;
u64 running_req;
u8 dev_status;
@@ -113,6 +124,8 @@ struct hisi_sas_tmf_task {
struct hisi_sas_hw {
int (*hw_init)(struct hisi_hba *hisi_hba);
+ void (*setup_itct)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *device);
void (*sl_notify)(struct hisi_hba *hisi_hba, int phy_no);
int (*get_free_slot)(struct hisi_hba *hisi_hba, int *q, int *s);
void (*start_delivery)(struct hisi_hba *hisi_hba);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index ddbd2b71..d8af4c6 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -12,6 +12,9 @@
#include "hisi_sas.h"
#define DRV_NAME "hisi_sas"
+#define DEV_IS_EXPANDER(type) \
+ ((type == SAS_EDGE_EXPANDER_DEVICE) || \
+ (type == SAS_FANOUT_EXPANDER_DEVICE))
#define DEV_IS_GONE(dev) \
((!dev) || (dev->dev_type == SAS_PHY_UNUSED))
@@ -325,6 +328,72 @@ static void hisi_sas_bytes_dmaed(struct hisi_hba *hisi_hba, int phy_no)
sas_ha->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
}
+static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device)
+{
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct hisi_sas_device *sas_dev = NULL;
+ int i;
+
+ spin_lock(&hisi_hba->lock);
+ for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
+ if (hisi_hba->devices[i].dev_type == SAS_PHY_UNUSED) {
+ hisi_hba->devices[i].device_id = i;
+ sas_dev = &hisi_hba->devices[i];
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+ sas_dev->dev_type = device->dev_type;
+ sas_dev->hisi_hba = hisi_hba;
+ sas_dev->sas_device = device;
+ break;
+ }
+ }
+ spin_unlock(&hisi_hba->lock);
+
+ return sas_dev;
+}
+
+static int hisi_sas_dev_found(struct domain_device *device)
+{
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct domain_device *parent_dev = device->parent;
+ struct hisi_sas_device *sas_dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ sas_dev = hisi_sas_alloc_dev(device);
+ if (!sas_dev) {
+ dev_err(dev, "fail alloc dev: max support %d devices\n",
+ HISI_SAS_MAX_DEVICES);
+ return -EINVAL;
+ }
+
+ device->lldd_dev = sas_dev;
+ hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+ int phy_no;
+ u8 phy_num = parent_dev->ex_dev.num_phys;
+ struct ex_phy *phy;
+
+ for (phy_no = 0; phy_no < phy_num; phy_no++) {
+ phy = &parent_dev->ex_dev.ex_phy[phy_no];
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(device->sas_addr)) {
+ sas_dev->attached_phy = phy_no;
+ break;
+ }
+ }
+
+ if (phy_no == phy_num) {
+ dev_info(dev, "dev found: no attached "
+ "dev:%016llx at ex:%016llx\n",
+ SAS_ADDR(device->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr));
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static void hisi_sas_phyup_work(struct work_struct *work)
{
struct hisi_sas_phy *phy =
@@ -362,6 +431,23 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+static void hisi_sas_dev_gone(struct domain_device *device)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 dev_id = sas_dev->device_id;
+
+ dev_info(dev, "found dev[%lld:%x] is gone\n",
+ sas_dev->device_id, sas_dev->dev_type);
+
+ hisi_hba->hw->free_device(hisi_hba, sas_dev);
+ device->lldd_dev = NULL;
+ memset(sas_dev, 0, sizeof(*sas_dev));
+ sas_dev->device_id = dev_id;
+ sas_dev->dev_type = SAS_PHY_UNUSED;
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+}
static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
@@ -390,6 +476,8 @@ static struct scsi_host_template hisi_sas_sht = {
};
static struct sas_domain_function_template hisi_sas_transport_ops = {
+ .lldd_dev_found = hisi_sas_dev_found,
+ .lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
};
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 6711c0a..530e771 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -498,6 +498,46 @@ static void init_id_frame_v1_hw(struct hisi_hba *hisi_hba)
config_id_frame_v1_hw(hisi_hba, i);
}
+static void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_device *sas_dev)
+{
+ struct domain_device *device = sas_dev->sas_device;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u64 qw0, device_id = sas_dev->device_id;
+ struct hisi_sas_itct *itct = &hisi_hba->itct[device_id];
+
+ memset(itct, 0, sizeof(*itct));
+
+ /* qw0 */
+ qw0 = 0;
+ switch (sas_dev->dev_type) {
+ case SAS_END_DEVICE:
+ case SAS_EDGE_EXPANDER_DEVICE:
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ qw0 = HISI_SAS_DEV_TYPE_SSP << ITCT_HDR_DEV_TYPE_OFF;
+ break;
+ default:
+ dev_warn(dev, "setup itct: unsupported dev type (%d)\n",
+ sas_dev->dev_type);
+ }
+
+ qw0 |= ((1 << ITCT_HDR_VALID_OFF) |
+ (1 << ITCT_HDR_AWT_CONTROL_OFF) |
+ (device->max_linkrate << ITCT_HDR_MAX_CONN_RATE_OFF) |
+ (1 << ITCT_HDR_VALID_LINK_NUM_OFF) |
+ (device->port->id << ITCT_HDR_PORT_ID_OFF));
+ itct->qw0 = cpu_to_le64(qw0);
+
+ /* qw1 */
+ memcpy(&itct->sas_addr, device->sas_addr, SAS_ADDR_SIZE);
+ itct->sas_addr = __swab64(itct->sas_addr);
+
+ /* qw2 */
+ itct->qw2 = cpu_to_le64((500 < ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
+ (0xff00 < ITCT_HDR_BUS_INACTIVE_TL_OFF) |
+ (0xff00 < ITCT_HDR_MAX_CONN_TL_OFF) |
+ (0xff00 < ITCT_HDR_REJ_OPEN_TL_OFF));
+}
static void free_device_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_device *sas_dev)
@@ -1452,6 +1492,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
static const struct hisi_sas_hw hisi_sas_v1_hw = {
.hw_init = hisi_sas_v1_init,
+ .setup_itct = setup_itct_v1_hw,
.sl_notify = sl_notify_v1_hw,
.free_device = free_device_v1_hw,
.prep_ssp = prep_ssp_v1_hw,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add abnormal irq handler. This handler is concerned with
phy down event.
Also add port formed and port deformed handlers.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 118 +++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 70 +++++++++++++++++++
3 files changed, 190 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 999f319..e5ee3c9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -136,6 +136,7 @@ struct hisi_sas_hw {
struct hisi_sas_slot *slot, int abort);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
+ int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
int complete_hdr_size;
};
@@ -330,6 +331,7 @@ extern int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *ops);
extern int hisi_sas_remove(struct platform_device *pdev);
+extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
struct sas_task *task,
struct hisi_sas_slot *slot);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d8af4c6..1797851 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -431,6 +431,72 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct hisi_sas_port *port = &hisi_hba->port[sas_phy->id];
+ unsigned long flags;
+
+ if (!sas_port)
+ return;
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ port->port_attached = 1;
+ port->id = phy->port_id;
+ phy->port = port;
+ sas_port->lldd_port = port;
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+}
+
+static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, int phy_no,
+ struct domain_device *device)
+{
+ struct hisi_sas_phy *phy;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot, *slot2;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ phy = &hisi_hba->phy[phy_no];
+ port = phy->port;
+ if (!port)
+ return;
+
+ list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+ struct sas_task *task;
+
+ task = slot->task;
+ if (device && task->dev != device)
+ continue;
+
+ dev_info(dev, "Release slot [%d:%d], task [%p]:\n",
+ slot->dlvry_queue, slot->dlvry_queue_slot, task);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ }
+}
+
+static void hisi_sas_port_notify_deformed(struct asd_sas_phy *sas_phy)
+{
+ struct domain_device *device;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+
+ list_for_each_entry(device, &sas_port->dev_list, dev_list_node)
+ hisi_sas_do_release_task(phy->hisi_hba, sas_phy->id, device);
+}
+
+static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ struct asd_sas_port *port = device->port;
+ struct asd_sas_phy *sas_phy;
+
+ list_for_each_entry(sas_phy, &port->phy_list, port_phy_el)
+ hisi_sas_do_release_task(hisi_hba, sas_phy->id, device);
+}
+
static void hisi_sas_dev_gone(struct domain_device *device)
{
struct hisi_sas_device *sas_dev = device->lldd_dev;
@@ -454,6 +520,56 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
}
+
+static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_formed(sas_phy);
+}
+
+static void hisi_sas_port_deformed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_deformed(sas_phy);
+}
+
+static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
+{
+ phy->phy_attached = 0;
+ phy->phy_type = 0;
+ phy->port = NULL;
+}
+
+void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+
+ if (rdy) {
+ /* Phy down but ready */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+ hisi_sas_port_notify_formed(sas_phy);
+ } else {
+ struct hisi_sas_port *port = phy->port;
+
+ /* Phy down and not ready */
+ sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ sas_phy_disconnected(sas_phy);
+
+ if (port) {
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ int port_id = port->id;
+
+ if (!hisi_hba->hw->get_wideport_bitmap(hisi_hba,
+ port_id))
+ port->port_attached = 0;
+ } else if (phy->phy_type & PORT_TYPE_SATA)
+ port->port_attached = 0;
+ }
+ hisi_sas_phy_disconnected(phy);
+ }
+}
+EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -479,6 +595,8 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_port_formed = hisi_sas_port_formed,
+ .lldd_port_deformed = hisi_sas_port_deformed,
};
static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 530e771..1723dd4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -810,6 +810,18 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
+{
+ int i, bitmap = 0;
+ u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
+ bitmap |= 1 << i;
+
+ return bitmap;
+}
+
/**
* This function allocates across all queues to load balance.
* Slots are allocated from queues in a round-robin fashion.
@@ -1321,6 +1333,61 @@ end:
return res;
}
+static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ u32 irq_value, irq_mask_old;
+ int phy_no = sas_phy->id;
+
+ /* mask_int0 */
+ irq_mask_old = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3fffff);
+
+ /* read int0 */
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK) {
+ u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+
+ hisi_sas_phy_down(hisi_hba, phy_no,
+ (phy_state & 1 << phy_no) ? 1 : 0);
+ }
+
+ if (irq_value & CHL_INT0_ID_TIMEOUT_MSK)
+ dev_dbg(dev, "abnormal: ID_TIMEOUT phy%d identify timeout\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_DWS_LOST_MSK)
+ dev_dbg(dev, "abnormal: DWS_LOST phy%d dws lost\n", phy_no);
+
+ if (irq_value & CHL_INT0_SN_FAIL_NGR_MSK)
+ dev_dbg(dev, "abnormal: SN_FAIL_NGR phy%d sn fail ngr\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_IDAF_FAIL_MSK ||
+ irq_value & CHL_INT0_SL_OPAF_FAIL_MSK)
+ dev_dbg(dev, "abnormal: SL_ID/OPAF_FAIL phy%d check adr frm err\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_PS_FAIL_OFF)
+ dev_dbg(dev, "abnormal: SL_PS_FAIL phy%d fail\n", phy_no);
+
+ /* write to zero */
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, irq_value);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK)
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ else
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ irq_mask_old);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
{
struct hisi_sas_cq *cq = p;
@@ -1372,11 +1439,13 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Phy Up"},
+ {"Abnormal"},
};
static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phyup_v1_hw,
+ int_abnormal_v1_hw
};
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
@@ -1499,6 +1568,7 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
+ .get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add abnormal irq handler. This handler is concerned with
phy down event.
Also add port formed and port deformed handlers.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 2 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 118 +++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 70 +++++++++++++++++++
3 files changed, 190 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 999f319..e5ee3c9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -136,6 +136,7 @@ struct hisi_sas_hw {
struct hisi_sas_slot *slot, int abort);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
+ int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
int complete_hdr_size;
};
@@ -330,6 +331,7 @@ extern int hisi_sas_probe(struct platform_device *pdev,
const struct hisi_sas_hw *ops);
extern int hisi_sas_remove(struct platform_device *pdev);
+extern void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy);
extern void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba,
struct sas_task *task,
struct hisi_sas_slot *slot);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d8af4c6..1797851 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -431,6 +431,72 @@ static void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int phy_no)
INIT_WORK(&phy->phyup_ws, hisi_sas_phyup_work);
}
+static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct hisi_sas_port *port = &hisi_hba->port[sas_phy->id];
+ unsigned long flags;
+
+ if (!sas_port)
+ return;
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ port->port_attached = 1;
+ port->id = phy->port_id;
+ phy->port = port;
+ sas_port->lldd_port = port;
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+}
+
+static void hisi_sas_do_release_task(struct hisi_hba *hisi_hba, int phy_no,
+ struct domain_device *device)
+{
+ struct hisi_sas_phy *phy;
+ struct hisi_sas_port *port;
+ struct hisi_sas_slot *slot, *slot2;
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ phy = &hisi_hba->phy[phy_no];
+ port = phy->port;
+ if (!port)
+ return;
+
+ list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+ struct sas_task *task;
+
+ task = slot->task;
+ if (device && task->dev != device)
+ continue;
+
+ dev_info(dev, "Release slot [%d:%d], task [%p]:\n",
+ slot->dlvry_queue, slot->dlvry_queue_slot, task);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ }
+}
+
+static void hisi_sas_port_notify_deformed(struct asd_sas_phy *sas_phy)
+{
+ struct domain_device *device;
+ struct hisi_sas_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+
+ list_for_each_entry(device, &sas_port->dev_list, dev_list_node)
+ hisi_sas_do_release_task(phy->hisi_hba, sas_phy->id, device);
+}
+
+static void hisi_sas_release_task(struct hisi_hba *hisi_hba,
+ struct domain_device *device)
+{
+ struct asd_sas_port *port = device->port;
+ struct asd_sas_phy *sas_phy;
+
+ list_for_each_entry(sas_phy, &port->phy_list, port_phy_el)
+ hisi_sas_do_release_task(hisi_hba, sas_phy->id, device);
+}
+
static void hisi_sas_dev_gone(struct domain_device *device)
{
struct hisi_sas_device *sas_dev = device->lldd_dev;
@@ -454,6 +520,56 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
}
+
+static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_formed(sas_phy);
+}
+
+static void hisi_sas_port_deformed(struct asd_sas_phy *sas_phy)
+{
+ hisi_sas_port_notify_deformed(sas_phy);
+}
+
+static void hisi_sas_phy_disconnected(struct hisi_sas_phy *phy)
+{
+ phy->phy_attached = 0;
+ phy->phy_type = 0;
+ phy->port = NULL;
+}
+
+void hisi_sas_phy_down(struct hisi_hba *hisi_hba, int phy_no, int rdy)
+{
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha = &hisi_hba->sha;
+
+ if (rdy) {
+ /* Phy down but ready */
+ hisi_sas_bytes_dmaed(hisi_hba, phy_no);
+ hisi_sas_port_notify_formed(sas_phy);
+ } else {
+ struct hisi_sas_port *port = phy->port;
+
+ /* Phy down and not ready */
+ sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ sas_phy_disconnected(sas_phy);
+
+ if (port) {
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ int port_id = port->id;
+
+ if (!hisi_hba->hw->get_wideport_bitmap(hisi_hba,
+ port_id))
+ port->port_attached = 0;
+ } else if (phy->phy_type & PORT_TYPE_SATA)
+ port->port_attached = 0;
+ }
+ hisi_sas_phy_disconnected(phy);
+ }
+}
+EXPORT_SYMBOL_GPL(hisi_sas_phy_down);
+
static struct scsi_transport_template *hisi_sas_stt;
static struct scsi_host_template hisi_sas_sht = {
@@ -479,6 +595,8 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_port_formed = hisi_sas_port_formed,
+ .lldd_port_deformed = hisi_sas_port_deformed,
};
static int hisi_sas_alloc(struct hisi_hba *hisi_hba, struct Scsi_Host *shost)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 530e771..1723dd4 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -810,6 +810,18 @@ static void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, SL_CONTROL, sl_control);
}
+static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id)
+{
+ int i, bitmap = 0;
+ u32 phy_port_num_ma = hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA);
+
+ for (i = 0; i < hisi_hba->n_phy; i++)
+ if (((phy_port_num_ma >> (i * 4)) & 0xf) == port_id)
+ bitmap |= 1 << i;
+
+ return bitmap;
+}
+
/**
* This function allocates across all queues to load balance.
* Slots are allocated from queues in a round-robin fashion.
@@ -1321,6 +1333,61 @@ end:
return res;
}
+static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ u32 irq_value, irq_mask_old;
+ int phy_no = sas_phy->id;
+
+ /* mask_int0 */
+ irq_mask_old = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0_MSK);
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3fffff);
+
+ /* read int0 */
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK) {
+ u32 phy_state = hisi_sas_read32(hisi_hba, PHY_STATE);
+
+ hisi_sas_phy_down(hisi_hba, phy_no,
+ (phy_state & 1 << phy_no) ? 1 : 0);
+ }
+
+ if (irq_value & CHL_INT0_ID_TIMEOUT_MSK)
+ dev_dbg(dev, "abnormal: ID_TIMEOUT phy%d identify timeout\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_DWS_LOST_MSK)
+ dev_dbg(dev, "abnormal: DWS_LOST phy%d dws lost\n", phy_no);
+
+ if (irq_value & CHL_INT0_SN_FAIL_NGR_MSK)
+ dev_dbg(dev, "abnormal: SN_FAIL_NGR phy%d sn fail ngr\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_IDAF_FAIL_MSK ||
+ irq_value & CHL_INT0_SL_OPAF_FAIL_MSK)
+ dev_dbg(dev, "abnormal: SL_ID/OPAF_FAIL phy%d check adr frm err\n",
+ phy_no);
+
+ if (irq_value & CHL_INT0_SL_PS_FAIL_OFF)
+ dev_dbg(dev, "abnormal: SL_PS_FAIL phy%d fail\n", phy_no);
+
+ /* write to zero */
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, irq_value);
+
+ if (irq_value & CHL_INT0_PHYCTRL_NOTRDY_MSK)
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ 0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
+ else
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK,
+ irq_mask_old);
+
+ return IRQ_HANDLED;
+}
+
static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
{
struct hisi_sas_cq *cq = p;
@@ -1372,11 +1439,13 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Phy Up"},
+ {"Abnormal"},
};
static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phyup_v1_hw,
+ int_abnormal_v1_hw
};
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
@@ -1499,6 +1568,7 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
+ .get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
This is for expander broadcast event.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 1723dd4..ad50aed 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1333,6 +1333,35 @@ end:
return res;
}
+static irqreturn_t int_bcast_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+ struct device *dev = &hisi_hba->pdev->dev;
+ int phy_no = sas_phy->id;
+ u32 irq_value;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+
+ if (!(irq_value & CHL_INT2_SL_RX_BC_ACK_MSK)) {
+ dev_err(dev, "bcast: irq_value = %x not set enable bit",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_RX_BC_ACK_MSK);
+
+ return res;
+}
+
static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
{
struct hisi_sas_phy *phy = p;
@@ -1438,12 +1467,14 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
}
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
+ {"Bcast"},
{"Phy Up"},
{"Abnormal"},
};
static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_bcast_v1_hw,
int_phyup_v1_hw,
int_abnormal_v1_hw
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
This is for expander broadcast event.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 1723dd4..ad50aed 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1333,6 +1333,35 @@ end:
return res;
}
+static irqreturn_t int_bcast_v1_hw(int irq, void *p)
+{
+ struct hisi_sas_phy *phy = p;
+ struct hisi_hba *hisi_hba = phy->hisi_hba;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+ struct device *dev = &hisi_hba->pdev->dev;
+ int phy_no = sas_phy->id;
+ u32 irq_value;
+ irqreturn_t res = IRQ_HANDLED;
+
+ irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
+
+ if (!(irq_value & CHL_INT2_SL_RX_BC_ACK_MSK)) {
+ dev_err(dev, "bcast: irq_value = %x not set enable bit",
+ irq_value);
+ res = IRQ_NONE;
+ goto end;
+ }
+
+ sha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+
+end:
+ hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
+ CHL_INT2_SL_RX_BC_ACK_MSK);
+
+ return res;
+}
+
static irqreturn_t int_abnormal_v1_hw(int irq, void *p)
{
struct hisi_sas_phy *phy = p;
@@ -1438,12 +1467,14 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
}
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
+ {"Bcast"},
{"Phy Up"},
{"Abnormal"},
};
static const char cq_int_name[32] = "cq";
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
+ int_bcast_v1_hw,
int_phyup_v1_hw,
int_abnormal_v1_hw
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add support for smp function, which allows devices
attached by expander to be controlled
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 9 ++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 88 ++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index e5ee3c9..f34f73b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -36,6 +36,7 @@
(((sizeof(union hisi_sas_command_table)+3)/4)*4)
#define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
+#define HISI_SAS_MAX_SMP_RESP_SZ 1028
#define HISI_SAS_NAME_LEN 32
@@ -132,6 +133,8 @@ struct hisi_sas_hw {
int (*prep_ssp)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf);
+ int (*prep_smp)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot);
int (*slot_complete)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int abort);
void (*free_device)(struct hisi_hba *hisi_hba,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 1797851..406ffa0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -98,6 +98,12 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
}
EXPORT_SYMBOL_GPL(hisi_sas_slot_task_free);
+static int hisi_sas_task_prep_smp(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot)
+{
+ return hisi_hba->hw->prep_smp(hisi_hba, slot);
+}
+
static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf)
@@ -215,6 +221,9 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_hba *hisi_hba,
memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr));
switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = hisi_sas_task_prep_smp(hisi_hba, slot);
+ break;
case SAS_PROTOCOL_SSP:
rc = hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
break;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index ad50aed..64b17a1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -903,6 +903,74 @@ static int prep_prd_sge_v1_hw(struct hisi_hba *hisi_hba,
return 0;
}
+static int prep_smp_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+ struct domain_device *device = task->dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct hisi_sas_port *port = slot->port;
+ struct scatterlist *sg_req, *sg_resp;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ dma_addr_t req_dma_addr;
+ unsigned int req_len, resp_len;
+ int elem, rc;
+
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ /* req */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(dev, sg_req, 1, DMA_TO_DEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+ req_dma_addr = sg_dma_address(sg_req);
+
+ /* resp */
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(dev, sg_resp, 1, DMA_FROM_DEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out_req;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_resp;
+ }
+
+ /* create header */
+ /* dw0 */
+ hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
+ (1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
+ (1 << CMD_HDR_MODE_OFF) | /* ini mode */
+ (2 << CMD_HDR_CMD_OFF)); /* smp */
+
+ /* map itct entry */
+ hdr->dw1 = cpu_to_le32(sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF);
+
+ /* dw2 */
+ hdr->dw2 = cpu_to_le32((((req_len-4)/4) << CMD_HDR_CFL_OFF) |
+ (HISI_SAS_MAX_SMP_RESP_SZ/4 <<
+ CMD_HDR_MRFL_OFF));
+
+ hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
+
+ hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
+ hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+ return 0;
+
+err_out_resp:
+ dma_unmap_sg(dev, &slot->task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+err_out_req:
+ dma_unmap_sg(dev, &slot->task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ return rc;
+}
static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
@@ -1223,6 +1291,25 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
sas_ssp_task_response(dev, task, iu);
break;
}
+ case SAS_PROTOCOL_SMP:
+ {
+ void *to;
+ struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+
+ ts->stat = SAM_STAT_GOOD;
+ to = kmap_atomic(sg_page(sg_resp));
+
+ dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ memcpy(to + sg_resp->offset,
+ slot->status_buffer +
+ sizeof(struct hisi_sas_err_record),
+ sg_dma_len(sg_resp));
+ kunmap_atomic(to);
+ break;
+ }
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
@@ -1595,6 +1682,7 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.setup_itct = setup_itct_v1_hw,
.sl_notify = sl_notify_v1_hw,
.free_device = free_device_v1_hw,
+ .prep_smp = prep_smp_v1_hw,
.prep_ssp = prep_ssp_v1_hw,
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add support for smp function, which allows devices
attached by expander to be controlled
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 ++
drivers/scsi/hisi_sas/hisi_sas_main.c | 9 ++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 88 ++++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index e5ee3c9..f34f73b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -36,6 +36,7 @@
(((sizeof(union hisi_sas_command_table)+3)/4)*4)
#define HISI_SAS_MAX_SSP_RESP_SZ (sizeof(struct ssp_frame_hdr) + 1024)
+#define HISI_SAS_MAX_SMP_RESP_SZ 1028
#define HISI_SAS_NAME_LEN 32
@@ -132,6 +133,8 @@ struct hisi_sas_hw {
int (*prep_ssp)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf);
+ int (*prep_smp)(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot);
int (*slot_complete)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int abort);
void (*free_device)(struct hisi_hba *hisi_hba,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 1797851..406ffa0 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -98,6 +98,12 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
}
EXPORT_SYMBOL_GPL(hisi_sas_slot_task_free);
+static int hisi_sas_task_prep_smp(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot)
+{
+ return hisi_hba->hw->prep_smp(hisi_hba, slot);
+}
+
static int hisi_sas_task_prep_ssp(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
struct hisi_sas_tmf_task *tmf)
@@ -215,6 +221,9 @@ static int hisi_sas_task_prep(struct sas_task *task, struct hisi_hba *hisi_hba,
memset(slot->cmd_hdr, 0, sizeof(struct hisi_sas_cmd_hdr));
switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = hisi_sas_task_prep_smp(hisi_hba, slot);
+ break;
case SAS_PROTOCOL_SSP:
rc = hisi_sas_task_prep_ssp(hisi_hba, slot, is_tmf, tmf);
break;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index ad50aed..64b17a1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -903,6 +903,74 @@ static int prep_prd_sge_v1_hw(struct hisi_hba *hisi_hba,
return 0;
}
+static int prep_smp_v1_hw(struct hisi_hba *hisi_hba,
+ struct hisi_sas_slot *slot)
+{
+ struct sas_task *task = slot->task;
+ struct hisi_sas_cmd_hdr *hdr = slot->cmd_hdr;
+ struct domain_device *device = task->dev;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct hisi_sas_port *port = slot->port;
+ struct scatterlist *sg_req, *sg_resp;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ dma_addr_t req_dma_addr;
+ unsigned int req_len, resp_len;
+ int elem, rc;
+
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ /* req */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(dev, sg_req, 1, DMA_TO_DEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+ req_dma_addr = sg_dma_address(sg_req);
+
+ /* resp */
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(dev, sg_resp, 1, DMA_FROM_DEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out_req;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_resp;
+ }
+
+ /* create header */
+ /* dw0 */
+ hdr->dw0 = cpu_to_le32((port->id << CMD_HDR_PORT_OFF) |
+ (1 << CMD_HDR_PRIORITY_OFF) | /* high pri */
+ (1 << CMD_HDR_MODE_OFF) | /* ini mode */
+ (2 << CMD_HDR_CMD_OFF)); /* smp */
+
+ /* map itct entry */
+ hdr->dw1 = cpu_to_le32(sas_dev->device_id << CMD_HDR_DEVICE_ID_OFF);
+
+ /* dw2 */
+ hdr->dw2 = cpu_to_le32((((req_len-4)/4) << CMD_HDR_CFL_OFF) |
+ (HISI_SAS_MAX_SMP_RESP_SZ/4 <<
+ CMD_HDR_MRFL_OFF));
+
+ hdr->transfer_tags = cpu_to_le32(slot->idx << CMD_HDR_IPTT_OFF);
+
+ hdr->cmd_table_addr = cpu_to_le64(req_dma_addr);
+ hdr->sts_buffer_addr = cpu_to_le64(slot->status_buffer_dma);
+
+ return 0;
+
+err_out_resp:
+ dma_unmap_sg(dev, &slot->task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+err_out_req:
+ dma_unmap_sg(dev, &slot->task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ return rc;
+}
static int prep_ssp_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int is_tmf,
@@ -1223,6 +1291,25 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
sas_ssp_task_response(dev, task, iu);
break;
}
+ case SAS_PROTOCOL_SMP:
+ {
+ void *to;
+ struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+
+ ts->stat = SAM_STAT_GOOD;
+ to = kmap_atomic(sg_page(sg_resp));
+
+ dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
+ DMA_FROM_DEVICE);
+ dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
+ DMA_TO_DEVICE);
+ memcpy(to + sg_resp->offset,
+ slot->status_buffer +
+ sizeof(struct hisi_sas_err_record),
+ sg_dma_len(sg_resp));
+ kunmap_atomic(to);
+ break;
+ }
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
@@ -1595,6 +1682,7 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.setup_itct = setup_itct_v1_hw,
.sl_notify = sl_notify_v1_hw,
.free_device = free_device_v1_hw,
+ .prep_smp = prep_smp_v1_hw,
.prep_ssp = prep_ssp_v1_hw,
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add functions for scsi host template scan_finished
and scan_start methods
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index f34f73b..15adeca 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -156,6 +156,7 @@ struct hisi_hba {
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
+ int scan_finished;
spinlock_t lock;
struct timer_list timer;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 406ffa0..63ebaf3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -403,6 +403,29 @@ static int hisi_sas_dev_found(struct domain_device *device)
return 0;
}
+static void hisi_sas_scan_start(struct Scsi_Host *shost)
+{
+ struct hisi_hba *hisi_hba = shost_priv(shost);
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; ++i)
+ hisi_sas_bytes_dmaed(hisi_hba, i);
+
+ hisi_hba->scan_finished = 1;
+}
+
+static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct hisi_hba *hisi_hba = shost_priv(shost);
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+
+ if (hisi_hba->scan_finished == 0)
+ return 0;
+
+ sas_drain_work(sha);
+ return 1;
+}
+
static void hisi_sas_phyup_work(struct work_struct *work)
{
struct hisi_sas_phy *phy =
@@ -587,6 +610,8 @@ static struct scsi_host_template hisi_sas_sht = {
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
+ .scan_finished = hisi_sas_scan_finished,
+ .scan_start = hisi_sas_scan_start,
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.can_queue = 1,
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add functions for scsi host template scan_finished
and scan_start methods
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 25 +++++++++++++++++++++++++
2 files changed, 26 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index f34f73b..15adeca 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -156,6 +156,7 @@ struct hisi_hba {
u8 sas_addr[SAS_ADDR_SIZE];
int n_phy;
+ int scan_finished;
spinlock_t lock;
struct timer_list timer;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 406ffa0..63ebaf3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -403,6 +403,29 @@ static int hisi_sas_dev_found(struct domain_device *device)
return 0;
}
+static void hisi_sas_scan_start(struct Scsi_Host *shost)
+{
+ struct hisi_hba *hisi_hba = shost_priv(shost);
+ int i;
+
+ for (i = 0; i < hisi_hba->n_phy; ++i)
+ hisi_sas_bytes_dmaed(hisi_hba, i);
+
+ hisi_hba->scan_finished = 1;
+}
+
+static int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ struct hisi_hba *hisi_hba = shost_priv(shost);
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+
+ if (hisi_hba->scan_finished == 0)
+ return 0;
+
+ sas_drain_work(sha);
+ return 1;
+}
+
static void hisi_sas_phyup_work(struct work_struct *work)
{
struct hisi_sas_phy *phy =
@@ -587,6 +610,8 @@ static struct scsi_host_template hisi_sas_sht = {
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
.slave_configure = sas_slave_configure,
+ .scan_finished = hisi_sas_scan_finished,
+ .scan_start = hisi_sas_scan_start,
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.can_queue = 1,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 29/32] scsi: hisi_sas: add tmf methods
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add function methods for tmf's.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 309 ++++++++++++++++++++++++++++++++++
1 file changed, 309 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 63ebaf3..4ee90eb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -553,6 +553,309 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
}
+static void hisi_sas_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->slow_task->timer))
+ return;
+ complete(&task->slow_task->completion);
+}
+
+static void hisi_sas_tmf_timedout(unsigned long data)
+{
+ struct sas_task *task = (struct sas_task *)data;
+
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ complete(&task->slow_task->completion);
+}
+
+#define TASK_TIMEOUT 20
+#define TASK_RETRY 3
+static int hisi_sas_exec_internal_tmf_task(struct domain_device *device,
+ void *parameter, u32 para_len,
+ struct hisi_sas_tmf_task *tmf)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = sas_dev->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct sas_task *task;
+ int res, retry;
+
+ for (retry = 0; retry < TASK_RETRY; retry++) {
+ task = sas_alloc_slow_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = device;
+ task->task_proto = device->tproto;
+
+ memcpy(&task->ssp_task, parameter, para_len);
+ task->task_done = hisi_sas_task_done;
+
+ task->slow_task->timer.data = (unsigned long) task;
+ task->slow_task->timer.function = hisi_sas_tmf_timedout;
+ task->slow_task->timer.expires = jiffies + TASK_TIMEOUT*HZ;
+ add_timer(&task->slow_task->timer);
+
+ res = hisi_sas_task_exec(task, GFP_KERNEL, 1, tmf);
+
+ if (res) {
+ del_timer(&task->slow_task->timer);
+ dev_err(dev, "abort tmf: executing internal task failed: %d\n",
+ res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->slow_task->completion);
+ res = TMF_RESP_FUNC_FAILED;
+ /* Even TMF timed out, return direct. */
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ dev_err(dev, "abort tmf: TMF task[%d] timeout\n",
+ tmf->tag_of_task_to_be_managed);
+ if (task->lldd_task) {
+ struct hisi_sas_slot *slot =
+ task->lldd_task;
+
+ hisi_sas_slot_task_free(hisi_hba,
+ task, slot);
+ }
+
+ goto ex_err;
+ }
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_STAT_GOOD) {
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun
+ */
+ dev_warn(dev, "abort tmf: task to dev %016llx "
+ "resp: 0x%x sts 0x%x underrun\n",
+ SAS_ADDR(device->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ res = task->task_status.residual;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ dev_warn(dev, "abort tmf: blocked task error\n");
+ res = -EMSGSIZE;
+ break;
+ }
+
+ dev_warn(dev, "abort tmf: task to dev "
+ "%016llx resp: 0x%x status 0x%x\n",
+ SAS_ADDR(device->sas_addr), task->task_status.resp,
+ task->task_status.stat);
+ sas_free_task(task);
+ task = NULL;
+ }
+ex_err:
+ WARN_ON(retry == TASK_RETRY);
+ sas_free_task(task);
+ return res;
+}
+
+static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
+ u8 *lun, struct hisi_sas_tmf_task *tmf)
+{
+ struct sas_ssp_task ssp_task;
+
+ if (!(device->tproto & SAS_PROTOCOL_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ memcpy(ssp_task.LUN, lun, 8);
+
+ return hisi_sas_exec_internal_tmf_task(device, &ssp_task,
+ sizeof(ssp_task), tmf);
+}
+
+static int hisi_sas_abort_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct hisi_sas_tmf_task tmf_task;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev);
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+
+ if (!sas_dev) {
+ dev_warn(dev, "Device has been removed\n");
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ sas_dev->dev_status = HISI_SAS_DEV_EH;
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct hisi_sas_slot *slot = task->lldd_task;
+ u32 tag = slot->idx;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ tmf_task.tmf = TMF_ABORT_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = hisi_sas_debug_issue_ssp_tmf(task->dev, lun.scsi_lun,
+ &tmf_task);
+
+ /* if successful, clear the task and callback forwards.*/
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ if (task->lldd_task) {
+ struct hisi_sas_slot *slot;
+
+ slot = &hisi_hba->slot_info
+ [tmf_task.tag_of_task_to_be_managed];
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ }
+ }
+
+ } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+ task->task_proto & SAS_PROTOCOL_STP) {
+ if (task->dev->dev_type == SAS_SATA_DEV) {
+ struct hisi_slot_info *slot = task->lldd_task;
+
+ dev_notice(dev, "abort task: hba=%p task=%p slot=%p\n",
+ hisi_hba, task, slot);
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ }
+
+out:
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ dev_notice(dev, "abort task: rc=%d\n", rc);
+ return rc;
+}
+
+static int hisi_sas_abort_task_set(struct domain_device *device, u8 *lun)
+{
+ struct hisi_sas_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ tmf_task.tmf = TMF_ABORT_TASK_SET;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+
+ return rc;
+}
+
+static int hisi_sas_clear_aca(struct domain_device *device, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct hisi_sas_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_CLEAR_ACA;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+
+ return rc;
+}
+
+static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
+{
+ struct sas_phy *phy = sas_get_local_phy(device);
+ int rc, reset_type = (device->dev_type == SAS_SATA_DEV ||
+ (device->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+ rc = sas_phy_reset(phy, reset_type);
+ sas_put_local_phy(phy);
+ msleep(2000);
+ return rc;
+}
+
+static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ unsigned long flags;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (sas_dev->dev_status != HISI_SAS_DEV_EH)
+ return TMF_RESP_FUNC_FAILED;
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+
+ rc = hisi_sas_debug_I_T_nexus_reset(device);
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_task(hisi_hba, device);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ return 0;
+}
+
+static int hisi_sas_lu_reset(struct domain_device *device, u8 *lun)
+{
+ struct hisi_sas_tmf_task tmf_task;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct device *dev = &hisi_hba->pdev->dev;
+ unsigned long flags;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ tmf_task.tmf = TMF_LU_RESET;
+ sas_dev->dev_status = HISI_SAS_DEV_EH;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_task(hisi_hba, device);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ }
+
+ /* If failed, fall-through I_T_Nexus reset */
+ dev_err(dev, "lu_reset: for device[%llx]:rc= %d\n",
+ sas_dev->device_id, rc);
+ return rc;
+}
+
+static int hisi_sas_query_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct hisi_sas_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_slot *slot = task->lldd_task;
+ u32 tag = slot->idx;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ tmf_task.tmf = TMF_QUERY_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = hisi_sas_debug_issue_ssp_tmf(device,
+ lun.scsi_lun,
+ &tmf_task);
+ switch (rc) {
+ /* The task is still in Lun, release it then */
+ case TMF_RESP_FUNC_SUCC:
+ /* The task is not in Lun or failed, reset the phy */
+ case TMF_RESP_FUNC_FAILED:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ }
+ }
+ return rc;
+}
+
static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
{
hisi_sas_port_notify_formed(sas_phy);
@@ -629,6 +932,12 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_abort_task = hisi_sas_abort_task,
+ .lldd_abort_task_set = hisi_sas_abort_task_set,
+ .lldd_clear_aca = hisi_sas_clear_aca,
+ .lldd_I_T_nexus_reset = hisi_sas_I_T_nexus_reset,
+ .lldd_lu_reset = hisi_sas_lu_reset,
+ .lldd_query_task = hisi_sas_query_task,
.lldd_port_formed = hisi_sas_port_formed,
.lldd_port_deformed = hisi_sas_port_deformed,
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 29/32] scsi: hisi_sas: add tmf methods
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add function methods for tmf's.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 309 ++++++++++++++++++++++++++++++++++
1 file changed, 309 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 63ebaf3..4ee90eb 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -553,6 +553,309 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
}
+static void hisi_sas_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->slow_task->timer))
+ return;
+ complete(&task->slow_task->completion);
+}
+
+static void hisi_sas_tmf_timedout(unsigned long data)
+{
+ struct sas_task *task = (struct sas_task *)data;
+
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ complete(&task->slow_task->completion);
+}
+
+#define TASK_TIMEOUT 20
+#define TASK_RETRY 3
+static int hisi_sas_exec_internal_tmf_task(struct domain_device *device,
+ void *parameter, u32 para_len,
+ struct hisi_sas_tmf_task *tmf)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = sas_dev->hisi_hba;
+ struct device *dev = &hisi_hba->pdev->dev;
+ struct sas_task *task;
+ int res, retry;
+
+ for (retry = 0; retry < TASK_RETRY; retry++) {
+ task = sas_alloc_slow_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = device;
+ task->task_proto = device->tproto;
+
+ memcpy(&task->ssp_task, parameter, para_len);
+ task->task_done = hisi_sas_task_done;
+
+ task->slow_task->timer.data = (unsigned long) task;
+ task->slow_task->timer.function = hisi_sas_tmf_timedout;
+ task->slow_task->timer.expires = jiffies + TASK_TIMEOUT*HZ;
+ add_timer(&task->slow_task->timer);
+
+ res = hisi_sas_task_exec(task, GFP_KERNEL, 1, tmf);
+
+ if (res) {
+ del_timer(&task->slow_task->timer);
+ dev_err(dev, "abort tmf: executing internal task failed: %d\n",
+ res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->slow_task->completion);
+ res = TMF_RESP_FUNC_FAILED;
+ /* Even TMF timed out, return direct. */
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ dev_err(dev, "abort tmf: TMF task[%d] timeout\n",
+ tmf->tag_of_task_to_be_managed);
+ if (task->lldd_task) {
+ struct hisi_sas_slot *slot =
+ task->lldd_task;
+
+ hisi_sas_slot_task_free(hisi_hba,
+ task, slot);
+ }
+
+ goto ex_err;
+ }
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_STAT_GOOD) {
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun
+ */
+ dev_warn(dev, "abort tmf: task to dev %016llx "
+ "resp: 0x%x sts 0x%x underrun\n",
+ SAS_ADDR(device->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ res = task->task_status.residual;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ dev_warn(dev, "abort tmf: blocked task error\n");
+ res = -EMSGSIZE;
+ break;
+ }
+
+ dev_warn(dev, "abort tmf: task to dev "
+ "%016llx resp: 0x%x status 0x%x\n",
+ SAS_ADDR(device->sas_addr), task->task_status.resp,
+ task->task_status.stat);
+ sas_free_task(task);
+ task = NULL;
+ }
+ex_err:
+ WARN_ON(retry == TASK_RETRY);
+ sas_free_task(task);
+ return res;
+}
+
+static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
+ u8 *lun, struct hisi_sas_tmf_task *tmf)
+{
+ struct sas_ssp_task ssp_task;
+
+ if (!(device->tproto & SAS_PROTOCOL_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ memcpy(ssp_task.LUN, lun, 8);
+
+ return hisi_sas_exec_internal_tmf_task(device, &ssp_task,
+ sizeof(ssp_task), tmf);
+}
+
+static int hisi_sas_abort_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct hisi_sas_tmf_task tmf_task;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(task->dev);
+ struct device *dev = &hisi_hba->pdev->dev;
+ int rc = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+
+ if (!sas_dev) {
+ dev_warn(dev, "Device has been removed\n");
+ return TMF_RESP_FUNC_FAILED;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ sas_dev->dev_status = HISI_SAS_DEV_EH;
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct hisi_sas_slot *slot = task->lldd_task;
+ u32 tag = slot->idx;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ tmf_task.tmf = TMF_ABORT_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = hisi_sas_debug_issue_ssp_tmf(task->dev, lun.scsi_lun,
+ &tmf_task);
+
+ /* if successful, clear the task and callback forwards.*/
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ if (task->lldd_task) {
+ struct hisi_sas_slot *slot;
+
+ slot = &hisi_hba->slot_info
+ [tmf_task.tag_of_task_to_be_managed];
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_hba->hw->slot_complete(hisi_hba, slot, 1);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ }
+ }
+
+ } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+ task->task_proto & SAS_PROTOCOL_STP) {
+ if (task->dev->dev_type == SAS_SATA_DEV) {
+ struct hisi_slot_info *slot = task->lldd_task;
+
+ dev_notice(dev, "abort task: hba=%p task=%p slot=%p\n",
+ hisi_hba, task, slot);
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+
+ }
+
+out:
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ dev_notice(dev, "abort task: rc=%d\n", rc);
+ return rc;
+}
+
+static int hisi_sas_abort_task_set(struct domain_device *device, u8 *lun)
+{
+ struct hisi_sas_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ tmf_task.tmf = TMF_ABORT_TASK_SET;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+
+ return rc;
+}
+
+static int hisi_sas_clear_aca(struct domain_device *device, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct hisi_sas_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_CLEAR_ACA;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+
+ return rc;
+}
+
+static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device)
+{
+ struct sas_phy *phy = sas_get_local_phy(device);
+ int rc, reset_type = (device->dev_type == SAS_SATA_DEV ||
+ (device->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+ rc = sas_phy_reset(phy, reset_type);
+ sas_put_local_phy(phy);
+ msleep(2000);
+ return rc;
+}
+
+static int hisi_sas_I_T_nexus_reset(struct domain_device *device)
+{
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ unsigned long flags;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (sas_dev->dev_status != HISI_SAS_DEV_EH)
+ return TMF_RESP_FUNC_FAILED;
+ sas_dev->dev_status = HISI_SAS_DEV_NORMAL;
+
+ rc = hisi_sas_debug_I_T_nexus_reset(device);
+
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_task(hisi_hba, device);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+
+ return 0;
+}
+
+static int hisi_sas_lu_reset(struct domain_device *device, u8 *lun)
+{
+ struct hisi_sas_tmf_task tmf_task;
+ struct hisi_sas_device *sas_dev = device->lldd_dev;
+ struct hisi_hba *hisi_hba = dev_to_hisi_hba(device);
+ struct device *dev = &hisi_hba->pdev->dev;
+ unsigned long flags;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ tmf_task.tmf = TMF_LU_RESET;
+ sas_dev->dev_status = HISI_SAS_DEV_EH;
+ rc = hisi_sas_debug_issue_ssp_tmf(device, lun, &tmf_task);
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ spin_lock_irqsave(&hisi_hba->lock, flags);
+ hisi_sas_release_task(hisi_hba, device);
+ spin_unlock_irqrestore(&hisi_hba->lock, flags);
+ }
+
+ /* If failed, fall-through I_T_Nexus reset */
+ dev_err(dev, "lu_reset: for device[%llx]:rc= %d\n",
+ sas_dev->device_id, rc);
+ return rc;
+}
+
+static int hisi_sas_query_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct hisi_sas_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct domain_device *device = task->dev;
+ struct hisi_sas_slot *slot = task->lldd_task;
+ u32 tag = slot->idx;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ tmf_task.tmf = TMF_QUERY_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = hisi_sas_debug_issue_ssp_tmf(device,
+ lun.scsi_lun,
+ &tmf_task);
+ switch (rc) {
+ /* The task is still in Lun, release it then */
+ case TMF_RESP_FUNC_SUCC:
+ /* The task is not in Lun or failed, reset the phy */
+ case TMF_RESP_FUNC_FAILED:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ }
+ }
+ return rc;
+}
+
static void hisi_sas_port_formed(struct asd_sas_phy *sas_phy)
{
hisi_sas_port_notify_formed(sas_phy);
@@ -629,6 +932,12 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_abort_task = hisi_sas_abort_task,
+ .lldd_abort_task_set = hisi_sas_abort_task_set,
+ .lldd_clear_aca = hisi_sas_clear_aca,
+ .lldd_I_T_nexus_reset = hisi_sas_I_T_nexus_reset,
+ .lldd_lu_reset = hisi_sas_lu_reset,
+ .lldd_query_task = hisi_sas_query_task,
.lldd_port_formed = hisi_sas_port_formed,
.lldd_port_deformed = hisi_sas_port_deformed,
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 30/32] scsi: hisi_sas: add control phy handler
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add method for lldd_control_phy. Currently link rate
control and spinup hold is unsupported.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 +++
drivers/scsi/hisi_sas/hisi_sas_main.c | 29 +++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 23 +++++++++++++++++++++++
3 files changed, 55 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 15adeca..5b790c9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -137,6 +137,9 @@ struct hisi_sas_hw {
struct hisi_sas_slot *slot);
int (*slot_complete)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int abort);
+ void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4ee90eb..1377625 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -552,6 +552,34 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
}
+static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ int phy_no = sas_phy->id;
+
+ switch (func) {
+ case PHY_FUNC_HARD_RESET:
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ hisi_hba->hw->phy_enable(hisi_hba, phy_no);
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_SET_LINK_RATE:
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
static void hisi_sas_task_done(struct sas_task *task)
{
@@ -932,6 +960,7 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_control_phy = hisi_sas_control_phy,
.lldd_abort_task = hisi_sas_abort_task,
.lldd_abort_task_set = hisi_sas_abort_task_set,
.lldd_clear_aca = hisi_sas_clear_aca,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 64b17a1..a95259c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -764,6 +764,14 @@ static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
}
+static void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
{
config_id_frame_v1_hw(hisi_hba, phy_no);
@@ -772,6 +780,18 @@ static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v1_hw(hisi_hba, phy_no);
}
+static void stop_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ disable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void phy_hard_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ stop_phy_v1_hw(hisi_hba, phy_no);
+ msleep(100);
+ start_phy_v1_hw(hisi_hba, phy_no);
+}
+
static void start_phys_v1_hw(unsigned long data)
{
struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
@@ -1687,6 +1707,9 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
+ .phy_enable = enable_phy_v1_hw,
+ .phy_disable = disable_phy_v1_hw,
+ .phy_hard_reset = phy_hard_reset_v1_hw,
.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 30/32] scsi: hisi_sas: add control phy handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add method for lldd_control_phy. Currently link rate
control and spinup hold is unsupported.
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas.h | 3 +++
drivers/scsi/hisi_sas/hisi_sas_main.c | 29 +++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 23 +++++++++++++++++++++++
3 files changed, 55 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index 15adeca..5b790c9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -137,6 +137,9 @@ struct hisi_sas_hw {
struct hisi_sas_slot *slot);
int (*slot_complete)(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot, int abort);
+ void (*phy_enable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_disable)(struct hisi_hba *hisi_hba, int phy_no);
+ void (*phy_hard_reset)(struct hisi_hba *hisi_hba, int phy_no);
void (*free_device)(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
int (*get_wideport_bitmap)(struct hisi_hba *hisi_hba, int port_id);
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 4ee90eb..1377625 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -552,6 +552,34 @@ static int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, 0, NULL);
}
+static int hisi_sas_control_phy(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
+ int phy_no = sas_phy->id;
+
+ switch (func) {
+ case PHY_FUNC_HARD_RESET:
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ hisi_hba->hw->phy_enable(hisi_hba, phy_no);
+ hisi_hba->hw->phy_hard_reset(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ hisi_hba->hw->phy_disable(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_SET_LINK_RATE:
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
static void hisi_sas_task_done(struct sas_task *task)
{
@@ -932,6 +960,7 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_control_phy = hisi_sas_control_phy,
.lldd_abort_task = hisi_sas_abort_task,
.lldd_abort_task_set = hisi_sas_abort_task_set,
.lldd_clear_aca = hisi_sas_clear_aca,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 64b17a1..a95259c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -764,6 +764,14 @@ static void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
}
+static void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
+
static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
{
config_id_frame_v1_hw(hisi_hba, phy_no);
@@ -772,6 +780,18 @@ static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v1_hw(hisi_hba, phy_no);
}
+static void stop_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ disable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+static void phy_hard_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ stop_phy_v1_hw(hisi_hba, phy_no);
+ msleep(100);
+ start_phy_v1_hw(hisi_hba, phy_no);
+}
+
static void start_phys_v1_hw(unsigned long data)
{
struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
@@ -1687,6 +1707,9 @@ static const struct hisi_sas_hw hisi_sas_v1_hw = {
.get_free_slot = get_free_slot_v1_hw,
.start_delivery = start_delivery_v1_hw,
.slot_complete = slot_complete_v1_hw,
+ .phy_enable = enable_phy_v1_hw,
+ .phy_disable = disable_phy_v1_hw,
+ .phy_hard_reset = phy_hard_reset_v1_hw,
.get_wideport_bitmap = get_wideport_bitmap_v1_hw,
.complete_hdr_size = sizeof(struct hisi_sas_complete_v1_hdr),
};
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add handlers for fatal interrupts
Signed-off-by: John Garry <john.garry@huawei.com>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 119 +++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index a95259c..e29b7c7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1573,6 +1573,93 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
return IRQ_HANDLED;
}
+static irqreturn_t fatal_ecc_int_v1_hw(int irq, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 ecc_int = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
+
+ if (ecc_int & SAS_ECC_INTR_DQ_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal DQ 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_DQ_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_DQ_ECC_ADDR) &
+ HGC_DQ_ECC_ADDR_BAD_MSK) >>
+ HGC_DQ_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal DQ RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_IOST_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal IOST 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_IOST_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR) &
+ HGC_IOST_ECC_ADDR_BAD_MSK) >>
+ HGC_IOST_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal IOST RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_ITCT_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR) &
+ HGC_ITCT_ECC_ADDR_BAD_MSK) >>
+ HGC_ITCT_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal TCT RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_ITCT_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal ITCT 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR, ecc_int | 0x3f);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fatal_axi_int_v1_hw(int irq, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 axi_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC2);
+ u32 axi_info = hisi_sas_read32(hisi_hba, HGC_AXI_FIFO_ERR_INFO);
+
+ if (axi_int & ENT_INT_SRC2_DQ_CFG_ERR_MSK)
+ panic("%s: Fatal DQ_CFG_ERR interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_CQ_CFG_ERR_MSK)
+ panic("%s: Fatal CQ_CFG_ERR interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_AXI_WRONG_INT_MSK)
+ panic("%s: Fatal AXI_WRONG_INT interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_AXI_OVERLF_INT_MSK)
+ panic("%s: Fatal AXI_OVERLF_INT incorrect interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, axi_int | 0x30000000);
+
+ return IRQ_HANDLED;
+}
+
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Bcast"},
{"Phy Up"},
@@ -1580,12 +1667,22 @@ static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
};
static const char cq_int_name[32] = "cq";
+static const char fatal_int_name[HISI_SAS_FATAL_INT_NR][32] = {
+ "fatal ecc",
+ "fatal axi"
+};
+
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_bcast_v1_hw,
int_phyup_v1_hw,
int_abnormal_v1_hw
};
+static irq_handler_t fatal_interrupts[HISI_SAS_MAX_QUEUES] = {
+ fatal_ecc_int_v1_hw,
+ fatal_axi_int_v1_hw
+};
+
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = &hisi_hba->pdev->dev;
@@ -1646,6 +1743,28 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
}
}
+ idx = (hisi_hba->n_phy * HISI_SAS_PHY_INT_NR) + hisi_hba->queue_count;
+ for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++, idx++) {
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev, "irq init: could not map fatal interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev), fatal_int_name[i], i);
+ rc = devm_request_irq(dev, irq, fatal_interrupts[i], 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ hisi_hba);
+ if (rc) {
+ dev_err(dev,
+ "irq init: could not request fatal interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
return 0;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley-wo1vFcy6AUs, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
pawel.moll-5wv7dgnIgG8, mark.rutland-5wv7dgnIgG8,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg,
galak-sgV2jX0FEOL9JmXXK+q4OQ, arnd-r2nGTMty4D4
Cc: linux-scsi-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linuxarm-hv44wF8Li93QT0dZR+AlfA,
john.garry2-s/0ZXS5h9803lw97EnAbAg, hare-l3A5Bk7waGM,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A,
john.garry-hv44wF8Li93QT0dZR+AlfA
Add handlers for fatal interrupts
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 119 +++++++++++++++++++++++++++++++++
1 file changed, 119 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index a95259c..e29b7c7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1573,6 +1573,93 @@ static irqreturn_t cq_interrupt_v1_hw(int irq, void *p)
return IRQ_HANDLED;
}
+static irqreturn_t fatal_ecc_int_v1_hw(int irq, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 ecc_int = hisi_sas_read32(hisi_hba, SAS_ECC_INTR);
+
+ if (ecc_int & SAS_ECC_INTR_DQ_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal DQ 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_DQ_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_DQ_ECC_ADDR) &
+ HGC_DQ_ECC_ADDR_BAD_MSK) >>
+ HGC_DQ_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal DQ RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_IOST_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal IOST 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_IOST_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_IOST_ECC_ADDR) &
+ HGC_IOST_ECC_ADDR_BAD_MSK) >>
+ HGC_IOST_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal IOST RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_ITCT_ECCBAD_MSK) {
+ u32 addr = (hisi_sas_read32(hisi_hba, HGC_ITCT_ECC_ADDR) &
+ HGC_ITCT_ECC_ADDR_BAD_MSK) >>
+ HGC_ITCT_ECC_ADDR_BAD_OFF;
+
+ panic("%s: Fatal TCT RAM ECC interrupt @ 0x%08x\n",
+ dev_name(dev), addr);
+ }
+
+ if (ecc_int & SAS_ECC_INTR_ITCT_ECC1B_MSK) {
+ u32 ecc_err = hisi_sas_read32(hisi_hba, HGC_ECC_ERR);
+
+ panic("%s: Fatal ITCT 1b ECC interrupt (0x%x)\n",
+ dev_name(dev), ecc_err);
+ }
+
+ hisi_sas_write32(hisi_hba, SAS_ECC_INTR, ecc_int | 0x3f);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fatal_axi_int_v1_hw(int irq, void *p)
+{
+ struct hisi_hba *hisi_hba = p;
+ struct device *dev = &hisi_hba->pdev->dev;
+ u32 axi_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC2);
+ u32 axi_info = hisi_sas_read32(hisi_hba, HGC_AXI_FIFO_ERR_INFO);
+
+ if (axi_int & ENT_INT_SRC2_DQ_CFG_ERR_MSK)
+ panic("%s: Fatal DQ_CFG_ERR interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_CQ_CFG_ERR_MSK)
+ panic("%s: Fatal CQ_CFG_ERR interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_AXI_WRONG_INT_MSK)
+ panic("%s: Fatal AXI_WRONG_INT interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ if (axi_int & ENT_INT_SRC2_AXI_OVERLF_INT_MSK)
+ panic("%s: Fatal AXI_OVERLF_INT incorrect interrupt (0x%x)\n",
+ dev_name(dev), axi_info);
+
+ hisi_sas_write32(hisi_hba, ENT_INT_SRC2, axi_int | 0x30000000);
+
+ return IRQ_HANDLED;
+}
+
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Bcast"},
{"Phy Up"},
@@ -1580,12 +1667,22 @@ static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
};
static const char cq_int_name[32] = "cq";
+static const char fatal_int_name[HISI_SAS_FATAL_INT_NR][32] = {
+ "fatal ecc",
+ "fatal axi"
+};
+
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_bcast_v1_hw,
int_phyup_v1_hw,
int_abnormal_v1_hw
};
+static irq_handler_t fatal_interrupts[HISI_SAS_MAX_QUEUES] = {
+ fatal_ecc_int_v1_hw,
+ fatal_axi_int_v1_hw
+};
+
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = &hisi_hba->pdev->dev;
@@ -1646,6 +1743,28 @@ static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
}
}
+ idx = (hisi_hba->n_phy * HISI_SAS_PHY_INT_NR) + hisi_hba->queue_count;
+ for (i = 0; i < HISI_SAS_FATAL_INT_NR; i++, idx++) {
+ irq = irq_of_parse_and_map(np, idx);
+ if (!irq) {
+ dev_err(dev, "irq init: could not map fatal interrupt %d\n",
+ idx);
+ return -ENOENT;
+ }
+ (void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
+ HISI_SAS_NAME_LEN,
+ "%s %s:%d", dev_name(dev), fatal_int_name[i], i);
+ rc = devm_request_irq(dev, irq, fatal_interrupts[i], 0,
+ &int_names[idx * HISI_SAS_NAME_LEN],
+ hisi_hba);
+ if (rc) {
+ dev_err(dev,
+ "irq init: could not request fatal interrupt %d, rc=%d\n",
+ irq, rc);
+ return -ENOENT;
+ }
+ }
+
return 0;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver
2015-11-16 13:05 ` John Garry
@ 2015-11-16 13:06 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add maintainer for HiSilicon SAS driver.
Signed-off-by: John Garry <john.garry@huawei.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..c7081bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5035,6 +5035,13 @@ F: include/uapi/linux/if_hippi.h
F: net/802/hippi.c
F: drivers/net/hippi/
+HISILICON SAS Controller
+M: John Garry <john.garry@huawei.com>
+W: http://www.hisilicon.com
+S: Supported
+F: drivers/scsi/hisi_sas/
+F: Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+
HOST AP DRIVER
M: Jouni Malinen <j@w1.fi>
L: hostap@shmoo.com (subscribers-only)
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver
@ 2015-11-16 13:06 ` John Garry
0 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-16 13:06 UTC (permalink / raw)
To: JBottomley, robh+dt, pawel.moll, mark.rutland, ijc+devicetree,
galak, arnd
Cc: linux-scsi, linux-kernel, devicetree, linuxarm, john.garry2,
hare, xuwei5, zhangfei.gao, john.garry
Add maintainer for HiSilicon SAS driver.
Signed-off-by: John Garry <john.garry@huawei.com>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..c7081bd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5035,6 +5035,13 @@ F: include/uapi/linux/if_hippi.h
F: net/802/hippi.c
F: drivers/net/hippi/
+HISILICON SAS Controller
+M: John Garry <john.garry@huawei.com>
+W: http://www.hisilicon.com
+S: Supported
+F: drivers/scsi/hisi_sas/
+F: Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+
HOST AP DRIVER
M: Jouni Malinen <j@w1.fi>
L: hostap@shmoo.com (subscribers-only)
--
1.9.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* Re: [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS
2015-11-16 13:05 ` John Garry
(?)
@ 2015-11-16 13:56 ` Rob Herring
-1 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2015-11-16 13:56 UTC (permalink / raw)
To: John Garry
Cc: JBottomley, pawel.moll, mark.rutland, ijc+devicetree, galak,
arnd, linux-scsi, linux-kernel, devicetree, linuxarm,
john.garry2, hare, xuwei5, zhangfei.gao
On Mon, Nov 16, 2015 at 09:05:48PM +0800, John Garry wrote:
> Add devicetree bindings for HiSilicon SAS driver.
>
> Signed-off-by: John Garry <john.garry@huawei.com>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
> ---
> .../devicetree/bindings/scsi/hisilicon-sas.txt | 69 ++++++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
>
> diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
> new file mode 100644
> index 0000000..f67e761
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
> @@ -0,0 +1,69 @@
> +* HiSilicon SAS controller
> +
> +The HiSilicon SAS controller supports SAS/SATA.
> +
> +Main node required properties:
> + - compatible : value should be as follows:
> + (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
> + - sas-addr : array of 8 bytes for host SAS address
> + - reg : Address and length of the SAS register
> + - hisilicon,sas-syscon: phandle of syscon used for sas control
> + - ctrl-reset-reg : offset to controller reset register in ctrl reg
> + - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
> + - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
> + - queue-count : number of delivery and completion queues in the controller
> + - phy-count : number of phys accessible by the controller
> + - interrupts : Interrupts for phys, completion queues, and fatal
> + sources; the interrupts are ordered in 3 groups, as follows:
> + - Phy interrupts
> + - Completion queue interrupts
> + - Fatal interrupts
> + Phy interrupts : Each phy has 3 interrupt sources:
> + - broadcast
> + - phyup
> + - abnormal
> + The phy interrupts are ordered into groups of 3 per phy
> + (broadcast, phyup, and abnormal) in increasing order.
> + Completion queue interrupts : each completion queue has 1
> + interrupt source.
> + The interrupts are ordered in increasing order.
> + Fatal interrupts : the fatal interrupts are ordered as follows:
> + - ECC
> + - AXI bus
> +
> +Example:
> + sas0: sas@c1000000 {
> + compatible = "hisilicon,hip05-sas-v1";
> + sas-addr = [50 01 88 20 16 00 00 0a];
> + reg = <0x0 0xc1000000 0x0 0x10000>;
> + hisilicon,sas-syscon = <&pcie_sas>;
> + ctrl-reset-reg = <0xa60>;
> + ctrl-reset-sts-reg = <0x5a30>;
> + ctrl-clock-ena-reg = <0x338>;
> + queue-count = <32>;
> + phy-count = <8>;
> + dma-coherent;
> + interrupt-parent = <&mbigen_dsa>;
> + interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */
> + <269 4>,<273 4>,<274 4>,/* phy1 */
> + <279 4>,<283 4>,<284 4>,/* phy2 */
> + <289 4>,<293 4>,<294 4>,/* phy3 */
> + <299 4>,<303 4>,<304 4>,/* phy4 */
> + <309 4>,<313 4>,<314 4>,/* phy5 */
> + <319 4>,<323 4>,<324 4>,/* phy6 */
> + <329 4>,<333 4>,<334 4>,/* phy7 */
> + <336 1>,<337 1>,<338 1>,/* cq0-2 */
> + <339 1>,<340 1>,<341 1>,/* cq3-5 */
> + <342 1>,<343 1>,<344 1>,/* cq6-8 */
> + <345 1>,<346 1>,<347 1>,/* cq9-11 */
> + <348 1>,<349 1>,<350 1>,/* cq12-14 */
> + <351 1>,<352 1>,<353 1>,/* cq15-17 */
> + <354 1>,<355 1>,<356 1>,/* cq18-20 */
> + <357 1>,<358 1>,<359 1>,/* cq21-23 */
> + <360 1>,<361 1>,<362 1>,/* cq24-26 */
> + <363 1>,<364 1>,<365 1>,/* cq27-29 */
> + <366 1>,<367 1>/* cq30-31 */
> + <376 4>,/* fatal ecc */
> + <381 4>;/* fatal axi */
> + status = "disabled";
> + };
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver
2015-11-16 13:05 ` John Garry
@ 2015-11-16 17:35 ` kbuild test robot
-1 siblings, 0 replies; 72+ messages in thread
From: kbuild test robot @ 2015-11-16 17:35 UTC (permalink / raw)
To: John Garry
Cc: kbuild-all, JBottomley, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, arnd, linux-scsi, linux-kernel,
devicetree, linuxarm, john.garry2, hare, xuwei5, zhangfei.gao,
john.garry
[-- Attachment #1: Type: text/plain, Size: 17337 bytes --]
Hi John,
[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc1 next-20151116]
url: https://github.com/0day-ci/linux/commits/John-Garry/HiSilicon-SAS-driver/20151116-215304
base: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: i386-randconfig-s0-11162304 (attached as .config)
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All error/warnings (new ones prefixed by >>):
warning: (SCSI_HISI_SAS && TCM_IBLOCK) selects BLK_DEV_INTEGRITY which has unmet direct dependencies (BLOCK)
warning: (SCSI_HISI_SAS) selects SCSI_SAS_LIBSAS which has unmet direct dependencies (SCSI)
block/bio-integrity.c: In function 'bio_integrity_alloc':
>> block/bio-integrity.c:50:26: error: dereferencing pointer to incomplete type 'struct bio'
struct bio_set *bs = bio->bi_pool;
^
>> block/bio-integrity.c:51:22: error: 'BIO_POOL_NONE' undeclared (first use in this function)
unsigned long idx = BIO_POOL_NONE;
^
block/bio-integrity.c:51:22: note: each undeclared identifier is reported only once for each function it appears in
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:54:16: error: dereferencing pointer to incomplete type 'struct bio_set'
if (!bs || !bs->bio_integrity_pool) {
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
>> block/bio-integrity.c:54:2: note: in expansion of macro 'if'
if (!bs || !bs->bio_integrity_pool) {
^
>> block/bio-integrity.c:55:24: error: invalid application of 'sizeof' to incomplete type 'struct bio_integrity_payload'
bip = kmalloc(sizeof(struct bio_integrity_payload) +
^
In file included from arch/x86/include/asm/string.h:2:0,
from include/linux/string.h:17,
from include/linux/dynamic_debug.h:111,
from include/linux/printk.h:277,
from include/linux/kernel.h:13,
from include/linux/sched.h:17,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:66:24: error: dereferencing pointer to incomplete type 'struct bio_integrity_payload'
memset(bip, 0, sizeof(*bip));
^
arch/x86/include/asm/string_32.h:325:52: note: in definition of macro 'memset'
#define memset(s, c, count) __builtin_memset(s, c, count)
^
>> block/bio-integrity.c:69:18: error: implicit declaration of function 'bvec_alloc' [-Werror=implicit-function-declaration]
bip->bip_vec = bvec_alloc(gfp_mask, nr_vecs, &idx,
^
>> block/bio-integrity.c:73:23: error: implicit declaration of function 'bvec_nr_vecs' [-Werror=implicit-function-declaration]
bip->bip_max_vcnt = bvec_nr_vecs(idx);
^
block/bio-integrity.c: In function 'bio_integrity_free':
>> block/bio-integrity.c:100:38: error: implicit declaration of function 'bio_integrity' [-Werror=implicit-function-declaration]
struct bio_integrity_payload *bip = bio_integrity(bio);
^
>> block/bio-integrity.c:100:38: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:103:23: error: 'BIP_BLOCK_INTEGRITY' undeclared (first use in this function)
if (bip->bip_flags & BIP_BLOCK_INTEGRITY)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:103:2: note: in expansion of macro 'if'
if (bip->bip_flags & BIP_BLOCK_INTEGRITY)
^
block/bio-integrity.c:108:24: error: 'BIO_POOL_NONE' undeclared (first use in this function)
if (bip->bip_slab != BIO_POOL_NONE)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:108:3: note: in expansion of macro 'if'
if (bip->bip_slab != BIO_POOL_NONE)
^
>> block/bio-integrity.c:109:4: error: implicit declaration of function 'bvec_free' [-Werror=implicit-function-declaration]
bvec_free(bs->bvec_integrity_pool, bip->bip_vec,
^
block/bio-integrity.c: In function 'bio_integrity_add_page':
block/bio-integrity.c:133:38: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
struct bio_integrity_payload *bip = bio_integrity(bio);
^
block/bio-integrity.c: In function 'bio_integrity_enabled':
>> block/bio-integrity.c:163:29: error: implicit declaration of function 'bdev_get_integrity' [-Werror=implicit-function-declaration]
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
^
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:165:7: error: implicit declaration of function 'bio_is_rw' [-Werror=implicit-function-declaration]
if (!bio_is_rw(bio))
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:165:2: note: in expansion of macro 'if'
if (!bio_is_rw(bio))
^
>> block/bio-integrity.c:175:6: error: implicit declaration of function 'bio_data_dir' [-Werror=implicit-function-declaration]
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:175:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
>> block/bio-integrity.c:175:37: error: dereferencing pointer to incomplete type 'struct blk_integrity'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:175:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
>> block/bio-integrity.c:176:19: error: 'BLK_INTEGRITY_VERIFY' undeclared (first use in this function)
(bi->flags & BLK_INTEGRITY_VERIFY))
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:175:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
>> block/bio-integrity.c:180:19: error: 'BLK_INTEGRITY_GENERATE' undeclared (first use in this function)
(bi->flags & BLK_INTEGRITY_GENERATE))
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:179:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == WRITE && bi->generate_fn != NULL &&
^
block/bio-integrity.c: At top level:
>> block/bio-integrity.c:198:10: warning: 'struct blk_integrity' declared inside parameter list
unsigned int sectors)
^
>> block/bio-integrity.c:198:10: warning: its scope is only this definition or declaration, which is probably not what you want
In file included from include/linux/kernel.h:11:0,
from include/linux/sched.h:17,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
block/bio-integrity.c: In function 'bio_integrity_intervals':
block/bio-integrity.c:200:29: error: dereferencing pointer to incomplete type 'struct blk_integrity'
return sectors >> (ilog2(bi->interval) - 9);
^
include/linux/log2.h:87:23: note: in definition of macro 'ilog2'
__builtin_constant_p(n) ? ( \
^
block/bio-integrity.c: At top level:
block/bio-integrity.c:204:13: warning: 'struct blk_integrity' declared inside parameter list
unsigned int sectors)
^
block/bio-integrity.c: In function 'bio_integrity_bytes':
--
In file included from block/blk.h:5:0,
from block/blk-integrity.c:31:
>> include/linux/blk-mq.h:61:18: error: field 'kobj' has incomplete type
struct kobject kobj;
^
>> include/linux/blk-mq.h:117:2: error: unknown type name 'softirq_done_fn'
softirq_done_fn *complete;
^
include/linux/blk-mq.h: In function 'blk_mq_rq_from_pdu':
>> include/linux/blk-mq.h:241:22: error: invalid application of 'sizeof' to incomplete type 'struct request'
return pdu - sizeof(struct request);
^
include/linux/blk-mq.h: In function 'blk_mq_rq_to_pdu':
>> include/linux/blk-mq.h:245:2: error: invalid use of undefined type 'struct request'
return rq + 1;
^
In file included from block/blk.h:6:0,
from block/blk-integrity.c:31:
block/blk-mq.h: At top level:
>> block/blk-mq.h:25:18: error: field 'kobj' has incomplete type
struct kobject kobj;
^
In file included from include/asm-generic/percpu.h:6:0,
from arch/x86/include/asm/percpu.h:551,
from arch/x86/include/asm/preempt.h:5,
from include/linux/preempt.h:64,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:35,
from include/linux/time.h:5,
from include/uapi/linux/timex.h:56,
from include/linux/timex.h:56,
from include/linux/sched.h:19,
from include/linux/blkdev.h:4,
from block/blk-integrity.c:23:
block/blk-mq.h: In function '__blk_mq_get_ctx':
>> block/blk-mq.h:79:22: error: dereferencing pointer to incomplete type 'struct request_queue'
return per_cpu_ptr(q->queue_ctx, cpu);
^
include/linux/percpu-defs.h:206:47: note: in definition of macro '__verify_pcpu_ptr'
const void __percpu *__vpp_verify = (typeof((ptr) + 0))NULL; \
^
include/linux/percpu-defs.h:250:47: note: in expansion of macro 'VERIFY_PERCPU_PTR'
#define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); VERIFY_PERCPU_PTR(ptr); })
^
>> block/blk-mq.h:79:9: note: in expansion of macro 'per_cpu_ptr'
return per_cpu_ptr(q->queue_ctx, cpu);
^
In file included from block/blk-integrity.c:31:0:
block/blk.h: In function '__blk_get_queue':
>> block/blk.h:54:2: error: implicit declaration of function 'kobject_get' [-Werror=implicit-function-declaration]
kobject_get(&q->kobj);
^
block/blk.h: At top level:
>> block/blk.h:62:3: warning: 'struct request_list' declared inside parameter list
gfp_t gfp_mask);
^
>> block/blk.h:62:3: warning: its scope is only this definition or declaration, which is probably not what you want
block/blk.h:63:25: warning: 'struct request_list' declared inside parameter list
void blk_exit_rl(struct request_list *rl);
^
block/blk.h: In function 'blk_mark_rq_complete':
>> block/blk.h:108:48: error: dereferencing pointer to incomplete type 'struct request'
return test_and_set_bit(REQ_ATOM_COMPLETE, &rq->atomic_flags);
^
block/blk.h: In function '__elv_next_request':
>> block/blk.h:130:9: error: implicit declaration of function 'list_entry_rq' [-Werror=implicit-function-declaration]
rq = list_entry_rq(q->queue_head.next);
^
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/blk-integrity.c:23:
>> block/blk.h:150:6: error: implicit declaration of function 'queue_flush_queueable' [-Werror=implicit-function-declaration]
!queue_flush_queueable(q)) {
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
>> block/blk.h:149:3: note: in expansion of macro 'if'
if (fq->flush_pending_idx != fq->flush_running_idx &&
^
>> block/blk.h:154:16: error: implicit declaration of function 'blk_queue_bypass' [-Werror=implicit-function-declaration]
if (unlikely(blk_queue_bypass(q)) ||
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/blk.h:154:3: note: in expansion of macro 'if'
if (unlikely(blk_queue_bypass(q)) ||
^
>> block/blk.h:154:7: note: in expansion of macro 'unlikely'
if (unlikely(blk_queue_bypass(q)) ||
^
block/blk.h: In function 'elv_activate_rq':
>> block/blk.h:164:7: error: dereferencing pointer to incomplete type 'struct elevator_queue'
if (e->type->ops.elevator_activate_req_fn)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/blk.h:164:2: note: in expansion of macro 'if'
if (e->type->ops.elevator_activate_req_fn)
^
block/blk.h: In function 'elv_deactivate_rq':
block/blk.h:172:7: error: dereferencing pointer to incomplete type 'struct elevator_queue'
if (e->type->ops.elevator_deactivate_req_fn)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/blk.h:172:2: note: in expansion of macro 'if'
if (e->type->ops.elevator_deactivate_req_fn)
^
In file included from block/blk-integrity.c:31:0:
block/blk.h: In function 'blk_do_io_stat':
>> block/blk.h:237:20: error: 'REQ_TYPE_FS' undeclared (first use in this function)
(rq->cmd_type == REQ_TYPE_FS);
^
block/blk.h:237:20: note: each undeclared identifier is reported only once for each function it appears in
block/blk-integrity.c: In function 'blk_rq_count_integrity_sg':
>> block/blk-integrity.c:50:19: error: storage size of 'iter' isn't known
struct bvec_iter iter;
^
>> block/blk-integrity.c:53:2: error: implicit declaration of function 'bio_for_each_integrity_vec' [-Werror=implicit-function-declaration]
bio_for_each_integrity_vec(iv, bio, iter) {
^
..
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 24693 bytes --]
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver
@ 2015-11-16 17:35 ` kbuild test robot
0 siblings, 0 replies; 72+ messages in thread
From: kbuild test robot @ 2015-11-16 17:35 UTC (permalink / raw)
Cc: kbuild-all, JBottomley, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, arnd, linux-scsi, linux-kernel,
devicetree, linuxarm, john.garry2, hare, xuwei5, zhangfei.gao,
john.garry
[-- Attachment #1: Type: text/plain, Size: 17337 bytes --]
Hi John,
[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc1 next-20151116]
url: https://github.com/0day-ci/linux/commits/John-Garry/HiSilicon-SAS-driver/20151116-215304
base: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: i386-randconfig-s0-11162304 (attached as .config)
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All error/warnings (new ones prefixed by >>):
warning: (SCSI_HISI_SAS && TCM_IBLOCK) selects BLK_DEV_INTEGRITY which has unmet direct dependencies (BLOCK)
warning: (SCSI_HISI_SAS) selects SCSI_SAS_LIBSAS which has unmet direct dependencies (SCSI)
block/bio-integrity.c: In function 'bio_integrity_alloc':
>> block/bio-integrity.c:50:26: error: dereferencing pointer to incomplete type 'struct bio'
struct bio_set *bs = bio->bi_pool;
^
>> block/bio-integrity.c:51:22: error: 'BIO_POOL_NONE' undeclared (first use in this function)
unsigned long idx = BIO_POOL_NONE;
^
block/bio-integrity.c:51:22: note: each undeclared identifier is reported only once for each function it appears in
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:54:16: error: dereferencing pointer to incomplete type 'struct bio_set'
if (!bs || !bs->bio_integrity_pool) {
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
>> block/bio-integrity.c:54:2: note: in expansion of macro 'if'
if (!bs || !bs->bio_integrity_pool) {
^
>> block/bio-integrity.c:55:24: error: invalid application of 'sizeof' to incomplete type 'struct bio_integrity_payload'
bip = kmalloc(sizeof(struct bio_integrity_payload) +
^
In file included from arch/x86/include/asm/string.h:2:0,
from include/linux/string.h:17,
from include/linux/dynamic_debug.h:111,
from include/linux/printk.h:277,
from include/linux/kernel.h:13,
from include/linux/sched.h:17,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:66:24: error: dereferencing pointer to incomplete type 'struct bio_integrity_payload'
memset(bip, 0, sizeof(*bip));
^
arch/x86/include/asm/string_32.h:325:52: note: in definition of macro 'memset'
#define memset(s, c, count) __builtin_memset(s, c, count)
^
>> block/bio-integrity.c:69:18: error: implicit declaration of function 'bvec_alloc' [-Werror=implicit-function-declaration]
bip->bip_vec = bvec_alloc(gfp_mask, nr_vecs, &idx,
^
>> block/bio-integrity.c:73:23: error: implicit declaration of function 'bvec_nr_vecs' [-Werror=implicit-function-declaration]
bip->bip_max_vcnt = bvec_nr_vecs(idx);
^
block/bio-integrity.c: In function 'bio_integrity_free':
>> block/bio-integrity.c:100:38: error: implicit declaration of function 'bio_integrity' [-Werror=implicit-function-declaration]
struct bio_integrity_payload *bip = bio_integrity(bio);
^
>> block/bio-integrity.c:100:38: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:103:23: error: 'BIP_BLOCK_INTEGRITY' undeclared (first use in this function)
if (bip->bip_flags & BIP_BLOCK_INTEGRITY)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:103:2: note: in expansion of macro 'if'
if (bip->bip_flags & BIP_BLOCK_INTEGRITY)
^
block/bio-integrity.c:108:24: error: 'BIO_POOL_NONE' undeclared (first use in this function)
if (bip->bip_slab != BIO_POOL_NONE)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:108:3: note: in expansion of macro 'if'
if (bip->bip_slab != BIO_POOL_NONE)
^
>> block/bio-integrity.c:109:4: error: implicit declaration of function 'bvec_free' [-Werror=implicit-function-declaration]
bvec_free(bs->bvec_integrity_pool, bip->bip_vec,
^
block/bio-integrity.c: In function 'bio_integrity_add_page':
block/bio-integrity.c:133:38: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
struct bio_integrity_payload *bip = bio_integrity(bio);
^
block/bio-integrity.c: In function 'bio_integrity_enabled':
>> block/bio-integrity.c:163:29: error: implicit declaration of function 'bdev_get_integrity' [-Werror=implicit-function-declaration]
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
^
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
>> block/bio-integrity.c:165:7: error: implicit declaration of function 'bio_is_rw' [-Werror=implicit-function-declaration]
if (!bio_is_rw(bio))
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:165:2: note: in expansion of macro 'if'
if (!bio_is_rw(bio))
^
>> block/bio-integrity.c:175:6: error: implicit declaration of function 'bio_data_dir' [-Werror=implicit-function-declaration]
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:175:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
>> block/bio-integrity.c:175:37: error: dereferencing pointer to incomplete type 'struct blk_integrity'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:175:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
>> block/bio-integrity.c:176:19: error: 'BLK_INTEGRITY_VERIFY' undeclared (first use in this function)
(bi->flags & BLK_INTEGRITY_VERIFY))
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:175:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
^
>> block/bio-integrity.c:180:19: error: 'BLK_INTEGRITY_GENERATE' undeclared (first use in this function)
(bi->flags & BLK_INTEGRITY_GENERATE))
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/bio-integrity.c:179:2: note: in expansion of macro 'if'
if (bio_data_dir(bio) == WRITE && bi->generate_fn != NULL &&
^
block/bio-integrity.c: At top level:
>> block/bio-integrity.c:198:10: warning: 'struct blk_integrity' declared inside parameter list
unsigned int sectors)
^
>> block/bio-integrity.c:198:10: warning: its scope is only this definition or declaration, which is probably not what you want
In file included from include/linux/kernel.h:11:0,
from include/linux/sched.h:17,
from include/linux/blkdev.h:4,
from block/bio-integrity.c:23:
block/bio-integrity.c: In function 'bio_integrity_intervals':
block/bio-integrity.c:200:29: error: dereferencing pointer to incomplete type 'struct blk_integrity'
return sectors >> (ilog2(bi->interval) - 9);
^
include/linux/log2.h:87:23: note: in definition of macro 'ilog2'
__builtin_constant_p(n) ? ( \
^
block/bio-integrity.c: At top level:
block/bio-integrity.c:204:13: warning: 'struct blk_integrity' declared inside parameter list
unsigned int sectors)
^
block/bio-integrity.c: In function 'bio_integrity_bytes':
--
In file included from block/blk.h:5:0,
from block/blk-integrity.c:31:
>> include/linux/blk-mq.h:61:18: error: field 'kobj' has incomplete type
struct kobject kobj;
^
>> include/linux/blk-mq.h:117:2: error: unknown type name 'softirq_done_fn'
softirq_done_fn *complete;
^
include/linux/blk-mq.h: In function 'blk_mq_rq_from_pdu':
>> include/linux/blk-mq.h:241:22: error: invalid application of 'sizeof' to incomplete type 'struct request'
return pdu - sizeof(struct request);
^
include/linux/blk-mq.h: In function 'blk_mq_rq_to_pdu':
>> include/linux/blk-mq.h:245:2: error: invalid use of undefined type 'struct request'
return rq + 1;
^
In file included from block/blk.h:6:0,
from block/blk-integrity.c:31:
block/blk-mq.h: At top level:
>> block/blk-mq.h:25:18: error: field 'kobj' has incomplete type
struct kobject kobj;
^
In file included from include/asm-generic/percpu.h:6:0,
from arch/x86/include/asm/percpu.h:551,
from arch/x86/include/asm/preempt.h:5,
from include/linux/preempt.h:64,
from include/linux/spinlock.h:50,
from include/linux/seqlock.h:35,
from include/linux/time.h:5,
from include/uapi/linux/timex.h:56,
from include/linux/timex.h:56,
from include/linux/sched.h:19,
from include/linux/blkdev.h:4,
from block/blk-integrity.c:23:
block/blk-mq.h: In function '__blk_mq_get_ctx':
>> block/blk-mq.h:79:22: error: dereferencing pointer to incomplete type 'struct request_queue'
return per_cpu_ptr(q->queue_ctx, cpu);
^
include/linux/percpu-defs.h:206:47: note: in definition of macro '__verify_pcpu_ptr'
const void __percpu *__vpp_verify = (typeof((ptr) + 0))NULL; \
^
include/linux/percpu-defs.h:250:47: note: in expansion of macro 'VERIFY_PERCPU_PTR'
#define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); VERIFY_PERCPU_PTR(ptr); })
^
>> block/blk-mq.h:79:9: note: in expansion of macro 'per_cpu_ptr'
return per_cpu_ptr(q->queue_ctx, cpu);
^
In file included from block/blk-integrity.c:31:0:
block/blk.h: In function '__blk_get_queue':
>> block/blk.h:54:2: error: implicit declaration of function 'kobject_get' [-Werror=implicit-function-declaration]
kobject_get(&q->kobj);
^
block/blk.h: At top level:
>> block/blk.h:62:3: warning: 'struct request_list' declared inside parameter list
gfp_t gfp_mask);
^
>> block/blk.h:62:3: warning: its scope is only this definition or declaration, which is probably not what you want
block/blk.h:63:25: warning: 'struct request_list' declared inside parameter list
void blk_exit_rl(struct request_list *rl);
^
block/blk.h: In function 'blk_mark_rq_complete':
>> block/blk.h:108:48: error: dereferencing pointer to incomplete type 'struct request'
return test_and_set_bit(REQ_ATOM_COMPLETE, &rq->atomic_flags);
^
block/blk.h: In function '__elv_next_request':
>> block/blk.h:130:9: error: implicit declaration of function 'list_entry_rq' [-Werror=implicit-function-declaration]
rq = list_entry_rq(q->queue_head.next);
^
In file included from include/uapi/linux/stddef.h:1:0,
from include/linux/stddef.h:4,
from include/uapi/linux/posix_types.h:4,
from include/uapi/linux/types.h:13,
from include/linux/types.h:5,
from include/uapi/linux/capability.h:16,
from include/linux/capability.h:15,
from include/linux/sched.h:15,
from include/linux/blkdev.h:4,
from block/blk-integrity.c:23:
>> block/blk.h:150:6: error: implicit declaration of function 'queue_flush_queueable' [-Werror=implicit-function-declaration]
!queue_flush_queueable(q)) {
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
>> block/blk.h:149:3: note: in expansion of macro 'if'
if (fq->flush_pending_idx != fq->flush_running_idx &&
^
>> block/blk.h:154:16: error: implicit declaration of function 'blk_queue_bypass' [-Werror=implicit-function-declaration]
if (unlikely(blk_queue_bypass(q)) ||
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/blk.h:154:3: note: in expansion of macro 'if'
if (unlikely(blk_queue_bypass(q)) ||
^
>> block/blk.h:154:7: note: in expansion of macro 'unlikely'
if (unlikely(blk_queue_bypass(q)) ||
^
block/blk.h: In function 'elv_activate_rq':
>> block/blk.h:164:7: error: dereferencing pointer to incomplete type 'struct elevator_queue'
if (e->type->ops.elevator_activate_req_fn)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/blk.h:164:2: note: in expansion of macro 'if'
if (e->type->ops.elevator_activate_req_fn)
^
block/blk.h: In function 'elv_deactivate_rq':
block/blk.h:172:7: error: dereferencing pointer to incomplete type 'struct elevator_queue'
if (e->type->ops.elevator_deactivate_req_fn)
^
include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
if (__builtin_constant_p((cond)) ? !!(cond) : \
^
block/blk.h:172:2: note: in expansion of macro 'if'
if (e->type->ops.elevator_deactivate_req_fn)
^
In file included from block/blk-integrity.c:31:0:
block/blk.h: In function 'blk_do_io_stat':
>> block/blk.h:237:20: error: 'REQ_TYPE_FS' undeclared (first use in this function)
(rq->cmd_type == REQ_TYPE_FS);
^
block/blk.h:237:20: note: each undeclared identifier is reported only once for each function it appears in
block/blk-integrity.c: In function 'blk_rq_count_integrity_sg':
>> block/blk-integrity.c:50:19: error: storage size of 'iter' isn't known
struct bvec_iter iter;
^
>> block/blk-integrity.c:53:2: error: implicit declaration of function 'bio_for_each_integrity_vec' [-Werror=implicit-function-declaration]
bio_for_each_integrity_vec(iv, bio, iter) {
^
..
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 24693 bytes --]
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v4 05/32] scsi: hisi_sas: scan device tree
2015-11-16 13:05 ` John Garry
@ 2015-11-16 21:10 ` kbuild test robot
-1 siblings, 0 replies; 72+ messages in thread
From: kbuild test robot @ 2015-11-16 21:10 UTC (permalink / raw)
To: John Garry
Cc: kbuild-all, JBottomley, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, arnd, linux-scsi, linux-kernel,
devicetree, linuxarm, john.garry2, hare, xuwei5, zhangfei.gao,
john.garry
[-- Attachment #1: Type: text/plain, Size: 654 bytes --]
Hi John,
[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc1 next-20151116]
url: https://github.com/0day-ci/linux/commits/John-Garry/HiSilicon-SAS-driver/20151116-215304
base: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: i386-allmodconfig (attached as .config)
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
>> ERROR: "of_irq_count" undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 51495 bytes --]
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v4 05/32] scsi: hisi_sas: scan device tree
@ 2015-11-16 21:10 ` kbuild test robot
0 siblings, 0 replies; 72+ messages in thread
From: kbuild test robot @ 2015-11-16 21:10 UTC (permalink / raw)
Cc: kbuild-all, JBottomley, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, arnd, linux-scsi, linux-kernel,
devicetree, linuxarm, john.garry2, hare, xuwei5, zhangfei.gao,
john.garry
[-- Attachment #1: Type: text/plain, Size: 654 bytes --]
Hi John,
[auto build test ERROR on scsi/for-next]
[also build test ERROR on v4.4-rc1 next-20151116]
url: https://github.com/0day-ci/linux/commits/John-Garry/HiSilicon-SAS-driver/20151116-215304
base: https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
config: i386-allmodconfig (attached as .config)
reproduce:
# save the attached .config to linux build tree
make ARCH=i386
All errors (new ones prefixed by >>):
>> ERROR: "of_irq_count" undefined!
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 51495 bytes --]
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver
2015-11-16 17:35 ` kbuild test robot
(?)
@ 2015-11-17 16:24 ` John Garry
-1 siblings, 0 replies; 72+ messages in thread
From: John Garry @ 2015-11-17 16:24 UTC (permalink / raw)
To: kbuild test robot
Cc: kbuild-all, JBottomley, robh+dt, pawel.moll, mark.rutland,
ijc+devicetree, galak, arnd, linux-scsi, linux-kernel,
devicetree, Linuxarm, john.garry2, hare, xuwei (O),
zhangfei.gao
I'll follow up with a fix in patchset v5. However kernel linking seems
broken for this config without my patches.
arch/x86/built-in.o: In function `hv_machine_crash_shutdown':
mshyperv.c:(.text+0xa1ec4): undefined reference to
`native_machine_crash_shutdown'
John
On 16/11/2015 17:35, kbuild test robot wrote:
> Hi John,
>
> [auto build test ERROR on scsi/for-next]
> [also build test ERROR on v4.4-rc1 next-20151116]
>
> url:https://github.com/0day-ci/linux/commits/John-Garry/HiSilicon-SAS-driver/20151116-215304
> base:https://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git for-next
> config: i386-randconfig-s0-11162304 (attached as .config)
> reproduce:
> # save the attached .config to linux build tree
> make ARCH=i386
>
> All error/warnings (new ones prefixed by >>):
>
> warning: (SCSI_HISI_SAS && TCM_IBLOCK) selects BLK_DEV_INTEGRITY which has unmet direct dependencies (BLOCK)
> warning: (SCSI_HISI_SAS) selects SCSI_SAS_LIBSAS which has unmet direct dependencies (SCSI)
> block/bio-integrity.c: In function 'bio_integrity_alloc':
>>> block/bio-integrity.c:50:26: error: dereferencing pointer to incomplete type 'struct bio'
> struct bio_set *bs = bio->bi_pool;
> ^
>>> block/bio-integrity.c:51:22: error: 'BIO_POOL_NONE' undeclared (first use in this function)
> unsigned long idx = BIO_POOL_NONE;
> ^
> block/bio-integrity.c:51:22: note: each undeclared identifier is reported only once for each function it appears in
> In file included from include/uapi/linux/stddef.h:1:0,
> from include/linux/stddef.h:4,
> from include/uapi/linux/posix_types.h:4,
> from include/uapi/linux/types.h:13,
> from include/linux/types.h:5,
> from include/uapi/linux/capability.h:16,
> from include/linux/capability.h:15,
> from include/linux/sched.h:15,
> from include/linux/blkdev.h:4,
> from block/bio-integrity.c:23:
>>> block/bio-integrity.c:54:16: error: dereferencing pointer to incomplete type 'struct bio_set'
> if (!bs || !bs->bio_integrity_pool) {
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
>>> block/bio-integrity.c:54:2: note: in expansion of macro 'if'
> if (!bs || !bs->bio_integrity_pool) {
> ^
>>> block/bio-integrity.c:55:24: error: invalid application of 'sizeof' to incomplete type 'struct bio_integrity_payload'
> bip = kmalloc(sizeof(struct bio_integrity_payload) +
> ^
> In file included from arch/x86/include/asm/string.h:2:0,
> from include/linux/string.h:17,
> from include/linux/dynamic_debug.h:111,
> from include/linux/printk.h:277,
> from include/linux/kernel.h:13,
> from include/linux/sched.h:17,
> from include/linux/blkdev.h:4,
> from block/bio-integrity.c:23:
>>> block/bio-integrity.c:66:24: error: dereferencing pointer to incomplete type 'struct bio_integrity_payload'
> memset(bip, 0, sizeof(*bip));
> ^
> arch/x86/include/asm/string_32.h:325:52: note: in definition of macro 'memset'
> #define memset(s, c, count) __builtin_memset(s, c, count)
> ^
>>> block/bio-integrity.c:69:18: error: implicit declaration of function 'bvec_alloc' [-Werror=implicit-function-declaration]
> bip->bip_vec = bvec_alloc(gfp_mask, nr_vecs, &idx,
> ^
>>> block/bio-integrity.c:73:23: error: implicit declaration of function 'bvec_nr_vecs' [-Werror=implicit-function-declaration]
> bip->bip_max_vcnt = bvec_nr_vecs(idx);
> ^
> block/bio-integrity.c: In function 'bio_integrity_free':
>>> block/bio-integrity.c:100:38: error: implicit declaration of function 'bio_integrity' [-Werror=implicit-function-declaration]
> struct bio_integrity_payload *bip = bio_integrity(bio);
> ^
>>> block/bio-integrity.c:100:38: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
> In file included from include/uapi/linux/stddef.h:1:0,
> from include/linux/stddef.h:4,
> from include/uapi/linux/posix_types.h:4,
> from include/uapi/linux/types.h:13,
> from include/linux/types.h:5,
> from include/uapi/linux/capability.h:16,
> from include/linux/capability.h:15,
> from include/linux/sched.h:15,
> from include/linux/blkdev.h:4,
> from block/bio-integrity.c:23:
>>> block/bio-integrity.c:103:23: error: 'BIP_BLOCK_INTEGRITY' undeclared (first use in this function)
> if (bip->bip_flags & BIP_BLOCK_INTEGRITY)
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:103:2: note: in expansion of macro 'if'
> if (bip->bip_flags & BIP_BLOCK_INTEGRITY)
> ^
> block/bio-integrity.c:108:24: error: 'BIO_POOL_NONE' undeclared (first use in this function)
> if (bip->bip_slab != BIO_POOL_NONE)
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:108:3: note: in expansion of macro 'if'
> if (bip->bip_slab != BIO_POOL_NONE)
> ^
>>> block/bio-integrity.c:109:4: error: implicit declaration of function 'bvec_free' [-Werror=implicit-function-declaration]
> bvec_free(bs->bvec_integrity_pool, bip->bip_vec,
> ^
> block/bio-integrity.c: In function 'bio_integrity_add_page':
> block/bio-integrity.c:133:38: warning: initialization makes pointer from integer without a cast [-Wint-conversion]
> struct bio_integrity_payload *bip = bio_integrity(bio);
> ^
> block/bio-integrity.c: In function 'bio_integrity_enabled':
>>> block/bio-integrity.c:163:29: error: implicit declaration of function 'bdev_get_integrity' [-Werror=implicit-function-declaration]
> struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
> ^
> In file included from include/uapi/linux/stddef.h:1:0,
> from include/linux/stddef.h:4,
> from include/uapi/linux/posix_types.h:4,
> from include/uapi/linux/types.h:13,
> from include/linux/types.h:5,
> from include/uapi/linux/capability.h:16,
> from include/linux/capability.h:15,
> from include/linux/sched.h:15,
> from include/linux/blkdev.h:4,
> from block/bio-integrity.c:23:
>>> block/bio-integrity.c:165:7: error: implicit declaration of function 'bio_is_rw' [-Werror=implicit-function-declaration]
> if (!bio_is_rw(bio))
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:165:2: note: in expansion of macro 'if'
> if (!bio_is_rw(bio))
> ^
>>> block/bio-integrity.c:175:6: error: implicit declaration of function 'bio_data_dir' [-Werror=implicit-function-declaration]
> if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:175:2: note: in expansion of macro 'if'
> if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
> ^
>>> block/bio-integrity.c:175:37: error: dereferencing pointer to incomplete type 'struct blk_integrity'
> if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:175:2: note: in expansion of macro 'if'
> if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
> ^
>>> block/bio-integrity.c:176:19: error: 'BLK_INTEGRITY_VERIFY' undeclared (first use in this function)
> (bi->flags & BLK_INTEGRITY_VERIFY))
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:175:2: note: in expansion of macro 'if'
> if (bio_data_dir(bio) == READ && bi->verify_fn != NULL &&
> ^
>>> block/bio-integrity.c:180:19: error: 'BLK_INTEGRITY_GENERATE' undeclared (first use in this function)
> (bi->flags & BLK_INTEGRITY_GENERATE))
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/bio-integrity.c:179:2: note: in expansion of macro 'if'
> if (bio_data_dir(bio) == WRITE && bi->generate_fn != NULL &&
> ^
> block/bio-integrity.c: At top level:
>>> block/bio-integrity.c:198:10: warning: 'struct blk_integrity' declared inside parameter list
> unsigned int sectors)
> ^
>>> block/bio-integrity.c:198:10: warning: its scope is only this definition or declaration, which is probably not what you want
> In file included from include/linux/kernel.h:11:0,
> from include/linux/sched.h:17,
> from include/linux/blkdev.h:4,
> from block/bio-integrity.c:23:
> block/bio-integrity.c: In function 'bio_integrity_intervals':
> block/bio-integrity.c:200:29: error: dereferencing pointer to incomplete type 'struct blk_integrity'
> return sectors >> (ilog2(bi->interval) - 9);
> ^
> include/linux/log2.h:87:23: note: in definition of macro 'ilog2'
> __builtin_constant_p(n) ? ( \
> ^
> block/bio-integrity.c: At top level:
> block/bio-integrity.c:204:13: warning: 'struct blk_integrity' declared inside parameter list
> unsigned int sectors)
> ^
> block/bio-integrity.c: In function 'bio_integrity_bytes':
> --
> In file included from block/blk.h:5:0,
> from block/blk-integrity.c:31:
>>> include/linux/blk-mq.h:61:18: error: field 'kobj' has incomplete type
> struct kobject kobj;
> ^
>>> include/linux/blk-mq.h:117:2: error: unknown type name 'softirq_done_fn'
> softirq_done_fn *complete;
> ^
> include/linux/blk-mq.h: In function 'blk_mq_rq_from_pdu':
>>> include/linux/blk-mq.h:241:22: error: invalid application of 'sizeof' to incomplete type 'struct request'
> return pdu - sizeof(struct request);
> ^
> include/linux/blk-mq.h: In function 'blk_mq_rq_to_pdu':
>>> include/linux/blk-mq.h:245:2: error: invalid use of undefined type 'struct request'
> return rq + 1;
> ^
> In file included from block/blk.h:6:0,
> from block/blk-integrity.c:31:
> block/blk-mq.h: At top level:
>>> block/blk-mq.h:25:18: error: field 'kobj' has incomplete type
> struct kobject kobj;
> ^
> In file included from include/asm-generic/percpu.h:6:0,
> from arch/x86/include/asm/percpu.h:551,
> from arch/x86/include/asm/preempt.h:5,
> from include/linux/preempt.h:64,
> from include/linux/spinlock.h:50,
> from include/linux/seqlock.h:35,
> from include/linux/time.h:5,
> from include/uapi/linux/timex.h:56,
> from include/linux/timex.h:56,
> from include/linux/sched.h:19,
> from include/linux/blkdev.h:4,
> from block/blk-integrity.c:23:
> block/blk-mq.h: In function '__blk_mq_get_ctx':
>>> block/blk-mq.h:79:22: error: dereferencing pointer to incomplete type 'struct request_queue'
> return per_cpu_ptr(q->queue_ctx, cpu);
> ^
> include/linux/percpu-defs.h:206:47: note: in definition of macro '__verify_pcpu_ptr'
> const void __percpu *__vpp_verify = (typeof((ptr) + 0))NULL; \
> ^
> include/linux/percpu-defs.h:250:47: note: in expansion of macro 'VERIFY_PERCPU_PTR'
> #define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); VERIFY_PERCPU_PTR(ptr); })
> ^
>>> block/blk-mq.h:79:9: note: in expansion of macro 'per_cpu_ptr'
> return per_cpu_ptr(q->queue_ctx, cpu);
> ^
> In file included from block/blk-integrity.c:31:0:
> block/blk.h: In function '__blk_get_queue':
>>> block/blk.h:54:2: error: implicit declaration of function 'kobject_get' [-Werror=implicit-function-declaration]
> kobject_get(&q->kobj);
> ^
> block/blk.h: At top level:
>>> block/blk.h:62:3: warning: 'struct request_list' declared inside parameter list
> gfp_t gfp_mask);
> ^
>>> block/blk.h:62:3: warning: its scope is only this definition or declaration, which is probably not what you want
> block/blk.h:63:25: warning: 'struct request_list' declared inside parameter list
> void blk_exit_rl(struct request_list *rl);
> ^
> block/blk.h: In function 'blk_mark_rq_complete':
>>> block/blk.h:108:48: error: dereferencing pointer to incomplete type 'struct request'
> return test_and_set_bit(REQ_ATOM_COMPLETE, &rq->atomic_flags);
> ^
> block/blk.h: In function '__elv_next_request':
>>> block/blk.h:130:9: error: implicit declaration of function 'list_entry_rq' [-Werror=implicit-function-declaration]
> rq = list_entry_rq(q->queue_head.next);
> ^
> In file included from include/uapi/linux/stddef.h:1:0,
> from include/linux/stddef.h:4,
> from include/uapi/linux/posix_types.h:4,
> from include/uapi/linux/types.h:13,
> from include/linux/types.h:5,
> from include/uapi/linux/capability.h:16,
> from include/linux/capability.h:15,
> from include/linux/sched.h:15,
> from include/linux/blkdev.h:4,
> from block/blk-integrity.c:23:
>>> block/blk.h:150:6: error: implicit declaration of function 'queue_flush_queueable' [-Werror=implicit-function-declaration]
> !queue_flush_queueable(q)) {
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
>>> block/blk.h:149:3: note: in expansion of macro 'if'
> if (fq->flush_pending_idx != fq->flush_running_idx &&
> ^
>>> block/blk.h:154:16: error: implicit declaration of function 'blk_queue_bypass' [-Werror=implicit-function-declaration]
> if (unlikely(blk_queue_bypass(q)) ||
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/blk.h:154:3: note: in expansion of macro 'if'
> if (unlikely(blk_queue_bypass(q)) ||
> ^
>>> block/blk.h:154:7: note: in expansion of macro 'unlikely'
> if (unlikely(blk_queue_bypass(q)) ||
> ^
> block/blk.h: In function 'elv_activate_rq':
>>> block/blk.h:164:7: error: dereferencing pointer to incomplete type 'struct elevator_queue'
> if (e->type->ops.elevator_activate_req_fn)
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/blk.h:164:2: note: in expansion of macro 'if'
> if (e->type->ops.elevator_activate_req_fn)
> ^
> block/blk.h: In function 'elv_deactivate_rq':
> block/blk.h:172:7: error: dereferencing pointer to incomplete type 'struct elevator_queue'
> if (e->type->ops.elevator_deactivate_req_fn)
> ^
> include/linux/compiler.h:147:28: note: in definition of macro '__trace_if'
> if (__builtin_constant_p((cond)) ? !!(cond) : \
> ^
> block/blk.h:172:2: note: in expansion of macro 'if'
> if (e->type->ops.elevator_deactivate_req_fn)
> ^
> In file included from block/blk-integrity.c:31:0:
> block/blk.h: In function 'blk_do_io_stat':
>>> block/blk.h:237:20: error: 'REQ_TYPE_FS' undeclared (first use in this function)
> (rq->cmd_type == REQ_TYPE_FS);
> ^
> block/blk.h:237:20: note: each undeclared identifier is reported only once for each function it appears in
> block/blk-integrity.c: In function 'blk_rq_count_integrity_sg':
>>> block/blk-integrity.c:50:19: error: storage size of 'iter' isn't known
> struct bvec_iter iter;
> ^
>>> block/blk-integrity.c:53:2: error: implicit declaration of function 'bio_for_each_integrity_vec' [-Werror=implicit-function-declaration]
> bio_for_each_integrity_vec(iv, bio, iter) {
> ^
> ..
>
> ---
> 0-DAY kernel test infrastructure Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all Intel Corporation
^ permalink raw reply [flat|nested] 72+ messages in thread
end of thread, other threads:[~2015-11-17 16:26 UTC | newest]
Thread overview: 72+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-16 13:05 [PATCH v4 00/32] HiSilicon SAS driver John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 01/32] [SCSI] sas: centralise ssp frame information units John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 02/32] devicetree: bindings: scsi: HiSi SAS John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:56 ` Rob Herring
2015-11-16 13:05 ` [PATCH v4 03/32] scsi: hisi_sas: add initial bare main driver John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 17:35 ` kbuild test robot
2015-11-16 17:35 ` kbuild test robot
2015-11-17 16:24 ` John Garry
2015-11-16 13:05 ` [PATCH v4 04/32] scsi: hisi_sas: add scsi host registration John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 05/32] scsi: hisi_sas: scan device tree John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 21:10 ` kbuild test robot
2015-11-16 21:10 ` kbuild test robot
2015-11-16 13:05 ` [PATCH v4 06/32] scsi: hisi_sas: add HW DMA structures John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 07/32] scsi: hisi_sas: allocate memories and create pools John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 08/32] scsi: hisi_sas: add hisi_sas_remove John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 09/32] scsi: hisi_sas: add slot init code John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 10/32] scsi: hisi_sas: add cq structure initialization John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 11/32] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 12/32] scsi: hisi_sas: set dev DMA mask John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:05 ` [PATCH v4 13/32] scsi: hisi_sas: add hisi_hba workqueue John Garry
2015-11-16 13:05 ` John Garry
2015-11-16 13:06 ` [PATCH v4 14/32] scsi: hisi_sas: add hisi sas device type John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 15/32] scsi: hisi_sas: add phy and port init John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 16/32] scsi: hisi_sas: add timer and spinlock init John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 17/32] scsi: hisi_sas: add v1 hw module init John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 18/32] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 19/32] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 20/32] scsi: hisi_sas: add v1 hw interrupt init John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 21/32] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 22/32] scsi: hisi_sas: add ssp command function John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 23/32] scsi: hisi_sas: add cq interrupt handler John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 24/32] scsi: hisi_sas: add dev_found and dev_gone John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 25/32] scsi: hisi_sas: add abnormal irq handler John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 26/32] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 27/32] scsi: hisi_sas: add smp protocol support John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 28/32] scsi: hisi_sas: add scan finished and start John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 29/32] scsi: hisi_sas: add tmf methods John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 30/32] scsi: hisi_sas: add control phy handler John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 31/32] scsi: hisi_sas: add fatal irq handler John Garry
2015-11-16 13:06 ` John Garry
2015-11-16 13:06 ` [PATCH v4 32/32] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
2015-11-16 13:06 ` John Garry
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.