[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Oleksij Rempel]

This patch series is providing power off support for Freescale/NXP iMX6 based
boards with external power management integrated circuit (PMIC).

changes:
v6:
 - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
 - fix "MPIC_STBY_REQ" typo in the comment.

v5:
 - remove useless includes from pm-imx6.c patch
 - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
   patch

v4:
 - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
   patch
 - add Acked-by to "ARM: imx6q: provide documentation for new ..."
   patch

v3:
 - set pm_power_off_prepare = NULL on .remove.
 - documentation and spelling fixes.
 - use %pf instead of lookup_symbol_name.

Oleksij Rempel (6):
  ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
    property
  ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
    is set
  kernel/reboot.c: export pm_power_off_prepare
  regulator: pfuze100: add fsl,pmic-stby-poweroff property
  regulator: pfuze100-regulator: provide pm_power_off_prepare handler
  ARM: dts: imx6: RIoTboard provide standby on power off option

 .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
 .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
 arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
 arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
 drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
 kernel/reboot.c                                    |  1 +
 6 files changed, 138 insertions(+)

-- 
2.11.0

[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Oleksij Rempel]

This patch series is providing power off support for Freescale/NXP iMX6 based
boards with external power management integrated circuit (PMIC).

changes:
v6:
 - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
 - fix "MPIC_STBY_REQ" typo in the comment.

v5:
 - remove useless includes from pm-imx6.c patch
 - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
   patch

v4:
 - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
   patch
 - add Acked-by to "ARM: imx6q: provide documentation for new ..."
   patch

v3:
 - set pm_power_off_prepare = NULL on .remove.
 - documentation and spelling fixes.
 - use %pf instead of lookup_symbol_name.

Oleksij Rempel (6):
  ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
    property
  ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
    is set
  kernel/reboot.c: export pm_power_off_prepare
  regulator: pfuze100: add fsl,pmic-stby-poweroff property
  regulator: pfuze100-regulator: provide pm_power_off_prepare handler
  ARM: dts: imx6: RIoTboard provide standby on power off option

 .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
 .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
 arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
 arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
 drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
 kernel/reboot.c                                    |  1 +
 6 files changed, 138 insertions(+)

-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Oleksij Rempel]

This patch series is providing power off support for Freescale/NXP iMX6 based
boards with external power management integrated circuit (PMIC).

changes:
v6:
 - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
 - fix "MPIC_STBY_REQ" typo in the comment.

v5:
 - remove useless includes from pm-imx6.c patch
 - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
   patch

v4:
 - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
   patch
 - add Acked-by to "ARM: imx6q: provide documentation for new ..."
   patch

v3:
 - set pm_power_off_prepare = NULL on .remove.
 - documentation and spelling fixes.
 - use %pf instead of lookup_symbol_name.

Oleksij Rempel (6):
  ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
    property
  ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
    is set
  kernel/reboot.c: export pm_power_off_prepare
  regulator: pfuze100: add fsl,pmic-stby-poweroff property
  regulator: pfuze100-regulator: provide pm_power_off_prepare handler
  ARM: dts: imx6: RIoTboard provide standby on power off option

 .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
 .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
 arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
 arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
 drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
 kernel/reboot.c                                    |  1 +
 6 files changed, 138 insertions(+)

-- 
2.11.0

[PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff property

[Oleksij Rempel]

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0e..8f93e1503e59 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
 - interrupts: Should contain CCM interrupt
 - #clock-cells: Should be <1>
 
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+  on power off.
+  Use this property if the SoC should be powered off by external power
+  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+  be using "syscon-poweroff" driver instead.
+
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
 for the full list of i.MX6 Quad and DualLite clock IDs.
-- 
2.11.0

[PATCH v6 1/6] ARM: imx6q: provide documentation for new fsl, pmic-stby-poweroff property

[Oleksij Rempel]

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/clock/imx6q-clock.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 9252912a5b0e..8f93e1503e59 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -6,6 +6,14 @@ Required properties:
 - interrupts: Should contain CCM interrupt
 - #clock-cells: Should be <1>
 
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+  on power off.
+  Use this property if the SoC should be powered off by external power
+  management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+  Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+  be using "syscon-poweroff" driver instead.
+
 The clock consumer should specify the desired clock by having the clock
 ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
 for the full list of i.MX6 Quad and DualLite clock IDs.
-- 
2.11.0

[PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set

[Oleksij Rempel]

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index e61b1d1027e1..0f141caa71f6 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -602,6 +602,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_suspend(0, imx6q_suspend_finish);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -618,6 +640,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.11.0

[PATCH v6 2/6] ARM: imx6: register pm_power_off handler if "fsl, pmic-stby-poweroff" is set

[Oleksij Rempel]

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index e61b1d1027e1..0f141caa71f6 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -602,6 +602,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	cpu_suspend(0, imx6q_suspend_finish);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -618,6 +640,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.11.0

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

[PATCH v6 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property

[Oleksij Rempel]

Document the new optional "fsl,pmic-stby-poweroff" property.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 444c47831a40..197f1a52e960 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@ Required properties:
 - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
 - reg: I2C slave address
 
+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+  Use this option if the SoC should be powered off by external power
+  management IC (PMIC) on PMIC_STBY_REQ signal.
+  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator
   initialization data for defined regulators. Please refer to below doc
-- 
2.11.0

[PATCH v6 4/6] regulator: pfuze100: add fsl,pmic-stby-poweroff property

[Oleksij Rempel]

Document the new optional "fsl,pmic-stby-poweroff" property.

Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 444c47831a40..197f1a52e960 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@ Required properties:
 - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
 - reg: I2C slave address
 
+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+  Use this option if the SoC should be powered off by external power
+  management IC (PMIC) on PMIC_STBY_REQ signal.
+  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator
   initialization data for defined regulators. Please refer to below doc
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 4/6] regulator: pfuze100: add fsl, pmic-stby-poweroff property

[Oleksij Rempel]

Document the new optional "fsl,pmic-stby-poweroff" property.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/regulator/pfuze100.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 444c47831a40..197f1a52e960 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -4,6 +4,13 @@ Required properties:
 - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000"
 - reg: I2C slave address
 
+Optional properties:
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+  Use this option if the SoC should be powered off by external power
+  management IC (PMIC) on PMIC_STBY_REQ signal.
+  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
+
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator
   initialization data for defined regulators. Please refer to below doc
-- 
2.11.0

[PATCH v6 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler

[Oleksij Rempel]

On some boards the SoC can use one pin "PMIC_STBY_REQ" to notify th PMIC
about state changes. In this case internal state of PMIC must be
preconfigured for upcomming state change.
It works fine with the current regulator framework, except with the
power-off case.

This patch is providing an optional pm_power_off_prepare handler
which will configure standby state of the PMIC to disable all power lines.

In my power consumption test on RIoTBoard, I got the following results:
power off without this patch:	320 mA
power off with this patch:	2   mA
suspend to ram:			40  mA

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/regulator/pfuze100-regulator.c | 92 ++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 63922a2167e5..f6c276ed91d8 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/pfuze100.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/kallsyms.h>
 #include <linux/regmap.h>
 
 #define PFUZE_NUMREGS		128
@@ -42,11 +43,17 @@
 
 #define PFUZE100_COINVOL	0x1a
 #define PFUZE100_SW1ABVOL	0x20
+#define PFUZE100_SW1ABMODE	0x23
 #define PFUZE100_SW1CVOL	0x2e
+#define PFUZE100_SW1CMODE	0x31
 #define PFUZE100_SW2VOL		0x35
+#define PFUZE100_SW2MODE	0x38
 #define PFUZE100_SW3AVOL	0x3c
+#define PFUZE100_SW3AMODE	0x3f
 #define PFUZE100_SW3BVOL	0x43
+#define PFUZE100_SW3BMODE	0x46
 #define PFUZE100_SW4VOL		0x4a
+#define PFUZE100_SW4MODE	0x4d
 #define PFUZE100_SWBSTCON1	0x66
 #define PFUZE100_VREFDDRCON	0x6a
 #define PFUZE100_VSNVSVOL	0x6b
@@ -57,6 +64,13 @@
 #define PFUZE100_VGEN5VOL	0x70
 #define PFUZE100_VGEN6VOL	0x71
 
+#define PFUZE100_SWxMODE_MASK	0xf
+#define PFUZE100_SWxMODE_APS_APS	0x8
+#define PFUZE100_SWxMODE_APS_OFF	0x4
+
+#define PFUZE100_VGENxLPWR	BIT(6)
+#define PFUZE100_VGENxSTBY	BIT(5)
+
 enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
 
 struct pfuze_regulator {
@@ -489,6 +503,69 @@ static inline struct device_node *match_of_node(int index)
 }
 #endif
 
+static struct pfuze_chip *syspm_pfuze_chip;
+
+static void pfuze_power_off_prepare(void)
+{
+	dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power off");
+
+	/* Switch from default mode: APS/APS to APS/Off */
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+}
+
+static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
+{
+	if (pfuze_chip->chip_id != PFUZE100) {
+		dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
+		return -ENODEV;
+	}
+
+	if (pm_power_off_prepare) {
+		dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already registered.\n");
+		return -EBUSY;
+	}
+
+	if (syspm_pfuze_chip) {
+		dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
+		return -EBUSY;
+	}
+
+	syspm_pfuze_chip = pfuze_chip;
+	pm_power_off_prepare = pfuze_power_off_prepare;
+
+	return 0;
+}
+
 static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 {
 	unsigned int value;
@@ -659,6 +736,20 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		}
 	}
 
+	if (of_property_read_bool(client->dev.of_node,
+				  "fsl,pmic-stby-poweroff"))
+		return pfuze_power_off_prepare_init(pfuze_chip);
+
+	return 0;
+}
+
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+	if (syspm_pfuze_chip) {
+		syspm_pfuze_chip = NULL;
+		pm_power_off_prepare = NULL;
+	}
+
 	return 0;
 }
 
@@ -669,6 +760,7 @@ static struct i2c_driver pfuze_driver = {
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
+	.remove = pfuze100_regulator_remove,
 };
 module_i2c_driver(pfuze_driver);
 
-- 
2.11.0

[PATCH v6 5/6] regulator: pfuze100-regulator: provide pm_power_off_prepare handler

[Oleksij Rempel]

On some boards the SoC can use one pin "PMIC_STBY_REQ" to notify th PMIC
about state changes. In this case internal state of PMIC must be
preconfigured for upcomming state change.
It works fine with the current regulator framework, except with the
power-off case.

This patch is providing an optional pm_power_off_prepare handler
which will configure standby state of the PMIC to disable all power lines.

In my power consumption test on RIoTBoard, I got the following results:
power off without this patch:	320 mA
power off with this patch:	2   mA
suspend to ram:			40  mA

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/regulator/pfuze100-regulator.c | 92 ++++++++++++++++++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 63922a2167e5..f6c276ed91d8 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -28,6 +28,7 @@
 #include <linux/regulator/pfuze100.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/kallsyms.h>
 #include <linux/regmap.h>
 
 #define PFUZE_NUMREGS		128
@@ -42,11 +43,17 @@
 
 #define PFUZE100_COINVOL	0x1a
 #define PFUZE100_SW1ABVOL	0x20
+#define PFUZE100_SW1ABMODE	0x23
 #define PFUZE100_SW1CVOL	0x2e
+#define PFUZE100_SW1CMODE	0x31
 #define PFUZE100_SW2VOL		0x35
+#define PFUZE100_SW2MODE	0x38
 #define PFUZE100_SW3AVOL	0x3c
+#define PFUZE100_SW3AMODE	0x3f
 #define PFUZE100_SW3BVOL	0x43
+#define PFUZE100_SW3BMODE	0x46
 #define PFUZE100_SW4VOL		0x4a
+#define PFUZE100_SW4MODE	0x4d
 #define PFUZE100_SWBSTCON1	0x66
 #define PFUZE100_VREFDDRCON	0x6a
 #define PFUZE100_VSNVSVOL	0x6b
@@ -57,6 +64,13 @@
 #define PFUZE100_VGEN5VOL	0x70
 #define PFUZE100_VGEN6VOL	0x71
 
+#define PFUZE100_SWxMODE_MASK	0xf
+#define PFUZE100_SWxMODE_APS_APS	0x8
+#define PFUZE100_SWxMODE_APS_OFF	0x4
+
+#define PFUZE100_VGENxLPWR	BIT(6)
+#define PFUZE100_VGENxSTBY	BIT(5)
+
 enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 };
 
 struct pfuze_regulator {
@@ -489,6 +503,69 @@ static inline struct device_node *match_of_node(int index)
 }
 #endif
 
+static struct pfuze_chip *syspm_pfuze_chip;
+
+static void pfuze_power_off_prepare(void)
+{
+	dev_info(syspm_pfuze_chip->dev, "Configure standy mode for power off");
+
+	/* Switch from default mode: APS/APS to APS/Off */
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+}
+
+static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
+{
+	if (pfuze_chip->chip_id != PFUZE100) {
+		dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
+		return -ENODEV;
+	}
+
+	if (pm_power_off_prepare) {
+		dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already registered.\n");
+		return -EBUSY;
+	}
+
+	if (syspm_pfuze_chip) {
+		dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
+		return -EBUSY;
+	}
+
+	syspm_pfuze_chip = pfuze_chip;
+	pm_power_off_prepare = pfuze_power_off_prepare;
+
+	return 0;
+}
+
 static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 {
 	unsigned int value;
@@ -659,6 +736,20 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		}
 	}
 
+	if (of_property_read_bool(client->dev.of_node,
+				  "fsl,pmic-stby-poweroff"))
+		return pfuze_power_off_prepare_init(pfuze_chip);
+
+	return 0;
+}
+
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+	if (syspm_pfuze_chip) {
+		syspm_pfuze_chip = NULL;
+		pm_power_off_prepare = NULL;
+	}
+
 	return 0;
 }
 
@@ -669,6 +760,7 @@ static struct i2c_driver pfuze_driver = {
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
+	.remove = pfuze100_regulator_remove,
 };
 module_i2c_driver(pfuze_driver);
 
-- 
2.11.0

[PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option

[Oleksij Rempel]

This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2cb72824e800..da9d0c102a31 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -125,6 +129,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
-- 
2.11.0

[PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option

[Oleksij Rempel]

This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.

Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2cb72824e800..da9d0c102a31 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -125,6 +129,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 6/6] ARM: dts: imx6: RIoTboard provide standby on power off option

[Oleksij Rempel]

This board, as well as some other boards with i.MX6 and a PMIC, uses a
"PMIC_STBY_REQ" line to notify the PMIC about a state change.
The PMIC is programmed for a specific state change before triggering the
line.
In this case, PMIC_STBY_REQ can be used for stand by, sleep
and power off modes.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 2cb72824e800..da9d0c102a31 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -90,6 +90,10 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -125,6 +129,7 @@
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
-- 
2.11.0

Re: [PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Oleksij Rempel]

Hallo all,

Here Gentle Ping to the Old King

DT is already ACKed.

On 20.06.2017 16:09, Oleksij Rempel wrote:
> This patch series is providing power off support for Freescale/NXP iMX6 based
> boards with external power management integrated circuit (PMIC).
>
> changes:
> v6:
>  - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
>  - fix "MPIC_STBY_REQ" typo in the comment.
>
> v5:
>  - remove useless includes from pm-imx6.c patch
>  - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
>    patch
>
> v4:
>  - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
>    patch
>  - add Acked-by to "ARM: imx6q: provide documentation for new ..."
>    patch
>
> v3:
>  - set pm_power_off_prepare = NULL on .remove.
>  - documentation and spelling fixes.
>  - use %pf instead of lookup_symbol_name.
>
> Oleksij Rempel (6):
>   ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
>     property
>   ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
>     is set
>   kernel/reboot.c: export pm_power_off_prepare
>   regulator: pfuze100: add fsl,pmic-stby-poweroff property
>   regulator: pfuze100-regulator: provide pm_power_off_prepare handler
>   ARM: dts: imx6: RIoTboard provide standby on power off option
>
>  .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
>  .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
>  arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
>  arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
>  drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
>  kernel/reboot.c                                    |  1 +
>  6 files changed, 138 insertions(+)
>

[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Oleksij Rempel]

Hallo all,

Here Gentle Ping to the Old King

DT is already ACKed.

On 20.06.2017 16:09, Oleksij Rempel wrote:
> This patch series is providing power off support for Freescale/NXP iMX6 based
> boards with external power management integrated circuit (PMIC).
>
> changes:
> v6:
>  - rename imx6_pm_poweroff to imx6_pm_stby_poweroff
>  - fix "MPIC_STBY_REQ" typo in the comment.
>
> v5:
>  - remove useless includes from pm-imx6.c patch
>  - add Acked-by to "regulator: pfuze100: add fsl,pmic-stby-poweroff property"
>    patch
>
> v4:
>  - update comment in "regulator: pfuze100: add fsl,pmic-stby-poweroff ..."
>    patch
>  - add Acked-by to "ARM: imx6q: provide documentation for new ..."
>    patch
>
> v3:
>  - set pm_power_off_prepare = NULL on .remove.
>  - documentation and spelling fixes.
>  - use %pf instead of lookup_symbol_name.
>
> Oleksij Rempel (6):
>   ARM: imx6q: provide documentation for new fsl,pmic-stby-poweroff
>     property
>   ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff"
>     is set
>   kernel/reboot.c: export pm_power_off_prepare
>   regulator: pfuze100: add fsl,pmic-stby-poweroff property
>   regulator: pfuze100-regulator: provide pm_power_off_prepare handler
>   ARM: dts: imx6: RIoTboard provide standby on power off option
>
>  .../devicetree/bindings/clock/imx6q-clock.txt      |  8 ++
>  .../devicetree/bindings/regulator/pfuze100.txt     |  7 ++
>  arch/arm/boot/dts/imx6dl-riotboard.dts             |  5 ++
>  arch/arm/mach-imx/pm-imx6.c                        | 25 ++++++
>  drivers/regulator/pfuze100-regulator.c             | 92 ++++++++++++++++++++++
>  kernel/reboot.c                                    |  1 +
>  6 files changed, 138 insertions(+)
>

Re: [PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 863 bytes --]

On Tue, Jul 18, 2017 at 06:53:54AM +0200, Oleksij Rempel wrote:
> Hallo all,
> 
> Here Gentle Ping to the Old King
> 
> DT is already ACKed.

Please don't send content free pings and please allow a reasonable time
for review.  People get busy, go on holiday, attend conferences and so 
on so unless there is some reason for urgency (like critical bug fixes)
please allow at least a couple of weeks for review.  If there have been
review comments then people may be waiting for those to be addressed.

Sending content free pings adds to the mail volume (if they are seen at
all) which is often the problem and since they can't be reviewed
directly if something has gone wrong you'll have to resend the patches
anyway, though there are some other maintainers who like them - if in
doubt look at how patches for the subsystem are normally handled.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Mark Brown]

On Tue, Jul 18, 2017 at 06:53:54AM +0200, Oleksij Rempel wrote:
> Hallo all,
> 
> Here Gentle Ping to the Old King
> 
> DT is already ACKed.

Please don't send content free pings and please allow a reasonable time
for review.  People get busy, go on holiday, attend conferences and so 
on so unless there is some reason for urgency (like critical bug fixes)
please allow at least a couple of weeks for review.  If there have been
review comments then people may be waiting for those to be addressed.

Sending content free pings adds to the mail volume (if they are seen at
all) which is often the problem and since they can't be reviewed
directly if something has gone wrong you'll have to resend the patches
anyway, though there are some other maintainers who like them - if in
doubt look at how patches for the subsystem are normally handled.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170720/418d3ee2/attachment.sig>

Re: [PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Russell King - ARM Linux]

On Thu, Jul 20, 2017 at 01:37:01PM +0100, Mark Brown wrote:
> On Tue, Jul 18, 2017 at 06:53:54AM +0200, Oleksij Rempel wrote:
> > Hallo all,
> > 
> > Here Gentle Ping to the Old King
> > 
> > DT is already ACKed.
> 
> Please don't send content free pings and please allow a reasonable time
> for review.  People get busy, go on holiday, attend conferences and so 
> on so unless there is some reason for urgency (like critical bug fixes)
> please allow at least a couple of weeks for review.  If there have been
> review comments then people may be waiting for those to be addressed.
> 
> Sending content free pings adds to the mail volume (if they are seen at
> all) which is often the problem and since they can't be reviewed
> directly if something has gone wrong you'll have to resend the patches
> anyway, though there are some other maintainers who like them - if in
> doubt look at how patches for the subsystem are normally handled.

It also doesn't help that there's little context about who Oleksij is
expecting a reply from.  There's 11 individuals in the To: header.
Is the reference above refering to me?  Shrug, I don't know.  I doubt
it because I'm not maintaining the imx6 SoC support.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Russell King - ARM Linux]

On Thu, Jul 20, 2017 at 01:37:01PM +0100, Mark Brown wrote:
> On Tue, Jul 18, 2017 at 06:53:54AM +0200, Oleksij Rempel wrote:
> > Hallo all,
> > 
> > Here Gentle Ping to the Old King
> > 
> > DT is already ACKed.
> 
> Please don't send content free pings and please allow a reasonable time
> for review.  People get busy, go on holiday, attend conferences and so 
> on so unless there is some reason for urgency (like critical bug fixes)
> please allow at least a couple of weeks for review.  If there have been
> review comments then people may be waiting for those to be addressed.
> 
> Sending content free pings adds to the mail volume (if they are seen at
> all) which is often the problem and since they can't be reviewed
> directly if something has gone wrong you'll have to resend the patches
> anyway, though there are some other maintainers who like them - if in
> doubt look at how patches for the subsystem are normally handled.

It also doesn't help that there's little context about who Oleksij is
expecting a reply from.  There's 11 individuals in the To: header.
Is the reference above refering to me?  Shrug, I don't know.  I doubt
it because I'm not maintaining the imx6 SoC support.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 0/6] provide power off support for iMX6 with external PMIC

[Russell King - ARM Linux]

On Thu, Jul 20, 2017 at 01:37:01PM +0100, Mark Brown wrote:
> On Tue, Jul 18, 2017 at 06:53:54AM +0200, Oleksij Rempel wrote:
> > Hallo all,
> > 
> > Here Gentle Ping to the Old King
> > 
> > DT is already ACKed.
> 
> Please don't send content free pings and please allow a reasonable time
> for review.  People get busy, go on holiday, attend conferences and so 
> on so unless there is some reason for urgency (like critical bug fixes)
> please allow at least a couple of weeks for review.  If there have been
> review comments then people may be waiting for those to be addressed.
> 
> Sending content free pings adds to the mail volume (if they are seen at
> all) which is often the problem and since they can't be reviewed
> directly if something has gone wrong you'll have to resend the patches
> anyway, though there are some other maintainers who like them - if in
> doubt look at how patches for the subsystem are normally handled.

It also doesn't help that there's little context about who Oleksij is
expecting a reply from.  There's 11 individuals in the To: header.
Is the reference above refering to me?  Shrug, I don't know.  I doubt
it because I'm not maintaining the imx6 SoC support.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

[-- Attachment #1.1: Type: text/plain, Size: 1644 bytes --]



On 14.05.2018 07:10, Oleksij Rempel wrote:
> 
> 
> On 14.05.2018 06:33, Oleksij Rempel wrote:
>>
>>
>> On 12.05.2018 13:13, Rafael J. Wysocki wrote:
>>> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>>>> Hallo Andrew,
>>>> I need your ACK or NACK for this patch.
>>>>
>>>> This function is used to configure external PMIC to interpret
>>>> signal which will be triggered by pm_power_off as power off.
>>>> Since same signal can be used for stand by, I linked PMIC configuration
>>>> with pm_power_off_prepare to avoid possible conflicts.
>>>>
>>>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>>>> Export pm_power_off_prepare. It is needed to implement power off on
>>>>> Freescale/NXP iMX6 based boards with external power management
>>>>> integrated circuit (PMIC).
>>>>>
>>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>>>> ---
>>>>>  kernel/reboot.c | 1 +
>>>>>  1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>>>> index e4ced883d8de..350be6baa60d 100644
>>>>> --- a/kernel/reboot.c
>>>>> +++ b/kernel/reboot.c
>>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>>   */
>>>>>  
>>>>>  void (*pm_power_off_prepare)(void);
>>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>>
>>> Why not EXPORT_SYMBOL_GPL() ?
>>
>> No special reason. Fixed.
>> Any other comments?
>>
> 
> Or with other words, will it be enough to get your Signed-of-by for this
> patch?

Hi again,

i was punished by my colleagues and actually by Russel for asking
"Signed-of-by". So, I correct my self, is it enough for a Reviewed-by?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

On 14.05.2018 07:10, Oleksij Rempel wrote:
> 
> 
> On 14.05.2018 06:33, Oleksij Rempel wrote:
>>
>>
>> On 12.05.2018 13:13, Rafael J. Wysocki wrote:
>>> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>>>> Hallo Andrew,
>>>> I need your ACK or NACK for this patch.
>>>>
>>>> This function is used to configure external PMIC to interpret
>>>> signal which will be triggered by pm_power_off as power off.
>>>> Since same signal can be used for stand by, I linked PMIC configuration
>>>> with pm_power_off_prepare to avoid possible conflicts.
>>>>
>>>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>>>> Export pm_power_off_prepare. It is needed to implement power off on
>>>>> Freescale/NXP iMX6 based boards with external power management
>>>>> integrated circuit (PMIC).
>>>>>
>>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>>>> ---
>>>>>  kernel/reboot.c | 1 +
>>>>>  1 file changed, 1 insertion(+)
>>>>>
>>>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>>>> index e4ced883d8de..350be6baa60d 100644
>>>>> --- a/kernel/reboot.c
>>>>> +++ b/kernel/reboot.c
>>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>>   */
>>>>>  
>>>>>  void (*pm_power_off_prepare)(void);
>>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>>
>>> Why not EXPORT_SYMBOL_GPL() ?
>>
>> No special reason. Fixed.
>> Any other comments?
>>
> 
> Or with other words, will it be enough to get your Signed-of-by for this
> patch?

Hi again,

i was punished by my colleagues and actually by Russel for asking
"Signed-of-by". So, I correct my self, is it enough for a Reviewed-by?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180514/61f11d48/attachment.sig>

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

[-- Attachment #1.1: Type: text/plain, Size: 1397 bytes --]



On 14.05.2018 06:33, Oleksij Rempel wrote:
> 
> 
> On 12.05.2018 13:13, Rafael J. Wysocki wrote:
>> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>>> Hallo Andrew,
>>> I need your ACK or NACK for this patch.
>>>
>>> This function is used to configure external PMIC to interpret
>>> signal which will be triggered by pm_power_off as power off.
>>> Since same signal can be used for stand by, I linked PMIC configuration
>>> with pm_power_off_prepare to avoid possible conflicts.
>>>
>>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>>> Export pm_power_off_prepare. It is needed to implement power off on
>>>> Freescale/NXP iMX6 based boards with external power management
>>>> integrated circuit (PMIC).
>>>>
>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>>> ---
>>>>  kernel/reboot.c | 1 +
>>>>  1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>>> index e4ced883d8de..350be6baa60d 100644
>>>> --- a/kernel/reboot.c
>>>> +++ b/kernel/reboot.c
>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>   */
>>>>  
>>>>  void (*pm_power_off_prepare)(void);
>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>
>> Why not EXPORT_SYMBOL_GPL() ?
> 
> No special reason. Fixed.
> Any other comments?
> 

Or with other words, will it be enough to get your Signed-of-by for this
patch?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

On 14.05.2018 06:33, Oleksij Rempel wrote:
> 
> 
> On 12.05.2018 13:13, Rafael J. Wysocki wrote:
>> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>>> Hallo Andrew,
>>> I need your ACK or NACK for this patch.
>>>
>>> This function is used to configure external PMIC to interpret
>>> signal which will be triggered by pm_power_off as power off.
>>> Since same signal can be used for stand by, I linked PMIC configuration
>>> with pm_power_off_prepare to avoid possible conflicts.
>>>
>>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>>> Export pm_power_off_prepare. It is needed to implement power off on
>>>> Freescale/NXP iMX6 based boards with external power management
>>>> integrated circuit (PMIC).
>>>>
>>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>>> ---
>>>>  kernel/reboot.c | 1 +
>>>>  1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>>> index e4ced883d8de..350be6baa60d 100644
>>>> --- a/kernel/reboot.c
>>>> +++ b/kernel/reboot.c
>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>   */
>>>>  
>>>>  void (*pm_power_off_prepare)(void);
>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>
>> Why not EXPORT_SYMBOL_GPL() ?
> 
> No special reason. Fixed.
> Any other comments?
> 

Or with other words, will it be enough to get your Signed-of-by for this
patch?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180514/3f63f47f/attachment-0001.sig>

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

[-- Attachment #1.1: Type: text/plain, Size: 1220 bytes --]



On 12.05.2018 13:13, Rafael J. Wysocki wrote:
> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>> Hallo Andrew,
>> I need your ACK or NACK for this patch.
>>
>> This function is used to configure external PMIC to interpret
>> signal which will be triggered by pm_power_off as power off.
>> Since same signal can be used for stand by, I linked PMIC configuration
>> with pm_power_off_prepare to avoid possible conflicts.
>>
>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>> Export pm_power_off_prepare. It is needed to implement power off on
>>> Freescale/NXP iMX6 based boards with external power management
>>> integrated circuit (PMIC).
>>>
>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>> ---
>>>  kernel/reboot.c | 1 +
>>>  1 file changed, 1 insertion(+)
>>>
>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>> index e4ced883d8de..350be6baa60d 100644
>>> --- a/kernel/reboot.c
>>> +++ b/kernel/reboot.c
>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>   */
>>>  
>>>  void (*pm_power_off_prepare)(void);
>>> +EXPORT_SYMBOL(pm_power_off_prepare);
> 
> Why not EXPORT_SYMBOL_GPL() ?

No special reason. Fixed.
Any other comments?


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

On 12.05.2018 13:13, Rafael J. Wysocki wrote:
> On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
>> Hallo Andrew,
>> I need your ACK or NACK for this patch.
>>
>> This function is used to configure external PMIC to interpret
>> signal which will be triggered by pm_power_off as power off.
>> Since same signal can be used for stand by, I linked PMIC configuration
>> with pm_power_off_prepare to avoid possible conflicts.
>>
>> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
>>> Export pm_power_off_prepare. It is needed to implement power off on
>>> Freescale/NXP iMX6 based boards with external power management
>>> integrated circuit (PMIC).
>>>
>>> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>>> ---
>>>  kernel/reboot.c | 1 +
>>>  1 file changed, 1 insertion(+)
>>>
>>> diff --git a/kernel/reboot.c b/kernel/reboot.c
>>> index e4ced883d8de..350be6baa60d 100644
>>> --- a/kernel/reboot.c
>>> +++ b/kernel/reboot.c
>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>   */
>>>  
>>>  void (*pm_power_off_prepare)(void);
>>> +EXPORT_SYMBOL(pm_power_off_prepare);
> 
> Why not EXPORT_SYMBOL_GPL() ?

No special reason. Fixed.
Any other comments?

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180514/8e85cd06/attachment.sig>

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Rafael J. Wysocki]

On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
> Hallo Andrew,
> I need your ACK or NACK for this patch.
> 
> This function is used to configure external PMIC to interpret
> signal which will be triggered by pm_power_off as power off.
> Since same signal can be used for stand by, I linked PMIC configuration
> with pm_power_off_prepare to avoid possible conflicts.
> 
> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
> > Export pm_power_off_prepare. It is needed to implement power off on
> > Freescale/NXP iMX6 based boards with external power management
> > integrated circuit (PMIC).
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > ---
> >  kernel/reboot.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/kernel/reboot.c b/kernel/reboot.c
> > index e4ced883d8de..350be6baa60d 100644
> > --- a/kernel/reboot.c
> > +++ b/kernel/reboot.c
> > @@ -49,6 +49,7 @@ int reboot_force;
> >   */
> >  
> >  void (*pm_power_off_prepare)(void);
> > +EXPORT_SYMBOL(pm_power_off_prepare);

Why not EXPORT_SYMBOL_GPL() ?

> >  
> >  /**
> >   *	emergency_restart - reboot the system
> 
> 

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Rafael J. Wysocki]

On Friday, May 4, 2018 8:50:52 PM CEST Oleksij Rempel wrote:
> Hallo Andrew,
> I need your ACK or NACK for this patch.
> 
> This function is used to configure external PMIC to interpret
> signal which will be triggered by pm_power_off as power off.
> Since same signal can be used for stand by, I linked PMIC configuration
> with pm_power_off_prepare to avoid possible conflicts.
> 
> On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
> > Export pm_power_off_prepare. It is needed to implement power off on
> > Freescale/NXP iMX6 based boards with external power management
> > integrated circuit (PMIC).
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > ---
> >  kernel/reboot.c | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/kernel/reboot.c b/kernel/reboot.c
> > index e4ced883d8de..350be6baa60d 100644
> > --- a/kernel/reboot.c
> > +++ b/kernel/reboot.c
> > @@ -49,6 +49,7 @@ int reboot_force;
> >   */
> >  
> >  void (*pm_power_off_prepare)(void);
> > +EXPORT_SYMBOL(pm_power_off_prepare);

Why not EXPORT_SYMBOL_GPL() ?

> >  
> >  /**
> >   *	emergency_restart - reboot the system
> 
> 

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Rafael J. Wysocki]

On 5/5/2018 9:01 AM, Oleksij Rempel wrote:
> Moving Rafael from Cc to To.
>
> Hi Rafael,
>
> can you please help here?
> I need your ACK or NACK for this patch.

Sorry for the delay, I'll have a closer look at it in the next couple of 
days.

Thanks,
Rafael


> On Fri, May 04, 2018 at 01:49:56PM -0700, Andrew Morton wrote:
>> On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:
>>
>>> Hallo Andrew,
>>> I need your ACK or NACK for this patch.
>>>
>>> This function is used to configure external PMIC to interpret
>>> signal which will be triggered by pm_power_off as power off.
>>> Since same signal can be used for stand by, I linked PMIC configuration
>>> with pm_power_off_prepare to avoid possible conflicts.
>>>
>>> ...
>>>
>>>> --- a/kernel/reboot.c
>>>> +++ b/kernel/reboot.c
>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>    */
>>>>   
>>>>   void (*pm_power_off_prepare)(void);
>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>>>   
>> OK by me, but it's more of a Rafael thing.
>>

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Rafael J. Wysocki]

On 5/5/2018 9:01 AM, Oleksij Rempel wrote:
> Moving Rafael from Cc to To.
>
> Hi Rafael,
>
> can you please help here?
> I need your ACK or NACK for this patch.

Sorry for the delay, I'll have a closer look at it in the next couple of 
days.

Thanks,
Rafael


> On Fri, May 04, 2018 at 01:49:56PM -0700, Andrew Morton wrote:
>> On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:
>>
>>> Hallo Andrew,
>>> I need your ACK or NACK for this patch.
>>>
>>> This function is used to configure external PMIC to interpret
>>> signal which will be triggered by pm_power_off as power off.
>>> Since same signal can be used for stand by, I linked PMIC configuration
>>> with pm_power_off_prepare to avoid possible conflicts.
>>>
>>> ...
>>>
>>>> --- a/kernel/reboot.c
>>>> +++ b/kernel/reboot.c
>>>> @@ -49,6 +49,7 @@ int reboot_force;
>>>>    */
>>>>   
>>>>   void (*pm_power_off_prepare)(void);
>>>> +EXPORT_SYMBOL(pm_power_off_prepare);
>>>>   
>> OK by me, but it's more of a Rafael thing.
>>

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 1214 bytes --]

Moving Rafael from Cc to To.

Hi Rafael,

can you please help here?
I need your ACK or NACK for this patch.

On Fri, May 04, 2018 at 01:49:56PM -0700, Andrew Morton wrote:
> On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:
> 
> > Hallo Andrew,
> > I need your ACK or NACK for this patch.
> > 
> > This function is used to configure external PMIC to interpret
> > signal which will be triggered by pm_power_off as power off.
> > Since same signal can be used for stand by, I linked PMIC configuration
> > with pm_power_off_prepare to avoid possible conflicts.
> > 
> > ...
> >
> > > --- a/kernel/reboot.c
> > > +++ b/kernel/reboot.c
> > > @@ -49,6 +49,7 @@ int reboot_force;
> > >   */
> > >  
> > >  void (*pm_power_off_prepare)(void);
> > > +EXPORT_SYMBOL(pm_power_off_prepare);
> > >  
> 
> OK by me, but it's more of a Rafael thing.
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Moving Rafael from Cc to To.

Hi Rafael,

can you please help here?
I need your ACK or NACK for this patch.

On Fri, May 04, 2018 at 01:49:56PM -0700, Andrew Morton wrote:
> On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:
> 
> > Hallo Andrew,
> > I need your ACK or NACK for this patch.
> > 
> > This function is used to configure external PMIC to interpret
> > signal which will be triggered by pm_power_off as power off.
> > Since same signal can be used for stand by, I linked PMIC configuration
> > with pm_power_off_prepare to avoid possible conflicts.
> > 
> > ...
> >
> > > --- a/kernel/reboot.c
> > > +++ b/kernel/reboot.c
> > > @@ -49,6 +49,7 @@ int reboot_force;
> > >   */
> > >  
> > >  void (*pm_power_off_prepare)(void);
> > > +EXPORT_SYMBOL(pm_power_off_prepare);
> > >  
> 
> OK by me, but it's more of a Rafael thing.
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180505/28f953ea/attachment-0001.sig>

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Andrew Morton]

On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:

> Hallo Andrew,
> I need your ACK or NACK for this patch.
> 
> This function is used to configure external PMIC to interpret
> signal which will be triggered by pm_power_off as power off.
> Since same signal can be used for stand by, I linked PMIC configuration
> with pm_power_off_prepare to avoid possible conflicts.
> 
> ...
>
> > --- a/kernel/reboot.c
> > +++ b/kernel/reboot.c
> > @@ -49,6 +49,7 @@ int reboot_force;
> >   */
> >  
> >  void (*pm_power_off_prepare)(void);
> > +EXPORT_SYMBOL(pm_power_off_prepare);
> >  

OK by me, but it's more of a Rafael thing.

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Andrew Morton]

On Fri, 4 May 2018 20:50:52 +0200 Oleksij Rempel <o.rempel@pengutronix.de> wrote:

> Hallo Andrew,
> I need your ACK or NACK for this patch.
> 
> This function is used to configure external PMIC to interpret
> signal which will be triggered by pm_power_off as power off.
> Since same signal can be used for stand by, I linked PMIC configuration
> with pm_power_off_prepare to avoid possible conflicts.
> 
> ...
>
> > --- a/kernel/reboot.c
> > +++ b/kernel/reboot.c
> > @@ -49,6 +49,7 @@ int reboot_force;
> >   */
> >  
> >  void (*pm_power_off_prepare)(void);
> > +EXPORT_SYMBOL(pm_power_off_prepare);
> >  

OK by me, but it's more of a Rafael thing.

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

[-- Attachment #1: Type: text/plain, Size: 1351 bytes --]

Hallo Andrew,
I need your ACK or NACK for this patch.

This function is used to configure external PMIC to interpret
signal which will be triggered by pm_power_off as power off.
Since same signal can be used for stand by, I linked PMIC configuration
with pm_power_off_prepare to avoid possible conflicts.

On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
> Export pm_power_off_prepare. It is needed to implement power off on
> Freescale/NXP iMX6 based boards with external power management
> integrated circuit (PMIC).
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  kernel/reboot.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> index e4ced883d8de..350be6baa60d 100644
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -49,6 +49,7 @@ int reboot_force;
>   */
>  
>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL(pm_power_off_prepare);
>  
>  /**
>   *	emergency_restart - reboot the system
> -- 
> 2.16.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Hallo Andrew,
I need your ACK or NACK for this patch.

This function is used to configure external PMIC to interpret
signal which will be triggered by pm_power_off as power off.
Since same signal can be used for stand by, I linked PMIC configuration
with pm_power_off_prepare to avoid possible conflicts.

On Mon, Mar 05, 2018 at 11:25:20AM +0100, Oleksij Rempel wrote:
> Export pm_power_off_prepare. It is needed to implement power off on
> Freescale/NXP iMX6 based boards with external power management
> integrated circuit (PMIC).
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  kernel/reboot.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/kernel/reboot.c b/kernel/reboot.c
> index e4ced883d8de..350be6baa60d 100644
> --- a/kernel/reboot.c
> +++ b/kernel/reboot.c
> @@ -49,6 +49,7 @@ int reboot_force;
>   */
>  
>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL(pm_power_off_prepare);
>  
>  /**
>   *	emergency_restart - reboot the system
> -- 
> 2.16.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180504/1430215f/attachment.sig>

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index e4ced883d8de..350be6baa60d 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.16.1

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index e4ced883d8de..350be6baa60d 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.16.1

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index e4ced883d8de..350be6baa60d 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.16.1

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Leonard Crestez]

On Thu, 2017-12-07 at 06:36 +0100, Oleksij Rempel wrote:
> 
> On 07.12.2017 00:11, Christoph Hellwig wrote:
> > 
> > > 
> > >  void (*pm_power_off_prepare)(void);
> > > +EXPORT_SYMBOL(pm_power_off_prepare);
> > EXPORT_SYMBOL_GPL for something this deeply internal, please.
> Ok,
> probably all other symbols should be converted in this file in to
> EXPORT_SYMBOL_GPL as well?
> 
> grep EXPORT_SYMBOL kernel/reboot.c
> EXPORT_SYMBOL(cad_pid);
> EXPORT_SYMBOL(pm_power_off_prepare);
> EXPORT_SYMBOL_GPL(emergency_restart);
> EXPORT_SYMBOL(register_reboot_notifier);
> EXPORT_SYMBOL(unregister_reboot_notifier);
> EXPORT_SYMBOL(devm_register_reboot_notifier);
> EXPORT_SYMBOL(register_restart_handler);
> EXPORT_SYMBOL(unregister_restart_handler);
> EXPORT_SYMBOL_GPL(kernel_restart);
> EXPORT_SYMBOL_GPL(kernel_halt);
> EXPORT_SYMBOL_GPL(kernel_power_off);
> EXPORT_SYMBOL_GPL(orderly_poweroff);
> EXPORT_SYMBOL_GPL(orderly_reboot);

This call looks much more deeply internal than those other functions,
it's not like reboot_notifier and restart_handler.

It seems that the only user of pm_power_off_prepare right now is the
ACPI core and your patch uses it in a regulator driver. This looks
extremely strange. Maybe this is why imx maintainers are stalling on
this patch?

It might help if the ACPI/PM maintainers ack/review this part
explicitly, and the usage in part 5:

https://patchwork.kernel.org/patch/9799615/

--
Regards,
Leonard

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Leonard Crestez]

On Thu, 2017-12-07 at 06:36 +0100, Oleksij Rempel wrote:
> 
> On 07.12.2017 00:11, Christoph Hellwig wrote:
> > 
> > > 
> > >  void (*pm_power_off_prepare)(void);
> > > +EXPORT_SYMBOL(pm_power_off_prepare);
> > EXPORT_SYMBOL_GPL for something this deeply internal, please.
> Ok,
> probably all other symbols should be converted in this file in to
> EXPORT_SYMBOL_GPL as well?
> 
> grep EXPORT_SYMBOL kernel/reboot.c
> EXPORT_SYMBOL(cad_pid);
> EXPORT_SYMBOL(pm_power_off_prepare);
> EXPORT_SYMBOL_GPL(emergency_restart);
> EXPORT_SYMBOL(register_reboot_notifier);
> EXPORT_SYMBOL(unregister_reboot_notifier);
> EXPORT_SYMBOL(devm_register_reboot_notifier);
> EXPORT_SYMBOL(register_restart_handler);
> EXPORT_SYMBOL(unregister_restart_handler);
> EXPORT_SYMBOL_GPL(kernel_restart);
> EXPORT_SYMBOL_GPL(kernel_halt);
> EXPORT_SYMBOL_GPL(kernel_power_off);
> EXPORT_SYMBOL_GPL(orderly_poweroff);
> EXPORT_SYMBOL_GPL(orderly_reboot);

This call looks much more deeply internal than those other functions,
it's not like reboot_notifier and restart_handler.

It seems that the only user of pm_power_off_prepare right now is the
ACPI core and your patch uses it in a regulator driver. This looks
extremely strange. Maybe this is why imx maintainers are stalling on
this patch?

It might help if the ACPI/PM maintainers ack/review this part
explicitly, and the usage in part 5:

https://patchwork.kernel.org/patch/9799615/

--
Regards,
Leonard

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Leonard Crestez]

On Thu, 2017-12-07 at 06:36 +0100, Oleksij Rempel wrote:
> 
> On 07.12.2017 00:11, Christoph Hellwig wrote:
> > 
> > > 
> > > ?void (*pm_power_off_prepare)(void);
> > > +EXPORT_SYMBOL(pm_power_off_prepare);
> > EXPORT_SYMBOL_GPL for something this deeply internal, please.
> Ok,
> probably all other symbols should be converted in this file in to
> EXPORT_SYMBOL_GPL as well?
> 
> grep EXPORT_SYMBOL kernel/reboot.c
> EXPORT_SYMBOL(cad_pid);
> EXPORT_SYMBOL(pm_power_off_prepare);
> EXPORT_SYMBOL_GPL(emergency_restart);
> EXPORT_SYMBOL(register_reboot_notifier);
> EXPORT_SYMBOL(unregister_reboot_notifier);
> EXPORT_SYMBOL(devm_register_reboot_notifier);
> EXPORT_SYMBOL(register_restart_handler);
> EXPORT_SYMBOL(unregister_restart_handler);
> EXPORT_SYMBOL_GPL(kernel_restart);
> EXPORT_SYMBOL_GPL(kernel_halt);
> EXPORT_SYMBOL_GPL(kernel_power_off);
> EXPORT_SYMBOL_GPL(orderly_poweroff);
> EXPORT_SYMBOL_GPL(orderly_reboot);

This call looks much more deeply internal than those other functions,
it's not like reboot_notifier and restart_handler.

It seems that the only user of pm_power_off_prepare right now is the
ACPI core and your patch uses it in a regulator driver. This looks
extremely strange. Maybe this is why imx maintainers are stalling on
this patch?

It might help if the ACPI/PM maintainers ack/review this part
explicitly, and the usage in part 5:

https://patchwork.kernel.org/patch/9799615/

--
Regards,
Leonard

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

On 07.12.2017 00:11, Christoph Hellwig wrote:
>>  void (*pm_power_off_prepare)(void);
>> +EXPORT_SYMBOL(pm_power_off_prepare);
> 
> EXPORT_SYMBOL_GPL for something this deeply internal, please.

Ok,
probably all other symbols should be converted in this file in to
EXPORT_SYMBOL_GPL as well?

grep EXPORT_SYMBOL kernel/reboot.c
EXPORT_SYMBOL(cad_pid);
EXPORT_SYMBOL(pm_power_off_prepare);
EXPORT_SYMBOL_GPL(emergency_restart);
EXPORT_SYMBOL(register_reboot_notifier);
EXPORT_SYMBOL(unregister_reboot_notifier);
EXPORT_SYMBOL(devm_register_reboot_notifier);
EXPORT_SYMBOL(register_restart_handler);
EXPORT_SYMBOL(unregister_restart_handler);
EXPORT_SYMBOL_GPL(kernel_restart);
EXPORT_SYMBOL_GPL(kernel_halt);
EXPORT_SYMBOL_GPL(kernel_power_off);
EXPORT_SYMBOL_GPL(orderly_poweroff);
EXPORT_SYMBOL_GPL(orderly_reboot);

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

On 07.12.2017 00:11, Christoph Hellwig wrote:
>>  void (*pm_power_off_prepare)(void);
>> +EXPORT_SYMBOL(pm_power_off_prepare);
> 
> EXPORT_SYMBOL_GPL for something this deeply internal, please.

Ok,
probably all other symbols should be converted in this file in to
EXPORT_SYMBOL_GPL as well?

grep EXPORT_SYMBOL kernel/reboot.c
EXPORT_SYMBOL(cad_pid);
EXPORT_SYMBOL(pm_power_off_prepare);
EXPORT_SYMBOL_GPL(emergency_restart);
EXPORT_SYMBOL(register_reboot_notifier);
EXPORT_SYMBOL(unregister_reboot_notifier);
EXPORT_SYMBOL(devm_register_reboot_notifier);
EXPORT_SYMBOL(register_restart_handler);
EXPORT_SYMBOL(unregister_restart_handler);
EXPORT_SYMBOL_GPL(kernel_restart);
EXPORT_SYMBOL_GPL(kernel_halt);
EXPORT_SYMBOL_GPL(kernel_power_off);
EXPORT_SYMBOL_GPL(orderly_poweroff);
EXPORT_SYMBOL_GPL(orderly_reboot);

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Christoph Hellwig]

>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL(pm_power_off_prepare);

EXPORT_SYMBOL_GPL for something this deeply internal, please.

Re: [PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Christoph Hellwig]

>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL(pm_power_off_prepare);

EXPORT_SYMBOL_GPL for something this deeply internal, please.

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Christoph Hellwig]

>  void (*pm_power_off_prepare)(void);
> +EXPORT_SYMBOL(pm_power_off_prepare);

EXPORT_SYMBOL_GPL for something this deeply internal, please.

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v6 3/6] kernel/reboot.c: export pm_power_off_prepare

[Oleksij Rempel]

Export pm_power_off_prepare. It is needed to implement power off on
Freescale/NXP iMX6 based boards with external power management
integrated circuit (PMIC).

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 kernel/reboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/reboot.c b/kernel/reboot.c
index bd30a973fe94..a6903bf772c7 100644
--- a/kernel/reboot.c
+++ b/kernel/reboot.c
@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system
-- 
2.11.0