From: Bjorn Helgaas <helgaas@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
Joao Pinto <Joao.Pinto@synopsys.com>,
linux-pci@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
hch@infradead.org, nsekhar@ti.com
Subject: Re: [GIT PULL] PCI: Support for configurable PCI endpoint
Date: Mon, 10 Apr 2017 10:43:28 -0500 [thread overview]
Message-ID: <20170410154328.GB13170@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20170405085243.18123-1-kishon@ti.com>
On Wed, Apr 05, 2017 at 02:22:20PM +0530, Kishon Vijay Abraham I wrote:
> Hi Bjorn,
>
> Please find the pull request for PCI endpoint support below. I've
> also included all the history here.
Thanks, I applied these (with v7 of the first patch) to pci/host-designware
for v4.12.
> Changes from v5:
> *) remove #syscon-cells property added in v5 and used
> of_parse_phandle_with_fixed_args
> *) fix compilation error in make.cross ARCH=blackfin that was because
> pci_endpoint_test.c driver depends on COMPILE_TEST.
>
> Changes from v4:
> *) add #syscon-cells property and used of_parse_phandle_with_args
> to perform a configuration in syscon module (as suggested by
> Rob Herring)
> *) Remove unnecessary white space.
>
> Changes from v3:
> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562.
>
> Changes from v2:
> *) changed the configfs structure as suggested by Christoph Hellwig. With
> this change the framework creates configfs entry for EP function driver
> and EP controller. Previously these entries have to be created by the
> the user. (Haven't changed the epc core or epf core except for invoking
> configfs APIs to create entries for EP function driver and EP controller.
> That's mostly because the EP function device can still be created by
> directly invoking the epf core API without using configfs).
> *) Now the user has to use configfs entry 'start' to start the link.
> This was previously done by the function driver. However in the case of
> multi function EP, the function driver shouldn't start the link.
>
> Changes from v1:
> *) The preparation patches for adding EP support is removed and is sent
> separately
> *) Added device ID for DRA74x/DRA72x and used it instead of
> using "PCI_ANY_ID"
> *) Added userguide for PCI endpoint test function
>
> Major Improvements from RFC:
> *) support multi-function devices (hw supported not virtual)
> *) Access host side buffers
> *) Raise MSI interrupts
> *) Add user space program to use the host side PCI driver
> *) Adapt all other users of designware to use the new design (only
> compile tested. Since I have only dra7xx boards, the new design
> has only been tested in dra7xx. I'd require the help of others
> to test the platforms they have access to).
>
> This is based on
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
> pci/host-designware
>
> Thanks
> Kishon
>
> The following changes since commit 7ea64dcf602c21b3e5062ca90111ca4459fab403:
>
> __end__ (2017-04-04 15:29:37 -0500)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12
>
> for you to fetch changes up to a5c85ba45c9682456077d7277196e91f8ea5fd5c:
>
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-04-05 14:05:28 +0530)
>
> ----------------------------------------------------------------
> pci: endpoint: for 4.12
>
> *) Add PCI endpoint core layer
> *) Modify designware and dra7xx driver to be configured in EP mode
> *) Add a PCI endpoint *test* function driver and corresponding host
> driver
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (23):
> PCI: endpoint: Add EP core layer to enable EP controller and EP functions
> Documentation: PCI: Guide to use PCI Endpoint Core Layer
> PCI: endpoint: Introduce configfs entry for configuring EP functions
> Documentation: PCI: Guide to use PCI endpoint configfs
> PCI: endpoint: Create configfs entry for EPC device and EPF driver
> Documentation: PCI: Add specification for the *PCI test* function device
> PCI: endpoint: functions: Add an EP function to test PCI
> Documentation: PCI: Add binding documentation for pci-test endpoint function
> PCI: dwc: designware: Add EP mode support
> dt-bindings: PCI: Add DT bindings for PCI designware EP mode
> PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
> PCI: dwc: dra7xx: Add EP mode support
> dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
> PCI: dwc: dra7xx: Workaround for errata id i870
> dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
> PCI: Add device IDs for DRA74x and DRA72x
> misc: Add host side PCI driver for PCI test function device
> Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
> tools: PCI: Add a userspace tool to test PCI endpoint
> tools: PCI: Add sample test script to invoke pcitest
> Documentation: PCI: Add userguide for PCI endpoint test function
> MAINTAINERS: Add PCI Endpoint maintainer
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
>
> Documentation/PCI/00-INDEX | 10 +++
> Documentation/PCI/endpoint/function/binding/pci-test.txt | 17 +++++
> Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 105 ++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-endpoint.txt | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-test-function.txt | 66 ++++++++++++++++
> Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++++++++++++++++++++
> Documentation/devicetree/bindings/pci/designware-pcie.txt | 26 +++++--
> Documentation/devicetree/bindings/pci/ti-pci.txt | 42 +++++++++--
> Documentation/misc-devices/pci-endpoint-test.txt | 35 +++++++++
> MAINTAINERS | 9 +++
> arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
> drivers/Makefile | 2 +
> drivers/misc/Kconfig | 7 ++
> drivers/misc/Makefile | 1 +
> drivers/misc/pci_endpoint_test.c | 534 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/Kconfig | 1 +
> drivers/pci/dwc/Kconfig | 36 ++++++++-
> drivers/pci/dwc/Makefile | 5 +-
> drivers/pci/dwc/pci-dra7xx.c | 270 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.c | 125 ++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.h | 112 +++++++++++++++++++++++++++
> drivers/pci/endpoint/Kconfig | 31 ++++++++
> drivers/pci/endpoint/Makefile | 7 ++
> drivers/pci/endpoint/functions/Kconfig | 12 +++
> drivers/pci/endpoint/functions/Makefile | 5 ++
> drivers/pci/endpoint/functions/pci-epf-test.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-ep-cfs.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-core.c | 579 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-mem.c | 143 +++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epf-core.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mod_devicetable.h | 10 +++
> include/linux/pci-ep-cfs.h | 41 ++++++++++
> include/linux/pci-epc.h | 144 +++++++++++++++++++++++++++++++++++
> include/linux/pci-epf.h | 162 +++++++++++++++++++++++++++++++++++++++
> include/linux/pci_ids.h | 2 +
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/pcitest.h | 19 +++++
> tools/pci/pcitest.c | 186 +++++++++++++++++++++++++++++++++++++++++++++
> tools/pci/pcitest.sh | 56 ++++++++++++++
> 40 files changed, 4869 insertions(+), 40 deletions(-)
> create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt
> create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
> create mode 100644 drivers/misc/pci_endpoint_test.c
> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
> create mode 100644 drivers/pci/endpoint/Kconfig
> create mode 100644 drivers/pci/endpoint/Makefile
> create mode 100644 drivers/pci/endpoint/functions/Kconfig
> create mode 100644 drivers/pci/endpoint/functions/Makefile
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
> create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
> create mode 100644 drivers/pci/endpoint/pci-epc-core.c
> create mode 100644 drivers/pci/endpoint/pci-epc-mem.c
> create mode 100644 drivers/pci/endpoint/pci-epf-core.c
> create mode 100644 include/linux/pci-ep-cfs.h
> create mode 100644 include/linux/pci-epc.h
> create mode 100644 include/linux/pci-epf.h
> create mode 100644 include/uapi/linux/pcitest.h
> create mode 100644 tools/pci/pcitest.c
> create mode 100644 tools/pci/pcitest.sh
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <helgaas@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: devicetree@vger.kernel.org, Joao Pinto <Joao.Pinto@synopsys.com>,
linux-doc@vger.kernel.org, linux-pci@vger.kernel.org,
nsekhar@ti.com, linux-kernel@vger.kernel.org, hch@infradead.org,
Bjorn Helgaas <bhelgaas@google.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] PCI: Support for configurable PCI endpoint
Date: Mon, 10 Apr 2017 10:43:28 -0500 [thread overview]
Message-ID: <20170410154328.GB13170@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20170405085243.18123-1-kishon@ti.com>
On Wed, Apr 05, 2017 at 02:22:20PM +0530, Kishon Vijay Abraham I wrote:
> Hi Bjorn,
>
> Please find the pull request for PCI endpoint support below. I've
> also included all the history here.
Thanks, I applied these (with v7 of the first patch) to pci/host-designware
for v4.12.
> Changes from v5:
> *) remove #syscon-cells property added in v5 and used
> of_parse_phandle_with_fixed_args
> *) fix compilation error in make.cross ARCH=blackfin that was because
> pci_endpoint_test.c driver depends on COMPILE_TEST.
>
> Changes from v4:
> *) add #syscon-cells property and used of_parse_phandle_with_args
> to perform a configuration in syscon module (as suggested by
> Rob Herring)
> *) Remove unnecessary white space.
>
> Changes from v3:
> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562.
>
> Changes from v2:
> *) changed the configfs structure as suggested by Christoph Hellwig. With
> this change the framework creates configfs entry for EP function driver
> and EP controller. Previously these entries have to be created by the
> the user. (Haven't changed the epc core or epf core except for invoking
> configfs APIs to create entries for EP function driver and EP controller.
> That's mostly because the EP function device can still be created by
> directly invoking the epf core API without using configfs).
> *) Now the user has to use configfs entry 'start' to start the link.
> This was previously done by the function driver. However in the case of
> multi function EP, the function driver shouldn't start the link.
>
> Changes from v1:
> *) The preparation patches for adding EP support is removed and is sent
> separately
> *) Added device ID for DRA74x/DRA72x and used it instead of
> using "PCI_ANY_ID"
> *) Added userguide for PCI endpoint test function
>
> Major Improvements from RFC:
> *) support multi-function devices (hw supported not virtual)
> *) Access host side buffers
> *) Raise MSI interrupts
> *) Add user space program to use the host side PCI driver
> *) Adapt all other users of designware to use the new design (only
> compile tested. Since I have only dra7xx boards, the new design
> has only been tested in dra7xx. I'd require the help of others
> to test the platforms they have access to).
>
> This is based on
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
> pci/host-designware
>
> Thanks
> Kishon
>
> The following changes since commit 7ea64dcf602c21b3e5062ca90111ca4459fab403:
>
> __end__ (2017-04-04 15:29:37 -0500)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12
>
> for you to fetch changes up to a5c85ba45c9682456077d7277196e91f8ea5fd5c:
>
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-04-05 14:05:28 +0530)
>
> ----------------------------------------------------------------
> pci: endpoint: for 4.12
>
> *) Add PCI endpoint core layer
> *) Modify designware and dra7xx driver to be configured in EP mode
> *) Add a PCI endpoint *test* function driver and corresponding host
> driver
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (23):
> PCI: endpoint: Add EP core layer to enable EP controller and EP functions
> Documentation: PCI: Guide to use PCI Endpoint Core Layer
> PCI: endpoint: Introduce configfs entry for configuring EP functions
> Documentation: PCI: Guide to use PCI endpoint configfs
> PCI: endpoint: Create configfs entry for EPC device and EPF driver
> Documentation: PCI: Add specification for the *PCI test* function device
> PCI: endpoint: functions: Add an EP function to test PCI
> Documentation: PCI: Add binding documentation for pci-test endpoint function
> PCI: dwc: designware: Add EP mode support
> dt-bindings: PCI: Add DT bindings for PCI designware EP mode
> PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
> PCI: dwc: dra7xx: Add EP mode support
> dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
> PCI: dwc: dra7xx: Workaround for errata id i870
> dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
> PCI: Add device IDs for DRA74x and DRA72x
> misc: Add host side PCI driver for PCI test function device
> Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
> tools: PCI: Add a userspace tool to test PCI endpoint
> tools: PCI: Add sample test script to invoke pcitest
> Documentation: PCI: Add userguide for PCI endpoint test function
> MAINTAINERS: Add PCI Endpoint maintainer
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
>
> Documentation/PCI/00-INDEX | 10 +++
> Documentation/PCI/endpoint/function/binding/pci-test.txt | 17 +++++
> Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 105 ++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-endpoint.txt | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-test-function.txt | 66 ++++++++++++++++
> Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++++++++++++++++++++
> Documentation/devicetree/bindings/pci/designware-pcie.txt | 26 +++++--
> Documentation/devicetree/bindings/pci/ti-pci.txt | 42 +++++++++--
> Documentation/misc-devices/pci-endpoint-test.txt | 35 +++++++++
> MAINTAINERS | 9 +++
> arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
> drivers/Makefile | 2 +
> drivers/misc/Kconfig | 7 ++
> drivers/misc/Makefile | 1 +
> drivers/misc/pci_endpoint_test.c | 534 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/Kconfig | 1 +
> drivers/pci/dwc/Kconfig | 36 ++++++++-
> drivers/pci/dwc/Makefile | 5 +-
> drivers/pci/dwc/pci-dra7xx.c | 270 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.c | 125 ++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.h | 112 +++++++++++++++++++++++++++
> drivers/pci/endpoint/Kconfig | 31 ++++++++
> drivers/pci/endpoint/Makefile | 7 ++
> drivers/pci/endpoint/functions/Kconfig | 12 +++
> drivers/pci/endpoint/functions/Makefile | 5 ++
> drivers/pci/endpoint/functions/pci-epf-test.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-ep-cfs.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-core.c | 579 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-mem.c | 143 +++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epf-core.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mod_devicetable.h | 10 +++
> include/linux/pci-ep-cfs.h | 41 ++++++++++
> include/linux/pci-epc.h | 144 +++++++++++++++++++++++++++++++++++
> include/linux/pci-epf.h | 162 +++++++++++++++++++++++++++++++++++++++
> include/linux/pci_ids.h | 2 +
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/pcitest.h | 19 +++++
> tools/pci/pcitest.c | 186 +++++++++++++++++++++++++++++++++++++++++++++
> tools/pci/pcitest.sh | 56 ++++++++++++++
> 40 files changed, 4869 insertions(+), 40 deletions(-)
> create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt
> create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
> create mode 100644 drivers/misc/pci_endpoint_test.c
> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
> create mode 100644 drivers/pci/endpoint/Kconfig
> create mode 100644 drivers/pci/endpoint/Makefile
> create mode 100644 drivers/pci/endpoint/functions/Kconfig
> create mode 100644 drivers/pci/endpoint/functions/Makefile
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
> create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
> create mode 100644 drivers/pci/endpoint/pci-epc-core.c
> create mode 100644 drivers/pci/endpoint/pci-epc-mem.c
> create mode 100644 drivers/pci/endpoint/pci-epf-core.c
> create mode 100644 include/linux/pci-ep-cfs.h
> create mode 100644 include/linux/pci-epc.h
> create mode 100644 include/linux/pci-epf.h
> create mode 100644 include/uapi/linux/pcitest.h
> create mode 100644 tools/pci/pcitest.c
> create mode 100644 tools/pci/pcitest.sh
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Helgaas <helgaas@kernel.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: devicetree@vger.kernel.org, Joao Pinto <Joao.Pinto@synopsys.com>,
linux-doc@vger.kernel.org, linux-pci@vger.kernel.org,
nsekhar@ti.com, linux-kernel@vger.kernel.org, hch@infradead.org,
Bjorn Helgaas <bhelgaas@google.com>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [GIT PULL] PCI: Support for configurable PCI endpoint
Date: Mon, 10 Apr 2017 10:43:28 -0500 [thread overview]
Message-ID: <20170410154328.GB13170@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20170405085243.18123-1-kishon@ti.com>
On Wed, Apr 05, 2017 at 02:22:20PM +0530, Kishon Vijay Abraham I wrote:
> Hi Bjorn,
>
> Please find the pull request for PCI endpoint support below. I've
> also included all the history here.
Thanks, I applied these (with v7 of the first patch) to pci/host-designware
for v4.12.
> Changes from v5:
> *) remove #syscon-cells property added in v5 and used
> of_parse_phandle_with_fixed_args
> *) fix compilation error in make.cross ARCH=blackfin that was because
> pci_endpoint_test.c driver depends on COMPILE_TEST.
>
> Changes from v4:
> *) add #syscon-cells property and used of_parse_phandle_with_args
> to perform a configuration in syscon module (as suggested by
> Rob Herring)
> *) Remove unnecessary white space.
>
> Changes from v3:
> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562.
>
> Changes from v2:
> *) changed the configfs structure as suggested by Christoph Hellwig. With
> this change the framework creates configfs entry for EP function driver
> and EP controller. Previously these entries have to be created by the
> the user. (Haven't changed the epc core or epf core except for invoking
> configfs APIs to create entries for EP function driver and EP controller.
> That's mostly because the EP function device can still be created by
> directly invoking the epf core API without using configfs).
> *) Now the user has to use configfs entry 'start' to start the link.
> This was previously done by the function driver. However in the case of
> multi function EP, the function driver shouldn't start the link.
>
> Changes from v1:
> *) The preparation patches for adding EP support is removed and is sent
> separately
> *) Added device ID for DRA74x/DRA72x and used it instead of
> using "PCI_ANY_ID"
> *) Added userguide for PCI endpoint test function
>
> Major Improvements from RFC:
> *) support multi-function devices (hw supported not virtual)
> *) Access host side buffers
> *) Raise MSI interrupts
> *) Add user space program to use the host side PCI driver
> *) Adapt all other users of designware to use the new design (only
> compile tested. Since I have only dra7xx boards, the new design
> has only been tested in dra7xx. I'd require the help of others
> to test the platforms they have access to).
>
> This is based on
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
> pci/host-designware
>
> Thanks
> Kishon
>
> The following changes since commit 7ea64dcf602c21b3e5062ca90111ca4459fab403:
>
> __end__ (2017-04-04 15:29:37 -0500)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12
>
> for you to fetch changes up to a5c85ba45c9682456077d7277196e91f8ea5fd5c:
>
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-04-05 14:05:28 +0530)
>
> ----------------------------------------------------------------
> pci: endpoint: for 4.12
>
> *) Add PCI endpoint core layer
> *) Modify designware and dra7xx driver to be configured in EP mode
> *) Add a PCI endpoint *test* function driver and corresponding host
> driver
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (23):
> PCI: endpoint: Add EP core layer to enable EP controller and EP functions
> Documentation: PCI: Guide to use PCI Endpoint Core Layer
> PCI: endpoint: Introduce configfs entry for configuring EP functions
> Documentation: PCI: Guide to use PCI endpoint configfs
> PCI: endpoint: Create configfs entry for EPC device and EPF driver
> Documentation: PCI: Add specification for the *PCI test* function device
> PCI: endpoint: functions: Add an EP function to test PCI
> Documentation: PCI: Add binding documentation for pci-test endpoint function
> PCI: dwc: designware: Add EP mode support
> dt-bindings: PCI: Add DT bindings for PCI designware EP mode
> PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
> PCI: dwc: dra7xx: Add EP mode support
> dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
> PCI: dwc: dra7xx: Workaround for errata id i870
> dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
> PCI: Add device IDs for DRA74x and DRA72x
> misc: Add host side PCI driver for PCI test function device
> Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
> tools: PCI: Add a userspace tool to test PCI endpoint
> tools: PCI: Add sample test script to invoke pcitest
> Documentation: PCI: Add userguide for PCI endpoint test function
> MAINTAINERS: Add PCI Endpoint maintainer
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
>
> Documentation/PCI/00-INDEX | 10 +++
> Documentation/PCI/endpoint/function/binding/pci-test.txt | 17 +++++
> Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 105 ++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-endpoint.txt | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-test-function.txt | 66 ++++++++++++++++
> Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++++++++++++++++++++
> Documentation/devicetree/bindings/pci/designware-pcie.txt | 26 +++++--
> Documentation/devicetree/bindings/pci/ti-pci.txt | 42 +++++++++--
> Documentation/misc-devices/pci-endpoint-test.txt | 35 +++++++++
> MAINTAINERS | 9 +++
> arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
> drivers/Makefile | 2 +
> drivers/misc/Kconfig | 7 ++
> drivers/misc/Makefile | 1 +
> drivers/misc/pci_endpoint_test.c | 534 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/Kconfig | 1 +
> drivers/pci/dwc/Kconfig | 36 ++++++++-
> drivers/pci/dwc/Makefile | 5 +-
> drivers/pci/dwc/pci-dra7xx.c | 270 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.c | 125 ++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.h | 112 +++++++++++++++++++++++++++
> drivers/pci/endpoint/Kconfig | 31 ++++++++
> drivers/pci/endpoint/Makefile | 7 ++
> drivers/pci/endpoint/functions/Kconfig | 12 +++
> drivers/pci/endpoint/functions/Makefile | 5 ++
> drivers/pci/endpoint/functions/pci-epf-test.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-ep-cfs.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-core.c | 579 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-mem.c | 143 +++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epf-core.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mod_devicetable.h | 10 +++
> include/linux/pci-ep-cfs.h | 41 ++++++++++
> include/linux/pci-epc.h | 144 +++++++++++++++++++++++++++++++++++
> include/linux/pci-epf.h | 162 +++++++++++++++++++++++++++++++++++++++
> include/linux/pci_ids.h | 2 +
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/pcitest.h | 19 +++++
> tools/pci/pcitest.c | 186 +++++++++++++++++++++++++++++++++++++++++++++
> tools/pci/pcitest.sh | 56 ++++++++++++++
> 40 files changed, 4869 insertions(+), 40 deletions(-)
> create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt
> create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
> create mode 100644 drivers/misc/pci_endpoint_test.c
> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
> create mode 100644 drivers/pci/endpoint/Kconfig
> create mode 100644 drivers/pci/endpoint/Makefile
> create mode 100644 drivers/pci/endpoint/functions/Kconfig
> create mode 100644 drivers/pci/endpoint/functions/Makefile
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
> create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
> create mode 100644 drivers/pci/endpoint/pci-epc-core.c
> create mode 100644 drivers/pci/endpoint/pci-epc-mem.c
> create mode 100644 drivers/pci/endpoint/pci-epf-core.c
> create mode 100644 include/linux/pci-ep-cfs.h
> create mode 100644 include/linux/pci-epc.h
> create mode 100644 include/linux/pci-epf.h
> create mode 100644 include/uapi/linux/pcitest.h
> create mode 100644 tools/pci/pcitest.c
> create mode 100644 tools/pci/pcitest.sh
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: helgaas@kernel.org (Bjorn Helgaas)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] PCI: Support for configurable PCI endpoint
Date: Mon, 10 Apr 2017 10:43:28 -0500 [thread overview]
Message-ID: <20170410154328.GB13170@bhelgaas-glaptop.roam.corp.google.com> (raw)
In-Reply-To: <20170405085243.18123-1-kishon@ti.com>
On Wed, Apr 05, 2017 at 02:22:20PM +0530, Kishon Vijay Abraham I wrote:
> Hi Bjorn,
>
> Please find the pull request for PCI endpoint support below. I've
> also included all the history here.
Thanks, I applied these (with v7 of the first patch) to pci/host-designware
for v4.12.
> Changes from v5:
> *) remove #syscon-cells property added in v5 and used
> of_parse_phandle_with_fixed_args
> *) fix compilation error in make.cross ARCH=blackfin that was because
> pci_endpoint_test.c driver depends on COMPILE_TEST.
>
> Changes from v4:
> *) add #syscon-cells property and used of_parse_phandle_with_args
> to perform a configuration in syscon module (as suggested by
> Rob Herring)
> *) Remove unnecessary white space.
>
> Changes from v3:
> *) fixed a typo and adapted to https://lkml.org/lkml/2017/3/13/562.
>
> Changes from v2:
> *) changed the configfs structure as suggested by Christoph Hellwig. With
> this change the framework creates configfs entry for EP function driver
> and EP controller. Previously these entries have to be created by the
> the user. (Haven't changed the epc core or epf core except for invoking
> configfs APIs to create entries for EP function driver and EP controller.
> That's mostly because the EP function device can still be created by
> directly invoking the epf core API without using configfs).
> *) Now the user has to use configfs entry 'start' to start the link.
> This was previously done by the function driver. However in the case of
> multi function EP, the function driver shouldn't start the link.
>
> Changes from v1:
> *) The preparation patches for adding EP support is removed and is sent
> separately
> *) Added device ID for DRA74x/DRA72x and used it instead of
> using "PCI_ANY_ID"
> *) Added userguide for PCI endpoint test function
>
> Major Improvements from RFC:
> *) support multi-function devices (hw supported not virtual)
> *) Access host side buffers
> *) Raise MSI interrupts
> *) Add user space program to use the host side PCI driver
> *) Adapt all other users of designware to use the new design (only
> compile tested. Since I have only dra7xx boards, the new design
> has only been tested in dra7xx. I'd require the help of others
> to test the platforms they have access to).
>
> This is based on
> git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
> pci/host-designware
>
> Thanks
> Kishon
>
> The following changes since commit 7ea64dcf602c21b3e5062ca90111ca4459fab403:
>
> __end__ (2017-04-04 15:29:37 -0500)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/pci-endpoint.git tags/pci-endpoint-for-4.12
>
> for you to fetch changes up to a5c85ba45c9682456077d7277196e91f8ea5fd5c:
>
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP (2017-04-05 14:05:28 +0530)
>
> ----------------------------------------------------------------
> pci: endpoint: for 4.12
>
> *) Add PCI endpoint core layer
> *) Modify designware and dra7xx driver to be configured in EP mode
> *) Add a PCI endpoint *test* function driver and corresponding host
> driver
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>
> ----------------------------------------------------------------
> Kishon Vijay Abraham I (23):
> PCI: endpoint: Add EP core layer to enable EP controller and EP functions
> Documentation: PCI: Guide to use PCI Endpoint Core Layer
> PCI: endpoint: Introduce configfs entry for configuring EP functions
> Documentation: PCI: Guide to use PCI endpoint configfs
> PCI: endpoint: Create configfs entry for EPC device and EPF driver
> Documentation: PCI: Add specification for the *PCI test* function device
> PCI: endpoint: functions: Add an EP function to test PCI
> Documentation: PCI: Add binding documentation for pci-test endpoint function
> PCI: dwc: designware: Add EP mode support
> dt-bindings: PCI: Add DT bindings for PCI designware EP mode
> PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
> PCI: dwc: dra7xx: Add EP mode support
> dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
> PCI: dwc: dra7xx: Workaround for errata id i870
> dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
> PCI: Add device IDs for DRA74x and DRA72x
> misc: Add host side PCI driver for PCI test function device
> Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
> tools: PCI: Add a userspace tool to test PCI endpoint
> tools: PCI: Add sample test script to invoke pcitest
> Documentation: PCI: Add userguide for PCI endpoint test function
> MAINTAINERS: Add PCI Endpoint maintainer
> ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
>
> Documentation/PCI/00-INDEX | 10 +++
> Documentation/PCI/endpoint/function/binding/pci-test.txt | 17 +++++
> Documentation/PCI/endpoint/pci-endpoint-cfs.txt | 105 ++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-endpoint.txt | 215 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> Documentation/PCI/endpoint/pci-test-function.txt | 66 ++++++++++++++++
> Documentation/PCI/endpoint/pci-test-howto.txt | 179 +++++++++++++++++++++++++++++++++++++++++++
> Documentation/devicetree/bindings/pci/designware-pcie.txt | 26 +++++--
> Documentation/devicetree/bindings/pci/ti-pci.txt | 42 +++++++++--
> Documentation/misc-devices/pci-endpoint-test.txt | 35 +++++++++
> MAINTAINERS | 9 +++
> arch/arm/mach-omap2/clockdomains7xx_data.c | 2 +-
> drivers/Makefile | 2 +
> drivers/misc/Kconfig | 7 ++
> drivers/misc/Makefile | 1 +
> drivers/misc/pci_endpoint_test.c | 534 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/Kconfig | 1 +
> drivers/pci/dwc/Kconfig | 36 ++++++++-
> drivers/pci/dwc/Makefile | 5 +-
> drivers/pci/dwc/pci-dra7xx.c | 270 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----
> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.c | 125 ++++++++++++++++++++++++++++++
> drivers/pci/dwc/pcie-designware.h | 112 +++++++++++++++++++++++++++
> drivers/pci/endpoint/Kconfig | 31 ++++++++
> drivers/pci/endpoint/Makefile | 7 ++
> drivers/pci/endpoint/functions/Kconfig | 12 +++
> drivers/pci/endpoint/functions/Makefile | 5 ++
> drivers/pci/endpoint/functions/pci-epf-test.c | 510 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-ep-cfs.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-core.c | 579 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epc-mem.c | 143 +++++++++++++++++++++++++++++++++++
> drivers/pci/endpoint/pci-epf-core.c | 351 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mod_devicetable.h | 10 +++
> include/linux/pci-ep-cfs.h | 41 ++++++++++
> include/linux/pci-epc.h | 144 +++++++++++++++++++++++++++++++++++
> include/linux/pci-epf.h | 162 +++++++++++++++++++++++++++++++++++++++
> include/linux/pci_ids.h | 2 +
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/pcitest.h | 19 +++++
> tools/pci/pcitest.c | 186 +++++++++++++++++++++++++++++++++++++++++++++
> tools/pci/pcitest.sh | 56 ++++++++++++++
> 40 files changed, 4869 insertions(+), 40 deletions(-)
> create mode 100644 Documentation/PCI/endpoint/function/binding/pci-test.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint-cfs.txt
> create mode 100644 Documentation/PCI/endpoint/pci-endpoint.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-function.txt
> create mode 100644 Documentation/PCI/endpoint/pci-test-howto.txt
> create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt
> create mode 100644 drivers/misc/pci_endpoint_test.c
> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
> create mode 100644 drivers/pci/endpoint/Kconfig
> create mode 100644 drivers/pci/endpoint/Makefile
> create mode 100644 drivers/pci/endpoint/functions/Kconfig
> create mode 100644 drivers/pci/endpoint/functions/Makefile
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-test.c
> create mode 100644 drivers/pci/endpoint/pci-ep-cfs.c
> create mode 100644 drivers/pci/endpoint/pci-epc-core.c
> create mode 100644 drivers/pci/endpoint/pci-epc-mem.c
> create mode 100644 drivers/pci/endpoint/pci-epf-core.c
> create mode 100644 include/linux/pci-ep-cfs.h
> create mode 100644 include/linux/pci-epc.h
> create mode 100644 include/linux/pci-epf.h
> create mode 100644 include/uapi/linux/pcitest.h
> create mode 100644 tools/pci/pcitest.c
> create mode 100644 tools/pci/pcitest.sh
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2017-04-10 15:43 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 8:52 [GIT PULL] PCI: Support for configurable PCI endpoint Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 16:52 ` Bjorn Helgaas
2017-04-05 16:52 ` Bjorn Helgaas
2017-04-05 16:52 ` Bjorn Helgaas
2017-04-05 16:52 ` Bjorn Helgaas
2017-04-06 5:19 ` Kishon Vijay Abraham I
2017-04-06 5:19 ` Kishon Vijay Abraham I
2017-04-06 5:19 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 02/23] Documentation: PCI: Guide to use PCI Endpoint Core Layer Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 03/23] PCI: endpoint: Introduce configfs entry for configuring EP functions Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 04/23] Documentation: PCI: Guide to use PCI endpoint configfs Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 05/23] PCI: endpoint: Create configfs entry for EPC device and EPF driver Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 06/23] Documentation: PCI: Add specification for the *PCI test* function device Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 07/23] PCI: endpoint: functions: Add an EP function to test PCI Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 08/23] Documentation: PCI: Add binding documentation for pci-test endpoint function Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 09/23] PCI: dwc: designware: Add EP mode support Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 10/23] dt-bindings: PCI: Add DT bindings for PCI designware EP mode Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 11/23] PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 12/23] PCI: dwc: dra7xx: Add EP mode support Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 13/23] dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 14/23] PCI: dwc: dra7xx: Workaround for errata id i870 Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 15/23] dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 16/23] PCI: Add device IDs for DRA74x and DRA72x Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 17/23] misc: Add host side PCI driver for PCI test function device Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 18/23] Documentation: misc-devices: Add Documentation for pci-endpoint-test driver Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 19/23] tools: PCI: Add a userspace tool to test PCI endpoint Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 20/23] tools: PCI: Add sample test script to invoke pcitest Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 21/23] Documentation: PCI: Add userguide for PCI endpoint test function Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 22/23] MAINTAINERS: Add PCI Endpoint maintainer Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` [PATCH v6 23/23] ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-05 8:52 ` Kishon Vijay Abraham I
2017-04-10 13:55 ` [PATCH v7 01/23] PCI: endpoint: Add EP core layer to enable EP controller and EP functions Kishon Vijay Abraham I
2017-04-10 13:55 ` Kishon Vijay Abraham I
2017-04-10 13:55 ` Kishon Vijay Abraham I
2017-04-10 13:55 ` Kishon Vijay Abraham I
2022-12-13 23:44 ` Bjorn Helgaas
2022-12-13 23:44 ` Bjorn Helgaas
2017-04-10 15:43 ` Bjorn Helgaas [this message]
2017-04-10 15:43 ` [GIT PULL] PCI: Support for configurable PCI endpoint Bjorn Helgaas
2017-04-10 15:43 ` Bjorn Helgaas
2017-04-10 15:43 ` Bjorn Helgaas
2017-04-11 19:34 ` Bjorn Helgaas
2017-04-11 19:34 ` Bjorn Helgaas
2017-04-11 19:34 ` Bjorn Helgaas
2017-04-12 5:43 ` Kishon Vijay Abraham I
2017-04-12 5:43 ` Kishon Vijay Abraham I
2017-04-12 5:43 ` Kishon Vijay Abraham I
-- strict thread matches above, loose matches on Subject: below --
2017-03-27 9:44 Kishon Vijay Abraham I
2017-03-27 9:44 ` Kishon Vijay Abraham I
2017-03-27 9:44 ` Kishon Vijay Abraham I
2017-03-27 9:44 ` Kishon Vijay Abraham I
2017-03-29 11:42 ` Niklas Cassel
2017-03-29 11:42 ` Niklas Cassel
2017-03-29 11:42 ` Niklas Cassel
2017-03-29 11:42 ` Niklas Cassel
2017-03-29 12:10 ` Kishon Vijay Abraham I
2017-03-29 12:10 ` Kishon Vijay Abraham I
2017-03-29 12:10 ` Kishon Vijay Abraham I
2017-03-29 12:10 ` Kishon Vijay Abraham I
2017-03-29 12:36 ` Kishon Vijay Abraham I
2017-03-29 12:36 ` Kishon Vijay Abraham I
2017-03-29 12:36 ` Kishon Vijay Abraham I
2017-03-29 13:13 ` Niklas Cassel
2017-03-29 13:13 ` Niklas Cassel
2017-03-29 13:13 ` Niklas Cassel
2017-03-29 13:13 ` Niklas Cassel
2017-04-04 20:36 ` Bjorn Helgaas
2017-04-04 20:36 ` Bjorn Helgaas
2017-04-04 20:36 ` Bjorn Helgaas
2017-04-05 8:47 ` Kishon Vijay Abraham I
2017-04-05 8:47 ` Kishon Vijay Abraham I
2017-04-05 8:47 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170410154328.GB13170@bhelgaas-glaptop.roam.corp.google.com \
--to=helgaas@kernel.org \
--cc=Joao.Pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=hch@infradead.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nsekhar@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.