From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@free-electrons.com>
Subject: [PATCH v3 4/5] ARM: dts: at91: sama5d4: use proper sckc compatible
Date: Tue, 20 Sep 2016 22:58:32 +0200 [thread overview]
Message-ID: <20160920205833.19638-5-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20160920205833.19638-1-alexandre.belloni@free-electrons.com>
Now that there is support for the sama5d4 slow clock controller, use its
driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/sama5d4.dtsi | 27 ++++-----------------------
1 file changed, 4 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 65e725fb5679..fe094263595c 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1314,30 +1314,11 @@
status = "disabled";
};
- sckc@fc068650 {
- compatible = "atmel,at91sam9x5-sckc";
+ clk32k: sckc@fc068650 {
+ compatible = "atmel,sama5d4-sckc";
reg = <0xfc068650 0x4>;
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <250000000>;
- atmel,startup-time-usec = <75>;
- };
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- atmel,startup-time-usec = <1200000>;
- };
-
- clk32k: slowck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
};
rtc@fc0686b0 {
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/5] ARM: dts: at91: sama5d4: use proper sckc compatible
Date: Tue, 20 Sep 2016 22:58:32 +0200 [thread overview]
Message-ID: <20160920205833.19638-5-alexandre.belloni@free-electrons.com> (raw)
In-Reply-To: <20160920205833.19638-1-alexandre.belloni@free-electrons.com>
Now that there is support for the sama5d4 slow clock controller, use its
driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/arm/boot/dts/sama5d4.dtsi | 27 ++++-----------------------
1 file changed, 4 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 65e725fb5679..fe094263595c 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -1314,30 +1314,11 @@
status = "disabled";
};
- sckc at fc068650 {
- compatible = "atmel,at91sam9x5-sckc";
+ clk32k: sckc at fc068650 {
+ compatible = "atmel,sama5d4-sckc";
reg = <0xfc068650 0x4>;
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <250000000>;
- atmel,startup-time-usec = <75>;
- };
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- atmel,startup-time-usec = <1200000>;
- };
-
- clk32k: slowck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ #clock-cells = <0>;
+ clocks = <&slow_xtal>;
};
rtc at fc0686b0 {
--
2.9.3
next prev parent reply other threads:[~2016-09-20 20:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-20 20:58 [PATCH v3 0/5] AT91: sckc improvements Alexandre Belloni
2016-09-20 20:58 ` Alexandre Belloni
2016-09-20 20:58 ` [PATCH v3 1/5] clk: at91: move slow clock controller clocks to sckc.c Alexandre Belloni
2016-09-20 20:58 ` Alexandre Belloni
2016-09-21 0:02 ` Stephen Boyd
2016-09-21 0:02 ` Stephen Boyd
2016-09-21 8:03 ` Alexandre Belloni
2016-09-21 8:03 ` Alexandre Belloni
2016-09-20 20:58 ` [PATCH v3 2/5] clk: at91: Add sama5d4 sckc support Alexandre Belloni
2016-09-20 20:58 ` Alexandre Belloni
2016-09-21 0:04 ` Stephen Boyd
2016-09-21 0:04 ` Stephen Boyd
2016-09-20 20:58 ` [PATCH v3 3/5] clk: at91: sckc: optimize boot time Alexandre Belloni
2016-09-20 20:58 ` Alexandre Belloni
2016-09-21 0:04 ` Stephen Boyd
2016-09-21 0:04 ` Stephen Boyd
2016-09-20 20:58 ` Alexandre Belloni [this message]
2016-09-20 20:58 ` [PATCH v3 4/5] ARM: dts: at91: sama5d4: use proper sckc compatible Alexandre Belloni
2016-09-20 20:58 ` [PATCH v3 5/5] ARM: dts: at91: sama5d2: use correct " Alexandre Belloni
2016-09-20 20:58 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160920205833.19638-5-alexandre.belloni@free-electrons.com \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@atmel.com \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.