[PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[codekipper-Re5JQEeQqe8AvxtiuMwx3w]

From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

This patch adds the regulator nodes for the axp209 by including
the axp209 dtsi.

Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 68c6bdb2cf7c..e7394d701856 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -196,6 +196,40 @@
 	};
 };
 
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-wifi";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
-- 
2.11.0

[linux-sunxi][PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[codekipper at gmail.com]

From: Marcus Cooper <codekipper@gmail.com>

This patch adds the regulator nodes for the axp209 by including
the axp209 dtsi.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 68c6bdb2cf7c..e7394d701856 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -196,6 +196,40 @@
 	};
 };
 
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-wifi";
+};
+
 &reg_usb1_vbus {
 	status = "okay";
 };
-- 
2.11.0

Re: [linux-sunxi][PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1836 bytes --]

On Tue, Dec 20, 2016 at 11:22:42AM +0100, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> 
> This patch adds the regulator nodes for the axp209 by including
> the axp209 dtsi.
> 
> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index 68c6bdb2cf7c..e7394d701856 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -196,6 +196,40 @@
>  	};
>  };
>  
> +#include "axp209.dtsi"
> +
> +&reg_dcdc2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1400000>;
> +	regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1250000>;
> +	regulator-name = "vdd-int-dll";
> +};
> +
> +&reg_ldo1 {
> +	regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <3000000>;
> +	regulator-max-microvolt = <3000000>;
> +	regulator-name = "avcc";
> +};
> +
> +&reg_ldo3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <2800000>;
> +	regulator-max-microvolt = <2800000>;
> +	regulator-name = "vcc-wifi";

If this is used only for the wifi, there's no point in keeping it
enabled.

Also, taking the chance to enable cpufreq by setting the cpu-suplly
property would be a good idea.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

[linux-sunxi][PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[Maxime Ripard]

On Tue, Dec 20, 2016 at 11:22:42AM +0100, codekipper at gmail.com wrote:
> From: Marcus Cooper <codekipper@gmail.com>
> 
> This patch adds the regulator nodes for the axp209 by including
> the axp209 dtsi.
> 
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
>  arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> index 68c6bdb2cf7c..e7394d701856 100644
> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
> @@ -196,6 +196,40 @@
>  	};
>  };
>  
> +#include "axp209.dtsi"
> +
> +&reg_dcdc2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1400000>;
> +	regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1250000>;
> +	regulator-name = "vdd-int-dll";
> +};
> +
> +&reg_ldo1 {
> +	regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <3000000>;
> +	regulator-max-microvolt = <3000000>;
> +	regulator-name = "avcc";
> +};
> +
> +&reg_ldo3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <2800000>;
> +	regulator-max-microvolt = <2800000>;
> +	regulator-name = "vcc-wifi";

If this is used only for the wifi, there's no point in keeping it
enabled.

Also, taking the chance to enable cpufreq by setting the cpu-suplly
property would be a good idea.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161220/6f56d8f4/attachment-0001.sig>

Re: [PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[Code Kipper]

On 20 December 2016 at 15:16, Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> wrote:
> On Tue, Dec 20, 2016 at 11:22:42AM +0100, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
>> From: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>>
>> This patch adds the regulator nodes for the axp209 by including
>> the axp209 dtsi.
>>
>> Signed-off-by: Marcus Cooper <codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
>>  1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> index 68c6bdb2cf7c..e7394d701856 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> @@ -196,6 +196,40 @@
>>       };
>>  };
>>
>> +#include "axp209.dtsi"
>> +
>> +&reg_dcdc2 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <1000000>;
>> +     regulator-max-microvolt = <1400000>;
>> +     regulator-name = "vdd-cpu";
>> +};
>> +
>> +&reg_dcdc3 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <1000000>;
>> +     regulator-max-microvolt = <1250000>;
>> +     regulator-name = "vdd-int-dll";
>> +};
>> +
>> +&reg_ldo1 {
>> +     regulator-name = "vdd-rtc";
>> +};
>> +
>> +&reg_ldo2 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <3000000>;
>> +     regulator-max-microvolt = <3000000>;
>> +     regulator-name = "avcc";
>> +};
>> +
>> +&reg_ldo3 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <2800000>;
>> +     regulator-max-microvolt = <2800000>;
>> +     regulator-name = "vcc-wifi";
>
> If this is used only for the wifi, there's no point in keeping it
> enabled.
>
> Also, taking the chance to enable cpufreq by setting the cpu-suplly
> property would be a good idea.
Ack....fortunately my A1000 was out of it's box as I've been looking
at the channel reversal issue. I'll respin now.
CK
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com

[linux-sunxi][PATCH] ARM: dts: sun4i: A1000: add axp209 regulator nodes

[Code Kipper]

On 20 December 2016 at 15:16, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Tue, Dec 20, 2016 at 11:22:42AM +0100, codekipper at gmail.com wrote:
>> From: Marcus Cooper <codekipper@gmail.com>
>>
>> This patch adds the regulator nodes for the axp209 by including
>> the axp209 dtsi.
>>
>> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
>> ---
>>  arch/arm/boot/dts/sun4i-a10-a1000.dts | 34 ++++++++++++++++++++++++++++++++++
>>  1 file changed, 34 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> index 68c6bdb2cf7c..e7394d701856 100644
>> --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
>> @@ -196,6 +196,40 @@
>>       };
>>  };
>>
>> +#include "axp209.dtsi"
>> +
>> +&reg_dcdc2 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <1000000>;
>> +     regulator-max-microvolt = <1400000>;
>> +     regulator-name = "vdd-cpu";
>> +};
>> +
>> +&reg_dcdc3 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <1000000>;
>> +     regulator-max-microvolt = <1250000>;
>> +     regulator-name = "vdd-int-dll";
>> +};
>> +
>> +&reg_ldo1 {
>> +     regulator-name = "vdd-rtc";
>> +};
>> +
>> +&reg_ldo2 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <3000000>;
>> +     regulator-max-microvolt = <3000000>;
>> +     regulator-name = "avcc";
>> +};
>> +
>> +&reg_ldo3 {
>> +     regulator-always-on;
>> +     regulator-min-microvolt = <2800000>;
>> +     regulator-max-microvolt = <2800000>;
>> +     regulator-name = "vcc-wifi";
>
> If this is used only for the wifi, there's no point in keeping it
> enabled.
>
> Also, taking the chance to enable cpufreq by setting the cpu-suplly
> property would be a good idea.
Ack....fortunately my A1000 was out of it's box as I've been looking
at the channel reversal issue. I'll respin now.
CK
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com