From: Axel Haslam <ahaslam@baylibre.com> To: stern@rowland.harvard.edu, gregkh@linuxfoundation.org, nsekhar@ti.com, khilman@kernel.org, david@lechnology.com, robh+dt@kernel.org Cc: devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Axel Haslam <ahaslam@baylibre.com> Subject: [PATCH v3 08/10] USB: ohci: da8xx: Add devicetree bindings Date: Mon, 7 Nov 2016 21:39:46 +0100 [thread overview] Message-ID: <20161107203948.28324-9-ahaslam@baylibre.com> (raw) In-Reply-To: <20161107203948.28324-1-ahaslam@baylibre.com> This patch documents the device tree bindings required for the ohci controller found in TI da8xx family of SoC's Cc: devicetree@vger.kernel.org Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt new file mode 100644 index 0000000..f18e82c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -0,0 +1,39 @@ +DA8XX USB OHCI controller + +Required properties: + + - compatible: Should be "ti,da830-ohci" + - reg: Should contain one register range i.e. start and length + - interrupts: Description of the interrupt line + - phys: Phandle for the PHY device + - phy-names: Should be "usb-phy" + +Optional properties: + - vbus-supply: Regulator that controls vbus power + +Example: + +reg_usb_ohci: regulator@0 { + compatible = "regulator-fixed"; + gpio = <&gpio 109 0>; + over-current-gpios = <&gpio 36 0>; + regulator-boot-on; + enable-active-high; + regulator-name = "usb_ohci_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; +}; + +ohci: usb@0225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + vbus-supply = <®_usb_ohci>; +}; -- 2.10.1
WARNING: multiple messages have this Message-ID (diff)
From: ahaslam@baylibre.com (Axel Haslam) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 08/10] USB: ohci: da8xx: Add devicetree bindings Date: Mon, 7 Nov 2016 21:39:46 +0100 [thread overview] Message-ID: <20161107203948.28324-9-ahaslam@baylibre.com> (raw) In-Reply-To: <20161107203948.28324-1-ahaslam@baylibre.com> This patch documents the device tree bindings required for the ohci controller found in TI da8xx family of SoC's Cc: devicetree at vger.kernel.org Signed-off-by: Axel Haslam <ahaslam@baylibre.com> --- .../devicetree/bindings/usb/ohci-da8xx.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/ohci-da8xx.txt diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt new file mode 100644 index 0000000..f18e82c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -0,0 +1,39 @@ +DA8XX USB OHCI controller + +Required properties: + + - compatible: Should be "ti,da830-ohci" + - reg: Should contain one register range i.e. start and length + - interrupts: Description of the interrupt line + - phys: Phandle for the PHY device + - phy-names: Should be "usb-phy" + +Optional properties: + - vbus-supply: Regulator that controls vbus power + +Example: + +reg_usb_ohci: regulator at 0 { + compatible = "regulator-fixed"; + gpio = <&gpio 109 0>; + over-current-gpios = <&gpio 36 0>; + regulator-boot-on; + enable-active-high; + regulator-name = "usb_ohci_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; +}; + +ohci: usb at 0225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + vbus-supply = <®_usb_ohci>; +}; -- 2.10.1
next prev parent reply other threads:[~2016-11-07 20:41 UTC|newest] Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-07 20:39 [PATCH v3 00/10] Add DT support for ohci-da8xx Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 01/10] USB: ohci: da8xx: use ohci priv data instead of globals Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 02/10] USB: ohci: da8xx: Prepare to remove platform callbacks Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 03/10] USB: ohci: da8xx: Allow a regulator to handle VBUS Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 04/10] ARM: davinci: da830: Handle vbus with a regulator Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 05/10] ARM: davinci: hawk: Remove vbus and over current gpios Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 06/10] USB: ohci: da8xx: Remove ohci platform callbacks Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 07/10] USB: ohci: da8xx: use a flag instead of mask for ocic Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` Axel Haslam [this message] 2016-11-07 20:39 ` [PATCH v3 08/10] USB: ohci: da8xx: Add devicetree bindings Axel Haslam 2016-11-07 20:39 ` [PATCH v3 09/10] USB: ohci: da8xx: Allow probing from DT Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-07 20:39 ` [PATCH v3 10/10] ARM: dts: da850: add usb device node Axel Haslam 2016-11-07 20:39 ` Axel Haslam 2016-11-21 2:42 ` David Lechner 2016-11-21 2:42 ` David Lechner 2016-11-21 2:42 ` David Lechner 2016-11-21 10:27 ` Axel Haslam 2016-11-21 10:27 ` Axel Haslam 2016-11-21 10:46 ` Sekhar Nori 2016-11-21 10:46 ` Sekhar Nori 2016-11-21 10:46 ` Sekhar Nori 2016-11-21 10:49 ` Sekhar Nori 2016-11-21 10:49 ` Sekhar Nori 2016-11-21 10:49 ` Sekhar Nori 2016-11-21 10:53 ` Axel Haslam 2016-11-21 10:53 ` Axel Haslam 2016-11-21 10:53 ` Axel Haslam 2016-11-08 16:37 ` [PATCH v3 00/10] Add DT support for ohci-da8xx Axel Haslam 2016-11-08 16:37 ` Axel Haslam 2016-11-10 12:02 ` Greg KH 2016-11-10 12:02 ` Greg KH 2016-11-10 17:28 ` Axel Haslam 2016-11-10 17:28 ` Axel Haslam 2016-11-10 17:28 ` Axel Haslam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20161107203948.28324-9-ahaslam@baylibre.com \ --to=ahaslam@baylibre.com \ --cc=david@lechnology.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=khilman@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=nsekhar@ti.com \ --cc=robh+dt@kernel.org \ --cc=stern@rowland.harvard.edu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.