Re: [RFC PATCH] mm, memcg: fix (Re: OOM: Better, but still there on)

[Minchan Kim <minchan@kernel.org>]

On Thu, Dec 29, 2016 at 09:31:54AM +0900, Minchan Kim wrote:
> On Mon, Dec 26, 2016 at 01:48:40PM +0100, Michal Hocko wrote:
> > On Fri 23-12-16 23:26:00, Nils Holland wrote:
> > > On Fri, Dec 23, 2016 at 03:47:39PM +0100, Michal Hocko wrote:
> > > > 
> > > > Nils, even though this is still highly experimental, could you give it a
> > > > try please?
> > > 
> > > Yes, no problem! So I kept the very first patch you sent but had to
> > > revert the latest version of the debugging patch (the one in
> > > which you added the "mm_vmscan_inactive_list_is_low" event) because
> > > otherwise the patch you just sent wouldn't apply. Then I rebooted with
> > > memory cgroups enabled again, and the first thing that strikes the eye
> > > is that I get this during boot:
> > > 
> > > [    1.568174] ------------[ cut here ]------------
> > > [    1.568327] WARNING: CPU: 0 PID: 1 at mm/memcontrol.c:1032 mem_cgroup_update_lru_size+0x118/0x130
> > > [    1.568543] mem_cgroup_update_lru_size(f4406400, 2, 1): lru_size 0 but not empty
> > 
> > Ohh, I can see what is wrong! a) there is a bug in the accounting in
> > my patch (I double account) and b) the detection for the empty list
> > cannot work after my change because per node zone will not match per
> > zone statistics. The updated patch is below. So I hope my brain already
> > works after it's been mostly off last few days...
> > ---
> > From 397adf46917b2d9493180354a7b0182aee280a8b Mon Sep 17 00:00:00 2001
> > From: Michal Hocko <mhocko@suse.com>
> > Date: Fri, 23 Dec 2016 15:11:54 +0100
> > Subject: [PATCH] mm, memcg: fix the active list aging for lowmem requests when
> >  memcg is enabled
> > 
> > Nils Holland has reported unexpected OOM killer invocations with 32b
> > kernel starting with 4.8 kernels
> > 
> > 	kworker/u4:5 invoked oom-killer: gfp_mask=0x2400840(GFP_NOFS|__GFP_NOFAIL), nodemask=0, order=0, oom_score_adj=0
> > 	kworker/u4:5 cpuset=/ mems_allowed=0
> > 	CPU: 1 PID: 2603 Comm: kworker/u4:5 Not tainted 4.9.0-gentoo #2
> > 	[...]
> > 	Mem-Info:
> > 	active_anon:58685 inactive_anon:90 isolated_anon:0
> > 	 active_file:274324 inactive_file:281962 isolated_file:0
> > 	 unevictable:0 dirty:649 writeback:0 unstable:0
> > 	 slab_reclaimable:40662 slab_unreclaimable:17754
> > 	 mapped:7382 shmem:202 pagetables:351 bounce:0
> > 	 free:206736 free_pcp:332 free_cma:0
> > 	Node 0 active_anon:234740kB inactive_anon:360kB active_file:1097296kB inactive_file:1127848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:29528kB dirty:2596kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 184320kB anon_thp: 808kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no
> > 	DMA free:3952kB min:788kB low:984kB high:1180kB active_anon:0kB inactive_anon:0kB active_file:7316kB inactive_file:0kB unevictable:0kB writepending:96kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:3200kB slab_unreclaimable:1408kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
> > 	lowmem_reserve[]: 0 813 3474 3474
> > 	Normal free:41332kB min:41368kB low:51708kB high:62048kB active_anon:0kB inactive_anon:0kB active_file:532748kB inactive_file:44kB unevictable:0kB writepending:24kB present:897016kB managed:836248kB mlocked:0kB slab_reclaimable:159448kB slab_unreclaimable:69608kB kernel_stack:1112kB pagetables:1404kB bounce:0kB free_pcp:528kB local_pcp:340kB free_cma:0kB
> > 	lowmem_reserve[]: 0 0 21292 21292
> > 	HighMem free:781660kB min:512kB low:34356kB high:68200kB active_anon:234740kB inactive_anon:360kB active_file:557232kB inactive_file:1127804kB unevictable:0kB writepending:2592kB present:2725384kB managed:2725384kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:800kB local_pcp:608kB free_cma:0kB
> > 
> > the oom killer is clearly pre-mature because there there is still a
> > lot of page cache in the zone Normal which should satisfy this lowmem
> > request. Further debugging has shown that the reclaim cannot make any
> > forward progress because the page cache is hidden in the active list
> > which doesn't get rotated because inactive_list_is_low is not memcg
> > aware.
> > It simply subtracts per-zone highmem counters from the respective
> > memcg's lru sizes which doesn't make any sense. We can simply end up
> > always seeing the resulting active and inactive counts 0 and return
> > false. This issue is not limited to 32b kernels but in practice the
> > effect on systems without CONFIG_HIGHMEM would be much harder to notice
> > because we do not invoke the OOM killer for allocations requests
> > targeting < ZONE_NORMAL.
> > 
> > Fix the issue by tracking per zone lru page counts in mem_cgroup_per_node
> > and subtract per-memcg highmem counts when memcg is enabled. Introduce
> > helper lruvec_zone_lru_size which redirects to either zone counters or
> > mem_cgroup_get_zone_lru_size when appropriate.
> > 
> > We are loosing empty LRU but non-zero lru size detection introduced by
> > ca707239e8a7 ("mm: update_lru_size warn and reset bad lru_size") because
> > of the inherent zone vs. node discrepancy.
> > 
> > Fixes: f8d1a31163fc ("mm: consider whether to decivate based on eligible zones inactive ratio")
> > Cc: stable # 4.8+
> > Reported-by: Nils Holland <nholland@tisys.org>
> > Signed-off-by: Michal Hocko <mhocko@suse.com>
> Acked-by: Minchan Kim <minchan@kernel.org>

Nit:

WARNING: line over 80 characters
#53: FILE: include/linux/memcontrol.h:689:
+unsigned long mem_cgroup_get_zone_lru_size(struct lruvec *lruvec, enum lru_list lru,

WARNING: line over 80 characters
#147: FILE: mm/vmscan.c:248:
+unsigned long lruvec_zone_lru_size(struct lruvec *lruvec, enum lru_list lru, int zone_idx)

WARNING: line over 80 characters
#177: FILE: mm/vmscan.c:1446:
+               mem_cgroup_update_lru_size(lruvec, lru, zid, -nr_zone_taken[zid]);

WARNING: line over 80 characters
#201: FILE: mm/vmscan.c:2099:
+               inactive_zone = lruvec_zone_lru_size(lruvec, file * LRU_FILE, zid);

WARNING: line over 80 characters
#202: FILE: mm/vmscan.c:2100:
+               active_zone = lruvec_zone_lru_size(lruvec, (file * LRU_FILE) + LRU_ACTIVE, zid);