From: Ondrej Zary <linux@rainbow-software.org>
To: Sinan Kaya <okaya@codeaurora.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
Date: Wed, 28 Sep 2016 10:32:34 +0200 [thread overview]
Message-ID: <201609281032.35190.linux@rainbow-software.org> (raw)
In-Reply-To: <d3fd8f7a-520d-d204-87d8-e9f59fb8f180@codeaurora.org>
On Wednesday 28 September 2016, Sinan Kaya wrote:
> On 9/27/2016 6:58 PM, Rafael J. Wysocki wrote:
> >> :040000 040000 9bf16c388d23bb66e087809f069eafed18e46a8c
> >> : bcac95fb33ee834aec7d23eab9eb0dc5e330c68c M drivers
> >
> > OK
> >
> > Sinan, can you help, please?
>
> Sure, let's see what's going on. I was writing an email.
>
> Can we apply this and collect the kernel log? It also helps to see the
> kernel log from a working combination.
This is from yet another machine with the same problem:
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #100 SMP Wed Sep 28 10:19:26 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000006ffbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000006ffc000-0x0000000006ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000006fff000-0x0000000006ffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/A7VL133, BIOS ASUS A7VL133-VM ACPI BIOS Revision 1008 06/10/2002
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x6ffc max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FFC000000 write-back
[ 0.000000] 1 base 004000000 mask FFE000000 write-back
[ 0.000000] 2 base 006000000 mask FFF000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6DA0 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x0000000006FFC000 00002C (v01 ASUS A7VL133 30303031 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x0000000006FFC080 000074 (v01 ASUS A7VL133 30303031 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x0000000006FFC100 0027F0 (v01 ASUS A7VL133 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 0x0000000006FFF000 000040
[ 0.000000] ACPI: BOOT 0x0000000006FFC040 000028 (v01 ASUS A7VL133 30303031 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 111MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 06ffc000
[ 0.000000] low ram: 0 - 06ffc000
[ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000006ffbfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000006ffbfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000006ffbfff]
[ 0.000000] On node 0 totalpages: 28570
[ 0.000000] free_area_init_node: node 0, pgdat c15b1840, node_mem_map c6f1c020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 192 pages used for memmap
[ 0.000000] Normal zone: 24572 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x07000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @c6f06000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28346
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda1 ro quiet
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 106224K/114280K available (3918K kernel code, 436K rwdata, 1520K rodata, 524K init, 412K bss, 8056K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xc77fc000 - 0xff7fe000 ( 896 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc6ffc000 ( 111 MB)
[ 0.000000] .init : 0xc15c1000 - 0xc1644000 ( 524 kB)
[ 0.000000] .data : 0xc13d3cc1 - 0xc15bf2e0 (1965 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13d3cc1 (3919 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=c681c000 soft=c681e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 857.600 MHz processor
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1715.20 BogoMIPS (lpj=3430400)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004068] ACPI: Core revision 20160422
[ 0.010184] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.010197]
[ 0.010206] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.010294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010300] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.011345] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.011355] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.017561] Freeing SMP alternatives memory: 16K (c1644000 - c1648000)
[ 0.018157] smpboot: Max logical packages: 1
[ 0.018168] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.018171] smpboot: SMP motherboard not detected
[ 0.018173] smpboot: SMP disabled
[ 0.018181] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.018187] Performance Events:
[ 0.018197] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.018200] no hardware sampling interrupt available.
[ 0.018207] AMD PMU driver.
[ 0.018218] ... version: 0
[ 0.018222] ... bit width: 48
[ 0.018224] ... generic registers: 4
[ 0.018227] ... value mask: 0000ffffffffffff
[ 0.018230] ... max period: 00007fffffffffff
[ 0.018233] ... fixed-purpose events: 0
[ 0.018236] ... event mask: 000000000000000f
[ 0.019597] x86: Booted up 1 node, 1 CPUs
[ 0.019609] smpboot: Total of 1 processors activated (1715.20 BogoMIPS)
[ 0.020276] devtmpfs: initialized
[ 0.021405] PM: Registering ACPI NVS region [mem 0x06fff000-0x06ffffff] (4096 bytes)
[ 0.021676] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.022170] NET: Registered protocol family 16
[ 0.022847] cpuidle: using governor ladder
[ 0.022857] cpuidle: using governor menu
[ 0.022964] Simple Boot Flag at 0x3a set to 0x1
[ 0.022988] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.023009] ACPI: bus type PCI registered
[ 0.029726] PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
[ 0.029734] PCI: Using configuration type 1 for base access
[ 0.035763] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.036523] ACPI: Added _OSI(Module Device)
[ 0.036530] ACPI: Added _OSI(Processor Device)
[ 0.036534] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.036538] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040657] ACPI: Interpreter enabled
[ 0.040744] ACPI: (supports S0 S1 S4 S5)
[ 0.040753] ACPI: Using PIC for interrupt routing
[ 0.040871] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.054034] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.054245] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.054444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.054640] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.054855] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.054877] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.054898] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.054914] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.055070] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.055077] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.055085] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.055092] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.055097] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.055104] acpi PNP0A03:00: host bridge window [mem 0x07000000-0xffffffff window] (ignored)
[ 0.055108] PCI: root bus 00: using default resources
[ 0.055345] PCI host bridge to bus 0000:00
[ 0.055354] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.055361] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.055371] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.055417] pci 0000:00:00.0: [1106:0305] type 00 class 0x060000
[ 0.055444] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.055810] pci 0000:00:01.0: [1106:8305] type 01 class 0x060400
[ 0.055872] pci 0000:00:01.0: supports D1
[ 0.056082] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.056321] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100
[ 0.056689] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a
[ 0.056741] pci 0000:00:07.1: reg 0x20: [io 0xd800-0xd80f]
[ 0.056766] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.056771] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.056777] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.056782] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.057053] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300
[ 0.057100] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f]
[ 0.057243] pci 0000:00:07.2: System wakeup disabled by ACPI
[ 0.057436] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300
[ 0.057482] pci 0000:00:07.3: reg 0x20: [io 0xd000-0xd01f]
[ 0.057625] pci 0000:00:07.3: System wakeup disabled by ACPI
[ 0.057836] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000
[ 0.057912] pci 0000:00:07.4: quirk: [io 0xe200-0xe27f] claimed by vt82c686 HW-mon
[ 0.057920] pci 0000:00:07.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB
[ 0.058190] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100
[ 0.058211] pci 0000:00:07.5: reg 0x10: [io 0xb800-0xb8ff]
[ 0.058224] pci 0000:00:07.5: reg 0x14: [io 0xb400-0xb403]
[ 0.058237] pci 0000:00:07.5: reg 0x18: [io 0xb000-0xb003]
[ 0.058555] pci 0000:00:0e.0: [10ec:8139] type 00 class 0x020000
[ 0.058576] pci 0000:00:0e.0: reg 0x10: [io 0xa400-0xa4ff]
[ 0.058590] pci 0000:00:0e.0: reg 0x14: [mem 0xee800000-0xee8000ff]
[ 0.058631] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
[ 0.058671] pci 0000:00:0e.0: supports D1 D2
[ 0.058677] pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
[ 0.059066] pci 0000:01:00.0: [5333:8a26] type 00 class 0x030000
[ 0.059088] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef07ffff]
[ 0.059101] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.059140] pci 0000:01:00.0: reg 0x30: [mem 0xefff0000-0xefffffff pref]
[ 0.059187] pci 0000:01:00.0: supports D1 D2
[ 0.059361] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.059372] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff]
[ 0.059381] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.059394] pci_bus 0000:00: on NUMA node 0
[ 0.062505] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.062519] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.062522] vgaarb: loaded
[ 0.062526] vgaarb: bridge control possible 0000:01:00.0
[ 0.062863] SCSI subsystem initialized
[ 0.063130] libata version 3.00 loaded.
[ 0.063166] ACPI: bus type USB registered
[ 0.063311] usbcore: registered new interface driver usbfs
[ 0.063363] usbcore: registered new interface driver hub
[ 0.063430] usbcore: registered new device driver usb
[ 0.063583] PCI: Using ACPI for IRQ routing
[ 0.063597] PCI: pci_cache_line_size set to 32 bytes
[ 0.063658] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.063666] e820: reserve RAM buffer [mem 0x06ffc000-0x07ffffff]
[ 0.065228] clocksource: Switched to clocksource pit
[ 0.089545] pnp: PnP ACPI init
[ 0.090193] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.090206] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.090213] system 00:00: [mem 0x00100000-0x06ffffff] could not be reserved
[ 0.090221] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.090228] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.090247] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.090961] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.090972] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.090988] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091223] system 00:02: [io 0xe400-0xe47f] has been reserved
[ 0.091232] system 00:02: [io 0xe800-0xe80f] has been reserved
[ 0.091239] system 00:02: [io 0xe200-0xe27f] has been reserved
[ 0.091249] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091507] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[8]=0x110000 active = 1
[ 0.091628] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.092009] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11005c active = 1
[ 0.092019] pnp 00:04: [dma 2]
[ 0.092052] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11105c active = 0
[ 0.092162] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.092939] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11005c active = 1
[ 0.092947] pnp 00:05: [dma 3]
[ 0.092992] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1105c active = 0
[ 0.092997] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11105c active = 0
[ 0.093019] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1205c active = 0
[ 0.093023] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11205c active = 0
[ 0.093044] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1305c active = 0
[ 0.093049] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11305c active = 0
[ 0.093167] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.093653] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11005c active = 1
[ 0.093691] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11105c active = 0
[ 0.093705] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1105c active = 0
[ 0.093719] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11205c active = 0
[ 0.093732] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1205c active = 0
[ 0.093745] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1305c active = 0
[ 0.093750] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11305c active = 0
[ 0.093754] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1405c active = 0
[ 0.093758] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11405c active = 0
[ 0.093763] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x105c active = 0
[ 0.093767] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10105c active = 0
[ 0.093927] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.094485] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11305c active = 1
[ 0.094521] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11405c active = 0
[ 0.094535] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11405c active = 0
[ 0.094548] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11505c active = 0
[ 0.094561] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11505c active = 0
[ 0.094574] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11605c active = 0
[ 0.094579] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11605c active = 0
[ 0.094583] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1505c active = 0
[ 0.094587] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11505c active = 0
[ 0.094592] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x205c active = 0
[ 0.094596] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10205c active = 0
[ 0.094735] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.095186] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[1]=0x1100000 active = 1
[ 0.095309] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.095458] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20205c active = 1
[ 0.095560] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.095767] pnp: PnP ACPI: found 10 devices
[ 0.095783] PnPBIOS: Disabled
[ 0.138561] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.138631] clocksource: Switched to clocksource acpi_pm
[ 0.138719] pci 0000:00:0e.0: BAR 6: assigned [mem 0x08000000-0x08007fff pref]
[ 0.138733] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138746] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff]
[ 0.138809] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.138825] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.138831] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.138839] pci_bus 0000:01: resource 1 [mem 0xef000000-0xefdfffff]
[ 0.138845] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref]
[ 0.138987] NET: Registered protocol family 2
[ 0.139741] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.139775] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.139823] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.139978] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.140121] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.140394] NET: Registered protocol family 1
[ 0.140472] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.140485] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.140500] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.140936] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.140942] penalty[15] = 0x10005c
[ 0.140944] penalty[14] = 0x10005c
[ 0.140947] penalty[12] = 0x20205c
[ 0.140950] penalty[11] = 0x5c
[ 0.140953] penalty[10] = 0x205c
[ 0.140957] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.140960] penalty[9] = 0x100005c
[ 0.140962] penalty[7] = 0x11505c
[ 0.140966] penalty[6] = 0x11105c
[ 0.140969] penalty[5] = 0x1505c
[ 0.140971] penalty[4] = 0x11605c
[ 0.140974] penalty[3] = 0x11605c
[ 0.140978] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.141058] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.141068] pci 0000:00:07.2: PCI INT D: no GSI
[ 0.141312] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.141316] penalty[15] = 0x10005c
[ 0.141319] penalty[14] = 0x10005c
[ 0.141321] penalty[12] = 0x20205c
[ 0.141324] penalty[11] = 0x5c
[ 0.141327] penalty[10] = 0x205c
[ 0.141330] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.141333] penalty[9] = 0x100005c
[ 0.141336] penalty[7] = 0x11505c
[ 0.141338] penalty[6] = 0x11105c
[ 0.141341] penalty[5] = 0x1505c
[ 0.141344] penalty[4] = 0x11605c
[ 0.141348] penalty[3] = 0x11605c
[ 0.141351] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.141409] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.141415] pci 0000:00:07.3: PCI INT D: no GSI
[ 0.141478] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.141483] PCI: CLS 32 bytes, default 32
[ 0.143494] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.145297] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.159183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.159199] io scheduler noop registered
[ 0.159202] io scheduler deadline registered
[ 0.159355] io scheduler cfq registered (default)
[ 0.160660] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.160679] ACPI: Power Button [PWRB]
[ 0.160964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.160970] ACPI: Power Button [PWRF]
[ 0.161146] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.161338] Warning: Processor Platform Limit event detected, but not handled.
[ 0.161341] Consider compiling CPUfreq support into your kernel.
[ 0.162248] isapnp: Scanning for PnP cards...
[ 0.517039] isapnp: No Plug & Play device found
[ 0.517342] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.538160] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.559014] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.560699] Non-volatile memory driver v1.3
[ 0.560710] Linux agpgart interface v0.103
[ 0.560832] [drm] Initialized drm 1.1.0 20060810
[ 0.571352] loop: module loaded
[ 0.571762] pata_via 0000:00:07.1: version 0.3.4
[ 0.574838] scsi host0: pata_via
[ 0.575344] scsi host1: pata_via
[ 0.575585] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14
[ 0.575594] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15
[ 0.575826] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.575835] 8139cp 0000:00:0e.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.575919] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.577052] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.577062] PCI: setting IRQ 10 as level-triggered
[ 0.578035] 8139too 0000:00:0e.0 eth0: RealTek RTL8139 at 0x0001a400, 00:40:95:08:18:34, IRQ 10
[ 0.578127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.578131] ehci-pci: EHCI PCI platform driver
[ 0.578206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.578248] ohci-pci: OHCI PCI platform driver
[ 0.578299] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.578691] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.578697] penalty[15] = 0x10005c
[ 0.578700] penalty[14] = 0x10005c
[ 0.578703] penalty[12] = 0x20205c
[ 0.578705] penalty[11] = 0x5c
[ 0.578708] penalty[10] = 0x205c
[ 0.578712] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.578715] penalty[9] = 0x100005c
[ 0.578718] penalty[7] = 0x11505c
[ 0.578720] penalty[6] = 0x11105c
[ 0.578723] penalty[5] = 0x1505c
[ 0.578725] penalty[4] = 0x11605c
[ 0.578728] penalty[3] = 0x11605c
[ 0.578732] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.578808] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.578816] uhci_hcd 0000:00:07.2: PCI INT D: no GSI
[ 0.578860] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.578909] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 0.578984] uhci_hcd 0000:00:07.2: irq 9, io base 0x0000d400
[ 0.580387] hub 1-0:1.0: USB hub found
[ 0.580465] hub 1-0:1.0: 2 ports detected
[ 0.581316] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.581326] penalty[15] = 0x10005c
[ 0.581329] penalty[14] = 0x10005c
[ 0.581332] penalty[12] = 0x20205c
[ 0.581334] penalty[11] = 0x5c
[ 0.581337] penalty[10] = 0x205c
[ 0.581341] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.581344] penalty[9] = 0x100005c
[ 0.581346] penalty[7] = 0x11505c
[ 0.581349] penalty[6] = 0x11105c
[ 0.581352] penalty[5] = 0x1505c
[ 0.581354] penalty[4] = 0x11605c
[ 0.581357] penalty[3] = 0x11605c
[ 0.581361] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.581438] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.581446] uhci_hcd 0000:00:07.3: PCI INT D: no GSI
[ 0.581486] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 0.581516] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 0.581586] uhci_hcd 0000:00:07.3: irq 9, io base 0x0000d000
[ 0.582600] hub 2-0:1.0: USB hub found
[ 0.582638] hub 2-0:1.0: 2 ports detected
[ 0.583338] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.583973] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.584010] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.584986] mousedev: PS/2 mouse device common for all mice
[ 0.585896] rtc_cmos 00:03: RTC can wake from S4
[ 0.586419] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.586512] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 0.587333] NET: Registered protocol family 17
[ 0.587494] Using IPI No-Shortcut mode
[ 0.588475] registered taskstats version 1
[ 0.589475] rtc_cmos 00:03: setting system clock to 2016-09-28 08:21:05 UTC (1475050865)
[ 0.589623] PM: Hibernation image not present or could not be loaded.
[ 0.616362] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.738820] ata1.00: ATA-4: ST33210A, 3.02, max UDMA/33
[ 0.738831] ata1.00: 6346368 sectors, multi 16: LBA
[ 0.743732] ata1.00: configured for UDMA/33
[ 0.744539] scsi 0:0:0:0: Direct-Access ATA ST33210A 3.02 PQ: 0 ANSI: 5
[ 0.745531] sd 0:0:0:0: [sda] 6346368 512-byte logical blocks: (3.25 GB/3.03 GiB)
[ 0.745740] sd 0:0:0:0: [sda] Write Protect is off
[ 0.745749] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.745835] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.772855] sda: sda1 sda2 < sda5 >
[ 0.774617] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.078722] random: fast init done
[ 1.152069] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xc5c9f0f1ca, max_idle_ns: 440795218091 ns
[ 2.211907] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[ 2.234159] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 2.271764] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.271839] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 2.274668] Freeing unused kernel memory: 524K (c15c1000 - c1644000)
[ 2.274995] Write protecting the kernel text: 3920k
[ 2.275086] Write protecting the kernel read-only data: 1528k
[ 4.398129] udevd (114): /proc/114/oom_adj is deprecated, please use /proc/114/oom_score_adj instead.
[ 5.637243] random: crng init done
[ 6.630603] Adding 112416k swap on /dev/sda5. Priority:-1 extents:1 across:112416k
[ 6.653208] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.122483] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.045160] 8139too 0000:00:0e.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
No IRQ problems when I move the ethernet card to another PCI slot:
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #100 SMP Wed Sep 28 10:19:26 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000006ffbfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000006ffc000-0x0000000006ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000006fff000-0x0000000006ffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/A7VL133, BIOS ASUS A7VL133-VM ACPI BIOS Revision 1008 06/10/2002
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x6ffc max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FFC000000 write-back
[ 0.000000] 1 base 004000000 mask FFE000000 write-back
[ 0.000000] 2 base 006000000 mask FFF000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6DA0 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x0000000006FFC000 00002C (v01 ASUS A7VL133 30303031 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x0000000006FFC080 000074 (v01 ASUS A7VL133 30303031 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x0000000006FFC100 0027F0 (v01 ASUS A7VL133 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 0x0000000006FFF000 000040
[ 0.000000] ACPI: BOOT 0x0000000006FFC040 000028 (v01 ASUS A7VL133 30303031 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 111MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 06ffc000
[ 0.000000] low ram: 0 - 06ffc000
[ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x0000000006ffbfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000006ffbfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000006ffbfff]
[ 0.000000] On node 0 totalpages: 28570
[ 0.000000] free_area_init_node: node 0, pgdat c15b1840, node_mem_map c6f1c020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 192 pages used for memmap
[ 0.000000] Normal zone: 24572 pages, LIFO batch:3
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x07000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @c6f06000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 28346
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda1 ro quiet
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 106224K/114280K available (3918K kernel code, 436K rwdata, 1520K rodata, 524K init, 412K bss, 8056K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xc77fc000 - 0xff7fe000 ( 896 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc6ffc000 ( 111 MB)
[ 0.000000] .init : 0xc15c1000 - 0xc1644000 ( 524 kB)
[ 0.000000] .data : 0xc13d3cc1 - 0xc15bf2e0 (1965 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13d3cc1 (3919 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=c681c000 soft=c681e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 857.704 MHz processor
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 1715.40 BogoMIPS (lpj=3430816)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004071] ACPI: Core revision 20160422
[ 0.010224] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.010240]
[ 0.010249] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.010344] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010350] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.011572] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.011582] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.017658] Freeing SMP alternatives memory: 16K (c1644000 - c1648000)
[ 0.018159] smpboot: Max logical packages: 1
[ 0.018167] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.018170] smpboot: SMP motherboard not detected
[ 0.018172] smpboot: SMP disabled
[ 0.018178] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.018184] Performance Events:
[ 0.018192] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.018195] no hardware sampling interrupt available.
[ 0.018201] AMD PMU driver.
[ 0.018210] ... version: 0
[ 0.018213] ... bit width: 48
[ 0.018215] ... generic registers: 4
[ 0.018218] ... value mask: 0000ffffffffffff
[ 0.018221] ... max period: 00007fffffffffff
[ 0.018224] ... fixed-purpose events: 0
[ 0.018227] ... event mask: 000000000000000f
[ 0.019460] x86: Booted up 1 node, 1 CPUs
[ 0.019474] smpboot: Total of 1 processors activated (1715.40 BogoMIPS)
[ 0.020170] devtmpfs: initialized
[ 0.021311] PM: Registering ACPI NVS region [mem 0x06fff000-0x06ffffff] (4096 bytes)
[ 0.021593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.022112] NET: Registered protocol family 16
[ 0.022794] cpuidle: using governor ladder
[ 0.022802] cpuidle: using governor menu
[ 0.022914] Simple Boot Flag at 0x3a set to 0x1
[ 0.022940] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.022963] ACPI: bus type PCI registered
[ 0.029946] PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
[ 0.029952] PCI: Using configuration type 1 for base access
[ 0.036035] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.036762] ACPI: Added _OSI(Module Device)
[ 0.036768] ACPI: Added _OSI(Processor Device)
[ 0.036772] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.036776] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.040978] ACPI: Interpreter enabled
[ 0.041065] ACPI: (supports S0 S1 S4 S5)
[ 0.041072] ACPI: Using PIC for interrupt routing
[ 0.041182] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.054351] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.054571] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.054775] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.054972] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.055186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.055207] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.055228] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.055244] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.055399] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.055406] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.055412] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.055419] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.055424] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.055431] acpi PNP0A03:00: host bridge window [mem 0x07000000-0xffffffff window] (ignored)
[ 0.055435] PCI: root bus 00: using default resources
[ 0.055669] PCI host bridge to bus 0000:00
[ 0.055679] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.055685] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.055694] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.055738] pci 0000:00:00.0: [1106:0305] type 00 class 0x060000
[ 0.055763] pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[ 0.056254] pci 0000:00:01.0: [1106:8305] type 01 class 0x060400
[ 0.056324] pci 0000:00:01.0: supports D1
[ 0.056430] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.056648] pci 0000:00:07.0: [1106:0686] type 00 class 0x060100
[ 0.056992] pci 0000:00:07.1: [1106:0571] type 00 class 0x01018a
[ 0.057044] pci 0000:00:07.1: reg 0x20: [io 0xd800-0xd80f]
[ 0.057069] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.057074] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.057079] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.057085] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.057350] pci 0000:00:07.2: [1106:3038] type 00 class 0x0c0300
[ 0.057398] pci 0000:00:07.2: reg 0x20: [io 0xd400-0xd41f]
[ 0.057534] pci 0000:00:07.2: System wakeup disabled by ACPI
[ 0.057726] pci 0000:00:07.3: [1106:3038] type 00 class 0x0c0300
[ 0.057772] pci 0000:00:07.3: reg 0x20: [io 0xd000-0xd01f]
[ 0.057911] pci 0000:00:07.3: System wakeup disabled by ACPI
[ 0.058114] pci 0000:00:07.4: [1106:3057] type 00 class 0x068000
[ 0.058189] pci 0000:00:07.4: quirk: [io 0xe200-0xe27f] claimed by vt82c686 HW-mon
[ 0.058198] pci 0000:00:07.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB
[ 0.058459] pci 0000:00:07.5: [1106:3058] type 00 class 0x040100
[ 0.058480] pci 0000:00:07.5: reg 0x10: [io 0xb800-0xb8ff]
[ 0.058493] pci 0000:00:07.5: reg 0x14: [io 0xb400-0xb403]
[ 0.058506] pci 0000:00:07.5: reg 0x18: [io 0xb000-0xb003]
[ 0.058826] pci 0000:00:0f.0: [10ec:8139] type 00 class 0x020000
[ 0.058847] pci 0000:00:0f.0: reg 0x10: [io 0xa400-0xa4ff]
[ 0.058860] pci 0000:00:0f.0: reg 0x14: [mem 0xee800000-0xee8000ff]
[ 0.058901] pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x00007fff pref]
[ 0.058940] pci 0000:00:0f.0: supports D1 D2
[ 0.058946] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold
[ 0.059325] pci 0000:01:00.0: [5333:8a26] type 00 class 0x030000
[ 0.059346] pci 0000:01:00.0: reg 0x10: [mem 0xef000000-0xef07ffff]
[ 0.059359] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.059398] pci 0000:01:00.0: reg 0x30: [mem 0xefff0000-0xefffffff pref]
[ 0.059445] pci 0000:01:00.0: supports D1 D2
[ 0.059621] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.059632] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff]
[ 0.059642] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.059655] pci_bus 0000:00: on NUMA node 0
[ 0.062726] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.062738] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.062740] vgaarb: loaded
[ 0.062744] vgaarb: bridge control possible 0000:01:00.0
[ 0.063093] SCSI subsystem initialized
[ 0.063371] libata version 3.00 loaded.
[ 0.063409] ACPI: bus type USB registered
[ 0.063558] usbcore: registered new interface driver usbfs
[ 0.063611] usbcore: registered new interface driver hub
[ 0.063680] usbcore: registered new device driver usb
[ 0.063831] PCI: Using ACPI for IRQ routing
[ 0.063845] PCI: pci_cache_line_size set to 32 bytes
[ 0.063909] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.063917] e820: reserve RAM buffer [mem 0x06ffc000-0x07ffffff]
[ 0.065500] clocksource: Switched to clocksource pit
[ 0.089303] pnp: PnP ACPI init
[ 0.089966] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.089980] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.089987] system 00:00: [mem 0x00100000-0x06ffffff] could not be reserved
[ 0.089994] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.090001] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.090019] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.090752] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.090762] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.090779] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091016] system 00:02: [io 0xe400-0xe47f] has been reserved
[ 0.091024] system 00:02: [io 0xe800-0xe80f] has been reserved
[ 0.091031] system 00:02: [io 0xe200-0xe27f] has been reserved
[ 0.091041] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091311] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[8]=0x110000 active = 1
[ 0.091433] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.091820] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11005c active = 1
[ 0.091830] pnp 00:04: [dma 2]
[ 0.091863] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11105c active = 0
[ 0.091975] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.092749] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11005c active = 1
[ 0.092757] pnp 00:05: [dma 3]
[ 0.092802] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1105c active = 0
[ 0.092807] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11105c active = 0
[ 0.092830] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1205c active = 0
[ 0.092835] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11205c active = 0
[ 0.092858] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1305c active = 0
[ 0.092863] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11305c active = 0
[ 0.092985] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.093472] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11005c active = 1
[ 0.093511] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11105c active = 0
[ 0.093526] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1105c active = 0
[ 0.093539] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11205c active = 0
[ 0.093552] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1205c active = 0
[ 0.093565] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1305c active = 0
[ 0.093570] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11305c active = 0
[ 0.093574] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1405c active = 0
[ 0.093579] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11405c active = 0
[ 0.093583] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x105c active = 0
[ 0.093588] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10105c active = 0
[ 0.093748] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.094311] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11305c active = 1
[ 0.094349] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11405c active = 0
[ 0.094364] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11405c active = 0
[ 0.094377] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11505c active = 0
[ 0.094390] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11505c active = 0
[ 0.094403] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x11605c active = 0
[ 0.094408] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11605c active = 0
[ 0.094413] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1505c active = 0
[ 0.094417] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11505c active = 0
[ 0.094422] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x205c active = 0
[ 0.094426] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10205c active = 0
[ 0.094722] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.095087] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[1]=0x1100000 active = 1
[ 0.095202] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.095351] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20205c active = 1
[ 0.095456] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.095669] pnp: PnP ACPI: found 10 devices
[ 0.095684] PnPBIOS: Disabled
[ 0.138327] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.138394] clocksource: Switched to clocksource acpi_pm
[ 0.138478] pci 0000:00:0f.0: BAR 6: assigned [mem 0x08000000-0x08007fff pref]
[ 0.138546] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138559] pci 0000:00:01.0: bridge window [mem 0xef000000-0xefdfffff]
[ 0.138567] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.138582] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.138588] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.138595] pci_bus 0000:01: resource 1 [mem 0xef000000-0xefdfffff]
[ 0.138601] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref]
[ 0.138734] NET: Registered protocol family 2
[ 0.139467] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.139499] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.139546] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.139695] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.139731] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.139989] NET: Registered protocol family 1
[ 0.140180] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.140194] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.140209] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.141111] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[ 0.141120] PCI: setting IRQ 5 as level-triggered
[ 0.141821] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.141828] PCI: CLS 32 bytes, default 32
[ 0.143758] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.145391] workingset: timestamp_bits=30 max_order=15 bucket_order=0
[ 0.159112] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.159124] io scheduler noop registered
[ 0.159127] io scheduler deadline registered
[ 0.159279] io scheduler cfq registered (default)
[ 0.160529] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.160550] ACPI: Power Button [PWRB]
[ 0.160845] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.160853] ACPI: Power Button [PWRF]
[ 0.161033] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.161222] Warning: Processor Platform Limit event detected, but not handled.
[ 0.161224] Consider compiling CPUfreq support into your kernel.
[ 0.162142] isapnp: Scanning for PnP cards...
[ 0.516729] isapnp: No Plug & Play device found
[ 0.517050] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.537878] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.558719] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.560392] Non-volatile memory driver v1.3
[ 0.560403] Linux agpgart interface v0.103
[ 0.560533] [drm] Initialized drm 1.1.0 20060810
[ 0.571177] loop: module loaded
[ 0.571577] pata_via 0000:00:07.1: version 0.3.4
[ 0.574532] scsi host0: pata_via
[ 0.575050] scsi host1: pata_via
[ 0.575294] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14
[ 0.575302] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15
[ 0.575540] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 0.575549] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 0.575633] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 0.576791] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.576801] PCI: setting IRQ 10 as level-triggered
[ 0.577784] 8139too 0000:00:0f.0 eth0: RealTek RTL8139 at 0x0001a400, 00:40:95:08:18:34, IRQ 10
[ 0.577878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.577884] ehci-pci: EHCI PCI platform driver
[ 0.577958] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.578000] ohci-pci: OHCI PCI platform driver
[ 0.578050] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.578491] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.578539] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 0.578624] uhci_hcd 0000:00:07.2: irq 5, io base 0x0000d400
[ 0.580177] hub 1-0:1.0: USB hub found
[ 0.580268] hub 1-0:1.0: 2 ports detected
[ 0.581151] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 0.581187] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 0.581257] uhci_hcd 0000:00:07.3: irq 5, io base 0x0000d000
[ 0.582242] hub 2-0:1.0: USB hub found
[ 0.582278] hub 2-0:1.0: 2 ports detected
[ 0.582973] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.583598] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.583636] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.584562] mousedev: PS/2 mouse device common for all mice
[ 0.585431] rtc_cmos 00:03: RTC can wake from S4
[ 0.585934] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.586017] rtc_cmos 00:03: alarms up to one year, 242 bytes nvram
[ 0.586772] NET: Registered protocol family 17
[ 0.586909] Using IPI No-Shortcut mode
[ 0.587561] registered taskstats version 1
[ 0.588603] rtc_cmos 00:03: setting system clock to 2016-09-28 08:28:58 UTC (1475051338)
[ 0.588757] PM: Hibernation image not present or could not be loaded.
[ 0.617033] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.738836] ata1.00: ATA-4: ST33210A, 3.02, max UDMA/33
[ 0.738849] ata1.00: 6346368 sectors, multi 16: LBA
[ 0.743726] ata1.00: configured for UDMA/33
[ 0.744375] scsi 0:0:0:0: Direct-Access ATA ST33210A 3.02 PQ: 0 ANSI: 5
[ 0.745371] sd 0:0:0:0: [sda] 6346368 512-byte logical blocks: (3.25 GB/3.03 GiB)
[ 0.745570] sd 0:0:0:0: [sda] Write Protect is off
[ 0.745581] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.745667] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.772809] sda: sda1 sda2 < sda5 >
[ 0.774448] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.082625] random: fast init done
[ 1.152066] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xc5d014da3d, max_idle_ns: 440795221743 ns
[ 2.212784] input: PS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[ 2.234158] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 2.271701] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.271774] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 2.274774] Freeing unused kernel memory: 524K (c15c1000 - c1644000)
[ 2.275178] Write protecting the kernel text: 3920k
[ 2.275270] Write protecting the kernel read-only data: 1528k
[ 4.408748] udevd (114): /proc/114/oom_adj is deprecated, please use /proc/114/oom_score_adj instead.
[ 5.696720] random: crng init done
[ 6.430485] Adding 112416k swap on /dev/sda5. Priority:-1 extents:1 across:112416k
[ 6.449765] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.922465] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.856611] 8139too 0000:00:0f.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
--
Ondrej Zary
next prev parent reply other threads:[~2016-09-28 8:32 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-25 13:12 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off Ondrej Zary
2016-09-26 12:23 ` Rafael J. Wysocki
2016-09-27 21:02 ` Ondrej Zary
2016-09-27 21:32 ` Rafael J. Wysocki
2016-09-27 22:23 ` Ondrej Zary
2016-09-27 22:58 ` Rafael J. Wysocki
2016-09-27 23:06 ` Sinan Kaya
2016-09-28 8:32 ` Ondrej Zary [this message]
2016-09-28 14:11 ` Sinan Kaya
2016-09-28 17:02 ` Ondrej Zary
2016-09-28 18:22 ` Sinan Kaya
2016-09-28 19:23 ` Ondrej Zary
2016-09-28 23:38 ` Sinan Kaya
2016-09-29 9:10 ` Ondrej Zary
2016-09-29 13:09 ` okaya
2016-09-29 13:49 ` Ondrej Zary
2016-09-29 14:28 ` Sinan Kaya
2016-09-29 14:35 ` Sinan Kaya
2016-09-29 16:48 ` Ondrej Zary
2016-09-29 17:18 ` Sinan Kaya
2016-09-29 18:00 ` Ondrej Zary
2016-09-29 22:39 ` Sinan Kaya
2016-09-30 6:44 ` Ondrej Zary
2016-09-30 13:14 ` okaya
2016-09-30 15:56 ` Ondrej Zary
2016-09-30 19:30 ` Sinan Kaya
2016-09-30 19:39 ` Rafael J. Wysocki
2016-09-30 20:24 ` Sinan Kaya
2016-09-30 21:04 ` Rafael J. Wysocki
2016-09-30 21:14 ` Sinan Kaya
2016-09-30 21:27 ` Rafael J. Wysocki
2016-09-30 21:33 ` Sinan Kaya
2016-10-01 17:49 ` Sinan Kaya
2016-10-02 16:53 ` Ondrej Zary
2016-10-03 1:05 ` Sinan Kaya
2016-10-03 7:25 ` Ondrej Zary
2016-10-04 14:30 ` Sinan Kaya
2016-10-04 17:54 ` Ondrej Zary
2016-09-29 14:18 ` Wim Osterholt
2016-09-29 14:31 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201609281032.35190.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=bhelgaas@google.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=okaya@codeaurora.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.