From: marcel@ziswiler.com To: devicetree@vger.kernel.org Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>, Thierry Reding <thierry.reding@gmail.com>, linux-kernel@vger.kernel.org, Stephen Warren <swarren@wwwdotorg.org>, Rob Herring <robh+dt@kernel.org>, linux-tegra@vger.kernel.org, Mark Rutland <mark.rutland@arm.com>, Alexandre Courbot <gnurou@gmail.com>, Russell King <linux@armlinux.org.uk>, linux-arm-kernel@lists.infradead.org Subject: [RESEND PATCH 1/6] apalis-tk1: remove spurious new lines Date: Thu, 24 Nov 2016 02:04:51 +0100 [thread overview] Message-ID: <20161124010456.24604-2-marcel@ziswiler.com> (raw) In-Reply-To: <20161124010456.24604-1-marcel@ziswiler.com> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> Remove some spurious new lines. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> --- arch/arm/boot/dts/tegra124-apalis-eval.dts | 1 - arch/arm/boot/dts/tegra124-apalis.dtsi | 12 ------------ 2 files changed, 13 deletions(-) diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 653044a..2b5a0f3 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -232,7 +232,6 @@ backlight: backlight { compatible = "pwm-backlight"; - /* BKL1_PWM */ pwms = <&pwm 3 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 0819721..6aa4952 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -56,7 +56,6 @@ pcie-controller@01003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; avdd-pex-pll-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; @@ -85,7 +84,6 @@ hdmi@54280000 { pll-supply = <®_1v05_avdd_hdmi_pll>; vdd-supply = <®_3v3_avdd_hdmi>; - nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -1607,15 +1605,11 @@ compatible = "ams,as3722"; reg = <0x40>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - ams,system-power-controller; - #interrupt-cells = <2>; interrupt-controller; - gpio-controller; #gpio-cells = <2>; - pinctrl-names = "default"; pinctrl-0 = <&as3722_default>; @@ -1790,7 +1784,6 @@ reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; }; }; @@ -1823,7 +1816,6 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; hvdd-supply = <®_3v3>; vddio-supply = <&vdd_1v05>; @@ -1837,7 +1829,6 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; avdd-pll-utmip-supply = <&vddio_1v8>; @@ -1919,7 +1910,6 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <®_usbo1_vbus>; }; @@ -1927,7 +1917,6 @@ usb2-1 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; @@ -1935,7 +1924,6 @@ usb2-2 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; -- 2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: marcel@ziswiler.com (marcel at ziswiler.com) To: linux-arm-kernel@lists.infradead.org Subject: [RESEND PATCH 1/6] apalis-tk1: remove spurious new lines Date: Thu, 24 Nov 2016 02:04:51 +0100 [thread overview] Message-ID: <20161124010456.24604-2-marcel@ziswiler.com> (raw) In-Reply-To: <20161124010456.24604-1-marcel@ziswiler.com> From: Marcel Ziswiler <marcel.ziswiler@toradex.com> Remove some spurious new lines. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> --- arch/arm/boot/dts/tegra124-apalis-eval.dts | 1 - arch/arm/boot/dts/tegra124-apalis.dtsi | 12 ------------ 2 files changed, 13 deletions(-) diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts index 653044a..2b5a0f3 100644 --- a/arch/arm/boot/dts/tegra124-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -232,7 +232,6 @@ backlight: backlight { compatible = "pwm-backlight"; - /* BKL1_PWM */ pwms = <&pwm 3 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index 0819721..6aa4952 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -56,7 +56,6 @@ pcie-controller at 01003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; avdd-pex-pll-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; @@ -85,7 +84,6 @@ hdmi at 54280000 { pll-supply = <®_1v05_avdd_hdmi_pll>; vdd-supply = <®_3v3_avdd_hdmi>; - nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -1607,15 +1605,11 @@ compatible = "ams,as3722"; reg = <0x40>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - ams,system-power-controller; - #interrupt-cells = <2>; interrupt-controller; - gpio-controller; #gpio-cells = <2>; - pinctrl-names = "default"; pinctrl-0 = <&as3722_default>; @@ -1790,7 +1784,6 @@ reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; - #thermal-sensor-cells = <1>; }; }; @@ -1823,7 +1816,6 @@ sata at 70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; hvdd-supply = <®_3v3>; vddio-supply = <&vdd_1v05>; @@ -1837,7 +1829,6 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; avdd-pll-erefe-supply = <&avdd_1v05>; avdd-pll-utmip-supply = <&vddio_1v8>; @@ -1919,7 +1910,6 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <®_usbo1_vbus>; }; @@ -1927,7 +1917,6 @@ usb2-1 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; @@ -1935,7 +1924,6 @@ usb2-2 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; -- 2.9.3
next prev parent reply other threads:[~2016-11-24 1:04 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-24 1:04 [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw marcel 2016-11-24 1:04 ` marcel at ziswiler.com 2016-11-24 1:04 ` marcel [this message] 2016-11-24 1:04 ` [RESEND PATCH 1/6] apalis-tk1: remove spurious new lines marcel at ziswiler.com 2016-11-24 1:04 ` [RESEND PATCH 2/6] apalis-tk1: temp alert pull-up marcel 2016-11-24 1:04 ` marcel at ziswiler.com [not found] ` <20161124010456.24604-1-marcel-mitwqZ+T+m9Wk0Htik3J/w@public.gmane.org> 2016-11-24 1:04 ` [RESEND PATCH 3/6] apalis-tk1: optional displayport hot-plug detect marcel-mitwqZ+T+m9Wk0Htik3J/w 2016-11-24 1:04 ` marcel at ziswiler.com 2016-11-24 1:04 ` marcel 2016-11-24 1:04 ` [RESEND PATCH 4/6] apalis-tk1: adjust pin muxing for v1.1 hw marcel 2016-11-24 1:04 ` marcel at ziswiler.com 2016-11-24 1:04 ` marcel 2016-11-24 1:04 ` [RESEND PATCH 5/6] apalis-tk1: working sd card detect on " marcel 2016-11-24 1:04 ` marcel at ziswiler.com 2016-11-24 1:04 ` [RESEND PATCH 6/6] apalis-tk1: update compatibility comment marcel 2016-11-24 1:04 ` marcel at ziswiler.com 2017-01-03 13:20 ` [RESEND PATCH 0/6] apalis-tk1: updates for v1.1 hw Marcel Ziswiler 2017-01-03 13:20 ` Marcel Ziswiler 2017-01-03 13:20 ` Marcel Ziswiler [not found] ` <1483449646.2745.1.camel-2KBjVHiyJgBBDgjK7y7TUQ@public.gmane.org> 2017-01-25 6:56 ` Thierry Reding 2017-01-25 6:56 ` Thierry Reding 2017-01-25 6:56 ` Thierry Reding
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20161124010456.24604-2-marcel@ziswiler.com \ --to=marcel@ziswiler.com \ --cc=devicetree@vger.kernel.org \ --cc=gnurou@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=marcel.ziswiler@toradex.com \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=swarren@wwwdotorg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.