From: Lee Jones <lee.jones@linaro.org> To: Javier Martinez Canillas <javier@osg.samsung.com> Cc: linux-kernel@vger.kernel.org, "Aaro Koskinen" <aaro.koskinen@iki.fi>, devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>, "Tony Lindgren" <tony@atomide.com>, "Benoît Cousson" <bcousson@baylibre.com>, "Mark Rutland" <mark.rutland@arm.com>, linux-omap@vger.kernel.org, "Russell King" <linux@armlinux.org.uk>, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name Date: Tue, 11 Apr 2017 14:56:04 +0100 [thread overview] Message-ID: <20170411135604.x2bavwti7atebwux@dell> (raw) In-Reply-To: <20170404153036.6651-3-javier@osg.samsung.com> On Tue, 04 Apr 2017, Javier Martinez Canillas wrote: > It's not correct to encode the subsystem in the I2C device name, so > drop the -mfd suffix. To maintain bisect-ability, change driver and > platform code / DTS users in the same patch. > > Suggested-by: Lee Jones <lee.jones@linaro.org> > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > Changes in v4: None > Changes in v3: None > Changes in v2: None > > arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 4 ++-- > arch/arm/mach-omap1/board-nokia770.c | 4 ++-- > drivers/mfd/retu-mfd.c | 4 ++-- > 3 files changed, 6 insertions(+), 6 deletions(-) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> > diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi > index 7e5ffc583c90..1b06430c8013 100644 > --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi > +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi > @@ -15,8 +15,8 @@ > >; > #address-cells = <1>; > #size-cells = <0>; > - retu_mfd: retu@1 { > - compatible = "retu-mfd"; > + retu: retu@1 { > + compatible = "retu"; > interrupt-parent = <&gpio4>; > interrupts = <12 IRQ_TYPE_EDGE_RISING>; > reg = <0x1>; > diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c > index ee8d9f553db4..06243c0b12d2 100644 > --- a/arch/arm/mach-omap1/board-nokia770.c > +++ b/arch/arm/mach-omap1/board-nokia770.c > @@ -233,10 +233,10 @@ static struct platform_device nokia770_cbus_device = { > > static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { > { > - I2C_BOARD_INFO("retu-mfd", 0x01), > + I2C_BOARD_INFO("retu", 0x01), > }, > { > - I2C_BOARD_INFO("tahvo-mfd", 0x02), > + I2C_BOARD_INFO("tahvo", 0x02), > }, > }; > > diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c > index d4c114abeb75..53e1d386d2c0 100644 > --- a/drivers/mfd/retu-mfd.c > +++ b/drivers/mfd/retu-mfd.c > @@ -302,8 +302,8 @@ static int retu_remove(struct i2c_client *i2c) > } > > static const struct i2c_device_id retu_id[] = { > - { "retu-mfd", 0 }, > - { "tahvo-mfd", 0 }, > + { "retu", 0 }, > + { "tahvo", 0 }, > { } > }; > MODULE_DEVICE_TABLE(i2c, retu_id); -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
WARNING: multiple messages have this Message-ID (diff)
From: lee.jones@linaro.org (Lee Jones) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name Date: Tue, 11 Apr 2017 14:56:04 +0100 [thread overview] Message-ID: <20170411135604.x2bavwti7atebwux@dell> (raw) In-Reply-To: <20170404153036.6651-3-javier@osg.samsung.com> On Tue, 04 Apr 2017, Javier Martinez Canillas wrote: > It's not correct to encode the subsystem in the I2C device name, so > drop the -mfd suffix. To maintain bisect-ability, change driver and > platform code / DTS users in the same patch. > > Suggested-by: Lee Jones <lee.jones@linaro.org> > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > --- > > Changes in v4: None > Changes in v3: None > Changes in v2: None > > arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 4 ++-- > arch/arm/mach-omap1/board-nokia770.c | 4 ++-- > drivers/mfd/retu-mfd.c | 4 ++-- > 3 files changed, 6 insertions(+), 6 deletions(-) For my own reference: Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> > diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi > index 7e5ffc583c90..1b06430c8013 100644 > --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi > +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi > @@ -15,8 +15,8 @@ > >; > #address-cells = <1>; > #size-cells = <0>; > - retu_mfd: retu at 1 { > - compatible = "retu-mfd"; > + retu: retu at 1 { > + compatible = "retu"; > interrupt-parent = <&gpio4>; > interrupts = <12 IRQ_TYPE_EDGE_RISING>; > reg = <0x1>; > diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c > index ee8d9f553db4..06243c0b12d2 100644 > --- a/arch/arm/mach-omap1/board-nokia770.c > +++ b/arch/arm/mach-omap1/board-nokia770.c > @@ -233,10 +233,10 @@ static struct platform_device nokia770_cbus_device = { > > static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { > { > - I2C_BOARD_INFO("retu-mfd", 0x01), > + I2C_BOARD_INFO("retu", 0x01), > }, > { > - I2C_BOARD_INFO("tahvo-mfd", 0x02), > + I2C_BOARD_INFO("tahvo", 0x02), > }, > }; > > diff --git a/drivers/mfd/retu-mfd.c b/drivers/mfd/retu-mfd.c > index d4c114abeb75..53e1d386d2c0 100644 > --- a/drivers/mfd/retu-mfd.c > +++ b/drivers/mfd/retu-mfd.c > @@ -302,8 +302,8 @@ static int retu_remove(struct i2c_client *i2c) > } > > static const struct i2c_device_id retu_id[] = { > - { "retu-mfd", 0 }, > - { "tahvo-mfd", 0 }, > + { "retu", 0 }, > + { "tahvo", 0 }, > { } > }; > MODULE_DEVICE_TABLE(i2c, retu_id); -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2017-04-11 13:56 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-04-04 15:30 [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-04 15:30 ` [PATCH v4 1/8] dt-bindings: mfd: Add retu/tahvo ASIC chips bindings Javier Martinez Canillas 2017-04-04 16:54 ` Rob Herring 2017-04-04 17:01 ` Javier Martinez Canillas 2017-04-04 17:01 ` Javier Martinez Canillas 2017-04-11 13:57 ` Lee Jones 2017-04-04 15:30 ` [PATCH v4 2/8] mfd: retu: Drop -mfd suffix from I2C device ID name Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-11 13:56 ` Lee Jones [this message] 2017-04-11 13:56 ` Lee Jones 2017-04-04 15:30 ` [PATCH v4 3/8] mfd: retu: Add OF device ID table Javier Martinez Canillas 2017-04-11 13:56 ` Lee Jones 2017-04-11 13:56 ` Lee Jones 2017-04-04 15:30 ` [PATCH v4 4/8] ARM: dts: n8x0: Add vendor prefix to retu node Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-04 15:30 ` [PATCH v4 5/8] i2c: i2c-cbus-gpio: Add vendor prefix to retu node in example Javier Martinez Canillas 2017-04-04 15:30 ` [PATCH v4 6/8] dt-bindings: mfd: Add TI tps6105x chip bindings Javier Martinez Canillas 2017-04-04 15:30 ` [PATCH v4 7/8] mfd: tps6105x: Add OF device ID table Javier Martinez Canillas 2017-04-11 13:57 ` Lee Jones 2017-04-11 13:57 ` Lee Jones 2017-04-04 15:30 ` [PATCH v4 8/8] ARM: ux500: Add vendor prefix to tps61052 node Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-04 15:30 ` Javier Martinez Canillas 2017-04-04 16:54 ` [PATCH v4 0/8] mfd: Add OF device table to I2C drivers that are missing it Rob Herring 2017-04-04 16:54 ` Rob Herring 2017-04-04 17:38 ` Aaro Koskinen 2017-04-04 17:38 ` Aaro Koskinen 2017-04-04 17:43 ` Tony Lindgren 2017-04-04 17:43 ` Tony Lindgren 2017-04-04 17:43 ` Tony Lindgren 2017-04-04 17:46 ` Javier Martinez Canillas 2017-04-04 17:46 ` Javier Martinez Canillas 2017-04-04 17:46 ` Javier Martinez Canillas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170411135604.x2bavwti7atebwux@dell \ --to=lee.jones@linaro.org \ --cc=aaro.koskinen@iki.fi \ --cc=bcousson@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=javier@osg.samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.