Re: [PATCH 1/6] net: ethernet: ti: netcp: add support of cpts

[Rob Herring <robh@kernel.org>]

On Mon, Nov 28, 2016 at 05:04:23PM -0600, Grygorii Strashko wrote:
> From: WingMan Kwok <w-kwok2@ti.com>
> 
> This patch adds support of the cpts device found in the
> gbe and 10gbe ethernet switches on the keystone 2 SoCs
> (66AK2E/L/Hx, 66AK2Gx).
> 
> Signed-off-by: WingMan Kwok <w-kwok2@ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
>  .../devicetree/bindings/net/keystone-netcp.txt     |   9 +
>  drivers/net/ethernet/ti/Kconfig                    |   7 +-
>  drivers/net/ethernet/ti/netcp.h                    |   2 +-
>  drivers/net/ethernet/ti/netcp_core.c               |  18 +-
>  drivers/net/ethernet/ti/netcp_ethss.c              | 437 ++++++++++++++++++++-
>  5 files changed, 459 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
> index 04ba1dc..c37b54e 100644
> --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt
> +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
> @@ -113,6 +113,15 @@ Optional properties:
>  				will only initialize these ports and attach PHY
>  				driver to them if needed.
>  
> + Properties related to cpts configurations.
> +	- cpts_clock_mult/cpts_clock_shift:

Needs vendor prefix. Don't use '_'.

> +		used for converting time counter cycles to ns as in
> +
> +		ns = (cycles * clock_mult) >> _shift
> +
> +		Defaults: clock_mult, clock_shift = calculated from
> +		CPTS refclk

What does this mean?

> +
>  NetCP interface properties: Interface specification for NetCP sub-modules.
>  Required properties:
>  - rx-channel:	the navigator packet dma channel name for rx.