From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>, Carlo Caione <carlo@caione.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/9] ARM64: dts: meson: update around mmc
Date: Mon, 21 Aug 2017 18:06:28 +0200 [thread overview]
Message-ID: <20170821160637.22456-1-jbrunet@baylibre.com> (raw)
This patchset feature updates around mmc. It is linked to this series [0]
but does not strictly depends on it. It adds:
* The regulator settling times for the gpio regulator of nanopi-k2 and
the libretech-cc.
* UHS modes for the p20x and nanopi-k2.
* clk-gate pins: these are the pinmuxes used for the clk-stop work
around explained here [1]
It also removes cap-sd-highspeed from eMMC nodes.
Special note on SDR104:
While the PCB of the p200 and the libretech-cc does not seems to handle
SDR104 completely, the nanopi-k2 seems to be handling it correctly.
The patch enabling this mode on the nanopi-k2 is the last one of this
series. It should propabably be left out until more people can test
sdr104 on the nanopi-k2
This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the
gxl-s905x-libretech-cc
Changes since v1 [2]:
* Reorder patches to put fixes first, then enhancements
* Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4)
[0]: https://lkml.kernel.org/r/20170821160301.21899-1-jbrunet@baylibre.com
[1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet@baylibre.com
[2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet@baylibre.com
Jerome Brunet (9):
ARM64: dts: meson-gx: Use correct mmc clock source 0
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
ARM64: dts: meson: add mmc clk gate pins
ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability
ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 +++---
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++---
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++---
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 ++---
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++---
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 +++---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++--
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++--
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 ++++--
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 +++---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 +++---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++--
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++--
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 -
14 files changed, 146 insertions(+), 50 deletions(-)
--
2.9.5
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/9] ARM64: dts: meson: update around mmc
Date: Mon, 21 Aug 2017 18:06:28 +0200 [thread overview]
Message-ID: <20170821160637.22456-1-jbrunet@baylibre.com> (raw)
This patchset feature updates around mmc. It is linked to this series [0]
but does not strictly depends on it. It adds:
* The regulator settling times for the gpio regulator of nanopi-k2 and
the libretech-cc.
* UHS modes for the p20x and nanopi-k2.
* clk-gate pins: these are the pinmuxes used for the clk-stop work
around explained here [1]
It also removes cap-sd-highspeed from eMMC nodes.
Special note on SDR104:
While the PCB of the p200 and the libretech-cc does not seems to handle
SDR104 completely, the nanopi-k2 seems to be handling it correctly.
The patch enabling this mode on the nanopi-k2 is the last one of this
series. It should propabably be left out until more people can test
sdr104 on the nanopi-k2
This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the
gxl-s905x-libretech-cc
Changes since v1 [2]:
* Reorder patches to put fixes first, then enhancements
* Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4)
[0]: https://lkml.kernel.org/r/20170821160301.21899-1-jbrunet at baylibre.com
[1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet at baylibre.com
[2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet at baylibre.com
Jerome Brunet (9):
ARM64: dts: meson-gx: Use correct mmc clock source 0
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
ARM64: dts: meson: add mmc clk gate pins
ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability
ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 +++---
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++---
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++---
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 ++---
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++---
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 +++---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++--
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++--
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 ++++--
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 +++---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 +++---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++--
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++--
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 -
14 files changed, 146 insertions(+), 50 deletions(-)
--
2.9.5
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 0/9] ARM64: dts: meson: update around mmc
Date: Mon, 21 Aug 2017 18:06:28 +0200 [thread overview]
Message-ID: <20170821160637.22456-1-jbrunet@baylibre.com> (raw)
This patchset feature updates around mmc. It is linked to this series [0]
but does not strictly depends on it. It adds:
* The regulator settling times for the gpio regulator of nanopi-k2 and
the libretech-cc.
* UHS modes for the p20x and nanopi-k2.
* clk-gate pins: these are the pinmuxes used for the clk-stop work
around explained here [1]
It also removes cap-sd-highspeed from eMMC nodes.
Special note on SDR104:
While the PCB of the p200 and the libretech-cc does not seems to handle
SDR104 completely, the nanopi-k2 seems to be handling it correctly.
The patch enabling this mode on the nanopi-k2 is the last one of this
series. It should propabably be left out until more people can test
sdr104 on the nanopi-k2
This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the
gxl-s905x-libretech-cc
Changes since v1 [2]:
* Reorder patches to put fixes first, then enhancements
* Fix error in the SDIO clk_gate pins (GPIOX_5 instead GPIOX_4)
[0]: https://lkml.kernel.org/r/20170821160301.21899-1-jbrunet at baylibre.com
[1]: https://lkml.kernel.org/r/20170821160301.21899-11-jbrunet at baylibre.com
[2]: https://lkml.kernel.org/r/20170804180816.18737-1-jbrunet at baylibre.com
Jerome Brunet (9):
ARM64: dts: meson-gx: Use correct mmc clock source 0
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
ARM64: dts: meson: add mmc clk gate pins
ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability
ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 +++---
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 19 ++++++++---
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++---
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 ++---
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 +++++---
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 +++---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 39 ++++++++++++++++++++--
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 ++--
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 10 ++++--
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 +++---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 +++---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 39 ++++++++++++++++++++--
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 ++--
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 -
14 files changed, 146 insertions(+), 50 deletions(-)
--
2.9.5
next reply other threads:[~2017-08-21 16:06 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-21 16:06 Jerome Brunet [this message]
2017-08-21 16:06 ` [PATCH v2 0/9] ARM64: dts: meson: update around mmc Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 1/9] ARM64: dts: meson-gx: Use correct mmc clock source 0 Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 2/9] ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 3/9] ARM64: dts: meson: add mmc clk gate pins Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 4/9] ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 5/9] ARM64: dts: meson-gxl: libretech-cc: " Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 6/9] ARM64: dts: meson-gxl: libretech-cc: remove sdr104 capability Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 7/9] ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 8/9] ARM64: dts: meson-gxbb: nanopi-k2: " Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` [PATCH v2 9/9] ARM64: dts: meson-gxbb: nanopi-k2: enable sdr104 mode Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
2017-08-21 16:06 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170821160637.22456-1-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.