[PATCH 4.9 000/152] 4.9.22-stable review

[PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.22 release.
There are 152 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.22-rc1

Matjaz Hegedic <matjaz.hegedic@gmail.com>
    x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk

Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
    usb-storage: Add ignore-residue quirk for Initio INIC-3619

Matjaz Hegedic <matjaz.hegedic@gmail.com>
    x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk

Matjaz Hegedic <matjaz.hegedic@gmail.com>
    x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk

Len Brown <len.brown@intel.com>
    tools/power turbostat: dump Atom P-states correctly

Len Brown <len.brown@intel.com>
    tools/power turbostat: decode Baytrail CC6 and MC6 demotion configuration

João Paulo Rechi Vita <jprvita@gmail.com>
    platform/x86: asus-wmi: Detect quirk_no_rfkill from the DSDT

Kai-Chuan Hsieh <kai.chiuan@gmail.com>
    platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB

Krzysztof Kozlowski <krzk@kernel.org>
    watchdog: s3c2410: Fix infinite interrupt in soft mode

Sinan Kaya <okaya@codeaurora.org>
    PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    PCI: Sort the list of devices with D3 delay quirk by ID

yangbo lu <yangbo.lu@nxp.com>
    mmc: sdhci-of-esdhc: remove default broken-cd for ARM

Dongdong Liu <liudongdong3@huawei.com>
    PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports

Jon Mason <jon.mason@broadcom.com>
    PCI: Add Broadcom Northstar2 PAXC quirk for device class and MPSS

Will Deacon <will.deacon@arm.com>
    ARM: smccc: Update HVC comment to describe new quirk parameter

Baoyou Xie <baoyou.xie@linaro.org>
    drm/msm/adreno: move function declarations to header file

Andy Gross <andy.gross@linaro.org>
    firmware: qcom: scm: Fix interrupted SCM calls

Andy Gross <andy.gross@linaro.org>
    arm: kernel: Add SMC structure parameter

Ping Cheng <pinglinux@gmail.com>
    HID: wacom: don't apply generic settings to old devices

Mylène Josserand <mylene.josserand@free-electrons.com>
    ASoC: sun4i-i2s: Add quirks to handle a31 compatible

Alexandre Bailon <abailon@baylibre.com>
    usb: musb: da8xx: Fix host mode suspend

Zhang Rui <rui.zhang@intel.com>
    ACPI: save NVS memory for Lenovo G50-45

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: Intel: cht_bsw_rt5645: add Baytrail MCLK support

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: Intel: cht_bsw_rt5645: harden ACPI device detection

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: Intel: Baytrail: add quirk for Lenovo Thinkpad 10

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: codecs: rt5670: add quirk for Lenovo Thinkpad 10

Takashi Iwai <tiwai@suse.de>
    ASoC: rt5670: Add missing 10EC5072 ACPI ID

Lv Zheng <lv.zheng@intel.com>
    ACPI / button: Change default behavior to lid_init_state=open

Bartosz Golaszewski <bgolaszewski@baylibre.com>
    sata: ahci-da850: implement a workaround for the softreset quirk

Sean Young <sean@mess.org>
    rx51: broken build

Dan Carpenter <dan.carpenter@oracle.com>
    PCI: xgene: Fix double free on init error

Alex Williamson <alex.williamson@redhat.com>
    PCI: Add ACS quirk for Intel Union Point

Patrice Chotard <patrice.chotard@st.com>
    ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/mga: remove device_is_agp callback

Felipe Balbi <felipe.balbi@linux.intel.com>
    usb: dwc3: host: pass quirk-broken-port-ped property for known broken revisions

Felipe Balbi <balbi@ti.com>
    usb: host: xhci-plat: enable BROKEN_PED quirk if platform requested

Felipe Balbi <balbi@ti.com>
    usb: xhci: add quirk flag for broken PED bits

Kevin Hilman <khilman@baylibre.com>
    ARM: davinci: add skeleton for pdata-quirks

Kevin Hilman <khilman@baylibre.com>
    ARM: davinci: PM: support da8xx DT platforms

Lendacky, Thomas <Thomas.Lendacky@amd.com>
    amd-xgbe: Prepare for working with more than one type of phy

Geert Uytterhoeven <geert+renesas@glider.be>
    Input: gpio_keys - add support for GPIO descriptors

Vignesh R <vigneshr@ti.com>
    serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x

Stephen Boyd <stephen.boyd@linaro.org>
    usb: chipidea: msm: Rely on core to override AHBBURST

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix init for multiple quirks for the same SoC

subhashj@codeaurora.org <subhashj@codeaurora.org>
    scsi: ufs: issue link starup 2 times if device isn't active

Zang Leigang <zangleigang@hisilicon.com>
    scsi: ufs: introduce a new ufshcd_statea UFSHCD_STATE_EH_SCHEDULED

youling257 <youling257@gmail.com>
    ASoC: Intel: bytcr_rt5640: quirks for Insyde devices

Paulo Zanoni <paulo.r.zanoni@intel.com>
    drm/i915: actually drive the BDW reserved IDs

Paulo Zanoni <paulo.r.zanoni@intel.com>
    drm/i915: more .is_mobile cleanups for BDW

Paulo Zanoni <paulo.r.zanoni@intel.com>
    drm/i915: fix INTEL_BDW_IDS definition

Jani Nikula <jani.nikula@intel.com>
    drm/edid: constify edid quirk list

Marcel Hasler <mahasler@gmail.com>
    HID: usbhid: Add quirk for Mayflash/Dragonrise DolphinBar.

Alex Wood <thetewood@gmail.com>
    HID: usbhid: Add quirk for the Futaba TOSD-5711BB VFD

Lv Zheng <lv.zheng@intel.com>
    ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding

Keith Busch <keith.busch@intel.com>
    nvme: simplify stripe quirk

Yuta Kobayashi <alu.ula@outlook.com>
    HID: multitouch: enable the Surface 4 Type Cover Pro (JP) to report multitouch data

Daniel Keller <daniel.keller@gcd.de>
    HID: microsoft: Add Surface 4 type cover pro 4 not JP versions

Brendan McGrath <redmcg@redmandi.dyndns.org>
    HID: asus: Fix keyboard support

Brendan McGrath <redmcg@redmandi.dyndns.org>
    HID: asus: Add i2c touchpad support

Lee, Chun-Yi <joeyli.kernel@gmail.com>
    platform/x86: acer-wmi: Only supports AMW0_GUID1 on acer family

Nobutaka Okabe <nob77413@gmail.com>
    ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC

Bjorn Helgaas <bhelgaas@google.com>
    PCI: Expand "VPD access disabled" quirk message

Alberto Aguirre <albaguirre@gmail.com>
    ALSA: usb-audio: add implicit fb quirk for Axe-Fx II

Subhash Jadavani <subhashj@codeaurora.org>
    scsi: ufs: add quirk to increase host PA_SaveConfigTime

Bjorn Helgaas <bhelgaas@google.com>
    PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategy

Duc Dang <dhdang@apm.com>
    PCI: Add MCFG quirks for X-Gene host controller

Tomasz Nowicki <tn@semihalf.com>
    PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller

Tomasz Nowicki <tn@semihalf.com>
    PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller

Bjorn Helgaas <bhelgaas@google.com>
    PCI: thunder-pem: Factor out resource lookup

Dongdong Liu <liudongdong3@huawei.com>
    PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers

Christopher Covington <cov@codeaurora.org>
    PCI: Add MCFG quirks for Qualcomm QDF2432 host controller

Tomasz Nowicki <tn@semihalf.com>
    PCI/ACPI: Check for platform-specific MCFG quirks

Tomasz Nowicki <tn@semihalf.com>
    PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors

Bjorn Helgaas <bhelgaas@google.com>
    arm64: PCI: Search ACPI namespace to ensure ECAM space is reserved

Bjorn Helgaas <bhelgaas@google.com>
    arm64: PCI: Add local struct device pointers

Tomasz Nowicki <tn@semihalf.com>
    arm64: PCI: Manage controller-specific data on per-controller basis

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    x86/intel_idle: Add CPU model 0x4a (Atom Z34xx series)

Chuck Lever <chuck.lever@oracle.com>
    svcauth_gss: Close connection when dropping an incoming message

Subhash Jadavani <subhashj@codeaurora.org>
    scsi: ufs: ensure that host pa_tactivate is higher than device

Ritesh Harjani <riteshh@codeaurora.org>
    mmc: sdhci-msm: Enable few quirks

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    HID: multitouch: do not retrieve all reports for all devices

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    HID: multitouch: enable the Surface 3 Type Cover to report multitouch data

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    HID: sensor-hub: add quirk for Microchip MM7150

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    HID: sensor-hub add quirk for Microsoft Surface 3

Kiwoong Kim <kwmad.kim@samsung.com>
    scsi: ufs: introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk

Brian Norris <briannorris@chromium.org>
    clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend

Bjorn Helgaas <bhelgaas@google.com>
    net/mlx4_core: Use device ID defines

John Garry <john.garry@huawei.com>
    arm64: dts: hisi: fix hip06 sas am-max-trans quirk

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ASoC: Intel: bytct_rt5640: change default capture settings

Janusz Dziedzic <januszx.dziedzic@intel.com>
    usb: dwc3: gadget: delay unmap of bounced requests

HungNien Chen <hn.chen@weidahitech.com>
    HID: i2c-hid: add a simple quirk to fix device defects

Marcel Hasler <mahasler@gmail.com>
    HID: usbhid: Add quirks for Mayflash/Dragonrise GameCube and PS3 adapters

Vladimir Zapolskiy <vz@mleia.com>
    clk: lpc32xx: add a quirk for PWM and MS clock dividers

Chen-Yu Tsai <wens@csie.org>
    drm/sun4i: Add compatible string for A31/A31s TCON (timing controller)

Chen-Yu Tsai <wens@csie.org>
    drm/sun4i: Add compatible strings for A31/A31s display pipelines

Chen-Yu Tsai <wens@csie.org>
    drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure

Jason A. Donenfeld <Jason@zx2c4.com>
    random: use chacha20 for get_random_int/long

Chris Salls <salls@cs.ucsb.edu>
    mm/mempolicy.c: fix error handling in set_mempolicy and mbind.

Johan Hovold <johan@kernel.org>
    Documentation: stable-kernel-rules: fix stable-tag format

Huacai Chen <chenhc@lemote.com>
    MIPS: c-r4k: Fix Loongson-3's vcache/scache waysize calculation

Huacai Chen <chenhc@lemote.com>
    MIPS: Flush wrong invalid FTLB entry for huge page

Huacai Chen <chenhc@lemote.com>
    MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2

Huacai Chen <chenhc@lemote.com>
    MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3

Hauke Mehrtens <hauke@hauke-m.de>
    MIPS: Lantiq: fix missing xbar kernel panic

Paul Burton <paul.burton@imgtec.com>
    MIPS: End spinlocks with .insn

John Crispin <john@phrozen.org>
    MIPS: ralink: Fix typos in rt3883 pinctrl

James Hogan <james.hogan@imgtec.com>
    MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

Heiko Carstens <heiko.carstens@de.ibm.com>
    s390/uaccess: get_user() should zero on failure (again)

Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
    s390/decompressor: fix initrd corruption caused by bss clear

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: make __pa work with uncached KSEG addresses

Tobias Klauser <tklauser@distanz.ch>
    nios2: reserve boot memory for device tree

Dmitry Bilunov <kmeaw@yandex-team.ru>
    dm raid: fix NULL pointer dereference for raid1 without bitmap

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()

Paul Mackerras <paulus@ozlabs.org>
    powerpc: Don't try to fix up misaligned load-with-reservation instructions

Oliver O'Halloran <oohall@gmail.com>
    powerpc/64: Fix flush_(d|i)cache_range() called from modules

Frederic Barrat <fbarrat@linux.vnet.ibm.com>
    powerpc/mm: Add missing global TLB invalidate if cxl is active

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    powerpc: Disable HFSCR[TM] if TM is not supported

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Add missing fixups

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Fix src fixup in from user rapf loops

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Set flags before ADDZ

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Zero rest of buffer from copy_from_user

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Add early abort to copy_to_user

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Fix alignment error checking

James Hogan <james.hogan@imgtec.com>
    metag/usercopy: Drop unused macros

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: use local iftype avoiding use-after-free of virtual interface

Johannes Berg <johannes.berg@intel.com>
    mac80211: unconditionally start new netdev queues with iTXQ support

Wei Yongjun <yongjun_wei@trendmicro.com.cn>
    ring-buffer: Fix return value check in test_ringbuffer()

Calvin Owens <calvinowens@fb.com>
    xfs: Honor FALLOC_FL_KEEP_SIZE when punching ends of files

Martin Brandenburg <martin@omnibond.com>
    orangefs: move features validation to fix filesystem hang

Arnd Bergmann <arnd@arndb.de>
    Kbuild: use cc-disable-warning consistently for maybe-uninitialized

Dmitry Torokhov <dmitry.torokhov@gmail.com>
    ACPI / gpio: do not fall back to parsing _CRS when we get a deferral

Sami Tolvanen <samitolvanen@google.com>
    dm verity fec: fix bufio leaks

Sami Tolvanen <samitolvanen@google.com>
    dm verity fec: limit error correction recursion

bsegall@google.com <bsegall@google.com>
    ptrace: fix PTRACE_LISTEN race corrupting task->state

Alexander Polakov <apolyakov@beget.ru>
    mm/page_alloc.c: fix print order in show_free_areas()

Jan-Marek Glogowski <glogow@fbihome.de>
    Reset TreeId to zero on SMB2 TREE_CONNECT

Arend Van Spriel <arend.vanspriel@broadcom.com>
    cfg80211: check rdev resume callback only for registered wiphy

Victor Kamensky <kamensky@cisco.com>
    arm64: mm: unaligned access by user-land should be received as SIGBUS

Quentin Schulz <quentin.schulz@free-electrons.com>
    iio: bmg160: reset chip when probing

Suzuki K Poulose <suzuki.poulose@arm.com>
    kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd

Marc Zyngier <marc.zyngier@arm.com>
    arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region

Marc Zyngier <marc.zyngier@arm.com>
    arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

Shuxiao Zhang <zhangshuxiao@xiaomi.com>
    staging: android: ashmem: lseek failed due to no FMODE_LSEEK.

NeilBrown <neilb@suse.com>
    sysfs: be careful of error returns from ops->show()

Li Qiang <liq3ea@gmail.com>
    drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Remove getparam error message

Thomas Hellstrom <thellstrom@vmware.com>
    drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces

Murray McAllister <murray.mcallister@insomniasec.com>
    drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()

Murray McAllister <murray.mcallister@insomniasec.com>
    drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Type-check lookups of fence objects

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    ppdev: fix registering same device name

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    ppdev: check before attaching port


-------------

Diffstat:

 .../devicetree/bindings/arm/arch_timer.txt         |   5 +
 .../bindings/display/sunxi/sun4i-drm.txt           |   8 +-
 Documentation/devicetree/bindings/usb/usb-xhci.txt |   1 +
 .../devicetree/bindings/watchdog/samsung-wdt.txt   |   9 +-
 Documentation/kernel-parameters.txt                |  10 +
 Documentation/stable_kernel_rules.txt              |   2 +-
 Makefile                                           |   6 +-
 arch/arm/boot/dts/stih407-family.dtsi              |   1 +
 arch/arm/kernel/armksyms.c                         |   4 +-
 arch/arm/kernel/smccc-call.S                       |  14 +-
 arch/arm/kvm/mmu.c                                 |  23 +-
 arch/arm/mach-davinci/Makefile                     |   2 +-
 arch/arm/mach-davinci/da8xx-dt.c                   |   2 +
 arch/arm/mach-davinci/include/mach/common.h        |   2 +
 arch/arm/mach-davinci/pdata-quirks.c               |  39 +
 arch/arm/mach-omap2/pdata-quirks.c                 |   3 +-
 arch/arm64/boot/dts/hisilicon/hip06.dtsi           |   2 +-
 arch/arm64/kernel/arm64ksyms.c                     |   4 +-
 arch/arm64/kernel/asm-offsets.c                    |   7 +-
 arch/arm64/kernel/pci.c                            |  53 +-
 arch/arm64/kernel/smccc-call.S                     |  23 +-
 arch/arm64/mm/fault.c                              |  42 +-
 arch/metag/include/asm/uaccess.h                   |  15 +-
 arch/metag/lib/usercopy.c                          | 312 +++-----
 arch/mips/Kconfig                                  |   2 +-
 arch/mips/include/asm/spinlock.h                   |   8 +-
 arch/mips/kernel/cpu-probe.c                       |   2 +-
 arch/mips/kernel/genex.S                           |   4 +-
 arch/mips/kernel/traps.c                           |  17 +-
 arch/mips/lantiq/xway/sysctrl.c                    |   2 +-
 arch/mips/mm/c-r4k.c                               |   2 +
 arch/mips/mm/tlbex.c                               |  25 +-
 arch/mips/ralink/rt3883.c                          |   4 +-
 arch/nios2/kernel/prom.c                           |   7 +
 arch/nios2/kernel/setup.c                          |   3 +
 arch/powerpc/crypto/crc32c-vpmsum_glue.c           |   3 +
 arch/powerpc/kernel/align.c                        |  27 +-
 arch/powerpc/kernel/misc_64.S                      |   4 +-
 arch/powerpc/kernel/setup_64.c                     |   9 +
 arch/powerpc/mm/hash_native_64.c                   |   7 +-
 arch/s390/boot/compressed/misc.c                   |  35 +-
 arch/s390/include/asm/uaccess.h                    |   2 +-
 arch/x86/kernel/reboot.c                           |  16 +
 arch/xtensa/include/asm/page.h                     |  13 +
 drivers/acpi/button.c                              |   2 +-
 drivers/acpi/internal.h                            |   1 +
 drivers/acpi/pci_mcfg.c                            | 190 ++++-
 drivers/acpi/scan.c                                |   1 +
 drivers/acpi/sleep.c                               |  19 +
 drivers/acpi/sysfs.c                               |  56 ++
 drivers/ata/ahci_da850.c                           |  33 +-
 drivers/char/ppdev.c                               |  33 +-
 drivers/char/random.c                              |  84 ++-
 drivers/clk/nxp/clk-lpc32xx.c                      |  32 +-
 drivers/clocksource/arm_arch_timer.c               |   9 +-
 drivers/firmware/qcom_scm-64.c                     |  13 +-
 drivers/gpio/gpiolib-acpi.c                        |   4 +-
 drivers/gpu/drm/drm_edid.c                         |   6 +-
 drivers/gpu/drm/i915/i915_pci.c                    |   1 +
 drivers/gpu/drm/mga/mga_dma.c                      |  20 +-
 drivers/gpu/drm/mga/mga_drv.c                      |  37 -
 drivers/gpu/drm/msm/adreno/adreno_device.c         |   3 -
 drivers/gpu/drm/msm/adreno/adreno_gpu.h            |   3 +
 drivers/gpu/drm/sun4i/sun4i_backend.c              |   1 +
 drivers/gpu/drm/sun4i/sun4i_drv.c                  |   5 +
 drivers/gpu/drm/sun4i/sun4i_tcon.c                 |  43 +-
 drivers/gpu/drm/sun4i/sun4i_tcon.h                 |  11 +-
 drivers/gpu/drm/ttm/ttm_object.c                   |  10 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c              |  79 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c              |   4 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c           |   4 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c            |  31 +-
 drivers/hid/Kconfig                                |   2 +-
 drivers/hid/hid-asus.c                             | 304 +++++++-
 drivers/hid/hid-core.c                             |   9 +-
 drivers/hid/hid-ids.h                              |  19 +-
 drivers/hid/hid-microsoft.c                        |   4 +-
 drivers/hid/hid-multitouch.c                       |  80 +-
 drivers/hid/hid-sensor-hub.c                       |   6 +
 drivers/hid/i2c-hid/i2c-hid.c                      |  57 ++
 drivers/hid/usbhid/hid-quirks.c                    |   8 +-
 drivers/hid/wacom_wac.c                            |   3 +
 drivers/idle/intel_idle.c                          |  49 ++
 drivers/iio/gyro/bmg160_core.c                     |  12 +
 drivers/input/keyboard/gpio_keys.c                 |  37 +-
 drivers/md/dm-raid.c                               |   2 +-
 drivers/md/dm-verity-fec.c                         |  18 +-
 drivers/md/dm-verity-fec.h                         |   4 +
 drivers/mmc/host/sdhci-msm.c                       |   4 +-
 drivers/mmc/host/sdhci-of-esdhc.c                  |  18 +-
 drivers/net/ethernet/amd/xgbe/Makefile             |   3 +-
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c           |  58 +-
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c           |   6 +-
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c       |  19 +-
 drivers/net/ethernet/amd/xgbe/xgbe-main.c          | 214 ++----
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c          | 549 +++++---------
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c        | 821 +++++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe.h               | 130 ++--
 drivers/net/ethernet/mellanox/mlx4/main.c          |  84 ++-
 .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c |   8 +-
 drivers/nvme/host/core.c                           |  17 +-
 drivers/nvme/host/nvme.h                           |   1 -
 drivers/pci/ecam.c                                 |  12 +
 drivers/pci/host/Kconfig                           |  10 +-
 drivers/pci/host/Makefile                          |  19 +-
 drivers/pci/host/pci-thunder-ecam.c                |   9 +-
 drivers/pci/host/pci-thunder-pem.c                 |  94 ++-
 drivers/pci/host/pci-xgene.c                       | 123 ++-
 drivers/pci/host/pcie-hisi.c                       | 101 +++
 drivers/pci/quirks.c                               | 101 ++-
 drivers/platform/x86/acer-wmi.c                    |  56 ++
 drivers/platform/x86/asus-nb-wmi.c                 |  13 +
 drivers/platform/x86/asus-wmi.c                    |  52 +-
 drivers/platform/x86/asus-wmi.h                    |   1 +
 drivers/scsi/ufs/ufs-qcom.c                        |  30 +
 drivers/scsi/ufs/ufs-qcom.h                        |   1 +
 drivers/scsi/ufs/ufs_quirks.h                      |  35 +-
 drivers/scsi/ufs/ufshcd.c                          | 154 +++-
 drivers/scsi/ufs/ufshcd.h                          |  15 +
 drivers/scsi/ufs/unipro.h                          |   4 +
 drivers/staging/android/ashmem.c                   |   1 +
 drivers/tty/serial/8250/8250_omap.c                |   9 +-
 drivers/usb/chipidea/ci_hdrc_msm.c                 |   4 +-
 drivers/usb/dwc3/gadget.c                          |  21 +-
 drivers/usb/dwc3/host.c                            |  21 +-
 drivers/usb/host/xhci-hub.c                        |   6 +
 drivers/usb/host/xhci-plat.c                       |   3 +
 drivers/usb/host/xhci.h                            |   3 +
 drivers/usb/musb/da8xx.c                           |   2 +-
 drivers/usb/storage/unusual_devs.h                 |  14 +
 drivers/watchdog/s3c2410_wdt.c                     |  21 +-
 fs/cifs/smb2pdu.c                                  |   4 +
 fs/orangefs/super.c                                |   9 +-
 fs/sysfs/file.c                                    |   6 +-
 fs/xfs/xfs_bmap_util.c                             |  10 +-
 include/drm/i915_pciids.h                          |  11 +-
 include/drm/ttm/ttm_object.h                       |   5 +-
 include/linux/arm-smccc.h                          |  52 +-
 include/linux/pci-acpi.h                           |   4 +-
 include/linux/pci-ecam.h                           |   9 +
 include/linux/pci_ids.h                            |   2 +
 include/linux/random.h                             |   1 -
 init/main.c                                        |   1 -
 kernel/ptrace.c                                    |  14 +-
 kernel/trace/ring_buffer.c                         |   8 +-
 mm/mempolicy.c                                     |  20 +-
 mm/page_alloc.c                                    |   2 +-
 net/mac80211/iface.c                               |   3 +-
 net/sunrpc/auth_gss/svcauth_gss.c                  |   2 +-
 net/sunrpc/svc.c                                   |  14 +-
 net/wireless/sysfs.c                               |  10 +-
 sound/soc/codecs/rt5670.c                          |   2 +
 sound/soc/intel/atom/sst/sst_acpi.c                |  37 +-
 sound/soc/intel/boards/bytcr_rt5640.c              |  21 +-
 sound/soc/intel/boards/cht_bsw_rt5645.c            |  98 ++-
 sound/soc/sunxi/sun4i-i2s.c                        |  57 +-
 sound/usb/pcm.c                                    |  10 +
 sound/usb/quirks.c                                 |  38 +
 tools/power/x86/turbostat/turbostat.c              | 103 +++
 159 files changed, 4059 insertions(+), 1491 deletions(-)

[PATCH 4.9 001/152] ppdev: check before attaching port

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

commit dd5c472a60e43549d789a17a8444513eec64bd7e upstream.

After parport starts using the device model, all pardevice drivers
should decide in their match_port callback function if they want to
attach with that particulatr port. ppdev has been converted to use the
new parport device-model code but pp_attach() tried to attach with all
the ports.
Create a new array of pointer and use that to remember the ports we
have attached. And use that information to skip attaching ports which
we have already attached.

Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ppdev.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -86,6 +86,9 @@ struct pp_struct {
 	long default_inactivity;
 };
 
+/* should we use PARDEVICE_MAX here? */
+static struct device *devices[PARPORT_MAX];
+
 /* pp_struct.flags bitfields */
 #define PP_CLAIMED    (1<<0)
 #define PP_EXCL       (1<<1)
@@ -789,13 +792,29 @@ static const struct file_operations pp_f
 
 static void pp_attach(struct parport *port)
 {
-	device_create(ppdev_class, port->dev, MKDEV(PP_MAJOR, port->number),
-		      NULL, "parport%d", port->number);
+	struct device *ret;
+
+	if (devices[port->number])
+		return;
+
+	ret = device_create(ppdev_class, port->dev,
+			    MKDEV(PP_MAJOR, port->number), NULL,
+			    "parport%d", port->number);
+	if (IS_ERR(ret)) {
+		pr_err("Failed to create device parport%d\n",
+		       port->number);
+		return;
+	}
+	devices[port->number] = ret;
 }
 
 static void pp_detach(struct parport *port)
 {
+	if (!devices[port->number])
+		return;
+
 	device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number));
+	devices[port->number] = NULL;
 }
 
 static int pp_probe(struct pardevice *par_dev)

[PATCH 4.9 002/152] ppdev: fix registering same device name

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

commit 9a69645dde1188723d80745c1bc6ee9af2cbe2a7 upstream.

Usually every parallel port will have a single pardev registered with
it. But ppdev driver is an exception. This userspace parallel port
driver allows to create multiple parrallel port devices for a single
parallel port. And as a result we were having a big warning like:
"sysfs: cannot create duplicate filename '/devices/parport0/ppdev0.0'".
And with that many parallel port printers stopped working.

We have been using the minor number as the id field while registering
a parralel port device with a parralel port. But when there are
multiple parrallel port device for one single parallel port, they all
tried to register with the same name like 'pardev0.0' and everything
started failing.
Use an incremented index as the id instead of the minor number.

Fixes: 8b7d3a9d903e ("ppdev: use new parport device model")
Cc: stable <stable@vger.kernel.org> # v4.9+
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656
Bugzilla: https://bugs.archlinux.org/task/52322
Tested-by: James Feeney <james@nurealm.net>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/char/ppdev.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/char/ppdev.c
+++ b/drivers/char/ppdev.c
@@ -84,11 +84,14 @@ struct pp_struct {
 	struct ieee1284_info state;
 	struct ieee1284_info saved_state;
 	long default_inactivity;
+	int index;
 };
 
 /* should we use PARDEVICE_MAX here? */
 static struct device *devices[PARPORT_MAX];
 
+static DEFINE_IDA(ida_index);
+
 /* pp_struct.flags bitfields */
 #define PP_CLAIMED    (1<<0)
 #define PP_EXCL       (1<<1)
@@ -290,6 +293,7 @@ static int register_device(int minor, st
 	struct pardevice *pdev = NULL;
 	char *name;
 	struct pardev_cb ppdev_cb;
+	int index;
 
 	name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor);
 	if (name == NULL)
@@ -302,20 +306,23 @@ static int register_device(int minor, st
 		return -ENXIO;
 	}
 
+	index = ida_simple_get(&ida_index, 0, 0, GFP_KERNEL);
 	memset(&ppdev_cb, 0, sizeof(ppdev_cb));
 	ppdev_cb.irq_func = pp_irq;
 	ppdev_cb.flags = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0;
 	ppdev_cb.private = pp;
-	pdev = parport_register_dev_model(port, name, &ppdev_cb, minor);
+	pdev = parport_register_dev_model(port, name, &ppdev_cb, index);
 	parport_put_port(port);
 
 	if (!pdev) {
 		printk(KERN_WARNING "%s: failed to register device!\n", name);
+		ida_simple_remove(&ida_index, index);
 		kfree(name);
 		return -ENXIO;
 	}
 
 	pp->pdev = pdev;
+	pp->index = index;
 	dev_dbg(&pdev->dev, "registered pardevice\n");
 	return 0;
 }
@@ -752,6 +759,7 @@ static int pp_release(struct inode *inod
 
 	if (pp->pdev) {
 		parport_unregister_device(pp->pdev);
+		ida_simple_remove(&ida_index, pp->index);
 		pp->pdev = NULL;
 		pr_debug(CHRDEV "%x: unregistered pardevice\n", minor);
 	}

[PATCH 4.9 003/152] drm/vmwgfx: Type-check lookups of fence objects

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit f7652afa8eadb416b23eb57dec6f158529942041 upstream.

A malicious caller could otherwise hand over handles to other objects
causing all sorts of interesting problems.

Testing done: Ran a Fedora 25 desktop using both Xorg and
gnome-shell/Wayland.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c |   75 ++++++++++++++++++++++------------
 1 file changed, 49 insertions(+), 26 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -538,7 +538,7 @@ int vmw_fence_create(struct vmw_fence_ma
 		     struct vmw_fence_obj **p_fence)
 {
 	struct vmw_fence_obj *fence;
-	int ret;
+ 	int ret;
 
 	fence = kzalloc(sizeof(*fence), GFP_KERNEL);
 	if (unlikely(fence == NULL))
@@ -701,6 +701,41 @@ void vmw_fence_fifo_up(struct vmw_fence_
 }
 
 
+/**
+ * vmw_fence_obj_lookup - Look up a user-space fence object
+ *
+ * @tfile: A struct ttm_object_file identifying the caller.
+ * @handle: A handle identifying the fence object.
+ * @return: A struct vmw_user_fence base ttm object on success or
+ * an error pointer on failure.
+ *
+ * The fence object is looked up and type-checked. The caller needs
+ * to have opened the fence object first, but since that happens on
+ * creation and fence objects aren't shareable, that's not an
+ * issue currently.
+ */
+static struct ttm_base_object *
+vmw_fence_obj_lookup(struct ttm_object_file *tfile, u32 handle)
+{
+	struct ttm_base_object *base = ttm_base_object_lookup(tfile, handle);
+
+	if (!base) {
+		pr_err("Invalid fence object handle 0x%08lx.\n",
+		       (unsigned long)handle);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (base->refcount_release != vmw_user_fence_base_release) {
+		pr_err("Invalid fence object handle 0x%08lx.\n",
+		       (unsigned long)handle);
+		ttm_base_object_unref(&base);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return base;
+}
+
+
 int vmw_fence_obj_wait_ioctl(struct drm_device *dev, void *data,
 			     struct drm_file *file_priv)
 {
@@ -726,13 +761,9 @@ int vmw_fence_obj_wait_ioctl(struct drm_
 		arg->kernel_cookie = jiffies + wait_timeout;
 	}
 
-	base = ttm_base_object_lookup(tfile, arg->handle);
-	if (unlikely(base == NULL)) {
-		printk(KERN_ERR "Wait invalid fence object handle "
-		       "0x%08lx.\n",
-		       (unsigned long)arg->handle);
-		return -EINVAL;
-	}
+	base = vmw_fence_obj_lookup(tfile, arg->handle);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	fence = &(container_of(base, struct vmw_user_fence, base)->fence);
 
@@ -771,13 +802,9 @@ int vmw_fence_obj_signaled_ioctl(struct
 	struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
 	struct vmw_private *dev_priv = vmw_priv(dev);
 
-	base = ttm_base_object_lookup(tfile, arg->handle);
-	if (unlikely(base == NULL)) {
-		printk(KERN_ERR "Fence signaled invalid fence object handle "
-		       "0x%08lx.\n",
-		       (unsigned long)arg->handle);
-		return -EINVAL;
-	}
+	base = vmw_fence_obj_lookup(tfile, arg->handle);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	fence = &(container_of(base, struct vmw_user_fence, base)->fence);
 	fman = fman_from_fence(fence);
@@ -1024,6 +1051,7 @@ int vmw_fence_event_ioctl(struct drm_dev
 		(struct drm_vmw_fence_event_arg *) data;
 	struct vmw_fence_obj *fence = NULL;
 	struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
+	struct ttm_object_file *tfile = vmw_fp->tfile;
 	struct drm_vmw_fence_rep __user *user_fence_rep =
 		(struct drm_vmw_fence_rep __user *)(unsigned long)
 		arg->fence_rep;
@@ -1037,15 +1065,11 @@ int vmw_fence_event_ioctl(struct drm_dev
 	 */
 	if (arg->handle) {
 		struct ttm_base_object *base =
-			ttm_base_object_lookup_for_ref(dev_priv->tdev,
-						       arg->handle);
+			vmw_fence_obj_lookup(tfile, arg->handle);
+
+		if (IS_ERR(base))
+			return PTR_ERR(base);
 
-		if (unlikely(base == NULL)) {
-			DRM_ERROR("Fence event invalid fence object handle "
-				  "0x%08lx.\n",
-				  (unsigned long)arg->handle);
-			return -EINVAL;
-		}
 		fence = &(container_of(base, struct vmw_user_fence,
 				       base)->fence);
 		(void) vmw_fence_obj_reference(fence);
@@ -1053,7 +1077,7 @@ int vmw_fence_event_ioctl(struct drm_dev
 		if (user_fence_rep != NULL) {
 			bool existed;
 
-			ret = ttm_ref_object_add(vmw_fp->tfile, base,
+			ret = ttm_ref_object_add(tfile, base,
 						 TTM_REF_USAGE, &existed);
 			if (unlikely(ret != 0)) {
 				DRM_ERROR("Failed to reference a fence "
@@ -1097,8 +1121,7 @@ int vmw_fence_event_ioctl(struct drm_dev
 	return 0;
 out_no_create:
 	if (user_fence_rep != NULL)
-		ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile,
-					  handle, TTM_REF_USAGE);
+		ttm_ref_object_base_unref(tfile, handle, TTM_REF_USAGE);
 out_no_ref_obj:
 	vmw_fence_obj_unreference(&fence);
 	return ret;

[PATCH 4.9 004/152] drm/vmwgfx: NULL pointer dereference in vmw_surface_define_ioctl()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murray McAllister <murray.mcallister@insomniasec.com>

commit 36274ab8c596f1240c606bb514da329add2a1bcd upstream.

Before memory allocations vmw_surface_define_ioctl() checks the
upper-bounds of a user-supplied size, but does not check if the
supplied size is 0.

Add check to avoid NULL pointer dereferences.

Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -716,8 +716,8 @@ int vmw_surface_define_ioctl(struct drm_
 	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
 		num_sizes += req->mip_levels[i];
 
-	if (num_sizes > DRM_VMW_MAX_SURFACE_FACES *
-	    DRM_VMW_MAX_MIP_LEVELS)
+	if (num_sizes > DRM_VMW_MAX_SURFACE_FACES * DRM_VMW_MAX_MIP_LEVELS ||
+	    num_sizes == 0)
 		return -EINVAL;
 
 	size = vmw_user_surface_size + 128 +

[PATCH 4.9 005/152] drm/vmwgfx: avoid calling vzalloc with a 0 size in vmw_get_cap_3d_ioctl()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Murray McAllister <murray.mcallister@insomniasec.com>

commit 63774069d9527a1aeaa4aa20e929ef5e8e9ecc38 upstream.

In vmw_get_cap_3d_ioctl(), a user can supply 0 for a size that is
used in vzalloc(). This eventually calls dump_stack() (in warn_alloc()),
which can leak useful addresses to dmesg.

Add check to avoid a size of 0.

Signed-off-by: Murray McAllister <murray.mcallister@insomniasec.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -186,7 +186,7 @@ int vmw_get_cap_3d_ioctl(struct drm_devi
 	bool gb_objects = !!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS);
 	struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
 
-	if (unlikely(arg->pad64 != 0)) {
+	if (unlikely(arg->pad64 != 0 || arg->max_size == 0)) {
 		DRM_ERROR("Illegal GET_3D_CAP argument.\n");
 		return -EINVAL;
 	}

[PATCH 4.9 006/152] drm/ttm, drm/vmwgfx: Relax permission checking when opening surfaces

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit fe25deb7737ce6c0879ccf79c99fa1221d428bf2 upstream.

Previously, when a surface was opened using a legacy (non prime) handle,
it was verified to have been created by a client in the same master realm.
Relax this so that opening is also allowed recursively if the client
already has the surface open.

This works around a regression in svga mesa where opening of a shared
surface is used recursively to obtain surface information.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/ttm/ttm_object.c         |   10 +++++++---
 drivers/gpu/drm/vmwgfx/vmwgfx_fence.c    |    6 ++----
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c |    4 ++--
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c  |   22 +++++++++-------------
 include/drm/ttm/ttm_object.h             |    5 ++++-
 5 files changed, 24 insertions(+), 23 deletions(-)

--- a/drivers/gpu/drm/ttm/ttm_object.c
+++ b/drivers/gpu/drm/ttm/ttm_object.c
@@ -179,7 +179,7 @@ int ttm_base_object_init(struct ttm_obje
 	if (unlikely(ret != 0))
 		goto out_err0;
 
-	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL, false);
 	if (unlikely(ret != 0))
 		goto out_err1;
 
@@ -318,7 +318,8 @@ EXPORT_SYMBOL(ttm_ref_object_exists);
 
 int ttm_ref_object_add(struct ttm_object_file *tfile,
 		       struct ttm_base_object *base,
-		       enum ttm_ref_type ref_type, bool *existed)
+		       enum ttm_ref_type ref_type, bool *existed,
+		       bool require_existed)
 {
 	struct drm_open_hash *ht = &tfile->ref_hash[ref_type];
 	struct ttm_ref_object *ref;
@@ -345,6 +346,9 @@ int ttm_ref_object_add(struct ttm_object
 		}
 
 		rcu_read_unlock();
+		if (require_existed)
+			return -EPERM;
+
 		ret = ttm_mem_global_alloc(mem_glob, sizeof(*ref),
 					   false, false);
 		if (unlikely(ret != 0))
@@ -635,7 +639,7 @@ int ttm_prime_fd_to_handle(struct ttm_ob
 	prime = (struct ttm_prime_object *) dma_buf->priv;
 	base = &prime->base;
 	*handle = base->hash.key;
-	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+	ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL, false);
 
 	dma_buf_put(dma_buf);
 
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fence.c
@@ -1075,10 +1075,8 @@ int vmw_fence_event_ioctl(struct drm_dev
 		(void) vmw_fence_obj_reference(fence);
 
 		if (user_fence_rep != NULL) {
-			bool existed;
-
-			ret = ttm_ref_object_add(tfile, base,
-						 TTM_REF_USAGE, &existed);
+			ret = ttm_ref_object_add(vmw_fp->tfile, base,
+						 TTM_REF_USAGE, NULL, false);
 			if (unlikely(ret != 0)) {
 				DRM_ERROR("Failed to reference a fence "
 					  "object.\n");
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -589,7 +589,7 @@ static int vmw_user_dmabuf_synccpu_grab(
 		return ret;
 
 	ret = ttm_ref_object_add(tfile, &user_bo->prime.base,
-				 TTM_REF_SYNCCPU_WRITE, &existed);
+				 TTM_REF_SYNCCPU_WRITE, &existed, false);
 	if (ret != 0 || existed)
 		ttm_bo_synccpu_write_release(&user_bo->dma.base);
 
@@ -773,7 +773,7 @@ int vmw_user_dmabuf_reference(struct ttm
 
 	*handle = user_bo->prime.base.hash.key;
 	return ttm_ref_object_add(tfile, &user_bo->prime.base,
-				  TTM_REF_USAGE, NULL);
+				  TTM_REF_USAGE, NULL, false);
 }
 
 /*
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -891,17 +891,16 @@ vmw_surface_handle_reference(struct vmw_
 	uint32_t handle;
 	struct ttm_base_object *base;
 	int ret;
+	bool require_exist = false;
 
 	if (handle_type == DRM_VMW_HANDLE_PRIME) {
 		ret = ttm_prime_fd_to_handle(tfile, u_handle, &handle);
 		if (unlikely(ret != 0))
 			return ret;
 	} else {
-		if (unlikely(drm_is_render_client(file_priv))) {
-			DRM_ERROR("Render client refused legacy "
-				  "surface reference.\n");
-			return -EACCES;
-		}
+		if (unlikely(drm_is_render_client(file_priv)))
+			require_exist = true;
+
 		if (ACCESS_ONCE(vmw_fpriv(file_priv)->locked_master)) {
 			DRM_ERROR("Locked master refused legacy "
 				  "surface reference.\n");
@@ -929,17 +928,14 @@ vmw_surface_handle_reference(struct vmw_
 
 		/*
 		 * Make sure the surface creator has the same
-		 * authenticating master.
+		 * authenticating master, or is already registered with us.
 		 */
 		if (drm_is_primary_client(file_priv) &&
-		    user_srf->master != file_priv->master) {
-			DRM_ERROR("Trying to reference surface outside of"
-				  " master domain.\n");
-			ret = -EACCES;
-			goto out_bad_resource;
-		}
+		    user_srf->master != file_priv->master)
+			require_exist = true;
 
-		ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL);
+		ret = ttm_ref_object_add(tfile, base, TTM_REF_USAGE, NULL,
+					 require_exist);
 		if (unlikely(ret != 0)) {
 			DRM_ERROR("Could not add a reference to a surface.\n");
 			goto out_bad_resource;
--- a/include/drm/ttm/ttm_object.h
+++ b/include/drm/ttm/ttm_object.h
@@ -229,6 +229,8 @@ extern void ttm_base_object_unref(struct
  * @ref_type: The type of reference.
  * @existed: Upon completion, indicates that an identical reference object
  * already existed, and the refcount was upped on that object instead.
+ * @require_existed: Fail with -EPERM if an identical ref object didn't
+ * already exist.
  *
  * Checks that the base object is shareable and adds a ref object to it.
  *
@@ -243,7 +245,8 @@ extern void ttm_base_object_unref(struct
  */
 extern int ttm_ref_object_add(struct ttm_object_file *tfile,
 			      struct ttm_base_object *base,
-			      enum ttm_ref_type ref_type, bool *existed);
+			      enum ttm_ref_type ref_type, bool *existed,
+			      bool require_existed);
 
 extern bool ttm_ref_object_exists(struct ttm_object_file *tfile,
 				  struct ttm_base_object *base);

[PATCH 4.9 007/152] drm/vmwgfx: Remove getparam error message

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 53e16798b0864464c5444a204e1bb93ae246c429 upstream.

The mesa winsys sometimes uses unimplemented parameter requests to
check for features. Remove the error message to avoid bloating the
kernel log.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
@@ -114,8 +114,6 @@ int vmw_getparam_ioctl(struct drm_device
 		param->value = dev_priv->has_dx;
 		break;
 	default:
-		DRM_ERROR("Illegal vmwgfx get param request: %d\n",
-			  param->param);
 		return -EINVAL;
 	}
 

[PATCH 4.9 008/152] drm/vmwgfx: fix integer overflow in vmw_surface_define_ioctl()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Qiang <liq3ea@gmail.com>

commit e7e11f99564222d82f0ce84bd521e57d78a6b678 upstream.

In vmw_surface_define_ioctl(), the 'num_sizes' is the sum of the
'req->mip_levels' array. This array can be assigned any value from
the user space. As both the 'num_sizes' and the array is uint32_t,
it is easy to make 'num_sizes' overflow. The later 'mip_levels' is
used as the loop count. This can lead an oob write. Add the check of
'req->mip_levels' to avoid this.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_surface.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_surface.c
@@ -713,8 +713,11 @@ int vmw_surface_define_ioctl(struct drm_
 			128;
 
 	num_sizes = 0;
-	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i)
+	for (i = 0; i < DRM_VMW_MAX_SURFACE_FACES; ++i) {
+		if (req->mip_levels[i] > DRM_VMW_MAX_MIP_LEVELS)
+			return -EINVAL;
 		num_sizes += req->mip_levels[i];
+	}
 
 	if (num_sizes > DRM_VMW_MAX_SURFACE_FACES * DRM_VMW_MAX_MIP_LEVELS ||
 	    num_sizes == 0)

[PATCH 4.9 009/152] sysfs: be careful of error returns from ops->show()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit c8a139d001a1aab1ea8734db14b22dac9dd143b6 upstream.

ops->show() can return a negative error code.
Commit 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
(in v4.4) caused this to be stored in an unsigned 'size_t' variable, so errors
would look like large numbers.
As a result, if an error is returned, sysfs_kf_read() will return the
value of 'count', typically 4096.

Commit 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
(in v4.8) extended this error to use the unsigned large 'len' as a size for
memmove().
Consequently, if ->show returns an error, then the first read() on the
sysfs file will return 4096 and could return uninitialized memory to
user-space.
If the application performs a subsequent read, this will trigger a memmove()
with extremely large count, and is likely to crash the machine is bizarre ways.

This bug can currently only be triggered by reading from an md
sysfs attribute declared with __ATTR_PREALLOC() during the
brief period between when mddev_put() deletes an mddev from
the ->all_mddevs list, and when mddev_delayed_delete() - which is
scheduled on a workqueue - completes.
Before this, an error won't be returned by the ->show()
After this, the ->show() won't be called.

I can reproduce it reliably only by putting delay like
	usleep_range(500000,700000);
early in mddev_delayed_delete(). Then after creating an
md device md0 run
  echo clear > /sys/block/md0/md/array_state; cat /sys/block/md0/md/array_state

The bug can be triggered without the usleep.

Fixes: 65da3484d9be ("sysfs: correctly handle short reads on PREALLOC attrs.")
Fixes: 17d0774f8068 ("sysfs: correctly handle read offset on PREALLOC attrs")
Signed-off-by: NeilBrown <neilb@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/sysfs/file.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -108,7 +108,7 @@ static ssize_t sysfs_kf_read(struct kern
 {
 	const struct sysfs_ops *ops = sysfs_file_ops(of->kn);
 	struct kobject *kobj = of->kn->parent->priv;
-	size_t len;
+	ssize_t len;
 
 	/*
 	 * If buf != of->prealloc_buf, we don't know how
@@ -117,13 +117,15 @@ static ssize_t sysfs_kf_read(struct kern
 	if (WARN_ON_ONCE(buf != of->prealloc_buf))
 		return 0;
 	len = ops->show(kobj, of->kn->priv, buf);
+	if (len < 0)
+		return len;
 	if (pos) {
 		if (len <= pos)
 			return 0;
 		len -= pos;
 		memmove(buf, buf + pos, len);
 	}
-	return min(count, len);
+	return min_t(ssize_t, count, len);
 }
 
 /* kernfs write callback for regular sysfs files */

[PATCH 4.9 010/152] staging: android: ashmem: lseek failed due to no FMODE_LSEEK.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuxiao Zhang <zhangshuxiao@xiaomi.com>

commit 97fbfef6bd597888485b653175fb846c6998b60c upstream.

vfs_llseek will check whether the file mode has
FMODE_LSEEK, no return failure. But ashmem can be
lseek, so add FMODE_LSEEK to ashmem file.

Comment From Greg Hackmann:
	ashmem_llseek() passes the llseek() call through to the backing
	shmem file.  91360b02ab48 ("ashmem: use vfs_llseek()") changed
	this from directly calling the file's llseek() op into a VFS
	layer call.  This also adds a check for the FMODE_LSEEK bit, so
	without that bit ashmem_llseek() now always fails with -ESPIPE.

Fixes: 91360b02ab48 ("ashmem: use vfs_llseek()")
Signed-off-by: Shuxiao Zhang <zhangshuxiao@xiaomi.com>
Tested-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/android/ashmem.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/staging/android/ashmem.c
+++ b/drivers/staging/android/ashmem.c
@@ -405,6 +405,7 @@ static int ashmem_mmap(struct file *file
 			ret = PTR_ERR(vmfile);
 			goto out;
 		}
+		vmfile->f_mode |= FMODE_LSEEK;
 		asma->file = vmfile;
 	}
 	get_file(asma->file);

[PATCH 4.9 011/152] arm/arm64: KVM: Take mmap_sem in stage2_unmap_vm

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 90f6e150e44a0dc3883110eeb3ab35d1be42b6bb upstream.

We don't hold the mmap_sem while searching for the VMAs when
we try to unmap each memslot for a VM. Fix this properly to
avoid unexpected results.

Fixes: commit 957db105c997 ("arm/arm64: KVM: Introduce stage2_unmap_vm")
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/mmu.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -803,6 +803,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 	int idx;
 
 	idx = srcu_read_lock(&kvm->srcu);
+	down_read(&current->mm->mmap_sem);
 	spin_lock(&kvm->mmu_lock);
 
 	slots = kvm_memslots(kvm);
@@ -810,6 +811,7 @@ void stage2_unmap_vm(struct kvm *kvm)
 		stage2_unmap_memslot(kvm, memslot);
 
 	spin_unlock(&kvm->mmu_lock);
+	up_read(&current->mm->mmap_sem);
 	srcu_read_unlock(&kvm->srcu, idx);
 }
 

[PATCH 4.9 012/152] arm/arm64: KVM: Take mmap_sem in kvm_arch_prepare_memory_region

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 72f310481a08db821b614e7b5d00febcc9064b36 upstream.

We don't hold the mmap_sem while searching for VMAs (via find_vma), in
kvm_arch_prepare_memory_region, which can end up in expected failures.

Fixes: commit 8eef91239e57 ("arm/arm64: KVM: map MMIO regions at creation time")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Auger <eric.auger@rehat.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
[ Handle dirty page logging failure case ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/mmu.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -1806,6 +1806,7 @@ int kvm_arch_prepare_memory_region(struc
 	    (KVM_PHYS_SIZE >> PAGE_SHIFT))
 		return -EFAULT;
 
+	down_read(&current->mm->mmap_sem);
 	/*
 	 * A memory region could potentially cover multiple VMAs, and any holes
 	 * between them, so iterate over all of them to find out if we can map
@@ -1849,8 +1850,10 @@ int kvm_arch_prepare_memory_region(struc
 			pa += vm_start - vma->vm_start;
 
 			/* IO region dirty page logging not allowed */
-			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES)
-				return -EINVAL;
+			if (memslot->flags & KVM_MEM_LOG_DIRTY_PAGES) {
+				ret = -EINVAL;
+				goto out;
+			}
 
 			ret = kvm_phys_addr_ioremap(kvm, gpa, pa,
 						    vm_end - vm_start,
@@ -1862,7 +1865,7 @@ int kvm_arch_prepare_memory_region(struc
 	} while (hva < reg_end);
 
 	if (change == KVM_MR_FLAGS_ONLY)
-		return ret;
+		goto out;
 
 	spin_lock(&kvm->mmu_lock);
 	if (ret)
@@ -1870,6 +1873,8 @@ int kvm_arch_prepare_memory_region(struc
 	else
 		stage2_flush_memslot(kvm, memslot);
 	spin_unlock(&kvm->mmu_lock);
+out:
+	up_read(&current->mm->mmap_sem);
 	return ret;
 }
 

[PATCH 4.9 013/152] kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suzuki K Poulose <suzuki.poulose@arm.com>

commit 8b3405e345b5a098101b0c31b264c812bba045d9 upstream.

In kvm_free_stage2_pgd() we don't hold the kvm->mmu_lock while calling
unmap_stage2_range() on the entire memory range for the guest. This could
cause problems with other callers (e.g, munmap on a memslot) trying to
unmap a range. And since we have to unmap the entire Guest memory range
holding a spinlock, make sure we yield the lock if necessary, after we
unmap each PUD range.

Fixes: commit d5d8184d35c9 ("KVM: ARM: Memory virtualization setup")
Cc: Paolo Bonzini <pbonzin@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[ Avoid vCPU starvation and lockup detector warnings ]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/kvm/mmu.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/arch/arm/kvm/mmu.c
+++ b/arch/arm/kvm/mmu.c
@@ -292,11 +292,18 @@ static void unmap_stage2_range(struct kv
 	phys_addr_t addr = start, end = start + size;
 	phys_addr_t next;
 
+	assert_spin_locked(&kvm->mmu_lock);
 	pgd = kvm->arch.pgd + stage2_pgd_index(addr);
 	do {
 		next = stage2_pgd_addr_end(addr, end);
 		if (!stage2_pgd_none(*pgd))
 			unmap_stage2_puds(kvm, pgd, addr, next);
+		/*
+		 * If the range is too large, release the kvm->mmu_lock
+		 * to prevent starvation and lockup detector warnings.
+		 */
+		if (next != end)
+			cond_resched_lock(&kvm->mmu_lock);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -831,7 +838,10 @@ void kvm_free_stage2_pgd(struct kvm *kvm
 	if (kvm->arch.pgd == NULL)
 		return;
 
+	spin_lock(&kvm->mmu_lock);
 	unmap_stage2_range(kvm, 0, KVM_PHYS_SIZE);
+	spin_unlock(&kvm->mmu_lock);
+
 	/* Free the HW pgd, one page at a time */
 	free_pages_exact(kvm->arch.pgd, S2_PGD_SIZE);
 	kvm->arch.pgd = NULL;

[PATCH 4.9 014/152] iio: bmg160: reset chip when probing

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Quentin Schulz <quentin.schulz@free-electrons.com>

commit 4bdc9029685ac03be50b320b29691766d2326c2b upstream.

The gyroscope chip might need to be reset to be used.

Without the chip being reset, the driver stopped at the first
regmap_read (to get the CHIP_ID) and failed to probe.

The datasheet of the gyroscope says that a minimum wait of 30ms after
the reset has to be done.

This patch has been checked on a BMX055 and the datasheet of the BMG160
and the BMI055 give the same reset register and bits.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/gyro/bmg160_core.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/iio/gyro/bmg160_core.c
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -27,6 +27,7 @@
 #include <linux/iio/trigger_consumer.h>
 #include <linux/iio/triggered_buffer.h>
 #include <linux/regmap.h>
+#include <linux/delay.h>
 #include "bmg160.h"
 
 #define BMG160_IRQ_NAME		"bmg160_event"
@@ -52,6 +53,9 @@
 #define BMG160_DEF_BW			100
 #define BMG160_REG_PMU_BW_RES		BIT(7)
 
+#define BMG160_GYRO_REG_RESET		0x14
+#define BMG160_GYRO_RESET_VAL		0xb6
+
 #define BMG160_REG_INT_MAP_0		0x17
 #define BMG160_INT_MAP_0_BIT_ANY	BIT(1)
 
@@ -236,6 +240,14 @@ static int bmg160_chip_init(struct bmg16
 	int ret;
 	unsigned int val;
 
+	/*
+	 * Reset chip to get it in a known good state. A delay of 30ms after
+	 * reset is required according to the datasheet.
+	 */
+	regmap_write(data->regmap, BMG160_GYRO_REG_RESET,
+		     BMG160_GYRO_RESET_VAL);
+	usleep_range(30000, 30700);
+
 	ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
 	if (ret < 0) {
 		dev_err(dev, "Error reading reg_chip_id\n");

[PATCH 4.9 015/152] arm64: mm: unaligned access by user-land should be received as SIGBUS

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Victor Kamensky <kamensky@cisco.com>

commit 09a6adf53d42ca3088fa3fb41f40b768efc711ed upstream.

After 52d7523 (arm64: mm: allow the kernel to handle alignment faults on
user accesses) commit user-land accesses that produce unaligned exceptions
like in case of aarch32 ldm/stm/ldrd/strd instructions operating on
unaligned memory received by user-land as SIGSEGV. It is wrong, it should
be reported as SIGBUS as it was before 52d7523 commit.

Changed do_bad_area function to take signal and code parameters out of esr
value using fault_info table, so in case of do_alignment_fault fault
user-land will receive SIGBUS. Wrapped access to fault_info table into
esr_to_fault_info function.

Fixes: 52d7523 (arm64: mm: allow the kernel to handle alignment faults on user accesses)
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/fault.c |   42 ++++++++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 18 deletions(-)

--- a/arch/arm64/mm/fault.c
+++ b/arch/arm64/mm/fault.c
@@ -41,7 +41,20 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-static const char *fault_name(unsigned int esr);
+struct fault_info {
+	int	(*fn)(unsigned long addr, unsigned int esr,
+		      struct pt_regs *regs);
+	int	sig;
+	int	code;
+	const char *name;
+};
+
+static const struct fault_info fault_info[];
+
+static inline const struct fault_info *esr_to_fault_info(unsigned int esr)
+{
+	return fault_info + (esr & 63);
+}
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int esr)
@@ -196,10 +209,12 @@ static void __do_user_fault(struct task_
 			    struct pt_regs *regs)
 {
 	struct siginfo si;
+	const struct fault_info *inf;
 
 	if (unhandled_signal(tsk, sig) && show_unhandled_signals_ratelimited()) {
+		inf = esr_to_fault_info(esr);
 		pr_info("%s[%d]: unhandled %s (%d) at 0x%08lx, esr 0x%03x\n",
-			tsk->comm, task_pid_nr(tsk), fault_name(esr), sig,
+			tsk->comm, task_pid_nr(tsk), inf->name, sig,
 			addr, esr);
 		show_pte(tsk->mm, addr);
 		show_regs(regs);
@@ -218,14 +233,16 @@ static void do_bad_area(unsigned long ad
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->active_mm;
+	const struct fault_info *inf;
 
 	/*
 	 * If we are in kernel mode at this point, we have no context to
 	 * handle this fault with.
 	 */
-	if (user_mode(regs))
-		__do_user_fault(tsk, addr, esr, SIGSEGV, SEGV_MAPERR, regs);
-	else
+	if (user_mode(regs)) {
+		inf = esr_to_fault_info(esr);
+		__do_user_fault(tsk, addr, esr, inf->sig, inf->code, regs);
+	} else
 		__do_kernel_fault(mm, addr, esr, regs);
 }
 
@@ -481,12 +498,7 @@ static int do_bad(unsigned long addr, un
 	return 1;
 }
 
-static const struct fault_info {
-	int	(*fn)(unsigned long addr, unsigned int esr, struct pt_regs *regs);
-	int	sig;
-	int	code;
-	const char *name;
-} fault_info[] = {
+static const struct fault_info fault_info[] = {
 	{ do_bad,		SIGBUS,  0,		"ttbr address size fault"	},
 	{ do_bad,		SIGBUS,  0,		"level 1 address size fault"	},
 	{ do_bad,		SIGBUS,  0,		"level 2 address size fault"	},
@@ -553,19 +565,13 @@ static const struct fault_info {
 	{ do_bad,		SIGBUS,  0,		"unknown 63"			},
 };
 
-static const char *fault_name(unsigned int esr)
-{
-	const struct fault_info *inf = fault_info + (esr & 63);
-	return inf->name;
-}
-
 /*
  * Dispatch a data abort to the relevant handler.
  */
 asmlinkage void __exception do_mem_abort(unsigned long addr, unsigned int esr,
 					 struct pt_regs *regs)
 {
-	const struct fault_info *inf = fault_info + (esr & 63);
+	const struct fault_info *inf = esr_to_fault_info(esr);
 	struct siginfo info;
 
 	if (!inf->fn(addr, esr, regs))

[PATCH 4.9 016/152] cfg80211: check rdev resume callback only for registered wiphy

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit b3ef5520c1eabb56064474043c7c55a1a65b8708 upstream.

We got the following use-after-free KASAN report:

 BUG: KASAN: use-after-free in wiphy_resume+0x591/0x5a0 [cfg80211]
	 at addr ffff8803fc244090
 Read of size 8 by task kworker/u16:24/2587
 CPU: 6 PID: 2587 Comm: kworker/u16:24 Tainted: G    B 4.9.13-debug+
 Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.2.19 12/22/2016
 Workqueue: events_unbound async_run_entry_fn
  ffff880425d4f9d8 ffffffffaeedb541 ffff88042b80ef00 ffff8803fc244088
  ffff880425d4fa00 ffffffffae84d7a1 ffff880425d4fa98 ffff8803fc244080
  ffff88042b80ef00 ffff880425d4fa88 ffffffffae84da3a ffffffffc141f7d9
 Call Trace:
  [<ffffffffaeedb541>] dump_stack+0x85/0xc4
  [<ffffffffae84d7a1>] kasan_object_err+0x21/0x70
  [<ffffffffae84da3a>] kasan_report_error+0x1fa/0x500
  [<ffffffffc141f7d9>] ? cfg80211_bss_age+0x39/0xc0 [cfg80211]
  [<ffffffffc141f83a>] ? cfg80211_bss_age+0x9a/0xc0 [cfg80211]
  [<ffffffffae48d46d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211]
  [<ffffffffae84def1>] __asan_report_load8_noabort+0x61/0x70
  [<ffffffffc13fb100>] ? wiphy_suspend+0xbb0/0xc70 [cfg80211]
  [<ffffffffc13fb751>] ? wiphy_resume+0x591/0x5a0 [cfg80211]
  [<ffffffffc13fb751>] wiphy_resume+0x591/0x5a0 [cfg80211]
  [<ffffffffc13fb1c0>] ? wiphy_suspend+0xc70/0xc70 [cfg80211]
  [<ffffffffaf3b206e>] dpm_run_callback+0x6e/0x4f0
  [<ffffffffaf3b31b2>] device_resume+0x1c2/0x670
  [<ffffffffaf3b367d>] async_resume+0x1d/0x50
  [<ffffffffae3ee84e>] async_run_entry_fn+0xfe/0x610
  [<ffffffffae3d0666>] process_one_work+0x716/0x1a50
  [<ffffffffae3d05c9>] ? process_one_work+0x679/0x1a50
  [<ffffffffafdd7b6d>] ? _raw_spin_unlock_irq+0x3d/0x60
  [<ffffffffae3cff50>] ? pwq_dec_nr_in_flight+0x2b0/0x2b0
  [<ffffffffae3d1a80>] worker_thread+0xe0/0x1460
  [<ffffffffae3d19a0>] ? process_one_work+0x1a50/0x1a50
  [<ffffffffae3e54c2>] kthread+0x222/0x2e0
  [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80
  [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80
  [<ffffffffae3e52a0>] ? kthread_park+0x80/0x80
  [<ffffffffafdd86aa>] ret_from_fork+0x2a/0x40
 Object at ffff8803fc244088, in cache kmalloc-1024 size: 1024
 Allocated:
 PID = 71
  save_stack_trace+0x1b/0x20
  save_stack+0x46/0xd0
  kasan_kmalloc+0xad/0xe0
  kasan_slab_alloc+0x12/0x20
  __kmalloc_track_caller+0x134/0x360
  kmemdup+0x20/0x50
  brcmf_cfg80211_attach+0x10b/0x3a90 [brcmfmac]
  brcmf_bus_start+0x19a/0x9a0 [brcmfmac]
  brcmf_pcie_setup+0x1f1a/0x3680 [brcmfmac]
  brcmf_fw_request_nvram_done+0x44c/0x11b0 [brcmfmac]
  request_firmware_work_func+0x135/0x280
  process_one_work+0x716/0x1a50
  worker_thread+0xe0/0x1460
  kthread+0x222/0x2e0
  ret_from_fork+0x2a/0x40
 Freed:
 PID = 2568
  save_stack_trace+0x1b/0x20
  save_stack+0x46/0xd0
  kasan_slab_free+0x71/0xb0
  kfree+0xe8/0x2e0
  brcmf_cfg80211_detach+0x62/0xf0 [brcmfmac]
  brcmf_detach+0x14a/0x2b0 [brcmfmac]
  brcmf_pcie_remove+0x140/0x5d0 [brcmfmac]
  brcmf_pcie_pm_leave_D3+0x198/0x2e0 [brcmfmac]
  pci_pm_resume+0x186/0x220
  dpm_run_callback+0x6e/0x4f0
  device_resume+0x1c2/0x670
  async_resume+0x1d/0x50
  async_run_entry_fn+0xfe/0x610
  process_one_work+0x716/0x1a50
  worker_thread+0xe0/0x1460
  kthread+0x222/0x2e0
  ret_from_fork+0x2a/0x40
 Memory state around the buggy address:
  ffff8803fc243f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff8803fc244000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 >ffff8803fc244080: fc fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                          ^
  ffff8803fc244100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
  ffff8803fc244180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

What is happening is that brcmf_pcie_resume() detects a device that
is no longer responsive and it decides to unbind resulting in a
wiphy_unregister() and wiphy_free() call. Now the wiphy instance
remains allocated, because PM needs to call wiphy_resume() for it.
However, brcmfmac already does a kfree() for the struct
cfg80211_registered_device::ops field. Change the checks in
wiphy_resume() to only access the struct cfg80211_registered_device::ops
if the wiphy instance is still registered at this time.

Reported-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/sysfs.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/net/wireless/sysfs.c
+++ b/net/wireless/sysfs.c
@@ -130,12 +130,10 @@ static int wiphy_resume(struct device *d
 	/* Age scan results with time spent in suspend */
 	cfg80211_bss_age(rdev, get_seconds() - rdev->suspend_at);
 
-	if (rdev->ops->resume) {
-		rtnl_lock();
-		if (rdev->wiphy.registered)
-			ret = rdev_resume(rdev);
-		rtnl_unlock();
-	}
+	rtnl_lock();
+	if (rdev->wiphy.registered && rdev->ops->resume)
+		ret = rdev_resume(rdev);
+	rtnl_unlock();
 
 	return ret;
 }

[PATCH 4.9 017/152] Reset TreeId to zero on SMB2 TREE_CONNECT

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan-Marek Glogowski <glogow@fbihome.de>

commit 806a28efe9b78ffae5e2757e1ee924b8e50c08ab upstream.

Currently the cifs module breaks the CIFS specs on reconnect as
described in http://msdn.microsoft.com/en-us/library/cc246529.aspx:

"TreeId (4 bytes): Uniquely identifies the tree connect for the
command. This MUST be 0 for the SMB2 TREE_CONNECT Request."

Signed-off-by: Jan-Marek Glogowski <glogow@fbihome.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb2pdu.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -1104,6 +1104,10 @@ SMB2_tcon(const unsigned int xid, struct
 		return -EINVAL;
 	}
 
+	/* SMB2 TREE_CONNECT request must be called with TreeId == 0 */
+	if (tcon)
+		tcon->tid = 0;
+
 	rc = small_smb2_init(SMB2_TREE_CONNECT, tcon, (void **) &req);
 	if (rc) {
 		kfree(unc_path);

[PATCH 4.9 018/152] mm/page_alloc.c: fix print order in show_free_areas()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Polakov <apolyakov@beget.ru>

commit 1f06b81aea5ecba2c1f8afd87e0ba1b9f8f90160 upstream.

Fixes: 11fb998986a72a ("mm: move most file-based accounting to the node")
Link: http://lkml.kernel.org/r/1490377730.30219.2.camel@beget.ru
Signed-off-by: Alexander Polyakov <apolyakov@beget.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4345,13 +4345,13 @@ void show_free_areas(unsigned int filter
 			K(node_page_state(pgdat, NR_FILE_MAPPED)),
 			K(node_page_state(pgdat, NR_FILE_DIRTY)),
 			K(node_page_state(pgdat, NR_WRITEBACK)),
+			K(node_page_state(pgdat, NR_SHMEM)),
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 			K(node_page_state(pgdat, NR_SHMEM_THPS) * HPAGE_PMD_NR),
 			K(node_page_state(pgdat, NR_SHMEM_PMDMAPPED)
 					* HPAGE_PMD_NR),
 			K(node_page_state(pgdat, NR_ANON_THPS) * HPAGE_PMD_NR),
 #endif
-			K(node_page_state(pgdat, NR_SHMEM)),
 			K(node_page_state(pgdat, NR_WRITEBACK_TEMP)),
 			K(node_page_state(pgdat, NR_UNSTABLE_NFS)),
 			node_page_state(pgdat, NR_PAGES_SCANNED),

[PATCH 4.9 019/152] ptrace: fix PTRACE_LISTEN race corrupting task->state

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: bsegall@google.com <bsegall@google.com>

commit 5402e97af667e35e54177af8f6575518bf251d51 upstream.

In PT_SEIZED + LISTEN mode STOP/CONT signals cause a wakeup against
__TASK_TRACED.  If this races with the ptrace_unfreeze_traced at the end
of a PTRACE_LISTEN, this can wake the task /after/ the check against
__TASK_TRACED, but before the reset of state to TASK_TRACED.  This
causes it to instead clobber TASK_WAKING, allowing a subsequent wakeup
against TRACED while the task is still on the rq wake_list, corrupting
it.

Oleg said:
 "The kernel can crash or this can lead to other hard-to-debug problems.
  In short, "task->state = TASK_TRACED" in ptrace_unfreeze_traced()
  assumes that nobody else can wake it up, but PTRACE_LISTEN breaks the
  contract. Obviusly it is very wrong to manipulate task->state if this
  task is already running, or WAKING, or it sleeps again"

[akpm@linux-foundation.org: coding-style fixes]
Fixes: 9899d11f ("ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILL")
Link: http://lkml.kernel.org/r/xm26y3vfhmkp.fsf_-_@bsegall-linux.mtv.corp.google.com
Signed-off-by: Ben Segall <bsegall@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/ptrace.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -181,11 +181,17 @@ static void ptrace_unfreeze_traced(struc
 
 	WARN_ON(!task->ptrace || task->parent != current);
 
+	/*
+	 * PTRACE_LISTEN can allow ptrace_trap_notify to wake us up remotely.
+	 * Recheck state under the lock to close this race.
+	 */
 	spin_lock_irq(&task->sighand->siglock);
-	if (__fatal_signal_pending(task))
-		wake_up_state(task, __TASK_TRACED);
-	else
-		task->state = TASK_TRACED;
+	if (task->state == __TASK_TRACED) {
+		if (__fatal_signal_pending(task))
+			wake_up_state(task, __TASK_TRACED);
+		else
+			task->state = TASK_TRACED;
+	}
 	spin_unlock_irq(&task->sighand->siglock);
 }
 

[PATCH 4.9 020/152] dm verity fec: limit error correction recursion

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sami Tolvanen <samitolvanen@google.com>

commit f1a880a93baaadb14c10a348fd199f1cdb6bcccd upstream.

If the hash tree itself is sufficiently corrupt in addition to data blocks,
it's possible for error correction to end up in a deep recursive loop,
which eventually causes a kernel panic.  This change limits the
recursion to a reasonable level during a single I/O operation.

Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-verity-fec.c |   12 +++++++++++-
 drivers/md/dm-verity-fec.h |    4 ++++
 2 files changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -439,6 +439,13 @@ int verity_fec_decode(struct dm_verity *
 	if (!verity_fec_is_enabled(v))
 		return -EOPNOTSUPP;
 
+	if (fio->level >= DM_VERITY_FEC_MAX_RECURSION) {
+		DMWARN_LIMIT("%s: FEC: recursion too deep", v->data_dev->name);
+		return -EIO;
+	}
+
+	fio->level++;
+
 	if (type == DM_VERITY_BLOCK_TYPE_METADATA)
 		block += v->data_blocks;
 
@@ -470,7 +477,7 @@ int verity_fec_decode(struct dm_verity *
 	if (r < 0) {
 		r = fec_decode_rsb(v, io, fio, rsb, offset, true);
 		if (r < 0)
-			return r;
+			goto done;
 	}
 
 	if (dest)
@@ -480,6 +487,8 @@ int verity_fec_decode(struct dm_verity *
 		r = verity_for_bv_block(v, io, iter, fec_bv_copy);
 	}
 
+done:
+	fio->level--;
 	return r;
 }
 
@@ -520,6 +529,7 @@ void verity_fec_init_io(struct dm_verity
 	memset(fio->bufs, 0, sizeof(fio->bufs));
 	fio->nbufs = 0;
 	fio->output = NULL;
+	fio->level = 0;
 }
 
 /*
--- a/drivers/md/dm-verity-fec.h
+++ b/drivers/md/dm-verity-fec.h
@@ -27,6 +27,9 @@
 #define DM_VERITY_FEC_BUF_MAX \
 	(1 << (PAGE_SHIFT - DM_VERITY_FEC_BUF_RS_BITS))
 
+/* maximum recursion level for verity_fec_decode */
+#define DM_VERITY_FEC_MAX_RECURSION	4
+
 #define DM_VERITY_OPT_FEC_DEV		"use_fec_from_device"
 #define DM_VERITY_OPT_FEC_BLOCKS	"fec_blocks"
 #define DM_VERITY_OPT_FEC_START		"fec_start"
@@ -58,6 +61,7 @@ struct dm_verity_fec_io {
 	unsigned nbufs;		/* number of buffers allocated */
 	u8 *output;		/* buffer for corrected output */
 	size_t output_pos;
+	unsigned level;		/* recursion level */
 };
 
 #ifdef CONFIG_DM_VERITY_FEC

[PATCH 4.9 021/152] dm verity fec: fix bufio leaks

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sami Tolvanen <samitolvanen@google.com>

commit 86e3e83b443669dd2bcc5c8a83b23e3aa0694c0d upstream.

Buffers read through dm_bufio_read() were not released in all code paths.

Fixes: a739ff3f543a ("dm verity: add support for forward error correction")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-verity-fec.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-verity-fec.c
+++ b/drivers/md/dm-verity-fec.c
@@ -146,8 +146,6 @@ static int fec_decode_bufs(struct dm_ver
 		block = fec_buffer_rs_block(v, fio, n, i);
 		res = fec_decode_rs8(v, fio, block, &par[offset], neras);
 		if (res < 0) {
-			dm_bufio_release(buf);
-
 			r = res;
 			goto error;
 		}
@@ -172,6 +170,8 @@ static int fec_decode_bufs(struct dm_ver
 done:
 	r = corrected;
 error:
+	dm_bufio_release(buf);
+
 	if (r < 0 && neras)
 		DMERR_LIMIT("%s: FEC %llu: failed to correct: %d",
 			    v->data_dev->name, (unsigned long long)rsb, r);
@@ -269,7 +269,7 @@ static int fec_read_bufs(struct dm_verit
 					  &is_zero) == 0) {
 			/* skip known zero blocks entirely */
 			if (is_zero)
-				continue;
+				goto done;
 
 			/*
 			 * skip if we have already found the theoretical

[PATCH 4.9 022/152] ACPI / gpio: do not fall back to parsing _CRS when we get a deferral

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

commit 693bdaa164b40b7aa6018b98af6f7e40dbd52457 upstream.

If, while locating GPIOs by name, we get probe deferral, we should
immediately report it to caller rather than trying to fall back to parsing
unnamed GPIOs from _CRS block.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-and-Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib-acpi.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -571,8 +571,10 @@ struct gpio_desc *acpi_find_gpio(struct
 		}
 
 		desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
-		if (!IS_ERR(desc) || (PTR_ERR(desc) == -EPROBE_DEFER))
+		if (!IS_ERR(desc))
 			break;
+		if (PTR_ERR(desc) == -EPROBE_DEFER)
+			return ERR_CAST(desc);
 	}
 
 	/* Then from plain _CRS GPIOs */

[PATCH 4.9 023/152] Kbuild: use cc-disable-warning consistently for maybe-uninitialized

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

commit b334e19ae9381f12a7521976883022385d2b7eef upstream.

In commit a76bcf557ef4 ("Kbuild: enable -Wmaybe-uninitialized warning
for "make W=1""), I reverted another change that happened to fix a problem
with old compilers, and now we get this report again with old compilers
(prior to gcc-4.8) and GCOV enabled:

   cc1: warnings being treated as errors
   drivers/gpu/drm/i915/intel_ringbuffer.c: In function 'intel_ring_setup_status_page':
   drivers/gpu/drm/i915/intel_ringbuffer.c:438: error: 'mmio.reg' may be used uninitialized in this function
   At top level:
>> cc1: error: unrecognized command line option "-Wno-maybe-uninitialized"

The problem is that we turn off the warning conditionally in a number
of places as we should, but one of them does it unconditionally.
Instead, change it to call cc-disable-warning as we do elsewhere.

The original patch that caused it was merged into linux-4.7, then
4.8 removed the change and 4.9 brought it back, so we probably want
a backport to 4.9 once this is merged.

Use a ':=' assignment instead of '=' to force the cc-disable-warning
call to only be evaluated once instead of every time.

Fixes: a76bcf557ef4 ("Kbuild: enable -Wmaybe-uninitialized warning for "make W=1"")
Fixes: e72e2dfe7c16 ("gcov: disable -Wmaybe-uninitialized warning")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -370,7 +370,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 LDFLAGS_vmlinux =
-CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
+CFLAGS_GCOV	:= -fprofile-arcs -ftest-coverage -fno-tree-loop-im $(call cc-disable-warning,maybe-uninitialized,)
 CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)
 
 

[PATCH 4.9 024/152] orangefs: move features validation to fix filesystem hang

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin Brandenburg <martin@omnibond.com>

commit cefdc26e86728812aea54248a534fd4a5da2a43d upstream.

Without this fix (and another to the userspace component itself
described later), the kernel will be unable to process any OrangeFS
requests after the userspace component is restarted (due to a crash or
at the administrator's behest).

The bug here is that inside orangefs_remount, the orangefs_request_mutex
is locked.  When the userspace component restarts while the filesystem
is mounted, it sends a ORANGEFS_DEV_REMOUNT_ALL ioctl to the device,
which causes the kernel to send it a few requests aimed at synchronizing
the state between the two.  While this is happening the
orangefs_request_mutex is locked to prevent any other requests going
through.

This is only half of the bugfix.  The other half is in the userspace
component which outright ignores(!) requests made before it considers
the filesystem remounted, which is after the ioctl returns.  Of course
the ioctl doesn't return until after the userspace component responds to
the request it ignores.  The userspace component has been changed to
allow ORANGEFS_VFS_OP_FEATURES regardless of the mount status.

Mike Marshall says:
 "I've tested this patch against the fixed userspace part. This patch is
  real important, I hope it can make it into 4.11...

  Here's what happens when the userspace daemon is restarted, without
  the patch:

    =============================================
    [ INFO: possible recursive locking detected ]
    [   4.10.0-00007-ge98bdb3 #1 Not tainted    ]
    ---------------------------------------------
    pvfs2-client-co/29032 is trying to acquire lock:
     (orangefs_request_mutex){+.+.+.}, at: service_operation+0x3c7/0x7b0 [orangefs]
                  but task is already holding lock:
     (orangefs_request_mutex){+.+.+.}, at: dispatch_ioctl_command+0x1bf/0x330 [orangefs]

    CPU: 0 PID: 29032 Comm: pvfs2-client-co Not tainted 4.10.0-00007-ge98bdb3 #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
    Call Trace:
     __lock_acquire+0x7eb/0x1290
     lock_acquire+0xe8/0x1d0
     mutex_lock_killable_nested+0x6f/0x6e0
     service_operation+0x3c7/0x7b0 [orangefs]
     orangefs_remount+0xea/0x150 [orangefs]
     dispatch_ioctl_command+0x227/0x330 [orangefs]
     orangefs_devreq_ioctl+0x29/0x70 [orangefs]
     do_vfs_ioctl+0xa3/0x6e0
     SyS_ioctl+0x79/0x90"

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Acked-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/orangefs/super.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/orangefs/super.c
+++ b/fs/orangefs/super.c
@@ -263,8 +263,13 @@ int orangefs_remount(struct orangefs_sb_
 		if (!new_op)
 			return -ENOMEM;
 		new_op->upcall.req.features.features = 0;
-		ret = service_operation(new_op, "orangefs_features", 0);
-		orangefs_features = new_op->downcall.resp.features.features;
+		ret = service_operation(new_op, "orangefs_features",
+		    ORANGEFS_OP_PRIORITY | ORANGEFS_OP_NO_MUTEX);
+		if (!ret)
+			orangefs_features =
+			    new_op->downcall.resp.features.features;
+		else
+			orangefs_features = 0;
 		op_release(new_op);
 	} else {
 		orangefs_features = 0;

[PATCH 4.9 025/152] xfs: Honor FALLOC_FL_KEEP_SIZE when punching ends of files

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Calvin Owens <calvinowens@fb.com>

commit 3dd09d5a8589c640abb49cfcf92b4ed669eafad1 upstream.

When punching past EOF on XFS, fallocate(mode=PUNCH_HOLE|KEEP_SIZE) will
round the file size up to the nearest multiple of PAGE_SIZE:

  calvinow@vm-disks/generic-xfs-1 ~$ dd if=/dev/urandom of=test bs=2048 count=1
  calvinow@vm-disks/generic-xfs-1 ~$ stat test
    Size: 2048            Blocks: 8          IO Block: 4096   regular file
  calvinow@vm-disks/generic-xfs-1 ~$ fallocate -n -l 2048 -o 2048 -p test
  calvinow@vm-disks/generic-xfs-1 ~$ stat test
    Size: 4096            Blocks: 8          IO Block: 4096   regular file

Commit 3c2bdc912a1cc050 ("xfs: kill xfs_zero_remaining_bytes") replaced
xfs_zero_remaining_bytes() with calls to iomap helpers. The new helpers
don't enforce that [pos,offset) lies strictly on [0,i_size) when being
called from xfs_free_file_space(), so by "leaking" these ranges into
xfs_zero_range() we get this buggy behavior.

Fix this by reintroducing the checks xfs_zero_remaining_bytes() did
against i_size at the bottom of xfs_free_file_space().

Reported-by: Aaron Gao <gzh@fb.com>
Fixes: 3c2bdc912a1cc050 ("xfs: kill xfs_zero_remaining_bytes")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xfs/xfs_bmap_util.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1318,8 +1318,16 @@ xfs_free_file_space(
 	/*
 	 * Now that we've unmap all full blocks we'll have to zero out any
 	 * partial block at the beginning and/or end.  xfs_zero_range is
-	 * smart enough to skip any holes, including those we just created.
+	 * smart enough to skip any holes, including those we just created,
+	 * but we must take care not to zero beyond EOF and enlarge i_size.
 	 */
+
+	if (offset >= XFS_ISIZE(ip))
+		return 0;
+
+	if (offset + len > XFS_ISIZE(ip))
+		len = XFS_ISIZE(ip) - offset;
+
 	return xfs_zero_range(ip, offset, len, NULL);
 }
 

[PATCH 4.9 026/152] ring-buffer: Fix return value check in test_ringbuffer()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

commit 62277de758b155dc04b78f195a1cb5208c37b2df upstream.

In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com

Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ring_buffer.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -4870,9 +4870,9 @@ static __init int test_ringbuffer(void)
 		rb_data[cpu].cnt = cpu;
 		rb_threads[cpu] = kthread_create(rb_test, &rb_data[cpu],
 						 "rbtester/%d", cpu);
-		if (WARN_ON(!rb_threads[cpu])) {
+		if (WARN_ON(IS_ERR(rb_threads[cpu]))) {
 			pr_cont("FAILED\n");
-			ret = -1;
+			ret = PTR_ERR(rb_threads[cpu]);
 			goto out_free;
 		}
 
@@ -4882,9 +4882,9 @@ static __init int test_ringbuffer(void)
 
 	/* Now create the rb hammer! */
 	rb_hammer = kthread_run(rb_hammer_test, NULL, "rbhammer");
-	if (WARN_ON(!rb_hammer)) {
+	if (WARN_ON(IS_ERR(rb_hammer))) {
 		pr_cont("FAILED\n");
-		ret = -1;
+		ret = PTR_ERR(rb_hammer);
 		goto out_free;
 	}
 

[PATCH 4.9 027/152] mac80211: unconditionally start new netdev queues with iTXQ support

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Berg <johannes.berg@intel.com>

commit 7d65f82954dadbbe7b6e1aec7e07ad17bc6d958b upstream.

When internal mac80211 TXQs aren't supported, netdev queues must
always started out started even when driver queues are stopped
while the interface is added. This is necessary because with the
internal TXQ support netdev queues are never stopped and packet
scheduling/dropping is done in mac80211.

Fixes: 80a83cfc434b1 ("mac80211: skip netdev queue control with software queuing")
Reported-and-tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/iface.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -726,7 +726,8 @@ int ieee80211_do_open(struct wireless_de
 	ieee80211_recalc_ps(local);
 
 	if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
+	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+	    local->ops->wake_tx_queue) {
 		/* XXX: for AP_VLAN, actually track AP queues */
 		netif_tx_start_all_queues(dev);
 	} else if (dev) {

[PATCH 4.9 028/152] brcmfmac: use local iftype avoiding use-after-free of virtual interface

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit d77facb88448cdeaaa3adba5b9704a48ac2ac8d6 upstream.

A use-after-free was found using KASAN. In brcmf_p2p_del_if() the virtual
interface is removed using call to brcmf_remove_interface(). After that
the virtual interface instance has been freed and should not be referenced.
Solve this by storing the nl80211 iftype in local variable, which is used
in a couple of places anyway.

Reported-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -2238,14 +2238,16 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
 	struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy);
 	struct brcmf_p2p_info *p2p = &cfg->p2p;
 	struct brcmf_cfg80211_vif *vif;
+	enum nl80211_iftype iftype;
 	bool wait_for_disable = false;
 	int err;
 
 	brcmf_dbg(TRACE, "delete P2P vif\n");
 	vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev);
 
+	iftype = vif->wdev.iftype;
 	brcmf_cfg80211_arm_vif_event(cfg, vif);
-	switch (vif->wdev.iftype) {
+	switch (iftype) {
 	case NL80211_IFTYPE_P2P_CLIENT:
 		if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state))
 			wait_for_disable = true;
@@ -2275,7 +2277,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
 					    BRCMF_P2P_DISABLE_TIMEOUT);
 
 	err = 0;
-	if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE) {
+	if (iftype != NL80211_IFTYPE_P2P_DEVICE) {
 		brcmf_vif_clear_mgmt_ies(vif);
 		err = brcmf_p2p_release_p2p_if(vif);
 	}
@@ -2291,7 +2293,7 @@ int brcmf_p2p_del_vif(struct wiphy *wiph
 	brcmf_remove_interface(vif->ifp, true);
 
 	brcmf_cfg80211_arm_vif_event(cfg, NULL);
-	if (vif->wdev.iftype != NL80211_IFTYPE_P2P_DEVICE)
+	if (iftype != NL80211_IFTYPE_P2P_DEVICE)
 		p2p->bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = NULL;
 
 	return err;

[PATCH 4.9 029/152] metag/usercopy: Drop unused macros

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit ef62a2d81f73d9cddef14bc3d9097a57010d551c upstream.

Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger
copies between 5 and 16 bytes which are completely unused. Before fixing
zeroing lets drop these macros so there is less to fix.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |  113 ----------------------------------------------
 1 file changed, 113 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -651,119 +651,6 @@ EXPORT_SYMBOL(__copy_user);
 #define __asm_copy_from_user_4(to, from, ret) \
 	__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
 
-#define __asm_copy_from_user_5(to, from, ret) \
-	__asm_copy_from_user_4x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"4:	SETB [%0++],D1Ar1\n",		\
-		"5:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 4b,5b\n")
-
-#define __asm_copy_from_user_6x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_4x_cont(to, from, ret,	\
-		"	GETW D1Ar1,[%1++]\n"		\
-		"4:	SETW [%0++],D1Ar1\n" COPY,	\
-		"5:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 4b,5b\n" TENTRY)
-
-#define __asm_copy_from_user_6(to, from, ret) \
-	__asm_copy_from_user_6x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_7(to, from, ret) \
-	__asm_copy_from_user_6x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"6:	SETB [%0++],D1Ar1\n",		\
-		"7:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 6b,7b\n")
-
-#define __asm_copy_from_user_8x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_4x_cont(to, from, ret,	\
-		"	GETD D1Ar1,[%1++]\n"		\
-		"4:	SETD [%0++],D1Ar1\n" COPY,	\
-		"5:	ADD  %2,%2,#4\n"			\
-		"	SETD [%0++],D1Ar1\n" FIXUP,		\
-		"	.long 4b,5b\n" TENTRY)
-
-#define __asm_copy_from_user_8(to, from, ret) \
-	__asm_copy_from_user_8x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_9(to, from, ret) \
-	__asm_copy_from_user_8x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"6:	SETB [%0++],D1Ar1\n",		\
-		"7:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 6b,7b\n")
-
-#define __asm_copy_from_user_10x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_8x_cont(to, from, ret,	\
-		"	GETW D1Ar1,[%1++]\n"		\
-		"6:	SETW [%0++],D1Ar1\n" COPY,	\
-		"7:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 6b,7b\n" TENTRY)
-
-#define __asm_copy_from_user_10(to, from, ret) \
-	__asm_copy_from_user_10x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_11(to, from, ret)		\
-	__asm_copy_from_user_10x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"8:	SETB [%0++],D1Ar1\n",		\
-		"9:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 8b,9b\n")
-
-#define __asm_copy_from_user_12x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_8x_cont(to, from, ret,	\
-		"	GETD D1Ar1,[%1++]\n"		\
-		"6:	SETD [%0++],D1Ar1\n" COPY,	\
-		"7:	ADD  %2,%2,#4\n"		\
-		"	SETD [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 6b,7b\n" TENTRY)
-
-#define __asm_copy_from_user_12(to, from, ret) \
-	__asm_copy_from_user_12x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_13(to, from, ret) \
-	__asm_copy_from_user_12x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"8:	SETB [%0++],D1Ar1\n",		\
-		"9:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 8b,9b\n")
-
-#define __asm_copy_from_user_14x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_12x_cont(to, from, ret,	\
-		"	GETW D1Ar1,[%1++]\n"		\
-		"8:	SETW [%0++],D1Ar1\n" COPY,	\
-		"9:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 8b,9b\n" TENTRY)
-
-#define __asm_copy_from_user_14(to, from, ret) \
-	__asm_copy_from_user_14x_cont(to, from, ret, "", "", "")
-
-#define __asm_copy_from_user_15(to, from, ret) \
-	__asm_copy_from_user_14x_cont(to, from, ret,	\
-		"	GETB D1Ar1,[%1++]\n"		\
-		"10:	SETB [%0++],D1Ar1\n",		\
-		"11:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
-		"	.long 10b,11b\n")
-
-#define __asm_copy_from_user_16x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
-	__asm_copy_from_user_12x_cont(to, from, ret,	\
-		"	GETD D1Ar1,[%1++]\n"		\
-		"8:	SETD [%0++],D1Ar1\n" COPY,	\
-		"9:	ADD  %2,%2,#4\n"		\
-		"	SETD [%0++],D1Ar1\n" FIXUP,	\
-		"	.long 8b,9b\n" TENTRY)
-
-#define __asm_copy_from_user_16(to, from, ret) \
-	__asm_copy_from_user_16x_cont(to, from, ret, "", "", "")
 
 #define __asm_copy_from_user_8x64(to, from, ret) \
 	asm volatile (				\

[PATCH 4.9 030/152] metag/usercopy: Fix alignment error checking

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2257211942bbbf6c798ab70b487d7e62f7835a1a upstream.

Fix the error checking of the alignment adjustment code in
raw_copy_from_user(), which mistakenly considers it safe to skip the
error check when aligning the source buffer on a 2 or 4 byte boundary.

If the destination buffer was unaligned it may have started to copy
using byte or word accesses, which could well be at the start of a new
(valid) source page. This would result in it appearing to have copied 1
or 2 bytes at the end of the first (invalid) page rather than none at
all.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -717,6 +717,8 @@ unsigned long __copy_user_zeroing(void *
 	if ((unsigned long) src & 1) {
 		__asm_copy_from_user_1(dst, src, retn);
 		n--;
+		if (retn)
+			goto copy_exception_bytes;
 	}
 	if ((unsigned long) dst & 1) {
 		/* Worst case - byte copy */
@@ -730,6 +732,8 @@ unsigned long __copy_user_zeroing(void *
 	if (((unsigned long) src & 2) && n >= 2) {
 		__asm_copy_from_user_2(dst, src, retn);
 		n -= 2;
+		if (retn)
+			goto copy_exception_bytes;
 	}
 	if ((unsigned long) dst & 2) {
 		/* Second worst case - word copy */
@@ -741,12 +745,6 @@ unsigned long __copy_user_zeroing(void *
 		}
 	}
 
-	/* We only need one check after the unalignment-adjustments,
-	   because if both adjustments were done, either both or
-	   neither reference had an exception.  */
-	if (retn != 0)
-		goto copy_exception_bytes;
-
 #ifdef USE_RAPF
 	/* 64 bit copy loop */
 	if (!(((unsigned long) src | (unsigned long) dst) & 7)) {

[PATCH 4.9 031/152] metag/usercopy: Add early abort to copy_to_user

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit fb8ea062a8f2e85256e13f55696c5c5f0dfdcc8b upstream.

When copying to userland on Meta, if any faults are encountered
immediately abort the copy instead of continuing on and repeatedly
faulting, and worse potentially copying further bytes successfully to
subsequent valid pages.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -538,23 +538,31 @@ unsigned long __copy_user(void __user *p
 	if ((unsigned long) src & 1) {
 		__asm_copy_to_user_1(dst, src, retn);
 		n--;
+		if (retn)
+			return retn + n;
 	}
 	if ((unsigned long) dst & 1) {
 		/* Worst case - byte copy */
 		while (n > 0) {
 			__asm_copy_to_user_1(dst, src, retn);
 			n--;
+			if (retn)
+				return retn + n;
 		}
 	}
 	if (((unsigned long) src & 2) && n >= 2) {
 		__asm_copy_to_user_2(dst, src, retn);
 		n -= 2;
+		if (retn)
+			return retn + n;
 	}
 	if ((unsigned long) dst & 2) {
 		/* Second worst case - word copy */
 		while (n >= 2) {
 			__asm_copy_to_user_2(dst, src, retn);
 			n -= 2;
+			if (retn)
+				return retn + n;
 		}
 	}
 
@@ -569,6 +577,8 @@ unsigned long __copy_user(void __user *p
 		while (n >= 8) {
 			__asm_copy_to_user_8x64(dst, src, retn);
 			n -= 8;
+			if (retn)
+				return retn + n;
 		}
 	}
 	if (n >= RAPF_MIN_BUF_SIZE) {
@@ -581,6 +591,8 @@ unsigned long __copy_user(void __user *p
 		while (n >= 8) {
 			__asm_copy_to_user_8x64(dst, src, retn);
 			n -= 8;
+			if (retn)
+				return retn + n;
 		}
 	}
 #endif
@@ -588,11 +600,15 @@ unsigned long __copy_user(void __user *p
 	while (n >= 16) {
 		__asm_copy_to_user_16(dst, src, retn);
 		n -= 16;
+		if (retn)
+			return retn + n;
 	}
 
 	while (n >= 4) {
 		__asm_copy_to_user_4(dst, src, retn);
 		n -= 4;
+		if (retn)
+			return retn + n;
 	}
 
 	switch (n) {
@@ -609,6 +625,10 @@ unsigned long __copy_user(void __user *p
 		break;
 	}
 
+	/*
+	 * If we get here, retn correctly reflects the number of failing
+	 * bytes.
+	 */
 	return retn;
 }
 EXPORT_SYMBOL(__copy_user);

[PATCH 4.9 032/152] metag/usercopy: Zero rest of buffer from copy_from_user

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 563ddc1076109f2b3f88e6d355eab7b6fd4662cb upstream.

Currently we try to zero the destination for a failed read from userland
in fixup code in the usercopy.c macros. The rest of the destination
buffer is then zeroed from __copy_user_zeroing(), which is used for both
copy_from_user() and __copy_from_user().

Unfortunately we fail to zero in the fixup code as D1Ar1 is set to 0
before the fixup code entry labels, and __copy_from_user() shouldn't even
be zeroing the rest of the buffer.

Move the zeroing out into copy_from_user() and rename
__copy_user_zeroing() to raw_copy_from_user() since it no longer does
any zeroing. This also conveniently matches the name needed for
RAW_COPY_USER support in a later patch.

Fixes: 373cd784d0fc ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/include/asm/uaccess.h |   15 +++++-----
 arch/metag/lib/usercopy.c        |   57 ++++++++++++---------------------------
 2 files changed, 26 insertions(+), 46 deletions(-)

--- a/arch/metag/include/asm/uaccess.h
+++ b/arch/metag/include/asm/uaccess.h
@@ -197,20 +197,21 @@ extern long __must_check strnlen_user(co
 
 #define strlen_user(str) strnlen_user(str, 32767)
 
-extern unsigned long __must_check __copy_user_zeroing(void *to,
-						      const void __user *from,
-						      unsigned long n);
+extern unsigned long raw_copy_from_user(void *to, const void __user *from,
+					unsigned long n);
 
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
+	unsigned long res = n;
 	if (likely(access_ok(VERIFY_READ, from, n)))
-		return __copy_user_zeroing(to, from, n);
-	memset(to, 0, n);
-	return n;
+		res = raw_copy_from_user(to, from, n);
+	if (unlikely(res))
+		memset(to + (n - res), 0, res);
+	return res;
 }
 
-#define __copy_from_user(to, from, n) __copy_user_zeroing(to, from, n)
+#define __copy_from_user(to, from, n) raw_copy_from_user(to, from, n)
 #define __copy_from_user_inatomic __copy_from_user
 
 extern unsigned long __must_check __copy_user(void __user *to,
--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -29,7 +29,6 @@
 		COPY						 \
 		"1:\n"						 \
 		"	.section .fixup,\"ax\"\n"		 \
-		"	MOV D1Ar1,#0\n"				 \
 		FIXUP						 \
 		"	MOVT    D1Ar1,#HI(1b)\n"		 \
 		"	JUMP    D1Ar1,#LO(1b)\n"		 \
@@ -637,16 +636,14 @@ EXPORT_SYMBOL(__copy_user);
 	__asm_copy_user_cont(to, from, ret,	\
 		"	GETB D1Ar1,[%1++]\n"	\
 		"2:	SETB [%0++],D1Ar1\n",	\
-		"3:	ADD  %2,%2,#1\n"	\
-		"	SETB [%0++],D1Ar1\n",	\
+		"3:	ADD  %2,%2,#1\n",	\
 		"	.long 2b,3b\n")
 
 #define __asm_copy_from_user_2x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
 	__asm_copy_user_cont(to, from, ret,		\
 		"	GETW D1Ar1,[%1++]\n"		\
 		"2:	SETW [%0++],D1Ar1\n" COPY,	\
-		"3:	ADD  %2,%2,#2\n"		\
-		"	SETW [%0++],D1Ar1\n" FIXUP,	\
+		"3:	ADD  %2,%2,#2\n" FIXUP,		\
 		"	.long 2b,3b\n" TENTRY)
 
 #define __asm_copy_from_user_2(to, from, ret) \
@@ -656,32 +653,26 @@ EXPORT_SYMBOL(__copy_user);
 	__asm_copy_from_user_2x_cont(to, from, ret,	\
 		"	GETB D1Ar1,[%1++]\n"		\
 		"4:	SETB [%0++],D1Ar1\n",		\
-		"5:	ADD  %2,%2,#1\n"		\
-		"	SETB [%0++],D1Ar1\n",		\
+		"5:	ADD  %2,%2,#1\n",		\
 		"	.long 4b,5b\n")
 
 #define __asm_copy_from_user_4x_cont(to, from, ret, COPY, FIXUP, TENTRY) \
 	__asm_copy_user_cont(to, from, ret,		\
 		"	GETD D1Ar1,[%1++]\n"		\
 		"2:	SETD [%0++],D1Ar1\n" COPY,	\
-		"3:	ADD  %2,%2,#4\n"		\
-		"	SETD [%0++],D1Ar1\n" FIXUP,	\
+		"3:	ADD  %2,%2,#4\n" FIXUP,		\
 		"	.long 2b,3b\n" TENTRY)
 
 #define __asm_copy_from_user_4(to, from, ret) \
 	__asm_copy_from_user_4x_cont(to, from, ret, "", "", "")
 
-
 #define __asm_copy_from_user_8x64(to, from, ret) \
 	asm volatile (				\
 		"	GETL D0Ar2,D1Ar1,[%1++]\n"	\
 		"2:	SETL [%0++],D0Ar2,D1Ar1\n"	\
 		"1:\n"					\
 		"	.section .fixup,\"ax\"\n"	\
-		"	MOV D1Ar1,#0\n"			\
-		"	MOV D0Ar2,#0\n"			\
 		"3:	ADD  %2,%2,#8\n"		\
-		"	SETL [%0++],D0Ar2,D1Ar1\n"	\
 		"	MOVT    D0Ar2,#HI(1b)\n"	\
 		"	JUMP    D0Ar2,#LO(1b)\n"	\
 		"	.previous\n"			\
@@ -721,11 +712,12 @@ EXPORT_SYMBOL(__copy_user);
 		"SUB	%1, %1, #4\n")
 
 
-/* Copy from user to kernel, zeroing the bytes that were inaccessible in
-   userland.  The return-value is the number of bytes that were
-   inaccessible.  */
-unsigned long __copy_user_zeroing(void *pdst, const void __user *psrc,
-				  unsigned long n)
+/*
+ * Copy from user to kernel. The return-value is the number of bytes that were
+ * inaccessible.
+ */
+unsigned long raw_copy_from_user(void *pdst, const void __user *psrc,
+				 unsigned long n)
 {
 	register char *dst asm ("A0.2") = pdst;
 	register const char __user *src asm ("A1.2") = psrc;
@@ -738,7 +730,7 @@ unsigned long __copy_user_zeroing(void *
 		__asm_copy_from_user_1(dst, src, retn);
 		n--;
 		if (retn)
-			goto copy_exception_bytes;
+			return retn + n;
 	}
 	if ((unsigned long) dst & 1) {
 		/* Worst case - byte copy */
@@ -746,14 +738,14 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_1(dst, src, retn);
 			n--;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 	if (((unsigned long) src & 2) && n >= 2) {
 		__asm_copy_from_user_2(dst, src, retn);
 		n -= 2;
 		if (retn)
-			goto copy_exception_bytes;
+			return retn + n;
 	}
 	if ((unsigned long) dst & 2) {
 		/* Second worst case - word copy */
@@ -761,7 +753,7 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_2(dst, src, retn);
 			n -= 2;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 
@@ -777,7 +769,7 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_8x64(dst, src, retn);
 			n -= 8;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 
@@ -793,7 +785,7 @@ unsigned long __copy_user_zeroing(void *
 			__asm_copy_from_user_8x64(dst, src, retn);
 			n -= 8;
 			if (retn)
-				goto copy_exception_bytes;
+				return retn + n;
 		}
 	}
 #endif
@@ -803,7 +795,7 @@ unsigned long __copy_user_zeroing(void *
 		n -= 4;
 
 		if (retn)
-			goto copy_exception_bytes;
+			return retn + n;
 	}
 
 	/* If we get here, there were no memory read faults.  */
@@ -829,21 +821,8 @@ unsigned long __copy_user_zeroing(void *
 	/* If we get here, retn correctly reflects the number of failing
 	   bytes.  */
 	return retn;
-
- copy_exception_bytes:
-	/* We already have "retn" bytes cleared, and need to clear the
-	   remaining "n" bytes.  A non-optimized simple byte-for-byte in-line
-	   memset is preferred here, since this isn't speed-critical code and
-	   we'd rather have this a leaf-function than calling memset.  */
-	{
-		char *endp;
-		for (endp = dst + n; dst < endp; dst++)
-			*dst = 0;
-	}
-
-	return retn + n;
 }
-EXPORT_SYMBOL(__copy_user_zeroing);
+EXPORT_SYMBOL(raw_copy_from_user);
 
 #define __asm_clear_8x64(to, ret) \
 	asm volatile (					\

[PATCH 4.9 033/152] metag/usercopy: Set flags before ADDZ

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit fd40eee1290ad7add7aa665e3ce6b0f9fe9734b4 upstream.

The fixup code for the copy_to_user rapf loops reads TXStatus.LSM_STEP
to decide how far to rewind the source pointer. There is a special case
for the last execution of an MGETL/MGETD, since it leaves LSM_STEP=0
even though the number of MGETLs/MGETDs attempted was 4. This uses ADDZ
which is conditional upon the Z condition flag, but the AND instruction
which masked the TXStatus.LSM_STEP field didn't set the condition flags
based on the result.

Fix that now by using ANDS which does set the flags, and also marking
the condition codes as clobbered by the inline assembly.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -315,7 +315,7 @@
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\
-		: "D1Ar1", "D0Ar2", "memory")
+		: "D1Ar1", "D0Ar2", "cc", "memory")
 
 /*	rewind 'to' and 'from'  pointers when a fault occurs
  *
@@ -341,7 +341,7 @@
 #define __asm_copy_to_user_64bit_rapf_loop(to,	from, ret, n, id)\
 	__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id,		\
 		"LSR	D0Ar2, D0Ar2, #8\n"				\
-		"AND	D0Ar2, D0Ar2, #0x7\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x7\n"				\
 		"ADDZ	D0Ar2, D0Ar2, #4\n"				\
 		"SUB	D0Ar2, D0Ar2, #1\n"				\
 		"MOV	D1Ar1, #4\n"					\
@@ -486,7 +486,7 @@
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\
-		: "D1Ar1", "D0Ar2", "memory")
+		: "D1Ar1", "D0Ar2", "cc", "memory")
 
 /*	rewind 'to' and 'from'  pointers when a fault occurs
  *
@@ -512,7 +512,7 @@
 #define __asm_copy_to_user_32bit_rapf_loop(to, from, ret, n, id)\
 	__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id,		\
 		"LSR	D0Ar2, D0Ar2, #8\n"				\
-		"AND	D0Ar2, D0Ar2, #0x7\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x7\n"				\
 		"ADDZ	D0Ar2, D0Ar2, #4\n"				\
 		"SUB	D0Ar2, D0Ar2, #1\n"				\
 		"MOV	D1Ar1, #4\n"					\

[PATCH 4.9 034/152] metag/usercopy: Fix src fixup in from user rapf loops

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2c0b1df88b987a12d95ea1d6beaf01894f3cc725 upstream.

The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.

Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -687,29 +687,49 @@ EXPORT_SYMBOL(__copy_user);
  *
  *	Rationale:
  *		A fault occurs while reading from user buffer, which is the
- *		source. Since the fault is at a single address, we only
- *		need to rewind by 8 bytes.
+ *		source.
  *		Since we don't write to kernel buffer until we read first,
  *		the kernel buffer is at the right state and needn't be
- *		corrected.
+ *		corrected, but the source must be rewound to the beginning of
+ *		the block, which is LSM_STEP*8 bytes.
+ *		LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ *		and stored in D0Ar2
+ *
+ *		NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ *			LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ *			a fault happens at the 4th write, LSM_STEP will be 0
+ *			instead of 4. The code copes with that.
  */
 #define __asm_copy_from_user_64bit_rapf_loop(to, from, ret, n, id)	\
 	__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id,		\
-		"SUB	%1, %1, #8\n")
+		"LSR	D0Ar2, D0Ar2, #5\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x38\n"				\
+		"ADDZ	D0Ar2, D0Ar2, #32\n"				\
+		"SUB	%1, %1, D0Ar2\n")
 
 /*	rewind 'from' pointer when a fault occurs
  *
  *	Rationale:
  *		A fault occurs while reading from user buffer, which is the
- *		source. Since the fault is at a single address, we only
- *		need to rewind by 4 bytes.
+ *		source.
  *		Since we don't write to kernel buffer until we read first,
  *		the kernel buffer is at the right state and needn't be
- *		corrected.
+ *		corrected, but the source must be rewound to the beginning of
+ *		the block, which is LSM_STEP*4 bytes.
+ *		LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ *		and stored in D0Ar2
+ *
+ *		NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ *			LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ *			a fault happens at the 4th write, LSM_STEP will be 0
+ *			instead of 4. The code copes with that.
  */
 #define __asm_copy_from_user_32bit_rapf_loop(to, from, ret, n, id)	\
 	__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id,		\
-		"SUB	%1, %1, #4\n")
+		"LSR	D0Ar2, D0Ar2, #6\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x1c\n"				\
+		"ADDZ	D0Ar2, D0Ar2, #16\n"				\
+		"SUB	%1, %1, D0Ar2\n")
 
 
 /*

[PATCH 4.9 034/152] metag/usercopy: Fix src fixup in from user rapf loops

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>

commit 2c0b1df88b987a12d95ea1d6beaf01894f3cc725 upstream.

The fixup code to rewind the source pointer in
__asm_copy_from_user_{32,64}bit_rapf_loop() always rewound the source by
a single unit (4 or 8 bytes), however this is insufficient if the fault
didn't occur on the first load in the loop, as the source pointer will
have been incremented but nothing will have been stored until all 4
register [pairs] are loaded.

Read the LSM_STEP field of TXSTATUS (which is already loaded into a
register), a bit like the copy_to_user versions, to determine how many
iterations of MGET[DL] have taken place, all of which need rewinding.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan-1AXoQHu6uovQT0dZR+AlfA@public.gmane.org>
Cc: linux-metag-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Greg Kroah-Hartman <gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>

---
 arch/metag/lib/usercopy.c |   36 ++++++++++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 8 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -687,29 +687,49 @@ EXPORT_SYMBOL(__copy_user);
  *
  *	Rationale:
  *		A fault occurs while reading from user buffer, which is the
- *		source. Since the fault is at a single address, we only
- *		need to rewind by 8 bytes.
+ *		source.
  *		Since we don't write to kernel buffer until we read first,
  *		the kernel buffer is at the right state and needn't be
- *		corrected.
+ *		corrected, but the source must be rewound to the beginning of
+ *		the block, which is LSM_STEP*8 bytes.
+ *		LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ *		and stored in D0Ar2
+ *
+ *		NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ *			LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ *			a fault happens at the 4th write, LSM_STEP will be 0
+ *			instead of 4. The code copes with that.
  */
 #define __asm_copy_from_user_64bit_rapf_loop(to, from, ret, n, id)	\
 	__asm_copy_user_64bit_rapf_loop(to, from, ret, n, id,		\
-		"SUB	%1, %1, #8\n")
+		"LSR	D0Ar2, D0Ar2, #5\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x38\n"				\
+		"ADDZ	D0Ar2, D0Ar2, #32\n"				\
+		"SUB	%1, %1, D0Ar2\n")
 
 /*	rewind 'from' pointer when a fault occurs
  *
  *	Rationale:
  *		A fault occurs while reading from user buffer, which is the
- *		source. Since the fault is at a single address, we only
- *		need to rewind by 4 bytes.
+ *		source.
  *		Since we don't write to kernel buffer until we read first,
  *		the kernel buffer is at the right state and needn't be
- *		corrected.
+ *		corrected, but the source must be rewound to the beginning of
+ *		the block, which is LSM_STEP*4 bytes.
+ *		LSM_STEP is bits 10:8 in TXSTATUS which is already read
+ *		and stored in D0Ar2
+ *
+ *		NOTE: If a fault occurs at the last operation in M{G,S}ETL
+ *			LSM_STEP will be 0. ie: we do 4 writes in our case, if
+ *			a fault happens at the 4th write, LSM_STEP will be 0
+ *			instead of 4. The code copes with that.
  */
 #define __asm_copy_from_user_32bit_rapf_loop(to, from, ret, n, id)	\
 	__asm_copy_user_32bit_rapf_loop(to, from, ret, n, id,		\
-		"SUB	%1, %1, #4\n")
+		"LSR	D0Ar2, D0Ar2, #6\n"				\
+		"ANDS	D0Ar2, D0Ar2, #0x1c\n"				\
+		"ADDZ	D0Ar2, D0Ar2, #16\n"				\
+		"SUB	%1, %1, D0Ar2\n")
 
 
 /*

[PATCH 4.9 035/152] metag/usercopy: Add missing fixups

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit b884a190afcecdbef34ca508ea5ee88bb7c77861 upstream.

The rapf copy loops in the Meta usercopy code is missing some extable
entries for HTP cores with unaligned access checking enabled, where
faults occur on the instruction immediately after the faulting access.

Add the fixup labels and extable entries for these cases so that corner
case user copy failures don't cause kernel crashes.

Fixes: 373cd784d0fc ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/metag/lib/usercopy.c |   72 ++++++++++++++++++++++++++++++----------------
 1 file changed, 48 insertions(+), 24 deletions(-)

--- a/arch/metag/lib/usercopy.c
+++ b/arch/metag/lib/usercopy.c
@@ -259,27 +259,31 @@
 		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
 		"22:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
-		"SUB	%3, %3, #32\n"					\
 		"23:\n"							\
-		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
+		"SUB	%3, %3, #32\n"					\
 		"24:\n"							\
+		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
+		"25:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"26:\n"							\
 		"SUB	%3, %3, #32\n"					\
 		"DCACHE	[%1+#-64], D0Ar6\n"				\
 		"BR	$Lloop"id"\n"					\
 									\
 		"MOV	RAPF, %1\n"					\
-		"25:\n"							\
+		"27:\n"							\
 		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"26:\n"							\
+		"28:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"29:\n"							\
 		"SUB	%3, %3, #32\n"					\
-		"27:\n"							\
+		"30:\n"							\
 		"MGETL	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"28:\n"							\
+		"31:\n"							\
 		"MSETL	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"32:\n"							\
 		"SUB	%0, %0, #8\n"					\
-		"29:\n"							\
+		"33:\n"							\
 		"SETL	[%0++], D0.7, D1.7\n"				\
 		"SUB	%3, %3, #32\n"					\
 		"1:"							\
@@ -311,7 +315,11 @@
 		"	.long 26b,3b\n"					\
 		"	.long 27b,3b\n"					\
 		"	.long 28b,3b\n"					\
-		"	.long 29b,4b\n"					\
+		"	.long 29b,3b\n"					\
+		"	.long 30b,3b\n"					\
+		"	.long 31b,3b\n"					\
+		"	.long 32b,3b\n"					\
+		"	.long 33b,4b\n"					\
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\
@@ -402,47 +410,55 @@
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
 		"22:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
-		"SUB	%3, %3, #16\n"					\
 		"23:\n"							\
-		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"24:\n"							\
-		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
 		"SUB	%3, %3, #16\n"					\
-		"25:\n"							\
+		"24:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"26:\n"							\
+		"25:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"26:\n"							\
 		"SUB	%3, %3, #16\n"					\
 		"27:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
 		"28:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"29:\n"							\
+		"SUB	%3, %3, #16\n"					\
+		"30:\n"							\
+		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
+		"31:\n"							\
+		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"32:\n"							\
 		"SUB	%3, %3, #16\n"					\
 		"DCACHE	[%1+#-64], D0Ar6\n"				\
 		"BR	$Lloop"id"\n"					\
 									\
 		"MOV	RAPF, %1\n"					\
-		"29:\n"							\
+		"33:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"30:\n"							\
+		"34:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"35:\n"							\
 		"SUB	%3, %3, #16\n"					\
-		"31:\n"							\
+		"36:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"32:\n"							\
+		"37:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"38:\n"							\
 		"SUB	%3, %3, #16\n"					\
-		"33:\n"							\
+		"39:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"34:\n"							\
+		"40:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"41:\n"							\
 		"SUB	%3, %3, #16\n"					\
-		"35:\n"							\
+		"42:\n"							\
 		"MGETD	D0FrT, D0.5, D0.6, D0.7, [%1++]\n"		\
-		"36:\n"							\
+		"43:\n"							\
 		"MSETD	[%0++], D0FrT, D0.5, D0.6, D0.7\n"		\
+		"44:\n"							\
 		"SUB	%0, %0, #4\n"					\
-		"37:\n"							\
+		"45:\n"							\
 		"SETD	[%0++], D0.7\n"					\
 		"SUB	%3, %3, #16\n"					\
 		"1:"							\
@@ -482,7 +498,15 @@
 		"	.long 34b,3b\n"					\
 		"	.long 35b,3b\n"					\
 		"	.long 36b,3b\n"					\
-		"	.long 37b,4b\n"					\
+		"	.long 37b,3b\n"					\
+		"	.long 38b,3b\n"					\
+		"	.long 39b,3b\n"					\
+		"	.long 40b,3b\n"					\
+		"	.long 41b,3b\n"					\
+		"	.long 42b,3b\n"					\
+		"	.long 43b,3b\n"					\
+		"	.long 44b,3b\n"					\
+		"	.long 45b,4b\n"					\
 		"	.previous\n"					\
 		: "=r" (to), "=r" (from), "=r" (ret), "=d" (n)		\
 		: "0" (to), "1" (from), "2" (ret), "3" (n)		\

[PATCH 4.9 036/152] powerpc: Disable HFSCR[TM] if TM is not supported

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

commit 7ed23e1bae8bf7e37fd555066550a00b95a3a98b upstream.

On Power8 & Power9 the early CPU inititialisation in __init_HFSCR()
turns on HFSCR[TM] (Hypervisor Facility Status and Control Register
[Transactional Memory]), but that doesn't take into account that TM
might be disabled by CPU features, or disabled by the kernel being built
with CONFIG_PPC_TRANSACTIONAL_MEM=n.

So later in boot, when we have setup the CPU features, clear HSCR[TM] if
the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account
for the CONFIG_PPC_TRANSACTIONAL_MEM=n case.

Without this a KVM guest might try use TM, even if told not to, and
cause an oops in the host kernel. Typically the oops is seen in
__kvmppc_vcore_entry() and may or may not be fatal to the host, but is
always bad news.

In practice all shipping CPU revisions do support TM, and all host
kernels we are aware of build with TM support enabled, so no one should
actually be able to hit this in the wild.

Fixes: 2a3563b023e5 ("powerpc: Setup in HFSCR for POWER8")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[mpe: Rewrite change log with input from Sam, add Fixes/stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/setup_64.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -245,6 +245,15 @@ static void cpu_ready_for_interrupts(voi
 		mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
 	}
 
+	/*
+	 * Fixup HFSCR:TM based on CPU features. The bit is set by our
+	 * early asm init because at that point we haven't updated our
+	 * CPU features from firmware and device-tree. Here we have,
+	 * so let's do it.
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE) && !cpu_has_feature(CPU_FTR_TM_COMP))
+		mtspr(SPRN_HFSCR, mfspr(SPRN_HFSCR) & ~HFSCR_TM);
+
 	/* Set IR and DR in PACA MSR */
 	get_paca()->kernel_msr = MSR_KERNEL;
 }

[PATCH 4.9 037/152] powerpc/mm: Add missing global TLB invalidate if cxl is active

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Frederic Barrat <fbarrat@linux.vnet.ibm.com>

commit 88b1bf7268f56887ca88eb09c6fb0f4fc970121a upstream.

Commit 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl") converted local
TLB invalidates to global if the cxl driver is active. This is necessary
because the CAPP snoops invalidations to forward them to the PSL on the
cxl adapter. However one path was forgotten. native_flush_hash_range()
still does local TLB invalidates, as found out the hard way recently.

This patch fixes it by following the same logic as previously: if the
cxl driver is active, the local TLB invalidates are 'upgraded' to
global.

Fixes: 4c6d9acce1f4 ("powerpc/mm: Add hooks for cxl")
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/hash_native_64.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/arch/powerpc/mm/hash_native_64.c
+++ b/arch/powerpc/mm/hash_native_64.c
@@ -636,6 +636,10 @@ static void native_flush_hash_range(unsi
 	unsigned long psize = batch->psize;
 	int ssize = batch->ssize;
 	int i;
+	unsigned int use_local;
+
+	use_local = local && mmu_has_feature(MMU_FTR_TLBIEL) &&
+		mmu_psize_defs[psize].tlbiel && !cxl_ctx_in_use();
 
 	local_irq_save(flags);
 
@@ -665,8 +669,7 @@ static void native_flush_hash_range(unsi
 		} pte_iterate_hashed_end();
 	}
 
-	if (mmu_has_feature(MMU_FTR_TLBIEL) &&
-	    mmu_psize_defs[psize].tlbiel && local) {
+	if (use_local) {
 		asm volatile("ptesync":::"memory");
 		for (i = 0; i < number; i++) {
 			vpn = batch->vpn[i];

[PATCH 4.9 038/152] powerpc/64: Fix flush_(d|i)cache_range() called from modules

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver O'Halloran <oohall@gmail.com>

commit 8f5f525d5b83f7d76a6baf9c4e94d4bf312ea7f6 upstream.

When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does
not include a global entry point. A function's global entry point is
used when the function is called from a different TOC context and in the
kernel this typically means a call from a module into the vmlinux (or
vice-versa).

There are a few exported asm functions declared with _GLOBAL() and
calling them from a module will likely crash the kernel since any TOC
relative load will yield garbage.

flush_icache_range() and flush_dcache_range() are both exported to
modules, and use the TOC, so must use _GLOBAL_TOC().

Fixes: 721aeaa9fdf3 ("powerpc: Build little endian ppc64 kernel with ABIv2")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/misc_64.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -67,7 +67,7 @@ PPC64_CACHES:
  *   flush all bytes from start through stop-1 inclusive
  */
 
-_GLOBAL(flush_icache_range)
+_GLOBAL_TOC(flush_icache_range)
 BEGIN_FTR_SECTION
 	PURGE_PREFETCHED_INS
 	blr
@@ -120,7 +120,7 @@ EXPORT_SYMBOL(flush_icache_range)
  *
  *    flush all bytes from start to stop-1 inclusive
  */
-_GLOBAL(flush_dcache_range)
+_GLOBAL_TOC(flush_dcache_range)
 
 /*
  * Flush the data cache to memory 

[PATCH 4.9 039/152] powerpc: Dont try to fix up misaligned load-with-reservation instructions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@ozlabs.org>

commit 48fe9e9488743eec9b7c1addd3c93f12f2123d54 upstream.

In the past, there was only one load-with-reservation instruction,
lwarx, and if a program attempted a lwarx on a misaligned address, it
would take an alignment interrupt and the kernel handler would emulate
it as though it was lwzx, which was not really correct, but benign since
it is loading the right amount of data, and the lwarx should be paired
with a stwcx. to the same address, which would also cause an alignment
interrupt which would result in a SIGBUS being delivered to the process.

We now have 5 different sizes of load-with-reservation instruction. Of
those, lharx and ldarx cause an immediate SIGBUS by luck since their
entries in aligninfo[] overlap instructions which were not fixed up, but
lqarx overlaps with lhz and will be emulated as such. lbarx can never
generate an alignment interrupt since it only operates on 1 byte.

To straighten this out and fix the lqarx case, this adds code to detect
the l[hwdq]arx instructions and return without fixing them up, resulting
in a SIGBUS being delivered to the process.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/align.c |   27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -807,14 +807,25 @@ int fix_alignment(struct pt_regs *regs)
 	nb = aligninfo[instr].len;
 	flags = aligninfo[instr].flags;
 
-	/* ldbrx/stdbrx overlap lfs/stfs in the DSISR unfortunately */
-	if (IS_XFORM(instruction) && ((instruction >> 1) & 0x3ff) == 532) {
-		nb = 8;
-		flags = LD+SW;
-	} else if (IS_XFORM(instruction) &&
-		   ((instruction >> 1) & 0x3ff) == 660) {
-		nb = 8;
-		flags = ST+SW;
+	/*
+	 * Handle some cases which give overlaps in the DSISR values.
+	 */
+	if (IS_XFORM(instruction)) {
+		switch (get_xop(instruction)) {
+		case 532:	/* ldbrx */
+			nb = 8;
+			flags = LD+SW;
+			break;
+		case 660:	/* stdbrx */
+			nb = 8;
+			flags = ST+SW;
+			break;
+		case 20:	/* lwarx */
+		case 84:	/* ldarx */
+		case 116:	/* lharx */
+		case 276:	/* lqarx */
+			return 0;	/* not emulated ever */
+		}
 	}
 
 	/* Byteswap little endian loads and stores */

[PATCH 4.9 040/152] powerpc/crypto/crc32c-vpmsum: Fix missing preempt_disable()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

commit 4749228f022893faf54a3dbc70796f78b7d4f342 upstream.

In crc32c_vpmsum() we call enable_kernel_altivec() without first
disabling preemption, which is not allowed:

  WARNING: CPU: 9 PID: 2949 at ../arch/powerpc/kernel/process.c:277 enable_kernel_altivec+0x100/0x120
  Modules linked in: dm_thin_pool dm_persistent_data dm_bio_prison dm_bufio libcrc32c vmx_crypto ...
  CPU: 9 PID: 2949 Comm: docker Not tainted 4.11.0-rc5-compiler_gcc-6.3.1-00033-g308ac7563944 #381
  ...
  NIP [c00000000001e320] enable_kernel_altivec+0x100/0x120
  LR [d000000003df0910] crc32c_vpmsum+0x108/0x150 [crc32c_vpmsum]
  Call Trace:
    0xc138fd09 (unreliable)
    crc32c_vpmsum+0x108/0x150 [crc32c_vpmsum]
    crc32c_vpmsum_update+0x3c/0x60 [crc32c_vpmsum]
    crypto_shash_update+0x88/0x1c0
    crc32c+0x64/0x90 [libcrc32c]
    dm_bm_checksum+0x48/0x80 [dm_persistent_data]
    sb_check+0x84/0x120 [dm_thin_pool]
    dm_bm_validate_buffer.isra.0+0xc0/0x1b0 [dm_persistent_data]
    dm_bm_read_lock+0x80/0xf0 [dm_persistent_data]
    __create_persistent_data_objects+0x16c/0x810 [dm_thin_pool]
    dm_pool_metadata_open+0xb0/0x1a0 [dm_thin_pool]
    pool_ctr+0x4cc/0xb60 [dm_thin_pool]
    dm_table_add_target+0x16c/0x3c0
    table_load+0x184/0x400
    ctl_ioctl+0x2f0/0x560
    dm_ctl_ioctl+0x38/0x50
    do_vfs_ioctl+0xd8/0x920
    SyS_ioctl+0x68/0xc0
    system_call+0x38/0xfc

It used to be sufficient just to call pagefault_disable(), because that
also disabled preemption. But the two were decoupled in commit 8222dbe21e79
("sched/preempt, mm/fault: Decouple preemption from the page fault
logic") in mid 2015.

So add the missing preempt_disable/enable(). We should also call
disable_kernel_fp(), although it does nothing by default, there is a
debug switch to make it active and all enables should be paired with
disables.

Fixes: 6dd7a82cc54e ("crypto: powerpc - Add POWER8 optimised crc32c")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/crypto/crc32c-vpmsum_glue.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/arch/powerpc/crypto/crc32c-vpmsum_glue.c
+++ b/arch/powerpc/crypto/crc32c-vpmsum_glue.c
@@ -33,10 +33,13 @@ static u32 crc32c_vpmsum(u32 crc, unsign
 	}
 
 	if (len & ~VMX_ALIGN_MASK) {
+		preempt_disable();
 		pagefault_disable();
 		enable_kernel_altivec();
 		crc = __crc32c_vpmsum(crc, p, len & ~VMX_ALIGN_MASK);
+		disable_kernel_altivec();
 		pagefault_enable();
+		preempt_enable();
 	}
 
 	tail = len & VMX_ALIGN_MASK;

[PATCH 4.9 042/152] nios2: reserve boot memory for device tree

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Klauser <tklauser@distanz.ch>

commit 921d701e6f31e1ffaca3560416af1aa04edb4c4f upstream.

Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:

  bootconsole [early0] enabled
  Early console on uart16650 initialized at 0xf8001600
  OF: fdt: Error -11 processing FDT
  Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

  ---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

Guenter Roeck says:

> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().

Reported-by: Guenter Roeck <linux@roeck-us.net>
Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/nios2/kernel/prom.c  |    7 +++++++
 arch/nios2/kernel/setup.c |    3 +++
 2 files changed, 10 insertions(+)

--- a/arch/nios2/kernel/prom.c
+++ b/arch/nios2/kernel/prom.c
@@ -48,6 +48,13 @@ void * __init early_init_dt_alloc_memory
 	return alloc_bootmem_align(size, align);
 }
 
+int __init early_init_dt_reserve_memory_arch(phys_addr_t base, phys_addr_t size,
+					     bool nomap)
+{
+	reserve_bootmem(base, size, BOOTMEM_DEFAULT);
+	return 0;
+}
+
 void __init early_init_devtree(void *params)
 {
 	__be32 *dtb = (u32 *)__dtb_start;
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -195,6 +195,9 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+
 	unflatten_and_copy_device_tree();
 
 	setup_cpuinfo();

[PATCH 4.9 043/152] xtensa: make __pa work with uncached KSEG addresses

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit 2b83878dd74a7c73bedcb6600663c1c46836e8af upstream.

When __pa is applied to virtual address in uncached KSEG region the
result is incorrect. Fix it by checking if the original address is in
the uncached KSEG and adjusting the result. It looks better than masking
off bits because pfn_valid would correctly work with new __pa results
and it may be made working in noMMU case, once we get definition for
uncached memory view.

This is required for the dma_common_mmap and DMA debug code to work
correctly: they both indirectly use __pa with coherent DMA addresses.
In case of DMA debug the visible effect is false reports that an address
mapped for DMA is accessed by CPU.

Tested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/include/asm/page.h |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/arch/xtensa/include/asm/page.h
+++ b/arch/xtensa/include/asm/page.h
@@ -164,8 +164,21 @@ void copy_user_highpage(struct page *to,
 
 #define ARCH_PFN_OFFSET		(PHYS_OFFSET >> PAGE_SHIFT)
 
+#ifdef CONFIG_MMU
+static inline unsigned long ___pa(unsigned long va)
+{
+	unsigned long off = va - PAGE_OFFSET;
+
+	if (off >= XCHAL_KSEG_SIZE)
+		off -= XCHAL_KSEG_SIZE;
+
+	return off + PHYS_OFFSET;
+}
+#define __pa(x)	___pa((unsigned long)(x))
+#else
 #define __pa(x)	\
 	((unsigned long) (x) - PAGE_OFFSET + PHYS_OFFSET)
+#endif
 #define __va(x)	\
 	((void *)((unsigned long) (x) - PHYS_OFFSET + PAGE_OFFSET))
 #define pfn_valid(pfn) \

[PATCH 4.9 044/152] s390/decompressor: fix initrd corruption caused by bss clear

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>

commit d82c0d12c92705ef468683c9b7a8298dd61ed191 upstream.

Reorder the operations in decompress_kernel() to ensure initrd is moved
to a safe location before the bss section is zeroed.

During decompression bss can overlap with the initrd and this can
corrupt the initrd contents depending on the size of the compressed
kernel (which affects where the initrd is placed by the bootloader) and
the size of the bss section of the decompressor.

Also use the correct initrd size when checking for overlaps with
parmblock.

Fixes: 06c0dd72aea3 ([S390] fix boot failures with compressed kernels)
Reviewed-by: Joy Latten <joy.latten@canonical.com>
Reviewed-by: Vineetha HariPai <vineetha.hari.pai@canonical.com>
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/boot/compressed/misc.c |   35 +++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 16 deletions(-)

--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -141,31 +141,34 @@ static void check_ipl_parmblock(void *st
 
 unsigned long decompress_kernel(void)
 {
-	unsigned long output_addr;
-	unsigned char *output;
+	void *output, *kernel_end;
 
-	output_addr = ((unsigned long) &_end + HEAP_SIZE + 4095UL) & -4096UL;
-	check_ipl_parmblock((void *) 0, output_addr + SZ__bss_start);
-	memset(&_bss, 0, &_ebss - &_bss);
-	free_mem_ptr = (unsigned long)&_end;
-	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
-	output = (unsigned char *) output_addr;
+	output = (void *) ALIGN((unsigned long) &_end + HEAP_SIZE, PAGE_SIZE);
+	kernel_end = output + SZ__bss_start;
+	check_ipl_parmblock((void *) 0, (unsigned long) kernel_end);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
 	 * Move the initrd right behind the end of the decompressed
-	 * kernel image.
+	 * kernel image. This also prevents initrd corruption caused by
+	 * bss clearing since kernel_end will always be located behind the
+	 * current bss section..
 	 */
-	if (INITRD_START && INITRD_SIZE &&
-	    INITRD_START < (unsigned long) output + SZ__bss_start) {
-		check_ipl_parmblock(output + SZ__bss_start,
-				    INITRD_START + INITRD_SIZE);
-		memmove(output + SZ__bss_start,
-			(void *) INITRD_START, INITRD_SIZE);
-		INITRD_START = (unsigned long) output + SZ__bss_start;
+	if (INITRD_START && INITRD_SIZE && kernel_end > (void *) INITRD_START) {
+		check_ipl_parmblock(kernel_end, INITRD_SIZE);
+		memmove(kernel_end, (void *) INITRD_START, INITRD_SIZE);
+		INITRD_START = (unsigned long) kernel_end;
 	}
 #endif
 
+	/*
+	 * Clear bss section. free_mem_ptr and free_mem_end_ptr need to be
+	 * initialized afterwards since they reside in bss.
+	 */
+	memset(&_bss, 0, &_ebss - &_bss);
+	free_mem_ptr = (unsigned long) &_end;
+	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
+
 	puts("Uncompressing Linux... ");
 	__decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error);
 	puts("Ok, booting the kernel.\n");

[PATCH 4.9 045/152] s390/uaccess: get_user() should zero on failure (again)

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit d09c5373e8e4eaaa09233552cbf75dc4c4f21203 upstream.

Commit fd2d2b191fe7 ("s390: get_user() should zero on failure")
intended to fix s390's get_user() implementation which did not zero
the target operand if the read from user space faulted. Unfortunately
the patch has no effect: the corresponding inline assembly specifies
that the operand is only written to ("=") and the previous value is
discarded.

Therefore the compiler is free to and actually does omit the zero
initialization.

To fix this simply change the contraint modifier to "+", so the
compiler cannot omit the initialization anymore.

Fixes: c9ca78415ac1 ("s390/uaccess: provide inline variants of get_user/put_user")
Fixes: fd2d2b191fe7 ("s390: get_user() should zero on failure")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/include/asm/uaccess.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -144,7 +144,7 @@ unsigned long __must_check __copy_to_use
 		"	jg	2b\n"				\
 		".popsection\n"					\
 		EX_TABLE(0b,3b) EX_TABLE(1b,3b)			\
-		: "=d" (__rc), "=Q" (*(to))			\
+		: "=d" (__rc), "+Q" (*(to))			\
 		: "d" (size), "Q" (*(from)),			\
 		  "d" (__reg0), "K" (-EFAULT)			\
 		: "cc");					\

[PATCH 4.9 046/152] MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Hogan <james.hogan@imgtec.com>

commit 2e6c7747730296a6d4fd700894286db1132598c4 upstream.

When a 32-bit kernel is configured to support MIPS64r6 (CPU_MIPS64_R6),
MIPS_O32_FP64_SUPPORT won't be selected as it should be because
MIPS32_O32 is disabled (o32 is already the default ABI available on
32-bit kernels).

This results in userland FP breakage as CP0_Status.FR is read-only 1
since r6 (when an FPU is present) so __enable_fpu() will fail to clear
FR. This causes the FPU emulator to get used which will incorrectly
emulate 32-bit FPU registers.

Force o32 fp64 support in this case by also selecting
MIPS_O32_FP64_SUPPORT from CPU_MIPS64_R6 if 32BIT.

Fixes: 4e9d324d4288 ("MIPS: Require O32 FP64 support for MIPS64 with O32 compat")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15310/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1526,7 +1526,7 @@ config CPU_MIPS64_R6
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_MSA
 	select GENERIC_CSUM
-	select MIPS_O32_FP64_SUPPORT if MIPS32_O32
+	select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32
 	select HAVE_KVM
 	help
 	  Choose this option to build a kernel for release 6 or later of the

[PATCH 4.9 047/152] MIPS: ralink: Fix typos in rt3883 pinctrl

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Crispin <john@phrozen.org>

commit 7c5a3d813050ee235817b0220dd8c42359a9efd8 upstream.

There are two copy & paste errors in the definition of the 5GHz LNA and
second ethernet pinmux.

Fixes: f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15328/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ralink/rt3883.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_f
 static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
 static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
 static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna g", 0, 35, 3) };
 static struct rt2880_pmx_func pci_func[] = {
 	FUNC("pci-dev", 0, 40, 32),
 	FUNC("pci-host2", 1, 40, 32),
@@ -44,7 +44,7 @@ static struct rt2880_pmx_func pci_func[]
 	FUNC("pci-fnc", 3, 40, 32)
 };
 static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 84, 12) };
 
 static struct rt2880_pmx_group rt3883_pinmux_data[] = {
 	GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),

[PATCH 4.9 048/152] MIPS: End spinlocks with .insn

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Burton <paul.burton@imgtec.com>

commit 4b5347a24a0f2d3272032c120664b484478455de upstream.

When building for microMIPS we need to ensure that the assembler always
knows that there is code at the target of a branch or jump. Recent
toolchains will fail to link a microMIPS kernel when this isn't the case
due to what it thinks is a branch to non-microMIPS code.

mips-mti-linux-gnu-ld kernel/built-in.o: .spinlock.text+0x2fc: Unsupported branch between ISA modes.
mips-mti-linux-gnu-ld final link failed: Bad value

This is due to inline assembly labels in spinlock.h not being followed
by an instruction mnemonic, either due to a .subsection pseudo-op or the
end of the inline asm block.

Fix this with a .insn direction after such labels.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15325/
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/spinlock.h |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/mips/include/asm/spinlock.h
+++ b/arch/mips/include/asm/spinlock.h
@@ -127,7 +127,7 @@ static inline void arch_spin_lock(arch_s
 		"	andi	%[ticket], %[ticket], 0xffff		\n"
 		"	bne	%[ticket], %[my_ticket], 4f		\n"
 		"	 subu	%[ticket], %[my_ticket], %[ticket]	\n"
-		"2:							\n"
+		"2:	.insn						\n"
 		"	.subsection 2					\n"
 		"4:	andi	%[ticket], %[ticket], 0xffff		\n"
 		"	sll	%[ticket], 5				\n"
@@ -202,7 +202,7 @@ static inline unsigned int arch_spin_try
 		"	sc	%[ticket], %[ticket_ptr]		\n"
 		"	beqz	%[ticket], 1b				\n"
 		"	 li	%[ticket], 1				\n"
-		"2:							\n"
+		"2:	.insn						\n"
 		"	.subsection 2					\n"
 		"3:	b	2b					\n"
 		"	 li	%[ticket], 0				\n"
@@ -382,7 +382,7 @@ static inline int arch_read_trylock(arch
 		"	.set	reorder					\n"
 		__WEAK_LLSC_MB
 		"	li	%2, 1					\n"
-		"2:							\n"
+		"2:	.insn						\n"
 		: "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp), "=&r" (ret)
 		: GCC_OFF_SMALL_ASM() (rw->lock)
 		: "memory");
@@ -422,7 +422,7 @@ static inline int arch_write_trylock(arc
 			"	lui	%1, 0x8000			\n"
 			"	sc	%1, %0				\n"
 			"	li	%2, 1				\n"
-			"2:						\n"
+			"2:	.insn					\n"
 			: "=" GCC_OFF_SMALL_ASM() (rw->lock), "=&r" (tmp),
 			  "=&r" (ret)
 			: GCC_OFF_SMALL_ASM() (rw->lock)

[PATCH 4.9 049/152] MIPS: Lantiq: fix missing xbar kernel panic

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hauke Mehrtens <hauke@hauke-m.de>

commit 6ef90877eee63a0d03e83183bb44b64229b624e6 upstream.

Commit 08b3c894e565 ("MIPS: lantiq: Disable xbar fpi burst mode")
accidentally requested the resources from the pmu address region
instead of the xbar registers region, but the check for the return
value of request_mem_region() was wrong. Commit 98ea51cb0c8c ("MIPS:
Lantiq: Fix another request_mem_region() return code check") fixed the
check of the return value of request_mem_region() which made the kernel
panics.
This patch now makes use of the correct memory region for the cross bar.

Fixes: 08b3c894e565 ("MIPS: lantiq: Disable xbar fpi burst mode")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
Cc: james.hogan@imgtec.com
Cc: arnd@arndb.de
Cc: sergei.shtylyov@cogentembedded.com
Cc: john@phrozen.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15751
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/lantiq/xway/sysctrl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -467,7 +467,7 @@ void __init ltq_soc_init(void)
 
 		if (!np_xbar)
 			panic("Failed to load xbar nodes from devicetree");
-		if (of_address_to_resource(np_pmu, 0, &res_xbar))
+		if (of_address_to_resource(np_xbar, 0, &res_xbar))
 			panic("Failed to get xbar resources");
 		if (request_mem_region(res_xbar.start, resource_size(&res_xbar),
 			res_xbar.name) < 0)

[PATCH 4.9 050/152] MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 5a34133167dce36666ea054e30a561b7f4413b7f upstream.

Loongson-3's micro TLB (ITLB) is not strictly a subset of JTLB. That
means: when a JTLB entry is replaced by hardware, there may be an old
valid entry exists in ITLB. So, a TLB miss exception may occur while
handle_ri_rdhwr() is running because it try to access EPC's content.
However, handle_ri_rdhwr() doesn't clear EXL, which makes a TLB Refill
exception be treated as a TLB Invalid exception and tlbp may fail. In
this case, if FTLB (which is usually set-associative instead of set-
associative) is enabled, a tlbp failure will cause an invalid tlbwi,
which will hang the whole system.

This patch rename handle_ri_rdhwr_vivt to handle_ri_rdhwr_tlbp and use
it for Loongson-3. It try to solve the same problem described as below,
but more straightforwards.

https://patchwork.linux-mips.org/patch/12591/

I think Loongson-2 has the same problem, but it has no FTLB, so we just
keep it as is.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Rui Wang <wangr@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15753/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/genex.S |    4 ++--
 arch/mips/kernel/traps.c |   17 +++++++++++++----
 2 files changed, 15 insertions(+), 6 deletions(-)

--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -448,7 +448,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	BUILD_HANDLER reserved reserved sti verbose	/* others */
 
 	.align	5
-	LEAF(handle_ri_rdhwr_vivt)
+	LEAF(handle_ri_rdhwr_tlbp)
 	.set	push
 	.set	noat
 	.set	noreorder
@@ -467,7 +467,7 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.set	pop
 	bltz	k1, handle_ri	/* slow path */
 	/* fall thru */
-	END(handle_ri_rdhwr_vivt)
+	END(handle_ri_rdhwr_tlbp)
 
 	LEAF(handle_ri_rdhwr)
 	.set	push
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -81,7 +81,7 @@ extern asmlinkage void handle_dbe(void);
 extern asmlinkage void handle_sys(void);
 extern asmlinkage void handle_bp(void);
 extern asmlinkage void handle_ri(void);
-extern asmlinkage void handle_ri_rdhwr_vivt(void);
+extern asmlinkage void handle_ri_rdhwr_tlbp(void);
 extern asmlinkage void handle_ri_rdhwr(void);
 extern asmlinkage void handle_cpu(void);
 extern asmlinkage void handle_ov(void);
@@ -2352,9 +2352,18 @@ void __init trap_init(void)
 
 	set_except_vector(EXCCODE_SYS, handle_sys);
 	set_except_vector(EXCCODE_BP, handle_bp);
-	set_except_vector(EXCCODE_RI, rdhwr_noopt ? handle_ri :
-			  (cpu_has_vtag_icache ?
-			   handle_ri_rdhwr_vivt : handle_ri_rdhwr));
+
+	if (rdhwr_noopt)
+		set_except_vector(EXCCODE_RI, handle_ri);
+	else {
+		if (cpu_has_vtag_icache)
+			set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp);
+		else if (current_cpu_type() == CPU_LOONGSON3)
+			set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp);
+		else
+			set_except_vector(EXCCODE_RI, handle_ri_rdhwr);
+	}
+
 	set_except_vector(EXCCODE_CPU, handle_cpu);
 	set_except_vector(EXCCODE_OV, handle_ov);
 	set_except_vector(EXCCODE_TR, handle_tr);

[PATCH 4.9 051/152] MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 033cffeedbd11c140952b98e8639bf652091a17d upstream.

Loongson-3A R2 and newer CPU have FTLB, but Config0.MT is 1, so add
MIPS_CPU_FTLB to the CPU options.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/cpu-probe.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1824,7 +1824,7 @@ static inline void cpu_probe_loongson(st
 		}
 
 		decode_configs(c);
-		c->options |= MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
+		c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
 		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		break;
 	default:

[PATCH 4.9 052/152] MIPS: Flush wrong invalid FTLB entry for huge page

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 0115f6cbf26663c86496bc56eeea293f85b77897 upstream.

On VTLB+FTLB platforms (such as Loongson-3A R2), FTLB's pagesize is
usually configured the same as PAGE_SIZE. In such a case, Huge page
entry is not suitable to write in FTLB.

Unfortunately, when a huge page is created, its page table entries
haven't created immediately. Then the TLB refill handler will fetch an
invalid page table entry which has no "HUGE" bit, and this entry may be
written to FTLB. Since it is invalid, TLB load/store handler will then
use tlbwi to write the valid entry at the same place. However, the
valid entry is a huge page entry which isn't suitable for FTLB.

Our solution is to modify build_huge_handler_tail. Flush the invalid
old entry (whether it is in FTLB or VTLB, this is in order to reduce
branches) and use tlbwr to write the valid new entry.

Signed-off-by: Rui Wang <wangr@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15754/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/tlbex.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -762,7 +762,8 @@ static void build_huge_update_entries(u3
 static void build_huge_handler_tail(u32 **p, struct uasm_reloc **r,
 				    struct uasm_label **l,
 				    unsigned int pte,
-				    unsigned int ptr)
+				    unsigned int ptr,
+				    unsigned int flush)
 {
 #ifdef CONFIG_SMP
 	UASM_i_SC(p, pte, 0, ptr);
@@ -771,6 +772,22 @@ static void build_huge_handler_tail(u32
 #else
 	UASM_i_SW(p, pte, 0, ptr);
 #endif
+	if (cpu_has_ftlb && flush) {
+		BUG_ON(!cpu_has_tlbinv);
+
+		UASM_i_MFC0(p, ptr, C0_ENTRYHI);
+		uasm_i_ori(p, ptr, ptr, MIPS_ENTRYHI_EHINV);
+		UASM_i_MTC0(p, ptr, C0_ENTRYHI);
+		build_tlb_write_entry(p, l, r, tlb_indexed);
+
+		uasm_i_xori(p, ptr, ptr, MIPS_ENTRYHI_EHINV);
+		UASM_i_MTC0(p, ptr, C0_ENTRYHI);
+		build_huge_update_entries(p, pte, ptr);
+		build_huge_tlb_write_entry(p, l, r, pte, tlb_random, 0);
+
+		return;
+	}
+
 	build_huge_update_entries(p, pte, ptr);
 	build_huge_tlb_write_entry(p, l, r, pte, tlb_indexed, 0);
 }
@@ -2197,7 +2214,7 @@ static void build_r4000_tlb_load_handler
 		uasm_l_tlbl_goaround2(&l, p);
 	}
 	uasm_i_ori(&p, wr.r1, wr.r1, (_PAGE_ACCESSED | _PAGE_VALID));
-	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 1);
 #endif
 
 	uasm_l_nopage_tlbl(&l, p);
@@ -2252,7 +2269,7 @@ static void build_r4000_tlb_store_handle
 	build_tlb_probe_entry(&p);
 	uasm_i_ori(&p, wr.r1, wr.r1,
 		   _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
-	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 1);
 #endif
 
 	uasm_l_nopage_tlbs(&l, p);
@@ -2308,7 +2325,7 @@ static void build_r4000_tlb_modify_handl
 	build_tlb_probe_entry(&p);
 	uasm_i_ori(&p, wr.r1, wr.r1,
 		   _PAGE_ACCESSED | _PAGE_MODIFIED | _PAGE_VALID | _PAGE_DIRTY);
-	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2);
+	build_huge_handler_tail(&p, &r, &l, wr.r1, wr.r2, 0);
 #endif
 
 	uasm_l_nopage_tlbm(&l, p);

[PATCH 4.9 053/152] MIPS: c-r4k: Fix Loongson-3s vcache/scache waysize calculation

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Huacai Chen <chenhc@lemote.com>

commit 0be032c190abcdcfa948082b6a1e0d461184ba4d upstream.

If scache.waysize is 0, r4k___flush_cache_all() will do nothing and
then cause bugs. BTW, though vcache.waysize isn't being used by now,
we also fix its calculation.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15756/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/mm/c-r4k.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1558,6 +1558,7 @@ static void probe_vcache(void)
 	vcache_size = c->vcache.sets * c->vcache.ways * c->vcache.linesz;
 
 	c->vcache.waybit = 0;
+	c->vcache.waysize = vcache_size / c->vcache.ways;
 
 	pr_info("Unified victim cache %ldkB %s, linesize %d bytes.\n",
 		vcache_size >> 10, way_string[c->vcache.ways], c->vcache.linesz);
@@ -1660,6 +1661,7 @@ static void __init loongson3_sc_init(voi
 	/* Loongson-3 has 4 cores, 1MB scache for each. scaches are shared */
 	scache_size *= 4;
 	c->scache.waybit = 0;
+	c->scache.waysize = scache_size / c->scache.ways;
 	pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
 	       scache_size >> 10, way_string[c->scache.ways], c->scache.linesz);
 	if (scache_size)

[PATCH 4.9 054/152] Documentation: stable-kernel-rules: fix stable-tag format

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit cf903e9d3a97f89b224d2d07be37c0f160db8192 upstream.

A patch documenting how to specify which kernels a particular fix should
be backported to (seemingly) inadvertently added a minus sign after the
kernel version. This particular stable-tag format had never been used
prior to this patch, and was neither present when the patch in question
was first submitted (it was added in v2 without any comment).

Drop the minus sign to avoid any confusion.

Fixes: fdc81b7910ad ("stable_kernel_rules: Add clause about specification of kernel versions to patch.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/stable_kernel_rules.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -124,7 +124,7 @@ specified in the following format in the
 
 .. code-block:: none
 
-     Cc: <stable@vger.kernel.org> # 3.3.x-
+     Cc: <stable@vger.kernel.org> # 3.3.x
 
 The tag has the meaning of:
 

[PATCH 4.9 055/152] mm/mempolicy.c: fix error handling in set_mempolicy and mbind.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Salls <salls@cs.ucsb.edu>

commit cf01fb9985e8deb25ccf0ea54d916b8871ae0e62 upstream.

In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.

Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mempolicy.c |   20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1524,7 +1524,6 @@ COMPAT_SYSCALL_DEFINE5(get_mempolicy, in
 COMPAT_SYSCALL_DEFINE3(set_mempolicy, int, mode, compat_ulong_t __user *, nmask,
 		       compat_ulong_t, maxnode)
 {
-	long err = 0;
 	unsigned long __user *nm = NULL;
 	unsigned long nr_bits, alloc_size;
 	DECLARE_BITMAP(bm, MAX_NUMNODES);
@@ -1533,14 +1532,13 @@ COMPAT_SYSCALL_DEFINE3(set_mempolicy, in
 	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
 
 	if (nmask) {
-		err = compat_get_bitmap(bm, nmask, nr_bits);
+		if (compat_get_bitmap(bm, nmask, nr_bits))
+			return -EFAULT;
 		nm = compat_alloc_user_space(alloc_size);
-		err |= copy_to_user(nm, bm, alloc_size);
+		if (copy_to_user(nm, bm, alloc_size))
+			return -EFAULT;
 	}
 
-	if (err)
-		return -EFAULT;
-
 	return sys_set_mempolicy(mode, nm, nr_bits+1);
 }
 
@@ -1548,7 +1546,6 @@ COMPAT_SYSCALL_DEFINE6(mbind, compat_ulo
 		       compat_ulong_t, mode, compat_ulong_t __user *, nmask,
 		       compat_ulong_t, maxnode, compat_ulong_t, flags)
 {
-	long err = 0;
 	unsigned long __user *nm = NULL;
 	unsigned long nr_bits, alloc_size;
 	nodemask_t bm;
@@ -1557,14 +1554,13 @@ COMPAT_SYSCALL_DEFINE6(mbind, compat_ulo
 	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
 
 	if (nmask) {
-		err = compat_get_bitmap(nodes_addr(bm), nmask, nr_bits);
+		if (compat_get_bitmap(nodes_addr(bm), nmask, nr_bits))
+			return -EFAULT;
 		nm = compat_alloc_user_space(alloc_size);
-		err |= copy_to_user(nm, nodes_addr(bm), alloc_size);
+		if (copy_to_user(nm, nodes_addr(bm), alloc_size))
+			return -EFAULT;
 	}
 
-	if (err)
-		return -EFAULT;
-
 	return sys_mbind(start, len, mode, nm, nr_bits+1, flags);
 }
 

[PATCH 4.9 056/152] random: use chacha20 for get_random_int/long

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit f5b98461cb8167ba362ad9f74c41d126b7becea7 upstream.

Now that our crng uses chacha20, we can rely on its speedy
characteristics for replacing MD5, while simultaneously achieving a
higher security guarantee. Before the idea was to use these functions if
you wanted random integers that aren't stupidly insecure but aren't
necessarily secure either, a vague gray zone, that hopefully was "good
enough" for its users. With chacha20, we can strengthen this claim,
since either we're using an rdrand-like instruction, or we're using the
same crng as /dev/urandom. And it's faster than what was before.

We could have chosen to replace this with a SipHash-derived function,
which might be slightly faster, but at the cost of having yet another
RNG construction in the kernel. By moving to chacha20, we have a single
RNG to analyze and verify, and we also already get good performance
improvements on all platforms.

Implementation-wise, rather than use a generic buffer for both
get_random_int/long and memcpy based on the size needs, we use a
specific buffer for 32-bit reads and for 64-bit reads. This way, we're
guaranteed to always have aligned accesses on all platforms. While
slightly more verbose in C, the assembly this generates is a lot
simpler than otherwise.

Finally, on 32-bit platforms where longs and ints are the same size,
we simply alias get_random_int to get_random_long.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/random.c  |   84 +++++++++++++++++++++++++------------------------
 include/linux/random.h |    1 
 init/main.c            |    1 
 3 files changed, 43 insertions(+), 43 deletions(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -2042,63 +2042,65 @@ struct ctl_table random_table[] = {
 };
 #endif 	/* CONFIG_SYSCTL */
 
-static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned;
-
-int random_int_secret_init(void)
-{
-	get_random_bytes(random_int_secret, sizeof(random_int_secret));
-	return 0;
-}
-
-static DEFINE_PER_CPU(__u32 [MD5_DIGEST_WORDS], get_random_int_hash)
-		__aligned(sizeof(unsigned long));
+struct batched_entropy {
+	union {
+		unsigned long entropy_long[CHACHA20_BLOCK_SIZE / sizeof(unsigned long)];
+		unsigned int entropy_int[CHACHA20_BLOCK_SIZE / sizeof(unsigned int)];
+	};
+	unsigned int position;
+};
 
 /*
- * Get a random word for internal kernel use only. Similar to urandom but
- * with the goal of minimal entropy pool depletion. As a result, the random
- * value is not cryptographically secure but for several uses the cost of
- * depleting entropy is too high
+ * Get a random word for internal kernel use only. The quality of the random
+ * number is either as good as RDRAND or as good as /dev/urandom, with the
+ * goal of being quite fast and not depleting entropy.
  */
-unsigned int get_random_int(void)
+static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_long);
+unsigned long get_random_long(void)
 {
-	__u32 *hash;
-	unsigned int ret;
+	unsigned long ret;
+	struct batched_entropy *batch;
 
-	if (arch_get_random_int(&ret))
+	if (arch_get_random_long(&ret))
 		return ret;
 
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = hash[0];
-	put_cpu_var(get_random_int_hash);
-
+	batch = &get_cpu_var(batched_entropy_long);
+	if (batch->position % ARRAY_SIZE(batch->entropy_long) == 0) {
+		extract_crng((u8 *)batch->entropy_long);
+		batch->position = 0;
+	}
+	ret = batch->entropy_long[batch->position++];
+	put_cpu_var(batched_entropy_long);
 	return ret;
 }
-EXPORT_SYMBOL(get_random_int);
+EXPORT_SYMBOL(get_random_long);
 
-/*
- * Same as get_random_int(), but returns unsigned long.
- */
-unsigned long get_random_long(void)
+#if BITS_PER_LONG == 32
+unsigned int get_random_int(void)
 {
-	__u32 *hash;
-	unsigned long ret;
+	return get_random_long();
+}
+#else
+static DEFINE_PER_CPU(struct batched_entropy, batched_entropy_int);
+unsigned int get_random_int(void)
+{
+	unsigned int ret;
+	struct batched_entropy *batch;
 
-	if (arch_get_random_long(&ret))
+	if (arch_get_random_int(&ret))
 		return ret;
 
-	hash = get_cpu_var(get_random_int_hash);
-
-	hash[0] += current->pid + jiffies + random_get_entropy();
-	md5_transform(hash, random_int_secret);
-	ret = *(unsigned long *)hash;
-	put_cpu_var(get_random_int_hash);
-
+	batch = &get_cpu_var(batched_entropy_int);
+	if (batch->position % ARRAY_SIZE(batch->entropy_int) == 0) {
+		extract_crng((u8 *)batch->entropy_int);
+		batch->position = 0;
+	}
+	ret = batch->entropy_int[batch->position++];
+	put_cpu_var(batched_entropy_int);
 	return ret;
 }
-EXPORT_SYMBOL(get_random_long);
+#endif
+EXPORT_SYMBOL(get_random_int);
 
 /**
  * randomize_page - Generate a random, page aligned address
--- a/include/linux/random.h
+++ b/include/linux/random.h
@@ -37,7 +37,6 @@ extern void get_random_bytes(void *buf,
 extern int add_random_ready_callback(struct random_ready_callback *rdy);
 extern void del_random_ready_callback(struct random_ready_callback *rdy);
 extern void get_random_bytes_arch(void *buf, int nbytes);
-extern int random_int_secret_init(void);
 
 #ifndef MODULE
 extern const struct file_operations random_fops, urandom_fops;
--- a/init/main.c
+++ b/init/main.c
@@ -868,7 +868,6 @@ static void __init do_basic_setup(void)
 	do_ctors();
 	usermodehelper_enable();
 	do_initcalls();
-	random_int_secret_init();
 }
 
 static void __init do_pre_smp_initcalls(void)

[PATCH 4.9 057/152] drm/sun4i: tcon: Move SoC specific quirks to a DT matched data structure

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@csie.org>

commit 91ea2f29cba6a7fe035ea232e4f981211a9fce5d upstream.

We already have some differences between the 2 supported SoCs.
More will be added as we support other SoCs. To avoid bloating
the probe function with even more conditionals, move the quirks
to a separate data structure that's tied to the compatible string.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/sun4i/sun4i_tcon.c |   33 ++++++++++++++++++---------------
 drivers/gpu/drm/sun4i/sun4i_tcon.h |   11 +++++++----
 2 files changed, 25 insertions(+), 19 deletions(-)

--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -20,6 +20,7 @@
 #include <linux/component.h>
 #include <linux/ioport.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/of_irq.h>
 #include <linux/regmap.h>
@@ -62,7 +63,7 @@ void sun4i_tcon_channel_disable(struct s
 		return;
 	}
 
-	WARN_ON(!tcon->has_channel_1);
+	WARN_ON(!tcon->quirks->has_channel_1);
 	regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
 			   SUN4I_TCON1_CTL_TCON_ENABLE, 0);
 	clk_disable_unprepare(tcon->sclk1);
@@ -80,7 +81,7 @@ void sun4i_tcon_channel_enable(struct su
 		return;
 	}
 
-	WARN_ON(!tcon->has_channel_1);
+	WARN_ON(!tcon->quirks->has_channel_1);
 	regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
 			   SUN4I_TCON1_CTL_TCON_ENABLE,
 			   SUN4I_TCON1_CTL_TCON_ENABLE);
@@ -202,7 +203,7 @@ void sun4i_tcon1_mode_set(struct sun4i_t
 	u8 clk_delay;
 	u32 val;
 
-	WARN_ON(!tcon->has_channel_1);
+	WARN_ON(!tcon->quirks->has_channel_1);
 
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 1);
@@ -266,7 +267,7 @@ void sun4i_tcon1_mode_set(struct sun4i_t
 	/*
 	 * FIXME: Undocumented bits
 	 */
-	if (tcon->has_mux)
+	if (tcon->quirks->has_unknown_mux)
 		regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, 1);
 }
 EXPORT_SYMBOL(sun4i_tcon1_mode_set);
@@ -327,7 +328,7 @@ static int sun4i_tcon_init_clocks(struct
 		return PTR_ERR(tcon->sclk0);
 	}
 
-	if (tcon->has_channel_1) {
+	if (tcon->quirks->has_channel_1) {
 		tcon->sclk1 = devm_clk_get(dev, "tcon-ch1");
 		if (IS_ERR(tcon->sclk1)) {
 			dev_err(dev, "Couldn't get the TCON channel 1 clock\n");
@@ -487,14 +488,7 @@ static int sun4i_tcon_bind(struct device
 	drv->tcon = tcon;
 	tcon->drm = drm;
 	tcon->dev = dev;
-
-	if (of_device_is_compatible(dev->of_node, "allwinner,sun5i-a13-tcon")) {
-		tcon->has_mux = true;
-		tcon->has_channel_1 = true;
-	} else {
-		tcon->has_mux = false;
-		tcon->has_channel_1 = false;
-	}
+	tcon->quirks = of_device_get_match_data(dev);
 
 	tcon->lcd_rst = devm_reset_control_get(dev, "lcd");
 	if (IS_ERR(tcon->lcd_rst)) {
@@ -588,9 +582,18 @@ static int sun4i_tcon_remove(struct plat
 	return 0;
 }
 
+static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
+	.has_unknown_mux = true,
+	.has_channel_1	= true,
+};
+
+static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
+	/* nothing is supported */
+};
+
 static const struct of_device_id sun4i_tcon_of_table[] = {
-	{ .compatible = "allwinner,sun5i-a13-tcon" },
-	{ .compatible = "allwinner,sun8i-a33-tcon" },
+	{ .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
+	{ .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_tcon_of_table);
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -142,6 +142,11 @@
 
 #define SUN4I_TCON_MAX_CHANNELS		2
 
+struct sun4i_tcon_quirks {
+	bool	has_unknown_mux; /* sun5i has undocumented mux */
+	bool	has_channel_1;	/* a33 does not have channel 1 */
+};
+
 struct sun4i_tcon {
 	struct device			*dev;
 	struct drm_device		*drm;
@@ -160,12 +165,10 @@ struct sun4i_tcon {
 	/* Reset control */
 	struct reset_control		*lcd_rst;
 
-	/* Platform adjustments */
-	bool				has_mux;
-
 	struct drm_panel		*panel;
 
-	bool				has_channel_1;
+	/* Platform adjustments */
+	const struct sun4i_tcon_quirks	*quirks;
 };
 
 struct drm_bridge *sun4i_tcon_find_bridge(struct device_node *node);

[PATCH 4.9 058/152] drm/sun4i: Add compatible strings for A31/A31s display pipelines

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@csie.org>

commit 49c440e87cd6f547f93d0dc53571ae0e11d9ec8f upstream.

The A31's display pipeline has 2 frontends, 2 backends, and 2 TCONs. It
also has new display enhancement blocks, such as the DRC (Dynamic Range
Controller), the DEU (Display Enhancement Unit), and the CMU (Color
Management Unit). It supports HDMI, MIPI DSI, and 2 LCD/LVDS channels.

The A31s display pipeline is almost the same, just without MIPI DSI.
Only the TCON seems to be different, due to the missing mux for MIPI
DSI.

Add compatible strings for both of them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt |    4 ++++
 drivers/gpu/drm/sun4i/sun4i_backend.c                         |    1 +
 drivers/gpu/drm/sun4i/sun4i_drv.c                             |    3 +++
 3 files changed, 8 insertions(+)

--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -87,6 +87,7 @@ system.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a13-display-backend
+    * allwinner,sun6i-a31-display-backend
     * allwinner,sun8i-a33-display-backend
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the frontend and backend
@@ -117,6 +118,7 @@ deinterlacing and color space conversion
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a13-display-frontend
+    * allwinner,sun6i-a31-display-frontend
     * allwinner,sun8i-a33-display-frontend
   - reg: base address and size of the memory-mapped region.
   - interrupts: interrupt associated to this IP
@@ -142,6 +144,8 @@ extra node.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a13-display-engine
+    * allwinner,sun6i-a31-display-engine
+    * allwinner,sun6i-a31s-display-engine
     * allwinner,sun8i-a33-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
--- a/drivers/gpu/drm/sun4i/sun4i_backend.c
+++ b/drivers/gpu/drm/sun4i/sun4i_backend.c
@@ -408,6 +408,7 @@ static int sun4i_backend_remove(struct p
 
 static const struct of_device_id sun4i_backend_of_table[] = {
 	{ .compatible = "allwinner,sun5i-a13-display-backend" },
+	{ .compatible = "allwinner,sun6i-a31-display-backend" },
 	{ .compatible = "allwinner,sun8i-a33-display-backend" },
 	{ }
 };
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -201,6 +201,7 @@ static const struct component_master_ops
 static bool sun4i_drv_node_is_frontend(struct device_node *node)
 {
 	return of_device_is_compatible(node, "allwinner,sun5i-a13-display-frontend") ||
+		of_device_is_compatible(node, "allwinner,sun6i-a31-display-frontend") ||
 		of_device_is_compatible(node, "allwinner,sun8i-a33-display-frontend");
 }
 
@@ -322,6 +323,8 @@ static int sun4i_drv_remove(struct platf
 
 static const struct of_device_id sun4i_drv_of_table[] = {
 	{ .compatible = "allwinner,sun5i-a13-display-engine" },
+	{ .compatible = "allwinner,sun6i-a31-display-engine" },
+	{ .compatible = "allwinner,sun6i-a31s-display-engine" },
 	{ .compatible = "allwinner,sun8i-a33-display-engine" },
 	{ }
 };

[PATCH 4.9 059/152] drm/sun4i: Add compatible string for A31/A31s TCON (timing controller)

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@csie.org>

commit 93a5ec14da24a8abbac5bcb953b45cc7a5d0198a upstream.

The A31 TCON has mux controls for how TCON outputs are routed to the
HDMI and MIPI DSI blocks.

Since the A31s does not have MIPI DSI, it only has a mux for the HDMI
controller input.

This patch only adds support for the compatible strings. Actual support
for the mux controls should be added with HDMI and MIPI DSI support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt |    4 +++-
 drivers/gpu/drm/sun4i/sun4i_drv.c                             |    2 ++
 drivers/gpu/drm/sun4i/sun4i_tcon.c                            |   10 ++++++++++
 3 files changed, 15 insertions(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -28,6 +28,8 @@ The TCON acts as a timing controller for
 Required properties:
  - compatible: value must be either:
    * allwinner,sun5i-a13-tcon
+   * allwinner,sun6i-a31-tcon
+   * allwinner,sun6i-a31s-tcon
    * allwinner,sun8i-a33-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
@@ -50,7 +52,7 @@ Required properties:
   second the block connected to the TCON channel 1 (usually the TV
   encoder)
 
-On the A13, there is one more clock required:
+On SoCs other than the A33, there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1
 
 DRC
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -208,6 +208,8 @@ static bool sun4i_drv_node_is_frontend(s
 static bool sun4i_drv_node_is_tcon(struct device_node *node)
 {
 	return of_device_is_compatible(node, "allwinner,sun5i-a13-tcon") ||
+		of_device_is_compatible(node, "allwinner,sun6i-a31-tcon") ||
+		of_device_is_compatible(node, "allwinner,sun6i-a31s-tcon") ||
 		of_device_is_compatible(node, "allwinner,sun8i-a33-tcon");
 }
 
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -587,12 +587,22 @@ static const struct sun4i_tcon_quirks su
 	.has_channel_1	= true,
 };
 
+static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
+	.has_channel_1	= true,
+};
+
+static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
+	.has_channel_1	= true,
+};
+
 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
 	/* nothing is supported */
 };
 
 static const struct of_device_id sun4i_tcon_of_table[] = {
 	{ .compatible = "allwinner,sun5i-a13-tcon", .data = &sun5i_a13_quirks },
+	{ .compatible = "allwinner,sun6i-a31-tcon", .data = &sun6i_a31_quirks },
+	{ .compatible = "allwinner,sun6i-a31s-tcon", .data = &sun6i_a31s_quirks },
 	{ .compatible = "allwinner,sun8i-a33-tcon", .data = &sun8i_a33_quirks },
 	{ }
 };

[PATCH 4.9 060/152] clk: lpc32xx: add a quirk for PWM and MS clock dividers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vladimir Zapolskiy <vz@mleia.com>

[ Upstream commit f84d42a9cffc4ecd96f1ce3a038f841782142eb2 ]

In common clock framework CLK_DIVIDER_ONE_BASED or'ed with
CLK_DIVIDER_ALLOW_ZERO flags indicates that
1) a divider clock may be set to zero value,
2) divider's zero value is interpreted as a non-divided clock.

On the LPC32xx platform clock dividers of PWM and memory card clocks
comply with the first condition, but zero value means a gated clock,
thus it may happen that the divider value is not updated when
the clock is enabled and the clock remains gated.

The change adds one-shot quirks, which check for zero value of divider
on initialization and set it to a non-zero value, therefore in runtime
a gate clock will work as expected.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/clk/nxp/clk-lpc32xx.c |   32 ++++++++++++++++++++++++++++----
 1 file changed, 28 insertions(+), 4 deletions(-)

--- a/drivers/clk/nxp/clk-lpc32xx.c
+++ b/drivers/clk/nxp/clk-lpc32xx.c
@@ -1282,13 +1282,13 @@ static struct clk_hw_proto clk_hw_proto[
 
 	LPC32XX_DEFINE_MUX(PWM1_MUX, PWMCLK_CTRL, 1, 0x1, NULL, 0),
 	LPC32XX_DEFINE_DIV(PWM1_DIV, PWMCLK_CTRL, 4, 4, NULL,
-			   CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO),
+			   CLK_DIVIDER_ONE_BASED),
 	LPC32XX_DEFINE_GATE(PWM1_GATE, PWMCLK_CTRL, 0, 0),
 	LPC32XX_DEFINE_COMPOSITE(PWM1, PWM1_MUX, PWM1_DIV, PWM1_GATE),
 
 	LPC32XX_DEFINE_MUX(PWM2_MUX, PWMCLK_CTRL, 3, 0x1, NULL, 0),
 	LPC32XX_DEFINE_DIV(PWM2_DIV, PWMCLK_CTRL, 8, 4, NULL,
-			   CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO),
+			   CLK_DIVIDER_ONE_BASED),
 	LPC32XX_DEFINE_GATE(PWM2_GATE, PWMCLK_CTRL, 2, 0),
 	LPC32XX_DEFINE_COMPOSITE(PWM2, PWM2_MUX, PWM2_DIV, PWM2_GATE),
 
@@ -1335,8 +1335,7 @@ static struct clk_hw_proto clk_hw_proto[
 	LPC32XX_DEFINE_GATE(USB_DIV_GATE, USB_CTRL, 17, 0),
 	LPC32XX_DEFINE_COMPOSITE(USB_DIV, _NULL, USB_DIV_DIV, USB_DIV_GATE),
 
-	LPC32XX_DEFINE_DIV(SD_DIV, MS_CTRL, 0, 4, NULL,
-			   CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO),
+	LPC32XX_DEFINE_DIV(SD_DIV, MS_CTRL, 0, 4, NULL, CLK_DIVIDER_ONE_BASED),
 	LPC32XX_DEFINE_CLK(SD_GATE, MS_CTRL, BIT(5) | BIT(9), BIT(5) | BIT(9),
 			   0x0, BIT(5) | BIT(9), 0x0, 0x0, clk_mask_ops),
 	LPC32XX_DEFINE_COMPOSITE(SD, _NULL, SD_DIV, SD_GATE),
@@ -1478,6 +1477,20 @@ static struct clk * __init lpc32xx_clk_r
 	return clk;
 }
 
+static void __init lpc32xx_clk_div_quirk(u32 reg, u32 div_mask, u32 gate)
+{
+	u32 val;
+
+	regmap_read(clk_regmap, reg, &val);
+
+	if (!(val & div_mask)) {
+		val &= ~gate;
+		val |= BIT(__ffs(div_mask));
+	}
+
+	regmap_update_bits(clk_regmap, reg, gate | div_mask, val);
+}
+
 static void __init lpc32xx_clk_init(struct device_node *np)
 {
 	unsigned int i;
@@ -1517,6 +1530,17 @@ static void __init lpc32xx_clk_init(stru
 		return;
 	}
 
+	/*
+	 * Divider part of PWM and MS clocks requires a quirk to avoid
+	 * a misinterpretation of formally valid zero value in register
+	 * bitfield, which indicates another clock gate. Instead of
+	 * adding complexity to a gate clock ensure that zero value in
+	 * divider clock is never met in runtime.
+	 */
+	lpc32xx_clk_div_quirk(LPC32XX_CLKPWR_PWMCLK_CTRL, 0xf0, BIT(0));
+	lpc32xx_clk_div_quirk(LPC32XX_CLKPWR_PWMCLK_CTRL, 0xf00, BIT(2));
+	lpc32xx_clk_div_quirk(LPC32XX_CLKPWR_MS_CTRL, 0xf, BIT(5) | BIT(9));
+
 	for (i = 1; i < LPC32XX_CLK_MAX; i++) {
 		clk[i] = lpc32xx_clk_register(i);
 		if (IS_ERR(clk[i])) {

[PATCH 4.9 061/152] HID: usbhid: Add quirks for Mayflash/Dragonrise GameCube and PS3 adapters

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcel Hasler <mahasler@gmail.com>

[ Upstream commit b2554000f5b5d2a3a368d09c6debf7da64901fcf ]

All known gamepad adapters by Mayflash (identified as Dragonrise) need
HID_QUIRK_MULTI_INPUT to split them up into four input devices. Without this
quirk those adapters are falsely recognized as tablets. Fixes bug 115841
(https://bugzilla.kernel.org/show_bug.cgi?id=115841).

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-ids.h           |    6 ++++--
 drivers/hid/usbhid/hid-quirks.c |    2 ++
 2 files changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -318,8 +318,10 @@
 #define USB_VENDOR_ID_DMI		0x0c0b
 #define USB_DEVICE_ID_DMI_ENC		0x5fab
 
-#define USB_VENDOR_ID_DRAGONRISE	0x0079
-#define USB_DEVICE_ID_DRAGONRISE_WIIU	0x1800
+#define USB_VENDOR_ID_DRAGONRISE		0x0079
+#define USB_DEVICE_ID_DRAGONRISE_WIIU		0x1800
+#define USB_DEVICE_ID_DRAGONRISE_PS3		0x1801
+#define USB_DEVICE_ID_DRAGONRISE_GAMECUBE	0x1843
 
 #define USB_VENDOR_ID_DWAV		0x0eef
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -83,6 +83,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },

[PATCH 4.9 062/152] HID: i2c-hid: add a simple quirk to fix device defects

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: HungNien Chen <hn.chen@weidahitech.com>

[ Upstream commit 71af01a8c85ad89449209594133bdfdfaa9f1e2a ]

Certain devices produced by Weida Tech need to have a wakeup command sent to
them before powering on. The call itself will come back with error, but the
device can be powered on afterwards.

[jkosina@suse.cz: rewrite changelog]
[jkosina@suse.cz: remove unused device ID addition]
Signed-off-by: HungNien Chen <hn.chen@weidahitech.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-ids.h         |    4 ++
 drivers/hid/i2c-hid/i2c-hid.c |   57 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 61 insertions(+)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1039,6 +1039,10 @@
 #define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH	0x0500
 #define USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET	0x0502
 
+#define	USB_VENDOR_ID_WEIDA		0x2575
+#define	USB_DEVICE_ID_WEIDA_8752	0xC300
+#define	USB_DEVICE_ID_WEIDA_8755	0xC301
+
 #define USB_VENDOR_ID_WISEGROUP		0x0925
 #define USB_DEVICE_ID_SMARTJOY_PLUS	0x0005
 #define USB_DEVICE_ID_SUPER_JOY_BOX_3	0x8888
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -41,6 +41,11 @@
 
 #include <linux/i2c/i2c-hid.h>
 
+#include "../hid-ids.h"
+
+/* quirks to control the device */
+#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
+
 /* flags */
 #define I2C_HID_STARTED		0
 #define I2C_HID_RESET_PENDING	1
@@ -143,6 +148,7 @@ struct i2c_hid {
 	char			*argsbuf;	/* Command arguments buffer */
 
 	unsigned long		flags;		/* device flags */
+	unsigned long		quirks;		/* Various quirks */
 
 	wait_queue_head_t	wait;		/* For waiting the interrupt */
 	struct gpio_desc	*desc;
@@ -154,6 +160,39 @@ struct i2c_hid {
 	struct mutex		reset_lock;
 };
 
+static const struct i2c_hid_quirks {
+	__u16 idVendor;
+	__u16 idProduct;
+	__u32 quirks;
+} i2c_hid_quirks[] = {
+	{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8752,
+		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
+	{ USB_VENDOR_ID_WEIDA, USB_DEVICE_ID_WEIDA_8755,
+		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
+	{ 0, 0 }
+};
+
+/*
+ * i2c_hid_lookup_quirk: return any quirks associated with a I2C HID device
+ * @idVendor: the 16-bit vendor ID
+ * @idProduct: the 16-bit product ID
+ *
+ * Returns: a u32 quirks value.
+ */
+static u32 i2c_hid_lookup_quirk(const u16 idVendor, const u16 idProduct)
+{
+	u32 quirks = 0;
+	int n;
+
+	for (n = 0; i2c_hid_quirks[n].idVendor; n++)
+		if (i2c_hid_quirks[n].idVendor == idVendor &&
+		    (i2c_hid_quirks[n].idProduct == (__u16)HID_ANY_ID ||
+		     i2c_hid_quirks[n].idProduct == idProduct))
+			quirks = i2c_hid_quirks[n].quirks;
+
+	return quirks;
+}
+
 static int __i2c_hid_command(struct i2c_client *client,
 		const struct i2c_hid_cmd *command, u8 reportID,
 		u8 reportType, u8 *args, int args_len,
@@ -346,11 +385,27 @@ static int i2c_hid_set_power(struct i2c_
 
 	i2c_hid_dbg(ihid, "%s\n", __func__);
 
+	/*
+	 * Some devices require to send a command to wakeup before power on.
+	 * The call will get a return value (EREMOTEIO) but device will be
+	 * triggered and activated. After that, it goes like a normal device.
+	 */
+	if (power_state == I2C_HID_PWR_ON &&
+	    ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
+		ret = i2c_hid_command(client, &hid_set_power_cmd, NULL, 0);
+
+		/* Device was already activated */
+		if (!ret)
+			goto set_pwr_exit;
+	}
+
 	ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
 		0, NULL, 0, NULL, 0);
+
 	if (ret)
 		dev_err(&client->dev, "failed to change power setting.\n");
 
+set_pwr_exit:
 	return ret;
 }
 
@@ -1050,6 +1105,8 @@ static int i2c_hid_probe(struct i2c_clie
 		 client->name, hid->vendor, hid->product);
 	strlcpy(hid->phys, dev_name(&client->dev), sizeof(hid->phys));
 
+	ihid->quirks = i2c_hid_lookup_quirk(hid->vendor, hid->product);
+
 	ret = hid_add_device(hid);
 	if (ret) {
 		if (ret != -ENODEV)

[PATCH 4.9 063/152] usb: dwc3: gadget: delay unmap of bounced requests

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Janusz Dziedzic <januszx.dziedzic@intel.com>

commit de288e36fe33f7e06fa272bc8e2f85aa386d99aa upstream.

In the case of bounced ep0 requests, we must delay DMA operation until
after ->complete() otherwise we might overwrite contents of req->buf.

This caused problems with RNDIS gadget.

Signed-off-by: Janusz Dziedzic <januszx.dziedzic@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/gadget.c |   21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -174,6 +174,7 @@ void dwc3_gadget_giveback(struct dwc3_ep
 		int status)
 {
 	struct dwc3			*dwc = dep->dwc;
+	unsigned int			unmap_after_complete = false;
 
 	req->started = false;
 	list_del(&req->list);
@@ -182,11 +183,19 @@ void dwc3_gadget_giveback(struct dwc3_ep
 	if (req->request.status == -EINPROGRESS)
 		req->request.status = status;
 
-	if (dwc->ep0_bounced && dep->number <= 1)
+	/*
+	 * NOTICE we don't want to unmap before calling ->complete() if we're
+	 * dealing with a bounced ep0 request. If we unmap it here, we would end
+	 * up overwritting the contents of req->buf and this could confuse the
+	 * gadget driver.
+	 */
+	if (dwc->ep0_bounced && dep->number <= 1) {
 		dwc->ep0_bounced = false;
-
-	usb_gadget_unmap_request(&dwc->gadget, &req->request,
-			req->direction);
+		unmap_after_complete = true;
+	} else {
+		usb_gadget_unmap_request(&dwc->gadget,
+				&req->request, req->direction);
+	}
 
 	trace_dwc3_gadget_giveback(req);
 
@@ -194,6 +203,10 @@ void dwc3_gadget_giveback(struct dwc3_ep
 	usb_gadget_giveback_request(&dep->endpoint, &req->request);
 	spin_lock(&dwc->lock);
 
+	if (unmap_after_complete)
+		usb_gadget_unmap_request(&dwc->gadget,
+				&req->request, req->direction);
+
 	if (dep->number > 1)
 		pm_runtime_put(dwc->dev);
 }

[PATCH 4.9 064/152] ASoC: Intel: bytct_rt5640: change default capture settings

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit bf46241bee7bc3ec28703796f4fbd56085055fca ]

Most Baytrail-CR devices use analog differential microphones,
modify capture default to avoid DMI quirks. Keep digital mics
for all other configurations.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c |   11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -57,9 +57,7 @@ struct byt_rt5640_private {
 	struct clk *mclk;
 };
 
-static unsigned long byt_rt5640_quirk = BYT_RT5640_DMIC1_MAP |
-					BYT_RT5640_DMIC_EN |
-					BYT_RT5640_MCLK_EN;
+static unsigned long byt_rt5640_quirk = BYT_RT5640_MCLK_EN;
 
 static void log_quirks(struct device *dev)
 {
@@ -738,6 +736,13 @@ static int snd_byt_rt5640_mc_probe(struc
 		if (res_info->acpi_ipc_irq_index == 0) {
 			byt_rt5640_quirk |= BYT_RT5640_SSP0_AIF2;
 		}
+
+		/* change defaults for Baytrail-CR capture */
+		byt_rt5640_quirk |= BYT_RT5640_IN1_MAP;
+		byt_rt5640_quirk |= BYT_RT5640_DIFF_MIC;
+	} else {
+		byt_rt5640_quirk |= (BYT_RT5640_DMIC1_MAP |
+				BYT_RT5640_DMIC_EN);
 	}
 
 	/* check quirks before creating card */

[PATCH 4.9 065/152] arm64: dts: hisi: fix hip06 sas am-max-trans quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Garry <john.garry@huawei.com>

[ Upstream commit f65e786604b34d0b599b8c01ecca28be2d746290 ]

The string for the am max transmissions quirk property
is not correct -> fix it.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/hisilicon/hip06.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
@@ -590,7 +590,7 @@
 			reg = <0 0xa2000000 0 0x10000>;
 			sas-addr = [50 01 88 20 16 00 00 00];
 			hisilicon,sas-syscon = <&pcie_subctl>;
-			am-max-trans;
+			hip06-sas-v2-quirk-amt;
 			ctrl-reset-reg = <0xa18>;
 			ctrl-reset-sts-reg = <0x5a0c>;
 			ctrl-clock-ena-reg = <0x318>;

[PATCH 4.9 066/152] net/mlx4_core: Use device ID defines

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit c19e4b9037fa8a0477525a64e93847f534e8cc17 ]

We added a bunch of new Mellanox device ID definitions because they'll be
used by INTx quirks.  Use them in the mlx4 ID table also so grep can find
both places.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/main.c |   84 +++++++++++++++---------------
 1 file changed, 43 insertions(+), 41 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -4020,49 +4020,51 @@ int mlx4_restart_one(struct pci_dev *pde
 	return err;
 }
 
+#define MLX_SP(id) { PCI_VDEVICE(MELLANOX, id), MLX4_PCI_DEV_FORCE_SENSE_PORT }
+#define MLX_VF(id) { PCI_VDEVICE(MELLANOX, id), MLX4_PCI_DEV_IS_VF }
+#define MLX_GN(id) { PCI_VDEVICE(MELLANOX, id), 0 }
+
 static const struct pci_device_id mlx4_pci_table[] = {
-	/* MT25408 "Hermon" SDR */
-	{ PCI_VDEVICE(MELLANOX, 0x6340), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25408 "Hermon" DDR */
-	{ PCI_VDEVICE(MELLANOX, 0x634a), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25408 "Hermon" QDR */
-	{ PCI_VDEVICE(MELLANOX, 0x6354), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25408 "Hermon" DDR PCIe gen2 */
-	{ PCI_VDEVICE(MELLANOX, 0x6732), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25408 "Hermon" QDR PCIe gen2 */
-	{ PCI_VDEVICE(MELLANOX, 0x673c), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25408 "Hermon" EN 10GigE */
-	{ PCI_VDEVICE(MELLANOX, 0x6368), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25408 "Hermon" EN 10GigE PCIe gen2 */
-	{ PCI_VDEVICE(MELLANOX, 0x6750), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25458 ConnectX EN 10GBASE-T 10GigE */
-	{ PCI_VDEVICE(MELLANOX, 0x6372), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
-	{ PCI_VDEVICE(MELLANOX, 0x675a), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT26468 ConnectX EN 10GigE PCIe gen2*/
-	{ PCI_VDEVICE(MELLANOX, 0x6764), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */
-	{ PCI_VDEVICE(MELLANOX, 0x6746), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT26478 ConnectX2 40GigE PCIe gen2 */
-	{ PCI_VDEVICE(MELLANOX, 0x676e), MLX4_PCI_DEV_FORCE_SENSE_PORT },
-	/* MT25400 Family [ConnectX-2 Virtual Function] */
-	{ PCI_VDEVICE(MELLANOX, 0x1002), MLX4_PCI_DEV_IS_VF },
+	/* MT25408 "Hermon" */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_SDR),	/* SDR */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_DDR),	/* DDR */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_QDR),	/* QDR */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2), /* DDR Gen2 */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2),	/* QDR Gen2 */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_EN),	/* EN 10GigE */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2),  /* EN 10GigE Gen2 */
+	/* MT25458 ConnectX EN 10GBASE-T */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_CONNECTX_EN),
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2),	/* Gen2 */
+	/* MT26468 ConnectX EN 10GigE PCIe Gen2*/
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2),
+	/* MT26438 ConnectX EN 40GigE PCIe Gen2 5GT/s */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2),
+	/* MT26478 ConnectX2 40GigE PCIe Gen2 */
+	MLX_SP(PCI_DEVICE_ID_MELLANOX_CONNECTX2),
+	/* MT25400 Family [ConnectX-2] */
+	MLX_VF(0x1002),					/* Virtual Function */
 	/* MT27500 Family [ConnectX-3] */
-	{ PCI_VDEVICE(MELLANOX, 0x1003), 0 },
-	/* MT27500 Family [ConnectX-3 Virtual Function] */
-	{ PCI_VDEVICE(MELLANOX, 0x1004), MLX4_PCI_DEV_IS_VF },
-	{ PCI_VDEVICE(MELLANOX, 0x1005), 0 }, /* MT27510 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x1006), 0 }, /* MT27511 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x1007), 0 }, /* MT27520 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x1008), 0 }, /* MT27521 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x1009), 0 }, /* MT27530 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x100a), 0 }, /* MT27531 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x100b), 0 }, /* MT27540 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x100c), 0 }, /* MT27541 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x100d), 0 }, /* MT27550 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x100e), 0 }, /* MT27551 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x100f), 0 }, /* MT27560 Family */
-	{ PCI_VDEVICE(MELLANOX, 0x1010), 0 }, /* MT27561 Family */
+	MLX_GN(PCI_DEVICE_ID_MELLANOX_CONNECTX3),
+	MLX_VF(0x1004),					/* Virtual Function */
+	MLX_GN(0x1005),					/* MT27510 Family */
+	MLX_GN(0x1006),					/* MT27511 Family */
+	MLX_GN(PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO),	/* MT27520 Family */
+	MLX_GN(0x1008),					/* MT27521 Family */
+	MLX_GN(0x1009),					/* MT27530 Family */
+	MLX_GN(0x100a),					/* MT27531 Family */
+	MLX_GN(0x100b),					/* MT27540 Family */
+	MLX_GN(0x100c),					/* MT27541 Family */
+	MLX_GN(0x100d),					/* MT27550 Family */
+	MLX_GN(0x100e),					/* MT27551 Family */
+	MLX_GN(0x100f),					/* MT27560 Family */
+	MLX_GN(0x1010),					/* MT27561 Family */
+
+	/*
+	 * See the mellanox_check_broken_intx_masking() quirk when
+	 * adding devices
+	 */
+
 	{ 0, }
 };
 

[PATCH 4.9 067/152] clocksource/drivers/arm_arch_timer: Dont assume clock runs in suspend

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit d8ec7595a013237f82d965dcf981571aeb41855b ]

The ARM specifies that the system counter "must be implemented in an
always-on power domain," and so we try to use the counter as a source of
timekeeping across suspend/resume. Unfortunately, some SoCs (e.g.,
Rockchip's RK3399) do not keep the counter ticking properly when
switched from their high-power clock to the lower-power clock used in
system suspend. Support this quirk by adding a new device tree property.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/arm/arch_timer.txt |    5 +++++
 drivers/clocksource/arm_arch_timer.c                 |    9 ++++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

--- a/Documentation/devicetree/bindings/arm/arch_timer.txt
+++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
@@ -38,6 +38,11 @@ to deliver its interrupts via SPIs.
   architecturally-defined reset values. Only supported for 32-bit
   systems which follow the ARMv7 architected reset values.
 
+- arm,no-tick-in-suspend : The main counter does not tick when the system is in
+  low-power system suspend on some SoCs. This behavior does not match the
+  Architecture Reference Manual's specification that the system counter "must
+  be implemented in an always-on power domain."
+
 
 Example:
 
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -81,6 +81,7 @@ static struct clock_event_device __percp
 static enum ppi_nr arch_timer_uses_ppi = VIRT_PPI;
 static bool arch_timer_c3stop;
 static bool arch_timer_mem_use_virtual;
+static bool arch_counter_suspend_stop;
 
 static bool evtstrm_enable = IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM);
 
@@ -576,7 +577,7 @@ static struct clocksource clocksource_co
 	.rating	= 400,
 	.read	= arch_counter_read,
 	.mask	= CLOCKSOURCE_MASK(56),
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static struct cyclecounter cyclecounter = {
@@ -616,6 +617,8 @@ static void __init arch_counter_register
 		arch_timer_read_counter = arch_counter_get_cntvct_mem;
 	}
 
+	if (!arch_counter_suspend_stop)
+		clocksource_counter.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
 	start_count = arch_timer_read_counter();
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
 	cyclecounter.mult = clocksource_counter.mult;
@@ -907,6 +910,10 @@ static int __init arch_timer_of_init(str
 	    of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
 		arch_timer_uses_ppi = PHYS_SECURE_PPI;
 
+	/* On some systems, the counter stops ticking when in suspend. */
+	arch_counter_suspend_stop = of_property_read_bool(np,
+							 "arm,no-tick-in-suspend");
+
 	return arch_timer_init();
 }
 CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);

[PATCH 4.9 068/152] scsi: ufs: introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kiwoong Kim <kwmad.kim@samsung.com>

[ Upstream commit 75b1cc4ad63afa28c1a045b5157c008f405f06a9 ]

Some UFS host controllers may think granularities of PRDT length and
offset as bytes, not double words.

Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd.c |   28 +++++++++++++++++++++-------
 drivers/scsi/ufs/ufshcd.h |    6 ++++++
 2 files changed, 27 insertions(+), 7 deletions(-)

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1088,7 +1088,7 @@ ufshcd_send_uic_cmd(struct ufs_hba *hba,
  *
  * Returns 0 in case of success, non-zero value in case of failure
  */
-static int ufshcd_map_sg(struct ufshcd_lrb *lrbp)
+static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 {
 	struct ufshcd_sg_entry *prd_table;
 	struct scatterlist *sg;
@@ -1102,8 +1102,13 @@ static int ufshcd_map_sg(struct ufshcd_l
 		return sg_segments;
 
 	if (sg_segments) {
-		lrbp->utr_descriptor_ptr->prd_table_length =
-					cpu_to_le16((u16) (sg_segments));
+		if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN)
+			lrbp->utr_descriptor_ptr->prd_table_length =
+				cpu_to_le16((u16)(sg_segments *
+					sizeof(struct ufshcd_sg_entry)));
+		else
+			lrbp->utr_descriptor_ptr->prd_table_length =
+				cpu_to_le16((u16) (sg_segments));
 
 		prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr;
 
@@ -1465,7 +1470,7 @@ static int ufshcd_queuecommand(struct Sc
 
 	ufshcd_comp_scsi_upiu(hba, lrbp);
 
-	err = ufshcd_map_sg(lrbp);
+	err = ufshcd_map_sg(hba, lrbp);
 	if (err) {
 		lrbp->cmd = NULL;
 		clear_bit_unlock(tag, &hba->lrb_in_use);
@@ -2320,12 +2325,21 @@ static void ufshcd_host_memory_configure
 				cpu_to_le32(upper_32_bits(cmd_desc_element_addr));
 
 		/* Response upiu and prdt offset should be in double words */
-		utrdlp[i].response_upiu_offset =
+		if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN) {
+			utrdlp[i].response_upiu_offset =
+				cpu_to_le16(response_offset);
+			utrdlp[i].prd_table_offset =
+				cpu_to_le16(prdt_offset);
+			utrdlp[i].response_upiu_length =
+				cpu_to_le16(ALIGNED_UPIU_SIZE);
+		} else {
+			utrdlp[i].response_upiu_offset =
 				cpu_to_le16((response_offset >> 2));
-		utrdlp[i].prd_table_offset =
+			utrdlp[i].prd_table_offset =
 				cpu_to_le16((prdt_offset >> 2));
-		utrdlp[i].response_upiu_length =
+			utrdlp[i].response_upiu_length =
 				cpu_to_le16(ALIGNED_UPIU_SIZE >> 2);
+		}
 
 		hba->lrb[i].utr_descriptor_ptr = (utrdlp + i);
 		hba->lrb[i].ucd_req_ptr =
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -474,6 +474,12 @@ struct ufs_hba {
 	 */
 	#define UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		UFS_BIT(5)
 
+	/*
+	 * This quirk needs to be enabled if the host contoller regards
+	 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
+	 */
+	#define UFSHCD_QUIRK_PRDT_BYTE_GRAN			UFS_BIT(7)
+
 	unsigned int quirks;	/* Deviations from standard UFSHCI spec. */
 
 	/* Device deviations from standard UFS device spec. */

[PATCH 4.9 069/152] HID: sensor-hub add quirk for Microsoft Surface 3

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

[ Upstream commit da809197a919942ab6ee0d008c20a011872181b1 ]

One more device requiring a quirk :/

[jkosina@suse.cz: update comment based on Bastien's remark]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-sensor-hub.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -796,6 +796,9 @@ static const struct hid_device_id sensor
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
 			USB_DEVICE_ID_MS_TYPE_COVER_2),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
+			0x07bd), /* Microsoft Surface 3 */
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
 			USB_DEVICE_ID_STM_HID_SENSOR),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},

[PATCH 4.9 070/152] HID: sensor-hub: add quirk for Microchip MM7150

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

[ Upstream commit 5cc5084dd9afa2f9bf953b0217bdb1b7c2158be1 ]

One more device requiring a quirk :/

Reported-by: Christian-Nils Boda <christian-nils.boda@gadz.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-sensor-hub.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -799,6 +799,9 @@ static const struct hid_device_id sensor
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROSOFT,
 			0x07bd), /* Microsoft Surface 3 */
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_MICROCHIP,
+			0x0f01), /* MM7150 */
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
 			USB_DEVICE_ID_STM_HID_SENSOR),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},

[PATCH 4.9 071/152] HID: multitouch: enable the Surface 3 Type Cover to report multitouch data

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

[ Upstream commit 8fe89ef076fa104f514da6ef61d90f5bf93488e3 ]

There is no reasons to filter out keyboard and consumer control collections
in hid-multitouch.
With the previous hid-input fix, there is now a full support of the Type
Cover and we can remove all specific bits from hid-core and hid-microsoft.

hid-multitouch will automatically set HID_QUIRK_NO_INIT_REPORTS so we can
also remove it from the list of ushbid quirks.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-core.c          |    2 --
 drivers/hid/hid-ids.h           |    1 -
 drivers/hid/hid-microsoft.c     |    2 --
 drivers/hid/hid-multitouch.c    |    4 +++-
 drivers/hid/usbhid/hid-quirks.c |    1 -
 5 files changed, 3 insertions(+), 7 deletions(-)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -728,7 +728,6 @@ static void hid_scan_collection(struct h
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_3 ||
 	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
 	    hid->group == HID_GROUP_MULTITOUCH)
 		hid->group = HID_GROUP_GENERIC;
@@ -1984,7 +1983,6 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -724,7 +724,6 @@
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2  0x07e2
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
-#define USB_DEVICE_ID_MS_TYPE_COVER_3    0x07de
 #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
 
 #define USB_VENDOR_ID_MOJO		0x8282
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -282,8 +282,6 @@ static const struct hid_device_id ms_dev
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
 		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3),
-		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_KEYBOARD),
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -842,7 +842,9 @@ static int mt_input_mapping(struct hid_d
 	if (!td->mtclass.export_all_inputs &&
 	    field->application != HID_DG_TOUCHSCREEN &&
 	    field->application != HID_DG_PEN &&
-	    field->application != HID_DG_TOUCHPAD)
+	    field->application != HID_DG_TOUCHPAD &&
+	    field->application != HID_GD_KEYBOARD &&
+	    field->application != HID_CP_CONSUMER_CONTROL)
 		return -1;
 
 	/*
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -105,7 +105,6 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_3, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },

[PATCH 4.9 072/152] HID: multitouch: do not retrieve all reports for all devices

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

[ Upstream commit b897f6db3ae2cd9a42377f8b1865450f34ceff0e ]

We already have in place a quirk for Windows 8 devices, but it looks
like the Surface Cover are not conforming to it.
Given that we are only interested in 3 feature reports (the ones that
the Windows driver retrieves), we should be safe to unconditionally apply
the quirk to everybody.

In case there is an issue with a controller, we can always mark it as such
in the transport driver, and hid-multitouch won't try to retrieve the
feature report.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-multitouch.c |   76 ++++++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 36 deletions(-)

--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -108,6 +108,7 @@ struct mt_device {
 	int cc_value_index;	/* contact count value index in the field */
 	unsigned last_slot_field;	/* the last field of a slot */
 	unsigned mt_report_id;	/* the report ID of the multitouch device */
+	unsigned long initial_quirks;	/* initial quirks state */
 	__s16 inputmode;	/* InputMode HID feature, -1 if non-existent */
 	__s16 inputmode_index;	/* InputMode HID feature index in the report */
 	__s16 maxcontact_report_id;	/* Maximum Contact Number HID feature,
@@ -318,13 +319,10 @@ static void mt_get_feature(struct hid_de
 	u8 *buf;
 
 	/*
-	 * Only fetch the feature report if initial reports are not already
-	 * been retrieved. Currently this is only done for Windows 8 touch
-	 * devices.
+	 * Do not fetch the feature report if the device has been explicitly
+	 * marked as non-capable.
 	 */
-	if (!(hdev->quirks & HID_QUIRK_NO_INIT_REPORTS))
-		return;
-	if (td->mtclass.name != MT_CLS_WIN_8)
+	if (td->initial_quirks & HID_QUIRK_NO_INIT_REPORTS)
 		return;
 
 	buf = hid_alloc_report_buf(report, GFP_KERNEL);
@@ -1085,36 +1083,6 @@ static int mt_probe(struct hid_device *h
 		}
 	}
 
-	/* This allows the driver to correctly support devices
-	 * that emit events over several HID messages.
-	 */
-	hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
-
-	/*
-	 * This allows the driver to handle different input sensors
-	 * that emits events through different reports on the same HID
-	 * device.
-	 */
-	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
-	hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
-
-	/*
-	 * Handle special quirks for Windows 8 certified devices.
-	 */
-	if (id->group == HID_GROUP_MULTITOUCH_WIN_8)
-		/*
-		 * Some multitouch screens do not like to be polled for input
-		 * reports. Fortunately, the Win8 spec says that all touches
-		 * should be sent during each report, making the initialization
-		 * of input reports unnecessary.
-		 *
-		 * In addition some touchpads do not behave well if we read
-		 * all feature reports from them. Instead we prevent
-		 * initial report fetching and then selectively fetch each
-		 * report we are interested in.
-		 */
-		hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
-
 	td = devm_kzalloc(&hdev->dev, sizeof(struct mt_device), GFP_KERNEL);
 	if (!td) {
 		dev_err(&hdev->dev, "cannot allocate multitouch data\n");
@@ -1138,6 +1106,39 @@ static int mt_probe(struct hid_device *h
 	if (id->vendor == HID_ANY_ID && id->product == HID_ANY_ID)
 		td->serial_maybe = true;
 
+	/*
+	 * Store the initial quirk state
+	 */
+	td->initial_quirks = hdev->quirks;
+
+	/* This allows the driver to correctly support devices
+	 * that emit events over several HID messages.
+	 */
+	hdev->quirks |= HID_QUIRK_NO_INPUT_SYNC;
+
+	/*
+	 * This allows the driver to handle different input sensors
+	 * that emits events through different reports on the same HID
+	 * device.
+	 */
+	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
+	hdev->quirks |= HID_QUIRK_NO_EMPTY_INPUT;
+
+	/*
+	 * Some multitouch screens do not like to be polled for input
+	 * reports. Fortunately, the Win8 spec says that all touches
+	 * should be sent during each report, making the initialization
+	 * of input reports unnecessary. For Win7 devices, well, let's hope
+	 * they will still be happy (this is only be a problem if a touch
+	 * was already there while probing the device).
+	 *
+	 * In addition some touchpads do not behave well if we read
+	 * all feature reports from them. Instead we prevent
+	 * initial report fetching and then selectively fetch each
+	 * report we are interested in.
+	 */
+	hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
+
 	ret = hid_parse(hdev);
 	if (ret != 0)
 		return ret;
@@ -1206,8 +1207,11 @@ static int mt_resume(struct hid_device *
 
 static void mt_remove(struct hid_device *hdev)
 {
+	struct mt_device *td = hid_get_drvdata(hdev);
+
 	sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group);
 	hid_hw_stop(hdev);
+	hdev->quirks = td->initial_quirks;
 }
 
 /*

[PATCH 4.9 073/152] mmc: sdhci-msm: Enable few quirks

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ritesh Harjani <riteshh@codeaurora.org>

[ Upstream commit a0e3142869d29688de6f77be31aa7a401a4a88f1 ]

sdhc-msm controller needs this SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN
& SDHCI_QUIRK2_PRESET_VALUE_BROKEN to be set. Hence setting it.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-msm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -524,7 +524,9 @@ static const struct sdhci_ops sdhci_msm_
 static const struct sdhci_pltfm_data sdhci_msm_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_NO_CARD_NO_RESET |
-		  SDHCI_QUIRK_SINGLE_POWER_WRITE,
+		  SDHCI_QUIRK_SINGLE_POWER_WRITE |
+		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_msm_ops,
 };
 

[PATCH 4.9 074/152] scsi: ufs: ensure that host pa_tactivate is higher than device

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Subhash Jadavani <subhashj@codeaurora.org>

[ Upstream commit c6a6db439868c7ba5cc90d4c461d9697ec731fa1 ]

Some UFS devices require host PA_TACTIVATE to be higher than
device PA_TACTIVATE otherwise it may get stuck during hibern8 sequence.
This change allows this by using quirk.

Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufs_quirks.h |    9 +++++
 drivers/scsi/ufs/ufshcd.c     |   73 ++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/unipro.h     |    4 ++
 3 files changed, 86 insertions(+)

--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -128,6 +128,13 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM	(1 << 6)
 
+/*
+ * Some UFS devices require host PA_TACTIVATE to be lower than device
+ * PA_TACTIVATE, enabling this quirk ensure this.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE	(1 << 7)
+
+
 struct ufs_hba;
 void ufs_advertise_fixup_device(struct ufs_hba *hba);
 
@@ -140,6 +147,8 @@ static struct ufs_dev_fix ufs_fixups[] =
 		UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
 	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
 		UFS_DEVICE_NO_FASTAUTO),
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
 	UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
 		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
 	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4979,6 +4979,76 @@ out:
 	return ret;
 }
 
+/**
+ * ufshcd_quirk_tune_host_pa_tactivate - Ensures that host PA_TACTIVATE is
+ * less than device PA_TACTIVATE time.
+ * @hba: per-adapter instance
+ *
+ * Some UFS devices require host PA_TACTIVATE to be lower than device
+ * PA_TACTIVATE, we need to enable UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE quirk
+ * for such devices.
+ *
+ * Returns zero on success, non-zero error value on failure.
+ */
+static int ufshcd_quirk_tune_host_pa_tactivate(struct ufs_hba *hba)
+{
+	int ret = 0;
+	u32 granularity, peer_granularity;
+	u32 pa_tactivate, peer_pa_tactivate;
+	u32 pa_tactivate_us, peer_pa_tactivate_us;
+	u8 gran_to_us_table[] = {1, 4, 8, 16, 32, 100};
+
+	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_GRANULARITY),
+				  &granularity);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_GRANULARITY),
+				  &peer_granularity);
+	if (ret)
+		goto out;
+
+	if ((granularity < PA_GRANULARITY_MIN_VAL) ||
+	    (granularity > PA_GRANULARITY_MAX_VAL)) {
+		dev_err(hba->dev, "%s: invalid host PA_GRANULARITY %d",
+			__func__, granularity);
+		return -EINVAL;
+	}
+
+	if ((peer_granularity < PA_GRANULARITY_MIN_VAL) ||
+	    (peer_granularity > PA_GRANULARITY_MAX_VAL)) {
+		dev_err(hba->dev, "%s: invalid device PA_GRANULARITY %d",
+			__func__, peer_granularity);
+		return -EINVAL;
+	}
+
+	ret = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_TACTIVATE), &pa_tactivate);
+	if (ret)
+		goto out;
+
+	ret = ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_TACTIVATE),
+				  &peer_pa_tactivate);
+	if (ret)
+		goto out;
+
+	pa_tactivate_us = pa_tactivate * gran_to_us_table[granularity - 1];
+	peer_pa_tactivate_us = peer_pa_tactivate *
+			     gran_to_us_table[peer_granularity - 1];
+
+	if (pa_tactivate_us > peer_pa_tactivate_us) {
+		u32 new_peer_pa_tactivate;
+
+		new_peer_pa_tactivate = pa_tactivate_us /
+				      gran_to_us_table[peer_granularity - 1];
+		new_peer_pa_tactivate++;
+		ret = ufshcd_dme_peer_set(hba, UIC_ARG_MIB(PA_TACTIVATE),
+					  new_peer_pa_tactivate);
+	}
+
+out:
+	return ret;
+}
+
 static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
 {
 	if (ufshcd_is_unipro_pa_params_tuning_req(hba)) {
@@ -4989,6 +5059,9 @@ static void ufshcd_tune_unipro_params(st
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_PA_TACTIVATE)
 		/* set 1ms timeout for PA_TACTIVATE */
 		ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TACTIVATE), 10);
+
+	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
+		ufshcd_quirk_tune_host_pa_tactivate(hba);
 }
 
 /**
--- a/drivers/scsi/ufs/unipro.h
+++ b/drivers/scsi/ufs/unipro.h
@@ -123,6 +123,7 @@
 #define PA_MAXRXHSGEAR		0x1587
 #define PA_RXHSUNTERMCAP	0x15A5
 #define PA_RXLSTERMCAP		0x15A6
+#define PA_GRANULARITY		0x15AA
 #define PA_PACPREQTIMEOUT	0x1590
 #define PA_PACPREQEOBTIMEOUT	0x1591
 #define PA_HIBERN8TIME		0x15A7
@@ -158,6 +159,9 @@
 #define VS_DEBUGOMC		0xD09E
 #define VS_POWERSTATE		0xD083
 
+#define PA_GRANULARITY_MIN_VAL	1
+#define PA_GRANULARITY_MAX_VAL	6
+
 /* PHY Adapter Protocol Constants */
 #define PA_MAXDATALANES	4
 

[PATCH 4.9 075/152] svcauth_gss: Close connection when dropping an incoming message

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 4d712ef1db05c3aa5c3b690a50c37ebad584c53f ]

S5.3.3.1 of RFC 2203 requires that an incoming GSS-wrapped message
whose sequence number lies outside the current window is dropped.
The rationale is:

  The reason for discarding requests silently is that the server
  is unable to determine if the duplicate or out of range request
  was due to a sequencing problem in the client, network, or the
  operating system, or due to some quirk in routing, or a replay
  attack by an intruder.  Discarding the request allows the client
  to recover after timing out, if indeed the duplication was
  unintentional or well intended.

However, clients may rely on the server dropping the connection to
indicate that a retransmit is needed. Without a connection reset, a
client can wait forever without retransmitting, and the workload
just stops dead. I've reproduced this behavior by running xfstests
generic/323 on an NFSv4.0 mount with proto=rdma and sec=krb5i.

To address this issue, have the server close the connection when it
silently discards an incoming message due to a GSS sequence number
problem.

There are a few other places where the server will never reply.
Change those spots in a similar fashion.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sunrpc/auth_gss/svcauth_gss.c |    2 +-
 net/sunrpc/svc.c                  |   14 +++++++++-----
 2 files changed, 10 insertions(+), 6 deletions(-)

--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1548,7 +1548,7 @@ complete:
 	ret = SVC_COMPLETE;
 	goto out;
 drop:
-	ret = SVC_DROP;
+	ret = SVC_CLOSE;
 out:
 	if (rsci)
 		cache_put(&rsci->h, sn->rsc_cache);
--- a/net/sunrpc/svc.c
+++ b/net/sunrpc/svc.c
@@ -1155,8 +1155,7 @@ svc_process_common(struct svc_rqst *rqst
 	case SVC_DENIED:
 		goto err_bad_auth;
 	case SVC_CLOSE:
-		if (test_bit(XPT_TEMP, &rqstp->rq_xprt->xpt_flags))
-			svc_close_xprt(rqstp->rq_xprt);
+		goto close;
 	case SVC_DROP:
 		goto dropit;
 	case SVC_COMPLETE:
@@ -1246,7 +1245,7 @@ svc_process_common(struct svc_rqst *rqst
 
  sendit:
 	if (svc_authorise(rqstp))
-		goto dropit;
+		goto close;
 	return 1;		/* Caller can now send it */
 
  dropit:
@@ -1254,11 +1253,16 @@ svc_process_common(struct svc_rqst *rqst
 	dprintk("svc: svc_process dropit\n");
 	return 0;
 
+ close:
+	if (test_bit(XPT_TEMP, &rqstp->rq_xprt->xpt_flags))
+		svc_close_xprt(rqstp->rq_xprt);
+	dprintk("svc: svc_process close\n");
+	return 0;
+
 err_short_len:
 	svc_printk(rqstp, "short len %Zd, dropping request\n",
 			argv->iov_len);
-
-	goto dropit;			/* drop request */
+	goto close;
 
 err_bad_rpc:
 	serv->sv_stats->rpcbadfmt++;

[PATCH 4.9 076/152] x86/intel_idle: Add CPU model 0x4a (Atom Z34xx series)

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 5e7ec268fd48d63cfd0e3a9be6c6443f01673bd4 ]

Add CPU ID for Atom Z34xx processors. Datasheets indicate support for this,
detailed information about potential quirks or limitations are missing, though.
So we just reuse the definition from official BSP code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/idle/intel_idle.c |   49 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -724,6 +724,50 @@ static struct cpuidle_state atom_cstates
 	{
 		.enter = NULL }
 };
+static struct cpuidle_state tangier_cstates[] = {
+	{
+		.name = "C1-TNG",
+		.desc = "MWAIT 0x00",
+		.flags = MWAIT2flg(0x00),
+		.exit_latency = 1,
+		.target_residency = 4,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C4-TNG",
+		.desc = "MWAIT 0x30",
+		.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 100,
+		.target_residency = 400,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C6-TNG",
+		.desc = "MWAIT 0x52",
+		.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 140,
+		.target_residency = 560,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C7-TNG",
+		.desc = "MWAIT 0x60",
+		.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 1200,
+		.target_residency = 4000,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.name = "C9-TNG",
+		.desc = "MWAIT 0x64",
+		.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
+		.exit_latency = 10000,
+		.target_residency = 20000,
+		.enter = &intel_idle,
+		.enter_freeze = intel_idle_freeze, },
+	{
+		.enter = NULL }
+};
 static struct cpuidle_state avn_cstates[] = {
 	{
 		.name = "C1-AVN",
@@ -978,6 +1022,10 @@ static const struct idle_cpu idle_cpu_at
 	.state_table = atom_cstates,
 };
 
+static const struct idle_cpu idle_cpu_tangier = {
+	.state_table = tangier_cstates,
+};
+
 static const struct idle_cpu idle_cpu_lincroft = {
 	.state_table = atom_cstates,
 	.auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE,
@@ -1066,6 +1114,7 @@ static const struct x86_cpu_id intel_idl
 	ICPU(INTEL_FAM6_SANDYBRIDGE_X,		idle_cpu_snb),
 	ICPU(INTEL_FAM6_ATOM_CEDARVIEW,		idle_cpu_atom),
 	ICPU(INTEL_FAM6_ATOM_SILVERMONT1,	idle_cpu_byt),
+	ICPU(INTEL_FAM6_ATOM_MERRIFIELD,	idle_cpu_tangier),
 	ICPU(INTEL_FAM6_ATOM_AIRMONT,		idle_cpu_cht),
 	ICPU(INTEL_FAM6_IVYBRIDGE,		idle_cpu_ivb),
 	ICPU(INTEL_FAM6_IVYBRIDGE_X,		idle_cpu_ivt),

[PATCH 4.9 077/152] arm64: PCI: Manage controller-specific data on per-controller basis

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

[ Upstream commit 093d24a204425f71f4f106b7e62c8df4b456e1cc ]

Currently we use one shared global acpi_pci_root_ops structure to keep
controller-specific ops. We pass its pointer to acpi_pci_root_create() and
associate it with a host bridge instance for good.  Such a design implies
serious drawback. Any potential manipulation on the single system-wide
acpi_pci_root_ops leads to kernel crash. The structure content is not
really changing even across multiple host bridges creation; thus it was not
an issue so far.

In preparation for adding ECAM quirks mechanism (where controller-specific
PCI ops may be different for each host bridge) allocate new
acpi_pci_root_ops and fill in with data for each bridge. Now it is safe to
have different controller-specific info. As a consequence free
acpi_pci_root_ops when host bridge is released.

No functional changes in this patch.

Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/pci.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -159,33 +159,36 @@ static void pci_acpi_generic_release_inf
 
 	ri = container_of(ci, struct acpi_pci_generic_root_info, common);
 	pci_ecam_free(ri->cfg);
+	kfree(ci->ops);
 	kfree(ri);
 }
 
-static struct acpi_pci_root_ops acpi_pci_root_ops = {
-	.release_info = pci_acpi_generic_release_info,
-};
-
 /* Interface called from ACPI code to setup PCI host controller */
 struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 {
 	int node = acpi_get_node(root->device->handle);
 	struct acpi_pci_generic_root_info *ri;
 	struct pci_bus *bus, *child;
+	struct acpi_pci_root_ops *root_ops;
 
 	ri = kzalloc_node(sizeof(*ri), GFP_KERNEL, node);
 	if (!ri)
 		return NULL;
 
+	root_ops = kzalloc_node(sizeof(*root_ops), GFP_KERNEL, node);
+	if (!root_ops)
+		return NULL;
+
 	ri->cfg = pci_acpi_setup_ecam_mapping(root);
 	if (!ri->cfg) {
 		kfree(ri);
+		kfree(root_ops);
 		return NULL;
 	}
 
-	acpi_pci_root_ops.pci_ops = &ri->cfg->ops->pci_ops;
-	bus = acpi_pci_root_create(root, &acpi_pci_root_ops, &ri->common,
-				   ri->cfg);
+	root_ops->release_info = pci_acpi_generic_release_info;
+	root_ops->pci_ops = &ri->cfg->ops->pci_ops;
+	bus = acpi_pci_root_create(root, root_ops, &ri->common, ri->cfg);
 	if (!bus)
 		return NULL;
 

[PATCH 4.9 078/152] arm64: PCI: Add local struct device pointers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit dfd1972c2b464c10fb585c4c60b594e09d181a01 ]

Use a local "struct device *dev" for brevity.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/pci.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -121,6 +121,7 @@ int pcibios_root_bridge_prepare(struct p
 static struct pci_config_window *
 pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
 {
+	struct device *dev = &root->device->dev;
 	struct resource *bus_res = &root->secondary;
 	u16 seg = root->segment;
 	struct pci_config_window *cfg;
@@ -132,8 +133,7 @@ pci_acpi_setup_ecam_mapping(struct acpi_
 		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
 
 	if (!root->mcfg_addr) {
-		dev_err(&root->device->dev, "%04x:%pR ECAM region not found\n",
-			seg, bus_res);
+		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
 		return NULL;
 	}
 
@@ -141,11 +141,10 @@ pci_acpi_setup_ecam_mapping(struct acpi_
 	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
 	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
 	cfgres.flags = IORESOURCE_MEM;
-	cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
-			      &pci_generic_ecam_ops);
+	cfg = pci_ecam_create(dev, &cfgres, bus_res, &pci_generic_ecam_ops);
 	if (IS_ERR(cfg)) {
-		dev_err(&root->device->dev, "%04x:%pR error %ld mapping ECAM\n",
-			seg, bus_res, PTR_ERR(cfg));
+		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
+			PTR_ERR(cfg));
 		return NULL;
 	}
 

[PATCH 4.9 079/152] arm64: PCI: Search ACPI namespace to ensure ECAM space is reserved

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 08b1c19606b5fc7f895dae4d43d507b4da4a83bf ]

The static MCFG table tells us the base of ECAM space, but it does not
reserve the space -- the reservation should be done via a device in the
ACPI namespace whose _CRS includes the ECAM region.

Use acpi_resource_consumer() to check whether the ECAM space is reserved by
an ACPI namespace device.  If it is, emit a message showing which device
reserves it.  If not, emit a "[Firmware Bug]" warning.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/pci.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -124,8 +124,9 @@ pci_acpi_setup_ecam_mapping(struct acpi_
 	struct device *dev = &root->device->dev;
 	struct resource *bus_res = &root->secondary;
 	u16 seg = root->segment;
-	struct pci_config_window *cfg;
 	struct resource cfgres;
+	struct acpi_device *adev;
+	struct pci_config_window *cfg;
 	unsigned int bsz;
 
 	/* Use address from _CBA if present, otherwise lookup MCFG */
@@ -141,6 +142,15 @@ pci_acpi_setup_ecam_mapping(struct acpi_
 	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
 	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
 	cfgres.flags = IORESOURCE_MEM;
+
+	adev = acpi_resource_consumer(&cfgres);
+	if (adev)
+		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
+			 dev_name(&adev->dev));
+	else
+		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
+			 &cfgres);
+
 	cfg = pci_ecam_create(dev, &cfgres, bus_res, &pci_generic_ecam_ops);
 	if (IS_ERR(cfg)) {
 		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,

[PATCH 4.9 080/152] PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

[ Upstream commit 13983eb89d5afaa65acd4479fad151cbd4de5509 ]

pci_mcfg_lookup() is the external interface to the generic MCFG code.
Previously it merely looked up the ECAM base address for a given domain and
bus range.  We want a way to add MCFG quirks, some of which may require
special config accessors and adjustments to the ECAM address range.

Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops
structure and a struct resource for the ECAM address space.  For now, it
always returns &pci_generic_ecam_ops (the standard accessor) and the
resource described by the MCFG.

No functional changes intended.

[bhelgaas: changelog]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/pci.c  |   17 +++++------------
 drivers/acpi/pci_mcfg.c  |   28 +++++++++++++++++++++++++---
 include/linux/pci-acpi.h |    4 +++-
 3 files changed, 33 insertions(+), 16 deletions(-)

--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -124,25 +124,18 @@ pci_acpi_setup_ecam_mapping(struct acpi_
 	struct device *dev = &root->device->dev;
 	struct resource *bus_res = &root->secondary;
 	u16 seg = root->segment;
+	struct pci_ecam_ops *ecam_ops;
 	struct resource cfgres;
 	struct acpi_device *adev;
 	struct pci_config_window *cfg;
-	unsigned int bsz;
+	int ret;
 
-	/* Use address from _CBA if present, otherwise lookup MCFG */
-	if (!root->mcfg_addr)
-		root->mcfg_addr = pci_mcfg_lookup(seg, bus_res);
-
-	if (!root->mcfg_addr) {
+	ret = pci_mcfg_lookup(root, &cfgres, &ecam_ops);
+	if (ret) {
 		dev_err(dev, "%04x:%pR ECAM region not found\n", seg, bus_res);
 		return NULL;
 	}
 
-	bsz = 1 << pci_generic_ecam_ops.bus_shift;
-	cfgres.start = root->mcfg_addr + bus_res->start * bsz;
-	cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
-	cfgres.flags = IORESOURCE_MEM;
-
 	adev = acpi_resource_consumer(&cfgres);
 	if (adev)
 		dev_info(dev, "ECAM area %pR reserved by %s\n", &cfgres,
@@ -151,7 +144,7 @@ pci_acpi_setup_ecam_mapping(struct acpi_
 		dev_warn(dev, FW_BUG "ECAM area %pR not reserved in ACPI namespace\n",
 			 &cfgres);
 
-	cfg = pci_ecam_create(dev, &cfgres, bus_res, &pci_generic_ecam_ops);
+	cfg = pci_ecam_create(dev, &cfgres, bus_res, ecam_ops);
 	if (IS_ERR(cfg)) {
 		dev_err(dev, "%04x:%pR error %ld mapping ECAM\n", seg, bus_res,
 			PTR_ERR(cfg));
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/pci.h>
 #include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 
 /* Structure to hold entries from the MCFG table */
 struct mcfg_entry {
@@ -35,9 +36,18 @@ struct mcfg_entry {
 /* List to save MCFG entries */
 static LIST_HEAD(pci_mcfg_list);
 
-phys_addr_t pci_mcfg_lookup(u16 seg, struct resource *bus_res)
+int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+		    struct pci_ecam_ops **ecam_ops)
 {
+	struct pci_ecam_ops *ops = &pci_generic_ecam_ops;
+	struct resource *bus_res = &root->secondary;
+	u16 seg = root->segment;
 	struct mcfg_entry *e;
+	struct resource res;
+
+	/* Use address from _CBA if present, otherwise lookup MCFG */
+	if (root->mcfg_addr)
+		goto skip_lookup;
 
 	/*
 	 * We expect exact match, unless MCFG entry end bus covers more than
@@ -45,10 +55,22 @@ phys_addr_t pci_mcfg_lookup(u16 seg, str
 	 */
 	list_for_each_entry(e, &pci_mcfg_list, list) {
 		if (e->segment == seg && e->bus_start == bus_res->start &&
-		    e->bus_end >= bus_res->end)
-			return e->addr;
+		    e->bus_end >= bus_res->end) {
+			root->mcfg_addr = e->addr;
+		}
+
 	}
 
+	if (!root->mcfg_addr)
+		return -ENXIO;
+
+skip_lookup:
+	memset(&res, 0, sizeof(res));
+	res.start = root->mcfg_addr + (bus_res->start << 20);
+	res.end = res.start + (resource_size(bus_res) << 20) - 1;
+	res.flags = IORESOURCE_MEM;
+	*cfgres = res;
+	*ecam_ops = ops;
 	return 0;
 }
 
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -24,7 +24,9 @@ static inline acpi_status pci_acpi_remov
 }
 extern phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle);
 
-extern phys_addr_t pci_mcfg_lookup(u16 domain, struct resource *bus_res);
+struct pci_ecam_ops;
+extern int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
+			   struct pci_ecam_ops **ecam_ops);
 
 static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
 {

[PATCH 4.9 081/152] PCI/ACPI: Check for platform-specific MCFG quirks

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

[ Upstream commit 5b69b85ba1ddd36be01f5c57830b37a3c8256009 ]

The PCIe spec (r3.0, sec 7.2.2) specifies an "Enhanced Configuration Access
Mechanism" (ECAM) for memory-mapped access to configuration space.  ECAM is
required for PCIe systems unless there's a standard firmware interface for
config access.

In the absence of a firmware interface, we use pci_generic_ecam_ops, and on
ACPI systems, we discover the ECAM space via the MCFG table and/or the _CBA
method.

Unfortunately some systems provide MCFG but don't implement ECAM according
to spec, so we need a mechanism for quirks to make those systems work.

Add an MCFG quirk mechanism to override the config accessor functions
and/or the memory-mapped address space.

A quirk is selected if it matches all of the following:

  - OEM ID
  - OEM Table ID
  - OEM Revision
  - PCI segment (from _SEG)
  - PCI bus number range (from _CRS, wildcard allowed)

If the quirk specifies config accessor functions or a memory-mapped address
range, these override the defaults.

[bhelgaas: changelog, reorder quirk matching, fix oem_revision typo per
Duc, add under #ifdef CONFIG_PCI_QUIRKS]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pci_mcfg.c |   92 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 86 insertions(+), 6 deletions(-)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -33,6 +33,69 @@ struct mcfg_entry {
 	u8			bus_end;
 };
 
+#ifdef CONFIG_PCI_QUIRKS
+struct mcfg_fixup {
+	char oem_id[ACPI_OEM_ID_SIZE + 1];
+	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
+	u32 oem_revision;
+	u16 segment;
+	struct resource bus_range;
+	struct pci_ecam_ops *ops;
+	struct resource cfgres;
+};
+
+#define MCFG_BUS_RANGE(start, end)	DEFINE_RES_NAMED((start),	\
+						((end) - (start) + 1),	\
+						NULL, IORESOURCE_BUS)
+#define MCFG_BUS_ANY			MCFG_BUS_RANGE(0x0, 0xff)
+
+static struct mcfg_fixup mcfg_quirks[] = {
+/*	{ OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+};
+
+static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
+static char mcfg_oem_table_id[ACPI_OEM_TABLE_ID_SIZE];
+static u32 mcfg_oem_revision;
+
+static int pci_mcfg_quirk_matches(struct mcfg_fixup *f, u16 segment,
+				  struct resource *bus_range)
+{
+	if (!memcmp(f->oem_id, mcfg_oem_id, ACPI_OEM_ID_SIZE) &&
+	    !memcmp(f->oem_table_id, mcfg_oem_table_id,
+	            ACPI_OEM_TABLE_ID_SIZE) &&
+	    f->oem_revision == mcfg_oem_revision &&
+	    f->segment == segment &&
+	    resource_contains(&f->bus_range, bus_range))
+		return 1;
+
+	return 0;
+}
+#endif
+
+static void pci_mcfg_apply_quirks(struct acpi_pci_root *root,
+				  struct resource *cfgres,
+				  struct pci_ecam_ops **ecam_ops)
+{
+#ifdef CONFIG_PCI_QUIRKS
+	u16 segment = root->segment;
+	struct resource *bus_range = &root->secondary;
+	struct mcfg_fixup *f;
+	int i;
+
+	for (i = 0, f = mcfg_quirks; i < ARRAY_SIZE(mcfg_quirks); i++, f++) {
+		if (pci_mcfg_quirk_matches(f, segment, bus_range)) {
+			if (f->cfgres.start)
+				*cfgres = f->cfgres;
+			if (f->ops)
+				*ecam_ops =  f->ops;
+			dev_info(&root->device->dev, "MCFG quirk: ECAM at %pR for %pR with %ps\n",
+				 cfgres, bus_range, *ecam_ops);
+			return;
+		}
+	}
+#endif
+}
+
 /* List to save MCFG entries */
 static LIST_HEAD(pci_mcfg_list);
 
@@ -61,14 +124,24 @@ int pci_mcfg_lookup(struct acpi_pci_root
 
 	}
 
-	if (!root->mcfg_addr)
-		return -ENXIO;
-
 skip_lookup:
 	memset(&res, 0, sizeof(res));
-	res.start = root->mcfg_addr + (bus_res->start << 20);
-	res.end = res.start + (resource_size(bus_res) << 20) - 1;
-	res.flags = IORESOURCE_MEM;
+	if (root->mcfg_addr) {
+		res.start = root->mcfg_addr + (bus_res->start << 20);
+		res.end = res.start + (resource_size(bus_res) << 20) - 1;
+		res.flags = IORESOURCE_MEM;
+	}
+
+	/*
+	 * Allow quirks to override default ECAM ops and CFG resource
+	 * range.  This may even fabricate a CFG resource range in case
+	 * MCFG does not have it.  Invalid CFG start address means MCFG
+	 * firmware bug or we need another quirk in array.
+	 */
+	pci_mcfg_apply_quirks(root, &res, &ops);
+	if (!res.start)
+		return -ENXIO;
+
 	*cfgres = res;
 	*ecam_ops = ops;
 	return 0;
@@ -101,6 +174,13 @@ static __init int pci_mcfg_parse(struct
 		list_add(&e->list, &pci_mcfg_list);
 	}
 
+#ifdef CONFIG_PCI_QUIRKS
+	/* Save MCFG IDs and revision for quirks matching */
+	memcpy(mcfg_oem_id, header->oem_id, ACPI_OEM_ID_SIZE);
+	memcpy(mcfg_oem_table_id, header->oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
+	mcfg_oem_revision = header->oem_revision;
+#endif
+
 	pr_info("MCFG table detected, %d entries\n", n);
 	return 0;
 }

[PATCH 4.9 082/152] PCI: Add MCFG quirks for Qualcomm QDF2432 host controller

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christopher Covington <cov@codeaurora.org>

[ Upstream commit 2ca5b8ddc6f70d77a51851ba5e5cd0d39c27dd88 ]

The Qualcomm Technologies QDF2432 SoC does not support accesses smaller
than 32 bits to the PCI configuration space.  Register the appropriate
quirk.

[bhelgaas: add QCOM_ECAM32 macro, ifdef for ACPI and PCI_QUIRKS]
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pci_mcfg.c  |   11 +++++++++++
 drivers/pci/ecam.c       |   12 ++++++++++++
 include/linux/pci-ecam.h |    4 ++++
 3 files changed, 27 insertions(+)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -51,6 +51,17 @@ struct mcfg_fixup {
 
 static struct mcfg_fixup mcfg_quirks[] = {
 /*	{ OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+
+#define QCOM_ECAM32(seg) \
+	{ "QCOM  ", "QDF2432 ", 1, seg, MCFG_BUS_ANY, &pci_32b_ops }
+	QCOM_ECAM32(0),
+	QCOM_ECAM32(1),
+	QCOM_ECAM32(2),
+	QCOM_ECAM32(3),
+	QCOM_ECAM32(4),
+	QCOM_ECAM32(5),
+	QCOM_ECAM32(6),
+	QCOM_ECAM32(7),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/ecam.c
+++ b/drivers/pci/ecam.c
@@ -162,3 +162,15 @@ struct pci_ecam_ops pci_generic_ecam_ops
 		.write		= pci_generic_config_write,
 	}
 };
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+/* ECAM ops for 32-bit access only (non-compliant) */
+struct pci_ecam_ops pci_32b_ops = {
+	.bus_shift	= 20,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= pci_generic_config_read32,
+		.write		= pci_generic_config_write32,
+	}
+};
+#endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -59,6 +59,10 @@ void __iomem *pci_ecam_map_bus(struct pc
 /* default ECAM ops */
 extern struct pci_ecam_ops pci_generic_ecam_ops;
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
+#endif
+
 #ifdef CONFIG_PCI_HOST_GENERIC
 /* for DT-based PCI controllers that support ECAM */
 int pci_host_common_probe(struct platform_device *pdev,

[PATCH 4.9 083/152] PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dongdong Liu <liudongdong3@huawei.com>

[ Upstream commit 5f00f1a0178cf52928366a5e1f376a65f1f3f389 ]

The PCIe controller in Hip05/Hip06/Hip07 SoCs is not completely
ECAM-compliant.  It is non-ECAM only for the RC bus config space; for any
other bus underneath the root bus it does support ECAM access.

Add specific quirks for PCI config space accessors.  This involves:
1. New initialization call hisi_pcie_init() to obtain RC base
addresses from PNP0C02 at the root of the ACPI namespace (under \_SB).
2. New entry in common quirk array.

[bhelgaas: move to pcie-hisi.c and change Makefile/ifdefs so quirk doesn't
depend on CONFIG_PCI_HISI]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pci_mcfg.c      |   12 +++++
 drivers/pci/host/Makefile    |    2 
 drivers/pci/host/pcie-hisi.c |  101 +++++++++++++++++++++++++++++++++++++++++++
 include/linux/pci-ecam.h     |    1 
 4 files changed, 115 insertions(+), 1 deletion(-)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -62,6 +62,18 @@ static struct mcfg_fixup mcfg_quirks[] =
 	QCOM_ECAM32(5),
 	QCOM_ECAM32(6),
 	QCOM_ECAM32(7),
+
+#define HISI_QUAD_DOM(table_id, seg, ops) \
+	{ "HISI  ", table_id, 0, (seg) + 0, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, (seg) + 1, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, (seg) + 2, MCFG_BUS_ANY, ops }, \
+	{ "HISI  ", table_id, 0, (seg) + 3, MCFG_BUS_ANY, ops }
+	HISI_QUAD_DOM("HIP05   ",  0, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP06   ",  0, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ",  0, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ",  4, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ",  8, &hisi_pcie_ops),
+	HISI_QUAD_DOM("HIP07   ", 12, &hisi_pcie_ops),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -25,7 +25,7 @@ obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pci
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
-obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
 obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
--- a/drivers/pci/host/pcie-hisi.c
+++ b/drivers/pci/host/pcie-hisi.c
@@ -18,7 +18,106 @@
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/of_device.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/regmap.h>
+#include "../pci.h"
+
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+static int hisi_pcie_acpi_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+				  int size, u32 *val)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	int dev = PCI_SLOT(devfn);
+
+	if (bus->number == cfg->busr.start) {
+		/* access only one slot on each root port */
+		if (dev > 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		else
+			return pci_generic_config_read32(bus, devfn, where,
+							 size, val);
+	}
+
+	return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+static int hisi_pcie_acpi_wr_conf(struct pci_bus *bus, u32 devfn,
+				  int where, int size, u32 val)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	int dev = PCI_SLOT(devfn);
+
+	if (bus->number == cfg->busr.start) {
+		/* access only one slot on each root port */
+		if (dev > 0)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		else
+			return pci_generic_config_write32(bus, devfn, where,
+							  size, val);
+	}
+
+	return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static void __iomem *hisi_pcie_map_bus(struct pci_bus *bus, unsigned int devfn,
+				       int where)
+{
+	struct pci_config_window *cfg = bus->sysdata;
+	void __iomem *reg_base = cfg->priv;
+
+	if (bus->number == cfg->busr.start)
+		return reg_base + where;
+	else
+		return pci_ecam_map_bus(bus, devfn, where);
+}
+
+static int hisi_pcie_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+	struct resource *res;
+	void __iomem *reg_base;
+	int ret;
+
+	/*
+	 * Retrieve RC base and size from a HISI0081 device with _UID
+	 * matching our segment.
+	 */
+	res = devm_kzalloc(dev, sizeof(*res), GFP_KERNEL);
+	if (!res)
+		return -ENOMEM;
+
+	ret = acpi_get_rc_resources(dev, "HISI0081", root->segment, res);
+	if (ret) {
+		dev_err(dev, "can't get rc base address\n");
+		return -ENOMEM;
+	}
+
+	reg_base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!reg_base)
+		return -ENOMEM;
+
+	cfg->priv = reg_base;
+	return 0;
+}
+
+struct pci_ecam_ops hisi_pcie_ops = {
+	.bus_shift    = 20,
+	.init         =  hisi_pcie_init,
+	.pci_ops      = {
+		.map_bus    = hisi_pcie_map_bus,
+		.read       = hisi_pcie_acpi_rd_conf,
+		.write      = hisi_pcie_acpi_wr_conf,
+	}
+};
+
+#endif
+
+#ifdef CONFIG_PCI_HISI
 
 #include "pcie-designware.h"
 
@@ -227,3 +326,5 @@ static struct platform_driver hisi_pcie_
 	},
 };
 builtin_platform_driver(hisi_pcie_driver);
+
+#endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -61,6 +61,7 @@ extern struct pci_ecam_ops pci_generic_e
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
+extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC

[PATCH 4.9 084/152] PCI: thunder-pem: Factor out resource lookup

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 0d414268fb8d0844030f87027e904f69d96706be ]

Pull the register resource lookup out of thunder_pem_init() so we can
easily add a corresponding lookup using ACPI.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/host/pci-thunder-pem.c |   50 +++++++++++++++++++------------------
 1 file changed, 27 insertions(+), 23 deletions(-)

--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -284,35 +284,16 @@ static int thunder_pem_config_write(stru
 	return pci_generic_config_write(bus, devfn, where, size, val);
 }
 
-static int thunder_pem_init(struct pci_config_window *cfg)
+static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg,
+			    struct resource *res_pem)
 {
-	struct device *dev = cfg->parent;
-	resource_size_t bar4_start;
-	struct resource *res_pem;
 	struct thunder_pem_pci *pem_pci;
-	struct platform_device *pdev;
-
-	/* Only OF support for now */
-	if (!dev->of_node)
-		return -EINVAL;
+	resource_size_t bar4_start;
 
 	pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
 	if (!pem_pci)
 		return -ENOMEM;
 
-	pdev = to_platform_device(dev);
-
-	/*
-	 * The second register range is the PEM bridge to the PCIe
-	 * bus.  It has a different config access method than those
-	 * devices behind the bridge.
-	 */
-	res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res_pem) {
-		dev_err(dev, "missing \"reg[1]\"property\n");
-		return -EINVAL;
-	}
-
 	pem_pci->pem_reg_base = devm_ioremap(dev, res_pem->start, 0x10000);
 	if (!pem_pci->pem_reg_base)
 		return -ENOMEM;
@@ -332,9 +313,32 @@ static int thunder_pem_init(struct pci_c
 	return 0;
 }
 
+static int thunder_pem_platform_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct resource *res_pem;
+
+	if (!dev->of_node)
+		return -EINVAL;
+
+	/*
+	 * The second register range is the PEM bridge to the PCIe
+	 * bus.  It has a different config access method than those
+	 * devices behind the bridge.
+	 */
+	res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res_pem) {
+		dev_err(dev, "missing \"reg[1]\"property\n");
+		return -EINVAL;
+	}
+
+	return thunder_pem_init(dev, cfg, res_pem);
+}
+
 static struct pci_ecam_ops pci_thunder_pem_ops = {
 	.bus_shift	= 24,
-	.init		= thunder_pem_init,
+	.init		= thunder_pem_platform_init,
 	.pci_ops	= {
 		.map_bus	= pci_ecam_map_bus,
 		.read		= thunder_pem_config_read,

[PATCH 4.9 085/152] PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

[ Upstream commit 44f22bd91e88f9a1203a6e564a237e593f5f2f74 ]

ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully
compliant with ECAM standard. It uses non-standard configuration space
accessors (see thunder_pem_ecam_ops) and custom configuration space
granulation (see bus_shift = 24). In order to access configuration space
and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk
infrastructure. This involves:
1. A new thunder_pem_acpi_init() init function to locate PEM-specific
   register ranges using ACPI.
2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk
   code.
3. New quirk entries for each PEM segment. Each contains platform IDs,
   mentioned thunder_pem_ecam_ops and CFG resources.

Quirk is considered for ThunderX silicon pass2.x only which is identified
via MCFG revision 1.

ThunderX pass 2.x requires the following accessors:

  NUMA Node 0 PCI segments  0- 3: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant)
  NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so
quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pci_mcfg.c            |   19 +++++++++++++++
 drivers/pci/host/Kconfig           |    3 +-
 drivers/pci/host/Makefile          |    2 -
 drivers/pci/host/pci-thunder-pem.c |   44 +++++++++++++++++++++++++++++++++++++
 include/linux/pci-ecam.h           |    1 
 5 files changed, 67 insertions(+), 2 deletions(-)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -74,6 +74,25 @@ static struct mcfg_fixup mcfg_quirks[] =
 	HISI_QUAD_DOM("HIP07   ",  4, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP07   ",  8, &hisi_pcie_ops),
 	HISI_QUAD_DOM("HIP07   ", 12, &hisi_pcie_ops),
+
+#define THUNDER_PEM_RES(addr, node) \
+	DEFINE_RES_MEM((addr) + ((u64) (node) << 44), 0x39 * SZ_16M)
+#define THUNDER_PEM_QUIRK(rev, node) \
+	{ "CAVIUM", "THUNDERX", rev, 4 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88001f000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 5 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x884057000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 6 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x88808f000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 7 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89001f000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 8 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x894057000000UL, node) },  \
+	{ "CAVIUM", "THUNDERX", rev, 9 + (10 * (node)), MCFG_BUS_ANY,	    \
+	  &thunder_pem_ecam_ops, THUNDER_PEM_RES(0x89808f000000UL, node) }
+	/* SoC pass2.x */
+	THUNDER_PEM_QUIRK(1, 0),
+	THUNDER_PEM_QUIRK(1, 1),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -240,7 +240,8 @@ config PCIE_QCOM
 
 config PCI_HOST_THUNDER_PEM
 	bool "Cavium Thunder PCIe controller to off-chip devices"
-	depends on OF && ARM64
+	depends on ARM64
+	depends on OF || (ACPI && PCI_QUIRKS)
 	select PCI_HOST_COMMON
 	help
 	  Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-al
 obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
-obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
+obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
 obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -18,8 +18,12 @@
 #include <linux/init.h>
 #include <linux/of_address.h>
 #include <linux/of_pci.h>
+#include <linux/pci-acpi.h>
 #include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
+#include "../pci.h"
+
+#if defined(CONFIG_PCI_HOST_THUNDER_PEM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
 
 #define PEM_CFG_WR 0x28
 #define PEM_CFG_RD 0x30
@@ -313,6 +317,43 @@ static int thunder_pem_init(struct devic
 	return 0;
 }
 
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+
+static int thunder_pem_acpi_init(struct pci_config_window *cfg)
+{
+	struct device *dev = cfg->parent;
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct acpi_pci_root *root = acpi_driver_data(adev);
+	struct resource *res_pem;
+	int ret;
+
+	res_pem = devm_kzalloc(&adev->dev, sizeof(*res_pem), GFP_KERNEL);
+	if (!res_pem)
+		return -ENOMEM;
+
+	ret = acpi_get_rc_resources(dev, "THRX0002", root->segment, res_pem);
+	if (ret) {
+		dev_err(dev, "can't get rc base address\n");
+		return ret;
+	}
+
+	return thunder_pem_init(dev, cfg, res_pem);
+}
+
+struct pci_ecam_ops thunder_pem_ecam_ops = {
+	.bus_shift	= 24,
+	.init		= thunder_pem_acpi_init,
+	.pci_ops	= {
+		.map_bus	= pci_ecam_map_bus,
+		.read		= thunder_pem_config_read,
+		.write		= thunder_pem_config_write,
+	}
+};
+
+#endif
+
+#ifdef CONFIG_PCI_HOST_THUNDER_PEM
+
 static int thunder_pem_platform_init(struct pci_config_window *cfg)
 {
 	struct device *dev = cfg->parent;
@@ -364,3 +405,6 @@ static struct platform_driver thunder_pe
 	.probe = thunder_pem_probe,
 };
 builtin_platform_driver(thunder_pem_driver);
+
+#endif
+#endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -62,6 +62,7 @@ extern struct pci_ecam_ops pci_generic_e
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
+extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 2.x */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC

[PATCH 4.9 086/152] PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomasz Nowicki <tn@semihalf.com>

[ Upstream commit 648d93fc77da4f655cf13108417f33c91d745e2c ]

ThunderX pass1.x requires to emulate the EA headers for on-chip devices
hence it has to use custom pci_thunder_ecam_ops for accessing PCI config
space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it
can be applied while probing ACPI based PCI host controller.

ThunderX pass1.x is using the same way for accessing off-chip devices
(so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries
too.

Quirk is considered for ThunderX silicon pass1.x only which is identified
via MCFG revision 2.

ThunderX pass 1.x requires the following accessors:

  NUMA node 0 PCI segments  0- 3: pci_thunder_ecam_ops (MCFG quirk)
  NUMA node 0 PCI segments  4- 9: thunder_pem_ecam_ops (MCFG quirk)
  NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk)
  NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk)

[bhelgaas: change Makefile/ifdefs so quirk doesn't depend on
CONFIG_PCI_HOST_THUNDER_ECAM]
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pci_mcfg.c             |   15 +++++++++++++++
 drivers/pci/host/Kconfig            |    3 ++-
 drivers/pci/host/Makefile           |    2 +-
 drivers/pci/host/pci-thunder-ecam.c |    9 ++++++++-
 include/linux/pci-ecam.h            |    3 ++-
 5 files changed, 28 insertions(+), 4 deletions(-)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -93,6 +93,21 @@ static struct mcfg_fixup mcfg_quirks[] =
 	/* SoC pass2.x */
 	THUNDER_PEM_QUIRK(1, 0),
 	THUNDER_PEM_QUIRK(1, 1),
+
+#define THUNDER_ECAM_QUIRK(rev, seg)					\
+	{ "CAVIUM", "THUNDERX", rev, seg, MCFG_BUS_ANY,			\
+	&pci_thunder_ecam_ops }
+	/* SoC pass1.x */
+	THUNDER_PEM_QUIRK(2, 0),	/* off-chip devices */
+	THUNDER_PEM_QUIRK(2, 1),	/* off-chip devices */
+	THUNDER_ECAM_QUIRK(2,  0),
+	THUNDER_ECAM_QUIRK(2,  1),
+	THUNDER_ECAM_QUIRK(2,  2),
+	THUNDER_ECAM_QUIRK(2,  3),
+	THUNDER_ECAM_QUIRK(2, 10),
+	THUNDER_ECAM_QUIRK(2, 11),
+	THUNDER_ECAM_QUIRK(2, 12),
+	THUNDER_ECAM_QUIRK(2, 13),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -248,7 +248,8 @@ config PCI_HOST_THUNDER_PEM
 
 config PCI_HOST_THUNDER_ECAM
 	bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
-	depends on OF && ARM64
+	depends on ARM64
+	depends on OF || (ACPI && PCI_QUIRKS)
 	select PCI_HOST_COMMON
 	help
 	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
-obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
 obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
--- a/drivers/pci/host/pci-thunder-ecam.c
+++ b/drivers/pci/host/pci-thunder-ecam.c
@@ -14,6 +14,8 @@
 #include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 
+#if defined(CONFIG_PCI_HOST_THUNDER_ECAM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
+
 static void set_val(u32 v, int where, int size, u32 *val)
 {
 	int shift = (where & 3) * 8;
@@ -346,7 +348,7 @@ static int thunder_ecam_config_write(str
 	return pci_generic_config_write(bus, devfn, where, size, val);
 }
 
-static struct pci_ecam_ops pci_thunder_ecam_ops = {
+struct pci_ecam_ops pci_thunder_ecam_ops = {
 	.bus_shift	= 20,
 	.pci_ops	= {
 		.map_bus        = pci_ecam_map_bus,
@@ -355,6 +357,8 @@ static struct pci_ecam_ops pci_thunder_e
 	}
 };
 
+#ifdef CONFIG_PCI_HOST_THUNDER_ECAM
+
 static const struct of_device_id thunder_ecam_of_match[] = {
 	{ .compatible = "cavium,pci-host-thunder-ecam" },
 	{ },
@@ -373,3 +377,6 @@ static struct platform_driver thunder_ec
 	.probe = thunder_ecam_probe,
 };
 builtin_platform_driver(thunder_ecam_driver);
+
+#endif
+#endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -62,7 +62,8 @@ extern struct pci_ecam_ops pci_generic_e
 #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
 extern struct pci_ecam_ops pci_32b_ops;		/* 32-bit accesses only */
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
-extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 2.x */
+extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
+extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC

[PATCH 4.9 087/152] PCI: Add MCFG quirks for X-Gene host controller

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Duc Dang <dhdang@apm.com>

[ Upstream commit c5d4603961009c39de94725213d8b5420f110f9e ]

PCIe controllers in X-Gene SoCs are not ECAM compliant: software needs to
configure additional controller's register to address device at
bus:dev:function.

Add a quirk to discover controller MMIO register space and configure
controller registers to select and address the target secondary device.

The quirk will only be applied for X-Gene PCIe MCFG table with
OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).

Tested-by: Jon Masters <jcm@redhat.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/pci_mcfg.c      |   25 ++++++++
 drivers/pci/host/Kconfig     |    4 -
 drivers/pci/host/Makefile    |    2 
 drivers/pci/host/pci-xgene.c |  126 ++++++++++++++++++++++++++++++++++++++++---
 include/linux/pci-ecam.h     |    2 
 5 files changed, 149 insertions(+), 10 deletions(-)

--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -108,6 +108,31 @@ static struct mcfg_fixup mcfg_quirks[] =
 	THUNDER_ECAM_QUIRK(2, 11),
 	THUNDER_ECAM_QUIRK(2, 12),
 	THUNDER_ECAM_QUIRK(2, 13),
+
+#define XGENE_V1_ECAM_MCFG(rev, seg) \
+	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
+		&xgene_v1_pcie_ecam_ops }
+#define XGENE_V2_ECAM_MCFG(rev, seg) \
+	{"APM   ", "XGENE   ", rev, seg, MCFG_BUS_ANY, \
+		&xgene_v2_pcie_ecam_ops }
+	/* X-Gene SoC with v1 PCIe controller */
+	XGENE_V1_ECAM_MCFG(1, 0),
+	XGENE_V1_ECAM_MCFG(1, 1),
+	XGENE_V1_ECAM_MCFG(1, 2),
+	XGENE_V1_ECAM_MCFG(1, 3),
+	XGENE_V1_ECAM_MCFG(1, 4),
+	XGENE_V1_ECAM_MCFG(2, 0),
+	XGENE_V1_ECAM_MCFG(2, 1),
+	XGENE_V1_ECAM_MCFG(2, 2),
+	XGENE_V1_ECAM_MCFG(2, 3),
+	XGENE_V1_ECAM_MCFG(2, 4),
+	/* X-Gene SoC with v2.1 PCIe controller */
+	XGENE_V2_ECAM_MCFG(3, 0),
+	XGENE_V2_ECAM_MCFG(3, 1),
+	/* X-Gene SoC with v2.2 PCIe controller */
+	XGENE_V2_ECAM_MCFG(4, 0),
+	XGENE_V2_ECAM_MCFG(4, 1),
+	XGENE_V2_ECAM_MCFG(4, 2),
 };
 
 static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -133,8 +133,8 @@ config PCIE_XILINX
 
 config PCI_XGENE
 	bool "X-Gene PCIe controller"
-	depends on ARCH_XGENE
-	depends on OF
+	depends on ARM64
+	depends on OF || (ACPI && PCI_QUIRKS)
 	select PCIEPORTBUS
 	help
 	  Say Y here if you want internal PCI support on APM X-Gene SoC.
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
 obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
-obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
+obj-$(CONFIG_ARM64) += pci-xgene.o
 obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -27,6 +27,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
 #include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/pci-ecam.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
@@ -64,7 +66,9 @@
 /* PCIe IP version */
 #define XGENE_PCIE_IP_VER_UNKN		0
 #define XGENE_PCIE_IP_VER_1		1
+#define XGENE_PCIE_IP_VER_2		2
 
+#if defined(CONFIG_PCI_XGENE) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS))
 struct xgene_pcie_port {
 	struct device_node	*node;
 	struct device		*dev;
@@ -91,13 +95,24 @@ static inline u32 pcie_bar_low_val(u32 a
 	return (addr & PCI_BASE_ADDRESS_MEM_MASK) | flags;
 }
 
+static inline struct xgene_pcie_port *pcie_bus_to_port(struct pci_bus *bus)
+{
+	struct pci_config_window *cfg;
+
+	if (acpi_disabled)
+		return (struct xgene_pcie_port *)(bus->sysdata);
+
+	cfg = bus->sysdata;
+	return (struct xgene_pcie_port *)(cfg->priv);
+}
+
 /*
  * When the address bit [17:16] is 2'b01, the Configuration access will be
  * treated as Type 1 and it will be forwarded to external PCIe device.
  */
 static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
 {
-	struct xgene_pcie_port *port = bus->sysdata;
+	struct xgene_pcie_port *port = pcie_bus_to_port(bus);
 
 	if (bus->number >= (bus->primary + 1))
 		return port->cfg_base + AXI_EP_CFG_ACCESS;
@@ -111,7 +126,7 @@ static void __iomem *xgene_pcie_get_cfg_
  */
 static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
 {
-	struct xgene_pcie_port *port = bus->sysdata;
+	struct xgene_pcie_port *port = pcie_bus_to_port(bus);
 	unsigned int b, d, f;
 	u32 rtdid_val = 0;
 
@@ -158,7 +173,7 @@ static void __iomem *xgene_pcie_map_bus(
 static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
 				    int where, int size, u32 *val)
 {
-	struct xgene_pcie_port *port = bus->sysdata;
+	struct xgene_pcie_port *port = pcie_bus_to_port(bus);
 
 	if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
 	    PCIBIOS_SUCCESSFUL)
@@ -182,13 +197,103 @@ static int xgene_pcie_config_read32(stru
 
 	return PCIBIOS_SUCCESSFUL;
 }
+#endif
 
-static struct pci_ops xgene_pcie_ops = {
-	.map_bus = xgene_pcie_map_bus,
-	.read = xgene_pcie_config_read32,
-	.write = pci_generic_config_write32,
+#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
+static int xgene_get_csr_resource(struct acpi_device *adev,
+				  struct resource *res)
+{
+	struct device *dev = &adev->dev;
+	struct resource_entry *entry;
+	struct list_head list;
+	unsigned long flags;
+	int ret;
+
+	INIT_LIST_HEAD(&list);
+	flags = IORESOURCE_MEM;
+	ret = acpi_dev_get_resources(adev, &list,
+				     acpi_dev_filter_resource_type_cb,
+				     (void *) flags);
+	if (ret < 0) {
+		dev_err(dev, "failed to parse _CRS method, error code %d\n",
+			ret);
+		return ret;
+	}
+
+	if (ret == 0) {
+		dev_err(dev, "no IO and memory resources present in _CRS\n");
+		return -EINVAL;
+	}
+
+	entry = list_first_entry(&list, struct resource_entry, node);
+	*res = *entry->res;
+	acpi_dev_free_resource_list(&list);
+	return 0;
+}
+
+static int xgene_pcie_ecam_init(struct pci_config_window *cfg, u32 ipversion)
+{
+	struct device *dev = cfg->parent;
+	struct acpi_device *adev = to_acpi_device(dev);
+	struct xgene_pcie_port *port;
+	struct resource csr;
+	int ret;
+
+	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
+	if (!port)
+		return -ENOMEM;
+
+	ret = xgene_get_csr_resource(adev, &csr);
+	if (ret) {
+		dev_err(dev, "can't get CSR resource\n");
+		kfree(port);
+		return ret;
+	}
+	port->csr_base = devm_ioremap_resource(dev, &csr);
+	if (IS_ERR(port->csr_base)) {
+		kfree(port);
+		return -ENOMEM;
+	}
+
+	port->cfg_base = cfg->win;
+	port->version = ipversion;
+
+	cfg->priv = port;
+	return 0;
+}
+
+static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
+{
+	return xgene_pcie_ecam_init(cfg, XGENE_PCIE_IP_VER_1);
+}
+
+struct pci_ecam_ops xgene_v1_pcie_ecam_ops = {
+	.bus_shift      = 16,
+	.init           = xgene_v1_pcie_ecam_init,
+	.pci_ops        = {
+		.map_bus        = xgene_pcie_map_bus,
+		.read           = xgene_pcie_config_read32,
+		.write          = pci_generic_config_write,
+	}
+};
+
+static int xgene_v2_pcie_ecam_init(struct pci_config_window *cfg)
+{
+	return xgene_pcie_ecam_init(cfg, XGENE_PCIE_IP_VER_2);
+}
+
+struct pci_ecam_ops xgene_v2_pcie_ecam_ops = {
+	.bus_shift      = 16,
+	.init           = xgene_v2_pcie_ecam_init,
+	.pci_ops        = {
+		.map_bus        = xgene_pcie_map_bus,
+		.read           = xgene_pcie_config_read32,
+		.write          = pci_generic_config_write,
+	}
 };
+#endif
 
+#if defined(CONFIG_PCI_XGENE)
 static u64 xgene_pcie_set_ib_mask(struct xgene_pcie_port *port, u32 addr,
 				  u32 flags, u64 size)
 {
@@ -521,6 +626,12 @@ static int xgene_pcie_setup(struct xgene
 	return 0;
 }
 
+static struct pci_ops xgene_pcie_ops = {
+	.map_bus = xgene_pcie_map_bus,
+	.read = xgene_pcie_config_read32,
+	.write = pci_generic_config_write32,
+};
+
 static int xgene_pcie_probe_bridge(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -591,3 +702,4 @@ static struct platform_driver xgene_pcie
 	.probe = xgene_pcie_probe_bridge,
 };
 builtin_platform_driver(xgene_pcie_driver);
+#endif
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -64,6 +64,8 @@ extern struct pci_ecam_ops pci_32b_ops;
 extern struct pci_ecam_ops hisi_pcie_ops;	/* HiSilicon */
 extern struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */
 extern struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */
+extern struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 */
+extern struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
 #endif
 
 #ifdef CONFIG_PCI_HOST_GENERIC

[PATCH 4.9 088/152] PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategy

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit ca5ab37b19dfd1d77787d0474b767ec1185670f4 ]

Add Makefile comments to explain the Kconfig and build strategy for ARM64
drivers that work around not-quite-ECAM issues.  No functional change
intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/host/Makefile |   19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spe
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
 obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
-obj-$(CONFIG_ARM64) += pci-xgene.o
 obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
@@ -25,11 +24,23 @@ obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pci
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
-obj-$(CONFIG_ARM64) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
-obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
-obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
 obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
 obj-$(CONFIG_VMD) += vmd.o
+
+# The following drivers are for devices that use the generic ACPI
+# pci_root.c driver but don't support standard ECAM config access.
+# They contain MCFG quirks to replace the generic ECAM accessors with
+# device-specific ones that are shared with the DT driver.
+
+# The ACPI driver is generic and should not require driver-specific
+# config options to be enabled, so we always build these drivers on
+# ARM64 and use internal ifdefs to only build the pieces we need
+# depending on whether ACPI, the DT driver, or both are enabled.
+
+obj-$(CONFIG_ARM64) += pcie-hisi.o
+obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
+obj-$(CONFIG_ARM64) += pci-thunder-pem.o
+obj-$(CONFIG_ARM64) += pci-xgene.o

[PATCH 4.9 089/152] scsi: ufs: add quirk to increase host PA_SaveConfigTime

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Subhash Jadavani <subhashj@codeaurora.org>

[ Upstream commit 56d4a1866d748732fd8d690b2c2156bbc9c9eb02 ]

The maximum value PA_SaveConfigTime is 250 (10us) but this is not enough
for some vendors. Gear switch from PWM to HS may fail even with this
max.  PA_SaveConfigTime. Gear switch can be issued by host controller as
an error recovery and any software delay will not help on this case so
we need to increase PA_SaveConfigTime to >32us as per vendor
recommendation.  This change adds a quirk to increase the
PA_SaveConfigTime parameter.

Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufs-qcom.c   |   30 ++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufs-qcom.h   |    1 +
 drivers/scsi/ufs/ufs_quirks.h |   30 +++++++++---------------------
 drivers/scsi/ufs/ufshcd.c     |   26 ++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd.h     |    9 +++++++++
 5 files changed, 75 insertions(+), 21 deletions(-)

--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -23,6 +23,7 @@
 #include "unipro.h"
 #include "ufs-qcom.h"
 #include "ufshci.h"
+#include "ufs_quirks.h"
 #define UFS_QCOM_DEFAULT_DBG_PRINT_EN	\
 	(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
 
@@ -1031,6 +1032,34 @@ out:
 	return ret;
 }
 
+static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
+{
+	int err;
+	u32 pa_vs_config_reg1;
+
+	err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+			     &pa_vs_config_reg1);
+	if (err)
+		goto out;
+
+	/* Allow extension of MSB bits of PA_SaveConfigTime attribute */
+	err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+			    (pa_vs_config_reg1 | (1 << 12)));
+
+out:
+	return err;
+}
+
+static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
+{
+	int err = 0;
+
+	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
+		err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
+
+	return err;
+}
+
 static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
 {
 	struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@@ -1616,6 +1645,7 @@ static struct ufs_hba_variant_ops ufs_hb
 	.hce_enable_notify      = ufs_qcom_hce_enable_notify,
 	.link_startup_notify    = ufs_qcom_link_startup_notify,
 	.pwr_change_notify	= ufs_qcom_pwr_change_notify,
+	.apply_dev_quirks	= ufs_qcom_apply_dev_quirks,
 	.suspend		= ufs_qcom_suspend,
 	.resume			= ufs_qcom_resume,
 	.dbg_register_dump	= ufs_qcom_dump_dbg_regs,
--- a/drivers/scsi/ufs/ufs-qcom.h
+++ b/drivers/scsi/ufs/ufs-qcom.h
@@ -142,6 +142,7 @@ enum ufs_qcom_phy_init_type {
 	 UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
 
 /* QUniPro Vendor specific attributes */
+#define PA_VS_CONFIG_REG1	0x9000
 #define DME_VS_CORE_CLK_CTRL	0xD002
 /* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
 #define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT		BIT(8)
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -134,29 +134,17 @@ struct ufs_dev_fix {
  */
 #define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE	(1 << 7)
 
+/*
+ * The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
+ * some vendors.
+ * Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
+ * Gear switch can be issued by host controller as an error recovery and any
+ * software delay will not help on this case so we need to increase
+ * PA_SaveConfigTime to >32us as per vendor recommendation.
+ */
+#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME	(1 << 8)
 
 struct ufs_hba;
 void ufs_advertise_fixup_device(struct ufs_hba *hba);
 
-static struct ufs_dev_fix ufs_fixups[] = {
-	/* UFS cards deviations table */
-	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
-		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
-	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
-	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
-		UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
-	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
-		UFS_DEVICE_NO_FASTAUTO),
-	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
-		UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
-	UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
-		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
-	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
-		UFS_DEVICE_QUIRK_PA_TACTIVATE),
-	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
-		UFS_DEVICE_QUIRK_PA_TACTIVATE),
-	UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
-
-	END_FIX
-};
 #endif /* UFS_QUIRKS_H_ */
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -188,6 +188,30 @@ ufs_get_pm_lvl_to_link_pwr_state(enum uf
 	return ufs_pm_lvl_states[lvl].link_state;
 }
 
+static struct ufs_dev_fix ufs_fixups[] = {
+	/* UFS cards deviations table */
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+		UFS_DEVICE_NO_FASTAUTO),
+	UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
+	UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
+	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
+		UFS_DEVICE_QUIRK_PA_TACTIVATE),
+	UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
+		UFS_DEVICE_QUIRK_PA_TACTIVATE),
+	UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
+	UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
+		UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),
+
+	END_FIX
+};
+
 static void ufshcd_tmc_handler(struct ufs_hba *hba);
 static void ufshcd_async_scan(void *data, async_cookie_t cookie);
 static int ufshcd_reset_and_restore(struct ufs_hba *hba);
@@ -5062,6 +5086,8 @@ static void ufshcd_tune_unipro_params(st
 
 	if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
 		ufshcd_quirk_tune_host_pa_tactivate(hba);
+
+	ufshcd_vops_apply_dev_quirks(hba);
 }
 
 /**
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -261,6 +261,7 @@ struct ufs_pwr_mode_info {
  * @pwr_change_notify: called before and after a power mode change
  *			is carried out to allow vendor spesific capabilities
  *			to be set.
+ * @apply_dev_quirks: called to apply device specific quirks
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
  * @dbg_register_dump: used to dump controller debug information
@@ -283,6 +284,7 @@ struct ufs_hba_variant_ops {
 					enum ufs_notify_change_status status,
 					struct ufs_pa_layer_attr *,
 					struct ufs_pa_layer_attr *);
+	int	(*apply_dev_quirks)(struct ufs_hba *);
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
@@ -805,6 +807,13 @@ static inline int ufshcd_vops_pwr_change
 	return -ENOTSUPP;
 }
 
+static inline int ufshcd_vops_apply_dev_quirks(struct ufs_hba *hba)
+{
+	if (hba->vops && hba->vops->apply_dev_quirks)
+		return hba->vops->apply_dev_quirks(hba);
+	return 0;
+}
+
 static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
 {
 	if (hba->vops && hba->vops->suspend)

[PATCH 4.9 090/152] ALSA: usb-audio: add implicit fb quirk for Axe-Fx II

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alberto Aguirre <albaguirre@gmail.com>

[ Upstream commit 17f08b0d9aafccdb10038ab6dbd9ddb6433c13e2 ]

The Axe-Fx II implicit feedback end point and the data sync endpoint
are in different interface descriptors. Add quirk to ensure a sync
endpoint is properly configured.

Signed-off-by: Alberto Aguirre <albaguirre@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/pcm.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -348,6 +348,16 @@ static int set_sync_ep_implicit_fb_quirk
 
 		alts = &iface->altsetting[1];
 		goto add_sync_ep;
+	case USB_ID(0x2466, 0x8003):
+		ep = 0x86;
+		iface = usb_ifnum_to_if(dev, 2);
+
+		if (!iface || iface->num_altsetting == 0)
+			return -EINVAL;
+
+		alts = &iface->altsetting[1];
+		goto add_sync_ep;
+
 	}
 	if (attr == USB_ENDPOINT_SYNC_ASYNC &&
 	    altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&

[PATCH 4.9 091/152] PCI: Expand "VPD access disabled" quirk message

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

[ Upstream commit 044bc425bb72ffdecfb2a66d50cb1d024ecb96d0 ]

It's not very enlightening to see

  pci 0000:07:00.0: [Firmware Bug]: VPD access disabled

in the dmesg log because there's no clue about what the firmware bug is.
Expand the message to explain why we're disabling VPD.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2156,7 +2156,7 @@ static void quirk_blacklist_vpd(struct p
 {
 	if (dev->vpd) {
 		dev->vpd->len = 0;
-		dev_warn(&dev->dev, FW_BUG "VPD access disabled\n");
+		dev_warn(&dev->dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
 	}
 }
 

[PATCH 4.9 092/152] ALSA: usb-audio: Add native DSD support for TEAC 501/503 DAC

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nobutaka Okabe <nob77413@gmail.com>

[ Upstream commit 7f38ca047b0cb54df7f6d9e4110e292e45dba6ad ]

This patch adds native DSD support for the following devices.

- TEAC NT-503
- TEAC UD-503
- TEAC UD-501

(1) Add quirks for native DSD support for TEAC devices.
(2) A specific vendor command is needed to switch between PCM/DOP and
    DSD mode, same as Denon/Marantz devices.

Signed-off-by: Nobutaka Okabe <nob77413@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks.c |   38 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1166,6 +1166,18 @@ static bool is_marantz_denon_dac(unsigne
 	return false;
 }
 
+/* TEAC UD-501/UD-503/NT-503 USB DACs need a vendor cmd to switch
+ * between PCM/DOP and native DSD mode
+ */
+static bool is_teac_50X_dac(unsigned int id)
+{
+	switch (id) {
+	case USB_ID(0x0644, 0x8043): /* TEAC UD-501/UD-503/NT-503 */
+		return true;
+	}
+	return false;
+}
+
 int snd_usb_select_mode_quirk(struct snd_usb_substream *subs,
 			      struct audioformat *fmt)
 {
@@ -1193,6 +1205,26 @@ int snd_usb_select_mode_quirk(struct snd
 			break;
 		}
 		mdelay(20);
+	} else if (is_teac_50X_dac(subs->stream->chip->usb_id)) {
+		/* Vendor mode switch cmd is required. */
+		switch (fmt->altsetting) {
+		case 3: /* DSD mode (DSD_U32) requested */
+			err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
+					      USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+					      1, 1, NULL, 0);
+			if (err < 0)
+				return err;
+			break;
+
+		case 2: /* PCM or DOP mode (S32) requested */
+		case 1: /* PCM mode (S16) requested */
+			err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 0,
+					      USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+					      0, 1, NULL, 0);
+			if (err < 0)
+				return err;
+			break;
+		}
 	}
 	return 0;
 }
@@ -1338,5 +1370,11 @@ u64 snd_usb_interface_dsd_format_quirks(
 			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
 	}
 
+	/* TEAC devices with USB DAC functionality */
+	if (is_teac_50X_dac(chip->usb_id)) {
+		if (fp->altsetting == 3)
+			return SNDRV_PCM_FMTBIT_DSD_U32_BE;
+	}
+
 	return 0;
 }

[PATCH 4.9 094/152] HID: asus: Add i2c touchpad support

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brendan McGrath <redmcg@redmandi.dyndns.org>

[ Upstream commit 9ce12d8be12c94334634dd57050444910415e45f ]

Update the hid-asus module to add multitouch support for the Asus i2c touchpad.

This patch aims to resolve the issue raised here:
https://bugzilla.kernel.org/show_bug.cgi?id=120181

The issue is in relation to an Asus touchpad device which currently does not
have multitouch support.

The device currently falls through to the hid-generic driver which
treats the device as a mouse.

This patch aims to add the multitouch support.

[jkosina@suse.cz: move most of the 'patch comment' into actual changelog]
[jkosina@suse.cz: drop hunk that changes ->name of the driver]
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Signed-off-by: Victor Vlasenko <victor.vlasenko@sysgears.com>
Signed-off-by: Frederik Wenigwieser <frederik.wenigwieser@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/Kconfig    |    2 
 drivers/hid/hid-asus.c |  299 ++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/hid/hid-core.c |    1 
 drivers/hid/hid-ids.h  |    1 
 4 files changed, 296 insertions(+), 7 deletions(-)

--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -138,7 +138,7 @@ config HID_ASUS
 	tristate "Asus"
 	depends on I2C_HID
 	---help---
-	Support for Asus notebook built-in keyboard via i2c.
+	Support for Asus notebook built-in keyboard and touchpad via i2c.
 
 	Supported devices:
 	- EeeBook X205TA
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -11,6 +11,12 @@
  *  This module based on hid-ortek by
  *  Copyright (c) 2010 Johnathon Harris <jmharris@gmail.com>
  *  Copyright (c) 2011 Jiri Kosina
+ *
+ *  This module has been updated to add support for Asus i2c touchpad.
+ *
+ *  Copyright (c) 2016 Brendan McGrath <redmcg@redmandi.dyndns.org>
+ *  Copyright (c) 2016 Victor Vlasenko <victor.vlasenko@sysgears.com>
+ *  Copyright (c) 2016 Frederik Wenigwieser <frederik.wenigwieser@gmail.com>
  */
 
 /*
@@ -20,16 +26,287 @@
  * any later version.
  */
 
-#include <linux/device.h>
 #include <linux/hid.h>
 #include <linux/module.h>
+#include <linux/input/mt.h>
 
 #include "hid-ids.h"
 
+MODULE_AUTHOR("Yusuke Fujimaki <usk.fujimaki@gmail.com>");
+MODULE_AUTHOR("Brendan McGrath <redmcg@redmandi.dyndns.org>");
+MODULE_AUTHOR("Victor Vlasenko <victor.vlasenko@sysgears.com>");
+MODULE_AUTHOR("Frederik Wenigwieser <frederik.wenigwieser@gmail.com>");
+MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
+
+#define FEATURE_REPORT_ID 0x0d
+#define INPUT_REPORT_ID 0x5d
+
+#define INPUT_REPORT_SIZE 28
+
+#define MAX_CONTACTS 5
+
+#define MAX_X 2794
+#define MAX_Y 1758
+#define MAX_TOUCH_MAJOR 8
+#define MAX_PRESSURE 128
+
+#define CONTACT_DATA_SIZE 5
+
+#define BTN_LEFT_MASK 0x01
+#define CONTACT_TOOL_TYPE_MASK 0x80
+#define CONTACT_X_MSB_MASK 0xf0
+#define CONTACT_Y_MSB_MASK 0x0f
+#define CONTACT_TOUCH_MAJOR_MASK 0x07
+#define CONTACT_PRESSURE_MASK 0x7f
+
+#define QUIRK_FIX_NOTEBOOK_REPORT	BIT(0)
+#define QUIRK_NO_INIT_REPORTS		BIT(1)
+#define QUIRK_SKIP_INPUT_MAPPING	BIT(2)
+#define QUIRK_IS_MULTITOUCH		BIT(3)
+
+#define NOTEBOOK_QUIRKS			QUIRK_FIX_NOTEBOOK_REPORT
+#define TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
+						 QUIRK_SKIP_INPUT_MAPPING | \
+						 QUIRK_IS_MULTITOUCH)
+
+#define TRKID_SGN       ((TRKID_MAX + 1) >> 1)
+
+struct asus_drvdata {
+	unsigned long quirks;
+	struct input_dev *input;
+};
+
+static void asus_report_contact_down(struct input_dev *input,
+		int toolType, u8 *data)
+{
+	int touch_major, pressure;
+	int x = (data[0] & CONTACT_X_MSB_MASK) << 4 | data[1];
+	int y = MAX_Y - ((data[0] & CONTACT_Y_MSB_MASK) << 8 | data[2]);
+
+	if (toolType == MT_TOOL_PALM) {
+		touch_major = MAX_TOUCH_MAJOR;
+		pressure = MAX_PRESSURE;
+	} else {
+		touch_major = (data[3] >> 4) & CONTACT_TOUCH_MAJOR_MASK;
+		pressure = data[4] & CONTACT_PRESSURE_MASK;
+	}
+
+	input_report_abs(input, ABS_MT_POSITION_X, x);
+	input_report_abs(input, ABS_MT_POSITION_Y, y);
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR, touch_major);
+	input_report_abs(input, ABS_MT_PRESSURE, pressure);
+}
+
+/* Required for Synaptics Palm Detection */
+static void asus_report_tool_width(struct input_dev *input)
+{
+	struct input_mt *mt = input->mt;
+	struct input_mt_slot *oldest;
+	int oldid, count, i;
+
+	oldest = NULL;
+	oldid = mt->trkid;
+	count = 0;
+
+	for (i = 0; i < mt->num_slots; ++i) {
+		struct input_mt_slot *ps = &mt->slots[i];
+		int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
+
+		if (id < 0)
+			continue;
+		if ((id - oldid) & TRKID_SGN) {
+			oldest = ps;
+			oldid = id;
+		}
+		count++;
+	}
+
+	if (oldest) {
+		input_report_abs(input, ABS_TOOL_WIDTH,
+			input_mt_get_value(oldest, ABS_MT_TOUCH_MAJOR));
+	}
+}
+
+static void asus_report_input(struct input_dev *input, u8 *data)
+{
+	int i;
+	u8 *contactData = data + 2;
+
+	for (i = 0; i < MAX_CONTACTS; i++) {
+		bool down = !!(data[1] & BIT(i+3));
+		int toolType = contactData[3] & CONTACT_TOOL_TYPE_MASK ?
+						MT_TOOL_PALM : MT_TOOL_FINGER;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, toolType, down);
+
+		if (down) {
+			asus_report_contact_down(input, toolType, contactData);
+			contactData += CONTACT_DATA_SIZE;
+		}
+	}
+
+	input_report_key(input, BTN_LEFT, data[1] & BTN_LEFT_MASK);
+	asus_report_tool_width(input);
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+}
+
+static int asus_raw_event(struct hid_device *hdev,
+		struct hid_report *report, u8 *data, int size)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH &&
+					 data[0] == INPUT_REPORT_ID &&
+						size == INPUT_REPORT_SIZE) {
+		asus_report_input(drvdata->input, data);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
+		int ret;
+		struct input_dev *input = hi->input;
+
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0, MAX_X, 0, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, MAX_Y, 0, 0);
+		input_set_abs_params(input, ABS_TOOL_WIDTH, 0, MAX_TOUCH_MAJOR, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, MAX_TOUCH_MAJOR, 0, 0);
+		input_set_abs_params(input, ABS_MT_PRESSURE, 0, MAX_PRESSURE, 0, 0);
+
+		__set_bit(BTN_LEFT, input->keybit);
+		__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+
+		ret = input_mt_init_slots(input, MAX_CONTACTS, INPUT_MT_POINTER);
+
+		if (ret) {
+			hid_err(hdev, "Asus input mt init slots failed: %d\n", ret);
+			return ret;
+		}
+
+		drvdata->input = input;
+	}
+
+	return 0;
+}
+
+static int asus_input_mapping(struct hid_device *hdev,
+		struct hid_input *hi, struct hid_field *field,
+		struct hid_usage *usage, unsigned long **bit,
+		int *max)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_SKIP_INPUT_MAPPING) {
+		/* Don't map anything from the HID report.
+		 * We do it all manually in asus_input_configured
+		 */
+		return -1;
+	}
+
+	return 0;
+}
+
+static int asus_start_multitouch(struct hid_device *hdev)
+{
+	int ret;
+	const unsigned char buf[] = { FEATURE_REPORT_ID, 0x00, 0x03, 0x01, 0x00 };
+	unsigned char *dmabuf = kmemdup(buf, sizeof(buf), GFP_KERNEL);
+
+	if (!dmabuf) {
+		ret = -ENOMEM;
+		hid_err(hdev, "Asus failed to alloc dma buf: %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_raw_request(hdev, dmabuf[0], dmabuf, sizeof(buf),
+					HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+
+	kfree(dmabuf);
+
+	if (ret != sizeof(buf)) {
+		hid_err(hdev, "Asus failed to start multitouch: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused asus_reset_resume(struct hid_device *hdev)
+{
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH)
+		return asus_start_multitouch(hdev);
+
+	return 0;
+}
+
+static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct asus_drvdata *drvdata;
+
+	drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (drvdata == NULL) {
+		hid_err(hdev, "Can't alloc Asus descriptor\n");
+		return -ENOMEM;
+	}
+
+	hid_set_drvdata(hdev, drvdata);
+
+	drvdata->quirks = id->driver_data;
+
+	if (drvdata->quirks & QUIRK_NO_INIT_REPORTS)
+		hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "Asus hid parse failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (ret) {
+		hid_err(hdev, "Asus hw start failed: %d\n", ret);
+		return ret;
+	}
+
+	if (!drvdata->input) {
+		hid_err(hdev, "Asus input not registered\n");
+		ret = -ENOMEM;
+		goto err_stop_hw;
+	}
+
+	drvdata->input->name = "Asus TouchPad";
+
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
+		ret = asus_start_multitouch(hdev);
+		if (ret)
+			goto err_stop_hw;
+	}
+
+	return 0;
+err_stop_hw:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
 static __u8 *asus_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 		unsigned int *rsize)
 {
-	if (*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x65) {
+	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
+
+	if (drvdata->quirks & QUIRK_FIX_NOTEBOOK_REPORT &&
+			*rsize >= 56 && rdesc[54] == 0x25 && rdesc[55] == 0x65) {
 		hid_info(hdev, "Fixing up Asus notebook report descriptor\n");
 		rdesc[55] = 0xdd;
 	}
@@ -37,15 +314,25 @@ static __u8 *asus_report_fixup(struct hi
 }
 
 static const struct hid_device_id asus_devices[] = {
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
+		 USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), NOTEBOOK_QUIRKS},
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
+			 USB_DEVICE_ID_ASUSTEK_TOUCHPAD), TOUCHPAD_QUIRKS },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, asus_devices);
 
 static struct hid_driver asus_driver = {
-	.name = "asus",
-	.id_table = asus_devices,
-	.report_fixup = asus_report_fixup
+	.name			= "asus",
+	.id_table		= asus_devices,
+	.report_fixup		= asus_report_fixup,
+	.probe                  = asus_probe,
+	.input_mapping          = asus_input_mapping,
+	.input_configured       = asus_input_configured,
+#ifdef CONFIG_PM
+	.reset_resume           = asus_reset_resume,
+#endif
+	.raw_event		= asus_raw_event
 };
 module_hid_driver(asus_driver);
 
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1856,6 +1856,7 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD) },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_TOUCHPAD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AUREAL, USB_DEVICE_ID_AUREAL_W01RN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BETOP_2185BFM, 0x2208) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -174,6 +174,7 @@
 #define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
 #define USB_DEVICE_ID_ASUSTEK_LCM2	0x175b
 #define USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD	0x8585
+#define USB_DEVICE_ID_ASUSTEK_TOUCHPAD	0x0101
 
 #define USB_VENDOR_ID_ATEN		0x0557
 #define USB_DEVICE_ID_ATEN_UC100KM	0x2004

[PATCH 4.9 095/152] HID: asus: Fix keyboard support

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brendan McGrath <redmcg@redmandi.dyndns.org>

[ Upstream commit c8b1b3dd89ea7b3f77a73e59c4c4495e16338e15 ]

The previous submission which added Touchpad support broke the
Keyboard support of this driver. This patch:
1. fixes the Keyboard support (by assigning drvdata->input);
2. renames NOTEBOOK_QUIRKS to KEYBOARD_QUIRKS;
3. adds the NO_INIT_REPORT quirk to the KEYBOARD_QUIRKS; and
4. sets the input->name to 'Asus Keyboard' for the keyboard

Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-asus.c |   17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -64,7 +64,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard an
 #define QUIRK_SKIP_INPUT_MAPPING	BIT(2)
 #define QUIRK_IS_MULTITOUCH		BIT(3)
 
-#define NOTEBOOK_QUIRKS			QUIRK_FIX_NOTEBOOK_REPORT
+#define KEYBOARD_QUIRKS			(QUIRK_FIX_NOTEBOOK_REPORT | \
+						 QUIRK_NO_INIT_REPORTS)
 #define TOUCHPAD_QUIRKS			(QUIRK_NO_INIT_REPORTS | \
 						 QUIRK_SKIP_INPUT_MAPPING | \
 						 QUIRK_IS_MULTITOUCH)
@@ -170,11 +171,11 @@ static int asus_raw_event(struct hid_dev
 
 static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
 {
+	struct input_dev *input = hi->input;
 	struct asus_drvdata *drvdata = hid_get_drvdata(hdev);
 
 	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
 		int ret;
-		struct input_dev *input = hi->input;
 
 		input_set_abs_params(input, ABS_MT_POSITION_X, 0, MAX_X, 0, 0);
 		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, MAX_Y, 0, 0);
@@ -191,10 +192,10 @@ static int asus_input_configured(struct
 			hid_err(hdev, "Asus input mt init slots failed: %d\n", ret);
 			return ret;
 		}
-
-		drvdata->input = input;
 	}
 
+	drvdata->input = input;
+
 	return 0;
 }
 
@@ -286,7 +287,11 @@ static int asus_probe(struct hid_device
 		goto err_stop_hw;
 	}
 
-	drvdata->input->name = "Asus TouchPad";
+	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
+		drvdata->input->name = "Asus TouchPad";
+	} else {
+		drvdata->input->name = "Asus Keyboard";
+	}
 
 	if (drvdata->quirks & QUIRK_IS_MULTITOUCH) {
 		ret = asus_start_multitouch(hdev);
@@ -315,7 +320,7 @@ static __u8 *asus_report_fixup(struct hi
 
 static const struct hid_device_id asus_devices[] = {
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
-		 USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), NOTEBOOK_QUIRKS},
+		 USB_DEVICE_ID_ASUSTEK_NOTEBOOK_KEYBOARD), KEYBOARD_QUIRKS},
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ASUSTEK,
 			 USB_DEVICE_ID_ASUSTEK_TOUCHPAD), TOUCHPAD_QUIRKS },
 	{ }

[PATCH 4.9 096/152] HID: microsoft: Add Surface 4 type cover pro 4 not JP versions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Keller <daniel.keller@gcd.de>

[ Upstream commit 2ae3986b84e9d325bc92a1efbcf0c6b0f5016b35 ]

Adding support for not JP versions of the Microsoft Surface 4 Type Cover Pro

[jkosina@suse.cz: The identical patch has been sent by Jeff Farthing, so I am
 including his signoff as well]

Signed-off-by: Jeff Farthing <jeff@jfarthing.com>
Signed-off-by: Daniel Keller <daniel.keller@gcd.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-core.c          |    4 ++++
 drivers/hid/hid-ids.h           |    2 ++
 drivers/hid/hid-microsoft.c     |    4 ++++
 drivers/hid/usbhid/hid-quirks.c |    2 ++
 4 files changed, 12 insertions(+)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -727,6 +727,8 @@ static void hid_scan_collection(struct h
 	    (hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
+	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 ||
+	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
 	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
 	    hid->group == HID_GROUP_MULTITOUCH)
@@ -1983,6 +1985,8 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -724,6 +724,8 @@
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3    0x07dc
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2  0x07e2
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
+#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 0x07e4
+#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 0x07e8
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
 #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
 
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -280,6 +280,10 @@ static const struct hid_device_id ms_dev
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP),
 		.driver_data = MS_HIDINPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4),
+		.driver_data = MS_HIDINPUT },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2),
+		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -104,6 +104,8 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },

[PATCH 4.9 097/152] HID: multitouch: enable the Surface 4 Type Cover Pro (JP) to report multitouch data

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yuta Kobayashi <alu.ula@outlook.com>

[ Upstream commit 4fed0231994b27b3896bc63885ac66d02fff625b ]

Since commit 8fe89ef076fa1 ("HID: multitouch: enable the Surface 3 Type
Cover to report multitouch data"), the TypeCover can be properly handled
by hid-multitouch and don't require any special quirk in the kernel.

Remove the support of the Surface 4 Type Cover Pro (JP) from
hid-microsoft so it can properly report multitouch from the touchpad.

Signed-off-by: Yuta Kobayashi <alu.ula@outlook.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-core.c          |    2 --
 drivers/hid/hid-ids.h           |    1 -
 drivers/hid/hid-microsoft.c     |    2 --
 drivers/hid/usbhid/hid-quirks.c |    1 -
 4 files changed, 6 deletions(-)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -729,7 +729,6 @@ static void hid_scan_collection(struct h
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 ||
 	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 ||
-	     hid->product == USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP ||
 	     hid->product == USB_DEVICE_ID_MS_POWER_COVER) &&
 	    hid->group == HID_GROUP_MULTITOUCH)
 		hid->group = HID_GROUP_GENERIC;
@@ -1987,7 +1986,6 @@ static const struct hid_device_id hid_ha
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_7K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_600) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3KV1) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -726,7 +726,6 @@
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP 0x07dd
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4 0x07e4
 #define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2 0x07e8
-#define USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP 0x07e9
 #define USB_DEVICE_ID_MS_POWER_COVER     0x07da
 
 #define USB_VENDOR_ID_MOJO		0x8282
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -284,8 +284,6 @@ static const struct hid_device_id ms_dev
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2),
 		.driver_data = MS_HIDINPUT },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP),
-		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER),
 		.driver_data = MS_HIDINPUT },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_KEYBOARD),
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -106,7 +106,6 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_3_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_2, HID_QUIRK_NO_INIT_REPORTS },
-	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_PRO_4_JP, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_POWER_COVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },

[PATCH 4.9 098/152] nvme: simplify stripe quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Keith Busch <keith.busch@intel.com>

[ Upstream commit e6282aef7b89a11d26e731060c4409b7aac278bf ]

Some OEMs believe they own the Identify Controller vendor specific
region and will repurpose it with their own values. While not common,
we can't rely on the PCI VID:DID to tell use how to decode the field
we reserved for this as the stripe size so we need to do something else
for the list of devices using this quirk.

The field was supposed to allow flexibility on the device's back-end
striping, but it turned out that never materialized; the chunk is always
the same as MDTS in the products subscribing to this quirk, so this
patch removes the stripe_size field and sets the chunk to the max hw
transfer size for the devices using this quirk.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/core.c |   17 ++---------------
 drivers/nvme/host/nvme.h |    1 -
 2 files changed, 2 insertions(+), 16 deletions(-)

--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1204,8 +1204,8 @@ static void nvme_set_queue_limits(struct
 		blk_queue_max_hw_sectors(q, ctrl->max_hw_sectors);
 		blk_queue_max_segments(q, min_t(u32, max_segments, USHRT_MAX));
 	}
-	if (ctrl->stripe_size)
-		blk_queue_chunk_sectors(q, ctrl->stripe_size >> 9);
+	if (ctrl->quirks & NVME_QUIRK_STRIPE_SIZE)
+		blk_queue_chunk_sectors(q, ctrl->max_hw_sectors);
 	blk_queue_virt_boundary(q, ctrl->page_size - 1);
 	if (ctrl->vwc & NVME_CTRL_VWC_PRESENT)
 		vwc = true;
@@ -1261,19 +1261,6 @@ int nvme_init_identify(struct nvme_ctrl
 	ctrl->max_hw_sectors =
 		min_not_zero(ctrl->max_hw_sectors, max_hw_sectors);
 
-	if ((ctrl->quirks & NVME_QUIRK_STRIPE_SIZE) && id->vs[3]) {
-		unsigned int max_hw_sectors;
-
-		ctrl->stripe_size = 1 << (id->vs[3] + page_shift);
-		max_hw_sectors = ctrl->stripe_size >> (page_shift - 9);
-		if (ctrl->max_hw_sectors) {
-			ctrl->max_hw_sectors = min(max_hw_sectors,
-							ctrl->max_hw_sectors);
-		} else {
-			ctrl->max_hw_sectors = max_hw_sectors;
-		}
-	}
-
 	nvme_set_queue_limits(ctrl, ctrl->admin_q);
 	ctrl->sgls = le32_to_cpu(id->sgls);
 	ctrl->kas = le16_to_cpu(id->kas);
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -121,7 +121,6 @@ struct nvme_ctrl {
 
 	u32 page_size;
 	u32 max_hw_sectors;
-	u32 stripe_size;
 	u16 oncs;
 	u16 vid;
 	atomic_t abort_limit;

[PATCH 4.9 099/152] ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

[ Upstream commit 9c4aa1eecb48cfac18ed5e3aca9d9ae58fbafc11 ]

Sometimes, the users may require a quirk to be provided from ACPI subsystem
core to prevent a GPE from flooding.
Normally, if a GPE cannot be dispatched, ACPICA core automatically prevents
the GPE from firing. But there are cases the GPE is dispatched by _Lxx/_Exx
provided via AML table, and OSPM is lacking of the knowledge to get
_Lxx/_Exx correctly executed to handle the GPE, thus the GPE flooding may
still occur.

The existing quirk mechanism can be enabled/disabled using the following
commands to prevent such kind of GPE flooding during runtime:
 # echo mask > /sys/firmware/acpi/interrupts/gpe00
 # echo unmask > /sys/firmware/acpi/interrupts/gpe00
To avoid GPE flooding during boot, we need a boot stage mechanism.

This patch provides such a boot stage quirk mechanism to stop this kind of
GPE flooding. This patch doesn't fix any feature gap but since the new
feature gaps could be found in the future endlessly, and can disappear if
the feature gaps are filled, providing a boot parameter rather than a DMI
table should suffice.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=53071
Link: https://bugzilla.kernel.org/show_bug.cgi?id=117481
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/887793
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/kernel-parameters.txt |   10 ++++++
 drivers/acpi/internal.h             |    1 
 drivers/acpi/scan.c                 |    1 
 drivers/acpi/sysfs.c                |   56 ++++++++++++++++++++++++++++++++++++
 4 files changed, 68 insertions(+)

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -305,6 +305,16 @@ bytes respectively. Such letter suffixes
 			use by PCI
 			Format: <irq>,<irq>...
 
+	acpi_mask_gpe=  [HW,ACPI]
+			Due to the existence of _Lxx/_Exx, some GPEs triggered
+			by unsupported hardware/firmware features can result in
+                        GPE floodings that cannot be automatically disabled by
+                        the GPE dispatcher.
+			This facility can be used to prevent such uncontrolled
+			GPE floodings.
+			Format: <int>
+			Support masking of GPEs numbered from 0x00 to 0x7f.
+
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
 			AML control methods that contain the opcodes to create
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -37,6 +37,7 @@ void acpi_amba_init(void);
 static inline void acpi_amba_init(void) {}
 #endif
 int acpi_sysfs_init(void);
+void acpi_gpe_apply_masked_gpes(void);
 void acpi_container_init(void);
 void acpi_memory_hotplug_init(void);
 #ifdef	CONFIG_ACPI_HOTPLUG_IOAPIC
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -2044,6 +2044,7 @@ int __init acpi_scan_init(void)
 		}
 	}
 
+	acpi_gpe_apply_masked_gpes();
 	acpi_update_all_gpes();
 	acpi_ec_ecdt_start();
 
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -708,6 +708,62 @@ end:
 	return result ? result : size;
 }
 
+/*
+ * A Quirk Mechanism for GPE Flooding Prevention:
+ *
+ * Quirks may be needed to prevent GPE flooding on a specific GPE. The
+ * flooding typically cannot be detected and automatically prevented by
+ * ACPI_GPE_DISPATCH_NONE check because there is a _Lxx/_Exx prepared in
+ * the AML tables. This normally indicates a feature gap in Linux, thus
+ * instead of providing endless quirk tables, we provide a boot parameter
+ * for those who want this quirk. For example, if the users want to prevent
+ * the GPE flooding for GPE 00, they need to specify the following boot
+ * parameter:
+ *   acpi_mask_gpe=0x00
+ * The masking status can be modified by the following runtime controlling
+ * interface:
+ *   echo unmask > /sys/firmware/acpi/interrupts/gpe00
+ */
+
+/*
+ * Currently, the GPE flooding prevention only supports to mask the GPEs
+ * numbered from 00 to 7f.
+ */
+#define ACPI_MASKABLE_GPE_MAX	0x80
+
+static u64 __initdata acpi_masked_gpes;
+
+static int __init acpi_gpe_set_masked_gpes(char *val)
+{
+	u8 gpe;
+
+	if (kstrtou8(val, 0, &gpe) || gpe > ACPI_MASKABLE_GPE_MAX)
+		return -EINVAL;
+	acpi_masked_gpes |= ((u64)1<<gpe);
+
+	return 1;
+}
+__setup("acpi_mask_gpe=", acpi_gpe_set_masked_gpes);
+
+void __init acpi_gpe_apply_masked_gpes(void)
+{
+	acpi_handle handle;
+	acpi_status status;
+	u8 gpe;
+
+	for (gpe = 0;
+	     gpe < min_t(u8, ACPI_MASKABLE_GPE_MAX, acpi_current_gpe_count);
+	     gpe++) {
+		if (acpi_masked_gpes & ((u64)1<<gpe)) {
+			status = acpi_get_gpe_device(gpe, &handle);
+			if (ACPI_SUCCESS(status)) {
+				pr_info("Masking GPE 0x%x.\n", gpe);
+				(void)acpi_mask_gpe(handle, gpe, TRUE);
+			}
+		}
+	}
+}
+
 void acpi_irq_stats_init(void)
 {
 	acpi_status status;

[PATCH 4.9 100/152] HID: usbhid: Add quirk for the Futaba TOSD-5711BB VFD

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Wood <thetewood@gmail.com>

[ Upstream commit f83f90cf7ba68deb09406ea9da80852a64c4db29 ]

The Futaba TOSD-5711BB VFD crashes when the initial HID report is requested,
register the display in hid-ids and tell hid-quirks to not do the init.

Signed-off-by: Alex Wood <thetewood@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-ids.h           |    3 +++
 drivers/hid/usbhid/hid-quirks.c |    1 +
 2 files changed, 4 insertions(+)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -368,6 +368,9 @@
 #define USB_VENDOR_ID_FLATFROG		0x25b5
 #define USB_DEVICE_ID_MULTITOUCH_3200	0x0002
 
+#define USB_VENDOR_ID_FUTABA            0x0547
+#define USB_DEVICE_ID_LED_DISPLAY       0x7000
+
 #define USB_VENDOR_ID_ESSENTIAL_REALITY	0x0d7f
 #define USB_DEVICE_ID_ESSENTIAL_REALITY_P5 0x0100
 
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -89,6 +89,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_FUTABA, USB_DEVICE_ID_LED_DISPLAY, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0A4A, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL },

[PATCH 4.9 101/152] HID: usbhid: Add quirk for Mayflash/Dragonrise DolphinBar.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marcel Hasler <mahasler@gmail.com>

[ Upstream commit 8aa2cc7e747881d1fd52db28261b201d4e3e5565 ]

The DolphinBar by Mayflash (identified as Dragonrise) needs
HID_QUIRK_MULTI_INPUT to split it up into four input devices. Without this
quirk the adapter is falsely recognized as a tablet. See also bug 115841
(https://bugzilla.kernel.org/show_bug.cgi?id=115841).

Signed-off-by: Marcel Hasler <mahasler@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/hid-ids.h           |    1 +
 drivers/hid/usbhid/hid-quirks.c |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -322,6 +322,7 @@
 #define USB_VENDOR_ID_DRAGONRISE		0x0079
 #define USB_DEVICE_ID_DRAGONRISE_WIIU		0x1800
 #define USB_DEVICE_ID_DRAGONRISE_PS3		0x1801
+#define USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR	0x1803
 #define USB_DEVICE_ID_DRAGONRISE_GAMECUBE	0x1843
 
 #define USB_VENDOR_ID_DWAV		0x0eef
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -84,6 +84,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },

[PATCH 4.9 102/152] drm/edid: constify edid quirk list

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jani Nikula <jani.nikula@intel.com>

[ Upstream commit 23c4cfbdab494568600ae6073a2bf02be4b10f4e ]

No reason not to be const.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482923186-22430-1-git-send-email-jani.nikula@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/drm_edid.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -90,7 +90,7 @@ struct detailed_mode_closure {
 #define LEVEL_GTF2	2
 #define LEVEL_CVT	3
 
-static struct edid_quirk {
+static const struct edid_quirk {
 	char vendor[4];
 	int product_id;
 	u32 quirks;
@@ -1449,7 +1449,7 @@ EXPORT_SYMBOL(drm_edid_duplicate);
  *
  * Returns true if @vendor is in @edid, false otherwise
  */
-static bool edid_vendor(struct edid *edid, char *vendor)
+static bool edid_vendor(struct edid *edid, const char *vendor)
 {
 	char edid_vendor[3];
 
@@ -1469,7 +1469,7 @@ static bool edid_vendor(struct edid *edi
  */
 static u32 edid_get_quirks(struct edid *edid)
 {
-	struct edid_quirk *quirk;
+	const struct edid_quirk *quirk;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {

[PATCH 4.9 103/152] drm/i915: fix INTEL_BDW_IDS definition

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

[ Upstream commit 7fbd995ce4241e98d30859405504c3fb279c4ccb ]

Remove duplicated IDs from the list. Currently, this definition is
only used by early-quirks.c. From my understanding of the code, having
duplicated IDs shouldn't be causing any bugs.

Fixes: 8d9c20e1d1e3 ("drm/i915: Remove .is_mobile field from platform struct")
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-1-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/drm/i915_pciids.h |    2 --
 1 file changed, 2 deletions(-)

--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -240,8 +240,6 @@
 	INTEL_BDW_GT12_IDS(info), \
 	INTEL_BDW_GT3_IDS(info), \
 	INTEL_BDW_RSVDM_IDS(info), \
-	INTEL_BDW_GT12_IDS(info), \
-	INTEL_BDW_GT3_IDS(info), \
 	INTEL_BDW_RSVDD_IDS(info)
 
 #define INTEL_CHV_IDS(info) \

[PATCH 4.9 104/152] drm/i915: more .is_mobile cleanups for BDW

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

[ Upstream commit 0784bc624ae9be4269f8129572ee164ca680ca7c ]

Commit 8d9c20e1d1e3 ("drm/i915: Remove .is_mobile field from platform
struct") removed mobile vs desktop differences for HSW+, but forgot
the Broadwell reserved IDs, so do it now.

It's interesting to notice that these IDs are used by early-quirks.c
but are *not* used by i915_pci.c.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-2-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/drm/i915_pciids.h |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/include/drm/i915_pciids.h
+++ b/include/drm/i915_pciids.h
@@ -226,21 +226,18 @@
 	INTEL_VGA_DEVICE(0x162A, info), /* Server */ \
 	INTEL_VGA_DEVICE(0x162D, info)  /* Workstation */
 
-#define INTEL_BDW_RSVDM_IDS(info) \
+#define INTEL_BDW_RSVD_IDS(info) \
 	INTEL_VGA_DEVICE(0x1632, info), /* ULT */ \
 	INTEL_VGA_DEVICE(0x1636, info), /* ULT */ \
 	INTEL_VGA_DEVICE(0x163B, info), /* Iris */ \
-	INTEL_VGA_DEVICE(0x163E, info)  /* ULX */
-
-#define INTEL_BDW_RSVDD_IDS(info) \
+	INTEL_VGA_DEVICE(0x163E, info), /* ULX */ \
 	INTEL_VGA_DEVICE(0x163A, info), /* Server */ \
 	INTEL_VGA_DEVICE(0x163D, info)  /* Workstation */
 
 #define INTEL_BDW_IDS(info) \
 	INTEL_BDW_GT12_IDS(info), \
 	INTEL_BDW_GT3_IDS(info), \
-	INTEL_BDW_RSVDM_IDS(info), \
-	INTEL_BDW_RSVDD_IDS(info)
+	INTEL_BDW_RSVD_IDS(info)
 
 #define INTEL_CHV_IDS(info) \
 	INTEL_VGA_DEVICE(0x22b0, info), \

[PATCH 4.9 105/152] drm/i915: actually drive the BDW reserved IDs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

[ Upstream commit 98b2f01c8dfc8922a2af1fe82a1c40cac4911634 ]

Back in 2014, commit fb7023e0e248 ("drm/i915: BDW: Adding Reserved PCI
IDs.") added the reserved PCI IDs in order to try to make sure we had
working drivers in case we ever released products using these IDs
(since we had instances of this type of problem in the past). The
problem is that the patch only touched the macros used by
early-quirks.c and by the user space components that rely on
i915_pciids.h, it didn't touch the macros used by i915_pci.c. So we
correctly handled the stolen memory for these theoretical IDs, but we
didn't actually drive the devices from i915.ko.

So this patch fixes the original commit by actually making i915.ko
drive these IDs, which was the goal. There's no information on what
would be the GT count on these IDs, so we just go with the safer
intel_broadwell_info, at the risk of ignoring a possibly inexistent
BSD2_RING.

I did some checking, and it seems that these IDs are driven by
intel-gpu-tools, xf86-video-intel and libdrm (since they contain old
copies of i915_pciids.h), but they are not checked by mesa.

The alternative to this patch would be to just assume we're actually
never going to use these IDs, and then remove them from our ID lists
and make sure our user space components sync the latest i915_pciids.h
copy. I'm fine with either approaches, as long as we make sure that
every component tries to drive the same list of PCI IDs.

Fixes: fb7023e0e248 ("drm/i915: BDW: Adding Reserved PCI IDs.")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1483473860-17644-3-git-send-email-paulo.r.zanoni@intel.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/i915/i915_pci.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -417,6 +417,7 @@ static const struct pci_device_id pciidl
 	INTEL_VLV_IDS(&intel_valleyview_info),
 	INTEL_BDW_GT12_IDS(&intel_broadwell_info),
 	INTEL_BDW_GT3_IDS(&intel_broadwell_gt3_info),
+	INTEL_BDW_RSVD_IDS(&intel_broadwell_info),
 	INTEL_CHV_IDS(&intel_cherryview_info),
 	INTEL_SKL_GT1_IDS(&intel_skylake_info),
 	INTEL_SKL_GT2_IDS(&intel_skylake_info),

[PATCH 4.9 106/152] ASoC: Intel: bytcr_rt5640: quirks for Insyde devices

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: youling257 <youling257@gmail.com>

[ Upstream commit 571800487837263e914ef68681e4ad6a57d49c7f ]

There are literally dozens of Insyde devices with a different
name but with the same audio routing. Use a generic quirk to
match on vendor name only to avoid recurring edits of the
same thing.

Signed-off-by: youling257 <youling257@gmail.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/boards/bytcr_rt5640.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -387,6 +387,16 @@ static const struct dmi_system_id byt_rt
 						 BYT_RT5640_SSP0_AIF1),
 
 	},
+	{
+		.callback = byt_rt5640_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+		},
+		.driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP |
+						 BYT_RT5640_MCLK_EN |
+						 BYT_RT5640_SSP0_AIF1),
+
+	},
 	{}
 };
 

[PATCH 4.9 107/152] scsi: ufs: introduce a new ufshcd_statea UFSHCD_STATE_EH_SCHEDULED

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zang Leigang <zangleigang@hisilicon.com>

[ Upstream commit 141f81651037ea109188a6bafdc5c9a318bd5a46 ]

Add a new ufshcd_state, indicats that an err handler may get to run
immediately. Use UFSHCD_STATE_ERROR here looks not literaly correct.

Signed-off-by: Zang Leigang <zangleigang@hisilicon.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -123,6 +123,7 @@ enum {
 	UFSHCD_STATE_RESET,
 	UFSHCD_STATE_ERROR,
 	UFSHCD_STATE_OPERATIONAL,
+	UFSHCD_STATE_EH_SCHEDULED,
 };
 
 /* UFSHCD error handling flags */
@@ -1439,6 +1440,7 @@ static int ufshcd_queuecommand(struct Sc
 	switch (hba->ufshcd_state) {
 	case UFSHCD_STATE_OPERATIONAL:
 		break;
+	case UFSHCD_STATE_EH_SCHEDULED:
 	case UFSHCD_STATE_RESET:
 		err = SCSI_MLQUEUE_HOST_BUSY;
 		goto out_unlock;
@@ -4196,7 +4198,7 @@ static void ufshcd_check_errors(struct u
 			/* block commands from scsi mid-layer */
 			scsi_block_requests(hba->host);
 
-			hba->ufshcd_state = UFSHCD_STATE_ERROR;
+			hba->ufshcd_state = UFSHCD_STATE_EH_SCHEDULED;
 			schedule_work(&hba->eh_work);
 		}
 	}

[PATCH 4.9 108/152] scsi: ufs: issue link starup 2 times if device isnt active

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "subhashj@codeaurora.org" <subhashj@codeaurora.org>

[ Upstream commit 7caf489b99a42a9017ef3d733912aea8794677e7 ]

If we issue the link startup to the device while its UniPro state is
LinkDown (and device state is sleep/power-down) then link startup
will not move the device state to Active. Device will only move to
active state if the link starup is issued when its UniPro state is
LinkUp. So in this case, we would have to issue the link startup 2
times to make sure that device moves to active state.

Reviewed-by: Gilad Broner <gbroner@codeaurora.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd.c |   23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3130,7 +3130,16 @@ static int ufshcd_link_startup(struct uf
 {
 	int ret;
 	int retries = DME_LINKSTARTUP_RETRIES;
+	bool link_startup_again = false;
 
+	/*
+	 * If UFS device isn't active then we will have to issue link startup
+	 * 2 times to make sure the device state move to active.
+	 */
+	if (!ufshcd_is_ufs_dev_active(hba))
+		link_startup_again = true;
+
+link_startup:
 	do {
 		ufshcd_vops_link_startup_notify(hba, PRE_CHANGE);
 
@@ -3156,6 +3165,12 @@ static int ufshcd_link_startup(struct uf
 		/* failed to get the link up... retire */
 		goto out;
 
+	if (link_startup_again) {
+		link_startup_again = false;
+		retries = DME_LINKSTARTUP_RETRIES;
+		goto link_startup;
+	}
+
 	if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) {
 		ret = ufshcd_disable_device_tx_lcc(hba);
 		if (ret)
@@ -6630,10 +6645,12 @@ int ufshcd_init(struct ufs_hba *hba, voi
 	pm_runtime_get_sync(dev);
 
 	/*
-	 * The device-initialize-sequence hasn't been invoked yet.
-	 * Set the device to power-off state
+	 * We are assuming that device wasn't put in sleep/power-down
+	 * state exclusively during the boot stage before kernel.
+	 * This assumption helps avoid doing link startup twice during
+	 * ufshcd_probe_hba().
 	 */
-	ufshcd_set_ufs_dev_poweroff(hba);
+	ufshcd_set_ufs_dev_active(hba);
 
 	async_schedule(ufshcd_async_scan, hba);
 

[PATCH 4.9 109/152] ARM: OMAP2+: Fix init for multiple quirks for the same SoC

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 6e613ebf4405fc09e2a8c16ed193b47f80a3cbed ]

It's possible that there are multiple quirks that need to be initialized
for the same SoC. Fix the issue by not returning on the first match.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-omap2/pdata-quirks.c |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -600,7 +600,6 @@ static void pdata_quirks_check(struct pd
 		if (of_machine_is_compatible(quirks->compatible)) {
 			if (quirks->fn)
 				quirks->fn();
-			break;
 		}
 		quirks++;
 	}

[PATCH 4.9 110/152] usb: chipidea: msm: Rely on core to override AHBBURST

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <stephen.boyd@linaro.org>

[ Upstream commit dd3749099cfa2c80039193c438b90f3160eaf7f9 ]

The core framework already handles setting this parameter with a
platform quirk. Add the appropriate flag so that we always set
AHBBURST to 0. Technically DT should be doing this, but we always
do it for msm chipidea devices so setting the flag in the driver
works just as well. If the burst needs to be anything besides 0,
we expect the 'ahb-burst-config' dts property to be present.

Acked-by: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/chipidea/ci_hdrc_msm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -24,7 +24,6 @@ static void ci_hdrc_msm_notify_event(str
 	switch (event) {
 	case CI_HDRC_CONTROLLER_RESET_EVENT:
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
-		writel(0, USB_AHBBURST);
 		/* use AHB transactor, allow posted data writes */
 		writel(0x8, USB_AHBMODE);
 		usb_phy_init(ci->usb_phy);
@@ -47,7 +46,8 @@ static struct ci_hdrc_platform_data ci_h
 	.name			= "ci_hdrc_msm",
 	.capoffset		= DEF_CAPOFFSET,
 	.flags			= CI_HDRC_REGS_SHARED |
-				  CI_HDRC_DISABLE_STREAMING,
+				  CI_HDRC_DISABLE_STREAMING |
+				  CI_HDRC_OVERRIDE_AHB_BURST,
 
 	.notify_event		= ci_hdrc_msm_notify_event,
 };

[PATCH 4.9 111/152] serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit b6ffcf21082300519bc4f9c3d24f61207cc9eae4 ]

UART uses as EDMA as dma engine on AM437x SoC and therefore, requires
OMAP_DMA_TX_KICK quirk just like AM33xx. So, enable OMAP_DMA_TX_KICK
quirk for AM437x platform as well. While at that, drop use of
of_machine_is_compatible() and instead pass quirks via device data.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_omap.c |    9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1075,15 +1075,15 @@ static int omap8250_no_handle_irq(struct
 }
 
 static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
-static const u8 am4372_habit = UART_ERRATA_CLOCK_DISABLE;
+static const u8 dra742_habit = UART_ERRATA_CLOCK_DISABLE;
 
 static const struct of_device_id omap8250_dt_ids[] = {
 	{ .compatible = "ti,omap2-uart" },
 	{ .compatible = "ti,omap3-uart" },
 	{ .compatible = "ti,omap4-uart" },
 	{ .compatible = "ti,am3352-uart", .data = &am3352_habit, },
-	{ .compatible = "ti,am4372-uart", .data = &am4372_habit, },
-	{ .compatible = "ti,dra742-uart", .data = &am4372_habit, },
+	{ .compatible = "ti,am4372-uart", .data = &am3352_habit, },
+	{ .compatible = "ti,dra742-uart", .data = &dra742_habit, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
@@ -1218,9 +1218,6 @@ static int omap8250_probe(struct platfor
 			priv->omap8250_dma.rx_size = RX_TRIGGER;
 			priv->omap8250_dma.rxconf.src_maxburst = RX_TRIGGER;
 			priv->omap8250_dma.txconf.dst_maxburst = TX_TRIGGER;
-
-			if (of_machine_is_compatible("ti,am33xx"))
-				priv->habit |= OMAP_DMA_TX_KICK;
 			/*
 			 * pause is currently not supported atleast on omap-sdma
 			 * and edma on most earlier kernels.

[PATCH 4.9 112/152] Input: gpio_keys - add support for GPIO descriptors

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 5feeca3c1e39c01f9ef5abc94dea94021ccf94fc ]

GPIO descriptors are the preferred way over legacy GPIO numbers
nowadays. Convert the driver to use GPIO descriptors internally but
still allow passing legacy GPIO numbers from platform data to support
existing platforms.

Based on commits 633a21d80b4a2cd6 ("input: gpio_keys_polled: Add support
for GPIO descriptors") and 1ae5ddb6f8837558 ("Input: gpio_keys_polled -
request GPIO pin as input.").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/keyboard/gpio_keys.c |   37 ++++++++++++++++++++++++++-----------
 1 file changed, 26 insertions(+), 11 deletions(-)

--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -26,6 +26,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
@@ -35,6 +36,7 @@
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
 	struct input_dev *input;
+	struct gpio_desc *gpiod;
 
 	struct timer_list release_timer;
 	unsigned int release_delay;	/* in msecs, for IRQ-only buttons */
@@ -140,7 +142,7 @@ static void gpio_keys_disable_button(str
 		 */
 		disable_irq(bdata->irq);
 
-		if (gpio_is_valid(bdata->button->gpio))
+		if (bdata->gpiod)
 			cancel_delayed_work_sync(&bdata->work);
 		else
 			del_timer_sync(&bdata->release_timer);
@@ -358,19 +360,20 @@ static void gpio_keys_gpio_report_event(
 	const struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
-	int state = gpio_get_value_cansleep(button->gpio);
+	int state;
 
+	state = gpiod_get_value_cansleep(bdata->gpiod);
 	if (state < 0) {
-		dev_err(input->dev.parent, "failed to get gpio state\n");
+		dev_err(input->dev.parent,
+			"failed to get gpio state: %d\n", state);
 		return;
 	}
 
-	state = (state ? 1 : 0) ^ button->active_low;
 	if (type == EV_ABS) {
 		if (state)
 			input_event(input, type, button->code, button->value);
 	} else {
-		input_event(input, type, button->code, !!state);
+		input_event(input, type, button->code, state);
 	}
 	input_sync(input);
 }
@@ -456,7 +459,7 @@ static void gpio_keys_quiesce_key(void *
 {
 	struct gpio_button_data *bdata = data;
 
-	if (gpio_is_valid(bdata->button->gpio))
+	if (bdata->gpiod)
 		cancel_delayed_work_sync(&bdata->work);
 	else
 		del_timer_sync(&bdata->release_timer);
@@ -478,18 +481,30 @@ static int gpio_keys_setup_key(struct pl
 	bdata->button = button;
 	spin_lock_init(&bdata->lock);
 
+	/*
+	 * Legacy GPIO number, so request the GPIO here and
+	 * convert it to descriptor.
+	 */
 	if (gpio_is_valid(button->gpio)) {
+		unsigned flags = GPIOF_IN;
+
+		if (button->active_low)
+			flags |= GPIOF_ACTIVE_LOW;
 
-		error = devm_gpio_request_one(&pdev->dev, button->gpio,
-					      GPIOF_IN, desc);
+		error = devm_gpio_request_one(&pdev->dev, button->gpio, flags,
+					      desc);
 		if (error < 0) {
 			dev_err(dev, "Failed to request GPIO %d, error %d\n",
 				button->gpio, error);
 			return error;
 		}
 
+		bdata->gpiod = gpio_to_desc(button->gpio);
+		if (!bdata->gpiod)
+			return -EINVAL;
+
 		if (button->debounce_interval) {
-			error = gpio_set_debounce(button->gpio,
+			error = gpiod_set_debounce(bdata->gpiod,
 					button->debounce_interval * 1000);
 			/* use timer if gpiolib doesn't provide debounce */
 			if (error < 0)
@@ -500,7 +515,7 @@ static int gpio_keys_setup_key(struct pl
 		if (button->irq) {
 			bdata->irq = button->irq;
 		} else {
-			irq = gpio_to_irq(button->gpio);
+			irq = gpiod_to_irq(bdata->gpiod);
 			if (irq < 0) {
 				error = irq;
 				dev_err(dev,
@@ -575,7 +590,7 @@ static void gpio_keys_report_state(struc
 
 	for (i = 0; i < ddata->pdata->nbuttons; i++) {
 		struct gpio_button_data *bdata = &ddata->data[i];
-		if (gpio_is_valid(bdata->button->gpio))
+		if (bdata->gpiod)
 			gpio_keys_gpio_report_event(bdata);
 	}
 	input_sync(input);

[PATCH 4.9 113/152] amd-xgbe: Prepare for working with more than one type of phy

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Lendacky, Thomas" <Thomas.Lendacky@amd.com>

[ Upstream commit e57f7a3feaef0e9e196801f1625bca1337405421 ]

Prepare the code to be able to work with more than one type of phy by
adding additional callable functions into the phy interface and removing
phy specific settings/functions from non-phy related files.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/amd/xgbe/Makefile       |    3 
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c     |   58 -
 drivers/net/ethernet/amd/xgbe/xgbe-drv.c     |    6 
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c |   19 
 drivers/net/ethernet/amd/xgbe/xgbe-main.c    |  214 ++-----
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c    |  543 +++++------------
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c  |  821 +++++++++++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe.h         |  130 ++--
 8 files changed, 1137 insertions(+), 657 deletions(-)
 create mode 100644 drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c

--- a/drivers/net/ethernet/amd/xgbe/Makefile
+++ b/drivers/net/ethernet/amd/xgbe/Makefile
@@ -2,7 +2,8 @@ obj-$(CONFIG_AMD_XGBE) += amd-xgbe.o
 
 amd-xgbe-objs := xgbe-main.o xgbe-drv.o xgbe-dev.o \
 		 xgbe-desc.o xgbe-ethtool.o xgbe-mdio.o \
-		 xgbe-ptp.o
+		 xgbe-ptp.o \
+		 xgbe-phy-v1.o
 
 amd-xgbe-$(CONFIG_AMD_XGBE_DCB) += xgbe-dcb.o
 amd-xgbe-$(CONFIG_DEBUG_FS) += xgbe-debugfs.o
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -704,32 +704,26 @@ static void xgbe_enable_mac_interrupts(s
 	XGMAC_IOWRITE_BITS(pdata, MMC_TIER, ALL_INTERRUPTS, 0xffffffff);
 }
 
-static int xgbe_set_gmii_speed(struct xgbe_prv_data *pdata)
+static int xgbe_set_speed(struct xgbe_prv_data *pdata, int speed)
 {
-	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x3)
-		return 0;
-
-	XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x3);
-
-	return 0;
-}
-
-static int xgbe_set_gmii_2500_speed(struct xgbe_prv_data *pdata)
-{
-	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0x2)
-		return 0;
+	unsigned int ss;
 
-	XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0x2);
-
-	return 0;
-}
-
-static int xgbe_set_xgmii_speed(struct xgbe_prv_data *pdata)
-{
-	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) == 0)
-		return 0;
+	switch (speed) {
+	case SPEED_1000:
+		ss = 0x03;
+		break;
+	case SPEED_2500:
+		ss = 0x02;
+		break;
+	case SPEED_10000:
+		ss = 0x00;
+		break;
+	default:
+		return -EINVAL;
+	}
 
-	XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, 0);
+	if (XGMAC_IOREAD_BITS(pdata, MAC_TCR, SS) != ss)
+		XGMAC_IOWRITE_BITS(pdata, MAC_TCR, SS, ss);
 
 	return 0;
 }
@@ -2177,19 +2171,7 @@ static void xgbe_config_jumbo_enable(str
 
 static void xgbe_config_mac_speed(struct xgbe_prv_data *pdata)
 {
-	switch (pdata->phy_speed) {
-	case SPEED_10000:
-		xgbe_set_xgmii_speed(pdata);
-		break;
-
-	case SPEED_2500:
-		xgbe_set_gmii_2500_speed(pdata);
-		break;
-
-	case SPEED_1000:
-		xgbe_set_gmii_speed(pdata);
-		break;
-	}
+	xgbe_set_speed(pdata, pdata->phy_speed);
 }
 
 static void xgbe_config_checksum_offload(struct xgbe_prv_data *pdata)
@@ -2905,9 +2887,7 @@ void xgbe_init_function_ptrs_dev(struct
 	hw_if->read_mmd_regs = xgbe_read_mmd_regs;
 	hw_if->write_mmd_regs = xgbe_write_mmd_regs;
 
-	hw_if->set_gmii_speed = xgbe_set_gmii_speed;
-	hw_if->set_gmii_2500_speed = xgbe_set_gmii_2500_speed;
-	hw_if->set_xgmii_speed = xgbe_set_xgmii_speed;
+	hw_if->set_speed = xgbe_set_speed;
 
 	hw_if->enable_tx = xgbe_enable_tx;
 	hw_if->disable_tx = xgbe_disable_tx;
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -783,7 +783,7 @@ static void xgbe_free_rx_data(struct xgb
 	DBGPR("<--xgbe_free_rx_data\n");
 }
 
-static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
 {
 	pdata->phy_link = -1;
 	pdata->phy_speed = SPEED_UNKNOWN;
@@ -1297,8 +1297,8 @@ static int xgbe_open(struct net_device *
 
 	DBGPR("-->xgbe_open\n");
 
-	/* Initialize the phy */
-	ret = xgbe_phy_init(pdata);
+	/* Reset the phy settings */
+	ret = xgbe_phy_reset(pdata);
 	if (ret)
 		return ret;
 
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -316,24 +316,7 @@ static int xgbe_set_settings(struct net_
 	}
 
 	if (cmd->autoneg == AUTONEG_DISABLE) {
-		switch (speed) {
-		case SPEED_10000:
-			break;
-		case SPEED_2500:
-			if (pdata->speed_set != XGBE_SPEEDSET_2500_10000) {
-				netdev_err(netdev, "unsupported speed %u\n",
-					   speed);
-				return -EINVAL;
-			}
-			break;
-		case SPEED_1000:
-			if (pdata->speed_set != XGBE_SPEEDSET_1000_10000) {
-				netdev_err(netdev, "unsupported speed %u\n",
-					   speed);
-				return -EINVAL;
-			}
-			break;
-		default:
+		if (!pdata->phy_if.phy_valid_speed(pdata, speed)) {
 			netdev_err(netdev, "unsupported speed %u\n", speed);
 			return -EINVAL;
 		}
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -125,6 +125,7 @@
 #include <linux/of_net.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/of_device.h>
 #include <linux/clk.h>
 #include <linux/property.h>
 #include <linux/acpi.h>
@@ -145,42 +146,6 @@ MODULE_PARM_DESC(debug, " Network interf
 static const u32 default_msg_level = (NETIF_MSG_LINK | NETIF_MSG_IFDOWN |
 				      NETIF_MSG_IFUP);
 
-static const u32 xgbe_serdes_blwc[] = {
-	XGBE_SPEED_1000_BLWC,
-	XGBE_SPEED_2500_BLWC,
-	XGBE_SPEED_10000_BLWC,
-};
-
-static const u32 xgbe_serdes_cdr_rate[] = {
-	XGBE_SPEED_1000_CDR,
-	XGBE_SPEED_2500_CDR,
-	XGBE_SPEED_10000_CDR,
-};
-
-static const u32 xgbe_serdes_pq_skew[] = {
-	XGBE_SPEED_1000_PQ,
-	XGBE_SPEED_2500_PQ,
-	XGBE_SPEED_10000_PQ,
-};
-
-static const u32 xgbe_serdes_tx_amp[] = {
-	XGBE_SPEED_1000_TXAMP,
-	XGBE_SPEED_2500_TXAMP,
-	XGBE_SPEED_10000_TXAMP,
-};
-
-static const u32 xgbe_serdes_dfe_tap_cfg[] = {
-	XGBE_SPEED_1000_DFE_TAP_CONFIG,
-	XGBE_SPEED_2500_DFE_TAP_CONFIG,
-	XGBE_SPEED_10000_DFE_TAP_CONFIG,
-};
-
-static const u32 xgbe_serdes_dfe_tap_ena[] = {
-	XGBE_SPEED_1000_DFE_TAP_ENABLE,
-	XGBE_SPEED_2500_DFE_TAP_ENABLE,
-	XGBE_SPEED_10000_DFE_TAP_ENABLE,
-};
-
 static void xgbe_default_config(struct xgbe_prv_data *pdata)
 {
 	DBGPR("-->xgbe_default_config\n");
@@ -207,9 +172,22 @@ static void xgbe_init_all_fptrs(struct x
 	xgbe_init_function_ptrs_dev(&pdata->hw_if);
 	xgbe_init_function_ptrs_phy(&pdata->phy_if);
 	xgbe_init_function_ptrs_desc(&pdata->desc_if);
+
+	pdata->vdata->init_function_ptrs_phy_impl(&pdata->phy_if);
 }
 
 #ifdef CONFIG_ACPI
+static const struct acpi_device_id xgbe_acpi_match[];
+
+static struct xgbe_version_data *xgbe_acpi_vdata(struct xgbe_prv_data *pdata)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(xgbe_acpi_match, pdata->dev);
+
+	return id ? (struct xgbe_version_data *)id->driver_data : NULL;
+}
+
 static int xgbe_acpi_support(struct xgbe_prv_data *pdata)
 {
 	struct device *dev = pdata->dev;
@@ -237,6 +215,11 @@ static int xgbe_acpi_support(struct xgbe
 	return 0;
 }
 #else   /* CONFIG_ACPI */
+static struct xgbe_version_data *xgbe_acpi_vdata(struct xgbe_prv_data *pdata)
+{
+	return NULL;
+}
+
 static int xgbe_acpi_support(struct xgbe_prv_data *pdata)
 {
 	return -EINVAL;
@@ -244,6 +227,17 @@ static int xgbe_acpi_support(struct xgbe
 #endif  /* CONFIG_ACPI */
 
 #ifdef CONFIG_OF
+static const struct of_device_id xgbe_of_match[];
+
+static struct xgbe_version_data *xgbe_of_vdata(struct xgbe_prv_data *pdata)
+{
+	const struct of_device_id *id;
+
+	id = of_match_device(xgbe_of_match, pdata->dev);
+
+	return id ? (struct xgbe_version_data *)id->data : NULL;
+}
+
 static int xgbe_of_support(struct xgbe_prv_data *pdata)
 {
 	struct device *dev = pdata->dev;
@@ -292,6 +286,11 @@ static struct platform_device *xgbe_of_g
 	return phy_pdev;
 }
 #else   /* CONFIG_OF */
+static struct xgbe_version_data *xgbe_of_vdata(struct xgbe_prv_data *pdata)
+{
+	return NULL;
+}
+
 static int xgbe_of_support(struct xgbe_prv_data *pdata)
 {
 	return -EINVAL;
@@ -333,11 +332,17 @@ static struct platform_device *xgbe_get_
 	return phy_pdev;
 }
 
+static struct xgbe_version_data *xgbe_get_vdata(struct xgbe_prv_data *pdata)
+{
+	return pdata->use_acpi ? xgbe_acpi_vdata(pdata)
+			       : xgbe_of_vdata(pdata);
+}
+
 static int xgbe_probe(struct platform_device *pdev)
 {
 	struct xgbe_prv_data *pdata;
 	struct net_device *netdev;
-	struct device *dev = &pdev->dev, *phy_dev;
+	struct device *dev = &pdev->dev;
 	struct platform_device *phy_pdev;
 	struct resource *res;
 	const char *phy_mode;
@@ -374,13 +379,17 @@ static int xgbe_probe(struct platform_de
 	/* Check if we should use ACPI or DT */
 	pdata->use_acpi = dev->of_node ? 0 : 1;
 
+	/* Get the version data */
+	pdata->vdata = xgbe_get_vdata(pdata);
+
 	phy_pdev = xgbe_get_phy_pdev(pdata);
 	if (!phy_pdev) {
 		dev_err(dev, "unable to obtain phy device\n");
 		ret = -EINVAL;
 		goto err_phydev;
 	}
-	phy_dev = &phy_pdev->dev;
+	pdata->phy_pdev = phy_pdev;
+	pdata->phy_dev = &phy_pdev->dev;
 
 	if (pdev == phy_pdev) {
 		/* New style device tree or ACPI:
@@ -492,115 +501,6 @@ static int xgbe_probe(struct platform_de
 	if (device_property_present(dev, XGBE_DMA_IRQS_PROPERTY))
 		pdata->per_channel_irq = 1;
 
-	/* Retrieve the PHY speedset */
-	ret = device_property_read_u32(phy_dev, XGBE_SPEEDSET_PROPERTY,
-				       &pdata->speed_set);
-	if (ret) {
-		dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
-		goto err_io;
-	}
-
-	switch (pdata->speed_set) {
-	case XGBE_SPEEDSET_1000_10000:
-	case XGBE_SPEEDSET_2500_10000:
-		break;
-	default:
-		dev_err(dev, "invalid %s property\n", XGBE_SPEEDSET_PROPERTY);
-		ret = -EINVAL;
-		goto err_io;
-	}
-
-	/* Retrieve the PHY configuration properties */
-	if (device_property_present(phy_dev, XGBE_BLWC_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_BLWC_PROPERTY,
-						     pdata->serdes_blwc,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_BLWC_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_blwc, xgbe_serdes_blwc,
-		       sizeof(pdata->serdes_blwc));
-	}
-
-	if (device_property_present(phy_dev, XGBE_CDR_RATE_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_CDR_RATE_PROPERTY,
-						     pdata->serdes_cdr_rate,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_CDR_RATE_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_cdr_rate, xgbe_serdes_cdr_rate,
-		       sizeof(pdata->serdes_cdr_rate));
-	}
-
-	if (device_property_present(phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_PQ_SKEW_PROPERTY,
-						     pdata->serdes_pq_skew,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_PQ_SKEW_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_pq_skew, xgbe_serdes_pq_skew,
-		       sizeof(pdata->serdes_pq_skew));
-	}
-
-	if (device_property_present(phy_dev, XGBE_TX_AMP_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_TX_AMP_PROPERTY,
-						     pdata->serdes_tx_amp,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_TX_AMP_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_tx_amp, xgbe_serdes_tx_amp,
-		       sizeof(pdata->serdes_tx_amp));
-	}
-
-	if (device_property_present(phy_dev, XGBE_DFE_CFG_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_DFE_CFG_PROPERTY,
-						     pdata->serdes_dfe_tap_cfg,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_DFE_CFG_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_dfe_tap_cfg, xgbe_serdes_dfe_tap_cfg,
-		       sizeof(pdata->serdes_dfe_tap_cfg));
-	}
-
-	if (device_property_present(phy_dev, XGBE_DFE_ENA_PROPERTY)) {
-		ret = device_property_read_u32_array(phy_dev,
-						     XGBE_DFE_ENA_PROPERTY,
-						     pdata->serdes_dfe_tap_ena,
-						     XGBE_SPEEDS);
-		if (ret) {
-			dev_err(dev, "invalid %s property\n",
-				XGBE_DFE_ENA_PROPERTY);
-			goto err_io;
-		}
-	} else {
-		memcpy(pdata->serdes_dfe_tap_ena, xgbe_serdes_dfe_tap_ena,
-		       sizeof(pdata->serdes_dfe_tap_ena));
-	}
-
 	/* Obtain device settings unique to ACPI/OF */
 	if (pdata->use_acpi)
 		ret = xgbe_acpi_support(pdata);
@@ -704,7 +604,9 @@ static int xgbe_probe(struct platform_de
 	XGMAC_SET_BITS(pdata->rss_options, MAC_RSSCR, UDP4TE, 1);
 
 	/* Call MDIO/PHY initialization routine */
-	pdata->phy_if.phy_init(pdata);
+	ret = pdata->phy_if.phy_init(pdata);
+	if (ret)
+		goto err_io;
 
 	/* Set device operations */
 	netdev->netdev_ops = xgbe_get_netdev_ops();
@@ -777,8 +679,6 @@ static int xgbe_probe(struct platform_de
 
 	xgbe_debugfs_init(pdata);
 
-	platform_device_put(phy_pdev);
-
 	netdev_notice(netdev, "net device enabled\n");
 
 	DBGPR("<-- xgbe_probe\n");
@@ -814,6 +714,8 @@ static int xgbe_remove(struct platform_d
 
 	xgbe_ptp_unregister(pdata);
 
+	pdata->phy_if.phy_exit(pdata);
+
 	flush_workqueue(pdata->an_workqueue);
 	destroy_workqueue(pdata->an_workqueue);
 
@@ -822,6 +724,8 @@ static int xgbe_remove(struct platform_d
 
 	unregister_netdev(netdev);
 
+	platform_device_put(pdata->phy_pdev);
+
 	free_netdev(netdev);
 
 	DBGPR("<--xgbe_remove\n");
@@ -876,9 +780,14 @@ static int xgbe_resume(struct device *de
 }
 #endif /* CONFIG_PM_SLEEP */
 
+static const struct xgbe_version_data xgbe_v1 = {
+	.init_function_ptrs_phy_impl	= xgbe_init_function_ptrs_phy_v1,
+};
+
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id xgbe_acpi_match[] = {
-	{ "AMDI8001", 0 },
+	{ .id = "AMDI8001",
+	  .driver_data = (kernel_ulong_t)&xgbe_v1 },
 	{},
 };
 
@@ -887,7 +796,8 @@ MODULE_DEVICE_TABLE(acpi, xgbe_acpi_matc
 
 #ifdef CONFIG_OF
 static const struct of_device_id xgbe_of_match[] = {
-	{ .compatible = "amd,xgbe-seattle-v1a", },
+	{ .compatible = "amd,xgbe-seattle-v1a",
+	  .data = &xgbe_v1 },
 	{},
 };
 
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -145,280 +145,91 @@ static void xgbe_an_disable_kr_training(
 	XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, reg);
 }
 
-static void xgbe_pcs_power_cycle(struct xgbe_prv_data *pdata)
+static void xgbe_kr_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-
-	reg |= MDIO_CTRL1_LPOWER;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	usleep_range(75, 100);
-
-	reg &= ~MDIO_CTRL1_LPOWER;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-}
-
-static void xgbe_serdes_start_ratechange(struct xgbe_prv_data *pdata)
-{
-	/* Assert Rx and Tx ratechange */
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
-}
-
-static void xgbe_serdes_complete_ratechange(struct xgbe_prv_data *pdata)
-{
-	unsigned int wait;
-	u16 status;
-
-	/* Release Rx and Tx ratechange */
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
-
-	/* Wait for Rx and Tx ready */
-	wait = XGBE_RATECHANGE_COUNT;
-	while (wait--) {
-		usleep_range(50, 75);
-
-		status = XSIR0_IOREAD(pdata, SIR0_STATUS);
-		if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
-		    XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
-			goto rx_reset;
-	}
-
-	netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
-		  status);
-
-rx_reset:
-	/* Perform Rx reset for the DFE changes */
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
-}
-
-static void xgbe_xgmii_mode(struct xgbe_prv_data *pdata)
-{
-	unsigned int reg;
-
 	/* Enable KR training */
 	xgbe_an_enable_kr_training(pdata);
 
 	/* Set MAC to 10G speed */
-	pdata->hw_if.set_xgmii_speed(pdata);
-
-	/* Set PCS to KR/10G speed */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	reg &= ~MDIO_PCS_CTRL2_TYPE;
-	reg |= MDIO_PCS_CTRL2_10GBR;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg &= ~MDIO_CTRL1_SPEEDSEL;
-	reg |= MDIO_CTRL1_SPEED10G;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	xgbe_pcs_power_cycle(pdata);
-
-	/* Set SerDes to 10G speed */
-	xgbe_serdes_start_ratechange(pdata);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
-			   pdata->serdes_cdr_rate[XGBE_SPEED_10000]);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
-			   pdata->serdes_tx_amp[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
-			   pdata->serdes_blwc[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
-			   pdata->serdes_pq_skew[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
-			   pdata->serdes_dfe_tap_cfg[XGBE_SPEED_10000]);
-	XRXTX_IOWRITE(pdata, RXTX_REG22,
-		      pdata->serdes_dfe_tap_ena[XGBE_SPEED_10000]);
-
-	xgbe_serdes_complete_ratechange(pdata);
+	pdata->hw_if.set_speed(pdata, SPEED_10000);
 
-	netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+	/* Call PHY implementation support to complete rate change */
+	pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KR);
 }
 
-static void xgbe_gmii_2500_mode(struct xgbe_prv_data *pdata)
+static void xgbe_kx_2500_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
 	/* Disable KR training */
 	xgbe_an_disable_kr_training(pdata);
 
 	/* Set MAC to 2.5G speed */
-	pdata->hw_if.set_gmii_2500_speed(pdata);
-
-	/* Set PCS to KX/1G speed */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	reg &= ~MDIO_PCS_CTRL2_TYPE;
-	reg |= MDIO_PCS_CTRL2_10GBX;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg &= ~MDIO_CTRL1_SPEEDSEL;
-	reg |= MDIO_CTRL1_SPEED1G;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	xgbe_pcs_power_cycle(pdata);
-
-	/* Set SerDes to 2.5G speed */
-	xgbe_serdes_start_ratechange(pdata);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
-			   pdata->serdes_cdr_rate[XGBE_SPEED_2500]);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
-			   pdata->serdes_tx_amp[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
-			   pdata->serdes_blwc[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
-			   pdata->serdes_pq_skew[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
-			   pdata->serdes_dfe_tap_cfg[XGBE_SPEED_2500]);
-	XRXTX_IOWRITE(pdata, RXTX_REG22,
-		      pdata->serdes_dfe_tap_ena[XGBE_SPEED_2500]);
-
-	xgbe_serdes_complete_ratechange(pdata);
+	pdata->hw_if.set_speed(pdata, SPEED_2500);
 
-	netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+	/* Call PHY implementation support to complete rate change */
+	pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KX_2500);
 }
 
-static void xgbe_gmii_mode(struct xgbe_prv_data *pdata)
+static void xgbe_kx_1000_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
 	/* Disable KR training */
 	xgbe_an_disable_kr_training(pdata);
 
 	/* Set MAC to 1G speed */
-	pdata->hw_if.set_gmii_speed(pdata);
-
-	/* Set PCS to KX/1G speed */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	reg &= ~MDIO_PCS_CTRL2_TYPE;
-	reg |= MDIO_PCS_CTRL2_10GBX;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg &= ~MDIO_CTRL1_SPEEDSEL;
-	reg |= MDIO_CTRL1_SPEED1G;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	xgbe_pcs_power_cycle(pdata);
-
-	/* Set SerDes to 1G speed */
-	xgbe_serdes_start_ratechange(pdata);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
-
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
-			   pdata->serdes_cdr_rate[XGBE_SPEED_1000]);
-	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
-			   pdata->serdes_tx_amp[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
-			   pdata->serdes_blwc[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
-			   pdata->serdes_pq_skew[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
-			   pdata->serdes_dfe_tap_cfg[XGBE_SPEED_1000]);
-	XRXTX_IOWRITE(pdata, RXTX_REG22,
-		      pdata->serdes_dfe_tap_ena[XGBE_SPEED_1000]);
+	pdata->hw_if.set_speed(pdata, SPEED_1000);
 
-	xgbe_serdes_complete_ratechange(pdata);
-
-	netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+	/* Call PHY implementation support to complete rate change */
+	pdata->phy_if.phy_impl.set_mode(pdata, XGBE_MODE_KX_1000);
 }
 
-static void xgbe_cur_mode(struct xgbe_prv_data *pdata,
-			  enum xgbe_mode *mode)
+static enum xgbe_mode xgbe_cur_mode(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg;
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
-	if ((reg & MDIO_PCS_CTRL2_TYPE) == MDIO_PCS_CTRL2_10GBR)
-		*mode = XGBE_MODE_KR;
-	else
-		*mode = XGBE_MODE_KX;
+	return pdata->phy_if.phy_impl.cur_mode(pdata);
 }
 
 static bool xgbe_in_kr_mode(struct xgbe_prv_data *pdata)
 {
-	enum xgbe_mode mode;
-
-	xgbe_cur_mode(pdata, &mode);
-
-	return (mode == XGBE_MODE_KR);
+	return (xgbe_cur_mode(pdata) == XGBE_MODE_KR);
 }
 
-static void xgbe_switch_mode(struct xgbe_prv_data *pdata)
+static void xgbe_change_mode(struct xgbe_prv_data *pdata,
+			     enum xgbe_mode mode)
 {
-	/* If we are in KR switch to KX, and vice-versa */
-	if (xgbe_in_kr_mode(pdata)) {
-		if (pdata->speed_set == XGBE_SPEEDSET_1000_10000)
-			xgbe_gmii_mode(pdata);
-		else
-			xgbe_gmii_2500_mode(pdata);
-	} else {
-		xgbe_xgmii_mode(pdata);
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		xgbe_kx_1000_mode(pdata);
+		break;
+	case XGBE_MODE_KX_2500:
+		xgbe_kx_2500_mode(pdata);
+		break;
+	case XGBE_MODE_KR:
+		xgbe_kr_mode(pdata);
+		break;
+	case XGBE_MODE_UNKNOWN:
+		break;
+	default:
+		netif_dbg(pdata, link, pdata->netdev,
+			  "invalid operation mode requested (%u)\n", mode);
 	}
 }
 
-static void xgbe_set_mode(struct xgbe_prv_data *pdata,
-			  enum xgbe_mode mode)
-{
-	enum xgbe_mode cur_mode;
-
-	xgbe_cur_mode(pdata, &cur_mode);
-	if (mode != cur_mode)
-		xgbe_switch_mode(pdata);
-}
-
-static bool xgbe_use_xgmii_mode(struct xgbe_prv_data *pdata)
+static void xgbe_switch_mode(struct xgbe_prv_data *pdata)
 {
-	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
-		if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full)
-			return true;
-	} else {
-		if (pdata->phy.speed == SPEED_10000)
-			return true;
-	}
-
-	return false;
+	xgbe_change_mode(pdata, pdata->phy_if.phy_impl.switch_mode(pdata));
 }
 
-static bool xgbe_use_gmii_2500_mode(struct xgbe_prv_data *pdata)
+static void xgbe_set_mode(struct xgbe_prv_data *pdata,
+			  enum xgbe_mode mode)
 {
-	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
-		if (pdata->phy.advertising & ADVERTISED_2500baseX_Full)
-			return true;
-	} else {
-		if (pdata->phy.speed == SPEED_2500)
-			return true;
-	}
+	if (mode == xgbe_cur_mode(pdata))
+		return;
 
-	return false;
+	xgbe_change_mode(pdata, mode);
 }
 
-static bool xgbe_use_gmii_mode(struct xgbe_prv_data *pdata)
+static bool xgbe_use_mode(struct xgbe_prv_data *pdata,
+			  enum xgbe_mode mode)
 {
-	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
-		if (pdata->phy.advertising & ADVERTISED_1000baseKX_Full)
-			return true;
-	} else {
-		if (pdata->phy.speed == SPEED_1000)
-			return true;
-	}
-
-	return false;
+	return pdata->phy_if.phy_impl.use_mode(pdata, mode);
 }
 
 static void xgbe_set_an(struct xgbe_prv_data *pdata, bool enable, bool restart)
@@ -476,13 +287,15 @@ static enum xgbe_an xgbe_an_tx_training(
 	/* Start KR training */
 	reg = XMDIO_READ(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL);
 	if (reg & XGBE_KR_TRAINING_ENABLE) {
-		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+		if (pdata->phy_if.phy_impl.kr_training_pre)
+			pdata->phy_if.phy_impl.kr_training_pre(pdata);
 
 		reg |= XGBE_KR_TRAINING_START;
 		XMDIO_WRITE(pdata, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL,
 			    reg);
 
-		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+		if (pdata->phy_if.phy_impl.kr_training_post)
+			pdata->phy_if.phy_impl.kr_training_post(pdata);
 
 		netif_dbg(pdata, link, pdata->netdev,
 			  "KR training initiated\n");
@@ -571,7 +384,7 @@ static enum xgbe_an xgbe_an_page_receive
 	}
 
 	state = xgbe_in_kr_mode(pdata) ? &pdata->kr_state
-					   : &pdata->kx_state;
+				       : &pdata->kx_state;
 
 	switch (*state) {
 	case XGBE_RX_BPA:
@@ -907,24 +720,28 @@ static void xgbe_phy_adjust_link(struct
 		xgbe_phy_print_status(pdata);
 }
 
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+	return pdata->phy_if.phy_impl.valid_speed(pdata, speed);
+}
+
 static int xgbe_phy_config_fixed(struct xgbe_prv_data *pdata)
 {
+	enum xgbe_mode mode;
+
 	netif_dbg(pdata, link, pdata->netdev, "fixed PHY configuration\n");
 
 	/* Disable auto-negotiation */
 	xgbe_disable_an(pdata);
 
-	/* Validate/Set specified speed */
-	switch (pdata->phy.speed) {
-	case SPEED_10000:
-		xgbe_set_mode(pdata, XGBE_MODE_KR);
-		break;
-
-	case SPEED_2500:
-	case SPEED_1000:
-		xgbe_set_mode(pdata, XGBE_MODE_KX);
+	/* Set specified mode for specified speed */
+	mode = pdata->phy_if.phy_impl.get_mode(pdata, pdata->phy.speed);
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+	case XGBE_MODE_KX_2500:
+	case XGBE_MODE_KR:
 		break;
-
+	case XGBE_MODE_UNKNOWN:
 	default:
 		return -EINVAL;
 	}
@@ -933,6 +750,8 @@ static int xgbe_phy_config_fixed(struct
 	if (pdata->phy.duplex != DUPLEX_FULL)
 		return -EINVAL;
 
+	xgbe_set_mode(pdata, mode);
+
 	return 0;
 }
 
@@ -950,11 +769,12 @@ static int __xgbe_phy_config_aneg(struct
 	disable_irq(pdata->an_irq);
 
 	/* Start auto-negotiation in a supported mode */
-	if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full) {
+	if (xgbe_use_mode(pdata, XGBE_MODE_KR)) {
 		xgbe_set_mode(pdata, XGBE_MODE_KR);
-	} else if ((pdata->phy.advertising & ADVERTISED_1000baseKX_Full) ||
-		   (pdata->phy.advertising & ADVERTISED_2500baseX_Full)) {
-		xgbe_set_mode(pdata, XGBE_MODE_KX);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_2500)) {
+		xgbe_set_mode(pdata, XGBE_MODE_KX_2500);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_1000)) {
+		xgbe_set_mode(pdata, XGBE_MODE_KX_1000);
 	} else {
 		enable_irq(pdata->an_irq);
 		return -EINVAL;
@@ -1016,108 +836,45 @@ static void xgbe_check_link_timeout(stru
 	}
 }
 
-static void xgbe_phy_status_force(struct xgbe_prv_data *pdata)
+static enum xgbe_mode xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
 {
-	if (xgbe_in_kr_mode(pdata)) {
-		pdata->phy.speed = SPEED_10000;
-	} else {
-		switch (pdata->speed_set) {
-		case XGBE_SPEEDSET_1000_10000:
-			pdata->phy.speed = SPEED_1000;
-			break;
-
-		case XGBE_SPEEDSET_2500_10000:
-			pdata->phy.speed = SPEED_2500;
-			break;
-		}
-	}
-	pdata->phy.duplex = DUPLEX_FULL;
+	return pdata->phy_if.phy_impl.an_outcome(pdata);
 }
 
-static void xgbe_phy_status_aneg(struct xgbe_prv_data *pdata)
+static void xgbe_phy_status_result(struct xgbe_prv_data *pdata)
 {
-	unsigned int ad_reg, lp_reg;
+	enum xgbe_mode mode;
 
 	pdata->phy.lp_advertising = 0;
 
 	if ((pdata->phy.autoneg != AUTONEG_ENABLE) || pdata->parallel_detect)
-		return xgbe_phy_status_force(pdata);
-
-	pdata->phy.lp_advertising |= ADVERTISED_Autoneg;
-	pdata->phy.lp_advertising |= ADVERTISED_Backplane;
-
-	/* Compare Advertisement and Link Partner register 1 */
-	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
-	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
-	if (lp_reg & 0x400)
-		pdata->phy.lp_advertising |= ADVERTISED_Pause;
-	if (lp_reg & 0x800)
-		pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
-
-	if (pdata->phy.pause_autoneg) {
-		/* Set flow control based on auto-negotiation result */
-		pdata->phy.tx_pause = 0;
-		pdata->phy.rx_pause = 0;
-
-		if (ad_reg & lp_reg & 0x400) {
-			pdata->phy.tx_pause = 1;
-			pdata->phy.rx_pause = 1;
-		} else if (ad_reg & lp_reg & 0x800) {
-			if (ad_reg & 0x400)
-				pdata->phy.rx_pause = 1;
-			else if (lp_reg & 0x400)
-				pdata->phy.tx_pause = 1;
-		}
-	}
-
-	/* Compare Advertisement and Link Partner register 2 */
-	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
-	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
-	if (lp_reg & 0x80)
-		pdata->phy.lp_advertising |= ADVERTISED_10000baseKR_Full;
-	if (lp_reg & 0x20) {
-		switch (pdata->speed_set) {
-		case XGBE_SPEEDSET_1000_10000:
-			pdata->phy.lp_advertising |= ADVERTISED_1000baseKX_Full;
-			break;
-		case XGBE_SPEEDSET_2500_10000:
-			pdata->phy.lp_advertising |= ADVERTISED_2500baseX_Full;
-			break;
-		}
-	}
+		mode = xgbe_cur_mode(pdata);
+	else
+		mode = xgbe_phy_status_aneg(pdata);
 
-	ad_reg &= lp_reg;
-	if (ad_reg & 0x80) {
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		pdata->phy.speed = SPEED_1000;
+		break;
+	case XGBE_MODE_KX_2500:
+		pdata->phy.speed = SPEED_2500;
+		break;
+	case XGBE_MODE_KR:
 		pdata->phy.speed = SPEED_10000;
-		xgbe_set_mode(pdata, XGBE_MODE_KR);
-	} else if (ad_reg & 0x20) {
-		switch (pdata->speed_set) {
-		case XGBE_SPEEDSET_1000_10000:
-			pdata->phy.speed = SPEED_1000;
-			break;
-
-		case XGBE_SPEEDSET_2500_10000:
-			pdata->phy.speed = SPEED_2500;
-			break;
-		}
-
-		xgbe_set_mode(pdata, XGBE_MODE_KX);
-	} else {
+		break;
+	case XGBE_MODE_UNKNOWN:
+	default:
 		pdata->phy.speed = SPEED_UNKNOWN;
 	}
 
-	/* Compare Advertisement and Link Partner register 3 */
-	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
-	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
-	if (lp_reg & 0xc000)
-		pdata->phy.lp_advertising |= ADVERTISED_10000baseR_FEC;
-
 	pdata->phy.duplex = DUPLEX_FULL;
+
+	xgbe_set_mode(pdata, mode);
 }
 
 static void xgbe_phy_status(struct xgbe_prv_data *pdata)
 {
-	unsigned int reg, link_aneg;
+	unsigned int link_aneg;
 
 	if (test_bit(XGBE_LINK_ERR, &pdata->dev_state)) {
 		netif_carrier_off(pdata->netdev);
@@ -1128,20 +885,14 @@ static void xgbe_phy_status(struct xgbe_
 
 	link_aneg = (pdata->phy.autoneg == AUTONEG_ENABLE);
 
-	/* Get the link status. Link status is latched low, so read
-	 * once to clear and then read again to get current state
-	 */
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
-	pdata->phy.link = (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
-
+	pdata->phy.link = pdata->phy_if.phy_impl.link_status(pdata);
 	if (pdata->phy.link) {
 		if (link_aneg && !xgbe_phy_aneg_done(pdata)) {
 			xgbe_check_link_timeout(pdata);
 			return;
 		}
 
-		xgbe_phy_status_aneg(pdata);
+		xgbe_phy_status_result(pdata);
 
 		if (test_bit(XGBE_LINK_INIT, &pdata->dev_state))
 			clear_bit(XGBE_LINK_INIT, &pdata->dev_state);
@@ -1155,7 +906,7 @@ static void xgbe_phy_status(struct xgbe_
 				return;
 		}
 
-		xgbe_phy_status_aneg(pdata);
+		xgbe_phy_status_result(pdata);
 
 		netif_carrier_off(pdata->netdev);
 	}
@@ -1168,6 +919,12 @@ static void xgbe_phy_stop(struct xgbe_pr
 {
 	netif_dbg(pdata, link, pdata->netdev, "stopping PHY\n");
 
+	if (!pdata->phy_started)
+		return;
+
+	/* Indicate the PHY is down */
+	pdata->phy_started = 0;
+
 	/* Disable auto-negotiation */
 	xgbe_disable_an(pdata);
 
@@ -1176,6 +933,8 @@ static void xgbe_phy_stop(struct xgbe_pr
 
 	devm_free_irq(pdata->dev, pdata->an_irq, pdata);
 
+	pdata->phy_if.phy_impl.stop(pdata);
+
 	pdata->phy.link = 0;
 	netif_carrier_off(pdata->netdev);
 
@@ -1189,28 +948,35 @@ static int xgbe_phy_start(struct xgbe_pr
 
 	netif_dbg(pdata, link, pdata->netdev, "starting PHY\n");
 
+	ret = pdata->phy_if.phy_impl.start(pdata);
+	if (ret)
+		return ret;
+
 	ret = devm_request_irq(pdata->dev, pdata->an_irq,
 			       xgbe_an_isr, 0, pdata->an_name,
 			       pdata);
 	if (ret) {
 		netdev_err(netdev, "phy irq request failed\n");
-		return ret;
+		goto err_stop;
 	}
 
 	/* Set initial mode - call the mode setting routines
 	 * directly to insure we are properly configured
 	 */
-	if (xgbe_use_xgmii_mode(pdata)) {
-		xgbe_xgmii_mode(pdata);
-	} else if (xgbe_use_gmii_mode(pdata)) {
-		xgbe_gmii_mode(pdata);
-	} else if (xgbe_use_gmii_2500_mode(pdata)) {
-		xgbe_gmii_2500_mode(pdata);
+	if (xgbe_use_mode(pdata, XGBE_MODE_KR)) {
+		xgbe_kr_mode(pdata);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_2500)) {
+		xgbe_kx_2500_mode(pdata);
+	} else if (xgbe_use_mode(pdata, XGBE_MODE_KX_1000)) {
+		xgbe_kx_1000_mode(pdata);
 	} else {
 		ret = -EINVAL;
 		goto err_irq;
 	}
 
+	/* Indicate the PHY is up and running */
+	pdata->phy_started = 1;
+
 	/* Set up advertisement registers based on current settings */
 	xgbe_an_init(pdata);
 
@@ -1222,25 +988,19 @@ static int xgbe_phy_start(struct xgbe_pr
 err_irq:
 	devm_free_irq(pdata->dev, pdata->an_irq, pdata);
 
+err_stop:
+	pdata->phy_if.phy_impl.stop(pdata);
+
 	return ret;
 }
 
 static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
 {
-	unsigned int count, reg;
-
-	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	reg |= MDIO_CTRL1_RESET;
-	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
-
-	count = 50;
-	do {
-		msleep(20);
-		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
-	} while ((reg & MDIO_CTRL1_RESET) && --count);
+	int ret;
 
-	if (reg & MDIO_CTRL1_RESET)
-		return -ETIMEDOUT;
+	ret = pdata->phy_if.phy_impl.reset(pdata);
+	if (ret)
+		return ret;
 
 	/* Disable auto-negotiation for now */
 	xgbe_disable_an(pdata);
@@ -1290,41 +1050,57 @@ static void xgbe_dump_phy_registers(stru
 	dev_dbg(dev, "\n*************************************************\n");
 }
 
-static void xgbe_phy_init(struct xgbe_prv_data *pdata)
+static int xgbe_phy_best_advertised_speed(struct xgbe_prv_data *pdata)
+{
+	if (pdata->phy.advertising & ADVERTISED_10000baseKR_Full)
+		return SPEED_10000;
+	else if (pdata->phy.advertising & ADVERTISED_2500baseX_Full)
+		return SPEED_2500;
+	else if (pdata->phy.advertising & ADVERTISED_1000baseKX_Full)
+		return SPEED_1000;
+
+	return SPEED_UNKNOWN;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
 {
+	xgbe_phy_stop(pdata);
+
+	pdata->phy_if.phy_impl.exit(pdata);
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+	int ret;
+
 	mutex_init(&pdata->an_mutex);
 	INIT_WORK(&pdata->an_irq_work, xgbe_an_irq_work);
 	INIT_WORK(&pdata->an_work, xgbe_an_state_machine);
 	pdata->mdio_mmd = MDIO_MMD_PCS;
 
-	/* Initialize supported features */
-	pdata->phy.supported = SUPPORTED_Autoneg;
-	pdata->phy.supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-	pdata->phy.supported |= SUPPORTED_Backplane;
-	pdata->phy.supported |= SUPPORTED_10000baseKR_Full;
-	switch (pdata->speed_set) {
-	case XGBE_SPEEDSET_1000_10000:
-		pdata->phy.supported |= SUPPORTED_1000baseKX_Full;
-		break;
-	case XGBE_SPEEDSET_2500_10000:
-		pdata->phy.supported |= SUPPORTED_2500baseX_Full;
-		break;
-	}
-
+	/* Check for FEC support */
 	pdata->fec_ability = XMDIO_READ(pdata, MDIO_MMD_PMAPMD,
 					MDIO_PMA_10GBR_FECABLE);
 	pdata->fec_ability &= (MDIO_PMA_10GBR_FECABLE_ABLE |
 			       MDIO_PMA_10GBR_FECABLE_ERRABLE);
-	if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
-		pdata->phy.supported |= SUPPORTED_10000baseR_FEC;
 
+	/* Setup the phy (including supported features) */
+	ret = pdata->phy_if.phy_impl.init(pdata);
+	if (ret)
+		return ret;
 	pdata->phy.advertising = pdata->phy.supported;
 
 	pdata->phy.address = 0;
 
-	pdata->phy.autoneg = AUTONEG_ENABLE;
-	pdata->phy.speed = SPEED_UNKNOWN;
-	pdata->phy.duplex = DUPLEX_UNKNOWN;
+	if (pdata->phy.advertising & ADVERTISED_Autoneg) {
+		pdata->phy.autoneg = AUTONEG_ENABLE;
+		pdata->phy.speed = SPEED_UNKNOWN;
+		pdata->phy.duplex = DUPLEX_UNKNOWN;
+	} else {
+		pdata->phy.autoneg = AUTONEG_DISABLE;
+		pdata->phy.speed = xgbe_phy_best_advertised_speed(pdata);
+		pdata->phy.duplex = DUPLEX_FULL;
+	}
 
 	pdata->phy.link = 0;
 
@@ -1346,11 +1122,14 @@ static void xgbe_phy_init(struct xgbe_pr
 
 	if (netif_msg_drv(pdata))
 		xgbe_dump_phy_registers(pdata);
+
+	return 0;
 }
 
 void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *phy_if)
 {
 	phy_if->phy_init        = xgbe_phy_init;
+	phy_if->phy_exit        = xgbe_phy_exit;
 
 	phy_if->phy_reset       = xgbe_phy_reset;
 	phy_if->phy_start       = xgbe_phy_start;
@@ -1358,4 +1137,6 @@ void xgbe_init_function_ptrs_phy(struct
 
 	phy_if->phy_status      = xgbe_phy_status;
 	phy_if->phy_config_aneg = xgbe_phy_config_aneg;
+
+	phy_if->phy_valid_speed = xgbe_phy_valid_speed;
 }
--- /dev/null
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v1.c
@@ -0,0 +1,821 @@
+/*
+ * AMD 10Gb Ethernet driver
+ *
+ * This file is available to you under your choice of the following two
+ * licenses:
+ *
+ * License 1: GPLv2
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ *
+ * This file is free software; you may copy, redistribute and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ * License 2: Modified BSD
+ *
+ * Copyright (c) 2016 Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file incorporates work covered by the following copyright and
+ * permission notice:
+ *     The Synopsys DWC ETHER XGMAC Software Driver and documentation
+ *     (hereinafter "Software") is an unsupported proprietary work of Synopsys,
+ *     Inc. unless otherwise expressly agreed to in writing between Synopsys
+ *     and you.
+ *
+ *     The Software IS NOT an item of Licensed Software or Licensed Product
+ *     under any End User Software License Agreement or Agreement for Licensed
+ *     Product with Synopsys or any supplement thereto.  Permission is hereby
+ *     granted, free of charge, to any person obtaining a copy of this software
+ *     annotated with this license and the Software, to deal in the Software
+ *     without restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or sell copies
+ *     of the Software, and to permit persons to whom the Software is furnished
+ *     to do so, subject to the following conditions:
+ *
+ *     The above copyright notice and this permission notice shall be included
+ *     in all copies or substantial portions of the Software.
+ *
+ *     THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
+ *     BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *     TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ *     PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS
+ *     BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *     CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *     SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ *     INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ *     ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ *     THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/device.h>
+#include <linux/property.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+
+#include "xgbe.h"
+#include "xgbe-common.h"
+
+#define XGBE_BLWC_PROPERTY		"amd,serdes-blwc"
+#define XGBE_CDR_RATE_PROPERTY		"amd,serdes-cdr-rate"
+#define XGBE_PQ_SKEW_PROPERTY		"amd,serdes-pq-skew"
+#define XGBE_TX_AMP_PROPERTY		"amd,serdes-tx-amp"
+#define XGBE_DFE_CFG_PROPERTY		"amd,serdes-dfe-tap-config"
+#define XGBE_DFE_ENA_PROPERTY		"amd,serdes-dfe-tap-enable"
+
+/* Default SerDes settings */
+#define XGBE_SPEED_1000_BLWC		1
+#define XGBE_SPEED_1000_CDR		0x2
+#define XGBE_SPEED_1000_PLL		0x0
+#define XGBE_SPEED_1000_PQ		0xa
+#define XGBE_SPEED_1000_RATE		0x3
+#define XGBE_SPEED_1000_TXAMP		0xf
+#define XGBE_SPEED_1000_WORD		0x1
+#define XGBE_SPEED_1000_DFE_TAP_CONFIG	0x3
+#define XGBE_SPEED_1000_DFE_TAP_ENABLE	0x0
+
+#define XGBE_SPEED_2500_BLWC		1
+#define XGBE_SPEED_2500_CDR		0x2
+#define XGBE_SPEED_2500_PLL		0x0
+#define XGBE_SPEED_2500_PQ		0xa
+#define XGBE_SPEED_2500_RATE		0x1
+#define XGBE_SPEED_2500_TXAMP		0xf
+#define XGBE_SPEED_2500_WORD		0x1
+#define XGBE_SPEED_2500_DFE_TAP_CONFIG	0x3
+#define XGBE_SPEED_2500_DFE_TAP_ENABLE	0x0
+
+#define XGBE_SPEED_10000_BLWC		0
+#define XGBE_SPEED_10000_CDR		0x7
+#define XGBE_SPEED_10000_PLL		0x1
+#define XGBE_SPEED_10000_PQ		0x12
+#define XGBE_SPEED_10000_RATE		0x0
+#define XGBE_SPEED_10000_TXAMP		0xa
+#define XGBE_SPEED_10000_WORD		0x7
+#define XGBE_SPEED_10000_DFE_TAP_CONFIG	0x1
+#define XGBE_SPEED_10000_DFE_TAP_ENABLE	0x7f
+
+/* Rate-change complete wait/retry count */
+#define XGBE_RATECHANGE_COUNT		500
+
+static const u32 xgbe_phy_blwc[] = {
+	XGBE_SPEED_1000_BLWC,
+	XGBE_SPEED_2500_BLWC,
+	XGBE_SPEED_10000_BLWC,
+};
+
+static const u32 xgbe_phy_cdr_rate[] = {
+	XGBE_SPEED_1000_CDR,
+	XGBE_SPEED_2500_CDR,
+	XGBE_SPEED_10000_CDR,
+};
+
+static const u32 xgbe_phy_pq_skew[] = {
+	XGBE_SPEED_1000_PQ,
+	XGBE_SPEED_2500_PQ,
+	XGBE_SPEED_10000_PQ,
+};
+
+static const u32 xgbe_phy_tx_amp[] = {
+	XGBE_SPEED_1000_TXAMP,
+	XGBE_SPEED_2500_TXAMP,
+	XGBE_SPEED_10000_TXAMP,
+};
+
+static const u32 xgbe_phy_dfe_tap_cfg[] = {
+	XGBE_SPEED_1000_DFE_TAP_CONFIG,
+	XGBE_SPEED_2500_DFE_TAP_CONFIG,
+	XGBE_SPEED_10000_DFE_TAP_CONFIG,
+};
+
+static const u32 xgbe_phy_dfe_tap_ena[] = {
+	XGBE_SPEED_1000_DFE_TAP_ENABLE,
+	XGBE_SPEED_2500_DFE_TAP_ENABLE,
+	XGBE_SPEED_10000_DFE_TAP_ENABLE,
+};
+
+struct xgbe_phy_data {
+	/* 1000/10000 vs 2500/10000 indicator */
+	unsigned int speed_set;
+
+	/* SerDes UEFI configurable settings.
+	 *   Switching between modes/speeds requires new values for some
+	 *   SerDes settings.  The values can be supplied as device
+	 *   properties in array format.  The first array entry is for
+	 *   1GbE, second for 2.5GbE and third for 10GbE
+	 */
+	u32 blwc[XGBE_SPEEDS];
+	u32 cdr_rate[XGBE_SPEEDS];
+	u32 pq_skew[XGBE_SPEEDS];
+	u32 tx_amp[XGBE_SPEEDS];
+	u32 dfe_tap_cfg[XGBE_SPEEDS];
+	u32 dfe_tap_ena[XGBE_SPEEDS];
+};
+
+static void xgbe_phy_kr_training_pre(struct xgbe_prv_data *pdata)
+{
+		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 1);
+}
+
+static void xgbe_phy_kr_training_post(struct xgbe_prv_data *pdata)
+{
+		XSIR0_IOWRITE_BITS(pdata, SIR0_KR_RT_1, RESET, 0);
+}
+
+static enum xgbe_mode xgbe_phy_an_outcome(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int ad_reg, lp_reg;
+
+	pdata->phy.lp_advertising |= ADVERTISED_Autoneg;
+	pdata->phy.lp_advertising |= ADVERTISED_Backplane;
+
+	/* Compare Advertisement and Link Partner register 1 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA);
+	if (lp_reg & 0x400)
+		pdata->phy.lp_advertising |= ADVERTISED_Pause;
+	if (lp_reg & 0x800)
+		pdata->phy.lp_advertising |= ADVERTISED_Asym_Pause;
+
+	if (pdata->phy.pause_autoneg) {
+		/* Set flow control based on auto-negotiation result */
+		pdata->phy.tx_pause = 0;
+		pdata->phy.rx_pause = 0;
+
+		if (ad_reg & lp_reg & 0x400) {
+			pdata->phy.tx_pause = 1;
+			pdata->phy.rx_pause = 1;
+		} else if (ad_reg & lp_reg & 0x800) {
+			if (ad_reg & 0x400)
+				pdata->phy.rx_pause = 1;
+			else if (lp_reg & 0x400)
+				pdata->phy.tx_pause = 1;
+		}
+	}
+
+	/* Compare Advertisement and Link Partner register 2 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 1);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 1);
+	if (lp_reg & 0x80)
+		pdata->phy.lp_advertising |= ADVERTISED_10000baseKR_Full;
+	if (lp_reg & 0x20) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			pdata->phy.lp_advertising |= ADVERTISED_2500baseX_Full;
+		else
+			pdata->phy.lp_advertising |= ADVERTISED_1000baseKX_Full;
+	}
+
+	ad_reg &= lp_reg;
+	if (ad_reg & 0x80) {
+		mode = XGBE_MODE_KR;
+	} else if (ad_reg & 0x20) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	} else {
+		mode = XGBE_MODE_UNKNOWN;
+	}
+
+	/* Compare Advertisement and Link Partner register 3 */
+	ad_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_ADVERTISE + 2);
+	lp_reg = XMDIO_READ(pdata, MDIO_MMD_AN, MDIO_AN_LPA + 2);
+	if (lp_reg & 0xc000)
+		pdata->phy.lp_advertising |= ADVERTISED_10000baseR_FEC;
+
+	return mode;
+}
+
+static void xgbe_phy_pcs_power_cycle(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg;
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+
+	reg |= MDIO_CTRL1_LPOWER;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	usleep_range(75, 100);
+
+	reg &= ~MDIO_CTRL1_LPOWER;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+}
+
+static void xgbe_phy_start_ratechange(struct xgbe_prv_data *pdata)
+{
+	/* Assert Rx and Tx ratechange */
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 1);
+}
+
+static void xgbe_phy_complete_ratechange(struct xgbe_prv_data *pdata)
+{
+	unsigned int wait;
+	u16 status;
+
+	/* Release Rx and Tx ratechange */
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, RATECHANGE, 0);
+
+	/* Wait for Rx and Tx ready */
+	wait = XGBE_RATECHANGE_COUNT;
+	while (wait--) {
+		usleep_range(50, 75);
+
+		status = XSIR0_IOREAD(pdata, SIR0_STATUS);
+		if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) &&
+		    XSIR_GET_BITS(status, SIR0_STATUS, TX_READY))
+			goto rx_reset;
+	}
+
+	netif_dbg(pdata, link, pdata->netdev, "SerDes rx/tx not ready (%#hx)\n",
+		  status);
+
+rx_reset:
+	/* Perform Rx reset for the DFE changes */
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 0);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG6, RESETB_RXD, 1);
+}
+
+static void xgbe_phy_kr_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KR/10G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBR;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED10G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 10G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_10000_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_10000_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_10000_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_10000]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_10000]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_10000]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "10GbE KR mode set\n");
+}
+
+static void xgbe_phy_kx_2500_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KX/1G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBX;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED1G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 2.5G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_2500_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_2500_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_2500_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_2500]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_2500]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_2500]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "2.5GbE KX mode set\n");
+}
+
+static void xgbe_phy_kx_1000_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	unsigned int reg;
+
+	/* Set PCS to KX/1G speed */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= ~MDIO_PCS_CTRL2_TYPE;
+	reg |= MDIO_PCS_CTRL2_10GBX;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL2, reg);
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg &= ~MDIO_CTRL1_SPEEDSEL;
+	reg |= MDIO_CTRL1_SPEED1G;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	xgbe_phy_pcs_power_cycle(pdata);
+
+	/* Set SerDes to 1G speed */
+	xgbe_phy_start_ratechange(pdata);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, DATARATE, XGBE_SPEED_1000_RATE);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, WORDMODE, XGBE_SPEED_1000_WORD);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, PLLSEL, XGBE_SPEED_1000_PLL);
+
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, CDR_RATE,
+			   phy_data->cdr_rate[XGBE_SPEED_1000]);
+	XSIR1_IOWRITE_BITS(pdata, SIR1_SPEED, TXAMP,
+			   phy_data->tx_amp[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG20, BLWC_ENA,
+			   phy_data->blwc[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG114, PQ_REG,
+			   phy_data->pq_skew[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE_BITS(pdata, RXTX_REG129, RXDFE_CONFIG,
+			   phy_data->dfe_tap_cfg[XGBE_SPEED_1000]);
+	XRXTX_IOWRITE(pdata, RXTX_REG22,
+		      phy_data->dfe_tap_ena[XGBE_SPEED_1000]);
+
+	xgbe_phy_complete_ratechange(pdata);
+
+	netif_dbg(pdata, link, pdata->netdev, "1GbE KX mode set\n");
+}
+
+static enum xgbe_mode xgbe_phy_cur_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+	unsigned int reg;
+
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL2);
+	reg &= MDIO_PCS_CTRL2_TYPE;
+
+	if (reg == MDIO_PCS_CTRL2_10GBR) {
+		mode = XGBE_MODE_KR;
+	} else {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_switch_mode(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	enum xgbe_mode mode;
+
+	/* If we are in KR switch to KX, and vice-versa */
+	if (xgbe_phy_cur_mode(pdata) == XGBE_MODE_KR) {
+		if (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			mode = XGBE_MODE_KX_2500;
+		else
+			mode = XGBE_MODE_KX_1000;
+	} else {
+		mode = XGBE_MODE_KR;
+	}
+
+	return mode;
+}
+
+static enum xgbe_mode xgbe_phy_get_mode(struct xgbe_prv_data *pdata,
+					int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (speed) {
+	case SPEED_1000:
+		return (phy_data->speed_set == XGBE_SPEEDSET_1000_10000)
+			? XGBE_MODE_KX_1000 : XGBE_MODE_UNKNOWN;
+	case SPEED_2500:
+		return (phy_data->speed_set == XGBE_SPEEDSET_2500_10000)
+			? XGBE_MODE_KX_2500 : XGBE_MODE_UNKNOWN;
+	case SPEED_10000:
+		return XGBE_MODE_KR;
+	default:
+		return XGBE_MODE_UNKNOWN;
+	}
+}
+
+static void xgbe_phy_set_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		xgbe_phy_kx_1000_mode(pdata);
+		break;
+	case XGBE_MODE_KX_2500:
+		xgbe_phy_kx_2500_mode(pdata);
+		break;
+	case XGBE_MODE_KR:
+		xgbe_phy_kr_mode(pdata);
+		break;
+	default:
+		break;
+	}
+}
+
+static bool xgbe_phy_check_mode(struct xgbe_prv_data *pdata,
+				enum xgbe_mode mode, u32 advert)
+{
+	if (pdata->phy.autoneg == AUTONEG_ENABLE) {
+		if (pdata->phy.advertising & advert)
+			return true;
+	} else {
+		enum xgbe_mode cur_mode;
+
+		cur_mode = xgbe_phy_get_mode(pdata, pdata->phy.speed);
+		if (cur_mode == mode)
+			return true;
+	}
+
+	return false;
+}
+
+static bool xgbe_phy_use_mode(struct xgbe_prv_data *pdata, enum xgbe_mode mode)
+{
+	switch (mode) {
+	case XGBE_MODE_KX_1000:
+		return xgbe_phy_check_mode(pdata, mode,
+					   ADVERTISED_1000baseKX_Full);
+	case XGBE_MODE_KX_2500:
+		return xgbe_phy_check_mode(pdata, mode,
+					   ADVERTISED_2500baseX_Full);
+	case XGBE_MODE_KR:
+		return xgbe_phy_check_mode(pdata, mode,
+					   ADVERTISED_10000baseKR_Full);
+	default:
+		return false;
+	}
+}
+
+static bool xgbe_phy_valid_speed(struct xgbe_prv_data *pdata, int speed)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	switch (speed) {
+	case SPEED_1000:
+		if (phy_data->speed_set != XGBE_SPEEDSET_1000_10000)
+			return false;
+		return true;
+	case SPEED_2500:
+		if (phy_data->speed_set != XGBE_SPEEDSET_2500_10000)
+			return false;
+		return true;
+	case SPEED_10000:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int xgbe_phy_link_status(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg;
+
+	/* Link status is latched low, so read once to clear
+	 * and then read again to get current state
+	 */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_STAT1);
+
+	return (reg & MDIO_STAT1_LSTATUS) ? 1 : 0;
+}
+
+static void xgbe_phy_stop(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for stop */
+}
+
+static int xgbe_phy_start(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for start */
+	return 0;
+}
+
+static int xgbe_phy_reset(struct xgbe_prv_data *pdata)
+{
+	unsigned int reg, count;
+
+	/* Perform a software reset of the PCS */
+	reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	reg |= MDIO_CTRL1_RESET;
+	XMDIO_WRITE(pdata, MDIO_MMD_PCS, MDIO_CTRL1, reg);
+
+	count = 50;
+	do {
+		msleep(20);
+		reg = XMDIO_READ(pdata, MDIO_MMD_PCS, MDIO_CTRL1);
+	} while ((reg & MDIO_CTRL1_RESET) && --count);
+
+	if (reg & MDIO_CTRL1_RESET)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void xgbe_phy_exit(struct xgbe_prv_data *pdata)
+{
+	/* Nothing uniquely required for exit */
+}
+
+static int xgbe_phy_init(struct xgbe_prv_data *pdata)
+{
+	struct xgbe_phy_data *phy_data;
+	int ret;
+
+	phy_data = devm_kzalloc(pdata->dev, sizeof(*phy_data), GFP_KERNEL);
+	if (!phy_data)
+		return -ENOMEM;
+
+	/* Retrieve the PHY speedset */
+	ret = device_property_read_u32(pdata->phy_dev, XGBE_SPEEDSET_PROPERTY,
+				       &phy_data->speed_set);
+	if (ret) {
+		dev_err(pdata->dev, "invalid %s property\n",
+			XGBE_SPEEDSET_PROPERTY);
+		return ret;
+	}
+
+	switch (phy_data->speed_set) {
+	case XGBE_SPEEDSET_1000_10000:
+	case XGBE_SPEEDSET_2500_10000:
+		break;
+	default:
+		dev_err(pdata->dev, "invalid %s property\n",
+			XGBE_SPEEDSET_PROPERTY);
+		return -EINVAL;
+	}
+
+	/* Retrieve the PHY configuration properties */
+	if (device_property_present(pdata->phy_dev, XGBE_BLWC_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_BLWC_PROPERTY,
+						     phy_data->blwc,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_BLWC_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->blwc, xgbe_phy_blwc,
+		       sizeof(phy_data->blwc));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_CDR_RATE_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_CDR_RATE_PROPERTY,
+						     phy_data->cdr_rate,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_CDR_RATE_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->cdr_rate, xgbe_phy_cdr_rate,
+		       sizeof(phy_data->cdr_rate));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_PQ_SKEW_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_PQ_SKEW_PROPERTY,
+						     phy_data->pq_skew,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_PQ_SKEW_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->pq_skew, xgbe_phy_pq_skew,
+		       sizeof(phy_data->pq_skew));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_TX_AMP_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_TX_AMP_PROPERTY,
+						     phy_data->tx_amp,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_TX_AMP_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->tx_amp, xgbe_phy_tx_amp,
+		       sizeof(phy_data->tx_amp));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_DFE_CFG_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_DFE_CFG_PROPERTY,
+						     phy_data->dfe_tap_cfg,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_DFE_CFG_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->dfe_tap_cfg, xgbe_phy_dfe_tap_cfg,
+		       sizeof(phy_data->dfe_tap_cfg));
+	}
+
+	if (device_property_present(pdata->phy_dev, XGBE_DFE_ENA_PROPERTY)) {
+		ret = device_property_read_u32_array(pdata->phy_dev,
+						     XGBE_DFE_ENA_PROPERTY,
+						     phy_data->dfe_tap_ena,
+						     XGBE_SPEEDS);
+		if (ret) {
+			dev_err(pdata->dev, "invalid %s property\n",
+				XGBE_DFE_ENA_PROPERTY);
+			return ret;
+		}
+	} else {
+		memcpy(phy_data->dfe_tap_ena, xgbe_phy_dfe_tap_ena,
+		       sizeof(phy_data->dfe_tap_ena));
+	}
+
+	/* Initialize supported features */
+	pdata->phy.supported = SUPPORTED_Autoneg;
+	pdata->phy.supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+	pdata->phy.supported |= SUPPORTED_Backplane;
+	pdata->phy.supported |= SUPPORTED_10000baseKR_Full;
+	switch (phy_data->speed_set) {
+	case XGBE_SPEEDSET_1000_10000:
+		pdata->phy.supported |= SUPPORTED_1000baseKX_Full;
+		break;
+	case XGBE_SPEEDSET_2500_10000:
+		pdata->phy.supported |= SUPPORTED_2500baseX_Full;
+		break;
+	}
+
+	if (pdata->fec_ability & MDIO_PMA_10GBR_FECABLE_ABLE)
+		pdata->phy.supported |= SUPPORTED_10000baseR_FEC;
+
+	pdata->phy_data = phy_data;
+
+	return 0;
+}
+
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *phy_if)
+{
+	struct xgbe_phy_impl_if *phy_impl = &phy_if->phy_impl;
+
+	phy_impl->init			= xgbe_phy_init;
+	phy_impl->exit			= xgbe_phy_exit;
+
+	phy_impl->reset			= xgbe_phy_reset;
+	phy_impl->start			= xgbe_phy_start;
+	phy_impl->stop			= xgbe_phy_stop;
+
+	phy_impl->link_status		= xgbe_phy_link_status;
+
+	phy_impl->valid_speed		= xgbe_phy_valid_speed;
+
+	phy_impl->use_mode		= xgbe_phy_use_mode;
+	phy_impl->set_mode		= xgbe_phy_set_mode;
+	phy_impl->get_mode		= xgbe_phy_get_mode;
+	phy_impl->switch_mode		= xgbe_phy_switch_mode;
+	phy_impl->cur_mode		= xgbe_phy_cur_mode;
+
+	phy_impl->an_outcome		= xgbe_phy_an_outcome;
+
+	phy_impl->kr_training_pre	= xgbe_phy_kr_training_pre;
+	phy_impl->kr_training_post	= xgbe_phy_kr_training_post;
+}
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -129,7 +129,7 @@
 #include <net/dcbnl.h>
 
 #define XGBE_DRV_NAME		"amd-xgbe"
-#define XGBE_DRV_VERSION	"1.0.2"
+#define XGBE_DRV_VERSION	"1.0.3"
 #define XGBE_DRV_DESC		"AMD 10 Gigabit Ethernet Driver"
 
 /* Descriptor related defines */
@@ -183,12 +183,6 @@
 #define XGBE_PHY_MODE_PROPERTY	"phy-mode"
 #define XGBE_DMA_IRQS_PROPERTY	"amd,per-channel-interrupt"
 #define XGBE_SPEEDSET_PROPERTY	"amd,speed-set"
-#define XGBE_BLWC_PROPERTY	"amd,serdes-blwc"
-#define XGBE_CDR_RATE_PROPERTY	"amd,serdes-cdr-rate"
-#define XGBE_PQ_SKEW_PROPERTY	"amd,serdes-pq-skew"
-#define XGBE_TX_AMP_PROPERTY	"amd,serdes-tx-amp"
-#define XGBE_DFE_CFG_PROPERTY	"amd,serdes-dfe-tap-config"
-#define XGBE_DFE_ENA_PROPERTY	"amd,serdes-dfe-tap-enable"
 
 /* Device-tree clock names */
 #define XGBE_DMA_CLOCK		"dma_clk"
@@ -251,40 +245,6 @@
 #define XGBE_AN_PG_RCV			0x04
 #define XGBE_AN_INT_MASK		0x07
 
-/* Rate-change complete wait/retry count */
-#define XGBE_RATECHANGE_COUNT		500
-
-/* Default SerDes settings */
-#define XGBE_SPEED_10000_BLWC		0
-#define XGBE_SPEED_10000_CDR		0x7
-#define XGBE_SPEED_10000_PLL		0x1
-#define XGBE_SPEED_10000_PQ		0x12
-#define XGBE_SPEED_10000_RATE		0x0
-#define XGBE_SPEED_10000_TXAMP		0xa
-#define XGBE_SPEED_10000_WORD		0x7
-#define XGBE_SPEED_10000_DFE_TAP_CONFIG	0x1
-#define XGBE_SPEED_10000_DFE_TAP_ENABLE	0x7f
-
-#define XGBE_SPEED_2500_BLWC		1
-#define XGBE_SPEED_2500_CDR		0x2
-#define XGBE_SPEED_2500_PLL		0x0
-#define XGBE_SPEED_2500_PQ		0xa
-#define XGBE_SPEED_2500_RATE		0x1
-#define XGBE_SPEED_2500_TXAMP		0xf
-#define XGBE_SPEED_2500_WORD		0x1
-#define XGBE_SPEED_2500_DFE_TAP_CONFIG	0x3
-#define XGBE_SPEED_2500_DFE_TAP_ENABLE	0x0
-
-#define XGBE_SPEED_1000_BLWC		1
-#define XGBE_SPEED_1000_CDR		0x2
-#define XGBE_SPEED_1000_PLL		0x0
-#define XGBE_SPEED_1000_PQ		0xa
-#define XGBE_SPEED_1000_RATE		0x3
-#define XGBE_SPEED_1000_TXAMP		0xf
-#define XGBE_SPEED_1000_WORD		0x1
-#define XGBE_SPEED_1000_DFE_TAP_CONFIG	0x3
-#define XGBE_SPEED_1000_DFE_TAP_ENABLE	0x0
-
 struct xgbe_prv_data;
 
 struct xgbe_packet_data {
@@ -504,8 +464,10 @@ enum xgbe_rx {
 };
 
 enum xgbe_mode {
-	XGBE_MODE_KR = 0,
-	XGBE_MODE_KX,
+	XGBE_MODE_KX_1000 = 0,
+	XGBE_MODE_KX_2500,
+	XGBE_MODE_KR,
+	XGBE_MODE_UNKNOWN,
 };
 
 enum xgbe_speedset {
@@ -601,9 +563,7 @@ struct xgbe_hw_if {
 
 	int (*read_mmd_regs)(struct xgbe_prv_data *, int, int);
 	void (*write_mmd_regs)(struct xgbe_prv_data *, int, int, int);
-	int (*set_gmii_speed)(struct xgbe_prv_data *);
-	int (*set_gmii_2500_speed)(struct xgbe_prv_data *);
-	int (*set_xgmii_speed)(struct xgbe_prv_data *);
+	int (*set_speed)(struct xgbe_prv_data *, int);
 
 	void (*enable_tx)(struct xgbe_prv_data *);
 	void (*disable_tx)(struct xgbe_prv_data *);
@@ -684,9 +644,50 @@ struct xgbe_hw_if {
 	int (*set_rss_lookup_table)(struct xgbe_prv_data *, const u32 *);
 };
 
+/* This structure represents implementation specific routines for an
+ * implementation of a PHY. All routines are required unless noted below.
+ *   Optional routines:
+ *     kr_training_pre, kr_training_post
+ */
+struct xgbe_phy_impl_if {
+	/* Perform Setup/teardown actions */
+	int (*init)(struct xgbe_prv_data *);
+	void (*exit)(struct xgbe_prv_data *);
+
+	/* Perform start/stop specific actions */
+	int (*reset)(struct xgbe_prv_data *);
+	int (*start)(struct xgbe_prv_data *);
+	void (*stop)(struct xgbe_prv_data *);
+
+	/* Return the link status */
+	int (*link_status)(struct xgbe_prv_data *);
+
+	/* Indicate if a particular speed is valid */
+	bool (*valid_speed)(struct xgbe_prv_data *, int);
+
+	/* Check if the specified mode can/should be used */
+	bool (*use_mode)(struct xgbe_prv_data *, enum xgbe_mode);
+	/* Switch the PHY into various modes */
+	void (*set_mode)(struct xgbe_prv_data *, enum xgbe_mode);
+	/* Retrieve mode needed for a specific speed */
+	enum xgbe_mode (*get_mode)(struct xgbe_prv_data *, int);
+	/* Retrieve new/next mode when trying to auto-negotiate */
+	enum xgbe_mode (*switch_mode)(struct xgbe_prv_data *);
+	/* Retrieve current mode */
+	enum xgbe_mode (*cur_mode)(struct xgbe_prv_data *);
+
+	/* Process results of auto-negotiation */
+	enum xgbe_mode (*an_outcome)(struct xgbe_prv_data *);
+
+	/* Pre/Post KR training enablement support */
+	void (*kr_training_pre)(struct xgbe_prv_data *);
+	void (*kr_training_post)(struct xgbe_prv_data *);
+};
+
 struct xgbe_phy_if {
-	/* For initial PHY setup */
-	void (*phy_init)(struct xgbe_prv_data *);
+	/* For PHY setup/teardown */
+	int (*phy_init)(struct xgbe_prv_data *);
+	void (*phy_exit)(struct xgbe_prv_data *);
 
 	/* For PHY support when setting device up/down */
 	int (*phy_reset)(struct xgbe_prv_data *);
@@ -696,6 +697,12 @@ struct xgbe_phy_if {
 	/* For PHY support while device is up */
 	void (*phy_status)(struct xgbe_prv_data *);
 	int (*phy_config_aneg)(struct xgbe_prv_data *);
+
+	/* For PHY settings validation */
+	bool (*phy_valid_speed)(struct xgbe_prv_data *, int);
+
+	/* PHY implementation specific services */
+	struct xgbe_phy_impl_if phy_impl;
 };
 
 struct xgbe_desc_if {
@@ -755,11 +762,20 @@ struct xgbe_hw_features {
 	unsigned int aux_snap_num;	/* Number of Aux snapshot inputs */
 };
 
+struct xgbe_version_data {
+	void (*init_function_ptrs_phy_impl)(struct xgbe_phy_if *);
+};
+
 struct xgbe_prv_data {
 	struct net_device *netdev;
 	struct platform_device *pdev;
 	struct acpi_device *adev;
 	struct device *dev;
+	struct platform_device *phy_pdev;
+	struct device *phy_dev;
+
+	/* Version related data */
+	struct xgbe_version_data *vdata;
 
 	/* ACPI or DT flag */
 	unsigned int use_acpi;
@@ -901,6 +917,8 @@ struct xgbe_prv_data {
 	int phy_speed;
 
 	/* MDIO/PHY related settings */
+	unsigned int phy_started;
+	void *phy_data;
 	struct xgbe_phy phy;
 	int mdio_mmd;
 	unsigned long link_check;
@@ -911,21 +929,6 @@ struct xgbe_prv_data {
 	int an_irq;
 	struct work_struct an_irq_work;
 
-	unsigned int speed_set;
-
-	/* SerDes UEFI configurable settings.
-	 *   Switching between modes/speeds requires new values for some
-	 *   SerDes settings.  The values can be supplied as device
-	 *   properties in array format.  The first array entry is for
-	 *   1GbE, second for 2.5GbE and third for 10GbE
-	 */
-	u32 serdes_blwc[XGBE_SPEEDS];
-	u32 serdes_cdr_rate[XGBE_SPEEDS];
-	u32 serdes_pq_skew[XGBE_SPEEDS];
-	u32 serdes_tx_amp[XGBE_SPEEDS];
-	u32 serdes_dfe_tap_cfg[XGBE_SPEEDS];
-	u32 serdes_dfe_tap_ena[XGBE_SPEEDS];
-
 	/* Auto-negotiation state machine support */
 	unsigned int an_int;
 	struct mutex an_mutex;
@@ -955,6 +958,7 @@ struct xgbe_prv_data {
 
 void xgbe_init_function_ptrs_dev(struct xgbe_hw_if *);
 void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *);
+void xgbe_init_function_ptrs_phy_v1(struct xgbe_phy_if *);
 void xgbe_init_function_ptrs_desc(struct xgbe_desc_if *);
 const struct net_device_ops *xgbe_get_netdev_ops(void);
 const struct ethtool_ops *xgbe_get_ethtool_ops(void);

[PATCH 4.9 114/152] ARM: davinci: PM: support da8xx DT platforms

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kevin Hilman <khilman@baylibre.com>

[ Upstream commit 7e431af8fa0b9ed9d74378c99514856211cb9db8 ]

Add PM support for DA850 device-tree boot.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-davinci/da8xx-dt.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -46,6 +46,7 @@ static struct of_dev_auxdata da850_auxda
 static void __init da850_init_machine(void)
 {
 	of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
+	davinci_pm_init();
 }
 
 static const char *const da850_boards_compat[] __initconst = {

[PATCH 4.9 115/152] ARM: davinci: add skeleton for pdata-quirks

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kevin Hilman <khilman@baylibre.com>

[ Upstream commit 9c9b1bc25291e275b04f758f2549c81e092954f5 ]

Add skeleton pdata-quirks for davinci.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: move changes to build pdata-quirks.c and call
		 to pdata_quirks_init() to this patch]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-davinci/Makefile              |    2 -
 arch/arm/mach-davinci/da8xx-dt.c            |    1 
 arch/arm/mach-davinci/include/mach/common.h |    2 +
 arch/arm/mach-davinci/pdata-quirks.c        |   39 ++++++++++++++++++++++++++++
 4 files changed, 43 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-davinci/pdata-quirks.c

--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 
 # Board specific
-obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o
+obj-$(CONFIG_MACH_DA8XX_DT)		+= da8xx-dt.o pdata-quirks.o
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
 obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -47,6 +47,7 @@ static void __init da850_init_machine(vo
 {
 	of_platform_default_populate(NULL, da850_auxdata_lookup, NULL);
 	davinci_pm_init();
+	pdata_quirks_init();
 }
 
 static const char *const da850_boards_compat[] __initconst = {
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -102,6 +102,8 @@ int davinci_pm_init(void);
 static inline int davinci_pm_init(void) { return 0; }
 #endif
 
+void __init pdata_quirks_init(void);
+
 #define SRAM_SIZE	SZ_128K
 
 #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
--- /dev/null
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -0,0 +1,39 @@
+/*
+ * Legacy platform_data quirks
+ *
+ * Copyright (C) 2016 BayLibre, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <mach/common.h>
+
+struct pdata_init {
+	const char *compatible;
+	void (*fn)(void);
+};
+
+static void pdata_quirks_check(struct pdata_init *quirks)
+{
+	while (quirks->compatible) {
+		if (of_machine_is_compatible(quirks->compatible)) {
+			if (quirks->fn)
+				quirks->fn();
+			break;
+		}
+		quirks++;
+	}
+}
+
+static struct pdata_init pdata_quirks[] __initdata = {
+	{ /* sentinel */ },
+};
+
+void __init pdata_quirks_init(void)
+{
+	pdata_quirks_check(pdata_quirks);
+}

[PATCH 4.9 117/152] usb: host: xhci-plat: enable BROKEN_PED quirk if platform requested

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <balbi@ti.com>

[ Upstream commit 21939f003ad09355d9c975735750bb22aa37d8de ]

In case 'quirk-broken-port-ped' property is passed in via device property,
we should enable the corresponding BROKEN_PED quirk flag for XHCI core.

[rogerq@ti.com] Updated code from platform data to device property
and added DT binding.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/usb/usb-xhci.txt |    1 +
 drivers/usb/host/xhci-plat.c                       |    3 +++
 2 files changed, 4 insertions(+)

--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -26,6 +26,7 @@ Required properties:
 Optional properties:
   - clocks: reference to a clock
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
+  - quirk-broken-port-ped: set if the controller has broken port disable mechanism
 
 Example:
 	usb@f0931000 {
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -223,6 +223,9 @@ static int xhci_plat_probe(struct platfo
 	if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 
+	if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
+		xhci->quirks |= XHCI_BROKEN_PORT_PED;
+
 	hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
 	if (IS_ERR(hcd->usb_phy)) {
 		ret = PTR_ERR(hcd->usb_phy);

[PATCH 4.9 118/152] usb: dwc3: host: pass quirk-broken-port-ped property for known broken revisions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <felipe.balbi@linux.intel.com>

[ Upstream commit e42a5dbb8a3d14f5a35bffa3bf7dcb87883f767a ]

dwc3 revisions <=3.00a have a limitation where Port Disable command
doesn't work. Set the quirk-broken-port-ped property for such
controllers so XHCI core can do the necessary workaround.

[rogerq@ti.com] Updated code from platform data to device property.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc3/host.c |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -21,11 +21,12 @@
 
 int dwc3_host_init(struct dwc3 *dwc)
 {
-	struct property_entry	props[2];
+	struct property_entry	props[3];
 	struct platform_device	*xhci;
 	int			ret, irq;
 	struct resource		*res;
 	struct platform_device	*dwc3_pdev = to_platform_device(dwc->dev);
+	int			prop_idx = 0;
 
 	irq = platform_get_irq_byname(dwc3_pdev, "host");
 	if (irq == -EPROBE_DEFER)
@@ -89,8 +90,22 @@ int dwc3_host_init(struct dwc3 *dwc)
 
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
-	if (dwc->usb3_lpm_capable) {
-		props[0].name = "usb3-lpm-capable";
+	if (dwc->usb3_lpm_capable)
+		props[prop_idx++].name = "usb3-lpm-capable";
+
+	/**
+	 * WORKAROUND: dwc3 revisions <=3.00a have a limitation
+	 * where Port Disable command doesn't work.
+	 *
+	 * The suggested workaround is that we avoid Port Disable
+	 * completely.
+	 *
+	 * This following flag tells XHCI to do just that.
+	 */
+	if (dwc->revision <= DWC3_REVISION_300A)
+		props[prop_idx++].name = "quirk-broken-port-ped";
+
+	if (prop_idx) {
 		ret = platform_device_add_properties(xhci, props);
 		if (ret) {
 			dev_err(dwc->dev, "failed to add properties to xHCI\n");

[PATCH 4.9 119/152] drm/mga: remove device_is_agp callback

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 858b2c1bf820ebfba89c5e2867ab882bdb5b2f5a ]

It's only for a device quirk, and we might as well do that in the load
callback.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/mga/mga_dma.c |   20 +++++++++++++++++++-
 drivers/gpu/drm/mga/mga_drv.c |   37 -------------------------------------
 2 files changed, 19 insertions(+), 38 deletions(-)

--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -392,6 +392,24 @@ int mga_driver_load(struct drm_device *d
 	drm_mga_private_t *dev_priv;
 	int ret;
 
+	/* There are PCI versions of the G450.  These cards have the
+	 * same PCI ID as the AGP G450, but have an additional PCI-to-PCI
+	 * bridge chip.  We detect these cards, which are not currently
+	 * supported by this driver, by looking at the device ID of the
+	 * bus the "card" is on.  If vendor is 0x3388 (Hint Corp) and the
+	 * device is 0x0021 (HB6 Universal PCI-PCI bridge), we reject the
+	 * device.
+	 */
+	if ((dev->pdev->device == 0x0525) && dev->pdev->bus->self
+	    && (dev->pdev->bus->self->vendor == 0x3388)
+	    && (dev->pdev->bus->self->device == 0x0021)
+	    && dev->agp) {
+		/* FIXME: This should be quirked in the pci core, but oh well
+		 * the hw probably stopped existing. */
+		arch_phys_wc_del(dev->agp->agp_mtrr);
+		kfree(dev->agp);
+		dev->agp = NULL;
+	}
 	dev_priv = kzalloc(sizeof(drm_mga_private_t), GFP_KERNEL);
 	if (!dev_priv)
 		return -ENOMEM;
@@ -698,7 +716,7 @@ static int mga_do_pci_dma_bootstrap(stru
 static int mga_do_dma_bootstrap(struct drm_device *dev,
 				drm_mga_dma_bootstrap_t *dma_bs)
 {
-	const int is_agp = (dma_bs->agp_mode != 0) && drm_pci_device_is_agp(dev);
+	const int is_agp = (dma_bs->agp_mode != 0) && dev->agp;
 	int err;
 	drm_mga_private_t *const dev_priv =
 	    (drm_mga_private_t *) dev->dev_private;
--- a/drivers/gpu/drm/mga/mga_drv.c
+++ b/drivers/gpu/drm/mga/mga_drv.c
@@ -37,8 +37,6 @@
 
 #include <drm/drm_pciids.h>
 
-static int mga_driver_device_is_agp(struct drm_device *dev);
-
 static struct pci_device_id pciidlist[] = {
 	mga_PCI_IDS
 };
@@ -66,7 +64,6 @@ static struct drm_driver driver = {
 	.lastclose = mga_driver_lastclose,
 	.set_busid = drm_pci_set_busid,
 	.dma_quiescent = mga_driver_dma_quiescent,
-	.device_is_agp = mga_driver_device_is_agp,
 	.get_vblank_counter = mga_get_vblank_counter,
 	.enable_vblank = mga_enable_vblank,
 	.disable_vblank = mga_disable_vblank,
@@ -107,37 +104,3 @@ module_exit(mga_exit);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL and additional rights");
-
-/**
- * Determine if the device really is AGP or not.
- *
- * In addition to the usual tests performed by \c drm_device_is_agp, this
- * function detects PCI G450 cards that appear to the system exactly like
- * AGP G450 cards.
- *
- * \param dev   The device to be tested.
- *
- * \returns
- * If the device is a PCI G450, zero is returned.  Otherwise 2 is returned.
- */
-static int mga_driver_device_is_agp(struct drm_device *dev)
-{
-	const struct pci_dev *const pdev = dev->pdev;
-
-	/* There are PCI versions of the G450.  These cards have the
-	 * same PCI ID as the AGP G450, but have an additional PCI-to-PCI
-	 * bridge chip.  We detect these cards, which are not currently
-	 * supported by this driver, by looking at the device ID of the
-	 * bus the "card" is on.  If vendor is 0x3388 (Hint Corp) and the
-	 * device is 0x0021 (HB6 Universal PCI-PCI bridge), we reject the
-	 * device.
-	 */
-
-	if ((pdev->device == 0x0525) && pdev->bus->self
-	    && (pdev->bus->self->vendor == 0x3388)
-	    && (pdev->bus->self->device == 0x0021)) {
-		return 0;
-	}
-
-	return 2;
-}

[PATCH 4.9 120/152] ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrice Chotard <patrice.chotard@st.com>

[ Upstream commit 8413299cb3933dade6186bbee8363f190032107e ]

Since v4.10-rc1, the following logs appears in loop :
[  801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[  801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[  801.966611] usb usb6-port1: cannot disable (err = -32)
[  806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[  806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[  806.096494] usb usb6-port1: cannot disable (err = -32)

After analysis, xhci try to set link in U3 and returns an error.
Using snps,dis_u3_susphy_quirk fix this issue.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/boot/dts/stih407-family.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -680,6 +680,7 @@
 				phy-names	= "usb2-phy", "usb3-phy";
 				phys		= <&usb2_picophy0>,
 						  <&phy_port2 PHY_TYPE_USB3>;
+				snps,dis_u3_susphy_quirk;
 			};
 		};
 

[PATCH 4.9 121/152] PCI: Add ACS quirk for Intel Union Point

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

[ Upstream commit 7184f5b451cf3dc61de79091d235b5d2bba2782d ]

Intel 200-series chipsets have the same errata as 100-series: the ACS
capability doesn't follow the PCIe spec, the capability and control
registers are dwords rather than words.  Add PCIe root port device IDs to
existing quirk.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |   28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4151,15 +4151,35 @@ static int pci_quirk_intel_pch_acs(struc
  *
  * N.B. This doesn't fix what lspci shows.
  *
+ * The 100 series chipset specification update includes this as errata #23[3].
+ *
+ * The 200 series chipset (Union Point) has the same bug according to the
+ * specification update (Intel 200 Series Chipset Family Platform Controller
+ * Hub, Specification Update, January 2017, Revision 001, Document# 335194-001,
+ * Errata 22)[4].  Per the datasheet[5], root port PCI Device IDs for this
+ * chipset include:
+ *
+ * 0xa290-0xa29f PCI Express Root port #{0-16}
+ * 0xa2e7-0xa2ee PCI Express Root port #{17-24}
+ *
  * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html
  * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html
+ * [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html
+ * [4] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-spec-update.html
+ * [5] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-datasheet-vol-1.html
  */
 static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev)
 {
-	return pci_is_pcie(dev) &&
-		pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT &&
-		((dev->device & ~0xf) == 0xa110 ||
-		 (dev->device >= 0xa167 && dev->device <= 0xa16a));
+	if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+		return false;
+
+	switch (dev->device) {
+	case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */
+	case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */
+		return true;
+	}
+
+	return false;
 }
 
 #define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4)

[PATCH 4.9 122/152] PCI: xgene: Fix double free on init error

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 1ded56df3247d358390ae6dc09ccee620262ac5f ]

The "port" variable was allocated with devm_kzalloc() so if we free it with
kfree() it will be freed twice.  Also I changed it to propogate the error
from devm_ioremap_resource() instead of returning -ENOMEM.

Fixes: c5d460396100 ("PCI: Add MCFG quirks for X-Gene host controller")
Also-posted-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/host/pci-xgene.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/drivers/pci/host/pci-xgene.c
+++ b/drivers/pci/host/pci-xgene.c
@@ -246,14 +246,11 @@ static int xgene_pcie_ecam_init(struct p
 	ret = xgene_get_csr_resource(adev, &csr);
 	if (ret) {
 		dev_err(dev, "can't get CSR resource\n");
-		kfree(port);
 		return ret;
 	}
 	port->csr_base = devm_ioremap_resource(dev, &csr);
-	if (IS_ERR(port->csr_base)) {
-		kfree(port);
-		return -ENOMEM;
-	}
+	if (IS_ERR(port->csr_base))
+		return PTR_ERR(port->csr_base);
 
 	port->cfg_base = cfg->win;
 	port->version = ipversion;

[PATCH 4.9 123/152] [media] rx51: broken build

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sean Young <sean@mess.org>

[ Upstream commit 922ee72da7c739157ed02ea04a5c100d19f67226 ]

As reported by kernel build test:

   In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
>> arch/arm/mach-omap2/pdata-quirks.c:536:49: error: 'rx51_lirc_data' undeclared here (not in a function)
     OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
                                                    ^
   include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
       .platform_data = _pdata }
                        ^~~~~~

Since "a92def1 [media] ir-rx51: port to rc-core" the build fails on
some arm configurations.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/mach-omap2/pdata-quirks.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -534,7 +534,7 @@ static struct of_dev_auxdata omap_auxdat
 		       &omap3_iommu_pdata),
 	OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
 	OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
-	OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
+	OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
 	/* Only on am3517 */
 	OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
 	OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",

[PATCH 4.9 124/152] sata: ahci-da850: implement a workaround for the softreset quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

[ Upstream commit f4d435f3265661d04e5290a0a0450e3a38898128 ]

There's an issue with the da850 SATA controller: if port multiplier
support is compiled in, but we're connecting the drive directly to
the SATA port on the board, the drive can't be detected.

To make SATA work on the da850-lcdk board: first try to softreset
with pmp - if the operation fails with -EBUSY, retry without pmp.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/ahci_da850.c |   33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

--- a/drivers/ata/ahci_da850.c
+++ b/drivers/ata/ahci_da850.c
@@ -54,11 +54,42 @@ static void da850_sata_init(struct devic
 	writel(val, ahci_base + SATA_P0PHYCR_REG);
 }
 
+static int ahci_da850_softreset(struct ata_link *link,
+				unsigned int *class, unsigned long deadline)
+{
+	int pmp, ret;
+
+	pmp = sata_srst_pmp(link);
+
+	/*
+	 * There's an issue with the SATA controller on da850 SoCs: if we
+	 * enable Port Multiplier support, but the drive is connected directly
+	 * to the board, it can't be detected. As a workaround: if PMP is
+	 * enabled, we first call ahci_do_softreset() and pass it the result of
+	 * sata_srst_pmp(). If this call fails, we retry with pmp = 0.
+	 */
+	ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+	if (pmp && ret == -EBUSY)
+		return ahci_do_softreset(link, class, 0,
+					 deadline, ahci_check_ready);
+
+	return ret;
+}
+
+static struct ata_port_operations ahci_da850_port_ops = {
+	.inherits = &ahci_platform_ops,
+	.softreset = ahci_da850_softreset,
+	/*
+	 * No need to override .pmp_softreset - it's only used for actual
+	 * PMP-enabled ports.
+	 */
+};
+
 static const struct ata_port_info ahci_da850_port_info = {
 	.flags		= AHCI_FLAG_COMMON,
 	.pio_mask	= ATA_PIO4,
 	.udma_mask	= ATA_UDMA6,
-	.port_ops	= &ahci_platform_ops,
+	.port_ops	= &ahci_da850_port_ops,
 };
 
 static struct scsi_host_template ahci_platform_sht = {

[PATCH 4.9 125/152] ACPI / button: Change default behavior to lid_init_state=open

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lv Zheng <lv.zheng@intel.com>

[ Upstream commit 77e9a4aa9de10cc1418bf9a892366988802a8025 ]

More and more platforms need the button.lid_init_state=open quirk. This
patch sets it the default behavior.

If a platform doesn't send lid open event or lid open event is lost due to
the underlying system problems, then we can compare various combinations:
1. systemd/acpid is used to suspend system or not, systemd has a special
   logic forcing open event after resuming;
2. _LID returns a cached value or not.

The result is as follows:

 1. lid_init_state=method
   1. cached
      1. resumed by lid:
         (x) event=close
         (x) systemd=suspends again
         (x) acpid=suspends again
         (x) state=close
      2. resumed by other:
         (o) event=close
         (x) systemd=suspends again
         (x) acpid=suspends again
         (o) state=close
   2. non-cached
      1. resumed by lid:
         (o) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=open
      2. resumed by other:
         (o) event=close
         (x) systemd=suspends again
         (x) acpid=suspends again
         (o) state=close
 2. lid_init_state=open
   1. cached
      1. resumed by lid:
         (o) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (x) state=close
      2. resumed by other:
         (x) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=close
   2. non-cached
      1. resumed by lid:
         (o) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=open
      2. resumed by other:
         (x) event=open
         (o) systemd=resumes
         (o) acpid=resumes
         (o) state=close
 3. lid_init_state=ignore
   1. cached
      1. resumed by lid:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (x) state=close
      2. resumed by other:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (o) state=close
   2. non-cached
      1. resumed by lid:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (o) state=open
      2. resumed by other:
         (o) event=none
         (x) systemd=suspends again
         (o) acpid=resumes
         (o) state=close

As a conclusion:
 1. With systemd changed, lid_init_state=ignore has only one problem and the
    problem comes from an underlying issue, not userspace and kernel lid
    handling.
 2. Without systemd changed, lid_init_state=open can be the default
    behavior as the pass ratio is not much worse than lid_init_state=ignore.
 3. lid_init_state=method is buggy, we can have a separate patch to make it
    deprectated.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/button.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -113,7 +113,7 @@ struct acpi_button {
 
 static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
 static struct acpi_device *lid_device;
-static u8 lid_init_state = ACPI_BUTTON_LID_INIT_METHOD;
+static u8 lid_init_state = ACPI_BUTTON_LID_INIT_OPEN;
 
 static unsigned long lid_report_interval __read_mostly = 500;
 module_param(lid_report_interval, ulong, 0644);

[PATCH 4.9 126/152] ASoC: rt5670: Add missing 10EC5072 ACPI ID

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d25280060835e1b2b84c242905da8334ab15c5b4 ]

rt5670 driver supports also RT5672 codec, but its ACPI ID is missing.
This was found on Dell Wyse 3040 box.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/rt5670.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -2813,6 +2813,7 @@ MODULE_DEVICE_TABLE(i2c, rt5670_i2c_id);
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id rt5670_acpi_match[] = {
 	{ "10EC5670", 0},
+	{ "10EC5672", 0},
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, rt5670_acpi_match);

[PATCH 4.9 127/152] ASoC: codecs: rt5670: add quirk for Lenovo Thinkpad 10

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 93ffeaa8ee3f10a0628ad135b552a2497e0bef2c ]

the BIOS incorrectly reports this codec as 5640 but it is
really a rt5670

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/codecs/rt5670.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/soc/codecs/rt5670.c
+++ b/sound/soc/codecs/rt5670.c
@@ -2814,6 +2814,7 @@ MODULE_DEVICE_TABLE(i2c, rt5670_i2c_id);
 static const struct acpi_device_id rt5670_acpi_match[] = {
 	{ "10EC5670", 0},
 	{ "10EC5672", 0},
+	{ "10EC5640", 0}, /* quirk */
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, rt5670_acpi_match);

[PATCH 4.9 128/152] ASoC: Intel: Baytrail: add quirk for Lenovo Thinkpad 10

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit fd0138dc5d17c636477b371d99265c406437c583 ]

the BIOS reports this codec as RT5640 but it's a rt5670. Use the
quirk mechanism to use the cht_bsw_rt5672 machine driver

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/atom/sst/sst_acpi.c |   37 +++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

--- a/sound/soc/intel/atom/sst/sst_acpi.c
+++ b/sound/soc/intel/atom/sst/sst_acpi.c
@@ -400,6 +400,7 @@ static int sst_acpi_remove(struct platfo
 static unsigned long cht_machine_id;
 
 #define CHT_SURFACE_MACH 1
+#define BYT_THINKPAD_10  2
 
 static int cht_surface_quirk_cb(const struct dmi_system_id *id)
 {
@@ -407,6 +408,23 @@ static int cht_surface_quirk_cb(const st
 	return 1;
 }
 
+static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id)
+{
+	cht_machine_id = BYT_THINKPAD_10;
+	return 1;
+}
+
+
+static const struct dmi_system_id byt_table[] = {
+	{
+		.callback = byt_thinkpad10_quirk_cb,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20C3001VHH"),
+		},
+	},
+	{ }
+};
 
 static const struct dmi_system_id cht_table[] = {
 	{
@@ -424,6 +442,10 @@ static struct sst_acpi_mach cht_surface_
 	"10EC5640", "cht-bsw-rt5645", "intel/fw_sst_22a8.bin", "cht-bsw", NULL,
 								&chv_platform_data };
 
+static struct sst_acpi_mach byt_thinkpad_10 = {
+	"10EC5640", "cht-bsw-rt5672", "intel/fw_sst_0f28.bin", "cht-bsw", NULL,
+	                                                        &byt_rvp_platform_data };
+
 static struct sst_acpi_mach *cht_quirk(void *arg)
 {
 	struct sst_acpi_mach *mach = arg;
@@ -436,8 +458,21 @@ static struct sst_acpi_mach *cht_quirk(v
 		return mach;
 }
 
+static struct sst_acpi_mach *byt_quirk(void *arg)
+{
+	struct sst_acpi_mach *mach = arg;
+
+	dmi_check_system(byt_table);
+
+	if (cht_machine_id == BYT_THINKPAD_10)
+		return &byt_thinkpad_10;
+	else
+		return mach;
+}
+
+
 static struct sst_acpi_mach sst_acpi_bytcr[] = {
-	{"10EC5640", "bytcr_rt5640", "intel/fw_sst_0f28.bin", "bytcr_rt5640", NULL,
+	{"10EC5640", "bytcr_rt5640", "intel/fw_sst_0f28.bin", "bytcr_rt5640", byt_quirk,
 						&byt_rvp_platform_data },
 	{"10EC5642", "bytcr_rt5640", "intel/fw_sst_0f28.bin", "bytcr_rt5640", NULL,
 						&byt_rvp_platform_data },

[PATCH 4.9 129/152] ASoC: Intel: cht_bsw_rt5645: harden ACPI device detection

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 42648c2270ca0c96935dfc5d0f5c4f8d2406cf75 ]

Fix classic issue of having multiple codecs listed in DSDT
but a single one actually enabled. The previous code did
not handle such errors and could also lead to uninitalized
configurations

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/boards/cht_bsw_rt5645.c |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -358,22 +358,32 @@ static int snd_cht_mc_probe(struct platf
 	struct sst_acpi_mach *mach;
 	const char *i2c_name = NULL;
 	int dai_index = 0;
+	bool found = false;
 
 	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC);
 	if (!drv)
 		return -ENOMEM;
 
+	mach = (&pdev->dev)->platform_data;
+
 	for (i = 0; i < ARRAY_SIZE(snd_soc_cards); i++) {
-		if (acpi_dev_found(snd_soc_cards[i].codec_id)) {
+		if (acpi_dev_found(snd_soc_cards[i].codec_id) &&
+			(!strncmp(snd_soc_cards[i].codec_id, mach->id, 8))) {
 			dev_dbg(&pdev->dev,
 				"found codec %s\n", snd_soc_cards[i].codec_id);
 			card = snd_soc_cards[i].soc_card;
 			drv->acpi_card = &snd_soc_cards[i];
+			found = true;
 			break;
 		}
 	}
+
+	if (!found) {
+		dev_err(&pdev->dev, "No matching HID found in supported list\n");
+		return -ENODEV;
+	}
+
 	card->dev = &pdev->dev;
-	mach = card->dev->platform_data;
 	sprintf(drv->codec_name, "i2c-%s:00", drv->acpi_card->codec_id);
 
 	/* set correct codec name */

[PATCH 4.9 130/152] ASoC: Intel: cht_bsw_rt5645: add Baytrail MCLK support

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit a50477e55fff69e1028f25624ee9fc9182d59b1f ]

The existing code assumes a 19.2 MHz MCLK as the default
hardware configuration. This is valid for CherryTrail but
not for Baytrail.

Add explicit MCLK configuration to set the 19.2 clock on/off
depending on DAPM events.

This is a prerequisite step to enable devices with Baytrail
and RT5645 such as Asus X205TA

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/intel/boards/cht_bsw_rt5645.c |   84 +++++++++++++++++++++++++++-----
 1 file changed, 71 insertions(+), 13 deletions(-)

--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -24,6 +24,9 @@
 #include <linux/acpi.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <asm/cpu_device_id.h>
+#include <asm/platform_sst_audio.h>
+#include <linux/clk.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -45,6 +48,7 @@ struct cht_mc_private {
 	struct snd_soc_jack jack;
 	struct cht_acpi_card *acpi_card;
 	char codec_name[16];
+	struct clk *mclk;
 };
 
 static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
@@ -65,6 +69,7 @@ static int platform_clock_control(struct
 	struct snd_soc_dapm_context *dapm = w->dapm;
 	struct snd_soc_card *card = dapm->card;
 	struct snd_soc_dai *codec_dai;
+	struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
 	int ret;
 
 	codec_dai = cht_get_codec_dai(card);
@@ -73,19 +78,30 @@ static int platform_clock_control(struct
 		return -EIO;
 	}
 
-	if (!SND_SOC_DAPM_EVENT_OFF(event))
-		return 0;
+	if (SND_SOC_DAPM_EVENT_ON(event)) {
+		if (ctx->mclk) {
+			ret = clk_prepare_enable(ctx->mclk);
+			if (ret < 0) {
+				dev_err(card->dev,
+					"could not configure MCLK state");
+				return ret;
+			}
+		}
+	} else {
+		/* Set codec sysclk source to its internal clock because codec PLL will
+		 * be off when idle and MCLK will also be off when codec is
+		 * runtime suspended. Codec needs clock for jack detection and button
+		 * press. MCLK is turned off with clock framework or ACPI.
+		 */
+		ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
+					48000 * 512, SND_SOC_CLOCK_IN);
+		if (ret < 0) {
+			dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+			return ret;
+		}
 
-	/* Set codec sysclk source to its internal clock because codec PLL will
-	 * be off when idle and MCLK will also be off by ACPI when codec is
-	 * runtime suspended. Codec needs clock for jack detection and button
-	 * press.
-	 */
-	ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
-			0, SND_SOC_CLOCK_IN);
-	if (ret < 0) {
-		dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
-		return ret;
+		if (ctx->mclk)
+			clk_disable_unprepare(ctx->mclk);
 	}
 
 	return 0;
@@ -97,7 +113,7 @@ static const struct snd_soc_dapm_widget
 	SND_SOC_DAPM_MIC("Int Mic", NULL),
 	SND_SOC_DAPM_SPK("Ext Spk", NULL),
 	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
-			platform_clock_control, SND_SOC_DAPM_POST_PMD),
+			platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
 };
 
 static const struct snd_soc_dapm_route cht_rt5645_audio_map[] = {
@@ -225,6 +241,26 @@ static int cht_codec_init(struct snd_soc
 
 	rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack);
 
+	if (ctx->mclk) {
+		/*
+		 * The firmware might enable the clock at
+		 * boot (this information may or may not
+		 * be reflected in the enable clock register).
+		 * To change the rate we must disable the clock
+		 * first to cover these cases. Due to common
+		 * clock framework restrictions that do not allow
+		 * to disable a clock that has not been enabled,
+		 * we need to enable the clock first.
+		 */
+		ret = clk_prepare_enable(ctx->mclk);
+		if (!ret)
+			clk_disable_unprepare(ctx->mclk);
+
+		ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+		if (ret)
+			dev_err(runtime->dev, "unable to set MCLK rate\n");
+	}
 	return ret;
 }
 
@@ -349,6 +385,18 @@ static struct cht_acpi_card snd_soc_card
 
 static char cht_rt5640_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
 
+static bool is_valleyview(void)
+{
+	static const struct x86_cpu_id cpu_ids[] = {
+		{ X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
+		{}
+	};
+
+	if (!x86_match_cpu(cpu_ids))
+		return false;
+	return true;
+}
+
 static int snd_cht_mc_probe(struct platform_device *pdev)
 {
 	int ret_val = 0;
@@ -401,6 +449,16 @@ static int snd_cht_mc_probe(struct platf
 		cht_dailink[dai_index].codec_name = cht_rt5640_codec_name;
 	}
 
+	if (is_valleyview()) {
+		drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+		if (IS_ERR(drv->mclk)) {
+			dev_err(&pdev->dev,
+				"Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+				PTR_ERR(drv->mclk));
+			return PTR_ERR(drv->mclk);
+		}
+	}
+
 	snd_soc_card_set_drvdata(card, drv);
 	ret_val = devm_snd_soc_register_card(&pdev->dev, card);
 	if (ret_val) {

[PATCH 4.9 131/152] ACPI: save NVS memory for Lenovo G50-45

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhang Rui <rui.zhang@intel.com>

[ Upstream commit cbc00c1310d34139a63946482b40a6b261a03fb9 ]

In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to
accelerate S3), to optimize S3 suspend/resume speed, code is introduced
to ignore NVS memory saving during S3 for all the platforms later than
2012.

But, Lenovo G50-45, a platform released in 2015, still needs NVS memory
saving during S3. A quirk is introduced for this platform.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431
Tested-by: Przemek <soprwa@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Drop unnecessary code ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/acpi/sleep.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -130,6 +130,12 @@ void __init acpi_nvs_nosave_s3(void)
 	nvs_nosave_s3 = true;
 }
 
+static int __init init_nvs_save_s3(const struct dmi_system_id *d)
+{
+	nvs_nosave_s3 = false;
+	return 0;
+}
+
 /*
  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
  * user to request that behavior by using the 'acpi_old_suspend_ordering'
@@ -324,6 +330,19 @@ static struct dmi_system_id acpisleep_dm
 		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 		},
 	},
+	/*
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
+	 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
+	 * saving during S3.
+	 */
+	{
+	.callback = init_nvs_save_s3,
+	.ident = "Lenovo G50-45",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
+		},
+	},
 	{},
 };
 

[PATCH 4.9 132/152] usb: musb: da8xx: Fix host mode suspend

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Bailon <abailon@baylibre.com>

[ Upstream commit 486fc20ac8391338a42b015801b846acda4db7b7 ]

On da8xx, VBUS is not maintained during suspend when musb is in host mode.
On resume, all the connected devices will be disconnected and then will
be enumerated again.
This happens because MUSB_DEVCTL is cleared during suspend.

Use the quirk MUSB_PRESERVE_SESSION to preseve MUSB_DEVCTL during suspend.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/da8xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -434,7 +434,7 @@ static int da8xx_musb_exit(struct musb *
 }
 
 static const struct musb_platform_ops da8xx_ops = {
-	.quirks		= MUSB_INDEXED_EP,
+	.quirks		= MUSB_INDEXED_EP | MUSB_PRESERVE_SESSION,
 	.init		= da8xx_musb_init,
 	.exit		= da8xx_musb_exit,
 

[PATCH 4.9 134/152] HID: wacom: dont apply generic settings to old devices

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ping Cheng <pinglinux@gmail.com>

[ Upstream commit e7deb1570a527d3c74be4e21a72b1b459605c501 ]

Non-generic devices have numbered_buttons set for both pen and
touch interfaces by default. The actual number of buttons on the
interface is normally manually decided later, which is different
from what those HID generic devices are processed, where number
of buttons are directly retrieved from HID descriptors.

This patch adds the missed HID_GENERIC check and moves the statement
to wacom_setup_pad_input_capabilities since it's not a quirk anymore.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hid/wacom_wac.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2896,6 +2896,9 @@ int wacom_setup_pad_input_capabilities(s
 {
 	struct wacom_features *features = &wacom_wac->features;
 
+	if ((features->type == HID_GENERIC) && features->numbered_buttons > 0)
+		features->device_type |= WACOM_DEVICETYPE_PAD;
+
 	if (!(features->device_type & WACOM_DEVICETYPE_PAD))
 		return -ENODEV;
 

[PATCH 4.9 135/152] arm: kernel: Add SMC structure parameter

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Gross <andy.gross@linaro.org>

[ Upstream commit 680a0873e193bae666439f4b5e32c758e68f114c ]

This patch adds a quirk parameter to the arm_smccc_(smc/hvc) calls.
The quirk structure allows for specialized SMC operations due to SoC
specific requirements.  The current arm_smccc_(smc/hvc) is renamed and
macros are used instead to specify the standard arm_smccc_(smc/hvc) or
the arm_smccc_(smc/hvc)_quirk function.

This patch and partial implementation was suggested by Will Deacon.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm/kernel/armksyms.c      |    4 ++--
 arch/arm/kernel/smccc-call.S    |   14 ++++++++------
 arch/arm64/kernel/arm64ksyms.c  |    4 ++--
 arch/arm64/kernel/asm-offsets.c |    7 +++++--
 arch/arm64/kernel/smccc-call.S  |   14 ++++++++------
 include/linux/arm-smccc.h       |   40 ++++++++++++++++++++++++++++++++--------
 6 files changed, 57 insertions(+), 26 deletions(-)

--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -178,6 +178,6 @@ EXPORT_SYMBOL(__pv_offset);
 #endif
 
 #ifdef CONFIG_HAVE_ARM_SMCCC
-EXPORT_SYMBOL(arm_smccc_smc);
-EXPORT_SYMBOL(arm_smccc_hvc);
+EXPORT_SYMBOL(__arm_smccc_smc);
+EXPORT_SYMBOL(__arm_smccc_hvc);
 #endif
--- a/arch/arm/kernel/smccc-call.S
+++ b/arch/arm/kernel/smccc-call.S
@@ -46,17 +46,19 @@ UNWIND(	.fnend)
 /*
  * void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
  *		  unsigned long a3, unsigned long a4, unsigned long a5,
- *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
  */
-ENTRY(arm_smccc_smc)
+ENTRY(__arm_smccc_smc)
 	SMCCC SMCCC_SMC
-ENDPROC(arm_smccc_smc)
+ENDPROC(__arm_smccc_smc)
 
 /*
  * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
  *		  unsigned long a3, unsigned long a4, unsigned long a5,
- *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
  */
-ENTRY(arm_smccc_hvc)
+ENTRY(__arm_smccc_hvc)
 	SMCCC SMCCC_HVC
-ENDPROC(arm_smccc_hvc)
+ENDPROC(__arm_smccc_hvc)
--- a/arch/arm64/kernel/arm64ksyms.c
+++ b/arch/arm64/kernel/arm64ksyms.c
@@ -73,5 +73,5 @@ NOKPROBE_SYMBOL(_mcount);
 #endif
 
 	/* arm-smccc */
-EXPORT_SYMBOL(arm_smccc_smc);
-EXPORT_SYMBOL(arm_smccc_hvc);
+EXPORT_SYMBOL(__arm_smccc_smc);
+EXPORT_SYMBOL(__arm_smccc_hvc);
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -140,8 +140,11 @@ int main(void)
   DEFINE(SLEEP_STACK_DATA_SYSTEM_REGS,	offsetof(struct sleep_stack_data, system_regs));
   DEFINE(SLEEP_STACK_DATA_CALLEE_REGS,	offsetof(struct sleep_stack_data, callee_saved_regs));
 #endif
-  DEFINE(ARM_SMCCC_RES_X0_OFFS,	offsetof(struct arm_smccc_res, a0));
-  DEFINE(ARM_SMCCC_RES_X2_OFFS,	offsetof(struct arm_smccc_res, a2));
+  DEFINE(ARM_SMCCC_RES_X0_OFFS,		offsetof(struct arm_smccc_res, a0));
+  DEFINE(ARM_SMCCC_RES_X2_OFFS,		offsetof(struct arm_smccc_res, a2));
+  DEFINE(ARM_SMCCC_QUIRK_ID_OFFS,	offsetof(struct arm_smccc_quirk, id));
+  DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS,	offsetof(struct arm_smccc_quirk, state));
+
   BLANK();
   DEFINE(HIBERN_PBE_ORIG,	offsetof(struct pbe, orig_address));
   DEFINE(HIBERN_PBE_ADDR,	offsetof(struct pbe, address));
--- a/arch/arm64/kernel/smccc-call.S
+++ b/arch/arm64/kernel/smccc-call.S
@@ -27,17 +27,19 @@
 /*
  * void arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
  *		  unsigned long a3, unsigned long a4, unsigned long a5,
- *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
  */
-ENTRY(arm_smccc_smc)
+ENTRY(__arm_smccc_smc)
 	SMCCC	smc
-ENDPROC(arm_smccc_smc)
+ENDPROC(__arm_smccc_smc)
 
 /*
  * void arm_smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
  *		  unsigned long a3, unsigned long a4, unsigned long a5,
- *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
+ *		  unsigned long a6, unsigned long a7, struct arm_smccc_res *res,
+ *		  struct arm_smccc_quirk *quirk)
  */
-ENTRY(arm_smccc_hvc)
+ENTRY(__arm_smccc_hvc)
 	SMCCC	hvc
-ENDPROC(arm_smccc_hvc)
+ENDPROC(__arm_smccc_hvc)
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -72,33 +72,57 @@ struct arm_smccc_res {
 };
 
 /**
- * arm_smccc_smc() - make SMC calls
+ * struct arm_smccc_quirk - Contains quirk information
+ * @id: quirk identification
+ * @state: quirk specific information
+ * @a6: Qualcomm quirk entry for returning post-smc call contents of a6
+ */
+struct arm_smccc_quirk {
+	int	id;
+	union {
+		unsigned long a6;
+	} state;
+};
+
+/**
+ * __arm_smccc_smc() - make SMC calls
  * @a0-a7: arguments passed in registers 0 to 7
  * @res: result values from registers 0 to 3
+ * @quirk: points to an arm_smccc_quirk, or NULL when no quirks are required.
  *
  * This function is used to make SMC calls following SMC Calling Convention.
  * The content of the supplied param are copied to registers 0 to 7 prior
  * to the SMC instruction. The return values are updated with the content
- * from register 0 to 3 on return from the SMC instruction.
+ * from register 0 to 3 on return from the SMC instruction.  An optional
+ * quirk structure provides vendor specific behavior.
  */
-asmlinkage void arm_smccc_smc(unsigned long a0, unsigned long a1,
+asmlinkage void __arm_smccc_smc(unsigned long a0, unsigned long a1,
 			unsigned long a2, unsigned long a3, unsigned long a4,
 			unsigned long a5, unsigned long a6, unsigned long a7,
-			struct arm_smccc_res *res);
+			struct arm_smccc_res *res, struct arm_smccc_quirk *quirk);
 
 /**
- * arm_smccc_hvc() - make HVC calls
+ * __arm_smccc_hvc() - make HVC calls
  * @a0-a7: arguments passed in registers 0 to 7
  * @res: result values from registers 0 to 3
  *
  * This function is used to make HVC calls following SMC Calling
  * Convention.  The content of the supplied param are copied to registers 0
  * to 7 prior to the HVC instruction. The return values are updated with
- * the content from register 0 to 3 on return from the HVC instruction.
+ * the content from register 0 to 3 on return from the HVC instruction.  An
+ * optional quirk structure provides vendor specific behavior.
  */
-asmlinkage void arm_smccc_hvc(unsigned long a0, unsigned long a1,
+asmlinkage void __arm_smccc_hvc(unsigned long a0, unsigned long a1,
 			unsigned long a2, unsigned long a3, unsigned long a4,
 			unsigned long a5, unsigned long a6, unsigned long a7,
-			struct arm_smccc_res *res);
+			struct arm_smccc_res *res, struct arm_smccc_quirk *quirk);
+
+#define arm_smccc_smc(...) __arm_smccc_smc(__VA_ARGS__, NULL)
+
+#define arm_smccc_smc_quirk(...) __arm_smccc_smc(__VA_ARGS__)
+
+#define arm_smccc_hvc(...) __arm_smccc_hvc(__VA_ARGS__, NULL)
+
+#define arm_smccc_hvc_quirk(...) __arm_smccc_hvc(__VA_ARGS__)
 
 #endif /*__LINUX_ARM_SMCCC_H*/

[PATCH 4.9 136/152] firmware: qcom: scm: Fix interrupted SCM calls

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Gross <andy.gross@linaro.org>

[ Upstream commit 82bcd087029f6056506ea929f11af02622230901 ]

This patch adds a Qualcomm specific quirk to the arm_smccc_smc call.

On Qualcomm ARM64 platforms, the SMC call can return before it has
completed.  If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.

The quirk stores off the session ID from the interrupted call in the
quirk structure so that it can be used by the caller.

This patch folds in a fix given by Sricharan R:
https://lkml.org/lkml/2016/9/28/272

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/smccc-call.S |    9 ++++++++-
 drivers/firmware/qcom_scm-64.c |   13 ++++++++++---
 include/linux/arm-smccc.h      |   11 ++++++++---
 3 files changed, 26 insertions(+), 7 deletions(-)

--- a/arch/arm64/kernel/smccc-call.S
+++ b/arch/arm64/kernel/smccc-call.S
@@ -12,6 +12,7 @@
  *
  */
 #include <linux/linkage.h>
+#include <linux/arm-smccc.h>
 #include <asm/asm-offsets.h>
 
 	.macro SMCCC instr
@@ -20,7 +21,13 @@
 	ldr	x4, [sp]
 	stp	x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
 	stp	x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
-	ret
+	ldr	x4, [sp, #8]
+	cbz	x4, 1f /* no quirk structure */
+	ldr	x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
+	cmp	x9, #ARM_SMCCC_QUIRK_QCOM_A6
+	b.ne	1f
+	str	x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
+1:	ret
 	.cfi_endproc
 	.endm
 
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -91,6 +91,7 @@ static int qcom_scm_call(struct device *
 	dma_addr_t args_phys = 0;
 	void *args_virt = NULL;
 	size_t alloc_len;
+	struct arm_smccc_quirk quirk = {.id = ARM_SMCCC_QUIRK_QCOM_A6};
 
 	if (unlikely(arglen > N_REGISTER_ARGS)) {
 		alloc_len = N_EXT_QCOM_SCM_ARGS * sizeof(u64);
@@ -131,10 +132,16 @@ static int qcom_scm_call(struct device *
 					 qcom_smccc_convention,
 					 ARM_SMCCC_OWNER_SIP, fn_id);
 
+		quirk.state.a6 = 0;
+
 		do {
-			arm_smccc_smc(cmd, desc->arginfo, desc->args[0],
-				      desc->args[1], desc->args[2], x5, 0, 0,
-				      res);
+			arm_smccc_smc_quirk(cmd, desc->arginfo, desc->args[0],
+				      desc->args[1], desc->args[2], x5,
+				      quirk.state.a6, 0, res, &quirk);
+
+			if (res->a0 == QCOM_SCM_INTERRUPTED)
+				cmd = res->a0;
+
 		} while (res->a0 == QCOM_SCM_INTERRUPTED);
 
 		mutex_unlock(&qcom_scm_lock);
--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -14,9 +14,6 @@
 #ifndef __LINUX_ARM_SMCCC_H
 #define __LINUX_ARM_SMCCC_H
 
-#include <linux/linkage.h>
-#include <linux/types.h>
-
 /*
  * This file provides common defines for ARM SMC Calling Convention as
  * specified in
@@ -60,6 +57,13 @@
 #define ARM_SMCCC_OWNER_TRUSTED_OS	50
 #define ARM_SMCCC_OWNER_TRUSTED_OS_END	63
 
+#define ARM_SMCCC_QUIRK_NONE		0
+#define ARM_SMCCC_QUIRK_QCOM_A6		1 /* Save/restore register a6 */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/types.h>
 /**
  * struct arm_smccc_res - Result from SMC/HVC call
  * @a0-a3 result values from registers 0 to 3
@@ -125,4 +129,5 @@ asmlinkage void __arm_smccc_hvc(unsigned
 
 #define arm_smccc_hvc_quirk(...) __arm_smccc_hvc(__VA_ARGS__)
 
+#endif /*__ASSEMBLY__*/
 #endif /*__LINUX_ARM_SMCCC_H*/

[PATCH 4.9 137/152] drm/msm/adreno: move function declarations to header file

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Baoyou Xie <baoyou.xie@linaro.org>

[ Upstream commit a5725ab0497ad91a2df7c01a78bf1a0cc5be4526 ]

We get 2 warnings when building kernel with W=1:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:535:17: warning: no previous prototype for 'a3xx_gpu_init' [-Wmissing-prototypes]
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:624:17: warning: no previous prototype for 'a4xx_gpu_init' [-Wmissing-prototypes]

In fact, both functions are declared in
drivers/gpu/drm/msm/adreno/adreno_device.c, but should be declared
in a header file. So this patch moves both function declarations to
drivers/gpu/drm/msm/adreno/adreno_gpu.h.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477127865-9381-1-git-send-email-baoyou.xie@linaro.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/adreno/adreno_device.c |    3 ---
 drivers/gpu/drm/msm/adreno/adreno_gpu.h    |    3 +++
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/msm/adreno/adreno_device.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_device.c
@@ -25,9 +25,6 @@ bool hang_debug = false;
 MODULE_PARM_DESC(hang_debug, "Dump registers when hang is detected (can be slow!)");
 module_param_named(hang_debug, hang_debug, bool, 0600);
 
-struct msm_gpu *a3xx_gpu_init(struct drm_device *dev);
-struct msm_gpu *a4xx_gpu_init(struct drm_device *dev);
-
 static const struct adreno_info gpulist[] = {
 	{
 		.rev   = ADRENO_REV(3, 0, 5, ANY_ID),
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h
@@ -311,4 +311,7 @@ static inline void adreno_gpu_write(stru
 		gpu_write(&gpu->base, reg - 1, data);
 }
 
+struct msm_gpu *a3xx_gpu_init(struct drm_device *dev);
+struct msm_gpu *a4xx_gpu_init(struct drm_device *dev);
+
 #endif /* __ADRENO_GPU_H__ */

[PATCH 4.9 138/152] ARM: smccc: Update HVC comment to describe new quirk parameter

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Will Deacon <will.deacon@arm.com>

[ Upstream commit 3046ec674d441562c6bb3e4284cd866743042ef3 ]

Commit 680a0873e193 ("arm: kernel: Add SMC structure parameter") added
a new "quirk" parameter to the SMC and HVC SMCCC backends, but only
updated the comment for the SMC version. This patch adds the new
paramater to the comment describing the HVC version too.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/arm-smccc.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/arm-smccc.h
+++ b/include/linux/arm-smccc.h
@@ -109,6 +109,7 @@ asmlinkage void __arm_smccc_smc(unsigned
  * __arm_smccc_hvc() - make HVC calls
  * @a0-a7: arguments passed in registers 0 to 7
  * @res: result values from registers 0 to 3
+ * @quirk: points to an arm_smccc_quirk, or NULL when no quirks are required.
  *
  * This function is used to make HVC calls following SMC Calling
  * Convention.  The content of the supplied param are copied to registers 0

[PATCH 4.9 139/152] PCI: Add Broadcom Northstar2 PAXC quirk for device class and MPSS

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jon Mason <jon.mason@broadcom.com>

[ Upstream commit ce709f86501a013e941e9986cb072eae375ddf3e ]

The Broadcom Northstar2 SoC has a number of quirks for the PAXC
(internal/fake) PCI bus.  Specifically, the PCI config space is shared
between the root port and the first PF (ie., PF0), and a number of fields
are tied to zero (thus preventing them from being set).  These cannot be
"fixed" in device firmware, so we must fix them with a quirk.

Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2240,6 +2240,27 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_B
 			 PCI_DEVICE_ID_TIGON3_5719,
 			 quirk_brcm_5719_limit_mrrs);
 
+#ifdef CONFIG_PCIE_IPROC_PLATFORM
+static void quirk_paxc_bridge(struct pci_dev *pdev)
+{
+	/* The PCI config space is shared with the PAXC root port and the first
+	 * Ethernet device.  So, we need to workaround this by telling the PCI
+	 * code that the bridge is not an Ethernet device.
+	 */
+	if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+		pdev->class = PCI_CLASS_BRIDGE_PCI << 8;
+
+	/* MPSS is not being set properly (as it is currently 0).  This is
+	 * because that area of the PCI config space is hard coded to zero, and
+	 * is not modifiable by firmware.  Set this to 2 (e.g., 512 byte MPS)
+	 * so that the MPS can be set to the real max value.
+	 */
+	pdev->pcie_mpss = 2;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge);
+#endif
+
 /* Originally in EDAC sources for i82875P:
  * Intel tells BIOS developers to hide device 6 which
  * configures the overflow device access containing

[PATCH 4.9 140/152] PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dongdong Liu <liudongdong3@huawei.com>

[ Upstream commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 ]

The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it
cannot generate MSIs.  It can transfer MSI/MSI-X from downstream devices,
but does not support MSI/MSI-X itself.

Add a quirk to prevent use of MSI/MSI-X by the Root Port.

[bhelgaas: changelog, sort vendor ID #define, drop device ID #define]
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c    |    1 +
 include/linux/pci_ids.h |    2 ++
 2 files changed, 3 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1634,6 +1634,7 @@ static void quirk_pcie_mch(struct pci_de
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7520_MCH,	quirk_pcie_mch);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7320_MCH,	quirk_pcie_mch);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7525_MCH,	quirk_pcie_mch);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI,	0x1610,	quirk_pcie_mch);
 
 
 /*
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2513,6 +2513,8 @@
 #define PCI_DEVICE_ID_KORENIX_JETCARDF2	0x1700
 #define PCI_DEVICE_ID_KORENIX_JETCARDF3	0x17ff
 
+#define PCI_VENDOR_ID_HUAWEI         	0x19e5
+
 #define PCI_VENDOR_ID_NETRONOME		0x19ee
 #define PCI_DEVICE_ID_NETRONOME_NFP3200	0x3200
 #define PCI_DEVICE_ID_NETRONOME_NFP3240	0x3240

[PATCH 4.9 141/152] mmc: sdhci-of-esdhc: remove default broken-cd for ARM

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: yangbo lu <yangbo.lu@nxp.com>

[ Upstream commit e9acc77dd046b22c7ebf70e35f68968978445f8b ]

Initially all QorIQ platforms were PowerPC architecture and they didn't
support card detection except several platforms. The driver added the
quirk SDHCI_QUIRK_BROKEN_CARD_DETECTION as default and this made broken-cd
property in dts node didn't work. Now QorIQ platform turns to ARM
architecture and most of them could support card detection. However it's
a large number of dts trees that need to be fixed with broken-cd if we
remove the default SDHCI_QUIRK_BROKEN_CARD_DETECTION in driver. And the
users don't want to see this. So this patch is to remove this default
quirk just for ARM and keep it for PowerPC.(Note, QorIQ PowerPC platform
only has big-endian eSDHC while QorIQ ARM platform has big-endian or
little-endian eSDHC) This makes broken-cd property work again for ARM.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-of-esdhc.c |   18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -559,16 +559,19 @@ static const struct sdhci_ops sdhci_esdh
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_be_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
-		| SDHCI_QUIRK_NO_CARD_NO_RESET
-		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.quirks = ESDHC_DEFAULT_QUIRKS |
+#ifdef CONFIG_PPC
+		  SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+#endif
+		  SDHCI_QUIRK_NO_CARD_NO_RESET |
+		  SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.ops = &sdhci_esdhc_be_ops,
 };
 
 static const struct sdhci_pltfm_data sdhci_esdhc_le_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
-		| SDHCI_QUIRK_NO_CARD_NO_RESET
-		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.quirks = ESDHC_DEFAULT_QUIRKS |
+		  SDHCI_QUIRK_NO_CARD_NO_RESET |
+		  SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.ops = &sdhci_esdhc_le_ops,
 };
 
@@ -623,8 +626,7 @@ static int sdhci_esdhc_probe(struct plat
 	    of_device_is_compatible(np, "fsl,p5020-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p4080-esdhc") ||
 	    of_device_is_compatible(np, "fsl,p1020-esdhc") ||
-	    of_device_is_compatible(np, "fsl,t1040-esdhc") ||
-	    of_device_is_compatible(np, "fsl,ls1021a-esdhc"))
+	    of_device_is_compatible(np, "fsl,t1040-esdhc"))
 		host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 
 	if (of_device_is_compatible(np, "fsl,ls1021a-esdhc"))

[PATCH 4.9 142/152] PCI: Sort the list of devices with D3 delay quirk by ID

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit cd3e2eb8905d14fe28a2fc75362b8ecec16f0fb6 ]

Sort the list of Intel devices that have no PCI D3 delay by ID.  Add a
comment for group of devices that had not been marked yet.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |   26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3136,30 +3136,32 @@ static void quirk_remove_d3_delay(struct
 {
 	dev->d3_delay = 0;
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay);
+/* C600 Series devices do not need 10ms d3_delay */
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay);
+/* Lynxpoint-H PCH devices do not need 10ms d3_delay */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay);
 /* Intel Cherrytrail devices do not need 10ms d3_delay */
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay);
 
 /*
  * Some devices may pass our check in pci_intx_mask_supported() if

[PATCH 4.9 143/152] PCI: Add ACS quirk for Qualcomm QDF2400 and QDF2432

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sinan Kaya <okaya@codeaurora.org>

[ Upstream commit 33be632b8443b6ac74aa293504f430604fb9abeb ]

The Qualcomm QDF2xxx root ports don't advertise an ACS capability, but they
do provide ACS-like features to disable peer transactions and validate bus
numbers in requests.

To be specific:
* Hardware supports source validation but it will report the issue as
Completer Abort instead of ACS Violation.

* Hardware doesn't support peer-to-peer and each root port is a root
complex with unique segment numbers.

* It is not possible for one root port to pass traffic to the other root
port.  All PCIe transactions are terminated inside the root port.

Add an ACS quirk for the QDF2400 and QDF2432 products.

[bhelgaas: changelog]
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pci/quirks.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4161,6 +4161,26 @@ static int pci_quirk_intel_pch_acs(struc
 }
 
 /*
+ * These QCOM root ports do provide ACS-like features to disable peer
+ * transactions and validate bus numbers in requests, but do not provide an
+ * actual PCIe ACS capability.  Hardware supports source validation but it
+ * will report the issue as Completer Abort instead of ACS Violation.
+ * Hardware doesn't support peer-to-peer and each root port is a root
+ * complex with unique segment numbers.  It is not possible for one root
+ * port to pass traffic to another root port.  All PCIe transactions are
+ * terminated inside the root port.
+ */
+static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
+{
+	u16 flags = (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV);
+	int ret = acs_flags & ~flags ? 0 : 1;
+
+	dev_info(&dev->dev, "Using QCOM ACS Quirk (%d)\n", ret);
+
+	return ret;
+}
+
+/*
  * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in
  * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2,
  * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and
@@ -4316,6 +4336,9 @@ static const struct pci_dev_acs_enabled
 	/* I219 */
 	{ PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs },
+	/* QCOM QDF2xxx root ports */
+	{ 0x17cb, 0x400, pci_quirk_qcom_rp_acs },
+	{ 0x17cb, 0x401, pci_quirk_qcom_rp_acs },
 	/* Intel PCH root ports */
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs },

[PATCH 4.9 144/152] watchdog: s3c2410: Fix infinite interrupt in soft mode

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 0b445549ea6f91ffea78a976fe89b932db6e077a ]

In soft (no-reboot) mode, the driver self-pings watchdog upon expiration
of an interrupt.  However the interrupt itself was not cleared thus on
first hit, the system enters infinite interrupt handling loop.

On Odroid U3 (Exynos4412), when booted with s3c2410_wdt.soft_noboot=1
argument the console is flooded:
	# killall -9 watchdog
	[   60.523760] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq)
	[   60.536744] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq)

Fix this by writing something to the WTCLRINT register to clear the
interrupt.  The register WTCLRINT however appeared in S3C6410 so a new
watchdog quirk and flavor are needed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/devicetree/bindings/watchdog/samsung-wdt.txt |    9 +++--
 drivers/watchdog/s3c2410_wdt.c                             |   21 +++++++++++--
 2 files changed, 23 insertions(+), 7 deletions(-)

--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -6,10 +6,11 @@ occurred.
 
 Required properties:
 - compatible : should be one among the following
-	(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
-	(b) "samsung,exynos5250-wdt" for Exynos5250
-	(c) "samsung,exynos5420-wdt" for Exynos5420
-	(c) "samsung,exynos7-wdt" for Exynos7
+	- "samsung,s3c2410-wdt" for S3C2410
+	- "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4
+	- "samsung,exynos5250-wdt" for Exynos5250
+	- "samsung,exynos5420-wdt" for Exynos5420
+	- "samsung,exynos7-wdt" for Exynos7
 
 - reg : base physical address of the controller and length of memory mapped
 	region.
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -46,6 +46,7 @@
 #define S3C2410_WTCON		0x00
 #define S3C2410_WTDAT		0x04
 #define S3C2410_WTCNT		0x08
+#define S3C2410_WTCLRINT	0x0c
 
 #define S3C2410_WTCNT_MAXCNT	0xffff
 
@@ -72,6 +73,7 @@
 #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET	0x040c
 #define QUIRK_HAS_PMU_CONFIG			(1 << 0)
 #define QUIRK_HAS_RST_STAT			(1 << 1)
+#define QUIRK_HAS_WTCLRINT_REG			(1 << 2)
 
 /* These quirks require that we have a PMU register map */
 #define QUIRKS_HAVE_PMUREG			(QUIRK_HAS_PMU_CONFIG | \
@@ -143,13 +145,18 @@ static const struct s3c2410_wdt_variant
 };
 
 #ifdef CONFIG_OF
+static const struct s3c2410_wdt_variant drv_data_s3c6410 = {
+	.quirks = QUIRK_HAS_WTCLRINT_REG,
+};
+
 static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
 	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
 	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
 	.mask_bit = 20,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 20,
-	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
+	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
+		  | QUIRK_HAS_WTCLRINT_REG,
 };
 
 static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
@@ -158,7 +165,8 @@ static const struct s3c2410_wdt_variant
 	.mask_bit = 0,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 9,
-	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
+	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
+		  | QUIRK_HAS_WTCLRINT_REG,
 };
 
 static const struct s3c2410_wdt_variant drv_data_exynos7 = {
@@ -167,12 +175,15 @@ static const struct s3c2410_wdt_variant
 	.mask_bit = 23,
 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
 	.rst_stat_bit = 23,	/* A57 WDTRESET */
-	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
+	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
+		  | QUIRK_HAS_WTCLRINT_REG,
 };
 
 static const struct of_device_id s3c2410_wdt_match[] = {
 	{ .compatible = "samsung,s3c2410-wdt",
 	  .data = &drv_data_s3c2410 },
+	{ .compatible = "samsung,s3c6410-wdt",
+	  .data = &drv_data_s3c6410 },
 	{ .compatible = "samsung,exynos5250-wdt",
 	  .data = &drv_data_exynos5250 },
 	{ .compatible = "samsung,exynos5420-wdt",
@@ -418,6 +429,10 @@ static irqreturn_t s3c2410wdt_irq(int ir
 	dev_info(wdt->dev, "watchdog timer expired (irq)\n");
 
 	s3c2410wdt_keepalive(&wdt->wdt_device);
+
+	if (wdt->drv_data->quirks & QUIRK_HAS_WTCLRINT_REG)
+		writel(0x1, wdt->reg_base + S3C2410_WTCLRINT);
+
 	return IRQ_HANDLED;
 }
 

[PATCH 4.9 145/152] platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Chuan Hsieh <kai.chiuan@gmail.com>

[ Upstream commit 8023eff10e7b0327898f17f0b553d2e45c71cef3 ]

The bluetooth adapter Atheros AR3012 can't be enumerated
and make the bluetooth function broken.

T:  Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3362 Rev=00.02
S:  Manufacturer=Atheros Communications
S:  Product=Bluetooth USB Host Controller
S:  SerialNumber=Alaska Day 2006
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

The error is:

 usb 2-6: device not accepting address 7, error -62
 usb usb2-port6: unable to enumerate USB device

It is caused by adapter's connected port is mapped to xHC
controller, but the xHCI is not supported by the usb device.

The output of 'sudo lspci -nnxxx -s 00:14.0':

 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04)
 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00
 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00
 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20
 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00
 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00
 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00
 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00
 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00
 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00
 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00
 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00
 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00
 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00

By referencing Intel Platform Controller Hub(PCH) datasheet,
the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h
decides the setting of mapping the port to EHCI controller or
xHC controller. And the port mapped to xHC will enable xHCI
during bus resume.

The setting of disabling bluetooth adapter's connected port is
0x000001D9. The value can be obtained by few times 1 bit flip
operation. The suited configuration should have the 'lsusb -t'
result with bluetooth using ehci:

/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M
    |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M
    |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
        |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
        |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M

Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[andy: resolve merge conflict in asus-wmi.h]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/platform/x86/asus-nb-wmi.c |   13 +++++++++++++
 drivers/platform/x86/asus-wmi.c    |   29 +++++++++++++++++++++++++++++
 drivers/platform/x86/asus-wmi.h    |    1 +
 3 files changed, 43 insertions(+)

--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -116,6 +116,10 @@ static struct quirk_entry quirk_asus_ux3
 	.wmi_backlight_native = true,
 };
 
+static struct quirk_entry quirk_asus_x550lb = {
+	.xusb2pr = 0x01D9,
+};
+
 static int dmi_matched(const struct dmi_system_id *dmi)
 {
 	quirks = dmi->driver_data;
@@ -407,6 +411,15 @@ static const struct dmi_system_id asus_q
 		},
 		.driver_data = &quirk_asus_ux303ub,
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "ASUSTeK COMPUTER INC. X550LB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X550LB"),
+		},
+		.driver_data = &quirk_asus_x550lb,
+	},
 	{},
 };
 
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -156,6 +156,9 @@ MODULE_LICENSE("GPL");
 #define ASUS_FAN_CTRL_MANUAL		1
 #define ASUS_FAN_CTRL_AUTO		2
 
+#define USB_INTEL_XUSB2PR		0xD0
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
+
 struct bios_args {
 	u32 arg0;
 	u32 arg1;
@@ -1080,6 +1083,29 @@ exit:
 	return result;
 }
 
+static void asus_wmi_set_xusb2pr(struct asus_wmi *asus)
+{
+	struct pci_dev *xhci_pdev;
+	u32 orig_ports_available;
+	u32 ports_available = asus->driver->quirks->xusb2pr;
+
+	xhci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI,
+			NULL);
+
+	if (!xhci_pdev)
+		return;
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+				&orig_ports_available);
+
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+				cpu_to_le32(ports_available));
+
+	pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n",
+			orig_ports_available, ports_available);
+}
+
 /*
  * Hwmon device
  */
@@ -2087,6 +2113,9 @@ static int asus_wmi_add(struct platform_
 	if (asus->driver->quirks->wmi_backlight_native)
 		acpi_video_set_dmi_backlight_type(acpi_backlight_native);
 
+	if (asus->driver->quirks->xusb2pr)
+		asus_wmi_set_xusb2pr(asus);
+
 	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
 		err = asus_wmi_backlight_init(asus);
 		if (err && err != -ENODEV)
--- a/drivers/platform/x86/asus-wmi.h
+++ b/drivers/platform/x86/asus-wmi.h
@@ -53,6 +53,7 @@ struct quirk_entry {
 	 * and let the ACPI interrupt to send out the key event.
 	 */
 	int no_display_toggle;
+	u32 xusb2pr;
 
 	bool (*i8042_filter)(unsigned char data, unsigned char str,
 			     struct serio *serio);

[PATCH 4.9 147/152] tools/power turbostat: decode Baytrail CC6 and MC6 demotion configuration

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Len Brown <len.brown@intel.com>

[ Upstream commit 71616c8e936a6dd541f0627d7bf4ff09971d8ccb ]

with --debug, see:

cpu0: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x00000000 (DISable-CC6-Demotion)
cpu0: MSR_MC6_DEMOTION_POLICY_CONFIG: 0x00000000 (DISable-MC6-Demotion)

Note that the hardware default is to enable demotion,
and Linux started clearing these registers in 3.17.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/power/x86/turbostat/turbostat.c |   42 ++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -2951,6 +2951,27 @@ int has_snb_msrs(unsigned int family, un
 }
 
 /*
+ * SLV client has supporet for unique MSRs:
+ *
+ * MSR_CC6_DEMOTION_POLICY_CONFIG
+ * MSR_MC6_DEMOTION_POLICY_CONFIG
+ */
+
+int has_slv_msrs(unsigned int family, unsigned int model)
+{
+	if (!genuine_intel)
+		return 0;
+
+	switch (model) {
+	case INTEL_FAM6_ATOM_SILVERMONT1:
+	case INTEL_FAM6_ATOM_MERRIFIELD:
+	case INTEL_FAM6_ATOM_MOOREFIELD:
+		return 1;
+	}
+	return 0;
+}
+
+/*
  * HSW adds support for additional MSRs:
  *
  * MSR_PKG_C8_RESIDENCY		0x00000630
@@ -3179,6 +3200,24 @@ void decode_misc_pwr_mgmt_msr(void)
 			msr & (1 << 0) ? "DIS" : "EN",
 			msr & (1 << 1) ? "EN" : "DIS");
 }
+/*
+ * Decode MSR_CC6_DEMOTION_POLICY_CONFIG, MSR_MC6_DEMOTION_POLICY_CONFIG
+ *
+ * This MSRs are present on Silvermont processors,
+ * Intel Atom processor E3000 series (Baytrail), and friends.
+ */
+void decode_c6_demotion_policy_msr(void)
+{
+	unsigned long long msr;
+
+	if (!get_msr(base_cpu, MSR_CC6_DEMOTION_POLICY_CONFIG, &msr))
+		fprintf(outf, "cpu%d: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-CC6-Demotion)\n",
+			base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS");
+
+	if (!get_msr(base_cpu, MSR_MC6_DEMOTION_POLICY_CONFIG, &msr))
+		fprintf(outf, "cpu%d: MSR_MC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-MC6-Demotion)\n",
+			base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS");
+}
 
 void process_cpuid()
 {
@@ -3360,6 +3399,9 @@ void process_cpuid()
 	if (debug)
 		decode_misc_pwr_mgmt_msr();
 
+	if (debug && has_slv_msrs(family, model))
+		decode_c6_demotion_policy_msr();
+
 	rapl_probe(family, model);
 	perf_limit_reasons_probe(family, model);
 

[PATCH 4.9 148/152] tools/power turbostat: dump Atom P-states correctly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Len Brown <len.brown@intel.com>

[ Upstream commit 0f7887c49b0c454aef9936a6eadabe1c91b5af55 ]

Turbostat dumps MSR_TURBO_RATIO_LIMIT on Core Architecture.
But Atom Architecture uses MSR_ATOM_CORE_RATIOS and
MSR_ATOM_CORE_TURBO_RATIOS.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/power/x86/turbostat/turbostat.c |  103 +++++++++++++++++++++++++++-------
 1 file changed, 82 insertions(+), 21 deletions(-)

--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -1470,6 +1470,54 @@ dump_nhm_turbo_ratio_limits(void)
 }
 
 static void
+dump_atom_turbo_ratio_limits(void)
+{
+	unsigned long long msr;
+	unsigned int ratio;
+
+	get_msr(base_cpu, MSR_ATOM_CORE_RATIOS, &msr);
+	fprintf(outf, "cpu%d: MSR_ATOM_CORE_RATIOS: 0x%08llx\n", base_cpu, msr & 0xFFFFFFFF);
+
+	ratio = (msr >> 0) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz minimum operating frequency\n",
+			ratio, bclk, ratio * bclk);
+
+	ratio = (msr >> 8) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz low frequency mode (LFM)\n",
+			ratio, bclk, ratio * bclk);
+
+	ratio = (msr >> 16) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz base frequency\n",
+			ratio, bclk, ratio * bclk);
+
+	get_msr(base_cpu, MSR_ATOM_CORE_TURBO_RATIOS, &msr);
+	fprintf(outf, "cpu%d: MSR_ATOM_CORE_TURBO_RATIOS: 0x%08llx\n", base_cpu, msr & 0xFFFFFFFF);
+
+	ratio = (msr >> 24) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz max turbo 4 active cores\n",
+			ratio, bclk, ratio * bclk);
+
+	ratio = (msr >> 16) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz max turbo 3 active cores\n",
+			ratio, bclk, ratio * bclk);
+
+	ratio = (msr >> 8) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz max turbo 2 active cores\n",
+			ratio, bclk, ratio * bclk);
+
+	ratio = (msr >> 0) & 0x3F;
+	if (ratio)
+		fprintf(outf, "%d * %.1f = %.1f MHz max turbo 1 active core\n",
+			ratio, bclk, ratio * bclk);
+}
+
+static void
 dump_knl_turbo_ratio_limits(void)
 {
 	const unsigned int buckets_no = 7;
@@ -2230,8 +2278,32 @@ int probe_nhm_msrs(unsigned int family,
 	has_base_hz = 1;
 	return 1;
 }
+/*
+ * SLV client has supporet for unique MSRs:
+ *
+ * MSR_CC6_DEMOTION_POLICY_CONFIG
+ * MSR_MC6_DEMOTION_POLICY_CONFIG
+ */
+
+int has_slv_msrs(unsigned int family, unsigned int model)
+{
+	if (!genuine_intel)
+		return 0;
+
+	switch (model) {
+	case INTEL_FAM6_ATOM_SILVERMONT1:
+	case INTEL_FAM6_ATOM_MERRIFIELD:
+	case INTEL_FAM6_ATOM_MOOREFIELD:
+		return 1;
+	}
+	return 0;
+}
+
 int has_nhm_turbo_ratio_limit(unsigned int family, unsigned int model)
 {
+	if (has_slv_msrs(family, model))
+		return 0;
+
 	switch (model) {
 	/* Nehalem compatible, but do not include turbo-ratio limit support */
 	case 0x2E:	/* Nehalem-EX Xeon - Beckton */
@@ -2242,6 +2314,13 @@ int has_nhm_turbo_ratio_limit(unsigned i
 		return 1;
 	}
 }
+int has_atom_turbo_ratio_limit(unsigned int family, unsigned int model)
+{
+	if (has_slv_msrs(family, model))
+		return 1;
+
+	return 0;
+}
 int has_ivt_turbo_ratio_limit(unsigned int family, unsigned int model)
 {
 	if (!genuine_intel)
@@ -2337,6 +2416,9 @@ dump_cstate_pstate_config_info(unsigned
 	if (has_nhm_turbo_ratio_limit(family, model))
 		dump_nhm_turbo_ratio_limits();
 
+	if (has_atom_turbo_ratio_limit(family, model))
+		dump_atom_turbo_ratio_limits();
+
 	if (has_knl_turbo_ratio_limit(family, model))
 		dump_knl_turbo_ratio_limits();
 
@@ -2948,27 +3030,6 @@ int has_snb_msrs(unsigned int family, un
 		return 1;
 	}
 	return 0;
-}
-
-/*
- * SLV client has supporet for unique MSRs:
- *
- * MSR_CC6_DEMOTION_POLICY_CONFIG
- * MSR_MC6_DEMOTION_POLICY_CONFIG
- */
-
-int has_slv_msrs(unsigned int family, unsigned int model)
-{
-	if (!genuine_intel)
-		return 0;
-
-	switch (model) {
-	case INTEL_FAM6_ATOM_SILVERMONT1:
-	case INTEL_FAM6_ATOM_MERRIFIELD:
-	case INTEL_FAM6_ATOM_MOOREFIELD:
-		return 1;
-	}
-	return 0;
 }
 
 /*

[PATCH 4.9 149/152] x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matjaz Hegedic <matjaz.hegedic@gmail.com>

[ Upstream commit 90b28ded88dda8bea82b4a86923e73ba0746d884 ]

Without the parameter reboot=a, ASUS EeeBook X205TA will hang when it should reboot.

This adds the appropriate quirk, thus fixing the problem.

Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/reboot.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -223,6 +223,14 @@ static struct dmi_system_id __initdata r
 			DMI_MATCH(DMI_BOARD_NAME, "P4S800"),
 		},
 	},
+	{	/* Handle problems with rebooting on ASUS EeeBook X205TA */
+		.callback = set_acpi_reboot,
+		.ident = "ASUS EeeBook X205TA",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X205TAW"),
+		},
+	},
 
 	/* Certec */
 	{       /* Handle problems with rebooting on Certec BPC600 */

[PATCH 4.9 150/152] x86/reboot/quirks: Add ASUS EeeBook X205TA/W reboot quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matjaz Hegedic <matjaz.hegedic@gmail.com>

[ Upstream commit 3b3e78552d3077ec70d2640e629e07e3ab416a6a ]

Without the parameter reboot=a, ASUS EeeBook X205TA/W will hang
when it should reboot. This adds the appropriate quirk, thus
fixing the problem.

Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Link: http://lkml.kernel.org/r/1488737804-20681-1-git-send-email-matjaz.hegedic@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/reboot.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -231,6 +231,14 @@ static struct dmi_system_id __initdata r
 			DMI_MATCH(DMI_PRODUCT_NAME, "X205TAW"),
 		},
 	},
+	{	/* Handle problems with rebooting on ASUS EeeBook X205TAW */
+		.callback = set_acpi_reboot,
+		.ident = "ASUS EeeBook X205TAW",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X205TAW"),
+		},
+	},
 
 	/* Certec */
 	{       /* Handle problems with rebooting on Certec BPC600 */

[PATCH 4.9 151/152] usb-storage: Add ignore-residue quirk for Initio INIC-3619

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>

[ Upstream commit d595259fbb7a7afed241b1afb2c4fe4b47de47fa ]

This USB-SATA bridge chip is used in a StarTech enclosure for
optical drives.

Without the quirk MakeMKV fails during the key exchange with an
installed BluRay drive:
> Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED'
> occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:2'

Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2071,6 +2071,20 @@ UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/*
+ * Reported by Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
+ * The INIC-3619 bridge is used in the StarTech SLSODDU33B
+ * SATA-USB enclosure for slimline optical drives.
+ *
+ * The quirk enables MakeMKV to properly exchange keys with
+ * an installed BD drive.
+ */
+UNUSUAL_DEV(  0x13fd, 0x3609, 0x0209, 0x0209,
+		"Initio Corporation",
+		"INIC-3619",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Qinglin Ye <yestyle@gmail.com> */
 UNUSUAL_DEV(  0x13fe, 0x3600, 0x0100, 0x0100,
 		"Kingston",

[PATCH 4.9 152/152] x86/reboot/quirks: Fix typo in ASUS EeeBook X205TA reboot quirk

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matjaz Hegedic <matjaz.hegedic@gmail.com>

[ Upstream commit bba8376aea1dcbbe22bbda118c52abee317c7609 ]

The reboot quirk for ASUS EeeBook X205TA contains a typo in
DMI_PRODUCT_NAME, improperly referring to X205TAW instead of
X205TA, which prevents the quirk from being triggered. The
model X205TAW already has a reboot quirk of its own.

This fix simply removes the inappropriate final letter W.

Fixes: 90b28ded88dd ("x86/reboot/quirks: Add ASUS EeeBook X205TA reboot quirk")
Signed-off-by: Matjaz Hegedic <matjaz.hegedic@gmail.com>
Link: http://lkml.kernel.org/r/1489064417-7445-1-git-send-email-matjaz.hegedic@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/reboot.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -228,7 +228,7 @@ static struct dmi_system_id __initdata r
 		.ident = "ASUS EeeBook X205TA",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X205TAW"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X205TA"),
 		},
 	},
 	{	/* Handle problems with rebooting on ASUS EeeBook X205TAW */

Re: [PATCH 4.9 112/152] Input: gpio_keys - add support for GPIO descriptors

[Dmitry Torokhov]

On Mon, Apr 10, 2017 at 9:42 AM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> 4.9-stable review patch.  If anyone has any objections, please let me know.

Confused why it needs to be in stable as there should be no chnage in
behavior. Is it because there are other patches depending on this one?

>
> ------------------
>
> From: Geert Uytterhoeven <geert+renesas@glider.be>
>
> [ Upstream commit 5feeca3c1e39c01f9ef5abc94dea94021ccf94fc ]
>
> GPIO descriptors are the preferred way over legacy GPIO numbers
> nowadays. Convert the driver to use GPIO descriptors internally but
> still allow passing legacy GPIO numbers from platform data to support
> existing platforms.
>
> Based on commits 633a21d80b4a2cd6 ("input: gpio_keys_polled: Add support
> for GPIO descriptors") and 1ae5ddb6f8837558 ("Input: gpio_keys_polled -
> request GPIO pin as input.").
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/input/keyboard/gpio_keys.c |   37 ++++++++++++++++++++++++++-----------
>  1 file changed, 26 insertions(+), 11 deletions(-)
>
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -26,6 +26,7 @@
>  #include <linux/gpio_keys.h>
>  #include <linux/workqueue.h>
>  #include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/of.h>
>  #include <linux/of_platform.h>
>  #include <linux/of_gpio.h>
> @@ -35,6 +36,7 @@
>  struct gpio_button_data {
>         const struct gpio_keys_button *button;
>         struct input_dev *input;
> +       struct gpio_desc *gpiod;
>
>         struct timer_list release_timer;
>         unsigned int release_delay;     /* in msecs, for IRQ-only buttons */
> @@ -140,7 +142,7 @@ static void gpio_keys_disable_button(str
>                  */
>                 disable_irq(bdata->irq);
>
> -               if (gpio_is_valid(bdata->button->gpio))
> +               if (bdata->gpiod)
>                         cancel_delayed_work_sync(&bdata->work);
>                 else
>                         del_timer_sync(&bdata->release_timer);
> @@ -358,19 +360,20 @@ static void gpio_keys_gpio_report_event(
>         const struct gpio_keys_button *button = bdata->button;
>         struct input_dev *input = bdata->input;
>         unsigned int type = button->type ?: EV_KEY;
> -       int state = gpio_get_value_cansleep(button->gpio);
> +       int state;
>
> +       state = gpiod_get_value_cansleep(bdata->gpiod);
>         if (state < 0) {
> -               dev_err(input->dev.parent, "failed to get gpio state\n");
> +               dev_err(input->dev.parent,
> +                       "failed to get gpio state: %d\n", state);
>                 return;
>         }
>
> -       state = (state ? 1 : 0) ^ button->active_low;
>         if (type == EV_ABS) {
>                 if (state)
>                         input_event(input, type, button->code, button->value);
>         } else {
> -               input_event(input, type, button->code, !!state);
> +               input_event(input, type, button->code, state);
>         }
>         input_sync(input);
>  }
> @@ -456,7 +459,7 @@ static void gpio_keys_quiesce_key(void *
>  {
>         struct gpio_button_data *bdata = data;
>
> -       if (gpio_is_valid(bdata->button->gpio))
> +       if (bdata->gpiod)
>                 cancel_delayed_work_sync(&bdata->work);
>         else
>                 del_timer_sync(&bdata->release_timer);
> @@ -478,18 +481,30 @@ static int gpio_keys_setup_key(struct pl
>         bdata->button = button;
>         spin_lock_init(&bdata->lock);
>
> +       /*
> +        * Legacy GPIO number, so request the GPIO here and
> +        * convert it to descriptor.
> +        */
>         if (gpio_is_valid(button->gpio)) {
> +               unsigned flags = GPIOF_IN;
> +
> +               if (button->active_low)
> +                       flags |= GPIOF_ACTIVE_LOW;
>
> -               error = devm_gpio_request_one(&pdev->dev, button->gpio,
> -                                             GPIOF_IN, desc);
> +               error = devm_gpio_request_one(&pdev->dev, button->gpio, flags,
> +                                             desc);
>                 if (error < 0) {
>                         dev_err(dev, "Failed to request GPIO %d, error %d\n",
>                                 button->gpio, error);
>                         return error;
>                 }
>
> +               bdata->gpiod = gpio_to_desc(button->gpio);
> +               if (!bdata->gpiod)
> +                       return -EINVAL;
> +
>                 if (button->debounce_interval) {
> -                       error = gpio_set_debounce(button->gpio,
> +                       error = gpiod_set_debounce(bdata->gpiod,
>                                         button->debounce_interval * 1000);
>                         /* use timer if gpiolib doesn't provide debounce */
>                         if (error < 0)
> @@ -500,7 +515,7 @@ static int gpio_keys_setup_key(struct pl
>                 if (button->irq) {
>                         bdata->irq = button->irq;
>                 } else {
> -                       irq = gpio_to_irq(button->gpio);
> +                       irq = gpiod_to_irq(bdata->gpiod);
>                         if (irq < 0) {
>                                 error = irq;
>                                 dev_err(dev,
> @@ -575,7 +590,7 @@ static void gpio_keys_report_state(struc
>
>         for (i = 0; i < ddata->pdata->nbuttons; i++) {
>                 struct gpio_button_data *bdata = &ddata->data[i];
> -               if (gpio_is_valid(bdata->button->gpio))
> +               if (bdata->gpiod)
>                         gpio_keys_gpio_report_event(bdata);
>         }
>         input_sync(input);
>
>



-- 
Dmitry

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Shuah Khan]

On 04/10/2017 10:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.22 release.
> There are 152 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Guenter Roeck]

On 04/10/2017 09:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.22 release.
> There are 152 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> Anything received after that time might be too late.
>

Early feedback:


Building arm64:allmodconfig ... failed
--------------
Error log:
arch/arm64/Makefile:23: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum
arch/arm64/Makefile:36: LSE atomics not supported by binutils
/opt/buildbot/slave/stable-queue-4.9/build/arch/arm64/kernel/pci.c: In function ‘pci_acpi_setup_ecam_mapping’:
/opt/buildbot/slave/stable-queue-4.9/build/arch/arm64/kernel/pci.c:139:9: error: implicit declaration of function ‘acpi_resource_consumer’ [-Werror=implicit-function-declaration]
   adev = acpi_resource_consumer(&cfgres);
          ^
/opt/buildbot/slave/stable-queue-4.9/build/arch/arm64/kernel/pci.c:139:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
   adev = acpi_resource_consumer(&cfgres);
        ^
cc1: some warnings being treated as errors
make[2]: *** [arch/arm64/kernel/pci.o] Error 1
make[1]: *** [arch/arm64/kernel] Error 2
make[1]: *** Waiting for unfinished jobs....
/opt/buildbot/slave/stable-queue-4.9/build/drivers/pci/host/pcie-hisi.c: In function ‘hisi_pcie_init’:
/opt/buildbot/slave/stable-queue-4.9/build/drivers/pci/host/pcie-hisi.c:94:8: error: implicit declaration of function ‘acpi_get_rc_resources’ [-Werror=implicit-function-declaration]
   ret = acpi_get_rc_resources(dev, "HISI0081", root->segment, res);
         ^
cc1: some warnings being treated as errors
make[4]: *** [drivers/pci/host/pcie-hisi.o] Error 1

Culprits:

166fba287313 PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller
575fdb4e21ec arm64: PCI: Search ACPI namespace to ensure ECAM space is reserved
6fe2dc79c28d PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers

You will also need

00710984eac5 ACPI: Add acpi_resource_consumer() to find device that claims a resource
169de969c018 PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platform

to fix the errors.

Guenter

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Andre Tomt]

On 10. april 2017 18:40, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.22 release.
> There are 152 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Like in 4.10.10-rc1, turbostat is no longer building. In addition to the 
same missing commit, 4.9.22-rc1 has one more issue.

71616c8e936a6dd541f0627d7bf4ff09971d8ccb "tools/power turbostat: decode 
Baytrail CC6 and MC6 demotion configuration" depends on a big deal of 
the turbostat changes in 4.10 due to needing 
869ce69e1e8ae7e6fa4a1a90887e5f94eac653eb "tools/power turbostat: use 
intel-family.h model strings" which in turn needs a bunch of other 
commits to apply.

Seems simple enough to make a more targeted backport using the pre-"use 
intel-family.h model strings" style magic values.

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Guenter Roeck]

On 04/10/2017 09:40 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.22 release.
> There are 152 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> Anything received after that time might be too late.
>

Build results:
	total: 149 pass: 146 fail: 3
Failed builds:
	arm:allmodconfig
	arm:omap2plus_defconfig
	arm64:allmodconfig

Qemu test results:
	total: 122 pass: 103 fail: 19
Failed tests:
	arm:beagle:multi_v7_defconfig:omap3-beagle
	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
	arm:overo:multi_v7_defconfig:omap3-overo-tobi
	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
	arm:midway:multi_v7_defconfig:ecx-2000
	arm:smdkc210:multi_v7_defconfig:exynos4210-smdkv310
	arm:beagle:omap2plus_defconfig:omap3-beagle
	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
	arm:overo:omap2plus_defconfig:omap3-overo-tobi
	arm64:virt:smp:defconfig
	arm64:xlnx-ep108:smp:defconfig:zynqmp-ep108
	arm64:virt:nosmp:defconfig
	arm64:xlnx-ep108:nosmp:defconfig:zynqmp-ep108

As reported earlier, the arm64 builds fail with

Building arm64:virt:nosmp:defconfig ... failed
------------
Error log:
arch/arm64/Makefile:23: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum
arch/arm64/kernel/pci.c: In function ‘pci_acpi_setup_ecam_mapping’:
arch/arm64/kernel/pci.c:139:9: error: implicit declaration of function ‘acpi_resource_consumer’
   adev = acpi_resource_consumer(&cfgres);
...
drivers/pci/host/pcie-hisi.c: In function ‘hisi_pcie_init’:
drivers/pci/host/pcie-hisi.c:94:8: error: implicit declaration of function ‘acpi_get_rc_resources’

---

The arm builds fail as follows.

Building arm:overo:omap2plus_defconfig:omap3-overo-tobi ... failed
------------
Error log:
In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
arch/arm/mach-omap2/pdata-quirks.c:537:49: error: 'rx51_ir_data' undeclared here (not in a function)
   OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
                                                  ^
./include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
     .platform_data = _pdata }
                      ^
make[1]: *** [arch/arm/mach-omap2/pdata-quirks.o] Error 1

I am a bit lost here. Reverting

f2ea7a5c3730 rx51: broken build

fixes the problem, but is supposed to accomplish the opposite. You'll need to drop
that patch, or maybe even better drop

375a81645446 ARM: OMAP2+: Fix init for multiple quirks for the same SoC

as well and let the authors [copied] sort this out.

Anyway, details are as always available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

On Mon, Apr 10, 2017 at 03:55:12PM -0700, Guenter Roeck wrote:
> On 04/10/2017 09:40 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.22 release.
> > There are 152 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> Early feedback:
> 
> 
> Building arm64:allmodconfig ... failed
> --------------
> Error log:
> arch/arm64/Makefile:23: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum
> arch/arm64/Makefile:36: LSE atomics not supported by binutils
> /opt/buildbot/slave/stable-queue-4.9/build/arch/arm64/kernel/pci.c: In function ‘pci_acpi_setup_ecam_mapping’:
> /opt/buildbot/slave/stable-queue-4.9/build/arch/arm64/kernel/pci.c:139:9: error: implicit declaration of function ‘acpi_resource_consumer’ [-Werror=implicit-function-declaration]
>   adev = acpi_resource_consumer(&cfgres);
>          ^
> /opt/buildbot/slave/stable-queue-4.9/build/arch/arm64/kernel/pci.c:139:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
>   adev = acpi_resource_consumer(&cfgres);
>        ^
> cc1: some warnings being treated as errors
> make[2]: *** [arch/arm64/kernel/pci.o] Error 1
> make[1]: *** [arch/arm64/kernel] Error 2
> make[1]: *** Waiting for unfinished jobs....
> /opt/buildbot/slave/stable-queue-4.9/build/drivers/pci/host/pcie-hisi.c: In function ‘hisi_pcie_init’:
> /opt/buildbot/slave/stable-queue-4.9/build/drivers/pci/host/pcie-hisi.c:94:8: error: implicit declaration of function ‘acpi_get_rc_resources’ [-Werror=implicit-function-declaration]
>   ret = acpi_get_rc_resources(dev, "HISI0081", root->segment, res);
>         ^
> cc1: some warnings being treated as errors
> make[4]: *** [drivers/pci/host/pcie-hisi.o] Error 1
> 
> Culprits:
> 
> 166fba287313 PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller
> 575fdb4e21ec arm64: PCI: Search ACPI namespace to ensure ECAM space is reserved
> 6fe2dc79c28d PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers
> 
> You will also need
> 
> 00710984eac5 ACPI: Add acpi_resource_consumer() to find device that claims a resource
> 169de969c018 PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platform
> 
> to fix the errors.

No, that's a mess, I'm dropping those original patches, and others that
depended on them.  Thanks for letting me know.

greg k-h

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

On Mon, Apr 10, 2017 at 08:07:17PM -0700, Guenter Roeck wrote:
> On 04/10/2017 09:40 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.22 release.
> > There are 152 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 149 pass: 146 fail: 3
> Failed builds:
> 	arm:allmodconfig
> 	arm:omap2plus_defconfig
> 	arm64:allmodconfig
> 
> Qemu test results:
> 	total: 122 pass: 103 fail: 19
> Failed tests:
> 	arm:beagle:multi_v7_defconfig:omap3-beagle
> 	arm:beaglexm:multi_v7_defconfig:omap3-beagle-xm
> 	arm:overo:multi_v7_defconfig:omap3-overo-tobi
> 	arm:sabrelite:multi_v7_defconfig:imx6dl-sabrelite
> 	arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
> 	arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
> 	arm:vexpress-a15-a7:multi_v7_defconfig:vexpress-v2p-ca15_a7
> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc702
> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zc706
> 	arm:xilinx-zynq-a9:multi_v7_defconfig:zynq-zed
> 	arm:midway:multi_v7_defconfig:ecx-2000
> 	arm:smdkc210:multi_v7_defconfig:exynos4210-smdkv310
> 	arm:beagle:omap2plus_defconfig:omap3-beagle
> 	arm:beaglexm:omap2plus_defconfig:omap3-beagle-xm
> 	arm:overo:omap2plus_defconfig:omap3-overo-tobi
> 	arm64:virt:smp:defconfig
> 	arm64:xlnx-ep108:smp:defconfig:zynqmp-ep108
> 	arm64:virt:nosmp:defconfig
> 	arm64:xlnx-ep108:nosmp:defconfig:zynqmp-ep108
> 
> As reported earlier, the arm64 builds fail with
> 
> Building arm64:virt:nosmp:defconfig ... failed
> ------------
> Error log:
> arch/arm64/Makefile:23: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum
> arch/arm64/kernel/pci.c: In function ‘pci_acpi_setup_ecam_mapping’:
> arch/arm64/kernel/pci.c:139:9: error: implicit declaration of function ‘acpi_resource_consumer’
>   adev = acpi_resource_consumer(&cfgres);
> ...
> drivers/pci/host/pcie-hisi.c: In function ‘hisi_pcie_init’:
> drivers/pci/host/pcie-hisi.c:94:8: error: implicit declaration of function ‘acpi_get_rc_resources’
> 
> ---
> 
> The arm builds fail as follows.
> 
> Building arm:overo:omap2plus_defconfig:omap3-overo-tobi ... failed
> ------------
> Error log:
> In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
> arch/arm/mach-omap2/pdata-quirks.c:537:49: error: 'rx51_ir_data' undeclared here (not in a function)
>   OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
>                                                  ^
> ./include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
>     .platform_data = _pdata }
>                      ^
> make[1]: *** [arch/arm/mach-omap2/pdata-quirks.o] Error 1
> 
> I am a bit lost here. Reverting
> 
> f2ea7a5c3730 rx51: broken build
> 
> fixes the problem, but is supposed to accomplish the opposite. You'll need to drop
> that patch, or maybe even better drop
> 
> 375a81645446 ARM: OMAP2+: Fix init for multiple quirks for the same SoC
> 
> as well and let the authors [copied] sort this out.

Good idea, both now dropped, thanks.

greg k-h

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

On Tue, Apr 11, 2017 at 03:56:33AM +0200, Andre Tomt wrote:
> On 10. april 2017 18:40, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.9.22 release.
> > There are 152 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> 
> Like in 4.10.10-rc1, turbostat is no longer building. In addition to the
> same missing commit, 4.9.22-rc1 has one more issue.
> 
> 71616c8e936a6dd541f0627d7bf4ff09971d8ccb "tools/power turbostat: decode
> Baytrail CC6 and MC6 demotion configuration" depends on a big deal of the
> turbostat changes in 4.10 due to needing
> 869ce69e1e8ae7e6fa4a1a90887e5f94eac653eb "tools/power turbostat: use
> intel-family.h model strings" which in turn needs a bunch of other commits
> to apply.
> 
> Seems simple enough to make a more targeted backport using the pre-"use
> intel-family.h model strings" style magic values.

Ick, no, that's a total mess.  I'm going to drop all of these now from
4.9 and 4.10 as it's obvious Sasha never tried to build them :(

thanks,

greg k-h

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

On Mon, Apr 10, 2017 at 06:40:52PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.22 release.
> There are 152 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.

And I made a -rc2 here as well, due to the build issues:

        kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc2.gz
or:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y

thanks,

greg k-h

Re: [PATCH 4.9 115/152] ARM: davinci: add skeleton for pdata-quirks

[Sekhar Nori]

On Monday 10 April 2017 10:12 PM, Greg Kroah-Hartman wrote:
> 4.9-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Kevin Hilman <khilman@baylibre.com>
> 
> [ Upstream commit 9c9b1bc25291e275b04f758f2549c81e092954f5 ]
> 
> Add skeleton pdata-quirks for davinci.
> 
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> [nsekhar@ti.com: move changes to build pdata-quirks.c and call
> 		 to pdata_quirks_init() to this patch]
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This does not add any useful feature or bug fix on its own. I don't
think it should be backported to stable.

Thanks,
Sekhar

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Guenter Roeck]

On 04/10/2017 10:03 PM, Greg Kroah-Hartman wrote:
> On Mon, Apr 10, 2017 at 06:40:52PM +0200, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 4.9.22 release.
>> There are 152 patches in this series, all will be posted as a response
>> to this one.  If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc1.gz
>> or in the git tree and branch at:
>>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
>> and the diffstat can be found below.
>
> And I made a -rc2 here as well, due to the build issues:
>
>         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc2.gz
> or:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
>

Both 4.9 and 4.10 are now clean; no more build (or qemu) errors.

Thanks,
Guenter

Re: [PATCH 4.9 115/152] ARM: davinci: add skeleton for pdata-quirks

[Greg Kroah-Hartman]

On Tue, Apr 11, 2017 at 12:11:53PM +0530, Sekhar Nori wrote:
> On Monday 10 April 2017 10:12 PM, Greg Kroah-Hartman wrote:
> > 4.9-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Kevin Hilman <khilman@baylibre.com>
> > 
> > [ Upstream commit 9c9b1bc25291e275b04f758f2549c81e092954f5 ]
> > 
> > Add skeleton pdata-quirks for davinci.
> > 
> > Signed-off-by: Kevin Hilman <khilman@baylibre.com>
> > [nsekhar@ti.com: move changes to build pdata-quirks.c and call
> > 		 to pdata_quirks_init() to this patch]
> > Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> > Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> This does not add any useful feature or bug fix on its own. I don't
> think it should be backported to stable.

Yeah, that's really odd.  It doesn't seem to do anything in Linus's tree
either...

I'll drop it from the stable trees queues now, thanks.

greg k-h

Re: [PATCH 4.9 096/152] HID: microsoft: Add Surface 4 type cover pro 4 not JP versions

[Greg Kroah-Hartman]

On Tue, Apr 11, 2017 at 10:32:13AM +0200, Daniel Keller wrote:
> I think this commit is not necessary since commit 8fe89ef076fa1 ("HID:
> multitouch: enable the Surface 3 Type Cover to report multitouch data")
> the TypeCover can be properly handled without the patch and you have the commit
> in your stable tree.
> 
> Or you adding the commit 66e5c5ffc7a5e4d36d136ce4fd8bdb4e92ecec7b "HID:
> multitouch: enable Surface 4 Type Cover Pro (non-JP) to report multitouch data"
> from the 4.11 kernel which revert my patch.
> 
> The commit 0a76ac80e84d0be0aba24ab60ac3bc14bc49bbc9 "HID: multitouch: enable
> Surface 3 Type Cover Pro to report multitouch data" doing the same for the
> other TypeCover devices.

Ok, this is a mess, I've dropped these from the 4.9 and 4.10 stable
queues, thanks.

Sasha, if you think these are still needed, can you please sort it out?

thanks,

greg k-h

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

On Tue, Apr 11, 2017 at 05:48:36AM -0700, Guenter Roeck wrote:
> On 04/10/2017 10:03 PM, Greg Kroah-Hartman wrote:
> > On Mon, Apr 10, 2017 at 06:40:52PM +0200, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.9.22 release.
> > > There are 152 patches in this series, all will be posted as a response
> > > to this one.  If anyone has any issues with these being applied, please
> > > let me know.
> > > 
> > > Responses should be made by Wed Apr 12 16:41:34 UTC 2017.
> > > Anything received after that time might be too late.
> > > 
> > > The whole patch series can be found in one patch at:
> > > 	kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc1.gz
> > > or in the git tree and branch at:
> > >   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > > and the diffstat can be found below.
> > 
> > And I made a -rc2 here as well, due to the build issues:
> > 
> >         kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.22-rc2.gz
> > or:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> > 
> 
> Both 4.9 and 4.10 are now clean; no more build (or qemu) errors.

Yeah!  thanks for letting me know.

greg k-h

Re: [PATCH 4.9 115/152] ARM: davinci: add skeleton for pdata-quirks

[Sekhar Nori]

On Tuesday 11 April 2017 08:02 PM, Greg Kroah-Hartman wrote:
> On Tue, Apr 11, 2017 at 12:11:53PM +0530, Sekhar Nori wrote:
>> On Monday 10 April 2017 10:12 PM, Greg Kroah-Hartman wrote:
>>> 4.9-stable review patch.  If anyone has any objections, please let me know.
>>>
>>> ------------------
>>>
>>> From: Kevin Hilman <khilman@baylibre.com>
>>>
>>> [ Upstream commit 9c9b1bc25291e275b04f758f2549c81e092954f5 ]
>>>
>>> Add skeleton pdata-quirks for davinci.
>>>
>>> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
>>> [nsekhar@ti.com: move changes to build pdata-quirks.c and call
>>> 		 to pdata_quirks_init() to this patch]
>>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>>> Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
>>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>
>> This does not add any useful feature or bug fix on its own. I don't
>> think it should be backported to stable.
> 
> Yeah, that's really odd.  It doesn't seem to do anything in Linus's tree
> either...

We have built on top for this for v4.12 kernel. Those patches are
present in latest linux-next.

> I'll drop it from the stable trees queues now, thanks.

Thanks!

Regards,
Sekhar

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Tony Lindgren]

* Greg Kroah-Hartman <gregkh@linuxfoundation.org> [170410 21:45]:
> On Mon, Apr 10, 2017 at 08:07:17PM -0700, Guenter Roeck wrote:
> > The arm builds fail as follows.
> > 
> > Building arm:overo:omap2plus_defconfig:omap3-overo-tobi ... failed
> > ------------
> > Error log:
> > In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
> > arch/arm/mach-omap2/pdata-quirks.c:537:49: error: 'rx51_ir_data' undeclared here (not in a function)
> >   OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
> >                                                  ^
> > ./include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
> >     .platform_data = _pdata }
> >                      ^
> > make[1]: *** [arch/arm/mach-omap2/pdata-quirks.o] Error 1
> > 
> > I am a bit lost here. Reverting
> > 
> > f2ea7a5c3730 rx51: broken build
> > 
> > fixes the problem, but is supposed to accomplish the opposite. You'll need to drop
> > that patch, or maybe even better drop

Just trying to understand what's going on.. OK so dropping the patch
above makes sense. It seems there's some other dependency not mentioned
there.

> > 375a81645446 ARM: OMAP2+: Fix init for multiple quirks for the same SoC
> > 
> > as well and let the authors [copied] sort this out.

Guenter, what's your reasoning to also drop this one? I don't quite see
the connection between these two patches?

> Good idea, both now dropped, thanks.

Fine with me, the second one can always be revisited as needed.

Regards,

Tony

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Guenter Roeck]

On 04/11/2017 08:17 AM, Tony Lindgren wrote:
> * Greg Kroah-Hartman <gregkh@linuxfoundation.org> [170410 21:45]:
>> On Mon, Apr 10, 2017 at 08:07:17PM -0700, Guenter Roeck wrote:
>>> The arm builds fail as follows.
>>>
>>> Building arm:overo:omap2plus_defconfig:omap3-overo-tobi ... failed
>>> ------------
>>> Error log:
>>> In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
>>> arch/arm/mach-omap2/pdata-quirks.c:537:49: error: 'rx51_ir_data' undeclared here (not in a function)
>>>   OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
>>>                                                  ^
>>> ./include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
>>>     .platform_data = _pdata }
>>>                      ^
>>> make[1]: *** [arch/arm/mach-omap2/pdata-quirks.o] Error 1
>>>
>>> I am a bit lost here. Reverting
>>>
>>> f2ea7a5c3730 rx51: broken build
>>>
>>> fixes the problem, but is supposed to accomplish the opposite. You'll need to drop
>>> that patch, or maybe even better drop
>
> Just trying to understand what's going on.. OK so dropping the patch
> above makes sense. It seems there's some other dependency not mentioned
> there.
>
>>> 375a81645446 ARM: OMAP2+: Fix init for multiple quirks for the same SoC
>>>
>>> as well and let the authors [copied] sort this out.
>
> Guenter, what's your reasoning to also drop this one? I don't quite see
> the connection between these two patches?
>

Somehow I thought they are related, but right now I have no idea why I thought that.
Maybe I didn't have enough coffee :-(.

Guenter

Re: [PATCH 4.9 000/152] 4.9.22-stable review

[Greg Kroah-Hartman]

On Tue, Apr 11, 2017 at 06:40:30PM -0700, Guenter Roeck wrote:
> On 04/11/2017 08:17 AM, Tony Lindgren wrote:
> > * Greg Kroah-Hartman <gregkh@linuxfoundation.org> [170410 21:45]:
> > > On Mon, Apr 10, 2017 at 08:07:17PM -0700, Guenter Roeck wrote:
> > > > The arm builds fail as follows.
> > > > 
> > > > Building arm:overo:omap2plus_defconfig:omap3-overo-tobi ... failed
> > > > ------------
> > > > Error log:
> > > > In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0:
> > > > arch/arm/mach-omap2/pdata-quirks.c:537:49: error: 'rx51_ir_data' undeclared here (not in a function)
> > > >   OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_ir_data),
> > > >                                                  ^
> > > > ./include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA'
> > > >     .platform_data = _pdata }
> > > >                      ^
> > > > make[1]: *** [arch/arm/mach-omap2/pdata-quirks.o] Error 1
> > > > 
> > > > I am a bit lost here. Reverting
> > > > 
> > > > f2ea7a5c3730 rx51: broken build
> > > > 
> > > > fixes the problem, but is supposed to accomplish the opposite. You'll need to drop
> > > > that patch, or maybe even better drop
> > 
> > Just trying to understand what's going on.. OK so dropping the patch
> > above makes sense. It seems there's some other dependency not mentioned
> > there.
> > 
> > > > 375a81645446 ARM: OMAP2+: Fix init for multiple quirks for the same SoC
> > > > 
> > > > as well and let the authors [copied] sort this out.
> > 
> > Guenter, what's your reasoning to also drop this one? I don't quite see
> > the connection between these two patches?
> > 
> 
> Somehow I thought they are related, but right now I have no idea why I thought that.
> Maybe I didn't have enough coffee :-(.

I'm frustrated enough at this mess that it's not a big deal to drop
them, if Sasha feels they are really needed, we can re-add them later :)

thanks,

greg k-h