From: Tina Ruchandani <ruchandani.tina@gmail.com> To: Arnd Bergmann <arnd@arndb.de> Cc: y2038@lists.linaro.org, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH v3] prism54: isl_38xx: Replace 'struct timeval' Date: Tue, 12 Apr 2016 23:09:16 -0700 [thread overview] Message-ID: <20160413060916.GA21184@localhost> (raw) 'struct timeval' uses a 32-bit seconds field which will overflow in year 2038 and beyond. This patch is part of a larger effort to remove all instances of 'struct timeval' from the kernel and replace them with 64-bit timekeeping variables. The patch also fixes the debug printf specifier to avoid the seconds value being truncated. The patch was build-tested / debugged by removing the "if VERBOSE > SHOW_ERROR_MESSAGES" guards. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> -- Changes in v3: Fix commit message Changes in v2: Changed printf specifier as suggested by Arnd Bergmann to avoid truncation. --- drivers/net/wireless/intersil/prism54/isl_38xx.c | 35 ++++++++++++------------ 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c index 333c1a2..6700387 100644 --- a/drivers/net/wireless/intersil/prism54/isl_38xx.c +++ b/drivers/net/wireless/intersil/prism54/isl_38xx.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/delay.h> +#include <linux/ktime.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -113,7 +114,7 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) #if VERBOSE > SHOW_ERROR_MESSAGES u32 counter = 0; - struct timeval current_time; + struct timespec64 current_ts64; DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n"); #endif @@ -121,22 +122,22 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) if (asleep) { /* device is in powersave, trigger the device for wakeup */ #if VERBOSE > SHOW_ERROR_MESSAGES - do_gettimeofday(¤t_time); - DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n", - current_time.tv_sec, (long)current_time.tv_usec); + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, "%lld.%09ld Device wakeup triggered\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec); - DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", - current_time.tv_sec, (long)current_time.tv_usec, + DEBUG(SHOW_TRACING, "%lld.%09ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, readl(device_base + ISL38XX_CTRL_STAT_REG)); #endif reg = readl(device_base + ISL38XX_INT_IDENT_REG); if (reg == 0xabadface) { #if VERBOSE > SHOW_ERROR_MESSAGES - do_gettimeofday(¤t_time); + ktime_get_real_ts64(¤t_ts64); DEBUG(SHOW_TRACING, - "%08li.%08li Device register abadface\n", - current_time.tv_sec, (long)current_time.tv_usec); + "%lld.%09ld Device register abadface\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec); #endif /* read the Device Status Register until Sleepmode bit is set */ while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG), @@ -149,13 +150,13 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) #if VERBOSE > SHOW_ERROR_MESSAGES DEBUG(SHOW_TRACING, - "%08li.%08li Device register read %08x\n", - current_time.tv_sec, (long)current_time.tv_usec, + "%lld.%09ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, readl(device_base + ISL38XX_CTRL_STAT_REG)); - do_gettimeofday(¤t_time); + ktime_get_real_ts64(¤t_ts64); DEBUG(SHOW_TRACING, - "%08li.%08li Device asleep counter %i\n", - current_time.tv_sec, (long)current_time.tv_usec, + "%lld.%09ld Device asleep counter %i\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, counter); #endif } @@ -168,9 +169,9 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) /* perform another read on the Device Status Register */ reg = readl(device_base + ISL38XX_CTRL_STAT_REG); - do_gettimeofday(¤t_time); - DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", - current_time.tv_sec, (long)current_time.tv_usec, reg); + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, "%lld.%00ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, reg); #endif } else { /* device is (still) awake */ -- 2.8.0.rc3.226.g39d4020
WARNING: multiple messages have this Message-ID (diff)
From: Tina Ruchandani <ruchandani.tina-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> To: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> Cc: y2038-cunTk1MwBs8s++Sfvej+rw@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Subject: [PATCH v3] prism54: isl_38xx: Replace 'struct timeval' Date: Tue, 12 Apr 2016 23:09:16 -0700 [thread overview] Message-ID: <20160413060916.GA21184@localhost> (raw) 'struct timeval' uses a 32-bit seconds field which will overflow in year 2038 and beyond. This patch is part of a larger effort to remove all instances of 'struct timeval' from the kernel and replace them with 64-bit timekeeping variables. The patch also fixes the debug printf specifier to avoid the seconds value being truncated. The patch was build-tested / debugged by removing the "if VERBOSE > SHOW_ERROR_MESSAGES" guards. Signed-off-by: Tina Ruchandani <ruchandani.tina-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Suggested-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> -- Changes in v3: Fix commit message Changes in v2: Changed printf specifier as suggested by Arnd Bergmann to avoid truncation. --- drivers/net/wireless/intersil/prism54/isl_38xx.c | 35 ++++++++++++------------ 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/net/wireless/intersil/prism54/isl_38xx.c b/drivers/net/wireless/intersil/prism54/isl_38xx.c index 333c1a2..6700387 100644 --- a/drivers/net/wireless/intersil/prism54/isl_38xx.c +++ b/drivers/net/wireless/intersil/prism54/isl_38xx.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/types.h> #include <linux/delay.h> +#include <linux/ktime.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -113,7 +114,7 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) #if VERBOSE > SHOW_ERROR_MESSAGES u32 counter = 0; - struct timeval current_time; + struct timespec64 current_ts64; DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n"); #endif @@ -121,22 +122,22 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) if (asleep) { /* device is in powersave, trigger the device for wakeup */ #if VERBOSE > SHOW_ERROR_MESSAGES - do_gettimeofday(¤t_time); - DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n", - current_time.tv_sec, (long)current_time.tv_usec); + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, "%lld.%09ld Device wakeup triggered\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec); - DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", - current_time.tv_sec, (long)current_time.tv_usec, + DEBUG(SHOW_TRACING, "%lld.%09ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, readl(device_base + ISL38XX_CTRL_STAT_REG)); #endif reg = readl(device_base + ISL38XX_INT_IDENT_REG); if (reg == 0xabadface) { #if VERBOSE > SHOW_ERROR_MESSAGES - do_gettimeofday(¤t_time); + ktime_get_real_ts64(¤t_ts64); DEBUG(SHOW_TRACING, - "%08li.%08li Device register abadface\n", - current_time.tv_sec, (long)current_time.tv_usec); + "%lld.%09ld Device register abadface\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec); #endif /* read the Device Status Register until Sleepmode bit is set */ while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG), @@ -149,13 +150,13 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) #if VERBOSE > SHOW_ERROR_MESSAGES DEBUG(SHOW_TRACING, - "%08li.%08li Device register read %08x\n", - current_time.tv_sec, (long)current_time.tv_usec, + "%lld.%09ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, readl(device_base + ISL38XX_CTRL_STAT_REG)); - do_gettimeofday(¤t_time); + ktime_get_real_ts64(¤t_ts64); DEBUG(SHOW_TRACING, - "%08li.%08li Device asleep counter %i\n", - current_time.tv_sec, (long)current_time.tv_usec, + "%lld.%09ld Device asleep counter %i\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, counter); #endif } @@ -168,9 +169,9 @@ isl38xx_trigger_device(int asleep, void __iomem *device_base) /* perform another read on the Device Status Register */ reg = readl(device_base + ISL38XX_CTRL_STAT_REG); - do_gettimeofday(¤t_time); - DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n", - current_time.tv_sec, (long)current_time.tv_usec, reg); + ktime_get_real_ts64(¤t_ts64); + DEBUG(SHOW_TRACING, "%lld.%00ld Device register read %08x\n", + (s64)current_ts64.tv_sec, current_ts64.tv_nsec, reg); #endif } else { /* device is (still) awake */ -- 2.8.0.rc3.226.g39d4020 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-04-13 8:25 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-04-13 6:09 Tina Ruchandani [this message] 2016-04-13 6:09 ` [PATCH v3] prism54: isl_38xx: Replace 'struct timeval' Tina Ruchandani 2016-04-13 8:38 ` Johannes Berg 2016-04-13 8:38 ` Johannes Berg 2016-04-13 9:45 ` Arend Van Spriel 2016-04-13 9:45 ` Arend Van Spriel 2016-04-16 23:34 ` Arnd Bergmann 2016-04-16 23:34 ` Arnd Bergmann 2016-04-17 12:42 ` Johannes Berg 2016-04-17 12:42 ` Johannes Berg 2016-04-17 22:10 ` Arnd Bergmann 2016-04-17 22:10 ` Arnd Bergmann 2016-04-19 8:57 ` Johannes Berg 2016-04-19 8:57 ` Johannes Berg 2016-04-22 18:09 ` Kalle Valo 2016-04-22 18:09 ` Kalle Valo 2016-04-23 1:30 ` Luis R. Rodriguez 2016-04-26 9:10 ` [v3] " Kalle Valo 2016-04-26 9:10 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160413060916.GA21184@localhost \ --to=ruchandani.tina@gmail.com \ --cc=arnd@arndb.de \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=y2038@lists.linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.