* [PATCH igt] igt/tools_test: Check the tools exist before executing
@ 2017-12-12 17:22 Chris Wilson
2017-12-12 17:39 ` ✓ Fi.CI.BAT: success for " Patchwork
` (10 more replies)
0 siblings, 11 replies; 17+ messages in thread
From: Chris Wilson @ 2017-12-12 17:22 UTC (permalink / raw)
To: intel-gfx
As a simple fail-safe against a bad installation, check the tools exist
before testing whether they work.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
tests/tools_test.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/tests/tools_test.c b/tests/tools_test.c
index 6aea7a8a4..a4fc68e8b 100644
--- a/tests/tools_test.c
+++ b/tests/tools_test.c
@@ -26,6 +26,9 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
+#include <unistd.h>
+
+#define TOOLS "../tools/"
struct line_check {
int found;
@@ -112,17 +115,13 @@ igt_main
}
igt_subtest("tools_test") {
- char *cmd;
-
- igt_assert(asprintf(&cmd,
- "../tools/intel_reg read 0x4030")
- != -1);
- igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
- free(cmd);
-
- igt_assert(asprintf(&cmd, "../tools/intel_reg dump")
- != -1);
- igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
- free(cmd);
+ igt_require(access(TOOLS "intel_reg_read", X_OK) == 0);
+ igt_require(access(TOOLS "intel_reg_dump", X_OK) == 0);
+
+ igt_assert_eq(igt_system_quiet(TOOLS "intel_reg read 0x4030"),
+ IGT_EXIT_SUCCESS);
+
+ igt_assert_eq(igt_system_quiet(TOOLS "intel_reg dump"),
+ IGT_EXIT_SUCCESS);
}
}
--
2.15.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 17+ messages in thread
* ✓ Fi.CI.BAT: success for igt/tools_test: Check the tools exist before executing
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
@ 2017-12-12 17:39 ` Patchwork
2017-12-12 18:45 ` ✗ Fi.CI.IGT: warning " Patchwork
` (9 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-12 17:39 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing
URL : https://patchwork.freedesktop.org/series/35237/
State : success
== Summary ==
IGT patchset tested on top of latest successful build
74407418720ff7a9de7caabec05d4c3afe9a5c51 igt/kms_flip: Allow very large bo to fail pageflips with E2BIG
with latest DRM-Tip kernel build CI_DRM_3501
f49a92217adc drm-tip: 2017y-12m-12d-12h-12m-26s UTC integration manifest
No testlist changes.
Test debugfs_test:
Subgroup read_all_entries:
dmesg-warn -> PASS (fi-elk-e7500) fdo#103989 +1
Test gem_exec_suspend:
Subgroup basic-s3:
incomplete -> PASS (fi-glk-1) fdo#103326
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
pass -> DMESG-WARN (fi-kbl-r) fdo#104172 +1
fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
fdo#103326 https://bugs.freedesktop.org/show_bug.cgi?id=103326
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#104172 https://bugs.freedesktop.org/show_bug.cgi?id=104172
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:435s
fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:448s
fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:382s
fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:511s
fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:280s
fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:508s
fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:512s
fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:491s
fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:478s
fi-elk-e7500 total:224 pass:163 dwarn:15 dfail:0 fail:0 skip:45
fi-gdg-551 total:288 pass:178 dwarn:1 dfail:0 fail:1 skip:108 time:270s
fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:539s
fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:374s
fi-hsw-4770r total:288 pass:224 dwarn:0 dfail:0 fail:0 skip:64 time:259s
fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:394s
fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:473s
fi-ivb-3770 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:450s
fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:485s
fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:527s
fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:472s
fi-kbl-r total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:528s
fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:591s
fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:460s
fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:535s
fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:567s
fi-skl-6700k total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:518s
fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:498s
fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:451s
fi-snb-2520m total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:547s
fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:417s
Blacklisted hosts:
fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:599s
fi-cnl-y total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:634s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_658/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* ✗ Fi.CI.IGT: warning for igt/tools_test: Check the tools exist before executing
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
2017-12-12 17:39 ` ✓ Fi.CI.BAT: success for " Patchwork
@ 2017-12-12 18:45 ` Patchwork
2017-12-13 9:53 ` [PATCH igt] " Petri Latvala
` (8 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-12 18:45 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing
URL : https://patchwork.freedesktop.org/series/35237/
State : warning
== Summary ==
Test kms_frontbuffer_tracking:
Subgroup fbc-1p-offscren-pri-shrfb-draw-render:
pass -> FAIL (shard-snb) fdo#101623
Test drm_read:
Subgroup short-buffer-block:
pass -> SKIP (shard-hsw)
Test kms_properties:
Subgroup crtc-properties-atomic:
pass -> SKIP (shard-hsw) fdo#103706
Test kms_busy:
Subgroup extended-modeset-hang-oldfb-render-c:
pass -> SKIP (shard-hsw)
Test tools_test:
Subgroup tools_test:
pass -> SKIP (shard-snb)
pass -> SKIP (shard-hsw)
Test gem_tiled_swapping:
Subgroup non-threaded:
incomplete -> PASS (shard-snb) fdo#104009
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#103706 https://bugs.freedesktop.org/show_bug.cgi?id=103706
fdo#104009 https://bugs.freedesktop.org/show_bug.cgi?id=104009
shard-hsw total:2712 pass:1533 dwarn:1 dfail:0 fail:10 skip:1168 time:9488s
shard-snb total:2712 pass:1308 dwarn:1 dfail:0 fail:12 skip:1391 time:8111s
Blacklisted hosts:
shard-apl total:2618 pass:1617 dwarn:1 dfail:0 fail:23 skip:976 time:12974s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_658/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt] igt/tools_test: Check the tools exist before executing
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
2017-12-12 17:39 ` ✓ Fi.CI.BAT: success for " Patchwork
2017-12-12 18:45 ` ✗ Fi.CI.IGT: warning " Patchwork
@ 2017-12-13 9:53 ` Petri Latvala
2017-12-13 10:48 ` Joonas Lahtinen
` (7 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Petri Latvala @ 2017-12-13 9:53 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
On Tue, Dec 12, 2017 at 05:22:01PM +0000, Chris Wilson wrote:
> As a simple fail-safe against a bad installation, check the tools exist
> before testing whether they work.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> ---
> tests/tools_test.c | 23 +++++++++++------------
> 1 file changed, 11 insertions(+), 12 deletions(-)
>
> diff --git a/tests/tools_test.c b/tests/tools_test.c
> index 6aea7a8a4..a4fc68e8b 100644
> --- a/tests/tools_test.c
> +++ b/tests/tools_test.c
> @@ -26,6 +26,9 @@
> #include <sys/types.h>
> #include <sys/stat.h>
> #include <fcntl.h>
> +#include <unistd.h>
> +
> +#define TOOLS "../tools/"
>
> struct line_check {
> int found;
> @@ -112,17 +115,13 @@ igt_main
> }
>
> igt_subtest("tools_test") {
> - char *cmd;
> -
> - igt_assert(asprintf(&cmd,
> - "../tools/intel_reg read 0x4030")
> - != -1);
> - igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
> - free(cmd);
> -
> - igt_assert(asprintf(&cmd, "../tools/intel_reg dump")
> - != -1);
> - igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
> - free(cmd);
> + igt_require(access(TOOLS "intel_reg_read", X_OK) == 0);
> + igt_require(access(TOOLS "intel_reg_dump", X_OK) == 0);
> +
> + igt_assert_eq(igt_system_quiet(TOOLS "intel_reg read 0x4030"),
> + IGT_EXIT_SUCCESS);
> +
> + igt_assert_eq(igt_system_quiet(TOOLS "intel_reg dump"),
> + IGT_EXIT_SUCCESS);
> }
> }
This whole test needs some loving in the form of a helper to find an
executable in $srcdir/tools or $bindir, like igt_fopen_data(), but
that can be left for later.
Can you also add the same check in the l3 parity subtest?
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt] igt/tools_test: Check the tools exist before executing
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (2 preceding siblings ...)
2017-12-13 9:53 ` [PATCH igt] " Petri Latvala
@ 2017-12-13 10:48 ` Joonas Lahtinen
2017-12-13 14:56 ` [PATCH igt v2] " Chris Wilson
` (6 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Joonas Lahtinen @ 2017-12-13 10:48 UTC (permalink / raw)
To: Chris Wilson, intel-gfx
On Tue, 2017-12-12 at 17:22 +0000, Chris Wilson wrote:
> As a simple fail-safe against a bad installation, check the tools exist
> before testing whether they work.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Regards, Joonas
--
Joonas Lahtinen
Open Source Technology Center
Intel Corporation
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH igt v2] igt/tools_test: Check the tools exist before executing
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (3 preceding siblings ...)
2017-12-13 10:48 ` Joonas Lahtinen
@ 2017-12-13 14:56 ` Chris Wilson
2017-12-14 11:11 ` Petri Latvala
2017-12-13 17:16 ` ✓ Fi.CI.BAT: success for igt/tools_test: Check the tools exist before executing (rev2) Patchwork
` (5 subsequent siblings)
10 siblings, 1 reply; 17+ messages in thread
From: Chris Wilson @ 2017-12-13 14:56 UTC (permalink / raw)
To: intel-gfx
As a simple fail-safe against a bad installation, check the tools exist
before testing whether they work.
v2: Check intel_l3_parity as well
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
---
tests/tools_test.c | 48 +++++++++++++++++++++++++++++-------------------
1 file changed, 29 insertions(+), 19 deletions(-)
diff --git a/tests/tools_test.c b/tests/tools_test.c
index 6aea7a8a4..4183456e2 100644
--- a/tests/tools_test.c
+++ b/tests/tools_test.c
@@ -26,6 +26,10 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
+#include <libgen.h>
+#include <unistd.h>
+
+#define TOOLS "../tools/"
struct line_check {
int found;
@@ -59,10 +63,19 @@ igt_main
{
igt_skip_on_simulation();
+ igt_fixture {
+ char path[4096];
+
+ if (readlink("/proc/self/exe", path, sizeof(path)) > 0)
+ chdir(dirname(path));
+ }
+
igt_subtest("sysfs_l3_parity") {
int exec_return;
struct line_check line;
+ igt_require(access(TOOLS "intel_l3_parity", X_OK) == 0);
+
/* Sanity check that l3 parity tool is usable: Enable
* row,bank,subbank 0,0,0.
*
@@ -71,27 +84,28 @@ igt_main
* piglit.
*/
igt_system_cmd(exec_return,
- "../tools/intel_l3_parity -r 0 -b 0 "
+ TOOLS "intel_l3_parity -r 0 -b 0 "
"-s 0 -e");
assert_cmd_success(exec_return);
/* Disable row,bank,subbank 0,0,0. */
- igt_system_cmd(exec_return, "../tools/intel_l3_parity -r 0 -b 0 "
+ igt_system_cmd(exec_return,
+ TOOLS "intel_l3_parity -r 0 -b 0 "
"-s 0 -d");
assert_cmd_success(exec_return);
/* Check that disabling was successful */
- igt_system_cmd(exec_return, "../tools/intel_l3_parity -l");
+ igt_system_cmd(exec_return,
+ TOOLS "intel_l3_parity -l");
assert_cmd_success(exec_return);
line.substr = "Row 0, Bank 0, Subbank 0 is disabled";
line.found = 0;
- igt_log_buffer_inspect(check_cmd_output,
- &line);
+ igt_log_buffer_inspect(check_cmd_output, &line);
igt_assert_eq(line.found, 1);
/* Re-enable row,bank,subbank 0,0,0 */
igt_system_cmd(exec_return,
- "../tools/intel_l3_parity -r 0 -b 0 "
+ TOOLS "intel_l3_parity -r 0 -b 0 "
"-s 0 -e");
assert_cmd_success(exec_return);
@@ -102,7 +116,8 @@ igt_main
* The previously printed line is already in the log
* buffer so we check for count 1.
*/
- igt_system_cmd(exec_return, "../tools/intel_l3_parity -l");
+ igt_system_cmd(exec_return,
+ TOOLS "intel_l3_parity -l");
assert_cmd_success(exec_return);
line.substr = "Row 0, Bank 0, Subbank 0 is disabled";
line.found = 0;
@@ -112,17 +127,12 @@ igt_main
}
igt_subtest("tools_test") {
- char *cmd;
-
- igt_assert(asprintf(&cmd,
- "../tools/intel_reg read 0x4030")
- != -1);
- igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
- free(cmd);
-
- igt_assert(asprintf(&cmd, "../tools/intel_reg dump")
- != -1);
- igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
- free(cmd);
+ igt_require(access(TOOLS "intel_reg", X_OK) == 0);
+
+ igt_assert_eq(igt_system_quiet(TOOLS "intel_reg read 0x4030"),
+ IGT_EXIT_SUCCESS);
+
+ igt_assert_eq(igt_system_quiet(TOOLS "intel_reg dump"),
+ IGT_EXIT_SUCCESS);
}
}
--
2.15.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 17+ messages in thread
* ✓ Fi.CI.BAT: success for igt/tools_test: Check the tools exist before executing (rev2)
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (4 preceding siblings ...)
2017-12-13 14:56 ` [PATCH igt v2] " Chris Wilson
@ 2017-12-13 17:16 ` Patchwork
2017-12-13 18:59 ` ✗ Fi.CI.IGT: warning " Patchwork
` (4 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-13 17:16 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing (rev2)
URL : https://patchwork.freedesktop.org/series/35237/
State : success
== Summary ==
IGT patchset tested on top of latest successful build
4112f30aedbb252bf8cdd27dbba485c0458faca7 igt/gem_shrink: Exercise allocations in the middle of execbuf under oom-pressure
with latest DRM-Tip kernel build CI_DRM_3508
1a717c76c96c drm-tip: 2017y-12m-13d-14h-48m-36s UTC integration manifest
No testlist changes.
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-WARN (fi-kbl-r) fdo#104172 +1
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#104172 https://bugs.freedesktop.org/show_bug.cgi?id=104172
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:441s
fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:444s
fi-blb-e6850 total:288 pass:223 dwarn:1 dfail:0 fail:0 skip:64 time:387s
fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:515s
fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:281s
fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:503s
fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:512s
fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:490s
fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:473s
fi-elk-e7500 total:224 pass:163 dwarn:15 dfail:0 fail:0 skip:45
fi-gdg-551 total:288 pass:178 dwarn:1 dfail:0 fail:1 skip:108 time:268s
fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:542s
fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:409s
fi-hsw-4770r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:416s
fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:393s
fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:479s
fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:434s
fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:488s
fi-kbl-7560u total:288 pass:269 dwarn:0 dfail:0 fail:0 skip:19 time:530s
fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:476s
fi-kbl-r total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:534s
fi-pnv-d510 total:288 pass:222 dwarn:1 dfail:0 fail:0 skip:65 time:582s
fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:446s
fi-skl-6600u total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:544s
fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:565s
fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:496s
fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:445s
fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:549s
fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:418s
Blacklisted hosts:
fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:598s
fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:491s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_665/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* ✗ Fi.CI.IGT: warning for igt/tools_test: Check the tools exist before executing (rev2)
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (5 preceding siblings ...)
2017-12-13 17:16 ` ✓ Fi.CI.BAT: success for igt/tools_test: Check the tools exist before executing (rev2) Patchwork
@ 2017-12-13 18:59 ` Patchwork
2017-12-14 11:39 ` [PATCH igt v3] igt/tools_test: Check the tools exist before executing Chris Wilson
` (3 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-13 18:59 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing (rev2)
URL : https://patchwork.freedesktop.org/series/35237/
State : warning
== Summary ==
Test kms_flip:
Subgroup plain-flip-fb-recreate-interruptible:
pass -> FAIL (shard-hsw) fdo#100368
Test kms_frontbuffer_tracking:
Subgroup fbc-suspend:
pass -> SKIP (shard-hsw) fdo#103540
Subgroup fbc-1p-offscren-pri-shrfb-draw-blt:
fail -> PASS (shard-snb) fdo#101623
Test tools_test:
Subgroup tools_test:
pass -> SKIP (shard-snb)
pass -> SKIP (shard-hsw)
Subgroup sysfs_l3_parity:
pass -> SKIP (shard-hsw)
Test kms_cursor_crc:
Subgroup cursor-256x256-suspend:
skip -> PASS (shard-snb) fdo#103375
Test gem_eio:
Subgroup in-flight-contexts:
pass -> DMESG-FAIL (shard-snb) fdo#104058 +1
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103540 https://bugs.freedesktop.org/show_bug.cgi?id=103540
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#104058 https://bugs.freedesktop.org/show_bug.cgi?id=104058
shard-hsw total:2712 pass:1533 dwarn:1 dfail:0 fail:11 skip:1167 time:9413s
shard-snb total:2712 pass:1307 dwarn:2 dfail:1 fail:11 skip:1391 time:8127s
Blacklisted hosts:
shard-apl total:2712 pass:1686 dwarn:1 dfail:0 fail:23 skip:1002 time:13856s
shard-kbl total:2712 pass:1807 dwarn:1 dfail:0 fail:24 skip:880 time:11160s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_665/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt v2] igt/tools_test: Check the tools exist before executing
2017-12-13 14:56 ` [PATCH igt v2] " Chris Wilson
@ 2017-12-14 11:11 ` Petri Latvala
2017-12-14 11:14 ` Chris Wilson
0 siblings, 1 reply; 17+ messages in thread
From: Petri Latvala @ 2017-12-14 11:11 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
On Wed, Dec 13, 2017 at 02:56:10PM +0000, Chris Wilson wrote:
> As a simple fail-safe against a bad installation, check the tools exist
> before testing whether they work.
>
> v2: Check intel_l3_parity as well
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Reviewed-by: Petri Latvala <petri.latvala@intel.com>
> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> ---
> tests/tools_test.c | 48 +++++++++++++++++++++++++++++-------------------
> 1 file changed, 29 insertions(+), 19 deletions(-)
>
> diff --git a/tests/tools_test.c b/tests/tools_test.c
> index 6aea7a8a4..4183456e2 100644
> --- a/tests/tools_test.c
> +++ b/tests/tools_test.c
> @@ -26,6 +26,10 @@
> #include <sys/types.h>
> #include <sys/stat.h>
> #include <fcntl.h>
> +#include <libgen.h>
> +#include <unistd.h>
> +
> +#define TOOLS "../tools/"
>
> struct line_check {
> int found;
> @@ -59,10 +63,19 @@ igt_main
> {
> igt_skip_on_simulation();
>
> + igt_fixture {
> + char path[4096];
> +
> + if (readlink("/proc/self/exe", path, sizeof(path)) > 0)
> + chdir(dirname(path));
> + }
Why the chdir?
CI runs tests with IGT installed (make install). The test's directory
is $libexecdir/intel-gpu-tools/, ../tools is $libexecdir/tools and
that doesn't exist.
--
Petri Latvala
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt v2] igt/tools_test: Check the tools exist before executing
2017-12-14 11:11 ` Petri Latvala
@ 2017-12-14 11:14 ` Chris Wilson
2017-12-14 11:20 ` Petri Latvala
0 siblings, 1 reply; 17+ messages in thread
From: Chris Wilson @ 2017-12-14 11:14 UTC (permalink / raw)
To: Petri Latvala; +Cc: intel-gfx
Quoting Petri Latvala (2017-12-14 11:11:47)
> On Wed, Dec 13, 2017 at 02:56:10PM +0000, Chris Wilson wrote:
> > As a simple fail-safe against a bad installation, check the tools exist
> > before testing whether they work.
> >
> > v2: Check intel_l3_parity as well
> >
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
> > Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> > Reviewed-by: Petri Latvala <petri.latvala@intel.com>
> > Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
> > ---
> > tests/tools_test.c | 48 +++++++++++++++++++++++++++++-------------------
> > 1 file changed, 29 insertions(+), 19 deletions(-)
> >
> > diff --git a/tests/tools_test.c b/tests/tools_test.c
> > index 6aea7a8a4..4183456e2 100644
> > --- a/tests/tools_test.c
> > +++ b/tests/tools_test.c
> > @@ -26,6 +26,10 @@
> > #include <sys/types.h>
> > #include <sys/stat.h>
> > #include <fcntl.h>
> > +#include <libgen.h>
> > +#include <unistd.h>
> > +
> > +#define TOOLS "../tools/"
> >
> > struct line_check {
> > int found;
> > @@ -59,10 +63,19 @@ igt_main
> > {
> > igt_skip_on_simulation();
> >
> > + igt_fixture {
> > + char path[4096];
> > +
> > + if (readlink("/proc/self/exe", path, sizeof(path)) > 0)
> > + chdir(dirname(path));
> > + }
>
>
> Why the chdir?
For me, I was trying to standardise the test, since "../tools" bakes in
so many assumptions that simply aren't true when one invokes
$path/tools_test. Back to the igt_data_dir() request.
> CI runs tests with IGT installed (make install). The test's directory
> is $libexecdir/intel-gpu-tools/, ../tools is $libexecdir/tools and
> that doesn't exist.
So where was it expecting to find the tools?
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt v2] igt/tools_test: Check the tools exist before executing
2017-12-14 11:14 ` Chris Wilson
@ 2017-12-14 11:20 ` Petri Latvala
2017-12-14 11:24 ` Chris Wilson
0 siblings, 1 reply; 17+ messages in thread
From: Petri Latvala @ 2017-12-14 11:20 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
On Thu, Dec 14, 2017 at 11:14:35AM +0000, Chris Wilson wrote:
> >
> > Why the chdir?
>
> For me, I was trying to standardise the test, since "../tools" bakes in
> so many assumptions that simply aren't true when one invokes
> $path/tools_test. Back to the igt_data_dir() request.
Aye, the assumption is bad and should get changed to support both run
methods (within build dir, with installed). Currently it works by
carefully setting up the CI deployment so paths match. =(
>
> > CI runs tests with IGT installed (make install). The test's directory
> > is $libexecdir/intel-gpu-tools/, ../tools is $libexecdir/tools and
> > that doesn't exist.
>
> So where was it expecting to find the tools?
CI deploys the tools next to piglit. $cwd is piglit's directory when
running through piglit, tools are deployed to $piglit/../tools.
--
Petri Latvala
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt v2] igt/tools_test: Check the tools exist before executing
2017-12-14 11:20 ` Petri Latvala
@ 2017-12-14 11:24 ` Chris Wilson
2017-12-14 12:39 ` Petri Latvala
0 siblings, 1 reply; 17+ messages in thread
From: Chris Wilson @ 2017-12-14 11:24 UTC (permalink / raw)
To: Petri Latvala; +Cc: intel-gfx
Quoting Petri Latvala (2017-12-14 11:20:18)
> On Thu, Dec 14, 2017 at 11:14:35AM +0000, Chris Wilson wrote:
> > >
> > > Why the chdir?
> >
> > For me, I was trying to standardise the test, since "../tools" bakes in
> > so many assumptions that simply aren't true when one invokes
> > $path/tools_test. Back to the igt_data_dir() request.
>
> Aye, the assumption is bad and should get changed to support both run
> methods (within build dir, with installed). Currently it works by
> carefully setting up the CI deployment so paths match. =(
>
> >
> > > CI runs tests with IGT installed (make install). The test's directory
> > > is $libexecdir/intel-gpu-tools/, ../tools is $libexecdir/tools and
> > > that doesn't exist.
> >
> > So where was it expecting to find the tools?
>
>
> CI deploys the tools next to piglit. $cwd is piglit's directory when
> running through piglit, tools are deployed to $piglit/../tools.
How about
if (access("../tools/", F_OK)) {
chdir();
}
Got to love temporary hacks.
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH igt v3] igt/tools_test: Check the tools exist before executing
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (6 preceding siblings ...)
2017-12-13 18:59 ` ✗ Fi.CI.IGT: warning " Patchwork
@ 2017-12-14 11:39 ` Chris Wilson
2017-12-14 11:57 ` ✗ Fi.CI.BAT: warning for igt/tools_test: Check the tools exist before executing (rev3) Patchwork
` (2 subsequent siblings)
10 siblings, 0 replies; 17+ messages in thread
From: Chris Wilson @ 2017-12-14 11:39 UTC (permalink / raw)
To: intel-gfx
As a simple fail-safe against a bad installation, check the tools exist
before testing whether they work.
v2: Check intel_l3_parity as well
v3: Hunt for tools/
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102935
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Petri Latvala <petri.latvala@intel.com> #v1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1
---
tests/tools_test.c | 53 ++++++++++++++++++++++++++++++++++-------------------
1 file changed, 34 insertions(+), 19 deletions(-)
diff --git a/tests/tools_test.c b/tests/tools_test.c
index 6aea7a8a4..a0025bedf 100644
--- a/tests/tools_test.c
+++ b/tests/tools_test.c
@@ -26,6 +26,10 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
+#include <libgen.h>
+#include <unistd.h>
+
+#define TOOLS "../tools/"
struct line_check {
int found;
@@ -59,10 +63,24 @@ igt_main
{
igt_skip_on_simulation();
+ igt_fixture {
+ char path[4096];
+
+ /* Try to guess where the TOOLS are! */
+ if (access(TOOLS, F_OK) &&
+ readlink("/proc/self/exe", path, sizeof(path)) > 0)
+ chdir(dirname(path));
+
+ igt_require_f(chdir(TOOLS) == 0,
+ "Unable to determine the tools directory, expecting them in $cwd/" TOOLS " or $path/" TOOLS "\n");
+ }
+
igt_subtest("sysfs_l3_parity") {
int exec_return;
struct line_check line;
+ igt_require(access("intel_l3_parity", X_OK) == 0);
+
/* Sanity check that l3 parity tool is usable: Enable
* row,bank,subbank 0,0,0.
*
@@ -71,27 +89,28 @@ igt_main
* piglit.
*/
igt_system_cmd(exec_return,
- "../tools/intel_l3_parity -r 0 -b 0 "
+ "./intel_l3_parity -r 0 -b 0 "
"-s 0 -e");
assert_cmd_success(exec_return);
/* Disable row,bank,subbank 0,0,0. */
- igt_system_cmd(exec_return, "../tools/intel_l3_parity -r 0 -b 0 "
+ igt_system_cmd(exec_return,
+ "./intel_l3_parity -r 0 -b 0 "
"-s 0 -d");
assert_cmd_success(exec_return);
/* Check that disabling was successful */
- igt_system_cmd(exec_return, "../tools/intel_l3_parity -l");
+ igt_system_cmd(exec_return,
+ "./intel_l3_parity -l");
assert_cmd_success(exec_return);
line.substr = "Row 0, Bank 0, Subbank 0 is disabled";
line.found = 0;
- igt_log_buffer_inspect(check_cmd_output,
- &line);
+ igt_log_buffer_inspect(check_cmd_output, &line);
igt_assert_eq(line.found, 1);
/* Re-enable row,bank,subbank 0,0,0 */
igt_system_cmd(exec_return,
- "../tools/intel_l3_parity -r 0 -b 0 "
+ "./intel_l3_parity -r 0 -b 0 "
"-s 0 -e");
assert_cmd_success(exec_return);
@@ -102,7 +121,8 @@ igt_main
* The previously printed line is already in the log
* buffer so we check for count 1.
*/
- igt_system_cmd(exec_return, "../tools/intel_l3_parity -l");
+ igt_system_cmd(exec_return,
+ "./intel_l3_parity -l");
assert_cmd_success(exec_return);
line.substr = "Row 0, Bank 0, Subbank 0 is disabled";
line.found = 0;
@@ -112,17 +132,12 @@ igt_main
}
igt_subtest("tools_test") {
- char *cmd;
-
- igt_assert(asprintf(&cmd,
- "../tools/intel_reg read 0x4030")
- != -1);
- igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
- free(cmd);
-
- igt_assert(asprintf(&cmd, "../tools/intel_reg dump")
- != -1);
- igt_assert(igt_system_quiet(cmd) == IGT_EXIT_SUCCESS);
- free(cmd);
+ igt_require(access("intel_reg", X_OK) == 0);
+
+ igt_assert_eq(igt_system_quiet("./intel_reg read 0x4030"),
+ IGT_EXIT_SUCCESS);
+
+ igt_assert_eq(igt_system_quiet("./intel_reg dump"),
+ IGT_EXIT_SUCCESS);
}
}
--
2.15.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 17+ messages in thread
* ✗ Fi.CI.BAT: warning for igt/tools_test: Check the tools exist before executing (rev3)
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (7 preceding siblings ...)
2017-12-14 11:39 ` [PATCH igt v3] igt/tools_test: Check the tools exist before executing Chris Wilson
@ 2017-12-14 11:57 ` Patchwork
2017-12-14 21:57 ` ✓ Fi.CI.BAT: success " Patchwork
2017-12-14 23:38 ` ✗ Fi.CI.IGT: failure " Patchwork
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-14 11:57 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing (rev3)
URL : https://patchwork.freedesktop.org/series/35237/
State : warning
== Summary ==
IGT patchset tested on top of latest successful build
103af7286e2d1014e3d7126691fe046ab2c9f73e lib: Ask the kernel to quiesce the GPU
with latest DRM-Tip kernel build CI_DRM_3516
91d06d0bbd1a drm-tip: 2017y-12m-14d-09h-49m-51s UTC integration manifest
No testlist changes.
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_busy:
Subgroup basic-flip-a:
pass -> DMESG-WARN (fi-elk-e7500) fdo#103989
Test kms_psr_sink_crc:
Subgroup psr_basic:
dmesg-warn -> PASS (fi-skl-6700hq) fdo#101144
Test drv_module_reload:
Subgroup basic-reload-inject:
pass -> DMESG-WARN (fi-bsw-n3050)
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
fdo#101144 https://bugs.freedesktop.org/show_bug.cgi?id=101144
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:435s
fi-blb-e6850 total:288 pass:222 dwarn:1 dfail:1 fail:0 skip:64 time:394s
fi-bsw-n3050 total:288 pass:241 dwarn:1 dfail:0 fail:0 skip:46 time:508s
fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:279s
fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:501s
fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:499s
fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:484s
fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:477s
fi-elk-e7500 total:224 pass:163 dwarn:15 dfail:0 fail:0 skip:45
fi-gdg-551 total:288 pass:178 dwarn:1 dfail:0 fail:1 skip:108 time:266s
fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:531s
fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:416s
fi-hsw-4770r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:413s
fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:390s
fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:468s
fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:426s
fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:482s
fi-kbl-7560u total:288 pass:268 dwarn:1 dfail:0 fail:0 skip:19 time:523s
fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:468s
fi-kbl-r total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:523s
fi-pnv-d510 total:288 pass:221 dwarn:1 dfail:0 fail:1 skip:65 time:593s
fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:440s
fi-skl-6600u total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:538s
fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:560s
fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:489s
fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:450s
fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:558s
fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:419s
Blacklisted hosts:
fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:597s
fi-cnl-y total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:619s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_668/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH igt v2] igt/tools_test: Check the tools exist before executing
2017-12-14 11:24 ` Chris Wilson
@ 2017-12-14 12:39 ` Petri Latvala
0 siblings, 0 replies; 17+ messages in thread
From: Petri Latvala @ 2017-12-14 12:39 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
On 12/14/2017 01:24 PM, Chris Wilson wrote:
> Quoting Petri Latvala (2017-12-14 11:20:18)
>> On Thu, Dec 14, 2017 at 11:14:35AM +0000, Chris Wilson wrote:
>>>> Why the chdir?
>>> For me, I was trying to standardise the test, since "../tools" bakes in
>>> so many assumptions that simply aren't true when one invokes
>>> $path/tools_test. Back to the igt_data_dir() request.
>> Aye, the assumption is bad and should get changed to support both run
>> methods (within build dir, with installed). Currently it works by
>> carefully setting up the CI deployment so paths match. =(
>>
>>>
>>>> CI runs tests with IGT installed (make install). The test's directory
>>>> is $libexecdir/intel-gpu-tools/, ../tools is $libexecdir/tools and
>>>> that doesn't exist.
>>> So where was it expecting to find the tools?
>>
>> CI deploys the tools next to piglit. $cwd is piglit's directory when
>> running through piglit, tools are deployed to $piglit/../tools.
> How about
>
> if (access("../tools/", F_OK)) {
> chdir();
> }
>
Should be fine that way. Add a TODO comment somewhere about finding the
directory for real.
--
Petri Latvala
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* ✓ Fi.CI.BAT: success for igt/tools_test: Check the tools exist before executing (rev3)
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (8 preceding siblings ...)
2017-12-14 11:57 ` ✗ Fi.CI.BAT: warning for igt/tools_test: Check the tools exist before executing (rev3) Patchwork
@ 2017-12-14 21:57 ` Patchwork
2017-12-14 23:38 ` ✗ Fi.CI.IGT: failure " Patchwork
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-14 21:57 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing (rev3)
URL : https://patchwork.freedesktop.org/series/35237/
State : success
== Summary ==
IGT patchset tested on top of latest successful build
103af7286e2d1014e3d7126691fe046ab2c9f73e lib: Ask the kernel to quiesce the GPU
with latest DRM-Tip kernel build CI_DRM_3521
ad43db157c69 drm-tip: 2017y-12m-14d-20h-09m-53s UTC integration manifest
No testlist changes.
Test debugfs_test:
Subgroup read_all_entries:
dmesg-fail -> DMESG-WARN (fi-elk-e7500) fdo#103989 +1
incomplete -> PASS (fi-snb-2520m) fdo#103713
Test gem_sync:
Subgroup basic-each:
skip -> PASS (fi-blb-e6850)
Subgroup basic-many-each:
skip -> PASS (fi-blb-e6850)
Subgroup basic-store-all:
skip -> PASS (fi-blb-e6850)
Subgroup basic-store-each:
skip -> PASS (fi-blb-e6850)
Test gem_tiled_blits:
Subgroup basic:
skip -> PASS (fi-blb-e6850)
Test gem_tiled_fence_blits:
Subgroup basic:
skip -> PASS (fi-blb-e6850)
Test gem_wait:
Subgroup basic-busy-all:
skip -> PASS (fi-blb-e6850)
Subgroup basic-wait-all:
skip -> PASS (fi-blb-e6850)
Subgroup basic-await-all:
skip -> PASS (fi-blb-e6850)
Test kms_busy:
Subgroup basic-flip-a:
skip -> PASS (fi-blb-e6850)
Subgroup basic-flip-b:
skip -> PASS (fi-blb-e6850)
Test kms_cursor_legacy:
Subgroup basic-busy-flip-before-cursor-legacy:
skip -> PASS (fi-blb-e6850)
Test kms_psr_sink_crc:
Subgroup psr_basic:
dmesg-warn -> PASS (fi-skl-6700hq) fdo#101144
fdo#103989 https://bugs.freedesktop.org/show_bug.cgi?id=103989
fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713
fdo#101144 https://bugs.freedesktop.org/show_bug.cgi?id=101144
fi-bdw-5557u total:288 pass:267 dwarn:0 dfail:0 fail:0 skip:21 time:437s
fi-bdw-gvtdvm total:288 pass:264 dwarn:0 dfail:0 fail:0 skip:24 time:440s
fi-blb-e6850 total:288 pass:222 dwarn:1 dfail:1 fail:0 skip:64 time:395s
fi-bsw-n3050 total:288 pass:242 dwarn:0 dfail:0 fail:0 skip:46 time:518s
fi-bwr-2160 total:288 pass:183 dwarn:0 dfail:0 fail:0 skip:105 time:281s
fi-bxt-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:500s
fi-bxt-j4205 total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:502s
fi-byt-j1900 total:288 pass:253 dwarn:0 dfail:0 fail:0 skip:35 time:486s
fi-byt-n2820 total:288 pass:249 dwarn:0 dfail:0 fail:0 skip:39 time:469s
fi-elk-e7500 total:224 pass:163 dwarn:15 dfail:0 fail:0 skip:45
fi-gdg-551 total:288 pass:178 dwarn:1 dfail:0 fail:1 skip:108 time:266s
fi-glk-1 total:288 pass:260 dwarn:0 dfail:0 fail:0 skip:28 time:533s
fi-hsw-4770 total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:408s
fi-hsw-4770r total:288 pass:261 dwarn:0 dfail:0 fail:0 skip:27 time:415s
fi-ilk-650 total:288 pass:228 dwarn:0 dfail:0 fail:0 skip:60 time:394s
fi-ivb-3520m total:288 pass:259 dwarn:0 dfail:0 fail:0 skip:29 time:477s
fi-ivb-3770 total:288 pass:255 dwarn:0 dfail:0 fail:0 skip:33 time:428s
fi-kbl-7500u total:288 pass:263 dwarn:1 dfail:0 fail:0 skip:24 time:481s
fi-kbl-7560u total:288 pass:268 dwarn:1 dfail:0 fail:0 skip:19 time:524s
fi-kbl-7567u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:467s
fi-kbl-r total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:521s
fi-pnv-d510 total:288 pass:221 dwarn:1 dfail:0 fail:1 skip:65 time:602s
fi-skl-6260u total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:443s
fi-skl-6600u total:288 pass:260 dwarn:1 dfail:0 fail:0 skip:27 time:532s
fi-skl-6700hq total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:556s
fi-skl-6770hq total:288 pass:268 dwarn:0 dfail:0 fail:0 skip:20 time:491s
fi-skl-gvtdvm total:288 pass:265 dwarn:0 dfail:0 fail:0 skip:23 time:451s
fi-snb-2520m total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:554s
fi-snb-2600 total:288 pass:248 dwarn:0 dfail:0 fail:0 skip:40 time:416s
Blacklisted hosts:
fi-cfl-s2 total:288 pass:262 dwarn:0 dfail:0 fail:0 skip:26 time:604s
fi-glk-dsi total:288 pass:258 dwarn:0 dfail:0 fail:0 skip:30 time:480s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_674/issues.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* ✗ Fi.CI.IGT: failure for igt/tools_test: Check the tools exist before executing (rev3)
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
` (9 preceding siblings ...)
2017-12-14 21:57 ` ✓ Fi.CI.BAT: success " Patchwork
@ 2017-12-14 23:38 ` Patchwork
10 siblings, 0 replies; 17+ messages in thread
From: Patchwork @ 2017-12-14 23:38 UTC (permalink / raw)
To: Chris Wilson; +Cc: intel-gfx
== Series Details ==
Series: igt/tools_test: Check the tools exist before executing (rev3)
URL : https://patchwork.freedesktop.org/series/35237/
State : failure
== Summary ==
Test kms_cursor_legacy:
Subgroup flip-vs-cursor-toggle:
pass -> FAIL (shard-hsw) fdo#102670
Test gem_wait:
Subgroup await-render:
pass -> FAIL (shard-hsw)
Test kms_flip:
Subgroup plain-flip-ts-check-interruptible:
pass -> FAIL (shard-hsw) fdo#100368
Subgroup vblank-vs-suspend:
incomplete -> PASS (shard-hsw) fdo#103375
Test drv_module_reload:
Subgroup basic-reload-inject:
pass -> DMESG-WARN (shard-snb) fdo#102707
Test gvt_basic:
Subgroup invalid-placeholder-test:
skip -> DMESG-FAIL (shard-snb)
Test kms_frontbuffer_tracking:
Subgroup fbcpsr-1p-primscrn-spr-indfb-move:
skip -> INCOMPLETE (shard-snb)
Subgroup fbc-1p-offscren-pri-shrfb-draw-render:
fail -> PASS (shard-snb) fdo#101623
Test gem_tiled_swapping:
Subgroup non-threaded:
dmesg-warn -> PASS (shard-hsw) fdo#104218 +1
fdo#102670 https://bugs.freedesktop.org/show_bug.cgi?id=102670
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103375 https://bugs.freedesktop.org/show_bug.cgi?id=103375
fdo#102707 https://bugs.freedesktop.org/show_bug.cgi?id=102707
fdo#101623 https://bugs.freedesktop.org/show_bug.cgi?id=101623
fdo#104218 https://bugs.freedesktop.org/show_bug.cgi?id=104218
shard-hsw total:2712 pass:1534 dwarn:1 dfail:0 fail:13 skip:1164 time:9445s
shard-snb total:2700 pass:1302 dwarn:2 dfail:1 fail:11 skip:1383 time:7738s
Blacklisted hosts:
shard-apl total:2712 pass:1671 dwarn:1 dfail:0 fail:23 skip:1017 time:13793s
shard-kbl total:2712 pass:1757 dwarn:47 dfail:2 fail:29 skip:877 time:11273s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_674/shards.html
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2017-12-14 23:38 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-12-12 17:22 [PATCH igt] igt/tools_test: Check the tools exist before executing Chris Wilson
2017-12-12 17:39 ` ✓ Fi.CI.BAT: success for " Patchwork
2017-12-12 18:45 ` ✗ Fi.CI.IGT: warning " Patchwork
2017-12-13 9:53 ` [PATCH igt] " Petri Latvala
2017-12-13 10:48 ` Joonas Lahtinen
2017-12-13 14:56 ` [PATCH igt v2] " Chris Wilson
2017-12-14 11:11 ` Petri Latvala
2017-12-14 11:14 ` Chris Wilson
2017-12-14 11:20 ` Petri Latvala
2017-12-14 11:24 ` Chris Wilson
2017-12-14 12:39 ` Petri Latvala
2017-12-13 17:16 ` ✓ Fi.CI.BAT: success for igt/tools_test: Check the tools exist before executing (rev2) Patchwork
2017-12-13 18:59 ` ✗ Fi.CI.IGT: warning " Patchwork
2017-12-14 11:39 ` [PATCH igt v3] igt/tools_test: Check the tools exist before executing Chris Wilson
2017-12-14 11:57 ` ✗ Fi.CI.BAT: warning for igt/tools_test: Check the tools exist before executing (rev3) Patchwork
2017-12-14 21:57 ` ✓ Fi.CI.BAT: success " Patchwork
2017-12-14 23:38 ` ✗ Fi.CI.IGT: failure " Patchwork
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.