[PATCH v2 0/8] PM / devfreq: Update the devfreq and devfreq-event device

[PATCH v2 0/8] PM / devfreq: Update the devfreq and devfreq-event device

[Chanwoo Choi]

This patches update the devfreq and devfreq-event device. I add the summary
of each patch as following.

- Patch1 is documented for bus frequency scaling of Exynos5433's VDD_INT.
  The related-to patches[1] were merged by Exynos SoC maintainer.
- Patch2 uses the regmap interface instead of raw_read/write function.
- Patch3/4 print the useful log for exynos-bus.c and exynos-ppmu.c driver.
- Patch5 fixes the checkpatch warning of devfreq.c.
- Patch6/7 modify the name of sysfs entry for devfreq/devfreq-event device
- Patch8 fixes the wrong description of govenro_userspace.c.

Changes from v1:
- Rebase these patches on v4.10-rc1.
- Include the separate patch[2] in these patches.

[1] https://lkml.org/lkml/2016/12/7/846
- [PATCH v2 0/5] arm64: dts: Enable bus frequency scaling on Exynos5433-based TM2 board
[2] https://lkml.org/lkml/2016/12/16/7
- [PATCH] PM / devfreq: Fix the wrong description for userspace governor


Depends on:
- These patches depend on both v4.10-rc1 and patches[3].

[3] https://lkml.org/lkml/2016/12/28/91
- [PATCH v2 0/3] PM / devfreq: Fix the bug and add reviewer for devfreq support

Chanwoo Choi (8):
  PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
  PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers
  PM / devfreq: exynos-bus: Print the real clock rate of bus
  PM / devfreq: exynos-ppmu: Show the registred device for ppmu device
  PM / devfreq: Fix the checkpatch warnings
  PM / devfreq: Modify the device name as devfreq[X] for sysfs
  PM / devfreq: Simplify the sysfs name of devfreq-event device
  PM / devfreq: Fix the wrong description for userspace governor

 .../devicetree/bindings/devfreq/exynos-bus.txt     |  14 +
 drivers/devfreq/devfreq-event.c                    |   2 +-
 drivers/devfreq/devfreq.c                          |  17 +-
 drivers/devfreq/event/exynos-ppmu.c                | 331 +++++++++++++++------
 drivers/devfreq/exynos-bus.c                       |   8 +-
 drivers/devfreq/governor_userspace.c               |   3 +-
 6 files changed, 271 insertions(+), 104 deletions(-)

-- 
1.9.1

[PATCH v2 2/8] PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers

[Chanwoo Choi]

This patch uses the regmap interface to read and write the registers for exynos
PPMU device instead of the legacy memory map functions.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/event/exynos-ppmu.c | 326 ++++++++++++++++++++++++++----------
 1 file changed, 237 insertions(+), 89 deletions(-)

diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
index 107eb91a9415..fb3706faf5bd 100644
--- a/drivers/devfreq/event/exynos-ppmu.c
+++ b/drivers/devfreq/event/exynos-ppmu.c
@@ -17,13 +17,13 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/suspend.h>
 #include <linux/devfreq-event.h>
 
 #include "exynos-ppmu.h"
 
 struct exynos_ppmu_data {
-	void __iomem *base;
 	struct clk *clk;
 };
 
@@ -33,6 +33,7 @@ struct exynos_ppmu {
 	unsigned int num_events;
 
 	struct device *dev;
+	struct regmap *regmap;
 
 	struct exynos_ppmu_data ppmu;
 };
@@ -107,20 +108,28 @@ static int exynos_ppmu_find_ppmu_id(struct devfreq_event_dev *edev)
 static int exynos_ppmu_disable(struct devfreq_event_dev *edev)
 {
 	struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
+	int ret;
 	u32 pmnc;
 
 	/* Disable all counters */
-	__raw_writel(PPMU_CCNT_MASK |
-		     PPMU_PMCNT0_MASK |
-		     PPMU_PMCNT1_MASK |
-		     PPMU_PMCNT2_MASK |
-		     PPMU_PMCNT3_MASK,
-		     info->ppmu.base + PPMU_CNTENC);
+	ret = regmap_write(info->regmap, PPMU_CNTENC,
+				PPMU_CCNT_MASK |
+				PPMU_PMCNT0_MASK |
+				PPMU_PMCNT1_MASK |
+				PPMU_PMCNT2_MASK |
+				PPMU_PMCNT3_MASK);
+	if (ret < 0)
+		return ret;
 
 	/* Disable PPMU */
-	pmnc = __raw_readl(info->ppmu.base + PPMU_PMNC);
+	ret = regmap_read(info->regmap, PPMU_PMNC, &pmnc);
+	if (ret < 0)
+		return ret;
+
 	pmnc &= ~PPMU_PMNC_ENABLE_MASK;
-	__raw_writel(pmnc, info->ppmu.base + PPMU_PMNC);
+	ret = regmap_write(info->regmap, PPMU_PMNC, pmnc);
+	if (ret < 0)
+		return ret;
 
 	return 0;
 }
@@ -129,29 +138,42 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev)
 {
 	struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
 	int id = exynos_ppmu_find_ppmu_id(edev);
+	int ret;
 	u32 pmnc, cntens;
 
 	if (id < 0)
 		return id;
 
 	/* Enable specific counter */
-	cntens = __raw_readl(info->ppmu.base + PPMU_CNTENS);
+	ret = regmap_read(info->regmap, PPMU_CNTENS, &cntens);
+	if (ret < 0)
+		return ret;
+
 	cntens |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
-	__raw_writel(cntens, info->ppmu.base + PPMU_CNTENS);
+	ret = regmap_write(info->regmap, PPMU_CNTENS, cntens);
+	if (ret < 0)
+		return ret;
 
 	/* Set the event of Read/Write data count  */
-	__raw_writel(PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT,
-			info->ppmu.base + PPMU_BEVTxSEL(id));
+	ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id),
+				PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT);
+	if (ret < 0)
+		return ret;
 
 	/* Reset cycle counter/performance counter and enable PPMU */
-	pmnc = __raw_readl(info->ppmu.base + PPMU_PMNC);
+	ret = regmap_read(info->regmap, PPMU_PMNC, &pmnc);
+	if (ret < 0)
+		return ret;
+
 	pmnc &= ~(PPMU_PMNC_ENABLE_MASK
 			| PPMU_PMNC_COUNTER_RESET_MASK
 			| PPMU_PMNC_CC_RESET_MASK);
 	pmnc |= (PPMU_ENABLE << PPMU_PMNC_ENABLE_SHIFT);
 	pmnc |= (PPMU_ENABLE << PPMU_PMNC_COUNTER_RESET_SHIFT);
 	pmnc |= (PPMU_ENABLE << PPMU_PMNC_CC_RESET_SHIFT);
-	__raw_writel(pmnc, info->ppmu.base + PPMU_PMNC);
+	ret = regmap_write(info->regmap, PPMU_PMNC, pmnc);
+	if (ret < 0)
+		return ret;
 
 	return 0;
 }
@@ -161,40 +183,64 @@ static int exynos_ppmu_get_event(struct devfreq_event_dev *edev,
 {
 	struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
 	int id = exynos_ppmu_find_ppmu_id(edev);
-	u32 pmnc, cntenc;
+	unsigned int total_count, load_count;
+	unsigned int pmcnt3_high, pmcnt3_low;
+	unsigned int pmnc, cntenc;
+	int ret;
 
 	if (id < 0)
 		return -EINVAL;
 
 	/* Disable PPMU */
-	pmnc = __raw_readl(info->ppmu.base + PPMU_PMNC);
+	ret = regmap_read(info->regmap, PPMU_PMNC, &pmnc);
+	if (ret < 0)
+		return ret;
+
 	pmnc &= ~PPMU_PMNC_ENABLE_MASK;
-	__raw_writel(pmnc, info->ppmu.base + PPMU_PMNC);
+	ret = regmap_write(info->regmap, PPMU_PMNC, pmnc);
+	if (ret < 0)
+		return ret;
 
 	/* Read cycle count */
-	edata->total_count = __raw_readl(info->ppmu.base + PPMU_CCNT);
+	ret = regmap_read(info->regmap, PPMU_CCNT, &total_count);
+	if (ret < 0)
+		return ret;
+	edata->total_count = total_count;
 
 	/* Read performance count */
 	switch (id) {
 	case PPMU_PMNCNT0:
 	case PPMU_PMNCNT1:
 	case PPMU_PMNCNT2:
-		edata->load_count
-			= __raw_readl(info->ppmu.base + PPMU_PMNCT(id));
+		ret = regmap_read(info->regmap, PPMU_PMNCT(id), &load_count);
+		if (ret < 0)
+			return ret;
+		edata->load_count = load_count;
 		break;
 	case PPMU_PMNCNT3:
-		edata->load_count =
-			((__raw_readl(info->ppmu.base + PPMU_PMCNT3_HIGH) << 8)
-			| __raw_readl(info->ppmu.base + PPMU_PMCNT3_LOW));
+		ret = regmap_read(info->regmap, PPMU_PMCNT3_HIGH, &pmcnt3_high);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read(info->regmap, PPMU_PMCNT3_LOW, &pmcnt3_low);
+		if (ret < 0)
+			return ret;
+
+		edata->load_count = ((pmcnt3_high << 8) | pmcnt3_low);
 		break;
 	default:
 		return -EINVAL;
 	}
 
 	/* Disable specific counter */
-	cntenc = __raw_readl(info->ppmu.base + PPMU_CNTENC);
+	ret = regmap_read(info->regmap, PPMU_CNTENC, &cntenc);
+	if (ret < 0)
+		return ret;
+
 	cntenc |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
-	__raw_writel(cntenc, info->ppmu.base + PPMU_CNTENC);
+	ret = regmap_write(info->regmap, PPMU_CNTENC, cntenc);
+	if (ret < 0)
+		return ret;
 
 	dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name,
 					edata->load_count, edata->total_count);
@@ -214,36 +260,93 @@ static int exynos_ppmu_get_event(struct devfreq_event_dev *edev,
 static int exynos_ppmu_v2_disable(struct devfreq_event_dev *edev)
 {
 	struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
+	int ret;
 	u32 pmnc, clear;
 
 	/* Disable all counters */
 	clear = (PPMU_CCNT_MASK | PPMU_PMCNT0_MASK | PPMU_PMCNT1_MASK
 		| PPMU_PMCNT2_MASK | PPMU_PMCNT3_MASK);
+	ret = regmap_write(info->regmap, PPMU_V2_FLAG, clear);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_INTENC, clear);
+	if (ret < 0)
+		return ret;
 
-	__raw_writel(clear, info->ppmu.base + PPMU_V2_FLAG);
-	__raw_writel(clear, info->ppmu.base + PPMU_V2_INTENC);
-	__raw_writel(clear, info->ppmu.base + PPMU_V2_CNTENC);
-	__raw_writel(clear, info->ppmu.base + PPMU_V2_CNT_RESET);
-
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CIG_CFG0);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CIG_CFG1);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CIG_CFG2);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CIG_RESULT);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CNT_AUTO);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CH_EV0_TYPE);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CH_EV1_TYPE);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CH_EV2_TYPE);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_CH_EV3_TYPE);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_SM_ID_V);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_SM_ID_A);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_SM_OTHERS_V);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_SM_OTHERS_A);
-	__raw_writel(0x0, info->ppmu.base + PPMU_V2_INTERRUPT_RESET);
+	ret = regmap_write(info->regmap, PPMU_V2_CNTENC, clear);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CNT_RESET, clear);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CIG_CFG0, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CIG_CFG1, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CIG_CFG2, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CIG_RESULT, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CNT_AUTO, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CH_EV0_TYPE, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CH_EV1_TYPE, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CH_EV2_TYPE, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_CH_EV3_TYPE, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_SM_ID_V, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_SM_ID_A, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_SM_OTHERS_V, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_SM_OTHERS_A, 0x0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(info->regmap, PPMU_V2_INTERRUPT_RESET, 0x0);
+	if (ret < 0)
+		return ret;
 
 	/* Disable PPMU */
-	pmnc = __raw_readl(info->ppmu.base + PPMU_V2_PMNC);
+	ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
+	if (ret < 0)
+		return ret;
+
 	pmnc &= ~PPMU_PMNC_ENABLE_MASK;
-	__raw_writel(pmnc, info->ppmu.base + PPMU_V2_PMNC);
+	ret = regmap_write(info->regmap, PPMU_V2_PMNC, pmnc);
+	if (ret < 0)
+		return ret;
 
 	return 0;
 }
@@ -251,30 +354,43 @@ static int exynos_ppmu_v2_disable(struct devfreq_event_dev *edev)
 static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev)
 {
 	struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
+	unsigned int pmnc, cntens;
 	int id = exynos_ppmu_find_ppmu_id(edev);
-	u32 pmnc, cntens;
+	int ret;
 
 	/* Enable all counters */
-	cntens = __raw_readl(info->ppmu.base + PPMU_V2_CNTENS);
+	ret = regmap_read(info->regmap, PPMU_V2_CNTENS, &cntens);
+	if (ret < 0)
+		return ret;
+
 	cntens |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
-	__raw_writel(cntens, info->ppmu.base + PPMU_V2_CNTENS);
+	ret = regmap_write(info->regmap, PPMU_V2_CNTENS, cntens);
+	if (ret < 0)
+		return ret;
 
 	/* Set the event of Read/Write data count  */
 	switch (id) {
 	case PPMU_PMNCNT0:
 	case PPMU_PMNCNT1:
 	case PPMU_PMNCNT2:
-		__raw_writel(PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT,
-				info->ppmu.base + PPMU_V2_CH_EVx_TYPE(id));
+		ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
+				PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT);
+		if (ret < 0)
+			return ret;
 		break;
 	case PPMU_PMNCNT3:
-		__raw_writel(PPMU_V2_EVT3_RW_DATA_CNT,
-				info->ppmu.base + PPMU_V2_CH_EVx_TYPE(id));
+		ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
+				PPMU_V2_EVT3_RW_DATA_CNT);
+		if (ret < 0)
+			return ret;
 		break;
 	}
 
 	/* Reset cycle counter/performance counter and enable PPMU */
-	pmnc = __raw_readl(info->ppmu.base + PPMU_V2_PMNC);
+	ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
+	if (ret < 0)
+		return ret;
+
 	pmnc &= ~(PPMU_PMNC_ENABLE_MASK
 			| PPMU_PMNC_COUNTER_RESET_MASK
 			| PPMU_PMNC_CC_RESET_MASK
@@ -284,7 +400,10 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev)
 	pmnc |= (PPMU_ENABLE << PPMU_PMNC_COUNTER_RESET_SHIFT);
 	pmnc |= (PPMU_ENABLE << PPMU_PMNC_CC_RESET_SHIFT);
 	pmnc |= (PPMU_V2_MODE_MANUAL << PPMU_V2_PMNC_START_MODE_SHIFT);
-	__raw_writel(pmnc, info->ppmu.base + PPMU_V2_PMNC);
+
+	ret = regmap_write(info->regmap, PPMU_V2_PMNC, pmnc);
+	if (ret < 0)
+		return ret;
 
 	return 0;
 }
@@ -294,37 +413,61 @@ static int exynos_ppmu_v2_get_event(struct devfreq_event_dev *edev,
 {
 	struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
 	int id = exynos_ppmu_find_ppmu_id(edev);
-	u32 pmnc, cntenc;
-	u32 pmcnt_high, pmcnt_low;
-	u64 load_count = 0;
+	int ret;
+	unsigned int pmnc, cntenc;
+	unsigned int pmcnt_high, pmcnt_low;
+	unsigned int total_count, count;
+	unsigned long load_count = 0;
 
 	/* Disable PPMU */
-	pmnc = __raw_readl(info->ppmu.base + PPMU_V2_PMNC);
+	ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
+	if (ret < 0)
+		return ret;
+
 	pmnc &= ~PPMU_PMNC_ENABLE_MASK;
-	__raw_writel(pmnc, info->ppmu.base + PPMU_V2_PMNC);
+	ret = regmap_write(info->regmap, PPMU_V2_PMNC, pmnc);
+	if (ret < 0)
+		return ret;
 
 	/* Read cycle count and performance count */
-	edata->total_count = __raw_readl(info->ppmu.base + PPMU_V2_CCNT);
+	ret = regmap_read(info->regmap, PPMU_V2_CCNT, &total_count);
+	if (ret < 0)
+		return ret;
+	edata->total_count = total_count;
 
 	switch (id) {
 	case PPMU_PMNCNT0:
 	case PPMU_PMNCNT1:
 	case PPMU_PMNCNT2:
-		load_count = __raw_readl(info->ppmu.base + PPMU_V2_PMNCT(id));
+		ret = regmap_read(info->regmap, PPMU_V2_PMNCT(id), &count);
+		if (ret < 0)
+			return ret;
+		load_count = count;
 		break;
 	case PPMU_PMNCNT3:
-		pmcnt_high = __raw_readl(info->ppmu.base + PPMU_V2_PMCNT3_HIGH);
-		pmcnt_low = __raw_readl(info->ppmu.base + PPMU_V2_PMCNT3_LOW);
-		load_count = ((u64)((pmcnt_high & 0xff)) << 32)
-			   + (u64)pmcnt_low;
+		ret = regmap_read(info->regmap, PPMU_V2_PMCNT3_HIGH,
+						&pmcnt_high);
+		if (ret < 0)
+			return ret;
+
+		ret = regmap_read(info->regmap, PPMU_V2_PMCNT3_LOW, &pmcnt_low);
+		if (ret < 0)
+			return ret;
+
+		load_count = ((u64)((pmcnt_high & 0xff)) << 32)+ (u64)pmcnt_low;
 		break;
 	}
 	edata->load_count = load_count;
 
 	/* Disable all counters */
-	cntenc = __raw_readl(info->ppmu.base + PPMU_V2_CNTENC);
+	ret = regmap_read(info->regmap, PPMU_V2_CNTENC, &cntenc);
+	if (ret < 0)
+		return 0;
+
 	cntenc |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
-	__raw_writel(cntenc, info->ppmu.base + PPMU_V2_CNTENC);
+	ret = regmap_write(info->regmap, PPMU_V2_CNTENC, cntenc);
+	if (ret < 0)
+		return ret;
 
 	dev_dbg(&edev->dev, "%25s (load: %ld / %ld)\n", edev->desc->name,
 					edata->load_count, edata->total_count);
@@ -411,10 +554,19 @@ static int of_get_devfreq_events(struct device_node *np,
 	return 0;
 }
 
-static int exynos_ppmu_parse_dt(struct exynos_ppmu *info)
+static struct regmap_config exynos_ppmu_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+static int exynos_ppmu_parse_dt(struct platform_device *pdev,
+				struct exynos_ppmu *info)
 {
 	struct device *dev = info->dev;
 	struct device_node *np = dev->of_node;
+	struct resource *res;
+	void __iomem *base;
 	int ret = 0;
 
 	if (!np) {
@@ -423,10 +575,17 @@ static int exynos_ppmu_parse_dt(struct exynos_ppmu *info)
 	}
 
 	/* Maps the memory mapped IO to control PPMU register */
-	info->ppmu.base = of_iomap(np, 0);
-	if (IS_ERR_OR_NULL(info->ppmu.base)) {
-		dev_err(dev, "failed to map memory region\n");
-		return -ENOMEM;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	exynos_ppmu_regmap_config.max_register = resource_size(res) - 4;
+	info->regmap = devm_regmap_init_mmio(dev, base,
+					&exynos_ppmu_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		dev_err(dev, "failed to initialize regmap\n");
+		return PTR_ERR(info->regmap);
 	}
 
 	info->ppmu.clk = devm_clk_get(dev, "ppmu");
@@ -438,15 +597,10 @@ static int exynos_ppmu_parse_dt(struct exynos_ppmu *info)
 	ret = of_get_devfreq_events(np, info);
 	if (ret < 0) {
 		dev_err(dev, "failed to parse exynos ppmu dt node\n");
-		goto err;
+		return ret;
 	}
 
 	return 0;
-
-err:
-	iounmap(info->ppmu.base);
-
-	return ret;
 }
 
 static int exynos_ppmu_probe(struct platform_device *pdev)
@@ -463,7 +617,7 @@ static int exynos_ppmu_probe(struct platform_device *pdev)
 	info->dev = &pdev->dev;
 
 	/* Parse dt data to get resource */
-	ret = exynos_ppmu_parse_dt(info);
+	ret = exynos_ppmu_parse_dt(pdev, info);
 	if (ret < 0) {
 		dev_err(&pdev->dev,
 			"failed to parse devicetree for resource\n");
@@ -476,8 +630,7 @@ static int exynos_ppmu_probe(struct platform_device *pdev)
 	if (!info->edev) {
 		dev_err(&pdev->dev,
 			"failed to allocate memory devfreq-event devices\n");
-		ret = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 	edev = info->edev;
 	platform_set_drvdata(pdev, info);
@@ -488,17 +641,13 @@ static int exynos_ppmu_probe(struct platform_device *pdev)
 			ret = PTR_ERR(edev[i]);
 			dev_err(&pdev->dev,
 				"failed to add devfreq-event device\n");
-			goto err;
+			return PTR_ERR(edev[i]);
 		}
 	}
 
 	clk_prepare_enable(info->ppmu.clk);
 
 	return 0;
-err:
-	iounmap(info->ppmu.base);
-
-	return ret;
 }
 
 static int exynos_ppmu_remove(struct platform_device *pdev)
@@ -506,7 +655,6 @@ static int exynos_ppmu_remove(struct platform_device *pdev)
 	struct exynos_ppmu *info = platform_get_drvdata(pdev);
 
 	clk_disable_unprepare(info->ppmu.clk);
-	iounmap(info->ppmu.base);
 
 	return 0;
 }
-- 
1.9.1

Re: [PATCH v2 2/8] PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers

[MyungJoo Ham]

On Wed, Dec 28, 2016 at 8:56 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch uses the regmap interface to read and write the registers for exynos
> PPMU device instead of the legacy memory map functions.
>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Javier Martinez Canillas <javier@osg.samsung.com>
> Cc: linux-samsung-soc@vger.kernel.org
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>


> ---
>  drivers/devfreq/event/exynos-ppmu.c | 326 ++++++++++++++++++++++++++----------
>  1 file changed, 237 insertions(+), 89 deletions(-)
>

[PATCH v2 3/8] PM / devfreq: exynos-bus: Print the real clock rate of bus

[Chanwoo Choi]

This patch shows the real clock rate after calling clk_set_rate()
to debug it.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/exynos-bus.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 9af86f46fbec..e0d1f4ac1740 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -147,8 +147,8 @@ static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
 	}
 	bus->curr_freq = new_freq;
 
-	dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
-			old_freq/1000, new_freq/1000);
+	dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
+			old_freq, new_freq, clk_get_rate(bus->clk));
 out:
 	mutex_unlock(&bus->lock);
 
@@ -241,8 +241,8 @@ static int exynos_bus_passive_target(struct device *dev, unsigned long *freq,
 	*freq = new_freq;
 	bus->curr_freq = new_freq;
 
-	dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
-			old_freq/1000, new_freq/1000);
+	dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
+			old_freq, new_freq, clk_get_rate(bus->clk));
 out:
 	mutex_unlock(&bus->lock);
 
-- 
1.9.1

Re: [PATCH v2 3/8] PM / devfreq: exynos-bus: Print the real clock rate of bus

[MyungJoo Ham]

On Wed, Dec 28, 2016 at 8:56 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch shows the real clock rate after calling clk_set_rate()
> to debug it.
>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Javier Martinez Canillas <javier@osg.samsung.com>
> Cc: linux-samsung-soc@vger.kernel.org
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Acked-by: MyungJoo Ham <myungjoo.ham@gmail.com>


> ---
>  drivers/devfreq/exynos-bus.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>

[PATCH v2 4/8] PM / devfreq: exynos-ppmu: Show the registred device for ppmu device

[Chanwoo Choi]

This patch just adds the simple log to show the PPMU device's registration
during the kernel booting.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/event/exynos-ppmu.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
index fb3706faf5bd..9b5294d0bff4 100644
--- a/drivers/devfreq/event/exynos-ppmu.c
+++ b/drivers/devfreq/event/exynos-ppmu.c
@@ -591,7 +591,7 @@ static int exynos_ppmu_parse_dt(struct platform_device *pdev,
 	info->ppmu.clk = devm_clk_get(dev, "ppmu");
 	if (IS_ERR(info->ppmu.clk)) {
 		info->ppmu.clk = NULL;
-		dev_warn(dev, "cannot get PPMU clock\n");
+		dev_dbg(dev, "cannot get PPMU clock\n");
 	}
 
 	ret = of_get_devfreq_events(np, info);
@@ -643,6 +643,9 @@ static int exynos_ppmu_probe(struct platform_device *pdev)
 				"failed to add devfreq-event device\n");
 			return PTR_ERR(edev[i]);
 		}
+
+		pr_info("exynos-ppmu: new PPMU device registered %s (%s)\n",
+			dev_name(&pdev->dev), desc[i].name);
 	}
 
 	clk_prepare_enable(info->ppmu.clk);
-- 
1.9.1

Re: [PATCH v2 4/8] PM / devfreq: exynos-ppmu: Show the registred device for ppmu device

[MyungJoo Ham]

On Wed, Dec 28, 2016 at 8:56 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch just adds the simple log to show the PPMU device's registration
> during the kernel booting.
>
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Javier Martinez Canillas <javier@osg.samsung.com>
> Cc: linux-samsung-soc@vger.kernel.org
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  drivers/devfreq/event/exynos-ppmu.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
> index fb3706faf5bd..9b5294d0bff4 100644
> --- a/drivers/devfreq/event/exynos-ppmu.c
> +++ b/drivers/devfreq/event/exynos-ppmu.c
> @@ -591,7 +591,7 @@ static int exynos_ppmu_parse_dt(struct platform_device *pdev,
>         info->ppmu.clk = devm_clk_get(dev, "ppmu");
>         if (IS_ERR(info->ppmu.clk)) {
>                 info->ppmu.clk = NULL;
> -               dev_warn(dev, "cannot get PPMU clock\n");
> +               dev_dbg(dev, "cannot get PPMU clock\n");

Do you really want not to emit warning with a clock not found?

>         }
>
>         ret = of_get_devfreq_events(np, info);
> @@ -643,6 +643,9 @@ static int exynos_ppmu_probe(struct platform_device *pdev)
>                                 "failed to add devfreq-event device\n");
>                         return PTR_ERR(edev[i]);
>                 }
> +
> +               pr_info("exynos-ppmu: new PPMU device registered %s (%s)\n",
> +                       dev_name(&pdev->dev), desc[i].name);
>         }
>
>         clk_prepare_enable(info->ppmu.clk);
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
MyungJoo Ham, Ph.D.
S/W Center, Samsung Electronics

Re: [PATCH v2 4/8] PM / devfreq: exynos-ppmu: Show the registred device for ppmu device

[Chanwoo Choi]

2016-12-30 19:35 GMT+09:00 MyungJoo Ham <myungjoo.ham@samsung.com>:
> On Wed, Dec 28, 2016 at 8:56 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
>> This patch just adds the simple log to show the PPMU device's registration
>> during the kernel booting.
>>
>> Cc: Kukjin Kim <kgene@kernel.org>
>> Cc: Krzysztof Kozlowski <krzk@kernel.org>
>> Cc: Javier Martinez Canillas <javier@osg.samsung.com>
>> Cc: linux-samsung-soc@vger.kernel.org
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> ---
>>  drivers/devfreq/event/exynos-ppmu.c | 5 ++++-
>>  1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
>> index fb3706faf5bd..9b5294d0bff4 100644
>> --- a/drivers/devfreq/event/exynos-ppmu.c
>> +++ b/drivers/devfreq/event/exynos-ppmu.c
>> @@ -591,7 +591,7 @@ static int exynos_ppmu_parse_dt(struct platform_device *pdev,
>>         info->ppmu.clk = devm_clk_get(dev, "ppmu");
>>         if (IS_ERR(info->ppmu.clk)) {
>>                 info->ppmu.clk = NULL;
>> -               dev_warn(dev, "cannot get PPMU clock\n");
>> +               dev_dbg(dev, "cannot get PPMU clock\n");
>
> Do you really want not to emit warning with a clock not found?

The clock is now optional on the exynos-bus.c driver. But we better to
keep the warning message. Instead, I'll try to add the clock to PPMU
which is missing the clock.

I'll send the next version.

[snip]

-- 
Best Regards,
Chanwoo Choi

[PATCH v2 5/8] PM / devfreq: Fix the checkpatch warnings

[Chanwoo Choi]

This patch just fixes the checkpatch warnings.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/devfreq.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 47206a21bb90..8e5938c9c7d6 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -538,15 +538,14 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	devfreq = find_device_devfreq(dev);
 	mutex_unlock(&devfreq_list_lock);
 	if (!IS_ERR(devfreq)) {
-		dev_err(dev, "%s: Unable to create devfreq for the device. It already has one.\n", __func__);
+		dev_err(dev, "%s: Unable to create devfreq for the device.\n",
+			__func__);
 		err = -EINVAL;
 		goto err_out;
 	}
 
 	devfreq = kzalloc(sizeof(struct devfreq), GFP_KERNEL);
 	if (!devfreq) {
-		dev_err(dev, "%s: Unable to create devfreq for the device\n",
-			__func__);
 		err = -ENOMEM;
 		goto err_out;
 	}
@@ -576,11 +575,13 @@ struct devfreq *devfreq_add_device(struct device *dev,
 		goto err_out;
 	}
 
-	devfreq->trans_table =	devm_kzalloc(&devfreq->dev, sizeof(unsigned int) *
+	devfreq->trans_table =	devm_kzalloc(&devfreq->dev,
+						sizeof(unsigned int) *
 						devfreq->profile->max_state *
 						devfreq->profile->max_state,
 						GFP_KERNEL);
-	devfreq->time_in_state = devm_kzalloc(&devfreq->dev, sizeof(unsigned long) *
+	devfreq->time_in_state = devm_kzalloc(&devfreq->dev,
+						sizeof(unsigned long) *
 						devfreq->profile->max_state,
 						GFP_KERNEL);
 	devfreq->last_stat_updated = jiffies;
@@ -995,7 +996,7 @@ static ssize_t cur_freq_show(struct device *dev, struct device_attribute *attr,
 
 	if (devfreq->profile->get_cur_freq &&
 		!devfreq->profile->get_cur_freq(devfreq->dev.parent, &freq))
-			return sprintf(buf, "%lu\n", freq);
+		return sprintf(buf, "%lu\n", freq);
 
 	return sprintf(buf, "%lu\n", devfreq->previous_freq);
 }
-- 
1.9.1

Re: [PATCH v2 5/8] PM / devfreq: Fix the checkpatch warnings

[MyungJoo Ham]

On Wed, Dec 28, 2016 at 8:56 PM, Chanwoo Choi <cw00.choi@samsung.com> wrote:
> This patch just fixes the checkpatch warnings.
>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  drivers/devfreq/devfreq.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
> index 47206a21bb90..8e5938c9c7d6 100644
> --- a/drivers/devfreq/devfreq.c
> +++ b/drivers/devfreq/devfreq.c
> @@ -538,15 +538,14 @@ struct devfreq *devfreq_add_device(struct device *dev,
>         devfreq = find_device_devfreq(dev);
>         mutex_unlock(&devfreq_list_lock);
>         if (!IS_ERR(devfreq)) {
> -               dev_err(dev, "%s: Unable to create devfreq for the device. It already has one.\n", __func__);
> +               dev_err(dev, "%s: Unable to create devfreq for the device.\n",
> +                       __func__);

Actually, you do not need to try to keep it under 80col for printing strings.

Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>

>                 err = -EINVAL;
>                 goto err_out;
>         }
>
>         devfreq = kzalloc(sizeof(struct devfreq), GFP_KERNEL);
>         if (!devfreq) {
> -               dev_err(dev, "%s: Unable to create devfreq for the device\n",
> -                       __func__);
>                 err = -ENOMEM;
>                 goto err_out;
>         }


-- 
MyungJoo Ham, Ph.D.
S/W Center, Samsung Electronics

[PATCH v2 6/8] PM / devfreq: Modify the device name as devfreq[X] for sysfs

[Chanwoo Choi]

This patch modifies the device name as devfreq[X] for sysfs by using the 'devfreq'
prefix word instead of separate device name. On user-space aspect, user would
find the some devfreq drvier with 'devfreq[X]' pattern. So, this patch modify the
device name as following:
- /sys/class/devfreq/[non-standard device name] -> /sys/class/devfreq/devfreq[X]

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/devfreq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 8e5938c9c7d6..4bd7a8f71b07 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -527,6 +527,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 {
 	struct devfreq *devfreq;
 	struct devfreq_governor *governor;
+	static atomic_t devfreq_no = ATOMIC_INIT(-1);
 	int err = 0;
 
 	if (!dev || !profile || !governor_name) {
@@ -568,7 +569,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
 		mutex_lock(&devfreq->lock);
 	}
 
-	dev_set_name(&devfreq->dev, "%s", dev_name(dev));
+	dev_set_name(&devfreq->dev, "devfreq%lu",
+			(unsigned long)atomic_inc_return(&devfreq_no));
 	err = device_register(&devfreq->dev);
 	if (err) {
 		mutex_unlock(&devfreq->lock);
-- 
1.9.1

[PATCH v2 7/8] PM / devfreq: Simplify the sysfs name of devfreq-event device

[Chanwoo Choi]

This patch just removes '.' character from the sysfs name of devfreq-event
device as following. Usually, the subsystem uses the similiar naming style
such as {framework name}{Number}.
- old : /sys/class/devfreq-event/event.X
- new : /sys/class/devfreq-event/eventX

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/devfreq-event.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/devfreq/devfreq-event.c b/drivers/devfreq/devfreq-event.c
index 9aea2c7ecbe6..39f8704ad664 100644
--- a/drivers/devfreq/devfreq-event.c
+++ b/drivers/devfreq/devfreq-event.c
@@ -329,7 +329,7 @@ struct devfreq_event_dev *devfreq_event_add_edev(struct device *dev,
 	edev->dev.class = devfreq_event_class;
 	edev->dev.release = devfreq_event_release_edev;
 
-	dev_set_name(&edev->dev, "event.%d", atomic_inc_return(&event_no) - 1);
+	dev_set_name(&edev->dev, "event%d", atomic_inc_return(&event_no) - 1);
 	ret = device_register(&edev->dev);
 	if (ret < 0) {
 		put_device(&edev->dev);
-- 
1.9.1

[PATCH v2 8/8] PM / devfreq: Fix the wrong description for userspace governor

[Chanwoo Choi]

This patch fixes the wrong description of governor_userspace.c
and removes the unneeded blank line.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 drivers/devfreq/governor_userspace.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c
index 35de6e83c1fe..c794352c6163 100644
--- a/drivers/devfreq/governor_userspace.c
+++ b/drivers/devfreq/governor_userspace.c
@@ -1,5 +1,5 @@
 /*
- *  linux/drivers/devfreq/governor_simpleondemand.c
+ *  linux/drivers/devfreq/governor_userspace.c
  *
  *  Copyright (C) 2011 Samsung Electronics
  *	MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -50,7 +50,6 @@ static ssize_t store_freq(struct device *dev, struct device_attribute *attr,
 	unsigned long wanted;
 	int err = 0;
 
-
 	mutex_lock(&devfreq->lock);
 	data = devfreq->data;
 
-- 
1.9.1

[PATCH v2 1/8] PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433

[Chanwoo Choi]

This patch adds the detailed corrleation between sub-blocks and VDD_INT power
line for Exynos5433. VDD_INT provided the power source to INT (Internal) block.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
---
 Documentation/devicetree/bindings/devfreq/exynos-bus.txt | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index d3ec8e676b6b..d085ef90d27c 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -123,6 +123,20 @@ Detailed correlation between sub-blocks and power line according to Exynos SoC:
 		|--- FSYS
 		|--- FSYS2
 
+- In case of Exynos5433, there is VDD_INT power line as following:
+	VDD_INT |--- G2D (parent device)
+		|--- MSCL
+		|--- GSCL
+		|--- JPEG
+		|--- MFC
+		|--- HEVC
+		|--- BUS0
+		|--- BUS1
+		|--- BUS2
+		|--- PERIS (Fixed clock rate)
+		|--- PERIC (Fixed clock rate)
+		|--- FSYS  (Fixed clock rate)
+
 Example1:
 	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
 	power line (regulator). The MIF (Memory Interface) AXI bus is used to
-- 
1.9.1

RE: [PATCH v2 1/8] PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433

[MyungJoo Ham]

[-- Attachment #1: Type: text/plain, Size: 644 bytes --]

>This patch adds the detailed corrleation between sub-blocks and VDD_INT power
>line for Exynos5433. VDD_INT provided the power source to INT (Internal) block.
>
>Cc: Rob Herring <robh+dt@kernel.org>
>Cc: Kukjin Kim <kgene@kernel.org>
>Cc: Krzysztof Kozlowski <krzk@kernel.org>
>Cc: Javier Martinez Canillas <javier@osg.samsung.com>
>Cc: linux-samsung-soc@vger.kernel.org
>Cc: devicetree@vger.kernel.org
>Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>---
> Documentation/devicetree/bindings/devfreq/exynos-bus.txt | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)

Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>

Re: [PATCH v2 0/8] PM / devfreq: Update the devfreq and devfreq-event device

[Chanwoo Choi]

Dear Myungjoo,

Thanks for your review for patch1/2/3/4/5.

But, patch6/7/8 are not yet reviewed. The patch4 should be resent
according to your comment.
So, Could you please review these patch6/7/8?

2016-12-28 20:56 GMT+09:00 Chanwoo Choi <cw00.choi@samsung.com>:
> This patches update the devfreq and devfreq-event device. I add the summary
> of each patch as following.
>
> - Patch1 is documented for bus frequency scaling of Exynos5433's VDD_INT.
>   The related-to patches[1] were merged by Exynos SoC maintainer.
> - Patch2 uses the regmap interface instead of raw_read/write function.
> - Patch3/4 print the useful log for exynos-bus.c and exynos-ppmu.c driver.
> - Patch5 fixes the checkpatch warning of devfreq.c.
> - Patch6/7 modify the name of sysfs entry for devfreq/devfreq-event device
> - Patch8 fixes the wrong description of govenro_userspace.c.
>
> Changes from v1:
> - Rebase these patches on v4.10-rc1.
> - Include the separate patch[2] in these patches.
>
> [1] https://lkml.org/lkml/2016/12/7/846
> - [PATCH v2 0/5] arm64: dts: Enable bus frequency scaling on Exynos5433-based TM2 board
> [2] https://lkml.org/lkml/2016/12/16/7
> - [PATCH] PM / devfreq: Fix the wrong description for userspace governor
>
>
> Depends on:
> - These patches depend on both v4.10-rc1 and patches[3].
>
> [3] https://lkml.org/lkml/2016/12/28/91
> - [PATCH v2 0/3] PM / devfreq: Fix the bug and add reviewer for devfreq support
>
> Chanwoo Choi (8):
>   PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
>   PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers
>   PM / devfreq: exynos-bus: Print the real clock rate of bus
>   PM / devfreq: exynos-ppmu: Show the registred device for ppmu device
>   PM / devfreq: Fix the checkpatch warnings
>   PM / devfreq: Modify the device name as devfreq[X] for sysfs
>   PM / devfreq: Simplify the sysfs name of devfreq-event device
>   PM / devfreq: Fix the wrong description for userspace governor
>
>  .../devicetree/bindings/devfreq/exynos-bus.txt     |  14 +
>  drivers/devfreq/devfreq-event.c                    |   2 +-
>  drivers/devfreq/devfreq.c                          |  17 +-
>  drivers/devfreq/event/exynos-ppmu.c                | 331 +++++++++++++++------
>  drivers/devfreq/exynos-bus.c                       |   8 +-
>  drivers/devfreq/governor_userspace.c               |   3 +-
>  6 files changed, 271 insertions(+), 104 deletions(-)
>
> --
> 1.9.1
>



-- 
Best Regards,
Chanwoo Choi