From: Ondrej Zary <linux@rainbow-software.org>
To: Sinan Kaya <okaya@codeaurora.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>
Subject: Re: 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
Date: Wed, 28 Sep 2016 19:02:31 +0200 [thread overview]
Message-ID: <201609281902.31500.linux@rainbow-software.org> (raw)
In-Reply-To: <b404278b-d8e1-2b16-e044-c30d27ba8c25@codeaurora.org>
[-- Attachment #1: Type: text/plain, Size: 884 bytes --]
On Wednesday 28 September 2016 16:11:39 Sinan Kaya wrote:
> On 9/28/2016 4:32 AM, Ondrej Zary wrote:
> >>> OK
> >>>
> >>> > > Sinan, can you help, please?
> >> >
> >> > Sure, let's see what's going on. I was writing an email.
> >> >
> >> > Can we apply this and collect the kernel log? It also helps to see the
> >> > kernel log from a working combination.
> >
> > This is from yet another machine with the same problem:
>
> Thanks, It sounds like you have more than one machine with similar
> problems. Can you collect the log from the other machines with 4.8-rc8?
>
> and also a boot log with 4.6 kernel where things are working?
The attached logs are from another machine:
dmesg-bad-debug.txt: 4.8-rc8 with your debug patch - bad
dmesg-reverted.txt: 4.8-rc8 with patches (as per Rafael's suggestion)
reverted - good
dmesg-3.6.txt: 4.6 (Debian kernel) - good
--
Ondrej Zary
[-- Attachment #2: dmesg-bad-debug.txt --]
[-- Type: text/plain, Size: 31329 bytes --]
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #110 SMP Wed Sep 28 18:39:32 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FCFFF write-protect
[ 0.000000] FD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001)
[ 0.000000] ACPI: FACS 0x000000001FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffd000
[ 0.000000] low ram: 0 - 1fffd000
[ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff]
[ 0.000000] On node 0 totalpages: 130971
[ 0.000000] free_area_init_node: node 0, pgdat c15b1840, node_mem_map dfbfd020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @dfbe6000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129947
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda3 ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 512336K/523884K available (3918K kernel code, 436K rwdata, 1520K rodata, 524K init, 412K bss, 11548K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc15c1000 - 0xc1644000 ( 524 kB)
.data : 0xc13d3cc1 - 0xc15bf2e0 (1965 kB)
.text : 0xc1000000 - 0xc13d3cc1 (3919 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1365.077 MHz processor
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2730.15 BogoMIPS (lpj=5460308)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004037] ACPI: Core revision 20160422
[ 0.008736] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.008749] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.008799] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008802] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009413] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.009421] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.012358] Freeing SMP alternatives memory: 16K (c1644000 - c1648000)
[ 0.012620] smpboot: Max logical packages: 1
[ 0.012625] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.012627] smpboot: SMP motherboard not detected
[ 0.012628] smpboot: SMP disabled
[ 0.012631] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.012634] Performance Events:
[ 0.012640] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012642] no hardware sampling interrupt available.
[ 0.012646] p6 PMU driver.
[ 0.012651] ... version: 0
[ 0.012653] ... bit width: 32
[ 0.012654] ... generic registers: 2
[ 0.012656] ... value mask: 00000000ffffffff
[ 0.012658] ... max period: 000000007fffffff
[ 0.012659] ... fixed-purpose events: 0
[ 0.012661] ... event mask: 0000000000000003
[ 0.013422] x86: Booted up 1 node, 1 CPUs
[ 0.013429] smpboot: Total of 1 processors activated (2730.15 BogoMIPS)
[ 0.013754] devtmpfs: initialized
[ 0.014437] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[ 0.014568] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014788] NET: Registered protocol family 16
[ 0.015172] cpuidle: using governor ladder
[ 0.015175] cpuidle: using governor menu
[ 0.015309] Simple Boot Flag at 0x46 set to 0x1
[ 0.015323] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.015335] ACPI: bus type PCI registered
[ 0.019173] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
[ 0.019176] PCI: Using configuration type 1 for base access
[ 0.022424] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.022764] ACPI: Added _OSI(Module Device)
[ 0.022767] ACPI: Added _OSI(Processor Device)
[ 0.022769] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.022772] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.024714] ACPI: Interpreter enabled
[ 0.024768] ACPI: (supports S0 S1 S4 S5)
[ 0.024771] ACPI: Using PIC for interrupt routing
[ 0.024815] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.031717] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.031893] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.032101] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.032266] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.032421] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.032433] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.032444] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.032452] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.032560] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.032564] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.032568] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.032571] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.032575] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.032579] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored)
[ 0.032581] PCI: root bus 00: using default resources
[ 0.032687] PCI host bridge to bus 0000:00
[ 0.032693] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.032697] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.032702] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.032722] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.032736] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
[ 0.032898] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.033028] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.033203] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.033244] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f]
[ 0.033264] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.033268] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.033271] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.033275] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.033390] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.033431] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.033507] pci 0000:00:04.2: System wakeup disabled by ACPI
[ 0.033597] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.033602] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.033668] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.033674] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB
[ 0.033680] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.033818] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000
[ 0.033831] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f]
[ 0.033870] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.033977] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000
[ 0.033990] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.034000] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff]
[ 0.034032] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.034150] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
[ 0.034164] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref]
[ 0.034377] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000
[ 0.034393] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.034402] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.034411] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff]
[ 0.034433] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.034464] pci 0000:01:00.0: supports D1 D2
[ 0.034561] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.034567] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.034572] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.034577] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.034586] pci_bus 0000:00: on NUMA node 0
[ 0.037603] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.037608] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.037610] vgaarb: loaded
[ 0.037612] vgaarb: bridge control possible 0000:01:00.0
[ 0.037782] SCSI subsystem initialized
[ 0.037897] libata version 3.00 loaded.
[ 0.037908] ACPI: bus type USB registered
[ 0.037966] usbcore: registered new interface driver usbfs
[ 0.037993] usbcore: registered new interface driver hub
[ 0.038030] usbcore: registered new device driver usb
[ 0.038095] PCI: Using ACPI for IRQ routing
[ 0.038102] PCI: pci_cache_line_size set to 32 bytes
[ 0.038138] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.038142] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.038877] clocksource: Switched to clocksource pit
[ 0.052200] pnp: PnP ACPI init
[ 0.052564] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.052572] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.052577] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.052583] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.052593] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.053257] system 00:01: [io 0xe400-0xe43f] has been reserved
[ 0.053263] system 00:01: [io 0xe800-0xe80f] has been reserved
[ 0.053268] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.053273] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.053277] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.053286] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.053328] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[8]=0x110000 active = 1
[ 0.053384] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.053834] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11005c active = 1
[ 0.053839] pnp 00:03: [dma 2]
[ 0.053861] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[6]=0x11105c active = 0
[ 0.053917] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.054764] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11005c active = 1
[ 0.054768] pnp 00:04: [dma 3]
[ 0.054795] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1105c active = 0
[ 0.054798] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11105c active = 0
[ 0.054812] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1205c active = 0
[ 0.054815] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11205c active = 0
[ 0.054829] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1305c active = 0
[ 0.054832] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11305c active = 0
[ 0.054885] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.055381] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11005c active = 1
[ 0.055405] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11105c active = 0
[ 0.055414] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1105c active = 0
[ 0.055423] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11205c active = 0
[ 0.055431] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1205c active = 0
[ 0.055440] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1305c active = 0
[ 0.055443] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11305c active = 0
[ 0.055445] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1405c active = 0
[ 0.055448] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11405c active = 0
[ 0.055451] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x105c active = 0
[ 0.055454] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x10105c active = 0
[ 0.055529] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.056204] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[1]=0x1100000 active = 1
[ 0.056251] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.056660] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20105c active = 1
[ 0.056673] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[3]=0x1405c active = 0
[ 0.056676] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[4]=0x11405c active = 0
[ 0.056679] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1505c active = 0
[ 0.056681] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11505c active = 0
[ 0.056684] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x205c active = 0
[ 0.056687] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[12]=0x20205c active = 0
[ 0.056753] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.056771] pnp: PnP ACPI: found 8 devices
[ 0.056778] PnPBIOS: Disabled
[ 0.095595] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.095636] clocksource: Switched to clocksource acpi_pm
[ 0.095679] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[ 0.095687] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
[ 0.095695] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.095699] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.095706] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.095711] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095720] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.095724] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.095728] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.095732] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff]
[ 0.095736] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095816] NET: Registered protocol family 2
[ 0.096204] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.096251] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.096335] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.096413] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096439] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096591] NET: Registered protocol family 1
[ 0.096627] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.096799] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.096803] penalty[15] = 0x10005c
[ 0.096804] penalty[14] = 0x10005c
[ 0.096806] penalty[12] = 0x20205c
[ 0.096807] penalty[11] = 0x5c
[ 0.096809] penalty[10] = 0x205c
[ 0.096811] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.096813] penalty[9] = 0x100005c
[ 0.096814] penalty[7] = 0x11505c
[ 0.096816] penalty[6] = 0x11105c
[ 0.096818] penalty[5] = 0x1505c
[ 0.096819] penalty[4] = 0x11405c
[ 0.096821] penalty[3] = 0x1405c
[ 0.096823] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.096870] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.096875] pci 0000:00:04.2: PCI INT D: no GSI
[ 0.096922] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.096926] PCI: CLS 32 bytes, default 32
[ 0.098121] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.098940] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.105896] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.105904] io scheduler noop registered
[ 0.105906] io scheduler deadline registered
[ 0.105988] io scheduler cfq registered (default)
[ 0.106528] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.106538] ACPI: Power Button [PWRB]
[ 0.106683] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.106687] ACPI: Power Button [PWRF]
[ 0.106786] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.106876] Warning: Processor Platform Limit event detected, but not handled.
[ 0.106878] Consider compiling CPUfreq support into your kernel.
[ 0.107321] isapnp: Scanning for PnP cards...
[ 0.197568] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1605c active = 0
[ 0.201162] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1705c active = 0
[ 0.201165] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11605c active = 0
[ 0.201168] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.201171] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.201173] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x200105c active = 0
[ 0.201176] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x305c active = 0
[ 0.204775] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1805c active = 0
[ 0.204778] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11705c active = 0
[ 0.204780] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.204782] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.204785] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x300205c active = 0
[ 0.204788] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x405c active = 0
[ 0.207619] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1905c active = 0
[ 0.207622] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11805c active = 0
[ 0.207624] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.207626] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.207628] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x400305c active = 0
[ 0.207631] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x505c active = 0
[ 0.209617] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1a05c active = 0
[ 0.209620] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11905c active = 0
[ 0.209622] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.209625] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.209627] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x500405c active = 0
[ 0.209630] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x605c active = 0
[ 0.212952] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1b05c active = 0
[ 0.212955] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11a05c active = 0
[ 0.212958] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.212960] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.212962] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x600505c active = 0
[ 0.212965] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x705c active = 0
[ 0.215411] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1c05c active = 0
[ 0.215413] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11b05c active = 0
[ 0.215416] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.215418] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.215420] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x700605c active = 0
[ 0.215423] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x805c active = 0
[ 0.217018] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[5]=0x1d05c active = 0
[ 0.217021] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[7]=0x11c05c active = 0
[ 0.217023] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.217025] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.217028] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[9]=0x800705c active = 0
[ 0.217030] acpi_penalize_isa_irq:885 acpi_isa_irq_penalty[10]=0x905c active = 0
[ 0.229518] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.229523] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.229528] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.229622] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 0.229627] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 0.229630] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 0.229634] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 0.229694] 01:01: card 'Creative SB AWE64 PnP'
[ 0.229696] isapnp: 1 Plug & Play card detected total
[ 0.229823] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.250380] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.271047] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.291547] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.312043] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.312450] Non-volatile memory driver v1.3
[ 0.312454] Linux agpgart interface v0.103
[ 0.312510] [drm] Initialized drm 1.1.0 20060810
[ 0.317848] loop: module loaded
[ 0.317981] ata_piix 0000:00:04.1: version 2.13
[ 0.318965] scsi host0: ata_piix
[ 0.319243] scsi host1: ata_piix
[ 0.319368] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 0.319373] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 0.319627] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.319630] ehci-pci: EHCI PCI platform driver
[ 0.319656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.319676] ohci-pci: OHCI PCI platform driver
[ 0.319700] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.319869] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.319873] penalty[15] = 0x10005c
[ 0.319874] penalty[14] = 0x10005c
[ 0.319876] penalty[12] = 0x20205c
[ 0.319877] penalty[11] = 0x5c
[ 0.319879] penalty[10] = 0x905c
[ 0.319881] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.319883] penalty[9] = 0x800705c
[ 0.319884] penalty[7] = 0x11c05c
[ 0.319886] penalty[6] = 0x11105c
[ 0.319888] penalty[5] = 0x1d05c
[ 0.319889] penalty[4] = 0x11405c
[ 0.319891] penalty[3] = 0x1405c
[ 0.319893] ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
[ 0.319940] acpi_irq_get_penalty:512 adding SCI penalty: 16777216
[ 0.319945] uhci_hcd 0000:00:04.2: PCI INT D: no GSI
[ 0.319971] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 0.319987] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 0.320096] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
[ 0.320833] hub 1-0:1.0: USB hub found
[ 0.320852] hub 1-0:1.0: 2 ports detected
[ 0.321233] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.324648] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.324663] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.325008] mousedev: PS/2 mouse device common for all mice
[ 0.325436] rtc_cmos 00:02: RTC can wake from S4
[ 0.325629] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.325656] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 0.326049] NET: Registered protocol family 17
[ 0.326209] Using IPI No-Shortcut mode
[ 0.326514] registered taskstats version 1
[ 0.326921] rtc_cmos 00:02: setting system clock to 2016-09-28 18:42:34 UTC (1475088154)
[ 0.326997] PM: Hibernation image not present or could not be loaded.
[ 0.355482] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.483499] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
[ 0.483512] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100
[ 0.483622] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 0.483626] ata1.00: 234493056 sectors, multi 16: LBA48
[ 0.486508] ata2.00: configured for UDMA/33
[ 0.486816] ata1.00: configured for UDMA/33
[ 0.487064] ata2.01: configured for UDMA/33
[ 0.487361] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5
[ 0.488205] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB)
[ 0.488358] sd 0:0:0:0: [sda] Write Protect is off
[ 0.488363] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.488426] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.492298] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
[ 0.506153] scsi 1:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5
[ 0.525076] sda: sda1 sda2 sda3
[ 0.525905] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.046926] random: fast init done
[ 1.120050] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13ad41f0395, max_idle_ns: 440795258035 ns
[ 1.935924] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.945228] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 1.965685] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.965719] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 1.967438] Freeing unused kernel memory: 524K (c15c1000 - c1644000)
[ 1.967664] Write protecting the kernel text: 3920k
[ 1.967730] Write protecting the kernel read-only data: 1528k
[ 4.322714] systemd-udevd[194]: starting version 215
[ 5.925473] random: crng init done
[ 7.622407] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 7.688916] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.149054] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[-- Attachment #3: dmesg-4.6.txt --]
[-- Type: text/plain, Size: 42349 bytes --]
[ 0.000000] Linux version 4.6.0-0.bpo.1-686 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.6.4-1~bpo8+1 (2016-08-11)
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FCFFF write-protect
[ 0.000000] FD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x018bc000, 0x018bcfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1eb88000-0x1fb1efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001)
[ 0.000000] ACPI: FACS 0x000000001FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffd000
[ 0.000000] low ram: 0 - 1fffd000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff]
[ 0.000000] On node 0 totalpages: 130971
[ 0.000000] free_area_init_node: node 0, pgdat c1775600, node_mem_map dfb7d024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1116 pages used for memmap
[ 0.000000] Normal zone: 126973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 18 pages/cpu @dfb67000 s41676 r0 d32052 u73728
[ 0.000000] pcpu-alloc: s41676 r0 d32052 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129819
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-0.bpo.1-686 root=UUID=f9e42749-d46b-465f-911a-46fa2db271ad ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 493792K/523884K available (5424K kernel code, 664K rwdata, 1632K rodata, 688K init, 468K bss, 30092K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc178d000 - 0xc1839000 ( 688 kB)
.data : 0xc154c632 - 0xc178c000 (2302 kB)
.text : 0xc1000000 - 0xc154c632 (5425 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=de42c000 soft=de42e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1364.997 MHz processor
[ 0.004021] Calibrating delay loop (skipped), value calculated using timer frequency.. 2729.99 BogoMIPS (lpj=5459988)
[ 0.004031] pid_max: default: 32768 minimum: 301
[ 0.004082] ACPI: Core revision 20160108
[ 0.009394] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.009411] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.009475] Security Framework initialized
[ 0.009482] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009505] AppArmor: AppArmor disabled by boot time parameter
[ 0.009534] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009540] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.010311] Disabling memory control group subsystem
[ 0.010425] mce: CPU supports 5 MCE banks
[ 0.010464] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.010470] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.017077] Freeing SMP alternatives memory: 24K (c1839000 - c183f000)
[ 0.019801] ftrace: allocating 23042 entries in 46 pages
[ 0.032388] smpboot: Max logical packages: 1
[ 0.032406] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.032409] smpboot: SMP motherboard not detected
[ 0.032412] smpboot: SMP disabled
[ 0.032416] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.032447] Performance Events:
[ 0.032456] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.032460] no hardware sampling interrupt available.
[ 0.032465] p6 PMU driver.
[ 0.032472] ... version: 0
[ 0.032475] ... bit width: 32
[ 0.032478] ... generic registers: 2
[ 0.032481] ... value mask: 00000000ffffffff
[ 0.032485] ... max period: 000000007fffffff
[ 0.032488] ... fixed-purpose events: 0
[ 0.032491] ... event mask: 0000000000000003
[ 0.037491] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.037559] x86: Booted up 1 node, 1 CPUs
[ 0.037565] smpboot: Total of 1 processors activated (2729.99 BogoMIPS)
[ 0.037913] devtmpfs: initialized
[ 0.038555] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[ 0.038754] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.038867] pinctrl core: initialized pinctrl subsystem
[ 0.039294] NET: Registered protocol family 16
[ 0.039683] cpuidle: using governor ladder
[ 0.039692] cpuidle: using governor menu
[ 0.039800] Simple Boot Flag at 0x46 set to 0x1
[ 0.039824] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.039935] ACPI: bus type PCI registered
[ 0.039943] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.043822] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
[ 0.043827] PCI: Using configuration type 1 for base access
[ 0.046101] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.046803] ACPI: Added _OSI(Module Device)
[ 0.046812] ACPI: Added _OSI(Processor Device)
[ 0.046816] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.046820] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.048956] ACPI: Interpreter enabled
[ 0.049019] ACPI: (supports S0 S1 S4 S5)
[ 0.049024] ACPI: Using PIC for interrupt routing
[ 0.049072] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.056938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.057135] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.057321] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.057506] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.057681] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.057697] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[ 0.057711] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.057722] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.057847] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.057853] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.057859] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.057865] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.057870] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.057875] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored)
[ 0.057879] PCI: root bus 00: using default resources
[ 0.058084] PCI host bridge to bus 0000:00
[ 0.058092] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.058098] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.058105] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.058125] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.058143] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
[ 0.058328] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.058468] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.058658] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.058702] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f]
[ 0.058725] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.058731] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.058736] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.058741] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.058864] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.058908] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.058988] pci 0000:00:04.2: System wakeup disabled by ACPI
[ 0.059093] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.059100] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.059173] pci 0000:00:04.3: can't claim BAR 13 [io 0xe400-0xe43f]: address conflict with ACPI CPU throttle [io 0xe410-0xe415]
[ 0.059181] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB
[ 0.059189] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.059330] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000
[ 0.059346] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f]
[ 0.059387] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.059512] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000
[ 0.059528] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.059540] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff]
[ 0.059574] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.059697] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
[ 0.059713] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref]
[ 0.059950] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000
[ 0.059968] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.059979] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.060028] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff]
[ 0.060055] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.060090] pci 0000:01:00.0: supports D1 D2
[ 0.060205] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.060213] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.060219] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.060226] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.060236] pci_bus 0000:00: on NUMA node 0
[ 0.063561] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.063570] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.063573] vgaarb: loaded
[ 0.063577] vgaarb: bridge control possible 0000:01:00.0
[ 0.063874] PCI: Using ACPI for IRQ routing
[ 0.063883] PCI: pci_cache_line_size set to 32 bytes
[ 0.063925] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.063931] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.064609] clocksource: Switched to clocksource pit
[ 0.089424] VFS: Disk quotas dquot_6.6.0
[ 0.089496] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.089898] pnp: PnP ACPI init
[ 0.090294] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.090304] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.090310] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.090317] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.090330] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.090945] system 00:01: [io 0xe400-0xe43f] could not be reserved
[ 0.090953] system 00:01: [io 0xe800-0xe80f] has been reserved
[ 0.090959] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.090965] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.090971] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.090979] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.091077] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.091649] pnp 00:03: [dma 2]
[ 0.091740] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.092667] pnp 00:04: [dma 3]
[ 0.092777] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.093465] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.094271] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.094811] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.094832] pnp: PnP ACPI: found 8 devices
[ 0.094855] PnPBIOS: Disabled by ACPI PNP
[ 0.134355] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.134407] clocksource: Switched to clocksource acpi_pm
[ 0.134450] pci 0000:00:04.3: BAR 13: [io size 0x0040] has bogus alignment
[ 0.134471] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[ 0.134479] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
[ 0.134488] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.134495] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.134504] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.134510] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.134521] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.134527] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.134532] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.134537] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff]
[ 0.134543] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref]
[ 0.134647] NET: Registered protocol family 2
[ 0.135127] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.135176] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.135259] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.135335] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.135361] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.135642] NET: Registered protocol family 1
[ 0.135696] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.136474] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.136482] PCI: setting IRQ 9 as level-triggered
[ 0.136637] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.136643] PCI: CLS 32 bytes, default 32
[ 0.136834] Unpacking initramfs...
[ 1.039778] Freeing initrd memory: 15964K (deb88000 - dfb1f000)
[ 1.041185] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.041271] audit: initializing netlink subsys (disabled)
[ 1.041327] audit: type=2000 audit(1475088988.038:1): initialized
[ 1.041958] Initialise system trusted keyring
[ 1.042261] workingset: timestamp_bits=12 max_order=17 bucket_order=5
[ 1.042320] zbud: loaded
[ 1.453856] Key type asymmetric registered
[ 1.453869] Asymmetric key parser 'x509' registered
[ 1.453955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.454069] io scheduler noop registered
[ 1.454077] io scheduler deadline registered
[ 1.454099] io scheduler cfq registered (default)
[ 1.454352] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.454372] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.454418] intel_idle: does not run on family 6 model 11
[ 1.454473] GHES: HEST is not enabled!
[ 1.454531] isapnp: Scanning for PnP cards...
[ 1.577454] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 1.577461] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 1.577467] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 1.577570] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 1.577576] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 1.577582] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 1.577587] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 1.577655] 01:01: card 'Creative SB AWE64 PnP'
[ 1.577660] isapnp: 1 Plug & Play card detected total
[ 1.577814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.598381] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.619069] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.639574] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.660079] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 1.660447] Linux agpgart interface v0.103
[ 1.660643] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 1.663978] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe4000000
[ 1.664424] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.667651] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.667669] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.668121] mousedev: PS/2 mouse device common for all mice
[ 1.668261] rtc_cmos 00:02: RTC can wake from S4
[ 1.668454] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.668483] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 1.668565] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.669487] NET: Registered protocol family 10
[ 1.670100] mip6: Mobile IPv6
[ 1.670116] NET: Registered protocol family 17
[ 1.670130] mpls_gso: MPLS GSO support
[ 1.670586] microcode: CPU0 sig=0x6b1, pf=0x10, revision=0x1c
[ 1.670679] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.670708] Using IPI No-Shortcut mode
[ 1.671074] registered taskstats version 1
[ 1.671109] Loading compiled-in X.509 certificates
[ 1.676507] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 1.678863] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 1.678930] zswap: loaded using pool lzo/zbud
[ 1.679512] rtc_cmos 00:02: setting system clock to 2016-09-28 18:56:28 UTC (1475088988)
[ 1.679644] PM: Hibernation image not present or could not be loaded.
[ 1.682207] Freeing unused kernel memory: 688K (c178d000 - c1839000)
[ 1.682324] Write protecting the kernel text: 5428k
[ 1.682389] Write protecting the kernel read-only data: 1636k
[ 1.697898] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.720514] systemd-udevd[68]: starting version 215
[ 1.721588] random: systemd-udevd urandom read with 6 bits of entropy available
[ 1.786059] floppy: module verification failed: signature and/or required key missing - tainting kernel
[ 1.807536] 3c59x: Donald Becker and others.
[ 1.807569] 0000:00:09.0: 3Com PCI 3c900 Boomerang 10Mbps Combo at 0001b000.
[ 1.835912] SCSI subsystem initialized
[ 1.839927] ACPI: bus type USB registered
[ 1.848968] usbcore: registered new interface driver usbfs
[ 1.849038] usbcore: registered new interface driver hub
[ 1.849106] usbcore: registered new device driver usb
[ 1.850782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.851947] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.868152] Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
[ 1.884954] libata version 3.00 loaded.
[ 1.888185] FDC 0 is a post-1991 82077
[ 1.915191] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 5.191651] tsc: Refined TSC clocksource calibration: 1364.999 MHz
[ 5.191666] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13acf81e477, max_idle_ns: 440795209386 ns
[ 5.237040] advansys 0000:00:0a.0: firmware: direct-loading firmware advansys/mcode.bin
[ 5.239578] scsi host0: AdvanSys SCSI 3.5: PCI Ultra: IO 0xA800-0xA80F, IRQ 0x9
[ 5.240493] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 5.240522] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 5.240537] uhci_hcd 0000:00:04.2: detected 2 ports
[ 5.240570] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
[ 5.240841] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.240847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.240852] usb usb1: Product: UHCI Host Controller
[ 5.240857] usb usb1: Manufacturer: Linux 4.6.0-0.bpo.1-686 uhci_hcd
[ 5.240862] usb usb1: SerialNumber: 0000:00:04.2
[ 5.241476] hub 1-0:1.0: USB hub found
[ 5.241605] hub 1-0:1.0: 2 ports detected
[ 5.241930] ata_piix 0000:00:04.1: version 2.13
[ 5.246895] scsi host1: ata_piix
[ 5.247422] scsi host2: ata_piix
[ 5.247592] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 5.247598] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 5.292062] blk_update_request: I/O error, dev fd0, sector 0
[ 5.292112] floppy: error -5 while reading block 0
[ 5.336074] blk_update_request: I/O error, dev fd1, sector 0
[ 5.336123] floppy: error -5 while reading block 0
[ 5.407512] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
[ 5.407530] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100
[ 5.407642] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 5.407648] ata1.00: 234493056 sectors, multi 16: LBA48
[ 5.410333] ata1.00: configured for UDMA/33
[ 5.412383] ata2.00: configured for UDMA/33
[ 5.417014] ata2.01: configured for UDMA/33
[ 5.633723] psmouse serio1: hgpk: ID: 10 00 64
[ 6.188125] clocksource: Switched to clocksource tsc
[ 6.715330] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5
[ 6.718103] scsi 2:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
[ 6.726655] scsi 2:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5
[ 6.742284] sd 1:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB)
[ 6.742490] sd 1:0:0:0: [sda] Write Protect is off
[ 6.742497] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.742551] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.750462] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input2
[ 6.763212] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[ 6.763226] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.763740] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 6.772980] sr 2:0:1:0: [sr1] scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 6.773472] sr 2:0:1:0: Attached scsi CD-ROM sr1
[ 6.775211] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 6.775317] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 6.775409] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 6.782512] sda: sda1 sda2 sda3
[ 6.783453] sd 1:0:0:0: [sda] Attached SCSI disk
[ 7.135083] PM: Starting manual resume from disk
[ 7.135103] PM: Hibernation image partition 8:2 present
[ 7.135107] PM: Looking for hibernation image.
[ 7.135659] PM: Image not found (code -22)
[ 7.135666] PM: Hibernation image not present or could not be loaded.
[ 7.532688] random: nonblocking pool is initialized
[ 7.553907] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 7.591627] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.355875] systemd-udevd[328]: starting version 215
[ 11.619994] media: Linux media interface: v0.10
[ 11.685887] parport_pc 00:04: reported by Plug and Play ACPI
[ 11.686032] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 11.690402] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.701721] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 11.701738] ACPI: Power Button [PWRB]
[ 11.701904] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 11.701910] ACPI: Power Button [PWRF]
[ 11.780807] parport1: PC-style at 0x278 [PCSPP,TRISTATE]
[ 11.780838] parport1: irq 0 detected
[ 11.838897] piix4_smbus 0000:00:04.3: SMBus Host Controller at 0xe800, revision 0
[ 11.850093] tsc: Marking TSC unstable due to TSC halts in idle
[ 11.855564] clocksource: Switched to clocksource acpi_pm
[ 11.876508] Linux video capture interface: v2.00
[ 11.916287] blk_update_request: I/O error, dev fd0, sector 0
[ 11.916338] floppy: error -5 while reading block 0
[ 11.960429] blk_update_request: I/O error, dev fd1, sector 0
[ 11.960479] floppy: error -5 while reading block 0
[ 12.008383] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 12.104140] [drm] Initialized drm 1.1.0 20060810
[ 12.234841] bttv: driver version 0.9.19 loaded
[ 12.234855] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 12.234858] bttv: Host bridge needs ETBF enabled
[ 12.234939] bttv: Bt8xx card found (0)
[ 12.235679] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 12.235686] PCI: setting IRQ 10 as level-triggered
[ 12.235709] bttv: 0: Bt848 (rev 18) at 0000:00:0b.0, irq: 10, latency: 32, mmio: 0xd7000000
[ 12.239358] bttv: 0: using: Bt848 Capture 14MHz [card=163,insmod option]
[ 12.239391] bttv: 0: enabling ETBF (430FX/VP3 compatibility)
[ 12.239611] bttv: 0: tuner absent
[ 12.239671] bttv: 0: Setting PLL: 14318181 => 35468950 (needs up to 100ms)
[ 12.268124] bttv: PLL set ok
[ 12.268366] bttv: 0: registered device video0
[ 12.268460] bttv: 0: registered device vbi0
[ 12.546460] ppdev: user-space parallel port driver
[ 13.025157] [drm] radeon kernel modesetting enabled.
[ 13.026125] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 13.026132] PCI: setting IRQ 11 as level-triggered
[ 13.027255] [drm] initializing kernel modesetting (R200 0x1002:0x514D 0x148C:0x2054 0x00).
[ 13.027286] [drm] register mmio base: 0xD6800000
[ 13.027289] [drm] register mmio size: 65536
[ 13.028148] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 13.028167] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
[ 13.028188] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 13.028196] radeon 0000:01:00.0: GTT: 64M 0xE4000000 - 0xE7FFFFFF
[ 13.028207] radeon 0000:01:00.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (64M used)
[ 13.028284] [drm] Detected VRAM RAM=128M, BAR=128M
[ 13.028288] [drm] RAM width 128bits DDR
[ 13.028450] [TTM] Zone kernel: Available graphics memory: 255234 kiB
[ 13.028455] [TTM] Initializing pool allocator
[ 13.028534] [drm] radeon: 64M of VRAM memory ready
[ 13.028539] [drm] radeon: 64M of GTT memory ready.
[ 13.029879] radeon 0000:01:00.0: WB disabled
[ 13.029898] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e4000000 and cpu addr 0xe081c000
[ 13.029905] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 13.029908] [drm] Driver supports precise vblank timestamp query.
[ 13.029934] [drm] radeon: irq initialized.
[ 13.029977] [drm] Loading R200 Microcode
[ 13.176476] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/R200_cp.bin
[ 13.176803] [drm] radeon: ring at 0x00000000E4001000
[ 13.176832] [drm] ring test succeeded in 1 usecs
[ 13.177086] [drm] ib test succeeded in 0 usecs
[ 13.178410] [drm] Radeon Display Connectors
[ 13.178420] [drm] Connector 0:
[ 13.178423] [drm] VGA-1
[ 13.178428] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.178431] [drm] Encoders:
[ 13.178434] [drm] CRT1: INTERNAL_DAC1
[ 13.178438] [drm] Connector 1:
[ 13.178440] [drm] DVI-D-1
[ 13.178443] [drm] HPD1
[ 13.178448] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.178451] [drm] Encoders:
[ 13.178454] [drm] DFP1: INTERNAL_TMDS1
[ 13.215232] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 13.215929] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 13.248105] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.248149] Raw EDID:
[ 13.248185] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.248220] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.248254] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.248288] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.248322] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.248356] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.248390] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.248423] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.277207] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.277254] Raw EDID:
[ 13.277289] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.277325] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.277361] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.277398] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.277433] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.277470] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.277505] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.277541] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.307210] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.307264] Raw EDID:
[ 13.307301] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.307337] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.307373] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.307408] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.307445] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.307480] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.307516] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.307552] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.354770] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 244
[ 13.354825] Raw EDID:
[ 13.354862] 00 ff ff ff ff ff ff 00 26 cd 48 17 51 ac 31 01
[ 13.354899] 0e 0b 01 01 0e 20 18 94 c8 00 b8 a0 57 49 9b 26
[ 13.354935] 10 48 4c 3f ef 80 31 4a 49 4f a9 40 81 8f 61 59
[ 13.354970] 01 01 01 01 01 01 00 00 00 fe 00 00 00 00 00 00
[ 13.355006] 00 00 00 00 00 00 00 00 00 00 00 fe 00 00 00 00
[ 13.355042] 00 00 00 00 00 00 00 00 00 00 00 00 00 fe 00 00
[ 13.355078] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fe
[ 13.355114] 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e1
[ 13.355155] radeon 0000:01:00.0: DVI-D-1: EDID block 0 invalid.
[ 13.355573] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 13.542079] [drm] fb mappable at 0xD8040000
[ 13.542089] [drm] vram apper at 0xD8000000
[ 13.542092] [drm] size 3145728
[ 13.542096] [drm] fb depth is 24
[ 13.542099] [drm] pitch is 4096
[ 13.542743] fbcon: radeondrmfb (fb0) is primary device
[ 13.666095] Console: switching to colour frame buffer device 128x48
[ 13.683804] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.683825] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[ 13.923232] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k FS
[ 14.215756] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 15.695493] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 16.495658] device-mapper: uevent: version 1.0.3
[ 16.497041] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 16.799373] lp0: using parport0 (interrupt-driven).
[ 16.800840] lp1: using parport1 (polling).
[ 16.889228] loop: module loaded
[ 17.022545] w83781d: Found a W83781D chip at 0x290
[ 17.597067] sbawe 01:01.00: [irq 5]
[ 17.597083] sbawe 01:01.00: [dma 1]
[ 17.597089] sbawe 01:01.00: [dma 5]
[ 17.597103] sbawe 01:01.00: [io 0x0220-0x022f]
[ 17.597111] sbawe 01:01.00: [io 0x0330-0x0331]
[ 17.597120] sbawe 01:01.00: [io 0x0388-0x038b]
[ 17.599438] sbawe 01:01.00: activated
[ 17.599448] sbawe 01:01.02: [io 0x0620-0x0623]
[ 17.599456] sbawe 01:01.02: [io 0x0a20-0x0a23]
[ 17.599464] sbawe 01:01.02: [io 0x0e20-0x0e23]
[ 17.601710] sbawe 01:01.02: activated
[ 17.652094] EMU8000 [0x620]: 512 KiB on-board DRAM detected
[ 19.180711] fuse init (API version 7.24)
[ 21.756729] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 21.858427] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 22.867383] eth0: setting half-duplex.
[ 23.717991] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 23.718526] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 23.847833] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 33.505269] /dev/vmmon[1902]: Module vmmon: registered with major=10 minor=165
[ 33.505297] /dev/vmmon[1902]: Module vmmon: initialized
[ 33.774009] /dev/vmci[1912]: VMCI: Driver initialized.
[ 33.775258] /dev/vmci[1912]: Module vmci: registered with major=10 minor=58
[ 33.775270] /dev/vmci[1912]: Module vmci: initialized
[ 34.861891] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 34.862513] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 34.986158] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 35.021149] /dev/vmnet: open called by PID 1968 (vmnet-bridge)
[ 35.021173] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 35.021229] /dev/vmnet: port on hub 0 successfully opened
[ 35.021261] bridge-eth0: up
[ 35.021269] bridge-eth0: attached
[ 35.190680] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 35.191284] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 35.346853] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 36.489789] /dev/vmnet: open called by PID 2015 (vmnet-dhcpd)
[ 36.489815] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 36.489865] /dev/vmnet: port on hub 1 successfully opened
[ 36.693868] /dev/vmnet: open called by PID 2017 (vmnet-netifup)
[ 36.693903] /dev/vmnet: port on hub 1 successfully opened
[ 36.940293] /dev/vmnet: open called by PID 2019 (vmnet-dhcpd)
[ 36.940323] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 36.940381] /dev/vmnet: port on hub 8 successfully opened
[ 37.188528] /dev/vmnet: open called by PID 2028 (vmnet-natd)
[ 37.188565] /dev/vmnet: port on hub 8 successfully opened
[ 37.353293] /dev/vmnet: open called by PID 2030 (vmnet-netifup)
[ 37.353333] /dev/vmnet: port on hub 8 successfully opened
[ 41.486843] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 41.487454] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 41.606640] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 41.728136] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 41.728793] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 41.848582] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 41.968521] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 41.969129] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 42.101880] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 50.247288] systemd-logind[2180]: New seat seat0.
[ 50.272662] systemd-logind[2180]: Watching system buttons on /dev/input/event3 (Power Button)
[ 50.272890] systemd-logind[2180]: Watching system buttons on /dev/input/event2 (Power Button)
[ 50.291427] systemd-logind[2180]: Failed to start user service: Unknown unit: user@1000.service
[ 50.307693] systemd-logind[2180]: New session c1 of user rainbow.
[ 55.626314] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 55.626845] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 55.747297] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 55.867910] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 55.868916] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 55.987477] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 56.107247] platform VGA-1: firmware: direct-loading firmware edid-iiyama.bin
[ 56.107855] [drm] Got external EDID base block and 0 extensions from "edid-iiyama.bin" for connector "VGA-1"
[ 56.226627] [drm:radeon_dvi_detect [radeon]] *ERROR* DVI-D-1: probed a monitor but no|invalid EDID
[ 97.010370] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 97.077658] JFS: nTxBlock = 3988, nTxLock = 31904
[ 97.191115] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 97.384418] QNX4 filesystem 0.2.3 registered.
[ 97.556056] raid6: mmxx1 gen() 1302 MB/s
[ 97.624061] raid6: mmxx2 gen() 1561 MB/s
[ 97.692074] raid6: sse1x1 gen() 1152 MB/s
[ 97.760064] raid6: sse1x2 gen() 1522 MB/s
[ 97.828165] raid6: int32x1 gen() 420 MB/s
[ 97.896057] raid6: int32x1 xor() 208 MB/s
[ 97.964139] raid6: int32x2 gen() 539 MB/s
[ 98.032076] raid6: int32x2 xor() 297 MB/s
[ 98.100153] raid6: int32x4 gen() 466 MB/s
[ 98.168082] raid6: int32x4 xor() 291 MB/s
[ 98.236134] raid6: int32x8 gen() 428 MB/s
[ 98.304042] raid6: int32x8 xor() 263 MB/s
[ 98.304046] raid6: using algorithm mmxx2 gen() 1561 MB/s
[ 98.304050] raid6: using intx1 recovery algorithm
[ 99.244489] xor: measuring software checksum speed
[ 99.284036] pIII_sse : 3069.000 MB/sec
[ 99.324034] prefetch64-sse: 3294.000 MB/sec
[ 99.324039] xor: using function: prefetch64-sse (3294.000 MB/sec)
[ 99.576155] Btrfs loaded
[-- Attachment #4: dmesg-reverted.txt --]
[-- Type: text/plain, Size: 24042 bytes --]
[ 0.000000] Linux version 4.8.0-rc8+ (zary@gsql) (gcc version 4.7.2 (Debian 4.7.2-5) ) #111 SMP Wed Sep 28 18:50:17 CEST 2016
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffcfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001fffd000-0x000000001fffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001ffff000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Legacy DMI 2.0 present.
[ 0.000000] DMI: System Manufacturer System Name/P2B, BIOS ASUS P2B ACPI BIOS Revision 1014 Beta 003 08/01/02
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1fffd max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-AFFFF uncachable
[ 0.000000] B0000-BFFFF write-combining
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FCFFF write-protect
[ 0.000000] FD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0D8000000 mask FF8000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x016b7000, 0x016b7fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7F90 000014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 0x000000001FFFD000 00002C (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 0x000000001FFFD080 000074 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 0x000000001FFFD100 001BA8 (v01 ASUS P2B 00001000 MSFT 01000001)
[ 0.000000] ACPI: FACS 0x000000001FFFF000 000040
[ 0.000000] ACPI: BOOT 0x000000001FFFD040 000028 (v01 ASUS P2B 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffd000
[ 0.000000] low ram: 0 - 1fffd000
[ 0.000000] BRK [0x016b8000, 0x016b8fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001fffcfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffcfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001fffcfff]
[ 0.000000] On node 0 totalpages: 130971
[ 0.000000] free_area_init_node: node 0, pgdat c15b1c00, node_mem_map dfbfd020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126973 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xfffeffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 19 pages/cpu @dfbe6000 s47980 r0 d29844 u77824
[ 0.000000] pcpu-alloc: s47980 r0 d29844 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129947
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-test root=/dev/sda3 ro quiet drm_kms_helper.edid_firmware=VGA-1:edid-iiyama.bin video=VGA-1:1024x768
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 512336K/523884K available (3918K kernel code, 437K rwdata, 1520K rodata, 524K init, 412K bss, 11548K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07fd000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdfffd000 ( 511 MB)
.init : 0xc15c1000 - 0xc1644000 ( 524 kB)
.data : 0xc13d3be1 - 0xc15bf6a0 (1966 kB)
.text : 0xc1000000 - 0xc13d3be1 (3918 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:2304 nr_irqs:32 16
[ 0.000000] CPU 0 irqstacks, hard=df41c000 soft=df41e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1365.047 MHz processor
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 2730.09 BogoMIPS (lpj=5460188)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004036] ACPI: Core revision 20160422
[ 0.008470] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.008483] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.008532] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.008536] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.009150] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.009157] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.012097] Freeing SMP alternatives memory: 16K (c1644000 - c1648000)
[ 0.012358] smpboot: Max logical packages: 1
[ 0.012364] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.012365] smpboot: SMP motherboard not detected
[ 0.012367] smpboot: SMP disabled
[ 0.012370] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.012374] Performance Events:
[ 0.012379] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.012381] no hardware sampling interrupt available.
[ 0.012385] p6 PMU driver.
[ 0.012390] ... version: 0
[ 0.012391] ... bit width: 32
[ 0.012393] ... generic registers: 2
[ 0.012395] ... value mask: 00000000ffffffff
[ 0.012397] ... max period: 000000007fffffff
[ 0.012398] ... fixed-purpose events: 0
[ 0.012400] ... event mask: 0000000000000003
[ 0.013162] x86: Booted up 1 node, 1 CPUs
[ 0.013169] smpboot: Total of 1 processors activated (2730.09 BogoMIPS)
[ 0.013490] devtmpfs: initialized
[ 0.014174] PM: Registering ACPI NVS region [mem 0x1ffff000-0x1fffffff] (4096 bytes)
[ 0.014306] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014524] NET: Registered protocol family 16
[ 0.014901] cpuidle: using governor ladder
[ 0.014905] cpuidle: using governor menu
[ 0.015039] Simple Boot Flag at 0x46 set to 0x1
[ 0.015052] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.015065] ACPI: bus type PCI registered
[ 0.018903] PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
[ 0.018906] PCI: Using configuration type 1 for base access
[ 0.022164] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.022504] ACPI: Added _OSI(Module Device)
[ 0.022507] ACPI: Added _OSI(Processor Device)
[ 0.022509] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.022512] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.024396] ACPI: Interpreter enabled
[ 0.024450] ACPI: (supports S0 S1 S4 S5)
[ 0.024453] ACPI: Using PIC for interrupt routing
[ 0.024496] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.031263] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.031434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.031593] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.031752] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.031905] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.031916] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.031928] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.031937] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.032085] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.032089] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.032093] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.032097] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.032101] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[ 0.032104] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xfffdffff window] (ignored)
[ 0.032107] PCI: root bus 00: using default resources
[ 0.032213] PCI host bridge to bus 0000:00
[ 0.032219] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.032223] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.032228] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.032248] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[ 0.032261] pci 0000:00:00.0: reg 0x10: [mem 0xe4000000-0xe7ffffff pref]
[ 0.032423] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[ 0.032551] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[ 0.032725] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[ 0.032766] pci 0000:00:04.1: reg 0x20: [io 0xb800-0xb80f]
[ 0.032786] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.032790] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.032793] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.032797] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.032911] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[ 0.032953] pci 0000:00:04.2: reg 0x20: [io 0xb400-0xb41f]
[ 0.033026] pci 0000:00:04.2: System wakeup disabled by ACPI
[ 0.033116] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[ 0.033121] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
[ 0.033188] pci 0000:00:04.3: quirk: [io 0xe400-0xe43f] claimed by PIIX4 ACPI
[ 0.033193] pci 0000:00:04.3: quirk: [io 0xe800-0xe80f] claimed by PIIX4 SMB
[ 0.033199] pci 0000:00:04.3: PIIX4 devres B PIO at 0290-0297
[ 0.033334] pci 0000:00:09.0: [10b7:9001] type 00 class 0x020000
[ 0.033348] pci 0000:00:09.0: reg 0x10: [io 0xb000-0xb03f]
[ 0.033386] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.033492] pci 0000:00:0a.0: [10cd:1300] type 00 class 0x010000
[ 0.033506] pci 0000:00:0a.0: reg 0x10: [io 0xa800-0xa8ff]
[ 0.033516] pci 0000:00:0a.0: reg 0x14: [mem 0xd6000000-0xd60000ff]
[ 0.033547] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[ 0.033665] pci 0000:00:0b.0: [109e:0350] type 00 class 0x040000
[ 0.033680] pci 0000:00:0b.0: reg 0x10: [mem 0xd7000000-0xd7000fff pref]
[ 0.033892] pci 0000:01:00.0: [1002:514d] type 00 class 0x030000
[ 0.033907] pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xdfffffff pref]
[ 0.033916] pci 0000:01:00.0: reg 0x14: [io 0xd800-0xd8ff]
[ 0.033925] pci 0000:01:00.0: reg 0x18: [mem 0xd6800000-0xd680ffff]
[ 0.033948] pci 0000:01:00.0: reg 0x30: [mem 0xd7fe0000-0xd7ffffff pref]
[ 0.033979] pci 0000:01:00.0: supports D1 D2
[ 0.034076] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.034082] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.034087] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.034092] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.034101] pci_bus 0000:00: on NUMA node 0
[ 0.037062] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.037067] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.037068] vgaarb: loaded
[ 0.037071] vgaarb: bridge control possible 0000:01:00.0
[ 0.037240] SCSI subsystem initialized
[ 0.037353] libata version 3.00 loaded.
[ 0.037365] ACPI: bus type USB registered
[ 0.037424] usbcore: registered new interface driver usbfs
[ 0.037452] usbcore: registered new interface driver hub
[ 0.037490] usbcore: registered new device driver usb
[ 0.037555] PCI: Using ACPI for IRQ routing
[ 0.037561] PCI: pci_cache_line_size set to 32 bytes
[ 0.037597] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.037601] e820: reserve RAM buffer [mem 0x1fffd000-0x1fffffff]
[ 0.038338] clocksource: Switched to clocksource pit
[ 0.052096] pnp: PnP ACPI init
[ 0.052457] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.052465] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.052470] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.052475] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.052487] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.053049] system 00:01: [io 0xe400-0xe43f] has been reserved
[ 0.053054] system 00:01: [io 0xe800-0xe80f] has been reserved
[ 0.053059] system 00:01: [io 0x0294-0x0297] has been reserved
[ 0.053064] system 00:01: [io 0x03f0-0x03f1] has been reserved
[ 0.053068] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.053076] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.053159] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.053585] pnp 00:03: [dma 2]
[ 0.053739] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.054584] pnp 00:04: [dma 3]
[ 0.054694] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.055294] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.055996] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.056466] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.056484] pnp: PnP ACPI: found 8 devices
[ 0.056491] PnPBIOS: Disabled
[ 0.095289] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.095331] clocksource: Switched to clocksource acpi_pm
[ 0.095374] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[ 0.095382] pci 0000:00:0a.0: BAR 6: assigned [mem 0x20010000-0x2001ffff pref]
[ 0.095390] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.095394] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.095401] pci 0000:00:01.0: bridge window [mem 0xd6800000-0xd6ffffff]
[ 0.095406] pci 0000:00:01.0: bridge window [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095415] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.095419] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.095423] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.095427] pci_bus 0000:01: resource 1 [mem 0xd6800000-0xd6ffffff]
[ 0.095431] pci_bus 0000:01: resource 2 [mem 0xd7f00000-0xe3ffffff pref]
[ 0.095510] NET: Registered protocol family 2
[ 0.095893] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.095940] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.096024] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.096103] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096128] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.096280] NET: Registered protocol family 1
[ 0.096317] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.096955] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.096959] PCI: setting IRQ 9 as level-triggered
[ 0.097097] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.097101] PCI: CLS 32 bytes, default 32
[ 0.098279] futex hash table entries: 256 (order: 1, 8192 bytes)
[ 0.099086] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.106007] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.106015] io scheduler noop registered
[ 0.106017] io scheduler deadline registered
[ 0.106097] io scheduler cfq registered (default)
[ 0.106636] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.106645] ACPI: Power Button [PWRB]
[ 0.106790] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.106795] ACPI: Power Button [PWRF]
[ 0.106891] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.106980] Warning: Processor Platform Limit event detected, but not handled.
[ 0.106981] Consider compiling CPUfreq support into your kernel.
[ 0.107420] isapnp: Scanning for PnP cards...
[ 0.230225] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.230230] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.230235] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.230330] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 0.230334] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 0.230338] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 0.230342] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 0.230402] 01:01: card 'Creative SB AWE64 PnP'
[ 0.230405] isapnp: 1 Plug & Play card detected total
[ 0.230532] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.251089] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.271750] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.292251] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.312746] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.313153] Non-volatile memory driver v1.3
[ 0.313157] Linux agpgart interface v0.103
[ 0.313212] [drm] Initialized drm 1.1.0 20060810
[ 0.318553] loop: module loaded
[ 0.318686] ata_piix 0000:00:04.1: version 2.13
[ 0.319675] scsi host0: ata_piix
[ 0.319952] scsi host1: ata_piix
[ 0.320151] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 0.320156] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 0.320411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.320414] ehci-pci: EHCI PCI platform driver
[ 0.320440] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.320459] ohci-pci: OHCI PCI platform driver
[ 0.320484] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.320676] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 0.320691] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
[ 0.320735] uhci_hcd 0000:00:04.2: irq 9, io base 0x0000b400
[ 0.321473] hub 1-0:1.0: USB hub found
[ 0.321492] hub 1-0:1.0: 2 ports detected
[ 0.321869] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.325079] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.325093] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.325439] mousedev: PS/2 mouse device common for all mice
[ 0.325868] rtc_cmos 00:02: RTC can wake from S4
[ 0.326060] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.326087] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 0.326482] NET: Registered protocol family 17
[ 0.326643] Using IPI No-Shortcut mode
[ 0.326945] registered taskstats version 1
[ 0.327358] rtc_cmos 00:02: setting system clock to 2016-09-28 18:53:17 UTC (1475088797)
[ 0.327435] PM: Hibernation image not present or could not be loaded.
[ 0.354302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.482749] ata1.00: ATA-7: SAMSUNG SP1213N, TL100-24, max UDMA/100
[ 0.482754] ata1.00: 234493056 sectors, multi 16: LBA48
[ 0.485386] ata1.00: configured for UDMA/33
[ 0.485703] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP1213N 0-24 PQ: 0 ANSI: 5
[ 0.486359] sd 0:0:0:0: [sda] 234493056 512-byte logical blocks: (120 GB/112 GiB)
[ 0.486507] sd 0:0:0:0: [sda] Write Protect is off
[ 0.486512] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.486574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.487138] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R22, max UDMA/33
[ 0.487150] ata2.01: ATAPI: ATAPI COMBO48XMAX, VER 1.50, max UDMA/100
[ 0.491925] ata2.00: configured for UDMA/33
[ 0.496564] ata2.01: configured for UDMA/33
[ 0.501093] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R22 PQ: 0 ANSI: 5
[ 0.514124] scsi 1:0:1:0: CD-ROM ATAPI COMBO48XMAX 1.50 PQ: 0 ANSI: 5
[ 0.521421] sda: sda1 sda2 sda3
[ 0.522279] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.960162] random: fast init done
[ 1.120051] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x13ad257ca30, max_idle_ns: 440795244238 ns
[ 1.935964] input: ImPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4
[ 1.949908] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 1.970348] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.970382] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 1.972222] Freeing unused kernel memory: 524K (c15c1000 - c1644000)
[ 1.972493] Write protecting the kernel text: 3920k
[ 1.972562] Write protecting the kernel read-only data: 1528k
[ 4.327352] systemd-udevd[194]: starting version 215
[ 5.904101] random: crng init done
[ 7.617164] Adding 1048572k swap on /dev/sda2. Priority:-1 extents:1 across:1048572k
[ 7.685443] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.153707] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
next prev parent reply other threads:[~2016-09-28 17:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-25 13:12 4.7 regression: ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off Ondrej Zary
2016-09-26 12:23 ` Rafael J. Wysocki
2016-09-27 21:02 ` Ondrej Zary
2016-09-27 21:32 ` Rafael J. Wysocki
2016-09-27 22:23 ` Ondrej Zary
2016-09-27 22:58 ` Rafael J. Wysocki
2016-09-27 23:06 ` Sinan Kaya
2016-09-28 8:32 ` Ondrej Zary
2016-09-28 14:11 ` Sinan Kaya
2016-09-28 17:02 ` Ondrej Zary [this message]
2016-09-28 18:22 ` Sinan Kaya
2016-09-28 19:23 ` Ondrej Zary
2016-09-28 23:38 ` Sinan Kaya
2016-09-29 9:10 ` Ondrej Zary
2016-09-29 13:09 ` okaya
2016-09-29 13:49 ` Ondrej Zary
2016-09-29 14:28 ` Sinan Kaya
2016-09-29 14:35 ` Sinan Kaya
2016-09-29 16:48 ` Ondrej Zary
2016-09-29 17:18 ` Sinan Kaya
2016-09-29 18:00 ` Ondrej Zary
2016-09-29 22:39 ` Sinan Kaya
2016-09-30 6:44 ` Ondrej Zary
2016-09-30 13:14 ` okaya
2016-09-30 15:56 ` Ondrej Zary
2016-09-30 19:30 ` Sinan Kaya
2016-09-30 19:39 ` Rafael J. Wysocki
2016-09-30 20:24 ` Sinan Kaya
2016-09-30 21:04 ` Rafael J. Wysocki
2016-09-30 21:14 ` Sinan Kaya
2016-09-30 21:27 ` Rafael J. Wysocki
2016-09-30 21:33 ` Sinan Kaya
2016-10-01 17:49 ` Sinan Kaya
2016-10-02 16:53 ` Ondrej Zary
2016-10-03 1:05 ` Sinan Kaya
2016-10-03 7:25 ` Ondrej Zary
2016-10-04 14:30 ` Sinan Kaya
2016-10-04 17:54 ` Ondrej Zary
2016-09-29 14:18 ` Wim Osterholt
2016-09-29 14:31 ` Sinan Kaya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201609281902.31500.linux@rainbow-software.org \
--to=linux@rainbow-software.org \
--cc=bhelgaas@google.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=okaya@codeaurora.org \
--cc=rjw@rjwysocki.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.