* [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate
@ 2015-12-18 9:00 Zidan Wang
2015-12-21 7:25 ` Nicolin Chen
2015-12-23 0:08 ` Applied "ASoC: fsl_asrc: add support for 8-30kHz output sample rate" to the asoc tree Mark Brown
0 siblings, 2 replies; 3+ messages in thread
From: Zidan Wang @ 2015-12-18 9:00 UTC (permalink / raw)
To: broonie; +Cc: alsa-devel, Zidan Wang, Xiubo.Lee, tiwai, nicoleotsuka
Add 8kHz, 11.025kHz, 16kHz, 22.05kHz output sample rate support.
According referance menual, "Limited support for the case when
output sampling rates is between 8kHz and 30kHz. The limitation
is the supported ratio (Fsin/Fsout) range as between 1/24 to 8."
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
---
v1->v2:
1. fix indentation issue.
sound/soc/fsl/fsl_asrc.c | 39 +++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index d964016..bd32c30 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -31,21 +31,21 @@
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][8][2] = {
- /* 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
- {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
- {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
- {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
- {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
- {{0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
- {{1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
- {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
- {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
+static const u8 process_option[][12][2] = {
+ /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
+ {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
+ {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
+ {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
+ {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
+ {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
+ {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
+ {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
+ {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
};
/* Corresponding to process_option */
@@ -55,7 +55,7 @@ static int supported_input_rate[] = {
};
static int supported_asrc_rate[] = {
- 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
+ 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
};
/**
@@ -287,6 +287,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
+ if ((outrate > 8000 && outrate < 30000) &&
+ (outrate/inrate > 24 || inrate/outrate > 8)) {
+ pair_err("exceed supported ratio range [1/24, 8] for \
+ inrate/outrate: %d/%d\n", inrate, outrate);
+ return -EINVAL;
+ }
+
/* Validate input and output clock sources */
clk_index[IN] = clk_map[IN][config->inclk];
clk_index[OUT] = clk_map[OUT][config->outclk];
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate
2015-12-18 9:00 [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate Zidan Wang
@ 2015-12-21 7:25 ` Nicolin Chen
2015-12-23 0:08 ` Applied "ASoC: fsl_asrc: add support for 8-30kHz output sample rate" to the asoc tree Mark Brown
1 sibling, 0 replies; 3+ messages in thread
From: Nicolin Chen @ 2015-12-21 7:25 UTC (permalink / raw)
To: Zidan Wang; +Cc: alsa-devel, broonie, tiwai, Xiubo.Lee
On Fri, Dec 18, 2015 at 05:00:09PM +0800, Zidan Wang wrote:
> Add 8kHz, 11.025kHz, 16kHz, 22.05kHz output sample rate support.
>
> According referance menual, "Limited support for the case when
> output sampling rates is between 8kHz and 30kHz. The limitation
> is the supported ratio (Fsin/Fsout) range as between 1/24 to 8."
>
> Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Thank you
> ---
> v1->v2:
> 1. fix indentation issue.
>
> sound/soc/fsl/fsl_asrc.c | 39 +++++++++++++++++++++++----------------
> 1 file changed, 23 insertions(+), 16 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index d964016..bd32c30 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -31,21 +31,21 @@
> dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
>
> /* Sample rates are aligned with that defined in pcm.h file */
> -static const u8 process_option[][8][2] = {
> - /* 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
> - {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
> - {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
> - {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
> - {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
> - {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
> - {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
> - {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
> - {{0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
> - {{1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
> - {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
> - {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
> - {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
> - {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
> +static const u8 process_option[][12][2] = {
> + /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
> + {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
> + {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
> + {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
> + {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
> + {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
> + {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
> + {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
> + {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
> + {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
> + {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
> + {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
> + {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
> + {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
> };
>
> /* Corresponding to process_option */
> @@ -55,7 +55,7 @@ static int supported_input_rate[] = {
> };
>
> static int supported_asrc_rate[] = {
> - 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
> + 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
> };
>
> /**
> @@ -287,6 +287,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
> return -EINVAL;
> }
>
> + if ((outrate > 8000 && outrate < 30000) &&
> + (outrate/inrate > 24 || inrate/outrate > 8)) {
> + pair_err("exceed supported ratio range [1/24, 8] for \
> + inrate/outrate: %d/%d\n", inrate, outrate);
> + return -EINVAL;
> + }
> +
> /* Validate input and output clock sources */
> clk_index[IN] = clk_map[IN][config->inclk];
> clk_index[OUT] = clk_map[OUT][config->outclk];
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Applied "ASoC: fsl_asrc: add support for 8-30kHz output sample rate" to the asoc tree
2015-12-18 9:00 [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate Zidan Wang
2015-12-21 7:25 ` Nicolin Chen
@ 2015-12-23 0:08 ` Mark Brown
1 sibling, 0 replies; 3+ messages in thread
From: Mark Brown @ 2015-12-23 0:08 UTC (permalink / raw)
To: Zidan Wang, Nicolin Chen, Mark Brown; +Cc: alsa-devel
The patch
ASoC: fsl_asrc: add support for 8-30kHz output sample rate
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From fff6e03c7b659bfa2fa001b0ede71e4830a84b56 Mon Sep 17 00:00:00 2001
From: Zidan Wang <zidan.wang@freescale.com>
Date: Fri, 18 Dec 2015 17:00:09 +0800
Subject: [PATCH] ASoC: fsl_asrc: add support for 8-30kHz output sample rate
Add 8kHz, 11.025kHz, 16kHz, 22.05kHz output sample rate support.
According referance menual, "Limited support for the case when
output sampling rates is between 8kHz and 30kHz. The limitation
is the supported ratio (Fsin/Fsout) range as between 1/24 to 8."
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/fsl/fsl_asrc.c | 39 +++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index cf382475670b..7b811485a8e5 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -31,21 +31,21 @@
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][8][2] = {
- /* 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
- {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
- {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
- {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
- {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
- {{0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
- {{1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
- {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
- {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
+static const u8 process_option[][12][2] = {
+ /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
+ {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
+ {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
+ {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
+ {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
+ {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
+ {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
+ {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
+ {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
+ {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
};
/* Corresponding to process_option */
@@ -55,7 +55,7 @@ static int supported_input_rate[] = {
};
static int supported_asrc_rate[] = {
- 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
+ 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000,
};
/**
@@ -286,6 +286,13 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
+ if ((outrate > 8000 && outrate < 30000) &&
+ (outrate/inrate > 24 || inrate/outrate > 8)) {
+ pair_err("exceed supported ratio range [1/24, 8] for \
+ inrate/outrate: %d/%d\n", inrate, outrate);
+ return -EINVAL;
+ }
+
/* Validate input and output clock sources */
clk_index[IN] = clk_map[IN][config->inclk];
clk_index[OUT] = clk_map[OUT][config->outclk];
--
2.6.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-12-23 0:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-18 9:00 [PATCH v2] ASoC: fsl_asrc: add support for 8-30kHz output sample rate Zidan Wang
2015-12-21 7:25 ` Nicolin Chen
2015-12-23 0:08 ` Applied "ASoC: fsl_asrc: add support for 8-30kHz output sample rate" to the asoc tree Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.