All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: Sricharan R <sricharan@codeaurora.org>
Cc: robin.murphy@arm.com, will.deacon@arm.com, joro@8bytes.org,
	iommu@lists.linux-foundation.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, m.szyprowski@samsung.com,
	bhelgaas@google.com, linux-pci@vger.kernel.org,
	linux-acpi@vger.kernel.org, Tomasz Nowicki <tn@semihalf.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Hanjun Guo <hanjun.guo@linaro.org>
Subject: Re: [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error
Date: Tue, 24 Jan 2017 12:37:12 +0000	[thread overview]
Message-ID: <20170124123711.GA11996@red-moon> (raw)
In-Reply-To: <1485188293-20263-9-git-send-email-sricharan@codeaurora.org>

[+hanjun, tomasz, sinan]

It is quite a key patchset, I would be glad if they can test on their
respective platforms with IORT.

On Mon, Jan 23, 2017 at 09:48:10PM +0530, Sricharan R wrote:
> This is an equivalent to the DT's handling of the iommu master's probe
> with deferred probing when the corrsponding iommu is not probed yet.
> The lack of a registered IOMMU can be caused by the lack of a driver for
> the IOMMU, the IOMMU device probe not having been performed yet, having
> been deferred, or having failed.
> 
> The first case occurs when the firmware describes the bus master and
> IOMMU topology correctly but no device driver exists for the IOMMU yet
> or the device driver has not been compiled in. Return NULL, the caller
> will configure the device without an IOMMU.
> 
> The second and third cases are handled by deferring the probe of the bus
> master device which will eventually get reprobed after the IOMMU.
> 
> The last case is currently handled by deferring the probe of the bus
> master device as well. A mechanism to either configure the bus master
> device without an IOMMU or to fail the bus master device probe depending
> on whether the IOMMU is optional or mandatory would be a good
> enhancement.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  drivers/acpi/arm64/iort.c  | 25 ++++++++++++++++++++++++-
>  drivers/acpi/scan.c        |  7 +++++--
>  drivers/base/dma-mapping.c |  2 +-
>  include/acpi/acpi_bus.h    |  2 +-
>  include/linux/acpi.h       |  7 +++++--
>  5 files changed, 36 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index bf0ed09..d01bae8 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -550,8 +550,17 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
>  			return NULL;
>  
>  		ops = iommu_get_instance(iort_fwnode);
> +		/*
> +		 * If the ops look-up fails, this means that either
> +		 * the SMMU drivers have not been probed yet or that
> +		 * the SMMU drivers are not built in the kernel;
> +		 * Depending on whether the SMMU drivers are built-in
> +		 * in the kernel or not, defer the IOMMU configuration
> +		 * or just abort it.
> +		 */
>  		if (!ops)
> -			return NULL;
> +			return iort_iommu_driver_enabled(node->type) ?
> +			       ERR_PTR(-EPROBE_DEFER) : NULL;
>  
>  		ret = arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
>  	}
> @@ -625,12 +634,26 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
>  
>  		while (parent) {
>  			ops = iort_iommu_xlate(dev, parent, streamid);
> +			if (IS_ERR_OR_NULL(ops))
> +				return ops;
>  
>  			parent = iort_node_get_id(node, &streamid,
>  						  IORT_IOMMU_TYPE, i++);
>  		}
>  	}
>  
> +	/*
> +	 * If we have reason to believe the IOMMU driver missed the initial
> +	 * add_device callback for dev, replay it to get things in order.
> +	 */
> +	if (!IS_ERR_OR_NULL(ops) && ops->add_device &&
> +	    dev->bus && !dev->iommu_group) {
> +		int err = ops->add_device(dev);
> +
> +		if (err)
> +			ops = ERR_PTR(err);
> +	}

I think there is nothing ACPI specific in this add_device() replay
path, so there is room for further DT/ACPI consolidation here.

Without any further ado:

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

> +
>  	return ops;
>  }
>  
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 1926918..823b005 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1373,20 +1373,23 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>   * @dev: The pointer to the device
>   * @attr: device dma attributes
>   */
> -void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
> +int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
>  {
>  	const struct iommu_ops *iommu;
>  
>  	iort_set_dma_mask(dev);
>  
>  	iommu = iort_iommu_configure(dev);
> -
> +	if (IS_ERR(iommu))
> +		return PTR_ERR(iommu);
>  	/*
>  	 * Assume dma valid range starts at 0 and covers the whole
>  	 * coherent_dma_mask.
>  	 */
>  	arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, iommu,
>  			   attr == DEV_DMA_COHERENT);
> +
> +	return 0;
>  }
>  EXPORT_SYMBOL_GPL(acpi_dma_configure);
>  
> diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
> index 82bd45c..755a2b5 100644
> --- a/drivers/base/dma-mapping.c
> +++ b/drivers/base/dma-mapping.c
> @@ -368,7 +368,7 @@ int dma_configure(struct device *dev)
>  	} else if (has_acpi_companion(dma_dev)) {
>  		attr = acpi_get_dma_attr(to_acpi_device_node(dma_dev->fwnode));
>  		if (attr != DEV_DMA_NOT_SUPPORTED)
> -			acpi_dma_configure(dev, attr);
> +			ret = acpi_dma_configure(dev, attr);
>  	}
>  
>  	if (bridge)
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 4242c31..9aa762fe 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -573,7 +573,7 @@ struct acpi_pci_root {
>  
>  bool acpi_dma_supported(struct acpi_device *adev);
>  enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
> -void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
> +int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
>  void acpi_dma_deconfigure(struct device *dev);
>  
>  struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 5b36974..8b958b6 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -764,8 +764,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>  	return DEV_DMA_NOT_SUPPORTED;
>  }
>  
> -static inline void acpi_dma_configure(struct device *dev,
> -				      enum dev_dma_attr attr) { }
> +static inline int acpi_dma_configure(struct device *dev,
> +				     enum dev_dma_attr attr)
> +{
> +	return 0;
> +}
>  
>  static inline void acpi_dma_deconfigure(struct device *dev) { }
>  
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> 

WARNING: multiple messages have this Message-ID (diff)
From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error
Date: Tue, 24 Jan 2017 12:37:12 +0000	[thread overview]
Message-ID: <20170124123711.GA11996@red-moon> (raw)
In-Reply-To: <1485188293-20263-9-git-send-email-sricharan@codeaurora.org>

[+hanjun, tomasz, sinan]

It is quite a key patchset, I would be glad if they can test on their
respective platforms with IORT.

On Mon, Jan 23, 2017 at 09:48:10PM +0530, Sricharan R wrote:
> This is an equivalent to the DT's handling of the iommu master's probe
> with deferred probing when the corrsponding iommu is not probed yet.
> The lack of a registered IOMMU can be caused by the lack of a driver for
> the IOMMU, the IOMMU device probe not having been performed yet, having
> been deferred, or having failed.
> 
> The first case occurs when the firmware describes the bus master and
> IOMMU topology correctly but no device driver exists for the IOMMU yet
> or the device driver has not been compiled in. Return NULL, the caller
> will configure the device without an IOMMU.
> 
> The second and third cases are handled by deferring the probe of the bus
> master device which will eventually get reprobed after the IOMMU.
> 
> The last case is currently handled by deferring the probe of the bus
> master device as well. A mechanism to either configure the bus master
> device without an IOMMU or to fail the bus master device probe depending
> on whether the IOMMU is optional or mandatory would be a good
> enhancement.
> 
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> ---
>  drivers/acpi/arm64/iort.c  | 25 ++++++++++++++++++++++++-
>  drivers/acpi/scan.c        |  7 +++++--
>  drivers/base/dma-mapping.c |  2 +-
>  include/acpi/acpi_bus.h    |  2 +-
>  include/linux/acpi.h       |  7 +++++--
>  5 files changed, 36 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> index bf0ed09..d01bae8 100644
> --- a/drivers/acpi/arm64/iort.c
> +++ b/drivers/acpi/arm64/iort.c
> @@ -550,8 +550,17 @@ static const struct iommu_ops *iort_iommu_xlate(struct device *dev,
>  			return NULL;
>  
>  		ops = iommu_get_instance(iort_fwnode);
> +		/*
> +		 * If the ops look-up fails, this means that either
> +		 * the SMMU drivers have not been probed yet or that
> +		 * the SMMU drivers are not built in the kernel;
> +		 * Depending on whether the SMMU drivers are built-in
> +		 * in the kernel or not, defer the IOMMU configuration
> +		 * or just abort it.
> +		 */
>  		if (!ops)
> -			return NULL;
> +			return iort_iommu_driver_enabled(node->type) ?
> +			       ERR_PTR(-EPROBE_DEFER) : NULL;
>  
>  		ret = arm_smmu_iort_xlate(dev, streamid, iort_fwnode, ops);
>  	}
> @@ -625,12 +634,26 @@ const struct iommu_ops *iort_iommu_configure(struct device *dev)
>  
>  		while (parent) {
>  			ops = iort_iommu_xlate(dev, parent, streamid);
> +			if (IS_ERR_OR_NULL(ops))
> +				return ops;
>  
>  			parent = iort_node_get_id(node, &streamid,
>  						  IORT_IOMMU_TYPE, i++);
>  		}
>  	}
>  
> +	/*
> +	 * If we have reason to believe the IOMMU driver missed the initial
> +	 * add_device callback for dev, replay it to get things in order.
> +	 */
> +	if (!IS_ERR_OR_NULL(ops) && ops->add_device &&
> +	    dev->bus && !dev->iommu_group) {
> +		int err = ops->add_device(dev);
> +
> +		if (err)
> +			ops = ERR_PTR(err);
> +	}

I think there is nothing ACPI specific in this add_device() replay
path, so there is room for further DT/ACPI consolidation here.

Without any further ado:

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

> +
>  	return ops;
>  }
>  
> diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
> index 1926918..823b005 100644
> --- a/drivers/acpi/scan.c
> +++ b/drivers/acpi/scan.c
> @@ -1373,20 +1373,23 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>   * @dev: The pointer to the device
>   * @attr: device dma attributes
>   */
> -void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
> +int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr)
>  {
>  	const struct iommu_ops *iommu;
>  
>  	iort_set_dma_mask(dev);
>  
>  	iommu = iort_iommu_configure(dev);
> -
> +	if (IS_ERR(iommu))
> +		return PTR_ERR(iommu);
>  	/*
>  	 * Assume dma valid range starts at 0 and covers the whole
>  	 * coherent_dma_mask.
>  	 */
>  	arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, iommu,
>  			   attr == DEV_DMA_COHERENT);
> +
> +	return 0;
>  }
>  EXPORT_SYMBOL_GPL(acpi_dma_configure);
>  
> diff --git a/drivers/base/dma-mapping.c b/drivers/base/dma-mapping.c
> index 82bd45c..755a2b5 100644
> --- a/drivers/base/dma-mapping.c
> +++ b/drivers/base/dma-mapping.c
> @@ -368,7 +368,7 @@ int dma_configure(struct device *dev)
>  	} else if (has_acpi_companion(dma_dev)) {
>  		attr = acpi_get_dma_attr(to_acpi_device_node(dma_dev->fwnode));
>  		if (attr != DEV_DMA_NOT_SUPPORTED)
> -			acpi_dma_configure(dev, attr);
> +			ret = acpi_dma_configure(dev, attr);
>  	}
>  
>  	if (bridge)
> diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
> index 4242c31..9aa762fe 100644
> --- a/include/acpi/acpi_bus.h
> +++ b/include/acpi/acpi_bus.h
> @@ -573,7 +573,7 @@ struct acpi_pci_root {
>  
>  bool acpi_dma_supported(struct acpi_device *adev);
>  enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev);
> -void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
> +int acpi_dma_configure(struct device *dev, enum dev_dma_attr attr);
>  void acpi_dma_deconfigure(struct device *dev);
>  
>  struct acpi_device *acpi_find_child_device(struct acpi_device *parent,
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 5b36974..8b958b6 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -764,8 +764,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev)
>  	return DEV_DMA_NOT_SUPPORTED;
>  }
>  
> -static inline void acpi_dma_configure(struct device *dev,
> -				      enum dev_dma_attr attr) { }
> +static inline int acpi_dma_configure(struct device *dev,
> +				     enum dev_dma_attr attr)
> +{
> +	return 0;
> +}
>  
>  static inline void acpi_dma_deconfigure(struct device *dev) { }
>  
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
> 

  reply	other threads:[~2017-01-24 12:35 UTC|newest]

Thread overview: 147+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170123161926epcas2p1cf464a2978d89d0c1fdd2f7cc6d38317@epcas2p1.samsung.com>
2017-01-23 16:18 ` [PATCH V7 00/11] IOMMU probe deferral support Sricharan R
2017-01-23 16:18   ` Sricharan R
2017-01-23 16:18   ` [PATCH V7 01/11] iommu/of: Refactor of_iommu_configure() for error handling Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-23 16:18     ` Sricharan R
     [not found]     ` <1485188293-20263-2-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-25 17:17       ` Tomasz Nowicki
2017-01-25 17:17         ` Tomasz Nowicki
2017-01-25 17:17         ` Tomasz Nowicki
2017-01-25 17:35         ` Robin Murphy
2017-01-25 17:35           ` Robin Murphy
2017-01-25 18:13           ` Tomasz Nowicki
2017-01-25 18:13             ` Tomasz Nowicki
     [not found]           ` <c7bad124-d9f2-0ddf-168f-0b1950d3e1ed-5wv7dgnIgG8@public.gmane.org>
2017-01-27 18:00             ` Sricharan
2017-01-27 18:00               ` Sricharan
2017-01-27 18:00               ` Sricharan
2017-01-27 18:19               ` Robin Murphy
2017-01-27 18:19                 ` Robin Murphy
2017-01-27 18:19                 ` Robin Murphy
2017-01-30  7:00                 ` Sricharan
2017-01-30  7:00                   ` Sricharan
2017-01-30  7:00                   ` Sricharan
2017-01-30 18:42                   ` Robin Murphy
2017-01-30 18:42                     ` Robin Murphy
2017-01-30 18:42                     ` Robin Murphy
     [not found]                     ` <8387d057-15bd-500c-134e-0e731ff837d6-5wv7dgnIgG8@public.gmane.org>
2017-01-31 13:11                       ` Sricharan
2017-01-31 13:11                         ` Sricharan
2017-01-31 13:11                         ` Sricharan
2017-01-23 16:18   ` [PATCH V7 02/11] iommu/of: Prepare for deferred IOMMU configuration Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-23 16:18   ` [PATCH V7 03/11] of: dma: Move range size workaround to of_dma_get_range() Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-23 16:18   ` [PATCH V7 05/11] ACPI/IORT: Add function to check SMMUs drivers presence Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-23 16:18   ` [PATCH V7 06/11] of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-28 21:08     ` Bjorn Helgaas
2017-01-28 21:08       ` Bjorn Helgaas
2017-01-30  7:09     ` Rafael J. Wysocki
2017-01-30  7:09       ` Rafael J. Wysocki
2017-01-23 16:18   ` [PATCH V7 07/11] iommu: of: Handle IOMMU lookup failure with deferred probing or error Sricharan R
2017-01-23 16:18     ` Sricharan R
     [not found]     ` <1485188293-20263-8-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-28 21:03       ` Bjorn Helgaas
2017-01-28 21:03         ` Bjorn Helgaas
2017-01-28 21:03         ` Bjorn Helgaas
2017-01-30  8:01         ` Sricharan
2017-01-30  8:01           ` Sricharan
2017-01-30  8:01           ` Sricharan
2017-01-29 16:36     ` Sinan Kaya
2017-01-29 16:36       ` Sinan Kaya
2017-01-29 16:36       ` Sinan Kaya
     [not found]       ` <34a703f0-3b37-88f0-46fa-b56ab6717a42-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-30 12:00         ` Sricharan
2017-01-30 12:00           ` Sricharan
2017-01-30 12:00           ` Sricharan
2017-01-23 16:18   ` [PATCH V7 08/11] drivers: acpi: " Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-24 12:37     ` Lorenzo Pieralisi [this message]
2017-01-24 12:37       ` Lorenzo Pieralisi
2017-01-24 13:14       ` Hanjun Guo
2017-01-24 13:14         ` Hanjun Guo
2017-01-24 13:14         ` Hanjun Guo
2017-01-25  7:31       ` Sricharan
2017-01-25  7:31         ` Sricharan
2017-01-25  7:31         ` Sricharan
2017-01-29 17:53       ` Sinan Kaya
2017-01-29 17:53         ` Sinan Kaya
2017-01-29 17:53         ` Sinan Kaya
     [not found]         ` <f2370671-ece8-fbee-de19-350dd625088f-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-30 12:22           ` Robin Murphy
2017-01-30 12:22             ` Robin Murphy
2017-01-30 12:22             ` Robin Murphy
     [not found]             ` <93e79759-d614-9b36-d5ab-63e8eb725009-5wv7dgnIgG8@public.gmane.org>
2017-01-30 13:59               ` Sinan Kaya
2017-01-30 13:59                 ` Sinan Kaya
2017-01-30 13:59                 ` Sinan Kaya
     [not found]                 ` <14751205-f034-7f0d-442a-854c3909425c-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-30 14:23                   ` Nate Watterson
2017-01-30 14:23                     ` Nate Watterson
2017-01-30 14:23                     ` Nate Watterson
     [not found]                     ` <5ba9f366d6e25397cdef8ad95b49e199-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-30 14:33                       ` Sinan Kaya
2017-01-30 14:33                         ` Sinan Kaya
2017-01-30 14:33                         ` Sinan Kaya
2017-01-30 14:38                         ` Will Deacon
2017-01-30 14:38                           ` Will Deacon
2017-01-30 14:38                           ` Will Deacon
     [not found]                           ` <20170130143851.GJ16461-5wv7dgnIgG8@public.gmane.org>
2017-01-30 14:54                             ` Nate Watterson
2017-01-30 14:54                               ` Nate Watterson
2017-01-30 14:54                               ` Nate Watterson
     [not found]                               ` <b2e50c17de156341deab9fb8e91a8dec-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-30 15:46                                 ` Sinan Kaya
2017-01-30 15:46                                   ` Sinan Kaya
2017-01-30 15:46                                   ` Sinan Kaya
     [not found]                                   ` <1e048aff-0d77-b9f2-ebf8-2ba315b90ca7-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-30 16:51                                     ` Lorenzo Pieralisi
2017-01-30 16:51                                       ` Lorenzo Pieralisi
2017-01-30 16:51                                       ` Lorenzo Pieralisi
2017-01-30 20:03                                       ` Sinan Kaya
2017-01-30 20:03                                         ` Sinan Kaya
2017-02-01 18:52                                         ` Lorenzo Pieralisi
2017-02-01 18:52                                           ` Lorenzo Pieralisi
2017-02-01 18:52                                           ` Lorenzo Pieralisi
2017-02-01 19:10                                           ` Sinan Kaya
2017-02-01 19:10                                             ` Sinan Kaya
2017-02-01 19:10                                             ` Sinan Kaya
2017-02-02 19:01                                           ` Nate Watterson
2017-02-02 19:01                                             ` Nate Watterson
     [not found]                                             ` <3f4aa4c1e660c7e62256de9ca64fc822-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-02-03  3:37                                               ` Hanjun Guo
2017-02-03  3:37                                                 ` Hanjun Guo
2017-02-03  3:37                                                 ` Hanjun Guo
2017-02-03  3:37                                             ` Sricharan
2017-02-03  3:37                                               ` Sricharan
2017-02-03  3:37                                               ` Sricharan
2017-01-23 16:18   ` [PATCH V7 09/11] arm64: dma-mapping: Remove the notifier trick to handle early setting of dma_ops Sricharan R
2017-01-23 16:18     ` Sricharan R
     [not found]     ` <1485188293-20263-10-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-28 21:06       ` Bjorn Helgaas
2017-01-28 21:06         ` Bjorn Helgaas
2017-01-28 21:06         ` Bjorn Helgaas
     [not found]         ` <20170128210611.GF20550-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2017-01-30  8:04           ` Sricharan
2017-01-30  8:04             ` Sricharan
2017-01-30  8:04             ` Sricharan
2017-01-23 16:18   ` [PATCH V7 10/11] iommu/arm-smmu: Clean up early-probing workarounds Sricharan R
2017-01-23 16:18     ` Sricharan R
2017-01-25 17:28     ` Tomasz Nowicki
2017-01-25 17:28       ` Tomasz Nowicki
     [not found]     ` <1485188293-20263-11-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-28 21:07       ` Bjorn Helgaas
2017-01-28 21:07         ` Bjorn Helgaas
2017-01-28 21:07         ` Bjorn Helgaas
     [not found]         ` <20170128210709.GG20550-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2017-01-30  8:05           ` Sricharan
2017-01-30  8:05             ` Sricharan
2017-01-30  8:05             ` Sricharan
2017-01-23 16:18   ` [PATCH V7 11/11] ACPI/IORT: Remove linker section for IORT entries probing Sricharan R
2017-01-23 16:18     ` Sricharan R
     [not found]   ` <1485188293-20263-1-git-send-email-sricharan-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-01-23 16:18     ` [PATCH V7 04/11] of: dma: Make of_dma_deconfigure() public Sricharan R
2017-01-23 16:18       ` Sricharan R
2017-01-23 16:18       ` Sricharan R
2017-01-24  7:40     ` [PATCH V7 00/11] IOMMU probe deferral support Marek Szyprowski
2017-01-24  7:40       ` Marek Szyprowski
2017-01-24  7:40       ` Marek Szyprowski
2017-01-24 11:15       ` Sricharan
2017-01-24 11:15         ` Sricharan
2017-01-24 11:15         ` Sricharan
2017-01-25  4:33     ` Hanjun Guo
2017-01-25  4:33       ` Hanjun Guo
2017-01-25  4:33       ` Hanjun Guo
2017-01-25  7:33       ` Sricharan
2017-01-25  7:33         ` Sricharan
2017-01-25  7:33         ` Sricharan
2017-01-28 21:10     ` Bjorn Helgaas
2017-01-28 21:10       ` Bjorn Helgaas
2017-01-28 21:10       ` Bjorn Helgaas
     [not found]       ` <20170128211029.GI20550-1RhO1Y9PlrlHTL0Zs8A6p5iNqAH0jzoTYJqu5kTmcBRl57MIdRCFDg@public.gmane.org>
2017-01-30  9:20         ` Sricharan
2017-01-30  9:20           ` Sricharan
2017-01-30  9:20           ` Sricharan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170124123711.GA11996@red-moon \
    --to=lorenzo.pieralisi@arm.com \
    --cc=bhelgaas@google.com \
    --cc=hanjun.guo@linaro.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=okaya@codeaurora.org \
    --cc=robin.murphy@arm.com \
    --cc=sricharan@codeaurora.org \
    --cc=tn@semihalf.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.