From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, broonie@kernel.org, torvalds@linux-foundation.org,
vinod.koul@intel.com, liam.r.girdwood@linux.intel.com,
andriy.shevchenko@linux.intel.com, arnd@arndb.de,
linux-kernel@vger.kernel.org,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [RFC PATCH 1/7] ASoC: Intel: Fix Kconfig
Date: Fri, 17 Nov 2017 18:01:56 -0600 [thread overview]
Message-ID: <20171118000202.22302-2-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20171118000202.22302-1-pierre-louis.bossart@linux.intel.com>
Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify which options distro configurations
should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)
There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.
Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
sound/soc/intel/Kconfig | 57 +++++++++++++++----------
sound/soc/intel/boards/Kconfig | 97 ++++++++++++++++++++++++------------------
2 files changed, 90 insertions(+), 64 deletions(-)
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 7b49d04e3c60..98ef2273665f 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -1,3 +1,18 @@
+config SND_SOC_INTEL_SST_TOPLEVEL
+ bool "Intel ASoC SST drivers"
+ default y
+ depends on X86 || COMPILE_TEST
+ help
+ Intel ASoC SST Platform Drivers. If you have a Intel machine that
+ has audio controller with a DSP and I2S or DMIC port, then
+ enable this option by saying Y
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel SST drivers.
+
+if SND_SOC_INTEL_SST_TOPLEVEL
+
config SND_SST_IPC
tristate
@@ -11,9 +26,6 @@ config SND_SST_IPC_ACPI
select SND_SOC_INTEL_SST
select IOSF_MBI
-config SND_SOC_INTEL_COMMON
- tristate
-
config SND_SOC_INTEL_SST
tristate
select SND_SOC_INTEL_SST_ACPI if ACPI
@@ -25,47 +37,48 @@ config SND_SOC_INTEL_SST_FIRMWARE
config SND_SOC_INTEL_SST_ACPI
tristate
-config SND_SOC_ACPI_INTEL_MATCH
- tristate
- select SND_SOC_ACPI if ACPI
-
-config SND_SOC_INTEL_SST_TOPLEVEL
- tristate "Intel ASoC SST drivers"
- depends on X86 || COMPILE_TEST
- select SND_SOC_INTEL_MACH
- select SND_SOC_INTEL_COMMON
- help
- Intel ASoC Audio Drivers. If you have a Intel machine that
- has audio controller with a DSP and I2S or DMIC port, then
- enable this option by saying Y or M
- If unsure select "N".
-
config SND_SOC_INTEL_HASWELL
tristate "Intel ASoC SST driver for Haswell/Broadwell"
- depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF
+ depends on SND_DMA_SGBUF
depends on DMADEVICES
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_FIRMWARE
+ select SND_SOC_INTEL_COMMON
config SND_SOC_INTEL_BAYTRAIL
tristate "Intel ASoC SST driver for Baytrail (legacy)"
- depends on SND_SOC_INTEL_SST_TOPLEVEL
depends on DMADEVICES
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_FIRMWARE
+ select SND_SOC_INTEL_COMMON
config SND_SST_ATOM_HIFI2_PLATFORM
tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)"
- depends on SND_SOC_INTEL_SST_TOPLEVEL && X86
+ depends on X86
select SND_SOC_COMPRESS
+ select SND_SOC_INTEL_COMMON
config SND_SOC_INTEL_SKYLAKE
tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
- depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI
+ depends on PCI && ACPI
select SND_HDA_EXT_CORE
select SND_HDA_DSP_LOADER
select SND_SOC_TOPOLOGY
select SND_SOC_INTEL_SST
+ select SND_SOC_INTEL_COMMON
+
+endif ## SND_SOC_INTEL_SST_TOPLEVEL
# ASoC codec drivers
source "sound/soc/intel/boards/Kconfig"
+
+# configs common to SST and SOF to compile sound/soc/intel/common
+# directory and use matching tables
+
+config SND_SOC_INTEL_COMMON
+ tristate
+ select SND_SOC_ACPI_INTEL_MATCH if ACPI
+
+config SND_SOC_ACPI_INTEL_MATCH
+ tristate
+ select SND_SOC_ACPI if ACPI
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 6f754708a48c..4ae44b0cea0a 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -1,7 +1,14 @@
-config SND_SOC_INTEL_MACH
- tristate "Intel Audio machine drivers"
- depends on SND_SOC_INTEL_SST_TOPLEVEL
- select SND_SOC_ACPI_INTEL_MATCH if ACPI
+config SND_SOC_INTEL_MACH
+ bool "Intel ASoC machine drivers"
+ default y
+ help
+ Intel ASoC Audio Machine Drivers. If you have a Intel machine that
+ has audio controller with a DSP and I2S or DMIC port, then
+ enable this option by saying Y
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel SST machine drivers.
if SND_SOC_INTEL_MACH
@@ -17,103 +24,108 @@ config SND_MFLD_MACHINE
Say Y if you have such a device.
If unsure select "N".
+if SND_SOC_INTEL_HASWELL
+
config SND_SOC_INTEL_HASWELL_MACH
tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on SND_SOC_INTEL_HASWELL
select SND_SOC_RT5640
help
This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
- Ultrabook platforms.
- Say Y if you have such a device.
+ Ultrabook platforms. This is a recommended option.
+ Say Y or m if you have such a device.
If unsure select "N".
config SND_SOC_INTEL_BDW_RT5677_MACH
tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
depends on X86_INTEL_LPSS && GPIOLIB && I2C
- depends on SND_SOC_INTEL_HASWELL
select SND_SOC_RT5677
help
This adds support for Intel Broadwell platform based boards with
- the RT5677 audio codec.
+ the RT5677 audio codec. This is a recommended option.
+ Say Y or m if you have such a device.
+ If unsure select "N".
config SND_SOC_INTEL_BROADWELL_MACH
tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on SND_SOC_INTEL_HASWELL
select SND_SOC_RT286
help
This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
Ultrabook platforms.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
+endif
+
+if SND_SOC_INTEL_BAYTRAIL
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
+ default n
depends on X86_INTEL_LPSS && I2C
- depends on SND_SST_IPC_ACPI = n
- depends on SND_SOC_INTEL_BAYTRAIL
select SND_SOC_MAX98090
help
This adds audio driver for Intel Baytrail platform based boards
- with the MAX98090 audio codec.
+ with the MAX98090 audio codec. This driver is deprecated, use
+ SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH instead for better
+ functionality.
config SND_SOC_INTEL_BYT_RT5640_MACH
tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
+ default n
depends on X86_INTEL_LPSS && I2C
- depends on SND_SST_IPC_ACPI = n
- depends on SND_SOC_INTEL_BAYTRAIL
select SND_SOC_RT5640
help
This adds audio driver for Intel Baytrail platform based boards
with the RT5640 audio codec. This driver is deprecated, use
SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
+endif
+
+if SND_SST_ATOM_HIFI2_PLATFORM
+
config SND_SOC_INTEL_BYTCR_RT5640_MACH
tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec"
depends on X86 && I2C && ACPI
select SND_SOC_RT5640
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
platforms with RT5640 audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYTCR_RT5651_MACH
tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
depends on X86 && I2C && ACPI
select SND_SOC_RT5651
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
platforms with RT5651 audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_RT5670
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
platforms with RT5672 audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_RT5645
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
platforms with RT5645/5650 audio codec.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
@@ -121,63 +133,68 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_MAX98090
select SND_SOC_TS3A227E
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell
platforms with MAX98090 audio codec it also can support TI jack chip as aux device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_DA7213
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail
platforms with DA7212/7213 audio codec.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_ES8316
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail &
Cherrytrail platforms with ES8316 audio codec.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)"
+ default n
depends on X86_INTEL_LPSS && I2C && ACPI
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for the MinnowBoard Max or
Up boards and provides access to I2S signals on the Low-Speed
- connector
+ connector. This is not a recommended option outside of these cases.
+ It is not intended to be enabled by distros by default.
+ Say Y or m if you have such a device.
+
If unsure select "N".
+endif
+
+if SND_SOC_INTEL_SKYLAKE
+
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "ASoC Audio driver for SKL with RT286 I2S mode"
depends on X86 && ACPI && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT286
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
help
This adds support for ASoC machine driver for Skylake platforms
with RT286 I2S audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device.
If unsure select "N".
config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode"
depends on X86_INTEL_LPSS && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_NAU8825
select SND_SOC_SSM4567
select SND_SOC_DMIC
@@ -185,13 +202,12 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for NAU88L25 + SSM4567.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode"
depends on X86_INTEL_LPSS && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_NAU8825
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -199,13 +215,12 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for NAU88L25 + MAX98357A.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode"
depends on X86 && ACPI && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -214,13 +229,12 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
help
This adds support for ASoC machine driver for Broxton-P platforms
with DA7219 + MAX98357A I2S audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BXT_RT298_MACH
tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
depends on X86 && ACPI && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT298
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -228,14 +242,13 @@ config SND_SOC_INTEL_BXT_RT298_MACH
help
This adds support for ASoC machine driver for Broxton platforms
with RT286 I2S audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode"
depends on X86_INTEL_LPSS && I2C
select SND_SOC_INTEL_SST
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT5663
select SND_SOC_MAX98927
select SND_SOC_DMIC
@@ -243,14 +256,13 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for RT5663 + MAX98927.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode"
depends on X86_INTEL_LPSS && I2C && SPI
select SND_SOC_INTEL_SST
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT5663
select SND_SOC_RT5514
select SND_SOC_RT5514_SPI
@@ -259,7 +271,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for RT5663 + RT5514 + MAX98927.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
+endif
endif
--
2.14.1
next prev parent reply other threads:[~2017-11-18 0:02 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-18 0:01 [RFC PATCH 0/7] Fix Intel audio Kconfig issues Pierre-Louis Bossart
2017-11-18 0:01 ` Pierre-Louis Bossart
2017-11-18 0:01 ` Pierre-Louis Bossart [this message]
2017-11-18 16:49 ` [RFC PATCH 1/7] ASoC: Intel: Fix Kconfig Takashi Iwai
2017-11-18 16:49 ` Takashi Iwai
2017-11-20 16:18 ` [alsa-devel] " Pierre-Louis Bossart
2017-11-20 16:18 ` Pierre-Louis Bossart
2017-11-21 17:07 ` [alsa-devel] " Takashi Iwai
2017-11-21 17:07 ` Takashi Iwai
2017-11-21 21:31 ` [alsa-devel] " Pierre-Louis Bossart
2017-11-18 0:01 ` [RFC PATCH 2/7] ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies Pierre-Louis Bossart
2017-11-18 0:01 ` Pierre-Louis Bossart
2017-11-18 16:53 ` Andy Shevchenko
2017-11-18 16:53 ` Andy Shevchenko
2017-11-18 16:55 ` Shevchenko, Andriy
2017-11-18 16:55 ` Shevchenko, Andriy
2017-11-20 16:23 ` [alsa-devel] " Pierre-Louis Bossart
2017-11-20 16:58 ` Alan Cox
2017-11-20 16:58 ` Alan Cox
2017-11-21 12:05 ` [alsa-devel] " Andy Shevchenko
2017-11-20 15:23 ` Alan Cox
2017-11-18 0:01 ` [RFC PATCH 3/7] ASoC: Intel: document what Kconfig options do Pierre-Louis Bossart
2017-11-18 0:01 ` Pierre-Louis Bossart
2017-11-21 17:09 ` [alsa-devel] " Takashi Iwai
2017-11-21 17:09 ` Takashi Iwai
2017-11-21 21:32 ` [alsa-devel] " Pierre-Louis Bossart
2017-11-21 21:32 ` Pierre-Louis Bossart
2017-11-18 0:01 ` [RFC PATCH 4/7] ASoC: Intel: Fix nested/unnecessary Kconfig dependencies Pierre-Louis Bossart
2017-11-18 0:01 ` Pierre-Louis Bossart
2017-11-18 0:02 ` [RFC PATCH 5/7] ASoC: Intel: boards: align Kconfig dependencies for Haswell/Broadwell Pierre-Louis Bossart
2018-01-08 16:22 ` Applied "ASoC: Intel: boards: align Kconfig dependencies for Haswell/Broadwell" to the asoc tree Mark Brown
2018-01-08 16:22 ` Mark Brown
2017-11-18 0:02 ` [RFC PATCH 6/7] ASoC: Intel: boards: align Kconfig configurations for HiFi2 Pierre-Louis Bossart
2017-11-18 0:02 ` Pierre-Louis Bossart
2017-11-18 17:08 ` Andy Shevchenko
2017-11-18 17:08 ` Andy Shevchenko
2017-11-20 16:27 ` [alsa-devel] " Pierre-Louis Bossart
2017-11-20 16:27 ` Pierre-Louis Bossart
2017-11-18 0:02 ` [RFC PATCH 7/7] ASoC: Intel: boards: align/fix SKL/BXT/KBL Kconfigs Pierre-Louis Bossart
2017-11-18 0:02 ` Pierre-Louis Bossart
2017-11-18 17:14 ` Andy Shevchenko
2017-11-18 17:14 ` Andy Shevchenko
2017-11-18 0:09 ` [RFC PATCH 0/7] Fix Intel audio Kconfig issues Linus Torvalds
2017-11-18 0:09 ` Linus Torvalds
2017-11-18 9:25 ` Takashi Iwai
2017-11-18 9:25 ` Takashi Iwai
2017-11-20 13:28 ` Arnd Bergmann
2017-11-20 13:28 ` Arnd Bergmann
2017-11-21 17:10 ` Takashi Iwai
2017-11-21 21:36 ` [alsa-devel] " Pierre-Louis Bossart
2017-11-22 11:54 ` Mark Brown
2017-11-22 11:54 ` Mark Brown
2017-11-27 14:40 ` [alsa-devel] " Pierre-Louis Bossart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171118000202.22302-2-pierre-louis.bossart@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tiwai@suse.de \
--cc=torvalds@linux-foundation.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.