[PATCH v4 1/3] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe

[PATCH v4 1/3] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe

[Zhao Qiang]

move the driver from drivers/soc/fsl/qe to drivers/irqchip,
merge qe_ic.h and qe_ic.c into irq-qeic.c.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
Changes for v2:
	- modify the subject and commit msg
Changes for v3:
	- merge .h file to .c, rename it with irq-qeic.c
Changes for v4:
	- modify comments

 drivers/irqchip/Makefile                           |   1 +
 drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} |  95 ++++++++++++++++++-
 drivers/soc/fsl/qe/Makefile                        |   2 +-
 drivers/soc/fsl/qe/qe_ic.h                         | 103 ---------------------
 4 files changed, 94 insertions(+), 107 deletions(-)
 rename drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} (85%)
 delete mode 100644 drivers/soc/fsl/qe/qe_ic.h

diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 38853a1..846b34e 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -69,3 +69,4 @@ obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
 obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
 obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
+obj-$(CONFIG_QUICC_ENGINE)		+= irq-qeic.o
diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/irqchip/irq-qeic.c
similarity index 85%
rename from drivers/soc/fsl/qe/qe_ic.c
rename to drivers/irqchip/irq-qeic.c
index ec2ca86..48ceded 100644
--- a/drivers/soc/fsl/qe/qe_ic.c
+++ b/drivers/irqchip/irq-qeic.c
@@ -1,7 +1,7 @@
 /*
- * arch/powerpc/sysdev/qe_lib/qe_ic.c
+ * drivers/irqchip/irq-qeic.c
  *
- * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.  All rights reserved.
  *
  * Author: Li Yang <leoli@freescale.com>
  * Based on code from Shlomi Gridish <gridish@freescale.com>
@@ -30,7 +30,96 @@
 #include <asm/io.h>
 #include <soc/fsl/qe/qe_ic.h>
 
-#include "qe_ic.h"
+#define NR_QE_IC_INTS		64
+
+/* QE IC registers offset */
+#define QEIC_CICR		0x00
+#define QEIC_CIVEC		0x04
+#define QEIC_CRIPNR		0x08
+#define QEIC_CIPNR		0x0c
+#define QEIC_CIPXCC		0x10
+#define QEIC_CIPYCC		0x14
+#define QEIC_CIPWCC		0x18
+#define QEIC_CIPZCC		0x1c
+#define QEIC_CIMR		0x20
+#define QEIC_CRIMR		0x24
+#define QEIC_CICNR		0x28
+#define QEIC_CIPRTA		0x30
+#define QEIC_CIPRTB		0x34
+#define QEIC_CRICR		0x3c
+#define QEIC_CHIVEC		0x60
+
+/* Interrupt priority registers */
+#define CIPCC_SHIFT_PRI0	29
+#define CIPCC_SHIFT_PRI1	26
+#define CIPCC_SHIFT_PRI2	23
+#define CIPCC_SHIFT_PRI3	20
+#define CIPCC_SHIFT_PRI4	13
+#define CIPCC_SHIFT_PRI5	10
+#define CIPCC_SHIFT_PRI6	7
+#define CIPCC_SHIFT_PRI7	4
+
+/* CICR priority modes */
+#define CICR_GWCC		0x00040000
+#define CICR_GXCC		0x00020000
+#define CICR_GYCC		0x00010000
+#define CICR_GZCC		0x00080000
+#define CICR_GRTA		0x00200000
+#define CICR_GRTB		0x00400000
+#define CICR_HPIT_SHIFT		8
+#define CICR_HPIT_MASK		0x00000300
+#define CICR_HP_SHIFT		24
+#define CICR_HP_MASK		0x3f000000
+
+/* CICNR */
+#define CICNR_WCC1T_SHIFT	20
+#define CICNR_ZCC1T_SHIFT	28
+#define CICNR_YCC1T_SHIFT	12
+#define CICNR_XCC1T_SHIFT	4
+
+/* CRICR */
+#define CRICR_RTA1T_SHIFT	20
+#define CRICR_RTB1T_SHIFT	28
+
+/* Signal indicator */
+#define SIGNAL_MASK		3
+#define SIGNAL_HIGH		2
+#define SIGNAL_LOW		0
+
+struct qe_ic {
+	/* Control registers offset */
+	volatile u32 __iomem *regs;
+
+	/* The remapper for this QEIC */
+	struct irq_domain *irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip hc_irq;
+
+	/* VIRQ numbers of QE high/low irqs */
+	unsigned int virq_high;
+	unsigned int virq_low;
+};
+
+/*
+ * QE interrupt controller internal structure
+ */
+struct qe_ic_info {
+	/* location of this source at the QIMR register. */
+	u32	mask;
+
+	/* Mask register offset */
+	u32	mask_reg;
+
+	/*
+	 * for grouped interrupts sources - the interrupt
+	 * code as appears at the group priority register
+	 */
+	u8	pri_code;
+
+	/* Group priority register offset */
+	u32	pri_reg;
+};
 
 static DEFINE_RAW_SPINLOCK(qe_ic_lock);
 
diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
index 2031d38..51e4726 100644
--- a/drivers/soc/fsl/qe/Makefile
+++ b/drivers/soc/fsl/qe/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux ppc-specific parts of QE
 #
-obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
+obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_io.o
 obj-$(CONFIG_CPM)	+= qe_common.o
 obj-$(CONFIG_UCC)	+= ucc.o
 obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
deleted file mode 100644
index 926a2ed..0000000
--- a/drivers/soc/fsl/qe/qe_ic.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * drivers/soc/fsl/qe/qe_ic.h
- *
- * QUICC ENGINE Interrupt Controller Header
- *
- * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
- *
- * Author: Li Yang <leoli@freescale.com>
- * Based on code from Shlomi Gridish <gridish@freescale.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#ifndef _POWERPC_SYSDEV_QE_IC_H
-#define _POWERPC_SYSDEV_QE_IC_H
-
-#include <soc/fsl/qe/qe_ic.h>
-
-#define NR_QE_IC_INTS		64
-
-/* QE IC registers offset */
-#define QEIC_CICR		0x00
-#define QEIC_CIVEC		0x04
-#define QEIC_CRIPNR		0x08
-#define QEIC_CIPNR		0x0c
-#define QEIC_CIPXCC		0x10
-#define QEIC_CIPYCC		0x14
-#define QEIC_CIPWCC		0x18
-#define QEIC_CIPZCC		0x1c
-#define QEIC_CIMR		0x20
-#define QEIC_CRIMR		0x24
-#define QEIC_CICNR		0x28
-#define QEIC_CIPRTA		0x30
-#define QEIC_CIPRTB		0x34
-#define QEIC_CRICR		0x3c
-#define QEIC_CHIVEC		0x60
-
-/* Interrupt priority registers */
-#define CIPCC_SHIFT_PRI0	29
-#define CIPCC_SHIFT_PRI1	26
-#define CIPCC_SHIFT_PRI2	23
-#define CIPCC_SHIFT_PRI3	20
-#define CIPCC_SHIFT_PRI4	13
-#define CIPCC_SHIFT_PRI5	10
-#define CIPCC_SHIFT_PRI6	7
-#define CIPCC_SHIFT_PRI7	4
-
-/* CICR priority modes */
-#define CICR_GWCC		0x00040000
-#define CICR_GXCC		0x00020000
-#define CICR_GYCC		0x00010000
-#define CICR_GZCC		0x00080000
-#define CICR_GRTA		0x00200000
-#define CICR_GRTB		0x00400000
-#define CICR_HPIT_SHIFT		8
-#define CICR_HPIT_MASK		0x00000300
-#define CICR_HP_SHIFT		24
-#define CICR_HP_MASK		0x3f000000
-
-/* CICNR */
-#define CICNR_WCC1T_SHIFT	20
-#define CICNR_ZCC1T_SHIFT	28
-#define CICNR_YCC1T_SHIFT	12
-#define CICNR_XCC1T_SHIFT	4
-
-/* CRICR */
-#define CRICR_RTA1T_SHIFT	20
-#define CRICR_RTB1T_SHIFT	28
-
-/* Signal indicator */
-#define SIGNAL_MASK		3
-#define SIGNAL_HIGH		2
-#define SIGNAL_LOW		0
-
-struct qe_ic {
-	/* Control registers offset */
-	volatile u32 __iomem *regs;
-
-	/* The remapper for this QEIC */
-	struct irq_domain *irqhost;
-
-	/* The "linux" controller struct */
-	struct irq_chip hc_irq;
-
-	/* VIRQ numbers of QE high/low irqs */
-	unsigned int virq_high;
-	unsigned int virq_low;
-};
-
-/*
- * QE interrupt controller internal structure
- */
-struct qe_ic_info {
-	u32	mask;	  /* location of this source at the QIMR register. */
-	u32	mask_reg; /* Mask register offset */
-	u8	pri_code; /* for grouped interrupts sources - the interrupt
-			     code as appears at the group priority register */
-	u32	pri_reg;  /* Group priority register offset */
-};
-
-#endif /* _POWERPC_SYSDEV_QE_IC_H */
-- 
2.1.0.27.g96db324

[PATCH v4 2/3] irqchip/qeic: merge qeic init code from platforms to a common function

[Zhao Qiang]

The codes of qe_ic init from a variety of platforms are redundant,
merge them to a common function and put it to irqchip/irq-qeic.c

For non-p1021_mds mpc85xx_mds boards, use "qe_ic_init(np, 0,
qe_ic_cascade_low_mpic, qe_ic_cascade_high_mpic);" instead of
"qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);".

qe_ic_cascade_muxed_mpic was used for boards has the same interrupt
number for low interrupt and high interrupt, qe_ic_init has checked
if "low interrupt == high interrupt"

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
Changes for v2:
	- modify subject and commit msg
	- add check for qeic by type
Changes for v3:
	- na
Changes for v4:
	- na

 arch/powerpc/platforms/83xx/misc.c            | 15 ---------------
 arch/powerpc/platforms/85xx/corenet_generic.c |  9 ---------
 arch/powerpc/platforms/85xx/mpc85xx_mds.c     | 14 --------------
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c     | 16 ----------------
 arch/powerpc/platforms/85xx/twr_p102x.c       | 14 --------------
 drivers/irqchip/irq-qeic.c                    | 16 ++++++++++++++++
 6 files changed, 16 insertions(+), 68 deletions(-)

diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
index 7e923ca..9431fc7 100644
--- a/arch/powerpc/platforms/83xx/misc.c
+++ b/arch/powerpc/platforms/83xx/misc.c
@@ -93,24 +93,9 @@ void __init mpc83xx_ipic_init_IRQ(void)
 }
 
 #ifdef CONFIG_QUICC_ENGINE
-void __init mpc83xx_qe_init_IRQ(void)
-{
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
-	of_node_put(np);
-}
-
 void __init mpc83xx_ipic_and_qe_init_IRQ(void)
 {
 	mpc83xx_ipic_init_IRQ();
-	mpc83xx_qe_init_IRQ();
 }
 #endif /* CONFIG_QUICC_ENGINE */
 
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index a2b0bc8..526fc2b 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -41,8 +41,6 @@ void __init corenet_gen_pic_init(void)
 	unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
 		MPIC_NO_RESET;
 
-	struct device_node *np;
-
 	if (ppc_md.get_irq == mpic_get_coreint_irq)
 		flags |= MPIC_ENABLE_COREINT;
 
@@ -50,13 +48,6 @@ void __init corenet_gen_pic_init(void)
 	BUG_ON(mpic == NULL);
 
 	mpic_init(mpic);
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-	}
 }
 
 /*
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index f61cbe2..7ae4901 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -279,20 +279,6 @@ static void __init mpc85xx_mds_qeic_init(void)
 		of_node_put(np);
 		return;
 	}
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-
-	if (machine_is(p1021_mds))
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-	else
-		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
-	of_node_put(np);
 }
 #else
 static void __init mpc85xx_mds_qe_init(void) { }
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 3f4dad1..779f54f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -49,10 +49,6 @@ void __init mpc85xx_rdb_pic_init(void)
 	struct mpic *mpic;
 	unsigned long root = of_get_flat_dt_root();
 
-#ifdef CONFIG_QUICC_ENGINE
-	struct device_node *np;
-#endif
-
 	if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
 		mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
 			MPIC_BIG_ENDIAN |
@@ -67,18 +63,6 @@ void __init mpc85xx_rdb_pic_init(void)
 
 	BUG_ON(mpic == NULL);
 	mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-
-	} else
-		pr_err("%s: Could not find qe-ic node\n", __func__);
-#endif
-
 }
 
 /*
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
index 71bc255..603e244 100644
--- a/arch/powerpc/platforms/85xx/twr_p102x.c
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -35,26 +35,12 @@ static void __init twr_p1025_pic_init(void)
 {
 	struct mpic *mpic;
 
-#ifdef CONFIG_QUICC_ENGINE
-	struct device_node *np;
-#endif
-
 	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 			MPIC_SINGLE_DEST_CPU,
 			0, 256, " OpenPIC  ");
 
 	BUG_ON(mpic == NULL);
 	mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (np) {
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-		of_node_put(np);
-	} else
-		pr_err("Could not find qe-ic node\n");
-#endif
 }
 
 /* ************************************************************************
diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
index 48ceded..1463731 100644
--- a/drivers/irqchip/irq-qeic.c
+++ b/drivers/irqchip/irq-qeic.c
@@ -598,4 +598,20 @@ static int __init init_qe_ic_sysfs(void)
 	return 0;
 }
 
+static int __init qeic_of_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+	qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+		   qe_ic_cascade_high_mpic);
+	of_node_put(np);
+}
+
+subsys_initcall(qeic_of_init);
 subsys_initcall(init_qe_ic_sysfs);
-- 
2.1.0.27.g96db324

[PATCH v4 3/3] irqchip/qeic: merge qeic_of_init into qe_ic_init

[Zhao Qiang]

qeic_of_init just get device_node of qeic from dtb and call qe_ic_init,
pass the device_node to qe_ic_init.
So merge qeic_of_init into qe_ic_init to get the qeic node in
qe_ic_init.

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
Changes for v2:
	- modify subject and commit msg
	- return 0 and add put node when return in qe_ic_init
Changes for v3:
	- na
Changes for v4:
	- na

 drivers/irqchip/irq-qeic.c | 91 +++++++++++++++++++++++++---------------------
 include/soc/fsl/qe/qe_ic.h |  7 ----
 2 files changed, 50 insertions(+), 48 deletions(-)

diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
index 1463731..4f49d4b 100644
--- a/drivers/irqchip/irq-qeic.c
+++ b/drivers/irqchip/irq-qeic.c
@@ -406,27 +406,38 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
 	return irq_linear_revmap(qe_ic->irqhost, irq);
 }
 
-void __init qe_ic_init(struct device_node *node, unsigned int flags,
-		       void (*low_handler)(struct irq_desc *desc),
-		       void (*high_handler)(struct irq_desc *desc))
+static int __init qe_ic_init(unsigned int flags)
 {
+	struct device_node *node;
 	struct qe_ic *qe_ic;
 	struct resource res;
-	u32 temp = 0, ret, high_active = 0;
+	u32 temp = 0, high_active = 0;
+	int ret = 0;
+
+	node = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!node) {
+		node = of_find_node_by_type(NULL, "qeic");
+		if (!node)
+			return -ENODEV;
+	}
 
 	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
-		return;
+	if (ret) {
+		ret = -ENODEV;
+		goto err_put_node;
+	}
 
 	qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL);
-	if (qe_ic == NULL)
-		return;
+	if (qe_ic == NULL) {
+		ret = -ENOMEM;
+		goto err_put_node;
+	}
 
 	qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS,
 					       &qe_ic_host_ops, qe_ic);
 	if (qe_ic->irqhost == NULL) {
-		kfree(qe_ic);
-		return;
+		ret = -ENOMEM;
+		goto err_free_qe_ic;
 	}
 
 	qe_ic->regs = ioremap(res.start, resource_size(&res));
@@ -437,9 +448,9 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	qe_ic->virq_low = irq_of_parse_and_map(node, 1);
 
 	if (qe_ic->virq_low == NO_IRQ) {
-		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
-		kfree(qe_ic);
-		return;
+		pr_err("Failed to map QE_IC low IRQ\n");
+		ret = -ENOMEM;
+		goto err_domain_remove;
 	}
 
 	/* default priority scheme is grouped. If spread mode is    */
@@ -466,13 +477,24 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	qe_ic_write(qe_ic->regs, QEIC_CICR, temp);
 
 	irq_set_handler_data(qe_ic->virq_low, qe_ic);
-	irq_set_chained_handler(qe_ic->virq_low, low_handler);
+	irq_set_chained_handler(qe_ic->virq_low, qe_ic_cascade_low_mpic);
 
 	if (qe_ic->virq_high != NO_IRQ &&
 			qe_ic->virq_high != qe_ic->virq_low) {
 		irq_set_handler_data(qe_ic->virq_high, qe_ic);
-		irq_set_chained_handler(qe_ic->virq_high, high_handler);
+		irq_set_chained_handler(qe_ic->virq_high,
+					qe_ic_cascade_high_mpic);
 	}
+	of_node_put(node);
+	return 0;
+
+err_domain_remove:
+	irq_domain_remove(qe_ic->irqhost);
+err_free_qe_ic:
+	kfree(qe_ic);
+err_put_node:
+	of_node_put(node);
+	return ret;
 }
 
 void qe_ic_set_highest_priority(unsigned int virq, int high)
@@ -579,39 +601,26 @@ static struct device device_qe_ic = {
 	.bus = &qe_ic_subsys,
 };
 
-static int __init init_qe_ic_sysfs(void)
+static int __init init_qe_ic(void)
 {
-	int rc;
+	int ret;
 
-	printk(KERN_DEBUG "Registering qe_ic with sysfs...\n");
+	ret = qe_ic_init(0);
+	if (ret)
+		return ret;
 
-	rc = subsys_system_register(&qe_ic_subsys, NULL);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys class\n");
+	ret = subsys_system_register(&qe_ic_subsys, NULL);
+	if (ret) {
+		pr_err("Failed registering qe_ic sys class\n");
 		return -ENODEV;
 	}
-	rc = device_register(&device_qe_ic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering qe_ic sys device\n");
+	ret = device_register(&device_qe_ic);
+	if (ret) {
+		pr_err("Failed registering qe_ic sys device\n");
 		return -ENODEV;
 	}
-	return 0;
-}
-
-static int __init qeic_of_init(void)
-{
-	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-		   qe_ic_cascade_high_mpic);
-	of_node_put(np);
+	return 0;
 }
 
-subsys_initcall(qeic_of_init);
-subsys_initcall(init_qe_ic_sysfs);
+subsys_initcall(init_qe_ic);
diff --git a/include/soc/fsl/qe/qe_ic.h b/include/soc/fsl/qe/qe_ic.h
index 1e155ca..6113699 100644
--- a/include/soc/fsl/qe/qe_ic.h
+++ b/include/soc/fsl/qe/qe_ic.h
@@ -58,16 +58,9 @@ enum qe_ic_grp_id {
 };
 
 #ifdef CONFIG_QUICC_ENGINE
-void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(struct irq_desc *desc),
-		void (*high_handler)(struct irq_desc *desc));
 unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
 unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
 #else
-static inline void qe_ic_init(struct device_node *node, unsigned int flags,
-		void (*low_handler)(struct irq_desc *desc),
-		void (*high_handler)(struct irq_desc *desc))
-{}
 static inline unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic)
 { return 0; }
 static inline unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
-- 
2.1.0.27.g96db324

Re: [PATCH v4 1/3] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe

[Jason Cooper]

Hi Zhao Qiang,

On Mon, Aug 01, 2016 at 10:53:18AM +0800, Zhao Qiang wrote:
> move the driver from drivers/soc/fsl/qe to drivers/irqchip,
> merge qe_ic.h and qe_ic.c into irq-qeic.c.
> 
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
> Changes for v2:
> 	- modify the subject and commit msg
> Changes for v3:
> 	- merge .h file to .c, rename it with irq-qeic.c
> Changes for v4:
> 	- modify comments
> 
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} |  95 ++++++++++++++++++-
>  drivers/soc/fsl/qe/Makefile                        |   2 +-
>  drivers/soc/fsl/qe/qe_ic.h                         | 103 ---------------------
>  4 files changed, 94 insertions(+), 107 deletions(-)
>  rename drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} (85%)

Could you disable rename detection so that we can review the entire
codebase being brought into drivers/irqchip?

thx,

Jason.

>  delete mode 100644 drivers/soc/fsl/qe/qe_ic.h
> 
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index 38853a1..846b34e 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -69,3 +69,4 @@ obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
>  obj-$(CONFIG_MVEBU_ODMI)		+= irq-mvebu-odmi.o
>  obj-$(CONFIG_LS_SCFG_MSI)		+= irq-ls-scfg-msi.o
>  obj-$(CONFIG_EZNPS_GIC)			+= irq-eznps.o
> +obj-$(CONFIG_QUICC_ENGINE)		+= irq-qeic.o
> diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/irqchip/irq-qeic.c
> similarity index 85%
> rename from drivers/soc/fsl/qe/qe_ic.c
> rename to drivers/irqchip/irq-qeic.c
> index ec2ca86..48ceded 100644
> --- a/drivers/soc/fsl/qe/qe_ic.c
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -1,7 +1,7 @@
>  /*
> - * arch/powerpc/sysdev/qe_lib/qe_ic.c
> + * drivers/irqchip/irq-qeic.c
>   *
> - * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.  All rights reserved.
>   *
>   * Author: Li Yang <leoli@freescale.com>
>   * Based on code from Shlomi Gridish <gridish@freescale.com>
> @@ -30,7 +30,96 @@
>  #include <asm/io.h>
>  #include <soc/fsl/qe/qe_ic.h>
>  
> -#include "qe_ic.h"
> +#define NR_QE_IC_INTS		64
> +
> +/* QE IC registers offset */
> +#define QEIC_CICR		0x00
> +#define QEIC_CIVEC		0x04
> +#define QEIC_CRIPNR		0x08
> +#define QEIC_CIPNR		0x0c
> +#define QEIC_CIPXCC		0x10
> +#define QEIC_CIPYCC		0x14
> +#define QEIC_CIPWCC		0x18
> +#define QEIC_CIPZCC		0x1c
> +#define QEIC_CIMR		0x20
> +#define QEIC_CRIMR		0x24
> +#define QEIC_CICNR		0x28
> +#define QEIC_CIPRTA		0x30
> +#define QEIC_CIPRTB		0x34
> +#define QEIC_CRICR		0x3c
> +#define QEIC_CHIVEC		0x60
> +
> +/* Interrupt priority registers */
> +#define CIPCC_SHIFT_PRI0	29
> +#define CIPCC_SHIFT_PRI1	26
> +#define CIPCC_SHIFT_PRI2	23
> +#define CIPCC_SHIFT_PRI3	20
> +#define CIPCC_SHIFT_PRI4	13
> +#define CIPCC_SHIFT_PRI5	10
> +#define CIPCC_SHIFT_PRI6	7
> +#define CIPCC_SHIFT_PRI7	4
> +
> +/* CICR priority modes */
> +#define CICR_GWCC		0x00040000
> +#define CICR_GXCC		0x00020000
> +#define CICR_GYCC		0x00010000
> +#define CICR_GZCC		0x00080000
> +#define CICR_GRTA		0x00200000
> +#define CICR_GRTB		0x00400000
> +#define CICR_HPIT_SHIFT		8
> +#define CICR_HPIT_MASK		0x00000300
> +#define CICR_HP_SHIFT		24
> +#define CICR_HP_MASK		0x3f000000
> +
> +/* CICNR */
> +#define CICNR_WCC1T_SHIFT	20
> +#define CICNR_ZCC1T_SHIFT	28
> +#define CICNR_YCC1T_SHIFT	12
> +#define CICNR_XCC1T_SHIFT	4
> +
> +/* CRICR */
> +#define CRICR_RTA1T_SHIFT	20
> +#define CRICR_RTB1T_SHIFT	28
> +
> +/* Signal indicator */
> +#define SIGNAL_MASK		3
> +#define SIGNAL_HIGH		2
> +#define SIGNAL_LOW		0
> +
> +struct qe_ic {
> +	/* Control registers offset */
> +	volatile u32 __iomem *regs;
> +
> +	/* The remapper for this QEIC */
> +	struct irq_domain *irqhost;
> +
> +	/* The "linux" controller struct */
> +	struct irq_chip hc_irq;
> +
> +	/* VIRQ numbers of QE high/low irqs */
> +	unsigned int virq_high;
> +	unsigned int virq_low;
> +};
> +
> +/*
> + * QE interrupt controller internal structure
> + */
> +struct qe_ic_info {
> +	/* location of this source at the QIMR register. */
> +	u32	mask;
> +
> +	/* Mask register offset */
> +	u32	mask_reg;
> +
> +	/*
> +	 * for grouped interrupts sources - the interrupt
> +	 * code as appears at the group priority register
> +	 */
> +	u8	pri_code;
> +
> +	/* Group priority register offset */
> +	u32	pri_reg;
> +};
>  
>  static DEFINE_RAW_SPINLOCK(qe_ic_lock);
>  
> diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile
> index 2031d38..51e4726 100644
> --- a/drivers/soc/fsl/qe/Makefile
> +++ b/drivers/soc/fsl/qe/Makefile
> @@ -1,7 +1,7 @@
>  #
>  # Makefile for the linux ppc-specific parts of QE
>  #
> -obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
> +obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_io.o
>  obj-$(CONFIG_CPM)	+= qe_common.o
>  obj-$(CONFIG_UCC)	+= ucc.o
>  obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
> diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h
> deleted file mode 100644
> index 926a2ed..0000000
> --- a/drivers/soc/fsl/qe/qe_ic.h
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -/*
> - * drivers/soc/fsl/qe/qe_ic.h
> - *
> - * QUICC ENGINE Interrupt Controller Header
> - *
> - * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
> - *
> - * Author: Li Yang <leoli@freescale.com>
> - * Based on code from Shlomi Gridish <gridish@freescale.com>
> - *
> - * This program is free software; you can redistribute  it and/or modify it
> - * under  the terms of  the GNU General  Public License as published by the
> - * Free Software Foundation;  either version 2 of the  License, or (at your
> - * option) any later version.
> - */
> -#ifndef _POWERPC_SYSDEV_QE_IC_H
> -#define _POWERPC_SYSDEV_QE_IC_H
> -
> -#include <soc/fsl/qe/qe_ic.h>
> -
> -#define NR_QE_IC_INTS		64
> -
> -/* QE IC registers offset */
> -#define QEIC_CICR		0x00
> -#define QEIC_CIVEC		0x04
> -#define QEIC_CRIPNR		0x08
> -#define QEIC_CIPNR		0x0c
> -#define QEIC_CIPXCC		0x10
> -#define QEIC_CIPYCC		0x14
> -#define QEIC_CIPWCC		0x18
> -#define QEIC_CIPZCC		0x1c
> -#define QEIC_CIMR		0x20
> -#define QEIC_CRIMR		0x24
> -#define QEIC_CICNR		0x28
> -#define QEIC_CIPRTA		0x30
> -#define QEIC_CIPRTB		0x34
> -#define QEIC_CRICR		0x3c
> -#define QEIC_CHIVEC		0x60
> -
> -/* Interrupt priority registers */
> -#define CIPCC_SHIFT_PRI0	29
> -#define CIPCC_SHIFT_PRI1	26
> -#define CIPCC_SHIFT_PRI2	23
> -#define CIPCC_SHIFT_PRI3	20
> -#define CIPCC_SHIFT_PRI4	13
> -#define CIPCC_SHIFT_PRI5	10
> -#define CIPCC_SHIFT_PRI6	7
> -#define CIPCC_SHIFT_PRI7	4
> -
> -/* CICR priority modes */
> -#define CICR_GWCC		0x00040000
> -#define CICR_GXCC		0x00020000
> -#define CICR_GYCC		0x00010000
> -#define CICR_GZCC		0x00080000
> -#define CICR_GRTA		0x00200000
> -#define CICR_GRTB		0x00400000
> -#define CICR_HPIT_SHIFT		8
> -#define CICR_HPIT_MASK		0x00000300
> -#define CICR_HP_SHIFT		24
> -#define CICR_HP_MASK		0x3f000000
> -
> -/* CICNR */
> -#define CICNR_WCC1T_SHIFT	20
> -#define CICNR_ZCC1T_SHIFT	28
> -#define CICNR_YCC1T_SHIFT	12
> -#define CICNR_XCC1T_SHIFT	4
> -
> -/* CRICR */
> -#define CRICR_RTA1T_SHIFT	20
> -#define CRICR_RTB1T_SHIFT	28
> -
> -/* Signal indicator */
> -#define SIGNAL_MASK		3
> -#define SIGNAL_HIGH		2
> -#define SIGNAL_LOW		0
> -
> -struct qe_ic {
> -	/* Control registers offset */
> -	volatile u32 __iomem *regs;
> -
> -	/* The remapper for this QEIC */
> -	struct irq_domain *irqhost;
> -
> -	/* The "linux" controller struct */
> -	struct irq_chip hc_irq;
> -
> -	/* VIRQ numbers of QE high/low irqs */
> -	unsigned int virq_high;
> -	unsigned int virq_low;
> -};
> -
> -/*
> - * QE interrupt controller internal structure
> - */
> -struct qe_ic_info {
> -	u32	mask;	  /* location of this source at the QIMR register. */
> -	u32	mask_reg; /* Mask register offset */
> -	u8	pri_code; /* for grouped interrupts sources - the interrupt
> -			     code as appears at the group priority register */
> -	u32	pri_reg;  /* Group priority register offset */
> -};
> -
> -#endif /* _POWERPC_SYSDEV_QE_IC_H */
> -- 
> 2.1.0.27.g96db324
>