* [PATCH v5 0/4] add clk controller driver for Meson-AXG SoC
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
Add driver for the clk controller which found in Meson AXG SoC
Note, we deliberately create a seperate source file for the Meson AXG
series, instead of sharing code with previous GXBB/GXL - the file axg.c
It would help us maintaining the code more easily.
Changes since v4 [4]:
- use devm_ioremap instead of devm_ioremap_resource
- rename DT node using generic name 'bus'
Changes since v3 [3]:
- separate dt-bindings header file
- adjust license note as standard way
- replace of_iomap with platform/devm API
- add Rob's Ack to Patch 1,4
Changes since v2 [2]:
- drop register offset calculation
- update dt-bindings for new compatible variant
Changes since v1 [1]:
- rework register definion, use '(offset << 2)' to better match
the description from data sheet
- drop "#include dt-bindings/clock/gxbb-aoclkc.h" from dts
- rebase code to v4.15-rc1
[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005522.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005525.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005526.html
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005487.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005488.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005489.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005490.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005468.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005469.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005470.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005239.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005240.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005241.html
Qiufang Dai (3):
clk: meson-axg: add clocks dt-bindings required header
clk: meson-axg: add clock controller drivers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Yixun Lan (1):
dt-bindings: clock: add compatible variant for the Meson-AXG
.../bindings/clock/amlogic,gxbb-clkc.txt | 7 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++
drivers/clk/meson/axg.h | 126 +++
include/dt-bindings/clock/axg-clkc.h | 71 ++
8 files changed, 1171 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
create mode 100644 include/dt-bindings/clock/axg-clkc.h
--
2.15.0
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 0/4] add clk controller driver for Meson-AXG SoC
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
Add driver for the clk controller which found in Meson AXG SoC
Note, we deliberately create a seperate source file for the Meson AXG
series, instead of sharing code with previous GXBB/GXL - the file axg.c
It would help us maintaining the code more easily.
Changes since v4 [4]:
- use devm_ioremap instead of devm_ioremap_resource
- rename DT node using generic name 'bus'
Changes since v3 [3]:
- separate dt-bindings header file
- adjust license note as standard way
- replace of_iomap with platform/devm API
- add Rob's Ack to Patch 1,4
Changes since v2 [2]:
- drop register offset calculation
- update dt-bindings for new compatible variant
Changes since v1 [1]:
- rework register definion, use '(offset << 2)' to better match
the description from data sheet
- drop "#include dt-bindings/clock/gxbb-aoclkc.h" from dts
- rebase code to v4.15-rc1
[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005522.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005525.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005526.html
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005487.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005488.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005489.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005490.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005468.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005469.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005470.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005239.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005240.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005241.html
Qiufang Dai (3):
clk: meson-axg: add clocks dt-bindings required header
clk: meson-axg: add clock controller drivers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Yixun Lan (1):
dt-bindings: clock: add compatible variant for the Meson-AXG
.../bindings/clock/amlogic,gxbb-clkc.txt | 7 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++
drivers/clk/meson/axg.h | 126 +++
include/dt-bindings/clock/axg-clkc.h | 71 ++
8 files changed, 1171 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
create mode 100644 include/dt-bindings/clock/axg-clkc.h
--
2.15.0
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 0/4] add clk controller driver for Meson-AXG SoC
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linux-arm-kernel
Add driver for the clk controller which found in Meson AXG SoC
Note, we deliberately create a seperate source file for the Meson AXG
series, instead of sharing code with previous GXBB/GXL - the file axg.c
It would help us maintaining the code more easily.
Changes since v4 [4]:
- use devm_ioremap instead of devm_ioremap_resource
- rename DT node using generic name 'bus'
Changes since v3 [3]:
- separate dt-bindings header file
- adjust license note as standard way
- replace of_iomap with platform/devm API
- add Rob's Ack to Patch 1,4
Changes since v2 [2]:
- drop register offset calculation
- update dt-bindings for new compatible variant
Changes since v1 [1]:
- rework register definion, use '(offset << 2)' to better match
the description from data sheet
- drop "#include dt-bindings/clock/gxbb-aoclkc.h" from dts
- rebase code to v4.15-rc1
[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005522.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005525.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005526.html
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005487.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005488.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005489.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005490.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005468.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005469.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005470.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005239.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005240.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005241.html
Qiufang Dai (3):
clk: meson-axg: add clocks dt-bindings required header
clk: meson-axg: add clock controller drivers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Yixun Lan (1):
dt-bindings: clock: add compatible variant for the Meson-AXG
.../bindings/clock/amlogic,gxbb-clkc.txt | 7 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++
drivers/clk/meson/axg.h | 126 +++
include/dt-bindings/clock/axg-clkc.h | 71 ++
8 files changed, 1171 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
create mode 100644 include/dt-bindings/clock/axg-clkc.h
--
2.15.0
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 0/4] add clk controller driver for Meson-AXG SoC
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linus-amlogic
Add driver for the clk controller which found in Meson AXG SoC
Note, we deliberately create a seperate source file for the Meson AXG
series, instead of sharing code with previous GXBB/GXL - the file axg.c
It would help us maintaining the code more easily.
Changes since v4 [4]:
- use devm_ioremap instead of devm_ioremap_resource
- rename DT node using generic name 'bus'
Changes since v3 [3]:
- separate dt-bindings header file
- adjust license note as standard way
- replace of_iomap with platform/devm API
- add Rob's Ack to Patch 1,4
Changes since v2 [2]:
- drop register offset calculation
- update dt-bindings for new compatible variant
Changes since v1 [1]:
- rework register definion, use '(offset << 2)' to better match
the description from data sheet
- drop "#include dt-bindings/clock/gxbb-aoclkc.h" from dts
- rebase code to v4.15-rc1
[4]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005522.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005525.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005526.html
[3]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005487.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005488.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005489.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005490.html
[2]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005468.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005469.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005470.html
[1]
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005239.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005240.html
http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005241.html
Qiufang Dai (3):
clk: meson-axg: add clocks dt-bindings required header
clk: meson-axg: add clock controller drivers
arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
Yixun Lan (1):
dt-bindings: clock: add compatible variant for the Meson-AXG
.../bindings/clock/amlogic,gxbb-clkc.txt | 7 +-
arch/arm64/Kconfig.platforms | 1 +
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++
drivers/clk/meson/axg.h | 126 +++
include/dt-bindings/clock/axg-clkc.h | 71 ++
8 files changed, 1171 insertions(+), 2 deletions(-)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
create mode 100644 include/dt-bindings/clock/axg-clkc.h
--
2.15.0
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 1/4] dt-bindings: clock: add compatible variant for the Meson-AXG
2017-12-07 9:52 ` Yixun Lan
(?)
(?)
@ 2017-12-07 9:52 ` Yixun Lan
-1 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 924040769186..e2b377ed6f91 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,8 +5,11 @@ controllers within the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
- or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+
- reg: physical base address of the clock controller and length of memory
mapped region.
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 1/4] dt-bindings: clock: add compatible variant for the Meson-AXG
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Mark Rutland, devicetree, Yixun Lan, Michael Turquette,
Stephen Boyd, linux-kernel, Qiufang Dai, Rob Herring, Jian Hu,
Carlo Caione, linux-amlogic, linux-clk, linux-arm-kernel
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 924040769186..e2b377ed6f91 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,8 +5,11 @@ controllers within the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
- or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+
- reg: physical base address of the clock controller and length of memory
mapped region.
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 1/4] dt-bindings: clock: add compatible variant for the Meson-AXG
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linux-arm-kernel
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 924040769186..e2b377ed6f91 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,8 +5,11 @@ controllers within the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
- or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+
- reg: physical base address of the clock controller and length of memory
mapped region.
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 1/4] dt-bindings: clock: add compatible variant for the Meson-AXG
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linus-amlogic
Update the documentation to support clock driver for the Amlogic's
Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index 924040769186..e2b377ed6f91 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -5,8 +5,11 @@ controllers within the SoC.
Required Properties:
-- compatible: should be "amlogic,gxbb-clkc" for GXBB SoC,
- or "amlogic,gxl-clkc" for GXL and GXM SoC.
+- compatible: should be:
+ "amlogic,gxbb-clkc" for GXBB SoC,
+ "amlogic,gxl-clkc" for GXL and GXM SoC,
+ "amlogic,axg-clkc" for AXG SoC.
+
- reg: physical base address of the clock controller and length of memory
mapped region.
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
2017-12-07 9:52 ` Yixun Lan
(?)
(?)
@ 2017-12-07 9:52 ` Yixun Lan
-1 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-clkc.h
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
new file mode 100644
index 000000000000..941ac70e7f30
--- /dev/null
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-AXG clock tree IDs
+ *
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AXG_CLKC_H
+#define __AXG_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_AUDIO_LOCKER 16
+#define CLKID_MIPI_DSI_HOST 17
+#define CLKID_ISA 18
+#define CLKID_PL301 19
+#define CLKID_PERIPHS 20
+#define CLKID_SPICC0 21
+#define CLKID_I2C 22
+#define CLKID_RNG0 23
+#define CLKID_UART0 24
+#define CLKID_MIPI_DSI_PHY 25
+#define CLKID_SPICC1 26
+#define CLKID_PCIE_A 27
+#define CLKID_PCIE_B 28
+#define CLKID_HIU_IFACE 29
+#define CLKID_ASSIST_MISC 30
+#define CLKID_SD_EMMC_B 31
+#define CLKID_SD_EMMC_C 32
+#define CLKID_DMA 33
+#define CLKID_SPI 34
+#define CLKID_AUDIO 35
+#define CLKID_ETH 36
+#define CLKID_UART1 37
+#define CLKID_G2D 38
+#define CLKID_USB0 39
+#define CLKID_USB1 40
+#define CLKID_RESET 41
+#define CLKID_USB 42
+#define CLKID_AHB_ARB0 43
+#define CLKID_EFUSE 44
+#define CLKID_BOOT_ROM 45
+#define CLKID_AHB_DATA_BUS 46
+#define CLKID_AHB_CTRL_BUS 47
+#define CLKID_USB1_DDR_BRIDGE 48
+#define CLKID_USB0_DDR_BRIDGE 49
+#define CLKID_MMC_PCLK 50
+#define CLKID_VPU_INTR 51
+#define CLKID_SEC_AHB_AHB3_BRIDGE 52
+#define CLKID_GIC 53
+#define CLKID_AO_MEDIA_CPU 54
+#define CLKID_AO_AHB_SRAM 55
+#define CLKID_AO_AHB_BUS 56
+#define CLKID_AO_IFACE 57
+#define CLKID_AO_I2C 58
+#define CLKID_SD_EMMC_B_CLK0 59
+#define CLKID_SD_EMMC_C_CLK0 60
+
+#endif /* __AXG_CLKC_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-clkc.h
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
new file mode 100644
index 000000000000..941ac70e7f30
--- /dev/null
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-AXG clock tree IDs
+ *
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AXG_CLKC_H
+#define __AXG_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_AUDIO_LOCKER 16
+#define CLKID_MIPI_DSI_HOST 17
+#define CLKID_ISA 18
+#define CLKID_PL301 19
+#define CLKID_PERIPHS 20
+#define CLKID_SPICC0 21
+#define CLKID_I2C 22
+#define CLKID_RNG0 23
+#define CLKID_UART0 24
+#define CLKID_MIPI_DSI_PHY 25
+#define CLKID_SPICC1 26
+#define CLKID_PCIE_A 27
+#define CLKID_PCIE_B 28
+#define CLKID_HIU_IFACE 29
+#define CLKID_ASSIST_MISC 30
+#define CLKID_SD_EMMC_B 31
+#define CLKID_SD_EMMC_C 32
+#define CLKID_DMA 33
+#define CLKID_SPI 34
+#define CLKID_AUDIO 35
+#define CLKID_ETH 36
+#define CLKID_UART1 37
+#define CLKID_G2D 38
+#define CLKID_USB0 39
+#define CLKID_USB1 40
+#define CLKID_RESET 41
+#define CLKID_USB 42
+#define CLKID_AHB_ARB0 43
+#define CLKID_EFUSE 44
+#define CLKID_BOOT_ROM 45
+#define CLKID_AHB_DATA_BUS 46
+#define CLKID_AHB_CTRL_BUS 47
+#define CLKID_USB1_DDR_BRIDGE 48
+#define CLKID_USB0_DDR_BRIDGE 49
+#define CLKID_MMC_PCLK 50
+#define CLKID_VPU_INTR 51
+#define CLKID_SEC_AHB_AHB3_BRIDGE 52
+#define CLKID_GIC 53
+#define CLKID_AO_MEDIA_CPU 54
+#define CLKID_AO_AHB_SRAM 55
+#define CLKID_AO_AHB_BUS 56
+#define CLKID_AO_IFACE 57
+#define CLKID_AO_I2C 58
+#define CLKID_SD_EMMC_B_CLK0 59
+#define CLKID_SD_EMMC_C_CLK0 60
+
+#endif /* __AXG_CLKC_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-clkc.h
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
new file mode 100644
index 000000000000..941ac70e7f30
--- /dev/null
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-AXG clock tree IDs
+ *
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AXG_CLKC_H
+#define __AXG_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_AUDIO_LOCKER 16
+#define CLKID_MIPI_DSI_HOST 17
+#define CLKID_ISA 18
+#define CLKID_PL301 19
+#define CLKID_PERIPHS 20
+#define CLKID_SPICC0 21
+#define CLKID_I2C 22
+#define CLKID_RNG0 23
+#define CLKID_UART0 24
+#define CLKID_MIPI_DSI_PHY 25
+#define CLKID_SPICC1 26
+#define CLKID_PCIE_A 27
+#define CLKID_PCIE_B 28
+#define CLKID_HIU_IFACE 29
+#define CLKID_ASSIST_MISC 30
+#define CLKID_SD_EMMC_B 31
+#define CLKID_SD_EMMC_C 32
+#define CLKID_DMA 33
+#define CLKID_SPI 34
+#define CLKID_AUDIO 35
+#define CLKID_ETH 36
+#define CLKID_UART1 37
+#define CLKID_G2D 38
+#define CLKID_USB0 39
+#define CLKID_USB1 40
+#define CLKID_RESET 41
+#define CLKID_USB 42
+#define CLKID_AHB_ARB0 43
+#define CLKID_EFUSE 44
+#define CLKID_BOOT_ROM 45
+#define CLKID_AHB_DATA_BUS 46
+#define CLKID_AHB_CTRL_BUS 47
+#define CLKID_USB1_DDR_BRIDGE 48
+#define CLKID_USB0_DDR_BRIDGE 49
+#define CLKID_MMC_PCLK 50
+#define CLKID_VPU_INTR 51
+#define CLKID_SEC_AHB_AHB3_BRIDGE 52
+#define CLKID_GIC 53
+#define CLKID_AO_MEDIA_CPU 54
+#define CLKID_AO_AHB_SRAM 55
+#define CLKID_AO_AHB_BUS 56
+#define CLKID_AO_IFACE 57
+#define CLKID_AO_I2C 58
+#define CLKID_SD_EMMC_B_CLK0 59
+#define CLKID_SD_EMMC_C_CLK0 60
+
+#endif /* __AXG_CLKC_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linus-amlogic
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
create mode 100644 include/dt-bindings/clock/axg-clkc.h
diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h
new file mode 100644
index 000000000000..941ac70e7f30
--- /dev/null
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Meson-AXG clock tree IDs
+ *
+ * Copyright (c) 2017 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __AXG_CLKC_H
+#define __AXG_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_AUDIO_LOCKER 16
+#define CLKID_MIPI_DSI_HOST 17
+#define CLKID_ISA 18
+#define CLKID_PL301 19
+#define CLKID_PERIPHS 20
+#define CLKID_SPICC0 21
+#define CLKID_I2C 22
+#define CLKID_RNG0 23
+#define CLKID_UART0 24
+#define CLKID_MIPI_DSI_PHY 25
+#define CLKID_SPICC1 26
+#define CLKID_PCIE_A 27
+#define CLKID_PCIE_B 28
+#define CLKID_HIU_IFACE 29
+#define CLKID_ASSIST_MISC 30
+#define CLKID_SD_EMMC_B 31
+#define CLKID_SD_EMMC_C 32
+#define CLKID_DMA 33
+#define CLKID_SPI 34
+#define CLKID_AUDIO 35
+#define CLKID_ETH 36
+#define CLKID_UART1 37
+#define CLKID_G2D 38
+#define CLKID_USB0 39
+#define CLKID_USB1 40
+#define CLKID_RESET 41
+#define CLKID_USB 42
+#define CLKID_AHB_ARB0 43
+#define CLKID_EFUSE 44
+#define CLKID_BOOT_ROM 45
+#define CLKID_AHB_DATA_BUS 46
+#define CLKID_AHB_CTRL_BUS 47
+#define CLKID_USB1_DDR_BRIDGE 48
+#define CLKID_USB0_DDR_BRIDGE 49
+#define CLKID_MMC_PCLK 50
+#define CLKID_VPU_INTR 51
+#define CLKID_SEC_AHB_AHB3_BRIDGE 52
+#define CLKID_GIC 53
+#define CLKID_AO_MEDIA_CPU 54
+#define CLKID_AO_AHB_SRAM 55
+#define CLKID_AO_AHB_BUS 56
+#define CLKID_AO_IFACE 57
+#define CLKID_AO_I2C 58
+#define CLKID_SD_EMMC_B_CLK0 59
+#define CLKID_SD_EMMC_C_CLK0 60
+
+#endif /* __AXG_CLKC_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 3/4] clk: meson-axg: add clock controller drivers
2017-12-07 9:52 ` Yixun Lan
(?)
(?)
@ 2017-12-07 9:52 ` Yixun Lan
-1 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add clock controller drivers for Amlogic Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg.h | 126 ++++++
5 files changed, 1080 insertions(+)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@ config ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select COMMON_CLK_AXG
select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+ bool
+ depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
+ help
+ Support for the clock controller on AmLogic A113D devices, aka axg.
+ Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+ PLL_RATE(24000000, 56, 1, 2),
+ PLL_RATE(48000000, 64, 1, 2),
+ PLL_RATE(72000000, 72, 1, 2),
+ PLL_RATE(96000000, 64, 1, 2),
+ PLL_RATE(120000000, 80, 1, 2),
+ PLL_RATE(144000000, 96, 1, 2),
+ PLL_RATE(168000000, 56, 1, 1),
+ PLL_RATE(192000000, 64, 1, 1),
+ PLL_RATE(216000000, 72, 1, 1),
+ PLL_RATE(240000000, 80, 1, 1),
+ PLL_RATE(264000000, 88, 1, 1),
+ PLL_RATE(288000000, 96, 1, 1),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(408000000, 68, 1, 2),
+ PLL_RATE(432000000, 72, 1, 2),
+ PLL_RATE(456000000, 76, 1, 2),
+ PLL_RATE(480000000, 80, 1, 2),
+ PLL_RATE(504000000, 84, 1, 2),
+ PLL_RATE(528000000, 88, 1, 2),
+ PLL_RATE(552000000, 92, 1, 2),
+ PLL_RATE(576000000, 96, 1, 2),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(840000000, 70, 1, 1),
+ PLL_RATE(864000000, 72, 1, 1),
+ PLL_RATE(888000000, 74, 1, 1),
+ PLL_RATE(912000000, 76, 1, 1),
+ PLL_RATE(936000000, 78, 1, 1),
+ PLL_RATE(960000000, 80, 1, 1),
+ PLL_RATE(984000000, 82, 1, 1),
+ PLL_RATE(1008000000, 84, 1, 1),
+ PLL_RATE(1032000000, 86, 1, 1),
+ PLL_RATE(1056000000, 88, 1, 1),
+ PLL_RATE(1080000000, 90, 1, 1),
+ PLL_RATE(1104000000, 92, 1, 1),
+ PLL_RATE(1128000000, 94, 1, 1),
+ PLL_RATE(1152000000, 96, 1, 1),
+ PLL_RATE(1176000000, 98, 1, 1),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ PLL_RATE(1656000000, 68, 1, 0),
+ PLL_RATE(1680000000, 68, 1, 0),
+ PLL_RATE(1704000000, 68, 1, 0),
+ PLL_RATE(1728000000, 69, 1, 0),
+ PLL_RATE(1752000000, 69, 1, 0),
+ PLL_RATE(1776000000, 69, 1, 0),
+ PLL_RATE(1800000000, 69, 1, 0),
+ PLL_RATE(1824000000, 70, 1, 0),
+ PLL_RATE(1848000000, 70, 1, 0),
+ PLL_RATE(1872000000, 70, 1, 0),
+ PLL_RATE(1896000000, 70, 1, 0),
+ PLL_RATE(1920000000, 71, 1, 0),
+ PLL_RATE(1944000000, 71, 1, 0),
+ PLL_RATE(1968000000, 71, 1, 0),
+ PLL_RATE(1992000000, 71, 1, 0),
+ PLL_RATE(2016000000, 72, 1, 0),
+ PLL_RATE(2040000000, 72, 1, 0),
+ PLL_RATE(2064000000, 72, 1, 0),
+ PLL_RATE(2088000000, 72, 1, 0),
+ PLL_RATE(2112000000, 73, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .rate_table = sys_pll_rate_table,
+ .rate_count = ARRAY_SIZE(sys_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+ PLL_RATE(240000000, 40, 1, 2),
+ PLL_RATE(246000000, 41, 1, 2),
+ PLL_RATE(252000000, 42, 1, 2),
+ PLL_RATE(258000000, 43, 1, 2),
+ PLL_RATE(264000000, 44, 1, 2),
+ PLL_RATE(270000000, 45, 1, 2),
+ PLL_RATE(276000000, 46, 1, 2),
+ PLL_RATE(282000000, 47, 1, 2),
+ PLL_RATE(288000000, 48, 1, 2),
+ PLL_RATE(294000000, 49, 1, 2),
+ PLL_RATE(300000000, 50, 1, 2),
+ PLL_RATE(306000000, 51, 1, 2),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(318000000, 53, 1, 2),
+ PLL_RATE(324000000, 54, 1, 2),
+ PLL_RATE(330000000, 55, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(342000000, 57, 1, 2),
+ PLL_RATE(348000000, 58, 1, 2),
+ PLL_RATE(354000000, 59, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(366000000, 61, 1, 2),
+ PLL_RATE(372000000, 62, 1, 2),
+ PLL_RATE(378000000, 63, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(390000000, 65, 1, 3),
+ PLL_RATE(396000000, 66, 1, 3),
+ PLL_RATE(402000000, 67, 1, 3),
+ PLL_RATE(408000000, 68, 1, 3),
+ PLL_RATE(480000000, 40, 1, 1),
+ PLL_RATE(492000000, 41, 1, 1),
+ PLL_RATE(504000000, 42, 1, 1),
+ PLL_RATE(516000000, 43, 1, 1),
+ PLL_RATE(528000000, 44, 1, 1),
+ PLL_RATE(540000000, 45, 1, 1),
+ PLL_RATE(552000000, 46, 1, 1),
+ PLL_RATE(564000000, 47, 1, 1),
+ PLL_RATE(576000000, 48, 1, 1),
+ PLL_RATE(588000000, 49, 1, 1),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(612000000, 51, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(636000000, 53, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(660000000, 55, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(684000000, 57, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(708000000, 59, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(732000000, 61, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(756000000, 63, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(780000000, 65, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(804000000, 67, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(960000000, 40, 1, 0),
+ PLL_RATE(984000000, 41, 1, 0),
+ PLL_RATE(1008000000, 42, 1, 0),
+ PLL_RATE(1032000000, 43, 1, 0),
+ PLL_RATE(1056000000, 44, 1, 0),
+ PLL_RATE(1080000000, 45, 1, 0),
+ PLL_RATE(1104000000, 46, 1, 0),
+ PLL_RATE(1128000000, 47, 1, 0),
+ PLL_RATE(1152000000, 48, 1, 0),
+ PLL_RATE(1176000000, 49, 1, 0),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ { /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+ PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+ PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+ PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+ PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+ PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+ PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .params = {
+ .params_table = axg_gp0_params_table,
+ .params_count = ARRAY_SIZE(axg_gp0_params_table),
+ .no_init_reset = true,
+ .reset_lock_loop = true,
+ },
+ .rate_table = axg_gp0_pll_rate_table,
+ .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+ .sdm = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 12,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 11,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 2,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 0,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+ "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+ "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_READ_ONLY,
+ .table = mux_table_clk81,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_sel",
+ .ops = &clk_mux_ro_ops,
+ /*
+ * bits 14:12 selects from 8 possible parents:
+ * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+ * fclk_div4, fclk_div3, fclk_div5
+ */
+ .parent_names = clk81_parent_names,
+ .num_parents = ARRAY_SIZE(clk81_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_clk81 = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "clk81",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_div" },
+ .num_parents = 1,
+ .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+ },
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+ "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+ /*
+ * Following these parent clocks, we should also have had mpll2, mpll3
+ * and gp0_pll but these clocks are too precious to be used here. All
+ * the necessary rates for MMC and NAND operation can be acheived using
+ * xtal or fclk_div clocks
+ */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .bit_idx = 23,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &axg_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
+ [CLKID_GP0_PLL] = &axg_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &axg_clk81.hw,
+ [CLKID_MPLL0] = &axg_mpll0.hw,
+ [CLKID_MPLL1] = &axg_mpll1.hw,
+ [CLKID_MPLL2] = &axg_mpll2.hw,
+ [CLKID_MPLL3] = &axg_mpll3.hw,
+ [CLKID_DDR] = &axg_ddr.hw,
+ [CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
+ [CLKID_ISA] = &axg_isa.hw,
+ [CLKID_PL301] = &axg_pl301.hw,
+ [CLKID_PERIPHS] = &axg_periphs.hw,
+ [CLKID_SPICC0] = &axg_spicc_0.hw,
+ [CLKID_I2C] = &axg_i2c.hw,
+ [CLKID_RNG0] = &axg_rng0.hw,
+ [CLKID_UART0] = &axg_uart0.hw,
+ [CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
+ [CLKID_SPICC1] = &axg_spicc_1.hw,
+ [CLKID_PCIE_A] = &axg_pcie_a.hw,
+ [CLKID_PCIE_B] = &axg_pcie_b.hw,
+ [CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
+ [CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
+ [CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
+ [CLKID_DMA] = &axg_dma.hw,
+ [CLKID_SPI] = &axg_spi.hw,
+ [CLKID_AUDIO] = &axg_audio.hw,
+ [CLKID_ETH] = &axg_eth_core.hw,
+ [CLKID_UART1] = &axg_uart1.hw,
+ [CLKID_G2D] = &axg_g2d.hw,
+ [CLKID_USB0] = &axg_usb0.hw,
+ [CLKID_USB1] = &axg_usb1.hw,
+ [CLKID_RESET] = &axg_reset.hw,
+ [CLKID_USB] = &axg_usb_general.hw,
+ [CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
+ [CLKID_EFUSE] = &axg_efuse.hw,
+ [CLKID_BOOT_ROM] = &axg_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
+ [CLKID_VPU_INTR] = &axg_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
+ [CLKID_GIC] = &axg_gic.hw,
+ [CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &axg_ao_iface.hw,
+ [CLKID_AO_I2C] = &axg_ao_i2c.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+ &axg_mpll0,
+ &axg_mpll1,
+ &axg_mpll2,
+ &axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+ &axg_clk81,
+ &axg_ddr,
+ &axg_audio_locker,
+ &axg_mipi_dsi_host,
+ &axg_isa,
+ &axg_pl301,
+ &axg_periphs,
+ &axg_spicc_0,
+ &axg_i2c,
+ &axg_rng0,
+ &axg_uart0,
+ &axg_mipi_dsi_phy,
+ &axg_spicc_1,
+ &axg_pcie_a,
+ &axg_pcie_b,
+ &axg_hiu_reg,
+ &axg_assist_misc,
+ &axg_emmc_b,
+ &axg_emmc_c,
+ &axg_dma,
+ &axg_spi,
+ &axg_audio,
+ &axg_eth_core,
+ &axg_uart1,
+ &axg_g2d,
+ &axg_usb0,
+ &axg_usb1,
+ &axg_reset,
+ &axg_usb_general,
+ &axg_ahb_arb0,
+ &axg_efuse,
+ &axg_boot_rom,
+ &axg_ahb_data_bus,
+ &axg_ahb_ctrl_bus,
+ &axg_usb1_to_ddr,
+ &axg_usb0_to_ddr,
+ &axg_mmc_pclk,
+ &axg_vpu_intr,
+ &axg_sec_ahb_ahb3_bridge,
+ &axg_gic,
+ &axg_ao_media_cpu,
+ &axg_ao_ahb_sram,
+ &axg_ao_ahb_bus,
+ &axg_ao_iface,
+ &axg_ao_i2c,
+ &axg_sd_emmc_b_clk0,
+ &axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+ &axg_mpeg_clk_sel,
+ &axg_sd_emmc_b_clk0_sel,
+ &axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+ &axg_mpeg_clk_div,
+ &axg_sd_emmc_b_clk0_div,
+ &axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+ struct clk_gate *const *clk_gates;
+ unsigned int clk_gates_count;
+ struct meson_clk_mpll *const *clk_mplls;
+ unsigned int clk_mplls_count;
+ struct meson_clk_pll *const *clk_plls;
+ unsigned int clk_plls_count;
+ struct clk_mux *const *clk_muxes;
+ unsigned int clk_muxes_count;
+ struct clk_divider *const *clk_dividers;
+ unsigned int clk_dividers_count;
+ struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+ .clk_gates = axg_clk_gates,
+ .clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+ .clk_mplls = axg_clk_mplls,
+ .clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+ .clk_plls = axg_clk_plls,
+ .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+ .clk_muxes = axg_clk_muxes,
+ .clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+ .clk_dividers = axg_clk_dividers,
+ .clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+ .hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ {}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct clkc_data *clkc_data;
+ struct resource *res;
+ void __iomem *clk_base;
+ int ret, clkid, i;
+
+ clkc_data = of_device_get_match_data(&pdev->dev);
+ if (!clkc_data)
+ return -EINVAL;
+
+ /* Generic clocks and PLLs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(clk_base)) {
+ dev_err(&pdev->dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }
+
+ /* Populate base address for PLLs */
+ for (i = 0; i < clkc_data->clk_plls_count; i++)
+ clkc_data->clk_plls[i]->base = clk_base;
+
+ /* Populate base address for MPLLs */
+ for (i = 0; i < clkc_data->clk_mplls_count; i++)
+ clkc_data->clk_mplls[i]->base = clk_base;
+
+ /* Populate base address for gates */
+ for (i = 0; i < clkc_data->clk_gates_count; i++)
+ clkc_data->clk_gates[i]->reg = clk_base +
+ (u64)clkc_data->clk_gates[i]->reg;
+
+ /* Populate base address for muxes */
+ for (i = 0; i < clkc_data->clk_muxes_count; i++)
+ clkc_data->clk_muxes[i]->reg = clk_base +
+ (u64)clkc_data->clk_muxes[i]->reg;
+
+ /* Populate base address for dividers */
+ for (i = 0; i < clkc_data->clk_dividers_count; i++)
+ clkc_data->clk_dividers[i]->reg = clk_base +
+ (u64)clkc_data->clk_dividers[i]->reg;
+
+ for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ /* array might be sparse */
+ if (!clkc_data->hw_onecell_data->hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev,
+ clkc_data->hw_onecell_data->hws[clkid]);
+ if (ret) {
+ dev_err(&pdev->dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+ .probe = axg_clkc_probe,
+ .driver = {
+ .name = "axg-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL 0x40
+#define HHI_GP0_PLL_CNTL2 0x44
+#define HHI_GP0_PLL_CNTL3 0x48
+#define HHI_GP0_PLL_CNTL4 0x4c
+#define HHI_GP0_PLL_CNTL5 0x50
+#define HHI_GP0_PLL_STS 0x54
+#define HHI_GP0_PLL_CNTL1 0x58
+#define HHI_HIFI_PLL_CNTL 0x80
+#define HHI_HIFI_PLL_CNTL2 0x84
+#define HHI_HIFI_PLL_CNTL3 0x88
+#define HHI_HIFI_PLL_CNTL4 0x8C
+#define HHI_HIFI_PLL_CNTL5 0x90
+#define HHI_HIFI_PLL_STS 0x94
+#define HHI_HIFI_PLL_CNTL1 0x98
+
+#define HHI_XTAL_DIVN_CNTL 0xbc
+#define HHI_GCLK2_MPEG0 0xc0
+#define HHI_GCLK2_MPEG1 0xc4
+#define HHI_GCLK2_MPEG2 0xc8
+#define HHI_GCLK2_OTHER 0xd0
+#define HHI_GCLK2_AO 0xd4
+#define HHI_PCIE_PLL_CNTL 0xd8
+#define HHI_PCIE_PLL_CNTL1 0xdC
+#define HHI_PCIE_PLL_CNTL2 0xe0
+#define HHI_PCIE_PLL_CNTL3 0xe4
+#define HHI_PCIE_PLL_CNTL4 0xe8
+#define HHI_PCIE_PLL_CNTL5 0xec
+#define HHI_PCIE_PLL_CNTL6 0xf0
+#define HHI_PCIE_PLL_STS 0xf4
+
+#define HHI_MEM_PD_REG0 0x100
+#define HHI_VPU_MEM_PD_REG0 0x104
+#define HHI_VIID_CLK_DIV 0x128
+#define HHI_VIID_CLK_CNTL 0x12c
+
+#define HHI_GCLK_MPEG0 0x140
+#define HHI_GCLK_MPEG1 0x144
+#define HHI_GCLK_MPEG2 0x148
+#define HHI_GCLK_OTHER 0x150
+#define HHI_GCLK_AO 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
+#define HHI_SYS_CPU_RESET_CNTL 0x160
+#define HHI_VID_CLK_DIV 0x164
+#define HHI_SPICC_HCLK_CNTL 0x168
+
+#define HHI_MPEG_CLK_CNTL 0x174
+#define HHI_VID_CLK_CNTL 0x17c
+#define HHI_TS_CLK_CNTL 0x190
+#define HHI_VID_CLK_CNTL2 0x194
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c
+#define HHI_VID_PLL_CLK_DIV 0x1a0
+#define HHI_VPU_CLK_CNTL 0x1bC
+
+#define HHI_VAPBCLK_CNTL 0x1F4
+
+#define HHI_GEN_CLK_CNTL 0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL 0x250
+#define HHI_NAND_CLK_CNTL 0x25C
+#define HHI_SD_EMMC_CLK_CNTL 0x264
+
+#define HHI_MPLL_CNTL 0x280
+#define HHI_MPLL_CNTL2 0x284
+#define HHI_MPLL_CNTL3 0x288
+#define HHI_MPLL_CNTL4 0x28C
+#define HHI_MPLL_CNTL5 0x290
+#define HHI_MPLL_CNTL6 0x294
+#define HHI_MPLL_CNTL7 0x298
+#define HHI_MPLL_CNTL8 0x29C
+#define HHI_MPLL_CNTL9 0x2A0
+#define HHI_MPLL_CNTL10 0x2A4
+
+#define HHI_MPLL3_CNTL0 0x2E0
+#define HHI_MPLL3_CNTL1 0x2E4
+#define HHI_PLL_TOP_MISC 0x2E8
+
+#define HHI_SYS_PLL_CNTL1 0x2FC
+#define HHI_SYS_PLL_CNTL 0x300
+#define HHI_SYS_PLL_CNTL2 0x304
+#define HHI_SYS_PLL_CNTL3 0x308
+#define HHI_SYS_PLL_CNTL4 0x30c
+#define HHI_SYS_PLL_CNTL5 0x310
+#define HHI_SYS_PLL_STS 0x314
+#define HHI_DPLL_TOP_I 0x318
+#define HHI_DPLL_TOP2_I 0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL 8
+#define CLKID_MPEG_DIV 9
+#define CLKID_SD_EMMC_B_CLK0_SEL 61
+#define CLKID_SD_EMMC_B_CLK0_DIV 62
+#define CLKID_SD_EMMC_C_CLK0_SEL 63
+#define CLKID_SD_EMMC_C_CLK0_DIV 64
+
+#define NR_CLKS 65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 3/4] clk: meson-axg: add clock controller drivers
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add clock controller drivers for Amlogic Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg.h | 126 ++++++
5 files changed, 1080 insertions(+)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@ config ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select COMMON_CLK_AXG
select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+ bool
+ depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
+ help
+ Support for the clock controller on AmLogic A113D devices, aka axg.
+ Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+ PLL_RATE(24000000, 56, 1, 2),
+ PLL_RATE(48000000, 64, 1, 2),
+ PLL_RATE(72000000, 72, 1, 2),
+ PLL_RATE(96000000, 64, 1, 2),
+ PLL_RATE(120000000, 80, 1, 2),
+ PLL_RATE(144000000, 96, 1, 2),
+ PLL_RATE(168000000, 56, 1, 1),
+ PLL_RATE(192000000, 64, 1, 1),
+ PLL_RATE(216000000, 72, 1, 1),
+ PLL_RATE(240000000, 80, 1, 1),
+ PLL_RATE(264000000, 88, 1, 1),
+ PLL_RATE(288000000, 96, 1, 1),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(408000000, 68, 1, 2),
+ PLL_RATE(432000000, 72, 1, 2),
+ PLL_RATE(456000000, 76, 1, 2),
+ PLL_RATE(480000000, 80, 1, 2),
+ PLL_RATE(504000000, 84, 1, 2),
+ PLL_RATE(528000000, 88, 1, 2),
+ PLL_RATE(552000000, 92, 1, 2),
+ PLL_RATE(576000000, 96, 1, 2),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(840000000, 70, 1, 1),
+ PLL_RATE(864000000, 72, 1, 1),
+ PLL_RATE(888000000, 74, 1, 1),
+ PLL_RATE(912000000, 76, 1, 1),
+ PLL_RATE(936000000, 78, 1, 1),
+ PLL_RATE(960000000, 80, 1, 1),
+ PLL_RATE(984000000, 82, 1, 1),
+ PLL_RATE(1008000000, 84, 1, 1),
+ PLL_RATE(1032000000, 86, 1, 1),
+ PLL_RATE(1056000000, 88, 1, 1),
+ PLL_RATE(1080000000, 90, 1, 1),
+ PLL_RATE(1104000000, 92, 1, 1),
+ PLL_RATE(1128000000, 94, 1, 1),
+ PLL_RATE(1152000000, 96, 1, 1),
+ PLL_RATE(1176000000, 98, 1, 1),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ PLL_RATE(1656000000, 68, 1, 0),
+ PLL_RATE(1680000000, 68, 1, 0),
+ PLL_RATE(1704000000, 68, 1, 0),
+ PLL_RATE(1728000000, 69, 1, 0),
+ PLL_RATE(1752000000, 69, 1, 0),
+ PLL_RATE(1776000000, 69, 1, 0),
+ PLL_RATE(1800000000, 69, 1, 0),
+ PLL_RATE(1824000000, 70, 1, 0),
+ PLL_RATE(1848000000, 70, 1, 0),
+ PLL_RATE(1872000000, 70, 1, 0),
+ PLL_RATE(1896000000, 70, 1, 0),
+ PLL_RATE(1920000000, 71, 1, 0),
+ PLL_RATE(1944000000, 71, 1, 0),
+ PLL_RATE(1968000000, 71, 1, 0),
+ PLL_RATE(1992000000, 71, 1, 0),
+ PLL_RATE(2016000000, 72, 1, 0),
+ PLL_RATE(2040000000, 72, 1, 0),
+ PLL_RATE(2064000000, 72, 1, 0),
+ PLL_RATE(2088000000, 72, 1, 0),
+ PLL_RATE(2112000000, 73, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .rate_table = sys_pll_rate_table,
+ .rate_count = ARRAY_SIZE(sys_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+ PLL_RATE(240000000, 40, 1, 2),
+ PLL_RATE(246000000, 41, 1, 2),
+ PLL_RATE(252000000, 42, 1, 2),
+ PLL_RATE(258000000, 43, 1, 2),
+ PLL_RATE(264000000, 44, 1, 2),
+ PLL_RATE(270000000, 45, 1, 2),
+ PLL_RATE(276000000, 46, 1, 2),
+ PLL_RATE(282000000, 47, 1, 2),
+ PLL_RATE(288000000, 48, 1, 2),
+ PLL_RATE(294000000, 49, 1, 2),
+ PLL_RATE(300000000, 50, 1, 2),
+ PLL_RATE(306000000, 51, 1, 2),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(318000000, 53, 1, 2),
+ PLL_RATE(324000000, 54, 1, 2),
+ PLL_RATE(330000000, 55, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(342000000, 57, 1, 2),
+ PLL_RATE(348000000, 58, 1, 2),
+ PLL_RATE(354000000, 59, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(366000000, 61, 1, 2),
+ PLL_RATE(372000000, 62, 1, 2),
+ PLL_RATE(378000000, 63, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(390000000, 65, 1, 3),
+ PLL_RATE(396000000, 66, 1, 3),
+ PLL_RATE(402000000, 67, 1, 3),
+ PLL_RATE(408000000, 68, 1, 3),
+ PLL_RATE(480000000, 40, 1, 1),
+ PLL_RATE(492000000, 41, 1, 1),
+ PLL_RATE(504000000, 42, 1, 1),
+ PLL_RATE(516000000, 43, 1, 1),
+ PLL_RATE(528000000, 44, 1, 1),
+ PLL_RATE(540000000, 45, 1, 1),
+ PLL_RATE(552000000, 46, 1, 1),
+ PLL_RATE(564000000, 47, 1, 1),
+ PLL_RATE(576000000, 48, 1, 1),
+ PLL_RATE(588000000, 49, 1, 1),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(612000000, 51, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(636000000, 53, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(660000000, 55, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(684000000, 57, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(708000000, 59, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(732000000, 61, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(756000000, 63, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(780000000, 65, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(804000000, 67, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(960000000, 40, 1, 0),
+ PLL_RATE(984000000, 41, 1, 0),
+ PLL_RATE(1008000000, 42, 1, 0),
+ PLL_RATE(1032000000, 43, 1, 0),
+ PLL_RATE(1056000000, 44, 1, 0),
+ PLL_RATE(1080000000, 45, 1, 0),
+ PLL_RATE(1104000000, 46, 1, 0),
+ PLL_RATE(1128000000, 47, 1, 0),
+ PLL_RATE(1152000000, 48, 1, 0),
+ PLL_RATE(1176000000, 49, 1, 0),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ { /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+ PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+ PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+ PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+ PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+ PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+ PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .params = {
+ .params_table = axg_gp0_params_table,
+ .params_count = ARRAY_SIZE(axg_gp0_params_table),
+ .no_init_reset = true,
+ .reset_lock_loop = true,
+ },
+ .rate_table = axg_gp0_pll_rate_table,
+ .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+ .sdm = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 12,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 11,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 2,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 0,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+ "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+ "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_READ_ONLY,
+ .table = mux_table_clk81,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_sel",
+ .ops = &clk_mux_ro_ops,
+ /*
+ * bits 14:12 selects from 8 possible parents:
+ * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+ * fclk_div4, fclk_div3, fclk_div5
+ */
+ .parent_names = clk81_parent_names,
+ .num_parents = ARRAY_SIZE(clk81_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_clk81 = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "clk81",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_div" },
+ .num_parents = 1,
+ .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+ },
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+ "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+ /*
+ * Following these parent clocks, we should also have had mpll2, mpll3
+ * and gp0_pll but these clocks are too precious to be used here. All
+ * the necessary rates for MMC and NAND operation can be acheived using
+ * xtal or fclk_div clocks
+ */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .bit_idx = 23,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &axg_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
+ [CLKID_GP0_PLL] = &axg_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &axg_clk81.hw,
+ [CLKID_MPLL0] = &axg_mpll0.hw,
+ [CLKID_MPLL1] = &axg_mpll1.hw,
+ [CLKID_MPLL2] = &axg_mpll2.hw,
+ [CLKID_MPLL3] = &axg_mpll3.hw,
+ [CLKID_DDR] = &axg_ddr.hw,
+ [CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
+ [CLKID_ISA] = &axg_isa.hw,
+ [CLKID_PL301] = &axg_pl301.hw,
+ [CLKID_PERIPHS] = &axg_periphs.hw,
+ [CLKID_SPICC0] = &axg_spicc_0.hw,
+ [CLKID_I2C] = &axg_i2c.hw,
+ [CLKID_RNG0] = &axg_rng0.hw,
+ [CLKID_UART0] = &axg_uart0.hw,
+ [CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
+ [CLKID_SPICC1] = &axg_spicc_1.hw,
+ [CLKID_PCIE_A] = &axg_pcie_a.hw,
+ [CLKID_PCIE_B] = &axg_pcie_b.hw,
+ [CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
+ [CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
+ [CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
+ [CLKID_DMA] = &axg_dma.hw,
+ [CLKID_SPI] = &axg_spi.hw,
+ [CLKID_AUDIO] = &axg_audio.hw,
+ [CLKID_ETH] = &axg_eth_core.hw,
+ [CLKID_UART1] = &axg_uart1.hw,
+ [CLKID_G2D] = &axg_g2d.hw,
+ [CLKID_USB0] = &axg_usb0.hw,
+ [CLKID_USB1] = &axg_usb1.hw,
+ [CLKID_RESET] = &axg_reset.hw,
+ [CLKID_USB] = &axg_usb_general.hw,
+ [CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
+ [CLKID_EFUSE] = &axg_efuse.hw,
+ [CLKID_BOOT_ROM] = &axg_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
+ [CLKID_VPU_INTR] = &axg_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
+ [CLKID_GIC] = &axg_gic.hw,
+ [CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &axg_ao_iface.hw,
+ [CLKID_AO_I2C] = &axg_ao_i2c.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+ &axg_mpll0,
+ &axg_mpll1,
+ &axg_mpll2,
+ &axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+ &axg_clk81,
+ &axg_ddr,
+ &axg_audio_locker,
+ &axg_mipi_dsi_host,
+ &axg_isa,
+ &axg_pl301,
+ &axg_periphs,
+ &axg_spicc_0,
+ &axg_i2c,
+ &axg_rng0,
+ &axg_uart0,
+ &axg_mipi_dsi_phy,
+ &axg_spicc_1,
+ &axg_pcie_a,
+ &axg_pcie_b,
+ &axg_hiu_reg,
+ &axg_assist_misc,
+ &axg_emmc_b,
+ &axg_emmc_c,
+ &axg_dma,
+ &axg_spi,
+ &axg_audio,
+ &axg_eth_core,
+ &axg_uart1,
+ &axg_g2d,
+ &axg_usb0,
+ &axg_usb1,
+ &axg_reset,
+ &axg_usb_general,
+ &axg_ahb_arb0,
+ &axg_efuse,
+ &axg_boot_rom,
+ &axg_ahb_data_bus,
+ &axg_ahb_ctrl_bus,
+ &axg_usb1_to_ddr,
+ &axg_usb0_to_ddr,
+ &axg_mmc_pclk,
+ &axg_vpu_intr,
+ &axg_sec_ahb_ahb3_bridge,
+ &axg_gic,
+ &axg_ao_media_cpu,
+ &axg_ao_ahb_sram,
+ &axg_ao_ahb_bus,
+ &axg_ao_iface,
+ &axg_ao_i2c,
+ &axg_sd_emmc_b_clk0,
+ &axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+ &axg_mpeg_clk_sel,
+ &axg_sd_emmc_b_clk0_sel,
+ &axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+ &axg_mpeg_clk_div,
+ &axg_sd_emmc_b_clk0_div,
+ &axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+ struct clk_gate *const *clk_gates;
+ unsigned int clk_gates_count;
+ struct meson_clk_mpll *const *clk_mplls;
+ unsigned int clk_mplls_count;
+ struct meson_clk_pll *const *clk_plls;
+ unsigned int clk_plls_count;
+ struct clk_mux *const *clk_muxes;
+ unsigned int clk_muxes_count;
+ struct clk_divider *const *clk_dividers;
+ unsigned int clk_dividers_count;
+ struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+ .clk_gates = axg_clk_gates,
+ .clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+ .clk_mplls = axg_clk_mplls,
+ .clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+ .clk_plls = axg_clk_plls,
+ .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+ .clk_muxes = axg_clk_muxes,
+ .clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+ .clk_dividers = axg_clk_dividers,
+ .clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+ .hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ {}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct clkc_data *clkc_data;
+ struct resource *res;
+ void __iomem *clk_base;
+ int ret, clkid, i;
+
+ clkc_data = of_device_get_match_data(&pdev->dev);
+ if (!clkc_data)
+ return -EINVAL;
+
+ /* Generic clocks and PLLs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(clk_base)) {
+ dev_err(&pdev->dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }
+
+ /* Populate base address for PLLs */
+ for (i = 0; i < clkc_data->clk_plls_count; i++)
+ clkc_data->clk_plls[i]->base = clk_base;
+
+ /* Populate base address for MPLLs */
+ for (i = 0; i < clkc_data->clk_mplls_count; i++)
+ clkc_data->clk_mplls[i]->base = clk_base;
+
+ /* Populate base address for gates */
+ for (i = 0; i < clkc_data->clk_gates_count; i++)
+ clkc_data->clk_gates[i]->reg = clk_base +
+ (u64)clkc_data->clk_gates[i]->reg;
+
+ /* Populate base address for muxes */
+ for (i = 0; i < clkc_data->clk_muxes_count; i++)
+ clkc_data->clk_muxes[i]->reg = clk_base +
+ (u64)clkc_data->clk_muxes[i]->reg;
+
+ /* Populate base address for dividers */
+ for (i = 0; i < clkc_data->clk_dividers_count; i++)
+ clkc_data->clk_dividers[i]->reg = clk_base +
+ (u64)clkc_data->clk_dividers[i]->reg;
+
+ for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ /* array might be sparse */
+ if (!clkc_data->hw_onecell_data->hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev,
+ clkc_data->hw_onecell_data->hws[clkid]);
+ if (ret) {
+ dev_err(&pdev->dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+ .probe = axg_clkc_probe,
+ .driver = {
+ .name = "axg-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL 0x40
+#define HHI_GP0_PLL_CNTL2 0x44
+#define HHI_GP0_PLL_CNTL3 0x48
+#define HHI_GP0_PLL_CNTL4 0x4c
+#define HHI_GP0_PLL_CNTL5 0x50
+#define HHI_GP0_PLL_STS 0x54
+#define HHI_GP0_PLL_CNTL1 0x58
+#define HHI_HIFI_PLL_CNTL 0x80
+#define HHI_HIFI_PLL_CNTL2 0x84
+#define HHI_HIFI_PLL_CNTL3 0x88
+#define HHI_HIFI_PLL_CNTL4 0x8C
+#define HHI_HIFI_PLL_CNTL5 0x90
+#define HHI_HIFI_PLL_STS 0x94
+#define HHI_HIFI_PLL_CNTL1 0x98
+
+#define HHI_XTAL_DIVN_CNTL 0xbc
+#define HHI_GCLK2_MPEG0 0xc0
+#define HHI_GCLK2_MPEG1 0xc4
+#define HHI_GCLK2_MPEG2 0xc8
+#define HHI_GCLK2_OTHER 0xd0
+#define HHI_GCLK2_AO 0xd4
+#define HHI_PCIE_PLL_CNTL 0xd8
+#define HHI_PCIE_PLL_CNTL1 0xdC
+#define HHI_PCIE_PLL_CNTL2 0xe0
+#define HHI_PCIE_PLL_CNTL3 0xe4
+#define HHI_PCIE_PLL_CNTL4 0xe8
+#define HHI_PCIE_PLL_CNTL5 0xec
+#define HHI_PCIE_PLL_CNTL6 0xf0
+#define HHI_PCIE_PLL_STS 0xf4
+
+#define HHI_MEM_PD_REG0 0x100
+#define HHI_VPU_MEM_PD_REG0 0x104
+#define HHI_VIID_CLK_DIV 0x128
+#define HHI_VIID_CLK_CNTL 0x12c
+
+#define HHI_GCLK_MPEG0 0x140
+#define HHI_GCLK_MPEG1 0x144
+#define HHI_GCLK_MPEG2 0x148
+#define HHI_GCLK_OTHER 0x150
+#define HHI_GCLK_AO 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
+#define HHI_SYS_CPU_RESET_CNTL 0x160
+#define HHI_VID_CLK_DIV 0x164
+#define HHI_SPICC_HCLK_CNTL 0x168
+
+#define HHI_MPEG_CLK_CNTL 0x174
+#define HHI_VID_CLK_CNTL 0x17c
+#define HHI_TS_CLK_CNTL 0x190
+#define HHI_VID_CLK_CNTL2 0x194
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c
+#define HHI_VID_PLL_CLK_DIV 0x1a0
+#define HHI_VPU_CLK_CNTL 0x1bC
+
+#define HHI_VAPBCLK_CNTL 0x1F4
+
+#define HHI_GEN_CLK_CNTL 0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL 0x250
+#define HHI_NAND_CLK_CNTL 0x25C
+#define HHI_SD_EMMC_CLK_CNTL 0x264
+
+#define HHI_MPLL_CNTL 0x280
+#define HHI_MPLL_CNTL2 0x284
+#define HHI_MPLL_CNTL3 0x288
+#define HHI_MPLL_CNTL4 0x28C
+#define HHI_MPLL_CNTL5 0x290
+#define HHI_MPLL_CNTL6 0x294
+#define HHI_MPLL_CNTL7 0x298
+#define HHI_MPLL_CNTL8 0x29C
+#define HHI_MPLL_CNTL9 0x2A0
+#define HHI_MPLL_CNTL10 0x2A4
+
+#define HHI_MPLL3_CNTL0 0x2E0
+#define HHI_MPLL3_CNTL1 0x2E4
+#define HHI_PLL_TOP_MISC 0x2E8
+
+#define HHI_SYS_PLL_CNTL1 0x2FC
+#define HHI_SYS_PLL_CNTL 0x300
+#define HHI_SYS_PLL_CNTL2 0x304
+#define HHI_SYS_PLL_CNTL3 0x308
+#define HHI_SYS_PLL_CNTL4 0x30c
+#define HHI_SYS_PLL_CNTL5 0x310
+#define HHI_SYS_PLL_STS 0x314
+#define HHI_DPLL_TOP_I 0x318
+#define HHI_DPLL_TOP2_I 0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL 8
+#define CLKID_MPEG_DIV 9
+#define CLKID_SD_EMMC_B_CLK0_SEL 61
+#define CLKID_SD_EMMC_B_CLK0_DIV 62
+#define CLKID_SD_EMMC_C_CLK0_SEL 63
+#define CLKID_SD_EMMC_C_CLK0_DIV 64
+
+#define NR_CLKS 65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 3/4] clk: meson-axg: add clock controller drivers
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linux-arm-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add clock controller drivers for Amlogic Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg.h | 126 ++++++
5 files changed, 1080 insertions(+)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@ config ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select COMMON_CLK_AXG
select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+ bool
+ depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
+ help
+ Support for the clock controller on AmLogic A113D devices, aka axg.
+ Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+ PLL_RATE(24000000, 56, 1, 2),
+ PLL_RATE(48000000, 64, 1, 2),
+ PLL_RATE(72000000, 72, 1, 2),
+ PLL_RATE(96000000, 64, 1, 2),
+ PLL_RATE(120000000, 80, 1, 2),
+ PLL_RATE(144000000, 96, 1, 2),
+ PLL_RATE(168000000, 56, 1, 1),
+ PLL_RATE(192000000, 64, 1, 1),
+ PLL_RATE(216000000, 72, 1, 1),
+ PLL_RATE(240000000, 80, 1, 1),
+ PLL_RATE(264000000, 88, 1, 1),
+ PLL_RATE(288000000, 96, 1, 1),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(408000000, 68, 1, 2),
+ PLL_RATE(432000000, 72, 1, 2),
+ PLL_RATE(456000000, 76, 1, 2),
+ PLL_RATE(480000000, 80, 1, 2),
+ PLL_RATE(504000000, 84, 1, 2),
+ PLL_RATE(528000000, 88, 1, 2),
+ PLL_RATE(552000000, 92, 1, 2),
+ PLL_RATE(576000000, 96, 1, 2),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(840000000, 70, 1, 1),
+ PLL_RATE(864000000, 72, 1, 1),
+ PLL_RATE(888000000, 74, 1, 1),
+ PLL_RATE(912000000, 76, 1, 1),
+ PLL_RATE(936000000, 78, 1, 1),
+ PLL_RATE(960000000, 80, 1, 1),
+ PLL_RATE(984000000, 82, 1, 1),
+ PLL_RATE(1008000000, 84, 1, 1),
+ PLL_RATE(1032000000, 86, 1, 1),
+ PLL_RATE(1056000000, 88, 1, 1),
+ PLL_RATE(1080000000, 90, 1, 1),
+ PLL_RATE(1104000000, 92, 1, 1),
+ PLL_RATE(1128000000, 94, 1, 1),
+ PLL_RATE(1152000000, 96, 1, 1),
+ PLL_RATE(1176000000, 98, 1, 1),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ PLL_RATE(1656000000, 68, 1, 0),
+ PLL_RATE(1680000000, 68, 1, 0),
+ PLL_RATE(1704000000, 68, 1, 0),
+ PLL_RATE(1728000000, 69, 1, 0),
+ PLL_RATE(1752000000, 69, 1, 0),
+ PLL_RATE(1776000000, 69, 1, 0),
+ PLL_RATE(1800000000, 69, 1, 0),
+ PLL_RATE(1824000000, 70, 1, 0),
+ PLL_RATE(1848000000, 70, 1, 0),
+ PLL_RATE(1872000000, 70, 1, 0),
+ PLL_RATE(1896000000, 70, 1, 0),
+ PLL_RATE(1920000000, 71, 1, 0),
+ PLL_RATE(1944000000, 71, 1, 0),
+ PLL_RATE(1968000000, 71, 1, 0),
+ PLL_RATE(1992000000, 71, 1, 0),
+ PLL_RATE(2016000000, 72, 1, 0),
+ PLL_RATE(2040000000, 72, 1, 0),
+ PLL_RATE(2064000000, 72, 1, 0),
+ PLL_RATE(2088000000, 72, 1, 0),
+ PLL_RATE(2112000000, 73, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .rate_table = sys_pll_rate_table,
+ .rate_count = ARRAY_SIZE(sys_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+ PLL_RATE(240000000, 40, 1, 2),
+ PLL_RATE(246000000, 41, 1, 2),
+ PLL_RATE(252000000, 42, 1, 2),
+ PLL_RATE(258000000, 43, 1, 2),
+ PLL_RATE(264000000, 44, 1, 2),
+ PLL_RATE(270000000, 45, 1, 2),
+ PLL_RATE(276000000, 46, 1, 2),
+ PLL_RATE(282000000, 47, 1, 2),
+ PLL_RATE(288000000, 48, 1, 2),
+ PLL_RATE(294000000, 49, 1, 2),
+ PLL_RATE(300000000, 50, 1, 2),
+ PLL_RATE(306000000, 51, 1, 2),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(318000000, 53, 1, 2),
+ PLL_RATE(324000000, 54, 1, 2),
+ PLL_RATE(330000000, 55, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(342000000, 57, 1, 2),
+ PLL_RATE(348000000, 58, 1, 2),
+ PLL_RATE(354000000, 59, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(366000000, 61, 1, 2),
+ PLL_RATE(372000000, 62, 1, 2),
+ PLL_RATE(378000000, 63, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(390000000, 65, 1, 3),
+ PLL_RATE(396000000, 66, 1, 3),
+ PLL_RATE(402000000, 67, 1, 3),
+ PLL_RATE(408000000, 68, 1, 3),
+ PLL_RATE(480000000, 40, 1, 1),
+ PLL_RATE(492000000, 41, 1, 1),
+ PLL_RATE(504000000, 42, 1, 1),
+ PLL_RATE(516000000, 43, 1, 1),
+ PLL_RATE(528000000, 44, 1, 1),
+ PLL_RATE(540000000, 45, 1, 1),
+ PLL_RATE(552000000, 46, 1, 1),
+ PLL_RATE(564000000, 47, 1, 1),
+ PLL_RATE(576000000, 48, 1, 1),
+ PLL_RATE(588000000, 49, 1, 1),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(612000000, 51, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(636000000, 53, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(660000000, 55, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(684000000, 57, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(708000000, 59, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(732000000, 61, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(756000000, 63, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(780000000, 65, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(804000000, 67, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(960000000, 40, 1, 0),
+ PLL_RATE(984000000, 41, 1, 0),
+ PLL_RATE(1008000000, 42, 1, 0),
+ PLL_RATE(1032000000, 43, 1, 0),
+ PLL_RATE(1056000000, 44, 1, 0),
+ PLL_RATE(1080000000, 45, 1, 0),
+ PLL_RATE(1104000000, 46, 1, 0),
+ PLL_RATE(1128000000, 47, 1, 0),
+ PLL_RATE(1152000000, 48, 1, 0),
+ PLL_RATE(1176000000, 49, 1, 0),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ { /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+ PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+ PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+ PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+ PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+ PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+ PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .params = {
+ .params_table = axg_gp0_params_table,
+ .params_count = ARRAY_SIZE(axg_gp0_params_table),
+ .no_init_reset = true,
+ .reset_lock_loop = true,
+ },
+ .rate_table = axg_gp0_pll_rate_table,
+ .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+ .sdm = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 12,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 11,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 2,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 0,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+ "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+ "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_READ_ONLY,
+ .table = mux_table_clk81,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_sel",
+ .ops = &clk_mux_ro_ops,
+ /*
+ * bits 14:12 selects from 8 possible parents:
+ * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+ * fclk_div4, fclk_div3, fclk_div5
+ */
+ .parent_names = clk81_parent_names,
+ .num_parents = ARRAY_SIZE(clk81_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_clk81 = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "clk81",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_div" },
+ .num_parents = 1,
+ .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+ },
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+ "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+ /*
+ * Following these parent clocks, we should also have had mpll2, mpll3
+ * and gp0_pll but these clocks are too precious to be used here. All
+ * the necessary rates for MMC and NAND operation can be acheived using
+ * xtal or fclk_div clocks
+ */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .bit_idx = 23,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &axg_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
+ [CLKID_GP0_PLL] = &axg_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &axg_clk81.hw,
+ [CLKID_MPLL0] = &axg_mpll0.hw,
+ [CLKID_MPLL1] = &axg_mpll1.hw,
+ [CLKID_MPLL2] = &axg_mpll2.hw,
+ [CLKID_MPLL3] = &axg_mpll3.hw,
+ [CLKID_DDR] = &axg_ddr.hw,
+ [CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
+ [CLKID_ISA] = &axg_isa.hw,
+ [CLKID_PL301] = &axg_pl301.hw,
+ [CLKID_PERIPHS] = &axg_periphs.hw,
+ [CLKID_SPICC0] = &axg_spicc_0.hw,
+ [CLKID_I2C] = &axg_i2c.hw,
+ [CLKID_RNG0] = &axg_rng0.hw,
+ [CLKID_UART0] = &axg_uart0.hw,
+ [CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
+ [CLKID_SPICC1] = &axg_spicc_1.hw,
+ [CLKID_PCIE_A] = &axg_pcie_a.hw,
+ [CLKID_PCIE_B] = &axg_pcie_b.hw,
+ [CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
+ [CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
+ [CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
+ [CLKID_DMA] = &axg_dma.hw,
+ [CLKID_SPI] = &axg_spi.hw,
+ [CLKID_AUDIO] = &axg_audio.hw,
+ [CLKID_ETH] = &axg_eth_core.hw,
+ [CLKID_UART1] = &axg_uart1.hw,
+ [CLKID_G2D] = &axg_g2d.hw,
+ [CLKID_USB0] = &axg_usb0.hw,
+ [CLKID_USB1] = &axg_usb1.hw,
+ [CLKID_RESET] = &axg_reset.hw,
+ [CLKID_USB] = &axg_usb_general.hw,
+ [CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
+ [CLKID_EFUSE] = &axg_efuse.hw,
+ [CLKID_BOOT_ROM] = &axg_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
+ [CLKID_VPU_INTR] = &axg_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
+ [CLKID_GIC] = &axg_gic.hw,
+ [CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &axg_ao_iface.hw,
+ [CLKID_AO_I2C] = &axg_ao_i2c.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+ &axg_mpll0,
+ &axg_mpll1,
+ &axg_mpll2,
+ &axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+ &axg_clk81,
+ &axg_ddr,
+ &axg_audio_locker,
+ &axg_mipi_dsi_host,
+ &axg_isa,
+ &axg_pl301,
+ &axg_periphs,
+ &axg_spicc_0,
+ &axg_i2c,
+ &axg_rng0,
+ &axg_uart0,
+ &axg_mipi_dsi_phy,
+ &axg_spicc_1,
+ &axg_pcie_a,
+ &axg_pcie_b,
+ &axg_hiu_reg,
+ &axg_assist_misc,
+ &axg_emmc_b,
+ &axg_emmc_c,
+ &axg_dma,
+ &axg_spi,
+ &axg_audio,
+ &axg_eth_core,
+ &axg_uart1,
+ &axg_g2d,
+ &axg_usb0,
+ &axg_usb1,
+ &axg_reset,
+ &axg_usb_general,
+ &axg_ahb_arb0,
+ &axg_efuse,
+ &axg_boot_rom,
+ &axg_ahb_data_bus,
+ &axg_ahb_ctrl_bus,
+ &axg_usb1_to_ddr,
+ &axg_usb0_to_ddr,
+ &axg_mmc_pclk,
+ &axg_vpu_intr,
+ &axg_sec_ahb_ahb3_bridge,
+ &axg_gic,
+ &axg_ao_media_cpu,
+ &axg_ao_ahb_sram,
+ &axg_ao_ahb_bus,
+ &axg_ao_iface,
+ &axg_ao_i2c,
+ &axg_sd_emmc_b_clk0,
+ &axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+ &axg_mpeg_clk_sel,
+ &axg_sd_emmc_b_clk0_sel,
+ &axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+ &axg_mpeg_clk_div,
+ &axg_sd_emmc_b_clk0_div,
+ &axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+ struct clk_gate *const *clk_gates;
+ unsigned int clk_gates_count;
+ struct meson_clk_mpll *const *clk_mplls;
+ unsigned int clk_mplls_count;
+ struct meson_clk_pll *const *clk_plls;
+ unsigned int clk_plls_count;
+ struct clk_mux *const *clk_muxes;
+ unsigned int clk_muxes_count;
+ struct clk_divider *const *clk_dividers;
+ unsigned int clk_dividers_count;
+ struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+ .clk_gates = axg_clk_gates,
+ .clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+ .clk_mplls = axg_clk_mplls,
+ .clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+ .clk_plls = axg_clk_plls,
+ .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+ .clk_muxes = axg_clk_muxes,
+ .clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+ .clk_dividers = axg_clk_dividers,
+ .clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+ .hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ {}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct clkc_data *clkc_data;
+ struct resource *res;
+ void __iomem *clk_base;
+ int ret, clkid, i;
+
+ clkc_data = of_device_get_match_data(&pdev->dev);
+ if (!clkc_data)
+ return -EINVAL;
+
+ /* Generic clocks and PLLs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(clk_base)) {
+ dev_err(&pdev->dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }
+
+ /* Populate base address for PLLs */
+ for (i = 0; i < clkc_data->clk_plls_count; i++)
+ clkc_data->clk_plls[i]->base = clk_base;
+
+ /* Populate base address for MPLLs */
+ for (i = 0; i < clkc_data->clk_mplls_count; i++)
+ clkc_data->clk_mplls[i]->base = clk_base;
+
+ /* Populate base address for gates */
+ for (i = 0; i < clkc_data->clk_gates_count; i++)
+ clkc_data->clk_gates[i]->reg = clk_base +
+ (u64)clkc_data->clk_gates[i]->reg;
+
+ /* Populate base address for muxes */
+ for (i = 0; i < clkc_data->clk_muxes_count; i++)
+ clkc_data->clk_muxes[i]->reg = clk_base +
+ (u64)clkc_data->clk_muxes[i]->reg;
+
+ /* Populate base address for dividers */
+ for (i = 0; i < clkc_data->clk_dividers_count; i++)
+ clkc_data->clk_dividers[i]->reg = clk_base +
+ (u64)clkc_data->clk_dividers[i]->reg;
+
+ for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ /* array might be sparse */
+ if (!clkc_data->hw_onecell_data->hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev,
+ clkc_data->hw_onecell_data->hws[clkid]);
+ if (ret) {
+ dev_err(&pdev->dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+ .probe = axg_clkc_probe,
+ .driver = {
+ .name = "axg-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL 0x40
+#define HHI_GP0_PLL_CNTL2 0x44
+#define HHI_GP0_PLL_CNTL3 0x48
+#define HHI_GP0_PLL_CNTL4 0x4c
+#define HHI_GP0_PLL_CNTL5 0x50
+#define HHI_GP0_PLL_STS 0x54
+#define HHI_GP0_PLL_CNTL1 0x58
+#define HHI_HIFI_PLL_CNTL 0x80
+#define HHI_HIFI_PLL_CNTL2 0x84
+#define HHI_HIFI_PLL_CNTL3 0x88
+#define HHI_HIFI_PLL_CNTL4 0x8C
+#define HHI_HIFI_PLL_CNTL5 0x90
+#define HHI_HIFI_PLL_STS 0x94
+#define HHI_HIFI_PLL_CNTL1 0x98
+
+#define HHI_XTAL_DIVN_CNTL 0xbc
+#define HHI_GCLK2_MPEG0 0xc0
+#define HHI_GCLK2_MPEG1 0xc4
+#define HHI_GCLK2_MPEG2 0xc8
+#define HHI_GCLK2_OTHER 0xd0
+#define HHI_GCLK2_AO 0xd4
+#define HHI_PCIE_PLL_CNTL 0xd8
+#define HHI_PCIE_PLL_CNTL1 0xdC
+#define HHI_PCIE_PLL_CNTL2 0xe0
+#define HHI_PCIE_PLL_CNTL3 0xe4
+#define HHI_PCIE_PLL_CNTL4 0xe8
+#define HHI_PCIE_PLL_CNTL5 0xec
+#define HHI_PCIE_PLL_CNTL6 0xf0
+#define HHI_PCIE_PLL_STS 0xf4
+
+#define HHI_MEM_PD_REG0 0x100
+#define HHI_VPU_MEM_PD_REG0 0x104
+#define HHI_VIID_CLK_DIV 0x128
+#define HHI_VIID_CLK_CNTL 0x12c
+
+#define HHI_GCLK_MPEG0 0x140
+#define HHI_GCLK_MPEG1 0x144
+#define HHI_GCLK_MPEG2 0x148
+#define HHI_GCLK_OTHER 0x150
+#define HHI_GCLK_AO 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
+#define HHI_SYS_CPU_RESET_CNTL 0x160
+#define HHI_VID_CLK_DIV 0x164
+#define HHI_SPICC_HCLK_CNTL 0x168
+
+#define HHI_MPEG_CLK_CNTL 0x174
+#define HHI_VID_CLK_CNTL 0x17c
+#define HHI_TS_CLK_CNTL 0x190
+#define HHI_VID_CLK_CNTL2 0x194
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c
+#define HHI_VID_PLL_CLK_DIV 0x1a0
+#define HHI_VPU_CLK_CNTL 0x1bC
+
+#define HHI_VAPBCLK_CNTL 0x1F4
+
+#define HHI_GEN_CLK_CNTL 0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL 0x250
+#define HHI_NAND_CLK_CNTL 0x25C
+#define HHI_SD_EMMC_CLK_CNTL 0x264
+
+#define HHI_MPLL_CNTL 0x280
+#define HHI_MPLL_CNTL2 0x284
+#define HHI_MPLL_CNTL3 0x288
+#define HHI_MPLL_CNTL4 0x28C
+#define HHI_MPLL_CNTL5 0x290
+#define HHI_MPLL_CNTL6 0x294
+#define HHI_MPLL_CNTL7 0x298
+#define HHI_MPLL_CNTL8 0x29C
+#define HHI_MPLL_CNTL9 0x2A0
+#define HHI_MPLL_CNTL10 0x2A4
+
+#define HHI_MPLL3_CNTL0 0x2E0
+#define HHI_MPLL3_CNTL1 0x2E4
+#define HHI_PLL_TOP_MISC 0x2E8
+
+#define HHI_SYS_PLL_CNTL1 0x2FC
+#define HHI_SYS_PLL_CNTL 0x300
+#define HHI_SYS_PLL_CNTL2 0x304
+#define HHI_SYS_PLL_CNTL3 0x308
+#define HHI_SYS_PLL_CNTL4 0x30c
+#define HHI_SYS_PLL_CNTL5 0x310
+#define HHI_SYS_PLL_STS 0x314
+#define HHI_DPLL_TOP_I 0x318
+#define HHI_DPLL_TOP2_I 0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL 8
+#define CLKID_MPEG_DIV 9
+#define CLKID_SD_EMMC_B_CLK0_SEL 61
+#define CLKID_SD_EMMC_B_CLK0_DIV 62
+#define CLKID_SD_EMMC_C_CLK0_SEL 63
+#define CLKID_SD_EMMC_C_CLK0_DIV 64
+
+#define NR_CLKS 65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 3/4] clk: meson-axg: add clock controller drivers
@ 2017-12-07 9:52 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:52 UTC (permalink / raw)
To: linus-amlogic
From: Qiufang Dai <qiufang.dai@amlogic.com>
Add clock controller drivers for Amlogic Meson-AXG SoC.
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/Kconfig.platforms | 1 +
drivers/clk/meson/Kconfig | 8 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/axg.c | 944 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/axg.h | 126 ++++++
5 files changed, 1080 insertions(+)
create mode 100644 drivers/clk/meson/axg.c
create mode 100644 drivers/clk/meson/axg.h
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 2401373565ff..fbedbd8f619a 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -105,6 +105,7 @@ config ARCH_MESON
select PINCTRL_MESON
select COMMON_CLK_AMLOGIC
select COMMON_CLK_GXBB
+ select COMMON_CLK_AXG
select MESON_IRQ_GPIO
help
This enables support for the Amlogic S905 SoCs.
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index d2d0174a6eca..7694302c70a4 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -19,3 +19,11 @@ config COMMON_CLK_GXBB
help
Support for the clock controller on AmLogic S905 devices, aka gxbb.
Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG
+ bool
+ depends on COMMON_CLK_AMLOGIC
+ select RESET_CONTROLLER
+ help
+ Support for the clock controller on AmLogic A113D devices, aka axg.
+ Say Y if you want peripherals and CPU frequency scaling to work.
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index b139d41b25da..3c03ce583798 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
+obj-$(CONFIG_COMMON_CLK_AXG) += axg.o
diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
new file mode 100644
index 000000000000..cba75409f929
--- /dev/null
+++ b/drivers/clk/meson/axg.c
@@ -0,0 +1,944 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * AmLogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 Baylibre SAS.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+#include "clkc.h"
+#include "axg.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static const struct pll_rate_table sys_pll_rate_table[] = {
+ PLL_RATE(24000000, 56, 1, 2),
+ PLL_RATE(48000000, 64, 1, 2),
+ PLL_RATE(72000000, 72, 1, 2),
+ PLL_RATE(96000000, 64, 1, 2),
+ PLL_RATE(120000000, 80, 1, 2),
+ PLL_RATE(144000000, 96, 1, 2),
+ PLL_RATE(168000000, 56, 1, 1),
+ PLL_RATE(192000000, 64, 1, 1),
+ PLL_RATE(216000000, 72, 1, 1),
+ PLL_RATE(240000000, 80, 1, 1),
+ PLL_RATE(264000000, 88, 1, 1),
+ PLL_RATE(288000000, 96, 1, 1),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(408000000, 68, 1, 2),
+ PLL_RATE(432000000, 72, 1, 2),
+ PLL_RATE(456000000, 76, 1, 2),
+ PLL_RATE(480000000, 80, 1, 2),
+ PLL_RATE(504000000, 84, 1, 2),
+ PLL_RATE(528000000, 88, 1, 2),
+ PLL_RATE(552000000, 92, 1, 2),
+ PLL_RATE(576000000, 96, 1, 2),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(840000000, 70, 1, 1),
+ PLL_RATE(864000000, 72, 1, 1),
+ PLL_RATE(888000000, 74, 1, 1),
+ PLL_RATE(912000000, 76, 1, 1),
+ PLL_RATE(936000000, 78, 1, 1),
+ PLL_RATE(960000000, 80, 1, 1),
+ PLL_RATE(984000000, 82, 1, 1),
+ PLL_RATE(1008000000, 84, 1, 1),
+ PLL_RATE(1032000000, 86, 1, 1),
+ PLL_RATE(1056000000, 88, 1, 1),
+ PLL_RATE(1080000000, 90, 1, 1),
+ PLL_RATE(1104000000, 92, 1, 1),
+ PLL_RATE(1128000000, 94, 1, 1),
+ PLL_RATE(1152000000, 96, 1, 1),
+ PLL_RATE(1176000000, 98, 1, 1),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ PLL_RATE(1656000000, 68, 1, 0),
+ PLL_RATE(1680000000, 68, 1, 0),
+ PLL_RATE(1704000000, 68, 1, 0),
+ PLL_RATE(1728000000, 69, 1, 0),
+ PLL_RATE(1752000000, 69, 1, 0),
+ PLL_RATE(1776000000, 69, 1, 0),
+ PLL_RATE(1800000000, 69, 1, 0),
+ PLL_RATE(1824000000, 70, 1, 0),
+ PLL_RATE(1848000000, 70, 1, 0),
+ PLL_RATE(1872000000, 70, 1, 0),
+ PLL_RATE(1896000000, 70, 1, 0),
+ PLL_RATE(1920000000, 71, 1, 0),
+ PLL_RATE(1944000000, 71, 1, 0),
+ PLL_RATE(1968000000, 71, 1, 0),
+ PLL_RATE(1992000000, 71, 1, 0),
+ PLL_RATE(2016000000, 72, 1, 0),
+ PLL_RATE(2040000000, 72, 1, 0),
+ PLL_RATE(2064000000, 72, 1, 0),
+ PLL_RATE(2088000000, 72, 1, 0),
+ PLL_RATE(2112000000, 73, 1, 0),
+ { /* sentinel */ },
+};
+
+static struct meson_clk_pll axg_fixed_pll = {
+ .m = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "fixed_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static struct meson_clk_pll axg_sys_pll = {
+ .m = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_SYS_PLL_CNTL,
+ .shift = 10,
+ .width = 2,
+ },
+ .rate_table = sys_pll_rate_table,
+ .rate_count = ARRAY_SIZE(sys_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ro_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+static const struct pll_rate_table axg_gp0_pll_rate_table[] = {
+ PLL_RATE(240000000, 40, 1, 2),
+ PLL_RATE(246000000, 41, 1, 2),
+ PLL_RATE(252000000, 42, 1, 2),
+ PLL_RATE(258000000, 43, 1, 2),
+ PLL_RATE(264000000, 44, 1, 2),
+ PLL_RATE(270000000, 45, 1, 2),
+ PLL_RATE(276000000, 46, 1, 2),
+ PLL_RATE(282000000, 47, 1, 2),
+ PLL_RATE(288000000, 48, 1, 2),
+ PLL_RATE(294000000, 49, 1, 2),
+ PLL_RATE(300000000, 50, 1, 2),
+ PLL_RATE(306000000, 51, 1, 2),
+ PLL_RATE(312000000, 52, 1, 2),
+ PLL_RATE(318000000, 53, 1, 2),
+ PLL_RATE(324000000, 54, 1, 2),
+ PLL_RATE(330000000, 55, 1, 2),
+ PLL_RATE(336000000, 56, 1, 2),
+ PLL_RATE(342000000, 57, 1, 2),
+ PLL_RATE(348000000, 58, 1, 2),
+ PLL_RATE(354000000, 59, 1, 2),
+ PLL_RATE(360000000, 60, 1, 2),
+ PLL_RATE(366000000, 61, 1, 2),
+ PLL_RATE(372000000, 62, 1, 2),
+ PLL_RATE(378000000, 63, 1, 2),
+ PLL_RATE(384000000, 64, 1, 2),
+ PLL_RATE(390000000, 65, 1, 3),
+ PLL_RATE(396000000, 66, 1, 3),
+ PLL_RATE(402000000, 67, 1, 3),
+ PLL_RATE(408000000, 68, 1, 3),
+ PLL_RATE(480000000, 40, 1, 1),
+ PLL_RATE(492000000, 41, 1, 1),
+ PLL_RATE(504000000, 42, 1, 1),
+ PLL_RATE(516000000, 43, 1, 1),
+ PLL_RATE(528000000, 44, 1, 1),
+ PLL_RATE(540000000, 45, 1, 1),
+ PLL_RATE(552000000, 46, 1, 1),
+ PLL_RATE(564000000, 47, 1, 1),
+ PLL_RATE(576000000, 48, 1, 1),
+ PLL_RATE(588000000, 49, 1, 1),
+ PLL_RATE(600000000, 50, 1, 1),
+ PLL_RATE(612000000, 51, 1, 1),
+ PLL_RATE(624000000, 52, 1, 1),
+ PLL_RATE(636000000, 53, 1, 1),
+ PLL_RATE(648000000, 54, 1, 1),
+ PLL_RATE(660000000, 55, 1, 1),
+ PLL_RATE(672000000, 56, 1, 1),
+ PLL_RATE(684000000, 57, 1, 1),
+ PLL_RATE(696000000, 58, 1, 1),
+ PLL_RATE(708000000, 59, 1, 1),
+ PLL_RATE(720000000, 60, 1, 1),
+ PLL_RATE(732000000, 61, 1, 1),
+ PLL_RATE(744000000, 62, 1, 1),
+ PLL_RATE(756000000, 63, 1, 1),
+ PLL_RATE(768000000, 64, 1, 1),
+ PLL_RATE(780000000, 65, 1, 1),
+ PLL_RATE(792000000, 66, 1, 1),
+ PLL_RATE(804000000, 67, 1, 1),
+ PLL_RATE(816000000, 68, 1, 1),
+ PLL_RATE(960000000, 40, 1, 0),
+ PLL_RATE(984000000, 41, 1, 0),
+ PLL_RATE(1008000000, 42, 1, 0),
+ PLL_RATE(1032000000, 43, 1, 0),
+ PLL_RATE(1056000000, 44, 1, 0),
+ PLL_RATE(1080000000, 45, 1, 0),
+ PLL_RATE(1104000000, 46, 1, 0),
+ PLL_RATE(1128000000, 47, 1, 0),
+ PLL_RATE(1152000000, 48, 1, 0),
+ PLL_RATE(1176000000, 49, 1, 0),
+ PLL_RATE(1200000000, 50, 1, 0),
+ PLL_RATE(1224000000, 51, 1, 0),
+ PLL_RATE(1248000000, 52, 1, 0),
+ PLL_RATE(1272000000, 53, 1, 0),
+ PLL_RATE(1296000000, 54, 1, 0),
+ PLL_RATE(1320000000, 55, 1, 0),
+ PLL_RATE(1344000000, 56, 1, 0),
+ PLL_RATE(1368000000, 57, 1, 0),
+ PLL_RATE(1392000000, 58, 1, 0),
+ PLL_RATE(1416000000, 59, 1, 0),
+ PLL_RATE(1440000000, 60, 1, 0),
+ PLL_RATE(1464000000, 61, 1, 0),
+ PLL_RATE(1488000000, 62, 1, 0),
+ PLL_RATE(1512000000, 63, 1, 0),
+ PLL_RATE(1536000000, 64, 1, 0),
+ PLL_RATE(1560000000, 65, 1, 0),
+ PLL_RATE(1584000000, 66, 1, 0),
+ PLL_RATE(1608000000, 67, 1, 0),
+ PLL_RATE(1632000000, 68, 1, 0),
+ { /* sentinel */ },
+};
+
+struct pll_params_table axg_gp0_params_table[] = {
+ PLL_PARAM(HHI_GP0_PLL_CNTL, 0x40010250),
+ PLL_PARAM(HHI_GP0_PLL_CNTL1, 0xc084a000),
+ PLL_PARAM(HHI_GP0_PLL_CNTL2, 0xb75020be),
+ PLL_PARAM(HHI_GP0_PLL_CNTL3, 0x0a59a288),
+ PLL_PARAM(HHI_GP0_PLL_CNTL4, 0xc000004d),
+ PLL_PARAM(HHI_GP0_PLL_CNTL5, 0x00078000),
+};
+
+static struct meson_clk_pll axg_gp0_pll = {
+ .m = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 0,
+ .width = 9,
+ },
+ .n = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 9,
+ .width = 5,
+ },
+ .od = {
+ .reg_off = HHI_GP0_PLL_CNTL,
+ .shift = 16,
+ .width = 2,
+ },
+ .params = {
+ .params_table = axg_gp0_params_table,
+ .params_count = ARRAY_SIZE(axg_gp0_params_table),
+ .no_init_reset = true,
+ .reset_lock_loop = true,
+ },
+ .rate_table = axg_gp0_pll_rate_table,
+ .rate_count = ARRAY_SIZE(axg_gp0_pll_rate_table),
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "gp0_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ .flags = CLK_GET_RATE_NOCACHE,
+ },
+};
+
+
+static struct clk_fixed_factor axg_fclk_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div2",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div3 = {
+ .mult = 1,
+ .div = 3,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div3",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div4 = {
+ .mult = 1,
+ .div = 4,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div4",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div5 = {
+ .mult = 1,
+ .div = 5,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div5",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor axg_fclk_div7 = {
+ .mult = 1,
+ .div = 7,
+ .hw.init = &(struct clk_init_data){
+ .name = "fclk_div7",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll0 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL7,
+ .shift = 14,
+ .width = 1,
+ },
+ .ssen = {
+ .reg_off = HHI_MPLL_CNTL,
+ .shift = 25,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll0",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll1 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL8,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll1",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll2 = {
+ .sdm = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 0,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 15,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 16,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL_CNTL9,
+ .shift = 14,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll2",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+static struct meson_clk_mpll axg_mpll3 = {
+ .sdm = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 12,
+ .width = 14,
+ },
+ .sdm_en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 11,
+ .width = 1,
+ },
+ .n2 = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 2,
+ .width = 9,
+ },
+ .en = {
+ .reg_off = HHI_MPLL3_CNTL0,
+ .shift = 0,
+ .width = 1,
+ },
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpll3",
+ .ops = &meson_clk_mpll_ops,
+ .parent_names = (const char *[]){ "fixed_pll" },
+ .num_parents = 1,
+ },
+};
+
+/*
+ * FIXME The legacy composite clocks (e.g. clk81) are both PLL post-dividers
+ * and should be modeled with their respective PLLs via the forthcoming
+ * coordinated clock rates feature
+ */
+static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
+static const char * const clk81_parent_names[] = {
+ "xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
+ "fclk_div3", "fclk_div5"
+};
+
+static struct clk_mux axg_mpeg_clk_sel = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 12,
+ .flags = CLK_MUX_READ_ONLY,
+ .table = mux_table_clk81,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_sel",
+ .ops = &clk_mux_ro_ops,
+ /*
+ * bits 14:12 selects from 8 possible parents:
+ * xtal, 1'b0 (wtf), fclk_div7, mpll_clkout1, mpll_clkout2,
+ * fclk_div4, fclk_div3, fclk_div5
+ */
+ .parent_names = clk81_parent_names,
+ .num_parents = ARRAY_SIZE(clk81_parent_names),
+ .flags = CLK_SET_RATE_NO_REPARENT,
+ },
+};
+
+static struct clk_divider axg_mpeg_clk_div = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "mpeg_clk_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_clk81 = {
+ .reg = (void *)HHI_MPEG_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "clk81",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "mpeg_clk_div" },
+ .num_parents = 1,
+ .flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
+ },
+};
+
+static const char * const axg_sd_emmc_clk0_parent_names[] = {
+ "xtal", "fclk_div2", "fclk_div3", "fclk_div5", "fclk_div7",
+
+ /*
+ * Following these parent clocks, we should also have had mpll2, mpll3
+ * and gp0_pll but these clocks are too precious to be used here. All
+ * the necessary rates for MMC and NAND operation can be acheived using
+ * xtal or fclk_div clocks
+ */
+};
+
+/* SDcard clock */
+static struct clk_mux axg_sd_emmc_b_clk0_sel = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 25,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_b_clk0_div = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .shift = 16,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_b_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_b_clk0 = {
+ .reg = (void *)HHI_SD_EMMC_CLK_CNTL,
+ .bit_idx = 23,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_b_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_b_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* EMMC/NAND clock */
+static struct clk_mux axg_sd_emmc_c_clk0_sel = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .mask = 0x7,
+ .shift = 9,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_sel",
+ .ops = &clk_mux_ops,
+ .parent_names = axg_sd_emmc_clk0_parent_names,
+ .num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_names),
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_divider axg_sd_emmc_c_clk0_div = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .shift = 0,
+ .width = 7,
+ .lock = &clk_lock,
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
+ .hw.init = &(struct clk_init_data) {
+ .name = "sd_emmc_c_clk0_div",
+ .ops = &clk_divider_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_sel" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+static struct clk_gate axg_sd_emmc_c_clk0 = {
+ .reg = (void *)HHI_NAND_CLK_CNTL,
+ .bit_idx = 7,
+ .lock = &clk_lock,
+ .hw.init = &(struct clk_init_data){
+ .name = "sd_emmc_c_clk0",
+ .ops = &clk_gate_ops,
+ .parent_names = (const char *[]){ "sd_emmc_c_clk0_div" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
+
+/* Everything Else (EE) domain gates */
+static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
+static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
+static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
+static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
+static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
+static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
+static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
+static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
+static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
+static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
+static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
+static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
+static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
+static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
+static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
+static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
+static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
+static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
+static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
+static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
+
+static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
+static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
+static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
+static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
+static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
+static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
+static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
+static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
+static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
+static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
+static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
+
+static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
+static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
+static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
+static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
+static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
+static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
+static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
+static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+
+/* Always On (AO) domain gates */
+
+static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
+static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
+static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
+static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
+static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
+
+/* Array of all clocks provided by this provider */
+
+static struct clk_hw_onecell_data axg_hw_onecell_data = {
+ .hws = {
+ [CLKID_SYS_PLL] = &axg_sys_pll.hw,
+ [CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
+ [CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
+ [CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
+ [CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
+ [CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
+ [CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
+ [CLKID_GP0_PLL] = &axg_gp0_pll.hw,
+ [CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
+ [CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
+ [CLKID_CLK81] = &axg_clk81.hw,
+ [CLKID_MPLL0] = &axg_mpll0.hw,
+ [CLKID_MPLL1] = &axg_mpll1.hw,
+ [CLKID_MPLL2] = &axg_mpll2.hw,
+ [CLKID_MPLL3] = &axg_mpll3.hw,
+ [CLKID_DDR] = &axg_ddr.hw,
+ [CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
+ [CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
+ [CLKID_ISA] = &axg_isa.hw,
+ [CLKID_PL301] = &axg_pl301.hw,
+ [CLKID_PERIPHS] = &axg_periphs.hw,
+ [CLKID_SPICC0] = &axg_spicc_0.hw,
+ [CLKID_I2C] = &axg_i2c.hw,
+ [CLKID_RNG0] = &axg_rng0.hw,
+ [CLKID_UART0] = &axg_uart0.hw,
+ [CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
+ [CLKID_SPICC1] = &axg_spicc_1.hw,
+ [CLKID_PCIE_A] = &axg_pcie_a.hw,
+ [CLKID_PCIE_B] = &axg_pcie_b.hw,
+ [CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
+ [CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
+ [CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
+ [CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
+ [CLKID_DMA] = &axg_dma.hw,
+ [CLKID_SPI] = &axg_spi.hw,
+ [CLKID_AUDIO] = &axg_audio.hw,
+ [CLKID_ETH] = &axg_eth_core.hw,
+ [CLKID_UART1] = &axg_uart1.hw,
+ [CLKID_G2D] = &axg_g2d.hw,
+ [CLKID_USB0] = &axg_usb0.hw,
+ [CLKID_USB1] = &axg_usb1.hw,
+ [CLKID_RESET] = &axg_reset.hw,
+ [CLKID_USB] = &axg_usb_general.hw,
+ [CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
+ [CLKID_EFUSE] = &axg_efuse.hw,
+ [CLKID_BOOT_ROM] = &axg_boot_rom.hw,
+ [CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
+ [CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
+ [CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
+ [CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
+ [CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
+ [CLKID_VPU_INTR] = &axg_vpu_intr.hw,
+ [CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
+ [CLKID_GIC] = &axg_gic.hw,
+ [CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
+ [CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
+ [CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
+ [CLKID_AO_IFACE] = &axg_ao_iface.hw,
+ [CLKID_AO_I2C] = &axg_ao_i2c.hw,
+ [CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
+ [CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
+ [CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
+ [CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
+ [CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
+ [CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
+ [NR_CLKS] = NULL,
+ },
+ .num = NR_CLKS,
+};
+
+/* Convenience tables to populate base addresses in .probe */
+
+static struct meson_clk_pll *const axg_clk_plls[] = {
+ &axg_fixed_pll,
+ &axg_sys_pll,
+ &axg_gp0_pll,
+};
+
+static struct meson_clk_mpll *const axg_clk_mplls[] = {
+ &axg_mpll0,
+ &axg_mpll1,
+ &axg_mpll2,
+ &axg_mpll3,
+};
+
+static struct clk_gate *const axg_clk_gates[] = {
+ &axg_clk81,
+ &axg_ddr,
+ &axg_audio_locker,
+ &axg_mipi_dsi_host,
+ &axg_isa,
+ &axg_pl301,
+ &axg_periphs,
+ &axg_spicc_0,
+ &axg_i2c,
+ &axg_rng0,
+ &axg_uart0,
+ &axg_mipi_dsi_phy,
+ &axg_spicc_1,
+ &axg_pcie_a,
+ &axg_pcie_b,
+ &axg_hiu_reg,
+ &axg_assist_misc,
+ &axg_emmc_b,
+ &axg_emmc_c,
+ &axg_dma,
+ &axg_spi,
+ &axg_audio,
+ &axg_eth_core,
+ &axg_uart1,
+ &axg_g2d,
+ &axg_usb0,
+ &axg_usb1,
+ &axg_reset,
+ &axg_usb_general,
+ &axg_ahb_arb0,
+ &axg_efuse,
+ &axg_boot_rom,
+ &axg_ahb_data_bus,
+ &axg_ahb_ctrl_bus,
+ &axg_usb1_to_ddr,
+ &axg_usb0_to_ddr,
+ &axg_mmc_pclk,
+ &axg_vpu_intr,
+ &axg_sec_ahb_ahb3_bridge,
+ &axg_gic,
+ &axg_ao_media_cpu,
+ &axg_ao_ahb_sram,
+ &axg_ao_ahb_bus,
+ &axg_ao_iface,
+ &axg_ao_i2c,
+ &axg_sd_emmc_b_clk0,
+ &axg_sd_emmc_c_clk0,
+};
+
+static struct clk_mux *const axg_clk_muxes[] = {
+ &axg_mpeg_clk_sel,
+ &axg_sd_emmc_b_clk0_sel,
+ &axg_sd_emmc_c_clk0_sel,
+};
+
+static struct clk_divider *const axg_clk_dividers[] = {
+ &axg_mpeg_clk_div,
+ &axg_sd_emmc_b_clk0_div,
+ &axg_sd_emmc_c_clk0_div,
+};
+
+struct clkc_data {
+ struct clk_gate *const *clk_gates;
+ unsigned int clk_gates_count;
+ struct meson_clk_mpll *const *clk_mplls;
+ unsigned int clk_mplls_count;
+ struct meson_clk_pll *const *clk_plls;
+ unsigned int clk_plls_count;
+ struct clk_mux *const *clk_muxes;
+ unsigned int clk_muxes_count;
+ struct clk_divider *const *clk_dividers;
+ unsigned int clk_dividers_count;
+ struct clk_hw_onecell_data *hw_onecell_data;
+};
+
+static const struct clkc_data axg_clkc_data = {
+ .clk_gates = axg_clk_gates,
+ .clk_gates_count = ARRAY_SIZE(axg_clk_gates),
+ .clk_mplls = axg_clk_mplls,
+ .clk_mplls_count = ARRAY_SIZE(axg_clk_mplls),
+ .clk_plls = axg_clk_plls,
+ .clk_plls_count = ARRAY_SIZE(axg_clk_plls),
+ .clk_muxes = axg_clk_muxes,
+ .clk_muxes_count = ARRAY_SIZE(axg_clk_muxes),
+ .clk_dividers = axg_clk_dividers,
+ .clk_dividers_count = ARRAY_SIZE(axg_clk_dividers),
+ .hw_onecell_data = &axg_hw_onecell_data,
+};
+
+static const struct of_device_id clkc_match_table[] = {
+ { .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
+ {}
+};
+
+static int axg_clkc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct clkc_data *clkc_data;
+ struct resource *res;
+ void __iomem *clk_base;
+ int ret, clkid, i;
+
+ clkc_data = of_device_get_match_data(&pdev->dev);
+ if (!clkc_data)
+ return -EINVAL;
+
+ /* Generic clocks and PLLs */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ clk_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (IS_ERR(clk_base)) {
+ dev_err(&pdev->dev, "Unable to map clk base\n");
+ return -ENXIO;
+ }
+
+ /* Populate base address for PLLs */
+ for (i = 0; i < clkc_data->clk_plls_count; i++)
+ clkc_data->clk_plls[i]->base = clk_base;
+
+ /* Populate base address for MPLLs */
+ for (i = 0; i < clkc_data->clk_mplls_count; i++)
+ clkc_data->clk_mplls[i]->base = clk_base;
+
+ /* Populate base address for gates */
+ for (i = 0; i < clkc_data->clk_gates_count; i++)
+ clkc_data->clk_gates[i]->reg = clk_base +
+ (u64)clkc_data->clk_gates[i]->reg;
+
+ /* Populate base address for muxes */
+ for (i = 0; i < clkc_data->clk_muxes_count; i++)
+ clkc_data->clk_muxes[i]->reg = clk_base +
+ (u64)clkc_data->clk_muxes[i]->reg;
+
+ /* Populate base address for dividers */
+ for (i = 0; i < clkc_data->clk_dividers_count; i++)
+ clkc_data->clk_dividers[i]->reg = clk_base +
+ (u64)clkc_data->clk_dividers[i]->reg;
+
+ for (clkid = 0; clkid < clkc_data->hw_onecell_data->num; clkid++) {
+ /* array might be sparse */
+ if (!clkc_data->hw_onecell_data->hws[clkid])
+ continue;
+
+ ret = devm_clk_hw_register(dev,
+ clkc_data->hw_onecell_data->hws[clkid]);
+ if (ret) {
+ dev_err(&pdev->dev, "Clock registration failed\n");
+ return ret;
+ }
+ }
+
+ return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+ clkc_data->hw_onecell_data);
+}
+
+static struct platform_driver axg_driver = {
+ .probe = axg_clkc_probe,
+ .driver = {
+ .name = "axg-clkc",
+ .of_match_table = clkc_match_table,
+ },
+};
+
+builtin_platform_driver(axg_driver);
diff --git a/drivers/clk/meson/axg.h b/drivers/clk/meson/axg.h
new file mode 100644
index 000000000000..ce0bafdb6b28
--- /dev/null
+++ b/drivers/clk/meson/axg.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2016 AmLogic, Inc.
+ * Author: Michael Turquette <mturquette@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ *
+ */
+#ifndef __AXG_H
+#define __AXG_H
+
+/*
+ * Clock controller register offsets
+ *
+ * Register offsets from the data sheet must be multiplied by 4 before
+ * adding them to the base address to get the right value.
+ */
+#define HHI_GP0_PLL_CNTL 0x40
+#define HHI_GP0_PLL_CNTL2 0x44
+#define HHI_GP0_PLL_CNTL3 0x48
+#define HHI_GP0_PLL_CNTL4 0x4c
+#define HHI_GP0_PLL_CNTL5 0x50
+#define HHI_GP0_PLL_STS 0x54
+#define HHI_GP0_PLL_CNTL1 0x58
+#define HHI_HIFI_PLL_CNTL 0x80
+#define HHI_HIFI_PLL_CNTL2 0x84
+#define HHI_HIFI_PLL_CNTL3 0x88
+#define HHI_HIFI_PLL_CNTL4 0x8C
+#define HHI_HIFI_PLL_CNTL5 0x90
+#define HHI_HIFI_PLL_STS 0x94
+#define HHI_HIFI_PLL_CNTL1 0x98
+
+#define HHI_XTAL_DIVN_CNTL 0xbc
+#define HHI_GCLK2_MPEG0 0xc0
+#define HHI_GCLK2_MPEG1 0xc4
+#define HHI_GCLK2_MPEG2 0xc8
+#define HHI_GCLK2_OTHER 0xd0
+#define HHI_GCLK2_AO 0xd4
+#define HHI_PCIE_PLL_CNTL 0xd8
+#define HHI_PCIE_PLL_CNTL1 0xdC
+#define HHI_PCIE_PLL_CNTL2 0xe0
+#define HHI_PCIE_PLL_CNTL3 0xe4
+#define HHI_PCIE_PLL_CNTL4 0xe8
+#define HHI_PCIE_PLL_CNTL5 0xec
+#define HHI_PCIE_PLL_CNTL6 0xf0
+#define HHI_PCIE_PLL_STS 0xf4
+
+#define HHI_MEM_PD_REG0 0x100
+#define HHI_VPU_MEM_PD_REG0 0x104
+#define HHI_VIID_CLK_DIV 0x128
+#define HHI_VIID_CLK_CNTL 0x12c
+
+#define HHI_GCLK_MPEG0 0x140
+#define HHI_GCLK_MPEG1 0x144
+#define HHI_GCLK_MPEG2 0x148
+#define HHI_GCLK_OTHER 0x150
+#define HHI_GCLK_AO 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
+#define HHI_SYS_CPU_RESET_CNTL 0x160
+#define HHI_VID_CLK_DIV 0x164
+#define HHI_SPICC_HCLK_CNTL 0x168
+
+#define HHI_MPEG_CLK_CNTL 0x174
+#define HHI_VID_CLK_CNTL 0x17c
+#define HHI_TS_CLK_CNTL 0x190
+#define HHI_VID_CLK_CNTL2 0x194
+#define HHI_SYS_CPU_CLK_CNTL0 0x19c
+#define HHI_VID_PLL_CLK_DIV 0x1a0
+#define HHI_VPU_CLK_CNTL 0x1bC
+
+#define HHI_VAPBCLK_CNTL 0x1F4
+
+#define HHI_GEN_CLK_CNTL 0x228
+
+#define HHI_VDIN_MEAS_CLK_CNTL 0x250
+#define HHI_NAND_CLK_CNTL 0x25C
+#define HHI_SD_EMMC_CLK_CNTL 0x264
+
+#define HHI_MPLL_CNTL 0x280
+#define HHI_MPLL_CNTL2 0x284
+#define HHI_MPLL_CNTL3 0x288
+#define HHI_MPLL_CNTL4 0x28C
+#define HHI_MPLL_CNTL5 0x290
+#define HHI_MPLL_CNTL6 0x294
+#define HHI_MPLL_CNTL7 0x298
+#define HHI_MPLL_CNTL8 0x29C
+#define HHI_MPLL_CNTL9 0x2A0
+#define HHI_MPLL_CNTL10 0x2A4
+
+#define HHI_MPLL3_CNTL0 0x2E0
+#define HHI_MPLL3_CNTL1 0x2E4
+#define HHI_PLL_TOP_MISC 0x2E8
+
+#define HHI_SYS_PLL_CNTL1 0x2FC
+#define HHI_SYS_PLL_CNTL 0x300
+#define HHI_SYS_PLL_CNTL2 0x304
+#define HHI_SYS_PLL_CNTL3 0x308
+#define HHI_SYS_PLL_CNTL4 0x30c
+#define HHI_SYS_PLL_CNTL5 0x310
+#define HHI_SYS_PLL_STS 0x314
+#define HHI_DPLL_TOP_I 0x318
+#define HHI_DPLL_TOP2_I 0x31C
+
+/*
+ * CLKID index values
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/axg-clkc.h. Only the clocks ids we don't want
+ * to expose, such as the internal muxes and dividers of composite clocks,
+ * will remain defined here.
+ */
+#define CLKID_MPEG_SEL 8
+#define CLKID_MPEG_DIV 9
+#define CLKID_SD_EMMC_B_CLK0_SEL 61
+#define CLKID_SD_EMMC_B_CLK0_DIV 62
+#define CLKID_SD_EMMC_C_CLK0_SEL 63
+#define CLKID_SD_EMMC_C_CLK0_DIV 64
+
+#define NR_CLKS 65
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/axg-clkc.h>
+
+#endif /* __AXG_H */
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
2017-12-07 9:52 ` Yixun Lan
(?)
(?)
@ 2017-12-07 9:53 ` Yixun Lan
-1 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:53 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
#address-cells = <0>;
};
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+ clkc: clock-controller@0 {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x320>;
+ };
+ };
+
mailbox: mailbox@ff63dc00 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0xff63dc00 0 0x400>;
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
@ 2017-12-07 9:53 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:53 UTC (permalink / raw)
To: Neil Armstrong, Jerome Brunet, Kevin Hilman
Cc: Rob Herring, Mark Rutland, Michael Turquette, Stephen Boyd,
Carlo Caione, Yixun Lan, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
#address-cells = <0>;
};
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+ clkc: clock-controller@0 {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x320>;
+ };
+ };
+
mailbox: mailbox@ff63dc00 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0xff63dc00 0 0x400>;
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
@ 2017-12-07 9:53 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:53 UTC (permalink / raw)
To: linux-arm-kernel
From: Qiufang Dai <qiufang.dai@amlogic.com>
Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
#address-cells = <0>;
};
+ hiubus: bus at ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+ clkc: clock-controller at 0 {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x320>;
+ };
+ };
+
mailbox: mailbox at ff63dc00 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0xff63dc00 0 0x400>;
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC
@ 2017-12-07 9:53 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-07 9:53 UTC (permalink / raw)
To: linus-amlogic
From: Qiufang Dai <qiufang.dai@amlogic.com>
Try to add Hiubus DT info, and also enable clock DT info
for the Amlogic's Meson-AXG SoC.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index b932a784b02a..c2239c6d6310 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-clkc.h>
/ {
compatible = "amlogic,meson-axg";
@@ -148,6 +149,20 @@
#address-cells = <0>;
};
+ hiubus: bus at ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+
+ clkc: clock-controller at 0 {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x320>;
+ };
+ };
+
mailbox: mailbox at ff63dc00 {
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
reg = <0 0xff63dc00 0 0x400>;
--
2.15.0
^ permalink raw reply related [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
2017-12-07 9:52 ` Yixun Lan
(?)
@ 2017-12-07 22:10 ` Rob Herring
-1 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2017-12-07 22:10 UTC (permalink / raw)
To: Yixun Lan
Cc: Neil Armstrong, Jerome Brunet, Kevin Hilman, Mark Rutland,
Michael Turquette, Stephen Boyd, Carlo Caione, Qiufang Dai,
Jian Hu, linux-amlogic, devicetree, linux-clk, linux-arm-kernel,
linux-kernel
On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Add the required header for the clocks ID dt-bindings
> exported from various subsystem in the Meson-AXG SoC.
>
> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 include/dt-bindings/clock/axg-clkc.h
Please add acks when posting new versions.
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-07 22:10 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2017-12-07 22:10 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Add the required header for the clocks ID dt-bindings
> exported from various subsystem in the Meson-AXG SoC.
>
> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 include/dt-bindings/clock/axg-clkc.h
Please add acks when posting new versions.
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-07 22:10 ` Rob Herring
0 siblings, 0 replies; 38+ messages in thread
From: Rob Herring @ 2017-12-07 22:10 UTC (permalink / raw)
To: linus-amlogic
On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> From: Qiufang Dai <qiufang.dai@amlogic.com>
>
> Add the required header for the clocks ID dt-bindings
> exported from various subsystem in the Meson-AXG SoC.
>
> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 71 insertions(+)
> create mode 100644 include/dt-bindings/clock/axg-clkc.h
Please add acks when posting new versions.
Rob
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
2017-12-07 22:10 ` Rob Herring
(?)
(?)
@ 2017-12-08 1:14 ` Yixun Lan
-1 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 1:14 UTC (permalink / raw)
To: Rob Herring
Cc: yixun.lan, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Mark Rutland, Michael Turquette, Stephen Boyd, Carlo Caione,
Qiufang Dai, Jian Hu, linux-amlogic, devicetree, linux-clk,
linux-arm-kernel, linux-kernel
On 12/08/17 06:10, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Add the required header for the clocks ID dt-bindings
>> exported from various subsystem in the Meson-AXG SoC.
>>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 71 insertions(+)
>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
HI Rob
thanks for the suggestion, I will keep this in mind
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 1:14 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 1:14 UTC (permalink / raw)
To: Rob Herring
Cc: yixun.lan, Neil Armstrong, Jerome Brunet, Kevin Hilman,
Mark Rutland, Michael Turquette, Stephen Boyd, Carlo Caione,
Qiufang Dai, Jian Hu, linux-amlogic, devicetree, linux-clk,
linux-arm-kernel, linux-kernel
On 12/08/17 06:10, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Add the required header for the clocks ID dt-bindings
>> exported from various subsystem in the Meson-AXG SoC.
>>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 71 insertions(+)
>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
HI Rob
thanks for the suggestion, I will keep this in mind
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 1:14 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 1:14 UTC (permalink / raw)
To: linux-arm-kernel
On 12/08/17 06:10, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Add the required header for the clocks ID dt-bindings
>> exported from various subsystem in the Meson-AXG SoC.
>>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 71 insertions(+)
>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
HI Rob
thanks for the suggestion, I will keep this in mind
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 1:14 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 1:14 UTC (permalink / raw)
To: linus-amlogic
On 12/08/17 06:10, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>
>> Add the required header for the clocks ID dt-bindings
>> exported from various subsystem in the Meson-AXG SoC.
>>
>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>> ---
>> include/dt-bindings/clock/axg-clkc.h | 71 ++++++++++++++++++++++++++++++++++++
>> 1 file changed, 71 insertions(+)
>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
HI Rob
thanks for the suggestion, I will keep this in mind
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
2017-12-07 22:10 ` Rob Herring
(?)
(?)
@ 2017-12-08 9:33 ` Jerome Brunet
-1 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 9:33 UTC (permalink / raw)
To: Rob Herring, Yixun Lan
Cc: Neil Armstrong, Kevin Hilman, Mark Rutland, Michael Turquette,
Stephen Boyd, Carlo Caione, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> > From: Qiufang Dai <qiufang.dai@amlogic.com>
> >
> > Add the required header for the clocks ID dt-bindings
> > exported from various subsystem in the Meson-AXG SoC.
> >
> > Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> > ---
> > include/dt-bindings/clock/axg-clkc.h | 71
> > ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 71 insertions(+)
> > create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
> Rob
Yixun, please be consistent about this. Maintainers are not going to dig
through your previous revision to collect Tags
I believe Neil acked patch 3, didn't he ?
Please resend your series with the Tags collected
If not already done, please make sure patches 1-3 apply on top of rc1 and patch
4 on Kevin's dt64 branch.
Thanks
Jerome
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 9:33 ` Jerome Brunet
0 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 9:33 UTC (permalink / raw)
To: Rob Herring, Yixun Lan
Cc: Neil Armstrong, Kevin Hilman, Mark Rutland, Michael Turquette,
Stephen Boyd, Carlo Caione, Qiufang Dai, Jian Hu,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> > From: Qiufang Dai <qiufang.dai-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
> >
> > Add the required header for the clocks ID dt-bindings
> > exported from various subsystem in the Meson-AXG SoC.
> >
> > Signed-off-by: Qiufang Dai <qiufang.dai-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
> > Signed-off-by: Yixun Lan <yixun.lan-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
> > ---
> > include/dt-bindings/clock/axg-clkc.h | 71
> > ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 71 insertions(+)
> > create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
> Rob
Yixun, please be consistent about this. Maintainers are not going to dig
through your previous revision to collect Tags
I believe Neil acked patch 3, didn't he ?
Please resend your series with the Tags collected
If not already done, please make sure patches 1-3 apply on top of rc1 and patch
4 on Kevin's dt64 branch.
Thanks
Jerome
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 9:33 ` Jerome Brunet
0 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 9:33 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> > From: Qiufang Dai <qiufang.dai@amlogic.com>
> >
> > Add the required header for the clocks ID dt-bindings
> > exported from various subsystem in the Meson-AXG SoC.
> >
> > Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> > ---
> > include/dt-bindings/clock/axg-clkc.h | 71
> > ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 71 insertions(+)
> > create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
> Rob
Yixun, please be consistent about this. Maintainers are not going to dig
through your previous revision to collect Tags
I believe Neil acked patch 3, didn't he ?
Please resend your series with the Tags collected
If not already done, please make sure patches 1-3 apply on top of rc1 and patch
4 on Kevin's dt64 branch.
Thanks
Jerome
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 9:33 ` Jerome Brunet
0 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 9:33 UTC (permalink / raw)
To: linus-amlogic
On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
> > From: Qiufang Dai <qiufang.dai@amlogic.com>
> >
> > Add the required header for the clocks ID dt-bindings
> > exported from various subsystem in the Meson-AXG SoC.
> >
> > Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
> > Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> > ---
> > include/dt-bindings/clock/axg-clkc.h | 71
> > ++++++++++++++++++++++++++++++++++++
> > 1 file changed, 71 insertions(+)
> > create mode 100644 include/dt-bindings/clock/axg-clkc.h
>
> Please add acks when posting new versions.
>
> Rob
Yixun, please be consistent about this. Maintainers are not going to dig
through your previous revision to collect Tags
I believe Neil acked patch 3, didn't he ?
Please resend your series with the Tags collected
If not already done, please make sure patches 1-3 apply on top of rc1 and patch
4 on Kevin's dt64 branch.
Thanks
Jerome
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 14:22 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 14:22 UTC (permalink / raw)
To: Jerome Brunet, Rob Herring
Cc: yixun.lan, Neil Armstrong, Kevin Hilman, Mark Rutland,
Michael Turquette, Stephen Boyd, Carlo Caione, Qiufang Dai,
Jian Hu, linux-amlogic, devicetree, linux-clk, linux-arm-kernel,
linux-kernel
On 12/08/17 17:33, Jerome Brunet wrote:
> On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
>> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>>
>>> Add the required header for the clocks ID dt-bindings
>>> exported from various subsystem in the Meson-AXG SoC.
>>>
>>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>> ---
>>> include/dt-bindings/clock/axg-clkc.h | 71
>>> ++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 71 insertions(+)
>>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>>
>> Please add acks when posting new versions.
>>
>> Rob
>
> Yixun, please be consistent about this. Maintainers are not going to dig
> through your previous revision to collect Tags
>
> I believe Neil acked patch 3, didn't he ?
>
> Please resend your series with the Tags collected
sorry, I missed Neil's ACK for the pacth [3/4]
let's just wait for a few more days, to see if there are more comments
coming up, then I would fold them together
> If not already done, please make sure patches 1-3 apply on top of rc1 and patch
> 4 on Kevin's dt64 branch.
>
the above is already base on -rc2, and patch 4 can apply to kevin's dt64
cleanly
> Thanks
> Jerome
>
> .
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 14:22 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 14:22 UTC (permalink / raw)
To: Jerome Brunet, Rob Herring
Cc: yixun.lan-LpR1jeaWuhtBDgjK7y7TUQ, Neil Armstrong, Kevin Hilman,
Mark Rutland, Michael Turquette, Stephen Boyd, Carlo Caione,
Qiufang Dai, Jian Hu,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-clk-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 12/08/17 17:33, Jerome Brunet wrote:
> On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
>> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>>> From: Qiufang Dai <qiufang.dai-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
>>>
>>> Add the required header for the clocks ID dt-bindings
>>> exported from various subsystem in the Meson-AXG SoC.
>>>
>>> Signed-off-by: Qiufang Dai <qiufang.dai-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
>>> Signed-off-by: Yixun Lan <yixun.lan-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org>
>>> ---
>>> include/dt-bindings/clock/axg-clkc.h | 71
>>> ++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 71 insertions(+)
>>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>>
>> Please add acks when posting new versions.
>>
>> Rob
>
> Yixun, please be consistent about this. Maintainers are not going to dig
> through your previous revision to collect Tags
>
> I believe Neil acked patch 3, didn't he ?
>
> Please resend your series with the Tags collected
sorry, I missed Neil's ACK for the pacth [3/4]
let's just wait for a few more days, to see if there are more comments
coming up, then I would fold them together
> If not already done, please make sure patches 1-3 apply on top of rc1 and patch
> 4 on Kevin's dt64 branch.
>
the above is already base on -rc2, and patch 4 can apply to kevin's dt64
cleanly
> Thanks
> Jerome
>
> .
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 14:22 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 14:22 UTC (permalink / raw)
To: linux-arm-kernel
On 12/08/17 17:33, Jerome Brunet wrote:
> On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
>> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>>
>>> Add the required header for the clocks ID dt-bindings
>>> exported from various subsystem in the Meson-AXG SoC.
>>>
>>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>> ---
>>> include/dt-bindings/clock/axg-clkc.h | 71
>>> ++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 71 insertions(+)
>>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>>
>> Please add acks when posting new versions.
>>
>> Rob
>
> Yixun, please be consistent about this. Maintainers are not going to dig
> through your previous revision to collect Tags
>
> I believe Neil acked patch 3, didn't he ?
>
> Please resend your series with the Tags collected
sorry, I missed Neil's ACK for the pacth [3/4]
let's just wait for a few more days, to see if there are more comments
coming up, then I would fold them together
> If not already done, please make sure patches 1-3 apply on top of rc1 and patch
> 4 on Kevin's dt64 branch.
>
the above is already base on -rc2, and patch 4 can apply to kevin's dt64
cleanly
> Thanks
> Jerome
>
> .
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 14:22 ` Yixun Lan
0 siblings, 0 replies; 38+ messages in thread
From: Yixun Lan @ 2017-12-08 14:22 UTC (permalink / raw)
To: linus-amlogic
On 12/08/17 17:33, Jerome Brunet wrote:
> On Thu, 2017-12-07 at 16:10 -0600, Rob Herring wrote:
>> On Thu, Dec 07, 2017 at 05:52:58PM +0800, Yixun Lan wrote:
>>> From: Qiufang Dai <qiufang.dai@amlogic.com>
>>>
>>> Add the required header for the clocks ID dt-bindings
>>> exported from various subsystem in the Meson-AXG SoC.
>>>
>>> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
>>> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
>>> ---
>>> include/dt-bindings/clock/axg-clkc.h | 71
>>> ++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 71 insertions(+)
>>> create mode 100644 include/dt-bindings/clock/axg-clkc.h
>>
>> Please add acks when posting new versions.
>>
>> Rob
>
> Yixun, please be consistent about this. Maintainers are not going to dig
> through your previous revision to collect Tags
>
> I believe Neil acked patch 3, didn't he ?
>
> Please resend your series with the Tags collected
sorry, I missed Neil's ACK for the pacth [3/4]
let's just wait for a few more days, to see if there are more comments
coming up, then I would fold them together
> If not already done, please make sure patches 1-3 apply on top of rc1 and patch
> 4 on Kevin's dt64 branch.
>
the above is already base on -rc2, and patch 4 can apply to kevin's dt64
cleanly
> Thanks
> Jerome
>
> .
>
^ permalink raw reply [flat|nested] 38+ messages in thread
* Re: [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
2017-12-08 14:22 ` Yixun Lan
(?)
@ 2017-12-08 14:27 ` Jerome Brunet
-1 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 14:27 UTC (permalink / raw)
To: Yixun Lan, Rob Herring
Cc: Neil Armstrong, Kevin Hilman, Mark Rutland, Michael Turquette,
Stephen Boyd, Carlo Caione, Qiufang Dai, Jian Hu, linux-amlogic,
devicetree, linux-clk, linux-arm-kernel, linux-kernel
On Fri, 2017-12-08 at 22:22 +0800, Yixun Lan wrote:
> let's just wait for a few more days, to see if there are more comments
> coming up, then I would fold them together
That's up to you. Keep in mind that rc4 is coming up and I'll need some time
to test/verify the final version
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 14:27 ` Jerome Brunet
0 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 14:27 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 2017-12-08 at 22:22 +0800, Yixun Lan wrote:
> let's just wait for a few more days, to see if there are more comments
> coming up, then I would fold them together
That's up to you. Keep in mind that rc4 is coming up and I'll need some time
to test/verify the final version
^ permalink raw reply [flat|nested] 38+ messages in thread
* [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header
@ 2017-12-08 14:27 ` Jerome Brunet
0 siblings, 0 replies; 38+ messages in thread
From: Jerome Brunet @ 2017-12-08 14:27 UTC (permalink / raw)
To: linus-amlogic
On Fri, 2017-12-08 at 22:22 +0800, Yixun Lan wrote:
> let's just wait for a few more days, to see if there are more comments
> coming up, then I would fold them together
That's up to you. Keep in mind that rc4 is coming up and I'll need some time
to test/verify the final version
^ permalink raw reply [flat|nested] 38+ messages in thread
end of thread, other threads:[~2017-12-08 14:28 UTC | newest]
Thread overview: 38+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-07 9:52 [PATCH v5 0/4] add clk controller driver for Meson-AXG SoC Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` [PATCH v5 1/4] dt-bindings: clock: add compatible variant for the Meson-AXG Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` [PATCH v5 2/4] clk: meson-axg: add clocks dt-bindings required header Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 22:10 ` Rob Herring
2017-12-07 22:10 ` Rob Herring
2017-12-07 22:10 ` Rob Herring
2017-12-08 1:14 ` Yixun Lan
2017-12-08 1:14 ` Yixun Lan
2017-12-08 1:14 ` Yixun Lan
2017-12-08 1:14 ` Yixun Lan
2017-12-08 9:33 ` Jerome Brunet
2017-12-08 9:33 ` Jerome Brunet
2017-12-08 9:33 ` Jerome Brunet
2017-12-08 9:33 ` Jerome Brunet
2017-12-08 14:22 ` Yixun Lan
2017-12-08 14:22 ` Yixun Lan
2017-12-08 14:22 ` Yixun Lan
2017-12-08 14:22 ` Yixun Lan
2017-12-08 14:27 ` Jerome Brunet
2017-12-08 14:27 ` Jerome Brunet
2017-12-08 14:27 ` Jerome Brunet
2017-12-07 9:52 ` [PATCH v5 3/4] clk: meson-axg: add clock controller drivers Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:52 ` Yixun Lan
2017-12-07 9:53 ` [PATCH v5 4/4] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC Yixun Lan
2017-12-07 9:53 ` Yixun Lan
2017-12-07 9:53 ` Yixun Lan
2017-12-07 9:53 ` Yixun Lan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.