* [PATCH v4 0/13] Add mipi dsi support for rk3288
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Arnd Bergmann, Takashi Iwai, Kumar Gala, Ian Campbell,
Rob Herring, Jeff Chen, Thierry Reding, linux-clk,
Alexandru M Stan, Sonny Rao, Kever Yang, Arnaud Ebalard,
Huang Lin, Inki Dae, Pawel Moll, Jonathan Cameron, devicetree,
Michael Turquette, Stephen Boyd, Vincent Palatin,
Kuninori Morimoto, Rahul Sharma, linux-arm-kernel, Liu Ying,
Andrew Bresticker, Doug Anderson, linux-kernel, Andy Yan,
Dmitry Torokhov, Mark Rutland, Russell King, Sean Paul,
Roger Chen
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.
This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.
The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.
This patchset is base on the patchset from Ying.liu@freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>
Changes in v4:
use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
remove gpr property from example, since it is noused now.
add the description about ports
eliminate some warnning
Alphabetically arranged the name
Changes in v3:
move the dw_mipi_dsi.txt to Documentation/devicetree/bindings/display/bridge
move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
move boe,tv080wum-nl0.txt to bindings/display/panel/
Changes in v2:
add the mipi clk id in a single patch
As Thierry.Reding comment, add a documentation for this panel.
Chris Zhong (11):
clk: rockchip: add id for mipidsi sclk on rk3288
clk: rockchip: add mipidsi clocks on rk3288
drm/rockchip: return a true clock rate to adjusted_mode
drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
of: add vendor prefix for boe
drm/panel: simple: Add support for BOE TV080WUM-NL0
drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree
binding
ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
Liu Ying (2):
drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
bridge driver
.../bindings/display/bridge/dw_mipi_dsi.txt | 80 ++
.../bindings/display/panel/boe,tv080wum-nl0.txt | 7 +
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 56 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +-
arch/arm/boot/dts/rk3288.dtsi | 39 +
drivers/clk/rockchip/clk-rk3288.c | 2 +-
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 34 +
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 +++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 8 +
include/drm/bridge/dw_mipi_dsi.h | 27 +
include/drm/drm_mipi_dsi.h | 14 +
include/dt-bindings/clock/rk3288-cru.h | 1 +
18 files changed, 1615 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
create mode 100644 include/drm/bridge/dw_mipi_dsi.h
--
2.6.3
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PATCH v4 0/13] Add mipi dsi support for rk3288
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Arnd Bergmann, Takashi Iwai, Kumar Gala, Ian Campbell,
Rob Herring, Jeff Chen, Thierry Reding, linux-clk,
Alexandru M Stan, Sonny Rao, Kever Yang, Arnaud Ebalard,
Huang Lin, Inki Dae, Pawel Moll, Jonathan Cameron, devicetree,
Michael Turquette, Stephen Boyd, Vincent Palatin,
Kuninori Morimoto
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.
This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.
The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.
This patchset is base on the patchset from Ying.liu@freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>
Changes in v4:
use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
remove gpr property from example, since it is noused now.
add the description about ports
eliminate some warnning
Alphabetically arranged the name
Changes in v3:
move the dw_mipi_dsi.txt to Documentation/devicetree/bindings/display/bridge
move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
move boe,tv080wum-nl0.txt to bindings/display/panel/
Changes in v2:
add the mipi clk id in a single patch
As Thierry.Reding comment, add a documentation for this panel.
Chris Zhong (11):
clk: rockchip: add id for mipidsi sclk on rk3288
clk: rockchip: add mipidsi clocks on rk3288
drm/rockchip: return a true clock rate to adjusted_mode
drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
of: add vendor prefix for boe
drm/panel: simple: Add support for BOE TV080WUM-NL0
drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree
binding
ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
Liu Ying (2):
drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
bridge driver
.../bindings/display/bridge/dw_mipi_dsi.txt | 80 ++
.../bindings/display/panel/boe,tv080wum-nl0.txt | 7 +
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 56 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +-
arch/arm/boot/dts/rk3288.dtsi | 39 +
drivers/clk/rockchip/clk-rk3288.c | 2 +-
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 34 +
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 +++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 8 +
include/drm/bridge/dw_mipi_dsi.h | 27 +
include/drm/drm_mipi_dsi.h | 14 +
include/dt-bindings/clock/rk3288-cru.h | 1 +
18 files changed, 1615 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
create mode 100644 include/drm/bridge/dw_mipi_dsi.h
--
2.6.3
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PATCH v4 0/13] Add mipi dsi support for rk3288
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.
This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.
The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.
This patchset is base on the patchset from Ying.liu at freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>
Changes in v4:
use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
remove gpr property from example, since it is noused now.
add the description about ports
eliminate some warnning
Alphabetically arranged the name
Changes in v3:
move the dw_mipi_dsi.txt to Documentation/devicetree/bindings/display/bridge
move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
move boe,tv080wum-nl0.txt to bindings/display/panel/
Changes in v2:
add the mipi clk id in a single patch
As Thierry.Reding comment, add a documentation for this panel.
Chris Zhong (11):
clk: rockchip: add id for mipidsi sclk on rk3288
clk: rockchip: add mipidsi clocks on rk3288
drm/rockchip: return a true clock rate to adjusted_mode
drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
of: add vendor prefix for boe
drm/panel: simple: Add support for BOE TV080WUM-NL0
drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree
binding
ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
Liu Ying (2):
drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
bridge driver
.../bindings/display/bridge/dw_mipi_dsi.txt | 80 ++
.../bindings/display/panel/boe,tv080wum-nl0.txt | 7 +
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 56 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +-
arch/arm/boot/dts/rk3288.dtsi | 39 +
drivers/clk/rockchip/clk-rk3288.c | 2 +-
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++
drivers/gpu/drm/panel/panel-simple.c | 34 +
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 +++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 8 +
include/drm/bridge/dw_mipi_dsi.h | 27 +
include/drm/drm_mipi_dsi.h | 14 +
include/dt-bindings/clock/rk3288-cru.h | 1 +
18 files changed, 1615 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
create mode 100644 include/drm/bridge/dw_mipi_dsi.h
--
2.6.3
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PATCH v4 01/13] clk: rockchip: add id for mipidsi sclk on rk3288
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Doug Anderson, Kever Yang, Huang Lin, Sonny Rao, Jeff Chen,
Roger Chen, Alexandru M Stan, devicetree, linux-kernel
Adds a new id for the sclk supplying the mipidsi on rk3288 socs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
add the mipi clk id in a single patch
include/dt-bindings/clock/rk3288-cru.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index c719aac..b07cdd3 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,7 @@
#define SCLK_USBPHY480M_SRC 122
#define SCLK_PVTM_CORE 123
#define SCLK_PVTM_GPU 124
+#define SCLK_MIPI_24M 125
#define SCLK_MAC 151
#define SCLK_MACREF_OUT 152
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 01/13] clk: rockchip: add id for mipidsi sclk on rk3288
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Alexandru M Stan, Huang Lin,
Pawel Moll, Ian Campbell, linux-kernel, Doug Anderson, dri-devel,
Kever Yang, Rob Herring, Roger Chen, Kumar Gala, Chris Zhong,
rmk+kernel, Sonny Rao, ajaykumar.rs, Jeff Chen
Adds a new id for the sclk supplying the mipidsi on rk3288 socs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
add the mipi clk id in a single patch
include/dt-bindings/clock/rk3288-cru.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index c719aac..b07cdd3 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,7 @@
#define SCLK_USBPHY480M_SRC 122
#define SCLK_PVTM_CORE 123
#define SCLK_PVTM_GPU 124
+#define SCLK_MIPI_24M 125
#define SCLK_MAC 151
#define SCLK_MACREF_OUT 152
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 02/13] clk: rockchip: add mipidsi clocks on rk3288
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Michael Turquette, Stephen Boyd, linux-clk, linux-arm-kernel,
linux-kernel
sclk_mipidsi_24m is the gating of mipi dsi phy.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/clk/rockchip/clk-rk3288.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..c7d7ebf 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -709,7 +709,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
- GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+ GATE(SCLK_MIPI_24M, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
/* sclk_gpu gates */
GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 02/13] clk: rockchip: add mipidsi clocks on rk3288
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Michael Turquette, Stephen Boyd, linux-kernel, dri-devel,
linux-clk, Chris Zhong, rmk+kernel, ajaykumar.rs,
linux-arm-kernel
sclk_mipidsi_24m is the gating of mipi dsi phy.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/clk/rockchip/clk-rk3288.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..c7d7ebf 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -709,7 +709,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
- GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+ GATE(SCLK_MIPI_24M, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
/* sclk_gpu gates */
GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 02/13] clk: rockchip: add mipidsi clocks on rk3288
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
sclk_mipidsi_24m is the gating of mipi dsi phy.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/clk/rockchip/clk-rk3288.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 9040878..c7d7ebf 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -709,7 +709,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
GATE(SCLK_LCDC_PWM1, "sclk_lcdc_pwm1", "xin24m", 0, RK3288_CLKGATE_CON(13), 11, GFLAGS),
GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK3288_CLKGATE_CON(5), 9, GFLAGS),
GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK3288_CLKGATE_CON(5), 10, GFLAGS),
- GATE(0, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
+ GATE(SCLK_MIPI_24M, "sclk_mipidsi_24m", "xin24m", 0, RK3288_CLKGATE_CON(5), 15, GFLAGS),
/* sclk_gpu gates */
GATE(ACLK_GPU, "aclk_gpu", "sclk_gpu", 0, RK3288_CLKGATE_CON(18), 0, GFLAGS),
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
linux-arm-kernel, linux-kernel
Since the mipi dsi driver need to use the clock of vop to make the
calculation of Blanking. But sometimes the clock driver can not set a
accurate clock_rate for vop, get it by clk_round_rate before mode_set,
so we can get the true value.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..eff545b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1136,9 +1136,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ struct vop *vop = to_vop(crtc);
+
if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
return false;
+ adjusted_mode->clock =
+ clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
+
return true;
}
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: linux-kernel, dri-devel, Chris Zhong, rmk+kernel, ajaykumar.rs,
linux-arm-kernel
Since the mipi dsi driver need to use the clock of vop to make the
calculation of Blanking. But sometimes the clock driver can not set a
accurate clock_rate for vop, get it by clk_round_rate before mode_set,
so we can get the true value.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..eff545b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1136,9 +1136,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ struct vop *vop = to_vop(crtc);
+
if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
return false;
+ adjusted_mode->clock =
+ clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
+
return true;
}
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
Since the mipi dsi driver need to use the clock of vop to make the
calculation of Blanking. But sometimes the clock driver can not set a
accurate clock_rate for vop, get it by clk_round_rate before mode_set,
so we can get the true value.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 5d8ae5e..eff545b 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1136,9 +1136,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
+ struct vop *vop = to_vop(crtc);
+
if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
return false;
+ adjusted_mode->clock =
+ clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
+
return true;
}
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 04/13] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Liu Ying, Liu Ying,
Chris Zhong, linux-kernel
From: Liu Ying <Ying.liu@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/drm/drm_mipi_dsi.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index f1d8d0d..3662021 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -163,6 +163,20 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
return container_of(dev, struct mipi_dsi_device, dev);
}
+static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+ switch (fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ case MIPI_DSI_FMT_RGB666:
+ return 24;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ return 18;
+ case MIPI_DSI_FMT_RGB565:
+ return 16;
+ }
+ return -EINVAL;
+}
+
struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
int mipi_dsi_attach(struct mipi_dsi_device *dsi);
int mipi_dsi_detach(struct mipi_dsi_device *dsi);
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 04/13] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: linux-kernel, dri-devel, Chris Zhong, rmk+kernel, ajaykumar.rs
From: Liu Ying <Ying.liu@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/drm/drm_mipi_dsi.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index f1d8d0d..3662021 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -163,6 +163,20 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
return container_of(dev, struct mipi_dsi_device, dev);
}
+static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt)
+{
+ switch (fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ case MIPI_DSI_FMT_RGB666:
+ return 24;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ return 18;
+ case MIPI_DSI_FMT_RGB565:
+ return 16;
+ }
+ return -EINVAL;
+}
+
struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np);
int mipi_dsi_attach(struct mipi_dsi_device *dsi);
int mipi_dsi_detach(struct mipi_dsi_device *dsi);
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Liu Ying, Liu Ying,
Chris Zhong, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell,
Kumar Gala, devicetree, linux-kernel
From: Liu Ying <Ying.liu@freescale.com>
This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
host controller DRM bridge driver.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
remove gpr property from example, since it is noused now.
add the description about ports
Changes in v3:
move the dw_mipi_dsi.txt to Documentation/devicetree/bindings/display/bridge
Changes in v2: None
.../bindings/display/bridge/dw_mipi_dsi.txt | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..8572ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,80 @@
+Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
+
+The controller is a digital core that implements all protocol functions
+defined in the MIPI DSI specification, providing an interface between
+the system and the MIPI DPHY, and allowing communication with a MIPI DSI
+compliant display.
+
+Required properties:
+ - #address-cells: Should be <1>.
+ - #size-cells: Should be <0>.
+ - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
+ for i.MX6q/sdl SoCs. For other SoCs, please refer to their specific
+ device tree binding documentations. A common compatible string
+ "snps,dw-mipi-dsi" should be appended for all SoCs.
+ - reg: Represent the physical address range of the controller.
+ - interrupts: Represent the controller's interrupt to the CPU(s).
+ - clocks, clock-names: Phandles to the controller's pll reference
+ clock(ref), configuration clock(cfg) and APB clock(pclk), as
+ described in [1].
+ - port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi-rockchip.txt
+
+
+For more required properties, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+Required sub-nodes:
+ - A node to represent a DSI peripheral as described in [2].
+
+For more required sub-nodes, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+
+example:
+ gpr: iomuxc-gpr@020e0000 {
+ /* ... */
+ };
+
+ mipi_dsi: mipi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x021e0000 0x4000>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_IPG>;
+ clock-names = "ref", "cfg", "pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "truly,tft480800-16-e-dsi";
+ reg = <0>;
+ /* ... */
+ };
+ };
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, linux-kernel,
dri-devel, Rob Herring, Kumar Gala, Chris Zhong, rmk+kernel,
ajaykumar.rs
From: Liu Ying <Ying.liu@freescale.com>
This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
host controller DRM bridge driver.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
remove gpr property from example, since it is noused now.
add the description about ports
Changes in v3:
move the dw_mipi_dsi.txt to Documentation/devicetree/bindings/display/bridge
Changes in v2: None
.../bindings/display/bridge/dw_mipi_dsi.txt | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..8572ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,80 @@
+Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
+
+The controller is a digital core that implements all protocol functions
+defined in the MIPI DSI specification, providing an interface between
+the system and the MIPI DPHY, and allowing communication with a MIPI DSI
+compliant display.
+
+Required properties:
+ - #address-cells: Should be <1>.
+ - #size-cells: Should be <0>.
+ - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
+ for i.MX6q/sdl SoCs. For other SoCs, please refer to their specific
+ device tree binding documentations. A common compatible string
+ "snps,dw-mipi-dsi" should be appended for all SoCs.
+ - reg: Represent the physical address range of the controller.
+ - interrupts: Represent the controller's interrupt to the CPU(s).
+ - clocks, clock-names: Phandles to the controller's pll reference
+ clock(ref), configuration clock(cfg) and APB clock(pclk), as
+ described in [1].
+ - port@[X]: SoC specific port nodes with endpoint definitions as defined
+ in Documentation/devicetree/bindings/media/video-interfaces.txt,
+ please refer to the SoC specific binding document:
+ * Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi-rockchip.txt
+
+
+For more required properties, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+Required sub-nodes:
+ - A node to represent a DSI peripheral as described in [2].
+
+For more required sub-nodes, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+
+example:
+ gpr: iomuxc-gpr@020e0000 {
+ /* ... */
+ };
+
+ mipi_dsi: mipi@021e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0x021e0000 0x4000>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+ <&clks IMX6QDL_CLK_MIPI_IPG>;
+ clock-names = "ref", "cfg", "pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mipi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_mipi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "truly,tft480800-16-e-dsi";
+ reg = <0>;
+ /* ... */
+ };
+ };
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Inki Dae, Takashi Iwai, Vincent Palatin, Andy Yan, Rahul Sharma,
Sean Paul, Andrew Bresticker, linux-kernel
add Synopsys DesignWare MIPI DSI host controller driver support.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
eliminate some warnning
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
include/drm/bridge/dw_mipi_dsi.h | 27 +
4 files changed, 1095 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
create mode 100644 include/drm/bridge/dw_mipi_dsi.h
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 6dddd39..c0900e0 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -22,6 +22,17 @@ config DRM_DW_HDMI_AHB_AUDIO
Designware HDMI block. This is used in conjunction with
the i.MX6 HDMI driver.
+config DRM_DW_MIPI_DSI
+ tristate "Synopsys DesignWare MIPI DSI host controller bridge"
+ depends on DRM
+ select DRM_KMS_HELPER
+ select DRM_MIPI_DSI
+ select DRM_PANEL
+ help
+ Choose this if you want to use the Synopsys DesignWare MIPI DSI host
+ controller bridge. If M is selected, the module will be
+ called dw_mipi_dsi. DRM_MIPI_DSI support is required for this driver
+ to work.
config DRM_NXP_PTN3460
tristate "NXP PTN3460 DP/LVDS bridge"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index d4e28be..d908c4b 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -2,5 +2,6 @@ ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
+obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw_mipi_dsi.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
diff --git a/drivers/gpu/drm/bridge/dw_mipi_dsi.c b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
new file mode 100644
index 0000000..23b612d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
@@ -0,0 +1,1056 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <video/mipi_display.h>
+
+#define DSI_VERSION 0x00
+
+#define DSI_PWR_UP 0x04
+#define RESET 0
+#define POWERUP BIT(0)
+
+#define DSI_CLKMGR_CFG 0x08
+#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0)
+
+#define DSI_DPI_VCID 0x0c
+#define DPI_VID(vid) (((vid) & 0x3) << 0)
+
+#define DSI_DPI_COLOR_CODING 0x10
+#define EN18_LOOSELY BIT(8)
+#define DPI_COLOR_CODING_16BIT_1 0x0
+#define DPI_COLOR_CODING_16BIT_2 0x1
+#define DPI_COLOR_CODING_16BIT_3 0x2
+#define DPI_COLOR_CODING_18BIT_1 0x3
+#define DPI_COLOR_CODING_18BIT_2 0x4
+#define DPI_COLOR_CODING_24BIT 0x5
+
+#define DSI_DPI_CFG_POL 0x14
+#define COLORM_ACTIVE_LOW BIT(4)
+#define SHUTD_ACTIVE_LOW BIT(3)
+#define HSYNC_ACTIVE_LOW BIT(2)
+#define VSYNC_ACTIVE_LOW BIT(1)
+#define DATAEN_ACTIVE_LOW BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM 0x18
+#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p) ((p) & 0xff)
+
+#define DSI_DBI_CFG 0x20
+#define DSI_DBI_CMDSIZE 0x28
+
+#define DSI_PCKHDL_CFG 0x2c
+#define EN_CRC_RX BIT(4)
+#define EN_ECC_RX BIT(3)
+#define EN_BTA BIT(2)
+#define EN_EOTP_RX BIT(1)
+#define EN_EOTP_TX BIT(0)
+
+#define DSI_MODE_CFG 0x34
+#define ENABLE_VIDEO_MODE 0
+#define ENABLE_CMD_MODE BIT(0)
+
+#define DSI_VID_MODE_CFG 0x38
+#define FRAME_BTA_ACK BIT(14)
+#define ENABLE_LOW_POWER (0x3f << 8)
+#define ENABLE_LOW_POWER_MASK (0x3f << 8)
+#define VID_MODE_TYPE_BURST_SYNC_PULSES 0x2
+#define VID_MODE_TYPE_MASK 0x3
+
+#define DSI_VID_PKT_SIZE 0x3c
+#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0)
+#define VID_PKT_MAX_SIZE 0x3fff
+
+#define DSI_VID_HSA_TIME 0x48
+#define DSI_VID_HBP_TIME 0x4c
+#define DSI_VID_HLINE_TIME 0x50
+#define DSI_VID_VSA_LINES 0x54
+#define DSI_VID_VBP_LINES 0x58
+#define DSI_VID_VFP_LINES 0x5c
+#define DSI_VID_VACTIVE_LINES 0x60
+#define DSI_CMD_MODE_CFG 0x68
+#define MAX_RD_PKT_SIZE_LP BIT(24)
+#define DCS_LW_TX_LP BIT(19)
+#define DCS_SR_0P_TX_LP BIT(18)
+#define DCS_SW_1P_TX_LP BIT(17)
+#define DCS_SW_0P_TX_LP BIT(16)
+#define GEN_LW_TX_LP BIT(14)
+#define GEN_SR_2P_TX_LP BIT(13)
+#define GEN_SR_1P_TX_LP BIT(12)
+#define GEN_SR_0P_TX_LP BIT(11)
+#define GEN_SW_2P_TX_LP BIT(10)
+#define GEN_SW_1P_TX_LP BIT(9)
+#define GEN_SW_0P_TX_LP BIT(8)
+#define EN_ACK_RQST BIT(1)
+#define EN_TEAR_FX BIT(0)
+
+#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
+ DCS_LW_TX_LP | \
+ DCS_SR_0P_TX_LP | \
+ DCS_SW_1P_TX_LP | \
+ DCS_SW_0P_TX_LP | \
+ GEN_LW_TX_LP | \
+ GEN_SR_2P_TX_LP | \
+ GEN_SR_1P_TX_LP | \
+ GEN_SR_0P_TX_LP | \
+ GEN_SW_2P_TX_LP | \
+ GEN_SW_1P_TX_LP | \
+ GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR 0x6c
+#define GEN_HDATA(data) (((data) & 0xffff) << 8)
+#define GEN_HDATA_MASK (0xffff << 8)
+#define GEN_HTYPE(type) (((type) & 0xff) << 0)
+#define GEN_HTYPE_MASK 0xff
+
+#define DSI_GEN_PLD_DATA 0x70
+
+#define DSI_CMD_PKT_STATUS 0x74
+#define GEN_CMD_EMPTY BIT(0)
+#define GEN_CMD_FULL BIT(1)
+#define GEN_PLD_W_EMPTY BIT(2)
+#define GEN_PLD_W_FULL BIT(3)
+#define GEN_PLD_R_EMPTY BIT(4)
+#define GEN_PLD_R_FULL BIT(5)
+#define GEN_RD_CMD_BUSY BIT(6)
+
+#define DSI_TO_CNT_CFG 0x78
+#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p) ((p) & 0xffff)
+
+#define DSI_BTA_TO_CNT 0x8c
+
+#define DSI_LPCLK_CTRL 0x94
+#define AUTO_CLKLANE_CTRL BIT(1)
+#define PHY_TXREQUESTCLKHS BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG 0x98
+#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG 0x9c
+#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff)
+
+#define DSI_PHY_RSTZ 0xa0
+#define PHY_DISFORCEPLL 0
+#define PHY_ENFORCEPLL BIT(3)
+#define PHY_DISABLECLK 0
+#define PHY_ENABLECLK BIT(2)
+#define PHY_RSTZ 0
+#define PHY_UNRSTZ BIT(1)
+#define PHY_SHUTDOWNZ 0
+#define PHY_UNSHUTDOWNZ BIT(0)
+
+#define DSI_PHY_IF_CFG 0xa4
+#define N_LANES(n) ((((n) - 1) & 0x3) << 0)
+#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
+
+#define DSI_PHY_STATUS 0xb0
+#define LOCK BIT(0)
+#define STOP_STATE_CLK_LANE BIT(2)
+
+#define DSI_PHY_TST_CTRL0 0xb4
+#define PHY_TESTCLK BIT(1)
+#define PHY_UNTESTCLK 0
+#define PHY_TESTCLR BIT(0)
+#define PHY_UNTESTCLR 0
+
+#define DSI_PHY_TST_CTRL1 0xb8
+#define PHY_TESTEN BIT(16)
+#define PHY_UNTESTEN 0
+#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
+#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
+
+#define DSI_INT_ST0 0xbc
+#define DSI_INT_ST1 0xc0
+#define DSI_INT_MSK0 0xc4
+#define DSI_INT_MSK1 0xc8
+
+#define PHY_STATUS_TIMEOUT 10
+#define CMD_PKT_STATUS_TIMEOUT 20
+
+struct dw_mipi_dsi {
+ struct mipi_dsi_host dsi_host;
+ struct drm_connector connector;
+ struct drm_encoder *encoder;
+ struct drm_bridge *bridge;
+ struct drm_panel *panel;
+ struct device *dev;
+
+ void __iomem *base;
+
+ struct clk *pllref_clk;
+ struct clk *cfg_clk;
+ struct clk *pclk;
+
+ unsigned int lane_mbps; /* per lane */
+ u32 channel;
+ u32 lanes;
+ u32 format;
+ u16 input_div;
+ u16 feedback_div;
+ struct drm_display_mode *mode;
+
+ const struct dw_mipi_dsi_plat_data *pdata;
+
+ bool enabled;
+};
+
+enum {
+ STATUS_TO_CLEAR,
+ STATUS_TO_SET,
+};
+
+enum dw_mipi_dsi_mode {
+ DW_MIPI_DSI_CMD_MODE,
+ DW_MIPI_DSI_VID_MODE,
+};
+
+struct dphy_pll_testdin_map {
+ unsigned int max_mbps;
+ u8 testdin;
+};
+
+/* The table is based on 27MHz DPHY pll reference clock. */
+static const struct dphy_pll_testdin_map dptdin_map[] = {
+ {90, 0x00}, {100, 0x10}, {110, 0x20}, {130, 0x01},
+ {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
+ {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
+ {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
+ {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
+ {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
+ {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
+ {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
+ {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
+ {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
+};
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+ return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
+{
+ return container_of(con, struct dw_mipi_dsi, connector);
+}
+
+int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder)
+{
+ struct dw_mipi_dsi *dsi = encoder->bridge->driver_private;
+
+ return dsi->format;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_get_encoder_pixel_format);
+
+static int max_mbps_to_testdin(unsigned int max_mbps)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
+ if (dptdin_map[i].max_mbps > max_mbps)
+ return dptdin_map[i].testdin;
+
+ return -EINVAL;
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+ writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+ return readl(dsi->base + reg);
+}
+
+static inline void dsi_modify(struct dw_mipi_dsi *dsi, u32 reg,
+ u32 mask, u32 val)
+{
+ u32 v;
+
+ v = readl(dsi->base + reg);
+ v &= ~mask;
+ v |= val;
+ writel(v, dsi->base + reg);
+}
+
+static int check_status(struct dw_mipi_dsi *dsi, u32 reg, u32 status,
+ unsigned int timeout, bool to_set)
+{
+ unsigned long expire;
+ bool out;
+ u32 val;
+
+ expire = jiffies + msecs_to_jiffies(timeout);
+ for (;;) {
+ val = dsi_read(dsi, reg);
+ out = to_set ? ((val & status) == status) : !(val & status);
+ if (out)
+ break;
+
+ if (time_after(jiffies, expire))
+ return -ETIMEDOUT;
+
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
+{
+ unsigned long expire;
+ int refresh, two_frames;
+
+ refresh = drm_mode_vrefresh(dsi->mode);
+ two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+
+ expire = jiffies + msecs_to_jiffies(two_frames);
+ while (time_before(jiffies, expire))
+ cpu_relax();
+}
+
+static void dw_mipi_dsi_phy_test(struct dw_mipi_dsi *dsi, u8 test_code,
+ u8 test_data)
+{
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(test_code));
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(test_data));
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+}
+
+static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
+{
+ int ret, testdin, vco;
+
+ vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
+
+ testdin = max_mbps_to_testdin(dsi->lane_mbps);
+ if (testdin < 0) {
+ dev_err(dsi->dev,
+ "failed to get testdin for %dmbps lane clock\n",
+ dsi->lane_mbps);
+ return testdin;
+ }
+
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+
+ dw_mipi_dsi_phy_test(dsi, 0x10, 0x80 | (vco & 0x7) << 3 | 0x3);
+ dw_mipi_dsi_phy_test(dsi, 0x11, 0x8);
+ dw_mipi_dsi_phy_test(dsi, 0x12, 0xc0);
+
+ dw_mipi_dsi_phy_test(dsi, 0x44, testdin << 1);
+
+ dw_mipi_dsi_phy_test(dsi, 0x17, dsi->input_div - 1);
+ dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) & 0x1f);
+ dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) >> 5 | 0x80);
+ dw_mipi_dsi_phy_test(dsi, 0x19, 0x30);
+
+ dw_mipi_dsi_phy_test(dsi, 0x20, 0x4d);
+ dw_mipi_dsi_phy_test(dsi, 0x21, 0x3d);
+ dw_mipi_dsi_phy_test(dsi, 0x21, 0xdf);
+ dw_mipi_dsi_phy_test(dsi, 0x22, 0x7);
+ dw_mipi_dsi_phy_test(dsi, 0x22, 0x87);
+ dw_mipi_dsi_phy_test(dsi, 0x70, 0x80 | 0xf);
+ dw_mipi_dsi_phy_test(dsi, 0x71, 0x80 | 0x55);
+ dw_mipi_dsi_phy_test(dsi, 0x72, 0x40 | 0xa);
+
+ dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK
+ | PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+ ret = check_status(dsi, DSI_PHY_STATUS, LOCK,
+ PHY_STATUS_TIMEOUT, STATUS_TO_SET);
+ if (ret < 0) {
+ dev_err(dsi->dev, "failed to wait for phy lock state\n");
+ return ret;
+ }
+ ret = check_status(dsi, DSI_PHY_STATUS, STOP_STATE_CLK_LANE,
+ PHY_STATUS_TIMEOUT, STATUS_TO_SET);
+ if (ret < 0) {
+ dev_err(dsi->dev,
+ "failed to wait for phy clk lane stop state\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
+{
+ int bpp, i;
+ unsigned int max_mbps = 0, target_mbps = 1000;
+ unsigned long mpclk, pllref, tmp;
+ int m = 1, n = 1, pre;
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
+ if (max_mbps < dptdin_map[i].max_mbps)
+ max_mbps = dptdin_map[i].max_mbps;
+ }
+
+ bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+ if (bpp < 0) {
+ dev_err(dsi->dev, "failed to get bpp for pixel format %d\n",
+ dsi->format);
+ return bpp;
+ }
+
+ mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
+ if (mpclk) {
+ /* take 1 / 0.9, since mbps must big than bandwidth of RGB */
+ tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
+ if (tmp < max_mbps)
+ target_mbps = tmp;
+ else
+ dev_err(dsi->dev, "DPHY clock frequency is out of range\n");
+ }
+
+ pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
+ tmp = pllref;
+
+ for (i = 1; i < 6; i++) {
+ pre = pllref / i;
+ if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
+ tmp = target_mbps % pre;
+ n = i;
+ m = target_mbps / pre;
+ }
+ if (tmp == 0)
+ break;
+ }
+
+ dsi->lane_mbps = pllref / n * m;
+ dsi->input_div = n;
+ dsi->feedback_div = m;
+
+ return 0;
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *device)
+{
+ struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+ if (device->lanes > dsi->pdata->max_data_lanes) {
+ dev_err(dsi->dev, "the number of data lanes(%d) is too many\n",
+ device->lanes);
+ return -EINVAL;
+ }
+
+ if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
+ !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
+ dev_err(dsi->dev, "device mode is unsupported\n");
+ return -EINVAL;
+ }
+
+ dsi->lanes = device->lanes;
+ dsi->channel = device->channel;
+ dsi->format = device->format;
+ dsi->panel = of_drm_find_panel(device->dev.of_node);
+ drm_panel_attach(dsi->panel, &dsi->connector);
+
+ return 0;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *device)
+{
+ struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+ drm_panel_detach(dsi->panel);
+
+ return 0;
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
+{
+ int ret;
+
+ ret = check_status(dsi, DSI_CMD_PKT_STATUS, GEN_CMD_FULL,
+ CMD_PKT_STATUS_TIMEOUT, STATUS_TO_CLEAR);
+ if (ret < 0) {
+ dev_err(dsi->dev, "failed to get available command FIFO\n");
+ return ret;
+ }
+
+ dsi_write(dsi, DSI_GEN_HDR, val);
+
+ ret = check_status(dsi, DSI_CMD_PKT_STATUS,
+ GEN_CMD_EMPTY | GEN_PLD_W_EMPTY,
+ CMD_PKT_STATUS_TIMEOUT, STATUS_TO_SET);
+ if (ret < 0) {
+ dev_err(dsi->dev, "failed to write command FIFO\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ const u16 *tx_buf = msg->tx_buf;
+ u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
+
+ if (msg->tx_len > 2) {
+ dev_err(dsi->dev, "too long tx buf length %d for short write\n",
+ (int)msg->tx_len);
+ return -EINVAL;
+ }
+
+ return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ const u32 *tx_buf = msg->tx_buf;
+ int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
+ u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
+ u32 remainder = 0;
+
+ if (msg->tx_len < 3) {
+ dev_err(dsi->dev, "wrong tx buf length %d for long write\n",
+ (int)msg->tx_len);
+ return -EINVAL;
+ }
+
+ while (DIV_ROUND_UP(len, pld_data_bytes)) {
+ if (len < pld_data_bytes) {
+ memcpy(&remainder, tx_buf, len);
+ dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+ len = 0;
+ } else {
+ dsi_write(dsi, DSI_GEN_PLD_DATA, *tx_buf);
+ tx_buf++;
+ len -= pld_data_bytes;
+ }
+ ret = check_status(dsi, DSI_CMD_PKT_STATUS, GEN_PLD_W_FULL,
+ CMD_PKT_STATUS_TIMEOUT, STATUS_TO_CLEAR);
+ if (ret < 0) {
+ dev_err(dsi->dev,
+ "failed to get available write payload FIFO\n");
+ return ret;
+ }
+ }
+
+ return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct dw_mipi_dsi *dsi = host_to_dsi(host);
+ int ret;
+
+ switch (msg->type) {
+ case MIPI_DSI_DCS_SHORT_WRITE:
+ case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+ ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
+ break;
+ case MIPI_DSI_DCS_LONG_WRITE:
+ ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
+ break;
+ default:
+ dev_err(dsi->dev, "unsupported message type\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+ .attach = dw_mipi_dsi_host_attach,
+ .detach = dw_mipi_dsi_host_detach,
+ .transfer = dw_mipi_dsi_host_transfer,
+};
+
+static enum drm_connector_status
+dw_mipi_dsi_detect(struct drm_connector *connector, bool force)
+{
+ return connector_status_connected;
+}
+
+static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static struct drm_connector_funcs dw_mipi_dsi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = dw_mipi_dsi_detect,
+ .destroy = dw_mipi_dsi_drm_connector_destroy,
+};
+
+static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
+{
+ struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+ return drm_panel_get_modes(dsi->panel);
+}
+
+static enum drm_mode_status dw_mipi_dsi_mode_valid(
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+ enum drm_mode_status mode_status = MODE_OK;
+
+ if (dsi->pdata->mode_valid)
+ mode_status = dsi->pdata->mode_valid(connector, mode);
+
+ return mode_status;
+}
+
+static struct drm_encoder *dw_mipi_dsi_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+ return dsi->encoder;
+}
+
+static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
+ .get_modes = dw_mipi_dsi_connector_get_modes,
+ .mode_valid = dw_mipi_dsi_mode_valid,
+ .best_encoder = dw_mipi_dsi_connector_best_encoder,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+ u32 val;
+
+ val = VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER;
+
+ dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+ enum dw_mipi_dsi_mode mode)
+{
+ if (mode == DW_MIPI_DSI_CMD_MODE) {
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+ } else {
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+ dw_mipi_dsi_video_mode_config(dsi);
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+ }
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+ struct dw_mipi_dsi *dsi = bridge->driver_private;
+
+ if (dsi->enabled)
+ return;
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ dw_mipi_dsi_phy_init(dsi);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+ dw_mipi_dsi_wait_for_two_frames(dsi);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ drm_panel_prepare(dsi->panel);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+
+ drm_panel_enable(dsi->panel);
+
+ dsi->enabled = true;
+}
+
+static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+ struct dw_mipi_dsi *dsi = bridge->driver_private;
+ unsigned long expire;
+
+ if (!dsi->enabled)
+ return;
+
+ drm_panel_disable(dsi->panel);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ drm_panel_unprepare(dsi->panel);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+
+ /*
+ * This is necessary to make sure the peripheral
+ * will be driven normally when the display is
+ * enabled again later.
+ */
+ expire = jiffies + msecs_to_jiffies(120);
+ while (time_before(jiffies, expire))
+ cpu_relax();
+
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ dw_mipi_dsi_disable(dsi);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+
+ dsi->enabled = false;
+}
+
+static void dw_mipi_dsi_bridge_nope(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+ | PHY_RSTZ | PHY_SHUTDOWNZ);
+ dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
+ TX_ESC_CLK_DIVIDSION(7));
+ dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
+{
+ u32 val = 0, calor = 0;
+
+ switch (dsi->format) {
+ case MIPI_DSI_FMT_RGB888:
+ calor = DPI_COLOR_CODING_24BIT;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ calor = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ calor = DPI_COLOR_CODING_18BIT_1;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ calor = DPI_COLOR_CODING_16BIT_1;
+ break;
+ }
+
+ if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
+ val |= VSYNC_ACTIVE_LOW;
+ if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
+ val |= HSYNC_ACTIVE_LOW;
+
+ dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+ dsi_write(dsi, DSI_DPI_COLOR_CODING, calor);
+ dsi_write(dsi, DSI_DPI_CFG_POL, val);
+ dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+ | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
+{
+ dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+ dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+ dsi_write(dsi, DSI_CMD_MODE_CFG, CMD_MODE_ALL_LP);
+ dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+ u32 hcomponent)
+{
+ u32 frac, lbcc;
+
+ lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+ frac = lbcc % dsi->mode->clock;
+ lbcc = lbcc / dsi->mode->clock;
+ if (frac)
+ lbcc++;
+
+ return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi)
+{
+ u32 htotal, hsa, hbp, lbcc;
+ struct drm_display_mode *mode = dsi->mode;
+
+ htotal = mode->htotal;
+ hsa = mode->hsync_end - mode->hsync_start;
+ hbp = mode->htotal - mode->hsync_end;
+
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, htotal);
+ dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hsa);
+ dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hbp);
+ dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi)
+{
+ u32 vactive, vsa, vfp, vbp;
+ struct drm_display_mode *mode = dsi->mode;
+
+ vactive = mode->vdisplay;
+ vsa = mode->vsync_end - mode->vsync_start;
+ vfp = mode->vsync_start - mode->vdisplay;
+ vbp = mode->vtotal - mode->vsync_end;
+
+ dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+ dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+ dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+ dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
+ | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+
+ dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+ | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+ N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+ dsi_read(dsi, DSI_INT_ST0);
+ dsi_read(dsi, DSI_INT_ST1);
+ dsi_write(dsi, DSI_INT_MSK0, 0);
+ dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct dw_mipi_dsi *dsi = bridge->driver_private;
+ int ret;
+
+ dsi->mode = adjusted_mode;
+
+ ret = dw_mipi_dsi_get_lane_bps(dsi);
+ if (ret < 0)
+ return;
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ dw_mipi_dsi_init(dsi);
+ dw_mipi_dsi_dpi_config(dsi, mode);
+ dw_mipi_dsi_packet_handler_config(dsi);
+ dw_mipi_dsi_video_mode_config(dsi);
+ dw_mipi_dsi_video_packet_config(dsi, mode);
+ dw_mipi_dsi_command_mode_config(dsi);
+ dw_mipi_dsi_line_timer_config(dsi);
+ dw_mipi_dsi_vertical_timing_config(dsi);
+ dw_mipi_dsi_dphy_timing_config(dsi);
+ dw_mipi_dsi_dphy_interface_config(dsi);
+ dw_mipi_dsi_clear_err(dsi);
+ dw_mipi_dsi_phy_init(dsi);
+ dw_mipi_dsi_wait_for_two_frames(dsi);
+ drm_panel_prepare(dsi->panel);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+}
+
+static bool dw_mipi_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+ .enable = dw_mipi_dsi_bridge_enable,
+ .disable = dw_mipi_dsi_bridge_disable,
+ .pre_enable = dw_mipi_dsi_bridge_nope,
+ .post_disable = dw_mipi_dsi_bridge_nope,
+ .mode_set = dw_mipi_dsi_bridge_mode_set,
+ .mode_fixup = dw_mipi_dsi_bridge_mode_fixup,
+};
+
+static int dw_mipi_dsi_register(struct drm_device *drm, struct dw_mipi_dsi *dsi)
+{
+ struct drm_encoder *encoder = dsi->encoder;
+ struct drm_bridge *bridge;
+ int ret;
+
+ bridge = devm_kzalloc(drm->dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ dsi->bridge = bridge;
+ bridge->driver_private = dsi;
+
+ bridge->funcs = &dw_mipi_dsi_bridge_funcs;
+ ret = drm_bridge_attach(drm, bridge);
+ if (ret) {
+ DRM_ERROR("failed to initialize bridge with drm\n");
+ return ret;
+ }
+
+ encoder->bridge = bridge;
+
+ drm_connector_helper_add(&dsi->connector,
+ &dw_mipi_dsi_connector_helper_funcs);
+ drm_connector_init(drm, &dsi->connector, &dw_mipi_dsi_connector_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ drm_mode_connector_attach_encoder(&dsi->connector, dsi->encoder);
+
+ return 0;
+}
+
+int dw_mipi_dsi_bind(struct device *dev, struct device *master, void *data,
+ struct drm_encoder *encoder,
+ const struct dw_mipi_dsi_plat_data *pdata)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ struct drm_device *drm = data;
+ struct dw_mipi_dsi *dsi;
+ u32 val;
+ int ret;
+
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+
+ dsi->pdata = pdata;
+ dsi->dev = dev;
+ dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+ dsi->dsi_host.dev = dev;
+ dsi->encoder = encoder;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ dsi->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(dsi->base))
+ return PTR_ERR(dsi->base);
+
+ dsi->pllref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(dsi->pllref_clk)) {
+ ret = PTR_ERR(dsi->pllref_clk);
+ dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
+ return ret;
+ }
+ clk_prepare_enable(dsi->pllref_clk);
+
+ dsi->cfg_clk = devm_clk_get(dev, "cfg");
+ if (IS_ERR(dsi->cfg_clk))
+ dev_warn(dev, "Have no configuration clock\n");
+
+ dsi->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(dsi->pclk)) {
+ ret = PTR_ERR(dsi->pclk);
+ dev_err(dev, "Unable to get configuration clock: %d\n", ret);
+ goto err_pllref;
+ }
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ val = dsi_read(dsi, DSI_VERSION);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+
+ dev_info(dev, "version number is 0x%08x\n", val);
+
+ ret = dw_mipi_dsi_register(drm, dsi);
+ if (ret) {
+ dev_err(dev, "Unable to register dsi: %d\n", ret);
+ goto err_pllref;
+ }
+ dev_set_drvdata(dev, dsi);
+
+ return mipi_dsi_host_register(&dsi->dsi_host);
+
+err_pllref:
+ clk_disable_unprepare(dsi->pllref_clk);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data)
+{
+ struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
+
+ mipi_dsi_host_unregister(&dsi->dsi_host);
+ clk_disable_unprepare(dsi->pllref_clk);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_DESCRIPTION("Synopsys DesignWare MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h
new file mode 100644
index 0000000..2e351e4
--- /dev/null
+++ b/include/drm/bridge/dw_mipi_dsi.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#ifndef __DW_MIPI_DSI__
+#define __DW_MIPI_DSI__
+
+#include <drm/drmP.h>
+
+struct dw_mipi_dsi_plat_data {
+ unsigned int max_data_lanes;
+ enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
+ struct drm_display_mode *mode);
+};
+
+int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder);
+
+int dw_mipi_dsi_bind(struct device *dev, struct device *master,
+ void *data, struct drm_encoder *encoder,
+ const struct dw_mipi_dsi_plat_data *pdata);
+void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data);
+#endif /* __DW_MIPI_DSI__ */
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Vincent Palatin, Andrew Bresticker, linux-kernel, dri-devel,
Andy Yan, Chris Zhong, rmk+kernel, ajaykumar.rs, Rahul Sharma
add Synopsys DesignWare MIPI DSI host controller driver support.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
eliminate some warnning
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/bridge/Kconfig | 11 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
include/drm/bridge/dw_mipi_dsi.h | 27 +
4 files changed, 1095 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
create mode 100644 include/drm/bridge/dw_mipi_dsi.h
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 6dddd39..c0900e0 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -22,6 +22,17 @@ config DRM_DW_HDMI_AHB_AUDIO
Designware HDMI block. This is used in conjunction with
the i.MX6 HDMI driver.
+config DRM_DW_MIPI_DSI
+ tristate "Synopsys DesignWare MIPI DSI host controller bridge"
+ depends on DRM
+ select DRM_KMS_HELPER
+ select DRM_MIPI_DSI
+ select DRM_PANEL
+ help
+ Choose this if you want to use the Synopsys DesignWare MIPI DSI host
+ controller bridge. If M is selected, the module will be
+ called dw_mipi_dsi. DRM_MIPI_DSI support is required for this driver
+ to work.
config DRM_NXP_PTN3460
tristate "NXP PTN3460 DP/LVDS bridge"
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index d4e28be..d908c4b 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -2,5 +2,6 @@ ccflags-y := -Iinclude/drm
obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
+obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw_mipi_dsi.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
diff --git a/drivers/gpu/drm/bridge/dw_mipi_dsi.c b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
new file mode 100644
index 0000000..23b612d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
@@ -0,0 +1,1056 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <video/mipi_display.h>
+
+#define DSI_VERSION 0x00
+
+#define DSI_PWR_UP 0x04
+#define RESET 0
+#define POWERUP BIT(0)
+
+#define DSI_CLKMGR_CFG 0x08
+#define TO_CLK_DIVIDSION(div) (((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVIDSION(div) (((div) & 0xff) << 0)
+
+#define DSI_DPI_VCID 0x0c
+#define DPI_VID(vid) (((vid) & 0x3) << 0)
+
+#define DSI_DPI_COLOR_CODING 0x10
+#define EN18_LOOSELY BIT(8)
+#define DPI_COLOR_CODING_16BIT_1 0x0
+#define DPI_COLOR_CODING_16BIT_2 0x1
+#define DPI_COLOR_CODING_16BIT_3 0x2
+#define DPI_COLOR_CODING_18BIT_1 0x3
+#define DPI_COLOR_CODING_18BIT_2 0x4
+#define DPI_COLOR_CODING_24BIT 0x5
+
+#define DSI_DPI_CFG_POL 0x14
+#define COLORM_ACTIVE_LOW BIT(4)
+#define SHUTD_ACTIVE_LOW BIT(3)
+#define HSYNC_ACTIVE_LOW BIT(2)
+#define VSYNC_ACTIVE_LOW BIT(1)
+#define DATAEN_ACTIVE_LOW BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM 0x18
+#define OUTVACT_LPCMD_TIME(p) (((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p) ((p) & 0xff)
+
+#define DSI_DBI_CFG 0x20
+#define DSI_DBI_CMDSIZE 0x28
+
+#define DSI_PCKHDL_CFG 0x2c
+#define EN_CRC_RX BIT(4)
+#define EN_ECC_RX BIT(3)
+#define EN_BTA BIT(2)
+#define EN_EOTP_RX BIT(1)
+#define EN_EOTP_TX BIT(0)
+
+#define DSI_MODE_CFG 0x34
+#define ENABLE_VIDEO_MODE 0
+#define ENABLE_CMD_MODE BIT(0)
+
+#define DSI_VID_MODE_CFG 0x38
+#define FRAME_BTA_ACK BIT(14)
+#define ENABLE_LOW_POWER (0x3f << 8)
+#define ENABLE_LOW_POWER_MASK (0x3f << 8)
+#define VID_MODE_TYPE_BURST_SYNC_PULSES 0x2
+#define VID_MODE_TYPE_MASK 0x3
+
+#define DSI_VID_PKT_SIZE 0x3c
+#define VID_PKT_SIZE(p) (((p) & 0x3fff) << 0)
+#define VID_PKT_MAX_SIZE 0x3fff
+
+#define DSI_VID_HSA_TIME 0x48
+#define DSI_VID_HBP_TIME 0x4c
+#define DSI_VID_HLINE_TIME 0x50
+#define DSI_VID_VSA_LINES 0x54
+#define DSI_VID_VBP_LINES 0x58
+#define DSI_VID_VFP_LINES 0x5c
+#define DSI_VID_VACTIVE_LINES 0x60
+#define DSI_CMD_MODE_CFG 0x68
+#define MAX_RD_PKT_SIZE_LP BIT(24)
+#define DCS_LW_TX_LP BIT(19)
+#define DCS_SR_0P_TX_LP BIT(18)
+#define DCS_SW_1P_TX_LP BIT(17)
+#define DCS_SW_0P_TX_LP BIT(16)
+#define GEN_LW_TX_LP BIT(14)
+#define GEN_SR_2P_TX_LP BIT(13)
+#define GEN_SR_1P_TX_LP BIT(12)
+#define GEN_SR_0P_TX_LP BIT(11)
+#define GEN_SW_2P_TX_LP BIT(10)
+#define GEN_SW_1P_TX_LP BIT(9)
+#define GEN_SW_0P_TX_LP BIT(8)
+#define EN_ACK_RQST BIT(1)
+#define EN_TEAR_FX BIT(0)
+
+#define CMD_MODE_ALL_LP (MAX_RD_PKT_SIZE_LP | \
+ DCS_LW_TX_LP | \
+ DCS_SR_0P_TX_LP | \
+ DCS_SW_1P_TX_LP | \
+ DCS_SW_0P_TX_LP | \
+ GEN_LW_TX_LP | \
+ GEN_SR_2P_TX_LP | \
+ GEN_SR_1P_TX_LP | \
+ GEN_SR_0P_TX_LP | \
+ GEN_SW_2P_TX_LP | \
+ GEN_SW_1P_TX_LP | \
+ GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR 0x6c
+#define GEN_HDATA(data) (((data) & 0xffff) << 8)
+#define GEN_HDATA_MASK (0xffff << 8)
+#define GEN_HTYPE(type) (((type) & 0xff) << 0)
+#define GEN_HTYPE_MASK 0xff
+
+#define DSI_GEN_PLD_DATA 0x70
+
+#define DSI_CMD_PKT_STATUS 0x74
+#define GEN_CMD_EMPTY BIT(0)
+#define GEN_CMD_FULL BIT(1)
+#define GEN_PLD_W_EMPTY BIT(2)
+#define GEN_PLD_W_FULL BIT(3)
+#define GEN_PLD_R_EMPTY BIT(4)
+#define GEN_PLD_R_FULL BIT(5)
+#define GEN_RD_CMD_BUSY BIT(6)
+
+#define DSI_TO_CNT_CFG 0x78
+#define HSTX_TO_CNT(p) (((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p) ((p) & 0xffff)
+
+#define DSI_BTA_TO_CNT 0x8c
+
+#define DSI_LPCLK_CTRL 0x94
+#define AUTO_CLKLANE_CTRL BIT(1)
+#define PHY_TXREQUESTCLKHS BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG 0x98
+#define PHY_CLKHS2LP_TIME(lbcc) (((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc) ((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG 0x9c
+#define PHY_HS2LP_TIME(lbcc) (((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc) (((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc) ((lbcc) & 0x7fff)
+
+#define DSI_PHY_RSTZ 0xa0
+#define PHY_DISFORCEPLL 0
+#define PHY_ENFORCEPLL BIT(3)
+#define PHY_DISABLECLK 0
+#define PHY_ENABLECLK BIT(2)
+#define PHY_RSTZ 0
+#define PHY_UNRSTZ BIT(1)
+#define PHY_SHUTDOWNZ 0
+#define PHY_UNSHUTDOWNZ BIT(0)
+
+#define DSI_PHY_IF_CFG 0xa4
+#define N_LANES(n) ((((n) - 1) & 0x3) << 0)
+#define PHY_STOP_WAIT_TIME(cycle) (((cycle) & 0xff) << 8)
+
+#define DSI_PHY_STATUS 0xb0
+#define LOCK BIT(0)
+#define STOP_STATE_CLK_LANE BIT(2)
+
+#define DSI_PHY_TST_CTRL0 0xb4
+#define PHY_TESTCLK BIT(1)
+#define PHY_UNTESTCLK 0
+#define PHY_TESTCLR BIT(0)
+#define PHY_UNTESTCLR 0
+
+#define DSI_PHY_TST_CTRL1 0xb8
+#define PHY_TESTEN BIT(16)
+#define PHY_UNTESTEN 0
+#define PHY_TESTDOUT(n) (((n) & 0xff) << 8)
+#define PHY_TESTDIN(n) (((n) & 0xff) << 0)
+
+#define DSI_INT_ST0 0xbc
+#define DSI_INT_ST1 0xc0
+#define DSI_INT_MSK0 0xc4
+#define DSI_INT_MSK1 0xc8
+
+#define PHY_STATUS_TIMEOUT 10
+#define CMD_PKT_STATUS_TIMEOUT 20
+
+struct dw_mipi_dsi {
+ struct mipi_dsi_host dsi_host;
+ struct drm_connector connector;
+ struct drm_encoder *encoder;
+ struct drm_bridge *bridge;
+ struct drm_panel *panel;
+ struct device *dev;
+
+ void __iomem *base;
+
+ struct clk *pllref_clk;
+ struct clk *cfg_clk;
+ struct clk *pclk;
+
+ unsigned int lane_mbps; /* per lane */
+ u32 channel;
+ u32 lanes;
+ u32 format;
+ u16 input_div;
+ u16 feedback_div;
+ struct drm_display_mode *mode;
+
+ const struct dw_mipi_dsi_plat_data *pdata;
+
+ bool enabled;
+};
+
+enum {
+ STATUS_TO_CLEAR,
+ STATUS_TO_SET,
+};
+
+enum dw_mipi_dsi_mode {
+ DW_MIPI_DSI_CMD_MODE,
+ DW_MIPI_DSI_VID_MODE,
+};
+
+struct dphy_pll_testdin_map {
+ unsigned int max_mbps;
+ u8 testdin;
+};
+
+/* The table is based on 27MHz DPHY pll reference clock. */
+static const struct dphy_pll_testdin_map dptdin_map[] = {
+ {90, 0x00}, {100, 0x10}, {110, 0x20}, {130, 0x01},
+ {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
+ {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
+ {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
+ {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
+ {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
+ {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
+ {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
+ {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
+ {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
+};
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+ return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
+{
+ return container_of(con, struct dw_mipi_dsi, connector);
+}
+
+int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder)
+{
+ struct dw_mipi_dsi *dsi = encoder->bridge->driver_private;
+
+ return dsi->format;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_get_encoder_pixel_format);
+
+static int max_mbps_to_testdin(unsigned int max_mbps)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++)
+ if (dptdin_map[i].max_mbps > max_mbps)
+ return dptdin_map[i].testdin;
+
+ return -EINVAL;
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+ writel(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+ return readl(dsi->base + reg);
+}
+
+static inline void dsi_modify(struct dw_mipi_dsi *dsi, u32 reg,
+ u32 mask, u32 val)
+{
+ u32 v;
+
+ v = readl(dsi->base + reg);
+ v &= ~mask;
+ v |= val;
+ writel(v, dsi->base + reg);
+}
+
+static int check_status(struct dw_mipi_dsi *dsi, u32 reg, u32 status,
+ unsigned int timeout, bool to_set)
+{
+ unsigned long expire;
+ bool out;
+ u32 val;
+
+ expire = jiffies + msecs_to_jiffies(timeout);
+ for (;;) {
+ val = dsi_read(dsi, reg);
+ out = to_set ? ((val & status) == status) : !(val & status);
+ if (out)
+ break;
+
+ if (time_after(jiffies, expire))
+ return -ETIMEDOUT;
+
+ cpu_relax();
+ }
+
+ return 0;
+}
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
+{
+ unsigned long expire;
+ int refresh, two_frames;
+
+ refresh = drm_mode_vrefresh(dsi->mode);
+ two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+
+ expire = jiffies + msecs_to_jiffies(two_frames);
+ while (time_before(jiffies, expire))
+ cpu_relax();
+}
+
+static void dw_mipi_dsi_phy_test(struct dw_mipi_dsi *dsi, u8 test_code,
+ u8 test_data)
+{
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(test_code));
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
+ PHY_TESTDIN(test_data));
+
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
+ dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
+}
+
+static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
+{
+ int ret, testdin, vco;
+
+ vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
+
+ testdin = max_mbps_to_testdin(dsi->lane_mbps);
+ if (testdin < 0) {
+ dev_err(dsi->dev,
+ "failed to get testdin for %dmbps lane clock\n",
+ dsi->lane_mbps);
+ return testdin;
+ }
+
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+
+ dw_mipi_dsi_phy_test(dsi, 0x10, 0x80 | (vco & 0x7) << 3 | 0x3);
+ dw_mipi_dsi_phy_test(dsi, 0x11, 0x8);
+ dw_mipi_dsi_phy_test(dsi, 0x12, 0xc0);
+
+ dw_mipi_dsi_phy_test(dsi, 0x44, testdin << 1);
+
+ dw_mipi_dsi_phy_test(dsi, 0x17, dsi->input_div - 1);
+ dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) & 0x1f);
+ dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) >> 5 | 0x80);
+ dw_mipi_dsi_phy_test(dsi, 0x19, 0x30);
+
+ dw_mipi_dsi_phy_test(dsi, 0x20, 0x4d);
+ dw_mipi_dsi_phy_test(dsi, 0x21, 0x3d);
+ dw_mipi_dsi_phy_test(dsi, 0x21, 0xdf);
+ dw_mipi_dsi_phy_test(dsi, 0x22, 0x7);
+ dw_mipi_dsi_phy_test(dsi, 0x22, 0x87);
+ dw_mipi_dsi_phy_test(dsi, 0x70, 0x80 | 0xf);
+ dw_mipi_dsi_phy_test(dsi, 0x71, 0x80 | 0x55);
+ dw_mipi_dsi_phy_test(dsi, 0x72, 0x40 | 0xa);
+
+ dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK
+ | PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+ ret = check_status(dsi, DSI_PHY_STATUS, LOCK,
+ PHY_STATUS_TIMEOUT, STATUS_TO_SET);
+ if (ret < 0) {
+ dev_err(dsi->dev, "failed to wait for phy lock state\n");
+ return ret;
+ }
+ ret = check_status(dsi, DSI_PHY_STATUS, STOP_STATE_CLK_LANE,
+ PHY_STATUS_TIMEOUT, STATUS_TO_SET);
+ if (ret < 0) {
+ dev_err(dsi->dev,
+ "failed to wait for phy clk lane stop state\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
+{
+ int bpp, i;
+ unsigned int max_mbps = 0, target_mbps = 1000;
+ unsigned long mpclk, pllref, tmp;
+ int m = 1, n = 1, pre;
+
+ for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
+ if (max_mbps < dptdin_map[i].max_mbps)
+ max_mbps = dptdin_map[i].max_mbps;
+ }
+
+ bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
+ if (bpp < 0) {
+ dev_err(dsi->dev, "failed to get bpp for pixel format %d\n",
+ dsi->format);
+ return bpp;
+ }
+
+ mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
+ if (mpclk) {
+ /* take 1 / 0.9, since mbps must big than bandwidth of RGB */
+ tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
+ if (tmp < max_mbps)
+ target_mbps = tmp;
+ else
+ dev_err(dsi->dev, "DPHY clock frequency is out of range\n");
+ }
+
+ pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
+ tmp = pllref;
+
+ for (i = 1; i < 6; i++) {
+ pre = pllref / i;
+ if ((tmp > (target_mbps % pre)) && (target_mbps / pre < 512)) {
+ tmp = target_mbps % pre;
+ n = i;
+ m = target_mbps / pre;
+ }
+ if (tmp == 0)
+ break;
+ }
+
+ dsi->lane_mbps = pllref / n * m;
+ dsi->input_div = n;
+ dsi->feedback_div = m;
+
+ return 0;
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *device)
+{
+ struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+ if (device->lanes > dsi->pdata->max_data_lanes) {
+ dev_err(dsi->dev, "the number of data lanes(%d) is too many\n",
+ device->lanes);
+ return -EINVAL;
+ }
+
+ if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
+ !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
+ dev_err(dsi->dev, "device mode is unsupported\n");
+ return -EINVAL;
+ }
+
+ dsi->lanes = device->lanes;
+ dsi->channel = device->channel;
+ dsi->format = device->format;
+ dsi->panel = of_drm_find_panel(device->dev.of_node);
+ drm_panel_attach(dsi->panel, &dsi->connector);
+
+ return 0;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *device)
+{
+ struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+ drm_panel_detach(dsi->panel);
+
+ return 0;
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 val)
+{
+ int ret;
+
+ ret = check_status(dsi, DSI_CMD_PKT_STATUS, GEN_CMD_FULL,
+ CMD_PKT_STATUS_TIMEOUT, STATUS_TO_CLEAR);
+ if (ret < 0) {
+ dev_err(dsi->dev, "failed to get available command FIFO\n");
+ return ret;
+ }
+
+ dsi_write(dsi, DSI_GEN_HDR, val);
+
+ ret = check_status(dsi, DSI_CMD_PKT_STATUS,
+ GEN_CMD_EMPTY | GEN_PLD_W_EMPTY,
+ CMD_PKT_STATUS_TIMEOUT, STATUS_TO_SET);
+ if (ret < 0) {
+ dev_err(dsi->dev, "failed to write command FIFO\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ const u16 *tx_buf = msg->tx_buf;
+ u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
+
+ if (msg->tx_len > 2) {
+ dev_err(dsi->dev, "too long tx buf length %d for short write\n",
+ (int)msg->tx_len);
+ return -EINVAL;
+ }
+
+ return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
+ const struct mipi_dsi_msg *msg)
+{
+ const u32 *tx_buf = msg->tx_buf;
+ int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
+ u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
+ u32 remainder = 0;
+
+ if (msg->tx_len < 3) {
+ dev_err(dsi->dev, "wrong tx buf length %d for long write\n",
+ (int)msg->tx_len);
+ return -EINVAL;
+ }
+
+ while (DIV_ROUND_UP(len, pld_data_bytes)) {
+ if (len < pld_data_bytes) {
+ memcpy(&remainder, tx_buf, len);
+ dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+ len = 0;
+ } else {
+ dsi_write(dsi, DSI_GEN_PLD_DATA, *tx_buf);
+ tx_buf++;
+ len -= pld_data_bytes;
+ }
+ ret = check_status(dsi, DSI_CMD_PKT_STATUS, GEN_PLD_W_FULL,
+ CMD_PKT_STATUS_TIMEOUT, STATUS_TO_CLEAR);
+ if (ret < 0) {
+ dev_err(dsi->dev,
+ "failed to get available write payload FIFO\n");
+ return ret;
+ }
+ }
+
+ return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct dw_mipi_dsi *dsi = host_to_dsi(host);
+ int ret;
+
+ switch (msg->type) {
+ case MIPI_DSI_DCS_SHORT_WRITE:
+ case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+ ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
+ break;
+ case MIPI_DSI_DCS_LONG_WRITE:
+ ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
+ break;
+ default:
+ dev_err(dsi->dev, "unsupported message type\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+ .attach = dw_mipi_dsi_host_attach,
+ .detach = dw_mipi_dsi_host_detach,
+ .transfer = dw_mipi_dsi_host_transfer,
+};
+
+static enum drm_connector_status
+dw_mipi_dsi_detect(struct drm_connector *connector, bool force)
+{
+ return connector_status_connected;
+}
+
+static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static struct drm_connector_funcs dw_mipi_dsi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = dw_mipi_dsi_detect,
+ .destroy = dw_mipi_dsi_drm_connector_destroy,
+};
+
+static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
+{
+ struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+ return drm_panel_get_modes(dsi->panel);
+}
+
+static enum drm_mode_status dw_mipi_dsi_mode_valid(
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+ enum drm_mode_status mode_status = MODE_OK;
+
+ if (dsi->pdata->mode_valid)
+ mode_status = dsi->pdata->mode_valid(connector, mode);
+
+ return mode_status;
+}
+
+static struct drm_encoder *dw_mipi_dsi_connector_best_encoder(
+ struct drm_connector *connector)
+{
+ struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+ return dsi->encoder;
+}
+
+static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
+ .get_modes = dw_mipi_dsi_connector_get_modes,
+ .mode_valid = dw_mipi_dsi_mode_valid,
+ .best_encoder = dw_mipi_dsi_connector_best_encoder,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+ u32 val;
+
+ val = VID_MODE_TYPE_BURST_SYNC_PULSES | ENABLE_LOW_POWER;
+
+ dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+ enum dw_mipi_dsi_mode mode)
+{
+ if (mode == DW_MIPI_DSI_CMD_MODE) {
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+ } else {
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+ dw_mipi_dsi_video_mode_config(dsi);
+ dsi_write(dsi, DSI_PWR_UP, POWERUP);
+ }
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+ struct dw_mipi_dsi *dsi = bridge->driver_private;
+
+ if (dsi->enabled)
+ return;
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ dw_mipi_dsi_phy_init(dsi);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+ dw_mipi_dsi_wait_for_two_frames(dsi);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ drm_panel_prepare(dsi->panel);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+
+ drm_panel_enable(dsi->panel);
+
+ dsi->enabled = true;
+}
+
+static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+ struct dw_mipi_dsi *dsi = bridge->driver_private;
+ unsigned long expire;
+
+ if (!dsi->enabled)
+ return;
+
+ drm_panel_disable(dsi->panel);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ drm_panel_unprepare(dsi->panel);
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+
+ /*
+ * This is necessary to make sure the peripheral
+ * will be driven normally when the display is
+ * enabled again later.
+ */
+ expire = jiffies + msecs_to_jiffies(120);
+ while (time_before(jiffies, expire))
+ cpu_relax();
+
+ dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+ dw_mipi_dsi_disable(dsi);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+
+ dsi->enabled = false;
+}
+
+static void dw_mipi_dsi_bridge_nope(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PWR_UP, RESET);
+ dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+ | PHY_RSTZ | PHY_SHUTDOWNZ);
+ dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
+ TX_ESC_CLK_DIVIDSION(7));
+ dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
+{
+ u32 val = 0, calor = 0;
+
+ switch (dsi->format) {
+ case MIPI_DSI_FMT_RGB888:
+ calor = DPI_COLOR_CODING_24BIT;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ calor = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ calor = DPI_COLOR_CODING_18BIT_1;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ calor = DPI_COLOR_CODING_16BIT_1;
+ break;
+ }
+
+ if (!(mode->flags & DRM_MODE_FLAG_PVSYNC))
+ val |= VSYNC_ACTIVE_LOW;
+ if (!(mode->flags & DRM_MODE_FLAG_PHSYNC))
+ val |= HSYNC_ACTIVE_LOW;
+
+ dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+ dsi_write(dsi, DSI_DPI_COLOR_CODING, calor);
+ dsi_write(dsi, DSI_DPI_CFG_POL, val);
+ dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+ | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
+{
+ dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+ dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+ dsi_write(dsi, DSI_CMD_MODE_CFG, CMD_MODE_ALL_LP);
+ dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+ u32 hcomponent)
+{
+ u32 frac, lbcc;
+
+ lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+ frac = lbcc % dsi->mode->clock;
+ lbcc = lbcc / dsi->mode->clock;
+ if (frac)
+ lbcc++;
+
+ return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi)
+{
+ u32 htotal, hsa, hbp, lbcc;
+ struct drm_display_mode *mode = dsi->mode;
+
+ htotal = mode->htotal;
+ hsa = mode->hsync_end - mode->hsync_start;
+ hbp = mode->htotal - mode->hsync_end;
+
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, htotal);
+ dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hsa);
+ dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hbp);
+ dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi)
+{
+ u32 vactive, vsa, vfp, vbp;
+ struct drm_display_mode *mode = dsi->mode;
+
+ vactive = mode->vdisplay;
+ vsa = mode->vsync_end - mode->vsync_start;
+ vfp = mode->vsync_start - mode->vdisplay;
+ vbp = mode->vtotal - mode->vsync_end;
+
+ dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+ dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+ dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+ dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
+ | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+
+ dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+ | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+ dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+ N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+ dsi_read(dsi, DSI_INT_ST0);
+ dsi_read(dsi, DSI_INT_ST1);
+ dsi_write(dsi, DSI_INT_MSK0, 0);
+ dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct dw_mipi_dsi *dsi = bridge->driver_private;
+ int ret;
+
+ dsi->mode = adjusted_mode;
+
+ ret = dw_mipi_dsi_get_lane_bps(dsi);
+ if (ret < 0)
+ return;
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ dw_mipi_dsi_init(dsi);
+ dw_mipi_dsi_dpi_config(dsi, mode);
+ dw_mipi_dsi_packet_handler_config(dsi);
+ dw_mipi_dsi_video_mode_config(dsi);
+ dw_mipi_dsi_video_packet_config(dsi, mode);
+ dw_mipi_dsi_command_mode_config(dsi);
+ dw_mipi_dsi_line_timer_config(dsi);
+ dw_mipi_dsi_vertical_timing_config(dsi);
+ dw_mipi_dsi_dphy_timing_config(dsi);
+ dw_mipi_dsi_dphy_interface_config(dsi);
+ dw_mipi_dsi_clear_err(dsi);
+ dw_mipi_dsi_phy_init(dsi);
+ dw_mipi_dsi_wait_for_two_frames(dsi);
+ drm_panel_prepare(dsi->panel);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+}
+
+static bool dw_mipi_dsi_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+ .enable = dw_mipi_dsi_bridge_enable,
+ .disable = dw_mipi_dsi_bridge_disable,
+ .pre_enable = dw_mipi_dsi_bridge_nope,
+ .post_disable = dw_mipi_dsi_bridge_nope,
+ .mode_set = dw_mipi_dsi_bridge_mode_set,
+ .mode_fixup = dw_mipi_dsi_bridge_mode_fixup,
+};
+
+static int dw_mipi_dsi_register(struct drm_device *drm, struct dw_mipi_dsi *dsi)
+{
+ struct drm_encoder *encoder = dsi->encoder;
+ struct drm_bridge *bridge;
+ int ret;
+
+ bridge = devm_kzalloc(drm->dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ dsi->bridge = bridge;
+ bridge->driver_private = dsi;
+
+ bridge->funcs = &dw_mipi_dsi_bridge_funcs;
+ ret = drm_bridge_attach(drm, bridge);
+ if (ret) {
+ DRM_ERROR("failed to initialize bridge with drm\n");
+ return ret;
+ }
+
+ encoder->bridge = bridge;
+
+ drm_connector_helper_add(&dsi->connector,
+ &dw_mipi_dsi_connector_helper_funcs);
+ drm_connector_init(drm, &dsi->connector, &dw_mipi_dsi_connector_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ drm_mode_connector_attach_encoder(&dsi->connector, dsi->encoder);
+
+ return 0;
+}
+
+int dw_mipi_dsi_bind(struct device *dev, struct device *master, void *data,
+ struct drm_encoder *encoder,
+ const struct dw_mipi_dsi_plat_data *pdata)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res;
+ struct drm_device *drm = data;
+ struct dw_mipi_dsi *dsi;
+ u32 val;
+ int ret;
+
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+
+ dsi->pdata = pdata;
+ dsi->dev = dev;
+ dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+ dsi->dsi_host.dev = dev;
+ dsi->encoder = encoder;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ dsi->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(dsi->base))
+ return PTR_ERR(dsi->base);
+
+ dsi->pllref_clk = devm_clk_get(dev, "ref");
+ if (IS_ERR(dsi->pllref_clk)) {
+ ret = PTR_ERR(dsi->pllref_clk);
+ dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
+ return ret;
+ }
+ clk_prepare_enable(dsi->pllref_clk);
+
+ dsi->cfg_clk = devm_clk_get(dev, "cfg");
+ if (IS_ERR(dsi->cfg_clk))
+ dev_warn(dev, "Have no configuration clock\n");
+
+ dsi->pclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(dsi->pclk)) {
+ ret = PTR_ERR(dsi->pclk);
+ dev_err(dev, "Unable to get configuration clock: %d\n", ret);
+ goto err_pllref;
+ }
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_prepare_enable(dsi->cfg_clk);
+
+ clk_prepare_enable(dsi->pclk);
+ val = dsi_read(dsi, DSI_VERSION);
+ clk_disable_unprepare(dsi->pclk);
+
+ if (!IS_ERR(dsi->cfg_clk))
+ clk_disable_unprepare(dsi->cfg_clk);
+
+ dev_info(dev, "version number is 0x%08x\n", val);
+
+ ret = dw_mipi_dsi_register(drm, dsi);
+ if (ret) {
+ dev_err(dev, "Unable to register dsi: %d\n", ret);
+ goto err_pllref;
+ }
+ dev_set_drvdata(dev, dsi);
+
+ return mipi_dsi_host_register(&dsi->dsi_host);
+
+err_pllref:
+ clk_disable_unprepare(dsi->pllref_clk);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data)
+{
+ struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
+
+ mipi_dsi_host_unregister(&dsi->dsi_host);
+ clk_disable_unprepare(dsi->pllref_clk);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_DESCRIPTION("Synopsys DesignWare MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h
new file mode 100644
index 0000000..2e351e4
--- /dev/null
+++ b/include/drm/bridge/dw_mipi_dsi.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#ifndef __DW_MIPI_DSI__
+#define __DW_MIPI_DSI__
+
+#include <drm/drmP.h>
+
+struct dw_mipi_dsi_plat_data {
+ unsigned int max_data_lanes;
+ enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
+ struct drm_display_mode *mode);
+};
+
+int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder);
+
+int dw_mipi_dsi_bind(struct device *dev, struct device *master,
+ void *data, struct drm_encoder *encoder,
+ const struct dw_mipi_dsi_plat_data *pdata);
+void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data);
+#endif /* __DW_MIPI_DSI__ */
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
linux-kernel, linux-arm-kernel
Add support for Synopsys DesignWare MIPI DSI host controller which is
embedded in the rk3288 SoCs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 ++++++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +
4 files changed, 263 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..24395f3 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_DW_MIPI_DSI
+ bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
+ depends on DRM_ROCKCHIP
+ select DRM_DW_MIPI_DSI
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Synopsys DesignWare HDMI driver. If you want to
+ enable MIPI DSI on RK3288 based SoC, you should selet this
+ option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..6a97059 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw_mipi_dsi_rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
new file mode 100644
index 0000000..a0bb4eb
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_of.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define DRIVER_NAME "rockchip-mipi-dsi"
+
+#define GRF_SOC_CON6 0x025c
+#define DSI0_SEL_VOP_LIT (1 << 6)
+#define DSI1_SEL_VOP_LIT (1 << 9)
+
+struct rockchip_mipi_dsi {
+ struct drm_encoder encoder;
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+static inline struct rockchip_mipi_dsi *enc_to_dsi(struct drm_encoder *enc)
+{
+ return container_of(enc, struct rockchip_mipi_dsi, encoder);
+}
+
+static struct drm_encoder_funcs rockchip_mipi_dsi_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static int rockchip_mipi_parse_dt(struct rockchip_mipi_dsi *dsi)
+{
+ struct device_node *np = dsi->dev->of_node;
+
+ dsi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(dsi->regmap)) {
+ dev_err(dsi->dev, "Unable to get rockchip,grf\n");
+ return PTR_ERR(dsi->regmap);
+ }
+
+ return 0;
+}
+
+static bool rockchip_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void rockchip_mipi_dsi_encoder_prepare(struct drm_encoder *encoder)
+{
+ u32 encoder_pix_fmt, interface_pix_fmt;
+
+ encoder_pix_fmt = dw_mipi_dsi_get_encoder_pixel_format(encoder);
+
+ switch (encoder_pix_fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P888;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P666;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P565;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+
+ rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_DSI,
+ interface_pix_fmt);
+}
+
+static void rockchip_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void rockchip_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
+{
+ struct rockchip_mipi_dsi *dsi = enc_to_dsi(encoder);
+ u32 val;
+ int mux = rockchip_drm_encoder_get_mux_id(dsi->dev->of_node, encoder);
+
+ if (mux)
+ val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
+ else
+ val = DSI0_SEL_VOP_LIT << 16;
+
+ regmap_write(dsi->regmap, GRF_SOC_CON6, val);
+ dev_dbg(dsi->dev, "vop %s output to dsi0\n",
+ (mux) ? "LIT" : "BIG");
+}
+
+static void rockchip_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
+{
+}
+
+static struct drm_encoder_helper_funcs
+rockchip_mipi_dsi_encoder_helper_funcs = {
+ .mode_fixup = rockchip_mipi_dsi_encoder_mode_fixup,
+ .prepare = rockchip_mipi_dsi_encoder_prepare,
+ .mode_set = rockchip_mipi_dsi_encoder_mode_set,
+ .commit = rockchip_mipi_dsi_encoder_commit,
+ .disable = rockchip_mipi_dsi_encoder_disable,
+};
+
+static int rockchip_mipi_dsi_register(struct drm_device *drm,
+ struct rockchip_mipi_dsi *dsi)
+{
+ struct drm_encoder *encoder = &dsi->encoder;
+ struct device *dev = dsi->dev;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
+ dev->of_node);
+ /*
+ * If we failed to find the CRTC(s) which this encoder is
+ * supposed to be connected to, it's because the CRTC has
+ * not been registered yet. Defer probing, and hope that
+ * the required CRTC is added later.
+ */
+ if (encoder->possible_crtcs == 0)
+ return -EPROBE_DEFER;
+
+ drm_encoder_helper_add(&dsi->encoder,
+ &rockchip_mipi_dsi_encoder_helper_funcs);
+ drm_encoder_init(drm, &dsi->encoder, &rockchip_mipi_dsi_encoder_funcs,
+ DRM_MODE_ENCODER_DSI);
+ return 0;
+}
+
+static enum drm_mode_status rockchip_mipi_dsi_mode_valid(
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /*
+ * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
+ * register is 11-bit.
+ */
+ if (mode->hdisplay > 0x7ff)
+ return MODE_BAD_HVALUE;
+
+ /*
+ * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
+ * register is 11-bit.
+ */
+ if (mode->vdisplay > 0x7ff)
+ return MODE_BAD_VVALUE;
+
+ return MODE_OK;
+}
+
+static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
+ .max_data_lanes = 4,
+ .mode_valid = rockchip_mipi_dsi_mode_valid,
+};
+
+static const struct of_device_id rockchip_mipi_dsi_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3288-mipi-dsi",
+ .data = &rk3288_mipi_dsi_drv_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_mipi_dsi_dt_ids);
+
+static int rockchip_mipi_dsi_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ const struct of_device_id *of_id =
+ of_match_device(rockchip_mipi_dsi_dt_ids, dev);
+ const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
+ struct drm_device *drm = data;
+ struct rockchip_mipi_dsi *dsi;
+ int ret;
+
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+
+ dsi->dev = dev;
+
+ ret = rockchip_mipi_dsi_register(drm, dsi);
+ if (ret)
+ return ret;
+
+ ret = rockchip_mipi_parse_dt(dsi);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(dev, dsi);
+
+ return dw_mipi_dsi_bind(dev, master, data, &dsi->encoder, pdata);
+}
+
+static void rockchip_mipi_dsi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return dw_mipi_dsi_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_mipi_dsi_ops = {
+ .bind = rockchip_mipi_dsi_bind,
+ .unbind = rockchip_mipi_dsi_unbind,
+};
+
+static int rockchip_mipi_dsi_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &rockchip_mipi_dsi_ops);
+}
+
+static int rockchip_mipi_dsi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &rockchip_mipi_dsi_ops);
+ return 0;
+}
+
+static struct platform_driver rockchip_mipi_dsi_driver = {
+ .probe = rockchip_mipi_dsi_probe,
+ .remove = rockchip_mipi_dsi_remove,
+ .driver = {
+ .of_match_table = rockchip_mipi_dsi_dt_ids,
+ .name = DRIVER_NAME,
+ },
+};
+module_platform_driver(rockchip_mipi_dsi_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index eff545b..bfaa31a 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1199,6 +1199,9 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
case DRM_MODE_CONNECTOR_HDMIA:
VOP_CTRL_SET(vop, hdmi_en, 1);
break;
+ case DRM_MODE_CONNECTOR_DSI:
+ VOP_CTRL_SET(vop, mipi_en, 1);
+ break;
default:
DRM_ERROR("unsupport connector_type[%d]\n",
vop->connector_type);
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: linux-kernel, dri-devel, Chris Zhong, rmk+kernel, ajaykumar.rs,
linux-arm-kernel
Add support for Synopsys DesignWare MIPI DSI host controller which is
embedded in the rk3288 SoCs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 ++++++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +
4 files changed, 263 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..24395f3 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_DW_MIPI_DSI
+ bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
+ depends on DRM_ROCKCHIP
+ select DRM_DW_MIPI_DSI
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Synopsys DesignWare HDMI driver. If you want to
+ enable MIPI DSI on RK3288 based SoC, you should selet this
+ option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..6a97059 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw_mipi_dsi_rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
new file mode 100644
index 0000000..a0bb4eb
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_of.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define DRIVER_NAME "rockchip-mipi-dsi"
+
+#define GRF_SOC_CON6 0x025c
+#define DSI0_SEL_VOP_LIT (1 << 6)
+#define DSI1_SEL_VOP_LIT (1 << 9)
+
+struct rockchip_mipi_dsi {
+ struct drm_encoder encoder;
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+static inline struct rockchip_mipi_dsi *enc_to_dsi(struct drm_encoder *enc)
+{
+ return container_of(enc, struct rockchip_mipi_dsi, encoder);
+}
+
+static struct drm_encoder_funcs rockchip_mipi_dsi_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static int rockchip_mipi_parse_dt(struct rockchip_mipi_dsi *dsi)
+{
+ struct device_node *np = dsi->dev->of_node;
+
+ dsi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(dsi->regmap)) {
+ dev_err(dsi->dev, "Unable to get rockchip,grf\n");
+ return PTR_ERR(dsi->regmap);
+ }
+
+ return 0;
+}
+
+static bool rockchip_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void rockchip_mipi_dsi_encoder_prepare(struct drm_encoder *encoder)
+{
+ u32 encoder_pix_fmt, interface_pix_fmt;
+
+ encoder_pix_fmt = dw_mipi_dsi_get_encoder_pixel_format(encoder);
+
+ switch (encoder_pix_fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P888;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P666;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P565;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+
+ rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_DSI,
+ interface_pix_fmt);
+}
+
+static void rockchip_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void rockchip_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
+{
+ struct rockchip_mipi_dsi *dsi = enc_to_dsi(encoder);
+ u32 val;
+ int mux = rockchip_drm_encoder_get_mux_id(dsi->dev->of_node, encoder);
+
+ if (mux)
+ val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
+ else
+ val = DSI0_SEL_VOP_LIT << 16;
+
+ regmap_write(dsi->regmap, GRF_SOC_CON6, val);
+ dev_dbg(dsi->dev, "vop %s output to dsi0\n",
+ (mux) ? "LIT" : "BIG");
+}
+
+static void rockchip_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
+{
+}
+
+static struct drm_encoder_helper_funcs
+rockchip_mipi_dsi_encoder_helper_funcs = {
+ .mode_fixup = rockchip_mipi_dsi_encoder_mode_fixup,
+ .prepare = rockchip_mipi_dsi_encoder_prepare,
+ .mode_set = rockchip_mipi_dsi_encoder_mode_set,
+ .commit = rockchip_mipi_dsi_encoder_commit,
+ .disable = rockchip_mipi_dsi_encoder_disable,
+};
+
+static int rockchip_mipi_dsi_register(struct drm_device *drm,
+ struct rockchip_mipi_dsi *dsi)
+{
+ struct drm_encoder *encoder = &dsi->encoder;
+ struct device *dev = dsi->dev;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
+ dev->of_node);
+ /*
+ * If we failed to find the CRTC(s) which this encoder is
+ * supposed to be connected to, it's because the CRTC has
+ * not been registered yet. Defer probing, and hope that
+ * the required CRTC is added later.
+ */
+ if (encoder->possible_crtcs == 0)
+ return -EPROBE_DEFER;
+
+ drm_encoder_helper_add(&dsi->encoder,
+ &rockchip_mipi_dsi_encoder_helper_funcs);
+ drm_encoder_init(drm, &dsi->encoder, &rockchip_mipi_dsi_encoder_funcs,
+ DRM_MODE_ENCODER_DSI);
+ return 0;
+}
+
+static enum drm_mode_status rockchip_mipi_dsi_mode_valid(
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /*
+ * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
+ * register is 11-bit.
+ */
+ if (mode->hdisplay > 0x7ff)
+ return MODE_BAD_HVALUE;
+
+ /*
+ * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
+ * register is 11-bit.
+ */
+ if (mode->vdisplay > 0x7ff)
+ return MODE_BAD_VVALUE;
+
+ return MODE_OK;
+}
+
+static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
+ .max_data_lanes = 4,
+ .mode_valid = rockchip_mipi_dsi_mode_valid,
+};
+
+static const struct of_device_id rockchip_mipi_dsi_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3288-mipi-dsi",
+ .data = &rk3288_mipi_dsi_drv_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_mipi_dsi_dt_ids);
+
+static int rockchip_mipi_dsi_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ const struct of_device_id *of_id =
+ of_match_device(rockchip_mipi_dsi_dt_ids, dev);
+ const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
+ struct drm_device *drm = data;
+ struct rockchip_mipi_dsi *dsi;
+ int ret;
+
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+
+ dsi->dev = dev;
+
+ ret = rockchip_mipi_dsi_register(drm, dsi);
+ if (ret)
+ return ret;
+
+ ret = rockchip_mipi_parse_dt(dsi);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(dev, dsi);
+
+ return dw_mipi_dsi_bind(dev, master, data, &dsi->encoder, pdata);
+}
+
+static void rockchip_mipi_dsi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return dw_mipi_dsi_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_mipi_dsi_ops = {
+ .bind = rockchip_mipi_dsi_bind,
+ .unbind = rockchip_mipi_dsi_unbind,
+};
+
+static int rockchip_mipi_dsi_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &rockchip_mipi_dsi_ops);
+}
+
+static int rockchip_mipi_dsi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &rockchip_mipi_dsi_ops);
+ return 0;
+}
+
+static struct platform_driver rockchip_mipi_dsi_driver = {
+ .probe = rockchip_mipi_dsi_probe,
+ .remove = rockchip_mipi_dsi_remove,
+ .driver = {
+ .of_match_table = rockchip_mipi_dsi_dt_ids,
+ .name = DRIVER_NAME,
+ },
+};
+module_platform_driver(rockchip_mipi_dsi_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index eff545b..bfaa31a 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1199,6 +1199,9 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
case DRM_MODE_CONNECTOR_HDMIA:
VOP_CTRL_SET(vop, hdmi_en, 1);
break;
+ case DRM_MODE_CONNECTOR_DSI:
+ VOP_CTRL_SET(vop, mipi_en, 1);
+ break;
default:
DRM_ERROR("unsupport connector_type[%d]\n",
vop->connector_type);
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
Add support for Synopsys DesignWare MIPI DSI host controller which is
embedded in the rk3288 SoCs.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c | 249 ++++++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 3 +
4 files changed, 263 insertions(+)
create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
index 35215f6..24395f3 100644
--- a/drivers/gpu/drm/rockchip/Kconfig
+++ b/drivers/gpu/drm/rockchip/Kconfig
@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
for the Synopsys DesignWare HDMI driver. If you want to
enable HDMI on RK3288 based SoC, you should selet this
option.
+
+config ROCKCHIP_DW_MIPI_DSI
+ bool "Rockchip specific extensions for Synopsys DW MIPI DSI"
+ depends on DRM_ROCKCHIP
+ select DRM_DW_MIPI_DSI
+ help
+ This selects support for Rockchip SoC specific extensions
+ for the Synopsys DesignWare HDMI driver. If you want to
+ enable MIPI DSI on RK3288 based SoC, you should selet this
+ option.
diff --git a/drivers/gpu/drm/rockchip/Makefile b/drivers/gpu/drm/rockchip/Makefile
index f3d8a19..6a97059 100644
--- a/drivers/gpu/drm/rockchip/Makefile
+++ b/drivers/gpu/drm/rockchip/Makefile
@@ -6,5 +6,6 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
rockchip_drm_gem.o
obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw_mipi_dsi_rockchip.o
obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o
diff --git a/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
new file mode 100644
index 0000000..a0bb4eb
--- /dev/null
+++ b/drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/component.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/videodev2.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_of.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+
+#define DRIVER_NAME "rockchip-mipi-dsi"
+
+#define GRF_SOC_CON6 0x025c
+#define DSI0_SEL_VOP_LIT (1 << 6)
+#define DSI1_SEL_VOP_LIT (1 << 9)
+
+struct rockchip_mipi_dsi {
+ struct drm_encoder encoder;
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+static inline struct rockchip_mipi_dsi *enc_to_dsi(struct drm_encoder *enc)
+{
+ return container_of(enc, struct rockchip_mipi_dsi, encoder);
+}
+
+static struct drm_encoder_funcs rockchip_mipi_dsi_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static int rockchip_mipi_parse_dt(struct rockchip_mipi_dsi *dsi)
+{
+ struct device_node *np = dsi->dev->of_node;
+
+ dsi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+ if (IS_ERR(dsi->regmap)) {
+ dev_err(dsi->dev, "Unable to get rockchip,grf\n");
+ return PTR_ERR(dsi->regmap);
+ }
+
+ return 0;
+}
+
+static bool rockchip_mipi_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ return true;
+}
+
+static void rockchip_mipi_dsi_encoder_prepare(struct drm_encoder *encoder)
+{
+ u32 encoder_pix_fmt, interface_pix_fmt;
+
+ encoder_pix_fmt = dw_mipi_dsi_get_encoder_pixel_format(encoder);
+
+ switch (encoder_pix_fmt) {
+ case MIPI_DSI_FMT_RGB888:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P888;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P666;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ interface_pix_fmt = ROCKCHIP_OUT_MODE_P565;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+
+ rockchip_drm_crtc_mode_config(encoder->crtc, DRM_MODE_CONNECTOR_DSI,
+ interface_pix_fmt);
+}
+
+static void rockchip_mipi_dsi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+}
+
+static void rockchip_mipi_dsi_encoder_commit(struct drm_encoder *encoder)
+{
+ struct rockchip_mipi_dsi *dsi = enc_to_dsi(encoder);
+ u32 val;
+ int mux = rockchip_drm_encoder_get_mux_id(dsi->dev->of_node, encoder);
+
+ if (mux)
+ val = DSI0_SEL_VOP_LIT | (DSI0_SEL_VOP_LIT << 16);
+ else
+ val = DSI0_SEL_VOP_LIT << 16;
+
+ regmap_write(dsi->regmap, GRF_SOC_CON6, val);
+ dev_dbg(dsi->dev, "vop %s output to dsi0\n",
+ (mux) ? "LIT" : "BIG");
+}
+
+static void rockchip_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
+{
+}
+
+static struct drm_encoder_helper_funcs
+rockchip_mipi_dsi_encoder_helper_funcs = {
+ .mode_fixup = rockchip_mipi_dsi_encoder_mode_fixup,
+ .prepare = rockchip_mipi_dsi_encoder_prepare,
+ .mode_set = rockchip_mipi_dsi_encoder_mode_set,
+ .commit = rockchip_mipi_dsi_encoder_commit,
+ .disable = rockchip_mipi_dsi_encoder_disable,
+};
+
+static int rockchip_mipi_dsi_register(struct drm_device *drm,
+ struct rockchip_mipi_dsi *dsi)
+{
+ struct drm_encoder *encoder = &dsi->encoder;
+ struct device *dev = dsi->dev;
+
+ encoder->possible_crtcs = drm_of_find_possible_crtcs(drm,
+ dev->of_node);
+ /*
+ * If we failed to find the CRTC(s) which this encoder is
+ * supposed to be connected to, it's because the CRTC has
+ * not been registered yet. Defer probing, and hope that
+ * the required CRTC is added later.
+ */
+ if (encoder->possible_crtcs == 0)
+ return -EPROBE_DEFER;
+
+ drm_encoder_helper_add(&dsi->encoder,
+ &rockchip_mipi_dsi_encoder_helper_funcs);
+ drm_encoder_init(drm, &dsi->encoder, &rockchip_mipi_dsi_encoder_funcs,
+ DRM_MODE_ENCODER_DSI);
+ return 0;
+}
+
+static enum drm_mode_status rockchip_mipi_dsi_mode_valid(
+ struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ /*
+ * The VID_PKT_SIZE field in the DSI_VID_PKT_CFG
+ * register is 11-bit.
+ */
+ if (mode->hdisplay > 0x7ff)
+ return MODE_BAD_HVALUE;
+
+ /*
+ * The V_ACTIVE_LINES field in the DSI_VTIMING_CFG
+ * register is 11-bit.
+ */
+ if (mode->vdisplay > 0x7ff)
+ return MODE_BAD_VVALUE;
+
+ return MODE_OK;
+}
+
+static struct dw_mipi_dsi_plat_data rk3288_mipi_dsi_drv_data = {
+ .max_data_lanes = 4,
+ .mode_valid = rockchip_mipi_dsi_mode_valid,
+};
+
+static const struct of_device_id rockchip_mipi_dsi_dt_ids[] = {
+ {
+ .compatible = "rockchip,rk3288-mipi-dsi",
+ .data = &rk3288_mipi_dsi_drv_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rockchip_mipi_dsi_dt_ids);
+
+static int rockchip_mipi_dsi_bind(struct device *dev, struct device *master,
+ void *data)
+{
+ const struct of_device_id *of_id =
+ of_match_device(rockchip_mipi_dsi_dt_ids, dev);
+ const struct dw_mipi_dsi_plat_data *pdata = of_id->data;
+ struct drm_device *drm = data;
+ struct rockchip_mipi_dsi *dsi;
+ int ret;
+
+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+ if (!dsi)
+ return -ENOMEM;
+
+ dsi->dev = dev;
+
+ ret = rockchip_mipi_dsi_register(drm, dsi);
+ if (ret)
+ return ret;
+
+ ret = rockchip_mipi_parse_dt(dsi);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(dev, dsi);
+
+ return dw_mipi_dsi_bind(dev, master, data, &dsi->encoder, pdata);
+}
+
+static void rockchip_mipi_dsi_unbind(struct device *dev, struct device *master,
+ void *data)
+{
+ return dw_mipi_dsi_unbind(dev, master, data);
+}
+
+static const struct component_ops rockchip_mipi_dsi_ops = {
+ .bind = rockchip_mipi_dsi_bind,
+ .unbind = rockchip_mipi_dsi_unbind,
+};
+
+static int rockchip_mipi_dsi_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &rockchip_mipi_dsi_ops);
+}
+
+static int rockchip_mipi_dsi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &rockchip_mipi_dsi_ops);
+ return 0;
+}
+
+static struct platform_driver rockchip_mipi_dsi_driver = {
+ .probe = rockchip_mipi_dsi_probe,
+ .remove = rockchip_mipi_dsi_remove,
+ .driver = {
+ .of_match_table = rockchip_mipi_dsi_dt_ids,
+ .name = DRIVER_NAME,
+ },
+};
+module_platform_driver(rockchip_mipi_dsi_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP MIPI DSI host controller driver");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index eff545b..bfaa31a 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1199,6 +1199,9 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
case DRM_MODE_CONNECTOR_HDMIA:
VOP_CTRL_SET(vop, hdmi_en, 1);
break;
+ case DRM_MODE_CONNECTOR_DSI:
+ VOP_CTRL_SET(vop, mipi_en, 1);
+ break;
default:
DRM_ERROR("unsupport connector_type[%d]\n",
vop->connector_type);
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
devicetree, linux-arm-kernel, linux-kernel
add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3:
move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
Changes in v2: None
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 56 ++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..acd9ec9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,56 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [1].
+ For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+For more required properties, please refer to [2].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+[2] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+
+Example:
+ mipi_dsi: mipi@ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+ };
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, linux-kernel,
dri-devel, Rob Herring, Kumar Gala, Chris Zhong, rmk+kernel,
ajaykumar.rs, linux-arm-kernel
add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3:
move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
Changes in v2: None
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 56 ++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..acd9ec9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,56 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [1].
+ For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+For more required properties, please refer to [2].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+[2] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+
+Example:
+ mipi_dsi: mipi@ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+ };
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3:
move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
Changes in v2: None
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 56 ++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..acd9ec9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,56 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [1].
+ For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+For more required properties, please refer to [2].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+[2] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+
+Example:
+ mipi_dsi: mipi at ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+ };
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, linux-arm-kernel, devicetree, linux-kernel
Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
reg = <0>;
remote-endpoint = <&hdmi_in_vopb>;
};
+ vopb_out_mipi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopb>;
+ };
};
};
@@ -831,6 +835,10 @@
reg = <0>;
remote-endpoint = <&hdmi_in_vopl>;
};
+ vopl_out_mipi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopl>;
+ };
};
};
@@ -871,6 +879,37 @@
};
};
+ mipi_dsi: mipi@ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Russell King, Pawel Moll, Ian Campbell,
linux-kernel, dri-devel, Rob Herring, Kumar Gala, Chris Zhong,
rmk+kernel, ajaykumar.rs, linux-arm-kernel
Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
reg = <0>;
remote-endpoint = <&hdmi_in_vopb>;
};
+ vopb_out_mipi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopb>;
+ };
};
};
@@ -831,6 +835,10 @@
reg = <0>;
remote-endpoint = <&hdmi_in_vopl>;
};
+ vopl_out_mipi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopl>;
+ };
};
};
@@ -871,6 +879,37 @@
};
};
+ mipi_dsi: mipi@ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
reg = <0>;
remote-endpoint = <&hdmi_in_vopb>;
};
+ vopb_out_mipi: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopb>;
+ };
};
};
@@ -831,6 +835,10 @@
reg = <0>;
remote-endpoint = <&hdmi_in_vopl>;
};
+ vopl_out_mipi: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&mipi_in_vopl>;
+ };
};
};
@@ -871,6 +879,37 @@
};
};
+ mipi_dsi: mipi at ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+ };
+
gic: interrupt-controller at ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 10/13] of: add vendor prefix for boe
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Arnd Bergmann, Jonathan Cameron, Dmitry Torokhov, Arnaud Ebalard,
Kuninori Morimoto, devicetree, linux-kernel
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..0f88d6f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
+boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 10/13] of: add vendor prefix for boe
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Kuninori Morimoto, Arnaud Ebalard,
Arnd Bergmann, Pawel Moll, Ian Campbell, Dmitry Torokhov,
linux-kernel, dri-devel, Rob Herring, Kumar Gala, Chris Zhong,
rmk+kernel, ajaykumar.rs, Jonathan Cameron
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 55df1d4..0f88d6f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
+boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Thierry Reding, linux-kernel
This adds support for the BOE TV080WUM-NL0 1200x1920 mipi panel to the
DRM simple panel driver.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
Alphabetically arranged the name
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f97b73e..e3ac2de 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1263,6 +1263,36 @@ static const struct panel_desc_dsi auo_b080uan01 = {
.lanes = 4,
};
+static const struct drm_display_mode boe_tv080wum_nl0_mode = {
+ .clock = 160000,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 120,
+ .hsync_end = 1200 + 120 + 20,
+ .htotal = 1200 + 120 + 20 + 21,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 21,
+ .vsync_end = 1920 + 21 + 3,
+ .vtotal = 1920 + 21 + 3 + 18,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc_dsi boe_tv080wum_nl0 = {
+ .desc = {
+ .modes = &boe_tv080wum_nl0_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 107,
+ .height = 172,
+ },
+ },
+ .flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+ .format = MIPI_DSI_FMT_RGB888,
+ .lanes = 4,
+};
+
static const struct drm_display_mode lg_ld070wx3_sl01_mode = {
.clock = 71000,
.hdisplay = 800,
@@ -1348,11 +1378,15 @@ static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
.lanes = 4,
};
+
static const struct of_device_id dsi_of_match[] = {
{
.compatible = "auo,b080uan01",
.data = &auo_b080uan01
}, {
+ .compatible = "boe,tv080wum-nl0",
+ .data = &boe_tv080wum_nl0
+ }, {
.compatible = "lg,ld070wx3-sl01",
.data = &lg_ld070wx3_sl01
}, {
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: linux-kernel, dri-devel, Chris Zhong, rmk+kernel, ajaykumar.rs
This adds support for the BOE TV080WUM-NL0 1200x1920 mipi panel to the
DRM simple panel driver.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4:
Alphabetically arranged the name
Changes in v3: None
Changes in v2: None
drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index f97b73e..e3ac2de 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1263,6 +1263,36 @@ static const struct panel_desc_dsi auo_b080uan01 = {
.lanes = 4,
};
+static const struct drm_display_mode boe_tv080wum_nl0_mode = {
+ .clock = 160000,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 120,
+ .hsync_end = 1200 + 120 + 20,
+ .htotal = 1200 + 120 + 20 + 21,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 21,
+ .vsync_end = 1920 + 21 + 3,
+ .vtotal = 1920 + 21 + 3 + 18,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc_dsi boe_tv080wum_nl0 = {
+ .desc = {
+ .modes = &boe_tv080wum_nl0_mode,
+ .num_modes = 1,
+ .size = {
+ .width = 107,
+ .height = 172,
+ },
+ },
+ .flags = MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE,
+ .format = MIPI_DSI_FMT_RGB888,
+ .lanes = 4,
+};
+
static const struct drm_display_mode lg_ld070wx3_sl01_mode = {
.clock = 71000,
.hdisplay = 800,
@@ -1348,11 +1378,15 @@ static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
.lanes = 4,
};
+
static const struct of_device_id dsi_of_match[] = {
{
.compatible = "auo,b080uan01",
.data = &auo_b080uan01
}, {
+ .compatible = "boe,tv080wum-nl0",
+ .data = &boe_tv080wum_nl0
+ }, {
.compatible = "lg,ld070wx3-sl01",
.data = &lg_ld070wx3_sl01
}, {
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 12/13] drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree binding
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Thierry Reding, Rob Herring, Pawel Moll, Mark Rutland,
Ian Campbell, Kumar Gala, devicetree, linux-kernel
This binding specifies a set of common properties for display panels. It
can be used as a basis by bindings for specific panels.
Bindings for three specific panels are provided to show how the
simple panel binding can be used.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3:
move boe,tv080wum-nl0.txt to bindings/display/panel/
Changes in v2:
As Thierry.Reding comment, add a documentation for this panel.
.../devicetree/bindings/display/panel/boe,tv080wum-nl0.txt | 7 +++++++
1 file changed, 7 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 0000000..50be5e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 12/13] drm/panel: simple: Add boe, tv080wum-nl0 simple panel device tree binding
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell, linux-kernel,
dri-devel, Rob Herring, Kumar Gala, Chris Zhong, rmk+kernel,
ajaykumar.rs
This binding specifies a set of common properties for display panels. It
can be used as a basis by bindings for specific panels.
Bindings for three specific panels are provided to show how the
simple panel binding can be used.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v4: None
Changes in v3:
move boe,tv080wum-nl0.txt to bindings/display/panel/
Changes in v2:
As Thierry.Reding comment, add a documentation for this panel.
.../devicetree/bindings/display/panel/boe,tv080wum-nl0.txt | 7 +++++++
1 file changed, 7 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 0000000..50be5e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:15 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, Chris Zhong,
Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala,
Russell King, linux-arm-kernel, devicetree, linux-kernel
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..d04878f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
reg = <0x0 0x80000000>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
@@ -177,6 +177,21 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -247,6 +262,9 @@
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
buttons {
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov
Cc: Mark Rutland, devicetree, Russell King, Pawel Moll, Ian Campbell,
linux-kernel, dri-devel, Rob Herring, Kumar Gala, Chris Zhong,
rmk+kernel, ajaykumar.rs, linux-arm-kernel
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..d04878f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
reg = <0x0 0x80000000>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
@@ -177,6 +177,21 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -247,6 +262,9 @@
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
buttons {
--
2.6.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 56+ messages in thread
* [PATCH v4 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb
@ 2015-11-20 8:15 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-20 8:15 UTC (permalink / raw)
To: linux-arm-kernel
This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..d04878f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
reg = <0x0 0x80000000>;
};
- backlight {
+ backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <
0 1 2 3 4 5 6 7
@@ -177,6 +177,21 @@
status = "okay";
};
+&mipi_dsi {
+ status = "okay";
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -247,6 +262,9 @@
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ lcd_en: lcd-en {
+ rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
buttons {
--
2.6.3
^ permalink raw reply related [flat|nested] 56+ messages in thread
* Re: [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode
2015-11-20 8:15 ` Chris Zhong
(?)
@ 2015-11-20 8:57 ` Mark yao
-1 siblings, 0 replies; 56+ messages in thread
From: Mark yao @ 2015-11-20 8:57 UTC (permalink / raw)
To: Chris Zhong, heiko, linux-rockchip, treding, emil.l.velikov
Cc: airlied, ajaykumar.rs, rmk+kernel, dri-devel, linux-arm-kernel,
linux-kernel
On 2015年11月20日 16:15, Chris Zhong wrote:
> Since the mipi dsi driver need to use the clock of vop to make the
> calculation of Blanking. But sometimes the clock driver can not set a
> accurate clock_rate for vop, get it by clk_round_rate before mode_set,
> so we can get the true value.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4:
> use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 5d8ae5e..eff545b 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -1136,9 +1136,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
> const struct drm_display_mode *mode,
> struct drm_display_mode *adjusted_mode)
> {
> + struct vop *vop = to_vop(crtc);
> +
> if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
> return false;
>
> + adjusted_mode->clock =
> + clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
> +
> return true;
> }
>
Looks good for me, so
Acked-by: Mark Yao <mark.yao@rock-chips.com>
--
Ｍark Yao
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode
@ 2015-11-20 8:57 ` Mark yao
0 siblings, 0 replies; 56+ messages in thread
From: Mark yao @ 2015-11-20 8:57 UTC (permalink / raw)
To: Chris Zhong, heiko, linux-rockchip, treding, emil.l.velikov
Cc: linux-kernel, dri-devel, rmk+kernel, ajaykumar.rs, linux-arm-kernel
On 2015年11月20日 16:15, Chris Zhong wrote:
> Since the mipi dsi driver need to use the clock of vop to make the
> calculation of Blanking. But sometimes the clock driver can not set a
> accurate clock_rate for vop, get it by clk_round_rate before mode_set,
> so we can get the true value.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4:
> use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 5d8ae5e..eff545b 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -1136,9 +1136,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
> const struct drm_display_mode *mode,
> struct drm_display_mode *adjusted_mode)
> {
> + struct vop *vop = to_vop(crtc);
> +
> if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
> return false;
>
> + adjusted_mode->clock =
> + clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
> +
> return true;
> }
>
Looks good for me, so
Acked-by: Mark Yao <mark.yao@rock-chips.com>
--
Ｍark Yao
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode
@ 2015-11-20 8:57 ` Mark yao
0 siblings, 0 replies; 56+ messages in thread
From: Mark yao @ 2015-11-20 8:57 UTC (permalink / raw)
To: linux-arm-kernel
On 2015?11?20? 16:15, Chris Zhong wrote:
> Since the mipi dsi driver need to use the clock of vop to make the
> calculation of Blanking. But sometimes the clock driver can not set a
> accurate clock_rate for vop, get it by clk_round_rate before mode_set,
> so we can get the true value.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4:
> use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> index 5d8ae5e..eff545b 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
> @@ -1136,9 +1136,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
> const struct drm_display_mode *mode,
> struct drm_display_mode *adjusted_mode)
> {
> + struct vop *vop = to_vop(crtc);
> +
> if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
> return false;
>
> + adjusted_mode->clock =
> + clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
> +
> return true;
> }
>
Looks good for me, so
Acked-by: Mark Yao <mark.yao@rock-chips.com>
--
?ark Yao
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 14:32 ` Rob Herring
-1 siblings, 0 replies; 56+ messages in thread
From: Rob Herring @ 2015-11-20 14:32 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, treding, emil.l.velikov,
Mark Rutland, devicetree, Pawel Moll, Ian Campbell, linux-kernel,
dri-devel, Kumar Gala, rmk+kernel, ajaykumar.rs
On Fri, Nov 20, 2015 at 04:15:31PM +0800, Chris Zhong wrote:
> From: Liu Ying <Ying.liu@freescale.com>
>
> This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
> host controller DRM bridge driver.
>
> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
One nit, but:
Acked-by: Rob Herring <robh@kernel.org>
> Changes in v4:
> remove gpr property from example, since it is noused now.
> add the description about ports
[...]
> +example:
> + gpr: iomuxc-gpr@020e0000 {
> + /* ... */
> + };
This is still lingering.
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver
@ 2015-11-20 14:32 ` Rob Herring
0 siblings, 0 replies; 56+ messages in thread
From: Rob Herring @ 2015-11-20 14:32 UTC (permalink / raw)
To: Chris Zhong
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell,
emil.l.velikov, linux-kernel, dri-devel, linux-rockchip,
Kumar Gala, rmk+kernel, treding, ajaykumar.rs
On Fri, Nov 20, 2015 at 04:15:31PM +0800, Chris Zhong wrote:
> From: Liu Ying <Ying.liu@freescale.com>
>
> This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
> host controller DRM bridge driver.
>
> Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
One nit, but:
Acked-by: Rob Herring <robh@kernel.org>
> Changes in v4:
> remove gpr property from example, since it is noused now.
> add the description about ports
[...]
> +example:
> + gpr: iomuxc-gpr@020e0000 {
> + /* ... */
> + };
This is still lingering.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-20 16:07 ` Thierry Reding
-1 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-20 16:07 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Inki Dae, Takashi Iwai,
Vincent Palatin, Andy Yan, Rahul Sharma, Sean Paul,
Andrew Bresticker, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 17628 bytes --]
On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
> add Synopsys DesignWare MIPI DSI host controller driver support.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
>
> Changes in v4:
> eliminate some warnning
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/bridge/Kconfig | 11 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
> include/drm/bridge/dw_mipi_dsi.h | 27 +
> 4 files changed, 1095 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 6dddd39..c0900e0 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -22,6 +22,17 @@ config DRM_DW_HDMI_AHB_AUDIO
> Designware HDMI block. This is used in conjunction with
> the i.MX6 HDMI driver.
>
> +config DRM_DW_MIPI_DSI
> + tristate "Synopsys DesignWare MIPI DSI host controller bridge"
> + depends on DRM
> + select DRM_KMS_HELPER
> + select DRM_MIPI_DSI
> + select DRM_PANEL
> + help
> + Choose this if you want to use the Synopsys DesignWare MIPI DSI host
> + controller bridge. If M is selected, the module will be
> + called dw_mipi_dsi. DRM_MIPI_DSI support is required for this driver
> + to work.
Just drop the last sentence, it doesn't add value since that's already
expressed in the "select DRM_MIPI_DSI" statement.
Also, please use hyphens instead of underscore to separate parts in
module names.
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index d4e28be..d908c4b 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -2,5 +2,6 @@ ccflags-y := -Iinclude/drm
>
> obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
> obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw_mipi_dsi.o
Like I said above, this should be dw-mipi-dsi.o. I know dw_hdmi uses the
underscores, but that's something I plan on fixing.
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> diff --git a/drivers/gpu/drm/bridge/dw_mipi_dsi.c b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
> new file mode 100644
> index 0000000..23b612d
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
> @@ -0,0 +1,1056 @@
> +/*
> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
Does this need to be updated? We're pretty far into 2015 by now.
> +struct dw_mipi_dsi {
> + struct mipi_dsi_host dsi_host;
> + struct drm_connector connector;
> + struct drm_encoder *encoder;
struct drm_bridge already has a pointer to an encoder, can't you reuse
that instead?
> + struct drm_bridge *bridge;
Typically you'd embed the bridge into the driver structure.
> + struct drm_panel *panel;
> + struct device *dev;
> +
> + void __iomem *base;
> +
> + struct clk *pllref_clk;
> + struct clk *cfg_clk;
> + struct clk *pclk;
> +
> + unsigned int lane_mbps; /* per lane */
> + u32 channel;
> + u32 lanes;
> + u32 format;
> + u16 input_div;
> + u16 feedback_div;
> + struct drm_display_mode *mode;
> +
> + const struct dw_mipi_dsi_plat_data *pdata;
> +
> + bool enabled;
> +};
> +
> +enum {
> + STATUS_TO_CLEAR,
> + STATUS_TO_SET,
> +};
This seems to be used only as replacement for false/true, so you should
just use false/true instead and remove these.
> +/* The table is based on 27MHz DPHY pll reference clock. */
> +static const struct dphy_pll_testdin_map dptdin_map[] = {
> + {90, 0x00}, {100, 0x10}, {110, 0x20}, {130, 0x01},
> + {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
> + {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
> + {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
> + {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
> + {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
> + {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
> + {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
> + {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
> + {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
> +};
Might be worth reformatting this to be more table-like.
> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> +{
> + writel(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> +{
> + return readl(dsi->base + reg);
> +}
> +
> +static inline void dsi_modify(struct dw_mipi_dsi *dsi, u32 reg,
> + u32 mask, u32 val)
> +{
> + u32 v;
> +
> + v = readl(dsi->base + reg);
> + v &= ~mask;
> + v |= val;
> + writel(v, dsi->base + reg);
> +}
Perhaps reuse dsi_read() and dsi_write() here?
> +static int check_status(struct dw_mipi_dsi *dsi, u32 reg, u32 status,
> + unsigned int timeout, bool to_set)
> +{
> + unsigned long expire;
> + bool out;
> + u32 val;
> +
> + expire = jiffies + msecs_to_jiffies(timeout);
> + for (;;) {
> + val = dsi_read(dsi, reg);
> + out = to_set ? ((val & status) == status) : !(val & status);
> + if (out)
> + break;
> +
> + if (time_after(jiffies, expire))
> + return -ETIMEDOUT;
> +
> + cpu_relax();
> + }
> +
> + return 0;
> +}
Perhaps use the helpers in linux/iopoll.h?
> +/*
> + * The controller should generate 2 frames before
> + * preparing the peripheral.
> + */
> +static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
> +{
> + unsigned long expire;
> + int refresh, two_frames;
> +
> + refresh = drm_mode_vrefresh(dsi->mode);
> + two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> +
> + expire = jiffies + msecs_to_jiffies(two_frames);
> + while (time_before(jiffies, expire))
> + cpu_relax();
> +}
That's kind of rude. You know already how long it will take for two
frames to be sent, why not just sleep for that time? usleep_range() or
in this case most likely msleep() would be more civil options.
> +static void dw_mipi_dsi_phy_test(struct dw_mipi_dsi *dsi, u8 test_code,
> + u8 test_data)
> +{
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
> + PHY_TESTDIN(test_code));
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> + PHY_TESTDIN(test_data));
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +}
This looks like it's actually programming something, rather than
testing. Can you perhaps add a comment to this explaining what exactly
it's doing?
> +static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
> +{
> + int ret, testdin, vco;
> +
> + vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
> +
> + testdin = max_mbps_to_testdin(dsi->lane_mbps);
> + if (testdin < 0) {
> + dev_err(dsi->dev,
> + "failed to get testdin for %dmbps lane clock\n",
> + dsi->lane_mbps);
> + return testdin;
> + }
> +
> + dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x10, 0x80 | (vco & 0x7) << 3 | 0x3);
> + dw_mipi_dsi_phy_test(dsi, 0x11, 0x8);
> + dw_mipi_dsi_phy_test(dsi, 0x12, 0xc0);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x44, testdin << 1);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x17, dsi->input_div - 1);
> + dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) & 0x1f);
> + dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) >> 5 | 0x80);
> + dw_mipi_dsi_phy_test(dsi, 0x19, 0x30);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x20, 0x4d);
> + dw_mipi_dsi_phy_test(dsi, 0x21, 0x3d);
> + dw_mipi_dsi_phy_test(dsi, 0x21, 0xdf);
> + dw_mipi_dsi_phy_test(dsi, 0x22, 0x7);
> + dw_mipi_dsi_phy_test(dsi, 0x22, 0x87);
> + dw_mipi_dsi_phy_test(dsi, 0x70, 0x80 | 0xf);
> + dw_mipi_dsi_phy_test(dsi, 0x71, 0x80 | 0x55);
> + dw_mipi_dsi_phy_test(dsi, 0x72, 0x40 | 0xa);
Can we have symbolic names for these values?
> + dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK
> + | PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
I think it's more conventional to put the | on the first line. I also
think it'd be more readable to align PHY_UNRSTZ | PHY_UNSHUTDOWNZ with
the other values that form this parameter, like so:
dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> +static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
> +{
> + int bpp, i;
i should be unsigned int.
> + unsigned int max_mbps = 0, target_mbps = 1000;
> + unsigned long mpclk, pllref, tmp;
> + int m = 1, n = 1, pre;
These can be unsigned int as well.
> +
> + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
> + if (max_mbps < dptdin_map[i].max_mbps)
> + max_mbps = dptdin_map[i].max_mbps;
> + }
Looks to me like this will always be 1500. Why go through the trouble of
looking up the value if you know that the table is sorted by increasing
max_mbps? Hard-coding to 1500 isn't very nice either, but you could do
something like:
max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps;
> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> + struct mipi_dsi_device *device)
> +{
> + struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> + if (device->lanes > dsi->pdata->max_data_lanes) {
> + dev_err(dsi->dev, "the number of data lanes(%d) is too many\n",
Use %u for unsigned integers.
> + device->lanes);
> + return -EINVAL;
> + }
> +
> + if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
> + !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
> + dev_err(dsi->dev, "device mode is unsupported\n");
> + return -EINVAL;
> + }
> +
> + dsi->lanes = device->lanes;
> + dsi->channel = device->channel;
> + dsi->format = device->format;
> + dsi->panel = of_drm_find_panel(device->dev.of_node);
You might want to check this for validity?
> + drm_panel_attach(dsi->panel, &dsi->connector);
You should check for errors here.
> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> + const struct mipi_dsi_msg *msg)
> +{
> + const u16 *tx_buf = msg->tx_buf;
> + u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
> +
> + if (msg->tx_len > 2) {
> + dev_err(dsi->dev, "too long tx buf length %d for short write\n",
> + (int)msg->tx_len);
No need to cast here. Simply use %zu as the format specifier.
> + return -EINVAL;
> + }
> +
> + return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> +}
> +
> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> + const struct mipi_dsi_msg *msg)
> +{
> + const u32 *tx_buf = msg->tx_buf;
> + int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
> + u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> + u32 remainder = 0;
> +
> + if (msg->tx_len < 3) {
> + dev_err(dsi->dev, "wrong tx buf length %d for long write\n",
> + (int)msg->tx_len);
Same here.
> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> + struct dw_mipi_dsi *dsi = bridge->driver_private;
> +
> + if (dsi->enabled)
> + return;
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_prepare_enable(dsi->cfg_clk);
> +
> + clk_prepare_enable(dsi->pclk);
Please always error-check clk_prepare() and clk_enable() (or the
combination clk_prepare_enable()). They can fail.
> + dw_mipi_dsi_phy_init(dsi);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> + dw_mipi_dsi_wait_for_two_frames(dsi);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + drm_panel_prepare(dsi->panel);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> + clk_disable_unprepare(dsi->pclk);
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_disable_unprepare(dsi->cfg_clk);
> +
> + drm_panel_enable(dsi->panel);
> +
> + dsi->enabled = true;
> +}
> +
> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> + struct dw_mipi_dsi *dsi = bridge->driver_private;
> + unsigned long expire;
> +
> + if (!dsi->enabled)
> + return;
> +
> + drm_panel_disable(dsi->panel);
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_prepare_enable(dsi->cfg_clk);
> +
> + clk_prepare_enable(dsi->pclk);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + drm_panel_unprepare(dsi->panel);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +
> + /*
> + * This is necessary to make sure the peripheral
> + * will be driven normally when the display is
> + * enabled again later.
> + */
You can use longer lines for comments. No need to split it across three
lines if you can make it fit on two.
> + expire = jiffies + msecs_to_jiffies(120);
> + while (time_before(jiffies, expire))
> + cpu_relax();
Again, cpu_relax() isn't really relaxing the CPU to the extent that it
might lead you to think. If you know you want to sleep for 120 ms, just
do msleep(120).
> +
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + dw_mipi_dsi_disable(dsi);
> + clk_disable_unprepare(dsi->pclk);
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_disable_unprepare(dsi->cfg_clk);
> +
> + dsi->enabled = false;
> +}
> +
> +static void dw_mipi_dsi_bridge_nope(struct drm_bridge *bridge)
Hehe, perhaps dw_mipi_dsi_bridge_nop()? Or simply leave the function
pointers NULL, but I guess you had to add this because the DRM bridge
infrastructure doesn't allow these to be optional. We might want to
change that.
> +{
> + /* do nothing */
> +}
> +
> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> +{
> + dsi_write(dsi, DSI_PWR_UP, RESET);
> + dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> + | PHY_RSTZ | PHY_SHUTDOWNZ);
> + dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> + TX_ESC_CLK_DIVIDSION(7));
> + dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +}
> +
> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> + struct drm_display_mode *mode)
> +{
> + u32 val = 0, calor = 0;
"color"?
> +static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct dw_mipi_dsi *dsi = bridge->driver_private;
> + int ret;
> +
> + dsi->mode = adjusted_mode;
> +
> + ret = dw_mipi_dsi_get_lane_bps(dsi);
> + if (ret < 0)
> + return;
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_prepare_enable(dsi->cfg_clk);
> +
> + clk_prepare_enable(dsi->pclk);
Again, check errors from clk_prepare_enable(), ...
> + dw_mipi_dsi_init(dsi);
> + dw_mipi_dsi_dpi_config(dsi, mode);
> + dw_mipi_dsi_packet_handler_config(dsi);
> + dw_mipi_dsi_video_mode_config(dsi);
> + dw_mipi_dsi_video_packet_config(dsi, mode);
> + dw_mipi_dsi_command_mode_config(dsi);
> + dw_mipi_dsi_line_timer_config(dsi);
> + dw_mipi_dsi_vertical_timing_config(dsi);
> + dw_mipi_dsi_dphy_timing_config(dsi);
> + dw_mipi_dsi_dphy_interface_config(dsi);
> + dw_mipi_dsi_clear_err(dsi);
> + dw_mipi_dsi_phy_init(dsi);
> + dw_mipi_dsi_wait_for_two_frames(dsi);
> + drm_panel_prepare(dsi->panel);
... and drm_panel_prepare().
> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
static const, please.
> +int dw_mipi_dsi_bind(struct device *dev, struct device *master, void *data,
> + struct drm_encoder *encoder,
> + const struct dw_mipi_dsi_plat_data *pdata)
> +{
[...]
> + dsi->cfg_clk = devm_clk_get(dev, "cfg");
> + if (IS_ERR(dsi->cfg_clk))
> + dev_warn(dev, "Have no configuration clock\n");
Is this truly optional?
> + dsi->pclk = devm_clk_get(dev, "pclk");
> + if (IS_ERR(dsi->pclk)) {
> + ret = PTR_ERR(dsi->pclk);
> + dev_err(dev, "Unable to get configuration clock: %d\n", ret);
pclk doesn't seem to be a "configuration clock".
> + dev_info(dev, "version number is 0x%08x\n", val);
Do you really need this information? What purpose does it serve to have
this in the kernel log?
> diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h
> new file mode 100644
> index 0000000..2e351e4
> --- /dev/null
> +++ b/include/drm/bridge/dw_mipi_dsi.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + */
> +
> +#ifndef __DW_MIPI_DSI__
> +#define __DW_MIPI_DSI__
> +
> +#include <drm/drmP.h>
> +
> +struct dw_mipi_dsi_plat_data {
> + unsigned int max_data_lanes;
> + enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
> + struct drm_display_mode *mode);
> +};
> +
> +int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder);
> +
> +int dw_mipi_dsi_bind(struct device *dev, struct device *master,
> + void *data, struct drm_encoder *encoder,
> + const struct dw_mipi_dsi_plat_data *pdata);
> +void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data);
> +#endif /* __DW_MIPI_DSI__ */
Should have a blank line between the two above.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
@ 2015-11-20 16:07 ` Thierry Reding
0 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-20 16:07 UTC (permalink / raw)
To: Chris Zhong
Cc: Vincent Palatin, Andrew Bresticker, emil.l.velikov, linux-kernel,
dri-devel, linux-rockchip, Andy Yan, rmk+kernel, Rahul Sharma,
ajaykumar.rs
[-- Attachment #1.1: Type: text/plain, Size: 17628 bytes --]
On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
> add Synopsys DesignWare MIPI DSI host controller driver support.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
>
> Changes in v4:
> eliminate some warnning
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/bridge/Kconfig | 11 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
> include/drm/bridge/dw_mipi_dsi.h | 27 +
> 4 files changed, 1095 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 6dddd39..c0900e0 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -22,6 +22,17 @@ config DRM_DW_HDMI_AHB_AUDIO
> Designware HDMI block. This is used in conjunction with
> the i.MX6 HDMI driver.
>
> +config DRM_DW_MIPI_DSI
> + tristate "Synopsys DesignWare MIPI DSI host controller bridge"
> + depends on DRM
> + select DRM_KMS_HELPER
> + select DRM_MIPI_DSI
> + select DRM_PANEL
> + help
> + Choose this if you want to use the Synopsys DesignWare MIPI DSI host
> + controller bridge. If M is selected, the module will be
> + called dw_mipi_dsi. DRM_MIPI_DSI support is required for this driver
> + to work.
Just drop the last sentence, it doesn't add value since that's already
expressed in the "select DRM_MIPI_DSI" statement.
Also, please use hyphens instead of underscore to separate parts in
module names.
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index d4e28be..d908c4b 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -2,5 +2,6 @@ ccflags-y := -Iinclude/drm
>
> obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
> obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw_mipi_dsi.o
Like I said above, this should be dw-mipi-dsi.o. I know dw_hdmi uses the
underscores, but that's something I plan on fixing.
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> diff --git a/drivers/gpu/drm/bridge/dw_mipi_dsi.c b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
> new file mode 100644
> index 0000000..23b612d
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/dw_mipi_dsi.c
> @@ -0,0 +1,1056 @@
> +/*
> + * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
Does this need to be updated? We're pretty far into 2015 by now.
> +struct dw_mipi_dsi {
> + struct mipi_dsi_host dsi_host;
> + struct drm_connector connector;
> + struct drm_encoder *encoder;
struct drm_bridge already has a pointer to an encoder, can't you reuse
that instead?
> + struct drm_bridge *bridge;
Typically you'd embed the bridge into the driver structure.
> + struct drm_panel *panel;
> + struct device *dev;
> +
> + void __iomem *base;
> +
> + struct clk *pllref_clk;
> + struct clk *cfg_clk;
> + struct clk *pclk;
> +
> + unsigned int lane_mbps; /* per lane */
> + u32 channel;
> + u32 lanes;
> + u32 format;
> + u16 input_div;
> + u16 feedback_div;
> + struct drm_display_mode *mode;
> +
> + const struct dw_mipi_dsi_plat_data *pdata;
> +
> + bool enabled;
> +};
> +
> +enum {
> + STATUS_TO_CLEAR,
> + STATUS_TO_SET,
> +};
This seems to be used only as replacement for false/true, so you should
just use false/true instead and remove these.
> +/* The table is based on 27MHz DPHY pll reference clock. */
> +static const struct dphy_pll_testdin_map dptdin_map[] = {
> + {90, 0x00}, {100, 0x10}, {110, 0x20}, {130, 0x01},
> + {140, 0x11}, {150, 0x21}, {170, 0x02}, {180, 0x12},
> + {200, 0x22}, {220, 0x03}, {240, 0x13}, {250, 0x23},
> + {270, 0x04}, {300, 0x14}, {330, 0x05}, {360, 0x15},
> + {400, 0x25}, {450, 0x06}, {500, 0x16}, {550, 0x07},
> + {600, 0x17}, {650, 0x08}, {700, 0x18}, {750, 0x09},
> + {800, 0x19}, {850, 0x29}, {900, 0x39}, {950, 0x0a},
> + {1000, 0x1a}, {1050, 0x2a}, {1100, 0x3a}, {1150, 0x0b},
> + {1200, 0x1b}, {1250, 0x2b}, {1300, 0x3b}, {1350, 0x0c},
> + {1400, 0x1c}, {1450, 0x2c}, {1500, 0x3c}
> +};
Might be worth reformatting this to be more table-like.
> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> +{
> + writel(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> +{
> + return readl(dsi->base + reg);
> +}
> +
> +static inline void dsi_modify(struct dw_mipi_dsi *dsi, u32 reg,
> + u32 mask, u32 val)
> +{
> + u32 v;
> +
> + v = readl(dsi->base + reg);
> + v &= ~mask;
> + v |= val;
> + writel(v, dsi->base + reg);
> +}
Perhaps reuse dsi_read() and dsi_write() here?
> +static int check_status(struct dw_mipi_dsi *dsi, u32 reg, u32 status,
> + unsigned int timeout, bool to_set)
> +{
> + unsigned long expire;
> + bool out;
> + u32 val;
> +
> + expire = jiffies + msecs_to_jiffies(timeout);
> + for (;;) {
> + val = dsi_read(dsi, reg);
> + out = to_set ? ((val & status) == status) : !(val & status);
> + if (out)
> + break;
> +
> + if (time_after(jiffies, expire))
> + return -ETIMEDOUT;
> +
> + cpu_relax();
> + }
> +
> + return 0;
> +}
Perhaps use the helpers in linux/iopoll.h?
> +/*
> + * The controller should generate 2 frames before
> + * preparing the peripheral.
> + */
> +static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
> +{
> + unsigned long expire;
> + int refresh, two_frames;
> +
> + refresh = drm_mode_vrefresh(dsi->mode);
> + two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> +
> + expire = jiffies + msecs_to_jiffies(two_frames);
> + while (time_before(jiffies, expire))
> + cpu_relax();
> +}
That's kind of rude. You know already how long it will take for two
frames to be sent, why not just sleep for that time? usleep_range() or
in this case most likely msleep() would be more civil options.
> +static void dw_mipi_dsi_phy_test(struct dw_mipi_dsi *dsi, u8 test_code,
> + u8 test_data)
> +{
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_TESTEN | PHY_TESTDOUT(0) |
> + PHY_TESTDIN(test_code));
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL1, PHY_UNTESTEN | PHY_TESTDOUT(0) |
> + PHY_TESTDIN(test_data));
> +
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLK | PHY_UNTESTCLR);
> + dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLK | PHY_UNTESTCLR);
> +}
This looks like it's actually programming something, rather than
testing. Can you perhaps add a comment to this explaining what exactly
it's doing?
> +static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
> +{
> + int ret, testdin, vco;
> +
> + vco = (dsi->lane_mbps < 200) ? 0 : (dsi->lane_mbps + 100) / 200;
> +
> + testdin = max_mbps_to_testdin(dsi->lane_mbps);
> + if (testdin < 0) {
> + dev_err(dsi->dev,
> + "failed to get testdin for %dmbps lane clock\n",
> + dsi->lane_mbps);
> + return testdin;
> + }
> +
> + dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x10, 0x80 | (vco & 0x7) << 3 | 0x3);
> + dw_mipi_dsi_phy_test(dsi, 0x11, 0x8);
> + dw_mipi_dsi_phy_test(dsi, 0x12, 0xc0);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x44, testdin << 1);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x17, dsi->input_div - 1);
> + dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) & 0x1f);
> + dw_mipi_dsi_phy_test(dsi, 0x18, (dsi->feedback_div - 1) >> 5 | 0x80);
> + dw_mipi_dsi_phy_test(dsi, 0x19, 0x30);
> +
> + dw_mipi_dsi_phy_test(dsi, 0x20, 0x4d);
> + dw_mipi_dsi_phy_test(dsi, 0x21, 0x3d);
> + dw_mipi_dsi_phy_test(dsi, 0x21, 0xdf);
> + dw_mipi_dsi_phy_test(dsi, 0x22, 0x7);
> + dw_mipi_dsi_phy_test(dsi, 0x22, 0x87);
> + dw_mipi_dsi_phy_test(dsi, 0x70, 0x80 | 0xf);
> + dw_mipi_dsi_phy_test(dsi, 0x71, 0x80 | 0x55);
> + dw_mipi_dsi_phy_test(dsi, 0x72, 0x40 | 0xa);
Can we have symbolic names for these values?
> + dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK
> + | PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
I think it's more conventional to put the | on the first line. I also
think it'd be more readable to align PHY_UNRSTZ | PHY_UNSHUTDOWNZ with
the other values that form this parameter, like so:
dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> +static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
> +{
> + int bpp, i;
i should be unsigned int.
> + unsigned int max_mbps = 0, target_mbps = 1000;
> + unsigned long mpclk, pllref, tmp;
> + int m = 1, n = 1, pre;
These can be unsigned int as well.
> +
> + for (i = 0; i < ARRAY_SIZE(dptdin_map); i++) {
> + if (max_mbps < dptdin_map[i].max_mbps)
> + max_mbps = dptdin_map[i].max_mbps;
> + }
Looks to me like this will always be 1500. Why go through the trouble of
looking up the value if you know that the table is sorted by increasing
max_mbps? Hard-coding to 1500 isn't very nice either, but you could do
something like:
max_mbps = dptdin_map[ARRAY_SIZE(dptdin_map) - 1].max_mbps;
> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> + struct mipi_dsi_device *device)
> +{
> + struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> + if (device->lanes > dsi->pdata->max_data_lanes) {
> + dev_err(dsi->dev, "the number of data lanes(%d) is too many\n",
Use %u for unsigned integers.
> + device->lanes);
> + return -EINVAL;
> + }
> +
> + if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) ||
> + !(device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {
> + dev_err(dsi->dev, "device mode is unsupported\n");
> + return -EINVAL;
> + }
> +
> + dsi->lanes = device->lanes;
> + dsi->channel = device->channel;
> + dsi->format = device->format;
> + dsi->panel = of_drm_find_panel(device->dev.of_node);
You might want to check this for validity?
> + drm_panel_attach(dsi->panel, &dsi->connector);
You should check for errors here.
> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> + const struct mipi_dsi_msg *msg)
> +{
> + const u16 *tx_buf = msg->tx_buf;
> + u32 val = GEN_HDATA(*tx_buf) | GEN_HTYPE(msg->type);
> +
> + if (msg->tx_len > 2) {
> + dev_err(dsi->dev, "too long tx buf length %d for short write\n",
> + (int)msg->tx_len);
No need to cast here. Simply use %zu as the format specifier.
> + return -EINVAL;
> + }
> +
> + return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> +}
> +
> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> + const struct mipi_dsi_msg *msg)
> +{
> + const u32 *tx_buf = msg->tx_buf;
> + int len = msg->tx_len, pld_data_bytes = sizeof(*tx_buf), ret;
> + u32 val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> + u32 remainder = 0;
> +
> + if (msg->tx_len < 3) {
> + dev_err(dsi->dev, "wrong tx buf length %d for long write\n",
> + (int)msg->tx_len);
Same here.
> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> + struct dw_mipi_dsi *dsi = bridge->driver_private;
> +
> + if (dsi->enabled)
> + return;
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_prepare_enable(dsi->cfg_clk);
> +
> + clk_prepare_enable(dsi->pclk);
Please always error-check clk_prepare() and clk_enable() (or the
combination clk_prepare_enable()). They can fail.
> + dw_mipi_dsi_phy_init(dsi);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> + dw_mipi_dsi_wait_for_two_frames(dsi);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + drm_panel_prepare(dsi->panel);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> + clk_disable_unprepare(dsi->pclk);
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_disable_unprepare(dsi->cfg_clk);
> +
> + drm_panel_enable(dsi->panel);
> +
> + dsi->enabled = true;
> +}
> +
> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> + struct dw_mipi_dsi *dsi = bridge->driver_private;
> + unsigned long expire;
> +
> + if (!dsi->enabled)
> + return;
> +
> + drm_panel_disable(dsi->panel);
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_prepare_enable(dsi->cfg_clk);
> +
> + clk_prepare_enable(dsi->pclk);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + drm_panel_unprepare(dsi->panel);
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +
> + /*
> + * This is necessary to make sure the peripheral
> + * will be driven normally when the display is
> + * enabled again later.
> + */
You can use longer lines for comments. No need to split it across three
lines if you can make it fit on two.
> + expire = jiffies + msecs_to_jiffies(120);
> + while (time_before(jiffies, expire))
> + cpu_relax();
Again, cpu_relax() isn't really relaxing the CPU to the extent that it
might lead you to think. If you know you want to sleep for 120 ms, just
do msleep(120).
> +
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + dw_mipi_dsi_disable(dsi);
> + clk_disable_unprepare(dsi->pclk);
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_disable_unprepare(dsi->cfg_clk);
> +
> + dsi->enabled = false;
> +}
> +
> +static void dw_mipi_dsi_bridge_nope(struct drm_bridge *bridge)
Hehe, perhaps dw_mipi_dsi_bridge_nop()? Or simply leave the function
pointers NULL, but I guess you had to add this because the DRM bridge
infrastructure doesn't allow these to be optional. We might want to
change that.
> +{
> + /* do nothing */
> +}
> +
> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> +{
> + dsi_write(dsi, DSI_PWR_UP, RESET);
> + dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> + | PHY_RSTZ | PHY_SHUTDOWNZ);
> + dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> + TX_ESC_CLK_DIVIDSION(7));
> + dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +}
> +
> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> + struct drm_display_mode *mode)
> +{
> + u32 val = 0, calor = 0;
"color"?
> +static void dw_mipi_dsi_bridge_mode_set(struct drm_bridge *bridge,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct dw_mipi_dsi *dsi = bridge->driver_private;
> + int ret;
> +
> + dsi->mode = adjusted_mode;
> +
> + ret = dw_mipi_dsi_get_lane_bps(dsi);
> + if (ret < 0)
> + return;
> +
> + if (!IS_ERR(dsi->cfg_clk))
> + clk_prepare_enable(dsi->cfg_clk);
> +
> + clk_prepare_enable(dsi->pclk);
Again, check errors from clk_prepare_enable(), ...
> + dw_mipi_dsi_init(dsi);
> + dw_mipi_dsi_dpi_config(dsi, mode);
> + dw_mipi_dsi_packet_handler_config(dsi);
> + dw_mipi_dsi_video_mode_config(dsi);
> + dw_mipi_dsi_video_packet_config(dsi, mode);
> + dw_mipi_dsi_command_mode_config(dsi);
> + dw_mipi_dsi_line_timer_config(dsi);
> + dw_mipi_dsi_vertical_timing_config(dsi);
> + dw_mipi_dsi_dphy_timing_config(dsi);
> + dw_mipi_dsi_dphy_interface_config(dsi);
> + dw_mipi_dsi_clear_err(dsi);
> + dw_mipi_dsi_phy_init(dsi);
> + dw_mipi_dsi_wait_for_two_frames(dsi);
> + drm_panel_prepare(dsi->panel);
... and drm_panel_prepare().
> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
static const, please.
> +int dw_mipi_dsi_bind(struct device *dev, struct device *master, void *data,
> + struct drm_encoder *encoder,
> + const struct dw_mipi_dsi_plat_data *pdata)
> +{
[...]
> + dsi->cfg_clk = devm_clk_get(dev, "cfg");
> + if (IS_ERR(dsi->cfg_clk))
> + dev_warn(dev, "Have no configuration clock\n");
Is this truly optional?
> + dsi->pclk = devm_clk_get(dev, "pclk");
> + if (IS_ERR(dsi->pclk)) {
> + ret = PTR_ERR(dsi->pclk);
> + dev_err(dev, "Unable to get configuration clock: %d\n", ret);
pclk doesn't seem to be a "configuration clock".
> + dev_info(dev, "version number is 0x%08x\n", val);
Do you really need this information? What purpose does it serve to have
this in the kernel log?
> diff --git a/include/drm/bridge/dw_mipi_dsi.h b/include/drm/bridge/dw_mipi_dsi.h
> new file mode 100644
> index 0000000..2e351e4
> --- /dev/null
> +++ b/include/drm/bridge/dw_mipi_dsi.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + */
> +
> +#ifndef __DW_MIPI_DSI__
> +#define __DW_MIPI_DSI__
> +
> +#include <drm/drmP.h>
> +
> +struct dw_mipi_dsi_plat_data {
> + unsigned int max_data_lanes;
> + enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
> + struct drm_display_mode *mode);
> +};
> +
> +int dw_mipi_dsi_get_encoder_pixel_format(struct drm_encoder *encoder);
> +
> +int dw_mipi_dsi_bind(struct device *dev, struct device *master,
> + void *data, struct drm_encoder *encoder,
> + const struct dw_mipi_dsi_plat_data *pdata);
> +void dw_mipi_dsi_unbind(struct device *dev, struct device *master, void *data);
> +#endif /* __DW_MIPI_DSI__ */
Should have a blank line between the two above.
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 10/13] of: add vendor prefix for boe
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-23 8:08 ` Thierry Reding
-1 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-23 8:08 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Arnd Bergmann,
Jonathan Cameron, Dmitry Torokhov, Arnaud Ebalard,
Kuninori Morimoto, devicetree, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 410 bytes --]
On Fri, Nov 20, 2015 at 04:15:36PM +0800, Chris Zhong wrote:
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> 1 file changed, 1 insertion(+)
Applied, with slightly modified commit message.
Thanks,
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 10/13] of: add vendor prefix for boe
@ 2015-11-23 8:08 ` Thierry Reding
0 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-23 8:08 UTC (permalink / raw)
To: Chris Zhong
Cc: Mark Rutland, devicetree, Kuninori Morimoto, Arnaud Ebalard,
Pawel Moll, Ian Campbell, Dmitry Torokhov, emil.l.velikov,
linux-kernel, dri-devel, linux-rockchip, Rob Herring,
Arnd Bergmann, Kumar Gala, rmk+kernel, ajaykumar.rs,
Jonathan Cameron
[-- Attachment #1.1: Type: text/plain, Size: 410 bytes --]
On Fri, Nov 20, 2015 at 04:15:36PM +0800, Chris Zhong wrote:
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> 1 file changed, 1 insertion(+)
Applied, with slightly modified commit message.
Thanks,
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-23 8:09 ` Thierry Reding
-1 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-23 8:09 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Thierry Reding,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 531 bytes --]
On Fri, Nov 20, 2015 at 04:15:37PM +0800, Chris Zhong wrote:
> This adds support for the BOE TV080WUM-NL0 1200x1920 mipi panel to the
> DRM simple panel driver.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4:
> Alphabetically arranged the name
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
Applied, with slightly modified commit message.
Thanks,
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0
@ 2015-11-23 8:09 ` Thierry Reding
0 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-23 8:09 UTC (permalink / raw)
To: Chris Zhong
Cc: emil.l.velikov, linux-kernel, dri-devel, linux-rockchip,
rmk+kernel, ajaykumar.rs
[-- Attachment #1.1: Type: text/plain, Size: 531 bytes --]
On Fri, Nov 20, 2015 at 04:15:37PM +0800, Chris Zhong wrote:
> This adds support for the BOE TV080WUM-NL0 1200x1920 mipi panel to the
> DRM simple panel driver.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4:
> Alphabetically arranged the name
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
Applied, with slightly modified commit message.
Thanks,
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 12/13] drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree binding
2015-11-20 8:15 ` [PATCH v4 12/13] drm/panel: simple: Add boe, tv080wum-nl0 " Chris Zhong
@ 2015-11-23 8:10 ` Thierry Reding
-1 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-23 8:10 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Thierry Reding, Rob Herring,
Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, devicetree,
linux-kernel
[-- Attachment #1: Type: text/plain, Size: 975 bytes --]
On Fri, Nov 20, 2015 at 04:15:38PM +0800, Chris Zhong wrote:
> This binding specifies a set of common properties for display panels. It
> can be used as a basis by bindings for specific panels.
> Bindings for three specific panels are provided to show how the
> simple panel binding can be used.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ---
>
> Changes in v4: None
> Changes in v3:
> move boe,tv080wum-nl0.txt to bindings/display/panel/
>
> Changes in v2:
> As Thierry.Reding comment, add a documentation for this panel.
>
> .../devicetree/bindings/display/panel/boe,tv080wum-nl0.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
Applied, with a rewritten commit message. The one above seems to be
copied from the original commit that added the simple-panel binding.
Thanks,
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 12/13] drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree binding
@ 2015-11-23 8:10 ` Thierry Reding
0 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-23 8:10 UTC (permalink / raw)
To: Chris Zhong
Cc: Mark Rutland, devicetree, Pawel Moll, Ian Campbell,
emil.l.velikov, linux-kernel, dri-devel, linux-rockchip,
Kumar Gala, Rob Herring, rmk+kernel, ajaykumar.rs
[-- Attachment #1.1: Type: text/plain, Size: 975 bytes --]
On Fri, Nov 20, 2015 at 04:15:38PM +0800, Chris Zhong wrote:
> This binding specifies a set of common properties for display panels. It
> can be used as a basis by bindings for specific panels.
> Bindings for three specific panels are provided to show how the
> simple panel binding can be used.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ---
>
> Changes in v4: None
> Changes in v3:
> move boe,tv080wum-nl0.txt to bindings/display/panel/
>
> Changes in v2:
> As Thierry.Reding comment, add a documentation for this panel.
>
> .../devicetree/bindings/display/panel/boe,tv080wum-nl0.txt | 7 +++++++
> 1 file changed, 7 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
Applied, with a rewritten commit message. The one above seems to be
copied from the original commit that added the simple-panel binding.
Thanks,
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 159 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 01/13] clk: rockchip: add id for mipidsi sclk on rk3288
2015-11-20 8:15 ` Chris Zhong
@ 2015-11-23 17:29 ` Heiko Stübner
-1 siblings, 0 replies; 56+ messages in thread
From: Heiko Stübner @ 2015-11-23 17:29 UTC (permalink / raw)
To: Chris Zhong
Cc: linux-rockchip, mark.yao, treding, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Rob Herring, Pawel Moll,
Mark Rutland, Ian Campbell, Kumar Gala, Doug Anderson,
Kever Yang, Huang Lin, Sonny Rao, Jeff Chen, Roger Chen,
Alexandru M Stan, devicetree, linux-kernel
Hi Chris,
Am Freitag, 20. November 2015, 16:15:27 schrieb Chris Zhong:
> Adds a new id for the sclk supplying the mipidsi on rk3288 socs.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> add the mipi clk id in a single patch
>
> include/dt-bindings/clock/rk3288-cru.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/dt-bindings/clock/rk3288-cru.h
> b/include/dt-bindings/clock/rk3288-cru.h index c719aac..b07cdd3 100644
> --- a/include/dt-bindings/clock/rk3288-cru.h
> +++ b/include/dt-bindings/clock/rk3288-cru.h
> @@ -86,6 +86,7 @@
> #define SCLK_USBPHY480M_SRC 122
> #define SCLK_PVTM_CORE 123
> #define SCLK_PVTM_GPU 124
> +#define SCLK_MIPI_24M 125
in the TRM (and therefore in the clock-controller) this is labeled as
sclk_mipidsi_24m, so I'd think the clock-id shouls also contain the
DSI part as well, making it SCLK_MIPIDSI_24M
Heiko
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 01/13] clk: rockchip: add id for mipidsi sclk on rk3288
@ 2015-11-23 17:29 ` Heiko Stübner
0 siblings, 0 replies; 56+ messages in thread
From: Heiko Stübner @ 2015-11-23 17:29 UTC (permalink / raw)
To: Chris Zhong
Cc: Mark Rutland, Kever Yang, dri-devel, linux-kernel, ajaykumar.rs,
Jeff Chen, linux-rockchip, rmk+kernel, treding, devicetree,
Alexandru M Stan, Pawel Moll, Ian Campbell, Rob Herring,
Roger Chen, Sonny Rao, Huang Lin, emil.l.velikov, Doug Anderson,
Kumar Gala
Hi Chris,
Am Freitag, 20. November 2015, 16:15:27 schrieb Chris Zhong:
> Adds a new id for the sclk supplying the mipidsi on rk3288 socs.
>
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2:
> add the mipi clk id in a single patch
>
> include/dt-bindings/clock/rk3288-cru.h | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/include/dt-bindings/clock/rk3288-cru.h
> b/include/dt-bindings/clock/rk3288-cru.h index c719aac..b07cdd3 100644
> --- a/include/dt-bindings/clock/rk3288-cru.h
> +++ b/include/dt-bindings/clock/rk3288-cru.h
> @@ -86,6 +86,7 @@
> #define SCLK_USBPHY480M_SRC 122
> #define SCLK_PVTM_CORE 123
> #define SCLK_PVTM_GPU 124
> +#define SCLK_MIPI_24M 125
in the TRM (and therefore in the clock-controller) this is labeled as
sclk_mipidsi_24m, so I'd think the clock-id shouls also contain the
DSI part as well, making it SCLK_MIPIDSI_24M
Heiko
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
2015-11-20 16:07 ` Thierry Reding
@ 2015-11-26 7:03 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-26 7:03 UTC (permalink / raw)
To: Thierry Reding
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Inki Dae, Takashi Iwai,
Vincent Palatin, Andy Yan, Rahul Sharma, Sean Paul,
Andrew Bresticker, linux-kernel
Hi Thierry
Thanks for your feedback.
On 11/21/2015 12:07 AM, Thierry Reding wrote:
> On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
>> add Synopsys DesignWare MIPI DSI host controller driver support.
>>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>> ---
>>
>> Changes in v4:
>> eliminate some warnning
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> drivers/gpu/drm/bridge/Kconfig | 11 +
>> drivers/gpu/drm/bridge/Makefile | 1 +
>> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
>> include/drm/bridge/dw_mipi_dsi.h | 27 +
>> 4 files changed, 1095 insertions(+)
>> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
>> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>>
>>
>> +struct dw_mipi_dsi {
>> + struct mipi_dsi_host dsi_host;
>> + struct drm_connector connector;
>> + struct drm_encoder *encoder;
> struct drm_bridge already has a pointer to an encoder, can't you reuse
> that instead?
>
>> + struct drm_bridge *bridge;
> Typically you'd embed the bridge into the driver structure.
I'm almost done with all the modifications according to your comments.
Remaining this point I can not understand, the dsi is a pointer of
drm_bridge,
hence I can not get the bridge by container_of.
Although, the "bridge->driver_private = dsi" have done in
dw_mipi_dsi_register.
>
>> + struct drm_panel *panel;
>> + struct device *dev;
>> +
>> + void __iomem *base;
>> +
>> + struct clk *pllref_clk;
>> + struct clk *cfg_clk;
>> + struct clk *pclk;
>> +
>> + unsigned int lane_mbps; /* per lane */
>> + u32 channel;
>> + u32 lanes;
>> + u32 format;
>> + u16 input_div;
>> + u16 feedback_div;
>> + struct drm_display_mode *mode;
>> +
>> + const struct dw_mipi_dsi_plat_data *pdata;
>> +
>> + bool enabled;
>> +};
>> +
>>
>>
>> Thierry
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
@ 2015-11-26 7:03 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-26 7:03 UTC (permalink / raw)
To: Thierry Reding
Cc: Vincent Palatin, Andrew Bresticker, emil.l.velikov, linux-kernel,
dri-devel, linux-rockchip, Andy Yan, rmk+kernel, Rahul Sharma,
ajaykumar.rs
Hi Thierry
Thanks for your feedback.
On 11/21/2015 12:07 AM, Thierry Reding wrote:
> On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
>> add Synopsys DesignWare MIPI DSI host controller driver support.
>>
>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>> ---
>>
>> Changes in v4:
>> eliminate some warnning
>>
>> Changes in v3: None
>> Changes in v2: None
>>
>> drivers/gpu/drm/bridge/Kconfig | 11 +
>> drivers/gpu/drm/bridge/Makefile | 1 +
>> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
>> include/drm/bridge/dw_mipi_dsi.h | 27 +
>> 4 files changed, 1095 insertions(+)
>> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
>> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>>
>>
>> +struct dw_mipi_dsi {
>> + struct mipi_dsi_host dsi_host;
>> + struct drm_connector connector;
>> + struct drm_encoder *encoder;
> struct drm_bridge already has a pointer to an encoder, can't you reuse
> that instead?
>
>> + struct drm_bridge *bridge;
> Typically you'd embed the bridge into the driver structure.
I'm almost done with all the modifications according to your comments.
Remaining this point I can not understand, the dsi is a pointer of
drm_bridge,
hence I can not get the bridge by container_of.
Although, the "bridge->driver_private = dsi" have done in
dw_mipi_dsi_register.
>
>> + struct drm_panel *panel;
>> + struct device *dev;
>> +
>> + void __iomem *base;
>> +
>> + struct clk *pllref_clk;
>> + struct clk *cfg_clk;
>> + struct clk *pclk;
>> +
>> + unsigned int lane_mbps; /* per lane */
>> + u32 channel;
>> + u32 lanes;
>> + u32 format;
>> + u16 input_div;
>> + u16 feedback_div;
>> + struct drm_display_mode *mode;
>> +
>> + const struct dw_mipi_dsi_plat_data *pdata;
>> +
>> + bool enabled;
>> +};
>> +
>>
>>
>> Thierry
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
2015-11-26 7:03 ` Chris Zhong
@ 2015-11-26 8:04 ` Thierry Reding
-1 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-26 8:04 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Inki Dae, Takashi Iwai,
Vincent Palatin, Andy Yan, Rahul Sharma, Sean Paul,
Andrew Bresticker, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2143 bytes --]
On Thu, Nov 26, 2015 at 03:03:54PM +0800, Chris Zhong wrote:
> Hi Thierry
>
> Thanks for your feedback.
>
>
> On 11/21/2015 12:07 AM, Thierry Reding wrote:
> >On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
> >>add Synopsys DesignWare MIPI DSI host controller driver support.
> >>
> >>Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> >>---
> >>
> >>Changes in v4:
> >>eliminate some warnning
> >>
> >>Changes in v3: None
> >>Changes in v2: None
> >>
> >> drivers/gpu/drm/bridge/Kconfig | 11 +
> >> drivers/gpu/drm/bridge/Makefile | 1 +
> >> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
> >> include/drm/bridge/dw_mipi_dsi.h | 27 +
> >> 4 files changed, 1095 insertions(+)
> >> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
> >> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
> >>
> >>
> >>+struct dw_mipi_dsi {
> >>+ struct mipi_dsi_host dsi_host;
> >>+ struct drm_connector connector;
> >>+ struct drm_encoder *encoder;
> >struct drm_bridge already has a pointer to an encoder, can't you reuse
> >that instead?
> >
> >>+ struct drm_bridge *bridge;
> >Typically you'd embed the bridge into the driver structure.
> I'm almost done with all the modifications according to your comments.
> Remaining this point I can not understand, the dsi is a pointer of
> drm_bridge,
> hence I can not get the bridge by container_of.
> Although, the "bridge->driver_private = dsi" have done in
> dw_mipi_dsi_register.
I don't understand. If you don't make bridge a pointer, but rather embed
it within the structure, then you can use container_of(), can't you? You
get it allocated automatically as part of allocating the dw_mipi_dsi
structure. See for example the ps8622 and ptn3460 bridge drivers.
On a slightly unrelated note, I'm not sure if we discussed this already
or if it was in another thread, but why is this even a bridge driver? A
bridge is typically some IC outside of the SoC, whereas this clearly is
IP designed into the SoC. So it's really more of an encoder rather than
a bridge.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
@ 2015-11-26 8:04 ` Thierry Reding
0 siblings, 0 replies; 56+ messages in thread
From: Thierry Reding @ 2015-11-26 8:04 UTC (permalink / raw)
To: Chris Zhong
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Inki Dae, Takashi Iwai,
Vincent Palatin, Andy Yan, Rahul Sharma, Sean Paul,
Andrew Bresticker, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 2143 bytes --]
On Thu, Nov 26, 2015 at 03:03:54PM +0800, Chris Zhong wrote:
> Hi Thierry
>
> Thanks for your feedback.
>
>
> On 11/21/2015 12:07 AM, Thierry Reding wrote:
> >On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
> >>add Synopsys DesignWare MIPI DSI host controller driver support.
> >>
> >>Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> >>---
> >>
> >>Changes in v4:
> >>eliminate some warnning
> >>
> >>Changes in v3: None
> >>Changes in v2: None
> >>
> >> drivers/gpu/drm/bridge/Kconfig | 11 +
> >> drivers/gpu/drm/bridge/Makefile | 1 +
> >> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
> >> include/drm/bridge/dw_mipi_dsi.h | 27 +
> >> 4 files changed, 1095 insertions(+)
> >> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
> >> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
> >>
> >>
> >>+struct dw_mipi_dsi {
> >>+ struct mipi_dsi_host dsi_host;
> >>+ struct drm_connector connector;
> >>+ struct drm_encoder *encoder;
> >struct drm_bridge already has a pointer to an encoder, can't you reuse
> >that instead?
> >
> >>+ struct drm_bridge *bridge;
> >Typically you'd embed the bridge into the driver structure.
> I'm almost done with all the modifications according to your comments.
> Remaining this point I can not understand, the dsi is a pointer of
> drm_bridge,
> hence I can not get the bridge by container_of.
> Although, the "bridge->driver_private = dsi" have done in
> dw_mipi_dsi_register.
I don't understand. If you don't make bridge a pointer, but rather embed
it within the structure, then you can use container_of(), can't you? You
get it allocated automatically as part of allocating the dw_mipi_dsi
structure. See for example the ps8622 and ptn3460 bridge drivers.
On a slightly unrelated note, I'm not sure if we discussed this already
or if it was in another thread, but why is this even a bridge driver? A
bridge is typically some IC outside of the SoC, whereas this clearly is
IP designed into the SoC. So it's really more of an encoder rather than
a bridge.
Thierry
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
2015-11-26 8:04 ` Thierry Reding
@ 2015-11-26 10:05 ` Chris Zhong
-1 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-26 10:05 UTC (permalink / raw)
To: Thierry Reding
Cc: heiko, linux-rockchip, mark.yao, emil.l.velikov, airlied,
ajaykumar.rs, rmk+kernel, dri-devel, Inki Dae, Takashi Iwai,
Vincent Palatin, Andy Yan, Rahul Sharma, Sean Paul,
Andrew Bresticker, linux-kernel, architt
On 11/26/2015 04:04 PM, Thierry Reding wrote:
> On Thu, Nov 26, 2015 at 03:03:54PM +0800, Chris Zhong wrote:
>> Hi Thierry
>>
>> Thanks for your feedback.
>>
>>
>> On 11/21/2015 12:07 AM, Thierry Reding wrote:
>>> On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
>>>> add Synopsys DesignWare MIPI DSI host controller driver support.
>>>>
>>>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>>> ---
>>>>
>>>> Changes in v4:
>>>> eliminate some warnning
>>>>
>>>> Changes in v3: None
>>>> Changes in v2: None
>>>>
>>>> drivers/gpu/drm/bridge/Kconfig | 11 +
>>>> drivers/gpu/drm/bridge/Makefile | 1 +
>>>> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
>>>> include/drm/bridge/dw_mipi_dsi.h | 27 +
>>>> 4 files changed, 1095 insertions(+)
>>>> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
>>>> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>>>>
>>>>
>>>> +struct dw_mipi_dsi {
>>>> + struct mipi_dsi_host dsi_host;
>>>> + struct drm_connector connector;
>>>> + struct drm_encoder *encoder;
>>> struct drm_bridge already has a pointer to an encoder, can't you reuse
>>> that instead?
>>>
>>>> + struct drm_bridge *bridge;
>>> Typically you'd embed the bridge into the driver structure.
>> I'm almost done with all the modifications according to your comments.
>> Remaining this point I can not understand, the dsi is a pointer of
>> drm_bridge,
>> hence I can not get the bridge by container_of.
>> Although, the "bridge->driver_private = dsi" have done in
>> dw_mipi_dsi_register.
> I don't understand. If you don't make bridge a pointer, but rather embed
> it within the structure, then you can use container_of(), can't you? You
> get it allocated automatically as part of allocating the dw_mipi_dsi
> structure. See for example the ps8622 and ptn3460 bridge drivers.
Yeah, got it, thanks. :)
I am going to modify it in next version patch.
>
> On a slightly unrelated note, I'm not sure if we discussed this already
> or if it was in another thread, but why is this even a bridge driver? A
> bridge is typically some IC outside of the SoC, whereas this clearly is
> IP designed into the SoC. So it's really more of an encoder rather than
> a bridge.
I guess you mean this thread <https://patchwork.kernel.org/patch/5816991/>
I think the bridge is beneficial to share the dw-mipi driver for
different soc
with same version dw-mipi IP.
>
> Thierry
^ permalink raw reply [flat|nested] 56+ messages in thread
* Re: [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
@ 2015-11-26 10:05 ` Chris Zhong
0 siblings, 0 replies; 56+ messages in thread
From: Chris Zhong @ 2015-11-26 10:05 UTC (permalink / raw)
To: Thierry Reding
Cc: Vincent Palatin, Andrew Bresticker, emil.l.velikov, linux-kernel,
dri-devel, linux-rockchip, Andy Yan, rmk+kernel, Rahul Sharma,
ajaykumar.rs
On 11/26/2015 04:04 PM, Thierry Reding wrote:
> On Thu, Nov 26, 2015 at 03:03:54PM +0800, Chris Zhong wrote:
>> Hi Thierry
>>
>> Thanks for your feedback.
>>
>>
>> On 11/21/2015 12:07 AM, Thierry Reding wrote:
>>> On Fri, Nov 20, 2015 at 04:15:32PM +0800, Chris Zhong wrote:
>>>> add Synopsys DesignWare MIPI DSI host controller driver support.
>>>>
>>>> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
>>>> ---
>>>>
>>>> Changes in v4:
>>>> eliminate some warnning
>>>>
>>>> Changes in v3: None
>>>> Changes in v2: None
>>>>
>>>> drivers/gpu/drm/bridge/Kconfig | 11 +
>>>> drivers/gpu/drm/bridge/Makefile | 1 +
>>>> drivers/gpu/drm/bridge/dw_mipi_dsi.c | 1056 ++++++++++++++++++++++++++++++++++
>>>> include/drm/bridge/dw_mipi_dsi.h | 27 +
>>>> 4 files changed, 1095 insertions(+)
>>>> create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
>>>> create mode 100644 include/drm/bridge/dw_mipi_dsi.h
>>>>
>>>>
>>>> +struct dw_mipi_dsi {
>>>> + struct mipi_dsi_host dsi_host;
>>>> + struct drm_connector connector;
>>>> + struct drm_encoder *encoder;
>>> struct drm_bridge already has a pointer to an encoder, can't you reuse
>>> that instead?
>>>
>>>> + struct drm_bridge *bridge;
>>> Typically you'd embed the bridge into the driver structure.
>> I'm almost done with all the modifications according to your comments.
>> Remaining this point I can not understand, the dsi is a pointer of
>> drm_bridge,
>> hence I can not get the bridge by container_of.
>> Although, the "bridge->driver_private = dsi" have done in
>> dw_mipi_dsi_register.
> I don't understand. If you don't make bridge a pointer, but rather embed
> it within the structure, then you can use container_of(), can't you? You
> get it allocated automatically as part of allocating the dw_mipi_dsi
> structure. See for example the ps8622 and ptn3460 bridge drivers.
Yeah, got it, thanks. :)
I am going to modify it in next version patch.
>
> On a slightly unrelated note, I'm not sure if we discussed this already
> or if it was in another thread, but why is this even a bridge driver? A
> bridge is typically some IC outside of the SoC, whereas this clearly is
> IP designed into the SoC. So it's really more of an encoder rather than
> a bridge.
I guess you mean this thread <https://patchwork.kernel.org/patch/5816991/>
I think the bridge is beneficial to share the dw-mipi driver for
different soc
with same version dw-mipi IP.
>
> Thierry
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 56+ messages in thread
end of thread, other threads:[~2015-11-26 10:06 UTC | newest]
Thread overview: 56+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-20 8:15 [PATCH v4 0/13] Add mipi dsi support for rk3288 Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 01/13] clk: rockchip: add id for mipidsi sclk on rk3288 Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-23 17:29 ` Heiko Stübner
2015-11-23 17:29 ` Heiko Stübner
2015-11-20 8:15 ` [PATCH v4 02/13] clk: rockchip: add mipidsi clocks " Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 03/13] drm/rockchip: return a true clock rate to adjusted_mode Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:57 ` Mark yao
2015-11-20 8:57 ` Mark yao
2015-11-20 8:57 ` Mark yao
2015-11-20 8:15 ` [PATCH v4 04/13] drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 14:32 ` Rob Herring
2015-11-20 14:32 ` Rob Herring
2015-11-20 8:15 ` [PATCH v4 06/13] drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 16:07 ` Thierry Reding
2015-11-20 16:07 ` Thierry Reding
2015-11-26 7:03 ` Chris Zhong
2015-11-26 7:03 ` Chris Zhong
2015-11-26 8:04 ` Thierry Reding
2015-11-26 8:04 ` Thierry Reding
2015-11-26 10:05 ` Chris Zhong
2015-11-26 10:05 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 07/13] drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` [PATCH v4 10/13] of: add vendor prefix for boe Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-23 8:08 ` Thierry Reding
2015-11-23 8:08 ` Thierry Reding
2015-11-20 8:15 ` [PATCH v4 11/13] drm/panel: simple: Add support for BOE TV080WUM-NL0 Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-23 8:09 ` Thierry Reding
2015-11-23 8:09 ` Thierry Reding
2015-11-20 8:15 ` [PATCH v4 12/13] drm/panel: simple: Add boe,tv080wum-nl0 simple panel device tree binding Chris Zhong
2015-11-20 8:15 ` [PATCH v4 12/13] drm/panel: simple: Add boe, tv080wum-nl0 " Chris Zhong
2015-11-23 8:10 ` [PATCH v4 12/13] drm/panel: simple: Add boe,tv080wum-nl0 " Thierry Reding
2015-11-23 8:10 ` Thierry Reding
2015-11-20 8:15 ` [PATCH v4 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb Chris Zhong
2015-11-20 8:15 ` Chris Zhong
2015-11-20 8:15 ` Chris Zhong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.